Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
PRODUCT DESCRIPTION
BASIC USE QUIKRETE Rapid-Hardening Sand Mix is a fast-setting, rapid-hardening mortar designed to repair holes in concrete highways, bridge decks, concrete parking lots, and other con-crete floor repair. In most cases, pedestrian traffic can be resumed from 1 to 2 hours after patching. COMPOSITION & MATERIALS QUIKRETE Rapid-Hardening Sand Mix is a Portland cement-based compound with specially graded aggregates to provide a permanent patch. COLORS ement gray C SIZE 0 lb (22.7 kg) bags 5 YIELD A 50 lb (22.7 kg) bag of QUIKRETE Rapid-Hardening Sand Mix will yield 0.40 cu ft (11 L) of material. Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens) STM C157/C157M Standard Test Method for Length A Change of Hardened Hydraulic-Cement, Mortar, and Concrete STM C191 Standard Test Method for Time of Setting of A Hydraulic Cement by Vicat Needle STM C531 Standard Test Method for Linear Shrinkage A and Coefficient of Thermal Expansion of ChemicalResistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes STM C642 Standard Test Method for Density, A Absorption, and Voids in Hardened Concrete STM C666 Standard Test Method for Resistance of A Concrete to Rapid Freezing and Thawing STM C672/C672M Standard Test Method for Scaling A Resistance of Concrete Surfaces Exposed to Deicing Chemicals STM C882 Standard Test Method for Bond Strength of A Epoxy-Resin Systems Used With Concrete By Slant Shear STM C928 Standard Specification for Packaged, A Dry, Rapid-Hardening Cementitious Materials for Concrete Repairs PHYSICAL/CHEMICAL PROPERTIES QUIKRETE Rapid-Hardening Sand Mix, when tested in accordance with ASTM procedures, provides results as listed in Table 1. QUIKRETE Rapid-Hardening Sand Mix meets the
TECHNICAL DATA
APPLICABLE STANDARDS ASTM International STM C39 Standard Test Method for Compressive A Strength of Cylindrical Concrete Specimens STM C78 Standard Test Method for Flexural Strength of A Concrete (Using Simple Beam with Third-Point Loading) STM C109/C109M Standard Test Method for A
90
INSTALLATION
PREPARATORY WORK emove all spoiled areas and areas of unsound concrete R and patching he hole should have a vertical edge of 1/2 (12.7 mm) or T more, formed by use of a pneumatic jackhammer or sawing. oles should be chipped out to create a new, H sound substrate fter the chipping process is completed, the repair A area must be cleaned by water blasting or other suitable method ampen holes with clean water before patching. No D puddles of water should be left in the hole
TABLE 2 PRODUCT EXTENSION Product extended with 50% by weight minus 1/2" (12.7mm) coarse aggregate Flexural strength, ASTM C78 4 hrs 3 days Compressive strength, ASTM C39 1 hr 3 hrs 24 hrs 125 psi (1.9 MPa) 520 psi (3.6 MPa) 710 psi (4.9 MPa) 780 psi (5.4 MPa) 3420 psi (23.6 MPa)
AVAILABILITY
MIxING se 3/4 gal (2.8 L) of water per 50 lb (22.7) bag or 1 gal U (3.8 L) of water per 67 lb (30.4 kg) bag ll tools and equipment used in the mixing and finishing A process should be clean lace water in mixer. While mixer is running, add contents P of bag. Mix 4 to 5 minutes. The mix will appear stiffer than normal concrete lace in a wheelbarrow or other transporting vehicle. P Note - The mixture should be placed immediately after the mixing is completed. Working time is 20 - 30 minutes at 73 degrees F (23 degrees C). Setting time will be shorter in hot weather and longer in cold weather. PLACING he hole should be filled by placing material full depth, T from one end to the other to eliminate part depth lifts between batches
QUIKRETE Rapid-Hardening Sand Mix is available at leading concrete construction supply houses and distributors.
WARRANTY
The QUIKRETE Companies warrant this product to be of merchantable quality when used or applied in accordance with the instructions herein. The product is not warranted as suitable for any purpose other than the general purpose for which it is intended. Liability under this warranty is limited to the replacement of the product, as purchased, found to be defective, or at the shipping companies option, to refund the purchase price. In the event of a claim under this warranty, notice must be given to The QUIKRETE Companies in writing. This limited warranty is issued and accepted in lieu of all other express warranties and expressly excludes liability for consequential damages.
MAINTENANCE
None required.
91