Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
UNS Number N06625 Other common names: Alloy 625 Inconel 625 is a corrosion and oxidation resistant nickel alloy that is used both for its high strength and outstanding aqueous corrosion resistance. Its outstanding strength and toughness is due to the addition of niobium which acts with the molybdenum to stiffen the alloys matrix. Alloy 625 has excellent fatigue strength and stress-corrosion cracking resistance to chloride ions. This nickel alloy has excellent weldability and is frequently used to weld AL-6XN. This alloy resists a wide range of severely corrosive environments and is especially resistant to pitting and crevice corrosion. Some typical applications Inconel 625 is used in are chemical processing, aerospace and marine engineering, pollution-control equipment, and nuclear reactors. In what form is Inconel 625 available at Mega Mex?
Sheet Plate Bar Pipe & Tube (welded & seamless) Wire
High creep-rupture strength Oxidation resistant to 1800 F Seawater pitting and crevice corrosion resistant Immune to chloride ion stress corrosion cracking Non-magnetic Chemical Composition, %
Al .40 max
Ti .40 max
C .10 max
Aircraft ducting systems Aerospace Jet engine exhaust systems Engine thrust-reverser systems Specialized seawater equipment Chemical process equipment
Fabrication with Inconel 625 Alloy 625 has excellent forming and welding characteristics. It may be forged or hot worked providing temperature is maintained in the range of about 1800-2150 F. Ideally, to control grain size, finish hot working operations should be performed at the lower end of the temperature range. Because of its good ductility, alloy 625 is also readily formed by cold working. However, the alloy does work-harden rapidly so intermediate annealing treatments may be needed for complex component forming operations. In order to restore the best balance of properties, all hot or cold worked parts should be annealed and rapidly cooled.
This nickel alloy can be welded by both manual and automatic welding methods, including gas tungsten arc, gas metal arc, electron beam and resistance welding. It exhibits good restraint welding characteristics. For more information on fabrication and machining, click here. ASTM Specifications
Sheet/Plate B443
Bar B446
Forging -
Fitting -
Wire -
Tensile (psi) 144,000 134,000 132,000 131,500 130,000 119,000 78,000 40,000
.2% Yield (psi) 84,000 66,000 63,000 61,000 60,500 60,000 58,500 39,000