Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Tools for turning Tools and handling and gripping Tools for hammering and driving Tools for cutting and forming Tools for drilling and reaming Tools for material for grinding Tools for pulling and pushing SST
Tools for turning Spanners(Wrenches): Types: 1) Open end Spanners 2) Combination Spanners 3) Ring Spanners 4) Socket Spanners 5) Flare nut Spanners 6) Special Spanners 7) Adjustable spanners
Speed Braces
Universal Joints
Extension Pieces
Ratchet handles
6) Special Spanners
Ring Spanner of C shape, S shape and L shape are used at places which are hard to reach with normal spanner
Spanners are marked with the size of the nut or head of the bolt on which they will be used The dimension across the nut or bolt head from one flat side to the other, referred to as across the flat Metric spanner are marked in millimeters. Typical Markings are 6mm,7mm, 8mm,10mm, 12mm, 14mm, 17mm, 19mm etc
Pipe Wrench
Turning and holding metal pipe.
13
Pliers
Pliers Circlip Plier Multi grip pliers Vice grip plier Tongs
16
Pliers
17
Pliers
18
Pliers
19
Pliers
20
Pliers
21
Bench vice
Bench vice are used to support parts while they are being dismantled or reassemble. Vice are used to hold material while it is being sawn, filed, drilled, chiseled or worked in some other way.
22
Hammers
Ballpein hammer Crosspein hammer Panel Hammer Sledge hammer Soft Head Hammer
23
Hammers
Ballpein hammer: This is the most commonly used in workshop. The flat face of the hammer is used for striking punches and chisel and also for general work.
24
Hammers
Crosspein hammer It is useful for work in corners that would not be accessible with a ballpein
25
Hammers
Panel hammer: This is a special shaped hammer that is used with a dolly for beating out damaged body panels.
26
Hammers
Sledge hammer: This is a special shaped hammer that is used with a dolly for beating out damaged body panels.
27
Hammers
Softhead hammer: This is used for striking surface that can easily be marked or damaged. The faces or heads of soft hammers can be of rubber, lead, brass or copper.
28
Punches
Center punches
29
Hacksaws
30
Chisel
31
Files
32
Twist Drills
33
Taps
34
Dies
35
Grinding wheel
36
Pullers
37
Presses
38