Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
R E CISI
MATERIAL: Body: EN1677 Grade 8, surface pink powder coated INFLUENCE OF TEMPERATURE When using the VLBG in over heated areas, the WLL has to be reduced as follows, based upon the strength of the bolts: 100 up 200 - 15% - (212F to 392F) 200 up 250 - 20% - (392F to 482F) 250 up 350 - 25% - (482F to 662F) Temperatures exceeding 350C (662F) are not recommended
B C
Standard Type
F R E T G L H J K D A SW N
DB
WLL = Working Load Limit Each lifting product is rated with a working load limit with a safety factor of 4 from the worst angle of lift. This means the product will break at more than 4 times the WLL (for multi leg lifts please consult sales).
Part Number Ringbolt Ringbolt WLL Standard Long (t) 0.30 VLBG-M8 VLBG-M8/LONG 0.63 VLBG-M10 VLBG-M10/LONG 1.00 VLBG-M12 VLBG-M12/LONG 1.50 VLBG-M16 VLBG-M16/LONG 2.50 VLBG-M20 VLBG-M20/LONG 4.00 VLBG-M24 VLBG-M24/LONG 4.00 VLBG-M27 5.00 VLBG-M30 VLBG-M30/LONG 7.00 VLBG-7T-M36* 8.00 VLBG-8T-M36 VLBG-8T-M36/LONG VLBG-10T-M42 VLBG-10T-M42/LONG 10.00 VLBG-15T-M42 VLBG-15T-M42/LONG 15.00 20.00 VLBG-M48 VLBG-M48/LONG
* Special design, bolt cannot be removed. FEATURES AND RECOMMENDATIONS Will turn 360 Adjustable in pull direction Load ring foldable Full WLL in any load direction Surface pink powder coated Only use bolts recommended by manufacturer 100% crack detected Outer and inner hexhead bolt for universal tool use Surface protection: CORRUD-DT-min. 20 x better corrosion protection than zinc plated (except spot face after cutting to a special length). Thread over whole bolting length H
COUPLINGS
Lifting & Lashing Points For Bolting
P
R E CISI
Standard Length
Long Length
L max. H max.
90
90
FEATURES AND RECOMMENDATIONS (CONT.) Bolt is held captive in body and should only be Load ring has to be adjusted in pull direction, free replaced with the same quality class bolt to move and must not support on edges Clear identification at the bolt head with thread size The lifting attachment must be free to move when and quality class attached to the load ring Provide plain bolting surface. The bolted ring must Regular inspections should always be carried out be free to turn 360 by qualified personnel
sales@rino.co.uk
www.rino.co.uk
COUPLINGS
Lifting & Lashing Points For Bolting
R E CISI
Forged, 1.6541, alloy quenched and tempered, 100% electro-magnetic crack detection acc. to EN 1677-1. Grade 10.9
K D B F F N A C
L M E S
WLL = Working Load Limit Each lifting product is rated with a working load limit with a safety factor of 4 from the worst angle of lift. This means the product will break at more than 4 times the WLL (for multi leg lifts please consult sales). All dimensions are in mm
Part Number VRSF-M8 VRSF-M10 VRSF-M12 VRSF-M16 VRSF-M20 VRSF-M24 VRSF-M30 VRSF-M36 VRSF-M42 VRSF-M48 WLL Weight (t) kg A 34 0.40 0.1 34 0.40 0.1 42 0.75 0.2 49 1.50 0.3 57 2.30 0.5 69 3.20 0.9 86 4.50 1.7 7.00 2.9 103 9.00 4.6 120 12.00 7.0 137 B 11 11 13 15 17 21 26 32 38 43 C 8.5 8.5 10.0 14.0 16.0 19.0 24.0 29.0 34.0 38.0 D 25 25 30 35 40 48 60 72 82 94 E 25 25 30 35 40 48 60 75 85 100 G 28 28 34 40 50 60 75 90 105 120 K 47 47 56 65 75 90 112 135 158 180 L 12 15 18 24 30 36 45 54 63 72 M 8 10 12 16 20 24 30 36 42 48 N 6 6 8 10 12 14 17 22 24 27 S 16.0 15.0 18.0 22.0 27.5 33.0 41.5 49.5 58.0 66.0 Price 1 off 22.15 23.81 29.90 35.25 50.07 64.19 91.15 135.24 189.24 222.04
FEATURES AND RECOMMENDATIONS Design factor 4:1 in any direction Workpiece material must conform to minimum quality std. St 37 Countersink of tapped hole = nominal thread diameter
Provide plain seat of the special hexagon bolt VRSF must be able to rotate by 360 in bolted condition Specifically engineered Grade 10.9 captive hexagon socket screw
COUPLINGS
Lifting & Lashing Points For Bolting
P
R E CISI
Starpoint VRSF-M20
6000kg 90 2300kg 2300kg
M20
M20
Important Lateral forces with standard eye bolts acc. to DIN580 are forbidden. In case of multiple leg suspensions 2leg and 34-leg the ring plane of the eye bolt eyes must be the direction of pull. This cannot be guaranteed when standard eye bolts are tightened. This is only possible with the Starpoint eye bolt, because it can be adjusted in pull direction in the tightened position. Fitting and Adjusting the VRSF Starpoint:
VRSF Adjustable
Star shaped clear distinction from standard eye bolt DIN 580 Fluorescent pink powder coating Clear indication of WLL (in metric tons and lbs) for side load direction F (not allowed with standard eye bolt).
Type VRSF includes the locking device/Star key. The Starpoint is delivered with an intergrated installation tool. The tool should be engaged into the hexagon socket screw and tightened by the hand-disengage tool. The Starpoint is then adjustable 360.
sales@rino.co.uk
www.rino.co.uk
COUPLINGS
Lifting & Lashing Points For Bolting
R E CISI
MATERIAL: Body:
EN1677 Grade 8
WLL = Working Load Limit Each lifting product is rated with a working load limit with a safety factor of 4 from the worst angle of lift. This means the product will break at more than 4 times the WLL (for multi leg lifts please consult sales).
A
B E
G F M D SW
are available upon request. Thickened tip of the hook prevents handling, malpractices, and resists bending Wearing edges on both sides and gauges for checking hook openings Will turn 360 180 pivoting Available to purchase as separate components. See "Separate components" page for further details
FEATURES AND RECOMMENDATIONS All parts are either 100% crack detected or proof loaded according to EN 1677 All original bolts are 100% crack detected Design factor 4:1 in any direction With double ball bearings, for tilting, twisting and turning without jerks Suitable for all sling systems, either hook, eye or loop Non-protruding hook tip Forged safety latch, engages in the tip of the hook therefore protected against lateral bending Coiled double leg corrosion protected spring
COUPLINGS
Lifting & Lashing Points For Bolting
P
R E CISI
MATERIAL: Body:
WLL = Working Load Limit Each lifting product is rated with a working load limit with a safety factor of 4 from the worst angle of lift. This means the product will break at more than 4 times the WLL (for multi leg lifts please consult sales).
C A
B E G F M D SW
FEATURES AND RECOMMENDATIONS All parts are either 100% crack detected or proof loaded according to EN 1677 All original bolts are 100% crack detected Design factor 4:1 in any direction Ring connection for hook assemblies With double ball bearings, for tilting, twisting and turning without jerks Suitable for all sling systems; hook, eye or loop Will turn 360 180 pivoting Available to purchase as separate components. See "Separate components" page for further details
sales@rino.co.uk
www.rino.co.uk
COUPLINGS
Lifting & Lashing Points For Welding
MATERIAL: Body:
R E CISI
WLL = Working Load Limit Each lifting product is rated with a working load limit with a safety factor of 4 from the worst angle of lift. This means the product will break at more than 4 times the WLL (for multi leg lifts please consult sales).
A
B E
G D
FEATURES AND RECOMMENDATIONS Features double ball bearing 360 swivelling WPP-S range is the universal connection for round slings, wire ropes, hook and ring assemblies Available to purchase as separate components. See "Separate components" page for further details
COUPLINGS
P
R E CISI
WLL = Working Load Limit Each lifting product is rated with a working load limit with a safety factor of 4 from the worst angle of lift. This means the product will break at more than 4 times the WLL (for multi leg lifts please consult sales).
C
B E G
FEATURES AND RECOMMENDATIONS Features double ball bearing 360 swivelling WPP-B range is the ring connection for hook assemblies Available to purchase as separate components. See "Separate components" page for further details
sales@rino.co.uk
www.rino.co.uk
COUPLINGS
Lifting & Lashing Points For Welding
R E CISI
Forged, 1.0570 (St52-3) to DIN 18800 Forged, acc. to EN1677, grade 8 Red in colour WLL = Working Load Limit Each lifting product is rated with a working load limit with a safety factor of 4 from the worst angle of lift. This means the product will break at more than 4 times the WLL (for multi leg lifts please consult sales).
Locking Spring
180 Pivoting
E C D F T
Weld Arrangement:
D G B A H HV
Distance Lugs
Note: All lifting points can also be used as lashing points. The permissible pull force is double the nominal WLL. Design factor for load securing is 2:1. Eg. = LBS-1T lifting of 1t WLL, as lashing point 2000 daN permitted. Pull force, LC = lashing capacity. All dimensions are in mm
Part WLL Number (t) LBS-1T 1 LBS-3T 3 LBS-5T 5 LBS-8T 8 LBS-10T 10 LBS-15T* 15 A 32 42 61 75 70 96 B 65 85 110 118 146 180 C 36 50 65 65 80 100 D 25 31 44 55 51 69 E 39 50 72 66 90 100 F 13.50 16.50 22.50 26.50 30x20 33x22 G 33 46 60 60 70 90 H 85 108 155 168 190 230 Weld HV+ HV5+3 HV8+3 HV12+4 HV16+4 HV17+4 HV25+6 Weight kg 0.3 0.6 1.6 2.5 3.2 6.0 Price 1 off 18.77 21.29 45.57 74.45 83.41 117.41
FEATURES AND RECOMMENDATIONS Easy and quick to weld assembly Compact design High dynamic and static strength Forged suspension ring acc. to EN 1677, grade 8, electromagnetic crack detected, painted red; meets the requirements of the appropriate safety authorities The welding block has been forged of material 1.0570 (St 52-3) and clearly stamped with the permissible WLL. The patented distance lugs assist in achieving the correct root weld
Important: The special weld design (continuous HV), the requirements of DIN 18800 are fulfilled, eg: a closed weld avoids corrosion and thus suitable for outdoor use Distinctive features for type LBS: A protected spring keeps the load ring in every required position. The parts are connected in such a way that they remain captive. *Only LBS-15T does not have this The spring prevents unwanted noise occurring as a result of vibration
COUPLINGS
Lifting & Lashing Points
N
P
R E CISI
Separate Components
Welding PowerPoint WPP Swivel - WPP-S/SEP
Part Number WPP-S-0.63T/SEP WPP-S-1.5T/SEP WPP-S-2.5T/SEP WPP-S-4.0T/SEP WPP-S-5.0T/SEP WPP-S-8.0T/SEP Price 1 off POA POA POA POA POA POA
PowerPoint B-Link - B
Part Number B-0.63T B-1.5T B-2.5T B-4.0T B-5.0T B-8.0T Price 1 off POA POA POA POA POA POA
sales@rino.co.uk
www.rino.co.uk