Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Sultan
Ghani
Regulatory Considerations
Regulatory requirements in various countries Pre- and post-marketing requirements Guidelines vs Regulations
European Regulatory Agency Adopted ICH guidelines, but practical implementation may differ Wide range of other guidelines generated by the CPMP included in the EU Directives and Regulations (65/65 EEC, 75/318 EEC, 91/507 EEC)
European Regulatory Agency (contd) CPMP Guidelines Stability testing of existing active substances and related finished product
Apply to chemically active substance previously approved in EU and product, except radiopharmaceuticals or biological Refer to ICH guidelines on stability testing of new active substances and products Consideration on pharmacopoeial monographs with respect to stability data requirements of active ingredients
2.
Accelerated 40C 2C 75% RH 5% 6-month data Long-term 25 C 2C 60% RH 5% 6-month data Three pilot-scale batches, same synthetic route (6month accelerated, 12-month long- term)
(contd)
(contd)
Data requirements depend on particular circumstances. Normal extrapolation of data will be allowed (e.g. up to two times of real time data up to a limit of 3 years)
FDA
Stability Testing for Abbreviated New Drug Application (21 CFR 31492 31499) Consideration for a reduction in the amount of stability required for an ANDA as compared to an NDA Dosage forms are classified as simple or not simple For simple dosage forms, the requirement is liberal For not simple dosage forms, the requirements are less liberal
FDA (contd)
Drug Substance (stability submission) Appropriate referenced DMF Stability data on pilot-scale batch (restriction on design, equipment, process with exception of capacity) For fermentation product, three production batches, two of which should be generated from different starter cultures Stress-testing if not performed previously Same composition and type of container, closure and liner, but smaller in size
FDA (contd)
Drug Product The ANDA data package is based on various factors, such as complexity, existence of sufficient information, etc. ANDA data package recommendations are For simple dosage form
0, 1, 2, 3 months at controlled room temperature 25C Accelerated stability 0, 1, 2 and 3 months 24-month expiry period granted based on satisfactory accelerated data A minimum of one batch pilot-scale Additional stability studies (12 months at intermediate or long-term data through proposed expiry date) if significant change in 3-month accelerated data, expiry date will be determined based on the available data
FDA (contd)
For complex dosage forms Requires a modified ICH Q1A stability data package 3-month accelerated stability studies Long-term stability studies Expiry date will be determined on long-term stability data Minimum three batches according to ICH Q1A batch size Additional stability studies (12-month intermediate or long-term stability) through proposed expiration date (change in accelerated condition) Other supportive data Extension of expiration date is based on at least three production batches according to the approved protocol
Canadian Requirements for Generic Drugs The stability testing requirements for generic drugs are the same as for innovator products. All ICH guidelines are fully endorsed by Health Canada.
Recommendation
Considering the differences in the regulatory requirements, it is recommended to develop and design stability studies according to ICH, so as to meet all requirements.
In addition to the applicable Regulations and GMP documents, following are some of the Quality documents that should be consulted for Stability requirements: Health Canada (www.hc-sc.gc.ca/hpfb-dgpsa/tpddpt/index_drugs_information_e.html):
(stay tuned)
FDA (www.fda.gov/cder/guidance/index.htm):
Stability Testing of Drug Substances and Drug Products (draft, 1998) Drug Substance - CMC Information (draft, 2004) Drug Product - CMC Information (draft, 2003) SUPAC series (IR, MR, SS) (and Q&A Document) Changes to an Approved NDA/ANDA (04/2004) (and Q&A Document)
In addition to the applicable Regulations and GMP documents, the following are some of the Quality documents that should be consulted for Stability requirements: EU EMEA (www.emea.eu.int/Inspections/QWPhome.html):
Manufacture of the Finished Dosage Form Annex - Start of Shelf -Life of the Finished Dosage Form (05/2001) Maximum Shelf-Life for Sterile Products after First Opening or Following Reconstitution (01/1998) Stability Testing of Existing Active Substances and Related Finished Products (12/2003) Stability Testing Annex - Declaration of Storage Conditions for Medicinal Products Particulars and Active Substances (04/2003) Stability Testing Annex - In-Use Stability Testing of Human Medicinal Products (02/2001) Stability Testing for a Type II Variation to a Marketing Authorisation (04/1998) Stability Testing for Active Substances and Medicinal Products Manufactured in Climatic Zones III and IV to be Marketed in the EU (draft 02/2004) Stability Testing for Applications for Variations to a Marketing Authorisation (draft 04/2004)
Lots included in the study: 1 production batch and 2 of pilot scale manufactured according to the process described in the dossier Pilot scale batch for solid dosage forms is 10% of production scale or 100 000 whichever is greater Parameters susceptible to change over storage should be followed: Organoleptic properties Assay of each API: 10% of the label claim possible at the end of shelf-life Assay of degradation products Assay of antioxidants and chemical preservatives, check also for their efficacy Dissolution testing (limits should remain unchanged to release) Microbial contamination, sterility, bacterial endotoxins In-use stability data (if applicable)
Study should be performed in the claimed commercial packaging (container-closure) Storage conditions and frequency of testing according to ICH Q1A(R2) Minimum stability data to be submitted at time of submission: 12 months long term 30C/65% RH and 6 months accelerated 40C/75% RH with exception according to Supplement 2 to the Main Generic guide Unless otherwise justified, 30C / 65% RH is the recommended storage condition for Prequalification Definition of "significant change" is the same as ICH Q1A (R2) see later slide
Zone IVa: 30oC and 65% RH (hot & humid condition). Zone Ivb 300C and 75% RH (hot & very humid conditions). Store at temperature not 30oC in a dry place. Protect from light.