Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
AU9540
USB Smart Card Reader Controller
1.
2.
Features
Microsoft WHQL Smartcard Reader Subcategory Certified Qualification level Microsoft Windows XP family, x86 Microsoft Windows XP family, x64 Microsoft Windows Vista family, x86 Microsoft Windows Vista family, x64 Microsoft Windows 7, x86 Microsoft Windows 7, x64 Support selective suspend feature in the system later than or equal to Windows XP Support power management tab in device manager It supports 9 local languages. Default is key2=409 =>English(United States) key0=804 =>Chinese(Simplified) key1=404 =>Chinese(Traditional) key2=409 =>English(United States) key3=40c =>French(France) key4=407 =>German key5=410 =>Italian key6=411 =>Japanese key7=412 =>Korean key8=40a =>Spanish
3.
Configuration
uSsEnable = 1 (default) 1 Enable the selective suspend feature 0 Disable the selective suspend feature When this value is set with 1, its recommended to set uWwEnable to 1 as well to avoid some unreasonable user experience. uWwEnable = 1 (default) 1 Enable the remote wakeup feature 0 Disable the remote wakeup feature uCardOutResume=1 (default) The card insertion event is designed to trigger remote wakeup absolutely. But card removal event is optionally to trigger remote wakeup. This value is only valid when uWwEnable is enabled. 1 Card removal event triggers remote wakeup. 0 Card removal event doesnt trigger remote wakeup. uSsMs = 30000 (default) The idle time detected by the driver to judge to enter selective suspend state. The unit is milli-second. uDevNameSel = 0 (default) This value could change the vendor name and product name for the smartcard service. 0 The vendor name and product name are specified inside the driver. 1 The vendor name and product name are read from USB VID string descriptor and PID string descriptor. 2 The vendor name and product name are determined by sVendorName and sProductName as below setting. sVendorName= This value is used to set the vendor name when uDevNameSel is 2.
Page 2 of 4
sProductName= This value is used to set the product name when uDevNameSel is 2. uDataRateSel=0 (default) This value determines the source of data rate list used in the driver. 0 Inside the driver. 1 From the device. uPowerPage=1 (default) 0 Dont show power management tab in device manager. 1 Show power management tab in device manager.
4.
To do silent install, please input as: setup.exe s f2<Path\LogFile>. To do silent uninstall, please input as: setup.exe s f1<Path\unsetup.iss> -f2<Path\LogFile>
5.
Test Plan
Before the driver is released, following test items will be performed to ensure the functionality and quality with different scenarios and applications. Power saving mode device behavior test WHQL verification test Software applications test PC system compatibility test Error recovery test Functional test Device Plug/Unplug Suspend/Resume Cool/Warm boot Smart card Read/Write Selective suspend Durability test
Page 3 of 4