Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
NO 10
AIM: To obtain 2D multi-view drawings from the 3D object using Auto CAD Software. PROCEDURE: Command: vpoint Specify a view point or [Rotate] <display compass and tripod>: 1,-1,1 Regenerating model. Command: shademode Enter an option [2dwireframe/3dwireframe/3dHidden/Realistic/Conceptual/Other] <2dwireframe>: 3d Command: ZOOM Specify corner of window, enter a scale factor (nX or nXP), or [All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>: all Regenerating model. <Ortho on> Command: line Specify first point: Specify next point or [Undo]: 192 Specify next point or [Undo]: 72 Specify next point or [Undo]: 6 Specify next point or [Close/Undo]: @18,-24 Specify next point or [Close/Undo]: 6 Specify next point or [Close/Undo]: 12 Specify next point or [Close/Undo]: 6
Prepared by: N.Karthick, Asst. Professor, Dept. of Mechanical Engg, Veltech Hightech Dr.RR Dr.SR Engg College
Specify next point or [Close/Undo]: @18,24 Specify next point or [Close/Undo]: 6 Specify next point or [Close/Undo]: 48 Specify next point or [Close/Undo]: 132 Specify next point or [Close/Undo]: c Command: region Select objects: Specify opposite corner: 12 found, 12 total Select objects: 1 loop extracted. 1 Region created. Command: extrude Current wire frame density: ISOLINES=4 Select objects to extrude: 1 found Select objects to extrude: Specify height of extrusion or [Direction/Path/Taper angle]: 96
Command: line Specify first point: Specify next point or [Undo]: 36 Specify next point or [Undo]: 48 Specify next point or [Close/Undo]: 48 Command: line Specify first point: Specify next point or [Undo]: 96 Command: OFFSET
Prepared by: N.Karthick, Asst. Professor, Dept. of Mechanical Engg, Veltech Hightech Dr.RR Dr.SR Engg College
Current settings: Erase source=No Layer=Source OFFSETGAPTYPE=0 Specify offset distance or [Through/Erase/Layer] <24.0000>: Specify point on side to offset or [Exit/Multiple/Undo] <Exit>:
Command: OFFSET Current settings: Erase source=No Layer=Source OFFSETGAPTYPE=0 Specify offset distance or [Through/Erase/Layer] <24.0000>: 12 Select object to offset or [Exit/Undo] <Exit>: Specify point on side to offset or [Exit/Multiple/Undo] <Exit>:
Command: arc Specify start point of arc or [Center]: C Specify center point of arc: Specify start point of arc: Similarly draw the four arcs.
Command: REGION Select objects: 4 total Select objects: 1 loop extracted. 1 Region created. Command: subtract Select solids and regions to subtract from .. Select objects: 1 found Select objects:
Prepared by: N.Karthick, Asst. Professor, Dept. of Mechanical Engg, Veltech Hightech Dr.RR Dr.SR Engg College
Select solids and regions to subtract .. Select objects: 1 found Select objects: Command: EXTRUDE Current wire frame density: ISOLINES=4 Select objects to extrude: 1 found Select objects to extrude: Specify height of extrusion or [Direction/Path/Taper angle] <96.0000>: 8 Command: line Specify first point: Specify next point or [Undo]: Command: _line Specify first point: Specify next point or [Undo]: Command: ARC Specify start point of arc or [Center]: C Specify center point of arc: Specify start point of arc: Specify end point of arc or [Angle/chord Length]: Similarly draw another arc. Command: REGION Select objects: 4 total Select objects: 1 loop extracted. 1 Region created. Command: EXTRUDE
Prepared by: N.Karthick, Asst. Professor, Dept. of Mechanical Engg, Veltech Hightech Dr.RR Dr.SR Engg College
Current wire frame density: ISOLINES=4 Select objects to extrude: 1 found Select objects to extrude: Specify height of extrusion or [Direction/Path/Taper angle] <8.0000>: -24 Command: _subtract Select solids and regions to subtract from .. Command: union Select objects: Select objects: 2 total Command: subtract Select solids and regions to subtract from .. Select objects: 1 found Select objects: Select solids and regions to subtract .. Select objects: 1 found
To Extract 2D view from the above created 3D object, change into required view and use the command: FLATSHOT
RESULT: Thus, 2D multi-view drawings were obtained from the 3D object using Auto CAD Software.
Prepared by: N.Karthick, Asst. Professor, Dept. of Mechanical Engg, Veltech Hightech Dr.RR Dr.SR Engg College