Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Bhilai Steel Plant - a symbol of Indo-Soviet techno-economic collaboration, is one of the first three integrated steel plants set up by Government of India to build up a sound base for the industrial growth of the country The agreement for setting up the plant with a capacity of 1 MT of Ingot steel was signed between the Government of erstwhile U.S.S.R. and India on 2nd February,1955
India entered the main stream of the steel producers with the commissioning of its first Blast Furnace on 4th February, 1959 by the then President of India, Dr Rajendra Prasad Commissioning of all the units of 1 MT stage was completed in 1961. A dream came true-the massive rocks from the virgin terrains of Rajhara were converted into valuable iron & steel.
BSP is the sole manufacturer of rails and producer of the widest and heaviest plates in India. Bhilai specializes in the high strength UTS 90 rails, high tensile and boiler quality plates, TMT bars, and electrode quality wire rods. It is a major exporter of steel products with over 70% of total exports from the Steel Authority of India Limited being from Bhilai. The distinction of being the first integrated steel plant with all major production units and marketable products covered under ISO 9002 Quality Certification belongs to BSP.
Not content with the Quality Assurance system for production processes, Bhilai has one in for ISO 14001 certification for its Environment Management System and its Dalli Mines Besides environment-friendly technology like Coal Dust Injection System in the Blast Furnaces, de-dusting units and electrostatic precipitators in other units, BSP has continued a vigorous forestation drive, planting trees each year averaging an impressive 1000 trees per day in the steel township and mines.
IRON ORE
Initial Reserve
Sl. No Name of Mine Reserve (M.T.) 1 2 3 4 5 6 7 8 Rajhara Mech. Kokan Rajhara-West Dalli Mech. Jharandalli Dalli Manual Mahamaya Dulki Total 102 20 6 108 31 29 21 10 327
Reserve as on 01.04.2007
Sl.No Name of Mine Reserve(M.T.) Fe% SiO2% Al2O3% 1Rajhara Mech. 2 Dalli Mech. 3Jharandalli 4 Dalli Manual 5 Mahamaya 6 Dulki Total 32.97 4 36.53 11.08 4.5 4.8 8.52 98.4 67.31 64.09 63.44 62.33 62 63.67 64.88 1.76 4.38 4.36 4.7 5 3.6 3.48 1.9 2.61 2.9 2.76 1.83 0.8
MINES MANAGEMENT
IRON ORE-FROM DALLI RAJARAHA RAJARAHA-10000TONNES/DAY TOTAL 24000TONNES/DAY DALLI-20000TONNES/DAY(12%LOSS) TRANSPORTED BY BOBS WAGON
41.84 30.93
Coke-Making Process
Coking is the process of heating coal in the absence of air in coke ovens to drive volatile matter from it. Ovens are heated by coke-oven gas/ blast furnace gas / mixed gas (i.e. CO & BF) which burns in heating flues in an oven's side walls (heating walls)
Waste gases from this combustion pass out through a stack or chimney. Once charged, coal is allowed to "coke" in the absence of air, for 18 to 22 hours depending on the battery at about 11801225 0c
Battery No of Ovens Coal holding Capacity/Oven Useful Vol /oven (CU.M) Sp Heat Consumption Kcal/kg 65
1-8
One tone of Dry coal yields 300-310 CU/M of gas 330 Kg Tar 0.28% Ammonia or 1.0-1.04% ammonium sulphate
COKE QUALITY
MOISTURE ASH V.M FC M40 M10 SULPHUR CSR CRI -40MM 3.6 16.8 .9 81.9 22.9
LIME STONE
FROM NANDANI MINES 6000T/DAY BY BOBS WAGON
Sinter Plant
Sintering Process
Agglomeration of Iron ore fines Fluxes & metallurgical waste Heating 1040-12000c
SINTER QUALITY
Fe FeO 54.26 8.12 SiO2 5.58 Al2O3 2.79 CaO 11.16 MgO 3.06 CaO-SiO2 5.58
Direct Reduction method includes both gas and coal based processes. The product coming out of these processes (Sponge Iron or Direct Reduced Iron) is in the solid state. Electric Arc Furnace follows DRI process for the production of crude steel. In Iron smelting process coal and iron ore fines are used as charge materials and liquid product will come out of the furnace, example Corex process. EAF or BOF route is followed for steel making.
For achieving high production rates with great degree of heat utilization Blast Furnace (BF) route is the most economical way till date. So Bhilai Steel Plant, which is an ore based Integrated Steel Plant had chosen Coke ovens Blast Furnace BOF/THF route for the production of crude steel.
In the blast furnace process iron ore and reducing agents (coke, coal) are transformed to hot metal, and slag is formed from the gangue of the ore burden and the ash of coke and coal. Hot metal and liquid slag do not mix and remain separate from each other with the slag floating on top of the denser iron. The iron can then be separated from the slag in the cast house. The other product from the Blast Furnace is dust laden blast furnace gas, which is further cleaned in the gas cleaning plant and is used as a fuel all over the plant.
A blast furnace has a typical conical shape. The sections from top down are:
Throat, where the burden surface is. The shaft or stack, where the ores are heated and reduction starts. The bosh parallel or belly and The bosh, where the reduction is completed and the ores are melted down. The hearth, where the molten material is collected and is cast via the tap hole.
Manganese Ore: Acts as additive for the supply of Mn in the Hot Metal Quartzite: Acts as an additive Coal Dust: Acts as an auxiliary fuel, reduces coke consumption in the BF Coal Tar: Acts as an auxiliary fuel, reduces coke consumption in the BF Pellets: Iron bearing materials. Although not in use right now, there is a proposal to utilize the fines below the sinter grade for pellet manufacturing and the pellets formed are going to be charged in the BF.
The raw materials from various places are transported to the bunkers placed near the furnaces and properly screened and weighed. These batched proportions of the raw materials are conveyed to the top of the blast furnace via skip car or conveyors and are charged in the blast furnace. The distribution is maintained in such a fashion that alternate layers of coke and iron-containing burden (sinter and iron ore) are formed inside the BF. The blast, which is heated in the stoves, is called Hot Blast and this is blown into the BF via tuyeres.
The hot blast gasifies the reductant components in the furnace, those being coke as well as auxiliary materials injected via the tuyeres. In this process, the oxygen in the blast is transformed into gaseous carbon monoxide. The resulting gas has a high flame temperature of between 2,100 and 2,300C.
Different Temperature in BF
Hot blast Temp Hot Metal Gas Temp Up take temp Periphery Temp Slag Temp Stove Dom temp Flue gas 950 9700c 1400-14250cTop 6000c 3500c 650 -8000c 1450 14800c 12000c 2700c
zone to the hearth, from which it is removed by casting through the tap hole. In the dripping zone the hot metal and slag consume coke, creating voidage. Additional coke is consumed for final reduction of iron oxide and carbon dissolves in the hot metal, which is called carburization. Thus the liquid products Hot Metal and Slag settle in the Hearth.
Tapping
Hot Metal and Slag are removed periodically from the blast furnace. The process is called Tapping the blast furnace. The other gaseous product, which is going to the top of the furnace, contains dust in it. It is cleaned in the Primary (dust catcher); Secondary (ventury and scrubber) and Tertiary (electro static precipitator) gas cleaning system and the cleaned gas is used as a fuel all over the plant.
It will take minimum 6-8 hours for the solid raw materials that are charged from the top to reach the bottom, whereas gaseous products that are sent through the tuyeres will go out in 2-8 seconds. The efficiency of the process is judged by two parameters
Productivity (Unit: tonnes/m3/day) Fuel Rate (Unit: kg/thm)
Decomposition of Hydrates Water - Gas Shift Reaction CO + H2O = CO2 + H2 Carbon Deposition Decomposition of Carbonates
Gas utilization
LOWER STACK ZONE Calcinations of Limestone Reduction of Various elements Reduction of unreduced Iron Reduction of Silicon Reduction of Mn, P, Zn etc. Formation / melting of slag, final reduction of FeO and melting of Fe.