Sei sulla pagina 1di 46

TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS

SLOS192C FEBRUARY 1997 REVISED APRIL 2010

D Outstanding Combination of dc Precision

D D D

description
The TLE20x7 and TLE20x7A contain innovative circuit design expertise and high-quality process control techniques to produce a level of ac performance and dc precision previously unavailable in single operational amplifiers. Manufactured using Texas Instruments state-of-the-art Excalibur process, these devices allow upgrades to systems that use lower-precision devices. In the area of dc precision, the TLE20x7 and TLE20x7A offer maximum offset voltages of 100 V and 25 V, respectively, common-mode rejection ratio of 131 dB (typ), supply voltage rejection ratio of 144 dB (typ), and dc gain of 45 V/V (typ).
AVAILABLE OPTIONS PACKAGED DEVICES TA VIOmax AT 25C 25 V 100 V 25 V 100 V 25 V 100 V SMALL OUTLINE (D) TLE2027ACD TLE2037ACD TLE2027CD TLE2037CD TLE2027AID TLE2037AID TLE2027ID TLE2037ID TLE2027AMD TLE2037AMD TLE2027MD TLE2037MD CHIP CARRIER (FK) TLE2027AMFK TLE2037AMFK TLE2027MFK TLE2037MFK CERAMIC DIP (JG)

NC OFFSET N1 NC OFFSET N2 NC NC IN NC IN + NC
4 5 6 7 8 3 2 1 20 19 18 17 16 15 14 9 10 11 12 13

and AC Performance: Unity-Gain Bandwidth . . . 15 MHz Typ Vn . . . . . 3.3 nV/Hz at f = 10 Hz Typ, 2.5 nV/Hz at f = 1 kHz Typ VIO . . . . 25 V Max AVD . . . . 45 V/V Typ With RL = 2 k, 19 V/V Typ With RL = 600 Available in Standard-Pinout Small-Outline Package Output Features Saturation Recovery Circuitry Macromodels and Statistical information

D, JG, OR P PACKAGE (TOP VIEW)

OFFSET N1 IN IN + VCC

1 2 3 4

8 7 6 5

OFFSET N2 VCC + OUT NC

FK PACKAGE (TOP VIEW)

NC VCC + NC OUT NC

NC VCC NC NC NC

PLASTIC DIP (P) TLE2027ACP TLE2037ACP TLE2027CP TLE2037CP TLE2027AIP TLE2037AIP TLE2027IP TLE2037IP TLE2027AMP TLE2037AMP TLE2027MP TLE2037MP

CHIP FORM (Y) TLE2027Y TLE2037Y TLE2027Y TLE2037Y

0C to 70C

40C to 105C 40

55 55C to 125C

TLE2027AMJG TLE2037AMJG TLE2027MJG TLE2037MJG

The D packages are available taped and reeled. Add R suffix to device type (e.g., TLE2027ACDR). Chip forms are tested at 25C only. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

All trademarks are the property of their respective owners.


PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

Copyright 20022006, Texas Instruments Incorporated www.ti.com

SLOS192C FEBRUARY 1997 REVISED APRIL 2010

TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS
description (continued)
The ac performance of the TLE2027 and TLE2037 is highlighted by a typical unity-gain bandwidth specification of 15 MHz, 55 of phase margin, and noise voltage specifications of 3.3 nV/Hz and 2.5 nV/Hz at frequencies of 10 Hz and 1 kHz respectively. The TLE2037 and TLE2037A have been decompensated for faster slew rate (7.5 V/s, typical) and wider bandwidth (50 MHz). To ensure stability, the TLE2037 and TLE2037A should be operated with a closed-loop gain of 5 or greater. Both the TLE20x7 and TLE20x7A are available in a wide variety of packages, including the industry-standard 8-pin small-outline version for high-density system applications. The C-suffix devices are characterized for operation from 0C to 70C. The I-suffix devices are characterized for operation from 40C to 105C. The M-suffix devices are characterized for operation over the full military temperature range of 55C to 125C.

symbol
OFFSET N1

IN +

+ OUT

IN OFFSET N2

POST OFFICE BOX 655303 DALLAS, TEXAS 75265 POST OFFICE BOX 1443 HOUSTON, TEXAS 772511443

TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS
SLOS192C FEBRUARY 1997 REVISED APRIL 2010

TLE202xY chip information


This chip, when properly assembled, displays characteristics similar to the TLE202xC. Thermal compression or ultrasonic bonding may be used on the doped-aluminum bonding pads. The chip may be mounted with conductive epoxy or a gold-silicon preform.
BONDING PAD ASSIGNMENTS (6) (4) OFFSET N1 IN + IN OFFSET N2 (1) (3) (2) (8) + VCC+ (7) (6) (4) VCC OUT

(8)

(7)

(6)

(5)
90 (7) (3)

(4)

(2)

CHIP THICKNESS: 15 MILS TYPICAL BONDING PADS: 4 4 MILS MINIMUM TJmax = 150C TOLERANCES ARE 10%.

(1)
(8)

(2)

(3)
(1) 73

ALL DIMENSIONS ARE IN MILS. PIN (4) IS INTERNALLY CONNECTED


TO BACKSIDE OF CHIP.

TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW NOISE HIGH SPEED PRECISION OPERATIONAL AMPLIFIERS SLOS192C FEBRUARY 1997 REVISED APRIL 2010

4 V CC+ R9 R15 Q42 C1 Q36 Q13 Q30 R21 R8 Q12 Q17 Q25 Q28 C3 C2 Q18 Q20 Q21 Q15 Q26 Q22 Q16 R3 R6 R7 R10 R12 R14 R18 Q31 Q35 R19 Q29 Q40 Q45 Q33 Q51 R23 R24 R26 Q23 Q24 Q34 Q41 C4 R13 Q37 Q44 R22 Q43 Q47 Q52 Q48 Q50 Q53 Q54 Q60 Q62 Q19 R17 Q32 Q39 R11 R16 Q38 Q57 OUT Q56 Q59 Q11 Q14 Q46 Q27 Q49 R25 R20 Q58 Q55 Q61 R4 R5 R1 Q10 R2 VCC ACTUAL DEVICE COMPONENT COUNT COMPONENT Transistors Resistors epiFET Capacitors TLE2027 61 26 1 4 TLE2037 61 26 1 4

equivalent schematic

OFFSET N2

OFFSET N1

Q5

Q2

Q9

Q6

Q3

IN +

Q1

Q4

Q7

Q8

IN

www.ti.com

TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS
SLOS192C FEBRUARY 1997 REVISED APRIL 2010

absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage, VCC+ (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 V Supply voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 V Differential input voltage, VID (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2 V Input voltage range, VI (any input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VCC Input current, II (each Input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 mA Output current, IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mA Total current into VCC+ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mA Total current out of VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mA Duration of short-circuit current at (or below) 25C (see Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . unlimited Continuous total power dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table Operating free-air temperature range, TA: C suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0C to 70C I suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40C to 105C M suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55C to 125C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65C to 150C Case temperature for 60 seconds, TC: FK package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260C Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: D or P package . . . . . . . . . . . . . . . . 260C Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds: JG package . . . . . . . . . . . . . . . . . . . 300C

Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. All voltage values, except differential voltages, are with respect to the midpoint between VCC + and VCC . 2. Differential voltages are at IN+ with respect to IN . Excessive current flows if a differential input voltage in excess of approximately 1.2 V is applied between the inputs unless some limiting resistance is used. 3. The output may be shorted to either supply. Temperature and/or supply voltages must be limited to ensure that the maximum dissipation rating is not exceeded. DISSIPATION RATING TABLE PACKAGE D FK JG P TA 25C POWER RATING 725 mW 1375 mW 1050 mW 1000 mW DERATING FACTOR ABOVE TA = 25C 5.8 mW/C 11.0 mW/C 8.4 mW/C 8.0 mW/C TA = 70C POWER RATING 464 mW 880 mW 672 mW 640 mW TA = 105C POWER RATING 261 mW 495 mW 378 mW 360 mW TA = 125C POWER RATING 145 mW 275 mW 210 mW 200 mW

recommended operating conditions


C SUFFIX MIN Supply voltage, VCC Common mode input voltage, VIC voltage Common-mode Operating free-air temperature, TA

I SUFFIX MIN 4 11 10.4 40 MAX 19 11 10.4 105

M SUFFIX MIN 4 11 10.2 55 MAX 19 11 10.2 125

MAX 19 11 10.5 70

UNIT V V C

4 TA = 25C TA = Full range 11 10.5 0

Full range is 0C to 70C for C-suffix devices, 40C to 105C for I-suffix devices, and 55C to 125C for M-suffix devices.

www.ti.com

SLOS192C FEBRUARY 1997 REVISED APRIL 2010

TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS
TLE20x7C electrical characteristics at specified free-air temperature, VCC = 15 V (unless otherwise noted)
PARAMETER VIO Input offset voltage Temperature coefficient of input offset voltage Input offset voltage long-term drift (see Note 4) IIO IIB Input offset current Input bias current VIC = 0, RS = 50 TEST CONDITIONS TA 25C Full range Full range 25C 25C Full range 25C Full range 25C VICR Common mode Common-mode input voltage range RS = 50 Full range 25C Full range 25C Full range 25C Full range 25C Full range RL = 2 k RL = 2 k RL = 1 k 25C Full range 25C Full range 25C Full range 25C IO = 0 VIC = VICRmin, RS = 50 VCC = 4 V to 18 V, RS = 50 VCC = 4 V to 18 V, RS = 50 VO = 0, 0 No load 25C 25C Full range 25C Full range 25C Full range 100 98 94 92 3.8 5.3 5.6 144 11 to 11 10.5 to 10.5 10.5 10 12 11 10.5 10 12 11 5 2 3.5 1 2 0.5 8 50 131 117 114 110 106 3.8 5.3 5.6 mA 144 dB 19 38 45 13.5 13 13.2 12.9 13 to 13 15 0.4 0.006 6 TLE20x7C MIN TYP 20 MAX 100 145 1 1 90 150 90 150 11 to 11 10.5 to 10.5 10.5 10 12 11 10.5 10 12 11 10 4 8 2.5 5 2 8 50 131 pF

TLE20x7AC MIN TYP 10 MAX 25 70 0.2 0.006 6 15 13 to 13 1 1 90 150 90 150

UNIT V V V/C V/mo nA nA

VIO

VOM +

Maximum positive peak p g g output voltage swing

RL = 600 RL = 2 k RL = 600 RL = 2 k VO = 11 V, VO = 10 V,

12.9 13.2 13 13.5 45 38 19 V V

VOM

Maximum negative peak output voltage swing

AVD

Large-signal differential Large signal voltage amplification

VO = 10 V V, VO = 10 V, RL = 600

V/ V V/V

Ci zo CMRR

Input capacitance Open-loop output impedance Common mode Common-mode rejection ratio Supply voltage Supply-voltage rejection ratio (VCC /VIO)

dB

kSVR

ICC

Supply current

Full range is 0C to 70C. NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150C extrapolated to TA = 25C using the Arrhenius equation and assuming an activation energy of 0.96 eV.

www.ti.com

TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS
SLOS192C FEBRUARY 1997 REVISED APRIL 2010

TLE20x7C operating characteristics at specified free-air temperature, VCC = 15 V, TA = 25C (unless otherwise specified)
PARAMETER TEST CONDITIONS RL = 2 k, CL = 100 pF pF, See Figure 1 SR Slew rate at unity gain RL = 2 k, CL = 100 pF, TA = 0C to 70C, See Figure 1 RS = 20 , RS = 20 , f = 0.1 Hz to 10 Hz f = 10 Hz f = 1 kHz VO = + 10 V, AVD = 1, See Note 5 VO = + 10 V, AVD = 5, See Note 5 RL = 2 k, CL = 100 pF RL = 2 k, CL = 100 pF RL = 2 k RL = 2 k, CL = 100 pF TLE2027 TLE2027 TLE2037 TLE2027 TLE2037 f = 10 Hz f = 1 kHz TLE20x7C MIN 1.7 6 1.2 5 3.3 2.5 50 10 0.8 < 0.002% 8 4.5 250 25 1.8 TYP 2.8 7.5 MAX MIN 1.7 6 1.2 5 3.3 2.5 50 10 0.8 < 0.002% 4.5 3.8 130 25 1.8 nV/Hz nV pA/Hz TLE20x7AC TYP 2.8 7.5 V/s MAX UNIT

Vn VN(PP) In

Equivalent input noise voltvolt age (see Figure 2) Peak-to-peak equivalent input noise voltage Equivalent input noise curcur rent

THD

Total harmonic distortion

TLE2037 TLE2027 TLE2037 TLE2027 TLE2037 TLE2027 TLE2037 9(6) 35

< 0.002% 13 50 30 80 55 50 9(6) 35

< 0.002% 13 MHz 50 30 80 55 50 kHz

B1 GBW BOM

Unity-gain bandwidth (see Figure 3) Gain bandwidth product Maximum output-swing output swing bandwidth Phase margin at unity gain (see Figure 3)

NOTE 5: Measured distortion of the source used in the analysis was 0.002%. NOTE 6: This parameter is not production tested

www.ti.com

SLOS192C FEBRUARY 1997 REVISED APRIL 2010

TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS
TLE20x7I electrical characteristics at specified free-air temperature, VCC = 15 V (unless otherwise noted)
PARAMETER VIO Input offset voltage Temperature coefficient of input offset voltage Input offset voltage long-term drift (see Note 4) IIO IIB Input offset current Input bias current VIC = 0, RS = 50 TEST CONDITIONS TA 25C Full range Full range 25C 25C Full range 25C Full range 25C VICR Common mode Common-mode input voltage range RS = 50 Full range 25C Full range 25C Full range 25C Full range 25C Full range 25C Full range 25C Full range 25C Full range 25C IO = 0 VIC = VICRmin, RS = 50 VCC = 4 V to 18 V, RS = 50 VCC = 4 V to 18 V, RS = 50 VO = 0, 0 No load 25C 25C Full range 25C Full range 25C Full range 100 96 94 90 3.8 5.3 5.6 144 11 to 11 10.4 to 10.4 10.5 10 12 11 10.5 10 12 11 5 2 3.5 1 2 0.5 8 50 131 117 113 110 105 3.8 5.3 5.6 mA 144 dB 19 38 45 13.5 13 13.2 12.9 13 to 13 15 0.4 0.006 6 TLE20x7I MIN TYP 20 MAX 100 180 1 1 90 150 90 150 11 to 11 10.4 to 10.4 10.5 10 12 11 10.5 10 12 11 10 3.5 8 2.2 5 1.1 8 50 131 pF

TLE20x7AI MIN TYP 10 MAX 25 105 0.2 0.006 6 15 13 to 13 1 1 90 150 90 150

UNIT V V V/C V/mo nA nA

VIO

VOM +

Maximum positive peak p g g output voltage swing

RL = 600 RL = 2 k RL = 600 RL = 2 k VO = 11 V, RL = 2 k VO = 10 V, RL = 2 k

12.9 13.2 13 13.5 45 38 19 V V

VOM

Maximum negative peak output voltage swing

AVD

Large-signal differential Large signal voltage amplification

VO = 10 V RL = 1 k V, VO = 10 V RL = 600 V,

V/ V V/V

Ci zo CMRR

Input capacitance Open-loop output impedance Common mode Common-mode rejection ratio Supply voltage Supply-voltage rejection ratio (VCC /VIO) Supply current

dB

kSVR

ICC

Full range is 40C to 105C. NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150C extrapolated to TA = 25C using the Arrhenius equation and assuming an activation energy of 0.96 eV.

www.ti.com

TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS
SLOS192C FEBRUARY 1997 REVISED APRIL 2010

TLE20x7I operating characteristics at specified free-air temperature, VCC = 15 V, TA = 25C (unless otherwise specified)
PARAMETER TEST CONDITIONS RL = 2 k, CL = 100 pF pF, See Figure 1 SR Slew rate at unity gain RL = 2 k, CL = 100 pF, TA = 40C to 85C, See Figure 1 RS = 20 , RS = 20 , f = 0.1 Hz to 10 Hz f = 10 Hz f = 1 kHz VO = + 10 V, AVD = 1, See Note 5 VO = + 10 V, AVD = 5, See Note 5 RL = 2 k, CL = 100 pF RL = 2 k, CL = 100 pF RL = 2 k RL = 2 k , CL = 100 pF TLE2027 TLE2027 TLE2037 TLE2027 TLE2037 f = 10 Hz f = 1 kHz TLE20x7I MIN 1.7 6 1.1 4.7 3.3 2.5 50 10 0.8 < 0.002% 8 4.5 250 25 1,8 TYP 2.8 7.5 MAX MIN 1.7 6 1.1 4.7 3.3 2.5 50 10 0.8 < 0.002% 4.5 3.8 130 25 1.8 nV/Hz nV pA/Hz TLE20x7AI TYP 2.8 7.5 V/s MAX UNIT

Vn VN(PP) In

Equivalent input noise voltage (see Figure 2) Peak-to-peak equivalent input noise voltage Equivalent input noise current

THD

Total harmonic distortion

TLE2037 TLE2027 TLE2037 TLE2027 TLE2037 TLE2027 TLE2037 9(6) 35

< 0.002% 13 50 30 80 55 50 9(6) 35

< 0.002% 13 MHz 50 30 80 55 50 kHz

B1 GBW BOM

Unity-gain bandwidth (see Figure 3) Gain bandwidth product Maximum output-swing output swing bandwidth Phase margin at unity gain (see Figure 3)

NOTE 5: Measured distortion of the source used in the analysis was 0.002%. NOTE 6: This parameter is not production tested.

www.ti.com

SLOS192C FEBRUARY 1997 REVISED APRIL 2010

TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS
TLE20x7M electrical characteristics at specified free-air temperature, VCC = 15 V (unless otherwise noted)
PARAMETER VIO Input offset voltage Temperature coefficient of input offset voltage Input offset voltage long-term drift (see Note 4) IIO IIB Input offset current Input bias current VIC = 0, RS = 50 TEST CONDITIONS TA 25C Full range Full range 25C 25C Full range 25C Full range 25C VICR Common mode Common-mode input voltage range RS = 50 Full range 25C Full range 25C Full range 25C Full range 25C Full range 25C Full range 25C Full range 25C 25C IO = 0 VIC = VICRmin, RS = 50 VCC = 4 V to 18 V, RS = 50 VCC = 4 V to 18 V, RS = 50 VO = 0, 0 No load 25C 25C Full range 25C Full range 25C Full range 100 96 94 90 3.8 5.3 5.6 144 11 to 11 10.3 to 10.3 10.5 10 12 11 10.5 10 12 11 5 2.5 3.5 1.8 2 19 8 50 131 117 113 110 105 3.8 5.3 5.6 mA 144 dB 38 45 13.5 13 13.2 12.9 13 to 13 15 0.4 0.006 6 TLE20x7M MIN TYP 20 MAX 100 200 1* 1* 90 150 90 150 11 to 11 10.4 to 10.4 10.5 10 12 11 10.5 10 12 11 10 3.5 8 2.2 5 19 8 50 131 pF

TLE20x7AM MIN TYP 10 MAX 25 105 0.2 0.006 6 15 13 to 13 1* 1* 90 150 90 150

UNIT V V V/C V/mo nA nA

VIO

VOM +

Maximum positive peak p g g output voltage swing

RL = 600 RL = 2 k RL = 600 RL = 2 k VO = 11 V, RL = 2 k

12.9 13.2 13 13.5 45 38 V/V V V

VOM

Maximum negative peak output voltage swing

AVD

Large-signal diff L i l differential ti l voltage amplification

VO = 10 V, RL = 2 k V, VO = 10 V RL = 1 k VO = 10 V RL = 600 V,

Ci

Input capacitance Open-loop output impedance Common mode Common-mode rejection ratio Supply voltage Supply-voltage rejection ratio (VCC /VIO) Supply current

zo CMRR

dB

kSVR

ICC

* On products compliant to MIL-PRF-38535, this parameter is not production tested. Full range is 55C to 125C. NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150C extrapolated to TA = 25C using the Arrhenius equation and assuming an activation energy of 0.96 eV.

10

www.ti.com

TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS
SLOS192C FEBRUARY 1997 REVISED APRIL 2010

TLE20x7M operating characteristics at specified free-air temperature, VCC = 15 V, TA = 25C (unless otherwise specified)
PARAMETER TEST CONDITIONS RL = 2 k, CL = 100 pF pF, See Figure 1 SR Slew rate at unity gain RL = 2 k, CL = 100 pF, TA = 55C to 125C, See Figure 1 RS = 20 , RS = 20 , f = 0.1 Hz to 10 Hz f = 10 Hz f = 1 kHz VO = + 10 V, AVD = 1, See Note 5 VO = + 10 V, AVD = 5, See Note 5 RL = 2 k, CL = 100 pF RL = 2 k RL = 2 k, CL = 100 pF TLE2027 TLE2027 TLE2037 TLE2027 TLE2037 f = 10 Hz f = 1 kHz TLE20x7M MIN 1.7 6* 1 4.4* 3.3 2.5 225 25 2.5 < 0.002% 8* 4* 375* TYP 2.8 7.5 MAX MIN 1.7 6* 1 4.4* 3.3 2.5 225 25 2.5 < 0.002% 8* 4* 375* nV/Hz nV pA/Hz TLE20x7AM TYP 2.8 7.5 V/s MAX UNIT

Vn VN(PP) In

Equivalent input noise voltage (see Figure 2) Peak-to-peak equivalent input noise voltage Equivalent input noise current

THD

Total harmonic distortion

TLE2037 TLE2027 TLE2037 TLE2027 TLE2037 TLE2027 TLE2037 7* 35

< 0.002% 13 50 30 80 55 50 9* 35

< 0.002% 13 50 30 80 55 50

B1 BOM

Unity gain Unity-gain bandwidth (see Figure 3) Maximum output-swing output swing bandwidth Phase margin at unity gain (see Figure 3)

MHz kHz

* On products compliant to MIL-PRF-38535, this parameter is not production tested. NOTE 5: Measured distortion of the source used in the analysis was 0.002%.

www.ti.com

11

SLOS192C FEBRUARY 1997 REVISED APRIL 2010

TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS
TLE20x7Y electrical characteristics, VCC = 15 V, TA = 25C (unless otherwise noted)
PARAMETER VIO Input offset voltage Input offset voltage long-term drift (see Note 4) IIO IIB VICR Input offset current Input bias current Common-mode input voltage range RS = 50 RL = 600 RL = 2 k RL = 600 RL = 2 k VO = 11 V, AVD Large-signal differential voltage amplification VO = 10 V, VO = 10 V, RL = 600 IO = 0 VIC = VICRmin, RS = 50 RL = 2 k RL = 1 k VIC = 0, RS = 50 TEST CONDITIONS TLE20x7Y MIN TYP 20 0.006 6 15 13 to 13 12.9 13.2 13 13.5 45 38 19 8 50 131 144 3.8 pF

MAX

UNIT V V/mo nA nA V

VOM + VOM

Maximum positive peak output voltage swing Maximum negative peak output voltage swing

V V

V/V

Ci zo CMRR kSVR ICC

Input capacitance Open-loop output impedance Common-mode rejection ratio Supply-voltage rejection ratio (VCC Supply current

dB dB mA

/VIO)

VCC = 4 V to 18 V, RS = 50 VO = 0, No load

NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150C extrapolated to TA = 25C using the Arrhenius equation and assuming an activation energy of 0.96 eV.

12

www.ti.com

TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS
SLOS192C FEBRUARY 1997 REVISED APRIL 2010

TLE20x7Y operating characteristics at specified free-air temperature, VCC = 15 V


PARAMETER SR Vn VN(PP) In Slew rate at unity gain Equivalent input noise voltage (see Figure 2) Peak-to-peak equivalent input noise voltage Equivalent input noise current TEST CONDITIONS RL = 2 k, CL = 100 pF, See Figure 1 RS = 20 , RS = 20 , f = 10 Hz f = 1 kHz VO = + 10 V, AVD = 1, See Note 5 VO = + 10 V, AVD = 5, See Note 5 RL = 2 k k, RL = 2 k RL = 2 k k, CL = 100 pF CL = 100 pF TLE2027 TLE2037 TLE2027 TLE2037 TLE2027 TLE2037 TLE2027 TLE2037 f = 10 Hz f = 1 kHz TLE2027 TLE2037 TLE20x7Y MIN TYP 2.8 7.5 3.3 2.5 50 10 0.8 < 0.002% < 0.002% 13 50 30 80 55 50 MHz kHz MAX UNIT V/s V/ s nV/Hz nV pA/Hz

f = 0.1 Hz to 10 Hz

THD

Total harmonic distortion

B1 BOM

Unity-gain Unity gain bandwidth (see Figure 3) Maximum output swing bandwidth output-swing Phase margin at unity gain (see Figure 3)

NOTE 5: Measured distortion of the source used in the analysis was 0.002%.

www.ti.com

13

SLOS192C FEBRUARY 1997 REVISED APRIL 2010

TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS
PARAMETER MEASUREMENT INFORMATION
Rf 15 V RI VI + 15 V CL = 100 pF (see Note A) RL = 2 k 20 VO + 20 15 V VO 2 k 15 V

NOTE A: CL includes fixture capacitance.

Figure 1. Slew-Rate Test Circuit


10 k 100 15 V VO + 15 V CL = 100 pF (see Note A) 2 k

Figure 2. Noise-Voltage Test Circuit


Rf 15 V RI VI + 15 V CL = 100 pF (see Note A) 2 k VO

VI

NOTE A: CL includes fixture capacitance.

NOTES: A. CL includes fixture capacitance. B. For the TLE2037 and TLE2037A, AVD must be 5.

Figure 3. Unity-Gain Bandwidth and Phase-Margin Test Circuit (TLE2027 Only)

Figure 4. Small-Signal PulseResponse Test Circuit

14

www.ti.com

TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS
SLOS192C FEBRUARY 1997 REVISED APRIL 2010

typical values
Typical values presented in this data sheet represent the median (50% point) of device parametric performance.

initial estimates of parameter distributions


In the ongoing program of improving data sheets and supplying more information to our customers, Texas Instruments has added an estimate of not only the typical values but also the spread around these values. These are in the form of distribution bars that show the 95% (upper) points and the 5% (lower) points from the characterization of the initial wafer lots of this new device type (see Figure 5). The distribution bars are shown at the points where data was actually collected. The 95% and 5% points are used instead of 3 sigma since some of the distributions are not true Gaussian distributions. The number of units tested and the number of different wafer lots used are on all of the graphs where distribution bars are shown. As noted in Figure 5, there were a total of 835 units from two wafer lots. In this case, there is a good estimate for the within-lot variability and a possibly poor estimate of the lot-to-lot variability. This is always the case on newly released products since there can only be data available from a few wafer lots. The distribution bars are not intended to replace the minimum and maximum limits in the electrical tables. Each distribution bar represents 90% of the total units tested at a specific temperature. While 10% of the units tested fell outside any given distribution bar, this should not be interpreted to mean that the same individual devices fell outside every distribution bar.
SUPPLY CURRENT vs FREE-AIR TEMPERATURE
5 VCC = 15 V VO = 0 No Load Sample Size = 835 Units From 2 Water Lots 95% point on the distribution bar (5% of the devices fell above this point.) 90% of the devices were within the upper and lower points on the distribution bar. 5% point on the distribution bar (5% of the devices fell below this point.)

I CC Supply Current mA

4.5

3.5

2.5 75 50 25


0 25 50 75 100 125 150 TA Free-Air Temperature C
www.ti.com

Figure 5. Sample Graph With Distribution Bars

15

SLOS192C FEBRUARY 1997 REVISED APRIL 2010

TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS
TYPICAL CHARACTERISTICS Table of Graphs
FIGURE VIO Input offset voltage Input offset voltage change Input offset current Input bias current Input current Maximum peak-to-peak output voltage Maximum (positive/negative) peak output voltage Distribution vs vs vs vs vs vs vs vs vs vs vs vs vs vs vs vs vs vs vs vs Time after power on Free-air temperature Free-air temperature Free air Common-mode input voltage Differential input voltage Frequency Load resistance Free-air temperature Supply voltage Load resistance Frequency Free-air temperature Frequency Frequency Frequency Supply voltage Elapsed time Free-air temperature Supply voltage Free-air temperature 6, 7 8, 9 10 11 12 13 14, 15 16, 17 18, 19 20 21 22 25 26 27 28 29 30, 31 32, 33 34, 35 36 37 38, 40 39, 41 42 43 44 45 46 47 48, 49 50, 51 52, 53 54, 55 22 25

VIO
IIO IIB II VO(PP) VOM

AVD zo CMRR kSVR IOS ICC

Large-signal Large signal differential voltage amplification Output impedance Common-mode rejection ratio Supply-voltage rejection ratio Short circut Short-circut output current

Supply current Voltage-follower Voltage follower pulse response

Small signal Large signal vs vs vs vs vs vs vs vs vs vs Frequency Supply voltage Load capacitance Supply voltage Load capacitance Free-air temperature Supply voltage Load capacitance Free-air temperature Frequency Over 10-second interval

Vn

Equivalent input noise voltage Noise voltage (referred to input)

B1

Unity gain bandwidth Unity-gain Gain bandwidth product

SR

Slew rate Phase margin Phase shift

16

www.ti.com

TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS
SLOS192C FEBRUARY 1997 REVISED APRIL 2010

TYPICAL CHARACTERISTICS
DISTRIBUTION INPUT OFFSET VOLTAGE
16 14 Percentage of Amplifiers % 12 10 8 6 4 2 0 120 90 60 30 0 30 60 90 120

AVIO VIO Change in Input Offset Voltage V

VIO Input Offset Voltage V

Figure 6
INPUT OFFSET VOLTAGE CHANGE vs TIME AFTER POWER ON
AVIO VIO Change in Input Offset Voltage V 6 5 4 3 2 1 0

IIO Input Offset Current nA I IO

50 Amplifiers Tested From 2 Wafer Lots VCC = 15 V TA = 25C P Package 40 60 80

20

100 120 140 160 180

t Time After Power On s

Figure 8

Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.

www.ti.com

25 20 15 10 5 0 75 50 25

TA Free-Air Temperature C

Figure 9

1568 Amplifiers Tested From 2 Wafer Lots VCC = +15 V TA = 25C D Package

INPUT OFFSET VOLTAGE CHANGE vs TIME AFTER POWER ON


12 10 8 6 4 2 50 Amplifiers Tested From 2 Wafer Lots VCC = 15 V TA = 25C D Package 10 20 30 40 50 t Time After Power On s

60

Figure 7

INPUT OFFSET CURRENT vs FREE-AIR TEMPERATURE


30 VCC = 15 V VIC = 0 Sample Size = 833 Units From 2 Wafer Lots

25

50

75

100 125 150

17

SLOS192C FEBRUARY 1997 REVISED APRIL 2010

TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS
TYPICAL CHARACTERISTICS
INPUT BIAS CURRENT vs FREE-AIR TEMPERATURE INPUT BIAS CURRENT vs COMMON-MODE INPUT VOLTAGE
40 35 IIB I IB Input Bias Current nA 30 25 20 15 10 5 0 12 8 4 0 4 8 VIC Common-Mode Input Voltage V 12 VCC = 15 V TA = 25C

50 IIB I IB Input Bias Current nA 40 30 20 10 0 10

20 75 50 25 0 25 50 75 100 125 150 TA Free-Air Temperature C

Figure 10

VO(PP) Maximum Peak-to-Peak Output Voltage V

1 0.8 0.6 III Input Current mA I 0.4 0.2 0 0.2 0.4 0.6 0.8 1 1.8 1.2 0.6 0 0.6 1.2 1.8

VCC = 15 V VIC = 0 TA = 25C

25

20

15

TA = 125C

10

5 TA = 55C 0 10 k 100 k 1M 10 M

VID Differential Input Voltage V

f Frequency Hz

Figure 12

Figure 13

Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.

18

www.ti.com

INPUT CURRENT vs DIFFERENTIAL INPUT VOLTAGE


VCC = 15 V VIC = 0 Sample Size = 836 Units From 2 Wafer Lots

60

Figure 11
TLE2027 MAXIMUM PEAK-TO-PEAK OUTPUT VOLTAGE vs FREQUENCY
30 VCC = 15 V RL = 2 k

TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS
SLOS192C FEBRUARY 1997 REVISED APRIL 2010

TLE2037 MAXIMUM PEAK-TO-PEAK OUTPUT VOLTAGE vs FREQUENCY


VO(PP) Maximum Peak-to-Peak Output Voltage V VO(PP) 30

TYPICAL CHARACTERISTICS
MAXIMUM POSITIVE PEAK OUTPUT VOLTAGE vs LOAD RESISTANCE
14 12 10 8 6 4 2 VCC = 15 V TA = 25C

25

VCC = 15 V RL = 2 k

20

10

TA = 55C 5

0 10 k

100 k

1M f Frequency Hz

10 M

100 M

Figure 14
MAXIMUM NEGATIVE PEAK OUTPUT VOLTAGE vs LOAD RESISTANCE

VOM Maximum Negative Peak Output Voltage V VOM

VOM + Maximum Positive Peak Output Voltage V VOM+

12 10 8 6 4 2 VCC = 15 V

13.4

13.3

13.2

13.1

13

TA = 25C

0 100

1k RL Load Resistance

10 k

12.9 75 50 25

Figure 16

Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.

www.ti.com

14


TA = 125C

15

VOM + Maximum Positive Peak Output Voltage V VOM+

0 100

1k RL Load Resistance

10 k

Figure 15

MAXIMUM POSITIVE PEAK OUTPUT VOLTAGE vs FREE-AIR TEMPERATURE

13.5

VCC = 15 V RL = 2 k Sample Size = 832 Units From 2 Wafer Lots

25

50

75

100 125 150

TA Free-Air Temperature C

Figure 17

19

SLOS192C FEBRUARY 1997 REVISED APRIL 2010

TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS
TYPICAL CHARACTERISTICS
MAXIMUM NEGATIVE PEAK OUTPUT VOLTAGE vs FREE-AIR TEMPERATURE
13 AVD Large-Signal differential AVD Voltage Amplification V/ V

LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION vs SUPPLY VOLTAGE

VOM Maximum Negative Peak Output Voltage V VOM

13.2

13.4

13.6

13.8

14 75 50 25

25

50

75

100 125 150

TA Free-Air Temperature C

Figure 18
LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION vs LOAD RESISTANCE

AVD Large-Signal differential AVD Voltage Amplification V/ V

40

30

20

10

0 100

Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.

20

50

VCC = 15 V TA = 25C

200

400

RL Load Resistance

Figure 20

www.ti.com

VCC = 15 V RL = 2 k Sample Size = 831 Units From 2 Wafer Lots

40

30

20 RL = 600 10

1k

2k

0 4 8 12

50

TA = 25C

RL = 2 k RL = 1 k

16

20

VCC Supply Voltage V

Figure 19

4k

10 k

TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS
SLOS192C FEBRUARY 1997 REVISED APRIL 2010

TYPICAL CHARACTERISTICS
TLE2027 LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION AND PHASE SHIFT vs FREQUENCY
160 140 AVD Large-Signal Differential AVD Voltage Amplification dB 120 AVD Phase Shift Phase Shift 100 80 60 40 20 0 150 175 200 225 250 275 100 M Phase Shift 75 100 125

140 AVD Large-Signal Differential AVD Voltage Amplification dB 120 100 80 60 40 20

VCC = 15 V

RL = 2 k CL = 100 pF TA = 25C

0 0.1

VCC = 15 V RL = 2 k CL = 100 pF TA = 25C 100 100 k f Frequency Hz

0.1

Figure 21
TLE2037 LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION AND PHASE SHIFT vs FREQUENCY
160 Phase Shift

75 100 125 150 175 200 225 250

AVD

100

100 k

275 100 M

f Frequency MHz

Figure 22

www.ti.com

21

SLOS192C FEBRUARY 1997 REVISED APRIL 2010

TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS
TYPICAL CHARACTERISTICS
TLE2027 LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION AND PHASE SHIFT vs FREQUENCY
6 3 AVD Large-Signal Differential AVD Voltage Amplification dB 0 3 6 Phase Shift 9 12 15 18 225 250 275 300 100 100 125 150 Phase Shift Phase Shift 175 200

AVD

10

30 25 AVD Large-Signal Differential AVD Voltage Amplification dB 20 15 10 5 0 VCC = 15 V RL = 2 k CL = 100 pF TA = 25C 2

10

22


20 AVD

VCC = 15 V RL = 2 k CL = 100 pF TA = 25C

40

70

f Frequency MHz

Figure 23

TLE2037 LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION AND PHASE SHIFT vs FREQUENCY


100 125 150 175 200 225 250 275 300

Phase Shift

4 10 20 f Frequency MHz

40

100

Figure 24

www.ti.com

TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS
SLOS192C FEBRUARY 1997 REVISED APRIL 2010

TYPICAL CHARACTERISTICS
LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION vs FREE-AIR TEMPERATURE
60 VCC = 15 V AVD Large-Signal differential AVD Voltage Amplification V/ V 100

OUTPUT IMPEDANCE vs FREQUENCY

zo Output Impedance zo

50

RL = 2 k

RL = 1 k

30 75 50 25

25

50

75

100 125 150

TA Free-Air Temperature C

Figure 25
COMMON-MODE REJECTION RATIO vs FREQUENCY
140 CMRR Common-Mode Rejection Ratio dB 120 100 80 60 40 20 0 TA = 25C KSVR Supply-Voltage Rejection Ratio dB 140 VCC = 15 V 120 100

80 60 40 20 0 10

10

100

1k 10 k 100 k 1 M f Frequency Hz

10 M 100 M

100

1k 10 k 100 k 1 M f Frequency Hz

Figure 27

Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.

www.ti.com

kSVR

kSVR +

Figure 28

40


10 1 AVD = 10 10 100 10 100 1k

VCC = 15 V TA = 25C

AVD = 100 See Note A

10 k

100 k

1M

10 M 100 M

f Frequency Hz NOTE A: For this curve, the TLE2027 is AVD = 1 and the TLE2037 is AVD = 5.

Figure 26
SUPPLY-VOLTAGE REJECTION RATIO vs FREQUENCY
VCC = 15 V TA = 25C

10 M 100 M

23

SLOS192C FEBRUARY 1997 REVISED APRIL 2010

TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS
TYPICAL CHARACTERISTICS
SHORT-CIRCUIT OUTPUT CURRENT vs SUPPLY VOLTAGE
IIOS Short-Circuit Output Current mA OS

SHORT-CIRCUIT OUTPUT CURRENT vs SUPPLY VOLTAGE

IIOS Short-Circuit Output Current mA OS

40

VID = 100 mV VO = 0 TA = 25C P Package

42 40 38 36 34 32

38

36

34

30

4 6 8 10 12 14 16 VCC Supply Voltage V

18

20

Figure 29
SHORT-CIRCUIT OUTPUT CURRENT vs ELAPSED TIME
45 IIOS Short-Circuit Output Current mA OS

43

IIOS Short-Circuit Output Current mA OS

VID = 100 mV VO = 0 TA = 25C P Package

42

41

40

39

38

37

36

35

30

60 90 120 t Elasped Time s

150

180

34

Figure 31

24

www.ti.com

VCC = 15 V

32

30

44


VID = 100 mV VO = 0 TA = 25C P Package 0 2 4 6 8 10 12 14 16 VCC Supply Voltage V 18 20

42

44

Figure 30
SHORT-CIRCUIT OUTPUT CURRENT vs ELAPSED TIME
VCC = 15 V

VID = 100 mV VO = 0 TA = 25C P Package

30

60 90 120 t Elasped Time s

150

180

Figure 32

TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS
SLOS192C FEBRUARY 1997 REVISED APRIL 2010

TYPICAL CHARACTERISTICS
SHORT-CIRCUIT OUTPUT CURRENT vs FREE-AIR TEMPERATURE
48 IIOS Short-Circuit Output Current mA OS IIOS Short-Circuit Output Current mA OS 46 VCC = 15 V VID = 100 mV VO = 0 P Package

SHORT-CIRCUIT OUTPUT CURRENT vs FREE-AIR TEMPERATURE

44

42

40

38

36

34

32

28

30

24 75 50 25 0 25 50 75 100 125 150 TA Free-Air Temperature C

26 75 50 25 0 25 50 75 100 125 150 TA Free-Air Temperature C

Figure 33
SUPPLY CURRENT vs SUPPLY VOLTAGE

Figure 34
SUPPLY CURRENT vs FREE-AIR TEMPERATURE

4 6 8 10 12 14 16 VCC Supply Voltage V

18

20

Figure 35

Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.

www.ti.com

5 ICC Supply Current mA I CC

VO = 0 No Load

TA = 125C

ICC I CC Supply Current mA

4.5

TA = 25C

TA = 55C

3.5

2.5 75 50 25 0 25 50 75 100 125 150 TA Free-Air Temperature C

VCC = 15 V VO = 0 No Load Sample Size = 836 Units From 2 Wafer Lots

Figure 36


VCC = 15 V VID = 100 mV VO = 0 P Package 25

SLOS192C FEBRUARY 1997 REVISED APRIL 2010

TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS
TYPICAL CHARACTERISTICS
TLE2027 VOLTAGE-FOLLOWER SMALL-SIGNAL PULSE RESPONSE TLE2027 VOLTAGE-FOLLOWER LARGE-SIGNAL PULSE RESPONSE

VO Output Voltage mV

VO Output Voltage V

50

VCC = 15 V RL = 2 k CL = 100 pF TA = 25C See Figure 4

10

50

10

100

200

400 600 t Time ns

800

1000

15

Figure 37
TLE2037 VOLTAGE-FOLLOWER SMALL-SIGNAL PULSE RESPONSE
100 15

10 VO Output Voltage mV VO VO Output Voltage V VO 50

50

100

100

200

300

400

t Time ns

Figure 39

26

www.ti.com

VCC = 15 V AVD = 5 RL = 2 k CL = 100 pF TA = 25C See Figure 4

10

15


VCC = 15 V RL = 2 k CL = 100 pF TA = 25C See Figure 1 0 5 10 15 t Time s 20 25

100

15

Figure 38
TLE2037 VOLTAGE-FOLLOWER LARGE-SIGNAL PULSE RESPONSE
VCC = 15 V AVD = 5 RL = 2 k CL = 100 pF TA = 25C See Figure 1

4 6 t Time s

10

Figure 40

TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS
SLOS192C FEBRUARY 1997 REVISED APRIL 2010

TYPICAL CHARACTERISTICS
EQUIVALENT INPUT NOISE VOLTAGE vs FREQUENCY
Vn Equivalent Input Noise Voltage nVHz Hz Vn nV/

NOISE VOLTAGE (REFERRED TO INPUT) OVER A 10-SECOND INTERVAL

Noise Voltage nV

VCC = 15 V RS = 20 TA = 25C See Figure 2 Sample Size = 100 Units From 2 Wafer Lots

40 30 20 10

0 10 20 30 40

10

100

1k

10 k

100 k

50

f Frequency Hz

Figure 41
TLE2027 UNITY-GAIN BANDWIDTH vs SUPPLY VOLTAGE
20 RL = 2 k CL = 100 pF TA = 25C See Figure 3 52

B1 Unity-Gain Bandwidth MHz

Gain-Bandwidth Product MHz

18

51

16

50

14

12

49

10

48 0 2 4 8 10 12 14 16 18 | VCC | Supply Voltage V 6 20 22

Figure 43

www.ti.com


VCC = 15 V f = 0.1 to 10 Hz TA = 25C 0 2 4 6 8 10 t Time s

10

50

Figure 42

TLE2037 GAIN-BANDWIDTH PRODUCT vs SUPPLY VOLTAGE


f = 100 kHz RL = 2 k CL = 100 pF TA = 25C

10

12

14

16

18

20

VCC Supply Voltage V

Figure 44

27

SLOS192C FEBRUARY 1997 REVISED APRIL 2010

TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS
TYPICAL CHARACTERISTICS
TLE2027 UNITY-GAIN BANDWIDTH vs LOAD CAPACITANCE
16 VCC = 15 V RL = 2 k TA = 25C See Figure 3 52

TLE2037 GAIN-BANDWIDTH PRODUCT vs LOAD CAPACITANCE

B1 Unity-Gain Bandwidth MHz

12

Gain-Bandwidth Product MHz

51

50

49

100

1000 CL Load Capacitance pF

10000

48 100

1000 CL Load Capacitance pF

Figure 45
TLE2027 SLEW RATE vs FREE-AIR TEMPERATURE
3 10

Figure 46
TLE2037 SLEW RATE vs FREE-AIR TEMPERATURE

2.8 SR Slew Rate V/ s SR Slew Rate V/ s

VCC = 15 V AVD = 5 RL = 2 k CL = 100 pF See Figure 1

2.6

2.4

2.2

VCC = 15 V AVD = 1 RL = 2 k CL = 100 pF See Figure 1

2 75 50 25

25

50

75

100 125 150

TA Free-Air Temperature C

5 75 50 25 0 25 50 75 100 125 150 TA Free-Air Temperature C

Figure 47

Figure 48

Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.

28

www.ti.com


10000

VCC = 15 V RL = 2 k TA = 25C

TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS
SLOS192C FEBRUARY 1997 REVISED APRIL 2010

TYPICAL CHARACTERISTICS
TLE2027 PHASE MARGIN vs SUPPLY VOLTAGE TLE2037 PHASE MARGIN vs SUPPLY VOLTAGE

56 54 m Phase Margin 52 50 48 46 44 42

RL = 2 k CL = 100 pF TA = 25C See Figure 3

50 48 46 44 42 40 38

m Phase Margin

10

12

14

16

18

20

22

| VCC | Supply Voltage V

Figure 49

TLE2027 PHASE MARGIN vs LOAD CAPACITANCE

50

VCC = 15 V RL = 2 k TA = 25C See Figure 3

50

m Phase Margin

m Phase Margin

40

40

30

30

20

20

10

10 0 100

100

1000 CL Load Capacitance pF

1000 CL Load Capacitance pF

Figure 51

Figure 52

www.ti.com

60

60


AVD = 5 RL = 2 k CL = 100 pF TA = 25C 2 4 6 8 10 12 14 16 18 20 VCC Supply Voltage V

58

52

Figure 50
TLE2037 PHASE MARGIN vs LOAD CAPACITANCE
VCC = 15 V RL = 2 k TA = 25C

10000

29

SLOS192C FEBRUARY 1997 REVISED APRIL 2010

TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS
TYPICAL CHARACTERISTICS
TLE2027 PHASE MARGIN vs FREE-AIR TEMPERATURE
65 VCC = 15 V RL = 2 k TA = 25C See Figure 3 55

TLE2037 PHASE MARGIN vs FREE-AIR TEMPERATURE

60

53 m Phase Margin

m Phase Margin

55

51

50

49

45

47 40 45 75 50 25

35 0 25 50 75 100 75 50 25 TA Free-Air Temperature C

125

150

25

50

TA Free-Air Temperature C

Figure 53

Figure 54

Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.

30

www.ti.com


VCC = 15 V AVD = 5 RL = 2 k CL = 100 pF 75 100 125 150

TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS
SLOS192C FEBRUARY 1997 REVISED APRIL 2010

APPLICATION INFORMATION input offset voltage nulling


The TLE2027 and TLE2037 series offers external null pins that can be used to further reduce the input offset voltage. The circuits of Figure 55 can be connected as shown if the feature is desired. If external nulling is not needed, the null pins may be left disconnected.
1 k 10 k VCC + 4.7 k 4.7 k IN IN + OUT + VCC (a) STANDARD ADJUSTMENT IN + + VCC (b) ADJUSTMENT WITH IMPROVED SENSITIVITY IN OUT VCC +

Figure 55. Input Offset Voltage Nulling Circuits

voltage-follower applications
The TLE2027 circuitry includes input-protection diodes to limit the voltage across the input transistors; however, no provision is made in the circuit to limit the current if these diodes are forward biased. This condition can occur when the device is operated in the voltage-follower configuration and driven with a fast, large-signal pulse. It is recommended that a feedback resistor be used to limit the current to a maximum of 1 mA to prevent degradation of the device. Also, this feedback resistor forms a pole with the input capacitance of the device. For feedback resistor values greater than 10 k, this pole degrades the amplifier phase margin. This problem can be alleviated by adding a capacitor (20 pF to 50 pF) in parallel with the feedback resistor (see Figure 56).
CF = 20 to 50 pF IF 1 mA RF VCC VO VI + VCC

Figure 56. Voltage Follower

www.ti.com

31

SLOS192C FEBRUARY 1997 REVISED APRIL 2010

TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS
APPLICATION INFORMATION macromodel information
Macromodel information provided was derived using Microsim Parts, the model generation software used with Microsim PSpice . The Boyle macromodel (see Note 6) and subcircuit in Figure 57, Figure 58, and Figure 59 were generated using the TLE20x7 typical electrical and operating characteristics at 25C. Using this information, output simulations of the following key parameters can be generated to a tolerance of 20% (in most cases):

Maximum positive output voltage swing Maximum negative output voltage swing Slew rate Quiescent power dissipation Input bias current Open-loop voltage amplification


99 +

Gain-bandwidth product Common-mode rejection ratio Phase margin DC output resistance AC output resistance Short-circuit output current limit

NOTE 6: G. R. Boyle, B. M. Cohn, D. O. Pederson, and J. E. Solomon, Macromodeling of Integrated Circuit Operational Amplifiers, IEEE Journal of Solid-State Circuits, SC-9, 353 (1974). 3 rp rc1 11 Q1 2 dp 13 re1 lee VCC 4 14 c1 rc2 12 Q2 ree re2 10 ve + cee vc 53 dc + r2 6 gcm dln ro2 90 + dip 7 vlim 8 + ro1 5 OUT 91 + vip

VCC + 1

9 egnd + vb

fb

92 + vin

IN + IN

hlim C2 ga

54 de

Figure 57. Boyle Macromodel

PSpice and Parts are trademarks of MicroSim Corporation.

32

www.ti.com

TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS
SLOS192C FEBRUARY 1997 REVISED APRIL 2010

APPLICATION INFORMATION macromodel information (continued)


.subckt TLE2027 1 2 3 4 5 * c1 11 12 4.003E-12 c2 6 7 20.00E-12 dc 5 53 dz de 54 5 dz dlp 90 91 dz dln 92 90 dx dp 4 3 dz egnd 99 0 poly(2) (3,0) (4,0) 0 5 .5 fb 7 99 poly(5) vb vc ve vlp vln 0 954.8E6 1E9 1E9 1E9 1E9 ga 6 0 11 12 2.062E-3 gcm 0 6 10 99 531.3E-12 iee 10 4 dc 56.01E-6 hlim 90 0 vlim 1K q1 11 2 13 qx q2 12 1 14 qx r2 6 9 100.0E3 rc1 3 11 530.5 rc2 3 12 530.5 re1 13 10 393.2 re2 14 10 393.2 ree 10 99 3.571E6 ro1 8 5 25 ro2 7 99 25 rp 3 4 8.013E3 vb 9 0 dc 0 vc 3 53 dc 2.400 ve 54 4 dc 2.100 vlim 7 8 dc 0 vlp 91 0 dc 40 vln 0 92 dc 40 .modeldx D(Is=800.0E-18) .modelqx NPN(Is=800.0E-18 Bf=7.000E3) .ends

Figure 58. TLE2027 Macromodel Subcircuit


.subckt TLE2037 1 2 3 4 5 * c1 11 12 4.003E12 c2 6 7 7.500E12 dc 5 53 dz de 54 5 dz dlp 90 91 dz dln 92 90 dx dp 4 3 dz egnd 99 0 poly(2) (3,0) (4,0) 0 .5 .5 fb 7 99 poly(5) vb vc ve vip vln 0 923.4E6 A800E6 800E6 800E6 A800E6 ga 6 0 11 12 2.121E3 gcm 0 6 10 99 597.7E12 iee 10 4 dc 56.26E6 hlim 90 0 vlim 1K q1 11 2 13 qx q2 12 1 14 qz r2 6 9 100.0E3 rc1 3 11 471.5 rc2 3 12 471.5 re1 13 10 A448 re2 14 10 A448 ree 10 99 3.555E6 ro1 8 5 25 ro2 7 99 25 rp 3 4 8.013E3 vb 9 0 dc 0 vc 3 53 dc 2.400 ve 54 4 dc 2.100 vlim 7 8 dc 0 vlp 91 0 dc 40 vln 0 92 dc 40 .model dxD(Is=800.0E18) .model qxNPN(Is=800.0E18 Bf=7.031E3) .ends

Figure 59. TLE2037 Macromodel Subcircuit

www.ti.com

33

TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS
SLOS192C FEBRUARY 1997 REVISED APRIL 2010

REVISION HISTORY
Changes from Revision B (October 2006) to Revision C

Changed values of Vn, VN(PP), and In . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . 11

34

www.ti.com

PACKAGE OPTION ADDENDUM

www.ti.com

5-Sep-2011

PACKAGING INFORMATION
Orderable Device 5962-9089601M2A 5962-9089601MPA 5962-9089602MPA 5962-9089603Q2A 5962-9089603QPA TLE2027ACD TLE2027ACP TLE2027AID TLE2027AIP TLE2027AMD TLE2027AMDG4 TLE2027AMFKB TLE2027AMJG TLE2027AMJGB TLE2027CD TLE2027CDG4 TLE2027CDR TLE2027CDRG4 TLE2027CP TLE2027ID TLE2027IDG4 TLE2027IDR TLE2027IDRG4 Status
(1)

Package Type Package Drawing LCCC CDIP CDIP LCCC CDIP SOIC PDIP SOIC PDIP SOIC SOIC LCCC CDIP CDIP SOIC SOIC SOIC SOIC PDIP SOIC SOIC SOIC SOIC FK JG JG FK JG D P D P D D FK JG JG D D D D P D D D D

Pins 20 8 8 20 8 8 8 8 8 8 8 20 8 8 8 8 8 8 8 8 8 8 8

Package Qty 1 1 1 1

Eco Plan TBD TBD TBD TBD TBD TBD TBD TBD TBD

(2)

Lead/ Ball Finish Call TI Call TI Call TI Call TI Call TI Call TI Call TI Call TI Call TI

MSL Peak Temp Call TI Call TI Call TI Call TI Call TI Call TI Call TI Call TI Call TI

(3)

Samples (Requires Login)

ACTIVE ACTIVE OBSOLETE ACTIVE ACTIVE OBSOLETE OBSOLETE OBSOLETE OBSOLETE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE OBSOLETE ACTIVE ACTIVE ACTIVE ACTIVE

75 75 1 1 1 75 75 2500 2500

TBD Green (RoHS & no Sb/Br) TBD TBD TBD Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) TBD Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br)

CU NIPDAU Level-1-220C-UNLIM CU NIPDAU Level-1-260C-UNLIM POST-PLATE N / A for Pkg Type A42 A42 N / A for Pkg Type N / A for Pkg Type

CU NIPDAU Level-1-260C-UNLIM CU NIPDAU Level-1-260C-UNLIM CU NIPDAU Level-1-260C-UNLIM CU NIPDAU Level-1-260C-UNLIM Call TI Call TI

75 75 2500 2500

CU NIPDAU Level-1-260C-UNLIM CU NIPDAU Level-1-260C-UNLIM CU NIPDAU Level-1-260C-UNLIM CU NIPDAU Level-1-260C-UNLIM

Addendum-Page 1

PACKAGE OPTION ADDENDUM

www.ti.com

5-Sep-2011

Orderable Device TLE2027IP TLE2027MD TLE2027MDG4 TLE2027MFKB TLE2027MJG TLE2027MJGB TLE2037ACD TLE2037ACP TLE2037AID TLE2037AIP TLE2037AMD TLE2037AMDG4 TLE2037AMJGB TLE2037CD TLE2037CDG4 TLE2037CDR TLE2037CDRG4 TLE2037CP TLE2037ID TLE2037IDG4 TLE2037IDR TLE2037IDRG4 TLE2037IP TLE2037MD

Status

(1)

Package Type Package Drawing PDIP SOIC SOIC LCCC CDIP CDIP SOIC PDIP SOIC PDIP SOIC SOIC CDIP SOIC SOIC SOIC SOIC PDIP SOIC SOIC SOIC SOIC PDIP SOIC P D D FK JG JG D P D P D D JG D D D D P D D D D P D

Pins 8 8 8 20 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8

Package Qty

Eco Plan TBD

(2)

Lead/ Ball Finish Call TI

MSL Peak Temp Call TI

(3)

Samples (Requires Login)

OBSOLETE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE OBSOLETE OBSOLETE OBSOLETE OBSOLETE ACTIVE ACTIVE OBSOLETE ACTIVE ACTIVE ACTIVE ACTIVE OBSOLETE ACTIVE ACTIVE ACTIVE ACTIVE OBSOLETE ACTIVE

75 75 1 1 1

TBD Green (RoHS & no Sb/Br) TBD TBD TBD TBD TBD TBD TBD

CU NIPDAU Level-1-220C-UNLIM CU NIPDAU Level-1-260C-UNLIM POST-PLATE N / A for Pkg Type A42 A42 Call TI Call TI Call TI Call TI N / A for Pkg Type N / A for Pkg Type Call TI Call TI Call TI Call TI

75 75

TBD Green (RoHS & no Sb/Br) TBD Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) TBD Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) TBD TBD

CU NIPDAU Level-1-220C-UNLIM CU NIPDAU Level-1-260C-UNLIM Call TI Call TI

75 75 2500 2500

CU NIPDAU Level-1-260C-UNLIM CU NIPDAU Level-1-260C-UNLIM CU NIPDAU Level-1-260C-UNLIM CU NIPDAU Level-1-260C-UNLIM Call TI Call TI

75 75 2500 2500

CU NIPDAU Level-1-260C-UNLIM CU NIPDAU Level-1-260C-UNLIM CU NIPDAU Level-1-260C-UNLIM CU NIPDAU Level-1-260C-UNLIM Call TI Call TI

75

CU NIPDAU Level-1-220C-UNLIM

Addendum-Page 2

PACKAGE OPTION ADDENDUM

www.ti.com

5-Sep-2011

Orderable Device TLE2037MDG4 TLE2037MFKB TLE2037MJGB


(1)

Status

(1)

Package Type Package Drawing SOIC LCCC CDIP D FK JG

Pins 8 20 8

Package Qty 75

Eco Plan

(2)

Lead/ Ball Finish

MSL Peak Temp

(3)

Samples (Requires Login)

ACTIVE OBSOLETE OBSOLETE

Green (RoHS & no Sb/Br) TBD TBD

CU NIPDAU Level-1-260C-UNLIM Call TI Call TI Call TI Call TI

The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device.
(2)

Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)

MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.

Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. OTHER QUALIFIED VERSIONS OF TLE2027, TLE2027A, TLE2027AM, TLE2027M, TLE2037, TLE2037A :

Catalog: TLE2027A, TLE2027 Automotive: TLE2037-Q1, TLE2037A-Q1 Enhanced Product: TLE2027-EP, TLE2027-EP
Addendum-Page 3

PACKAGE OPTION ADDENDUM

www.ti.com

5-Sep-2011

Military: TLE2027M, TLE2027AM


NOTE: Qualified Version Definitions:

Catalog - TI's standard catalog product Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects Enhanced Product - Supports Defense, Aerospace and Medical Applications Military - QML certified for Military and Defense Applications

Addendum-Page 4

PACKAGE MATERIALS INFORMATION


www.ti.com 23-Sep-2010

TAPE AND REEL INFORMATION

*All dimensions are nominal

Device

Package Package Pins Type Drawing SOIC SOIC SOIC SOIC D D D D 8 8 8 8

SPQ

Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) 330.0 330.0 330.0 330.0 12.4 12.4 12.4 12.4 6.4 6.4 6.4 6.4

B0 (mm) 5.2 5.2 5.2 5.2

K0 (mm) 2.1 2.1 2.1 2.1

P1 (mm) 8.0 8.0 8.0 8.0

W Pin1 (mm) Quadrant 12.0 12.0 12.0 12.0 Q1 Q1 Q1 Q1

TLE2027CDR TLE2027IDR TLE2037CDR TLE2037IDR

2500 2500 2500 2500

Pack Materials-Page 1

PACKAGE MATERIALS INFORMATION


www.ti.com 23-Sep-2010

*All dimensions are nominal

Device TLE2027CDR TLE2027IDR TLE2037CDR TLE2037IDR

Package Type SOIC SOIC SOIC SOIC

Package Drawing D D D D

Pins 8 8 8 8

SPQ 2500 2500 2500 2500

Length (mm) 340.5 340.5 340.5 340.5

Width (mm) 338.1 338.1 338.1 338.1

Height (mm) 20.6 20.6 20.6 20.6

Pack Materials-Page 2

MECHANICAL DATA
MCER001A JANUARY 1995 REVISED JANUARY 1997

JG (R-GDIP-T8)
0.400 (10,16) 0.355 (9,00) 8 5

CERAMIC DUAL-IN-LINE

0.280 (7,11) 0.245 (6,22)

4 0.065 (1,65) 0.045 (1,14)

0.063 (1,60) 0.015 (0,38)

0.020 (0,51) MIN

0.310 (7,87) 0.290 (7,37)

0.200 (5,08) MAX Seating Plane 0.130 (3,30) MIN

0.023 (0,58) 0.015 (0,38) 0.100 (2,54) 0.014 (0,36) 0.008 (0,20)

015

4040107/C 08/96 NOTES: A. B. C. D. E. All linear dimensions are in inches (millimeters). This drawing is subject to change without notice. This package can be hermetically sealed with a ceramic lid using glass frit. Index point is provided on cap for terminal identification. Falls within MIL STD 1835 GDIP1-T8

POST OFFICE BOX 655303

DALLAS, TEXAS 75265

IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TIs terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TIs standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Audio Amplifiers Data Converters DLP Products DSP Clocks and Timers Interface Logic Power Mgmt Microcontrollers RFID OMAP Mobile Processors Wireless Connctivity www.ti.com/audio amplifier.ti.com dataconverter.ti.com www.dlp.com dsp.ti.com www.ti.com/clocks interface.ti.com logic.ti.com power.ti.com microcontroller.ti.com www.ti-rfid.com www.ti.com/omap www.ti.com/wirelessconnectivity TI E2E Community Home Page e2e.ti.com Applications Communications and Telecom www.ti.com/communications Computers and Peripherals Consumer Electronics Energy and Lighting Industrial Medical Security Space, Avionics and Defense Video and Imaging www.ti.com/computers www.ti.com/consumer-apps www.ti.com/energy www.ti.com/industrial www.ti.com/medical www.ti.com/security www.ti.com/space-avionics-defense www.ti.com/video

Transportation and Automotive www.ti.com/automotive

Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright 2011, Texas Instruments Incorporated

Potrebbero piacerti anche