Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
S400 / S1400
Full Port Stainless Steel Single Chamber Basic Valve with Mechanical Check Feature
The Watts ACV Models S400 and S1400 are full port, single chamber basic valves that incorporate a two-piece telescoping disc and diaphragm assembly. This assembly is the only moving part within the valve allowing it to open, close, or modulate as commanded by the pilot control system. The lower portion of this two-piece assembly is a mechanical check feature, which acts independent of diaphragm position or pilot control system, and provides immediate check action when flow ceases. The Stainless Steel design offers superior corrosion resistance, as well as a lightweight alternative to conventional heavy iron valves. Stainless Steel construction reduces corrosion, reducing diaphragm wear and the frequency and labor costs associated with traditional maintenance repairs. Model S400: Globe Pattern Single Chamber Basic Valve with Mechanical Check Feature Model S1400: Angle Pattern Single Chamber Basic Valve with Mechanical Check Feature
S400 (Globe)
I C H
S1400 (Angle)
F G
A B
D E
Dimensions
Valve Size Globe 150# A in. 4 6 8 10 12 16 mm 100 150 200 250 300 400 in. 15 20 2538 2934 34 4138 mm 381 508 645 756 864 1051 in. 1558 21 2638 3118 3512 4312 Globe 300# B mm 397 533 670 791 902 1105 in. 1058 1338 16 1718 2078 25 Cover To Center C mm 270 340 406 435 530 635 in. 712 10 1234 1478 17 201316 Angle 150# D mm 191 254 324 378 432 529 in. 778 1012 1314 15916 1734 2158 Angle 300# E mm 200 267 337 395 451 549 in. 5 6 8 858 1334 151116 Angle 150# F mm 127 152 203 219 349 398 in. 5516 612 812 9516 1412 1612 Angle 300# G mm 135 165 216 237 368 419 in.
12 12
Port Size H mm 13 13 25 25 25 25
Shipping Weights* lbs. 77 168 225 376 450 kgs. 35 76 102 171 204
mm 19 19 25 32 32 38
1 1 1 1
Standard Materials
Body, Cover & Flanges: Trim: 304L Stainless Steel (standard) 316L Stainless Steel (optional) 316 Stainless Steel
Operating Pressure
150 Flanged = 250psi (17.2 bar)
Operating Temperature
Buna-N: 160F (71C) Maximum EPDM: 300F (140F) Maximum Viton: 250F (121C) Maximum
Elastomers: Buna-N (standard) EPDM Viton Stem, Nut & Spring: Stainless Steel
Viton is a registered trademark of DuPont Dow Elastomers. Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
S400 / S1400 Full Port Stainless Steel Single Chamber Basic Valve with Mechanical Check Feature
Flow Data - ACV S400 (Globe) / S1400 (Angle)
Valve Size - Inches
Maximum Continuous Flow Rate Gpm (Water) Maximum Intermittent Flow Rate Gpm (Water) CV Factor GPM (Globe) CV Factor GPM (Angle)
4
800 1000 210 250
6
1850 2300 460 561
8
3100 4000 790 990
10
5000 6250 1260 1590
12
7000 8900 1725 2500
16
11100 14100 2940 4200
Estimated
Maximum continuous flow based on velocity of 20 ft. per second. Maximum intermittent flow based on velocity of 25 ft. per second. The Cv Factor of a value is the flow rate in US GPM at 60F that will cause a 1psi drop in pressure. The factors stated are based upon a fully open valve. Cv factor can be used in the following equations to determine Flow (Q) and Pressure Drop (P): Q (Flow) = CvP P (Pressure Drop) = (Q/Cv)2
Headloss
100 80 60
Angle
12 10 16 12 10 16 4 6
5000
40 30 20
10 8 6 4 3 2
8 10
20
40
60 80 100
200
500
1000
2000
8
10000
Globe
20000
4
22
6
70
8
1-1/4
10
2-1/2
12
4
16
9-1/2
Valve Travel
Valve Size - Inches
Travel - Inches
4
1
6
1-1/2
8
2
10
2-1/2
12
3
16
4
ES-ACV-S400-S1400 1219
2012 Watts