Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Huawei Technologies Co., Ltd. provides customers with comprehensive technical support and service. For any assistance, ple
http://www.huawei.com support@huawei.com
No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huaw
nd service. For any assistance, please contact our local office or company headquarters.
respective holders.
Purpose
This document provides information about the BSC6900 parameters, including the meaning, value, and usage of the
Intended Audience
Network planners Field engineers System engineers Shift operators
Organization
Each parameter is described in the following aspects. Description Parameter ID Parameter Name NE MML Command Meaning Feature ID Feature Name Value Type GUI Value Range Actual Value Range Unit Default Value Recommended Value Impact Parameter Relationship Access Service Interrupted After Modification Interruption Scope Interruption Duration (min) Caution
6900 parameters, including the meaning, value, and usage of the parameters.
ts. Remarks Simple string for identifying a parameter Full name of the parameter NEs on which the parameter is set Commands for setting the parameter, and optional/mandatory attribute of the parameter in each command Functions, functioning ways, and protocols of the parameter Relevant feature ID Features using the parameter Parameter value type Parameter value range displayed on the GUI Actual parameter value range corresponding to the GUI Value Range. For example, the GUI Value Range is 0, and the corresponding Actual Value Range is OFF. Parameter value unit Initial value provided by the system Values recommended in different scenarios Parameter impact scope, that is, objects specified when the parameter is set Relationship between this parameter and other parameters. For example, to use this parameter, you need to set related switches and parameters. Whether this parameter is read/write or read only Whether modifying the parameter value may interrupt the existing services Possible interruption scope in the case that modifying the parameter value may interrupt the existing services Possible interruption duration in the case that modifying the parameter value may interrupt the existing services Cautions to be taken during the modification
Requirements on how to validate the modification of the parameter. For example, you may need to reset the device to validate the modification. Impact of the radio parameter on the network performance Version in which this parameter is introduced Whether this parameter is a radio parameter, a transport parameter, or an equipment parameter
Parameter ID
Parameter Name
NE
MaccPageRepeatTimes
AAL2PATHT
BSC6900
AbsTime
Specify Time
BSC6900
Ac09ToAsc
Ac10ToAsc
Ac11ToAsc
Ac12ToAsc
Ac13ToAsc
Ac14ToAsc
Ac15ToAsc
AccessServiceClass
ACCTHD
AC control threshold
BSC6900
ACCTHD
BSC6900
ACFC
BSC6900
AcIntervalOfCell
AC Restriction Interval Of Cell BSC6900 Access Class Restriction interval between Cells BSC6900
AcIntervalOfCells
AcRange
AcRange
BSC6900
AcRestriction
AcRstrctIntervalLen
BSC6900
AcRstrctIntervalLen
AC Restriction Interval length BSC6900 Interval length of Domain Specific Access Class Restriction
AcRstrctIntervalLen
BSC6900
AcRstrctPercent
AcRstrctSwitch
ACRTHD
AC restore threshold
BSC6900
ACRTHD
AC restore threshold
BSC6900
ACSW
AC control switch
BSC6900
AFSetObj
AFSetObj
BSC6900
AgpsActivateFlag
AGPSMethodType
AGPSRECEIVERID
GPS ID
BSC6900
AGPSRECEIVERTYPE
GPS type
BSC6900
AICHPowerOffset
BSC6900
AICHTxTiming
BSC6900
AID
Alarm ID
BSC6900
AID
Alarm ID
BSC6900
AID
Alarm ID
BSC6900
AID
Alarm ID
BSC6900
AID
Alarm ID
BSC6900
AIDST
BSC6900
AlignMode
align type
BSC6900
AllBw
Bandwidth
BSC6900
AllocCodeMode
ALMTP
Alarm Type
BSC6900
ALTITUDE
BSC6900
ALTITUDEIMP
BSC6900
ALVL
ALVL
AmntOfRpt2B
AmntOfRpt2C
AmntOfRpt3A
AmntOfRpt3C
3C event retry max times BSC6900 RLC AM mode parameters selection BSC6900 QOS Switch For AMR Traffic
AmRlcCfgPara
AMRQosPerform
BSC6900
Threshold of AmrRabAbnormRelRatio AMR Call Drop Thd Ratio[%] BSC6900 Minimum Number of AMR RAB Establish AmrRabEstabAttMinNum Request of BSC6900 Threshold AMR RAB Setup AmrRabEstabSuccRatioT Successful hd Ratio[%] Minimum Number of AMR Call Release
BSC6900
AmrRabRelMinNum
BSC6900
AmrUlRateAdjTimerLen
ANI
ANI
ANI
ANI
ANM
Alarm Name
BSC6900
AntennaAltitudeMeter
BSC6900
BSC6900
AntennaLatitudeDegree
Cell Antenna AntennaLatitudeDegreeS Latitude[secon ec d] BSC6900 Cell Antenna Longitude[0.00 AntennaLongitudeDegree 0001degree] BSC6900 Cell Antenna AntennaLongitudeDegree Longitude[seco Sec nd] BSC6900 Cell Antenna Opening[0.1de gree] BSC6900
AntennaOpening
AntennaOrientation
ANTIERRFLAG
APFlag
APFlag
BSC6900
APP
Application type
BSC6900
AppliedDirect
BSC6900
AREAFLAG
Area flag
BSC6900
AREAFLAG
Area flag
BSC6900
ARP10Priority
User_priority of Allocation/Rete ntion priority 10 BSC6900 User_priority of Allocation/Rete ntion priority 11 BSC6900 User_priority of Allocation/Rete ntion priority 12 BSC6900 User_priority of Allocation/Rete ntion priority 13 BSC6900 User_priority of Allocation/Rete ntion priority 14 BSC6900
ARP11Priority
ARP12Priority
ARP13Priority
ARP14Priority
ARP1Priority
User_priority of Allocation/Rete ntion priority 1 BSC6900 User_priority of Allocation/Rete ntion priority 2 BSC6900 User_priority of Allocation/Rete ntion priority 3 BSC6900 User_priority of Allocation/Rete ntion priority 4 BSC6900 User_priority of Allocation/Rete ntion priority 5 BSC6900 User_priority of Allocation/Rete ntion priority 6 BSC6900 User_priority of Allocation/Rete ntion priority 7 BSC6900 User_priority of Allocation/Rete ntion priority 8 BSC6900 User_priority of Allocation/Rete ntion priority 9 BSC6900
ARP2Priority
ARP3Priority
ARP4Priority
ARP5Priority
ARP6Priority
ARP7Priority
ARP8Priority
ARP9Priority
ARPRETRY
BSC6900
ARPTIMEOUT
BSC6900
ASS
Event Type
BSC6900
ASS
Event Type
BSC6900
ATMSN
NodeB ATM_TRANS Slot No. BSC6900 NodeB ATM_TRANS Subrack No. BSC6900 Attach/detach allowed indication BSC6900
ATMSRN
ATT
AUSTOP
AUSTOP
AUTHMODE
AUTHMODE
AUTHMODE
AUTHNAME
BSC6900
AUTHNAME
BSC6900
AUTHPWD
Validate password
BSC6900
AUTHPWD
Validate password
BSC6900
AUTHTYPE
BSC6900
AUTHTYPE
BSC6900
AUTO
Auto negotiation
BSC6900
AUTOULKSW
BSC6900
AutoUnlockTime
BSC6900
AUTYPE
Available AvailablesignatureEndInd signature end ex index BSC6900 Available AvailablesignatureStartIn signature start dex index BSC6900 Available AvailableSubchannelCtrl subchannel Word control word
BSC6900
AvailCap
Capability of CN Node
BSC6900
AVOL
Alarm level
BSC6900
B1B2SDTHRD
BSC6900
B1B2SFTHRD
BSC6900
B3SDTHRD
BSC6900
B3SFTHRD
BSC6900
BACK8KCLKSW1
BSC6900
BACK8KCLKSW2
BSC6900
BackgroundNoise
Background noise
BSC6900
BackupPath
Backup Path
BSC6900
BACKUPPATH
BAKIP
BAKMASK
BSC6900
BandInd
BandInd
BandInd
BandWidthForFACH
Bandwidth of Fach
BSC6900
BCC
BcchArfcn
BcchHspdschPower
BcchHsscchPower
BSC6900
BCHPower
BSC6900
BEARTYPE
BearType
Bear Type
BSC6900
BeatDectThred
HeatBeat Lost Times Threshold BSC6900 HeatBeat Recover Times Threshold BSC6900
BeatRecvrThred
BeatSendingDis
HeatBeat Sending Time Interval BSC6900 BE service handover rate threshold[kbit/s ] BSC6900
BeBitRateThd
BE CPC to E_FACH BeCpc2EFachStateTrans Transition Timer Timer[s] BE CPC to FACH BeCpc2FStateTransTime Transition r Timer[s] BE DCH to E_FACH BeD2EFachStateTransTi Transition mer Timer[s] BE DCH to FACH Transition Timer[s]
BSC6900
BSC6900
BSC6900
BeD2FStateTransTimer
BSC6900
BeDlAct1
First Action For BE Downlink QOS BSC6900 Second Action For BE Downlink QOS BSC6900 Third Action For BE Downlink QOS BSC6900 BE E-DCH To FACH State Transition Timer[s] BSC6900 BE E_FACH2CPC 4A Threshold[byte ] BSC6900
BeDlAct2
BeDlAct3
BeE2FStateTransTimer
BeEFach2CpcTvmThd
BeEFach2DTvmThd
BE BeEFach2DTvmTimeToT E_FACH2D 4A rig Time[ms] BSC6900 BE E_FACH2HSDSCH 4A Threshold[byte BeEFach2HTvmThd ] BSC6900 BE E_FACH2HSBeEFach2HTvmTimeToT DSCH 4A rig Time[ms] BSC6900 BE F2CPC_EDCH 4A Threshold[byte ] BSC6900
BeF2CpcETvmThd
BeF2CpcHTvmThd
BSC6900
BeF2DTvmThd
BeF2DTvmTimeToTrig
BE F/R2D 4A Time[ms]
BSC6900
BeF2ETvmThd
BeF2ETvmTimeToTrig
BE F2E-DCH 4A Time[ms]
BSC6900
BeF2HTvmThd
BeF2HTvmTimeToTrig
BSC6900
BeF2PStateTransTimer
BSC6900
BeH2FStateTransTimer
BeH2FTvmPTAT
BSC6900
BeH2FTvmThd
BeH2FTvmTimeToTrig
BSC6900
Rate threshold of BE on 2ms TTI of BeHsupa2msTtiRateThs HSUPA[kbit/s] BSC6900 Timer For BE Inter Iur Rate[s]
BEInterIurRateUpTimer
BSC6900
BePwrMargin
BEQosPerform
BetaC
Reference BetaC
BSC6900
BetaD
Reference BetaD
BSC6900
BeUlAct1
First Action For BE Uplink QOS BSC6900 Second Action For BE Uplink QOS BSC6900 Third Action For BE Uplink QOS BSC6900 Indicator For BE Uplink QOS Event
BeUlAct2
BeUlAct3
BeUlEvTrigInd
BSC6900
BeUlQos5AMcSwitch
BeUlQos6A1McSwitch
BeUlQos6DMcSwitch
Measurement Of 6D Switch BSC6900 Wait Timer For BE Uplink Rate[ms] BSC6900 Detect multiplier of BFD packet Background MAC-c flow GBR
BeUlRateAdjTimerLen
BFDDETECTCOUNT
BSC6900
BGGBR
BSC6900
BGMBR
Background MAC-c flow MBR Background noise abnormal threshold Background noise update continuance Time Background noise update end time Equivalent user number threshold for background noise Background noise update start time
BSC6900
BgnAbnormalThd
BSC6900
BGNAdjustTimeLen
BSC6900
BgnEndTime
BSC6900
BGNEqUserNumThd
BSC6900
BgnStartTime
BSC6900
BGNSwitch
Auto-adaptive background noise update switch BSC6900 Background noise update trigger threshold
BgnUpdateThd
BSC6900
BLERQuality
BlindHoFlag
measurement report amount BlindHOIntrafreqMRAmo of blind unt handover Intrafrequency BSC6900 measurement report interval BlindHOIntrafreqMRInter of blind val HO[ms] BSC6900
BlindHOPrio
Blind handover BlindHOQualityCondition condition[dBm] BSC6900 1F event blind handover BlindHORSCP1FThresho trigger ld condition[dBm] BSC6900
BLKFILTERSW
BLKPRD
BSC6900
BLKSTATPRD
Observing time window of statistical alarm BSC6900 Switch of statistics blinking alarm BSC6900
BLKSTATSW
BLOREQTMR
BSC6900
BORROWDEVIP
BOXFLG
BRDCLASS
Board Class
BSC6900
BRDCLASS
Board Class
BSC6900
BRDCLASS
Board Class
BSC6900
BRDTYPE
Board Type
BSC6900
BRDTYPE
Board type.
BSC6900
BRDTYPE
Board type
BSC6900
BRDTYPE
Board type
BSC6900
BS
Backup Style
BSC6900
BSICVerify
BSC6900
BT
Board type
BSC6900
BT
Board type
BSC6900
BT
Board type
BSC6900
BT
Board type
BSC6900
BT
Board type
BSC6900
BT
Board type
BSC6900
BT
Board type
BSC6900
BT
Board Type
BSC6900
BT
Board type
BSC6900
BT
Board Type
BSC6900
BT
Board type
BSC6900
BT
Board Type
BSC6900
BUNDLINGFLAG
Bundling Flag BSC6900 Auto adjust bandwidth switch Backward congestion remain bandwidth Backward congestion clear remain bandwidth Backward congestion clear remain ratio
BWADJ
BSC6900
BWDCONGBW
BSC6900
BWDCONGCLRBW
BSC6900
BWDCONGCLRTH
BSC6900
BWDCONGTH
BSC6900
overload congestion clear remain BWDOVLDCLRRSVBW bandwidth Backward overload congestion clear remain ratio Backward overload congestion remain bandwidth Backward overload congestion remain ratio
BSC6900
BWDOVLDCLRTH
BSC6900
BWDOVLDRSVBW
BSC6900
BWDOVLDTH
BSC6900
BWDRESVHOTH
BWDRSVHOBW
BSC6900
BWMAXRATIO
BWMODE
BSC6900
BWRTPTH
BSC6900
CacSwitch
CallShockCtrlSwitch
CallShockJudgePeriod
Call Shock Judge Period time length Indicator of Carrier Type Priority
BSC6900
CarrierTypePriorInd
BSC6900
CARRYF
BSC6900
CARRYFLAG
Carry Flag Bearing FRAATM link No. Bearing FRAATM link No. Bearing FRAATM link No.
BSC6900
CARRYFRAATMLNKN
BSC6900
CARRYFRAATMLNKN
BSC6900
CARRYFRAATMLNKN
BSC6900
CARRYFRAATMLNKN
BSC6900
CARRYIMAGRPN
BSC6900
CARRYIMAGRPN
BSC6900
CARRYIMAGRPN
BSC6900
CARRYIMAGRPN
CARRYLNKT
Bearing link type Bearing NCOPT port No. Bearing NCOPT port No. Bearing NCOPT port No.
BSC6900
CARRYNCOPTN
BSC6900
CARRYNCOPTN
BSC6900
CARRYNCOPTN
BSC6900
CARRYPN
BSC6900
CARRYSN
BSC6900
CARRYSN
BSC6900
CARRYSRN
BSC6900
CARRYT
Bearing type
BSC6900
CARRYT
Bearing type
BSC6900
CARRYT
BSC6900
CARRYT
BSC6900
CARRYT
BSC6900
CARRYT
CARRYUNILNKN
BSC6900
CARRYUNILNKN
BSC6900
CARRYUNILNKN
BSC6900
CARRYUNILNKN
BSC6900
CARRYVCI
Bearing VCI
BSC6900
CARRYVCI
Bearing VCI
BSC6900
CARRYVPI
Bearing VPI
BSC6900
CARRYVPI
Bearing VPI
BSC6900
CARRYVPN
BSC6900
CARRYVPN
BSC6900
CARRYVPN
BSC6900
CBCIPADDR
BSC6900
CBCMASK
Subnet mask
BSC6900
CBS
CBSCTHD
BSC6900
CBSCTHD
BSC6900
CBSOpIndex
CBSRTHD
BSC6900
CBSRTHD
BSC6900
CBSSAC
CBS SAC
BSC6900
CBSSAC
CBS SAC
BSC6900
CBSSW
CBSwitch
CB Switch
BSC6900
CCAEnableSta
CCCHGBR
CCCHMBR
CCCH MAC-c flow MBR BSC6900 Common channel primary path Common channel pri path load threshold Common channel secondary path
CCHPRIPATH
BSC6900
CCHPRITH
BSC6900
CCHSECPATH
BSC6900
CCHSECWHT
CCMINTERVAL
BSC6900
CCTMR
Timer_CC Cell delay variation tolerance AMR_RRC Number per Second for Cell
BSC6900
CDVT
BSC6900
CellAmrRrcNum
BSC6900
CellAverageHeight
BSC6900
CellAverageHeightImp
BSC6900
CellCapContainerFdd
CellCenterAltitude
BSC6900
CellCenterAltitudeImp
BSC6900
CellCenterLatitude
Cell Center Latitude[0.000 001degree] BSC6900 Cell Center Latitude[secon d] BSC6900 Cell Center Longitude[0.00 0001degree] BSC6900
CellCenterLatitudeSec
CellCenterLongitude
CellChoice
BSC6900
CellEnvironment
BSC6900
CellEnvType
Cell environment type Cell Altitude Standard Deviation[m] Cell Altitude Standard Deviation[ft] HiPri_RRC Number per Second for Cell
BSC6900
CellHeightStd
BSC6900
CellHeightStdImp
BSC6900
CellHighPriRrcNum
BSC6900
CellHostType
CellId
Cell ID
BSC6900
CellId
Cell ID
BSC6900
CellId
Cell ID
BSC6900
CellId
Cell ID
BSC6900
CellId
Cell ID
BSC6900
CellId
BSC6900
CellId
BSC6900
CellId
BSC6900
CellIDChgPeriod
BSC6900
CellIDChgSwitch
BSC6900
CellidRttActivateFlag
BSC6900
CellLdrSfResThd
BSC6900
CellLocCfgType
BSC6900
CellName
Cell name
BSC6900
CellOverrunThd
Cell overload threshold Cell Reselection Counter Threshold Cell Reselection Timer[s]
BSC6900
CellReSelectCounter
BSC6900
CellReSelectTimer
BSC6900
BSC6900
BSC6900
CellsForbidden1A
BSC6900
CellsForbidden1B
BSC6900
CellTotalRrcNumThd
CellUnderrunThd
Cell under load threshold BSC6900 Cell URA update control threshold BSC6900 Cell URA update control threshold BSC6900 Cell URA update restore threshold BSC6900 Cell URA update restore threshold BSC6900 Cell URA update flow control switch BSC6900 Certificate Chain File Name RAC Configuration Indication
CELLURACTHD
CELLURACTHD
CELLURARTHD
CELLURARTHD
CELLURASW
CertChain
BSC6900
CfgRacInd
BSC6900
CfgRacInd
BSC6900
CfgSwitch
CFM
Confirm Password
BSC6900
CG
Command Group
BSC6900
CG
Command Group
BSC6900
CGN
BSC6900
Channel Retry ChannelRetryHoTimerLe Ho Timer n Length[s] BSC6900 Channel Retry Timer Length[s] BSC6900
ChannelRetryTimerLen
ChCodingType
CHECKCOUNT
BSC6900
ChIdx
CHKN
Check Index
BSC6900
CHKN
Check Index Calculate checksum when receive message Calculate checksum when send message
BSC6900
CHKSUMRX
BSC6900
CHKSUMTX
BSC6900
CHKSUMTYPE
Checksum arithmetic
BSC6900
CHKTYPE
Check type
BSC6900
Time unit for ChoiceRprtUnitForDlBasi DL basic meas cMeas rprt cycle BSC6900 Time unit for ChoiceRprtUnitForDlOlc DL OLC meas Meas rprt cycle BSC6900 Time unit of HSDPA need ChoiceRprtUnitForHsdpa pwr meas PwrMeas cycle
BSC6900
Time unit of ChoiceRprtUnitForHsdpa HSDPA bit rate RateMeas meas cycle BSC6900 Time unit of ChoiceRprtUnitForHsupa HSUPA bit rate RateMeas meas cycle BSC6900 Time unit for ChoiceRprtUnitForUlBasi UL basic meas cMeas rprt cycle BSC6900 Time unit for ChoiceRprtUnitForUlOlc UL OLC meas Meas rprt cycle BSC6900
ChoiceRptUnitForAmrE
AMR Reporting Period Unit For Event E BSC6900 BE Reporting Period Unit For Event E BSC6900 BE Reporting Period Unit For Event F BSC6900 VP Reporting Period Unit For Event E BSC6900
ChoiceRptUnitForBeE
ChoiceRptUnitForBeF
ChoiceRptUnitForVpE
ChSwitch
Channel Switch
BSC6900
CID
GSM cell ID
BSC6900
CIO
CIO
Cell Individual Offset[dB] BSC6900 Cell oriented Cell Individual Offset[0.5dB] BSC6900 Neighboring cell oriented CIO[dB] Neighboring cell oriented CIO[dB]
CIO
CIOOffset
BSC6900
CIOOffset
BSC6900
CIR
Bandwidth [64kbps]
BSC6900
CLEARTHD
BSC6900
CLKTYPE
BSC6900
CLRFLG
Alarm Cleared Flag BSC6900 Closed loop time adjust mode indication Compression mode capability
CLTAModeInd
BSC6900
CmCap
BSC6900
CmcfCellType
BSC6900
CmcfSwitch
BSC6900
CmchRsrcRspTmr
CMD
Command Name
BSC6900
CMD
Command Name
BSC6900
CMDSEQ
Command Sequence
BSC6900
CmpSwitch
Compatibility switch
BSC6900
CN
Cabinet No.
BSC6900
CNDomainId
CN domain ID BSC6900
CNDomainId
CN domain ID BSC6900
CNDomainId
CN domain ID BSC6900
CNId
CN node ID
BSC6900
CNLoadStatus
BSC6900
CNMNGMODE
BSC6900
CNOPERATORINDEX
CNOPERATORINDEX
Cn Operator Index
BSC6900
CnOperatorName
Cn Operator Name
BSC6900
CnOpGrpIndex
BSC6900
CnOpGrpIndex
BSC6900
CnOpGrpIndex
BSC6900
CnOpGrpName
BSC6900
CNOPINDEX
CN Operator index
BSC6900
CnOpIndex
Cn Operator Index
BSC6900
CnOpIndex
Cn Operator Index
BSC6900
CnOpIndex
CN Operator index
BSC6900
CNOPINDEX
CN operator index
BSC6900
CnOpIndex1
Operator 1 Index
BSC6900
CnOpIndex2
Operator 2 Index
BSC6900
CnOpIndex3
Operator 3 Index
BSC6900
CnOpIndex4
Operator 4 Index
BSC6900
CnOpIndexComm
CnOpNum
Operator Number
BSC6900
CNProtclVer
CN protocol version
BSC6900
CNT
Records to Return
BSC6900
CNTL
Counts Limit Upper count threshold of raised fault Lower count threshold of raised fault
BSC6900
CNTRISTHRD
BSC6900
CNTSTLTHRD
BSC6900
BSC6900
User Number for Code CodeAdjForHsdpaUserN Adjust for umThd HSDPA Code occupied BSC6900 rate threshold for code CodeBalancingDrdCode balancing RateThd drd[%] BSC6900 Code occupied rate threshold CodeBalancingDrdCode for code RateThd balance drd[%] BSC6900 Minimum SF threshold for CodeBalancingDrdMinSF code balance Thd drd Minimum SF threshold for CodeBalancingDrdMinSF code balance Thd drd
BSC6900
BSC6900
Code balance CodeBalancingDrdSwitch drd switch BSC6900 Code congestion CodeCongSelInterFreqH select interoInd freq indication BSC6900
CodeScheme
CodingRate
CoexistMeasThdChoice
BSC6900
BSC6900
CombNCellPercent
Combine Neighbour Cell Percent[%] BSC6900 Comb Event F Reporting Power Margin[0.1dB] BSC6900
CombPwrMargin
CommPlmnUsingType
BSC6900
Complicacy
Password Complexity
BSC6900
COMTMR1
Timer T1
BSC6900
COMTMR2
Timer T2
BSC6900
COMTMR3
Timer T3 Recover threshold of queue 0 [ms] Recover threshold of queue 1 [ms] Recover threshold of queue 2 [ms] Recover threshold of queue 3 [ms] Recover threshold of queue 4 [ms] Recover threshold of queue 5 [ms] Congestion threshold of queue 0 [ms] Congestion threshold of queue 1 [ms] Congestion threshold of queue 2 [ms] Congestion threshold of queue 3 [ms]
BSC6900
CONGCLRTHD0
BSC6900
CONGCLRTHD1
BSC6900
CONGCLRTHD2
BSC6900
CONGCLRTHD3
BSC6900
CONGCLRTHD4
BSC6900
CONGCLRTHD5
BSC6900
CONGTHD0
BSC6900
CONGTHD1
BSC6900
CONGTHD2
BSC6900
CONGTHD3
BSC6900
CONGTHD4
Congestion threshold of queue 4 [ms] Congestion threshold of queue 5 [ms] Cell barred indicator for SIB4
BSC6900
CONGTHD5
BSC6900
ConnCellBarred
BSC6900
BSC6900
Intra-freq cell ConnIntraFreqReselectio reselection ind n for SIB4 BSC6900 Connect power monitoring board BSC6900 Hysteresis 1 for connect mode[2dB] Hysteresis 2 for connect mode[2dB]
CONNPWR
ConnQhyst1s
BSC6900
ConnQhyst2s
BSC6900
ConnQoffset1sn
ConnQoffset2sn
ConnQoffset2s n[dB] Inter-freq cell BSC6900 reselection threshold for connect mode[2dB] Intra-freq cell reselection threshold for connect mode[2dB]
ConnSintersearch
BSC6900
ConnSintrasearch
BSC6900
ConnTbarred
BSC6900
CONNTYPE
Connection Type
BSC6900
Constantvalue
CONTPING
Continue ping or not BSC6900 Downlink MBR of Conversation[k bit/s] BSC6900 Uplink MBR of Conversation[k bit/s] BSC6900 Conversational MAC-c flow GBR BSC6900 Conversational MAC-c flow MBR BSC6900 Max Mode Of Narrowband AMRC For Copper Users BSC6900 Max Mode Of Wideband AMRC For Copper Users BSC6900
ConverDlMBR
ConverUlMBR
CONVGBR
CONVMBR
CopperMaxMode
CopperMaxMode
Count
BSC6900
CountCThreshold
Count-C threshold
BSC6900
CounterCheckSwitch
CP1SupInd
BSC6900
CP1SupInd
CP1 support indicator Call page control threshold Call page restore threshold CPUS traffic share threshold
BSC6900
CPAGECTHD
BSC6900
CPAGERTHD
BSC6900
CPUSShareThd
BSC6900
CqiDtxTimer
CQI Feedback CQIFbCkinInDTXDRXmo Cycke in DTXde DRX mode[ms] BSC6900 Certificate Revocation List File Name BSC6900 Certificate Revocation List File State BSC6900
CRL
CRLEnableSta
CRMaxNum
CROSSIPFLAG
BSC6900
CRRCCONNCCPUTHD
Call RRC conn share msg control CRRCCONNCMSGTHD threshold BSC6900 Call RRC conn share CPU restore threshold BSC6900
CRRCCONNRCPUTHD
Call RRC conn share msg restore CRRCCONNRMSGTHD threshold BSC6900 UMTS R99 CS conversational service downlink factor BSC6900 R99 CS conversational primary path BSC6900 R99 CS conversational pri path load threshold BSC6900 R99 CS conversational secondary path CS BSC6900 R99 conversational pri sec path load ratio threshold BSC6900 UMTS R99 CS conversational service uplink factor BSC6900
CSCONVDL
CSCONVPRIPATH
CSCONVPRITH
CSCONVSECPATH
CSCONVSECWHT
CSCONVUL
CsErlang
BSC6900
CSHOOut2GloadThd
BSC6900
CsInfoUpdFlag
CS Information Update Switch BSC6900 CS Information Update Protection Timer BSC6900 Feature Supporting Mode of CS Domain
CsInfoUpdTmr
CsNriCfgMode
BSC6900
CSNRILength
BSC6900
CsRestriction
CsRestriction
CSServiceHOSwitch
BSC6900
CSSTRMDL
UMTS R99 CS streaming service downlink factor BSC6900 R99 CS streaming primary path R99 CS streaming pri path load threshold R99 CS streaming secondary path
CSSTRMPRIPATH
BSC6900
CSSTRMPRITH
BSC6900
CSSTRMSECPATH
BSC6900
CSSTRMSECWHT
CSSTRMUL
CsSwitch
CS algorithm switch
BSC6900
CSVoiceChlType
BSC6900
CS Voice Hspa Dl Relative CSVoiceHspaDlRelDelay Delay[ms] BSC6900 CS Voice Hspa Ul Relative CSVoiceHspaUlRelDelay Delay[ms] BSC6900 HSUPA TTI type of CS voice traffic
CSVoiceHsupaTti
BSC6900
H2D procedure before reloc CSVoiceOverHspaSuppI when nd CsOverHspa BSC6900 Self-healing Switch for Ethernet Adapter Traffic Monitoring BSC6900 Calculated transport format combination
CSW
CTFC
BSC6900
CTFCSize
CTFCSize
CTHD
Critical threshold
BSC6900
CTHD
Critical threshold
BSC6900
Control plane sharing out CtrlPlnSharingOutOffset offset Control plane sharing out threshold
BSC6900
CtrlPlnSharingOutThd
BSC6900
CTRLSLOT
Slot No.
BSC6900
CTRLSW
CXT
Cross type
BSC6900
CZ
Classified Zone ID
BSC6900
D2F2PTvmThd
D2FTvmPTAT
BSC6900
D2FTvmTimeToTrig
BE D2F/R 4B Time[ms]
BSC6900
DATE
Date Limit
BSC6900
DATE
Date
BSC6900
Dccc1APenaltyTime
1A Rate Down Penalty Time Length[s] BSC6900 Period of penalty timer for SHO failure after down rate[s] BSC6900
DcccShoPenaltyTime
DcccStg
DCCC Strategy
BSC6900
DcccUpPenaltyLen
DCCC Rate Up Fail Penalty Time Length[s] BSC6900 DCH Throu Meas Period[10ms]
DchThrouMeasPeriod
BSC6900
Period Amount DchThrouPendingTime4 after trigger 4B B on DCH BSC6900 Period Amount DchThrouTimetoTrigger4 to trigger 4B B on DCH BSC6900
DefaultCnOp
Default CnOperator
BSC6900
DefaultConstantValue
DefPcpichEcNo
DELAY
BSC6900
Delay
BSC6900
DelayClass
Delay Class
BSC6900
DelayClass
Delay Class
BSC6900
BSC6900
DeltaQrxlevmin
BSC6900
DeltaQrxlevmin
BSC6900
DENO
BSC6900
DESC
Description
BSC6900
DESTIP
DESTIP
DESTIP
DESTMEPID
BSC6900
DEVIP
BSC6900
DEVTYPE
Device IP Address Type BSC6900 The Type of FTP Server Command Port BSC6900 DGPS data report period[min]
DFTPORTSWT
DGPSPERIOD
BSC6900
BSC6900
DHCPRLYID
DHCP Relay ID
BSC6900
DINM
DINW
Date in Week
BSC6900
DIR
Directory
BSC6900
Direction
DivCtrlField
BSC6900
BSC6900
DlAmrConvAF
DL AF of R99 AMR conv service BSC6900 AMR Trigger Time Of Event E[ms] BSC6900
DlAmrTrigTimeE
DlBackgroundAF
DL basic common DlBasicCommMeasFilter measure filter Coeff coeff BSC6900 DL rate of HSDPA BE traffic as H2D[kbit/s]
DlBeH2DInitialRate
BSC6900
DlBeTraffDecThs
DL BE traffic DCH decision threshold[kbit/s ] BSC6900 DL BE traffic DCH decision threshold[kbit/s ] BSC6900 DL BE traffic Initial bit rate[kbit/s]
DlBeTraffDecThs
DlBeTraffInitBitrate
BSC6900
DlBeTraffThsOnHsdpa
DL BE traffic threshold on HSDPA[kbit/s] BSC6900 BE Trigger Time Of Event E[ms] BSC6900 BE Trigger Time Of Event F[ms] BSC6900 DL CAC smoothing filter length BSC6900 DL common channel load reserved coefficient
DlBeTrigTimeE
DlBeTrigTimeF
DlCacAvgFilterLen
DlCCHLoadRsrvCoeff
BSC6900
DlCellTotalThd
DlCmMethod
BSC6900
DLCODENO
Reserved DL code No
BSC6900
DlConvAMRThd
DL threshold of Conv AMR service BSC6900 DL threshold of Conv non_AMR service BSC6900
DlConvNonAMRThd
DL CS should DlCSInterRatShouldBeH be HO user OUeNum number BSC6900 DL CS should DlCSInterRatShouldBeH be ho user OUeNum number BSC6900 DL CS should DlCSInterRatShouldNotH not be HO user OUeNum number BSC6900 DL CS should DlCSInterRatShouldNotH not be ho user OUeNum number BSC6900 Downlink Bit Rate Threshold For DCCC[kbit/s] BSC6900 Downlink Full Coverage Bit Rate[kbit/s]
DlDcccRateThd
DlFullCvrRate
BSC6900
DlGBR
Downlink GBR for BE service[kbit/s] BSC6900 DL handover credit and code reserved SF BSC6900
DlHoCeCodeResvSf
DlHOThd
BSC6900
DlHSUPARsvdFactor
Dl HSUPA reserved factor BSC6900 DL AF of R99 interactive service BSC6900 DL HO maximum bandwidth
DlInteractAF
DlInterFreqHoBWThd
BSC6900
BSC6900
DL LDR-AMR DlLdrAMRRateReduction rate reduction RabNum RAB number BSC6900 DL LDR smoothing filter length BSC6900
DlLdrAvgFilterLen
DL LDR-BE DlLdrBERateReductionR rate reduction abNum RAB number BSC6900 DL LDR-BE DlLdrBERateReductionR rate reduction abNum RAB number BSC6900 Dl LDR credit SF reserved threshold
DlLdrCreditSfResThd
BSC6900
DlLdrCreditSfResThd
DlLdrEighthAction
DlLdrFifthAction
BSC6900
DlLdrFifthAction
BSC6900
DlLdrFirstAction
BSC6900
DlLdrFirstAction
BSC6900
DlLdrFourthAction
DlLdrFourthAction
DlLdrNinthAction
BSC6900
DL LDR un-ctrl DlLdrPsRTQosRenegRa RT Qos rebNum nego RAB num BSC6900 DL LDR un-ctrl DlLdrPsRTQosRenegRa RT Qos rebNum nego RAB num BSC6900 DL LDR release threshold
DlLdrRelThd
BSC6900
DlLdrSecondAction
DlLdrSecondAction
DlLdrSeventhAction
DlLdrSixthAction
BSC6900
DlLdrSixthAction
DlLdrTenthAction
DlLdrThirdAction
BSC6900
DlLdrThirdAction
BSC6900
DlLdrTrigThd
DL LDR trigger threshold BSC6900 DL State Trans Hysteresis threshold BSC6900 Downlink Maximum Number of TFC
DlLdTrnsHysTime
DlMaxNumOfTfc
BSC6900
DlMBMSRsvdFactor
DL MBMS reserved factor BSC6900 DL TCP Measurement Filter Coefficient BSC6900 Downlink Mid Bit Rate Calculate Method
DlMeasFilterCoef
DlMidRateCalc
BSC6900
DlMidRateThd
DL Mode Change Waiting Timer DlModeChangeTimerLen Length[ms] BSC6900 DL Mode Change Waiting Timer DlModeChangeTimerLen Length[ms] BSC6900 DL AF of R99 non AMR conv service BSC6900 DL OLC smoothing filter length BSC6900
DlNonAmrConvAF
DlOlcAvgFilterLen
DL OLC fast TF restrict RAB DlOlcFTFRstrctRabNum number BSC6900 DL OLC fast TF restrict times
DlOlcFTFRstrctTimes
BSC6900
DlOlcMeasFilterCoeff
DL overload measure filter coeff BSC6900 DL OLC release threshold DL OLC traff release RAB number
DlOlcRelThd
BSC6900
DlOlcTraffRelRabNum
BSC6900
DlOlcTrigHyst
DlOlcTrigThd
DlOtherThd
DLOVSFSF
BSC6900
DL PS should DlPSInterRatShouldBeH be HO user OUeNum number BSC6900 DL PS should DlPSInterRatShouldBeH be ho user OUeNum number BSC6900 DL PS should DlPSInterRatShouldNotH not be HO user OUeNum number BSC6900 DL PS should DlPSInterRatShouldNotH not be ho user OUeNum number BSC6900 Switch Of AMR Downlink Rate Adjustment BSC6900
DlQosAmrAdjSwitch
InterFreq HO DlQosAmrInterFreqHoSw Switch For itch Downlink AMR BSC6900 InterRat HO DlQosAmrInterRatHoSwit Switch For ch Downlink AMR BSC6900 Down Link Qos Measure timer length[s] BSC6900
DLQosMcTimerLen
BSC6900
DlQosWAmrAdjSwitch
InterFreq HO Switch For DlQosWAmrInterFreqHo WAMR Switch Downlink InterRat HO Switch For DlQosWAmrInterRatHoS WAMR witch Downlink Switch Of DL R99 Congestion Control
BSC6900
BSC6900
DlR99CongCtrlSwitch
BSC6900
DlRateDnAdjLevel
Downlink Rate Decrease Adjust Level BSC6900 Downlink Rate Increase Adjust Level BSC6900 Down Link RSCP UsedFreq THD Hyst[dB] Downlink spreading factor
DlRateUpAdjLevel
DlRscpQosHyst
BSC6900
DlSF
BSC6900
DlSFLimitCMInd
DlSFTurnPoint
DL SF threshold
BSC6900
DlSrbActFactor
DL AF of SRB BSC6900 DL AF of R99 Streaming service BSC6900 DL streaming traffic threshold on HSDPA[kbit/s] BSC6900
DlStreamAF
DlStrThsOnHsdpa
DlThdE1
DL E1 Event Relative Threshold[0.1d B] BSC6900 DL E1 Event Relative Threshold[0.1d B] BSC6900 DL E2 Event Relative Threshold[0.1d B] BSC6900 DL E2 Event Relative Threshold[0.1d B] BSC6900 DL F1 Event Relative Threshold[0.1d B] BSC6900 DL F1 Event Relative Threshold[0.1d B] BSC6900 DL F2 Event Relative Threshold[0.1d B] BSC6900 DL F2 Event Relative Threshold[0.1d B] BSC6900 DL total equivalent user number BSC6900 VP Trigger Time Of Event E[ms] BSC6900 Expected diff delay guardband[cells]
DlThdE1
DlThdE2
DlThdE2
DlThdF1
DlThdF1
DlThdF2
DlThdF2
DlTotalEqUserNum
DlVpTrigTimeE
DLYGB
BSC6900
DomainType
BSC6900
Enable Door Status Alarm DOOR_ENGINE_MASK Reporting DSP code[Whole Number] DPCCH Transmission Burst 1[subframe] DPCCH Transmission Burst 2[subframe] prefered DPCCH slot format for HSPA DSP code[Divided Number] DPCH with MIMO priority Tx diversity mode
BSC6900
DPC
BSC6900
DpcchBurst1
BSC6900
DpcchBurst2
BSC6900
DpcchSlotFmtForHspa
BSC6900
DPCDNF
BSC6900
DpchDivModforMIMO
BSC6900
DpchDivModforMIMO
DPCH priority DpchPrioTxDiversityMod Tx diversity e mode BSC6900 DPCH priority DpchPrioTxDiversityMod Tx diversity e mode BSC6900
DpcMode
BSC6900
DPCT
DSP type
BSC6900
DPORTNO
BSC6900
DPUSN
DPX
DSP index
BSC6900
DPX
DPX Index
BSC6900
Dpx
BSC6900
DraSwitch
BSC6900
DRDEcN0Threshhold
BSC6900
DRDEcN0Threshhold
BSC6900
DrlAal2EstIndTmr
DRL AAL2 establishment indication timer[ms] BSC6900 DRL reconfiguration commit timer[ms] BSC6900 Max inter-RAT direct retry number BSC6900 Max inter-RAT direct retry number[times] BSC6900
DrlRecfgCmitTmr
DRMaxGSMNum
DRMaxGSMNum
DrncBeDlRlcQosSwitch
Drnc Parameter for BE Downlink RLC QOS BSC6900 Packet discard threshold of queue 0 [ms] BSC6900 Packet discard threshold of queue 1 [ms] BSC6900 Packet discard threshold of queue 2 [ms] BSC6900 Packet discard threshold of queue 3 [ms] BSC6900 Packet discard threshold of queue 4 [ms] BSC6900 Packet discard threshold of queue 5 [ms] BSC6900
DROPPKTTHD0
DROPPKTTHD1
DROPPKTTHD2
DROPPKTTHD3
DROPPKTTHD4
DROPPKTTHD5
DrSwitch
BSC6900
DrxCycle
DRX Cycle[subfram e] BSC6900 DRX cycle length coefficient Paging DRX cycle coefficient
DRXCycleLenCoef
BSC6900
DrxCycleLenCoef
BSC6900
DrxGrantMonitoring
Drxvalid
BSC6900
DS1
DS1
DsacAutoSwitch
DSCP
BSC6900
DSCP
DSCP
BSC6900
DSPN
DSP No.
BSC6900
DSPNO
Dsp No.
BSC6900
DST
DaylightSave
BSC6900
DSTIP
DSTMASK
DSTPORTNO
BSC6900
DSTTSMASK
Destination timeslot mask BSC6900 DPCCH Transmission Cycle 1[subframe] DPCCH Transmission Cycle 2[subframe] delay time of DTX_DRX in action
DtxCycle1
BSC6900
DtxCycle2
BSC6900
DtxDrxEnablingDelay
BSC6900
DtxLongPreamble
Dtxvalid
BSC6900
Length For Cell Dynamic DynCellOpenJudgeTimerl ShutDown en feature Timer Protect Length For Cell Dynamic DynCellShutdownProtect ShutDown Timerlen feature Cell Dynamic ShutDown Switch For DynCellShutDownSwitch RNC Cell Dynamic ShutDown Switch Cell Dynamic ShutDown Type
BSC6900
BSC6900
BSC6900
DynShutdownSwitch
BSC6900
DynShutDownType
BSC6900
E1T1PN
BSC6900
E1T1PN
E1/T1 port No. BSC6900 E-DCH Throu Meas Period[10ms] BSC6900 E-DCH2F 4B Pending Period Amount BSC6900 E-DCH2F 4B Threshold[kbit/ s] BSC6900
E2FThrouMeasPeriod
E2FThrouPTAT
E2FThrouThd
E2FThrouTimeToTrig
EagchCodeNum
ECHOIP
Check IP address
BSC6900
EcN0AdjStep
EcN0AdjTimerLen
EcN0EffectTime
EcN0EffectTime
EcN0MaxDownAdjStep
EcN0MaxUpAdjStep
EcN0Ths
Ec/N0 threshold[dB]
BSC6900
EcN0Ths
Ec/N0 threshold[dB]
BSC6900
ECSN
ED
End Date
BSC6900
ED
End Date
BSC6900
ED
End Date
BSC6900
EDAY
End date
BSC6900
EdchMacdPduSize1
E-DCH MAC-D PDU size1[bit] BSC6900 E-DCH MAC-D PDU size10[bit] BSC6900 E-DCH MAC-D PDU size11[bit] BSC6900
EdchMacdPduSize10
EdchMacdPduSize11
EdchMacdPduSize12
EdchMacdPduSize2
EdchMacdPduSize3
EdchMacdPduSize4
EdchMacdPduSize5
EdchMacdPduSize6
EdchMacdPduSize7
EdchMacdPduSize8
EdchMacdPduSize9
E-DCH MAC-D PDU size9[bit] BSC6900 The Number of E-DCH MAC-D PDU Size BSC6900 Period Amount after trigger 4A on EDCH BSC6900 Period Amount after trigger 4B on EDCH BSC6900
EdchMacdPduSizeNum
EdchPendingTime4A
EdchPendingTime4B
EdchRateAdjustSet
BSC6900
EdchSirMaxDownStep
Large Number of E-DCH PDU EdchTargetLargeRetrans retransfer[time Num s] BSC6900 Edch Little Target Number of E-DCH PDU EdchTargetLittleRetrans retransfer[time Num s] BSC6900 Period Amount to trigger 4A on EDCH BSC6900 Period Amount to trigger 4B on EDCH BSC6900
EdchTimetoTrigger4A
EdchTimetoTrigger4B
EdchTtiType
Edch TTI type BSC6900 UMTS EFACH channel forward factor BSC6900
EFACHDL
EFACHDTCHGBP
EFachSupInd
EFachSwitch
EM
EndType
BSC6900
EmcPreeRefVulnSwitch
EMERGENCY
Emergency verification
BSC6900
EmergLCSSwitch
BSC6900
EMITTHD
BSC6900
EMONTH
End month
BSC6900
EMSIP
BSC6900
ENCRYMODE
BSC6900
ENCRYMODE
EncryptionAlgo
Encryption algorithm
BSC6900
ENDAID
EndTime1
BSC6900
BSC6900
EndTime2
Second Cell Dynamic ShutDown Interval End Time Cell Third Dynamic ShutDown Interval End Time
BSC6900
EndTime3
BSC6900
ENF
Status
BSC6900
ENF
ENTITYT
BSC6900
ENTITYT
BSC6900
ERCODE
Return Code
BSC6900
ErgchEhichCodeNum
ERRALARMTHD
BSC6900
ERRDETECTSW
BSC6900
ESSN
BSC6900
ESTINDTMR
ESTREQTMR
ET
EndTime
BSC6900
ET
End Time
BSC6900
ET
End Time
BSC6900
ET
ET
End Time
BSC6900
ET
End Time
BSC6900
ET
End Time
BSC6900
ETD
End Date
BSC6900
ETP
Log Type
BSC6900
ETT
End Time
BSC6900
Event4aThd
Event4bThd
EventAReportDelay
Event A report delay[10ms] BSC6900 Event A threshold[0.1% ] BSC6900 Event B threshold[0.1% ] BSC6900
EventAThred
EventBThred
EWEEK
End week
BSC6900
EWSEQ
BSC6900
EX_ANO1_SIG_MAX
Upper Limit of Signal Output of External Analog 1 BSC6900 Lower Limit of Signal Output of External Analog 1 BSC6900 Sensor Type of External AnalogLimit of BSC6900 Upper 1 Measurement Range of External AnalogLimit of BSC6900 Lower 1 Measurement Range of External Analog 1 BSC6900 Upper Limit of Signal Output of External Analog 2 BSC6900
EX_ANO1_SIG_MIN
EX_ANO1_TYPE
EX_ANO1_VAL_MAX
EX_ANO1_VAL_MIN
EX_ANO2_SIG_MAX
EX_ANO2_SIG_MIN
Lower Limit of Signal Output of External Analog 2 BSC6900 Sensor Type of External AnalogLimit of BSC6900 Upper 2 Measurement Range of External AnalogLimit of BSC6900 Lower 2 Measurement Range of External Analog 2 BSC6900 Upper Limit of Signal Output of External Analog 3 BSC6900 Lower Limit of Signal Output of External Analog 3 BSC6900 Sensor Type of External AnalogLimit of BSC6900 Upper 3 Measurement Range of External AnalogLimit of BSC6900 Lower 3 Measurement Range of External Analog 3 BSC6900 Upper Limit of Signal Output of External Analog 4 BSC6900 Lower Limit of Signal Output of External Analog 4 BSC6900 Sensor Type of External Analog 4 BSC6900
EX_ANO2_TYPE
EX_ANO2_VAL_MAX
EX_ANO2_VAL_MIN
EX_ANO3_SIG_MAX
EX_ANO3_SIG_MIN
EX_ANO3_TYPE
EX_ANO3_VAL_MAX
EX_ANO3_VAL_MIN
EX_ANO4_SIG_MAX
EX_ANO4_SIG_MIN
EX_ANO4_TYPE
EX_ANO4_VAL_MAX
Upper Limit of Measurement Range of External AnalogLimit of BSC6900 Lower 4 Measurement Range of External Analog 4 BSC6900 BE F2P 4B Pending Time[ms]
EX_ANO4_VAL_MIN
F2PTvmPTAT
BSC6900
F2PTvmTimeToTrig
BE F2P 4B Time[ms]
BSC6900
FachId
FACH ID
BSC6900
FachIdforMcch
BSC6900
FachMaxPower
BSC6900
FachMaxPower
BSC6900
FachMaxPower
BSC6900
FACHMeasInd
BSC6900
FACHPwrReduceValue
BSC6900
FACTOR
FACTOR
Factor
BSC6900
FailTimeTh
Continuous FANADJUSTCOMMAND adjustment 0 command Discrete FANADJUSTCOMMAND adjustment 1 command Duty ratio FANADJUSTCOMMAND adjustment 2 command Fan adjustment mode
BSC6900
BSC6900
BSC6900
FANADJUSTMODE
BSC6900
FANFLAG
BSC6900
FANSPEEDMODE
BSC6900
FANTYPE
FanBox Type
BSC6900
FC
Physical layer flow control switch BSC6900 Flow control parameter index Flow control parameter index
FCINDEX
BSC6900
FCINDEX
BSC6900
FCINDEX
Flow control parameter index Flow control parameter index Flow control parameter index Flow control parameter index Flow control parameter index Flow control parameter index Flow control parameter index Flow control parameter index Flow control parameter index
BSC6900
FCINDEX
BSC6900
FCINDEX
BSC6900
FCINDEX
BSC6900
FCINDEX
BSC6900
FCINDEX
BSC6900
FCINDEX
BSC6900
FCINDEX
BSC6900
FCINDEX
BSC6900
FCSTYPE
BSC6900
FCSTYPE
BSC6900
FCSW
BSC6900
FddTpcDlStepSize
FDD DL power control step size[dB] BSC6900 Fdpch with MIMO priority Tx diversity mode
FdpchDivModforMIMO
BSC6900
FdpchDivModforMIMO
Fdpch without MIMO priority FdpchDivModforNonMIM Tx diversity O mode BSC6900 FDPCH diversity mode FdpchDivModforNonMIM for non MIMO O user BSC6900 FDPCH maximum reference power FDPCH minimum reference power
FdpchMaxRefPwr
BSC6900
FdpchMinRefPwr
BSC6900
FdpchPO2
FDWINDOW
BSC6900
FILE
File Name
BSC6900
FILE
BSC6900
FileName
File Name
BSC6900
FILEPATH
BSC6900
FILETYPE
FilterCoef
FilterCoefOf2D2F
BSC6900
FIN
Final
BSC6900
FixedMachsWinSize
FlcAlgoSwitch
BSC6900
FLOWCTRLSWITCH
BSC6900
FLOWCTRLSWITCH
BSC6900
FLOWCTRLSWITCH
BSC6900
FLOWCTRLSWITCH
BSC6900
FLOWCTRLSWITCH
BSC6900
FLOWCTRLSWITCH
BSC6900
FLOWCTRLSWITCH
BSC6900
FLOWCTRLSWITCH
BSC6900
FLOWCTRLSWITCH
BSC6900
FLOWCTRLSWITCH
BSC6900
FN
File Name
BSC6900
FN
File Name
BSC6900
FN
File Name
BSC6900
FN
File Name
BSC6900
FN
BSC6900
ForcedSHOSwitch
BSC6900
FPTIMER
BSC6900
FRAGSIZE
MP flake size
BSC6900
FRALNKN
FRALNKT
FREQ
Time Mode
BSC6900
FREQ
Time Mode
BSC6900
FRMLEN
TX frame length
BSC6900
FT
File Type
BSC6900
FTI
BSC6900
FTI
BSC6900
FUNCTIONSWITCH1
Function Switch1
BSC6900
FUNCTIONSWITCH2
Function Switch2
BSC6900
FUNCTIONSWITCH3
Function Switch3
BSC6900
FUNCTIONSWITCH4
Function Switch4
BSC6900
FUNCTIONSWITCH5
Function Switch5 Forward congestion remain bandwidth Forward congestion clear remain bandwidth Forward congestion clear remain ratio Forward congestion remain ratio Forward overload congestion clear remain bandwidth Forward overload congestion clear remain ratio Forward overload congestion remain bandwidth Forward overload congestion remain ratio
BSC6900
FWDCONGBW
BSC6900
FWDCONGCLRBW
BSC6900
FWDCONGCLRTH
BSC6900
FWDCONGTH
BSC6900
FWDOVLDCLRRSVBW
BSC6900
FWDOVLDCLRTH
BSC6900
FWDOVLDRSVBW
BSC6900
FWDOVLDTH
BSC6900
FWDRESVHOTH
FWDRSVHOBW
BSC6900
GainFactorBetaC
BSC6900
GainFactorBetaD
BSC6900
GCDF
GCDF
BSC6900
GCDF
Geocoordinate data format UMTS general BSC6900 common channel service downlink factor BSC6900 UMTS general common channel service uplink factor BSC6900 Global route management switch
GENCCHDL
GENCCHUL
GLOBALROUTESW
BSC6900
GoldMaxMode
Max Mode Of Narrowband AMRC For Golden Users BSC6900 Max Mode Of Wideband AMRC For Golden Users BSC6900
GoldMaxMode
GPSPERIOD
BSC6900
GRPID
BSC6900
GRPT
BSC6900
GSMCellIndex
GSMCellName
GSM cell name ICMP type which will be guarded Handover control threshold Handover control threshold Handover restore threshold Handover restore threshold
BSC6900
GUARDTYPE
BSC6900
HANDOVERCTHD
BSC6900
HANDOVERCTHD
BSC6900
HANDOVERRTHD
BSC6900
HANDOVERRTHD
BSC6900
HANDOVERSW
HangBlockNum5A
BSC6900
HappyBR
BSC6900
HarqPreaCap
BSC6900
HBDelaycnd
HBINTER
Heartbeat interval
BSC6900
HCARRYT
BSC6900
Punish Timer Length for HCodeAdjPunshTimerLe Code Adjust ngth for HSDPA
BSC6900
HCSPrio
BSC6900
HCSPrio
BSC6900
HDBKGDL
UMTS HSDPA background service downlink factor BSC6900 HSDPA background primary path
HDBKGPRIPATH
BSC6900
HDBKGPRITH
HSDPA background pri path load threshold BSC6900 HSDPA background secondary path
HDBKGSECPATH
BSC6900
HDBKGSECWHT
HSDPA background pri sec path load ratio threshold BSC6900 UMTS HSDPA conversational service downlink factor BSC6900
HDCONVDL
HDCONVPRIPATH
HSDPA conversational primary path BSC6900 HSDPA conversational pri path load threshold BSC6900 HSDPA conversational secondary path BSC6900 HSDPA conversational pri sec path load ratio threshold BSC6900
HDCONVPRITH
HDCONVSECPATH
HDCONVSECWHT
HSDPA high interactive pri HDHIGHINTERACTPRIT path load H threshold HSDPA high pri sec path HDHIGHINTERACTSEC load ratio WHT threshold
BSC6900
BSC6900
HDINTERDL
UMTS HSDPA interactive service downlink factor BSC6900 HSDPA high PRI interactive primary path BSC6900 HSDPA high PRI interactive secondary path BSC6900 HSDPA low PRI interactive primary path BSC6900 HSDPA low PRI interactive secondary path BSC6900 HSDPA middle PRI interactive primary path BSC6900
HDINTHGHPRIPATH
HDINTHGHSECPATH
HDINTLOWPRIPATH
HDINTLOWSECPATH
HDINTMIDPRIPATH
HDINTMIDSECPATH
BSC6900
HSDPA low interactive pri HDLOWINTERACTSEC sec path load WHT ratio threshold BSC6900 HSDPA mid interactive pri path load HDMIDINTERACTPRITH threshold
BSC6900
HSDPA mid interactive pri HDMIDINTERACTSECW sec path load HT ratio threshold BSC6900 UMTS HSDPA IMS signal downlink factor BSC6900 HSDPA IMS Signal primary path BSC6900 HSDPA IMS Signal pri path load threshold BSC6900 HSDPA IMS Signal secondary path
HDSIPDL
HDSIPPRIPATH
HDSIPPRITH
HDSIPSECPATH
BSC6900
HDSIPSECWHT
HSDPA IMS Signal pri sec path load ratio threshold BSC6900 UMTS HSDPA signal downlink factor BSC6900
HDSRBDL
HDSRBPRIPATH
HDSRBPRITH
HSDPA Signal pri path load threshold BSC6900 HSDPA Signal secondary path BSC6900 HSDPA Signal pri sec path load ratio threshold BSC6900 UMTS HSDPA streaming service downlink factor BSC6900 HSDPA streaming primary path HSDPA streaming pri path load threshold HSDPA streaming secondary path
HDSRBSECPATH
HDSRBSECWHT
HDSTRMDL
HDSTRMPRIPATH
BSC6900
HDSTRMPRITH
BSC6900
HDSTRMSECPATH
BSC6900
HDSTRMSECWHT
HSDPA streaming pri sec path load ratio threshold BSC6900 UMTS HSDPA voice service downlink factor BSC6900
HDVOICEDL
HDVOICEPRIPATH
HSDPA Voice primary path BSC6900 HSDPA Voice secondary path BSC6900
HDVOICESECPATH
HFRAATMLNKN
HhoRelocProcSwitch
HHOTRIG
BSC6900
HIMAGRPN
BSC6900
HoAsuTmr
BSC6900
HoCellUpdateRspTmr
HO cell update response timer[ms] of BSC6900 The priority coverage based interfrequency handover HO paging response timer[ms]
HOCovPrio
BSC6900
HoPagingRspTmr
BSC6900
HoPhychRecfgTmr
HoRelocReqTmr
HostType
BSC6900
HoSwitch
BSC6900
HOThdEcN0
HOThdRscp
Inter-freq measure target frequency trigger RSCP THD[dBm] BSC6900 HO wait timer for TrCh or RB reconfiguration response[ms] BSC6900
HoWtTrchRecfgRspTmr
HPN
High NCOPT port No. AF of hsdpa background service HSDPA best effort PBR threshold
BSC6900
HsdpaBackGroundAF
BSC6900
HsdpaBePBRThd
BSC6900
HsdpaConvAF
BSC6900
HsdpaInteractAF
BSC6900
HsdpaPrvidBitRateFilterL HSDPA bit rate en filter len BSC6900 Minimum Number of HSDPA RAB Establish HsdpaRabEstAttMinNum Request of BSC6900 Threshold HSDPA RAB Setup HsdpaRabEstSuccRatioT Successful hd Ratio[%]
BSC6900
HsdpaStreamAF
BSC6900
HsdpaStrmPBRThd
Hsdpa streaming PBR threshold BSC6900 HSDPA Throughput1KBPS Cell Dynamic ShutDown Hsdpa User number Threshold HS-DSCH MAC-D PDU size1[bit] HS-DSCH MAC-D PDU size2[bit] HS-DSCH MAC-D PDU size3[bit] HS-DSCH MAC-D PDU size4[bit] HS-DSCH MAC-D PDU size5[bit] HS-DSCH MAC-D PDU size6[bit] HS-DSCH MAC-D PDU size7[bit] HS-DSCH MAC-D PDU size8[bit]
HSDPAthroughput
BSC6900
HsdpaUserNumThd
BSC6900
HsdschMacdPduSize1
BSC6900
HsdschMacdPduSize2
BSC6900
HsdschMacdPduSize3
BSC6900
HsdschMacdPduSize4
BSC6900
HsdschMacdPduSize5
BSC6900
HsdschMacdPduSize6
BSC6900
HsdschMacdPduSize7
BSC6900
HsdschMacdPduSize8
BSC6900
HSN
BSC6900
HspaEnhSwitch
Cell Hspa Enhanced function switch BSC6900 prefered HSPA PLUS character BSC6900
HSPAPlusSelection
HspaPlusSwitch
Cell Hspa Plus function switch BSC6900 The Offset of HSPA Total Power[0.1dB]
HspaPower
BSC6900
HspaTimerLen
Support HspdcchSecondCodeSup second code p1 Flag for Tb1 Support HspdcchSecondCodeSup second code p2 Flag for Tb2 Support HspdcchSecondCodeSup second code p3 Flag for Tb3 Support HspdcchSecondCodeSup second code p4 Flag for Tb4
BSC6900
BSC6900
BSC6900
BSC6900
HsPdschCodeNum
HsPdschMaxCodeNum
Code Max Number for HS-PDSCH Code Min Number for HS-PDSCH HS-PDSCH MPO Constant[dB]
BSC6900
HsPdschMinCodeNum
BSC6900
HsPdschMPOConstEnu m
BSC6900
Hspdsch HspdschPrioTxDiversityM priority Tx ode diversity mode BSC6900 Hspdsch HspdschPrioTxDiversityM priority Tx ode diversity mode BSC6900
HSRN
BSC6900
HsScchCodeNum
HSUPA TTI 10ms schedule Hsupa10msSchPrdForGr period with ant grant[ms] BSC6900 HSUPA TTI 10ms schedule Hsupa10msSchPrdForNo period without nGrant grant[ms] BSC6900 HSUPA TTI 2ms schedule Hsupa2msSchPrdForGra period with nt grant[ms] BSC6900 HSUPA TTI 2ms schedule Hsupa2msSchPrdForNon period without Grant grant[ms] BSC6900 AF of hsupa background service
HsupaBackGroundAF
BSC6900
HsupaBeShoRateThd
BSC6900
HsupaConvAF
BSC6900
HsupaDcccStg
Equal priority HsupaEqualPriorityUserP HSUPA user BRThd PBR threshold BSC6900 High priority HsupaHighPriorityUserP HSUPA user BRThd PBR threshold BSC6900 Initial rate of HSUPA BE traffic[kbit/s] AF of hsupa interactive service
HsupaInitialRate
BSC6900
HsupaInteractAF
BSC6900
HsupaPrvidBitRateFilterL HSUPA bit rate en filter len BSC6900 Minimum Number of HSUPA RAB Establish HsupaRabEstAttMinNum Request BSC6900
Threshold of HSUPA RAB Setup HsupaRabEstSuccRatioT Successful hd Ratio[%] AF of hsupa streaming service HSUPA Throughput1KBPS
BSC6900
HsupaStreamAF
BSC6900
HSUPAthroughput
BSC6900
HSUPA auto retransmit load release HsupAuRetrnsLdRelThd threshold BSC6900 HSUPA auto retransmit load trigger HsupAuRetrnsLdTrigThd threshold Cell Dynamic BSC6900 ShutDown Hsupa User number Threshold HSUPA background primary path
HsupaUserNumThd
BSC6900
HUBKGPRIPATH
BSC6900
HUBKGPRITH
HSUPA background pri path load threshold BSC6900 HSUPA background secondary path
HUBKGSECPATH
BSC6900
HUBKGSECWHT
HSUPA background pri sec path load ratio threshold BSC6900 UMTS HSUPA background service uplink factor BSC6900 HSUPA conversational primary path BSC6900
HUBKGUL
HUCONVPRIPATH
HUCONVPRITH
HSUPA conversational pri path load threshold BSC6900 HSUPA conversational secondary path BSC6900 HSUPA conversational pri sec path load ratio threshold BSC6900 UMTS HSUPA conversational service uplink factor BSC6900
HUCONVSECPATH
HUCONVSECWHT
HUCONVUL
BSC6900
HSUPA high interactive pri HUHIGHINTERACTSEC sec path load WHT ratio threshold BSC6900 UMTS HSUPA interactive service uplink factor BSC6900 HSUPA high PRI interactive primary path BSC6900 HSUPA high PRI interactive secondary path BSC6900 HSUPA low PRI interactive primary path BSC6900 HSUPA low PRI interactive secondary path BSC6900 HSUPA middle PRI interactive primary path BSC6900
HUINTERUL
HUINTHGHPRIPATH
HUINTHGHSECPATH
HUINTLOWPRIPATH
HUINTLOWSECPATH
HUINTMIDPRIPATH
HUINTMIDSECPATH
BSC6900
HSUPA low interactive pri HULOWINTERACTSEC sec path load WHT ratio threshold BSC6900 Enable Humidity Alarm Reporting BSC6900
HUM_MASK
HUM_THD_HIGH
HUM_THD_LOW
BSC6900
HSUPA mid interactive pri HUMIDINTERACTSECW sec path load HT ratio threshold BSC6900
HUNILNKN
BSC6900
HUSIPPRIPATH
HSUPA IMS Signal primary path BSC6900 HSUPA IMS Signal pri path load threshold BSC6900 HSUPA IMS Signal secondary path
HUSIPPRITH
HUSIPSECPATH
BSC6900
HUSIPSECWHT
HSUPA IMS Signal pri sec path load ratio threshold BSC6900 UMTS HSUPA IMS signal uplink factor BSC6900
HUSIPUL
HUSRBPRIPATH
HSUPA Signal primary path BSC6900 HSUPA Signal pri path load threshold BSC6900 HSUPA Signal secondary path BSC6900 HSUPA Signal pri sec path load ratio threshold BSC6900 UMTS HSUPA signal uplink factor BSC6900 HSUPA streaming primary path HSUPA streaming pri path load threshold HSUPA streaming secondary path
HUSRBPRITH
HUSRBSECPATH
HUSRBSECWHT
HUSRBUL
HUSTRMPRIPATH
BSC6900
HUSTRMPRITH
BSC6900
HUSTRMSECPATH
BSC6900
HUSTRMSECWHT
HSUPA streaming pri sec path load ratio threshold BSC6900 UMTS HSUPA streaming service uplink factor BSC6900
HUSTRMUL
HUVOICEPRIPATH
HSUPA Voice primary path BSC6900 HSUPA Voice secondary path BSC6900 UMTS HSUPA voice service uplink factor BSC6900
HUVOICESECPATH
HUVOICEUL
HVCI
High VCI
BSC6900
HVPI
High VPI
BSC6900
HystFor1A
1A hysteresis[0.5d B] BSC6900 1B hysteresis[0.5d B] BSC6900 1C hysteresis[0.5d B] BSC6900 1D hysteresis[0.5d B] BSC6900 1F hysteresis[0.5d B] BSC6900 1J hysteresis[0.5d B] BSC6900 2B hysteresis[0.5d B] BSC6900
HystFor1B
HystFor1C
HystFor1D
HystFor1F
HystFor1J
HystFor2B
Hystfor2C
2C hysteresis[0.5d B] BSC6900 2D hysteresis[0.5d B] BSC6900 2D hysteresis[0.5d B] BSC6900 2F hysteresis[0.5d B] BSC6900 2F hysteresis[0.5d B] BSC6900 3A hysteresis[0.5d B] BSC6900 3C hysteresis[0.5d B] BSC6900 Inter-RAT hysteresis[0.5d B] BSC6900 HHO hysteresis[0.5d B] BSC6900
HystFor2D
Hystfor2D
HystFor2F
Hystfor2F
Hystfor3A
Hystfor3C
HystforInterRAT
HystForPrdInterFreq
IARXTMR
Inactive RX timer
BSC6900
IATXTMR
Inactive TX timer
BSC6900
ICMPPKGLEN
BSC6900
ID
Task ID
BSC6900
ID
BSC6900
IdleCellBarred
BSC6900
Intra-freq cell reselection ind IdleIntraFreqReselection for SIB3 BSC6900 Hysteresis 1 for idle mode[2dB] Hysteresis 2 for idle mode[2dB]
IdleQhyst1s
BSC6900
IdleQhyst2s
BSC6900
IdleQoffset1sn
IdleQoffset2sn
IdleQoffset2sn[ dB] BSC6900 Inter-freq cell reselection threshold for idle mode[2dB] BSC6900 Intra-freq cell reselection threshold for idle mode[2dB] BSC6900
IdleSintersearch
IdleSintrasearch
IdleTbarred
BSC6900
IDLETMR
Timer_Idle
BSC6900
The timer length of anti pingpong NCOV IFAntiPingpangTimerLen interfreq gth handover[s]
BSC6900
IgorTmr
TigOR[ms]
BSC6900
IMAGRPN
IMAGRPN
IMAID
IMA ID
BSC6900
IMALNKN
BSC6900
IMAVER
BSC6900
BSC6900
ImsChlType
BSC6900
IMSGBR
BSC6900
ImsiMax
BSC6900
ImsiMin
BSC6900
ImsInitialAccessRate
Ims initial rate[kbit/s] Maximum of IMSI route parameter in IDNNS Minimum of IMSI route parameter in IDNNS
BSC6900
ImsiRtMax
BSC6900
ImsiRtMin
BSC6900
IMSMBR
IMS MAC-c flow MBR For BSC6900 Threshold DPCCH Transmission Cycle 2[EDCH TTI] BSC6900 DRX Inactivity Threshold[subf rame] BSC6900 Inactivity
InactThsForCycle2
InactThsForDrxCycle
INFRA_RED_MASK
INHTMR
Timer_NOCREDIT Integrity protection algorithm Interactive MAC-c flow GBR Interactive MAC-c flow MBR
BSC6900
IntegrityProtectAlgo
BSC6900
INTERACTGBR
BSC6900
INTERACTMBR
BSC6900
InterFreqActiveType
MBDR switch BSC6900 Inter-freq measure target frequency InterFreqCovHOThdEcN trigger Ec/No 0 THD[dB] BSC6900 Inter-freq CS measure start Ec/No InterFreqCSThd2DEcN0 THD[dB] BSC6900 Inter-freq CS measure start RSCP InterFreqCSThd2DRSCP THD[dBm] BSC6900 Inter-freq CS measure stop Ec/No InterFreqCSThd2FEcN0 THD[dB] BSC6900 Inter-freq CS measure stop RSCP InterFreqCSThd2FRSCP THD[dBm] BSC6900
BSC6900
InterFreqFilterCoef
Inter-frequency measure filter coeff BSC6900 Inter-freq handover type switch BSC6900 Inter-freq H measure start Ec/No THD[dB] BSC6900 Inter-freq H measure start RSCP THD[dBm] BSC6900 Inter-freq H measure stop Ec/No THD[dB] BSC6900
InterFreqHOSwitch
InterFreqHThd2DEcN0
InterFreqHThd2DRSCP
InterFreqHThd2FEcN0
InterFreqHThd2FRSCP
Inter-freq and Inter-RAT Meas Ctrl Info InterFreqInterRatMeasInd Ind BSC6900 Inter-freq Measure Quantity
InterFreqMeasQuantity
BSC6900
InterFreqMeasTime
Inter-freq measure timer length[s] BSC6900 Inter-freq measure timer length[s] BSC6900 Inter-
InterFreqMeasTime
BSC6900
measure target frequency InterFreqNCovHOThdEc trigger Ec/No N0 THD[dB] BSC6900 Inter-freq R99 PS measure InterFreqR99PsThd2DEc start Ec/No N0 THD[dB] BSC6900 Inter-freq R99 PS measure InterFreqR99PsThd2DRS start RSCP CP THD[dBm] BSC6900 Inter-freq R99 PS measure InterFreqR99PsThd2FEc stop Ec/No N0 THD[dB] BSC6900 Inter-freq R99 PS measure InterFreqR99PsThd2FRS stop RSCP CP THD[dBm] BSC6900 Inter-freq and Inter-RAT coexist switch BSC6900
InterFreqRATSwitch
InterFreqReportMode
Inter-frequency measure report mode BSC6900 Inter-frequency measure report mode BSC6900
InterFreqReportMode
BSC6900
Inter RAT Inter InterPlmnHoAllowedInter Plmn Ho Rat Allowed BSC6900 Intra RAT Inter InterPlmnHoAllowedIntra Plmn Ho Rat Allowed BSC6900
InterRatActiveType
MBDR switch
BSC6900
Inter-RAT CS measure start Ec/No InterRATCSThd2DEcN0 THD[dB] BSC6900 Inter-RAT CS measure start RSCP InterRATCSThd2DRSCP THD[dBm] BSC6900 Inter-RAT CS measure stop Ec/No InterRATCSThd2FEcN0 THD[dB] BSC6900 Inter-RAT CS measure stop RSCP InterRATCSThd2FRSCP THD[dBm] BSC6900
BSC6900
InterRATFilterCoef
Inter-RAT filter coeff BSC6900 Inter-RAT handover max attempt times BSC6900 Emergency LCS Inter-Rat Handover Permit BSC6900 Inter-RAT CS handover decision THD[dBm] Inter-Rat Handover Type
InterRATHOAttempts
InterRatHOPermit
InterRATHOThd
BSC6900
InterRatHOType
BSC6900
InterRATHThd2DEcN0
Inter-RAT H measure start Ec/No THD[dB] BSC6900 Inter-RAT H measure start RSCP THD[dBm] BSC6900 Inter-RAT H measure stop Ec/No THD[dB] BSC6900 Inter-RAT H measure stop RSCP THD[dBm] BSC6900 Inter-RAT measure timer length[s] BSC6900 Inter-RAT measure timer length[s] BSC6900
InterRATHThd2DRSCP
InterRATHThd2FEcN0
InterRATHThd2FRSCP
InterRATMeasTime
InterRATMeasTime
BSC6900
Inter-RAT CS handover decision InterRATNCovHOCSThd THD[dBm] Inter-RAT PS handover decision InterRATNCovHOPSThd THD[dBm] Inter-RAT InterRATPeriodReportInt period report erval interval[ms]
BSC6900
BSC6900
BSC6900
InterRatPhyChFailNum
InterRATPingPongHyst
BSC6900
BSC6900
Inter-RAT R99 PS measure InterRATR99PsThd2DEc start Ec/No N0 THD[dB] BSC6900 Inter-RAT R99 PS measure InterRATR99PsThd2DRS start RSCP CP THD[dBm] BSC6900 Inter-RAT R99 PS measure InterRATR99PsThd2FEc stop Ec/No N0 THD[dB] BSC6900 Inter-RAT R99 PS measure InterRATR99PsThd2FRS stop RSCP CP THD[dBm] BSC6900
InterRatReportMode
BSC6900
InterRatReportMode
BSC6900
BSC6900
INTERVAL
INTERVAL
BSC6900
IntraAblThdFor1FEcNo
1F event absolute EcNo threshold[dB] BSC6900 1F event absolute RSCP threshold[dBm] BSC6900
IntraAblThdFor1FRSCP
IntraFreqFilterCoef
IntraFreqMeasInd
Intra-freq Meas Ctrl Info Ind BSC6900 Intra-freq Measure Quantity Intra-
IntraFreqMeasQuantity
BSC6900
BSC6900
IntraMbscInd
Intra-MBSC Indication.
BSC6900
IntraRelThdFor1A
BSC6900
IntraRelThdFor1ACSVP
VP service 1A event relative THD[0.5dB] BSC6900 PS service 1A event relative threshold[0.5d B] BSC6900 1B Event Relative Threshold[dB] BSC6900
IntraRelThdFor1APS
IntraRelThdFor1B
BSC6900
IntraRelThdFor1BCSVP
VP service 1B event relative THD[0.5dB] BSC6900 PS service 1B event relative threshold[0.5d B] BSC6900
IntraRelThdFor1BPS
IntrTmr
TinTR[ms]
BSC6900
INTV
BSC6900
INTV
BSC6900
IP
IP Address
BSC6900
IPADDR
Local IP address
BSC6900
IPADDR
IP address
BSC6900
IPADDR
IP address
BSC6900
IPADDR
IP address
BSC6900
IPADDR
Local IP address
BSC6900
IPADDR
IPADDR
BSC6900
IPADDR
Local IP address
BSC6900
IPADDR
IP address
BSC6900
IPHC
Head compress
BSC6900
IPHC
Head compress
BSC6900
IPINDEX
IP address index
BSC6900
IPINDEX
IP address index
BSC6900
IPLOGPORTFLAG
IPLPN
IPMUXINDEX
IP MUX Index BSC6900 NodeB IP_TRANS Slot No. NodeB IP_TRANS Subrack No.
IPSN
BSC6900
IPSRN
BSC6900
IPTRANSAPARTIND
IP Trans Apart Ind BSC6900 Access class 0 barred indicator BSC6900 Access class 10 barred indicator Access class 11 barred indicator Access class 12 barred indicator Access class 13 barred indicator
IsAccessClass0Barred
IsAccessClass10Barred
BSC6900
IsAccessClass11Barred
BSC6900
IsAccessClass12Barred
BSC6900
IsAccessClass13Barred
BSC6900
IsAccessClass14Barred
BSC6900
IsAccessClass15Barred
BSC6900
IsAccessClass1Barred
Access class 1 barred indicator BSC6900 Access class 2 barred indicator BSC6900 Access class 3 barred indicator BSC6900 Access class 4 barred indicator BSC6900 Access class 5 barred indicator BSC6900 Access class 6 barred indicator BSC6900 Access class 7 barred indicator BSC6900 Access class 8 barred indicator BSC6900 Access class 9 barred indicator BSC6900 Is First Class Transport Resource Group
IsAccessClass2Barred
IsAccessClass3Barred
IsAccessClass4Barred
IsAccessClass5Barred
IsAccessClass6Barred
IsAccessClass7Barred
IsAccessClass8Barred
IsAccessClass9Barred
ISFIRSTCLASS
BSC6900
IsFixedMachsWinSize
BSC6900
ISPRIMARYPLMN
ISQOSPATH
IS QOSPATH BSC6900
IsROOTNODE
Is Root Node
BSC6900
ISSUPPORTFRA
Support FRA
BSC6900
ITFT
Interface Type BSC6900 AC Restriction Interval of Cell By IU BSC6900 DL OLC released RAB number BSC6900 UL OLC released RAB number BSC6900 Iu CS Release protection timer[s] BSC6900
IuAcIntervalOfCell
IubDlOlcRelRabNum
IubUlOlcRelRabNum
IuCSRelNoRABTmr
IUCTHD
BSC6900
IUFCSW
IuPSRelNoRABTmr
Iu PS Release protection timer[s] BSC6900 Congestion Control Indicator over IUR for NRNC BSC6900 Iur downlink transfer control threshold BSC6900 Iur downlink transfer control threshold BSC6900 Iur downlink transfer restore threshold BSC6900 Iur downlink transfer restore threshold BSC6900 Iur downlink transfer flow control switch BSC6900 IUR Interface Existing Indication
IurCongCtrlSuppInd
IURDLCTHD
IURDLCTHD
IURDLRTHD
IURDLRTHD
IURDLSW
IurExistInd
BSC6900
IURGCTHD
BSC6900
IURGCTHD
BSC6900
IURGRTHD
BSC6900
IURGRTHD
BSC6900
IURGSW
Iur-g flow control switch BSC6900 Hsdpa cap ind over IUR for NRNC BSC6900 Hsupa cap ind over IUR for NRNC BSC6900 Iur uplink transfer control threshold BSC6900 Iur uplink transfer control threshold BSC6900 Iur uplink transfer restore threshold BSC6900 Iur uplink transfer restore threshold BSC6900 Iur uplink transfer flow control switch BSC6900
IurHsdpaSuppInd
IurHsupaSuppInd
IURULCTHD
IURULCTHD
IURULRTHD
IURULRTHD
IURULSW
IuStatePolicyForPool
J0BYTE_FORMAT
J0RXBYTE_FORMAT
J0RXT
BSC6900
J0RXVALUE
BSC6900
J0TXBYTE_FORMAT
J0 Transmit Format
BSC6900
J0TXT
J0 transmit type
BSC6900
J0TXVALUE
J0 transmit value
BSC6900
J0TYPE
J0 type
BSC6900
J1BYTE_FORMAT
J1RXBYTE_FORMAT
J1RXT
BSC6900
J1RXVALUE
BSC6900
J1TXBYTE_FORMAT
J1 Transmit Format
BSC6900
J1TXT
J1 transmit type
BSC6900
J1TXVALUE
J1 transmit value
BSC6900
J1TYPE
J1 type
BSC6900
J2ALMSWITCH
BSC6900
J2BYTE_FORMAT
J2MODE
J2 length
BSC6900
J2RXVALUE
BSC6900
J2TXVALUE
J2 transmit value
BSC6900
JAUTOADD
K2MODE
K2 Mode
BSC6900
KEEPALIVE
KEEPTMR
Timer_KeepAlive the Period of KPI Alarm Check RNC Report KPI Alarm Switch
BSC6900
KpiAlarmChkTimes
BSC6900
KpiAlarmSwitch
BSC6900
LAC
LACPMODE
Aggregation Mode
BSC6900
LATITUDE
BSC6900
LATITUDESEC
BSC6900
LATPRD
Delay measure period [100ms] BSC6900 Delay adjust suspend period [LATTH] BSC6900 Rate down threshold for delay [ms]
LATSUSTM
LATTH
BSC6900
LATUDK
average delay down filter mantissa BSC6900 average delay up filter mantissa BSC6900
LATUPK
LCARRYT
BSC6900
LdbAvgFilterLen
LdbDRDchoice
BSC6900
LdbDRDchoice
BSC6900
balance DRD power remain LdbDRDLoadRemainThd threshold for DCH DCH[%] BSC6900 Dl load balance DRD power remain LdbDRDLoadRemainThd threshold for DCH DCH[%] BSC6900 Dl load balance DRD power remain LdbDRDLoadRemainThd threshold for HSDPA HSDPA[%] BSC6900 Dl load balance DRD power remain LdbDRDLoadRemainThd threshold for HSDPA HSDPA[%] BSC6900 Load balance DRD offset for DCH[%] BSC6900 Load balance DRD offset for HSDPA[%] BSC6900 Load balance DRD switch for DCH BSC6900 Load balance DRD switch for DCH BSC6900 Load balance DRD switch for HSDPA BSC6900 Load balance DRD switch for HSDPA BSC6900
LdbDRDOffsetDCH
LdbDRDOffsetHSDPA
LdbDRDSwitchDCH
LdbDRDSwitchDCH
LdbDRDSwitchHSDPA
LdbDRDSwitchHSDPA
LdcSwitch
load control algorithm switch the switch of periodic load reporting LDR code priority indicator
BSC6900
LdPrdRprtSwitch
BSC6900
LdrCodePriUseInd
BSC6900
BSC6900
LdrFirstPri
first priority for load reshuffling BSC6900 fourth priority for load reshuffling
LdrFourthPri
BSC6900
LdrPeriodTimerLen
BSC6900
LdrSecondPri
LdrThirdPri
third priority for load reshuffling BSC6900 Path Load EQ Threshold Table Index BSC6900
LEI
LEIBRZ
LEIGLD
LEISLV
LENO
BSC6900
LEVEL
Log Level
BSC6900
LEVEL
Log Level
BSC6900
LEVEL
BSC6900
Level
MD LEVEL
BSC6900
LFRAATMLNKN
LGCAPPTYPE
BSC6900
LGCAPPTYPE
BSC6900
LGCAPPTYPE
LGCAPPTYPE
LICALMCTHD
BSC6900
LICALMRTHD
LIMAGRPN
LimitCMDlSFThd
BSC6900
LittleRateThd
LL
Lower Limit
BSC6900
LLCN
Channel No.
BSC6900
LNKNUMMODE
BSC6900
LNKREDFLAG
BSC6900
LNKSLSMASK
LNKSLSMASK
LNKT
Link type
BSC6900
LNKT
Link type
BSC6900
LoadHoOn3G2GldInd
BSC6900
LOCALIP
Local IP address
BSC6900
LOCALIP
Local IP address
BSC6900
LOCALIP
Local IP address
BSC6900
LoCell
BSC6900
LOCINFOKEY
BSC6900
LOCIP1
BSC6900
LOCIP2
BSC6900
LOCKST
LOCPN
BSC6900
LODCTRL
BSC6900
LOGCTHD
BSC6900
LOGCTHD
BSC6900
LOGPORTFLAG
LOGPORTNO
LOGPORTSN
LOGRTHD
BSC6900
LOGRTHD
BSC6900
LOGSW
BSC6900
LOGTYPE
LONGITUDE
BSC6900
LONGITUDESEC
BSC6900
LOOPSW
BSC6900
LOPT
Loop type
BSC6900
LOPT
Loop type.
BSC6900
LOPT
Loop type
BSC6900
LOSTSUSTM
LPN
BSC6900
LPN
BSC6900
LPN
LPN
LPN
BSC6900
LPNSN
BSC6900
LPNTYPE
BSC6900
LRRCCONNCCPUTHD
LRRCCONNRCPUTHD
LSN
BSC6900
LSRN
BSC6900
LSTCMD
BSC6900
LstFormat
BSC6900
LT
Load type
BSC6900
LT
Log Type
BSC6900
LT
Log Type
BSC6900
LUNILNKN
BSC6900
LVCI
Low VCI
BSC6900
LVPI
Low VPI
BSC6900
M3UASRVPN
M3UA service listening port No. BSC6900 MAC Transmission Cycle[subfram e] BSC6900 MAC Inactivity Threshold[ED CH TTI] BSC6900
MacDtxCycle
MacInactiveThreshold
Cell_FACH L2 MacPduMaxSizeForEFac enhance max h PDU size[byte] BSC6900 Cell_DCH L2 MacPduMaxSizeForL2En enhance max hance PDU size[byte] BSC6900
MAIDX
MA Index
BSC6900
MAINLINK
MANAME
MA Name
BSC6900
MapSwitch
MASK
Subnet mask
BSC6900
MASK
Subnet mask
BSC6900
MASK
Subnet mask
BSC6900
MASK
MASK
BSC6900
MaxAllowedUlTxPower
BSC6900
MaxAllowedUlTxPower
BSC6900
Max allowed MaxAllowedUlTxPowerIn UE UL TX d power ind Cell Antenna Max Coverage[m] Cell Antenna Max Coverage[ft]
BSC6900
MaxAntennaRange
BSC6900
MaxAntennaRangeImp
BSC6900
MAXASSOCRETR
BSC6900
MaxAttNum
Inter-Freq DRD max attempt times BSC6900 Inter-RAT DRD max attempt times BSC6900
MaxAttNum
MaxBitRate
MaxBitRate
MAXBW
MaxCAPSLowLoad
MaxCAPSMidLoad
MAXCC
MaxCC
BSC6900
MaxCellInActiveSet
MaxCmchPi
MaxEcN0Value
BSC6900
Max number of cell in EDCH MaxEdchCellInActiveSet active set BSC6900 Maximum Number of EDCH PDU retransfer[time s] BSC6900 Maximum EFACH user number Max transmit power of FACH[0.1dB] Maximum Frame Length[byte]
MaxEdchRetransNum
MAXEFACHUserNum
BSC6900
MaxFachPower
BSC6900
MAXFRAMELEN
BSC6900
MaxGpsSats
Maximum Num Of GPS Satellites BSC6900 Maximum HSDPA user number Maximum HSUPA user number
MaxHsdpaUserNum
BSC6900
MaxHsupaUserNum
BSC6900
Max number of continuous MaxMeasContInvalidTim invalid es measurement BSC6900 PPP mux max mux-frame length BSC6900 PPP mux max mux-frame length BSC6900
MAXMFLEN
MAXMFLEN
MaxMissTimes
BSC6900
MaxNrOfUlDpchs
MAXNRP
Max_NRP
BSC6900
MAXNUM
MAXPATHRETR
BSC6900
MaxPCPICHPower
MAXPD
MaxQueueTimeLen
BSC6900
MAXSFLEN
PPP mux max sub-frame length BSC6900 PPP mux max sub-frame length BSC6900
MAXSFLEN
BSC6900
MAXTIME
MAXTTL
MAX TTL Max transmit power of cell[0.1dBm] Max UL TX power of background service
BSC6900
MaxTxPower
BSC6900
MaxUlTxPowerforBac
BSC6900
MaxUlTxPowerforConv
Max UL TX power of conversational service BSC6900 Max UL TX power of interactive service Max UL TX power of streaming service
MaxUlTxPowerforInt
BSC6900
MaxUlTxPowerforStr
BSC6900
MaxUserNumCodeAdj
BSC6900
MBDRFlag
The flag of the MBDR BSC6900 The priority of MBDR neighbor cell BSC6900
MBDRPrio
MBFDCHKN
BSC6900
MBFDLOCALIP
MbmsAF
AF of MBMS serviceMBMS BSC6900 UMTS common channel service downlink factor BSC6900
MBMSCCHDL
MbmsChInd
MbmsInactTmr
MbmsIubSharingSwitch
MbmsMCC
MbmsMNC
Mobile network code BSC6900 MBMS neighboring cell indicator MBMS services number released
MbmsNCellInd
BSC6900
MbmsOlcRelNum
BSC6900
Mbms PreemptAlgoS MbmsPreemptAlgoSwitch witch BSC6900 Mbms Ptp UpLink Bit Rate[kbit/s]
MbmsPtpUlBitRate
BSC6900
MbmsSaId
MBMS SA ID
BSC6900
MbmsServiceId
MBMS ServiceId
BSC6900
MbmsSwitch
MBMSthroughput
BSC6900
MbmsTransMode
MBS
Load Difference Threshold Between 3G Mbsc3G2GLdBlcCsDelta AndLoadOf CS PS 2G Thrd Service BSC6900 Difference Threshold Between 3G Mbsc3G2GLdBlcPsDelta And 2G Of Ps Thrd Service BSC6900 Non-coverage handover based on 2G MbscNcovHoOn2GldInd load Indication BSC6900 GERAN System Information MbscReqGeranInfoSwitc Exchange h Switch Service Distribution and Load MbscServiceDiffLdbSwitc Balancing h Switch
BSC6900
BSC6900
MCC
MCC
MCC
Mobile country code BSC6900 Mcch Access Period coefficient Mcch Mod Period coefficient Mcch Repetition Period coefficient
McchAccessPeriodCoef
BSC6900
McchModPeriodCoef
BSC6900
McchRepPeriodCoef
BSC6900
MCCLASS
MC PRI number
BSC6900
MCR
BSC6900
MDIDX
MD INDEX
BSC6900
MDName
MD NAME
BSC6900
MeasQuantityOf3A
3A Measure Quantity
BSC6900
MEPID
MEP ID
BSC6900
MEPTYPE
MEP Type
BSC6900
MHF
BSC6900
MichId
MICH ID
BSC6900
MichPower
MICH Power[dB]
BSC6900
MichSttdInd
BSC6900
MINBW
MinCmchPi
MinDlChCodeLen
Minimum SF of downlink DPCH BSC6900 Minimum Ec/N0 Value[0.5dB] AMR Event E Reporting Period BE Event E Reporting Period BE Event F Reporting Period
MinEcN0Value
BSC6900
MinForAmrE
BSC6900
MinForBeE
BSC6900
MinForBeF
BSC6900
MinForDlBasicMeas
MinForDlOlcMeas
MinForHsdpaPrvidRateM HSDPA bit rate eas meas cycle[m] BSC6900 HSDPA need pwr meas cycle[m]
MinForHsdpaPwrMeas
BSC6900
MinForUlBasicMeas
MinForUlOlcMeas
MinForVpE
BSC6900
MINLNKNUM
Min Number of Links Activated BSC6900 Min transmit power of PCPICH[0.1dB m] BSC6900 Min interval of BFD packet receive [ms] BSC6900 Min interval of BFD packet send [ms] BSC6900
MinPCPICHPower
MINRXINT
MINTXINT
MinUlChCodeLen
MIRRORDPN
BSC6900
MIRRORSPN
MIRRORTYPE
Mirror Type
BSC6900
Mmax
MNC
MNC
MNC
MocnControlSwitch
BSC6900
MOCNSupport
MOCN Support
BSC6900
MODE
MODE
MODE
Configure Mode
BSC6900
MODE
BSC6900
MODE
MODE
Check mode
BSC6900
MODINDTMR
MODREQTMR
BSC6900
MoniterPrd
MoniTimeLen
MPGRPN
MPGRPN
MPS
MPTYPE
MP type
BSC6900
MPUSLOT
MPUSUBRACK
Msch Switch For MtchMulti MschSwitchForMtchMulti Sccpch BSC6900 Msch Switch For MschSwitchForNonMtch NonMtchMulti Multi Sccpch BSC6900
MsgContent
Msg Content
BSC6900
MsgInd
Message Indicator
BSC6900
MSPCMD
BSC6900
MSW
BSC6900
MtchMaxPwr
MtchMaxSf
MTCH maximal SF
BSC6900
MtchMinPerc0
Mtch Minimal Power Percent for priority 0[%] BSC6900 Mtch Minimal Power Percent for priority 15[%] BSC6900 MTCH Multiplex Threshold[kbit/ s] BSC6900
MtchMinPerc15
MtchMultiplexThd
MtchRohcSwitch
BSC6900
MtchRsvPwr
MtchRsvSf
MTRLGY
Metrology
BSC6900
MTRLGY
Metrology
BSC6900
MTU
MTU value
BSC6900
MTU
MTU[Byte]
BSC6900
MTU
BSC6900
MUXTIME
BSC6900
MUXTIME
BSC6900
MUXTYPE
IP MUX Type
BSC6900
MYDISCRIMINATOR
N1
N1
BSC6900
N300
Constant 300
BSC6900
N302
Constant 302
BSC6900
N304
Constant 304
BSC6900
N308
Constant 308
BSC6900
N312
Constant 312
BSC6900
N313
Constant 313
BSC6900
N315
Constant 315
BSC6900
N381
Constant 381
BSC6900
NAME
OSP name
BSC6900
NAME
DSP name
BSC6900
NAME
BSC6900
NAME
NAME
NAME
NAME
BSC6900
NAME
BSC6900
NAME
BSC6900
NAME
M3UA Signalling link set name BSC6900 M3UA Signaling link name
NAME
BSC6900
NB01max
NB01min
Random backoff lower limit BSC6900 AMR_RRC Number per Second for NodeB
NBAmrRrcNum
BSC6900
NBAPSRVPN
NBAP service listening port No. BSC6900 NodeB ATM_TRANS IP address BSC6900 NodeB ATM_TRANS IP Mask BSC6900 HiPri_RRC Number per Second for NodeB
NBATMOAMIP
NBATMOAMMASK
NBHighPriRrcNum
BSC6900
NBIPOAMIP
NBIPOAMMASK
NBLB1
NBLB2
NBMCacAlgoSwitch
BSC6900
Downlink CAC algorithm NBMDlCacAlgoSelSwitch switch BSC6900 Cell LDC algorithm switch
NBMLdcAlgoSwitch
BSC6900
BHO Select NbmLdcBHOUeSelSwitc User algorithm h switch BSC6900 Mac-hs Reset NBMMachsResetAlgoSel algorithm Switch switch BSC6900 Uplink CAC algorithm NBMUlCacAlgoSelSwitch switch
BSC6900
Set WPS user NbmWpsAlgorithmPriority priority BSC6900 Set WPS Algorithm NbmWpsAlgorithmSwitch Switch
BSC6900
NBscIndex
BSC6900
NBscIndex
BSC6900
NBTotalRrcNumThd
NBTRANTP
NodeB TransType
BSC6900
NCC
NCellId
BSC6900
NCellLdrRemainThd
ShutDown Neighbour Cell Load Remain threshold BSC6900 RNC ID of a neighboring cell
NCellRncId
BSC6900
NcMode
BSC6900
NCountingThd
Counting Threshold
BSC6900
NcovHoOn2GldInd
Ncrnonhcs
NEIGHBOR
Adjacent flag
BSC6900
NEXTHOP
NEXTHOP
NEXTHOP
Forward route address BSC6900 Threshold for UE fast speed decision BSC6900
NFastSpdEst
NI
BSC6900
NInsyncInd
BSC6900
NMO
NNSfTmr
Timer NNSF
BSC6900
Lower limit of No.1 input NO1M48ALMTHDDOWN -48V[-V] Upper limit of No.1 input -48V[-V]
BSC6900
NO1M48ALMTHDUP
BSC6900
Lower limit of No.2 input NO2M48ALMTHDDOWN -48V[-V] Upper limit of No.2 input -48V[-V]
BSC6900
NO2M48ALMTHDUP
BSC6900
Lower limit of No.3 input NO3M48ALMTHDDOWN -48V[-V] Upper limit of No.3 input -48V[-V]
BSC6900
NO3M48ALMTHDUP
BSC6900
Lower limit of No.4 input NO4M48ALMTHDDOWN -48V[-V] Upper limit of No.4 input -48V[-V]
BSC6900
NO4M48ALMTHDUP
BSC6900
Lower limit of No.5 input NO5M48ALMTHDDOWN -48V[-V] Upper limit of No.5 input -48V[-V]
BSC6900
NO5M48ALMTHDUP
BSC6900
Lower limit of No.6 input NO6M48ALMTHDDOWN -48V[-V] Upper limit of No.6 input -48V[-V]
BSC6900
NO6M48ALMTHDUP
BSC6900
NODEBCABN
BSC6900
NodeB Max NodeBHsdpaMaxUserNu HSDPA User m Number NodeB Max NodeBHsupaMaxUserNu HSUPA User m Number
BSC6900
BSC6900
NODEBID
NodeB ID
BSC6900
NODEBID
NodeB ID
BSC6900
NodeBId
NodeBId
BSC6900
NodeBId
NodeB ID
BSC6900
NODEBIMAGRPN
BSC6900
NodeBLdcAlgoSwitch
BSC6900
NodeBName
NodeB name
BSC6900
NODEBNAME
BSC6900
NodeBProtclVer
BSC6900
NODEBPT
BSC6900
NODEBRPTPERIOD
Report period[min]
BSC6900
NODEBRPTTYPE
Report type
BSC6900
NODEBSN
BSC6900
NODEBSRN
BSC6900
NODEBSUBBRDTYPE
NodeBType
NodeB Type
BSC6900
NodeSyncPeriod
NodeSyncTime
NODET
NodeType
BSC6900
NonhcsInd
Non-HCS indicator
BSC6900
Target Nonserving E-DCH NonServToTotalEdchPwr to Total E-DCH Ratio Power ratio[%] BSC6900 Num of continuous out of sync ind BSC6900
NOutsyncInd
NPrio
NPrio
NPrio
NPrioFlag
NPtpToPtmOffset
BSC6900
NQUERIES
NRI
BSC6900
NRncId
Neighboring RNC ID
BSC6900
NrncId
Nrnc ID
BSC6900
NRncId
Neighboring RNC ID
BSC6900
NSAP
BSC6900
NSAP
BSC6900
Nsap
ATM address
BSC6900
NSlowSpdEst
NullNRI
NullNRI VALUE
BSC6900
NumberOfACs
NumberOfACs
BSC6900
OAMFLOWBW
OAMFLOWBW
OAMFLOWBW
OAMFLOWBW
OAMFLOWBW
OAMFLOWDSCP
DSCP of OAM flow BSC6900 OAM flow min bandwidth switch BSC6900
OAMMINBWKEY
OBJTP
Object Type
BSC6900
OffQoffset1Heavy
OffQoffset1Light
OffQoffset2Heavy
OffQoffset2Light
OffSinterHeavy
BSC6900
OffSinterLight
BSC6900
OlcPeriodTimerLen
BSC6900
OMUIP
OMUMASK
OP
Operator
BSC6900
OperatorType
OppositeTrchType
BSC6900
OptionalIESendSwitch
BSC6900
OPTM
BSC6900
OrientOfMajorAxis
OT
OtdoaActivateFlag
OTDOAMethodType
BSC6900
OverLayMobilityFlag
BSC6900
OWNERSHIP
BSC6900
OWNERSHIP
BSC6900
PAGECTHD
PAGERTHD
PAGESW
PATHCHK
PATHID
AAL2 path ID
BSC6900
PATHID
IP path ID
BSC6900
PATHID
AAL2 path ID
BSC6900
PATHID
IP path ID
BSC6900
PATHID
AAL2 path ID
BSC6900
PATHT
IP path type
BSC6900
PATTYPE
Patch type
BSC6900
PCHPower
PCH power[0.1dB]
BSC6900
PCPICHPower
PCPICHPowerPace
BSC6900
PCR
PcSwitch
PDTMRVALUE
PENDING timer
BSC6900
PeerCellId
Peer Cell ID
BSC6900
PEERIP
Peer IP address
BSC6900
PEERIP
Peer IP address
BSC6900
PEERIP
Peer IP address
BSC6900
PEERIP
Peer IP address
BSC6900
PEERIP1
PEERIP2
PEERIPADDR
Peer IP address
BSC6900
PEERIPADDR
Peer IP address
BSC6900
PEERIPADDR
Peer IP address
BSC6900
PEERIPADDR
Peer IP address
BSC6900
PeerIsValid
BSC6900
PEERMASK
BSC6900
PeerNodebId
PEERPN
PeerRncId
Peer RNC ID
BSC6900
PeerSN
BSC6900
PeerSRN
BSC6900
PeerSSN
PEERT
Peer type
BSC6900
Inter-Rat HO physical PenaltyTimeForPhyChFai channel failure l penalty timer[s] BSC6900 Inter-RAT Penalty timer length[s] Pending time after trigger 4A[ms] Pending time after trigger 4B[ms] Event A pending time after trigger
PenaltyTimer
BSC6900
PendingTime4A
BSC6900
PendingTime4B
BSC6900
PendingTimeA
BSC6900
PendingTimeB
BSC6900
PERIOD
BSC6900
PeriodFor2B
PeriodFor2C
PeriodFor3A
PeriodFor3C
1A event to PeriodMRReportNumfor1 periodical rpt A number 1C event to PeriodMRReportNumfor1 periodical rpt C number 1J event to PeriodMRReportNumfor1 periodical rpt J number Period common measure protect timer PeriodProtectTimerCoeff coeff
BSC6900
BSC6900
BSC6900
BSC6900
PersistScalingFactor
PFC
BSC6900
PFC
BSC6900
PHB
Per-Hop Behavior
BSC6900
PHB
PHB
BSC6900
PhyChId
PRACH ID
BSC6900
PhyChId
AICH ID
BSC6900
PhyChId
SCCPCH ID
BSC6900
PhyChId
PCCPCH ID
BSC6900
PhyChId
SCCPCH ID
BSC6900
PhyChId
PCPICH ID
BSC6900
PhyChId
PRACH ID
BSC6900
PhyChId
PSCH ID
BSC6900
PhyChId
SSCH ID
BSC6900
PhyChIdforMcch
BSC6900
PICHId
PICH ID
BSC6900
PICHMode
PICH mode
BSC6900
PICHPowerOffset
BSC6900
PIUSN
Interface Board Slot No. BSC6900 Private Key Password Enabled State BSC6900
PKPEnableSta
PKTCOUNT
PKT Count
BSC6900
PKTLEN
PKTMAXLEN
BSC6900
PKTSIZE
PKTSIZE
PKT Size
BSC6900
PlmnValTagMax
BSC6900
PlmnValTagMin
BSC6900
PLPRD
Packet lost measure period [100ms] BSC6900 Packet discard threshold[0.00 1] BSC6900 Performance monitor control threshold BSC6900 Performance monitor control threshold BSC6900 Performance monitor restore threshold BSC6900 Performance monitor restore threshold BSC6900 Performance monitoring flow control switch BSC6900
PLTH
PMCTHD
PMCTHD
PMRTHD
PMRTHD
PMSW
PN
Port No.
BSC6900
PN
Port No.
BSC6900
PN
Port No.
BSC6900
PN
Port No.
BSC6900
PN
Port No.
BSC6900
PN
Port No.
BSC6900
PN
Port No.
BSC6900
PN
Port No.
BSC6900
PN
Port No.
BSC6900
PN
Port No.
BSC6900
PN
Port No.
BSC6900
PN
Port No.
BSC6900
PN
BSC6900
PN
Port No.
BSC6900
PN
Port No.
BSC6900
POINTDESINFO
POINTNAME
PollTimerLen
BSC6900
POLLTMR
Timer_Poll
BSC6900
Port
Destination Port
BSC6900
PORTPROTYPE
BSC6900
PORTTYPE
Port Type
BSC6900
POWER_RELAY1
BSC6900
POWER_RELAY2
BSC6900
POWER_RELAY3
BSC6900
POWER_RELAY4
BSC6900
POWER_RELAY5
BSC6900
POWER_RELAY6
BSC6900
PowerOffsetPpm
BSC6900
PowerRampStep
BSC6900
PPPLNKN
BSC6900
PPPLNKN
BSC6900
PPPLNKN
BSC6900
PPPMUX
PPP mux
BSC6900
PQNUM
PRACHPhyChId
PRACH ID
BSC6900
PrdReportInterval
PreambleRetransMax
PreambleSignatures
BSC6900
PreemptAlgoSwitch
BSC6900
PreemptRefArpSwitch
PRINTCTHD
BSC6900
PRINTCTHD
BSC6900
PRINTRTHD
BSC6900
PRINTRTHD
BSC6900
PRINTSW
PRIORITY
Route priority
BSC6900
PRIORITY
PRIORITY
Priority
BSC6900
Priority
BSC6900
PriorityReference
BSC6900
Service priority of HSDPA PriorityServiceForHSDPA service BSC6900 Service priority of HSUPA PriorityServiceForHSUPA service BSC6900 Service priority PriorityServiceForR99NR of R99 NRT T service BSC6900 Service priority of R99 RT PriorityServiceForR99RT service BSC6900
PrivKey
BSC6900
ProcessDuration
Processing duration
BSC6900
PROCESSSWITCH
PROT
BSC6900
ProtectTmrForBac
BSC6900
ProtectTmrForCon
ProtectTmrForImsSig
BSC6900
ProtectTmrForInt
BSC6900
ProtectTmrForStr
BSC6900
PS
Port select
BSC6900
PS
Port select
BSC6900
PS
BSC6900
PsBeProcType
BSC6900
PSBKGDL
UMTS R99 PS background service downlink factor BSC6900 R99 PS background primary path
PSBKGPRIPATH
BSC6900
PSBKGPRITH
R99 PS background pri path load threshold BSC6900 R99 PS background secondary path
PSBKGSECPATH
BSC6900
PSBKGSECWHT
R99 PS background pri sec path load ratio threshold BSC6900 UMTS R99 PS background service uplink factor BSC6900
PSBKGUL
PSCHPower
PSCONVDL
UMTS R99 PS conversational service downlink factor BSC6900 R99 PS conversational primary path BSC6900 R99 PS conversational pri path load threshold BSC6900 R99 PS conversational secondary path PS BSC6900 R99 conversational pri sec path load ratio threshold BSC6900 UMTS R99 PS conversational service uplink factor BSC6900 DL primary scrambling code DL primary scrambling code
PSCONVPRIPATH
PSCONVPRITH
PSCONVSECPATH
PSCONVSECWHT
PSCONVUL
PScrambCode
BSC6900
PScrambCode
BSC6900
BSC6900
R99 PS high interactive pri PSHIGHINTERACTSEC sec path load WHT ratio threshold BSC6900 PS domain Reloc GSM load THD
PSHOOut2GloadThd
BSC6900
PsInactTmrForBac
BSC6900
PsInactTmrForCon
PSInactTmrForImsSig
BSC6900
PsInactTmrForInt
BSC6900
PsInactTmrForStr
BSC6900
PsInfoUpdFlag
PS Information Update Switch BSC6900 PS Information Update Protection Timer BSC6900 UMTS R99 PS interactive service downlink factor BSC6900 UMTS R99 PS interactive service uplink factor BSC6900 R99 PS high PRI interactive primary path BSC6900 R99 PS high PRI interactive secondary path BSC6900 R99 PS low PRI interactive primary path BSC6900 R99 PS low PRI interactive secondary path BSC6900
PsInfoUpdTmr
PSINTERDL
PSINTERUL
PSINTHGHPRIPATH
PSINTHGHSECPATH
PSINTLOWPRIPATH
PSINTLOWSECPATH
PSINTMIDPRIPATH
R99 PS middle PRI interactive primary path BSC6900 R99 PS middle PRI interactive secondary path BSC6900
PSINTMIDSECPATH
BSC6900
PSLOWINTERACTSEC WHT
R99 PS low interactive pri sec path load ratio threshold BSC6900
BSC6900
R99 PS mid pri PSMIDINTERACTSECW sec path load HT ratio threshold BSC6900 Feature Supporting Mode of PS Domain
PsNriCfgMode
BSC6900
PSNRILength
BSC6900
BSC6900
PsRabEstAttMinNum
Threshold of PS RAB Setup Successful PsRabEstSuccRatioThd Ratio[%] BSC6900 Minimum Number of PS Call Release BSC6900
PsRabRelMinNum
PsRestriction
PsRestriction
PSServiceHOSwitch
BSC6900
PSSTRMDL
UMTS R99 PS streaming service downlink factor BSC6900 R99 PS streaming primary path R99 PS streaming pri path load threshold R99 PS streaming secondary path
PSSTRMPRIPATH
BSC6900
PSSTRMPRITH
BSC6900
PSSTRMSECPATH
BSC6900
PSSTRMSECWHT
R99 PS streaming pri sec path load ratio threshold BSC6900 UMTS R99 PS streaming service uplink factor BSC6900 PS rate negotiation switch
PSSTRMUL
PsSwitch
BSC6900
Psthroughput
PSW
PT
Port Type
BSC6900
PT
Port
BSC6900
PTCODE
Line code
BSC6900
PTIP
PTIPMASK
PtmNullStrmPasiSwitch
BSC6900
PtmPreemptSwitch
BSC6900
PtmStrmPasiSwitch
BSC6900
PTRXT
PTTXT
BSC6900
PTTYPE
Frame Structure
BSC6900
PTYPE
Port type
BSC6900
PubCert
PucAvgFilterLen
PucPeriodTimerLen
BSC6900
PunishTime
PWD
BSC6900
PWD
BSC6900
PwdMinLen
BSC6900
PWRALMSSW1
BSC6900
PWRALMSSW2
PwrCtrlAlg
Q0MINDSCP
BSC6900
Q1MINDSCP
BSC6900
Q2MINDSCP
BSC6900
Q3MINDSCP
BSC6900
Q4MINDSCP
BSC6900
QAAL2VER
Qaal2 Protocol Version BSC6900 Quality threshold for HCS reselection Quality
Qhcs
BSC6900
Qhcs
threshold for HCS reselection[dB/ dBm] BSC6900 Hysteresis 1for UE in CELL_FACH state BSC6900 Hysteresis 1 for UE in CELL_PCH or URA_PCH state BSC6900 Hysteresis 2 for UE in CELL_FACH state Hysteresis 2
Qhyst1sfach
Qhyst1spch
Qhyst2sfach
BSC6900
Qhyst2spch
Qoffset1sn
Qoffset1sn[dB] BSC6900
Qqualmin
BSC6900
Qqualmin
BSC6900
QqualminInd
BSC6900
Qrxlevmin
Min RX level[dBm]
BSC6900
Qrxlevmin
Min RX level[dBm]
BSC6900
Qrxlevmin
Min Rx level[2dBm] Min Rx level Extend Support Min Rx level Extend Support
BSC6900
QrxlevminExtSup
BSC6900
QrxlevminExtSup
BSC6900
QrxlevminInd
Min RX level ind Cell Selreselection quality measure Queue algorithm switch
BSC6900
QualMeas
BSC6900
QueueAlgoSwitch
BSC6900
QueueLen
BSC6900
RabIndex
BSC6900
RabIndex
Service parameter index Service parameter index Rab Modify Timer Length[s]
BSC6900
RabIndex
BSC6900
RabModifyTimerLen
BSC6900
RAC
BSC6900
RACHSubChNo
BSC6900
RafcTmr
Trafc[ms]
BSC6900
RANSharingSupport
BSC6900
RatCellType
RatcTmr
Tratc[ms]
BSC6900
RateMatchingAttr
RateMatchingAttr
RateRecoverTimerLen
BSC6900
RateRstrctCoef
BSC6900
RateRstrctTimerLen
BSC6900
RBPTYPE
Type of Rollback Point BSC6900 Wait RB reconfiguration response timer[ms] BSC6900 Wait RB release response timer[ms]
RbRecfgRspTmr
RbRelRspTmr
BSC6900
RbSetupRspTmr
RCDT
BSC6900
RDC
RecountingPeriod
BSC6900
RecoverCoef
BSC6900
RECOVERTHD
RED
Backup
BSC6900
ReDirBandInd
ReDirection target band indicator ReDirection target band indicator ReDirection target band indicator ReDirection target band indicator Redirection Factor Of LDR[%] Redirection Factor Of LDR[%] Redirection Factor Of Normal[%] Redirection Factor Of Normal[%]
BSC6900
ReDirBandInd
BSC6900
RedirBandInd
BSC6900
RedirBandInd
BSC6900
RedirFactorOfLDR
BSC6900
RedirFactorOfLDR
BSC6900
RedirFactorOfNorm
BSC6900
RedirFactorOfNorm
BSC6900
RedirSwitch
Redirection Switch
BSC6900
Redirection target downlink ReDirUARFCNDownlink UARFCN BSC6900 Redirection target downlink ReDirUARFCNDownlink UARFCN BSC6900 Redirection target downlink ReDirUARFCNDownlink UARFCN BSC6900
Redirection target downlink ReDirUARFCNDownlink UARFCN BSC6900 Redirection target uplink UARFCN Redirection target uplink UARFCN Redirection target uplink UARFCN Redirection target uplink UARFCN
ReDirUARFCNUplink
BSC6900
ReDirUARFCNUplink
BSC6900
ReDirUARFCNUplink
BSC6900
ReDirUARFCNUplink
BSC6900
Redirection target UL ReDirUARFCNUplinkInd frequency ind Redirection target UL frequency configuration ReDirUARFCNUplinkInd ind Redirection target UL frequency configuration ReDirUARFCNUplinkInd ind Redirection target UL frequency configuration ReDirUARFCNUplinkInd ind
BSC6900
BSC6900
BSC6900
BSC6900
REF2MCLKSRC
REF2MCLKSRCBAK
BSC6900
REF2MCLKSW1
REF2MCLKSW2
REFUSELOCALCLK
BSC6900
RegByFachSwitch
ReHostPolicy
RELINDTMR
Release indication timer BSC6900 Relocation another request timer[ms] Relocation Command timer[ms] Relocation commit timer[ms] Relocation data forwarding timer[ms] Relocation failed IU release command timer[ms] Relocation Iu release command timer[ms] Relocation mobile info confirmation timer[ms]
RelocAnotherTmr
BSC6900
RelocCmdTmr
BSC6900
RelocCommitTmr
BSC6900
RelocDataFwdTmr
BSC6900
RelocFailIuRelCmdTmr
BSC6900
RelocIuRelCmdTmr
BSC6900
RelocMobilConfTmr
BSC6900
RelocPhychRecfgTmr
Relocation PhyCh reconfiguration timer[ms] BSC6900 Relocation Inter-RAT HO completion timer[ms] BSC6900
RelocUtranHoCmpTmr
RELREQTMR
BSC6900
RelThdForDwnGrd
BSC6900
REMARK
Remark
BSC6900
REMARK
BSC6900
REMARK
BSC6900
RepeatNum
Repeat Number
BSC6900
RepeatPeriod
Repeat Period[s] 1A event to periodical rpt period[ms] 1C event to periodical rpt period[ms] 1J event to periodical rpt period[ms]
BSC6900
ReportIntervalfor1A
BSC6900
ReportIntervalfor1C
BSC6900
ReportIntervalfor1J
BSC6900
Req2GCap
Required 2G Capability Resource Audit control threshold Resource Audit control threshold Resource Audit restore threshold Resource Audit restore threshold
BSC6900
RESAUDITCTHD
BSC6900
RESAUDITCTHD
BSC6900
RESAUDITRTHD
BSC6900
RESAUDITRTHD
BSC6900
RESAUDITSW
Resource audit flow control switch BSC6900 CORRM Algo reserved switch 0 BSC6900 CORRM Algo reserved switch 1 BSC6900 CORRM Algo reserved U32 Para 0 BSC6900 CORRM Algo reserved U32 Para 1 BSC6900 CORRM Algo reserved U8 Para 0 BSC6900 CORRM Algo reserved U8 Para 1 BSC6900
ReservedSwitch0
ReservedSwitch1
ReservedU32Para0
ReservedU32Para1
ReservedU8Para0
ReservedU8Para1
RESETINTERVAL
RESREQTMR
Reset request timer BSC6900 Resume Broken Downloads Flag Sub-protocol negotiate out time[S] Sub-protocol negotiate out time[S]
REST
BSC6900
RESTARTTMR
BSC6900
RESTARTTMR
BSC6900
RestrictionType
Restriction Type
BSC6900
RESTYPE
ReTransRatioFilterCoef
re-TX measure filter coef BSC6900 BIT MAP of retry HSPA PLUS character
RetryCapability
BSC6900
RFT
Execute Interval
BSC6900
RlcMode
BSC6900
RLCN
Channel No.
BSC6900
RLCSize
RLC size[bit]
BSC6900
RlMaxDlPwr
RlMinDlPwr
RlRecfgReadyTmr
RlRelRspTmr
RL release timer[ms]
BSC6900
RlRstrTmr
RlSetupRspTmr
BSC6900
RNCID
RNC ID
BSC6900
RncId
RNC ID
BSC6900
RNCId
RNC ID
BSC6900
RNCIPADDR
BSC6900
RncPoolIndex
RncPoolName
RncProtclVer
BSC6900
RootCert
Root Certificate File Name BSC6900 Decrease rate alarm report threshold BSC6900 Cause of RRC connection establishment BSC6900 The minimum
RPTTHD
RrcCause
of Rrc connection request Per Threshold of RrcConnEstabAttMinNum CPUS. RRC Connection Setup RrcConnEstabSuccRatio Successful Thd Ratio[%] In Wait Time RRC Connection Reject Message[s]
BSC6900
BSC6900
RrcConnRejWaitTmr
BSC6900
RrcInitDtTmr
RRC initial DT timer[ms] BSC6900 RRC IU release command timer[ms] RRC paging type 1 response timer[ms]
RrcIuRelCmdTmr
BSC6900
RrcPaingType1Tmr
BSC6900
RrcRelRetranTmr
RrcRlcAckCmpTmr
RRC RLC completion acknowledgem ent timer[ms] BSC6900 RRC security mode completion timer[ms] RRC UE response timer[ms]
RrcSecrtModeCmpTmr
BSC6900
RrcUeRspTmr
BSC6900
RSCGRPFLAG
RSCGRPN
Rscgrp No. Resource Management Mode Resource management mode Resource management mode Resource Management Mode
BSC6900
RSCMNGMODE
BSC6900
RSCMNGMODE
BSC6900
RSCMNGMODE
BSC6900
RscMngMode
BSC6900
RSNDES
Lock Reason
BSC6900
RSPTMR
Timer_NoResponse
BSC6900
RSTF
BSC6900
RSTFUN
RstRsndNum
RsvdPara1
Reserved Parameter1
BSC6900
RsvdPara1
Reserved parameter 1
BSC6900
RsvdPara1
Reserved parameter 1
BSC6900
RsvdPara1
Reserved parameter 1
BSC6900
RsvdPara1
Reserved parameter 1
BSC6900
RSVDPARA1
Reserved Parameter 1
BSC6900
RsvdPara10
Reserved Parameter10
BSC6900
RSVDPARA10
RsvdPara11
Reserved Parameter11
BSC6900
RsvdPara12
Reserved Parameter12
BSC6900
RsvdPara13
Reserved Parameter13
BSC6900
RsvdPara14
Reserved Parameter14
BSC6900
RsvdPara15
Reserved Parameter15
BSC6900
RsvdPara16
Reserved Parameter16
BSC6900
RsvdPara2
Reserved Parameter2
BSC6900
RsvdPara2
Reserved parameter 2
BSC6900
RsvdPara2
Reserved parameter 2
BSC6900
RsvdPara2
Reserved parameter 2
BSC6900
RsvdPara2
Reserved parameter 2
BSC6900
RSVDPARA2
Reserved Parameter 2
BSC6900
RsvdPara3
Reserved Parameter3
BSC6900
RsvdPara3
Reserved parameter 3
BSC6900
RsvdPara3
Reserved parameter 3
BSC6900
RsvdPara3
Reserved parameter 3
BSC6900
RSVDPARA3
Reserved Parameter 3
BSC6900
RsvdPara4
Reserved Parameter4
BSC6900
RSVDPARA4
Reserved Parameter 4
BSC6900
RsvdPara5
Reserved Parameter5
BSC6900
RSVDPARA5
Reserved Parameter 5
BSC6900
RsvdPara6
Reserved Parameter6
BSC6900
RSVDPARA6
Reserved Parameter 6
BSC6900
RsvdPara7
Reserved Parameter7
BSC6900
RSVDPARA7
Reserved Parameter 7
BSC6900
RsvdPara8
Reserved Parameter8
BSC6900
RSVDPARA8
Reserved Parameter 8
BSC6900
RsvdPara9
Reserved Parameter9
BSC6900
RSVDPARA9
Reserved Parameter 9
BSC6900
RT
RTCONTEXT
Routing Context
BSC6900
RTCPBWRatio
Realtime CPC to E_FACH RtCpc2EFachStateTrans Transition Timer Timer[s] BSC6900 Realtime CPC to FACH Transition RtCpc2FStateTransTimer Timer[s] BSC6900
RTCPSwitch
BSC6900
RTDEST
BSC6900
RTDESTMASK
BSC6900
Realtime DCH or HSPA To FACH Transition RtDH2FStateTransTimer Timer[s] BSC6900 RT D/HSPA2F 4B Pending Time[ms] BSC6900 RT D/HSPA2F 4B Threshold[byte ] BSC6900
RtDH2FTvmPTAT
RtDH2FTvmThd
RtDH2FTvmTimeToTrig
RtEFach2CpcTvmThd
RT E_FACH2CPC RtEFach2CpcTvmTimeT _HSPA 4A oTrig Time[ms] BSC6900 RT E_FACH2D/H SPA 4A Threshold[byte ] BSC6900
RtEFach2DHTvmThd
RtF2CpcTvmThd
RtF2DHTvmThd
RtF2DHTvmTimeToTrig
RTOALPHA
BSC6900
RTOBETA
BSC6900
RTOINIT
BSC6900
RTOMAX
BSC6900
RTOMIN
RTX
Route index
BSC6900
RUS
BSC6900
RUSPRD
BSC6900
RXBW
Backward Bandwidth
BSC6900
RxBw
BSC6900
RXBW
BSC6900
RXTRFX
BSC6900
RXTRFX
BSC6900
RXTRFX
BSC6900
RXTRFX
BSC6900
RxTxtoTrig6F
RxTxtoTrig6G
S1VALUE
S1 Value
BSC6900
SAALLNKN
SAALLNKT
SAALTMR
BSC6900
SAC
BSC6900
SATELLITEIND
SCCPCHOffset
SCCPCH offset
BSC6900
SCMD
Command String
BSC6900
SCR
BSC6900
ScrambCode
Scrambling code
BSC6900
SCRAMBLESW
Scramble Switch
BSC6900
SCRAMBLESW
Scramble switch
BSC6900
SCSN
SCTPLNKN
SD
Start Date
BSC6900
SD
Start Date
BSC6900
SD
Start Date
BSC6900
SD
BSC6900
SDALMTHD
SD Alarm Threshold
BSC6900
SDAY
Start date
BSC6900
SDENABLE
SD Enable
BSC6900
SDSFPRI
Seed
SelectType
Detect type
BSC6900
SeqOfUserRel
BSC6900
SERCMDPORT
The Command Port of FTP Server BSC6900 The Source Date Port of FTP Server
SERDATAPORT
BSC6900
ServerIP
ServiceBitRate
BSC6900
ServiceDiffDrdSwitch
Service differential drd switch BSC6900 Service differential drd switch BSC6900
ServiceDiffDrdSwitch
ServiceId
Service ID
BSC6900
ServiceInd
CN domain indication
BSC6900
ServiceName
ServiceType
Service Type
BSC6900
SETOBJECT
BSC6900
SGSNFLG
SGSN FLAG
BSC6900
BSC6900
SharingType
BSC6900
SHCSRat
SHInd
BSC6900
SHLDFLG
BSC6900
ShoFailNumForDwnGrd
BSC6900
ShoFailPeriod
Max evaluation period of SHO failure[s] BSC6900 Min Quality THD For SHO[dB] Min quality THD for SHO[dB]
SHOQualmin
BSC6900
SHOQualmin
BSC6900
SHOTRIG
SIB11Ind
SIB11 Indicator
BSC6900
SIB12Ind
SIB12 Indicator
BSC6900
SibCfgBitMap
SIB switch
BSC6900
SigChType
SIGLKSX
SIGLKSX
SIGLNKID
Signaling link ID
BSC6900
SigRbInd
SIGSLC
Signalling link code BSC6900 Max Mode Of Narrowband AMRC For Silver Users Max Mode Of Wideband AMRC For Silver Users
SilverMaxMode
BSC6900
SilverMaxMode
BSC6900
SingalDlMBR
SingalUlMBR
SIPADDR
Source IP address
BSC6900
SIPADDR
Source IP address
BSC6900
SIPDL
SIPPRIPATH
BSC6900
SIPPRITH
IMS Signal pri path load threshold BSC6900 IMS SRB secondary path
SIPSECPATH
BSC6900
SIPSECWHT
SIPUL
BSC6900
SlimitSearchRat
SlotFormat
Slot format
BSC6900
SlotFormat1
Slot format 1
BSC6900
SlotFormat2
Slot format 2
BSC6900
SlotFormat3
Slot format 3
BSC6900
SlotFormat4
Slot format 4 Number of PRACH slot formats SS and LCS page control threshold SS and LCS page restore threshold
BSC6900
SlotFormatNum
BSC6900
SLPAGECTHD
BSC6900
SLPAGERTHD
BSC6900
SLSMASK
BSC6900
SM
StartType
BSC6900
SmlcMethod
SMOKE_MASK
SMONTH
Start month SMS page control threshold SMS page restore threshold
BSC6900
SMPAGECTHD
BSC6900
SMPAGERTHD
BSC6900
SMS RRC conn share CPU control SMRRCCONNCCPUTHD threshold SMS RRC conn share SMRRCCONNCMSGTH msg control D threshold SMS RRC conn share CPU restore SMRRCCONNRCPUTHD threshold SMS RRC conn share SMRRCCONNRMSGTH msg restore D threshold
BSC6900
BSC6900
BSC6900
BSC6900
SMWINDOW
Filter window
BSC6900
SN
Slot No.
BSC6900
SN
Slot No.
BSC6900
SN
Slot No.
BSC6900
SN
Slot No.
BSC6900
SN
Slot No
BSC6900
SN
Slot No.
BSC6900
SN
Slot No.
BSC6900
SN
Slot No.
BSC6900
SN
Slot No.
BSC6900
SN
Slot No.
BSC6900
SN
SN
Slot No.
BSC6900
SN
Slot No.
BSC6900
SNAC
SnaExistInd
BSC6900
SndLdInfo2GsmInd
SP
BSC6900
SPC
BSC6900
SPCBITS
SPCDNF
BSC6900
SpdEstSwitch
SPDF
BSC6900
SPEED
BSC6900
SpgId
SpgId
SPI
BSC6900
SPI
BSC6900
SPORTNO
BSC6900
SPTSTATEFWL
Support State Firewall BSC6900 Load level division threshold 1 Load level division hysteresis Load level division threshold 2
SpucHeavy
BSC6900
SpucHyst
BSC6900
SpucLight
BSC6900
SPX
OSP index
BSC6900
SrbChlType
BSC6900
BSC6900
SRBDL
SRBGBR
BSC6900
SRBMBR
BSC6900
SRBPRIPATH
BSC6900
SRBPRITH
SRBSECPATH
BSC6900
SRBSECWHT
Signal pri sec path load ratio threshold BSC6900 UMTS SRB service uplink factor BSC6900
SRBUL
SRCF
BSC6900
SRCGRD
BSC6900
SRCGRD
BSC6900
SRCMEPID
MEP ID
BSC6900
SRCPORTNO
BSC6900
SRCT
BSC6900
SRCTSMASK
SRECTMR
SRN
Subrack No.
BSC6900
SRN
Subrack No.
BSC6900
SRN
Subrack No.
BSC6900
SRN
Subrack No.
BSC6900
SRN
Subrack No.
BSC6900
SRN
Subrack No.
BSC6900
SRN
Subrack No.
BSC6900
SRN
Subrack No.
BSC6900
SRN
Subrack No.
BSC6900
SRN
Subrack No.
BSC6900
SRN
Subrack No.
BSC6900
SRName
Subrack name BSC6900 Srnc Parameter for BE Downlink RLC QOS BSC6900
SrncBeDlRlcQosSwitch
SRNS relocationallowed traffic SrnsRabCnDomainType type BSC6900 Estimated nonmeasurement delay offset[ms] BSC6900 SRNS relocation expiry time[s]
SRNSRDelayOffset
SRNSRExpiryTime
BSC6900
BSC6900
SrnsrSeparateDuration
SrnsrSwitch
BSC6900
SRNSRTrigTimer
SRT
Subrack type
BSC6900
SRTORD
Sort Order
BSC6900
SSCHPower
occupancy alarm SSCPUAVEUSAGEALM clearance THD threshold CPU occupancy SSCPUMAXUSAGEALM alarm THD threshold
BSC6900
BSC6900
Ssd
BSC6900
occupancy alarm SSDSPAVEUSAGEALM clearance THD threshold DSP occupancy SSDSPMAXUSAGEALM alarm THD threshold
BSC6900
BSC6900
SsearchHCS
HCS cell reselection threshold[2dB] BSC6900 Inter-RAT cell reselection threshold[2dB] BSC6900
SsearchRat
SSN
SSN
SSN
SSSN
BSC6900
ST
StartTime
BSC6900
ST
Start Time
BSC6900
ST
Start Time
BSC6900
ST
Start Time
BSC6900
ST
Start Time
BSC6900
ST
Start Time
BSC6900
ST
Service type
BSC6900
StaBlkNum5A
STARTAID
Start Alarm ID BSC6900 GPS Frame Timing Active Flag Cell First Dynamic ShutDown Interval Start Time Cell Second Dynamic ShutDown Interval Start Time
StartFlag
BSC6900
StartTime1
BSC6900
StartTime2
BSC6900
StartTime3
BSC6900
StateIndTmr
StateIndTMR
STATLEN
MaxSTAT
BSC6900
STD
Start Date
BSC6900
STP
BSC6900
StreamDlMBR
STREAMGBR
BSC6900
Rate threshold of Streaming StreamHsupa2msTtiRate on 2ms TTI of Ths HSUPA[kbit/s] BSC6900 Streaming MAC-c flow MBR
STREAMMBR
BSC6900
StreamUlMBR
STT
Start Time
BSC6900
STTDInd
STTDSupInd
STTDSupInd
SubflowIndex
SUBFRAMELEN
SUBID
Subtask ID
BSC6900
SUBNET
Subnet No.
BSC6900
SupBmc
CBS support
BSC6900
SuppDlSf512
Support downlink DPCH SF 512 BSC6900 Support DPC mode Change ind BSC6900 Support DPC mode TRIPLET
SuppDpcmodeChgFlag
SuppDpcTriplet
BSC6900
SuppIurCch
BSC6900
SupportCRType
CR support type
BSC6900
SuppPSHOFlag
Support PS realtime traffic SuppPsRtServOnHsdpa on HSDPA BSC6900 Inter-RAT cell support RIM indicator BSC6900
SuppRIMFlag
SW
BSC6900
SW
BSC6900
SWEEK
Start week
BSC6900
Switch
Port switch
BSC6900
SWITCH
Self-healing Switch
BSC6900
SWITCH
SWITCH
BSC6900
SWITCHBACKFLAG
SWITCHBACKHBNUM
BSC6900
SwitchParameter1
SwitchParameter10
SwitchParameter2
SwitchParameter3
SwitchParameter4
SwitchParameter5
SwitchParameter6
SwitchParameter7
SwitchParameter8
SwitchParameter9
SWOP
SWSEQ
BSC6900
SYNFLAG
SysAmrRrcNum
BSC6900
SYSCONTACT
SYSDESC
System description HiPri_RRC Number per Second for System PS resume timer after SYSHO[min]
BSC6900
SysHighPriRrcNum
BSC6900
SysHoPsResumeTmr
BSC6900
SYSLOCATION
System Location
BSC6900
SYSOBJECTID
NE Name
BSC6900
SysRrcRejNum
SYSSERVICES
System services
BSC6900
SysTotalRrcNumThd
System Call Shock Trigger Threshold BSC6900 Signalling route set test timer
T10TMR
BSC6900
T12TMR
T13TMR
T14TMR
Inhibition ACK timer BSC6900 Link realignment timer Time-control changeover timer
T17TMR
BSC6900
T1TMR
BSC6900
T22TMR
BSC6900
T23TMR
T2TMR
BSC6900
T300
T302
T304
T305
T307
Timer 307[s]
BSC6900
T308
T309
Timer 309[s]
BSC6900
T312
Timer 312[s]
BSC6900
T313
Timer 313[s]
BSC6900
T314
Timer 314[s]
BSC6900
T315
Timer 315[s]
BSC6900
T316
Timer 316[s]
BSC6900
T3212
T381
Timer 381[ms] BSC6900 Time-control changeback timer Changeover ACK first attempt timer Changeover ACK second attempt timer
T3TMR
BSC6900
T4TMR
BSC6900
T5TMR
BSC6900
T8TMR
Transmission prohibited inhibition timer BSC6900 Target RLC Retransmissio n rate[0.1%] Inter-freq CS BSC6900 target frequency trigger Ec/No THD[dB] CS Inter-freq target frequency trigger RSCP THD[dBm] Inter-freq H target frequency trigger Ec/No THD[dB] H Inter-freq
TagetRlcRetrans
TargetFreqCsThdEcN0
BSC6900
TargetFreqCsThdRscp
BSC6900
TargetFreqHThdEcN0
BSC6900
TargetFreqHThdRscp
PS target frequency TargetFreqR99PsThdEc trigger Ec/No N0 THD[dB] R99 BSC6900 Inter-freq PS target frequency TargetFreqR99PsThdRsc trigger RSCP p THD[dBm]
BSC6900
TargetRatCsThd
BSC6900
TargetRatHThd
BSC6900
TargetRatR99PsThd
TB
BSC6900
TbIndexNum
TbNumber1
TbNumber1
TbNumber1
TbNumber2
TbNumber2
TbNumber2
TbNumber3
TbSizeIndex1
TbSizeIndex2
TbSizeIndex3
TbSizeIndex4
TC
Test code
BSC6900
TCell
Time offset[chip]
BSC6900
TCellId
Target cell ID
BSC6900
TCLEN
BSC6900
TCRmax
Time for evaluating max cell reselection BSC6900 Time before revert to lowmobility meas BSC6900
TCrmaxHyst
Tcrmaxhystnonhcs
Tcrmaxnonhcs
TCycleSlow
BSC6900
TEMP_MASK
BSC6900
TEMP_THD_HIGH
Upper Limit of Temperature Alarm BSC6900 Lower Limit of Temperature Alarm BSC6900 HCS Cell Reselect TempOffset1[d B] BSC6900 HCS Cell Reselect TempOffset2[d B] BSC6900 AMR Event E Reporting Period[ms] BE Event E Reporting Period[ms] BE Event F Reporting Period[ms]
TEMP_THD_LOW
TempOffset1
TempOffset2
TenMsecForAmrE
BSC6900
TenMsecForBeE
BSC6900
TenMsecForBeF
BSC6900
DL basic meas TenMsecForDlBasicMeas rprt cycle BSC6900 DL OLC meas rprt cycle[10ms] BSC6900
TenMsecForDlOlcMeas
TenMsecForDlOlcMeas
HSDPA bit rate TenMsecForHsdpaPrvid meas RateMeas cycle[10ms] BSC6900 HSDPA need TenMsecForHsdpaPwrM pwr meas eas cycle[10ms]
BSC6900
TenMsecForUlOlcMeas
UL OLC meas rprt cycle BSC6900 VP Event E Reporting Period[ms] Time window for UE fast speed decision[s]
TenMsecForVpE
BSC6900
TFastSpdEst
BSC6900
TFCIpresence
BSC6900
TFsNumber
TFsNumber
TG
Target OMU
BSC6900
TGWID
TGW ID
BSC6900
TGWIPOAMIP
TGWIPOAMMASK
TGWPEERSN
BSC6900
TGWPEERSRN
BSC6900
Thd5A
Event 5A Threshold
BSC6900
ThdEa
Event Ea Relative Threshold[0.5d B] BSC6900 Event Eb Relative Threshold[0.5d B] BSC6900 Traffic Handling Priority
ThdEb
THP
BSC6900
THP10Class
User Class of Traffic Handler Priority 10 BSC6900 User Class of Traffic Handler Priority 11 BSC6900 User Class of Traffic Handler Priority 12 BSC6900 User Class of Traffic Handler Priority 13 BSC6900
THP11Class
THP12Class
THP13Class
THP14Class
User Class of Traffic Handler Priority 14 BSC6900 User Class of Traffic Handler Priority 15 BSC6900 User Class of Traffic Handler Priority 1 BSC6900 User Class of Traffic Handler Priority 2 BSC6900 User Class of Traffic Handler Priority 3 BSC6900 User Class of Traffic Handler Priority 4 BSC6900 User Class of Traffic Handler Priority 5 BSC6900 User Class of Traffic Handler Priority 6 BSC6900 User Class of Traffic Handler Priority 7 BSC6900 User Class of Traffic Handler Priority 8 BSC6900 User Class of Traffic Handler Priority 9 BSC6900
THP15Class
THP1Class
THP2Class
THP3Class
THP4Class
THP5Class
THP6Class
THP7Class
THP8Class
THP9Class
THPClass
THTYPE
TIME
Time Limit
BSC6900
TIME
Time
BSC6900
TIMEOUT
Reply TimeOut[ms]
BSC6900
TIMEOUT
Reply TimeOut[ms]
BSC6900
Timeout
Time Out
BSC6900
TIMEOUT
Time Out
BSC6900
Timer
Block time[s]
BSC6900
TIMERCU
Timer_CU timer
BSC6900
TIMES
BSC6900
TimeToInterfreqHO
Inter-freq coverage handover delay trig time BSC6900 Time to start re-TX monitor[ms]
TimeToMoniter
BSC6900
TimeToTrig2B
2B event trigger delay time[ms] 2D event trigger delay time[ms] 2F event trigger delay time[ms]
BSC6900
TimeToTrig2D
BSC6900
TimeToTrig2F
BSC6900
Time to trigger for non-verified TimeToTrigForNonVerify GSM cell[ms] BSC6900 HHO period TimeToTrigForPrdInterFr trigger delay eq time[ms]
BSC6900
TimeToTrigForVerify
TimetoTrigger4A
TimetoTrigger4B
TimeToTriggerA
TimeToTriggerB
TL
Time Limit
BSC6900
TM
TM1
TM2
TM3
TM4
TM5
TMI
TRMMAP ID Bronze user TRMMAP index Gold user TRMMAP index Silver user TRMMAP index Upper time threshold of raised fault Lower time threshold of raised fault
BSC6900
TMIBRZ
BSC6900
TMIGLD
BSC6900
TMISLV
BSC6900
TMRISTHRD
BSC6900
TMSTLTHRD
BSC6900
TMT1TMR
TMT2TMR
TNAME
Data Table
BSC6900
TnlBearerType
BSC6900
TnlBearerType
BSC6900
TnlBearerType
BSC6900
TO
AdjustMethod BSC6900 Time of arrival window endpoint[ms] BSC6900 Time of arrival window endpoint[ms] BSC6900 Time of arrival window startpoint[ms] BSC6900 Time of arrival window startpoint[ms] BSC6900 Cell Dynamic ShutDown Total User number Threshold
ToAWE
ToAWE
ToAWS
ToAWS
TotalUserNumThd
BSC6900
TP
Log Type
BSC6900
TpenaltyHcsReselect
BSC6900
TRACECTHD
Debug tracking control threshold BSC6900 Debug tracking control threshold BSC6900 Debug tracking restore threshold BSC6900 Debug tracking restore threshold BSC6900
TRACECTHD
TRACERTHD
TRACERTHD
TRACESW
TrafficClass
Traffic Class
BSC6900
TrafficClass
Traffic Class
BSC6900
TrafficClass
Traffic Class
BSC6900
TrafficClass
Traffic class
BSC6900
TrafficClass
Traffic class
BSC6900
TrafficClass
Traffic class
BSC6900
TrafficClass
Traffic class
BSC6900
TrafficType
Traffic Type
BSC6900
TrafficType
Traffic Type
BSC6900
TRAMODE
Traffic mode
BSC6900
TransCchUserNum
TRANSDELAY
BSC6900
TRANST
TRANST
Transport Type BSC6900 Transport Type of the adjacent node and interface type BSC6900
TRANST
TRANST
TRANST
TrChId
BCH ID
BSC6900
TrChId
FACH ID
BSC6900
TrChId
PCH ID
BSC6900
TrChId
RACH ID
BSC6900
TrchType
BSC6900
TrchType
BSC6900
TrchType
BSC6900
TRelateLength
Treselections
Reselection delay time Reselection delay time for UE in CELL_FACH state[0.2s] Reselection delay time for UE in PCH state
BSC6900
Treselectionsfach
BSC6900
Treselectionspch
BSC6900
TRFX
BSC6900
TrigTime1A
BSC6900
TrigTime1A
1A event trigger delay time[ms] 1B Event Trigger Delay Time[ms] 1B event trigger delay time[ms] 1C event trigger delay time[ms] 1D event trigger delay time[ms] 1F event trigger delay time[ms] 1J event trigger delay time[ms] 2C event trigger delay time[ms] 2D event trigger delay time[ms] 2F event trigger delay time[ms] 3A event trigger delay time[ms] 3C event trigger delay time[ms]
BSC6900
TrigTime1B
BSC6900
TrigTime1B
BSC6900
TrigTime1C
BSC6900
TrigTime1D
BSC6900
TrigTime1F
BSC6900
TrigTime1J
BSC6900
TrigTime2C
BSC6900
TrigTime2D
BSC6900
TrigTime2F
BSC6900
TrigTime3A
BSC6900
TrigTime3C
BSC6900
TrigTime6F
BSC6900
TrigTime6G
BSC6900
TRKLNKPN
TRKLNKSN
TRKN
BSC6900
TRlFailure
BSC6900
TRMLOADTHINDEX
TRMLOADTHINDEX
TRMLOADTHINDEX
TRMLOADTHINDEX
TRMLOADTHINDEX
TRMLOADTHINDEX
TRMLOADTHINDEX
TRMLOADTHINDEX
TRMLOADTHINDEX
TRMLOADTHINDEX
TRncId
BSC6900
TRUNKN
BSC6900
TRUNKN
BSC6900
TRUNKN
Trunk No.
BSC6900
TS
BSC6900
TS16ENABLE
16TimeSlot switch
BSC6900
TSBITMAP
BSC6900
TSBITMAP
BSC6900
TSBITMAP
BSC6900
TSCROSSX
TSKN
BSC6900
TSlowSpdEst
BSC6900
TstImsi
BSC6900
TSTLEN
Test Len[s]
BSC6900
TstSwitch
MGWTST SWITCH
BSC6900
TTL
Time to Live
BSC6900
TTL
PKT TTL
BSC6900
TXBW
Forward Bandwidth
BSC6900
TxBw
BSC6900
TXBW
BSC6900
TxDiversityInd
TX diversity indication
BSC6900
TxDiversityInd
TX diversity indication
BSC6900
TXINT
BSC6900
TXINT
BSC6900
TXTRFX
BSC6900
TXTRFX
BSC6900
TXTRFX
BSC6900
TXTRFX
BSC6900
TYPE
Finish Type
BSC6900
TYPE
Application Type
BSC6900
UARFCNDownlink
Downlink UARFCN
BSC6900
UARFCNDownlink
Downlink UARFCN
BSC6900
UARFCNUplink
Uplink UARFCN
BSC6900
UARFCNUplink
Uplink UARFCN
BSC6900
UARFCNUplinkInd
UL frequency ind
BSC6900
UARFCNUplinkInd
UL frequency ind
BSC6900
UBLREQTMR
BSC6900
UDPMUXMODRECV
BSC6900
UDPMUXMODSEND
BSC6900
UE-assisted AUeAssAgpsAssDataSwitc GPS Data h Send switch BSC6900 UE-based AUeBasAgpsAssDataSwitc GPS Data h Send Switch UE capability enquiry response timer[ms] UE counter check response timer[ms]
BSC6900
UeCapEnqRspTmr
BSC6900
UeCntCheckRspTmr
BSC6900
UG
UINTTIME
Unit time[ms]
BSC6900
UL
Upper Limit
BSC6900
UlAmrConvAF
UlAmrTrigTime6A1
UlAmrTrigTime6A2
UlAmrTrigTime6B1
UlAmrTrigTime6B2
UlAmrTrigTime6D
BSC6900
UlBackgroundAF
UL basic common UlBasicCommMeasFilter measure filter Coeff coeff BSC6900 UL BE traffic DCH decision threshold[kbit/s ] BSC6900 UL BE traffic DCH decision threshold[kbit/s ] BSC6900
UlBeTraffDecThs
UlBeTraffDecThs
UlBeTraffInitBitrate
BSC6900
UlBeTraffThsOnHsupa
UlBeTrigTime6A1
UlBeTrigTime6A2
UlBeTrigTime6B1
UlBeTrigTime6B2
UlBeTrigTime6D
BSC6900
UlCacAvgFilterLen
UL CAC smoothing filter length BSC6900 UL common channel load reserved coefficient
UlCCHLoadFactor
BSC6900
UlCellTotalThd
UlCmMethod
BSC6900
UL CS should UlCSInterRatShouldBeH be ho user OUeNum number BSC6900 UL CS should UlCSInterRatShouldNotH not be HO user OUeNum number BSC6900 UL CS should UlCSInterRatShouldNotH not be ho user OUeNum number BSC6900 Uplink Bit Rate Threshold For DCCC[kbit/s] BSC6900
UlDcccRateThd
UlFpMode
BSC6900
UlFullCvrRate
BSC6900
UlGBR
UlHoCeResvSf
UlHsDpcchRsvdFactor
IMS signalling transmission UlIMSTransModeOnHsup mode on a HSUPA BSC6900 UL AF of R99 interactive service BSC6900 UL HO maximum bandwidth
UlInteractAF
UlInterFreqHoBWThd
BSC6900
BSC6900
UL LDR-AMR UlLdrAMRRateReduction rate reduction RabNum RAB number BSC6900 UL LDR smoothing filter length BSC6900
UlLdrAvgFilterLen
UL LDR-BE UlLdrBERateReductionR rate reduction abNum RAB number BSC6900 UL LDR-BE UlLdrBERateReductionR rate reduction abNum RAB number BSC6900 Ul LDR credit SF reserved threshold
UlLdrCreditSfResThd
BSC6900
UlLdrCreditSfResThd
UlLdrEighthAction
UlLdrFifthAction
BSC6900
UlLdrFifthAction
BSC6900
UlLdrFirstAction
BSC6900
UlLdrFirstAction
BSC6900
UlLdrFourthAction
UlLdrFourthAction
UL LDR un-ctrl UlLdrPsRTQosRenegRa RT Qos rebNum nego RAB num BSC6900 UL LDR un-ctrl UlLdrPsRTQosRenegRa RT Qos rebNum nego RAB num BSC6900 UL LDR release threshold
UlLdrRelThd
BSC6900
UlLdrSecondAction
UlLdrSecondAction
UlLdrSeventhAction
UlLdrSixthAction
BSC6900
UlLdrSixthAction
UlLdrThirdAction
BSC6900
UlLdrThirdAction
BSC6900
UlLdrTrigThd
UlMaxNumOfTfc
BSC6900
UlMeasFilterCoef
UL Measurement Filter Coefficient BSC6900 Uplink Mid Bit Rate Calculate Method BSC6900 Uplink Mid Bit Rate Threshold[kbit/ s] BSC6900
UlMidRateCalc
UlMidRateThd
UL Mode Change Timer UlModeChangeTimerLen Length[ms] BSC6900 UL Mode Change Timer UlModeChangeTimerLen Length[ms] BSC6900 UL AF of R99 non AMR conv service BSC6900 UL threshold of Conv AMR service BSC6900 UL handover access threshold
UlNonAmrConvAF
UlNonCtrlThdForAMR
UlNonCtrlThdForHo
BSC6900
UlNonCtrlThdForOther
UlOlcAvgFilterLen
UL OLC fast TF restrict RAB UlOlcFTFRstrctRabNum number BSC6900 UL OLC fast TF restrict times
UlOlcFTFRstrctTimes
BSC6900
UlOlcMeasFilterCoeff
UL overload measure filter coeff BSC6900 UL OLC release threshold UL OLC traff release RAB number
UlOlcRelThd
BSC6900
UlOlcTraffRelRabNum
BSC6900
UlOlcTrigHyst
UlOlcTrigThd
UL PS should UlPSInterRatShouldBeH be HO user OUeNum number BSC6900 UL PS should UlPSInterRatShouldBeH be ho user OUeNum number BSC6900 UL PS should UlPSInterRatShouldNotH not be HO user OUeNum number BSC6900 UL PS should UlPSInterRatShouldNotH not be ho user OUeNum number BSC6900
UlQosAmrAdjSwitch
BSC6900
InterFreq HO UlQosAmrInterFreqHoSw For Switch For itch Uplink AMR BSC6900 InterRat HO UlQosAmrInterRatHoSwit Switch For ch Uplink AMR
BSC6900
ULQosMcTimerLen
BSC6900
UlQosWAmrAdjSwitch
InterFreq HO UlQosWAmrInterFreqHo Switch For Switch Uplink WAMR BSC6900 InterRat HO UlQosWAmrInterRatHoS Switch For witch Uplink WAMR BSC6900 Uplink Rate Decrease Adjust Level Uplink Rate Increase Adjust Level
UlRateDnAdjLevel
BSC6900
UlRateUpAdjLevel
BSC6900
UlSFTurnPoint
UL SF threshold
BSC6900
UlSrbActFactor
UL AF of SRB BSC6900
BSC6900
UlStreamAF
UL AF of R99 Streaming service BSC6900 UL streaming traffic threshold on HSUPA[kbit/s] BSC6900 Streaming
UlStrThsOnHsupa
BSC6900
UlThd6A1
Uplink Event 6A1 Relative Threshold[dB] BSC6900 Uplink Event 6A2 Relative Threshold[dB] BSC6900 Uplink Event 6B1 Relative Threshold[dB] BSC6900 Uplink Event 6B2 Relative Threshold[dB] BSC6900 UL total equivalent user number BSC6900 UL closed loop power control step size[dB] BSC6900
UlThd6A2
UlThd6B1
UlThd6B2
UlTotalEqUserNum
UlTpcStepSize
UlVpTrigTime6A1
UlVpTrigTime6B1
UlVpTrigTime6D
BSC6900
UNBA
Support Balance Cell Center Uncertainty Altitude[m] Cell Center Uncertainty Altitude[ft]
BSC6900
UncertAltitude
BSC6900
UncertAltitudeImp
BSC6900
UncertSemiMajor
Cell Center Uncertainty Semi-major[m] BSC6900 Cell Center Uncertainty Semi-major[ft] BSC6900 Cell Center Uncertainty Semi-minor[m] BSC6900 Cell Center Uncertainty Semi-minor[ft] BSC6900
UncertSemiMajorImp
UncertSemiMinor
UncertSemiMinorImp
UNILNKN
BSC6900
UpLimitCountingTime
UPPERANI
BSC6900
UPPERGRPID
BSC6900
UPPERLP
The Upper logic port number The Upper Logic port Number
BSC6900
UPPERVP
BSC6900
URA1
URA ID 1
BSC6900
URA2
URA ID 2
BSC6900
URA3
URA ID 3
BSC6900
URA4
URA ID 4
BSC6900
URA5
URA ID 5
BSC6900
URA6
URA ID 6
BSC6900
URA7
URA ID 7
BSC6900
URA8
URA ID 8
BSC6900
URAId
URA ID
BSC6900
URAId
URA ID
BSC6900
URANUM
UsedFreqCSThdEcN0
URA number Inter-freq CS Used frequency trigger Ec/No THD[dB] CS Inter-RAT Used frequency trigger Ec/No THD[dB] CS Inter-freq Used frequency trigger RSCP THD[dBm]CS Inter-RAT Used frequency trigger RSCP THD[dBm] Inter-freq H Used frequency trigger Ec/No THD[dB] H Inter-RAT Used frequency trigger Ec/No THD[dB] H Inter-freq Used frequency trigger RSCP THD[dBm]H Inter-RAT Used frequency trigger RSCP THD[dBm]
BSC6900
BSC6900
UsedFreqCsThdEcN0
BSC6900
UsedFreqCSThdRSCP
BSC6900
UsedFreqCsThdRscp
BSC6900
UsedFreqHThdEcN0
BSC6900
UsedFreqHThdEcN0
BSC6900
UsedFreqHThdRSCP
BSC6900
UsedFreqHThdRscp
BSC6900
3A Used-Freq Measure UsedFreqMeasQuantityF Quantity for orQos3A Qos Inter-freq R99 BSC6900 PS Used frequency UsedFreqR99PsThdEcN trigger Ec/No 0 THD[dB] R99 BSC6900 Inter-RAT PS Used frequency UsedFreqR99PsThdEcN trigger Ec/No 0 THD[dB]
BSC6900
Inter-freq R99 PS Used frequency UsedFreqR99PsThdRSC trigger RSCP P THD[dBm]R99 BSC6900 Inter-RAT PS Used frequency trigger RSCP UsedFreqR99PsThdRscp THD[dBm]
BSC6900
UseMacehs
BSC6900
USENBLB2
UseOfHcs
Use of HCS
BSC6900
UseOfHcs
Use of HCS
BSC6900
UserPercentage
UserPercentag e BSC6900
Percentage of User Plane Sharing Out UserPlnSharingOutOffset Offset BSC6900 Percentage of User Plane Sharing Out threshold BSC6900
UserPlnSharingOutThd
UserPriority
User Priority
BSC6900
UserPriority
User Priority
BSC6900
UserPriority
User Priority
BSC6900
UserPriority
User Priority
BSC6900
USR
UT
Rate unit
BSC6900
VCI
Bearing VCI
BSC6900
VLANFlAG
VLANID Flag
BSC6900
VLANFLAG
Vlan Flag VLANID Flag of First Local IP address VLANID Flag of Second Local IP address
BSC6900
VLANFLAG1
BSC6900
VLANFlAG2
BSC6900
VLANID
VLAN ID.
BSC6900
VLANID
BSC6900
VLANID1
BSC6900
VLANID2
VLANPRI
VLAN Priority
BSC6900
VOICEDL
VOICEPRIPATH
BSC6900
VOICEPRITH
AMR voice pri path load threshold BSC6900 AMR voice secondary path
VOICESECPATH
BSC6900
VOICESECWHT
AMR voice pri sec path load ratio threshold BSC6900 UMTS AMR voice service uplink factor
VOICEUL
BSC6900
VoipChlType
VOIP channel type BSC6900 HSUPA TTI type of VOIP traffic Enable Alarm Reporting for 24V Power
VoipHsupaTti
BSC6900
VOL24_MASK
BSC6900
VOL24_THD_HIGH
Upper Limit of Alarm for 24V Power BSC6900 Lower Limit of Alarm for 24V Power BSC6900
VOL24_THD_LOW
VOL48_MASK
BSC6900
VOL48_THD_HIGH
Upper Limit of Alarm for 48V Power BSC6900 Lower Limit of Alarm for 48V Power BSC6900
VOL48_THD_LOW
VPCLCXN
VPI
Bearing VPI
BSC6900
VPLimitInd
VPLimitInd
BSC6900
VPLimitInd
BSC6900
VPQosPerform
BSC6900
VpRabEstAttMinNum
Threshold of VP RAB Setup Successful VpRabEstSuccRatioThd Ratio[%] BSC6900 Minimum Number of VP Call Release BSC6900
VpRabRelMinNum
Wait Timer For WAMR WAmrUlRateAdjTimerLen Uplink[ms] BSC6900 Enable Water Alarm Reporting BSC6900
WATER_MASK
WEEK
Week Limit
BSC6900
Weight
Weighted factor Weight for Used frequency Weight for Used Frequency
BSC6900
WeightForUsedFreq
BSC6900
WeightForUsedFreq
BSC6900
WINDOWSIZE
BSC6900
WK
Week
BSC6900
WKMODE
Work mode
BSC6900
WORKAREA
BSC6900
WORKMODE
Work Mode
BSC6900
WORKTYPE
Work Type
BSC6900
WTRT
WTR Time[Sec]
BSC6900
XOffset
X Offset
BSC6900
Offset of current CPU XPUSHAREINOFFSETT load and target HD CPU load BSC6900 Current XPU CPU share out threshold0 BSC6900 Release
XPUSHAREOUTTHD
BSC6900
ZONET
TimeZone
BSC6900
MML Command
SET UDPUCFGDATA(Optional)
Meaning This parameter defines the times of retransmission of paging messages. If the times of retransmission exceeds the value of this parameter, retransmission stops. For details, refer to the 3GPP TS 25.331 protocol. Service type of carried over the PATH. For R99, only the R99 service can be carried. For HSPA, only the HSPA service can be carried. For SHARE, R99 and HSPA services can be carried at the same time. This parameter specifies the time to execute re-host policy for the primary hosted NodeB, after the RNC recovers from disaster and starts to operate. It defines the mapping of AC 0~9 to ASCs. For detailed information of this parameter, refer to 3GPP TS 22.011. It defines the mapping of AC 10 to ASCs. For detailed information of this parameter, refer to 3GPP TS 22.011. It defines the mapping of AC 11 to ASCs. For detailed information of this parameter, refer to 3GPP TS 22.011. It defines the mapping of AC 12 to ASCs. For detailed information of this parameter, refer to 3GPP TS 22.011. It defines the mapping of AC 13 to ASCs. For detailed information of this parameter, refer to 3GPP TS 22.011. It defines the mapping of AC 14 to ASCs. For detailed information of this parameter, refer to 3GPP TS 22.011. It defines the mapping of AC 15 to ASCs. For detailed information of this parameter, refer to 3GPP TS 22.011.
ADD AAL2PATH(Mandatory)
SET UPOOLPRIMHOSTPOLICY(Mandatory)
ADD UPRACHACTOASCMAP(Optional)
ADD UPRACHACTOASCMAP(Optional)
ADD UPRACHACTOASCMAP(Optional)
ADD UPRACHACTOASCMAP(Optional)
ADD UPRACHACTOASCMAP(Optional)
ADD UPRACHACTOASCMAP(Optional)
ADD UPRACHACTOASCMAP(Optional)
ADD UPRACHASC(Mandatory)
Identifying an ASC. Access flow control threshold. When the average CPU usage of sliding windows exceeds the threshold, AC flow control is triggered.
SET FCCPUTHD(Optional)
SET FCMSGQTHD(Optional)
SET UACALGO(Mandatory)
Access packet queue usage threshold. When Interval of automatic access classes restriction the average packet queue usage of sliding between cells. When a subsystem of windows to compress the address andan RNC flow Whether exceeds the threshold, ACon cells control performs triggered. controlIfis access classes restriction fields. this parameter is set it selects the the to ENABLE, first managed by this subsystem, address and control area compression is cell at random. After waiting for the time enabled. If this parameter isthe subsystem specified in this parameter, set to DISABLE, the addresssecond cell and the first cell is still selects the and control area compression is disabled. classes restriction. The process with access lasts until all the cells are going through access classes restriction. For detailed information of this parameter, refer to 3GPP TS 22.011. Specifies the interval between consecutive pollings imposed on the PS domain and CS domain in different cells according to the flexible polling restriction mode. Specifies the access classes that are restricted according to the flexible polling restriction mode.
SET UDSACAUTOALGO(Mandatory)
ADD UCELLDSACMANUALPARA(Mandatory)
SET UDSACAUTOALGO(Mandatory)
Specifies the restricted access class according to the flexible polling restriction mode.
ADD UCELLDSACMANUALPARA(Mandatory)
Specifies the access classes that are restricted according to the fixed restriction mode. Specifies the interval delay between When a Interval of access classes restriction. consecutive pollings according to the flexible cell performs access classes restriction, it polling restriction mode. selects some access classes and after the restriction on these access classes lasts for the time specified in this parameter, the access Access restriction ratio. When and the cell classes restriction is released a cell performs access classes restriction, you can select selects other access classes for restriction. some access classes from AC0 to AC9 based on the ratio specified in this parameter and Specifies the interval delay between the perform access classes restriction on consecutive pollings according accessflexible selected access classes. After to the classes polling restriction mode. restriction goes on for AcRstrctIntervalLen, the original access classes restriction is released and other access classes of the local cell are selected for access classes restriction based on the ratio specified in this parameter. OFF indicates that the AC algorithm is automatically disabled. ON indicates that the AC algorithm is automatically enabled.
ADD UCELLDSACMANUALPARA(Mandatory)
SET UACALGO(Mandatory)
SET UDSACAUTOALGO(Mandatory)
SET UACALGO(Mandatory)
SET UACALGO(Optional)
SET FCCPUTHD(Optional)
Access flow control recovery threshold. When the average CPU usage of sliding windows is lower than the threshold, AC flow control is stopped. Access packet recovery threshold. When the average packet queue usage of sliding windows is lower than the threshold, AC flow control is stopped.
SET FCMSGQTHD(Optional)
SET FCSW(Optional)
SET UADMCTRL(Mandatory)
Whether to controlat the radio layer varies with The activity factor AC flow the service priority. The configuration of the activity factor is performed based on the priorities of gold, silver, and copper. The activity factor of SRB is priority insensitive.
ADD USMLCCELL(Optional)
Flag of A-GPS location activation. This parameter indicates whether the GPS Additional Assistance Data Request is sent when the A-GPS method is used. UE positioning mode when the A-GPS method is selected. The UE supports both UE-based A-GPS mode and UE-assisted A-GPS mode.
SET USMLC(Optional)
SET USMLC(Optional)
ADD GPS(Mandatory)
GPS receiver ID GPS receiver type. An GPS receiver can be installed on the local RNC, a Node B controlled by the local RNC, or a neighboring RNC. Difference between the transmit of an AICH. Transmission timing information power of AICH and that of PCPICH. For details, offsetto "0" indicates that there are 7680 chips refer the 3GPP TSaccess preamble of the PRACH between the 25.433 protocol. and AICH. "1" indicates that there are 12800 chips offset between them. For detailed information of this parameter, refer to 3GPP TS 25.211.
ADD GPS(Mandatory)
ADD UCHPWROFFSET(Optional)
ADD UAICH(Optional)
SET ALMPORT(Mandatory)
Alarm ID
Alarm ID
ADD OBJALMSHLD(Optional)
SET ENVALMPARA(Mandatory)
Identifier of the alarm. This parameter uniquely identifies an alarm. This parameter specifies whether the configured HS-SCCH Less Operation Type of alarm selection parameters adopt the octet_align or bit_align mode. Octet_align mode and bit_align mode indicates separately the two different mapping tables of Mac-hs PDU. Please refer to the appendix A of 3GPP TS 25.321. If Manual is chosen, allocating [Code Number Specifies the bandwidth occupied when HS- " for HS-PDSCH] the equal of configured the transmission resource group type " is IP and PDSCH code number. If Automatic is chosen, the " bandwidth mode " is HALF_DUPLEX. allocating HS-PDSCH code number between configured HS-PDSCH Maximum code number and HS-PDSCH Minimum code number. For detailed information of this parameter, refer to 3GPP TS 25.308.
ADD OBJALMSHLD(Optional)
SET UHSSCCHLESSOPPARA(Mandatory)
ADD RSCGRP(Mandatory)
ADD UCELLHSDPA(Optional)
Type of the alarm. The alarm can be a fault alarm or an event alarm.
ADD GPS(Mandatory)
ADD GPS(Mandatory)
EXP ALMLOG(Optional)
Alarm severity. One or more severities can be selected. By default, all severities are selected.
Maximum number of times for event 2B retry. This parameter defines the number of times for event 2B retry when the measurement control is valid. The larger the value of this parameter, the larger the number of times for interfrequency handover retry, and the higher probability retry times of the successfully Maximum for the UE to be event 2C. handed over to the target cell whose load is for This parameter defines the number of times restored. After when the measurement control event severity.the maximum severities can retry One or more number of times Alarm 2C 2B retry, the RNC sends the inter-be forvalid. event is selected. By default, all severities are selected. frequency measurement control message The larger the value of this parameter, the again to hand overof times for inter-frequency to the other larger the number the UEs event 3A. cells Maximum retry times of the of this frequency. the higher probability for handover retry, defines the number of times for This parameter and control message is If the measurement the UE to retry when the measurement control handed over to the event 3A be successfully immediately stopped. released, the retry will is restored. When the target cell whose load be is valid. The larger the value of this parameter, retry timesthe number of times for value, the reaches the the larger retry times of maximum 3C. Maximum the event inter-RAT RNC stops the retry the higher probability the handover retry, defines the number of times for and process. Or if the This parameter measurement control message is released, the UE is successfully handed over to the target event 3C retry when the measurement control retry will beload is restored. When the retry cell whose immediately stopped. parameter, is valid. The larger the value of this times reachesnumber of times for inter-RAT the larger the the maximum value, the RNC stops the retry process. higher probability the handover retry, and the Or if the measurement control message ishanded over to the will be UE is successfully released, the retry target immediately stopped. cell whose load is restored. When the retry times reaches the maximum value, the RNC stops the retry process. Or if the measurement control message is released, the retry will be immediately stopped. This parameter specifies the parameter types for AM RLC. There are three types of AM RLC parameters: parameters of to YES,side,QOS When the parameter is set sender the parameters of receiver side, AMRparameters of control algorithm is used for and services. flow control. When the parameter is set to NO, the QOS control algorithm is not used for AMR services.The QOS actions of AMR services include rate downsizing, inter frequency Threshold of AMR call drop ratio per CPUS to handover and inter rat handover. report KPI alarm.In a checking period, if the ratio is higher than this threshold and the number of AMR call release is RAB establish The minimum number of AMR higher than the related threshold, the report KPI alarm. In a request per CPUS to KPI alarm of AMR call drop ratioperiod,if the number of AMR RAB checking is reported. establish request is a second adjustment of the Timer for triggering higher than the threshold andAMRAMR RAB setup successful ratio the UL the mode. This parameter specifies is lower than of AMR RAB setup successful ratio duration of this threshold,the KPI alarm of AMR Threshold waiting for the voice quality RAB setupacknowledgement afterathe UL AMR enhanced to report KPI alarm. In checking per CPUS ratio is reported. mode adjustment when the associated period,if the ratio is lower than this threshold command is delivered. and the number of AMR RAB establish request The UL than the related threshold,the KPI is higher AMRC rate adjust timer starts when The minimumadjustment AMR call release per AMRCof AMR number of procedure is mode RAB alarm to report KPI setup ratio is reported. CPUS triggered, and stops alarm.In a next when the checking period, if the number is received. If no measurement report of AMR call release is higher than the related received whenthe AMR measurement report is threshold and the UL call drop ratio is higher than this threshold, the AMRC timer expires, you can infer that the KPI alarm of AMR call drop the same state as measured value remains in ratio is reported. that before the previous UL AMRC mode adjustment. The previous AMRC mode adjustment is not effective, and another adjustment is required.
ADD UTYPRABRLC(Mandatory)
SET UQOSACT(Optional)
SET UKPIALMTHD(Optional)
SET UKPIALMTHD(Optional)
SET UKPIALMTHD(Optional)
SET UKPIALMTHD(Optional)
SET UQOSACT(Optional)
BLK AAL2PATH(Mandatory) ADD ADJNODE(Mandatory) ADD AAL2PATH(Mandatory) ADD AAL2RT(Mandatory) ADD IPPATH(Mandatory) ADD ADJMAP(Mandatory)
LOP VCL(Mandatory)
SET VCLLOP(Optional)
SET ENVALMPARA(Optional)
ADD USMLCCELL(Optional)
ADD USMLCCELL(Optional)
ADD USMLCCELL(Optional)
ADD USMLCCELL(Optional)
ADD USMLCCELL(Optional)
New namethe the alarm Altitude of of cell antenna in the WGS-84 coordinates. This is a necessary parameter, controlled by MTRLGY and valid when Latitude of the cell antenna value WGS-84 MET~0(metric system).The in the of this coordinates. The parameter the cellvalue corresponding to the has effect on the location result. Altitude A degrees antenna in C seconds is [A latitude of B minutes the WGS-84 coordinates. This is controlled by MTRLGY + (B/60) + (C/3600)] / 0.000001. and example, the value corresponding to the For valid when IMP~1(British measurement).The value of this36 seconds has latitude 31 degrees 30 minutes parameter is effect (30/60) location result.0.000001 = [31 + on the + (36/3600)] / 31510000. This is controlled by GCDF and valid of the cell when This parameter specifies the latitudeWGS-84 Longitude of theformat).The value of cell antenna in the DEG~0(degreeWGS-84 coordinates. this input antenna in the value corresponding to the The coordinates. The parameter has effect on the location result. format is ddd:mm:ss.ssss. longitude A degrees B minutes C seconds is [A This is controlled by GCDF and valid when + (B/60) + (C/3600)] / 0.000001. SEC~1(degree, minute,corresponding to the For example, the value second format).The value of this parameter40 minuteson the longitude 121 degrees has effect 36 seconds location result. + (36/3600)] / 0.000001 = is [121 + (40/60) 121676666. This is controlled by GCDF and valid when DEG~0(degree format).The value of this parametercell antenna inthe location Longitude of the has effect on the WGS-84 result. coordinates.The input format is ddd:mm:ss.ssss. This is controlled by GCDF and valid when SEC~1(degree, minute, second format).The value of this parameter has effect on the location result. Coverage angle of a sector. For an omnidirectional cell, the value is 360.The value of this parameter has effect on the location result.
ADD USMLCCELL(Optional)
ADD USMLCCELL(Mandatory)
ADD USMLCCELL(Mandatory)
Azimuth of the main lobe of the cell antenna (the clockwise angle from the north to the direction of the main lobe).The value of this parameter may affect the UE's final location result. Meaning: Access point (AP) cell indicator. When the indicator is "TRUE", it indicates that the cell is an AP cell. AP is a device for E1T1 anti-error switch. accessing the UMTS wireless network. This device integrates the functions of the NodeB software and parts of the functions of the RNC software. It is applied to households and SOHO layer application type of the SCTP link. Upper users. The upper layer application type of the Iub interface is NBAP. The upper layer application type of the Iur, IuPS, and IuCS interface is M3UA. This parameter specifies the direction where the current typical RAB parameters are applied.
ADD MPGRP(Optional)
ADD UEXT3GCELL(Optional)
ADD SCTPLNK(Mandatory)
ADD UTYPRABBASIC(Mandatory)
Area flag
Area flag
SET UUSERPRIORITY(Optional)
SET UUSERPRIORITY(Optional)
SET UUSERPRIORITY(Optional)
SET UUSERPRIORITY(Optional)
SET UUSERPRIORITY(Optional)
SET UUSERPRIORITY(Optional)
SET UUSERPRIORITY(Optional)
SET UUSERPRIORITY(Optional)
SET UUSERPRIORITY(Optional)
SET UUSERPRIORITY(Optional)
SET UUSERPRIORITY(Optional)
SET UUSERPRIORITY(Optional)
SET UUSERPRIORITY(Optional)
SET UUSERPRIORITY(Optional)
User_priority corresponding to Allocation/Retention priority ARP timeout. Retransmission times upon 9. When the ARP request times exceeds the retransmission time without a response, the ARP/BFD detection failure alarm is reported. This may trigger the port or board switchover.
STR IPCHK(Optional)
STR IPCHK(Optional)
ARP packet timeout time Network management type of the alarm. By default, all network management types are selected.
SET ENVALMPARA(Optional)
Network management type of the alarm. By default, all network management types are selected. operation and maintenance channel When the of NodeB is operating in the ATM, this parameter indicates the slot number of the interface board of the BSC6900 interworking with NodeB. When the operation and maintenance channel of NodeB is operating in the ATM, this parameterwhether attach/detach number of the Indicating indicates the subrack is allowed. interface board of indicates that MS(Mobile NOT_ALLOWED the BSC6900 interworking with NodeB. Station) cannot apply the IMSI attach/detach procedure. ALLOWED indicates that MS(Mobile Station) can apply the IMSI attach/detach procedure. It is valid only when [CN domain ID] is set as CS_DOMAIN.
ADD UNODEBIP(Mandatory)
ADD UNODEBIP(Mandatory)
ADD UCNDOMAIN(Optional)
SET E1T1LOP(Optional)
STR E1T1TST(Optional)
SET SSLAUTHMODE(Mandatory)
ADD PPPLNK(Mandatory)
ADD MPGRP(Mandatory)
ADD PPPLNK(Mandatory)
ADD MPGRP(Mandatory)
ADD PPPLNK(Mandatory)
ADD MPGRP(Mandatory)
ADD PPPLNK(Optional)
ADD MPGRP(Optional)
SET ETHPORT(Optional)
Whether the self-negotiation mode is adopted Password to FG2 board is used andMP link 1. When the validate, upon PPP or the port negotiation the self-negotiation mode must be type is GE, adopted. 2. If the self-negotiation mode is adopted, the FE port rate, working modefor the PPP or MP Type of validation protocol and flow control mode must be link negotiationin accordance with the negotiation result. If the self-negotiation mode is not adopted, the FE port rate, working mode and flow control mode must be specified. Make Typethat the specified attributes are the same sure of validation protocol for the PPP or MP linkthat of the peer. Otherwise, transmission as negotiation failure must be incurred. 3. If the self-negotiation mode is adopted on the local system, the peer must use the selfnegotiation mode.
LCK SCHTSK(Optional)
Auto unlock switch Identifying the available sub channels of an ASC. When a UE has been the locked user is Duration of time after which accessed to a sub channel, if [AICH transmission timing] is set to unlocked automatically 1 (using the command "ADD UAICH"), the 4 bits of this parameter will be repeated 3 times to form a Bitstring (12). Then, it is put into an optical calculation together with the Bitstring "and " adaptation type between high-order path correspondingsection. (12) and multiplex to the available sub channel allocated to the PRACH, and a 12-bit data stream is obtained signature bit index of Identifying the available finally. If aendis 1, the corresponding sub channel is available an ASC. For detailed information of this for this ASC. If [AICH transmission timing] is parameter, refer to 3GPP TS 25.304. set to 0, the lowest 3 bits of this parameter will be repeated 4 times to form a Bitstring (12). Then, Identifying the available signature start index of it is put into an "and" calculation together with an ASC. For (12) corresponding to the the Bitstring detailed information of this parameter, refer to 3GPP TS 25.304. PRACH, available sub channel allocated to the and a 12-bita CN stream is obtained finally. If a Capacity of data node. This parameter bit is 1, the corresponding sub channel nodes indicates the proportion of different CN is available for this ASC. For than the actual in the total capacity rather detailed information of this parameter, refer to 3GPP TS 25.304. capacity of each CN node. In the case of IUFLEX, if one user cannot select a CN node according to the NAS Node Selection Function (NNSF), the user can select a CN node according to this parameter.
SET PWDPOLICY(Optional)
SET OPT(Optional)
ADD UPRACHASC(Optional)
ADD UPRACHASC(Optional)
ADD UPRACHASC(Optional)
ADD UCNNODE(Mandatory)
SET ALMPORT(Optional)
SET OPT(Optional)
Threshold of B1 and B2 signal degrade. This parameter specifies the generation threshold and the recovery threshold of the B1B2 signal degradation threshold in SDH frames at the optical port. B1 and B2 signal failure. This Threshold of parameter specifies the generation threshold and the recovery threshold of the B1B2 signal failure threshold in SDH frames at the optical port. Threshold of B3 signal degrade. This parameter specifies the generation threshold and the recovery threshold of the B3 signal degradation threshold in SDH frames at the optical port. Threshold of B3 signal failure. This parameter specifies the generation threshold and the recovery threshold of the B3 signal failure threshold in SDH frames at the optical port.
SET OPT(Optional)
SET OPT(Optional)
SET OPT(Optional)
SET CLK(Optional)
Switch of backplane LINE1 If [Auto-Adaptive Background Noise Update Switch] is set to OFF, it is used to set background noise of the cell. If [Auto-Adaptive Switch of backplane LINE2Switch] is set to Background Noise Update ON, new background noise is restricted by this parameter and "BgnAbnormalThd". For detailed information of this parameter, refer to the 3GPP TS 25.133.
SET CLK(Optional)
ADD UCELLCAC(Optional)
BKP LOGDB(Optional)
BKP DB(Optional)
STR IPCHK(Optional)
STR IPCHK(Optional)
ADD UEXT3GCELL(Mandatory)
This parameter specifies the selected frequency bands during cell setup.
ADD UEXT2GCELL(Optional)
SET UFACHBANDWIDTH(Optional)
ADD UEXT2GCELL(Mandatory)
ADD UEXT2GCELL(Mandatory)
When the inter-RAT cell frequency number is within the range 512-810, the parameter indicates whether this frequency number belongs to the DSC1800 or PCS1900 frequency band. This parameter specifies the maximum available bandwidth for each traffic class in the Indicating the selectedthe downlink HSDSCH in Cell_FACH state with frequency Band in the cell setup process. Forflow exceeds the the of Identifying BCCH frequency number of use. If the actual data detailed information this parameter, refer to 3GPP TS 25.433. so inter-RAT cell. maximum bandwidth, the traffic is buffered BCCH: buffer occupancy Channel that the Broadcast Control is increased. As a GSM1900 result, the state transition from Cell-FACH to Frequency occurs. (511-811) CELL-DCHnumber: This parameter should be GSM1800 set according to the traffic class. Frequency number: (511-866) GSM900 Frequency number: (0-125) or (954-1024) Uniquely identifying a neighboring base station GSM850 with the same carrier Frequency number: (127-252) GSM450 Frequency number: (258-294) GSM480 This parameter specifies the transmission Frequency number: (305-341)sends the data power of the HS-PDSCH that carried on the BCCH. When UE receive data from the HS-PDSCH in Enhanced CELL_FACH state, the data on the BCCH is When UE is in Enhanced CELL_FACH state, alsodata on the BCCH is also sent on the HSthe sent on the HS-PDSCH. PDSCH. Meanwhile, the HS-SCCH shall send signaling related to HS-PDSCH. This parameter specifies the transmission power of the HS-SCCH at the time. Offset of the type. transmit power from the DSP bearer BCH PCPICH transmitthat the in a cell. Forbearer is MTP3: indicates power lower layer detailed information of this ATM/TDM scenario; the MTP3 used in parameter, refer to 3GPP TS 25.433 and TS 25.331. M3UA: indicates that the lower layer bearer is the M3UA used in IP scenario; MTP3_M3UA: indicates that the lower layer bearer is the MTP3 and M3UA used type of the This parameter specifies the bearer in ATM/TDM/IP scenario. service. - R99: The service is carried on a non-HSPA channel. - HSPA: The continuous failed heartbeat Threshold of service is carried on an HSPA channel. between the two RNCs in a RNC detecting pool.If the heartbeat is not detected from the peer RNC for a successive number of times specified by this parameter, the local RNC considers that the peer RNC is faulty. peer If the heartbeats are detected from the RNC for a successive number of times specified by this parameter, the local RNC considers that the peer RNC is normally working.
ADD UCELLEFACH(Optional)
ADD UCELLEFACH(Optional)
ADD UBCH(Optional)
ADD N7DPC(Mandatory)
SET UUSERGBR(Mandatory)
ADD URNCPOOL(Optional)
ADD URNCPOOL(Optional)
ADD URNCPOOL(Optional)
SET UHOCOMM(Optional)
The bit rate threshold used to determine whether to perform soft handover for the Best Effort (BE) service on DCH. If current DL DCH bit rates of all the BE services of a user are lower than or equal to this threshold, the system will perform soft handover for this user Interval for the local RNCquality. When the to guarantee the service sending the heartbeat to the peer RNC in exceeds the velocity of the downlink DCH the same RNC pool. restriction of this parameter, RNC will perform intra-frequency hard handover. To avoid the great effect of the system capacity when multilinks transmit a great deal of the same data in the macro diversity. Timer for state transition from CPC to E_FACH of BE services, used to check whether the UE in the CELL_DCH(with CPC) state with BE services is in the stable low activity state. Timer for state transition from CPC to FACH of BE services, used to check whether the UE in the CELL_DCH(with CPC) state with BE services is in the stable low activity state. Timer for state transition from DCH to E_FACH of BE services, used to check whether the UE in the CELL_DCH(with DCH) state with BE services is in the stable low activity state. Timer for state transition from DCH to FACH of BE services, used to check whether the UE in the CELL_DCH state with non-real-time services action selected low the QoSstate. The first is in the stable by activity control algorithm when the DL QoS of BE service deteriorates.If QoS action is RateDegrade, then the rate will be downsized to the full coverage rate according to 3-rates QoS control The second action selected by the rule. algorithm when the DL QoS of BE service deteriorates.If QoS action is RateDegrade, then the rate will be downsized to the full coverage action selected to 3-rates rule. The third rate according by the QoS control algorithm when the DL QoS of BE service deteriorates.If QoS action is RateDegrade, then the rate will be downsized to the full coverage rate according to 3-rates rule. Timer for state transition from E-DCH to FACH of BE services, used to check whether the UE in the CELL_DCH(with E-DCH) state with BE services is in the stable low activity state. This parameter specifies the threshold of the traffic volume of 4A event for triggering the transition of BE specifies fromoccurrence time This parameter services the E_FACH to CPC. event for triggering the transition of BE of 4A services from E_FACH to CPC. This parameter prevents unnecessary reports that are caused by traffic volume instability from being triggered.
SET UUESTATETRANSTIMER(Optional)
SET UUESTATETRANSTIMER(Optional)
SET UUESTATETRANSTIMER(Optional)
SET UUESTATETRANSTIMER(Optional)
SET UQOSACT(Optional)
SET UQOSACT(Optional)
SET UQOSACT(Optional)
SET UUESTATETRANSTIMER(Optional)
SET UUESTATETRANS(Optional)
SET UUESTATETRANS(Optional)
SET UUESTATETRANS(Optional)
This parameter specifies the threshold of the traffic volume of 4A event for triggering the transition of BE specifies fromoccurrence time This parameter services the E_FACH to DCH. event for triggering the transition of BE of 4A services from E_FACH to DCH. This parameter prevents unnecessary reports that are caused by traffic volume instability from being triggered. This parameter specifies the threshold of the traffic volume of 4A event for triggering the transition of BE specifies fromoccurrence time This parameter services the E_FACH to HSDSCH. of 4A event for triggering the transition of BE services from E_FACH to HS-DSCH. This parameter prevents unnecessary reports that are caused by traffic volume instability from being triggered. This parameter specifies the threshold of the traffic volume of 4A event for triggering the transition of BE specifies fromoccurrence time This parameter services the FACH to E-DCH with CPC technology. of 4A event for triggering the transition of BE services from FACH to E-DCH with CPC technology. This parameter prevents unnecessary reports that are caused by traffic volume instability from being triggered. This parameter specifies the threshold of the traffic volume of 4A event for triggering the transition of BE specifies fromoccurrence time This parameter services the FACH to HSDSCH with CPC technology. transition of BE of 4A event for triggering the services from FACH to HS-DSCH with CPC technology. This parameter prevents unnecessary reports that are caused by traffic volume instability from being triggered. This parameter specifies the threshold of the traffic volume ofspecifies the occurrence time This parameter 4A event for triggering the transition of for triggering fromtransition of BE of 4A event BE services the FACH to DCH. services from FACH to DCH. This parameter prevents unnecessary reports that are caused by traffic volume instability from being triggered. This parameter specifies the threshold of the traffic volume ofspecifies the occurrence time This parameter 4A event for triggering the transition of for triggering fromtransition of BE of 4A event BE services the FACH to E-DCH. services from FACH to E-DCH. This parameter prevents unnecessary reports that are caused by traffic volume instability from being triggered.
SET UUESTATETRANS(Optional)
SET UUESTATETRANS(Optional)
SET UUESTATETRANS(Optional)
SET UUESTATETRANS(Optional)
SET UUESTATETRANS(Optional)
SET UUESTATETRANS(Optional)
SET UUESTATETRANS(Optional)
SET UUESTATETRANS(Optional)
SET UUESTATETRANS(Optional)
SET UUESTATETRANS(Optional)
SET UUESTATETRANS(Optional)
SET UUESTATETRANS(Optional)
This parameter specifies the threshold of the traffic volume of 4A event for triggering the transition of BE specifies fromoccurrence time This parameter services the FACH to HSDSCH. of 4A event for triggering the transition of BE services from FACH to HS-DSCH. This parameter prevents unnecessary reports that are caused by traffic volume instability from being triggered. Timer for state transition from FACH or E_FACH to PCH of BE services, used to check whether the UE in the CELL_FACH state is in the stablestateactivity state. HSPA to Timer for low transition from E_FACH of BE services, used to check whether the UE in the CELL_DCH(with HSPA) state with BE services is in the stable low activity state. transition from HS-DSCH to Timer for state FACH of BE services, used to check whether the UE in the CELL_DCH(with HS-DSCH) state with BE services is in the stable low activity state. Pending time after the traffic volume event 4B for state transition from HSPA to FACH is reported. This parameter is used to prevent too many traffic volume events 4B being reported. This parameter is used to check whether the UE in the low activity state. If the UE is on HSDSCH the traffic the low activity counter When channel, volume is below the 4B increases and1remains so for thevolume event threshold by every time traffic period 4B is reported. parameter, the event 4B is specified by this reported. This parameter prevents unnecessary traffic volume events that are of This parameter specifies the rate threshold caused by traffic volume instability from being 2ms TTI on the E-DCH for HSUPA BE service. triggered. cell capability and UE capability When the allows for rejecting rate increase E-DCH is used Timer 2ms TTI, 2ms TTI on the after rate if the PS BEperformed across the Iur interface decrease is service carried on HSUPA with uplink rate isn't less than this threshold. for BE services. If the best cell is on the Otherwise, 10ms starts when rate decrease DRNC, the timer TTI is used. based on RLC retransmission is triggered. Before the timer expires, requests for rate increase triggered by DL traffic volume event 4A will be rejected. margin of single BE traffic, The relative power used to calculate the triggering threshold of event F, can avoid the fluctuation ofthe QOS When the parameter is set to YES, traffic rate in case algorithm is used for restricted after rate control the power becomes BE services. is increased. When the parameter is set to NO, the QOS control algorithm is not used for BE services.The QOS actions of BE services include rate downsizing, inter frequency handover and inter rat handover.
SET UUESTATETRANS(Optional)
SET UUESTATETRANSTIMER(Optional)
SET UUESTATETRANSTIMER(Optional)
SET UUESTATETRANSTIMER(Optional)
SET UUESTATETRANS(Optional)
SET UUESTATETRANS(Optional)
SET UUESTATETRANS(Optional)
SET UFRC(Optional)
SET UQOSACT(Optional)
SET UQOSACT(Optional)
ADD UTYPRABBASIC(Mandatory)
This parameter specifies the power occupancy of the control part of reference TFC. For details of this parameter, refer to the 3GPP TS 25.214. This parameter specifies the power occupancy of the data part of reference TFC. For details of this parameter, refer to the 3GPP TS 25.214. action selected by the QoS control The first algorithm when the UL QoS of BE service deteriorates.If QoS action is RateDegrade, then the rate will be downsized to the full coverage rate according to 3-rates QoS control The second action selected by the rule. algorithm when the UL QoS of BE service deteriorates.If QoS action is RateDegrade, For the rate will be downsized to the full thenBE service, When the parameter is set to SINGLE, rate according to 3-rates rule. can coverage an UL event 6A1 or 5AQoS control The third action selected by theenhancement independently trigger the QOS algorithm when the UL QoSsettings decide action. The 6A1, 5A switch of BE service deteriorates.If QoS 6A1 oris RateDegrade, whether to perform action 5A measurement then theWhen the parameter is set to full control. rate will be downsized to the coverage rate according to events 6A1+5A can COMBINE, only combined 3-rates rule. trigger the QOS enhancement action, and whether to perform 6A1 and 5A measurement is not controlled by the 6A1 and 5A measurement switch. Event 5A measurement switch when BeUlEvTrigInd is set to SINGLE for BE service. If this parameter is set to YES, event 5A measurement is delivered. Event 6A1 measurement switch when BeUlEvTrigInd is set to SINGLE for BE service. If this parameter is set to YES, event 6A1 measurement is delivered. Timer to trigger the next QoS enhancement action for UL BE services. This parameter UL event the measurement switch for BE specifies 6D duration of waiting for the UL service. If this parameter is set to YES, event QoS enhanced acknowledgement after UL rate 6D measurement is delivered. adjustment. The timer starts when the BE UL rate adjustment procedure is triggered, and stops when the RNC receives a 6B1/6B2 event or when the timer expires. Timeout times ofon the Iub interfaceseveral The MAC-c flow the BFD packet. If will consecutive BFD packetsCELL_FACH is the increase after Enhanced are not received, BFD session the cell. When the UE enters the supported in is set to the DOWN state. Enhanced CELL_FACH state, this parameter determines the guaranteed speed of the MACc flow that sends background service data on the Iub interface.
ADD UTYPRABBASIC(Mandatory)
SET UQOSACT(Optional)
SET UQOSACT(Optional)
SET UQOSACT(Optional)
SET UQOSACT(Optional)
SET UQOSACT(Optional)
SET UQOSACT(Optional)
SET UQOSACT(Optional)
SET UQOSACT(Optional)
STR IPCHK(Optional)
ADD UCELLEFACH(Optional)
ADD UCELLEFACH(Optional)
ADD UCELLCAC(Optional)
ADD UCELLCAC(Optional)
ADD UCELLCAC(Mandatory)
ADD UCELLCAC(Optional)
ADD UCELLCAC(Mandatory)
The MAC-c flow on Iub interface will increase after the Enhanced CELL_FACH is supported in the cell. When the UE enters the Enhanced (1) This parameter, along when "BGNSwitch" This parameter is applied with the [Algorithm CELL_FACH(1) If thelimit the validation time of start time], is used to difference of determines is set to ON. state, this parameter measured the maximum speed of thefilteredupdatethat the background noise automatic and the background noise without MAC-c flow sends background serviceis time] isthe Iub algorithm. If [Algorithm stop larger greater current background noise data on than the interface. than [Algorithm start background noise will not RTWP threshold, thetime], and the background Only when the measured background noise's noise automatic update algorithm new be updated. (2) If this parameter,ofis enabled, difference the duration reaches theactivated duringoutput of then the algorithm and the configured the is is background noise background noise update value the auto-adaptive stop time] to [Algorithm period than the RTWP threshold, the larger of [Algorithm filter could each day. In other periods, the start time] be regarded as effect background background noise will not beis replaced with updated. noise, and the current valuestop time] is less algorithm fails. If [Algorithm the This parameter, along with the [Algorithm (1) new one. At startsame time, the background than [Algorithm the time], and the autoadaptive status should be the validation time of stop time], is used to limit restarted; otherwise, noise automatic update algorithm is enabled, the output could noise automatic update the background not activated during the then the algorithm is be regarded as the effective background noise. time] is greater algorithm. If [Algorithm stop period the[Algorithm stop time] each day to is When of number of time], and the background equivalent users than [Algorithm time] uplink next day. In other start of [Algorithmthan this parameter, the RTWP not larger start update the noise automatic algorithm periods, the algorithm background is enabled, fails couldthe algorithm is activated during the noise. then be regarded as (2) Input format: HH&MM&SS could be input Therefore, the measured time] to [Algorithm RTWP period of [Algorithm stop Recommended value: None to the auto-adaptive background noise update start time] each day. In other periods, the filter; otherwise, the RTWP couldtime]be less algorithm fails. If [Algorithm stop not is regarded as background noise, the background than [Algorithm start time], and and should not be input to the filter, andalgorithm is enabled, noise automatic update at the same time, the auto-adaptive status activated during the then the algorithm is should be reset. period of [Algorithm stop time] each day to [Algorithm start time] of the next day. In other periods, the algorithm fails. (2) Input format: HH&MM&SS When the parameter is 'OFF', the autoadaptive background noise update algorithm is switched off. Otherwise, the algorithm is This parameter specifies the target switched on. transmission quality of DCH, that is, target The difference on RTWP that trigger the update BLER of DCH of the radio interface if the of background noise. DCH. difference is larger subflow is carried on If the This QoS-related than the threshold,by the CRNC to determine parameter is used the background will be updated. SIR value for use in admission and the target This parameter specifies the intra-frequency This parameterTo used in the algorithm of the power control. report interval of blind handover. measurement is calculate the value of this load reshuffling (LDR) result of 10*Lg(BLER) parameter, obtainintra-frequency measurement It determines the to intra-frequency blind Indicating whethertheperform blindhow many handover. BLER refers to Reshuffling (LDR) defines handover. where theinterval is not in the alternative cells reporting This parameter the actual BLER, FALSE: The cell of Load needed for making measurement reports and thenhandover, so are up.the value to this round The smaller blind handover. the result handover of this for blind handover decision. The RNC starts the blind the smallerblindintra-frequency parameter, the cell cannot be triggered. UE continuously blind handoverreporting interval, and the measurement only if the TRUE: The cell is intra-frequency cells for in the alternative reports adequate intra-frequency smaller the time for blind handover, so blind handover to this cell measurement reports that meet the quality of measurement. But the greater the influence might be triggered. handover. During the requirements of blind signal fluctuation, which can result in wrong measurement the contrary, the larger thean handover. On process, if the UE reports value unqualified measurement report, intraof this parameter, the longer the the process ends. And measurement reporting blind frequency the RNC does not start interval, and handover oninfluence ofcell. the less the the target signal fluctuation, which can improve the possibility of successful blind handover. But if the time for intrafrequency measurement becomes long, the handover may not be performed timely.
ADD UCELLCAC(Optional)
ADD UCELLCAC(Optional)
ADD UTYPRABOLPC(Mandatory)
SET UINTRAFREQHO(Optional)
SET UINTRAFREQHO(Optional)
ADD U2GNCELL(Mandatory)
ADD UINTERFREQNCELL(Optional)
This parameter specifies the handover. Indicating the priority of blind quality threshold for the event 1F reported cell to trigger blind The value 0 represents the highest priority. handover. This are assigned to concentric Priorities 0~15 parameter defines the lowest quality threshold of the emergency blind neighboring cells, which can ensure successful Blind handover blind handover is implemented The condition. handover. Priorities 16~30 are assigneddefined If theifvalue is notquality thethe cell, which to handover is only the signal -115, in handover, which neighboring cells for HO, which is used for the as Conditional Blind blind the specified reports event 1F, exceeds cannot ensure successful handover.the same inter-frequency neighboring cellswill be threshold. Otherwise, the report of coverage. discarded. If theparameter is set tohandover possibility as This value is -115, the raise the is defined of Direct Blindblind handover. If the signal quality successful HO, which is used for the interfrequency neighboringevent of larger coverage. in the cells that report cells 1F are all very poor, this indicates that the user is located at the edge of coverage area. Under this condition, if the blind handover is initiated rashly, the possibility of call drop increases.
SET ALMBLKSW(Optional)
SET ALMBLKPARA(Optional)
Base Station Controller alarm blink filter switch Alarm blink filter threshold. When the interval between the generation and clearance of an alarm is equal to or smaller than the alarm blink filter threshold, the alarm is filtered and not reported to the NMS.
SET ALMBLKSW(Optional)
SET ALMBLKSW(Optional)
SET AAL2TMR(Optional)
Switch controlling whether to perform statistics of Base Station Controller alarms Whether to use the device IP address as the local IP address. When this parameter is set This timerthestarted when an AAL2 signaling to "YES", is device IP address is used as the entityIP address peer node alink. When this local sends the of the PPP request for blocking an AAL2 path. the device IP parameter is set to "NO", address is not used as the local IP address of the PPP link. In this case, you need to reconfigure the local IP address of the PPP link.
SET BOXRPT(Mandatory)
STR BKP(Mandatory) SET FCSW(Mandatory) SET FCCPUTHD(Mandatory) SET FCMSGQTHD(Mandatory) SET CPUTHD(Mandatory)
ADD BRD(Mandatory)
ADD BRD(Optional)
SET ETHPORT(Mandatory)
ADD PPPLNK(Mandatory)
BKP UINTERRATHOCOV(Optional) SET LOGDB(Optional) SET UINTERRATHONCOV(Optional) ADD UCELLINTERRATHOCOV(Optional) ADD UCELLINTERRATHONCOV(Optional) ADD UCELLMBDRINTERRAT(Optional)
Type of the board Base Station Identity Code (BSIC) verification switch. 1. BSIC(Base Station Identity Code): identity code of the base station. Board type 2. This parameter is used to control cells where inter-RAT measurement reports are triggered. When the value is REQUIRED, the measurement report is triggered after the BSIC Board measured cell is deciphered correctly; of the type when the value is NOT_REQUIRE, measurement reporting is triggered whatever the BSIC is deciphered or not, if the measured cell meets the reporting conditions. This Board type Backup mode of the log. If periodical report parameter is valid for both "ENTIRE" is selected, all logs report mode. To ensure the mode and event in the current database are backed up. If "INCREMENTAL" is selected,only reliability of handovers, the system reports the logscells of which thelast backup are backed the generated after BSIC is correctly up. decoded, that is, the recommended value of the parameter is REQUIRED. If the parameter is set to NOT_REQUIRED, handovers occur more easily, the setting of REQUIRED is of higher reliability for the handovers, though.
SET SHARETHD(Mandatory)
SET CLK(Mandatory)
CON PATCH(Mandatory)
Board type
LOP E1T1(Mandatory)
Board type
STR E1T1TST(Mandatory)
Board type
ADD IMAGRP(Mandatory)
Board type
SET OPT(Mandatory)
Board type
SET COPTLNK(Mandatory)
Board type
ADD ATMLOGICPORT(Optional)
Board type
ADD IPLOGICPORT(Mandatory)
ADD SCTPLNK(Optional)
ADD IPLOGICPORT(Mandatory)
Board type Switch for adjusting the dynamical bandwidth of the logical port. If this switch is turned on, the system adjusts the dynamical bandwidth of the logical port according to the transmission Whether to enable the data bindingIPPM. After quality of the link monitored by the function this switch is turned on, the IPPM function must be activated on the IPPATH of this logical port. For details about the IPPM, see the description of the command "ACT IPPM". If the available backward bandwidth is less than or equal to this value, the backward congestion alarm is emitted and backward congestion control is striggered. If the available backward bandwidth is greater than this value, the backward congestion alarm is cleared and backward congestion control is stopped. If the ratio of available backward bandwidth is greater than this value, the backward congestion alarm is cleared and backward congestion control is stopped.
ADD TRMLOADTH(Optional)
ADD TRMLOADTH(Optional)
ADD TRMLOADTH(Optional)
ADD TRMLOADTH(Optional)
If the ratio of available backward bandwidth is less than or equal to this value, the backward congestion alarm is emitted and backward congestion control is triggered. If the available backward bandwidth is greater than this value, the backward overload congestion alarm is cleared and backward overload control is stopped. If the ratio of available backward bandwidth is greater than this value, the backward overload congestion alarm is cleared and backward overload control is stopped. If the available backward bandwidth is less than or equal to this value, the backward overload congestion alarm is emitted and backward overload control is triggerd. If the ratio of available backward bandwidth is less than or equal to this value, the backward overload congestion alarm is emitted and backward overload control is triggered.
ADD TRMLOADTH(Optional)
ADD TRMLOADTH(Optional)
ADD TRMLOADTH(Optional)
ADD TRMLOADTH(Optional)
ADD TRMLOADTH(Optional)
ADD TRMLOADTH(Optional)
ADD IPLOGICPORT(Optional)
ADD RSCGRP(Mandatory)
ADD IPLOGICPORT(Optional)
Threshold of bandwidth change based on the Bandwidth mode load control algorithm. When the system detects that the change of the available bandwidth exceeds this threshold through the The parameter values are described as IPPM, the system starts adjusting the follows: bandwidth of the logical port. NODEB_CREDIT_CAC_SWITCH: The system performs CAC based on the usage state of NodeB credit. When the NodeB's credit is not enough, the system rejects new access requests.
SET UCACALGOSWITCH(Optional)
SET UCALLSHOCKCTRL(Optional)
SET UCALLSHOCKCTRL(Optional)
SET UUSERPRIORITY(Optional)
Decide which carrier is prior when ARP and TrafficClass are both identical.
ADD AAL2PATH(Mandatory)
Subrack number of bearing the AAL2 path Whether to indicate that the IP Path is carried on the IP logic port or resource group. NULL indicate the IP Path is carried on the physics port. Number of the bearer FRAATM(Fractional ATM) link. The parameter is valid only when the bearer typeFRA ATM link that carries the Number of the is set to FRAATM. PATH. This field is valid only when the " bearer type " parameter is set to FRAATM. The bearing FRAATM link must be configured already.
ADD IPPATH(Optional)
ADD SAALLNK(Mandatory)
ADD AAL2PATH(Mandatory)
ADD IPOAPVC(Optional)
ADD ATMLOGICPORT(Optional)
Fractional ATM link number of the logical port Number of the bearer IMA group. The parameter is valid only when the bearer type is set to IMA. Number of the IMA group that carries the PATH. The field is value only when the " bearer type " parameter is set to IMA. The bearing IMA group must be configured already.
ADD SAALLNK(Mandatory)
ADD AAL2PATH(Mandatory)
ADD IPOAPVC(Optional)
ADD ATMLOGICPORT(Optional)
When the NCP/CCP is based on ATM, set Bearing link type to SAAL. When the NCP/CCP is based on IP, set Bearing link type to SCTP. When the NCP/CCP is based on ATM/IP, set Bearing link type to SAAL-SCTP. For detailed information of this parameter, refer to 3GPP TS 25.430. Number of the NCOPT port that carries the SAAL link. The parameter is valid only when the bearer type is set to NCOPT. Number of the NCOPT port that carries the path. This field is valid only when the " bearer type " parameter is set to NCOPT.
ADD SAALLNK(Mandatory)
ADD AAL2PATH(Mandatory)
ADD IPOAPVC(Mandatory)
ADD ATMLOGICPORT(Optional)
ADD SAALLNK(Mandatory)
ADD AAL2PATH(Mandatory)
ADD SAALLNK(Mandatory)
Number of the subrack bearing the SAAL link Lower layer link type of bearing the Path. UNI: see"ADD UNILNK"; IMA: see"ADD IMALNK"; Bearer type of the SAAL link outgoing port FRAATM: see"ADD FRALNK"; NCOPT: see"LST OPT"; ATMLOGICPORT: see"ADD ATMLOGICPORT"; NULL: used when testing.
ADD SAALLNK(Mandatory)
ADD AAL2PATH(Mandatory)
ADD IPOAPVC(Mandatory)
Bearer type
ADD ATMLOGICPORT(Mandatory)
ADD IPLOGICPORT(Optional)
STR IPCHK(Optional)
ADD SAALLNK(Mandatory)
Number of the bearer UNI link. The parameter is valid only when the bearer type is set to UNI. Number of the UNI link that carries the PATH. The field is value only when the " bearer type " parameter is set to UNI. The bearing UNI link must be configured already.
ADD AAL2PATH(Mandatory)
ADD IPOAPVC(Optional)
ADD ATMLOGICPORT(Optional)
ADD SAALLNK(Mandatory)
ADD IPOAPVC(Optional)
ADD SAALLNK(Mandatory)
ADD IPOAPVC(Optional)
ADD SAALLNK(Mandatory)
ADD AAL2PATH(Mandatory)
ATM logic of the VCL of the the PATH. This VPI value port No. bearing bearer network field is valid only when the " bearer type " parameter is set to ATM logic port. The ATM logic port number must be configured. bearing ATM logic port of the bearer. The parameter mapping between interface boardsis The value is valid only when the bearer type set to ATMLOGICPORT.as follows: AEUa: and ATM logic ports are 0~127; AOUa: 0~255; UOIa_ATM: 0~383; AOUc: 0~499; UOIc: 0~499. The ATM logic port must be the leaf ATM logic port (the last level ATM logic port).
ADD IPOAPVC(Mandatory)
ADD UCBSADDR(Mandatory)
ADD UCBSADDR(Mandatory)
ADD IPLOGICPORT(Optional)
SET FCCPUTHD(Optional)
Maximum burst size (MBS) Broadcast CPU usage threshold for Cell Service (CBS) flow control. When the average CPU usage of sliding windows reaches or exceeds the threshold, CBS flow control is triggered. Packet queue usage threshold for CBS flow control. When the average packet queue usage of sliding windows reaches or exceeds the threshold, CBS flow control is triggered.
SET FCMSGQTHD(Optional)
ADD UCELLQUICKSETUP(Mandatory)
A CBS Operator of the cell. CPU usage threshold for recovery from CBS flow control. When the average CPU usage of sliding windows is lower than the threshold, CBS flow control is stopped. for recovery Packet queue usage threshold from CBS flow control. When the average packet queue usage of sliding windows is lower than the threshold, CBS flow control is stopped.
SET FCCPUTHD(Optional)
SET FCMSGQTHD(Optional)
ADD UCELLCBSSAC(Mandatory)
ADD UCELLQUICKSETUP(Mandatory)
SET FCSW(Optional)
SET URNCCBPARA(Optional)
SET CERTFILE(Optional)
Switch ofto enable the certificate chain Whether the inner CBS function. DISABLE: indicating that the certificate chain is disabled The MAC-c on Iub interface will increase after ENABLE: indicating that the is supported in the the Enhanced CELL_FACH certificate chain is enabled the UE enters the Enhanced cell. When CELL_FACH state, this parameter determines the guaranteedIub interface will increase that The MAC-c on speed of the MAC-c flow after sends common control channel data on the the the Enhanced CELL_FACH is supported in Iub interface. the UE enters the Enhanced cell. When CELL_FACH state, this parameter determines the maximum speed of the MAC-c flow that sends common control channel data on the Iub interface.
ADD UCELLEFACH(Optional)
ADD UCELLEFACH(Optional)
ADD TRMMAP(Optional)
Primary path that carries the common channel services Common channel primary path load threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the common channel.
ADD LOADEQ(Optional)
ADD TRMMAP(Optional)
Secondary path that carries the common channel services Common channel primary secondary path load ratio threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the common channel.
ADD LOADEQ(Optional)
ADD ETHMA(Optional)
Transmission period of the CCM packet in the MA A protection timer started after the BGN, END, RS, and ER message are sent. If it times out, the system resends messages.
ADD SAALLNK(Optional)
ADD ATMTRF(Optional)
SET UCALLSHOCKCTRL(Optional)
When call shock control starts, the AMR_RRC number can be accessed per second for cell.
ADD USMLCCELL(Optional)
ADD USMLCCELL(Optional)
ADD UCELLALGOSWITCH(Optional)
ADD UEXT3GCELL(Mandatory)
CPC_HS_SCCH_LESS_OPER_SUPPORT (CPC HS-SCCH less operation support indicator): when the indicator is TRUE, it indicates that the cell supports CPC HS-SCCH less operation. 15) HSPAPLUS_MIMO_SUPPORT (MIMO support indicator): when the indicator is TRUE, Average altitude of cell cell coverage area in it indicates that the the supports MIMO. the WGS-84 coordinates. This is controlled by 16) HSPAPLUS_UL_16QAM_SUPPORT MTRLGY and valid when MET~0(metric the (uplink 16QAM support indicator): when system). is TRUE, it indicates that the cell indicator supports uplink specifies the average This algorithms with the above values altitude parameter 16QAM. TheFLEX_MACD_PDU_SIZE_SUPPORT 17) cell coverage area in the WGS-84 of the represent are asPDU Size support indicator): (flexible MAC-d follow: coordinates. This is controlled by MTRLGY TX_DIVERSITY_ON_TO_OFF:When TX when the when IMP~1(British measurement). indicator is TRUE, it indicates that and valid is on to off,the algorithms of cell Diversity the cell supports flexible MAC-d PDU Size. capacity auto handle is open. 18) FDPCH_SLOT_FORMAT_SUPPORT (FTX_DIVERSITY_OFF_TO_ON:When TX the DPCH slot format support indicator): when Diversity is TRUE, it indicates that thecell indicator is off to on,the algorithms of cell capacity auto handle isformat. supports F-DPCH slot open. 19) HSPAPLUS_DL_64QAM_SUPPORT (downlink 64QAM support indicator): when the indicator is TRUE, it indicates that the cell supports downlink 64QAM. Altitude of the cell center in the WGS-84 coordinates. This is controlled by MTRLGY Latitude of the cell center in the WGS-84 and valid when MET~0(metric system). coordinates. The value corresponding to the This parameter specifies the altitude of the [A latitude A degrees B minutes C seconds is cell center in+ (C/3600)] / 0.000001. This is + (B/60) the WGS-84 coordinates. controlled by MTRLGY and valid whento the For example, the value corresponding IMP~1(British measurement). 36 seconds is latitude 31 degrees 30 minutes [31 + (30/60) + (36/3600)] / 0.000001 = 31510000. This is controlled by GCDF and valid when Longitude of theformat). cell center in the WGS-84 DEG~0(degree specifies the latitude of the cell This parameter value corresponding to the coordinates. The center in the WGS-84 coordinates.The input [A longitude A degrees B minutes C seconds is format is + (C/3600)] / 0.000001.is controlled by + (B/60) ddd:mm:ss.ssss. This GCDF and valid when SEC~1(degree, to the For example, the value corresponding minute, second format). longitude 121 degrees 40 minutes 36 seconds is [121 + (40/60) + (36/3600)] / 0.000001 = 121676666. This is controlled by GCDF and valid when DEG~0(degree specifies the longitude of the This parameter format). cell center in the WGS-84 coordinates.The input format is ddd:mm:ss.ssss. This is controlled by GCDF and valid when SEC~1(degree, minute, second format).
ADD USMLCCELL(Optional)
ADD USMLCCELL(Optional)
ADD USMLCCELL(Optional)
ADD USMLCCELL(Optional)
ADD USMLCCELL(Optional)
ADD USMLCCELL(Optional)
HO UCELL(Mandatory)
ADD USMLCCELL(Optional)
ADD UCELLRLPWR(Mandatory) ADD UCELLSELRESEL(Mandatory) ADD UPRACHACTOASCMAP(Mandatory) ADD URESERVEOVSF(Mandatory) ADD UAICH(Mandatory) ADD UBCH(Mandatory) ADD UCELLCBSDRX(Mandatory) ADD UCELLDYNSHUTDOWN(Mandatory) ADD UCELLEFACH(Mandatory) ADD UCELLHSDPA(Mandatory) ADD UCELLCAC(Optional) UCELLHSUPA(Mandatory) ADD UCELLMBMSFACH(Mandatory) ADD UCELLMBMSPARA(Mandatory) ADD UCELLMBMSSA(Mandatory) ADD UCELLMBMSSCCPCH(Mandatory) ADD USMLCCELL(Optional) ADD UCELLMCCH(Mandatory) ADD UCELLSETUP(Mandatory) ADD UCELLSIBSWITCH(Mandatory) ADD UCELLURA(Mandatory) ADD USMLCCELL(Optional) ADD UCHPWROFFSET(Mandatory) ADD UCTCH(Mandatory) ADD UFACH(Mandatory) ADD UFACHDYNTFS(Mandatory) ADD UFACHLOCH(Mandatory) SET UCALLSHOCKCTRL(Optional) ADD UPCCPCH(Mandatory) ADD UPCH(Mandatory) ADD UPCHDYNTFS(Mandatory) ADD UPCPICH(Mandatory) ADD UEXT3GCELL(Optional) ADD UPICH(Mandatory) ADD UPRACHASC(Mandatory) ADD UPRACHBASIC(Mandatory) ADD UPRACHSLOTFORMAT(Mandatory) UPRACHTFC(Mandatory) ADD GPS(Mandatory) ADD UPSCH(Mandatory) ADD UCELLQUICKSETUP(Mandatory) ADD URACH(Mandatory) ADD UCELLRLACTTIME(Mandatory) ADD URACHDYNTFS(Mandatory) ADD UCELLCBSSAC(Mandatory) ADD USCCPCHBASIC(Mandatory) ADD USCCPCHTFC(Mandatory) ADD USSCH(Mandatory) BLK UCELL(Mandatory) CHK UCELL(Mandatory) HO UCELL(Mandatory) ADD UINTRAFREQNCELL(Mandatory) ADD UINTERFREQNCELL(Mandatory) ADD UCELLINTRAFREQHO(Mandatory) UCELLCMCF(Mandatory) ADD USMLCCELL(Mandatory) ADD UCELLHOCOMM(Mandatory) ADD UCELLINTERFREQHOCOV(Mandatory) ADD UCELLDRD(Mandatory) ADD UCELLINTERFREQHONCOV(Mandatory) ADD UCELLFRC(Mandatory) ADD UCELLINTERRATHOCOV(Mandatory) ADD UCELLREDIRECTION(Mandatory) ADD UCELLINTERRATHONCOV(Mandatory) ADD UCELLHCSHO(Mandatory) ADD UCELLQOSHO(Mandatory) ADD UCELLMBDRINTERFREQ(Mandatory) ADD UCELLMBDRINTERRAT(Mandatory)
Defining the radio environment type of the cell, such as a typical town cell, urban cell, and mountain area cell. Deviation of altitude standard in the cell coverage area in the WGS-84 coordinates. This is controlled by MTRLGY and valid when MET~0(metric system). the standard This parameter specifies deviation of altitude in the cell coverage area in Meaning: Specifies the host the WGS-84 coordinates. type of a cell. This parameter specifies MTRLGY and valid when This is controlled by the host type of a cell in the case that measurement). IMP~1(Britishthe RNC node redundancy feature is enabled. When this parameter is set to "SINGLEHOST", the cell is controlled by When call shock control starts, the register to only one RNC. When this parameter is set and 3G->2G reselect "SECHOST",be accessed per "PRIMHOST" or number can the cell is second forby two RNCs (a primary RNC and a controlled cell. secondary RNC). By default, the cell is controlled by the primary RNC. When the primary RNC is faulty, the cell is controlled by the secondary RNC.
ID of the cell to which a GPS receiver belongs Uniquely identifying a cell. For detailed information of this parameter, refer to 3GPP TS 25.401. Meaning: ID of a cell. For detailed information about this parameter, refer to 3GPP TS 25.401. Uniquely identifying a cell. For detailed information of this parameter, refer to 3GPP TS 25.401.
ADD UEXT3GCELL(Mandatory)
ADD U2GNCELL(Mandatory)
Uniquely identifying a WCDMA cell, to which neighboring GSM cells can be added.
SET UCIDCHG(Optional)
SET UCIDCHG(Optional)
ADD USMLCCELL(Optional)
Flag of CELLID+RTT location activation. UE positioning mode when the CELLID+RTT method is selected. The UE supports both UEbased CELLID+RTT mode and UE-assisted CELLID+RTT mode. Cell SF reserved threshold. The code load reshuffling could be triggered only when the minimum available SF of a cell is higher than this threshold.
SET USMLC(Optional)
ADD UCELLLDR(Optional)
ADD UCELLLDB(Optional)
Identifying a cell name. exceeds this threshold, If the cell downlink load the algorithm will decrease the pilot transmit If the times the UE in the CELL_PCH state power of the cell so as to is greater the whole performs cell reselection increase than or system'sthe threshold, itparameter is that the equal to capacity. This is regarded based on network planning. frequent. When the timer cell reselection is expires, the target state is set to URA_PCH. In the next cell update procedure, the UE is informed of state transition to URA_PCH in the CELL_UPDATE_CONFIRM message. timer. Length of the cell reselection frequency This parameter is used together with CellReSelectCounter to detect the frequency of cell reselection of the UE in the CELL_PCH Indicating whether the cell is reserved for state. extension. If [Cell barred indicator] is NOT_BARRED, and the cell is not reserved for operators but for extension, the UEs regard the cell as barred. For detailed information of this parameter, refer to 3GPP TS 25.331.
SET UUESTATETRANS(Optional)
SET UUESTATETRANSTIMER(Optional)
ADD UCELLACCESSSTRICT(Optional)
ADD UCELLACCESSSTRICT(Optional)
ADD UINTRAFREQNCELL(Optional)
Flag of whether adding a cell into the active set Indicating the relative threshold of the event will affect whether the cell is reserved for operators. If the status of cell is 1A. NOT_BARRED,is a flag of whether adding the This parameter and the cell is reserved for operators, the UEsset will affect the relative cell intowhether adding a cell with Access set active allocated into the Flag of the 15 in the local PLMN can active or Class 11 or the event 1A NOT_AFFECT: threshold the relative threshold of the select will affect of cell. While the UEs allocated with event reselectthe cell into the active set does not Adding the 1B. Access Class 0~9, 12 and 14 cannot select or affect the relative thresholdwhether adding the of the event This parameter is a detailed information1A. reselect the cell. Forflag of UE evaluate of The into the active set willthe cell signal will affect affect the relative cell this parameter,1A should occurre.25.331. 3GPP TS AFFECT: whether event refer to1B NOT_AFFECT: threshold of the event Adding the cell into the active set affects the Adding the cell into the active set does not relative threshold of the event the event 1B. affect the relative threshold of 1A. The cell signal will not affect the UE evaluate whether The cell signal will affect the UE evaluate event 1Aevent 1B should occur. AFFECT: whether should occurre. Adding the cell into the active set affects the relative threshold of the event 1B. The cell signal will not affect the UE evaluate whether event 1B should occur. When the RRC REQ total number of one cell reach this threshold the RRC flow control will be triggered. If the cell downlink load is lower than this threshold, the algorithm will increase the pilot transmit power of the cell so as to share load of other cells. This parameter is based on network planning. CPU usage threshold for cell update. When the average CPU usage of sliding windows reaches or exceeds the threshold, cell update control is triggered. Packet queue usage threshold for cell update. When the average packet queue usage of sliding windows reaches or exceeds the threshold, cell update control is triggered. CPU usage threshold for recovery from cell update control. When the average CPU usage of sliding windows is lower than the threshold, cell update control is stopped. for recovery Packet queue usage threshold from cell update control. When the average packet queue usage of sliding windows is lower than the threshold, cell update control is stopped.
ADD UINTRAFREQNCELL(Optional)
SET UCALLSHOCKCTRL(Optional)
ADD UCELLLDB(Optional)
SET FCCPUTHD(Optional)
SET FCMSGQTHD(Optional)
SET FCCPUTHD(Optional)
SET FCMSGQTHD(Optional)
SET FCSW(Optional)
SET CERTFILE(Mandatory)
Name of the certificate chain file This parameter identifies whether to configure RAC. If the RNC supports the PS domain, this parameter must be set to REQUIRE.
SET UCORRMALGOSWITCH(Optional)
1CS+2PS, and 2PS. 10) CFG_PDCP_IPV6_HEAD_COMPRESS_SWIT CH: When the switch is on and the PDCP header compression license is activated, the PDCP header compression algorithm for IPv6 is used at the RNC. ThisCFG_PDCP_RFC2507_HC_SWITCH: 11) parameter indicates whether RAC is configured. If the is on and the PDCP IPHC When the switch RNC supports the PS domain,is activated, the PDCP IPHCmust be license the value of this parameter header REQUIRE. algorithm is used for the RNC. compression 12) CFG_PDCP_RFC3095_HC_SWITCH: When the switch is on and the PDCP ROHC license is activated, the PDCP ROHC header compression algorithm is used for the RNC. Confirm password. The confirm password is required to ensure that a correct password is entered.
ADD OP(Mandatory)
ADD OP(Optional)
SET CCGN(Optional)
SET UCOIFTIMER(Optional)
This parameter is valid only when the operator belongs to the custom level. This parameter specifies the value of the handover protection timer. If services can be set up on channels based on a higher Name of the command group. Youis technique after channel handover can define the name. the handover protection timer will completed, be started. When the timer expires, the RNC will try to carry services on channels based on a higher technique. Channel retry cannot be performed before this timer expires. the This parameter specifies the value of channel retry timer. The timer will start after traffic is set up or reconfigured, if higher technique is available. Channel retry will be performed after this timer expires. The coding type of a transport channel.For detailed information of this parameter, refer to 3GPP TS 25.212. Number of ping check timeouts. The parameter indicates the number of timeout record failures.
SET UCOIFTIMER(Optional)
ADD UFACH(Optional)
ADD IPPATH(Optional)
SET UMBMSPERF(Mandatory)
STR IPCHK(Optional)
Detection index. The index is a unique value ranging from 0 to 511 if it is not specified.
ADD IPPATHBIND(Mandatory)
Detection index
ADD SCTPLNK(Optional)
ADD SCTPLNK(Optional)
Whether to perform checksum when sending message Checksum arithmetic type. According to the RFC4960, the ALDER32 algorithm is not applicable to the SCTP checksum. The CRC32 is recommended. If you set this parameter to TEN_MSEC, use Type of the detection that is performed specify [DL basic meas rprt cycle,Unit:10ms] to between the BSC report period. If you set this the measurement and the gateway. parameter to MIN, use [DL basic meas rprt cycle,Unit:min] to specifyto TEN_MSEC,report If you set this parameter measurement use period. For detailed cycle,Unit:10ms] to specify [DL OLC meas rprt information of this parameter, refer to 3GPP TS 25.433. set this the measurement report period. If you parameter to MIN, use [DL OLC meas rprt If you set this parameter to TEN_MSEC, use cycle,Unit:min]pwr meas cycle,Unit:10ms] to [HSDPA need to specify measurement report period. For measurement report of this If you specify the detailed information period. parameter, refer toto MIN,TS 25.433. need set this parameter 3GPP use [HSDPA pwr meas cycle,Unit:min] to specify measurement parameter to TEN_MSEC, use If you set this report period. For detailed information of this parameter, refer to 3GPP [HSDPA bit rate meas cycle,Unit:10ms] to TS 25.433. measurement report period. If you specify the set this parameter to MIN, use [HSDPA bit rate Value cycle,Unit:min] to specify measurement range: meas set this TEN_MSEC, MIN If you parameter to TEN_MSEC, Physical valueFor detailed information of use report period. range: 10 milliseconds, 1to [HSDPA bit rate meas cycle,Unit:10ms] this minute parameter, measurement report period. If you refer to 3GPP TS 25.433. specify the you set this parameter to Content: If set this parameter[ULMIN, use [HSDPA bit rate TEN_MSEC, use to basic meas rprt meas cycle,Unit:min] to specify measurement cycle,Unit:10ms] to specify the measurement report period. For detailed information of this report period. If you set this parameter to MIN, parameter, refer to 3GPP TS 25.433. to use [UL basic meas rprt cycle,Unit:min] specify measurement report period. For detailed information of this parameter, refer to If you set this parameter to TEN_MSEC, use 3GPP TSmeas rprt cycle,Unit:10ms] to specify [UL OLC 25.433. Recommended value: TEN_MSEC the measurement report period. If you set this parameter to MIN, use [UL OLC meas rprt cycle,Unit:min] to specify measurement report period. For detailed information of this parameter, refer to 3GPP TS 25.433.
ADD SCTPLNK(Optional)
STR IPCHK(Mandatory)
SET ULDM(Optional)
This parameter specifies the reporting period of the event E of the AMR service. The unit of the reporting period can be 10 ms or minute. This parameter specifies the reporting period of the event E of the BE service. The unit of the reporting period can be 10 ms or minute. This parameter specifies the reporting period of the event F of the BE service. The unit of the reporting period can be 10 ms or minute. This parameter specifies the reporting period of the event E of the VP service. The unit of the reporting period canwhether to or minute. This switch determines be 10 ms take statistics of the performance based on the MBMS channel. One MBMS service is defined as a channel for independent MBMS measurement. It is set according to the topographic feature. This parameter is used for the inter-RAT handover decision in combination with the neighboring cell oriented CIO. The larger the sum, the higher the handover priority of the Identifying a GSM cell. in this parameter The CIO value smaller the sum, the lower the GSM cell. The specified cooperates with the the GSM cell. The handover priority of neighboring cell oriented CIO. For details about the meaning of this parameter is generally set to 0. parameter, refer to 3GPP TS performance: As for the impact on network 25.331 and the descriptionthe[CIOOffset]. parameter is, the The larger of value of the easier it is to be handed over to the GSM network. The smaller the value of the parameter is, the harder it is to be handed over Neighboring cell oriented Cell to the GSM network. with theIndividual Offset This parameter works offset of (CIO). neighboring cell-oriented defines the Cell Individual Offset Content: This parameter (CIO). It is used for intra- cell individual offset. neighboring cell oriented or inter-frequency handover decisions. For details, refer to 3GPP The set value functions in combination of the TS 25.331. CIO. Their sum is added to the cell oriented measurement quantity before the cell, which is Cell individual offset for the GSM UE evaluated whether an event has occurred. In set according to the topographic feature. handover algorithms, this parametermaking for This parameter is used for decision is used for moving thehandover. a cell. the inter-RAT border of The larger the value of the parameter, the higher the handover priority of the GSM cell. The smaller the value of the parameter, the lower the handover priority of the GSM cell.
SET UMBMSPERF(Mandatory)
ADD UEXT2GCELL(Mandatory)
ADD UEXT3GCELL(Optional)
ADD UEXT2GCELL(Optional)
ADD UCELLSETUP(Optional)
ADD U2GNCELL(Optional)
ADD IPLOGICPORT(Optional)
ADD MPGRP(Optional)
SET CLKTYPE(Mandatory)
ADD UCELLSETUP(Optional)
ADD UNODEBLMTPARA(Optional)
SET UCORRMALGOSWITCH(Optional)
SET USTATETIMER(Optional)
EXP LOG(Optional)
ADD CCG(Mandatory)
ADD SUBCMD(Mandatory)
SET UCORRMALGOSWITCH(Optional)
window buffer requirement of the RAB to be setup. When the switch is not on, the RAB assignment request is rejected. 8) CMP_UU_SERV_CELL_CHG_WITH_ASU_S WITCH: When the switch is on, the active set update is in the same procedure as the change of the serving cell. When the switch is not on, the serving cell is changed after the UE updates the active set and delivers reconfiguration of physical channels. This Error clear threshold. switch is applicable only to R6 UEs. 9) CMCF algorithm switch. CMP_UU_SERV_CELL_CHG_WITH_RB_MO 1) CMCF_DL_HLS_SWITCH: is on, channel D_SWITCH: When the switch When the switch Type of the clock board procedure as the is on, the is in the same transition compressed mode supports DL higher-layer alarm to be When the switch change of the serving cell. Whether the scheduling. queried is cleared. is 2) CMCF_UL_HLS_SWITCH: When the or not can select "cleared" changed after switch Youon, the serving cell is or "uncleared",the UE is on,of them. By default, both of delivers performs compressed mode supports are both the channel transition and them UL higher-layer scheduling. channels. reconfiguration of physical selected. 3) This parameter specifies the startup direction 10) CMCF_UL_PRECFG_TOLERANCE_SWITCH: of compressed mode that the NodeB supports. CMP_UU_VOIP_UP_PROC_AS_NORMAL_P When the switch is on, the switchactivationthis - UL_ONLY: By default,the compressed mode S_SWITCH: The NodeB supports is on. In of Indicating in the compressed mode time adjust whether only in of the the Alternative E-bit the uplink. compressed mode the Closed loop precase, UE is not configured for mode in the cell is supported. configurationThe NodeB supports activation of - DL_ONLY: state can be different from that L2. required by mode traffic. compressedcurrent only in the downlink. 11) CMP_UU_FDPCH_COMPAT_SWITCH: 4) - UL_DL_BOTH: The NodeB supports When the switch is OFF, if the information CMCF_WITHOUT_UE_CAP_REPORT_SWIT activation of compressed mode in both uplink element that indicates the F-DPCH capability CH: downlink. RNC starts inter-frequency or When and type of the the message of UE exists in cell. CM the inter-RAT measurement, the RNC checks the "RRC_CONNECT_REQ" or information of whether the compressedFmode "RRC_CONNECT_SETUP_CMP", the on the The CMCF for measurement on the frequency is required parameters are configured DPCH capabilitytype of the cell. After that, the depends on that indicator. In basis of the cells in measurement list. The of the CM band case, it means UE does not support Fother specify the number of CM sequences. cell can information should be reported bythe UE in DPCH. When the switch is ON, if the RRC connect setup complete message. When information element that indicates the F-DPCH the switchof UE and noin the message has capability is on exists such information been reported, the RNC starts the compressed "RRC_CONNECT_REQ" or mode and then delivers the measurement. "RRC_CONNECT_SETUP_CMP", the FDPCH capability depends on that indicator. If A timer to RNC wait for the response to that information element does not exist, UE common transport channel resources request supports F-DPCH when all the conditions in the Iur common transport channel meets: a) the version of UE is Release 6. b) procedure. UE supports HS-PDSCH. 12) CMP_UU_AMR_DRD_HHO_COMPAT_SWIT Name of the command to be queried. Youset CH: When the switch is on, When SRB is can select DCH, and RNC decides to setup the up on one or more commands. AMR through DRD procedure, RNC will execute blind handover to the target cell, and then setup the AMR RBs on the target cell. 13) can select one or more commands. You CMP_IU_QOS_ASYMMETRY_IND_COMPAT _SWITCH: When the Iu QoS Negotiation function is active and the switch is on, IE RAB Sequence number of is Symmetric string of Asymmetry Indicator the command the scheduled subtask. and downlink RNC bidirectional, The uplink negotiation rate is asymmetric, RNC select the bigger rete as Iu QoS negotiation rate. When the switch is OFF, RNC select the less rate as Iu QoS negotiation rate.
ADD CAB(Mandatory)
ADD UTYPRABBASIC(Mandatory)
ADD UCELLRLPWR(Mandatory) SET UIUTIMERANDNUM(Mandatory) ADD UCNNODE(Mandatory) ADD UNRIGLBCNIDMAP(Mandatory) ADD UIMSIIDNNSCNIDMAP(Mandatory)
ADD UCNNODE(Mandatory)
This parameter specifies whether the service is Identifies the or PS service. a CS service type of a CN. - CS_DOMAIN: Circuit Switched domain service - PS_DOMAIN: Packet Switched domain service Status of a CN node. The status needs to be negotiated with the CN and is configured through the MML command. A CN node can be configured type of following status: Identifying the with thea CN. 1. Normal: This value indicates that the UE can access the CN node normally. 2. Offload: If the UE carries "NullNRI" in the initial direct transmission message, the UE Identifies a CN the CN node. If the UE carries cannot access node NullNRI in the initial direct transmission message, the UE can access the CN node. 3. Inhibited: This value indicates that the UE cannot access the CN node normally.the Resource management mode. When interface type is IUB, the value can be set to SHARE or EXCLUSIVE. When the interface type is IUR, IUCS, or IUPS, the value can be set to SHARE only.
ADD ADJMAP(Mandatory)
CMP LICENSE(Optional)
SET LICENSE(Optional)
operator index.
Cn operator name.
ADD UEXT3GCELL(Mandatory)
This parameter specifies the index of the operator group that serves the cell.
ADD UCELLCBSSAC(Mandatory) SET UIUTIMERANDNUM(Mandatory) ADD UCNNODE(Mandatory) ADD UNRIGLBCNIDMAP(Mandatory) ADD UIMSIIDNNSCNIDMAP(Mandatory) ADD UEXT2GCELL(Mandatory) ADD UCNOPERATOR(Mandatory) ADD URNCCBCPUID(Mandatory) SET UOPERATORCFGPARA(Mandatory) ADD UCZ(Mandatory) UCBSADDR(Mandatory) ADD UCNOPERGROUP(Mandatory) ADD UCELLMBMSSA(Mandatory) ADD UCNOPALLCELLBLK(Mandatory) ADD ULAC(Mandatory) ADD RSCGRP(Mandatory) ADD UMBMSSA(Mandatory) ADD ADJMAP(Mandatory) ADD UNODEB(Mandatory) ADD URAC(Mandatory) ADD USAC(Mandatory) ADD USAMBMSPARA(Mandatory) ADD UURA(Mandatory)
Indicates a CN operator.
ADD UNRNCURA(Mandatory)
Cn Operator index.
ADD UCELLDSACMANUALPARA(Mandatory)
ADD UCNOPERGROUP(Mandatory)
Identifies a CN operator.
ADD UCNOPERGROUP(Mandatory)
Identifies a CN operator.
ADD UCNOPERGROUP(Mandatory)
Identifies a CN operator.
ADD UCNOPERGROUP(Mandatory)
Identifies a CN operator.
ADD UCNOPERGROUP(Optional)
ADD UCNOPERGROUP(Mandatory)
ADD UCNNODE(Mandatory)
EXP ALMLOG(Optional)
Number of returned alarm records. By default, all records can be returned in each query. Assume that this threshold is not 0. When the Maximum number of records on H. If thethe Code reshuffle switch of alarm blink timesswitch accumulated number based allowed in operationthe threshold, the by the is reported. is enabled, code occupied alarm R99 service exceeds log is adjusted toward codes with small numbers. For querying the alarm blink measurement When see "LST ALMBLKSW". For setting the period,[Allocate Code Mode] is set to Automatic, measurement period, see "SET by alarm blink code can be used not HSDPA the Assume that this threshold is 0. increases and HSDPA throughput isWhen ALMBLKSW". blink times is smaller than the number of alarm improved.To enlarge the throughout of HSDPA threshold,NodeB automatic codeFor querying when the the alarm is reported. algorithm is the alarmit's recommended that the sharing enabled, blink measurement period, see "LST ALMBLKSW". For HSDPAthe alarm be free as codes adjacent to setting code to blink measurementcan, when the [Code Adjust possible as it period, see "SET ALMBLKSW". switch forcode tree reshuffle user number H-based Hsdpa] is set to ON,the RNC will select R99When the code adjusting which will threshold. UE to do switch is enabled, if the free the of userscodes adjacent toreshuffled is number sharing on the tree to be HSDPA code. no greater than this parameter, the reshuffle is allowed. Otherwise, the reshuffle is given up. This parameter limits the number of users involved in one reshuffle so that the triggering This parameter specifies one of reshuffle on lots of users at a time is avoided. (The other conditions of code balancing DRD. condition is the minimum spreading factor.) This condition refers to that the code occupancy in the best cell is not the triggering This parameter specifies one of lower than the value of this parameter. conditions of code balancing DRD. (The other condition is the minimum spreading factor.) This condition refers to that the code occupancy in the best cell is not the triggering This parameter specifies one of lower than the value of this parameter. conditions of code balancing DRD. (The other condition is the code occupancy.) This condition refers to that the minimum spreading factor of the best cell is not smaller than the This parameter specifies one of the triggering value of this parameter. conditions of code balancing DRD. (The other condition is the code occupancy.) This condition refers to that the minimum spreading factor of the best cell is not smaller than the value of this parameter.
SET LOGLIMIT(Optional)
SET ALMBLKPARA(Optional)
SET ALMBLKPARA(Optional)
ADD UCELLHSDPA(Optional)
ADD UCELLHSDPA(Optional)
ADD UCELLDRD(Optional)
SET UDRD(Optional)
ADD UCELLDRD(Optional)
SET UDRD(Optional)
ADD UCELLDRD(Optional)
SET UDRD(Optional)
ADD UCELLLDR(Optional)
SET URNCCBPARA(Optional)
ADD UFACH(Optional)
This parameter specifies whether the code balancing DRD algorithm will be applied. - ON: The code balancing DRD algorithm will be applied. - OFF: The code balancing DRD algorithm will This parameter specifies whether the code not be applied.The balancing DRD algorithm will be applied. DR_RAB_SING_DRD_SWITCHalgorithm will the message code scheme.the in SET - ON: The code balancing DRD enum value as UCORRMALGOSWITCH should be enable.If it below: be applied. isOFF: The code balancing DRD algorithm will 0000 German service,the - combinationvalid only when the interThis switch is 2D/2F measurement thresholds DR_RAB_COMB_DRD_SWITCH should be Type English 0001 of event not be applied.The switch is enabled. TRUE frequency enable. handover and inter-RAT when inter-frequency 0010 Italian DR_RAB_SING_DRD_SWITCH in SET means that inter-frequency handover is measurements coexist. should be enable.If it 0011 French UCORRMALGOSWITCH congestion. FALSE selected in code resource COEXIST_MEAS_THD_CHOICE_INTERFRE 0100 Spanish service,the is combination means that inter-frequency handover is not Q: choosing 0101 Dutch the inter-frequency oriented be DR_RAB_COMB_DRD_SWITCH should selected in code resource congestion. This parameters as 0110 Swedish event 2D/2F measurement enable. parameter should be set based on network thresholds for 0111 Danish inter-frequency measurement. resource usage. In the case of multi-frequency COEXIST_MEAS_THD_CHOICE_INTERRAT: 1000 Portuguese coverage,the inter-RAT oriented parameters as choosing if code resources present a 1001 Finnish bottleneck, such as indoor environment, the event 2D/2F measurement thresholds for inter1010 Norwegian parameter is recommended to be set to TRUE. RAT Greek 1011 measurement. When you set 1100 Turkish the previous parameters, consider the following factors: event 2D/2F 1101 Hungarian measurement 1110 Polish thresholds for inter-frequency measurement, inter-frequency 1111 Language unspecified and inter-RAT handover decision thresholds, and current handover policy. For example, if the event 2D The coding rate of a transport channel. For threshold for inter-RAT measurement is higher detailed information of this parameter, refer to than that for inter-frequency measurement, 3GPP TS 25.212. cells are preferred when and inter-frequency inter-RAT and inter-frequency of thecoexist, For a PTM service, if the ratio cells intrathen you can choose the service is frequency cells where COEXIST_MEAS_THD_CHOICE_INTERFRE transmitted in PTM mode to the intraQ. frequency cells of a cell reaches the percentage specified by this parameter, the cell has gains in combining. Then, the power of the FACH carrying the service in the cell decreases by "SoftCombPwrOffset". The relative power margin of combined traffics, used to calculate the triggering threshold of event F, can avoid the fluctuation of traffic rate in case the power becomes restricted after rate is increased.
SET URNCMBMSPARA(Optional)
SET UMBSCCRRM(Optional)
This parameter defines the period of the measurement reporting from BSC to RNC. This parameter determines whether Common PLMN ID is used when the RNC sends the INIT UE MESSAGE to the CN.
SET UOPERATORSHARINGMODE(Optional)
SET PWDPOLICY(Optional)
Complexity of the password This parameter specifies the interval between the initial alignment failure and the next initial alignment.
ADD SAALLNK(Optional)
ADD SAALLNK(Optional)
This parameter specifies the period of time required by a specific SSCF to assign a link. This parameter specifies the interval between two consecutive packets sent by thein queue 0 If the duration for buffering the data SSCF for verification at the link verification stage. is less than or equals to the value of this parameter, flow control is canceled. For the flow control adopting the ATM, this parameter indicates the recovery threshold for congestion If the duration for buffering the data in queue 1 in lessCBR queue. is the than or equals to the value of this parameter, flow control is canceled. For the flow control adopting the ATM, this parameter indicates the recovery threshold for congestion If the duration for buffering the data in queue 2 in lessRTVBR queue. to the value of this is the than or equals parameter, flow control is canceled. For the flow control adopting the ATM, this parameter indicates the recovery threshold for congestion If the duration for buffering the data in queue 3 in lessNRTVBR queue. the value of this is the than or equals to parameter, flow control is canceled. For the flow control adopting the ATM, this parameter indicates the recovery threshold for congestion If the duration for buffering the data in queue 4 in lessUBR queue. is the than or equals to the value of this parameter, flow control is canceled. For the flow control adopting the ATM, this parameter indicates the recovery threshold for congestion in the UBR+ queue. If the duration for buffering the data in queue 5 is the duration for buffering the data in queue 0 If less than or equals to the value of this parameter, flow equals to the value of this is more than or control is canceled. parameter, flow control is triggered. For the flow control adopting the ATM, this parameter indicates the threshold for congestion in the 1 If the duration for buffering the data in queue CBR queue. or equals to the value of this is more than parameter, flow control is triggered. For the flow control adopting the ATM, this parameter indicates the threshold for congestion in the 2 If the duration for buffering the data in queue RTVBR than or equals to the value of this is more queue. parameter, flow control is triggered. For the flow control adopting the ATM, this parameter indicates the threshold for congestion in the 3 If the duration for buffering the data in queue NRTVBR queue. is more than or equals to or equals to the value of this parameter, flow control is triggered. For the flow control adopting the ATM, this parameter indicates the threshold for congestion in the UBR queue.
ADD SAALLNK(Optional)
ADD PORTFLOWCTRLPARA(Optional)
ADD PORTFLOWCTRLPARA(Optional)
ADD PORTFLOWCTRLPARA(Optional)
ADD PORTFLOWCTRLPARA(Optional)
ADD PORTFLOWCTRLPARA(Optional)
ADD PORTFLOWCTRLPARA(Optional)
ADD PORTFLOWCTRLPARA(Optional)
ADD PORTFLOWCTRLPARA(Optional)
ADD PORTFLOWCTRLPARA(Optional)
ADD PORTFLOWCTRLPARA(Optional)
ADD PORTFLOWCTRLPARA(Optional)
ADD PORTFLOWCTRLPARA(Optional)
ADD UCELLACCESSSTRICT(Mandatory)
SET UDRD(Optional)
ADD UCELLACCESSSTRICT(Optional)
ADD SUBRACK(Optional)
ADD UCELLSELRESEL(Optional)
ADD UCELLSELRESEL(Optional)
ADD UCELLSELRESEL(Optional)
ADD UCELLSELRESEL(Optional)
measurement for cell selection and reselection is set to CPICHvalue of It is serving to thecells The hysteresis RSCP. the related FDD slow fading featuremode in case the quality is in connected of the area where the cell located. The greater the slow fadingreselection measurement for cell selection and variance is,set to CPICH Ec/No. It is related to the slow is the greater this parameter. According to the R regulation, the current If the duration forthe area where the in queue 4 fading feature of buffering the data cell is serving cell involves in toslow value of this the is more than or equals cell selection variance located. The greater the the fading after measurement value is added with the the parameter, flow control is triggered.parameter is, the greater this parameter. This For hysteresis value. when itsATM, this255. flow control adopting the value is parameter is not configured The measurement hysteresis aims to prevent theregulation, the current cell indicates the the R ping-pong effect of the According to threshold for congestion in the reselection, involves in cell selectionslow fading UBR+ queue. serving cell which is caused by the after the when the UE is on the added with the The measurement value is edge of the cell. ping-pong effect may trigger frequent location hysteresis value. The measurement in queue 5 hysteresis If the durationmode), URA in connected mode updatesprevent thethe UE updates of the cell (idle for buffering the data Indicating whether ping-pong effect aims to than or equals to the value of this is more to access updates (CELL_FACH, (URA_PCH), or cell the cell. by the slow fading is allowed which is caused When the cell reselection,flow control is triggered. parameter, and thus increase thethe UEs in CELL_PCH), is on the edge of that cell. The statustheBARRED, it indicates the redirection when is UE specifies the RRC load of This parameter and the consumption is UE network signalingare trigger idle mode of Indicating effect may barred frequent location connectedwhether onlyUE in to select/reselect ping-pong mode the when the strategy.toSet valid another intra-frequency is a proper measurement batteries.It reselect allowed (idle mode), URA emergency the cell even in the case ofupdatesON. calls. updates DR_RRC_DRD_SWITCH is whenpossible hysteresis toinformation much asto[Cell barred reduce as cell. This parameter updates set For detailed redirection is not(CELL_FACH, (URA_PCH), CPICH is valid measurement - OFF:of the SIB4]fading of this parameter, Offset of for or cell RSCP allowed. cell TS is BARRED. as ensuring effecttoRRC slow 25.331. well If this as indicator refer 3GPPand thus increase the load of CELL_PCH), - Only_To_Inter_Frequency: Only RRC tothe value cell is ALLOWED, UE. According the timely in cell selection or the UE in when UE parameter updates of thereselectionconnected network connected mode. consumption of signaling and the redirectionselect another report of is allowed. to emulation intra-frequency UE is inRSCPinter-frequency cells inter- cell CPICH mode canSet a proper measurement batteries. - Allowed_To_Inter_RAT: Both offset in cell is This parameter handovers,cell RRC frequency hard is used much as possible when the cell reduce as for the measurement condition hysteresis to selection/reselection and redirection to inter-frequencyNOT_ALLOWED, selection cell CPICHdBm to measurement set hysteresis rangesfading asis5 cells ensuring 4 Ec/No dBm satisfied.thethis parameter During cell is Offset of If to inter-RAT cells areas and of and reselection. well allowed. effect redirection the cellcannot corresponding to reselection, slow offset the slow when the to 4UEcellby selection thereselectionfading intrathe dBm idle mod of or UE. According to the value cell default timely inin updates when select another CPICH Ec/No The indicator thatbe CPICH varianceconnected mode. is 8 dB and frequency cell.is QOffset2sn, can distance is 20 UE is inRSCP emulation report of to CPICHis QOffset1sn.the relative forneglected interRSCP ofcells where the slow fading in cell idle m. Inparameter handovers,cell measurement the hard is used for For detailed in case emergency Idle isthe offset variance calls. used This frequency Conn for connected mode. mode,and the reselection. During cell 3GPP is and of this parameter, refer to of UEs is low informationranges 4 dBm to 5 dBm and is set selection and average moving speed hysteresis ConnQoffset1sncell offset corresponding to high, for exampleand ConnQoffset2sn are valid TS425.331. the the suburbs slow countryside, reselection, default when the and fading to dBm by only when measurement hysteresis CPICH reduce the SIB12Ind = TRUE,thatdistance is 20 CPICH Ec/No is QOffset2sn, namely, the to to variance is 8 dB is existing. SIB12 message and the relative for idle guarantee timely locationslow fading UEs. The updates of variance RSCP is cells where Idle is used m. In the QOffset1sn. the CPICH measurement Offset of neighboringconnected mode. the less higherand the average moving speed of UEs is the mode, and Conn for cell hysteresis is, is low Thismeasurement usedcell RSCP Whether toforvariousthe power for reselectionsin connect Threshold parameter is of monitoring value.it is for inter-frequency cell reselection likely for exampleandtypes ConnQoffset1sn the ConnQoffset2sn are valid high, suburbs and (CPICH board connected mode. When the qualitycountryside, measurement. The offset is subtracted from to occur, and the better the slow fadingthe only when SIB12Ind UE) of the serving cell is reducemeasured by measurement value before measurement hysteresis to Ec/No the capability = TRUE, namely, the the neighboring cell is, but resistance timelyis existing. the slower SIB12than guarantee this threshold plus the [Qqualmin] of updates of UEs. The lower message the environment changes. For cell reselection. location CPICH measurement systemthe measurement hysteresis is, the less reacts to Offset ofthe inter-frequency neighboring cell higher reselection algorithm,cell reselection is the cell, information of this parameter, refer in In cell Thisfor intra-frequencythis parameter to detailed for various types of cell reselections Threshold parameter is usedcell Ec/No value.it is will be started. This for reselection likely for moving the border of a cell. This is not procedure mode. parameter used TS 25.304. When the subtracted from 3GPP and the better the slow fading connected measurement. The offset is quality (CPICH to occur, can be configured by the Radio configured its the UE) of the serving parameter whencell value is 127. The intra-cell Ec/No measured the neighboring by measurement valuehigher resistance cell reselection has aslower the but the priority before frequency capability is, according to [Qqualmin] Networkthan this threshold plus the reality. is lower Planner(RNP) cell reselection. the environment changes. system reactsQOffset1sn and QOffset1sn, For to thandetails the intra-frequency cell reselection For the inter-frequency cell reselection andis of the cell, of In cell reselection algorithm, this parameter to detailed3GPP reselection, the intra-frequency inter-RAT cell TS started. This parameter is refer to information of this parameter, refer not procedure25.304. 25.331. of a cell. This will be used for moving 3GPP the impactthe border performance: cell reselection start threshold should be As for TS can beonvalue is 127.the Radio configured parameter when its network by The intraconfigured higher thanthe value of the parameter, the The larger cell reselection has acell reselection frequency the inter-frequency priority higher Network Planner(RNP) according reselection to reality. start threshold and inter-RAT cellneighboring lowerthe inter-frequency cell reselection and than the probability of selecting For details of QOffset1sn reselection threshold and QOffset1sn, start threshold. If the cell the intra-frequency cells. to 3GPP reselection, the parameter, the inter-RAT cell TS 25.331. refer The smaller the value value, the UE is set the probabilitythreshold so. higherto a comparativelydoingperformance: cellfor the impact on network should be start of high As reselection start cell reselections, and the may frequently inter-frequency cell reselection higher thanthe value of the parameter, the the The largerthe UE may be largely consumed. If battery of start the probability of selecting neighboring inter-RAT cell reselection lowerthreshold and threshold is set to a the cell reselection cell reselection threshold start The smallerthe If cells.threshold.low the valueis difficult for cellthe comparatively value, it the parameter, is set to a comparativelydoing value, the UE higher the probability of high so. UE may not reselections to be started, and the may frequently start cell reselections, and the timely reside in the cells with good quality, If battery of the UE may be largely consumed. affecting the qualitythreshold is set to a the cell reselection of communication between the UTRAN and the UE. For detailed for cell comparatively low value, it is difficult information, refer to 3GPP and 25.304. may not reselections to be started, TS the UE timely reside in the cells with good quality, affecting the quality of communication between the UTRAN and the UE. For detailed information, refer to 3GPP TS 25.304.
ADD UCELLACCESSSTRICT(Optional)
SET CONNTYPE(Mandatory)
ADD UPRACHBASIC(Optional)
This parameter is valid when [Cell barred indicator for SIB4] is BARRED. It indicates that the delay of the cell can be measured next time when [Cell barred indicator for SIB4] is set It is used to calculate the transmit be increased to BARRED. The time barred can power of the first preamble network planning based on the or reduced in in the random access process. The formula is cell is barred. For detailed actual time the as follows: Preamble_Initial_Power = Primary to 3GPP information of this parameter, refer CPICH DL TX power-CPICH_RSCP + UL interference + TS 25.331. Constant Value. Where, Preamble_Initial_Power is the preamble initial Type of thePrimary CPICH DL TX power and TX power, connection between the NE is the EMS or LMT. The (TX) power of PCPICH, downlink transmit connection can be a plain connection or SSL encryptionsignaling code CPICH_RSCP is the receive connection. power of the PCPICH measured by UEs, and UL interference is the uplink interference. For detailed information thethis parameter, refer to Whether to perform of PING operation 3GPP TS 25.211. the continuous PING continuously. When operation is performed, the system sends the PING packets to the specified IP address. You can stop the PING operation by using CTRL + Q.
PING IP(Optional)
SET UUSERMBR(Optional)
This parameter specifies the DL MBR of conversation for DRNC HSPA User. The MAC-c on Iub interface will increase after This parameter specifies theis supported in the the Enhanced CELL_FACH UL MBR of conversation for DRNC HSPA User. cell. When the UE enters the Enhanced CELL_FACH state, this parameter determines the guaranteedIub interface will increase that The MAC-c on speed of the MAC-c flow after sends conversational service data on the in the the Enhanced CELL_FACH is supported Iub interface. the UE enters the Enhanced cell. When CELL_FACH state, this parameter determines the maximum speed of the MAC-c flow that sends conversational service data on the Iub interface.
SET UUSERMBR(Optional)
ADD UCELLEFACH(Optional)
ADD UCELLEFACH(Optional)
Maximum rate of the narrowband AMR speech service for copper users.
Maximum rate of the wideband AMR speech service for copper users.
PING MAC(Optional)
Transmitted packets
SET UCNTCHK(Mandatory)
SET UCNTCHK(Optional)
ADD UEXT3GCELL(Optional)
This parameter indicates whether the cell supports CP1 mode transmit diversity.
ADD UCELLSETUP(Mandatory)
This parameter indicates whether the closed loop TX diversity mode 1 supported. CPU usage threshold for call paging control. When the average CPU usage of sliding windows reaches or exceeds the threshold, call paging flow control is triggered. CPU usage threshold for recovery from call paging control. When the average CPU usage of smooth windows is lower than the threshold, The threshold used by CPUS process system. call paging flow control is stopped. of this When the equivalent user number CPUS system is over this threshold, latter calls will be transferred to other CPUS process system until equivalent user number is bellow This parameter specifies the number of this CPUS traffic share when the priority of subframes transmitted threshold. reporting CQI is higher than the priority of transmitting patterns on the UL DPCCH in DTX mode after one HS-DSCH reception. For details, refer to the 3GPPthe CQI feedback This parameter specifies TS 25.214 protocol. cycle in DTX-DRX mode. Currently, the value of this parameter can be set to only D2 because the NodeB supports only D2. For details, refer to the 3GPP TS 25.214 protocol. The field indicates whether the cross-connect path is available. When the cross-path is available, a maximum of four IP paths exists. Name of IP enable thethe IP path revocation list The four the certificate certificate between the Whether to paths are revocation list file first local IP address that DISABLE: indicating and the first peer IP certificate address, the IP disabled revocation list ispath between the first local IP address and the second peer IP address, the ENABLE: indicating that the certificate IP path between enabled the revocationnumber of second local IP address Maximum list is IP address, and the This cell reselection. IP path and the first peer parameter, along with the [Time for evaluating between the second local IP address and the max cellpeer IP address. When the cross-path second reselection], is used for rate evaluation in HCS. For details, refer to 3GPP is unavailable, a maximum of two IP paths TS 25.304. two IP paths are the IP path exists. The between the first local IP address and the first peer IP address and the IP path between the second local IP address and the second peer IP address.
SET FCCPUTHD(Optional)
SET FCCPUTHD(Optional)
SET UCPUSSHARETHD(Optional)
SET UDTXDRXPARA(Optional)
SET UDTXDRXPARA(Optional)
SET CERTFILE(Mandatory)
SET CERTFILE(Optional)
ADD UCELLHCS(Optional)
ADD SCTPLNK(Optional)
SET SHARETHD(Optional)
CPU usage threshold for call RRC connection load sharing. When the CPU usage reaches or exceeds the threshold, call RRC connection load sharing iscontrol threshold for call RRC Packet usage triggered. connection load sharing. When the packet queue usage reaches or exceeds the threshold, call RRC connection load sharing is triggered. CPU usage threshold for recovery from RRC connection load sharing. When the CPU usage is lower than the threshold, call RRC connection load sharing is stopped. Packet queue usage threshold for recovery from RRC connection load sharing. When the packet queue usage is lower than the threshold, call RRC connection load sharing is stopped.
SET SHARETHD(Optional)
SET SHARETHD(Optional)
SET SHARETHD(Optional)
ADD TRMFACTOR(Optional)
ADD TRMMAP(Optional)
ADD LOADEQ(Optional)
R99 CS conversational service primary path R99 CS conversational primary path load threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the CS conversational service.
ADD TRMMAP(Optional)
ADD LOADEQ(Optional)
R99 CS conversational service secondary path R99 CS conversational primary secondary path load ratio threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the CS conversational service. CS domain Relocation GSM load THD. This parameter specifies the CS service WCDMA R99 CS conversational domain uplink relocation GSM load threshold. When the GSM factor load policy is used, that is, when [NcovHoOn2GldInd] in SET INTERRATHONCOV is set to ON, the CS domain inter-system relocation out process will number of Erlangs for voice services. cell be stopped if the GSM system send its load to the RNC and the cell load exceeds the CS domain Reloc GSM load THD. Otherwise, the RNC does not stop the CS domain intersystem relocation out process.
ADD TRMFACTOR(Optional)
SET LICENSE(Optional)
SET UOPERATORCFGPARA(Optional)
SET UOPERATORCFGPARA(Mandatory)
Cs domain Information Update protection timer. This parameter specifies feature mode of operators in the CS domain. You should Indicating the network resource identifier (NRI) configure whether the cell allows CS service inter-RAT handover. is supported. when MOCN or Iu-Flex ON: CS service inter-RAT handover is enabled. OFF: CS service inter-RAT handover is Network Resource Identity(NRI) length for CS disabled. domain. handover refers to the handover Service attribute and related parameter configuration on the network side for each service. When a service is established, the related Specifies whether to impose the access measurements and inter-RAT handover are restriction on the CS domain. immediately triggered. These two switches are enabled only for service handover; generally, they are disabled by default. Whether to impose the access restriction on Note that the service handover is enabled only the CS domain. when the handover attribute is set to HO_TO_GSM_SHOULD_BE_PERFORM and CS service inter-RAT handover is set to ON. Both conditions are mandatory. For hybrid services, the service handover is not triggered.
SET UOPERATORCFGPARA(Optional)
SET UOPERATORCFGPARA(Mandatory)
ADD UCELLDSACMANUALPARA(Mandatory)
SET UDSACAUTOALGO(Mandatory)
ADD UCELLHOCOMM(Optional)
ADD TRMFACTOR(Optional)
ADD TRMMAP(Optional)
R99 CS streaming service bearer primary path R99 CS streaming primary path load threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the CS streaming service.
ADD LOADEQ(Optional)
ADD TRMMAP(Optional)
R99 CS streaming service bearer secondary path CS streaming primary secondary path R99 load ratio threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the CS streaming service.
ADD LOADEQ(Optional)
ADD TRMFACTOR(Optional)
SET UCORRMALGOSWITCH(Optional)
complete information of RB, TrCH, and PhyCH, which are in the HANDOVER TO UTRAN COMMAND message is used. 3) CS_IUUP_V2_SUPPORT_SWITCH: When the switch is on and the "Support IUUP Version 2" license is activated, the RNC supports the TFO/TRFO function. 4) CS_ZERO_C_AMR_CFG_TWO_CODCH_SW WCDMA R99 CSswitch is on, the AMR speech streaming ITCH: When thespecifies the service uplink of This parameter factor at a maximum rate ofchannel type service services. 7.95 kbit/s is CS voice carried Both two DCHs. downlink are preferably over uplink and When the switch is not - DCH: on, the on DCH. carried narrowband AMR speech service at a maximum rate of 7.95 kbit/s is carried over - HSPA: Uplink is preferably carried on E-DCH, three DCHs. is preferably carried on HSand downlink DSCH. In particular, both uplink and downlink will be carried on DCH if either uplink cannot be carried on E-DCH or downlink cannot be This parameter specifies the relative delay for carried on HS-DSCH. CS traffic over the jitter correction of the downlink HSPA specifies the relative delay for This parameter channel. This parameter indicates the maximum CS delay for the uplink jitter correction of the CS traffic over the traffic transmitted to the UE. For details, see 3GPP HSPA channel. The CS data is buffered on the TS 25.331. and then sent to the higher layer PDCP layer in packets after CFN plus CSVoiceHspaUlRelDelay. In this way, the CS Indicates whether the H2D is performed data can be transmitted over the HSPA before the channel at regular intervals. relocation procedure when the CS services are carried on the HSPA. If this parameter is set to OFF, the HSPA This parameter specifies the TTI type used for needs to be switched back CS servicesbefore the relocation procedure. If to the DCH over the uplink HSPA channel. this parameter is set to ON, the HSPA need not be switched back to the DCH before the relocation procedure. Uniquely identifying a TFC on the physical Self-healing switch forparameter value channel. The specific the Ethernet adapter traffic monitoringCTFCSize (2 bits: 0~3, 4 bits: depends on the 0~15, 6 bits: 0~63, 8 bits: 0~255, 12 bits: 0~4095, 16 bits: 0~65535, 24 bits: 0~16777215). For detailed information of this parameter, refer to 3GPP TS 25.433. Maximum number of bitslength of the Calculated TFC (CTFC) of the Calculated Transport Format Combination (CTFC) of on Transport Format Combination Set (TFCS) Transport Format Combinationvalue(TFCS). the SCCPCH. This parameter Set is related to the maximum number of Transport Format Combinations (TFCs) on the transport channel. For detailed information of this parameter, Critical threshold of CPU usage. When the refer to 3GPP TS 25.433. CPU usage in "Fast judgement window" reaches or exceeds the threshold, all active flow control functions are implemented. Otherwise, the corresponding flow control mechanism is used.
SET UFRCCHLTYPEPARA(Optional)
SET UFRC(Optional)
SET UFRC(Optional)
SET UFRC(Optional)
ADD UNRNC(Optional)
SET SLFSLVSW(Optional)
ADD UPRACHBASIC(Optional)
ADD USCCPCHBASIC(Optional)
SET FCCPUTHD(Optional)
SET FCMSGQTHD(Optional)
Critical threshold of packet queue usage. When the packet queue usage reaches or exceeds the threshold, all active flow control functions areoffset should be added to the The sharing implemented. target subrack or subsystem. This parameter is used for preferable selection of the homing Forwarding threshold of control plane load subrack and homing subsystem during callthe sharing. When the CPU usage is between forwarding. sharing threshold and overload threshold, and call number in each second reaches "SharingOutCAPSMidLoad", new arrival call attempts will be shared out to other UMTS CPUS.
SET UCTRLPLNSHAREPARA(Optional)
SET UCTRLPLNSHAREPARA(Optional)
ADD RSCGRP(Mandatory)
Slot number of the MPU Subsystem for the centralized management of the resources Configuration rollback control switch that is used to specify whether to support the configuration rollback function.
SET CMCTRLSW(Mandatory)
ADD VPCLCX(Mandatory)
VPL/VCL cross type This parameter is used to check whether the Uniquely identifying astate. If the UE is on UE in the low activity classified zone. The value channel, the low activity denoted by DCH of Classified Zone ID is counter decimal numerals. time traffic volume event increases by 1 every 4B is reported. If the UE is on FACH channel, the low activity counter increases by 1 if the traffic volume is 0 in the traffic volume event 4B report. Pending time after the traffic volume event 4B for state transition from DCH to FACH is When the traffic volume is below the 4B reported. This remains so is used period threshold and parameter for the to prevent too many traffic volume events 4B being reported. specified by this parameter, the event 4B is reported. This parameter prevents unnecessary traffic volume events that are caused by traffic volume instability from being triggered.
ADD UCZ(Mandatory)
SET UUESTATETRANS(Optional)
SET UUESTATETRANS(Optional)
SET UUESTATETRANS(Optional)
ADD OP(Optional)
SET TIME(Optional)
Date
SET UDCCC(Optional)
SET UINTRAFREQHO(Optional)
prohibited, but rate reduction is not prohibited. Such penalty strategy is applied in the following scenario: If there is a cell, for some reason, it has high signal strength but heavy load, and cannot join the active set throughout by then. This cell After enter the SHO rate reductionis received, may the 1A measurement report evaluation the rate is reduced to the threshold rate for soft process repeatedly, which results in rate handover in the active set. If the cell this to and the timer reductionfor adjustment specified by fails PS Strategy of the cannot the rate of be parameter starts. The DL ratethe active set join service when the UE is in the CELL_DCH BE the active set, the rate expires. increased before timer in may increase during the evaluation process state. RATE_UP_AND_DOWN_ON_DCH because of the DCCC over the DCH avoid indicates that the rate algorithm. To can be such rate lowered. RATE_UP_ONLYaindicates raised or fluctuation, the RNC uses strategy of rate increase penalty after the SHO failure that the rate over the DCH can only be raised. again. UE is in low activity state, it is no need When to degrade the traffic rate to the threshold for DCCC before state transition to CELL_FACH. That means UE can transit to CELL_FACH Length of the penalty period within which the stateof aany rate. rate at BE service cannot be increased even if theparameter specifies the constant that is This 4A measurement report is received. Increasethe the BE service rate is triggered by used by of RNC to compute the This parameter specifies the number will not the 4A measurement report.4A reportof used DPCCH_Power_Offset whichperiod of DCH is further This parameter specifies the which no event measurement until this the UL be the UE to calculate during Timerperforms expires. by processed periods Penalty throughput to DCH throughput is reported 4B related ratio measurement.Macd DPCCH_Initial_Power during the and reports open-loop statistic of traffic an event 4B is reported. This again control. The formulasDCHas follows: such volume on powerafterwhich are used fornumber of This parameter 4B events is setspecifies the are rate the channel parameter to avoid too many DPCCH_Power_Offset =servicemomentonDL measurement periods from the set up when decrease process of BE Primary CPICH reconfiguration operations. The larger Constant TX DCH + UL interference 4B threshold the powerrate falls below the + Default the to DCH. of this parameter, the longer the time value Value the moment when the throughput-related event from the lastis triggered. This parameter is set DPCCH_Initial_Power = 4B on DCH reporting of throughput-related event 4Bunnecessary reports reporting, by DCH DPCCH_Power_Offset - next triggered and to avoid on DCH to the CPICH_RSCP the smaller fluctuation. The larger the value of where DPCCH_Power_Offset is the DPCCH throughput the possibility of triggering throughput-related event 4B on DCH. initial transmit (TX) longer the required this parameter, the power offset, Primary CPICH DL the DCH is the downlink TX below duration of TX powerthroughput keeping power of P-CPICH, and and the smaller the the 4B threshold, CPICH_RSCP isthe received signal code power of the P-CPICH possibility of triggering throughput-related measured byDCH. event 4B on the UE. A small value of DPCCH_Power_Offset might This parameter specifies the default operator lead to uplink synchronization failure at cell that RNC chooses in thethus affecting the edges during link setup, MOCN cell. The value 255 meansA large value ofoperator is uplink coverage. that no default defined. DPCCH_Power_Offset, however, has instantaneous interference ondownlink open When the RNC is performing uplink reception, thus affecting the uplink reception power control, it evaluates link consumption performance.the PCPICHof CPICH_RSCP, according to For details TX power and the refer to the 3GPP TS 25.331. PCPICH signal intensity detected in UE access. However, in some cases, the UE may not report the signal intensity. In this situation, the RNC uses this parameter to evaluate link consumption.
SET UDCCC(Optional)
SET UDCCC(Optional)
SET UDCCC(Optional)
ADD UTYPRABDCCCMC(Optional)
ADD UTYPRABDCCCMC(Optional)
SET UOPERATORSHARINGMODE(Optional)
SET UFRC(Optional)
ADD UCELLCAC(Optional)
ADD IMAGRP(Optional)
Maximum delay difference between links in the same IMA group This parameter specifies the delay time. When the RNC recovers from disaster and starts to operate, it performs re-host policy for the primary hosted NodeB after the specified delay time.
SET UPOOLPRIMHOSTPOLICY(Mandatory)
ADD UTYPRABOLPC(Mandatory)
Delay class number. Each delay class number indicates a specified delay time range of Iub transmission. Delay class number. Each delay class number indicates a specified delay time range of Iub This parameter specifies the threshold of code transmission. occupancy offset between the current cell and the target cell when code balancing DRD is applied. Only when the cell code occupancy offset reaches this threshold can a neighboring cell be selected to be a candidate cell for DRD. The actual minimum required RX level = the minimum required RX level ([Qrxlevmin]) + the extended minimum required RX level ([DeltaQrxlevmin]). Actual minimum required RX level = minimum required RX level + extended minimum required RX level. For details, refer to the 3GPP TS 25.304 protocol.
ADD UTYPRABRLC(Mandatory)
SET UDRD(Optional)
ADD UEXT3GCELL(Mandatory)
ADD OP(Optional)
PING IP(Mandatory)
Destination IP address
TRC IPADDR(Mandatory)
Destination IP address
ADD IPRTBIND(Mandatory)
Destination IP address
ADD DEVIP(Mandatory)
SET FTPSSRV(Mandatory)
Whether to use the customized port DEFAULTPORT: indicating that the FTP server uses the default port 21 as a command Device IP Address Type port to provide FTP port and port 20 as a data services CUSTOMPORT: indicating that the FTP server uses the customized port to provide FTP services
ADD GPS(Optional)
ADD DHCPRLY(Mandatory)
ADD DHCPRLY(Mandatory)
DHCP Relay ID There are two combination methods for uplink combination of soft handover: command can Day in the month on which theone is maximum ratio combination at the NodeB Rake receiver, be executed. which gives the highest combination gain; the other is selective combination at the RNC, which gives a relatively smaller combination Day in thedefaulton which the indication switch gain. The week value of the command can beMAY, which means the NodeB decides is executed. whether to implement maximum ratio combination according to its own physical This parameter specifiesis selected, the NodeB conditions; path MUST the direction that the The relativewhen in the working path of the traffic volume measurement is applicable to. is forced in the FTP maximum ratio FTP userto carry out server - DOWNLINK: indicates downlink traffic volume combination which is usually used in tests; measurement. when MUST_NOT is selected, the NodeB is - UPLINK:to carry out maximum ratio forbidden indicates uplink traffic volume measurement or E-DCH throughput combination. measurement. Consider the working status AMR DL activity factor of the R99 (test/normal operation) and service. Signals environment conversational the propagation might be when deciding whether to implement of the discontinuously transmitted because softer combination and to adopt which kind of softer activation detection of conversational service combination. and source changes of data service. The activity factor is defined as the ratio of signal transmission time to channel occupation time. The activity factors of the same transport channel might when the AMRUL and DL.is Duration from be different in TX power beyond the threshold Ea or below the threshold Eb to when the event Ea or Eb is triggered. This parameter is used to avoid faulty reporting due to instability of power.
ADD SUBTSK(Mandatory)
ADD SUBTSK(Mandatory)
ADD UTYPRABDCCCMC(Mandatory)
SET UHOCOMM(Optional)
SET UADMCTRL(Optional)
SET UADMCTRL(Optional)
SET UFRC(Optional)
SET UFRCCHLTYPEPARA(Optional)
DL activity factor of the R99 background service. Signals might be discontinuously transmitted because of the activation detection of conversational service and source changes of data service. The activity factor is defined as the ratio of signal transmission time to channel occupation time. The activity factors of the same transport channel might be the valuein L3 filtering coefficient. The larger different of UL and DL. this parameter, the stronger the smoothing This parameter specifies the rate threshold effect and the higher the anti-slow-fading for the decision tothe lower PS domainchange capability, but set up a the signal background/interactive service information of tracing capability. For detailed on the DCH in the parameter, refer to 3GPP TS 25.433. this downlink. Only when the DL service rate is higher than or equal to this threshold, or thefor This parameter specifies the rate threshold UL service ratesethigherPS domain or equal the decision to is up a thanDL initial to the This parameter specifies the will be setaccess uplink threshold, the service on the DCH in up on background/interactive service rate used when HSDPA BE services switch to DCH. Otherwise, the service DLset up on CCH. is service rate is downlink. Only when the DCH. to the product the According or equal to this threshold, oronly specifications, the higher than the service rate is higher than or equal to the background/interactive services whose rate UL is lower than 16 kbit/s can be carried on the uplink threshold, the service will be set up on CCH. Therefore, this service is set up on CCH. DCH. Otherwise, the parameter can only be set to 16 kbit/s orproduct specifications, only According to the 8 kbit/s. the background/interactive services whose rate is lower than 16 kbit/s can be carried on the CCH. Therefore, this parameter can only be set to 16 kbit/s or 8 kbit/s. DL BE traffic Initial bit rate. When DCCC function is enabled, the downlink initial bit rate This parameter specifies the rate threshold for will be set to this value if the downlink max bit decision to use HS-DSCH to carry DL PS rate is higher than the initial bit rate. domain background/interactive services. When the maximum DL service rate is higher than or equal to this threshold, the service will be carried on HS-DSCH. Otherwise, it willis Duration from when the BE TX power be carried on DCH. beyond the threshold Ea to when the event Ea is triggered or from when the BE TX power is below the threshold Eb to when the event Eb is triggered. This parameter are used for Different within which the measured power Duration admission policies is used to avoid faulty reporting dueandinstability of power.for dedicated channel threshold is allowed being lower than theto common channel users. For common channel users, to avoid BE service. This parameter is used resources instead of separate power admission decision faulty reporting due to instability of power. If are parameterForset to A, the hysteresis time is the reserved. is dedicated channel users, according A x 10 ms.to the current load factor and the characteristics of the new call, the CAC algorithm predicts the new TX power with the assumption of admitting the new call, then plus Length of smoothing filter window of downlink with the premeditated common channel DL CAC. load factor to get the predicted DL load factor. Then, compare it with the DL admission threshold. If the value is not higher than the threshold, the call is admitted; otherwise, rejected. threshold of the total cell downlink Admission power. If the value is too high, too many users will be admitted. However, the throughput of a single user is easy to be limited. If the value is too low, cell capacity will be wasted.
ADD UCELLFRC(Optional)
SET UFRC(Optional)
SET UFRCCHLTYPEPARA(Optional)
ADD UCELLCAC(Optional)
ADD UCELLCAC(Optional)
ADD UNODEBLMTPARA(Optional)
ADD URESERVEOVSF(Mandatory)
ADD UCELLCAC(Optional)
ADD UCELLCAC(Optional)
is applicable to algorithm 1 and algorithm 2. The parameter is used for controlling the AMR service admission. the conversational nonThis parameter of That the compression The percentagespecifiesis, when an AMR service that the NodeBto the evaluates method is accessing, the RNC100% the the AMR service threshold supports in downlink measurement value to algorithm 1 and downlink. applicable of the downlink load after load. It is the servicereduction by If the DL load - SF/2: SF2.is accessed.two is used for of a cell algorithm The parameter isHIGHER_LAYER_SCHDL:afteradmission. of - higher than this threshold higher layer controlling the non-AMR service the access an AMRwhen a non-AMRthis serviceaccessing, scheduling That is, speech service, service is will be rejected. evaluates the measurement value of If both SF/2 and HIGHER_LAYER_SCHDL are the RNC If the DL load of a cell will not be higher than this threshold, service of will selected, the load after the this both is the be the downlink NodeB supports service admitted. If methods in the cell is higher than compressionthe DL load of a downlink. accessed. The threshold after the access include this DL load factor thresholds of a non-AMR parameters of [DL threshold willConv non_AMR speech service, this service of be rejected. If service], [DLof a cell will not be threshold] and handover the DL loadthe DL codeaccess higher than this Number of to be reserved. For [DL threshold of other services]. The four threshold, this service will TS admitted. details, refercanthe 3GPPto limit the proportion to be used be 25.213 protocol. parameters factor thresholds include The DL load between theof [DL threshold service, handover parameters conversational of Conv non_AMR user and [DL handover access threshold] and service], other services in a specific cell, and to guarantee the other services]. of the [DL threshold of access priority The four conversational AMR service. parameters can be used to limit the proportion between of users selected inservice, handover Number the conversational a DL LDR CS user and other services in a specific handover. domain inter-RAT SHOULDBE load cell, and to guarantee the access priority of the are The target subscribers of this parameter conversational non-AMR service. the CS domain subscribers. Because the CS domain subscribers are session subscribers in Number of users selected in a DL LDR CS general inter-RAThave little impact on load, domain and they SHOULDBE load handover. you can set this parameter to parameter are The target subscribers of this a comparatively high value. the CS domain subscribers. Because the CS domain subscribers are session subscribers in Number of users selected in a DL LDR CS general inter-RAThave little impact on load, domain and they SHOULDNOTBE load you can set this parameter to a comparatively handover. The target subscribers of this high value.are the CS domain subscribers. parameter Becauseof users domain subscribers are Number the CS selected in a DL LDR CS session inter-RAT SHOULDNOTBEthey have domain subscribers in general and load little impact on load, you can set thisthis handover. The target subscribers of parameter to a the CS domain high value. parameter are comparatively subscribers. Because the CS domain subscribers are session subscribers in general and they have Maximum DL rate during can set planning littlea BE service that hasnetworkthis For impact on load, you a low maximum rate, when coveragecomparatively high ensured. parameter algorithm isentire cell is value. to of the not obviously effective the DCCCDL a When the TCP is limited, the current rate is yet it increasesfull coverage rate if theThus, reduced to the algorithm processing. current the traffic-based DCCCfull coverageapplied to rate is greater than the algorithm is rate. For BE services whose maximum DL rate is a BE service that has a low maximum rate, the greateralgorithm threshold. DCCC than the is not obviously effective yet it increases algorithm processing. Thus, the DCCC algorithm is applied to BE services whose maximum DL rate the downlink the This parameter specifies is greater than threshold. bit rate (GBR) of the BE service. guaranteed Some cell resources can be reserved for GBR is the minimum bit rate handover success handover UEs to guarantee that the system can guarantee foraccess priority of it accesses rate and improve the service after handover in. The GBR of none BE service is specified by services. This parameter defines the quantity the RAB assignment fromresources reserved of downlink code and CE the CN. for handover. SFOFF refers to that no resources is reserved. SF32 refers to that a code resource with SF = 32 and its corresponding credit resource are reserved.
ADD UCELLLDR(Optional)
ADD UNODEBLDR(Optional)
ADD UCELLLDR(Optional)
ADD UNODEBLDR(Optional)
SET UDCCC(Optional)
SET UUSERGBR(Optional)
ADD UCELLCAC(Optional)
ADD UCELLCAC(Optional)
ADD UCELLCAC(Optional)
SET UADMCTRL(Optional)
ADD UCELLLDR(Optional)
ADD UCELLLDR(Optional)
ADD UCELLLDR(Optional)
ADD UCELLLDR(Optional)
ADD UNODEBLDR(Optional)
ADD UCELLLDR(Optional)
ADD UNODEBLDR(Optional)
load. It is applicable to algorithm 1 and algorithm 2. The parameter is used for controlling the handover admission. That is, when a service is handing over to a cell, the RNC evaluates the measurement value of the downlink load after the service is accessed. If the DL load of a cell is higher than this threshold after the access, this service will be rejected. If the DL load of a cell will not be higher than this threshold, this service will be admitted. DL power factor for HSUPA user. Reserved factor of the R99 interactive service. DL activity The higher thebe discontinuously transmitted Signals might value is, the more resources reserved of the activationcontrol channel, because for the HSUPA detection of which leads to resource waste. If the value is conversational service and source changes of too low, HSUPA user quality may be impacted. data service. The activity factor is defined as the ratio of signal transmission time to channel occupation time. The activity factors of the same transport channel might be different in The inter-frequencythe LDR is that an action is UL and DL. The mechanism of neighboring cell could be selected as the destination of load handover performed in each [LDR period] and some only when itsselected based on the action rules load remaining space servicescan be selected to process is larger The UE are load than this threshold. The lower the parameter to perform this action. This parameter defines handover only whenfind bandwidth is less than its a qualified target cell is, the easier itnumber of RABs selected in the maximum is to thisthe blind handover. Excessively small value for threshold. executing downlink LDR-AMR voice service of the parameter,the parameter value is too rate reduction. If however makes the target cell easily enter the congestion status. Theand high, the LDR action may fluctuate greatly higher the parameter is,(the state of basic it is over control may occur the more difficult for the inter-frequency blind handover occurs. congestion turns into another extreme--under load). If the parameter value is too low, the Number of RABs selected in a DL LDR BE LDR action has a slow response and the effect traffic rate reduction. In the actual is not apparent, affecting the LDR system, this parameter can performance. be set on the basis of the actual circumstances. If the high-rate subscribersRABs selected in a DL LDR BE Number of occupy a high proportion, set the parameter reduction. In the actual value. If the to a comparatively low system, this traffic ratesmoothing filter window of downlink Length of subscribers occupy a low proportion, high-rate can be set on the basis of the parameter LDR. parameter to a comparatively high set thecircumstances. If the high-rate actual value. Because the basic congestion control subscribers occupy a high proportion, set the algorithm is designed to slowly decreaseIf the parameter to a comparatively low value. cell load, you subscribers this parameter to a high-rate need to set occupy a low proportion, comparatively low to a comparatively high Threshold of SF reserved set the parameter value. in downlink credit LDR. Because the basic LDR is triggered value.The downlink credit congestion control when the SF factor corresponding to the cell algorithm is designed to slowly decrease downlink reservedset thisis higher than the load, you need to credit parameter to a LDR. Reserved SF threshold in downlink credit uplink or downlink value. credit comparativelycredit LDR SF reserved The downlink low the parameter value is, could be triggered threshold. The lower onlyeasier the credit enters the congestionthe when the SF factor corresponding to the downlink reservedthe LDR action is triggered, status, the easier credit is higher than the uplink oreasier the creditexperience is affected. and the downlink user SF reserved threshold. A lower code resource LDR trigger threshold, however, causes a higher admission success rate because the resource is reserved. The parameter should be set based on the operator's requirement. This parameter has the same content as DlLdrFirstAction. The selected actions, however, should be unique.
ADD UCELLLDR(Optional)
ADD UCELLLDR(Optional)
ADD UNODEBLDR(Optional)
ADD UCELLLDR(Optional)
ADD UNODEBLDR(Optional)
successful. If an actionload handover of the RAT SHOULDNOTBE is unsuccessful, the LDR turns to the next action. If an action is PS domain is performed. successful, a parameter is setthe NOACT, or all The LDR takes the actions in to preset the preceding actions are taken, the action is sequence and judges whether each downlink LDR is finished, and the system waits for the successful. If an action is unsuccessful, the next triggering of nextLDR. If an action is LDR turns to the the action. Because each action is performed by its or all successful, a parameter is set to NOACT, algorithm module, the are taken, the downlink the preceding actions LDR algorithm only selects finished, and the system waits for This parameter has the same content as the LDR is users and delivers control messages, the execution result ofselected actions, DlLdrFirstAction. The LDR. action can be next triggering of the each obtained each action is performed by its however, after a delay, and the LDR algorithm Because should be unique. cannot wait for a long time, algorithm only algorithm module, the LDR so the LDR can only judge whether the actions succeed by selects users and delivers control messages, This parameter hasusers are found. as whether candidate the same content be the execution result ofselected actions, DlLdrFirstAction. The each action can no The inter-frequency load handover has obtained shoulddelay, and a however, after QoS of usersthe LDR algorithm impact on the a be unique.so the LDR can cannot wait for long time, and can balance the cell load, so the the actions succeed by only judge whether inter-frequency load handover usually serves as the first action. whether candidate users are found. The BE service rate load handover has noonly The inter-frequency reduction is effective when the DCCC algorithm isand can balance impact on the QoS of users enabled. the cell load, so the inter-frequency load handover usually serves as the first action. The BE service rate reduction is effective only when the DCCC algorithm is enabled. This parameter has the same content as DlLdrFirstAction. The selected actions, Number of RABs selected in a DL LDR however, should be unique. QoS uncontrolled real-time traffic renegotiation. The target subscribers of this parameter are the PS domain content as This parameter has the same real-time subscribers. The setting of in a DL LDR is DlLdrFirstAction. The selected actions, Number of RABs selected this parameter analogous toreal-time traffic service rate however, should be unique. QoS uncontrolled the setting of BE reduction subscriber number. Because the renegotiation. The target subscribers of this number of subscribersdomain real-time parameter are has theperforming QoS This parameterthe PS smaller than the as renegotiationThe settingsame content value of subscribers. may be selected actions, of this parameter is DlLdrFirstAction. The this parameter, for example, the candidate analogous to the be unique. service rate setting of BE however, should subscribers selected number. Because do not reduction subscriber for downlink LDR the meet the QoS renegotiation conditions, you number of subscribers performing QoS must leave some margin when setting value of renegotiation may be smaller than the this parameter to ensure the successcandidate this parameter, for example,cell toof load the the downlink If the ratio DL load of reshuffling.ofselected for the subscriberslower than this threshold, the DL downlink LDR do not capacity is meetreshuffling function of the cell is stopped. load the QoS renegotiation conditions, you must the basic congestion statesetting cell load After leave some margin when of the this parameter to ensure theno longer of load is released, the system success implements reshuffling. the LDR action. Because the load fluctuates, the difference between the LDR release threshold and trigger threshold should be higher than 10%. The ping-pong effect of the preliminary congestion state may occur. This parameter has the same content as DlLdrFirstAction. The selected actions, however, should be unique. This parameter has the same content as DlLdrFirstAction. The selected actions, however, should be unique.
ADD UCELLLDR(Optional)
ADD UNODEBLDR(Optional)
ADD UCELLLDR(Optional)
ADD UCELLLDR(Optional)
ADD UNODEBLDR(Optional)
ADD UCELLLDM(Optional)
ADD UCELLLDR(Optional)
ADD UNODEBLDR(Optional)
ADD UCELLLDR(Optional)
This parameter has the same content as DlLdrFirstAction. The selected actions, however, should be unique. This parameter has the same content as DlLdrFirstAction. The selected actions, however, should be unique. This parameter has the same content as DlLdrFirstAction. The selected actions, however, should be unique. This parameter has the same content as DlLdrFirstAction. The selected actions, however, should be unique. This parameter has the same content as DlLdrFirstAction. The selected actions, If the ratioshould load of the cell to the downlink however, of DL be unique. capacity is not lower than this threshold, the DL load reshuffling function of the cell is This parameter the basic congestion state of triggered. After has the same content as DlLdrFirstAction. The selected actions, longer the cell load is released, the system no however, should be unique. Because the load implements the LDR action. fluctuates, the difference between the LDR release threshold and trigger threshold should be higher than 10%. The ping-pong effect of the preliminary congestion state may occur. If the DL load state of the cell is lasted longer than this threshold, the DL load state of the cell transfers. specifies the maximum number This parameter of TFCs (Transport Format Combination) allowed in the downlink. The larger the value of this parameter, the larger the number of available TFCs in the downlink.
ADD UCELLLDR(Optional)
ADD UNODEBLDR(Optional)
ADD UCELLLDR(Optional)
ADD UCELLLDR(Optional)
ADD UNODEBLDR(Optional)
ADD UCELLLDM(Optional)
ADD UCELLLDM(Optional)
ADD UNODEBLMTPARA(Optional)
ADD UCELLCAC(Optional)
Reserved DL power factor for MBMS service. Smooth filtering coefficient for DL measured values. The smooth filtering algorithm is used to avoid random interference in measurement reporting. Smoothness is decided by the filtering coefficient of the measurement. This parameter determines whether the downlink intermediate rate uses automatic or manual mode when using 3-step adjustment.
SET UDCCC(Optional)
SET UDCCC(Mandatory)
SET UAMRC(Optional)
SET UAMRCWB(Optional)
SET UADMCTRL(Optional)
ADD UCELLOLC(Optional)
ADD UCELLOLC(Optional)
ADD UCELLLDM(Optional)
ADD UCELLOLC(Optional)
ADD UCELLLDM(Optional)
TFO/TrFO exists before adjusting DL the CN has the associated encoder and the wideband AMR speech rate. If the TFO/TrFO RNC delivers the RATE CONTROL command does not exist, the CN has the associated to the CN and starts the timer. If the TFO/TrFO encoderTF restriction refers to a situation and the RNC delivers the RATE DL fastthe CN has no associated encoder and exists, CONTROL commandis overloaded and where, when the cell to the CN and starts the the localthe TFO/TrFO exists,peerCN has no the the RNC a timer. If RNC delivers to TF can be adjusted to congested, the downlink AMR mode at a command requesting thethe local RNC delivers associated number of blocks transported in restrict the encoder andthe local RNC starts lower level. RNC a command requesting the to theTTI at In addition, ThresholdAfter the peer RNC receiveswhen each peerof the DL intermediate rate the user the of the fast TFAMR MAC layer lower situation DL timer. modemoderefersandathe rate In wideband restriction atcell downlinkadjustment the 3-step reducingused a the AMR mode at a is uses to rate load. for DL level. data, thus it directlythe overloaded and command, localcell is starts the timer. After where, when themode is used for DL addition, the and the manual ofRNCOLC is thatthe action is The mechanism UL and can be adjusted to the lower level for receives thereturns an it congested, thetheadjustment. the peer RNC downlink TFcommand, intermediate rate [OLC period] and some the performed number of blocks transported If each adjustmentin the wideband AMR mode atin information to the local RNC. a restrict uses directly the selected based on the action rules services arethe MAC layer and received of user acknowledgement UL and returns the before each level lower TTI atfor the message is the rate to perform reducing the cell parameter defines the timer expires, the adjustment ofRNC. If the data, thus this action. This downlink load. adjustment informationof RABs selectedDL to the local the in the maximumrate is successful. Otherwise, the AMR speech number OLC is received before The mechanism of message is that an action is the acknowledgement OLC fast restriction. executing downlink[OLC period] and some adjustmentin eachthe adjustment of the DL performed fails. the activity factor ofof the OLC is based on the Selection expires, DL timer are RABs the R99 nonthe action rules services of selected based is AMR on wideband AMRservice. Signalssuccessful. service prioritiesspeech rate conversational action.ARP values and be might bearing to perform the and This parameter defines Otherwise, this adjustment fails. If there the priority indication. The of downlink OLC is is RAB of low priority no discontinuously transmitted because of fast TF the maximumis recommended that the timer be TFO/TrFO, it number conversational service under control. In the actual system, activation detection of entering/exiting the restriction performed in set to 3000 changes of data service. The UlOlcFTFRstrctRabNum and and source ms. OLC status. DlOlcFTFRstrctRabNum can be set on the activity factor is defined as the ratio of signal After the overload is triggered, the RNC basis of the actualto channel occupationhightransmissionexecutes OLC by first If the time. immediately time circumstances. executing rate subscribers occupy asameproportion, The TF restriction. The internal counter is set fast activity factors of the high transport UlOlcFTFRstrctRabNum and UL and DL. channel might be different inexecution. If the incremented by 1 with each DlOlcFTFRstrctRabNum tonot exceed the low number of overloads does comparatively OLC values. If the high-rate subscribers occupy a action threshold, the system lowers the BE low proportion, lowering TF to relieve the service rate by set UlOlcFTFRstrctRabNum Length of smoothing filter window of downlink and DlOlcFTFRstrctRabNum to comparatively overload. If the number of overloads exceeds OLC.values. The higher the parameters are, high the OLC action threshold, the previous the more users are involved in fast TF operation has no obvious effect on alleviating restriction under the same conditions, the the overload and the system has to release quicker the cell load decreases, and the more users to solve the overload problem. The lower user QoS is affected. more likely the users the parameters are, the If the release is load of the cell to the downlink are released,DLan extreme method in reducing User ratio of resulting in negative effect on the capacity is lower recovering parameters are system performance. this threshold, thewhen the cell load and than If the the system DL overload and congestion control function of the excessively high, the overload status value of the cell is coefficient. Thecongested. L3 filteringoverloaded and of the OLC is larger the cell is stopped. Thethe OLC is that an releaseis released slowly.the stronger the smoothing The parameter, of value action this mechanism not be much lower than or threshold should [OLC period] and some performed theeach the anti-slow-fading in higher effect to the OLC trigger threshold, or the close and selected based on the action rules services are capability, but the have a ping-pong effect. The signal change system state may lower theparameter defines to perform this action. This tracing capability. For detailed information of recommendednumber of RABs released in the parameter,difference between the OLC this maximum refer to 3GPP TS 25.433. release threshold and the OLC trigger executing downlink OLC service release. threshold is highersingle10%. It isthe releasing For the users of a than service, desirable to set the two parameters a bit higher given that of RABs means the complete releasing of the the difference between OLC trigger threshold users. The releasing of RABs causes call and OLC release threshold is fixed. drops, so UlOlcFTFRstrctTimes or If the ratio of DL load should be set to a low DlOlcFTFRstrctTimesof the cell to the downlink capacity is not lower of the parameter get the value. Higher values than this threshold, the DL load to decrease more obviously, but the cell overload and congestion control function of the cell is triggered. The value of the OLC QoS will be affected. release threshold should not be much lower than or close to the OLC trigger threshold, or the system state may have a ping-pong effect. DL OLC trigger hysteresis.This parameter can The recommended difference between the avoidrelease threshold and the OLC trigger OLC touching off OLC event continually. threshold is higher than 10%. It is desirable to set the two parameters a bit higher given that the difference between OLC trigger threshold and OLC release threshold is fixed.
ADD UCELLCAC(Optional)
ADD URESERVEOVSF(Mandatory)
ADD UCELLLDR(Optional)
ADD UNODEBLDR(Optional)
ADD UCELLLDR(Optional)
ADD UNODEBLDR(Optional)
SET UQOSACT(Optional)
SET UQOSACT(Optional)
SET UQOSACT(Optional)
will not be higher than this threshold, this service will be admitted. The DL load factor thresholds include parameters of [DL threshold of Conv non_AMR service], [DL handover access threshold] and [DL threshold of other services]. The four Number of usersbe used to limit the proportion parameters can selected in a DL LDR PS domain inter-RAT SHOULDBE load handover. between the conversational service, handover The and other services in a specific cell, and user target subscribers of this parameter are the PS domain subscribers. In the other to guarantee the access priority of actual system, this parameter can a set on the basis services.of users selected inbe DL LDR PS Number of the actual circumstances. If the high-rate domain inter-RAT SHOULDBE load handover. subscribers occupy a high proportion, set the The target subscribers of this parameter are Orthogonalto a comparatively low value. If the Factor (OVSF) parameter Variable Spreadingthe actual the PS domain to be reserved. For details, of the DL subscribers occupy a low proportion, code subscribers. In high-rate system,the users TS 25.213 a set on the basis parameter can protocol. refer to parameterselected inbe DL LDR PS Number this3GPP to a comparatively high set the of circumstances. If the high-rate of the actual domain inter-RAT SHOULDNOTBE load value. Because the basic congestion control subscribers occupy a subscribers of this the handover. The target high proportion, setcell algorithm is designed to slowly decreaseIf the parameter to a the PS domain low value. In parameter are comparatively subscribers. load, you subscribers this parameter to a high-rate need to set occupy a low proportion, the actual system, value. in a DL can be this parameter LDR PS comparatively low to a comparatively highset Number of users selected set the basis of the actual circumstances. If the on the parameter SHOULDNOTBE load domain inter-RAT value. Because the basic congestionproportion, high-rate subscribers subscribers of this high control handover.is designed occupy a decrease cell algorithm The targetato slowly set the parameter to domain subscribers. In parameter are to PS comparatively low load, you needtheset this parameter to a a low value. If the high-rate subscribers can be set the actual system, this parameter occupy comparatively low value. proportion, set the parameter to a on the basis of the actual circumstances. If the comparatively high value. Because the basic high-rate subscribers occupy a high proportion, congestion controlto a comparatively low to Timer parameter algorithm is designed set thelength for downlink Qos measurement. slowly If the high-rate subscriberslengths for low This parameter controls the time occupy a value. decrease cell load, you need to set this parameter to a the parameter to a value. the inter-frequency and inter-RAT proportion, set comparatively low measurement based on Qos. comparatively high value. Because the basic After inter-frequency or inter-RAT congestion control algorithm is designed to measurement starts, if no you need to set slowly decrease cell load, inter-frequency this handover is performed when this timer expires, parameter to a comparatively low value. the measurement is stopped, and the Rate adjustment switch of link stability control compressed mode is deactivated, if any. If this for DL QoSis set to 0, this indicates that the parameter of AMR services. When the parameter is be started. DL rate of AMR timer will not set to YES, services can be handover switch of link stability For the inter-frequency or inter-RAT Inter-frequency adjusted. measurement QoS ofon coverage, the control for DL based AMR services. When the compressed set to YES, inter-frequency parameter is mode can be stopped through reporting can be performed for AMR that is handover event 2F. For measurementservices not based on QoS. 2F to ensure the coverage, eventlink is not Inter-RATand the timer must be set but should stability reported, handover switch of control set to 0. for DL QoS of AMR services. When the not be parameterimpactto YES, inter-RAT handover As for the is set on network performance: can be performed for AMRlong time to ensure It reduces the influence of services the QoS. compressed mode to the serving cell. The compressed mode may be stopped ahead of time, which can cause the result that the UE fails to initiate inter-frequency or inter-RAT handover, and thus can lead to call link stability Inter-frequency handover switch of drops. control for DL QoS of VP services. When the parameter is set to YES, inter-frequency handover can be performed for VP services to ensure the QoS. Rate adjustment switch of link stability control for DL QoS of WAMR services. When the parameter is set to YES, DL rate of WAMR services can be adjusted.
SET UQOSACT(Optional)
SET UQOSACT(Optional)
SET UQOSACT(Optional)
Inter-frequency handover switch of link stability control for DL QoS of WAMR services. When the parameter is set to YES, inter-frequency handover can be performed for WAMR services tohandover switch of link stability Inter-RAT ensure the QoS. control for DL QoS of WAMR services. When the parameter is set to YES, inter-RAT handover can be performed for WAMR services to ensure the QoS. Frequency hysteresis of downlink RSCP Qos. This parameter controls the used frequency When the switch is on, the congestion interthresholds for the inter-frequency and detection and control for DL R99 service is RAT measurement based on Qos. supported. In event mode, if the inter-frequency and interRAT measurement events whether the DL This parameter determinesoccurred for the downlink Qos reason,minimum rate in one step rate is lowered to the the used frequency threshold of for RSCP measurement quantity or two steps the BE service set up on DCH in is equal to downlink. the used frequency threshold that is configured on the OMU server in coverage This parameter determines whether the DL measurement plus this parameter. rate is the impact onmaximumperformance: As for raised to the network rate in one step or two steps for BE service parameter DCH in The larger the value ofto theset up on is, the This parameter refers the whether the downlink downlink. event 2B, inter-frequency This easily moreparameter determines RL carrying spreading factor usedlimited to the downlink by the compressed mode is handover based onthe CN domain in3A, interevent single service with Qos, and mode istypical SF. Starting the compressed can be resource RAT handover based on Qos, environment. The downlink transmit power consuming for thusfast-movingselection the approach UEs. triggered, and common more timely the basis. CM implementation the services are Whether parameters of factors of the current DCH obtained the spreading handover to the target value of factor is greater When the downlink spreading be performed. by emulation, and the cell can [Downlink channels shouldthis considered value, the SF/2 than or equal to be parameter when the as spreading factor] depends compressed mode switch controllingpreferred.on such factors approach will be the start limitation. the service rate and puncturing Otherwise,For is set. When the switch is be preferred. you high-layer scheduling will set to FALSE, detailed information of compressed mode does can infer that the start this parameter, refer to The SF/2 approach consumes more system 3GPP TS 25.433. not consider the spreading factors of the DCH resources and therefore this approach is channels; when the for low-rate users. The you recommended only switch is set to TRUE, can infer that the start requires variable high-layer scheduling compressed mode considers the spreading transport channels multiplexing positions of factors of the DCH channels. and is applicable to a relatively narrow range. In addition,factor of SRB. Signalsthe DL activity this approach affects might be transmission rate of users and thereforethe discontinuously transmitted because of is recommended only when the SF/2 approach is activation detection of conversational service unavailable changes aredata service. The or there of high-rate users. andactivity factor of the R99 streaming service. DL source activity factor is defined as the ratio of signal Signals might be discontinuously transmitted transmission time to channel occupation time. because of the activation detection of The activity factors of the same transport of conversational service and source changes channel might be different in ULis defined as data service. The activity factor and DL. the ratio of signal transmission time to channel occupation time. The activity rate threshold for This parameter specifies the factors of the same transport channel might be different in decision to use HS-DSCH to carry DL PS UL and DL. domain streaming services. When the maximum DL service rate is higher than or equal to this threshold, the service will be carried on HS-DSCH. Otherwise, it will be carried on DCH.
SET UQOSACT(Optional)
SET UDPUCFGDATA(Optional)
SET UDCCC(Optional)
SET UDCCC(Optional)
ADD UCELLRLPWR(Mandatory)
SET UCMCF(Optional)
SET UADMCTRL(Optional)
SET UADMCTRL(Optional)
SET UFRCCHLTYPEPARA(Optional)
SET UAMRC(Optional)
SET UAMRCWB(Optional)
SET UAMRC(Optional)
SET UAMRCWB(Optional)
SET UAMRC(Optional)
SET UAMRCWB(Optional)
SET UAMRC(Optional)
Threshold E1 of DL AMR speech rate adjustment. Periodical reporting is used for DL measurement. When the value calculated on the basis of the measurement reportspeech Threshold E1 of DL wideband AMR is higher than adjustment. Periodical reporting lowers the rate the upper threshold E1, AMRC is used DL DL measurement. by onethe value for AMR speech rate When level. This parameter on the basis of the measurement calculated specifies the relative threshold. The absolute higher than the upperthe maximum DL report is threshold is equal to threshold E1, TX power minus the relative threshold. AMRC lowers of DL AMR speech rate speech Threshold E2 the DL wideband AMR rate by one level. This parameter specifies the adjustment. Periodical reporting is used for DL relative threshold. The absolutecalculated is measurement. When the value threshold on equal to the the measurement power minus the the basis of maximum DL TX reportspeech is lower Threshold E2 of DL relative threshold. wideband AMR stops than adjustment. Periodical reporting is used the upper threshold E2, AMRC rate adjusting the DL AMRWhen the value for DL measurement. speech rate. This parameter on the basis of the measurement calculated specifies the relative threshold. The absolute lower thanis equal to threshold E2, DL report is threshold the upper the maximum TX power minus the relative threshold. AMR AMRC stops adjusting the DL wideband Threshold F1 of DL AMR speech rate speech rate.Periodical reporting is used for DL adjustment. This parameter specifies the relative threshold. The absolutecalculated is measurement. When the value threshold on equal to the the measurement power minus the the basis of maximum DL TX AMR speech report is lower Threshold F1 of DL relative threshold. wideband than adjustment. Periodical reportingraises the the lower threshold F1, AMRC is used rate DL DL measurement. by onethe value for AMR speech rate When level. This parameter on the basis of the measurement calculated specifies the relative threshold. The absolute lower thanis equal to threshold F1, DL report is threshold the lower the maximum TX power minus the relative threshold. AMRC raises the DL wideband AMR speech Threshold F2 of DL AMR speech rate rate by one level. This parameter specifies the adjustment. Periodical reporting is used for DL relative threshold. The absolutecalculated is measurement. When the value threshold on equal to the the measurement power minus the the basis of maximum DL TX AMR speech report is higher Threshold F2 of DL relative threshold. wideband than adjustment. Periodical reportingstops the lower threshold F2, AMRC is used rate adjusting the DL AMRWhen the value for DL measurement. speech rate. This parameter on the basis of the measurement calculated specifies the relative threshold. The absolute higher than the lower the maximum DL report is threshold is equal to threshold F2, TX power minus the relative threshold. AMR AMRC stops adjusting the DL wideband speech rate. This parameter specifies the relative threshold. The absolute threshold is equal to the maximum DL TX power minus the relative threshold. 2 is used, this parameter When the algorithm defines the total equivalent user number corresponding to the 100% downlink load. The parameter should be related to the admission thresholdfrom when the VP TXof the network. Duration and actual condition power is beyond the threshold Ea or below the threshold Eb to when the event Ea or Eb is triggered. This parameter is used to avoid faulty reporting due to instability of power.
SET UAMRCWB(Optional)
ADD UCELLCAC(Optional)
ADD IMAGRP(Optional)
ADD EMU(Optional)
Door status alarm switch As an integer, the DSP code can be expressed by a decimal digit or a hexadecimal digit. If the DSP code is expressed by a hexadecimal digit, H' is added before the number. This parameter specifies the number of consecutive subframes that can be transmitted on the UL DPCCH during one DtxCycle1. For details, refer to the 3GPP TS 25.214 protocol. This parameter specifies the number of consecutive subframes that can be transmitted on the UL DPCCH duringwhether the DPCCH This parameter specifies one DtxCycle2. For details, refer or the 3GPP TSformat 4 protocol. slot format 1 to DPCCH slot 25.214 is used when all the traffic and signaling are transmitted over the HSPA channel and when the number of feedback information (FBI) bits is 0.
ADD N7DPC(Mandatory)
SET UDTXDRXPARA(Optional)
SET UDTXDRXPARA(Optional)
SET UFRC(Optional)
ADD N7DPC(Mandatory)
ADD UEXT3GCELL(Optional)
The indicator shows the preferred transmission diversity mode of DPCH for MIMO to choose. This parameter specifies the DL power control mode. DPCH diversity mode for MIMO user.mode, - SINGLE_TPC, a fast power control indicates that a unique TPC command is sent in each timeslot on the DPCCH. - TPC_TRIPLET_IN_SOFT, a slow power This parameter indicates the preferred transmit control mode, of the DPCH. diversity modeindicates that the same TPC command is sent over three timeslots. It is DSP type. applicable to soft handover, and CS control IUCS: indicates the IU interface it can decrease the power deviation. point. plane and user indicates the TX This parameter plane signaling diversity - TPC_AUTO_ADJUST, an automaticthe IU IUPS: indicates the by DPCH.point of preferably selected signaling adjustment mode, indicates that the value of interface PS control signaling plane. DPC_MODE can be modified by sending the IUR: indicates the signaling point of the base ACTIVE SET UPDATE message toto the RNC. station controller that is connected the UE. For details of this parameter,signalingthe 3GPP IUCS_ALCAP: indicates the refer to point of TS 25.214. the IU interface CS user signaling plane. IUCS_RANAP: indicates the signaling point of the IU interface CS control plane. STP: indicates the signaling transfer point. AAL2SWITCH: indicates the ATM switch.
ADD UCELLSETUP(Mandatory)
ADD UEXT3GCELL(Optional)
ADD UCELLSETUP(Mandatory)
SET UFRC(Optional)
ADD N7DPC(Mandatory)
STR IPLOPTST(Mandatory)
STR IPLOPTST(Mandatory) ADD N7DPC(Mandatory) ADD MTP3RT(Mandatory) ADD MTP3LKS(Mandatory) ADD M3DE(Mandatory)
SET UCORRMALGOSWITCH(Optional)
ADD UINTERFREQNCELL(Optional)
ADD U2GNCELL(Optional)
service is carried over the E-DCH, the switch PS_NON_BE_STATE_TRANS_SWITCH should be on simultaneously. 9) DRA_IU_QOS_RENEG_SWITCH: When the switch is on and the Iu QoS RENEQ license is activated, the RNC supports renegotiation of the maximum rate if the QoS of real-time services is not ensured according to the cell status. 10) DRA_PS_BE_STATE_TRANS_SWITCH: Destination port number RRC status When the switch is on, UE transition (CELL_FACH/CELL_PCH/URA_PCH) is allowed at the RNC. 11) DPU slot number DRA_PS_NON_BE_STATE_TRANS_SWITCH : When the switch is on, the status of the UE RRC that carrying real-time services can be changed to CELL_FACH at the RNC. The DSP index uniquely identifies a DSP. 12) DRA_R99_DL_FLOW_CONTROL_SWITCH: Under a poor radio environment, node type is This parameter is valid when the the QoS of high speed services drops set to IUR, IUCS, IUPS, or considerably and the TX power is overly NNI_AAL2SWITCH. high. In this case, the RNC can set restrictions on certain transmission formats based on the transmission quality, thus lowering traffic DSP index.TX power. Whenuniquely identifies speed and This parameter the switch is on, a peer DSP. the R99 downlink flow control function is enabled. 13) DRA_THROUGHPUT_DCCC_SWITCH: This parameter is used as the DRD Ec/No When the of whether to the DCCC based on threshold switch is on, as the DRD blind This parameter is used perform the Ec/No traffic statistics is supported over the DCH.the handover.of whether to measured value of threshold If the Ec/No perform the blind current cell is greater than this parameter of handover. the inter-frequency neighboring cell,Ec/No This parameter is used as the DRD this neighboring whether be perform the be the threshold of cell can to selected to blind candidate DRD cell. handover. When choosing a DRD candidate cell, if the Ec/No value of the current cell is greater than the threshold of inter-RAT/interfrequency neighboring cell, the DRD is permitted.
SET USTATETIMER(Optional)
SET USTATETIMER(Optional)
A timer to DRNC wait for the maximum number This parameter specifies rnsap radio link reconfiguration commit from SRNC. decides of inter-RAT RAB directed retries. It the size of the candidate set for inter-RAT DRD. The value 0 indicates that inter-RAT RAB parameter specifies theThis parameter This DRD is not applicable. maximum number can be cell-oriented. of inter-RAT RAB directed retries. It decides the size of the candidate set for inter-RAT DRD. The value 0 indicates that inter-RAT RAB DRD is not applicable. This parameter can be cell-oriented.
ADD UCELLDRD(Optional)
SET UDRD(Optional)
SET UQOSACT(Optional)
If the parameter is set to YES, QoS control for DL BE services based on RLC data in queue 0 If the duration for buffering the retransmission can be performed when the best cell is in the is more than or equals to the value of this DRNC. parameter, the subsequent packets added to queue 0 are discarded. For the flow control adopting the ATM, this parameter indicates the If the duration for buffering the data in queue 1 threshold for or equals to the value thethis is more than discarding packets in of CBR queue. parameter, the subsequent packets added to queue 1 are discarded. For the flow control adopting the ATM, this parameter indicates the If the duration for buffering the data in queue 2 threshold for or equals to the value thethis is more than discarding packets in of RTVBR queue. parameter, the subsequent packets added to queue 2 are discarded. For the flow control adopting the ATM, this parameter indicates the If the duration for buffering the data in queue 3 threshold for or equals to the value thethis is more than discarding packets in of NRTVBR queue. parameter, the subsequent packets added to queue 3 are discarded. For the flow control adopting the ATM, this parameter indicates the If the duration for buffering the data in queue 4 threshold for or equals to the value thethis is more than discarding packets in of UBR queue. parameter, the subsequent packets added to Direct retry switch. queue 4 are discarded. For the flow control 1) DR_RRC_DRD_SWITCH(DRD indicates the adopting the ATM, this parameter switch for RRC connection): When the switch is UBR+ threshold for discarding packets in theon, DRD and redirection is performed for RRC queue. connection if retry is required. If the duration for buffering the data in queue 5 2) DR_RAB_SING_DRD_SWITCH(DRD is more than or equals to the value of this on, switch for single RAB): When the switch is parameter, the subsequent packets added to DRDparameter specifies the service if retry is This is5performed for single UTRAN-specific queue are discarded. required. Discontinuous Reception (DRX) cycle length 3) DR_RAB_COMB_DRD_SWITCH(DRD coefficient. In connected mode, the UE uses switch for combine RAB):CN-specificswitch is the shorter one between When the DRX on, DRD is performed for combined services if cycle length coefficient and UTRAN-specific retry is required. coefficient. In idle mode, the DRX cycle length UE can use the DRX mode to receive paging This parameter specifies the size of patterns indications so as to reduce power that can be (that is, the number of subframes) consumption; in HS-SCCH.the UE needs to to received on the this case, For details, refer monitor only 25.214 protocol. the 3GPP TSone paging indication in one paging occasion during each DRX cycle. - If the value of this parameter is too small, the CN checks the paging channel frequently, thus UE domain specific Discontinuous Reception (DRX) cycle length coefficient broadcast on having great power consumption. SIB1 and used by UEs in Idle Mode. large, the - If the value of this parameter is too UE This parameter specifies whether the response of thethe transmission on the Eshould monitor UE to the paging becomes slow, andthe serving E-DCH cellrepeatedly AGCH in the core network may and the page the UE and thus E-RGCH in the serving transmission on each increase the downlink interference. link set if the data reception on E-DCH radio the HS-SCCH overlaps with the data reception on the E-AGCH and on the E-RGCH. The value of this parameter is a Boolean value. For details, refer to the 3GPP TS 25.214 protocol.
ADD PORTFLOWCTRLPARA(Optional)
ADD PORTFLOWCTRLPARA(Optional)
ADD PORTFLOWCTRLPARA(Optional)
ADD PORTFLOWCTRLPARA(Optional)
ADD PORTFLOWCTRLPARA(Optional)
ADD PORTFLOWCTRLPARA(Optional)
SET UCORRMALGOSWITCH(Optional)
SET UDTXDRXPARA(Optional)
ADD UCNDOMAIN(Optional)
SET UFRC(Optional)
SET UDTXDRXPARA(Optional)
SET UDTXDRXPARA(Optional)
This parameter specifies whether the parameters related to the DRX are valid. The parameters related to the DRX are optional and they can be set only when the parameters related to the DTX are configured. Value OFF indicates that the parameters are invalid and DRX cannot be configured. Value ON indicates that the parameters are valid.
ADD PPPLNK(Optional)
ADD MPLNK(Optional)
Number of the E1T1 port for bearing the PPP link The DSCP is a field of the IP data packet. It is Whether to enable differentiated service to the used to assign the the automatically triggered DSAC algorithm. communication networks. The DSCP code is used to label each data packet on the network and allocate the corresponding service levels. In the same network environment, the larger the DSCP is, the higher the priority is.
SET UDSACAUTOALGO(Optional)
PING IP(Optional)
Service code of the PING command, used to identify the PING command
SET DSCPMAP(Mandatory)
Differentiated service code is used to identify the service priority of the user.
ADD OBJALMSHLD(Mandatory)
STR IPLOPTST(Mandatory)
DSP number
SET TZ(Optional)
ADD IPRT(Mandatory)
Destination IP address
ADD IPRT(Mandatory)
Subnet mask
ADD TSCROSS(Mandatory)
ADD TSCROSS(Mandatory)
Target timeslot mask This parameter specifies the size of pattern 1 transmitted on the UL DPCCH . For details, refer to the 3GPP TS 25.214 protocol. This parameter specifies the size of pattern 2 transmitted on the UL DPCCH . For details, refer to the 3GPP TS 25.214 protocol. This parameter specifies the delay time for If the interval at which two consecutive DTX DRX being effective after it is enabled.is patterns are transmitted on the UL DPCCH For details, a certain number of timeslots DtxCycle2, see 3GPP TS 25.331. should be transmitted before data is transmitted on the DPCCH. This parameter specifies the number of timeslots. For details, refer parameter specifies whether the This to the 3GPP TS 25.214 protocol. parameters related to the DTX are valid. Value OFF indicates that the parameters are invalid and DTX_DRX cannot be configured. Value ON indicates that the parameters are valid. When the cell is automatically shut down, this parameter is used to repeatedly determine whether the cell needs to be automatically enabled. When the cell is automatically enabled, the cell can be automatically disabled again only after a period delay. is on, the Cell dynamic When the switch shutdown algorithm of the local RNC cell is enabled. When the switch is off, the Cell dynamic shutdown algorithm of the local RNC cell is disabled.
SET UDTXDRXPARA(Optional)
SET UDTXDRXPARA(Optional)
SET UFRC(Optional)
SET UDTXDRXPARA(Optional)
SET UDTXDRXPARA(Optional)
SET URNCCELLSHUTDOWNPARA(Optional)
SET URNCCELLSHUTDOWNPARA(Optional)
SET URNCCELLSHUTDOWNPARA(Optional)
ADD UCELLDYNSHUTDOWN(Mandatory)
When the switch is on, the is When DynShutDownType "Cell dynamic shutdown" feature is cell will be shut down in ForceShutDown,the valid. the shutdown time interval. When DynShutDownType is ConditionalShutDown, the cell will be shut down with some conditions in the shutdown time interval.
ADD UCELLDYNSHUTDOWN(Optional)
ADD FRALNK(Mandatory)
Number of the bearing port Period of E-DCH throughput ratio measurement. This parameter specifies the E1/T1 port number period of E-DCH throughput ratio measurement. The throughput ratio over the EDCH is periodically measured to implement Number of pending periods after the state transition from E-DCH totransition from Ethroughput event 4B for state FACH and DCCC algorithm triggered. This parameter is DCH to FACH is on EDCH. used to prevent too many throughput events 4B being reported. Pending time after the Number of event 4B is triggered = value ratio throughput periods before the throughputof this event 4B for state transition from E-DCH parameter x 10 is used to check whether to This parameter ms.When the throughput ratio the FACH is triggered. UE in the low activity state. Ifand remains so the UE is on the is below the lower threshold E-DCHperiod specified by this parameter, the for the channel, the low activity counter increasesis reported. time throughput prevents event 4B by 1 every This parameter ratio event 4B is reported. unnecessary throughput ratio events that are caused by throughput ratio instability from being triggered. Time to trigger the throughput ratio event 4B = value of this parameter x 10 ms. The parameter specifies the number of codes (SF=256) used by the E-DCH Absolute Grant Channeladdress to be checked. about this Peer IP (E-AGCH). For details The input parameter, refer to 3GPP TS 25.433. address (CHKIPADDR) must be the address (regardless of the network segment address or host address of the peer address) in the network segment specified by the (PEERIPADDR, PEERMASK). This parameter is used to count the adjusted step of Ec/N0 in the link quality adjust algorithm for E-FACH. the adjustment cycle This parameter specifies of Ec/N0. This parameter is also used to determine the measurement period of the RLC retransmissions in the link quality adjust algorithm for E-FACH. the time duration This parameter specifies when the reported Ec/N0 is valid. The reported Ec/N0 is valid for the period (starting from the time when the Ec/N0 report is received) specified by thisspecifies the time duration This parameter parameter. when the reported Ec/N0 is valid. The reported Ec/N0 is valid for the period (starting from the time when the Ec/N0 report is received) specified by this parameter.
SET COPTLNK(Optional)
SET UUESTATETRANS(Optional)
SET UUESTATETRANS(Optional)
SET UUESTATETRANS(Optional)
SET UUESTATETRANS(Optional)
ADD UCELLHSUPA(Optional)
ADD IPPATH(Mandatory)
SET URACHMEASUREPARA(Optional)
SET URACHMEASUREPARA(Optional)
SET UFRC(Optional)
ADD UCELLFRC(Optional)
SET URACHMEASUREPARA(Optional)
This parameter specifies the maximum value that Ec/N0 can be stepped down in the link quality adjust algorithm for E-FACH. This parameter specifies the maximum for This parameter specifies the threshold value that Ec/N0 can be stepped up of the cell determining the signal quality in the link quality adjustthe Ec/N0 reported by UE. If the according to algorithm for E-FACH. reported Ec/N0 exceeds the value of this parameter, it indicates that the signal quality of This parameter specifies the threshold for the cell is good and a high rate can be set for determining the signal quality of the cell initial access. Ec/N0 reported by UE. If the according to the reported Ec/N0 exceeds the value of this parameter, it indicates that the signal quality of the cell is good and a high rate can be set for initial access.
SET URACHMEASUREPARA(Optional)
SET UFRC(Optional)
ADD UCELLFRC(Optional)
ADD SUBTSK(Optional)
EXP ALMLOG(Optional)
End date of the alarm record. By default, the end date is 2037-12-31.
STA ALMLOG(Optional)
End date of the alarm record. By default, the end date is 2037-12-31.
SET TZ(Mandatory)
End date of the daylight saving time This parameter specifies the first MAC-d PDU size used by HSUPA services. The size must be a multiple of 8 bits. This parameter specifies the tenth MAC-d PDU size used by HSUPA services. The size must be a multiple of 8 bits. This parameter specifies the eleventh MAC-d PDU size used by HSUPA services. The size must be a multiple of 8 bits.
ADD UTYPRABHSPA(Optional)
ADD UTYPRABHSPA(Optional)
ADD UTYPRABHSPA(Optional)
ADD UTYPRABHSPA(Optional)
This parameter specifies the twelfth MAC-d PDU size used by HSUPA services. The size must be a multiple of 8 bits. This parameter specifies the second MAC-d PDU size used by HSUPA services. The size must be a multiple of 8 bits. This parameter specifies the third MAC-d PDU size used by HSUPA services. The size must be a multiple of 8 bits. This parameter specifies the fourth MAC-d PDU size used by HSUPA services. The size must be a multiple of 8 bits. This parameter specifies the fifth MAC-d PDU size used by HSUPA services. The size must be a multiple of 8 bits. This parameter specifies the sixth MAC-d PDU size used by HSUPA services. The size must be a multiple of 8 bits. This parameter specifies the seventh MAC-d PDU size used by HSUPA services. The size must be a multiple of 8 bits. This parameter specifies the eighth MAC-d PDU size used by HSUPA services. The size must be a multiple of 8 bits. This parameter specifies the ninth MAC-d PDU This used by HSUPA services. The size must size parameter specifies the number of E-DCH This parameter specifies the number ofevent measurementof 8 bits. during periods be a multiple sizes. Currently, which no MAC-d PDU E-DCH throughput is PS only reported 4A related to conversational services can be configured with again after such an event 4A is reported. This multiple E-DCH MAC-d PDU many channel sizes. Other parameter is setspecifies the number of This parameter to avoid too services can have only one The larger the E-DCH MAC-d reconfiguration operations. which no event measurement periods during PDU size. parameter, the longer the time value of this E-DCH throughput is reported 4B related to from the last reporting of throughput-related again after such an event 4B is reported. This event 4A on E-DCH to the next reporting, and parameter is set to avoid too many channel the smaller the possibility ofThe larger the reconfiguration operations. triggering throughput-related eventthe longer the time value of this parameter, 4A on E-DCH. from the last reporting of throughput-related event 4B on E-DCH to the next reporting, and the smaller the possibility of triggering throughput-related event 4B on E-DCH.
ADD UTYPRABHSPA(Optional)
ADD UTYPRABHSPA(Optional)
ADD UTYPRABHSPA(Optional)
ADD UTYPRABHSPA(Optional)
ADD UTYPRABHSPA(Optional)
ADD UTYPRABHSPA(Optional)
ADD UTYPRABHSPA(Optional)
ADD UTYPRABHSPA(Optional)
ADD UTYPRABHSPA(Optional)
ADD UTYPRABDCCCMC(Optional)
ADD UTYPRABDCCCMC(Optional)
SET UEDCHRATEADJUSTSET(Optional)
HSUPA UL rate adjustment set for E-DCH channel. It contains rates for rate adjustment for E-DCH channel and is used in the HSUPA DCCC algorithm. This parameter specifies the maximum allowed SIR decrease step for HSUPA within an This parameter specifies the target number of adjustment period of outer-loop power control. E-DCH PDU retransfer when large probability retransmission is applied for this service. The This probability retransmission is used largeparameter specifies the number of to measurement periods from the moment when improve the cellspecifies the target cell load of capacity when This parameter exceeds the 4Athe number is the E-DCH rate threshold to high or congested. E-DCH PDUwhen the throughput-related event the moment retransfer when small probability retransmissionis triggered. This parameter is for 4A on E-DCH is applied the this service. The This parameter specifies number of small to avoid unnecessary reportsused to by probability retransmission is triggered used measurement periods from a single UE when improveuplink throughput fluctuation. The the throughput for the moment when E-DCH E-DCH rate falls below the 4B the cell load is normal. parameter, threshold to larger the value of the throughput-related event the longer the moment when this the on E-DCH is triggered. This parameter is required duration of the E-DCH uplink 4B throughput exceeding the reports triggered by set to avoid unnecessary 4A threshold, and the smaller the possibility fluctuation. The E-DCH uplink throughput of triggering throughput-related this parameter, the longer larger the value of event 4A on E-DCH. the required duration of the E-DCH uplink throughput keeping below the 4B threshold, and the smaller the possibility of triggering throughput-related event 4B on E-DCH.
ADD UTYPRABOLPC(Mandatory)
ADD UTYPRABOLPC(Mandatory)
ADD UTYPRABOLPC(Mandatory)
ADD UTYPRABDCCCMC(Optional)
ADD UTYPRABDCCCMC(Optional)
SET UDTXDRXPARA(Mandatory)
This parameter specifies the E-DCH TTI type. This parameter specifies whether the RRC connection is established preferentially on the E-FACH. If this parameter is set to ON and WCDMA UE and the serving cell support Eboth the EFACH channel downlink factor FACH, then the RRC connection is established preferentially onspecifies the maximum of the This parameter the E-FACH, regardless setting of SigChType.the DTCH mapped onto guaranteed power of According to the related protocols, the the EFACH. UE cannot transmit signals over the FACH if both the UE and the cell support This parameter specifies whether the E-FACH. Thus, if this parameter is set the to OFF compressed E_FACH the mode can be enabled forindicator indicator. When the and both supportand the serving cell support UE When the parameter is set to HSPA+ service. is TRUE, it indicates that the cell supports be E-FACH, then the RRC connectionbe enabled TRUE, the compressed mode can can only E_FACH. on the non-FACH, even if the established for the HSPA+ service. When the parameter is SigChType is set to FACH. Otherwise, must set to FALSE, the uplink and downlink the RRC connection isbefore the compressed return to the DCH established on the corresponding channel according toservice. mode is enabled on for the HSPA+ the setting of SigChType set for compatibility with the This switch is HSPA+ terminals that might exist in the network because these terminals do not support the enabled compressed mode for the HSPA+ service.
ADD TRMFACTOR(Optional)
ADD UCELLEFACH(Optional)
ADD UEXT3GCELL(Mandatory)
SET URRCESTCAUSE(Optional)
SET UCMCF(Optional)
SET TZ(Mandatory)
SET UQUEUEPREEMPT(Optional)
ADD MTP3LKS(Optional)
Type of the end date. "WEEK" indicates that the end date is a weekday. "DATE" indicates that the end date is a month day. "DATEWEEK" indicates the end date is Whether toby a combination of weekday and verify the centralized signaling link expressedswitch is enabled, users of When case of the link establishment. ON: in the the month day. call can preempt all the users of emergency verification, that is, the verification emergency non emergencyOFF: When the switch is is not required. call. non emergency disabled, users of emergency call can only verification, that is, the verification is required preempt users of non emergency call with thea during the establishment of a signaling link in preempted attributes. link set. Through verification, the stable operation state of a signaling link can be ensured. You are advised to use the normal verification. That is, the emergency verification This parameter specifies whether the RNC switch is set to OFF. LCS requests of specially handles the emergency calls. In other words, the RNC provides highly accurate location for emergency calls regardless of license constraints.
SET USMLC(Optional)
ADD MPGRP(Optional)
SET TZ(Mandatory)
Month on which DST ends Encryption mode used when the NE serves as the FTP client AUTO: indicating that the FTP client IP address of selects the encryptionsystem automatically the NE management mode PLAINTEXT: indicating that the plain text Encryption mode supported when the NE mode is used FTP server serves as the forcibly. ENCRYPTED: indicating that the encrypted AUTO: indicating that the FTP client mode is used selects the encryption mode automatically forcibly. PLAINTEXT: indicating that the plain text mode is used forcibly. ENCRYPTED: indicating that the encrypted mode is used forcibly. The encryption algorithm supported by RNC. Both UEA0 and UEA1 can be selected at one time.
ADD EMSIP(Mandatory)
SET FTPSSRV(Optional)
SET FTPSCLT(Optional)
SET UUEA(Optional)
ADD UCELLDYNSHUTDOWN(Mandatory)
End time of the first interval when the "Cell dynamic shutdown" feature is valid.
ADD UCELLDYNSHUTDOWN(Mandatory)
End time of the second interval when the "Cell dynamic shutdown" feature is valid.
ADD UCELLDYNSHUTDOWN(Mandatory)
End time of the third interval when the "Cell dynamic shutdown" feature is valid. Status of the scheduled task. This parameter determines whether to start the scheduled task. Type of the destination entity. For details, see Type of the M3UA local entity. For details RFC4666. about the ASP and IPSP, see RFC4666. is a M3UA_ASP: suggested to use when there M3UA_ASP: suggested(STP) between the is a to use when there signaling the scheduled subtask to be Status of transfer point (STP) betweenadded signaling transfer point local entity and the destination entity the local entity and the destination entity there is M3UA_IPSP: suggested to use when M3UA_IPSP: suggested the number of codes The parameter specifies to use when there is no signaling transfer point (STP) between the no signaling transfer point (STP) between the (SF=128) used the destination entity local entity and by the E-DCH Relative Grant local entity and the destination entity Channel (E-RGCH)/E-DCH Hybrid ARQ M3UA_SS7SP: suggested to use when the Indicator Channelis a narrowbandE-RGCH is destination entity (E-HICH). The signaling used to adjust the uplink power available for point the UE. The E-HICH is used to of the M3UA_SP: represents all typesprovide feedback on the destination entityACK/NACK information, which indicates whether the data that the RNC Return code of the command. If thisor not. The receives from the E-DCH is correct parameter is specified, only the corresponding record is E-RGCH and E-HICH are dedicated channels displayed. multiple UEs. They not specified, the shared by If this parameter is share the OVSF return code is withconsidered. use the channel code not SF=128 and orthogonal signature sequence to differentiate subscribers. For details about this parameter, refer to 3GPP TS 25.433.
SET SCHTSKSW(Mandatory)
ADD SUBTSK(Optional)
ADD M3LE(Mandatory)
ADD M3DE(Mandatory)
EXP LOG(Optional)
ADD UCELLHSUPA(Optional) SET ETHPORT(Optional) ADD PPPLNK(Optional) ADD MPGRP(Optional) SET ETHPORT(Optional) ADD PPPLNK(Optional) ADD MPGRP(Optional)
EXP ALMLOG(Optional)
End synchronization number of the alarm record AAL2 connection establishment indication timer. This timer is started when an AAL2 signaling entity sends the service user an indication for establishing an AAL2 connection.
SET AAL2TMR(Optional)
SET AAL2TMR(Optional)
AAL2 connection establishment request timer. This timer is started when an AAL2 signaling entity sends the peer node a request for establishing an AAL2 connection.
SET TZ(Mandatory)
End time of DST The operation time of the log record is prior to this time. If this parameter is not specified, the end time is not limited. Time when the scheduled subtask is stopped. Execution mode of the commands If the time mode is set to "DAILY_T", 1. ONE_BY_ONE: indicating that the "WEEKLY_T", or "MONTHLY_T", you should commands are executed one by one according set this parameter. to the execution sequence. Only one command can be executed once. 2. PARALLEL: indicating that multiple commands are executed in parallel. Multiple commands can be executed once. The operation time of the log record is prior to this time. If this parameter is not specified, the end time is not limited.
EXP LOG(Optional)
ADD SUBTSK(Mandatory)
RUN BATCHFILE(Optional)
COL LOG(Optional)
EXP ALMLOG(Optional)
End time of the alarm record. By default, the end time is 23:59:59.
STA ALMLOG(Optional)
End time of the alarm record. By default, the end time is 23:59:59.
ADD OP(Mandatory)
EXP LOG(Optional)
Type of the log to be queried. The result is displayed by the specified type.
ADD OP(Mandatory)
End time of the specifies the threshold to This parameter user operation. The input format of this 4A related to DCH traffic volume, trigger event parameter is HH&MM&SS. that is, the upper limit of the traffic volume. The larger the value of this parameter, the smaller the possibility of triggering traffic-related event 4A on DCH.
ADD UTYPRABDCCCMC(Optional)
ADD UTYPRABDCCCMC(Mandatory)
This parameter specifies the threshold to trigger event 4B related to DCH traffic volume, that is, the lower limit of the traffic volume. The smaller the value of this parameter,A reporting This parameter specifies the event the smaller the possibility ofto the delay from the moment period. It refers triggering traffic-related event 4B on event A is triggered to the moment when when DCH. the event is reported. Note: this parameter is This parameter specifies the threshold of event only used the upper limitalgorithm based on A, that is, in rate adjust of RLC TCP, and is notratio. When the monitored RLC retransmission used in RLC flow control algorithm. retransmission ratio exceeds this threshold and triggers the event A, it indicates that the quality of the radio link is the threshold of event This parameter specifies poor, and flow control measures the lower limit of to reduce the RLC B, that is, should be done RLC retransmission throughput. the monitored RLC retransmission ratio. When ratio goes lower than this threshold and triggers the event B, it indicates that the quality of the radio link is good, and RLC throughput could be increased.
ADD UTYPRABRLC(Optional)
ADD UTYPRABRLC(Optional)
ADD UTYPRABRLC(Optional)
SET TZ(Mandatory)
SET TZ(Mandatory)
ADD EMU(Optional)
Sequence of the end week of DST Upper limit of extended output analog signal 1. If "Sensor Type of External Analog 1" is set to VOLTAGE, the unit of this parameter is V; if "Sensor Type of External Analog 1" is set to CURRENT,of extendedthis parameter is A. 1. Lower limit the unit of output analog signal If "Sensor Type of External Analog 1" is set to VOLTAGE, the unit of this parameter is V; if "Sensor Type of External Analog 1" is set to CURRENT, the unit of this parameter is A.
ADD EMU(Optional)
ADD EMU(Optional)
ADD EMU(Optional)
Maximum measurement range of extended Sensor signal 1. If "Sensor Type signal 1 analog type of extended analog of External Analog 1" is set to VOLTAGE, the unit of this parameter is V; if "Sensor Type of External Analog 1"measurement range of extended Minimum is set to CURRENT, the unit of this parameter is A. If "Sensor Type of External analog signal 1. Analog 1" is set to VOLTAGE, the unit of this parameter is V; if "Sensor Type of External Analog 1" is set to CURRENT, the unit of this parameter is A. Upper limit of extended output analog signal 2. If "Sensor Type of External Analog 2" is set to VOLTAGE, the unit of this parameter is V; if "Sensor Type of External Analog 2" is set to CURRENT, the unit of this parameter is A.
ADD EMU(Optional)
ADD EMU(Optional)
ADD EMU(Optional)
Lower limit of extended output analog signal 2. If "Sensor Type of External Analog 2" is set to VOLTAGE, the unit of this parameter is V; if "Sensor Type of External Analog 2" is set to CURRENT, the unit of this parameter is A.
ADD EMU(Optional)
ADD EMU(Optional)
Maximum measurement range of extended Sensor signal 2. If "Sensor Type signal 2 analog type of extended analog of External Analog 2" is set to VOLTAGE, the unit of this parameter is V; if "Sensor Type of External Analog 2"measurement range of extended Minimum is set to CURRENT, the unit of this parameter is A. If "Sensor Type of External analog signal 2. Analog 2" is set to VOLTAGE, the unit of this parameter is V; if "Sensor Type of External Analog 2" is set to CURRENT, the unit of this parameter is A. Upper limit of extended output analog signal 3. If "Sensor Type of External Analog 3" is set to VOLTAGE, the unit of this parameter is V; if "Sensor Type of External Analog 3" is set to CURRENT,of extendedthis parameter is A. 3. Lower limit the unit of output analog signal If "Sensor Type of External Analog 3" is set to VOLTAGE, the unit of this parameter is V; if "Sensor Type of External Analog 3" is set to CURRENT, the unit of this parameter is A.
ADD EMU(Optional)
ADD EMU(Optional)
ADD EMU(Optional)
ADD EMU(Optional)
ADD EMU(Optional)
Maximum measurement range of extended Sensor signal 3. If "Sensor Type signal 3 analog type of extended analog of External Analog 3" is set to VOLTAGE, the unit of this parameter is V; if "Sensor Type of External Analog 3"measurement range of extended Minimum is set to CURRENT, the unit of this parameter is A. If "Sensor Type of External analog signal 3. Analog 3" is set to VOLTAGE, the unit of this parameter is V; if "Sensor Type of External Analog 3" is set to CURRENT, the unit of this parameter is A. Upper limit of extended output analog signal 4. If "Sensor Type of External Analog 4" is set to VOLTAGE, the unit of this parameter is V; if "Sensor Type of External Analog 4" is set to CURRENT,of extendedthis parameter is A. 4. Lower limit the unit of output analog signal If "Sensor Type of External Analog 4" is set to VOLTAGE, the unit of this parameter is V; if "Sensor Type of External Analog 4" is set to CURRENT, the unit of this parameter is A.
ADD EMU(Optional)
ADD EMU(Optional)
ADD EMU(Optional)
ADD EMU(Optional)
ADD EMU(Optional)
Maximum measurement range of extended analog signal 4. If "Sensor Type of External Analog 4" is set to VOLTAGE, the unit of this parameter is V; if "Sensor Type of External Analog 4"measurement range of extended Minimum is set to CURRENT, the unit of this parameter is A. If "Sensor Type of External analog signal 4. Analog 4" is set to VOLTAGE, the unit of this parameter is V; if "Sensor Type of External Analog 4" is set to CURRENT, the unit of this parameter is A. Pending time after the traffic volume event 4B for state transition from FACH to PCH is When the traffic volume is below the 4B reported. This remains so is used period threshold and parameter for the to prevent too many traffic volume events 4B being reported. specified by this parameter, the event 4B is reported. This parameter prevents unnecessary traffic volume events that are caused by traffic volume instability from being triggered.
ADD EMU(Optional)
SET UUESTATETRANS(Optional)
SET UUESTATETRANS(Optional)
ADD UCTCH(Mandatory)
ADD UCELLMCCH(Mandatory)
ID of the transport channel carrying the MCCH. This parameter specifies the maximum power Indicating whether the FACH measurement of the FACH. For details of this parameter, occasion period length coefficient should be refer to the 3GPP the 25.211. information. If the delivered through TS system inter-freq or inter-RAT measurement control information is broadcast through the system information, some UEs in CELL_FACH state This parameter specifies the maximum power need FACH. of thethe FACH measurement occasion period length coefficient for measurement. When [Inter-freq/Inter-RAT Meas Ctrl Info Ind] is set to NOT_REQUIRE, this parameter is not required. This parameter need not be This parameter describesno inter-RAT or intraconfigured when there is Fach Max Power. frequency cells. To have the UE perform interfrequency or inter-RAT cell reselection, the FACH measurement indicator needs to be configured. This parameter specifies the factor associated with the scheduling priority indicator. This factor is used in two algorithms. In scheduling This parameter defines the reduce value in algorithm, it is used to adjust the handling reducing FACH power Action. IUB congestion priority for different services. In algorithm, it is used to allocate bandwidth for different services. If the factor is higher, it is more possible for the user to increase the handling priority or get more Iub bandwidth.
ADD UCELLMBMSFACH(Optional)
SET UMBMSFACH(Optional)
SET UMSCHFACH(Optional)
ADD UCELLMEAS(Optional)
ADD UCELLOLC(Optional)
SET USPIFACTOR(Mandatory)
SET CTRLFACTOR(Mandatory)
Activation factor. The bandwidth of this link is the bandwidth of the CCP, NCP, ALCAP, and This parameter specifies the threshold of IPoA PVC multiplied by the activation factor. allowed times of rate increase consecutive failure within a certain monitoring period. If the times of failure is beyond this threshold, subsequent rate increase is not allowed even if the 4A measurement report is received.
SET UDCCC(Optional)
SET FANSPEED(Optional)
SET FANSPEED(Optional)
SET FANSPEED(Optional)
SET FANSPEED(Optional)
SET FANSPEED(Mandatory)
SET FANSPEED(Mandatory)
LOD FAN(Mandatory)
Type of the fan box Whether to send and process the flow control frame on the physical layer. The setting of this parameter must be negotiated with that on the interconnected side.
SET ETHPORT(Optional)
ADD FRALNK(Optional)
Flow control parameter index Flow control parameter index. This parameter must be a flow control parameter that is already set through the "ADD PORTFLOWCTRLPARA" command.
ADD IMAGRP(Optional)
ADD UNILNK(Optional)
SET OPT(Mandatory)
SET ETHPORT(Mandatory)
ADD PPPLNK(Optional)
ADD MPGRP(Optional)
ADD ATMLOGICPORT(Optional)
ADD IPLOGICPORT(Optional)
ADD PORTFLOWCTRLPARA(Mandatory)
ADD ETHTRK(Optional)
ADD PPPLNK(Optional)
ADD MPLNK(Optional)
SET FCSW(Mandatory)
Flow control switch. Other switches are valid only when "Flow control switch" is "ON".
SET UFRC(Optional)
This parameter specifies the step size of the closed-loop power control performed on DL DPCH in Frequency Division Duplex (FDD) mode. For details of this parameter, refer to the 3GPP TS 25.214.
ADD UEXT3GCELL(Optional)
The indicator shows the preferred transmission diversity mode of FDPCH for MIMO to choose.
ADD UCELLSETUP(Mandatory)
FDPCH diversity mode for MIMO user. The indicator shows the preferred transmission diversity mode of FDPCH for non-MIMO to choose.
ADD UEXT3GCELL(Optional)
ADD UCELLSETUP(Mandatory)
SET UFDPCHRLPWR(Optional)
This parameter specifies the maximum FDPCH diversity for the for non MIMO user. reference power mode F-DPCH. This parameter indicates the maximum value of reference F-DPCH TX power, that is, the value of the Maximumspecifies the minimum This parameter DL Power IE. For details of this parameter, referthe the 3GPP This reference power for to F-DPCH. TS 25.433. parameter indicates the minimum value of reference F-DPCH TX power, that is, the value of the Minimum DL Power IE. For details of this parameter, refer to the 3GPP TS 25.433. This parameter specifies the offset between TPC command power in F-DPCH channel and reference F-DPCH TX power (expressed by the Initial DL Transmission Power IE). Number of CPU usage sampling times for fast judgment. Thecannotof this parameter and be The file name value contain the path must of half The suffix is automaticallysmaller. The suffix. size of "Filter window" or added. file name is composed of English letters, numerals, and common symbols, and the characters (@, #, !, %, ^, &, *, [, ], /, \, ', and ") cannot appear in the file name.
SET UFDPCHRLPWR(Optional)
SET UFDPCHPARA(Optional)
SET FCCPUTHD(Optional)
EXP LOG(Optional)
ZIP FILE(Mandatory)
BKP LOGDB(Optional)
Path of the target filefile. The file name is Name of the backup composed of English letters, numerals, and common symbols, and the characters (@, #, !, %, ^, &, *, [, ], /, \, ', and ") cannot appear in the file name.
EXP CFGMML(Optional)
EXP ALMLOG(Optional)
SET UINTRAFREQHO(Optional)
fast validrefer on the OMU server. If the OMU be afadingpathto the eliminated. So the L3 analysis, is almost intra-frequency filtering shouldlayer 3smoothinput path and runs the LINUXapply filter coefficients must measurement system, the filtering to shadow fading and small amount example, start with the symbol "/" or "\", layer 3 filter inter-frequency measurement for of remaining fast fading, thus the filtered WINDOWS "/mml". If the OMU runs the measurement coefficients. value can reflect path can of thefull path (for system, the inputthe varying of the actual The recommended values be a inter-RAT measurement value, andrelative path (for example, "D:\mml") orfilter coefficients in measurement layer 3 a provide more reliable measurement are asthe event judgement. example,cells value for relative path is used, different "/mml"). If follows: As cells directory onsame as that of speed of the for the impact isaverage moving the OMU -In root where the network performance: the larger the value a comparatively big installation directory. That is, if the OMU UEs is low, there is of this parameter, the stronger the smoothingerror, so the higher softwarefading square disk D, and exported file shadow is installed in effect the the the anti-fast-fading capability, but is saved in "D:/mml". of inter-RAT the lower the recommended value signal tracing capability, the greater the 4. measurement layer 3 filter coefficients is possibility of call drops. If the value of this The value can be increased in a certain parameter is too small, unnecessary soft degree; handover or the ping-pong handover may of -In cells where the average be exported Type of the alarm log file to moving speed occur. medium, there is a comparatively big UEs is Note that this parameter has so theimpact on shadow fading square error, great the overall performanceinter-RAT recommended value of of the handover, so you should be layer 3 filter coefficients is 3; measurement cautious when adjusting this parameter. -In cells where the average moving speed of UEs is high, there is a comparatively small shadow fading square error, so the recommended value of inter-RAT Execution result. measurement layer 3 filter coefficients is 2. If you select "FALSE", only the records of failed operations are displayed. If you select "TRUE", only the records of successful operations are displayed. If this parameter is not specified, all the records are displayed. This parameter specifies the fixed MAC-hs window size. It is valid when the [Is MAC-hs windowof thefixed or not] parameter is set to Switch size FLC algorithm. The FLC is a TRUE. mandatory algorithm used in the multifrequency network to guarantee that UEs camping on other frequencies can reselect the current frequency to receive the MBMS service. Therefore, the switch is on by default.
EXP LOG(Optional)
ADD UNODEBLMTPARA(Optional)
ADD UCELLMCCH(Optional)
ADD FRALNK(Optional)
ADD IMAGRP(Optional)
ADD UNILNK(Optional)
SET OPT(Optional)
SET ETHPORT(Optional)
ADD PPPLNK(Optional)
ADD MPGRP(Optional)
ADD ATMLOGICPORT(Optional)
ADD IPLOGICPORT(Optional)
ADD ETHTRK(Optional)
EXP ELABEL(Optional)
EXP DEVFILE(Optional)
Name of the file Name of the file. The following special characters are not allowed in the file name: \, /, :, *, ?, ", <, >, and |. When the CELLID+RTT method is selected, Name of the specified file. By default, the file is this parameter specifies whether forced soft in the OMU active-areaif the number of RTT handover is performed path \ftp\license folder. measured result is smaller than 3. After soft handover is complete, accuracy of the CELLID+RTT method isfor multiplexing. This Maximum time of delay enhanced when the RNC obtains used for thelinks. parameter is more radio system to send the multiplexed data. If the time for buffering the data exceeds this value, the system does not wait for the multiplexing of other packets. In this way, the overlong delay can be prevented.
CHK DATA2LIC(Optional)
SET USMLC(Optional)
ADD IPMUX(Optional)
ADD MPGRP(Optional)
ADD FRALNK(Mandatory)
EXP LOG(Mandatory)
ADD SUBTSK(Mandatory)
command is executed. You can also set up to five time points for executing the command in the day. The default execution interval is one week. 5. WEEKLY_C: When this parameter is set to "WEEKLY_C", the command is executed every week. You can set the day in which the command is executed. You can also set the start time and end time in the day in which the command is size,the length of the time MP segment executed, and set packet should interval for executing the command in the day. be bigger or equel with it. The default execution interval is one week and the default time interval is 30 minutes. 6. MONTHLY_T: When this parameter is set to "MONTHLY_T", the command is executed Link number of fractional ATM/IMAin which the every month. You can set the day command is executed. You can also set up to five time points for executing the command in the day. The default execution interval is one month. Fractional link type 7. MONTHLY_C: When this parameter is set Time mode used when command exported. to "MONTHLY_C", the the log is is executed "ONTIME" indicates the time between two the every month. You can set the day in which exact time.is executed. You indicates the the command "RELATIVE_T" can also set time before theand end time. in the day in which the start time current time command is executed, and set the time interval for executing the command in the day. The default execution interval is one month and the default time interval is 30 minutes. Frame length. A longer frame improves the transmission efficiency, but at the same time reduces the sensitivity to errors.
ADD IMAGRP(Optional)
EXP LOG(Optional)
ADD ADJMAP(Mandatory)
ADD TRMFACTOR(Mandatory)
SET LICENSE(Optional)
function switch 1.
SET LICENSE(Optional)
function switch 2.
SET LICENSE(Optional)
function switch 3.
SET LICENSE(Optional)
function switch 4.
SET LICENSE(Optional)
function switch 5. If the available forward bandwidth is less than or equal to this value, the forward congestion alarm is emitted and forward congestion control is striggered. If the available forward bandwidth is greater than this value, the forward congestion alarm is cleared and forward congestion control is stopped. If the ratio of available forward bandwidth is greater than this value, the forward congestion alarm is cleared and forward congestion control is stopped. If the ratio of available forward bandwidth is less than or equal to this value, the forward congestion alarm is emitted and forward congestion control is triggered. If the available forward bandwidth is greater than this value, the forward overload congestion alarm is cleared and forward overload control is stopped. If the ratio of available forward bandwidth is greater than this value, the forward overload congestion alarm is cleared and forward overload control is stopped. If the available forward bandwidth is less than or equal to this value, the forward overload congestion alarm is emitted and forward overload control is triggered. If the ratio of available forward bandwidth is less than or equal to this value, the forward overload congestion alarm is emitted and forward overload control is triggered.
ADD TRMLOADTH(Optional)
ADD TRMLOADTH(Optional)
ADD TRMLOADTH(Optional)
ADD TRMLOADTH(Optional)
ADD TRMLOADTH(Optional)
ADD TRMLOADTH(Optional)
ADD TRMLOADTH(Optional)
ADD TRMLOADTH(Optional)
ADD TRMLOADTH(Optional)
ADD TRMLOADTH(Optional)
ADD UPRACHTFC(Mandatory)
The power occupancy factor of the control part. For detailed information of this parameter, refer to 3GPP TS 25.214. The power occupancy factor of the data part. For detailed information of this parameter, refer to 3GPP TS 25.214.
ADD UPRACHTFC(Optional)
ADD GPS(Optional)
Format of the geographic coordinates. The values include "DEG" and "SEC". Support localization maintenance, Degree mode and Degree Minute and Second mode can be selected.
ADD USMLCCELL(Optional)
ADD TRMFACTOR(Optional)
ADD TRMFACTOR(Optional)
WCDMA general common channel service uplink factor Global routing management switch. If this switch is turned on, the IP addresses in the controlled range cannot be in the same network segment.
SET GLOBALROUTESW(Mandatory)
ADD UCELLLDR(Optional)
Indicates rate of gold users involve in the Maximumwhetherthe narrowband AMR speech switch for gold users. serviceof congestion control. According to the policy set for gold users by operators, if service quality of gold users should be guaranteed even in resource congestion, the switch should Maximum rate thethe wideband AMR LDR such be disabled. If of switch is enabled, speech service reduction and handover also occurs on as rate for gold users. gold users even in cell resource congestion, which impacts user service quality. If the switch is disabled, no action is performed on gold users.
ADD GPS(Optional)
ADD RSCGRP(Mandatory)
ADD UEXT2GCELL(Mandatory)
ADD ICMPGUARD(Mandatory)
Packet type against the ICMP attack CPU usage threshold for handover control. When the average CPU usage of sliding windows reaches or exceeds the threshold, handover flow usage threshold for handover Packet queue control is triggered. control. When the average packet queue usage of sliding windows reaches or exceeds the threshold, handover flow control is triggered. CPU usage threshold for recovery from handover control. When the average CPU usage of sliding windows is lower than the threshold, handover flow control is recovery Packet queue usage threshold for stopped. from handover control. When the average packet queue usage of sliding windows is lower than the threshold, handover flow control is stopped.
SET FCCPUTHD(Optional)
SET FCMSGQTHD(Optional)
SET FCCPUTHD(Optional)
SET FCMSGQTHD(Optional)
SET FCSW(Optional)
ADD UTYPRABQUALITYMEAS(Mandatory)
SET UUSERHAPPYBR(Optional)
This parameter specifies the Happy bit rate of the best-effort (BE)handover flow service Whether to controltriggered,with different user When event 5A is pending timer is priorities. This Happy bit rateais sent to NodeB started, during which interface. will notthe event 5A When be by RNC through IUB reported before thelimited and the HS-DSCH NodeB resource is specified number is reached. This user exceeds the Happy bit rate, bit rate of the parameter can control the frequency for reporting event 5A. will be the HS-DSCH scheduling priority decreased. When this parameter is set to zero, it indicates that NodeB will not adjust the HSDSCH scheduling priority according to the Happy bit rate. indicates whether the cell of This parameter the neighboring RNC supports the HARQ Preamble capability. Mode1 means the cell supports the HARQ Preamble capability, whereas Mode0 means not supporting it.
ADD UEXT3GCELL(Optional)
ADD UTYPRABHSPA(Optional)
This parameter specifies the time used for decision of HSUPA happy bit. If all the buffered user data can be transmitted at the current rate during the time specified by this parameter, the HSUPA happy bit is set to happy; otherwise, the HSUPA happy bit is set to unhappy.
ADD SCTPLNK(Optional)
ADD VPCLCX(Mandatory)
Link type
ADD UCELLHSDPA(Optional)
This parameter is used for setting the punish timer length for code adjust for hsdpa. This parameter indicates the HCS priority level The smaller the coverage of the cell is, the higher the priority level of the cell should be set. HCS priority of the cell belongs to. The parameter depends on HCS rules. For details, refer to 3GPP TS 25.304.
ADD UCELLHCS(Optional)
ADD TRMFACTOR(Optional)
ADD TRMMAP(Optional)
HSDPA background service bearer primary path HSDPA background primary path load threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the HSDPA background service.
ADD LOADEQ(Optional)
ADD TRMMAP(Optional)
HSDPA background service bearer secondary path HSDPA background primary secondary path load ratio threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the HSDPA background service.
ADD LOADEQ(Optional)
ADD TRMFACTOR(Optional)
ADD TRMMAP(Optional)
HSDPA conversational service bearer primary path HSDPA conversational primary path load threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the HSDPA conversational service.
ADD LOADEQ(Optional)
ADD TRMMAP(Optional)
HSDPA conversational service bearer secondary path HSDPA conversational primary secondary path load ratio threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the HSDPA conversational service. primary path load HSDPA high interactive threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the HSDPA high interactive service. secondary path load ratio HSDPA high primary threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the HSDPA high interactive service.
ADD LOADEQ(Optional)
ADD LOADEQ(Optional)
ADD LOADEQ(Optional)
ADD TRMFACTOR(Optional)
ADD TRMMAP(Optional)
ADD TRMMAP(Optional)
ADD TRMMAP(Optional)
ADD TRMMAP(Optional)
ADD TRMMAP(Optional)
ADD TRMMAP(Optional)
ADD LOADEQ(Optional)
HSDPA middle PRI interactive secondary path HSDPA low interactive primary path load threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the HSDPA low interactive service. HSDPA low interactive primary secondary path load ratio threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the HSDPA low interactive service. HSDPA middle interactive primary path load threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the HSDPA middle interactive service. HSDPA middle primary secondary path load ratio threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the HSDPA middle interactive service.
ADD LOADEQ(Optional)
ADD LOADEQ(Optional)
ADD LOADEQ(Optional)
ADD TRMFACTOR(Optional)
ADD TRMMAP(Optional)
ADD LOADEQ(Optional)
HSDPA IMS signaling bearer primary path HSDPA IMS signaling primary path load threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the HSDPA IMS signaling service.
ADD TRMMAP(Optional)
ADD LOADEQ(Optional)
HSDPA IMS signaling bearer secondary path HSDPA IMS signaling primary secondary path load ratio threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the HSDPA IMS signaling service.
ADD TRMFACTOR(Optional)
ADD TRMMAP(Optional)
ADD LOADEQ(Optional)
HSDPA signaling primary path load threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the HSDPA signaling service.
ADD TRMMAP(Optional)
ADD LOADEQ(Optional)
HSDPA signaling bearer secondary path load HSDPA signaling primary secondary path ratio threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the HSDPA signaling service.
ADD TRMFACTOR(Optional)
ADD TRMMAP(Optional)
ADD LOADEQ(Optional)
HSDPA streaming service bearer primary path HSDPA streaming primary path load threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the HSDPA streaming service.
ADD TRMMAP(Optional)
HSDPA streaming service bearer secondary path HSDPA streaming primary secondary path load ratio threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the HSDPA streaming service.
ADD LOADEQ(Optional)
ADD TRMFACTOR(Optional)
ADD TRMMAP(Optional)
ADD TRMMAP(Optional)
ADD VPCLCX(Optional)
ADD UNRNC(Optional)
SRNC will includeintra-frequencyfor handover RNC initiates the the IE "RB Id hard message" in the following cases. handover in the IE "SRNS Relocation Info", the target RNC should choose the IE "DL 15) HO_INTRA_FREQ_RPRT_1J_SWITCH: DCCHthe switch is on, the event 1J is included When message" and include the DL DCCH message that should be transmitted in the delivery of intra-frequency measurement transparentlyUE the UE by the source RNC. In control if the to version is R6. that case, the target RNC is integrity protecting 16) the message if applicable. HO_INTRA_FREQ_RPRT_6F6G_SWITCH: 2) IUR_TRG_SWITCH.the RNC is checked,to When the switch is on, When it is allowed relocation execution may trigger asUE is in start the 6F6G measurement if the an implementation mode. from the Iur interface. macro-diversity option If the UE has more than two links in the active set, the UE initiates the radio link whether to trigger hard handover Indicates synchronization parameters measurement. If the measured UE Rx-Txand cross the Iur interface between the RNC time offset of any radio link the neighboring RNC. is above a preset threshold (T0 + delta), the UE reports the event 6F; if the measured value is below a preset threshold (T0 - delta), the UE reports the event 6G. IMA group number of the low end port 17) HO_INTRA_FREQ_SOFT_HO_SWITCH: Priority of coverage-based inter-frequency When the switch is on, the cells on the RNC handover. the soft handover. When the RNC can active "0" means that waitthe events 1A, interA timer to RNC the coverage-based1B, 1C, or receives reports on for the response to active frequency in soft handover procedure. set updatehandover is not supported. 1D, associated addition, removal, and "1" means the highest priority.of the soft the replacement of handover cell "3" means lowest priority.initiated. handover are wait for the response to the cell A timer to RNC The lower the priority, the easier it is for 18) update confirm from UE in forward handover coverage-based inter-frequency handover and HO_MC_MEAS_BEYOND_UE_CAP_SWITCH procedure. the neighboring cell to be delivered as the : When the switch is on, the neighboring cell measurement object. For beyond the is more whose frequency band is example, it UE's possible for can also be deliveredpriority intercapabilities a neighboring cell of in the 1 than a cell of priority 2 to be delivered as the frequency measurement list. measurement object and handover. 19) HO_MC_NCELL_COMBINE_SWITCH: When the switch is on, the neighboring cell combined algorithm is used during the delivery of timer to RNC waitmeasured. When the in A the objects to be for paging response switch ishandover procedure. forward not on, the optimal cell algorithm is used. 20) HO_MC_SIGNAL_IUR_INTRA_SWITCH: A timer to RNC waiton, intra-frequency When the switch is for the response to physical channel reconfiguration interface if the handover is allowed over the Iur in hard This parameter specifies the NodeB host type handover procedure. UE has only signaling. in RNC Node Redundancy function. If the 21) HO_MC_SIGNAL_SWITCH: When the parameter value is SINGLEHOST, on the switch is on, quality measurement the physical NodeBset managed only by signaling setup but active is is delivered after one RNC. If the A timer to RNC wait for relocation request in parameter value is PRIMHOSTis at the cell before service setup. If the UE or SECHOST, forward handover procedure. the physical NodeB can signals after accessing verge or receives weak be managed by two RNCs. the network, the RNC can trigger interBy default,or inter-RATis managed by the host the NodeB handover when frequency of signal quality of the target the UE Threshold the host RNC fails, the physical RNC. WhenRRC. sets up the triggering inter-frequency(Ec/No) frequencymanaged by the secondary RNC. NodeB is for 22) HO_MC_SNA_RESTRICTION_SWITCH: measurement. Whenmode is setis on, the mode,controls the If the the switch to event RNC this UEs in the is used to set measurement control parameter connected state based on the configurations on the CN. The UEs can only on the event 2C. access and is set to periodical mode, this If the mode move in authorized cells. parameter is used to estimate the periodical reports and only if quality of the target frequency is beyond the threshold, the DRD procedure is triggered.
ADD UNRNC(Mandatory)
ADD VPCLCX(Optional)
SET USTATETIMER(Optional)
SET USTATETIMER(Optional)
ADD UINTERFREQNCELL(Optional)
SET USTATETIMER(Optional)
SET USTATETIMER(Optional)
SET USTATETIMER(Optional)
ADD UNODEB(Optional)
SET UCORRMALGOSWITCH(Optional)
ADD UCELLMBDRINTERFREQ(Optional)
ADD UCELLMBDRINTERFREQ(Optional)
Threshold of signal quality of the target frequency for triggering inter-frequency(RSCP) measurement. If the mode is set to event mode, this parameter is used to set measurement control on the event 2C. If the mode is set to periodical mode, this parameter is used to estimate the periodical reports and only if quality of the target frequency is beyond the threshold, the DRD procedure is triggered. A timer to RNC wait for the response to the TrCh reconfiguration or RB reconfiguration response from UE in hard handover procedure. DL activity factor of the HSUPA background This parameter determines whether the service. Signals might be discontinuously compressed mode (CM) is permitted for transmitted because admission thresholdthe the detection Average throughput of the activationIf the of UE when the HSDPA services exist. changes of conversational service and sourceof PBR of HSDPAinterface number of best effort traffic. TRUE, compressed If Optical service. The activity the sumend port as low defined parameter value is set to of dataaccessed HSDPA BEfactor is lower all the is permitted on HSDPA, and is users HSDPA mode the ratio of signal throughput admission than the average transmission time to channel services can be set up when factors of the occupation time.HSDPA BE service multiplied activity the compressed threshold of the Thethe parameter value is set mode is activated. If same transport channel might be different in by FALSE, channel switch onaccessed HSDPA to the sum of GBR of all the UL and DL. indicates that the H2D (from HSBE users,DCH) should be performed before QoS of the DSCH to it accessed users cannot be satisfied and new compressed mode is started, and no HSDPA HSDPA BE services are not allowed. services should exist when compressed mode Otherwise, the QoS can be satisfied and new is activated. HSDPA BE is used for the compatibility of the services are allowed. This switchfactor of the HSUPA conversational DL activity HSDPA Signals might be discontinuously service. terminals existing in the network because these HSDPA the activationnot transmitted because of terminals do detection support the activated compressed mode on of conversational service and source changes HSDPAservice. The activity factor is defined as of data services existence. DL activity factor of the HSUPA interactive the ratio Signals might be discontinuously service. of signal transmission time to channel occupation time. Theof the activationof the transmitted because activity factors detection same transport channel might source changes of conversational service and be different in ULdata service. The activity factor is defined as of and DL. the ratio of signal transmission time to channel occupation time. The activity factors of the same transport channel might be different in UL and DL.
SET USTATETIMER(Optional)
ADD VPCLCX(Optional)
SET UADMCTRL(Optional)
ADD UCELLCAC(Optional)
SET UCMCF(Optional)
SET UADMCTRL(Optional)
SET UADMCTRL(Optional)
Length of smoothing filter window of HSDPA power requirement. The minimum number of HSDPA RAB establish request per CPUS to report KPI LengthIn a checking period,if the number of alarm. of smoothing filter window of HSDPA bit rate. RAB establish request is higher than HSDPA the threshold and the HSDPA RAB setup successful of HSDPA RAB setup successful Threshold ratio is lower than this threshold,the KPI alarm of HSDPA RAB setup ratio is ratio per CPUS to report KPI alarm. In a reported. period,if the ratio is lower than this checking threshold and the number of HSDPA RAB establish request is higher than the related threshold,the KPI alarm of HSDPA RAB setup ratio is reported.
SET UKPIALMTHD(Optional)
SET UKPIALMTHD(Optional)
SET UADMCTRL(Optional)
DL activity factor of the HSUPA streaming service. Signals might be discontinuouslyof the Average throughput admission threshold transmitted because of the activation detection HSDPA streaming service. If the sum of PBR of conversational service and users ischanges of all the accessed streaming source lower of data service. The activity factor is defined as than the average throughput admission the ratio of signal transmission timeservice threshold of the HSDPA streaming to channel occupation time. sum activity factors of the multiplied by the The of GBR of all the same transport channel might be different in accessed streaming users, it indicates that the UL and the accessed users cannot be satisfied QoS of DL. and new HSDPA streaming services are not allowed. Otherwise, the QoS can be satisfied and new HSDPA streaming services are allowed.
ADD UCELLCAC(Optional)
SET LICENSE(Optional)
The total HSDPA traffic of all operators cannot exceed the HSDPA value in the license. The cell is shut down automatically only when the HSDPA user number the first MAC-d PDU This parameter specifies is no greater than the threshold. HS-DSCH. For BE services, the size on the size of MAC-d PDUs is usually set to a large value. For streaming services, the size remains the same value as that on the DCH. This parameter specifies the second MAC-d The size must beHS-DSCH. of 8 BE services, PDU size on the a multiple For bits. the size of MAC-d PDUs is usually set to a large value. For streaming services, the size remains the same value as that on the DCH. This parameter specifies the third MAC-d PDU The size must be a multipleBE 8 bits. size on the HS-DSCH. For of services, the size of MAC-d PDUs is usually set to a large value. For streaming services, the size remains the same value as that on the DCH. This parameter specifies the fourth MAC-d The size must beHS-DSCH. of 8 BE services, PDU size on the a multiple For bits. the size of MAC-d PDUs is usually set to a large value. For streaming services, the size remains the same value as that on the DCH. This parameter specifies the fifth MAC-d PDU The size must be a multipleBE 8 bits. size on the HS-DSCH. For of services, the size of MAC-d PDUs is usually set to a large value. For streaming services, the size remains the same value as that onMAC-d PDU This parameter specifies the sixth the DCH. The size must be a multipleBE 8 bits. size on the HS-DSCH. For of services, the size of MAC-d PDUs is usually set to a large value. For streaming services, the size remains the same value as that on the DCH. This parameter specifies the seventh MAC-d The size must beHS-DSCH. of 8 BE services, PDU size on the a multiple For bits. the size of MAC-d PDUs is usually set to a large value. For streaming services, the size remains the same value as that on the DCH. This parameter specifies the eighth MAC-d The size must beHS-DSCH. of 8 BE services, PDU size on the a multiple For bits. the size of MAC-d PDUs is usually set to a large value. For streaming services, the size remains the same value as that on the DCH. The size must be a multiple of 8 bits.
ADD UCELLDYNSHUTDOWN(Optional)
ADD UTYPRABHSPA(Optional)
ADD UTYPRABHSPA(Optional)
ADD UTYPRABHSPA(Optional)
ADD UTYPRABHSPA(Optional)
ADD UTYPRABHSPA(Optional)
ADD UTYPRABHSPA(Optional)
ADD UTYPRABHSPA(Optional)
ADD UTYPRABHSPA(Optional)
ADD UTYPRABHSPA(Optional)
This parameter specifies the number of HSDSCH MAC-d PDU sizes. Currently, only PS conversational services can be configured with multiple HS-DSCH MAC-d PDU sizes. Other services can have only one HS-DSCH MAC-d PDU size.
ADD VPCLCX(Mandatory)
Slot number According to the relevant protocols, MIMO, If E_F_DPCHHS-SCCH Less Operation cannot 64QAM, and are selected, the corresponding function will be enabled; otherwise, disabled. be configured concurrently to the same UE. This parameter specifies the configuration preference of MIMO, 64QAM, and HS-SCCH Less Operation when both is usually triggered HSPA serving cell change the UE and the cell support theseTo avoid frequent serving cell by event 1D. three features. If change which may affect the system 64QAM,MIMO,E_FACH,DTX_DRX,HS_SCCH performance, a protection L2ENHANCED are _LESS_OPERATION and timer TimerHSPA is This parameter specifiesbe started upon HSPA needed. the corresponding function will timer shall the difference selected,Thistotal HSPA power and the be between thechanged, i.e. the serving HSDSCH serving cell enabled; otherwise, disabled. of a cell. The maximum transmission power cell changed or the EDCH serving cell maximum And no more 1D-triggered power can changed. value of HSPA dynamical serving be adjusted shall be performed until the timer cell change to the total amount of HSPA power. For details about thisshall not restrict expires. However, this timer parameter, refer to 3GPP TS 25.308. HSPA serving cell change to another cell in the active set if current serving cell is to be removed from the active set. The value 0 means this timer shall not be started and serving cell change be initiated immediately. This parameter specifies whether the Mac-hs transport block transmitted in HS-SCCH Less Operation mode supports second HS-PDSCH code. For details, refer to the 3GPP TS 25.321 protocol. This parameter specifies whether the Mac-hs transport block transmitted in HS-SCCH Less Operation mode supports second HS-PDSCH code. For details, refer to the 3GPP TS 25.321 protocol. This parameter specifies whether the Mac-hs transport block transmitted in HS-SCCH Less Operation mode supports second HS-PDSCH code. For details, refer to the 3GPP TS 25.321 protocol. This parameter specifies whether the Mac-hs transport block transmitted in HS-SCCH Less Operation mode supports second HS-PDSCH code. For details, refer to the 3GPP TS 25.321 protocol. The parameter specifies the number of HSDPSCH codes. This parameter is valid only when "Allocate Code Mode" is set to "Manual". For detailed information about this parameter, refer to 3GPP TS 25.308.
ADD UCELLALGOSWITCH(Optional)
SET UFRC(Optional)
ADD UCELLALGOSWITCH(Optional)
ADD UCELLHSDPA(Optional)
SET UHOCOMM(Optional)
SET UHSSCCHLESSOPPARA(Optional)
SET UHSSCCHLESSOPPARA(Optional)
SET UHSSCCHLESSOPPARA(Optional)
SET UHSSCCHLESSOPPARA(Optional)
ADD UCELLHSDPA(Optional)
ADD UCELLHSDPA(Optional)
Mode" is set to specifies the The number of The parameter "Automatic". minimum number codes HS-PDSCH codes (SF=16). This of the used by the HS-PDSCH is dynamically set between "Code Max Number for HSparameter is valid only when "Allocate Code PDSCH" andto Automatic. The number of Mode" is set "Code Min Number for HSPDSCH", based onHS-PDSCH is dynamically codes used by the whether the code tree is idle between When the code resource used by set or busy. "Code Max Number for HSthe non-HSPA services is little, the HS-PDSCH PDSCH" and "Code Min Number for HSuses the rest idleon the idle much of the code PDSCH", based codes as state as possible, and the maximum number of idle codes tree. When the non-H services need more (SF=16 continuous codes) is equal willthe code resources, the non-H service to value of "Code Max Numberused by the HSgradually occupy the codes for HS-PDSCH". PDSCH. The number of codes (SF=16 continuous codes) the HS-DPSCH reserved is Measure Power Offset (MPO) Constant is not less compute value of Code Min Number used to than the Measure Power Offset, as for HS-PDSCH. Power Offset = Max(-6, shown in Measure Min(13,CellMaxPower - PcpichPower Measure Power OffsetConstant)). For details of the IE "Measure Power Offset", refer to 3GPP TS 25.308.
ADD UCELLHSDPA(Optional)
ADD UCELLHSDPA(Optional)
ADD UEXT3GCELL(Optional)
This parameter indicates the preferred transmit diversity mode of the HSPDSCH.
ADD UCELLSETUP(Mandatory)
ADD VPCLCX(Mandatory)
Subrack number This parameter decides the maximum number of subscribers that the NodeB can schedule in a TTI period. For detailed information of this parameter, refer to 3GPP TS 25.308. This parameter specifies the time interval of sending HSUPA scheduling information for TTI 10ms when the user has Schedule Grant. This parameter specifies the time interval of sending HSUPA scheduling information alone for TTI 10ms when the user has no Schedule Grant and its buffer length is greater than zero. This parameter specifies the time interval of sending HSUPA scheduling information for TTI 2ms when the user has Schedule Grant. UL activity factor of the HSUPA background This parameter specifies the time interval of service. Signals might be discontinuously sending HSUPA scheduling information alone transmitted because of the activation detection forconversational service and source changes of TTI 2ms when the user has no Schedule Grant and its buffer length isfactor is defined as of data service. The activity greater than zero. the ratio of signal transmission time to channel occupation time. The activity factors of the same transport channel might be different in UL and DL.
ADD UCELLHSDPA(Optional)
SET UFRC(Optional)
SET UFRC(Optional)
SET UFRC(Optional)
SET UFRC(Optional)
SET UADMCTRL(Optional)
SET UDCCC(Optional)
ADD UNODEBALGOPARA(Optional)
SET UCMCF(Optional)
SET UADMCTRL(Optional)
SET UDCCC(Optional)
UE when HSUPA services exist. If the parameter value is set to Permit, compressed mode is permitted on HSUPA, and HSUPA services can be set up when the compressed Threshold dynamicdecrease of HSUPA BE is for rate CE algorithm When activated. If the parameter on NodeB to mode the value is set service soft handover. If the current rate UE is applied, channelconsumption of HSUPA is Limited, the CE switch on E2D (from E-DCH beyond the threshold, the rate dynamic CE over the EDCH based on the GBR.performed before the to lowered to thebe When the is DCH) should threshold applied, the CE the soft algorithm on mode isis not beforeno HSUPA compressed NodeB started success of the handover, thus ensuring UE is based on the the and consumption of HSUPA services should the when the compressed soft handover ofexistHSUPA BEHSUPA UE is MBR. If the CE consumption of service. The mode is activated. If the parameter value is set rate increase of HSUPACE SHO status is not in LDR will not based on the GBR, the RNC determinesselect to BasedonUECap, the limited by this parameter.rate reduction. If the HSUPA users to dothe compressed mode on whether to activate data CE consumption of HSUPA UE is based on E-DCH based on the UE capability, and the MBR,the CE LDR will selectwhen theusers whether to establish an E-DCH HSUPA to do data rate reduction on condition that the compressed mode is activated. HSUPA DCCC switch is ON. This switchfactor of for the compatibility of the UL activity is used the HSUPA conversational HSUPA Signals might be discontinuously service. terminals existing in the network because these HSUPA the activationnot terminals do detection transmitted the UE for rate adjustment over the Strategy of because of support the compressed mode activated on the of conversational service and source changes EDCH. RATE_UP_AND_DOWN_ON_EDCH E-DCH.service. The activity factor is defined as of data that the rate over the EDCH can be indicates the ratio of signal transmission time to channel raised or lowered. occupation time. The activity factors of the RATE_UP_ONLY_ON_EDCH indicates that same transport channel can only be raised. the rate over the EDCH might be different in UL and DL. in low activity state, it is no need When UE is to degrade the traffic rate to the threshold for HSUPA DCCC before state transition to CELL_FACH. That means UE can transit to CELL_FACH state at any rate over the EDCH. Threshold of all the HSUPA user PBR whose schedule priority is the same as that of users to be admitted. Threshold of all the HSUPA user PBR whose schedule priority is higher than that of users to be admitted.traffic initial bit rate. When DCCC HSUPA BEfactor of the HSUPA interactive UL activity algorithm switch might be discontinuously service. Signals and HSUPA DCCC algorithm switch are enabled, the the activation detection transmitted because of uplink initial bit rate will beconversational service uplink max bit rate is of set to this value if the and source changes higher than the initialactivity factor is defined as of data service. The bit rate. the ratio of signal transmission time to channel occupation time. The activity factors of the same transport channel might be different in UL and DL. Threshold of all the HSUPA user PBR whose schedule priority is lower than that of users to be admitted. The minimum number of HSUPA RAB establish request per CPUS to report KPI LengthIn a checking period,if the number of alarm. of smoothing filter window of HSUPA bit rate. RAB establish request is higher than HSUPA the threshold and the HSUPA RAB setup successful ratio is lower than this threshold,the KPI alarm of HSUPA RAB setup ratio is reported.
ADD UCELLCAC(Optional)
ADD UCELLCAC(Optional)
SET UFRC(Optional)
SET UADMCTRL(Optional)
ADD UCELLCAC(Optional)
SET ULDM(Optional)
SET UKPIALMTHD(Optional)
SET UKPIALMTHD(Optional)
Threshold of HSUPA RAB setup successful ratio per CPUS to report KPI alarm. In a checking period,ifof the HSUPA streaming UL activity factor the ratio is lower than this threshold and the number of HSUPA RAB service. Signals might be discontinuously establish request is higher than the related transmitted because of the activation detection threshold,the KPI service and source changes of conversational alarm of HSUPA RAB setup ratio is reported.The activity factor is defined as of data service. the ratio of signal transmission time to channel occupation time. The activity factors of the same transport channel might be different in UL and DL.
SET UADMCTRL(Optional)
SET LICENSE(Optional)
The total HSUPA traffic of all operators cannot exceed the HSUPA value in the license.
ADD UCELLLDM(Optional)
ADD UCELLLDM(Optional)
HSUPA auto retransmit load trigger threshold. The cell is shut down automatically only when the HSUPA user number is no greater than the threshold.
ADD UCELLDYNSHUTDOWN(Optional)
ADD TRMMAP(Optional)
HSUPA background service bearer primary path HSUPA background primary path load threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the HSUPA background service.
ADD LOADEQ(Optional)
ADD TRMMAP(Optional)
HSUPA background service bearer secondary path HSUPA background primary secondary path load ratio threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the HSUPA background service.
ADD LOADEQ(Optional)
ADD TRMFACTOR(Optional)
ADD TRMMAP(Optional)
ADD LOADEQ(Optional)
ADD TRMMAP(Optional)
ADD LOADEQ(Optional)
ADD TRMFACTOR(Optional)
ADD LOADEQ(Optional)
HSUPA high interactive primary path load threshold HSUPA high primary secondary path load ratio threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the HSUPA high interactive service.
ADD LOADEQ(Optional)
ADD TRMFACTOR(Optional)
ADD TRMMAP(Optional)
ADD TRMMAP(Optional)
ADD TRMMAP(Optional)
ADD TRMMAP(Optional)
ADD TRMMAP(Optional)
ADD TRMMAP(Optional)
ADD LOADEQ(Optional)
HSUPA middle PRI interactive secondary path HSUPA low interactive primary path load threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the HSUPA low interactive service. HSUPA low interactive primary secondary path load ratio threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the HSUPA low interactive service.
ADD LOADEQ(Optional)
ADD EMU(Optional)
Humidity alarm switch Upper limit of humidity. When the humidity exceeds the upper limit, a humidity alarm is reported. Lower limit of humidity. When the humidity is lower than the lower limit, a humidity alarm is reported. HSUPA middle interactive primary path load threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the HSUPA middle interactive service. HSUPA middle primary secondary path load ratio threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the HSUPA middle interactive service.
ADD EMU(Optional)
ADD EMU(Optional)
ADD LOADEQ(Optional)
ADD LOADEQ(Optional)
ADD VPCLCX(Optional)
ADD TRMMAP(Optional)
ADD LOADEQ(Optional)
HSUPA IMS signaling bearer primary path HSUPA IMS signaling primary path load threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the HSUPA IMS signaling service.
ADD TRMMAP(Optional)
ADD LOADEQ(Optional)
HSUPA IMS signaling primary secondary path load ratio threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the HSUPA IMS signaling service.
ADD TRMFACTOR(Optional)
ADD TRMMAP(Optional)
HSUPA signaling bearer primary path HSUPA signaling primary path load threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the HSUPA signaling service.
ADD LOADEQ(Optional)
ADD TRMMAP(Optional)
ADD LOADEQ(Optional)
HSUPA signaling bearer secondary path load HSUPA signaling primary secondary path ratio threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the HSUPA signaling service.
ADD TRMFACTOR(Optional)
ADD TRMMAP(Optional)
ADD LOADEQ(Optional)
HSUPA streaming service bearer primary path HSUPA streaming primary path load threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the HUDPA streaming service.
ADD TRMMAP(Optional)
HSUPA streaming service bearer secondary path HSUPA streaming primary secondary path load ratio threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the HSUPA streaming voice service.
ADD LOADEQ(Optional)
ADD TRMFACTOR(Optional)
ADD TRMMAP(Optional)
ADD TRMMAP(Optional)
ADD TRMFACTOR(Optional)
ADD VPCLCX(Optional)
ADD VPCLCX(Mandatory)
This parameter specifies the hysteresis value for event 1A. The value of this parameter correlates with slow fading. The larger the value of this parameter, the less possibility of ping-pong effect or wrong decision. But the HSUPA voice service bearer in time. For the event might not be triggered primary path definition, refer to 3GPP TS 25.331. Event 1A is a key event that adds a cell to the active set. To ensure timely handover, the hysteresis of service should be set a little HSUPA voiceevent 1Abearer secondary path smaller than those of events 1B, 1F, 1C, and This parameter specifies the hysteresis value 1D.event 1B. The value of thisnot be too large, for But the difference should parameter otherwise the soft handoverThe largerbe correlates with slow fading. ratio can the affected.thisaddition, thisthe less possibility of parameter is related value of In parameter,service uplink factor WCDMA HSUPA voicetrigger delay. to filter coefficient and ping-pong effectspecifies the hysteresis value This parameter or wrong decision. But the As for might not be triggered in time. For the impact event the1C. The on network performance: for the UE that enters the this parameter Forevent refer to value of SHO area, increase definition, with slow fading. The larger the 3GPP TS 25.331. correlates of the hysteresis means decrease of to filter In addition, this parameter isless possibility of related the SHO value of this area. But of the highthat leaves the SHO area, UE end VCL port VCI valuefor parameter, the coefficient effect or wrong decision. But the delay. ping-pong and trigger of the SHO area. If the that means enlargingnetwork hysteresis value This parameter on As for might not specifies the in time. For the the impact triggered performance: event of UEs entering of this parameter be number UE that enters the SHO area, the for event 1D. The value the area and increase For the refer to 3GPP TS 25.331. definition, UEs leaving the The are equal, number of with slow fading. area larger the the correlates of the hysteresis means decrease of to filter In addition, thiswill not be affected. the SHO is related real SHO for parameter, the less theThe larger value of this theparameterVCL port SHO area, area. But ratio triggerendleaves possibility of the VPI value of this parameter, the stronger the coefficient effect highthat decision. But the and UE delay. the value ofenlarging of the SHO area. If the ping-pong or wrong that means As for might not be triggeredfluctuation. Thus, capability of resistingnetworkarea and thethe event the impact on signal performance: number UEUEs entering the in time. For of that enters the SHO area, increase For ping-pong effect can TS resisted, but the the the of UEs leaving the 25.331. definition, refer to 3GPP bearea are equal, the number of the hysteresis means decrease the SHO the varying of ratiosignal inbe affected. of to filter the In addition, thiswill not response toThe larger real SHO for theparameter is relatedSHO area, area. But algorithm becomes slower. UE that leaves the handover of this parameter, the stronger the coefficient delay. the value and trigger of the SHO area. If the that parameter specifies the performance: This means enlargingnetwork hysteresis Thus, As for the impact on capability of resisting signal fluctuation. value number UEUEs enteringof this parameter area and increase for event 1J. The valuethe SHO area,but the For the of that enters the resisted, the the ping-pong effect can bearea are equal, the number of with slow fading. The larger the UEs leaving the correlates the signal in response to the of the hysteresis means decrease of the SHO varying of ratio will not be affected. The larger real SHO for parameter, the less the SHO area, value of this the UE that leaves possibility of area. But algorithm becomes slower. handover of this parameter, the stronger the the value effect or wrong decision. But If the ping-pong that means enlarging of the SHO area. the capability of not entering the fluctuation. Thus, event might resisting signal area and thethe number of UEs be triggered in time. For the ping-pong effect can TSarea are equal, the definition, refer to 3GPP be resisted, but the number of UEs leaving the 25.331. varying of ratiosignal inbe affected. The filter In addition, this parameter is related to real SHO the will not response to the larger handover of this parameter, the stronger the coefficient and trigger delay. slower. the value algorithm becomeshysteresis value This parameter specifies the performance: As for the of impact on signal fluctuation. Thus, capability1F.resistingnetwork parameter for event that enters the this area, increase The value For ping-pong effect canof SHO the the UEwith slow fading. The larger the be resisted, but the correlates of the hysteresis means decrease of the SHO varying of the signal in response possibility of to value But for parameter, the less the the area, area. of this the UEbecomes slower. that leaves SHO handover algorithm wrong decision. But the ping-pong effect or of the SHO area. If the that means enlarging event might not entering the area and thethe number of UEs be triggered in time. For definition, refer to 3GPP TSarea are equal, the number of UEs leaving the 25.331. In addition, thiswill not be affected. The filter real SHO ratio parameter is related to larger coefficientof this parameter, the stronger the the value and trigger delay. 2B. Hysteresis value for the event capability of resisting signal fluctuation.with The value of this parameter correlates Thus, the ping-pong effect can bevalue of this the slow fading. The larger the resisted, but varying of the signal in response to the parameter, the stronger the capability of handoversignal fluctuation. Thus, the pingresisting algorithm becomes slower. pong effect can be resisted, but the speed of the handover algorithm to respond to signal change becomes lower, and therefore event 2B might not be triggered in time.
SET UINTERRATHOCOV(Optional) ADD UCELLINTERRATHOCOV(Optional) SET UINTERRATHONCOV(Optional) ADD UCELLINTERRATHONCOV(Optional) ADD UCELLMBDRINTERRAT(Optional)
SET UINTERRATHOCOV(Optional) ADD UCELLINTERRATHOCOV(Optional) SET UINTERFREQHOCOV(Optional) ADD UCELLINTERFREQHOCOV(Optional) ADD UCELLMBDRINTERFREQ(Optional)
Hysteresis the threshold) and event 2F (the lower than value for the event 2F. 2F might effect or wrong decision,disable the but event and event quality parameter correlates with The value 2F is used to event 2C. estimated of thisin time. currently used Hysteresis value forTherefore, Hystfor2D can the not be triggered of the compressed The larger the value of this Event mode. than the threshold). slowvalue of this parameter correlates with frequency is higher mode, this parameter is The fading. report basis of recommended In periodical on the probability of ping-pong be increased enable the compressed mode parameter, to 2D is to resist the ping-pong effect of event 2D slow fading.the smaller used usedinter-frequencybut event 2D might value and 2F is decision,disable the ping-pong effect or wrong used to handover and quality of value of this used frequency The event the the currentlycan also be the is larger (thebe triggered in time. effect statistics. Hystfor2F parameter, can not compressed mode. Therefore,event 2F (the Hystfor2D stronger the capability of resisting signal lower than the threshold) thisenabling or is increased to report mode,andrecommended In increased on the frequent parameter beperiodical reduce the currentlyeffect can be fluctuation. Thus, of basis of the ping-pong used estimated quality ping-pong effect of event 2D disabling of compressed. handover ping-pong used and inter-frequency the handover value to resist the than the threshold). Event resisted, but higher theof frequency is the speed parameters, you is To setstatistics. Hystfor2F can also be the (the quality value of to event 3A. effect usedvaluesfor the signal change mode algorithm toof enablefollowing factors: radio respond the Hysteresis to the currently used frequency 2D is than the threshold) compressed (the should consider the frequent enabling or lower and increased to reduce to disable the 2B might becomes lower, usedthereforeevent 2Fwith The value of (with slow fading event and event quality parameter correlates 2Fthisandthe is of environmentcompressed modecharacteristic), estimatedof Thein time.the value used avoid disabling and this not be handover distance, and moving speed triggered larger currently of to slow fading. mode. Therefore, Hystfor2D can compressed higher than actual frequency is stronger the active set. unnecessary updates of the capability ofEvent Hysteresis value the basis of threshold). parameter,The valueinter-RAT this parameter the for range of measurement be increased on recommended of the usedvalues of the parameters, you 2D is UE. to enable To setand reports. the compressedpingperiodicaldB to fluctuation. Thus, the resisting signal 5 dB.the addition, this mode value the inter-frequency handover ping-pong can be consider used In disable the radio 2 valuethe to event 3C. Hysteresis2F is aimsfollowing factors: for to prevent the misand event can be avoided, but the speed of should This statistics. pongparameter Hystfor2F can effect effectis mode. Therefore, also be with parameter this parameter correlates and The value of (with slow filter coefficientof can compressed related to fading characteristic), Hystfor2D environment reduce frequent enabling or decision caused by unexpected jitterssignal the handover algorithm to value of this increased to The larger theof recommended trigger handover the basis respond to speed slow fading. inter-RAT handover decisions. be increased on distance, the inter-RAT actual delay. and moving signals during change becomes lower. If disabling of the stronger the capability of compressed. parameter,The value range ofinter-RAT value UE. inter-frequency handover ping-pong of the and hysteresis thesetthe an excessively The HystforInterRAT is parameters, handoversignal fluctuation. to thisthe you To setstatistics. Hystfor2F can also be the values of and Thus, parameter resisting decision threshold effect 2 dB to 5 dB. cell to which thepingcan be consider the followingdetermine is this handover high value, the GSM In addition,the speed of should factors: UE pong effectis reduce frequentbut can be avoided, handovers. increased trigger be of goodenablingradio parameter to (with inter-RAT coefficient or related to filter quality. and whether to handed over must slow fading environmentcompressed modecharacteristic), the handover algorithm this parameter,avoid disabling of value of to respond to signal and to trigger handover distance,for triggering speed The larger the conditions and moving the Therefore, actual delay. updates of If the inter-RAT change becomes lower. resisting set. unnecessarycapability ofthe activesignal be stronger the valuedecision are hard to inter-RAT handover is of the UE.hysteresis theset to an excessively of this parameter handover values of ping-pong effect can To set the The call rangerate increases. be fluctuation. Thus, the In addition, this satisfied, dB to 5 dB. cellparameters, you drop which the UE can be consider the following factors: radio 2 and the high value, the GSM should but the speed ofto that in a cell where avoided, the The emulation resultof filter quality. Therefore, parameter is (with slowgood coefficient and related shows handover hands over must be to fading change environmentrespondspeed of UEs is high, for algorithm to the average moving to signal characteristic), trigger handover distance, and moving speed delay. for triggering the inter-RAT the conditions If the inter-RAT handover actual becomesa cell that covers highways, example lower. are hard to be satisfied, and handover The value range of this parameter of the UE.decision an excessively dB, because hysteresis is set to be set to 1.5 high value, HystforInterRAT can the GSM cellrate dB. In addition,handed increases. can call 2 dB to 5which the UE isthere are over the be drop terrain is flat and this in the cell the to few The emulation result shows that in a cell where parameter is related to filter coefficientfading must be which quality. Therefore, the and barriers ,of goodcauses small shadowhigh, for the average moving speed of UEs is trigger delay. triggering the inter-RATmoving conditionsIn a variation.a for cell where the average example decision are hard to be satisfied, and cell that covers handoverUEs is low, there highways, many speed of usually HystforInterRAT can be setare 1.5 dB, because the buildings,ratethe shadowto tall call drop so increases. fading variation is in the cell the terrain is flat and there cell where few The emulation result shows that in a arecan be comparatively big, and HystforInterRAT fading barriers , which causes a small shadow for the average moving speed of UEs is set to 3.0 In a cell where the averagehigh, dB. variation.a cell that covers highways, moving example speed of UEs is low, be setare 1.5 dB, because HystforInterRAT can there to usually many tall buildings, so the shadow fading variation is in the cell the terrain is flat and there are few comparatively big, and HystforInterRAT can be barriers , which causes small shadow fading in Hysteresis for inter-frequency hard handover set to 3.0 In a cell where the average moving variation. dB. periodical report mode. speed of UEs isis used to estimate themany This parameter low, there are usually intertall buildings, so the shadow fading variationthe frequency handover at the RNC. The larger is comparatively big, and HystforInterRAT can be value of this parameter, the stronger the set to 3.0 dB. capability of resisting signal fluctuation. Thus, the ping-pong effect can be resisted, but the speed of the handover algorithm to respond to signal change becomes lower, and therefore event 2B might not be triggered in time. This timer is started after a connection is established successfully. If a detection message is not received when this timer expires, the connection will be released. This timer is started after a connection is established successfully. When this timer expires, a detection message will be sent to the peer end.
SET SCCPTMR(Optional)
SET SCCPTMR(Optional)
ADD IPPATH(Optional)
ICMP packet length. It is the total length of the ICMP packet containing the IP header.
STR SCHTSK(Optional)
ADD UCELLACCESSSTRICT(Mandatory)
ADD UCELLACCESSSTRICT(Optional)
ADD UCELLSELRESEL(Optional)
ADD UCELLSELRESEL(Optional)
ADD UCELLSELRESEL(Optional)
ADD UCELLSELRESEL(Optional)
aims to prevent theregulation, the current cell According to the R ping-pong effect of the reselection, involves in cell selectionslow fading serving cell which is caused by the after the when the UE is on the added with the The measurement value is edge of the cell. ping-pong effect may trigger frequent location hysteresis value. The measurement hysteresis updatesprevent the ping-pong effect of the cell aims to (idle mode), URA updates (URA_PCH), or cell updates by the slow fading reselection, which is caused (CELL_FACH, CELL_PCH), is onthus edge of the cell. The when the UE and the increase the load of network signaling andtrigger frequent location ping-pong effect may the consumption of UE batteries. Set mode), URA updates updates (idle a proper measurement hysteresis to reduceupdates (CELL_FACH, (URA_PCH), or cell as much as possible effect of of the scheduled task as ensuring Number the slow fading as well the load of CELL_PCH), and thus increase timely cell updates of the UE. Accordingof UE network signaling and the consumption isto the Indicating whether the UE in idle mode CPICH RSCP a proper measurement batteries.cell emulation report of interallowed toSetCPICH RSCP the measurement reselect another Offset of whether the UE in idle mode is frequency hard handovers, intra-frequency Indicatingparameter is valid measurement hysteresis reduce as reselection when the as cell. This toselection ormuch dBm and barred value in to ranges 4 dBm to whenpossible set hysteresis access the cell. well as[Cell is 5 allowed cell SIB3]fading as When this cell effect in the mode. BARRED. of for indicator of the scheduled the If the Number idle slow iswhen taskslow ensuring in UE dBmBARRED, it to 4is cellby defaultof indicatesAccording to the status is updates the the UE in fading timely of neighboring cell UE. that the UEs parameter is ALLOWED, relative distance is 20 Offset CPICH idle mode variance is 8 barred to report ofmeasurement idle mode aredB and theselect/reselect when CPICHThisanother intra-frequencyinter-the cell RSCP emulation can select parameter is used fading variance cell value. the case of emergency calls. For m. In the cells where the slow for RSSI even in selection/reselection condition is frequency hardThe offset is the measurement handovers, subtracted from the cell measurement.average this parameter,of UEs is is low and the detailed information dBm to 5 dBm andrefer to of moving speed is set hysteresis ranges 4 measurement satisfied.example the suburbs and value before the neighboringparameter is NOT_ALLOWED, high, for If this cell when 3GPP TS by defaultcannot the slow countryside, 25.331. to 4 reselection. fading the UE in idle mod select another cell dBm reduce the measurementrelative distance intravariance is 8 dBdefines the offset of neglected and the hysteresis to frequency cell. The indicator can be cell is 20 This parameter guarantee timely locationslow fading UEs. The updates of Offsetthe cell CPICH Ec/No measurement m.case RSCP measurementFor detailed in In of cells where the hysteresisin variance calls. value cell less CPICHthe measurement higherinof emergency or reselection is,of UEs is value cell selection moving speed 3GPP when is low and the this parameter, cell UE istheidle information of inter-frequency cell reselectionsin Thresholdfor various types of refer to in the for average selection or reselection when the reselection likely for idle mode. suburbs and countryside, UE 25.331. is in high, it is When the quality (CPICH Ec/No the TSoccur, example better the slow fading idle mode. the mode. of neighboring cell CPICH measurement to and Offset theby UE) of the serving cell is lower reducereselection algorithm, this parameter is measured measurement hysteresis to In cell This capability is, but the slower the resistance timely location updates of UEs. The valuethis threshold plus the [Qqualmin] of the guarantee parameter is used forcell. This than forreacts to the border of a Ec/No used moving the environment changes. systemthe measurement hysteresis is, the less measurement. The offset is reselection higher inter-frequency cell subtracted fromFor cell, the information of this parameter, refer to parameter for intra-frequency by the network detailed for various measurementreselection in Threshold can be configured cell reselections the neighboring cell types of cell value is not likely it is will be started. This parameterbefore procedure25.304. to quality planner accordingthe reality. (CPICH Ec/No 3GPP TSand the better the slow fading idle reselection. cell mode. when to occur, When its value is 127. The intraconfigured by the NOTE:reselectionUE) of the serving cell is is measured capability is, but the slower the In cell algorithm, this parameter resistance cell reselection hasis valid only frequency this threshold plus a priority higher In FDD mode, this parameter the [Qqualmin] of lower for moving the environment changes. than used thereacts to the border of a cell. This For system inter-frequency set as TRUE. and than SIB11intra-frequency cell reselection when the Indicator is cell reselection the cell, can be configured parametercell reselection, the intra-frequency detailed information3GPP TS by the networkto inter-RAT will beto of this parameter, refer not For details, refer started. This25.331. procedure25.304. to reality. parameter is planner according 3GPP the impact on threshold should be cell reselection start network performance: As for TS when its value is 127. The intraconfigured NOTE:than the inter-frequency cell reselection higher The larger cell this parameter isavalid only when frequency the value of the parameter, the priority higher In FDD mode reselection hascell reselection start the inter-frequency lowerthreshold andset as cell reselection and than Indicator is inter-RAT SIB11the probability of selecting neighboring TRUE. start threshold. If the cell reselection threshold cells. The cell reselection, TS 25.331. inter-RAT smaller the value the parameter, intra-frequency For details, refer to 3GPP the value, the UEthe is set to a comparativelydoing so. higher the impact on threshold should be cellfor the probabilitynetwork performance: start of high As reselection start cell reselections, and the may frequently inter-frequency cell reselection higher thanthe value of the parameter, the the The largerthe UE may be largely consumed. If battery of start the probability of selecting neighboring inter-RAT cell reselection lowerthreshold and threshold is set to a the cell reselection cell reselection threshold start The smallerthe If cells.threshold.low the valueis difficult for cellthe comparatively value, it the parameter, is set the probability of high so. higherto a comparativelydoing value, the UEnot reselections to be started, and the UEand the may frequently start cell reselections, may timely reside in the cells with good quality, If battery of the UE may be largely consumed. affecting the qualitythreshold is set to a the cell reselection of communication between the UTRAN and the UE. For detailed for cell comparatively low valid when difficult is This parameter is value, it TS[Cell barred information, refer to 3GPP and 25.304. may not reselections SIB3] started, to be is BARRED. the UE indicator for It indicates that timely residethe the cells be measured next the delay of in cell can with good quality, affecting the quality of communication between time when [Cell barred indicator for SIB4] is set the UTRAN and the UE. For detailed lower to BARRED. The greater the value, the information, referthe 3GPP TS 25.304. the cell the frequency of to UE trying to read bar status. The smaller the value, the higher the frequency of the UE trying to read the cell bar status. For detailed information, refer to 3GPP TS 25.331.
ADD UCELLACCESSSTRICT(Optional)
ADD SAALLNK(Optional)
SET UHOCOMM(Optional)
reselection, and QoS, frequent handovers occur. The RNC will start the inter-frequency non-coverage based anti-ping-pong timer and prohibit the handover or measurement caused by the previous factors before the timeout of the timer. The larger this parameter, the better effect the anti-frequent handover. This, however, will affect the management policy of the cell or the quality of service felt by the users; the smaller this parameter, the more frequent the inter-frequency handover. CN flow control timer (short). The OVERLOAD message received repeatedly in this period will be discarded.
SET UIUTIMERANDNUM(Optional)
IMA group
IMA group
IMA identifier
IMA link number This parameter specifies whether it is allowed to use the initial rate of IMS signaling set on the LMT, that is,specifies the channel type of the This protocol versionvalue of [Ims initial rate]. IMA parameter signaling is carried on the - ON: If the IMS IMS signaling. DCH, the maximumand downlink are preferably - DCH: Both uplink rate of IMS signaling takes the value of [Ims initial rate]. carried on DCH. - OFF: The maximum rate of IMS signaling - HSDPA: Uplink is preferably carried on DCH, does not take is preferably [Ims initial rate]. and downlink the value of carried on HSDSCH. - HSPA: Uplink is preferably carried on E-DCH, and downlink isIub interface will increase after The MAC-c on preferably carried on HSDSCH. the Enhanced CELL_FACH is supported in the cell. When the UE enters the Enhanced CELL_FACH state, this parameter determines the guaranteed speed of the MAC-c flow that sends IMS data on the Iub interface.
ADD IMAGRP(Optional)
SET UFRC(Optional)
SET UFRCCHLTYPEPARA(Optional)
ADD UCELLEFACH(Optional)
ADD UIMSISNAMAP(Mandatory)
ADD UIMSISNAMAP(Mandatory)
SET UFRC(Mandatory)
This parameter specifies the initial access rate of IMS signaling. When the [Ims Bear enhanced switch] is ON: - If the IMS signaling is carried on the DCH in the downlink, the initial rate takes the larger value between this parameter and the CNassigned bit rate. - If the IMS signaling is carried on the HSPA, the MBR takes the larger value between this parameter and the CN-assigned bit rate.
ADD UIMSIIDNNSCNIDMAP(Mandatory)
ADD UIMSIIDNNSCNIDMAP(Mandatory)
ADD UCELLEFACH(Optional)
SET UDTXDRXPARA(Optional)
Minimum of on Iub interface will increase after The MAC-c IMSI route parameter in Intra Domain NAS Node Selector(IDNNS). the Enhanced CELL_FACHthe supported in the If no data is transmitted on is E-DCH for cell. When the UE enters the Enhanced several consecutive E-DCH TTIs, the interval CELL_FACHconsecutive patterns are at which two state, this parameter determines the maximum speed of the MAC-c flow that transmitted on the UL DPCCH should be sends IMS data on the Iub interface. Here, changed from DtxCycle1 to DtxCycle2. the value of DtxCycle2 is an integer multiple of the value of DtxCycle1. This parameter specifies the number of E-DCH TTIs. of This parameter specifies the number For details, refer subframes that the UE should consecutive to the 3GPP TS 25.214 protocol. monitor on each HS-SCCH of the HS-SCCH set immediately after the data reception on the HS-SCCH or HS-PDSCH. For details,of This parameter specifies the number refer to the 3GPP TS 25.214 protocol. monitor on the subframes that the UE should E-AGCH of the serving radio link and on the ERGCH of each radio link after the data transmission on the E-DCH. For details, refer to the 3GPP TS 25.321 protocol.
SET UDTXDRXPARA(Optional)
SET UDTXDRXPARA(Optional)
ADD EMU(Optional)
ADD SAALLNK(Optional)
Maximum allowed duration without credit The MAC-c on Iub interface will increase after TheEnhanced CELL_FACH is supported in the the integrity protection algorithm supported by RNC. Only the UE enters the Enhanced cell. When UIA1 is supported currently. CELL_FACH state, this parameter determines the guaranteedIub interface will increase that The MAC-c on speed of the MAC-c flow after sends interactive service data on the Iub in the the Enhanced CELL_FACH is supported interface. the UE enters the Enhanced cell. When CELL_FACH state, this parameter determines the maximum speed of the MAC-c flow that sends interactive service data on the Iub interface.
SET UUIA(Optional)
ADD UCELLEFACH(Optional)
ADD UCELLEFACH(Optional)
ADD UCELLMBDRINTERFREQ(Optional)
ADD UCELLINTERFREQHONCOV(Optional)
ADD UINTERFREQHOCOV(Optional) SET UCELLMBDRINTERFREQ(Optional) SET UINTERFREQHONCOV(Optional) ADD UCELLINTERFREQHOCOV(Optional) ADD UCELLINTERFREQHONCOV(Optional) ADD UCELLMBDRINTERFREQ(Optional)
ADD UCELLHOCOMM(Optional)
For the UE moving at the speedshould be setis various speeds, this parameter of 5 km/h, it recommended that this parameter be set to -17 Threshold toThrough emulation, the call drop to -95 dBm. stop inter-frequency Threshold UE withinter-frequency quantity of stop dB; for the to low for the UEs speed of 50 km/h, measurement moving at the moving at the rate remains with measurement quantity of measurement domain services. measurement it is recommended that this parameter be set RSCP of CS for speed for120 km/h when this parameter is set Ec/No to -14 dB; CS the UEmeasurement stop RSCP for domainmoving at the speed of The inter-frequency services. to -95 dBm. The km/h,(namely, compressed mode stop 120 inter-frequency measurementthis micro threshold it is recommended that stop Ec/No If the cell is a macro cell, it means that stop threshold is one of the key parameters parameter(namely, compressed mode in the be set to -12 enable threshold) in this cell. TodB. cells exist is one of the key parameters in the threshold) in which the UEs arethe traffic For the cellfunction of the policy.cells, theat inter-frequency handover of the moving absorption of signal qualitymicro This Threshold target inter-frequency this parameter should UEs various speeds,handover policy. This be bein parameter for triggering inter-frequency set affects compressed modethe proportion of the UEs in frequency Through start threshold should parameter affects active status of a cell and to -14 dB. and the the proportion ofcall drop compressed triggeremulation, the the set higher to mode stop threshold be cell lower, Threshold mode active status of measurement. for inter-frequencya setthe compressed rate of the hard handover. To set and ratesuccess MBDR switchlow used to setmoving at set the remains is thatsuccess rate of the UEs measurement the threshold for event 2D/2F be measurement with the hard handover. To set This is, of 120 km/h measurement quantity of parameter the parameter, speed by using youwhen this parameter is Threshold PStrigger need to consider the inter-frequency this higher for to event need to services. CPICH RSCP. RSCP on controldB. the domain HSPA consider the 2C. this parameter, youmeasurement quantity UE to -14 2D andwith are the compressedthe of measurement 2F measurement start mode following 2C is the moving speed of RSCP Events factors:triggeredspeed the signal and inter-frequency The event and 2F are the when of the UE following Eventsforfactors: moving you want to start the Ec/No 2DPS domain HSPA services. mode and and the switches. If compressed cell radius. starttheof stoptargetcompressed mode this threshold (namely, frequency is above quality radius.switches. If you want to start the the inter-frequency measurement start Ec/No startCS stop Thecell domain services, whenthe threshold for For and RSCP is used compressed one of the key parameters in the threshold) threshold. is mode earlier, set the threshold for Forthe measurement quantity formode is used compressed modeyou want to reduce the pingthreshold larger;handover when Ec/No start as CS domain services, set event 2D (namely, earlier,policy. This inter-frequency if compressed interas the2D larger; if you want parameters pingmeasurement quantity reduce interevent effect of starting and stopping the inthe threshold) is one of the key tofor of thethe in frequency measurement, the RNC sends the pong parameter measurement, the RNC sends the affects the proportion frequencyto stop the compressed modeUEs pong effect of starting andpolicy. This between stopping inter-frequency handover status of athe and signaling compressedstop theset the differencecelland mode compressed and signaling to mode,active difference between compressed mode, measurement,modeUEs in set the parameter and 2F the proportion ofifthe To set the inter-frequency the hard handover. UE events 2D affects larger. the success rate of measurement, if the UE the inter-frequency active status of a value is eventsthe signalswhen the measuredcell and compressed modelarger. to considerthe reports event 2F When 2D and 2F at need measured the is this parameter, you the entrance to an reports event 2F of the the parameter. To set the success rate when hard handover.the UE larger than the value of this too fast value elevator or a subway moving speed ofto following factors: the of this parameter. larger than and value change this parameter, youyou should start the mode Events 2D the 2F are theto consider the perform2D and 2F are the compressed mode and the cell radius. need compressed Events handover, following factors: moving speed of this start the startHSPA services, when you setisthe UE and compressed mode earlier and want used asthe For and stop switches. If you want to start RSCP to start and stop the cell radius.switches. If set inter-frequency compressed modequantity for parameter optimally to -90 set the threshold for the measurement earlier, dBm. threshold for compressed modeyou want to theis used as the earlier, For HSPA services, when Ec/No signaling to event 2D larger;is the relative threshold of pingmeasurement, the you want to reduce the pingthe This parameter if RNC the inter-frequency event effectcoefficient forsends reduce the cell 2D larger; if measurement quantity for stopping start interL3 filtering of starting and inter-frequency pong activate thewhether downlink MBDR the compressed mode and the for judging pong effect of starting and stopping algorithm measurement, measurement. the set sends the signaling to compressed mode,RNCthe difference between frequency measurement, if difference between of inter frequency is setof this parameter is in the the state. compressedcompressed mode UE reports the activate the mode, measured value start interThe physical meaning overloadand is It events 2D and percentage of the cell smaller event 2D when 2F larger. the representsmeasurement, if the UEand intrathe 2F larger. model reports eventsthe signals at the entrance to an frequency and of this parameter. same 2D When as the measurement of downlink. The than the value admission measurement. The difference is that event 2Dor control threshold value km/h, it is frequencywhen the at change tooof 5isto elevatorUE a subway the speed fast smaller For the this moving measured earlier downlink smaller value of for the inter-frequency parameter than the handover, you is, the start the the report period this parameter. be set to perform recommended that this should parameter goes into MBDR algorithm 480 ms,frequencythe report is inter For the UE for is UE moving at the5 km/h, it measurement theof atinter-frequencyspeed of compressed mode earlierwhereas this than and -100 dBm; moving the speed of According to the cell cell load sethigher to -17 overload state. that this parameter be set recommended When -85 dBm. this period forit optimally tothe RNCis intra-frequency measurement is parametertherecommended admission control 50 productis stop inter-frequency hierarchical of downlink cell that thekm/h,In toselection, can be speed of 50the Threshold UE moving at the chooses km/h, dB; for the be set to -97 dBm; adjusted 200 ms. practice, it measurement UE parameterand this parameter, for the lowerof proper inter-frequency threshold to traffic that this parameter be set and is measurement with performance measurement. it is recommended measurement it iscontrol according the speed of 120 km/h,quantity than moving at PS cell admission control threshold, parameters tothe UE movingservices. the downlink domainof this parameter, the of Ec/No dB; for implement coverage,speed for the value HSPA at the speed to -14 The larger andthat this parameter be set to -93 recommended traffic absorption. frequency is estimation,it is recommended inter this Ec/No downlink the The km/h, smoothing effect that the higher 120 inter-frequency measurement stronger MBDR algorithm of and stopinterdBm. INTER_FREQ_COV: coverage-based stop in overloadbe set tocompressed modelower the threshold state. -12 dB. but the parameter(namely, capability,are moving at the anti-fast-fading the UEs For the cell in whichthe frequency handover.thekey parameters in the threshold) is one of capability. If the at For the cell in which parameter should value of signal change tracing UEs are moving various speeds,handover policy. This be set INTER_FREQ_COV_NCOV: coverage-based inter-frequency this various speeds, set too small, unnecessary this parameter isthis parameternon-coverageto -95 dBm. Through emulation,should be set inter-frequency handover, and the call drop in parameter Through emulation, thethe UEs the proportion of call drop to -14 dB. affects frequently moving hardremains low for the UEschangedat the rate handover or active status triggered by based inter-frequency handover of a cell and compressed mode the UEs moving at the rate remains km/h when this parameter is set handover120 low for of may occur. speed estimation. when thishandover. To set the success km/h speed dBm. rate of the hard parameter is to -95 of 120 you need to consider the INTER_FREQ_TA: traffic-based interthis parameter, to -14 dB. and 2F are the compressed mode Events 2D handover, which includes the and frequency and 2F are thespeed of the UE following factors: moving compressed mode Events 2D start andsimilar to coverage-based inter- the functionradius.switches. If you want to start the the cell stop switches. If you want to start start and stop compressed mode earlier, set the threshold for frequency handover.when Ec/No is used as the For HSPA services, compressed modeyou want to the threshold for set event 2D larger; if earlier, inter-frequency pingmeasurement quantity want to reduce the event effect of starting and stopping the ping2D larger; if you for reduce the pong measurement, the RNC sends the signaling to pong effect of starting and stopping the compressed mode, set the difference between stop the compressed mode and the intercompressed mode, set the difference between events 2D measurement, if the UE reports frequency and 2F larger. eventsthe signals at the entrance to an 2D and When 2F when 2F larger. event the measured value is larger elevator or a subway change too fast to than the value of this parameter. perform2D and 2F are the compressed mode Events handover, you should start the compressed mode earlier and want to start the start and stop switches. If you set this parameter optimally to -90 set the threshold for compressed mode earlier, dBm. event 2D larger; if you want to reduce the pingpong effect of starting and stopping the compressed mode, set the difference between events 2D and 2F larger.
ADD UCELLMEAS(Optional)
ADD UCELLMBDRINTERFREQ(Optional) SET UINTERFREQHOCOV(Optional) SET UINTERFREQHONCOV(Optional) ADD UCELLINTERFREQHOCOV(Optional) ADD UCELLINTERFREQHONCOV(Optional)
ADD UCELLMBDRINTERFREQ(Optional)
SET UNCELLDETECTSWITCH(Optional)
SET UINTERFREQHONCOV(Optional)
ADD UCELLHOCOMM(Optional)
(2C) and stop or periodical reporting start start triggered switches. according to mode. the reselectionto triggerPilot If you want to interThresholdCommon inter-frequency the - CPICH: assessment Channel threshold for compressed mode earlier, set the RAT neighboring cell list Ratio SIB11 or measurement with measurement quantity of - Ec/No: Signal-to-Noise in the reduce the pingevent 2D the inter-frequencyto Thresholdlarger; if younon-HSPA services. to domain want FDD SIB12. If Received Signal Code Power RSCP for PStrigger inter-frequency - RSCP: pong effect of starting and stopping the of measurement with measurement quantity measurement indicator and Ec/No start RSCP The inter-frequencyuse the Inter-RAT measurement - CPICH_Ec/No:inter-frequency measurement. compressed mode, set the difference between Ec/No length for to compressedtoservices. the Timer for (namely, measurementdomain non-HSPAmode start are threshold PS indicatorfor event 2C or Intermeasurement 2F larger. set FALSE in no events 2D andquantityUE does not start Ec/No The inter-frequency the key parameters in the After inter-frequency measurement starts, system message,of measurement start if threshold) is one the measurement. The Frequencysignals at the entrance to anstart When the (namely, compressed mode when threshold periodical inter-frequency handover is performed corresponding measurement andThis inter-frequency dB. handover policy. cell physical oris one of the key parameters in the elevator unitIfis inter-frequency fast to threshold) affects the proportion FDD this timer expires, the change too of the UEs in reselection.a subway inter-frequency theto use the RSCP parameter - CPICH_RSCP: you should start the perform handover, the compressed mode (if inter-frequency handover policy. This measurement and active status of a cell and compressed mode measurement indicatorfor and set indicates quantity and Inter-RAT compressedstopped. The valuetoof the Inter-the mode earlier event this parameter affects the proportion0 TRUE but in started) are rateinter-frequency 2C or UEs no measurement indicator hardset measurement. the success for of the are handover. To set Timer length mode active status of a The and Frequency periodical measurement. parameter optimally to -85 dBm. compressed be enabled.to consider cell cell is timer inter-frequency inter-frequency dBm. measurement starts, if no this parameter, you need the After is not to or inter-RAT neighboring physical unit rate of the hard handover. To set is is used the successthe UE does not perform the interThis parameter handover prevent the the configured, quantities to is performedlongUE following factors: the moving speed of when inter-frequency - BOTH:both you need to considercell must of the state this parameter, inter-frequency measurement target the cell frequencyexpires, performing the handover and timer orradius. inter-frequency and this the cell inter-RAT measurement UE the be satisfied whenmoving to unavailable and following factors: of 3GPP (compressed mode) due when RSCP the TS reselection. For services, speed thethe is used For PS domain details, referaddition, measurement is when the Inter-Frequency judgement.Valid stopped. In to that meet the thethe measurement target cells intercell radius. measurement of is deactivated, 25.331 protocol. the quantity for if any. The as compressed mode measurement chooses when Ec/No is used For PS domain services, the RNC sends the handover requirements. timer is not to be frequency measurement, value 0 indicates thatquantity for interthe PERIODICAL_REPORTING Mode.smaller can as the measurementthe parameter mode Setting the value of this compressed signaling to activate (default value): enabled. measurement, the RNC sends the Recommended valueimpact of the compressed frequency reduce the long-time tomeasurement, if the and start inter-frequency prevent the long This parameter is used compressed mode BOTH(PERIODICAL_REPORTING Mode), signaling toevent 2D when the measured value mode on the servingthe In this case, UE reports activate cell. inter-frequency measurement state CPICH_RSCP(EVENT_TRIGGER Mode) the and start inter-frequency ofmode might be however, the compressed this parameter. is smaller than the value measurement, if (compressed mode) due to the measured value UE reports event 2D when unavailable stoppedUE moving at theresult the UE cannot For the earlier and as a speed that meet the of 5 km/h, measurement of the target cellsparameter. it is is smaller than that value of this For the to trigger inter-frequency handover. be set recommended the this parameter handover requirements. speed of 5 km/h, it is For the UE for the UE moving at handover, call moving coverage-based inter-frequency thesmaller of -100 dBm; value of at the Setting the this parameter speed can recommended that this parameter drops may to stop inter-frequencythis set to -17 occur. Threshold is recommended that be 50 km/h, it to stop inter-frequency compressed reduce the UE moving at the of the of 50 km/h, Threshold long-time impact dB; for the be set to -97 dBm;speed UE of measurement with measurementcase, parameter for mode on the serving cell. Inparameter be set this quantity measurementdomain non-HSPA the with measurement quantity it is recommended that this km/h,services.of RSCP at PS speed of 120 movingfor the compressed mode might be the domain non-HSPA services. it is however, PS the UE moving at the speed of Ec/No for to -14 dB; for that this parameter be set to -93 The inter-frequency measurement UE RSCP recommended and as a result the stopcannot stopped earlierrecommended that this Ec/No The km/h,(namely, compressed mode stop 120 inter-frequency measurement stop threshold it is dBm. inter-frequency handover. trigger threshold (namely, compressed mode stop parameter be set to -12 dB. are moving at threshold) is one of the key parameters in the For the cell in whichthe key parameters in the threshold) is one of the UEs For the cell in which the UEs are This beat inter-frequency handover policy. moving set various speeds,handover policy. target Threshold of signal quality of the This be set inter-frequency this parameter should various speeds, this parameter should UEs in parameter for triggering inter-frequency drop affects the proportion of call to -95 dBm. Through emulation, thethe UEs in frequency Through emulation, the call drop parameter modethe proportion of the to -14 it is affectsfor system supports at the When dB. checked,active status of a cell and intercompressed low rate remains mode active status of a cell and measurement. for the UEs moving at the compressed rate of the detectmoving To set ratesuccess low whenUEs parameter remains km/h the this function. frequency neighboring hard handover. is the speed of 120 This parameter isof when thishandover. To set to the success rate used hard consider theis speed dBm. km/h need set measurement this parameter, you the to parameter to -95 of 120 you 2C. controldB. the event need to consider the on this parameter, the moving speed of to -14 2D and 2F are the compressedthe UE following factors:triggered when the signal Events factors: moving mode The event 2C is2F are thespeed of the UE and following Events 2D and compressed and and the switches. If you is above mode cell radius. starttheof stoptarget frequency want to start the quality radius.switches. If you want to start the this the cell stop startPS domain services, whenthe threshold for For and is used compressed mode earlier, set RSCP is used threshold. mode earlier, set the threshold for Forthe measurement quantity for interPS domain services, when Ec/No compressed as event 2D larger; if you want tofor inter-the pingas the2D larger; if you want to reduce the the measurement quantity reduce event effect of starting and stopping the frequency measurement, the RNC sends pingpong frequencyto stop the compressed mode the pong effect of starting and stopping the and signaling measurement, the RNC sends compressedstop theset the difference between signaling to mode, set the difference between compressed mode, measurement,mode and the inter-frequency compressed if the UE events 2D and 2F larger. the inter-frequencylarger. eventsthe signalswhen the measured value is reports event 2F measurement, if the UE When 2D and 2F at the entrance to an reports event 2F when the measured value is larger than the value change too fast to elevator or a subway of this parameter. larger than and value of this parameter. mode Events 2D the 2F are the compressed perform2D and 2F are the compressed mode start Events handover, you should want the start and stop switches. If and set this start the compressed mode earlier you want to start the start and stop switches. If you the threshold for to compressed mode inter-frequency and interparameterswitch forearlier, set the threshold for Cell-level optimally to -90 set compressed modeyou want to reduce the pingearlier, dBm. eventhandover. if RAT 2D larger; if you want to reduce the event effect of starting and stopping the pingpong 2D larger; measuring inter-frequency INTERFREQ: starting pong effect of only setand stopping the compressed mode, inter-frequency handover. cells and performing the difference between compressed mode, set the difference between events 2D and 2F larger. INTERRAT: only measuring GSM cells and eventsthe signals at the entrance to an When 2D and 2F larger. performing inter-RAT handover . elevator or a subway change too fast to SIMINTERFREQRAT: measuring both interperform handover, you should start the frequency and inter-RAT cells, performing compressed modeinter-RAT handover inter-frequency or earlier and set this parameter to the type of thedBm.that first meets according optimally to -85 cell the handover decision condition. The parameter decides the handover for each cell when the inter-frequency and inter-RAT cells coexist.
ADD UCELLMBDRINTERFREQ(Optional)
ADD UCELLSELRESEL(Optional)
ADD UCELLMBDRINTERFREQ(Optional)
SET UOPERATORSHARINGMODE(Optional)
SET UOPERATORSHARINGMODE(Optional)
ADD UCELLMBDRINTERRAT(Optional)
ADD UCELLMBDRINTERRAT(Optional)
parameters, the UE the handoverinformed set various speeds, this need not be fails, be the same cell when parameter should and through following algorithms can bebe updated to -14 dB. Through emulation, the call drop that the signaling but the cell need flexibly only remains lower for the UEscell-oriented rate when the addition, for the moving at the developed. In handover decision is performed in the RNC. The disadvantageneed not be set speed of 120 km/h when this parameter is algorithm parameters, the UE of the periodical report dB.through signaling butlargecell needof to -14 mode is that it requires the amount be informed signalingonly when the handover on the airis If the cell and macro cell, it indicates that micro updated is a increases the load decision interface andthis cell. To enable the traffic of cells exist in the signaling processing. performed in for RNC. The disadvantage As for the impact onof the micro cells, the absorption function mode is that it requires the periodical report network performance,the two report modes have both advantages the compressed mode start threshold should and large amount of signaling and increases be disadvantages.the stop threshold be set lower, set higher and interface and for signaling load on the air Currently, the traditional Threshold threshold for event periodical report mode is used.2D/2F be set that is, the to stop inter-RAT measurement with processing. measurement quantity of Ec/No for CS domain higher the using is on network performance,the This parameter CPICH RSCP. As for by impact the relative threshold of cell services. iswhether uplink indicates that the of If the cell a micro cell, it MBDR algorithm for judging modes have both advantages and two report The inter-RAT measurement stopaccording to default value should be modified RSCP inter frequency is in overload state. It disadvantages. Currently, the traditional threshold (namely, compressed cell the link estimate mode is used. mode stop represents the percentage of the periodical report result. threshold) control threshold parameters in the Events 2D is one of thethe compressed mode admission and 2F are key of uplink. The This parameter is usedis, the earlier uplink inter-RAT handover policy. This parameter start and stop switches.to increasecell isof smaller this parameter When the time inter-freqency center of theIt UEs inconfigured affects algorithm of inter thefrequency proportion of located in to reselection. is not goes into MBDR thethetrigger inter-RAT measurement Threshold mode activefrequency information, when its value isinter-frequency measurement detailed compressed theWhen cell status of a cellthan and coverage or overload state. 255. For loadRSCP for CS withsuccess rate of quantity of is higherTo set refermeasurement the hard handover. to is set uplink cell admission control the product of TS 25.304. quantity3GPP to BOTH, Ec/No serves as the the domain services. need to consider the this parameter, you decision standard for events 2DRSCP is used and 2F. If than threshold and this parameter, and is lower you For CS domain services, whenthe UE and the following factors: the speed of threshold, want to start the compressed mode earlier, set thethe measurement quantity for inter-RAT as uplink cell admission control cell threshold for event 2D inter frequency is in the radius. uplink MBDR algorithm of larger; ifsignaling to measurement, the RNC sends the you want to For CS the ping-pong effect of startingis used reduce domain services, when start and overloadcompressed mode andEc/Nointer-RAT activate state. as the measurement quantity for set the interstopping the compressed mode,the event 2D measurement, if the UE reports frequency between measurement, the RNC sends differencemeasuredevents is smaller than the 2D and 2F larger. when the to stop the value the This parameter 2F are the inter-RAT signaling compressed inter-RAT Events 2D and specifies whether mode and value of this the UEmeasurement, if the UE parameter. handover of start and stop switches, that is, the inter-frequency among different operators measurement start the compressed mode If you want to 2F when the measured value is is allowed. reports event compressed mode start and stop the inter-RAT threshold for event 2D larger. earlier, set the value of this parameter. larger than the switches. Because thresholdservice types may Otherwise, set the differentindicates that micro for event 2D If the different macro cell, it on the signal haveparameter specifies whether ping-pong This cell is a want to reduce smaller; if you requirements the intra-RAT cells exist in the cell. To enable the operators this qualityof starting UE inter-RAT the compressed handover ofdifferent among different traffic effect and function of the micro cells, the and stopping handover absorption be used, the inter-RAT policies to is allowed.the difference between events 2D mode, set mode start threshold should be compressed start or stop thresholds are measurement andhigher and the stop threshold be set lower, set 2F larger. distinguished by CS, PS, to be maintained In mostthe thresholdwant and signaling set that is, cases, UEs be services. network. for event 2D/2Fthreshold within a 3G Thus, the higher by using CPICH RSCP. start If you want to start the compressed mode ofthe cell is a micro cell, it indicates that the MBDR switch threshold for event 2D larger; If the inter-RAT measurement is set smaller if earlier, set the inter-frequency measurement. than that of the default value shouldthe ping-pong effect of to be modified according you want to reducetriggering of the interThis facilitates the the link and stopping the compressed mode, starting estimate result. scenarios where no frequency handover. For compressed mode Events 2D and 2F are the set the difference between events 2D and 2F inter-frequency neighboring cells or where start and larger. stop switches. When the cell is inter-frequency coverage isfrequency the located in the center of the not ample, inter-RAT or the inter-frequency measurement coverage measurement start threshold should be set relatively larger so as to serves as the quantity is set to BOTH, Ec/No facilitate the triggering of inter-RAT measurement.2F. If you Thus, decision standard inter-RAT measurement with Threshold to stop for events 2D and call drops reduce. want to start the compressed mode CS domain measurement quantity of RSCP for earlier, set This parameter is the relative threshold want to the threshold for event 2D larger; if you of cell services. whether downlink MBDR algorithm for judging reduce the ping-pong effect of starting is used and For CS RAT is in overload state. It represents of inter domain services, when RSCP stopping the compressed mode, set the as the measurement quantity for inter-RAT the percentage of the cell admission control difference betweenRNC sends and signaling to 2D the 2F measurement, the events smaller thislarger. threshold of downlink. The deactivate is, the earliermode andMBDR parameter compressed downlink stop interRAT measurement, if the UE reports the event algorithm of inter RAT goes into overload 2F when the cell load is value is larger than the state. When measured higher than the product value of thiscell admission control threshold of downlink parameter. and this parameter, and is lower than the downlink cell admission control threshold, downlink MBDR algorithm of inter RAT is in overload state.
SET UINTERRATHOCOV(Optional) SET UINTERRATHONCOV(Optional) ADD UCELLINTERRATHOCOV(Optional) ADD UCELLINTERRATHONCOV(Optional) ADD UCELLMBDRINTERRAT(Optional)
SET USMLC(Optional)
ADD UCELLMBDRINTERRAT(Optional)
SET USMLC(Optional)
SET UINTERRATHOCOV(Optional) ADD UCELLINTERRATHOCOV(Optional) SET UINTERRATHOCOV(Optional) SET UINTERRATHONCOV(Optional) ADD UCELLINTERRATHOCOV(Optional) ADD UCELLINTERRATHONCOV(Optional)
ADD UCELLMBDRINTERRAT(Optional)
degree; and the stop threshold be set lower, set higher In which, -In cells where theinter-RATmoving speed of Threshold threshold for event 2D/2F be result that is, the to stop averagemeasurementset Mother_RAT indicates the measurement with UEs isGSM RSSI; comparatively big measurement quantity higher medium, there isRSCP. of the by using CPICHofaEc/No for HSDPA shadow fading square the inter-RATthat the services. If the cell is micro cell, it indicates Tother_RATaindicates error, so the handover recommended measurement stopaccording to The inter-RAT value be inter-RAT RSCP default value should decision threshold; of modified measurement layercompressed mode stop threshold (namely, 3 (CIO)coefficients is offset the Individual Offset filter indicates the 3; Celllink estimate result. -Inthe inter-RAT cell; the compressed mode threshold) and the are key parameters in of Events 2D is one ofaverage moving speed the of cells where 2F the UEs maximumswitches.of attempts cellperform inter-RATstop numbercomparatively is start is high, the hysteresis. the to small H representsthere is policy. Hysteresis can The and handover a When shadowwrong center oferror, so handovers. This parametersquare the frequency affects caused located fadingdecisionsthe proportion of the reduce in thetrigger inter-RAT measurement non-coverage-based inter-RAT the signal Threshold to valuemode activeby recommended specifies the maximum number UEs in compressed of inter-RATstatus of a coverage or the inter-frequency measurement jitters. This measurement quantity of RSCP for parameter withand the success3rate of the hard handover. measurement layerGSMto coefficients as2. filter cell sensitivity to BOTH, Ec/No serves is the quantity services. The of attemptsset of a RNC mobile phone is -102 for the inter-RAT HSDPA is parameter, you perform consider To setso standard non-coverage-based interthis after a for events 2D and 2F. If not need to decision the outdoor reception level shouldyou dBm, handovers For following factors: the speed of the UE used non-HSDPA services, thelower than failure. Thewhen RSCP is and want handover-90 dBm, considering aattempts to start the be the measurement quantity mode earlier, set RAT parameter specifies whetherinter-RAT handover margin as cell radius. compressed for the interThis dB for compensation of fast fading, want to the you of 3threshold for event 2D larger; ifhave 5 dBto should involve the targetsendsthat signaling measurement, the RNC cells the GSMnot the RAT handover, for example,of starting foras Forcompensation of whenhandover dB and reduce the ping-pong the Ec/No 2 used effect to is for HSPA services, mode andthe conditions. been tried but satisfyslow fading,start inter-RAT activate compressed when the RNC cannot network, is performed for mode, set the 2 dB measurement quantity stopping the compressed inter-frequency compensation of the UE reports the event 2D and measurement, if interference noise,the meet the accuracy RNC sends and signaling to measurement, theof ambient noise.2F larger. differencemeasuredevents is smaller than the between value 2D the for compensation requirements of when the calls for the LCS. This parameter emergencyand 2F aremode and the interstop the compressed the Events 2D parameter. inter-RAT The values of inter-RAT handover decision value of this enables emergencyand stopobtain policy. To frequency vary with calls if switches, that measurement start the compressedreports of thresholds measurement, tothe UE the LCS is, If you wantaccuracy in a handoversystem. to start the significant handthe measured value mode stop eventUEswhen over only to the GSM cells with is and the inter-RAT threshold different 2D larger have 2F thecompressed mode start larger. earlier, set than quality, you can set for event types may the value of this parameter. switches. Because thresholdservice 2D high the inter-RAT Otherwise, set the differentindicates that micro If the cell is a requirements on the signal cell, it for event have different macroto reduce the ping-pong handover decision threshold to a smaller; if you want To enable the traffic Timer length this inter-RATfor example -85 cells exist in for cell. qualityof starting andinter-RAT the compressed and different stopping handover comparatively high value, measurement. effectinter-RAT measurement starts, ifthe interAfter to be used, of the micro cells, no absorption function the inter-RAT policies dBm. set the difference between events 2D mode, RAT handoverstart or stop thresholds are compressed mode start threshold should be measurement is performed when this timer andhigher the inter-RATthreshold be inter-RAT This 2F larger.byspecifiesmeasurement islower, times out, and CS, PS, and signaling set parameterthe stop the type of set distinguished UEs want to be maintained In mostthethat is performed when the RNC cases, handoverInthreshold for event 2D/2F be set is stopped. that is,length for inter-RAT measurement. services. addition, the compressed mode Timer ameet the accuracy requirements of the within 3G if any; If the value start threshold cannot by using CPICHcompressed you can deactivated,network. Thus, thestarts,mode interhigherwant to start the RSCP. is 0, If youinter-RAT measurement is set if no After inter-RAT measurement ofthethat the inter-RAT measurementsmaller emergencythe for cell, it indicates that the isif infer handover thresholdLCS. If thecell is a micro the for when thistimer earlier, set calls performed event 2D larger; RAT that of the is timer than value should be modified according to inter-frequency measurement. not started. inter-RAT measurement is default to reduce the ping-pong effect of you want the the triggering of the intertimes out, This facilitates result. To link estimate you need to the set this parameter,thecompressed mode is starting andaddition, the scenarios consider stopped. In stopping For compressed mode, frequency handover. the compressed mode where the following if 2F If the factors: Events 2D andany;are value is 2D and no set the difference between events0, where 2F deactivated, inter-frequency aims to prevent that you can This parameter neighboring cells or the start and the inter-RAT When the cell is larger. stop switches.measurement timer is infer that inter-frequency coveragenotnot ample, the handover conditions are isfrequency the located in the center of the met and not started. inter-RAT or the inter-frequency long time when compressed mode is kept for threshold should coverage measurement start a measurement To set relatively larger you need to consider parameter, be set this set to move so is moving in a low the UE is factors: or as to facilitate the quantitydoes not BOTH, Ec/No serves as the the followinginter-RAT measurement. Thus, triggering ofservice quality is 2D and 2F. If you speed. The decision standard inter-RAT measurement with events adversely Thisdrops to stop the Threshold reduce. for to prevent capacity call parameter aims available that earlier, set affectedstart the compressed mode the totalare want to and quantity ofnot met for HSDPA handover conditions measurement compressed mode is kept for RSCP and decreases if the event 2D for a longyou want to the thresholdmode is kept larger; if time when compressed for services. a long does not moveeffect of starting a low reducetime.ping-pong when movingis used as the UE the services, or is RSCP in and For HSDPA Most inter-RAT handovers is adversely stopping theservice qualitymode, set the speed. The compressed can be finished the measurement quantity for inter-RAT within 60and differences. the total availableand signaling to affected between events 2D capacity measurement, the RNC sends the 2F larger. As for the impactcompressed performance, for decreases if the on network and stop interdeactivate compressed modemode is kept If the InterRATMeasTime is excessively low, a long time. RAT measurement, ifinter-RAT handovers. If the UE cannot finish the UE reports the event Most inter-RAT handovers can be finished the 2F when the measured value is larger than InterRATMeasTime is excessively high, it within 60 s. parameter. value of this improve the service quality. In cannotthe impact on network performance, As for help actualInterRATMeasTime is excessively to If the networks, statistics can be made low, obtain the delay for ainter-RAT handovers. If the UE cannot finish successful inter-RAT handover so as to get a proper value of it InterRATMeasTime is excessively high, InterRATMeasTime that satisfiesquality. In cannot help improve the service most UEs. actual networks, statistics can be made to obtain the delay for a successful inter-RAT handover so as to get a proper value of InterRATMeasTime that satisfies most UEs.
SET UNCELLDETECTSWITCH(Optional)
SET UINTERRATHONCOV(Optional) ADD UCELLINTERRATHONCOV(Optional) SET UINTERRATHOCOV(Optional) ADD UCELLINTERRATHOCOV(Optional) ADD UCELLMBDRINTERRAT(Optional) SET UINTERRATHOCOV(Optional) SET UINTERRATHONCOV(Optional) ADD UCELLINTERRATHOCOV(Optional) ADD UCELLINTERRATHONCOV(Optional)
ADD UCELLMBDRINTERRAT(Optional)
to -14 dB. iswill be slower. of fast that threshold the handovers compensation of 3 The reason triggering event fading, 5 dB UE. dB for a macro cell, handover. that is that event 3A cannot jitters.cell is the inter-RAT it indicates To micro If the determines The InterPeriodReportInterval is adjusted for compensation a GSM mobile phonefor -102 of slow fading, change fromhandoverTo enablerate, traffic event-triggered mode to BSIC The sensitivity ofconfigured GSM2 dB is cells exist to the interference noise, and improve the of according in this cell. success the the 2 dB RSSI compensation and cannot reattempt if thenot periodical function reception level should dBm, so thecell wherethe micro cells, the outdoor absorptionmode ofof the event 3A is of compensation ambient noise. measurement compressed mode sequence. forthe GSM -90 dBm, unless this cellmargin handoverthan be decoded correctly a can be lower must currentconsidering GSM be compressed modefails, threshold should RSSI triggered attempt According to the start configured by the The dBevent 3A again. handover decision values of trigger for compensation of fast cannot lower, of 3higher andinter-RATthresholdfading, 5 dB set The reason with the handoverbe set To stop UE. is that event 3A measurement compressed mode sequence, thresholds varytheof slow fading, 2report mode The is, the to event-triggered modepolicy. for compensation inter-RAT measurement with Thresholdmeasurement of eight GSMbe setcan that advantage of event-triggered dB for threshold only to the change from stop to the RSSI hand over for event 2D/2F cells with have UEs is that signaling CPICH RSCP. for PS domain compensation quantity of thereattempt if and interference noise, measurement 480 ms, so Ec/No reduced the higher by using transmission RSSI and periodical mode can set the is be finished in ofand cannot inter-RAT 2 dB high quality, you of ambient noise. signal the load isshared. cell, indicates that for compensation16By it cells can be the non-HSDPAaservices. comparing the can If the cellisdecisionfails, unless this cell finished handover measurementmicro GSM of handover attempt threshold to a decision quality event 3A the current frequency and to The values ofshould betohandover RSCP inter-RAT measurement protocol, not default between again. modified according trigger ms. According in 1000value inter-RAT the stop comparatively high value,ping-pong effectTo for example -85 inter-RAT (namely,event-triggered report mode thresholdsfrequency,the neighboring cells exist, threshold 32 inter-RAT the link estimatewith thehandover policy. in The advantage of compressed mode stop more than vary result. dBm. UEs hand preventedto the GSM cells The the handover is over only parameters in with have signaling2F are the compressed mode threshold) is one of the keyto some extent.the Events 2D and transmission is can be and is the sothat InterPeriodReportIntervalreduced set to disadvantage of can setWhen thethe signal high quality, you event-triggered report is 16. inter-RATifhandover policy. inter-RAT mode is start ms stop switches.GSM cells cell the load neighboring the 2000andis shared. By comparing exceeds that parameter the current frequency and handover decision threshold toonce and the This the in the centerimpact frequency signaling locatedbetween affects the proportion of of the on a quality event is reported only the Uu This parameter has inter-RAT measurement Threshold changed to periodical mode.-85 a cannot compressedvalue,ping-pong effectthe be to trigger the active status comparatively highismode for example If in UEs in thefrequency, too short and the of coverage or the inter-frequency measurement inter-RAT interval flow.measurement quantity of RSCP for PS If withand the success rate of the hardis triggered handover setisthe periodical some extent. The dBm. isfails,topreventedRNC serves as the cell handovertoo high, the to may handover. quantity non-HSDPA services.report have BOTH, Ec/No the frequency is Inter-RAT handover failure due to domain theof Threshold parameter,events 2D and 2F. If you only by standard for youFor the consider is To set thisprocessing signaling. If cell-oriented decision internal timer. need when RSCP disadvantage of event-triggered report mode burden domain HSDPA services,to times of in the For following factors: the When thetheinterval PS physicalstart the compressed mode earlier, set algorithm parameters, each time theand cell the long, channelreportedspeed of the signal want to event is failure. only once bestinterthat too the as handover failures due to physical the network cannot quantity for and detect UE is used radius.measurement measurement Inter-RAT ping-pong hysteresis. if you want to is updated,the inter-frequency cell the threshold forwhich maylarger;mode. If the Inter-RAT changed to periodical the inter-RAT cannot in the event 2D delay changebe time,exceeds RNC sends the will RAT measurement,be services,accordingly. the the channelthe ping-pong effect threshold,Ec/No is parameters shouldCS domainreport is triggered For PS UE in thus cause call is when and reduceadomain the periodical drops. UE When failurethe fails, HSPA updated mode handover to activate compressedhandedof and penalty state. of starting over signalingthe measurement quantity for interbe turnedthe compressed mode, set try and into And used a the as stopping internal timer. For the no the from by2G network to a 3G network, UE reports only inter-RAT measurement, if the cell-oriented start Inter-Rat handover will bethe RNCpreventthe -Periodicalmeasurement, takentothe best UE report3Aevents time until penalty mode frequencyparameters, each2D and sends cell difference2D when Hysteresis 2F larger. system increase the measured value is algorithm between the event to stop thethe GSM cell reported by finishes. handover between the 2G network When the and 2F are the inter-RAT signaling quality of compressed mode and Events 2D the inter-frequency measurement ping-pong ping-pong timer. parameter. is updated, the value of this smaller than Inter-RAThigher than the inter-RAT event 2D Alsotheis parameterand stop switches, that by see the inter-frequency be the period specified the measurement start the updated accordingly.is, andUEa 3G to start measurement, if mode parameters network indomain is handed UE If you event the + the measured When want shouldCShysteresis, itstartvaluestop over PenaltyTimeForInterRatPhyChFail.time, the is absoluteUE in2F when compressed and reports threshold the inter-RAT compressed penalty starts the mode 2D larger. this parameter.threshold earlier, 2G network to the fornetwork, the set the During this from than the value athe event the delayatrigger timer. If of 3G parameter.GSM quality of types may larger switches. Because different for event previous periodicalthresholdservice 2D UE -Periodical report3Areport will be changed to Otherwise, set themode it indicates that the system increase requirement throughout micro cell event is athe of Hysteresis theprevent If the differentreport. the GSM cell reported by cell, have cell 3A requirements on to ping-pong signal the satisfies macroto this parameter network When the you want If reduce the 2G is 0,the smaller; if in this ping-pong quality cell.between handover durationwillhandover the enable the event 2D of the timer,inter-RAT starts the cells existhigher than theping-pong handover qualityof starting and stopping the compressed systemand not start inthe system specified by the UE is different To inter-RAT traffic effect 3Gfunction after micro cells, and the to handoverof the the time-out.the inter-RAT network hysteresis, starts absorption be policiestimer. used,+thethe periodit eventsthe inter-RAT punish set the difference between time, the absolute threshold mode, this parameter. of which threshold can are 2D The GSM cellsstart start the BSIC should be compressed mode If the quality of measurement Duringstop penalty the be or the thresholds GSM delay trigger timer. report will be andhigher and the stop thresholdchanged to 2F larger. previous use comparatively shorter delay decoded periodical PS, andthroughout lower, set satisfies by CS, be set distinguishedthe requirement signaling the cell event 3A report. want to be maintained In mosttimethreshold If this parameter beThe UEs the is, the to achieve a event 2D/2F is 0,the trigger cases, timer, for higher priority.the that services.of the durationwill not start the ping-pong handover the system starts set withincells of which the BSIC isstart threshold Thus, the systemby using CPICHcompressed verified use GSM a 3G network.after the time-out. higherwant to start the RSCP. not mode If you inter-RAT measurement is set smaller inter-RAT handover ofthe cell is a longer delay trigger time the the punish timer. micro cell, it indicates thatto comparatively If GSM the of which for event 2D be earlier, setcells threshold the BSIC can larger; if The that of the inter-frequency measurement. than achievevalue shouldthe ping-pong effect BSIC. default ato reduce be and shorter the of you want use comparatively decode delay to decoded lower priority modified according This facilitates the triggering of according to If the handover fails, reattempt the interthe link estimate result. compressed mode, startingtime to achieve a higher priority. The trigger and stopping For scenarios where no frequency handover. the compressed mode the the 2D of whichare the period report. use Events difference between events 2D and 2F set inter-RAT measurement cells or verified GSM cells and 2F the BSIC is not where inter-frequency neighboring the cell is The and stop switches. When report to start advantage of thedelay trigger time mode is larger. comparatively longer periodicalample, the inter-frequency coverage isfrequency that it can lower priority and decode the BSIC. repeatedly perform the located in the center of the not handover achieve a measurement start threshold should inter-RAT or same cell when the handover fails, retry on the thefails, reattempt according to coverage measurement If the handover inter-frequencyfacilitate be set relatively largeralgorithms can be the andinter-RAT measurement period report.the following so as to quantity is set to BOTH, Ec/No serves as the that the inter-RAT measurement. Thus, triggering of flexibly developed.the events 2D reportcell- is In periodical and 2F. If decision standard inter-RAT measurement you The drops reduce. for addition, for the mode Threshold to stop call advantage of parameters, the RNC with oriented algorithm wantitto start the compressed mode PS domain that can repeatedly perform for earlier, measurement quantity ofwhen the handover set RSCP updates the same cell 2D larger; if you want to performing the thresholdservices. when the handover fails, retry on the parameters non-HSDPA for event internal the ping-pong algorithms can be handover decision and the system reduce domain non-HSDPA of startingwhen effect services, and and that the For PSnot to following UEs of the parameter needs developed. In addition, for the cellinform the stopping used as the measurement quantity for flexiblyis the compressed mode, set the RSCP through signaling messages after the change algorithm parameters,and 2F larger. difference measurement, the RNC sends the between events 2D the RNC oriented inter-RAT The disadvantage of the periodical handovers. parameters when performing updates the signalingthatdeactivate compressed mode and to it requires large amount of mode is handover decision and the system internal stop inter-RAT measurement, if the UE reports signaling andinform the UEsload on the air needs not2F increases the of the parameter to the eventand when the measured value is interface for signaling processing. change through signaling messages after the larger than the value of this mode and the Both modesThe disadvantage of the periodical (the periodical parameter. handovers. event report mode) have advantages of mode is that it requires large amount and disadvantages. Currently, the traditionalair signaling and increases the load on the periodicaland for mode is most commonly interface report signaling processing. used.modes (the periodical mode and the Both event report mode) have advantages and disadvantages. Currently, the traditional periodical report mode is most commonly used.
ADD UCELLSELRESEL(Optional)
ADD UCELLMBDRINTERRAT(Optional)
EXP LOG(Optional)
STR ETHOAMLOOPTST(Optional)
ADD UCELLINTRAFREQHO(Optional)
ADD UCELLMEAS(Optional)
corresponding to the guarantee signal quality with QoS of basic service. The parameter affects the triggering of eventRSCP absolute This parameter specifies the 1F. the filtering Accordingis used 3GPP TS the emergency to the to trigger Event 1F of event 1F in the25.331, threshold algorithm, This parameter is thevalue cellthreshold of cell of thehandover. If the best isSHO the active set measurement relativecalculated using blind of corresponding to the guarantee signal strength for judging whether uplink MBDR algorithm of the following 1F, which meansrepresents this reports eventformula, where k The parameter with the QoS of basic service. Itthat the active interis veryis in overload then therepresents the parameter: poor quality, state. cell RAT triggering of event 1F.blind affects the * Fn - 1 + a * Mn percentage of the cell as the last attempt admission control Fn = parameter is used to handovera) used to triggerincrease time of is This (1 - of uplink. The Event 1F is triggered smaller this parameter the emergency threshold drop. a = (1/2)(k/2) before call inter-RAT reselection.best not configured when blind handover. If the It is cell of the active set is, the earlier uplink MBDR algorithm of inter Here, The emergency For detailed information, refer blind handover is a its value is into overload means that the active reports event 1F, which state. Whenspecial RAT goes 255. filtered measurement result cell Fn: the updated occasion TS 25.304. on-sitethe blind load to higher than requires then uplink cell 3GPP that the product of measurements cell-is the poor quality, is thevery oldof the pilot strength and quality of Fn measurement result on 1: scope filtered as the last attempt handover is triggered measurement result admission control thresholdwhere the blind Mn: the cell at the location and this the best latest received before call drop.is lower than the uplink cell parameter, and from physical layer measurements function handover is triggered.handover isthis The emergency blind Generally, aMBDRwill admission set to 1, this means L3 filtering to Whennotis control threshold, uplink special need a be started, soon-site measurements occasion of inter RAT the parameter is set algorithm that requires is in overload state. the not lowest value by be thethe applied. the default, indicating quality of that on input measurement value to L3 filter has pilot strength The scope ofis not triggered. and blind handover the location where the blind the best cell at L1 filter, where the impact of been filtered by value is, the more The largeris triggered. Generally, thiseasily the Time span the set the command is executed. before handover is almost eliminated. So the L3 function fast fading be triggered. the time span are to event not can 1F be started, so the parameter the set The logs generated within The smalleris set to need should apply smooth filtering to filtering the more difficultly the event 1F can value is, value by default, indicating that the be exported. the lowest shadow fading and small amount of remaining be triggered. For the definition of event 1F, blind handover is not triggered. fast to 3GPP the filtered measurement thus referfading,the TS 25.331. the more easily the The largerwhethervalue is, of the actual set the intra-frequency Indicating impact the network performance: value the reflect on varying As for cancan be triggered. The smaller the set event 1F Interval for sending packets thetest Ethernet the measurement value, and is, to more easily The higher thecontrol information more reliable threshold provide should be value is, the more difficultly the event 1F can OAM loopthrough the system information. delivered can value for event judgement. measurementbe triggered. The lower the event 1F be triggered. For the network performance: Generally impact should deliver event 1F, As for the the cell on definition ofthe intrathreshold is, the more difficult the event 1F can refer to 3GPP value TS 25.331. frequency theIn real of this parameter, the the larger measurement control information. be triggered. As for the impact on situations, the the higher network and threshold When the intra-frequency measurement stronger the smoothing effectperformance: can be adjusted according to the handover the Theanti-fast-fading (the preconfiguration of the control information capability, but the lower the higher the threshold is, the more easily the strategy and network coverage.lower the event 1F can be triggered. The measurement control) is delivered in the signal tracing capability, the greater the threshold is,UE can start the intra-frequency system, the call drops. If the the event 1F possibility of the more difficult value of this can be triggered. too small, unnecessary soft measurement and send the measurement parameter is In real situations, the threshold can beimmediately after it enters CELL_DCH report adjusted ping-pong to the handover handover or the according handover may strategy and network coverage. be more state, occur.and the soft handover can quickly finished by the UE to avoid impact on Note parameter specifies has intra-frequency This that this parameter the great call drops when the UE is in the soft handover reference The the overall the quantity. It defines thearea.so measurement period of of Intra-frequency Identifying performance thethe handover, can preconfiguration of measurement to report you should be quantity for the adjusting this is cautious when UE control measurement load balance algorithm. When the cell load enable the UE in the 1A, 1B, 1C, and 1Dto parameter. PCPICH TX handover area which eventthe cell events soft power can be high, 1x. For handovers more quickly to implement soft adopt relative thresholds, theto enable users in measurement periodically reduced in rate. With the decrease the call drop order impact on the quantity does not to be switched over to have great connected mode function, the UEs in theother preconfiguration For event 1F which adopts single threshold easily, cells morevalues. thus reducing the local cell signaling threshold, the soft handoversquantity state perform measurement in a absolute load. probability. If the CN delivers the RAB higher be set based on the reality of the cell. If should assignment before athe center of the coverage the cell is located in soft handover is complete,maindelay of UEaffects signal quality area, the the factor that service setup may increase. For details, refer to the 3GPP TS is intra-frequency interference. In this case, 25.331 protocol.is recommended. If the cell is CPICH_EC/NO located at the border of the coverage intra- the When it is checked, system supports area, main factor that affects detect function. the frequency neighboring signal quality is distance between the cell and the in HoSwitch DETSET_RPRT_SWITCH switch base station. In SETcase, CPICH_RSCP is recommended. in this CORRMALGOSWITCH can also start the intra-frequency neighboring detect function. Either switch is checked, the RNC starts the intra-frequency neighboring detect function.
SET UNCELLDETECTSWITCH(Optional)
ADD UIURGCONN(Mandatory)
SET USMLC(Mandatory)
SET USMLC(Mandatory)
The valueandthis parameter consistent, and event theset thresholdrelative thresholds the 1A of Thehysteresis1B should be is set to 5 dB, the can determines when arearelative thresholddirectly and event You relative values for event 1A affect the the can curbdifferentratio. For the CDMAfor SHOcan SHO you of theand involved to reduce the ping- the the ping-pong effect through (SHO ratioyou can ratio of by setting ahandover (the event theUE it 1B in soft higher relative 1B, 1A and event the UEcoefficient, and system, thecurb filtering involved in soft time-to-trigger, L3 the active set iswiselyIn 2) is ratio). So and the soft handover at for event threshold number offor event 1B should be ratio.ensure pong effectcells inreachand lower that least threshold should specific applications, if the handover achieve smooth SHOs. to hysteresis. In some Itthe recommended to set chosen applications, 30% to 40% approximately 35%. is relative thresholds for general to 1A. smooth handover. Based ondetermines results, ping-pong of this parameter consistent, and be simulation the Therelativeeffect cannotlittlecurbed by dB to 7 the value impact threshold higher 5 adjusting event 1A relative on network set to(5 dB, the As for the and 1B should be isperformance: the threshold for when area and values a eventthe CDMA the hysteresisthe ping-pong effect through the SHOvalue of this parameter determinesevent dB) can curb deployment, and to reduce you during UE SHO ratio. soft 1A and (the The youthe site involved in Forahandoverthe ratio 1B, of can ratio of by setting higherand system, the curb itfiltering increase. But the threshold whenthe the active set is atin relative time-to-trigger, L3 the ratio. The higher 2) SHO areafor event SHOUEcoefficient,leastthe is and the users involved soft number ofshould reachand lower that ensure threshold must be higher than 3 dB tofor event handover cells in specific to 40% to cell the threshold is, the more easily the targetavoid hysteresis. In some1B is30% applications, ifset threshold approximately 35%. It recommended to 1A. ping-pong handover.be curbed by adjusting smooth handover. Based on simulation results, the relative threshold a harder the (5 drops, ping-pong effect cannotlittle higher calldB to 7 joins the active set, the the for the relative on network performance: As hysteresis values relative thresholds for when the the ratio of the event 1Ato 5 dB, the set and You duringimpact threshold isinvolved in soft can set the larger of different for UEdeterminesevent dB) value site involved in soft handoverthe The youthe UE deployment, andhigher relative this parameter a the pingRelative can curbthe 1B toevent 1A.of forward the the use ratio of threshold ofmore reduceto reduce the event 1B, 1A when it by setting handover andbuttheSHO ratio. The higher(the threshold is, event users increase. But the SHO areafor eventthe active set is ratio. the2) is and the number of is. The 1B and thresholdleast pong effectcellsthelower the lowerdB toforIn threshold must in soft handover at is, the that event resourcesis,andbe higher than 3 targetavoid threshold threshold the approximately 35%. easily the thresholds for to general applications,It iscell joins the active set. 1A. ping-pongthemorethe recommendedcellset more the active set, the harder the call drops, difficult handover. relative target the relative threshold a little higher (5 dB to 7 joins 1A and 1B should be consistent, and the event thecommunication quality and the for As forthe set differentnetwork performance: Thuscan the ratio of relative involved in soft Yoularger impact on the UEand to reduce the thresholds the during of this parameter effect through dB) can handoverping-pong determines the you 1A site deployment, The valueand the cannot reduce the pingsmooth curbbut the 1B to be guaranteed. event event users increase. But the handover whenthe filtering the The of forward threshold is, L3 SHO ratio. use higher the time-to-trigger, the more coefficient, and SHO area and the soft handover ratio. In pong effect and higher than 3 dB to avoid resourcesmust belower the threshold is, the threshold is, The specific applications, if hysteresis.is.the morethe relative target cell the threshold In some easily the thresholds for general more theapplications, cell curbed calladjusting the ping-pong handover. ping-pong effect target be joins the active set. joins difficult the cannotharder the by drops, event the set different relative thresholds for 1A active set, the quality and the and 1B should Thuscan communication be consistent, event Youhysteresisratio of the event 1A andinand values for the larger the the ping-pong effect through the you can handover cannot UE guaranteed.soft curb event 1B to be involved pingsmooth can curbthe more reduce the forward event 1A andbut it by setting a higher relative 1B, you handover is, L3 filtering the use of and time-to-trigger, the soft handover ratio. In coefficient, pong effect and lower the lower that for the threshold is. The specific applications, if the resourcesfor event 1B and threshold is, event hysteresis. In some the relative thresholds for general applications, 1A. difficult the cannotcell curbed by adjusting more ping-pong effect target be joins the active set. event the impact on network performance: As for 1A and 1B should event 1A and and Thus the communication be consistent, event the hysteresisthe ping-pong effect through the values for quality and the you can curb this cannot be The you can curb it by settingguaranteed. value of smooth handoverparameter determines the 1B, a higher relative time-to-trigger, the filtering coefficient, andthe L3 SHO areafor event SHO ratio. The higherevent threshold and 1B and lower that for if the hysteresis. In some specific applications, threshold is, the more easily the target cell 1A. ping-pong effect cannot be curbed by drops, joins the active set, the harder the calladjusting As for the impact on network performance: hysteresisratio of the event 1A andin soft values for UE involved the larger thethis parameter determinesevent The you can curb itof the event 1B. the Relative threshold by setting a higher relative 1B, value of handover is, but the more the The of forward SHO areafor event SHO ratio. use higherevent and the 1B and lower that for the threshold is. The lower the threshold is, the resourcesis, the more easily the target cell threshold 1A. difficult the target cell joins the active set. more the active set, the harder the call drops, joins the impact on network performance: As for Thus the communication quality and the soft the larger thethis parameter determines the The value of ratio of the UE involved in smooth handover cannot be guaranteed. handover is, but the more the The of forward SHO area and the SHO ratio. use higher the resourcesis, the more easilythreshold is, the threshold is. The lower the the target cell more the active set, the cell joins the active set. joins difficult the target harder the call drops, Thus the communication quality and the soft the larger the ratio of the UE involved in smooth handover cannot be guaranteed. handover is, but the more the use of forward resources is. The lower the threshold is, the more difficult the target cell joins the active set. Thus the communication quality and the smooth handover cannot be guaranteed. CN flow control timer (long). If the OVERLOAD message is not received in this period, the traffic volume will be increased by a degree. Interval for executing the scheduled subtask. If the time mode is set to "DAILY_C", "WEEKLY_C", or "MONTHLY_C", you should Automatic switchover interval. This parameter set thisto be set only when "OMU automatic needs parameter. switchover switch" is set to "ON". The minimum automatic switchover interval is 30 days and the maximum automatic switchover interval is 1024 days.
SET UIUTIMERANDNUM(Optional)
ADD SUBTSK(Optional)
SET ASWPARA(Mandatory) EXP LOG(Optional) ADD SNTPSRVINFO(Mandatory) DLD LICENSE(Mandatory) ULD LICENSE(Mandatory)
ADD IPPATH(Mandatory)
The local IP address must be the configured IP address (including the IP address and port address of the interface board).
LOP VCL(Mandatory)
ADD DEVIP(Mandatory)
ADD IPOAPVC(Mandatory)
Local IP address
ADD ETHIP(Mandatory)
ADD ICMPGUARD(Mandatory)
ADD VLANID(Mandatory)
ADD ETHTRKIP(Mandatory)
SET VCLLOP(Optional)
ADD PPPLNK(Optional)
ADD MPGRP(Optional)
ADD ETHIP(Mandatory)
ADD ETHTRKIP(Mandatory)
ADD UNODEBIP(Mandatory)
Whether to bind the logical port Number of the logical port for the NodeB operation and maintenance channel in the IP transmission mode
ADD UNODEBIP(Mandatory)
ADD IPMUX(Optional)
IP packet multiplex index Slot number of the BSC6900 interface board interworking with NodeB when the NodeB operation and maintenance channel works in the IP transmission mode Subrack number of the BSC6900 interface board interworking with NodeB when the NodeB operation and maintenance channel works in the IP transmission mode
ADD UNODEBIP(Mandatory)
ADD UNODEBIP(Mandatory)
ADD UNODEB(Mandatory)
Indicating whether the Iub allocated supports Indicating whether the UE interface with IP hybrid transport. be allowed to initiate Access Class 0 can access to the radio network. The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of Indicating whether the UE allocated with this parameter, refer to 3GPP TSto initiate Access Class 10 can be allowed 25.331. access to the radio network.The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of Indicating whether the UE allocated with this parameter, refer to 3GPP TSto initiate Access Class 11 can be allowed 25.331. access to the radio network.The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of Indicating whether the UE allocated with this parameter, refer to 3GPP TSto initiate Access Class 12 can be allowed 25.331. access to the radio network. The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of Indicating whether the UE allocated with this parameter, refer to 3GPP TSto initiate Access Class 13 can be allowed 25.331. access to the radio network.The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this parameter, refer to 3GPP TS 25.331.
ADD UCELLACCESSSTRICT(Optional)
ADD UCELLACCESSSTRICT(Optional)
ADD UCELLACCESSSTRICT(Optional)
ADD UCELLACCESSSTRICT(Optional)
ADD UCELLACCESSSTRICT(Optional)
ADD UCELLACCESSSTRICT(Optional)
Indicating whether the UE allocated with Access Class 14 can be allowed to initiate access to the radio network.The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of Indicating whether the UE allocated with this parameter, refer to 3GPP TSto initiate Access Class 15 can be allowed 25.331. access to the radio network. The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of Indicating whether the UE allocated with this parameter, referbe 3GPP TS 25.331. Access Class 1 can to allowed to initiate access to the radio network.The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of Indicating whether the UE allocated with this parameter, referbe 3GPP TS 25.331. Access Class 2 can to allowed to initiate access to the radio network. The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of Indicating whether the UE allocated with this parameter, referbe 3GPP TS 25.331. Access Class 3 can to allowed to initiate access to the radio network. The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of Indicating whether the UE allocated with this parameter, referbe 3GPP TS 25.331. Access Class 4 can to allowed to initiate access to the radio network. The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of Indicating whether the UE allocated with this parameter, referbe 3GPP TS 25.331. Access Class 5 can to allowed to initiate access to the radio network. The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of Indicating whether the UE allocated with this parameter, referbe 3GPP TS 25.331. Access Class 6 can to allowed to initiate access to the radio network. The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of Indicating whether the UE allocated with this parameter, referbe 3GPP TS 25.331. Access Class 7 can to allowed to initiate access to the radio network.The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of Indicating whether the UE allocated with this parameter, referbe 3GPP TS 25.331. Access Class 8 can to allowed to initiate access to the radio network.The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of Indicating whether the UE allocated with this parameter, referbe 3GPP TS 25.331. Access Class 9 can to allowed to initiate access to the radio network.The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this parameter, refer to 3GPP TS 25.331.
ADD UCELLACCESSSTRICT(Optional)
ADD UCELLACCESSSTRICT(Optional)
ADD UCELLACCESSSTRICT(Optional)
ADD UCELLACCESSSTRICT(Optional)
ADD UCELLACCESSSTRICT(Optional)
ADD UCELLACCESSSTRICT(Optional)
ADD UCELLACCESSSTRICT(Optional)
ADD UCELLACCESSSTRICT(Optional)
ADD UCELLACCESSSTRICT(Optional)
ADD UCELLACCESSSTRICT(Optional)
ADD RSCGRP(Mandatory)
ADD UNODEBLMTPARA(Optional)
This parameter specifies whether the MAC-hs window size is fixed. - If this parameter is set to TRUE, the MAC-hs window size is fixed. - If this parameter is set to FALSE, the MAC-hs window size is flexible. primary operator flag. YES indicates to activate the license of the primary operator, and NO indicates to activate the license of the secondary operator.
SET LICENSE(Optional)
ADD IPMUX(Mandatory)
Whether it is QOSPATH
ADD ADJNODE(Mandatory)
Whether to indicate it is the root node when the transport type is ATM or ATM_IP
SET UACALGO(Optional)
Whether to support the FRA (E1/T1 frame Wheninterface board) is faulty, the RNC relay the Iu interface gradually restricts cell access in Bar mode. When the Iu interface is restored, the RNC gradually enables cell access in Not Bar mode. This parameter defines the interval between Type of working in Bar mode and in Not Bar the cell the adjacent node mode. In this way, the location update procedure can be distributed to a specified time period and the risk due to congestion is reduced. Meaning: Number of RABs selected in one DL traffic release. One RAB represents one service of a single user.
ADD UNODEBOLC(Optional)
ADD UNODEBOLC(Optional)
SET USTATETIMER(Optional)
A timer to Iu CS Release protection Maximum traffic rate for restriction in the case of congestion on the IU interface. This parameter is valid only when "Board Class" is "XPU".
SET FCSW(Optional)
SET FCSW(Optional)
SET USTATETIMER(Optional)
A timer to Iu PS Release protection Indicating whether to support congestion control over Iur interface of the Neighboring RNC.usage threshold for Iur downlink flow CPU control. When the average CPU usage of sliding windows reaches or exceeds the threshold, flow control is triggered on the Iur downlink. Packet queue usage threshold for Iur downlink flow control. When the average packet queue usage of sliding windows reaches or exceeds the threshold, flow control is triggered on the Iur downlink. CPU usage threshold for recovery from Iur downlink flow control. When the average CPU usage of sliding windows is lower than the threshold, flow control on the Iur downlink is stopped. Packet queue usage threshold for recovery from Iur downlink flow control. When the average packet queue usage of sliding windows is lower than the threshold, flow control on the Iur downlink is stopped.
ADD UNRNC(Optional)
SET FCCPUTHD(Optional)
SET FCMSGQTHD(Optional)
SET FCCPUTHD(Optional)
SET FCMSGQTHD(Optional)
SET FCSW(Optional)
ADD UNRNC(Mandatory)
Indicates whether to config neighbouring RNC's DSP threshold for Iur-g interface CPU usage index. control. When the average CPU usage of sliding windows reaches or exceeds the threshold, resource auditing control is triggered. Packet queue usage threshold for Iur-g interface. When the average packet queue usage of sliding windows reaches or exceeds the threshold, Iur-g interface flow control is triggered. CPU usage threshold for recovery from Iur-g interface control. When the average CPU usage of sliding windows is lower than the threshold, Iur-g interface control is recovery Packet queue usage threshold for stopped. from Iur-g interface. When the average packet queue usage of sliding windows is lower than the threshold, Iur-g interface control is stopped.
SET FCCPUTHD(Optional)
SET FCMSGQTHD(Optional)
SET FCCPUTHD(Optional)
SET FCMSGQTHD(Optional)
SET FCSW(Optional)
ADD UNRNC(Optional)
Indicates whether to support Hsdpa over Iur interface of the Neighboring RNC.
ADD UNRNC(Optional)
Indicates whether to support Hsupa over Iur interface of the Neighboring RNC. flow CPU usage threshold for Iur uplink control. When the average CPU usage of sliding windows reaches or exceeds the threshold, flow control is triggered on the Iur uplink. queue usage threshold for Iur uplink Packet flow control. When the average packet queue usage of sliding windows reaches or exceeds the threshold, flow control is triggered on the Iur uplink. threshold for recovery from Iur CPU usage uplink flow control. When the average CPU usage of RNC state is affected by than the How the sliding windows is lower the Iu threshold, flow control over on the Iur uplink is interface service state. stopped. is NONE, threshold state is If the value Packet queue usage the RNC for recovery independent of the control. When the average from Iur uplink flow Iu interface state(faulty or recovery). packet queue usage of sliding windows is If the valuetheIUCS, the RNC state is over on lower than is threshold, flow control considered tois stopped. the Iur uplink be faulty when Iu CS interface is faulty. If the value is IUPS, the RNC state is considered to be faulty when Iu PS interface is faulty. Whether to control the traffic on the Iur uplink If the value is IUCS_IUPS, the RNC state is considered to be faulty when IU CS and IU PS interface are faulty. When IU CS or IU PS interface recovers, the RNC state is considered to be normal.
SET FCCPUTHD(Optional)
SET FCMSGQTHD(Optional)
SET FCCPUTHD(Optional)
SET FCMSGQTHD(Optional)
SET FCSW(Optional)
ADD URNCPOOL(Optional)
SET OPT(Mandatory)
SET OPT(Mandatory)
SET OPT(Optional)
SET OPT(Optional)
Expected receiving value of J0. J0 byte, also called the trace byte of the regenerator section on the optical port (RTIM), is one of the optical port interconnection parameters. The BSC receives the peer J0 byte continuously.
SET OPT(Mandatory)
Byte display format of J0 Sending value of J0. J0 byte, also called the trace byte of the regenerator section on the optical port (RTIM), is one of the optical port Sending type of parameters that is interconnection J0 continuously transmitted to the peer end. This parameter enables the peer end to check whether it is connected to the local end continuously.
SET OPT(Optional)
SET OPT(Optional)
SET OPT(Optional)
J0 type
SET OPT(Mandatory)
SET OPT(Mandatory)
SET OPT(Optional)
SET OPT(Optional)
Expected receiving type of J1 J1 byte, also Expected receiving value of J1. called the trace byte of the high-order path on the optical port, is one of the optical port interconnection parameters. The local end continuously receives the peer J1 byte.
SET OPT(Mandatory)
Byte display format of J1 Sending value of J1. J1 byte, also called the trace byte of the high-order path on the optical Sending type of J1 port, is one of the optical port interconnection parameters transmitted to the peer end continuously. This parameter enables the peer end to check whether it is connected to the local end continuously.
SET OPT(Optional)
SET OPT(Optional)
SET OPT(Optional)
J1 type
SET COPTLNK(Optional)
SET COPTLNK(Optional)
SET COPTLNK(Optional)
Byte length of J2
SET COPTLNK(Optional)
Expected receiving value of J2 A zero or a space used to fill in the J byte of the optical port based on the J byte of the peer Sending value of J bytes are inconsistent, an equipment. If the J2 alarm related to J byte mismatch will be reported and the negotiation of the optical port may fail, thus leading to deterioration of the services.
SET COPTLNK(Optional)
SET MSP(Optional)
Determines whether the last three bits of K2 indicates the single end and the dual end
ADD SAALLNK(Optional)
SET UKPIALMTHD(Optional)
The period of KPI alarm check,it's the times of KPI report period.
SET UKPIALMTHD(Optional)
ADD ULASNAMAP(Mandatory) ADD UCZ(Mandatory) ADD UEXT3GCELL(Mandatory) ADD UEXT2GCELL(Mandatory) ADD UCELLSETUP(Mandatory) ADD ULAC(Mandatory) ADD UCELLQUICKSETUP(Mandatory) ADD URAC(Mandatory) ADD USAC(Mandatory)
Identifying a location area code for a PLMN of GSM-MAP type. It is defined by the operator. For detailed information of this parameter, refer to 3GPP TS 23.003. Aggregation mode. When this parameter is set to static aggregation, the LACP protocol is activated; otherwise, the LACP protocol is deactivated.
ADD ETHTRK(Mandatory)
ADD GPS(Mandatory)
Longitude of the GPS receiver antenna Delay statistics period. This parameter indicates the period to collect the statistics Longitude of the GPS link transmission delay. information about the receiver antenna Note that the unitadjustment suspension Number of delay of this parameter is 100 milliseconds. The actual specifies the delay periods. This parameter delay statistics period is the value of this parameter multiplied by 100 statistics periods in which the bandwidth is not milliseconds. the bandwidth adjustment adjusted when function of the logical port is triggered due to the change of the link transmission delay. This parameter can be used to control the rate of the bandwidth adjustment at the logical port. Bandwidth reduction delay threshold. This parameter is used to trigger the function of bandwidth reduction at the logical port when the link delay exceeds the value of this parameter.
ADD GPS(Mandatory)
ADD IPLOGICPORT(Optional)
ADD IPLOGICPORT(Optional)
ADD IPLOGICPORT(Optional)
ADD IPLOGICPORT(Optional)
ADD IPLOGICPORT(Optional)
Average delay increase filtering index This parameter specifies which choice the load balancing DRD algorithm will be applied. - Power: Power(Downlink none-HSDPA power Link type is used for DCH services, and downlink HSDPA guarantee power is used for HSDPA services) will be applied to the load balancing Length of smoothing filter window of intraDRD algorithm. frequency load User number(Downlink R99 - UserNumber: balancing (LDB). equivalent user number is used for DCH services, and downlink HSDPA user number is used for HSDPA services) will be applied to the the load balancing DRD algorithm.
ADD VPCLCX(Mandatory)
ADD UCELLDRD(Optional)
SET UDRD(Optional)
balancing DRD algorithm will be applied. - Power: Power(Downlink none-HSDPA power is used for DCH services, and downlink HSDPA guarantee power is used for HSDPA services) will be applied to the load balancing DRD algorithm. - UserNumber: User number(Downlink R99 equivalent user number is used for DCH services, and downlink HSDPA user number is This parameter specifies the downlink load used for HSDPA services) will be applied to threshold to trigger load balancing DRD for the the load balancing DRD algorithm. will DCH services. The load balancing DRD probably be triggered only when the downlink remanent non Hspecifies the downlink load This parameter power or remanent R99 equivalentto trigger load of the cell is less than threshold user number balancing DRD for this threshold. The load balancing DRD will DCH services. probably be triggered only when the downlink remanent non Hspecifies the downlink load This parameter power or remanent R99 equivalentto trigger load of the cell is less than threshold user number balancing DRD for this threshold. specifies the threshold of will This parameter HSDPA services. The load balancing DRD remanent load offset only when the downlink probably be triggeredbetween the current cell and the target cell guarantee power or DRD is balancing remanent HSDPA when load downlink load This parameter specifies the when the applied forHSDPA DCH users. number of the cell is remanent to triggeruser Only threshold load offset reaches this threshold load balancing DRD for remanent less than this threshold. the threshold of will This parameter specifies balancing DRD HSDPA services. The load can a neighboring cell be selectedcurrent cell as remanent load offset only when the a probably be triggeredbetween the downlink candidate DRD cell for DCH users.(If Load is and the target cell when load balancing remanent HSDPA guarantee power or DRD balancefor HSDPA users. Only additional applied DRD choice is Power, when cell is remanent should also be satisfied, the the total condition HSDPA user number of threshold remanent this threshold. offset reaches this that is less than loaddifference between the current powerneighboring cell be selected as a remain can a cell and target cell should be less than Load candidate DRD cell for HSDPA users.(If Load Balance DRD choice is Power, additional balance DRD Total Power Protect Threshold; if Load balance DRD choice is UserNumber, condition should also be satisfied, that is total additional condition is not needed.) current power remain difference between the cell and target cell should be less than Load Balance DRD Total Power Protectthe load This parameter specifies whether Threshold; if Load balance algorithm willis UserNumber, DRD choice be applied for balancing DRD specifies whether the load This parameter additional condition is not needed.) DCH services. algorithm will be applied for balancing DRD - ON: services. balancing DRD algorithm will DCH The load be applied. - ON: The load balancing DRD algorithm will - OFF: The load balancing DRD algorithm will be applied.(If cell-level DRD parameters are not be applied. status of cell level Load configured, the balance DRD switch for DCH should also be considered.) specifies whether the load This parameter - OFF: The loadalgorithm will be algorithm will balancing DRD applied for balancing DRD specifies whether the load This parameter not be applied. HSDPA services. balancing DRD algorithm will be applied for - ON: The load balancing DRD algorithm will HSDPA services. This parameter specifies the threshold of the be applied. - ON: The load balancing DRD algorithm will downlink remanent total power difference - OFF: The load balancing DRD algorithm will be applied.(Ifcurrent cell and parameters are between the cell-level DRD the target cell not be applied. status of cell level Load configured,balancing DRD is applied and the when load the balance DRD switch choice is Power. Only load balancing DRD for HSDPA should also be considered.) when the downlink remanent total power - OFF: The load balancing threshold can a will difference is less than this DRD algorithm not be applied. be selected as a candidate neighboring cell DRD cell. (Another condition is that remanent load offset reaches the threshold defined by the parameter of Load balance DRD offset for DCH or Load balance DRD offset for HSDPA.)
ADD UCELLDRD(Optional)
SET UDRD(Optional)
ADD UCELLDRD(Optional)
SET UDRD(Optional)
SET UDRD(Optional)
SET UDRD(Optional)
ADD UCELLDRD(Optional)
SET UDRD(Optional)
ADD UCELLDRD(Optional)
SET UDRD(Optional)
SET UDRD(Optional)
SET ULDCALGOPARA(Optional)
renegotiation of uncontrollable real-time service QoS, and CS/PS inter-RAT handover. If NODEB_CREDIT_LDR_SWITCH, LCG_CREDIT_LDR_SWITCH and LC_CREDIT_LDR_SWITCH are selected, the corresponding algorithms are enabled; otherwise, disabled. Recommended value: NODEB_CREDIT_LDR_SWITCH: disabled. LCG_CREDIT_LDR_SWITCH: disabled. LC_CREDIT_LDR_SWITCH: disabled. FALSE means not considering the code priority during the code reshuffling. TRUE Inquiring load of GSMofcodeLDR the during is Identifying the period cell when execution.the means considering the the priority switch on. reshuffling. If the parameter is TRUE, the When basic congestion occurs, execution of code LDR can dynamically reduce the cell load. The codes with high priority are reserved during the lower the parameter good for the code code reshuffling. It isvalue is, the more frequently the LDRsharing,is executed, which resource dynamic action which is a function decreases the load quickly. If the parameter If congestion is triggered by multiple resources used for the HSDPA service. Codeas excessively low, at the same time, the value is credit usage difference action may such resourceand code an LDRthreshold. Inter-frequency handover before the previous overlap the previous one is triggered when the congestion of resources specified in this difference of the resource usage first priority. result is displayed in LDM. The higher current parameter is processed with the of thethe cell and that of tois,target cell of greater than parameter value processing likely this IUBLDR refers the the more is LDR resources action If congestion be triggered this threshold. bandwidth.byIf the parameter problem can is prevented. multiple trigged by Iub and code at the same time, the CREDITLDR refers such as excessively high, the LDR action may value is credit to processing of LDR action trigged by credit. congestion of resources specified in this be executed lower the action CODELDRis rarely, failing to the of LDRload parameter refers to processing fourth priority. processed with timely. trigged by code. UULDR refers to processing IUBLDR refers to processing of LDR action The LDR algorithm aims Uu. of LDR by Iub trigged by to slowly reduce the trigged actioncontrol the load below the refers cell load and bandwidth. CREDITLDR to processing of LDR each LDR action takes a admission threshold, action trigged by credit. CODELDRexample the inter-RAT load action period (for refers to processing of LDR If congestion is triggered refers to processing by multiple trigged by needs UULDR of about 5 sresources handover code. a delay at the same time, the if the such as credit and code Uu. of LDR action trigged needed), and there is a by compressed mode is congestion of resources specified in this delay for the LDM module responds to the load parameter is processed with the second decreasing (the delay is about 3 s when the L3 priority. filter coefficient to processing of LDR action IUBLDR refers is set to 6), so the parameter If congestion betriggered by multiple resources value should is higher than 8s. trigged by Iub bandwidth. CREDITLDR refers such as credit and code at the same time, the to processing of LDR action trigged by credit. congestion of resources specified in this CODELDRis processed with the of LDR action parameter refers to processing third priority. trigged by code. UULDR refers to processing IUBLDR refers to processing of LDR action of LDR by Iub trigged by Uu. trigged action bandwidth. CREDITLDR refers to processing of LDR action trigged by credit. CODELDR refers to processing of LDR action trigged by code. UULDR refers to processing of LDR action trigged by Uu.
ADD UEXT2GCELL(Mandatory)
ADD UCELLLDR(Optional)
ADD UCELLLDR(Optional)
SET ULDCALGOPARA(Optional)
SET ULDCALGOPARA(Optional)
SET ULDCALGOPARA(Optional)
SET ULDCALGOPARA(Optional)
ADD LOADEQ(Mandatory)
ADD ADJMAP(Mandatory)
ADD ADJMAP(Mandatory)
ADD ADJMAP(Mandatory)
EXP LOG(Optional)
COL LOG(Optional)
SET ALMML(Mandatory)
ADD ETHMD(Optional)
ADD VPCLCX(Optional)
Silver user load EQ index used by the current adjacent node Logical function type of the board OAM:Operation And Maintenance Process UCP:All the UCP subsystems areidentifies a The local entity number uniquely configured as CPUS to act as the control plane local entity. processing subsystems for UMTS BSC RUCP:Subsystem 0 of RUCP is configured as the MPU subsystem to act as the resource management subsystem. The other seven Level of the log configured as CPUS to act as subsystems are the control plane processing subsystems for UMTS BSC UUP:UMTS BSC User plane Process ATM:AEUa/ATM ATM over Log level to be collected. E1/T1/J1 interface,AOUa/ATM ATM over channelized Optical STM-1/OC-3 interface,AOUc/ATM ATM over channelized Optical STM-1/OC-3 interface,UOIa/ATM ATM over Unchannelized alarm mask switch. interface,UOIc/ATM ATM Optical STM-1/OC-3 over Unchannelized Optical STM-1/OC-3 interface IP:GOUc/IP IP over GE Optical interface,GOUa/IP IP over GE Optical Class of the maintenance domain interface,PEUa/IP IP over E1/T1/J1 interface,FG2c/IP IP over FE/GE interface,FG2a/IP IP over FE/GE interface(not Fractional link number corresponding with the support GbIP),POUc/IP IP over channelized low endSTM-1/OC-3 interface,POUa/IP IP Optical port over channelized Optical STM-1/OC-3 interface,UOIa/IP IP over Unchannelized Optical STM-1/OC-3 interface SAU:Service Aware Uint
ADD PPPLNK(Optional)
ADD MPGRP(Optional)
SET LICALMTHD(Mandatory)
The occur threshold of 20258 alarm,you can set it from 90% to 99%
SET LICALMTHD(Mandatory)
ADD VPCLCX(Optional)
SET UCMCF(Mandatory)
SET UDCCC(Optional)
The recover thresholdrate decreases to thecan When the BE service of 20258 alarm,you set it from 90% to 99% UE, however, cannot DCCC threshold rate, the DL SF threshold to limit to FACH state SF limit perform state transition CM. When DL CM indicator example, the state transition because, for is TRUE, if the downlink spreading factor is lessare CS services. In this switch is OFF or there than or equal to this parameter value, the activelow for quite a long case, when traffic remains set quality IMA group number of the lowand CM function measurement is not allowed end port period, the service rate decreases to this rate should be deactivated.When DL SF limit CM and D2F state transition is not performed. The ind is parameters andactivated, the downlink timer TRUE, if CM is traffic volume spreading factor should befor the function of measurement parameters greater than this parameter value. low activity rate adjustment are the same as those in the D2F state transition process. The relative parameters can be set in command SET UUESTATETRANS and SET UUESTATETRANSTIMER.
SET ALMPORT(Optional)
Lower limit for triggering an alarm The loopback channel number when the port loopback mode is set to single channel local loopback Optical interface tributary numbering method. This parameter indicates the sequence of Link load sharing. Incorresponding to the of tributarieslinkan SDHthe M3UA link.number Signaling in mask the value, the This Initial bearing tag ofn)frame. 1s (represented by used for the M3UA link load determines the M3UA link set. It isset to either active mode or parameter number (2^n) of links for the load can be maximum is valid only when the working mode sharing. It standby mode. For details about the relevant sharing. For example, B0000 to load sharing. indicates that of the tag, see link the parameter "Traffic up set is bearersignaling thefor the set sharing, B0001 to onevalue, the number of 1s (represented by link is used load In the mode" of the "ADD M3LKS". two links are and B1000 indicate that up to n) determines the maximum number (2^n) of used for the load sharing. For example, B0000 links for the load sharing. The additional links are not used for theone link is used forAND indicates that up to load sharing. The the operation between this value and " signaling load sharing, B0001 and B1000 indicate that route two links are used for the load to 0. up to mask " in the N7DPC is equal sharing. The additional links are not used for the load sharing. The AND operation between this value and " signaling route mask " in the "ADD N7DPC" is equal to 0.
SET E1T1LOP(Optional)
SET OPT(Optional)
ADD M3LNK(Optional)
ADD MTP3LKS(Optional)
ADD M3LKS(Optional)
LOP VCL(Mandatory)
SET VCLLOP(Mandatory)
SET UMBSCCRRM(Optional)
If the switch is ON, the load difference between 3G cell and target 2G cell will be considered during the load-base handover. If the switch is OFF, the load difference between 3G cell and 2G cell will not be considered.
ADD PPPLNK(Mandatory)
Local IP address of PPP link. The IP address of the PPP link on the BSC side. The value of this parameter can include one or two conditions. Local used to concatenate the conditions, and "&" is IP address of the MP group the records are obtained when the two conditions are matched. Conditions are written in the format of "name : value". Local IP address "name" is the key of location information, "value" is the value of location information. Uniquely identifying a local cell. For detailed Both "name" and "value" are case sensitive. information of 1. If you need torefer to all the For example: this parameter, obtain 3GPP TS 25.401. alarms regarding the subrack 0, set lockeyinfo to "Subrack No : 0". For example: 2. If you need to obtain all the alarms regarding the slot 8 in subrack 0, set lockeyinfothe "Subrack Noaddress that : 8". Identifies to first local IP : 0&Slot No communicates with the peer end. When it is set to 0, it is invalid. This IP address must be first configured on the corresponding interface board. the second local IP address that Identifies communicates with the peer end. When it is set to 0, it is invalid. This IP address must be first configured on the corresponding interface board.
ADD MPGRP(Mandatory)
ADD SCTPLNK(Mandatory)
ADD SCTPLNK(Optional)
SET OPLOCK(Mandatory)
ADD SCTPLNK(Mandatory)
SET LODCTRL(Mandatory)
board start load control. CPU usage threshold for log flow control. When the average CPU usage of sliding windows reaches or exceeds the threshold, log flow control is triggered.
SET FCCPUTHD(Optional)
SET FCMSGQTHD(Optional)
Packet queue usage threshold for log flow control. When the average packet queue usage of sliding windows reaches or exceeds the threshold, log flow control is triggered.
ADD SCTPLNK(Mandatory)
Whether the SCTP is bound to a logical port. For details, see "ADD IPLOGICPORT". Logical port No. bound by the SCTP. For details, see the parameter "Logic port No." of the "ADD IPLOGICPORT". Logical port slot No. bound by the SCTP. For details, see the parameter "Slot No." of the "ADD IPLOGICPORT". CPU usage threshold for recovery from log flow control. When the average CPU usage of sliding windows is lower than the threshold, log flow control is triggered. Packet queue usage threshold for recovery from log flow control. When the average packet queue usage of smooth windows is lower than the threshold, log flow control is triggered.
ADD SCTPLNK(Mandatory)
ADD SCTPLNK(Mandatory)
SET FCCPUTHD(Optional)
SET FCMSGQTHD(Optional)
SET FCSW(Optional)
COL LOG(Mandatory)
ADD GPS(Mandatory)
ADD GPS(Mandatory)
SET E1T1(Optional)
SET E1T1LOP(Mandatory)
Loopback type
SET OPTLOP(Mandatory)
SET VCLLOP(Mandatory)
ADD IPLOGICPORT(Optional)
Number of suspension periods after the Loopback type bandwidth adjustment is performed based on the packet drop ratio. This parameter specifies the delay statistics periods in which the bandwidth is not adjusted when the bandwidth This parameter specifies the loopbackis adjustment function of the logical port type. triggered due to the change of the packet drop ratio. This parameter can be used to control the rate of the bandwidth adjustment at the logical port.
ADD IPPATH(Mandatory)
ADD VPCLCX(Optional)
ADD ATMLOGICPORT(Optional)
ADD IPLOGICPORT(Optional)
STR UNODEBBWRPT(Mandatory)
ADD IPPATH(Mandatory)
Type of logical port CPU usage threshold for location RRC load sharing. When the CPU usage reaches or exceeds the threshold, location RRC connection load sharing is triggered. Packet control threshold for location RRC load sharing. When the packet queue usage reaches or exceeds the threshold, location RRC connection load sharing is triggered.
SET SHARETHD(Optional)
SET SHARETHD(Optional)
SET SHARETHD(Optional)
CPU usage threshold for recovery from location RRC load sharing. When the CPU usage is lower than the threshold, location RRC connection loadthreshold for recovery Packet queue usage sharing is stopped. from location RRC load sharing. When the packet queue usage is lower than the threshold, location RRC connection load sharing is stopped.
SET SHARETHD(Optional)
ADD VPCLCX(Mandatory)
Slot number
ADD VPCLCX(Mandatory)
Subrack number
EXP LOG(Optional)
CMP TBLDATA(Optional)
LOD BRD(Optional)
Loading type
SET LOGLIMIT(Mandatory)
EXP LOG(Mandatory)
ADD VPCLCX(Optional)
ADD VPCLCX(Optional)
ADD VPCLCX(Mandatory)
SET SCTPSRVPORT(Optional)
SET UDTXDRXPARA(Optional)
SET UDTXDRXPARA(Optional)
SET UFRC(Optional)
SET UFRC(Optional) ADD ETHMA(Mandatory) ADD ETHMEP(Mandatory) PING MAC(Mandatory) TRC MAC(Mandatory)
ADD ETHMA(Mandatory)
Service mapping strategy switch. Number of the M3UA service listening port 1) MAP_HSUPA_TTI_2MS_SWITCH: When This parameter specifies the supported for the the switch is on, 2 ms TTI is DTX cycle at MAC layer when the MAC layer supports UL HSUPA. E-DCH inactivity. For details, period during 2) parameter specifies the refer to the 3GPP This TS 25.321E-DCH transmission is not activated. MAP_INTER_RAT_PS_IN_CHANLE_LIMIT_S which the protocol. WITCH: When the switch is on,be transmitted After this period, data can only the PS services are transmitted on the DCH during the on the E-DCH within the period specified by 2G-to-3G handover. Whenrefer switch 3GPPon, MacDtxCycle. For details, the to the is not the 25.321 protocol. be transmitted on suitable TS PS services can channels according to the algorithm parameter This parameter specifies the maximum size of configured for the RNC during the 2G-to-3G PDUs transmitted at the MAC layer when the handover. UE is in the CELL_FACH state in the L2 3) MAP_PS_BE_ON_E_FACH_SWITCH: Identifies switch is enhancedascenario.on, the PS BE services can When the maintenance group. Maintenance group: maintenance alliance be transmitted on the E-FACH. This parameteraspecifies the of the (MA), which is component maximum size of 4) PDUs transmitted at the MAC layer when the maintenance domain (MD). Maintenance MAP_PS_STREAM_ON_E_FACH_SWITCH: UE is in is an Ethernet orstate in the L2 of an domain the CELL_DCH a PS streaming When the switch is on, the component enhanced scenario. connectivity failure Ethernet can be transmitted on the E-FACH. services in which the management is performed. The maintenance 5) MAP_PS_STREAM_ON_HSDPA_SWITCH: domain is uniformlyon, a PS streaming service When the switch is managed by one ISP. One MD can be on the the link used thecarry a link is mappedtype of HS-DSCHor more Preferred divided into one if to DL maintenance group. type is SAAL-SCTP. or maximum rate of the when the bearer link service is greater than equal the current bearer link fails, it will be When to the HSDPA threshold for streaming services. automatically carried on the other type of 6) MAP_PS_STREAM_ON_HSUPA_SWITCH: bearer link. For detailed description of this When the switch to the 3GPPstreaming service parameter, refer is on, a PS TS 25.430. is mapped on the E-DCH if the UL maximum rate of the service is greater than or equal to the HSUPA threshold for streaming services. 7) Name of the MA MAP_SRB_6800_WHEN_RAB_ON_HSDSCH _SWITCH: When the switch is on, the signaling is transmitted at a rate of 6.8 kbit/s if all the downlink traffic is on the HSDPA channel.
ADD PPPLNK(Mandatory)
ADD MPGRP(Mandatory)
ADD ICMPGUARD(Mandatory)
Mask of the source IP network segment of the packet against the ICMP attack This parameter specifies the maximum allowed uplink TX power of a UE in the cell. When this Subnet masknot set to any value, the UE parameter is adopts the corresponding value of the current serving cell, added through the ADD UCELLSELRESEL command. Generally, this parameter is not set to any value. The maximum allowed uplink transmit power of a UE in the cell, which is related to the network planning. For detailed information, refer to 3GPP TS 25.304.
ADD UEXT3GCELL(Mandatory)
ADD UCELLSELRESEL(Optional)
ADD UEXT3GCELL(Optional)
This parameter indicates whether to configure the maximum TX power. Maximum coverage of the cell antenna. This is controlled by MTRLGY and valid when MET~0(metric system). This parameter specifies the maximum coverage of the cell antenna. This is controlled by MTRLGY and valid when IMP~1(British measurement). If the number of the association The maximum number of attempts to perform retransmissions exceeds this value, the inter-freq handovers parameter is deleted automatically. Thenumber This parameter specifies the maximum value must be greater than Path max retrans. of attempts for the RNC to perform inter-freq handover after inter-freq handover failure. The handover attempts should involve the cells that This parameter specifies the maximum number have not been tried but satisfy the handover of attempts for the RNC to perform inter-RAT conditions. after a cell-oriented measurementhandovers based DRD inter-RAT handover failure. The handover attempts should involve the cells that have not been tried but satisfy the handover conditions.
ADD USMLCCELL(Optional)
ADD USMLCCELL(Optional)
ADD SCTPLNK(Optional)
ADD UCELLMBDRINTERFREQ(Optional)
ADD UCELLMBDRINTERRAT(Optional)
ADD UTYPRABBASIC(Mandatory)
This parameter specifies the maximum bit rate of the typical service. This parameter denotes the rate of services. The typical services include 12.2 kbit/s, 64 kbit/s, 144 kbit/s, 384 kbit/s and so on. For detailed information of this parameter, refer to 3GPP TS 25.433.
ADD UCELLRLPWR(Mandatory)
ADD IPLOGICPORT(Optional)
SET UCTRLPLNSHAREPARA(Optional)
SET UCTRLPLNSHAREPARA(Optional)
ADD SAALLNK(Optional)
ADD UFACH(Optional)
SET URACHMEASUREPARA(Optional)
SET UHOCOMM(Optional)
Maximum numbers of incoming calls in one second when the load is lower than the forwarding threshold. When the CPU usage is This parameter specifies the maximum number Maximum bandwidth for dynamic adjustment lower thanthe active set. This parameter can of cells in the sharing out threshold and at the logical port and call numbers in each overloadthe balanceof incoming calls in one achieve threshold, Maximum numbers between the signal quality second reach theand the performance ofcall in the SHO area threshold, new arrival the second when the load exceeds the forwarding attemptsThe more cells out to other between system. will be the CPU usage set contains, threshold. Whenshared the activeis UMTS CPUS and none will be shared thethis UMTS larger macro diversity gain in user the sharing out threshold and overload obtains CPUS. in the SHO area, and the smaller the intrathreshold, and call number in one second frequency interference is. But in this case, the reaches the threshold, new arrival call user occupies resources of several UMTS attempts will be shared out to other cells, which increases none will be data to be processed CPUS andthe amount ofshared in this UMTS by the CPUS.system and lowers the system performance. To reduce intra-frequency interference, it is Maximum number of allowed retransmission recommended to suitably increase the number upon the timeout of the connection control of cells in the active sets for the hot-spot and timer (CCTMR). have highly complex signals. micro cells, which For the cell that provides high speed services, suitably decreasing the number of cells in the active set can reduce the consumption of system resources. This parameter determines the maximum number of links in the EDCH active set. When the RNC acts as the SRNC, the number of links in the EDCH active set for all the UEs Max common channel priority supported by under FACH.the RNC cannot exceed the parameter This parameter specifies the maximum value value. If the parameter value is too large, a lot of Ec/NO in the E-FACH Ec/N0 adjustment of resources on the RAN side will be occupied algorithm. The formula is y = x *over-multiple as the same data is transferred 0.5 24.5dB ("y" representsmacro diversity, thus affecting EDCH links in the actual value and "x" represents the GUI value). this parameter the system performance. If value is too small, insufficient combination gain can be achieved in macro diversity by the EDCH, which causes excessive retransmissions and affects the UE speed. This parameter specifies the maximum number of HARQ retransmissions of the MAC-es flow that carries this service.
ADD UTYPRABOLPC(Mandatory)
ADD UCELLCAC(Optional)
The parameter indicates the max user number the EFACH channel can supports.
ADD UFACH(Optional)
The offset between the FACH transmit power and PCPICH transmit power in a cell.
ADD IPMUX(Optional)
SET USMLC(Optional)
ADD UCELLCAC(Optional)
Maximum number of users supported by the HSDPA channel. The user in this parameter refers to the user with services on the HSDPA Maximum number ofof the number of RABs channel, regardless satellites whose ephemeris the HSDPA channel. Maximum can be when the A-GPS carried on number deliveredsupported by the Maximum method is used. of users exceed the HSDPA user number cannot this parameter HSUPA channel. The user in HSDPA capabilitywith services on the HSUPA refers to the user of the NodeB product, In practice, the value can the set based on the channel, regardless of be number of RABs cell type and the richness of the Maximum carried on the HSUPA channel. available HSDPA power and code resources. the HSUPA user number cannot exceed HSUPA capability of the NodeB product, In practice, the value can be set based on the cell type and the richness of the available HSUPA power and code resources. The value of this parameter cannot be less than the maximum PPPMUX sub-frame length Max allowed number of continuous invalid (MUXMAXSFL). This parameter can be measurement reports. For detailed information associated with the maximum segment length of this MP to control whether to segment the of the parameter, refer to 3GPP TS 25.433. multiplexed MP. To enable the PPPMUX, the number of sub-frames must be more than or equal to 2. The following condition must be met: wMuxMaxSfL <= ( wMuxMfl-8 )/2.
ADD UCELLCAC(Optional)
ADD PPPLNK(Optional)
ADD MPGRP(Optional)
SET PWDPOLICY(Optional)
Maximum number of retries when the user logs in parameter specifies the maximum number This of channelization codes supported by uplink DPDCH. The larger the value of this parameter, the more the available channelization codes of uplink DPDCH.
ADD UNODEBLMTPARA(Optional)
ADD SAALLNK(Optional)
SET ALMCAPACITY(Optional)
Maximum capacity for storing the alarm log If the number power path retransmissions Maximum TX of the of the PCPICH in a cell. exceeds this value, the be set based on the This parameter should parameter is deleted automatically. environment such as cell than actual system The value must be smaller Association max retrans. coverage (radius) and geographical environment, and the cell total power. When the ratio of soft handover areas keeps the same, the downlink coverage cannot be promoted by the increase of PCPICH power.
ADD SCTPLNK(Optional)
ADD UPCPICH(Optional)
ADD SAALLNK(Optional)
SET UQUEUEPREEMPT(Optional)
ADD PPPLNK(Optional)
Maximum data count in the poll period. It indicates the count of data packets (SD) allowed to be transmitted between the intervals of two Poll messages. The value ranges from 250 to 500 when interface type is set to NNI. The value queue time of users. When a user Maximum ranges from 25 to 50 when interface type is setcall, it joins the queue due to cell to UNI. initiates a PPPMUX sub-frame length. If the Maximum resource insufficiency. Thisthan this value, the PPP frame length is larger parameter defines the maximum length ofis performed. The value PPPMUX multiplexing time required for queuing of a user. If cell resourcesthan still of this parameter cannot be larger are the insufficientmultiplexed frame length fails. maximum after expiration, access wMuxMfl. To enable the PPPMUX, the number of subframes must be more than or equal to 2. The following condition must be met: wMuxMaxSfL <= ( wMuxMfl-8 )/2
ADD MPGRP(Optional)
ADD UCELLHSUPA(Optional)
Maximum length of the PPP multiplexing of the The parameter specifies the target value frame uplink load, which is decreased through HSUPA power control on the NodeB side. For details about this parameter, refer to 3GPP TS 25.433.
STR POSAVE(Optional)
TRC IPADDR(Optional)
Maximum TTL value of the sent TRACERT packet Summaximum UL transmit power for of all DL The of the maximum transmit power channels in a cell. For detailed information of background service in a specific cell. It is this parameter, refer to 3GPP TS 25.433. the based on the UL coverage requirement of background service designed by the network planning.For detailed informationconversational Maximum UL transmit power for of the related IE "Maximum allowed ULItTX based on the UL service in a specific cell. is power", refer to the 3GPP requirement of the conversational coverage TS 25.331. service designed by the network planning.For detailed information of the related for the The maximum UL transmit power IE "Maximum service in a specific cell.refer based interactive allowed UL TX power", It is to the 3GPP TS 25.331. requirement of the on the UL coverage interactive service designed by the network planning.For detailed informationthe the related Maximum UL transmit power for of streaming IE "Maximum allowed ULItTX based on the UL service in a specific cell. is power", refer to the 3GPP requirement of the streaming service coverage TS 25.331. designed by the network planning.For detailed information of the related IE "Maximum allowed UL TX power", refer to the 3GPP TS 25.331.
ADD UCELLCAC(Optional)
ADD UCELLCAC(Optional)
ADD UCELLCAC(Optional)
ADD UCELLCAC(Optional)
ADD UCELLLDR(Optional)
This parameter specifies the number of users selected in code reshuffling. Code reshuffling can be triggered only when the number of users on a code is no greater than the threshold. Code reshuffling has a big impact on the QoS. In addition, the reshuffled subscribers occupyMBDR(Measure-Based Priority identifier of two code resources during code reshuffling. Thus, the parameter should Directed Retry) cells. Priorityto aMBDR(Measure-Based Directed of comparatively low value. be set indicates that the MBDR cell priority is TRUE cells. Retry) validpriority cell-oriented measurement-based The in the that corresponds to the MBDR cell DRD algorithm, and the cell can be considered is valid only when the MBDRFlag parameter is as theTRUE. The lower the priority, the easier set to measurement object. FALSE indicates that for the MBDR cell to be delivered as the it is the MBDR cell priority is invalid. measurement object. For example, it is more possible for a MBDR cell of priority 1 than a cell of priority 2 to be delivered as the measurement object.
ADD IPRTBIND(Mandatory)
Detection index. The index is a unique value ranging from 0 to 31 if it is not specified. Activity factor of the MBMS service. Signals might be discontinuously transmitted because of the activation detection of conversational Local IPand source changes ofBFD service. service address for multi-hop data The activity factorof the RABas the ratio of When the priority is defined of MBMS signal transmission time to channel occupation services exceeds this threshold, reconfigure time. The activity factorsminimum power. The the MBMS power to the of the same transport channel might be each ratein UL and the basis MBMS service at different is set on DL. of two power levels. The power set for an MBMS service is determined according to cell load during the service access. In addition, the WCDMA MBMS general common channel FACH power of the MBMS service must be service downlink factor decreased as required in the duration of cell congestion. Some services with high priority, for example the disaster pre-alert, however, do Indicatingthe coverage CCH carries the MCCH not need whether the shrink caused by cell of theIn such a case, you can adjust the load. MBMS. service priority threshold to protect the services with high priority against the impact of the service access failure and the load control algorithm.
STR IPCHK(Mandatory)
SET UADMCTRL(Optional)
ADD TRMFACTOR(Optional)
ADD USCCPCHBASIC(Optional)
ADD UCELLLDR(Optional)
SET UMBMSALARMPARA(Mandatory)
A timer used to alarm for no mbms data for MBMS traffic. ON denotes enabling of the MBMS Iub transmission resource sharing function; OFF denotes disabling of the MBMS Iub transmission resource sharing function.
SET UMBMSSWITCH(Optional)
ADD UMBMSALARMSERVICE(Mandatory)
ADD UMBMSALARMSERVICE(Mandatory)
ADD UINTRAFREQNCELL(Optional)
ADD UCELLOLC(Optional)
MBMS service release is an extreme method in reducing the code of and recovering the mobile network cell load the RNC. system when the cell is overloaded and congested. The mechanism of the OLC is that an action is performed in each [OLC period] and some It is an indicator of MBMS neighboring cell. services are selected based on the action rules to perform this action. This parameter defines the maximum number of MBMS services released in executing downlink OLC service release.
SET UQUEUEPREEMPT(Optional)
ADD UMBMSALARMSERVICE(Mandatory)
SET UMBMSSWITCH(Mandatory)
This parameter specifies the uplink bit rate of Indicating whether in PTP mode. The CN does the MBMS service MBMS is supported. not assign the uplink rate to the MBMS service, but the MBMS service in PTP mode is in acknowledged mode and requires the uplink rate for RLC status reporting.transport mode of This parameter specifies the MBMS services. The point-to-multipoint (PTM), point-to-point (PTP), and enhanced PTM (ENHANCEDPTM) modes information semiMBMS SA ID. For detailed are static or of this static transport modes. 3GPPare relatively parameter, refer to the They 25.346. simple and have little impact on the MBMS service and the network performance. The dynamic mode (DYNAMIC) is complicated. In dynamic mode, transition between PTP and MBMS Service performed dynamically to PTM modes is Identity. balance the quality of service and the network resource utilization. The network periodically changes the transport mode based on the ON denotes enabling of the MBMS function; number of users and the the MBMS function. OFF denotes disabling ofstatus of neighboring cells. These activities have an impact on the reception of the MBMS service, and the MBMS user might experience service disruption when Theuser moves across of all operators cannot the total MBMS traffic the border between exceed the MBMS cell. Therefore, the dynamic PTP cell and PTM value in the license. mode has a relatively great impact on the MBMS service and the network performance. For details of this parameter, refer to the 3GPP TS 25.346.
ADD ATMTRF(Optional)
Maximum burst size (MBS) This parameter defines the adjustment coefficient of load value of 2G cell, which used when load value of 2G cell is compared to the load value of 3G cell.
SET UMBSCCRRM(Optional)
SET UMBSCCRRM(Optional)
This parameter defines the load difference threshold between 3G cell and 2G cell when CS service is distributed to 2G. If the load difference between 3G cell and target 2G cell exceeds this parameter the load difference This parameter defines value, then the loadbased balance of CS service may be when threshold between 3G cell and 2G cell performed. is distributed to 2G. If the load PS service difference between 3G cell and target 2G cell exceeds this parameter value, then the loadbased balance of PS service may be performed. is ON, the load state of target 2G If the switch cell will be considered during Non-covered InterRat handover procedure. If the switch is OFF, the load state of target 2G cell will not be considered. is ON, the NACC procedure does If the switch not require the support of the CN. Instead, the GERAN (P) SI is sent through the internal This parameter defines the switch of service information and load balancing algorithm. If the distribution exchange mechanism between RNC and BSC. SERVICE-BASED is selected, only load state of 2G target cell will be considered. If LOADBASED is selected, the difference between the load in the source cell and load in the target 2G cell will be considered in addition.
SET UMBSCCRRM(Optional)
SET UMBSCCRRM(Optional)
SET UMBSCCRRM(Optional)
ADD UEXT2GCELL(Mandatory)
SET UMBMSPERF(Mandatory)
SET UMCCHPERIODCOEF(Optional)
SET UMCCHPERIODCOEF(Optional)
SET UMCCHPERIODCOEF(Optional)
ADD MPGRP(Optional)
Number of MC priorities. This parameter is valid when the MP group type is MC.
ADD ATMTRF(Optional)
ADD ETHMD(Mandatory)
Measurement quantity used in coverage-based inter-RAT measurement in event-3A-triggered reporting mode. - Ec/No: signal-to-noise ratio Minimumindicates the received signal code - RSCP: guarantee rate of the ATM traffic power CPICH_Ec/No indicates that the Ec/No measurement quantity is used for event 3A measurement. The physical unit Identifies a maintenance domain is dB; CPICH_RSCP indicates that the RSCP measurement quantity is used for event 3A measurement. The physical unit is dBm. AUTO indicates that the EcN0 measurement name of is used for event 3A measurement if quantity the MD RNC receives the Ec/No 2D firstly. The RSCP measurement quantity is used for event 3A measurement if RNC receives the RSCP 2D firstly. Identifies a maintenance point in the maintenance alliance A maintenance point is an edge node of the MA. The type of the maintenance point added to the maintenance group. LocalMep indicates a local maintenance point and RemoteMep indicates a remote maintenance point.
ADD ETHMEP(Mandatory)
ADD ETHMEP(Mandatory)
ADD MPGRP(Optional)
ADD UCELLMCCH(Mandatory)
Physical channel ID of the MICH. TX power of the MICH. The greater the power of the MICH, For details about this parameter, refer to the 3GPP 25.433. The value indicates whether the MICH uses time and space TX diversity. For detailed information of this parameter, refer to the 3GPP TS 25.433.
ADD UCELLMCCH(Optional)
ADD UCELLMCCH(Optional)
ADD IPLOGICPORT(Optional)
ADD UFACH(Optional)
ADD UNODEBLMTPARA(Optional)
This parameter specifies the minimum spreading factor supported by downlink DPDCH. The larger the value of this parameter, the fewer the available spreading factors of downlink DPDCH. minimum value of This parameter specifies the Ec/NO in the E-FACH Ec/N0 adjustment algorithm. The formula is y = x * 0.5 - 24.5dB This parameter is valid when the ("y" represents parameter value and the corresponding the actual related to "x" represents the GUI value). event E of AMR reporting period unit for the service is set to MIN. The DL code TX power is reported periodically after the the This parameter is valid when event E1 is reported. This parameter specifies the corresponding parameter related to the reporting period.unit for the event E of BE reporting period service is set to MIN. The DL code TX power is reported periodically after the the This parameter is valid when event Ea is reported. This parameter specifies the corresponding parameter related to the reporting period.unit for the event F of BE reporting period service is set to MIN. The DL code TX power is reported periodically after the event Fa is reported. This parameter specifies the reporting period. DL basic common measurement report cycle. For detailed information of this parameter, refer to 3GPP TS 25.433. Measurement report period of event E triggered by DL OLC. For detailed information of this parameter, refer to 3GPP TS 25.433. This parameter specifies the HSDPA bit rate measurement report period. For detailed information of this parameter, refer to 3GPP TS 25.433. HSDPA power requirement measurement report period For detailed information of this parameter, refer to 3GPP TS 25.433. This parameter specifies the HSUPA bit rate measurement report period. For detailed information of this parameter, refer to 3GPP TS 25.433. UL basic common measurement report cycle. For detailed information of this parameter, refer to 3GPP TS 25.433. Measurement report period of event E triggered by UL OLC. For detailed information of this parameter, refer to 3GPP TS 25.433.
SET URACHMEASUREPARA(Optional)
SET ULDM(Mandatory)
This parameter is valid when the corresponding parameter related to the reporting period unit for the event E of VP service is set to MIN. The DL code TX power is reported periodically after the event Ea is reported. This parameter specifies the reporting period. Minimum TX power of the PCPICH in a cell. This parameter should be set based on the Minimum links environment this IMA group in actual system required for such as cell the activated stateand geographical coverage (radius) environment. Ensure that MinPCPICHPower is set under the condition of a proper proportion of soft handover area, or under the condition that no coverage hole exists.
ADD IMAGRP(Optional)
ADD UPCPICH(Optional)
STR IPCHK(Optional)
STR IPCHK(Optional)
ADD UNODEBLMTPARA(Optional)
Minimum interval between sent BFD packets This parameter specifies the minimum spreading factor supported by uplink DPDCH. The larger the value of this parameter, the fewer the available spreading factors of uplink DPDCH.
STR ETHMIRRORPORT(Mandatory)
STR ETHMIRRORPORT(Mandatory)
STR ETHMIRRORPORT(Mandatory)
Mirror type Maximum number of random access preamble loops. For detailed information of this parameter, refer to 3GPP TS 25.331.
ADD UEXT2GCELL(Mandatory)
SET UMBMSPERF(Mandatory)
SET UOPERATORSHARINGMODE(Optional)
SET UOPERATORSHARINGMODE(Optional)
SET CLKMODE(Mandatory)
MOCN Control Switch. 1) COMM_MOCN_NRI_GLOBAL_CONFIG_MO DE_SWITCH: When the switch is selected, the NRI of any CN node in the RNC is unique in the CS or PS domain. The code of the mobile communication 2) network to which the RNC belongs. COMM_MIB_MULTI_PLMN_LIST_ALLOWED _SWITCH: When the switch is selected, the operator information configured in the MOCN Working modeMulti PLMN List in the system cell is sent as of the system clock. Working modes of the information. system clock are as follows: (1) MANUAL: In this mode, you must specify a clock source and prevent the switching of the This parameter determines whether the RNC clock source. supports the MOCN function.do not need to (2) AUTO: In this mode, you When MOCN Supported, RNC can configure system specify a clock source and the multi-plmn. automatically selects the clock source with the highest priority. (3) FREE: In this mode, the crystal oscillator of GCU board is used. Server mode: BSC6900 SCTP link work mode. starts the listening and waits for the peer to send the SCTP-INIT message. Client mode: BSC6900 actively sends the SCTP-INIT message.
ADD SCTPLNK(Mandatory)
SET QUICKCFG(Mandatory)
configuration mode
SET MSP(Optional)
STR IPCHK(Optional)
Working mode of a port. When this parameter after switchover is set to CHECK_ON_STANDBY_PORT, the connectivity check is performed on the standby port. When this parameter is set to CHECK_ON_INDEPENDENT_PORT, the Backup mode of the switch protection group connectivity check is performed on the independent port. When this parameter is set to CHECK_ON_PRIMARY_PORT, the connectivity check is performed on the active port. This timer is started when an AAL2 signaling entity sends the service user an indication for modifying the bandwidth of an AAL2 path. This timer is started when an AAL2 signaling entity sends the peer node a request for modifying the bandwidth of an AAL2 path.
SET AAL2TMR(Optional)
SET AAL2TMR(Optional)
ADD UTYPRABRLC(Optional)
This parameter specifies a sampling period of the RLC retransmission ratio monitoring.
SET UDCCC(Optional)
Length of the period within which the times of consecutive failure to increase the rate of a BE service is monitored. Increase of the BE service rate is triggered by 4A measurement reports. If the times exceeds the DCCC Rate Up Fail Time Threshold, the DCCC Rate Up Fail Penalty Timer will be started, and 4A report will not be processed until DCCC Rate Up Fail Penalty Timer expires.
ADD IPLOGICPORT(Optional)
ADD SAALLNK(Optional)
Management proving mode of the SAAL link. When Management MP group number proving status is set to MPS_NORMAL, the SAAL sends the verification packet in the initial alignment. When Management proving status is set to MPS_EMERGENCY, the SAAL does not send MP verification packet in the initial alignment. the group number When Management proving status is set to MPS_NEUTRAL, the SAAL does not send the verification packet according to the user and peer requirements in the initial alignment.
ADD MPGRP(Optional)
MP type
Number of the slot where the MPU subsystem is located This switch specifies whether to add the Number of thechannel on the SCCPCH. When MSCH logical subrack where the MPU subsystem islogical channels are carried on multi-MTCH located one SCCPCH, an MSCH logical channel should be added on the SCCPCH, whichthe This parameter specifies whether to add is used tologicalscheduling control information of MSCH send channel on the SCCPCH. When the data of MTCH. channel is carried on one one MTCH logical SCCPCH, an MSCH logical channel should be added on the SCCPCH, which is used to send scheduling control information of the data of MTCH.
SET UMBMSSWITCH(Optional)
SET UMBMSSWITCH(Optional)
ADD UCELLCBSSAC(Mandatory)
ADD UCELLCBSSAC(Optional)
SET MSPCMD(Mandatory)
SET SLFSLVSW(Optional)
ADD UCELLCAC(Optional)
ADD UCELLCAC(Optional)
Available guarantee codes of all the MTCHs. This parameter is a protection for the MBMS PTM bearing. When the codes of all the MTCHs are few, pre-emption of MBMS PTM This parameter be avoided. This is because bearing should specifies the minimum This Maximum code limit of all thethe OMU when Switch forpercentage of the MTCH of MTCHs. coverage PTM bearing serves multiple users the MBMSthe self-healing maximum bearing of parameter is a to memory is overloaded limit to the the OMU processthe RAB priority ofnotWhen corresponding 0. be at the same time. The value should code oftoo the MBMS PTM bearing.RNC configures low all the cell load is high, the When the high. Otherwise,few,the system resources may all pre-emption of MBMS the MTCHs are power for the MBMS MBMS PTM bearing and be consumedshould be avoided. This avoid This bearing by the service so as to is the minimum PTM parameter specifies the cell and improve worseningpercentage of the MTCH too little capacity is leftin bearing serves coverage congestion for the non-MBMS because the MBMS PTM the MBMS service. the setup services. success rate of priority of 15. When corresponding at the same time. The value multiple users to the RAB should cover the This low power, however, the cell load is high, the RNC configures should not be too high. Otherwise, all thelow minimum coverage area of the MBMSavoid power resources may be consumed service. as systemfor the MBMS service so set to bycertain The minimum coverage areacell and improve is to a the worsening congestion in the little capacity is MBMS PTMof the coverage area associated bearing and too percentage the setup non-MBMS of the MBMS service. left for thesuccess rateservices. of the with the maximum transmit powercover the This low power, however, should FACH. Tocoverage area of the MBMS services minimum fulfill service differentiation, service. of different priorities have different minimum The minimum coverage area is set to a certain coverage areas. For details of this parameter, percentage of the coverage area associated referthethe 3GPP TS 25.346. with to maximum transmit power of the FACH. To fulfill service differentiation, services of different priorities havethe MTCH This parameter specifies different minimum coverage areas. For details ofthe rate of an multiplexing threshold. When this parameter, refer to service is lower than this threshold, the MBMS the 3GPP TS 25.346. service, together with other services, is allocated a multiplexed S-CCPCH, whose Available guarantee power of MTCH transmission rate is set to the all the MTCHs. This parameter is a protection multiplexing threshold fixedly. for the MBMS PTM bearing. When the power of all the This parameter specifies whether to apply MTCHs are little, pre-emption of MBMS PTM Robust Header be avoided. This is because bearing should Compression (ROHC) on the MTCH. The value TRUE serves multiple users the MBMS PTM bearing indicates to apply ROHCsame time. The value should not be too at the on the MTCH. high. Otherwise, all the system resources may be consumed by the MBMS PTM bearing and too little capacity is left for the non-MBMS services. Available guarantee codes of all the MTCHs. This parameter is a protection for the MBMS PTM bearing.
SET URNCMBMSPARA(Optional)
SET UMTCH(Optional)
ADD UCELLCAC(Optional)
ADD UCELLCAC(Optional)
ADD GPS(Optional)
Metric system. The values of this parameter include "MET" and "IMP". Support localization maintenance, Metric System and British Measurement can be selected.
ADD USMLCCELL(Optional)
ADD SCTPLNK(Optional)
ADD DEVIP(Optional)
SET ETHPORT(Optional)
ADD PPPLNK(Optional)
ADD MPGRP(Optional)
ADD IPMUX(Mandatory)
STR IPCHK(Optional)
ADD SAALLNK(Optional)
Number of transmitted verification packets in the initial verification. See the ITU-T Q2110.
SET UIDLEMODETIMER(Optional)
Maximum number of retransmissions of the RRC CONNECTION REQUEST message. Maximum number of retransmissions of CELL UPDATE/URA UPDATE.Protocol default value is 3. Maximum number of retransmissions of UE CAPABILITY INFORMATION. Protocol default value is 2.
SET UCONNMODETIMER(Optional)
SET UCONNMODETIMER(Optional)
SET UCONNMODETIMER(Optional)
SET UCONNMODETIMER(Optional)
Maximum number of successive "out of sync" indications received from L1. Protocol default value is 20. Maximum number of successive "in sync" indications received from L1 when T313 is activated. Protocol default value is 1. Maximum number of resend times of message "RRC CONNECTION SETUP" or "CELL UPDATE CONFIRM". default value is 1.
SET UCONNMODETIMER(Optional)
SET UCONNMODETIMER(Optional)
ADD OPC(Mandatory)
ADD N7DPC(Mandatory)
ADD MTP3RT(Mandatory)
ADD MTP3LKS(Mandatory)
ADD MTP3LNK(Mandatory)
ADD ADJNODE(Mandatory)
ADD M3LE(Mandatory)
ADD M3DE(Mandatory)
ADD M3RT(Mandatory)
The M3UA route names and the M3UA routes are in the one-to-one matching relation.
ADD M3LKS(Mandatory)
Name of the M3UA link set. The name of the M3UA signalling link set must be unique. M3UA signaling link name. The M3UA link names and the M3UA links are in the one-toone matching relation. Upper limit of random access back-off delay. For details, refer to the 3GPP TS 25.331 and 3GPP TS 25.214 protocols. Lower limit of random access back-off delay. For details, refer to the 3GPP TS 25.331 and 3GPP TS 25.214 protocols. When call shock control starts, the AMR_RRC number can be accessed per second for NodeB.
ADD M3LNK(Mandatory)
ADD URACH(Optional)
ADD URACH(Optional)
SET UCALLSHOCKCTRL(Optional)
SET SCTPSRVPORT(Optional)
Number of the NBAP service listening port When the operation and maintenance channel of NodeB is operating in the ATM, this parameter indicates the address of the operation and maintenance console. When the operation and maintenance channel of NodeB is operating in the ATM, this parameter indicates the mask of the operation and maintenance console. When call shock control starts, the register and 3G->2G reselect number can be accessed per second for NodeB. When the operation and maintenance channel of NodeB is operating in the IP transmission mode, this parameter indicates the address of the operation and maintenance console. When the operation and maintenance channel of NodeB is operating in the IP transmission mode, this parameter indicates the mask of the operation and maintenance console.
ADD UNODEBIP(Mandatory)
ADD UNODEBIP(Mandatory)
SET UCALLSHOCKCTRL(Optional)
ADD UNODEBIP(Mandatory)
ADD UNODEBIP(Mandatory)
ADD UNODEBESN(Mandatory)
ADD UNODEBESN(Mandatory)
ADD UCELLALGOSWITCH(Optional)
ADD UCELLALGOSWITCH(Mandatory)
ADD UCELLALGOSWITCH(Optional)
reduction and MBMS service power decrease. HSUPA Provided Received Scheduled EDCH OLC_EVENTMEAS: Control Power Share measurement. OLC event measurement. This algorithmpower admission EMC_UU_ADCTRL: Control starts the OLC event measurement. for emergency user CELL_CODE_LDR: Code reshuffling FACH_UU_ADCTRL: Control admission for algorithm. When the cell CODE is heavily user over FACH channels loaded, this algorithm reduces the cell If algorithms with the above values CODE The by using BE service rate reduction and load CRD_ADCTRL,HSDPA_UU_ADCTRL,HSDPA represent reshuffling. code tree are as follow: _GBP_MEAS,HSDPA_PBR_MEAS,HSUPA_U ALGORITHM_OFF: Disable reshuffling CELL_CREDIT_LDR:Credit downlink call U_ADCTRL, MBMS_UU_ADCTRL, DOFFC, admission When the cell credit is heavily The second electrical serial number of NodeB algorithm. control algorithm. HSUPA_PBR_MEAS The load factor ALGORITHM_FIRST: reduces the credit load loaded, this algorithm ,HSUPA_EDCH_RSEPS_MEAS, downlink prediction by using BE service rate reduction, of the cell algorithm will be used in EMC_UU_ADCTRL,and FACH_UU_ADCTRL CAC. uncontrollable real-time above values are selected, the corresponding QoS The algorithms with the service algorithms ALGORITHM_SECOND: be inter-RAT, PS will renegotiation, as follow: The equivalent user be enabled; otherwise, disabled. downlink represent are CS should used in numberbe inter-RAT handover, CS should not should algorithm will be CAC. be inter-RATand and PS should not be interNBM_LDC_ALL_UE: The BHO select user ALGORITHM_THIRD:Whenloose call RAT handover. to consider whether target cell occurs, no need admission control algorithm willPUC, ULOLC, If INTRA_FREQUENCY_LDB, be used in support Ue. downlinkULLDR, UDLLDR, DLOLC, CAC. NBM_LDC_MATCH_UE_ONLY: When BHO OLC_EVENTMEAS, CELL_CODE_LDR and select user occurs, only consider Ues CELL_CREDIT_LDR are selected, the supported by target cell. corresponding algorithms will be enabled; otherwise, disabled. The algorithms with the above values NBM_LDC_MATCH_UE_FIRST: When BHO represent are as follow: above values The algorithms with the select user occurs, first consider Ues ALGORITHM_REQUIRED: Always reset the represent are target cell. supported by as follow: mac-hs no matter the cells inuplink call are in ALGORITHM_OFF: Disable question the same NodeB or not. admission control algorithm. ALGORITHM_DEPEND_ON_LCG: Reset the ALGORITHM_FIRST: The load factor mac-hs only when the cells used in uplink CAC. prediction algorithm will be in question are in the different local cell group. equivalent user ALGORITHM_SECOND: The number algorithm will be used in uplink CAC. ALGORITHM_THIRD: The loose call admission control algorithm will be used in uplink CAC. This parameter is used to identify WPS users with priority. ForPriority Service) is NS/EP 5, WPS (Wireless instance, if priorities 3, 4, and 6 are Security/Emergency Preparedness) (National selected, users with priorities are regarded as WPS users. controlled by White AMR conversation service House of USA. NCS is authorized to manage the execution of the WPS project. This switch indicates whether the WPS function is supported.
ADD UCELLALGOSWITCH(Optional)
ADD UCELLALGOSWITCH(Optional)
ADD UCELLALGOSWITCH(Mandatory)
SET UWPSALGO(Optional)
SET UWPSALGO(Optional)
ADD UEXT2GCELL(Mandatory)
The Index of neighboring BSC that the gsm cell belongs to. When the RRC REQ total number of one NodeB reach this threshold the RRC flow control will be triggered.
SET UCALLSHOCKCTRL(Optional)
ADD UNODEBIP(Mandatory)
ADD UEXT2GCELL(Mandatory)
Uniquely identifying a neighboring cell. The cell is shut down automatically only when the neighboring cell load is less than the difference between the LDR threshold and this threshold. When this parameter is set to ON, and when the load of the GSM cell exceeds the related threshold, the RNC will stop the non-coverage ID of the RNC controlling a neighboring cell. based inter-RAT handover; when this Uniquely identifyingOFF, the RNC will do parameter is set to an RNC. reversely. This parameter determines whether to stop the non-coverage based handover from the UMTS network to the GSM network When the number of UEs responding toGSM according to the load control mode.the Indicating the networkinformation of or equal to counting/recounting is greater than cell. When the GSM network can provide its this threshold, the PTMUMTS network, the load information to the mode is applied to data transmission. Otherwise, the the non- is RNC determines whether to send PTP mode used. Note that the number of UEs includes coverage based handover to the GSM cell the number of connected mode UEs. GSM according to the load information of the cell and the load threshold of the GSM cell set in the UMTS cell. This parameter is invalid for the GSM network that cannot provide its load information to the UMTS network. reselection. Maximum number of non-HCS cell This parameter, along with Tcrmaxnonhcs, defines the speed estimation threshold of nonHCS cells. For detailed information, refer to 3GPP TS 25.304.
ADD UCELLDYNSHUTDOWN(Optional)
SET UINTERRATHONCOV(Optional)
ADD UCELLSELRESEL(Optional)
ADD N7DPC(Optional)
The DSP and OSP are in the associated mode or non associated mode.
ADD OMUIPRT(Mandatory)
ADD IPRT(Mandatory)
Next hop
ADD IPRTBIND(Mandatory)
ADD OPC(Mandatory)
ADD UCELLSETUP(Optional)
ADD UCNDOMAIN(Optional)
SET UOPERATORCFGPARA(Optional)
Threshold for deciding that the UE is in highmobility state. This parameter specifies a threshold for highspeed decision. After the UE reports event 1D, This parameter defines high-mobility state if the UE is considered in the of successive inNext hop of changes offor the NodeBduring sync indications required the best cell to the number trigger the radio link recovery process.The [TFASTSPDEST] is larger than radio link set remains insmaller the value is, it [NFASTSPDEST]. The the initial state until has more possibly the UE is decided in high-is the received a certain number (the number defined state. mobility by NInsyncInd) of successive in-sync indications from L1, and then the NodeB triggers the radio link recovery process, which indicates that the radio link set has been synchronized. Once the radio link recovery Network is triggered, the radio link set is process ID considered to be in the be set according to the This parameter should synchronized state. In the radio link maintenance process, actual NInsyncInd is usedIftogether withGs interface network situation . there is the the successive out-of-sync indication counter. between SGSN specifies the value of the NAS This parameter and MSC/VLR, this parameter is set to "MODE1"; Node Selection Function (NNSF) timer for CS otherwise, the For the IMSI paging of the UE in traffic paging. parameter is set to "MODE2". It is valid only whenIMSI CS connection mode, on receiving the [CN domainwith is set as Global CN ID, the RNC paging ID] the first PS_DOMAIN. stores the Global CN ID and starts the NNSF protection timer. Once the UE responds to the IMSI paging, the RNC stops the NNSF protection timer.
SET PWRPARA(Optional)
SET PWRPARA(Optional)
SET PWRPARA(Optional)
SET PWRPARA(Optional)
SET PWRPARA(Optional)
SET PWRPARA(Optional)
SET PWRPARA(Optional)
SET PWRPARA(Optional)
SET PWRPARA(Optional)
SET PWRPARA(Optional)
SET PWRPARA(Optional)
SET PWRPARA(Optional)
STR UNODEBBWRPT(Mandatory)
ADD UNODEBALGOPARA(Optional)
Cabinet number of of HSDPA users of the Maximum number NodeB NodeB. If the HSDPA user access is rejected by the NodeB, you can infer that the HSDPA licenses are insufficient. New HSDPA licenses are required. Maximum number of HSUPA users of the NodeB. If the HSUPA user access is rejected by the NodeB, you can infer that the HSUPA licenses are insufficient. New HSUPA licenses are required. ID of the adjacent node to be added. The parameter is valid when Adjacent node type is set to IUB.
ADD UNODEBALGOPARA(Optional)
ADD ADJNODE(Mandatory)
NodeB ID
STR UNODEBDETECT(Mandatory)
NodeB ID
ADD UNODEB(Mandatory) FOC UDEHOSTNODEB(Mandatory) FOC UHOSTNODEB(Mandatory) ADD UIPDL(Mandatory) ADD UNODEBALGOPARA(Mandatory) ADD UNODEBLDR(Mandatory) ADD UNODEBOLC(Mandatory) STR UNODEBBWRPT(Mandatory) ADD UCCP(Mandatory) ADD UCELLSETUP(Mandatory) ADD ULOCELL(Mandatory) ADD UNBNODESYNCMONPARA(Mandatory) ADD UNODEBALGOPARA(Optional) ADD UNCP(Mandatory) ADD UNODEB(Mandatory) ADD UCELLQUICKSETUP(Mandatory) ADT URES(Mandatory) BLK UNODEB(Mandatory)
NodeB level credit load is heavy, users are assembled in priority order among all the NodeBs and some users are selected for LDR action in order to reduce the NodeB level credit load. LCG_CREDIT_LDR (Cell group level credit congestion control algorithm): When the cell group level credit load is heavy, users are assembled in priority order among all the NodeBs and some users are selected for LDR action ID. NodeBin order to reduce the cell group level credit load. IUB_OLC (Iub Overload congestion control algorithm): When the NodeB Iub load is Overload, users IMAassembled in priority order among all the are group number of NodeB NodeBs and some users are selected for Olc action in order to reduce the NodeB Iub load. To enable some of the algorithms above, select them. Otherwise, they are disabled.
STR UNODEBBWRPT(Mandatory)
NodeB name
ADD UNODEB(Optional)
ADD UNODEBESN(Mandatory)
STR UNODEBBWRPT(Optional)
STR UNODEBBWRPT(Optional)
The mode for reporting the NodeB bandwidth information, including PERIOD and EVENT.
STR UNODEBBWRPT(Mandatory)
STR UNODEBBWRPT(Mandatory)
STR UNODEBBWRPT(Mandatory)
ADD UNODEB(Optional)
ADD UNBNODESYNCMONPARA(Mandatory)
ADD UNBNODESYNCMONPARA(Mandatory)
ADD ADJNODE(Mandatory)
ADD UNODEBLMTPARA(Mandatory)
This parameter specifies the small-scaled base station type. This parameter defines the of successive insync indications required for starting the radio Indicating whether the non-HCS speed nonThisfailure timer. When the radio link the is in link parameter specifies the ratio of set estimation parameter should the configured. be total E-DCH serving E-DCH RX power toNodeB starts the the synchronized state, the RX power. it receives successive out-of-sync a timer after The parameter indicates whether non-serving NodeB sendsdefined by grant indications of the number the relative (RG) message to the UE. shalldetails about this NOutsyncInd.The NodeB For stop and reset Priority of neighboring cells. 25.433. parameter, refer to 3GPP TS the timer after receiving successive in-sync The priority that corresponds to the indications of the number defined by this neighboring cell is valid only when the NInsyncInd.When the timer expires, the NodeB parameter is set to TRUE. The lower the triggers the easierlink failure process, and cell the radio it is priority, of neighboring for the neighboring Priority cells. indicates which as thelink set is out-of-sync. to be delivered radio measurement object. The priority that corresponds to the For example, it is more possible forthe this neighboring cell is valid only when a neighboring cell of priority 1 than a cell of parameter is set to TRUE. The lower the priority 2 to be delivered as the measurement priority, of neighboring for the neighboring cell Priority the easier it is cells. object. to be delivered as the measurement object. The priority that corresponds to the For example, it is more possible forthe this neighboring cell is valid only when a neighboring cell of priority 1 than a cell of parameter is set to TRUE. The lower the priority 2 to be delivered as the measurement priority, the easier it is for the neighboring cell object. to be delivered as the measurement object. For example, it isof neighboring cells. Priority identifier more possible for a neighboring cell that the neighboring cell TRUE indicates of priority 1 than a cell of priority 2 to be in the algorithm of neighboring priority is valid delivered as the measurement object. cell combination. FALSE indicates that the neighboring cell priority is invalid, and, in the algorithm of neighboring cell combination, the cell with invalid priority is the last one to be considered as the measurement object.
ADD UCELLSELRESEL(Optional)
ADD UCELLHSUPA(Optional)
ADD UCELLSETUP(Optional)
ADD UINTRAFREQNCELL(Mandatory)
ADD UINTERFREQNCELL(Mandatory)
TRC IPADDR(Optional)
ADD UNRIGLBCNIDMAP(Mandatory)
ADD URNCPOOLMEMBER(Mandatory)
ADD UEXT3GCELL(Mandatory)
ADD AAL2RT(Mandatory)
ADD URNCBASIC(Mandatory)
ADD UNODEB(Mandatory)
"NcountingThd" + "NPtpToPtmOffset". The transition between PTP and PTM affects user experience. Thus, to minimize ping-pong effect, the transition between PTP and PTM uses a threshold other than "NcountingThd". The two thresholds are used only to avoid ping-pong effect, so the difference between the two should not be too large. Because the value of "NcountingThd" is small, it is recommended that the default value of this parameter be used. Identifying a Network resourse: 1. The NRI numbers of CS domain and PS domain are independent from each other. Number of TRACERT packets sent to each 2. If multiple pool areas overlap, the NRI TTL uniquely identify all the CN nodes connected to it. 3. A CN node can have multiple NRIs. In one pool area, however, an NRI can only correspond to one CN node. ATM address of the destination node of the AAL2 route. The value is entered in the hexadecimal format, with the length ranging from 2 bytes to 21 bytes (including the 1-byte Neighboringis recommended that the initial H' prefix). It RNC ID. byte of the ATM address uses H'45 (indicating E.164 address) or H'39 (indicating the DCC address) or H'47 (indicating the ICD address). The ATM address starting with H'45 close to Nrnc ID. Source ATM address. It should be input in seven and half byteswiththe H'45 must be in the hexadecimal format of prefix of "H'". BCD code byte of digit). The followingto started 1.The first (15-bit it is recommended is the The parameter specifies the ATM address DSP. When the DSPE.164 address),E.164e, is all-zero, it is H'39 with H'45 (indicating NodeB. It must be input corresponding to the for example, (indicating a Neighboring RNC. (indicating Identifying DCCformat with 42 bytes including in hexadecimal address) or H'47 0x45000971500202001F00000000000000000 ICDprefix H'. ItWhen it is started that the first the address). the recommended with "H'45", is DSP 00000. Whenseven and anot all zero,must be the following(indicating is half octets it is byte is H'45 an E.164 address), E.164A. The ATM E.164e when the last part BCD (indicating a DCC address), or H'47 called address is allocated H'39 code, the ATM network. The H'45 format uniquely in of zero, such as DSP is full an ICD address). If the first byte is (indicating is recommended. 0x45000971500202001F00000000000000000 H'45, then the following seven and a half bytes 00000, called E.164A when the last partIf the (that is, 15 digits) must be a BCD code. DSP is not full parts, called DSP, are all zeros, this following of zero. H'45 is recommended. 2.It should called E.164e, for example, address is be allocated in the ATM network and cannot be repeated. H'45000971500202001F00000000000000000 Threshold for deciding whether the UE in low00000. If the DSP are not all zeros, this mobility state. address is called E.164A. The ATM address is After the slow speed timer times out, the UE is assigned in in low-mobility state if the number considered the ATM network and must be unique. It is of the best cell causedH'45 format. of changes recommended to use by the UE reporting of event 1D during [TSLOWSPDEST] is smaller than [NSLOWSPDEST]. The larger the value is, the more possibly the UE is decided in low-mobility state. NullNRI VALUE indicates that the ue assigns load to other CN nodes ,when NNSF selects other CN nodes. Specifies the number of access classes that are restricted at a time according to the flexible polling restriction mode.
SET UOPERATORCFGPARA(Optional)
ADD UCELLDSACMANUALPARA(Mandatory)
SET UDSACAUTOALGO(Mandatory)
Specifies the number of access classes that are restricted at a time according to the flexible polling restriction mode.
SET ETHPORT(Optional)
Ratio of the minimum guarantee bandwidth of the OAM stream to the port bandwidth
ADD PPPLNK(Optional)
ADD MPGRP(Optional)
ADD IPLOGICPORT(Optional)
ADD ETHTRK(Optional)
Ratio of the minimum guarantee bandwidth of the OAM stream to the port bandwidth DSCP value of the OAM stream. The data of the OAM stream are not added to queues 0 to 5 for transmission. Instead, the data of the OAM stream is added to the dedicated queue.
SET QUEUEMAP(Mandatory)
SET QUEUEMAP(Optional)
ADD OBJALMSHLD(Mandatory)
Shield of Qoffset1 alarm.neighboring cell one Offset type of the when "ALL" indicates load shield type instead of all types. cell (Note: is heavier than that of the center Qoffset1 is used as a priority to decide which cell will be selected in cell selection or reselection) For detailed neighboring of this Offset of Qoffset1 when information cell load parameter, refer toof the center cell (Note: is lighter than that 3GPP TS 25.304. Qoffset1 is used as a priority to decide which cell will be selected in cell selection or reselection) For detailed neighboring of this Offset of Qoffset2 when information cell load parameter, refer to 3GPP TS 25.304.(Note: is heavier than that of the center cell Qoffset2 is used as a priority to decide which cell will be selected in cell selection or reselection) For detailed information of this parameter, refer to 3GPP TS 25.304.
ADD UCELLPUC(Optional)
ADD UCELLPUC(Optional)
ADD UCELLPUC(Optional)
ADD UCELLPUC(Optional)
ADD UCELLPUC(Optional)
ADD UCELLPUC(Optional)
ADD EMSIP(Optional)
ADD UCNOPERATOR(Mandatory)
the parameter, consider the hysteresis for which the load monitoring responds to the load change. For example, when the layer 3 filter coefficient is 6, the hysteresis for which the load measurement responds to the stepOffset ofsignals is when neighboring cell load function Qoffset2 about 2.8s, namely that the is lighter than thatthe the center cell (Note: system can trace of load control effect about Qoffset2 after each load control. decide case, 3 s later is used as a priority to In this which cell OLC period timer length cannot be smaller the will be selected in cell selection or reselection) For detailed information of this than 3s. parameter, refer to 3GPP TScenter cell load OlcPeriodTimerLen along with Offset of Sintersearch when 25.304. ULOLCFTFRstrctUserNum, level is "Heavy" (Note: Sintersearch is used to DLOLCFTFRstrctUserNum,inter-frequency cell decide whether to start the ULOLCFTFRSTRCTTimes, reselection). For detailed information of this Operator types. The operator 25.304. as DLOLCFTFRSTRCTTimes, types are parameter, refer to 3GPP TScenter cell load Offset of follows: Sintersearch when ULOLCTraffRelUserNum, and level is "Light" (Note: Sintersearch isthe time it Primary operator: Each RAN system has only DLOLCTraffRelUserNum determine used to decide whether to start the primary operatorcell one primary operator. The inter-frequency takes to release the uplink/downlink overload. reselection). Forofis excessively long, ofRAN owns all or part the resources of the this If the OLC perioddetailed information the parameter, refer to 3GPP TS 25.304. system.may respondof the slowly tooperator If system The license very primary overload. controls the features and functions supported the OLC period is excessively short, by the RAN system. unnecessary adjustment may occur before the Secondary operator: Each RAN system can previous OLC action has taken effect, and have a maximum of performance is therefore the systemthree secondary affected. operators. A secondary operator owns part of the resources of the RAN system. The license of the secondary operator controls the functions and features supported by the External virtual IP address of the OMU secondary operator. Outer Operator: In order to support mobility between two RNCs, we define the operator switched over to the target RNC as an outer Subnet mask of the OMU in the external operator. network The outer operator is not a primary or secondary operator of the source RNC. Common operator: PLMN-id indicated in the system broadcast information as defined for conventional networks, which non-supporting Account of the operator serving operator. If UEs understand as the there are multiple operators in the operator group to which the cell belongs, you are advised to configure the operatorstransport This parameter specifies the peer as common operators. for the typical traffic. When this channel type typical traffic is applied on UL, it refers to the DL transport channel type. When this typical traffic is applied on DL, it refers to the UL transport channel type.
ADD UTYPRABRLC(Mandatory)
SET USMLC(Optional)
SET OPT(Optional)
Optical interface standard Azimuth of the semi-major axis of an uncertain area in the cell center (the clockwise angle from the north to the semi-major axis).
ADD USMLCCELL(Mandatory)
ADD USMLCCELL(Optional)
SET USMLC(Optional)
ADD UEXT3GCELL(Optional)
Mobility flag of the overlay network. This flag is valid when the OVERLAY switch is Operation type ofthe flag is set to set to ON. When the command. NOT_FORBIDDEN, this means that, when using the H service, the UE can deliver the intra-frequency measurement and handover to the DRNC cell, location activation. Flag of OTDOAwhich can be used as the target cell of inter-frequency handover. When UE positioning mode when the this means that, the flag is set to FORBIDDEN, OTDOA method is selected. The UE supports both UEwhen using the H service, the UE cannot based OTDOA mode and UE-assisted OTDOA deliver the intra-frequency measurement and mode. handover to the neighboring cell, which cannot be used as the target cell of inter-frequency handover. Note that the H+CS combined service is considered as the CS service.
ADD AAL2PATH(Optional)
The ownership of the AAL2 path is local or peer Whether to indicate that the " destination ATM node " is the same as the ATM node specified by the " adjacent node ID ". CPU usage threshold for paging flow control. When the average CPU usage of sliding windows reaches or exceeds the threshold, paging flow control is threshold for recovery Packet queue usage triggered. from paging flow control. When the average packet queue usage of sliding windows is lower than the threshold, paging flow control is stopped.
ADD AAL2RT(Optional)
SET FCMSGQTHD(Optional)
SET FCMSGQTHD(Optional)
SET FCSW(Optional)
ADD IPPATH(Optional)
IP path check flag ID of one AAL2 path between two AAL2 nodes. The PATHID of the same AAL2 path configured between two AAL2 nodes must be the same. The value should not be equal to 0.
ADD IPPATH(Mandatory)
LOP VCL(Mandatory)
SET VCLLOP(Optional)
ADD IPPATH(Optional)
ADD UPCH(Optional)
ADD UCELLLDB(Optional)
ADD ATMTRF(Optional)
SET UCORRMALGOSWITCH(Optional)
Ec/N0 can be dynamically reconfigured on the E-FACH. When the switch is disabled, the minimum value of Ec/N0 is directly configured for the NodeB. 5) PC_FP_MULTI_RLS_IND_SWITCH: When the switch is on, the RNC informs the NodeB of the current RLS number through the FP inband signaling. 6) PC_HSUPA_HARQNUM_AUTO_ADJUST_S WITCH: When AAL2 PATH ID the switch is on, the HSUPA service can use the smaller target number of retransmissions when the uplink is not congested. If the uplink is congested, the HSUPA service can use the typical target IP path ID,Identifying an IP path. number of retransmissions. 7) PC_HSUPA_PO_UPDATE_SWITCH: When this switch and the OLPC switch are both on, the RNC periodically adjust the power offset of AAL2 PATHE-DCH. the HSUPA ID 8) PC_INNER_LOOP_LMTED_PWR_INC_SWIT CH: When the switch is on, the limited power increasethe IP path used for DL inner loop Type of function is power control. 9) PC_OLPC_SWITCH: When the switch is on, the RNC updates the UL SIR TARGET of TX power of the PCPICH side cell. This radio links on the NodeB in a through IUB parameter should be set based on the actual PatchFP inband signaling. DCH type system environment such as cell coverage 10) Offset ofand geographical environment.the the (radius) the PCH transmit power from For PC_RL_RECFG_SIR_TARGET_CARRY_SWI PCPICH transmit powerdownlink coverage For detailed cells to be covered, theisin a cell.a new initial TCH: When the switch not refer 3GPP information of this parameter,on, toFor the should be guaranteed asradio link SIRTarget value, during a premise. TS 25.433. cells requiring soft based on the converged reconfiguration, is handover area, this parameter should satisfy the proportion of soft SIRTarget value of current outer loop power handover areas stipulated in the network is control. In addition, the UL SIRTarget value planning. Forin the radio link reconfiguration not included detailed information of this parameter,to the to 3GPPThis25.433. isor messages refer NodeB. TS switch only Pilot power adjustment step increased valid when in each increase of the cell decreased the OLPC switch is ON. 11) PC_SIG_DCH_OLPC_SWITCH: This breathing algorithm or decrease of cell pilot. switch determines whether SIG DCH is For detailed information of this parameter, involved in UL OLPC. When refer to 3GPP TS 25.433. the switch is on, SIG DCH is involved in UL OLPC as service DCH is. If the current link has only SIG DCH, SIG DCH is always involved in UL OLPC. 12) Peak rate of the ATM traffic PC_UL_SIRERR_HIGH_REL_UE_SWITCH: When the switch is on, the UE is unconditionally released if the SIR error is high and the cell is overloaded. Otherwise, the UE is not released.
ADD M3LKS(Optional)
Pending timer of the M3UA link set Meaning: ID of the peer cell to which the current cell corresponds in a RNC POOL in the case of RNC Node Redundancy
ADD PPPLNK(Mandatory)
Peer IP address of the PPP link. The IP address of the PPP link on the peer side of the BSC.
ADD MPGRP(Mandatory)
STR IPCHK(Mandatory)
STR IPLOPTST(Mandatory)
Peer IP address
ADD SCTPLNK(Mandatory)
ADD SCTPLNK(Optional)
ADD IPPATH(Mandatory)
The peer IP address should not be the same as the local address.
LOP VCL(Mandatory)
ADD IPOAPVC(Mandatory)
Peer IP address
SET VCLLOP(Optional)
ADD IPPATH(Optional)
ADD UNODEB(Mandatory)
ID configured in another RNC of the RNC POOL. In RNC Node Redundancy function, the two RNCs form an RNC POOL and the same physical NodeB is configured in both RNCs.
ADD SCTPLNK(Mandatory)
ADD UNODEB(Mandatory)
This parameter specifies the RNC ID of the peer RNC in the RNC POOL.
ADD UIURGCONN(Mandatory)
ADD UIURGCONN(Mandatory)
ADD UIURGCONN(Mandatory)
ADD IPOAPVC(Mandatory) SET UINTERRATHOCOV(Optional) SET UINTERRATHONCOV(Optional) ADD UCELLINTERRATHOCOV(Optional) ADD UCELLINTERRATHONCOV(Optional)
ADD UCELLMBDRINTERRAT(Optional)
ADD UTYPRABDCCCMC(Optional)
IPoAlength peer type The PVC of the penalty timer of Inter-Rat handover failure due to physical channel This parameter Inter-Rat handover will be failure. No try ofspecifies the pending-timeafter-trigger for traffic-related taken until penalty finishes. event 4A on DCH. The traffic-related event 4A on DCH is Also see parameter InterRatPhyChFailNum. not reported again during the time defined by this parameter after such the event is reported. This parameter specifies an pending-timeStrech for penalty setinter-RATtoo many of to avoid handover This parameter traffic-related event 4B on after-trigger for is failure. No try of inter-RAT handoverThethe channel reconfiguration operations. to larger DCH. The traffic-related until 4B on finishes. is penalty cell will be taken eventpenalty DCH time the value of this parameter, the longer the by not reported again during the time defined fromparameter after such traffic-related event this the last reporting of an event is reported. 4A on DCH to the set toreporting, and the This parameter is next avoid too many smaller the possibility of operations. The larger channel reconfiguration triggering trafficrelated event 4Aparameter, the longer the time the value of this on DCH. from the last reporting of traffic-related event 4B on DCH to the next reporting, and the smaller the possibility of triggering trafficrelated event 4B on DCH. This parameter specifies the number of pending periods after event A is triggered. During the pending time, no event related to RLC retransmission ratio is reported.
ADD UTYPRABDCCCMC(Optional)
ADD UTYPRABRLC(Optional)
ADD UTYPRABRLC(Optional)
ADD IPPATH(Optional)
2B event retry period. This parameter specifies the number of If the inter-frequency event B is triggered. pending periods after handover base on 2B fails, RNC pending time, no retry related to During the triggers periodicalevent algorithm. This retransmission ratio is reported. RLC parameter defines the length of the event 2B retry period. The smaller the value of this parameter, the more frequent the handover Retry period for the event 2C. retry due to inter-frequency handoveron 2C If the inter-frequency handover base failure, and the faster the UE to be successfully fails, RNC period periodical Ping checktriggers of IP Path retry algorithm. handed over to the target cell whose the event This parameter defines the length of load is restored,period. 2C retry thus lowering the probability of call drops. In this case, however, parameter, the The smaller the value of this frequent handover retry the handoverload to theto intermore frequent brings more retry due RNC Retry period for the system. handoverevent 3A. the faster the frequency failure, and This parameter defines the length of the event UE retry period. The smaller the value thethis to be successfully handed over to of 3A target cell whose load is restored. handover parameter, the more frequent the In this case, however, to inter-RAT handover failure, and retry due frequent handover retry brings more Retry period for system. load to the RNC the event 3C. the faster the UE to be successfully handed This parameter defines the length of the event over to the target cellsmaller the value of this 3C retry period. The whose load is restored, thus lowering the probability of call drops. In parameter, the more frequent the handover this case,to inter-RAT handover failure,retry retry due however, frequent handover and brings more load to the successfully handed the faster the UE to be RNC system. over to the target cell whose load is restored, thus lowering the probability of call drops. In this case, however, frequent handover retry brings more load to the RNC number of This parameter specifies the system. reporting times of event 1A for periodical reporting. When the actual reporting times exceeds the set value, the periodical reporting ends. This parameter specifies the number of Period commonof event 1C for protection timer reporting times measurement periodical coefficient. Timer length of reporting reporting. When the actual common times measurement report protection = max (10000, exceeds the set value, the periodical reporting this parameter x common measurement report ends. This parameter specifies thecommon of period). The unit is ms. The number reporting times of event 1J for periodical measurement report protection timer indicates reporting. When the actual reporting times the maximum length between two valid exceeds the set value, the periodical reporting common measurement reports. If the real time ends. exceeds the timer length of common measurement report protection, the common measurement is faulty and a new one is set up. For detailed information of this parameter, refer to 3GPP TS 25.433.corresponding It is used to calculate the dynamic persist scaling factor for ASC2~ASC7. It is valid for ASC2-ASC7 only and mandatory. For detailed information of this parameter, refer to 3GPP TS 25.214.
ADD UPRACHASC(Mandatory)
ADD PPPLNK(Optional)
ADD MPGRP(Optional)
SET PHBMAP(Mandatory)
ADD IPMUX(Mandatory)
ADD UPRACHACTOASCMAP(Optional)
ADD UAICH(Optional)
Uniquely identifying a PCCPCH in a cell. Uniquely identifying an SCCPCH corresponding to a paging indication channel in a cell.
ADD UPCPICH(Optional) ADD UPRACHASC(Optional) ADD UPRACHBASIC(Optional) ADD UPRACHSLOTFORMAT(Optional) ADD UPRACHTFC(Optional) ADD URACH(Optional)
ADD UPSCH(Optional)
ADD USSCH(Optional)
ADD UCELLMCCH(Mandatory)
ADD UPICH(Optional)
Uniquely identifying a PICH in a cell. Indicating the number of PIs contained in each frame of the PICH For detailed information of this parameter, refer to 3GPP TS 25.211. Difference between the transmit power of PICH and that of PCPICH. For details, refer to the 3GPP TS 25.433 protocol.
ADD UPICH(Optional)
ADD UCHPWROFFSET(Optional)
STR IPLOPTST(Mandatory)
SET CERTFILE(Optional)
Interface to enable the private key password Whether Board Slot No DISABLE: indicating that the private key password is disabled ENABLE: indicating that the private key password is enabled
STR ETHOAMLOOPTST(Optional)
Indicates the number of the packets for remote loopback test of the OAM in the Ethernet Indicates the length of the packets for the remote loopback test of the OAM in the Ethernet
STR ETHOAMLOOPTST(Optional)
STR IPLOPTST(Optional)
PING IP(Optional)
Indicates the size of the PING packet, neither IP header nor ICMP header is included.
PING MAC(Optional)
Sent packet size Maximum PLMN tag value corresponding to a LAC. It is defined by the operator. For detailed information of this parameter, refer to 3GPP TS 25.331.
Minimum PLMN tag value corresponding to a LAC. It is period of the packet dropFor detailed Statistics defined by the operator. ratio. This informationindicates the period for collecting parameter of this parameter, refer to 3GPP TS 25.331. information about the packet drop the statistics ratio. Note that the unit of this parameter is 100 milliseconds. The actual delay statistics period is the value of this parameter multiplied by 100 milliseconds.ratio threshold for speed Packet drop reduction. When the packet drop ratio exceeds the value of this parameter, the rate of the logical port is reduced. Note that the unit of this parameter is a thousand to one. CPU usage threshold for performance monitoring. When the average CPU usage of sliding windows reaches or exceeds the threshold, performance monitoring performance Packet queue usage threshold for is triggered. monitoring. When the average packet queue usage of sliding windows reaches or exceeds the threshold, performance monitoring is triggered. threshold for recovery from CPU usage performance monitoring. When the average CPU usage of sliding windows is lower than the threshold, performance monitoring is stopped. Packet queue usage threshold for recovery from performance monitoring. When the packet queue usage of sliding windows is lower than the threshold, performance monitoring is stopped.
ADD IPLOGICPORT(Optional)
ADD IPLOGICPORT(Optional)
SET FCCPUTHD(Optional)
SET FCMSGQTHD(Optional)
SET FCCPUTHD(Optional)
SET FCMSGQTHD(Optional)
SET FCSW(Optional)
SET SCUPORT(Optional)
SET ALMPORT(Mandatory)
ADD OBJALMSHLD(Mandatory)
Port No. of the port where the alarm is Number of environment alarm generated, only the ports for data transmission are supported, such as E1/T1 port, channelized optical port tributary, optical port, and Ethernet port
SET E1T1LOP(Optional)
STR E1T1TST(Optional)
SET OPTLOP(Mandatory)
SWP ETHPORT(Mandatory)
Port number
SET OPT(Optional)
Port number
SET COPTLNK(Optional) SET ETHPORT(Optional) ADD ETHREDPORT(Mandatory) ADD ETHIP(Mandatory) ADD ETHMEP(Mandatory)
Port number
Ethernet port
ADD IPLOGICPORT(Optional)
Ethernet port
ADD UCCP(Mandatory)
No. of the CCP port. For detailed information of this parameter, refer to 3GPP TS 25.430.
ADD ROLLBACKPOINT(Optional)
SET UQUEUEPREEMPT(Optional)
Timer length of the queue poll. The queue is polled for every time specified in this parameter. During each poll, all the expired users are removed from the queue and this user fails in access. Among all the unexpired users, resources are allocated in the order of name of the to low priority. If resource high priority rollback point. allocation is successful, the user succeeds in access and traverse of this queue is stopped. Otherwise, the rest users are traversed until all the unexpired users go through this. Interval of sending the Poll messages. It indicates the period during which the peer end responds after receiving a message.
ADD SAALLNK(Optional)
ADD FTPSCLTDPORT(Mandatory)
This port is provided by the FTP server to be visited by the FTP client.
ADD PORTFLOWCTRLPARA(Mandatory)
Port protocol type Indicates the type of the physical port used by the local maintenance point in the maintenance group. FE indicates the FE port and TRUNK indicates the aggregation group.
ADD ETHMEP(Mandatory)
ADD EMU(Optional)
Relay switch 1
ADD EMU(Optional)
Relay switch 2
ADD EMU(Optional)
Relay switch 3
ADD EMU(Optional)
Relay switch 4
ADD EMU(Optional)
Relay switch 5
ADD EMU(Optional)
Relay switch 6
ADD UPRACHTFC(Mandatory)
The power offset between the last access preamble and the message control part. The power of the message control part can be obtained by adding the offset to the access preamble power. For detailed information of this parameter, refer step of the random access The power increase to 3GPP TS 25.213. preambles transmitted before the UE receives the acquisition indicator in the random access process. For detailed information of this parameter, refer to 3GPP TS 25.211.
ADD UPRACHBASIC(Optional)
ADD PPPLNK(Optional)
ADD MPLNK(Optional)
ADD IPLOGICPORT(Optional)
ADD PORTFLOWCTRLPARA(Optional)
Whether to enable the PPP frame multiplexing PPP link number function. If this parameter is set to ENABLE, the PPP frame multiplexing function is enabled. If this parameter is set to DISABLE, the PPP frame multiplexing function is disabled. Inter-frequency measurement reporting This parameter applies to the FG2a, GOUa, interval. and UOIa(IP) boards. For the boards working In periodical report mode, the interval between in ATM transmission mode, this parameter is two reportsto 2. For the FG2c, GOUc, or POUc always set is the configured value. However, it is not recommended that the value to 2. board, this parameter is always set "NON_PERIODIC_REPORT" be set, upon which the UE behaviour is not defined. This parameter has impact on the Uu signaling Uniquely identifying atoo short and cell flow. If the interval is PRACH in a the corresponding tohigh,AICH. frequency is too the the RNC may have burden in processing signaling. If the interval is too long, the network cannot detect the signal change in time, which may delay the interfrequency handover and thus cause call drops. The maximum number of preambles transmitted in a preamble ramping cycle. For detailed information of this parameter, refer to 3GPP TS 25.211.an available preamble Sequence No. of signature. A maximum of 16 signatures (from signature 0 to 15) can be selected. For detailed information of this parameter, refer to 3GPP TS 25.213.
ADD UPRACHBASIC(Optional)
ADD UPRACHBASIC(Mandatory)
SET UQUEUEPREEMPT(Optional)
SET UQUEUEPREEMPT(Optional)
has impact on the TC-based priorities. When the priority is based on the TC and the switch is enabled, for the following two situations, the preempting service should have a higher priority and ARP priority than the preempted service does: 1.The preempting service is the streaming service and the preempted service is the interactive or background service. 2. The preempting service is the interactive service and the preempted service is the background service. Printing control threshold. If the CPU usage of sliding windows reaches or exceeds the threshold, printing flow control is triggered on the serial port. Printing control threshold. When the packet queue usage of sliding windows reaches or exceeds the threshold, printing flow control is triggered on the serial port. Printing control threshold. If the CPU usage of sliding windows is lower than the threshold, printing flow control on the serial port is stopped. Printing control threshold. When the packet queue usage of sliding windows is lower than the threshold, printing flow control on the serial port is stopped.
SET FCCPUTHD(Optional)
SET FCMSGQTHD(Optional)
SET FCCPUTHD(Optional)
SET FCMSGQTHD(Optional)
SET FCSW(Optional)
Whether to control the printing flow on the serial port Route priority. The boards FG2a, GOUa, UOIa(IP), FG2c, and GOUc support the Route priority. The highest priority is configurationby 0. represented of routes with different priorities. Suppose two or more routes are configured and their addresses and masks are the same, and the addresses of the next hops and Priority of These routes link. beindicates the priorities. the signaling can 0 configured in highest priority. the active and standby mode. When the route 1.There are three block priorities: high, normal Reference priority determine and priority with low. used to is availablewhichonly this is and higher in the priority sequence. arranged first the system switches to the route route ispriority: Blocking a cell immediately. 2.High valid,preferably used, the priority If thelower priority once the route with higher with ARP is 3.Normal priority: > silver > a cell oncethe ARPs Blocking copper. If there sequence is priority users gold within a specified time, or fails. in it are no the same, the TrafficClass is used and are all blocking it even if there are some users>when the priority sequence is conversational the specifiedinteractive > background. streaming > time expires. 4.LowTrafficClass is preferably used, the are If the priority: Blocking a cell when there no users in the cell. conversational > streaming priority sequence is This parameter specifies the capability of the > interactive > background. If the TrafficClass cells with a specific [Service priority group factors are all the same, the ARP factor is Identity] for extension services, such as CMB used and the priority sequence is gold > silver and MBMS. The value 0 means that these > copper. support extension services. The cells do not value 1 indicates the highest priority, i.e. extension services are preferably absorbed by this group of cells. The value 7 indicates the lowest priority.
ADD IPRT(Mandatory)
BLK UCELL(Optional)
SET UUSERPRIORITY(Optional)
ADD USPG(Optional)
ADD USPG(Optional)
ADD USPG(Optional)
ADD USPG(Optional)
ADD USPG(Optional)
SET CERTFILE(Optional)
SET URRCTRLSWITCH(Optional)
R5 and above UE accepts the CR; R99/R4 UE ,if it receives the START LIST value from RB SETUP COMPLETE,RNC figures that UE accepts the CR; This parameter specifies the capability of the cellsR99/R4specificit[Service priority group with a UE ,if only receives the START value from RB SETUP COMPLETE,RNC Identity] for HSDPA services. The value 0 figures that UE does not accept the CR ; means that these cells do not support HSDPA when it is The checked, whetherthe highest services. not value 1 indicates RNC accept This parameter specifies the capability of the the CR or not is according to are preferably priority, i.e. HSDPA [Service priority group cells with a specific services CR2284R1_SWITCH. of cells. The value 7 absorbed by this group Identity] for HSUPA services.two switches The relations lowest priority. The value 0 indicates the between these support HSUPA means that these cells dothe capability of the CR2284R1_SWITCH and This parameter specifies not services. The value [Service priorityhighest CR2284R1_COMPATIBLE_SWITCH are cells with a specific 1 indicates the groupas priority, i.e. HSUPA services are preferably follows: for R99 non-real-time services. The Identity] absorbed by this group of cells do not support (1)CR2284R1_COMPATIBLE_SWITCH is 7 value 0 means that these cells. The value indicates the lowest priority. The value 1 checked, RNC is self-compatible,so the R99 non-real-time services. CR2284R1_SWITCH is invalid; R99 non-realindicates the highest priority, capability of the This parameter specifies the i.e. (2)CR2284R1_COMPATIBLE_SWITCH this time services are preferably absorbed byis not cells with the CR2284R1_SWITCH is valid. a specific [Service priority checked,cells. The value 7 indicatesgroup group of for R99 real-time services. The value the lowest Identity] 12)CDT_MSG_FULL_TRACE:When it is priority. that these cells do not support R99 0 means checked,CDT trace function which starts real-time services. The value 1 indicates the tracing from message RRC CONNECT highest priority, i.e. R99 real-time services are REQUEST. preferably absorbed by this group of cells. The 13)COMBINE_OPERATION_DRD_SWITCH. value 7 indicates the lowest priority. message When it is on,RNC will not reject the RB SETUP CMP without the IE active time. 14)UL_INTER_PROTECT_SWITCH.When the switch is off,RNC will not do integrity protection check forthe private key file Name of uplink RRC messages. 15)UPLINK_MDC_ENHENCEMENT_SWITCH .When it is checked ,uplink MDC enhancement This parameter used. function will be specifies the processing duration of the cell blocking in the RNC. 16)NODEB_PRIVATE_INTERFACE_SWITCH. When it is checked ,the NodeB private interface data can be taken to the NodeB or DRNC through the protocol type, including Identifies the DSP IUB or IUR protocol message. ITUT(International Telecommunication Union Telecommunication Standardization Sector), ANSI(American National Standards Institute), and TTC(Telecommunication Technology Committee (Japan)). request to RRC layer, if After sending release the Background Radio Access Bear haven't been released until the Background service T2 timeout, the PDCP layer will resend release request indication. After sending release request to RRC layer, if the Conversational Radio Access Bear haven't been released until the Conversational service T2 timeout, the PDCP layer will resend release request indication. After sending release request to RRC layer, if the IMS Radio Access Bear for signal haven't been released until the IMS service T2 timeout, the PDCP layer will resend release request indication. After sending release request to RRC layer, if the Interactive Radio Access Bear haven't been released until the Interactive service T2 timeout, the PDCP layer will resend release request indication.
ADD N7DPC(Optional)
SET UPSINACTTIMER(Optional)
SET UPSINACTTIMER(Optional)
SET UPSINACTTIMER(Optional)
SET UPSINACTTIMER(Optional)
SET UPSINACTTIMER(Optional)
After sending release request to RRC layer, if the Streaming Radio Access Bear haven't been released until the Streaming service T2 timeout, the PDCP layer will resend release request indication.
SET E1T1(Optional)
Port selection
SET OPT(Optional)
Port selection
SET COPTLNK(Mandatory)
Port selection Indicating whether to replace relocation procedure with DSCR procedure between the RNC and the Neighboring RNC for PS BE Traffic.
ADD UNRNC(Optional)
ADD TRMFACTOR(Optional)
ADD TRMMAP(Optional)
R99 PS background service bearer primary path PS background primary path load R99 threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the PS background service.
ADD LOADEQ(Optional)
ADD TRMMAP(Optional)
R99 PS background service bearer secondary path PS background primary secondary path R99 load ratio threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the PS background service.
ADD LOADEQ(Optional)
ADD TRMFACTOR(Optional)
ADD UPSCH(Optional)
Offset of the PSCH transmit power from the PCPICH transmit power in a cell.
ADD TRMFACTOR(Optional)
ADD TRMMAP(Optional)
ADD LOADEQ(Optional)
R99 PS conversational service primary path R99 PS conversational primary path load threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the PS conversational service.
ADD TRMMAP(Optional)
ADD LOADEQ(Optional)
R99 PS conversational service secondary path R99 PS conversational primary secondary path load ratio threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the PS conversational service.
ADD TRMFACTOR(Optional)
ADD UEXT3GCELL(Mandatory)
Primary downlink scrambling code. Sequence No. of a DL primary scrambling code in a cell. For detailed information of this parameter, refer to 3GPP TS 25.413. load R99 PS high interactive primary path threshold. It is one condition for selecting the PS domain Relocation GSM load THD. primary path or secondary path in the case of This parameter specifiesPS high domain the establishment of the the PS interactive relocation GSM load threshold. service. high interactive primaryWhen the GSM R99 PS load policy is used, that is, whensecondary path load ratio threshold. It is one condition for [NcovHoOn2GldInd] in SET selecting the primary path or secondary path in INTERRATHONCOV is set to ON, the PS the case of the establishment of the PS high domain inter-system relocation out process will interactive service. be stopped if the GSM system send its cell load to the RNC and the cell load exceeds the PS domain Reloc GSM load THD. Otherwise, the RNC does not stop the PS domain intersystem relocation out process. When detecting that the Ps' Background User had no data to transfer for a long time which longer than this timer, the PDCP layer would request the RRC layer to release this Radio Access Bear.
ADD LOADEQ(Optional)
ADD LOADEQ(Optional)
SET UPSINACTTIMER(Optional)
SET UPSINACTTIMER(Optional)
When detecting that the Ps' Conversational User had no data to transfer for a long time which longer than this timer, the PDCP layer would request the RRC layer to release this Radio detecting that the Ps' IMS signal had no When Access Bear. data to transfer for a long time which longer than this timer, the PDCP layer would request the RRC layer to release this Radio Access Bear. detecting that the Ps' Interactive User When had no data to transfer for a long time which longer than this timer, the PDCP layer would request the RRC layer to release this Radio Access Bear. that the Ps' Streaming User When detecting had no data to transfer for a long time which longer than this timer, the PDCP layer would request the RRC layer to release this Radio Access Bear.
SET UPSINACTTIMER(Optional)
SET UPSINACTTIMER(Optional)
SET UPSINACTTIMER(Optional)
SET UOPERATORCFGPARA(Optional)
SET UOPERATORCFGPARA(Mandatory)
ADD TRMFACTOR(Optional)
ADD TRMFACTOR(Optional)
ADD TRMMAP(Optional)
ADD TRMMAP(Optional)
ADD TRMMAP(Optional)
ADD TRMMAP(Optional)
ADD TRMMAP(Optional)
ADD TRMMAP(Optional)
ADD LOADEQ(Optional)
R99 PS middle PRI interactive secondary path R99 PS low interactive primary path load threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the PS low interactive service. low interactive primary secondary path R99 PS load ratio threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the PS low interactive service. R99 PS middle interactive primary path load threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the PS middle interactive service. middle interactive primary secondary R99 PS path load ratio threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the PS middle interactive service. This parameter specifies feature mode of operators in the PS domain. You should configure the network resource identifier (NRI) when MOCN or Iu-Flex is supported.
ADD LOADEQ(Optional)
ADD LOADEQ(Optional)
ADD LOADEQ(Optional)
SET UOPERATORCFGPARA(Optional)
SET UOPERATORCFGPARA(Mandatory)
Network Resource Identity(NRI) length forto Threshold of PS call drop ratio per CPUS PS domain. alarm.In a checking period, if the report KPI ratio is higher than this threshold and the number of PS number of PS RAB establish The minimum call release is higher than the related threshold, the report KPI alarm.calladrop request per CPUS to KPI alarm of PS In ratio is reported. the number of PS RAB checking period,if establish request is higher than the threshold and the PS RAB setup successful ratio is lower than this threshold,thesetup successful ratio Threshold of PS RAB KPI alarm of PS RAB setup ratio to report KPI alarm. In a checking per CPUS is reported. period,if the ratio is lower than this threshold and the number of PS RAB establish request is higher than the related PS call release per The minimum number of threshold,the KPI alarm of PS RAB setup ratio is checking CPUS to report KPI alarm.In a reported. period, if the number of PS call release is higher than the related threshold and the PS call drop ratio is higher than this threshold, the KPI alarm of PS call drop ratio is reported.
SET UKPIALMTHD(Optional)
SET UKPIALMTHD(Optional)
SET UKPIALMTHD(Optional)
SET UKPIALMTHD(Optional)
ADD UCELLDSACMANUALPARA(Mandatory)
SET UDSACAUTOALGO(Mandatory)
ADD UCELLHOCOMM(Optional)
ADD TRMFACTOR(Optional)
ADD TRMMAP(Optional)
ADD LOADEQ(Optional)
ADD TRMMAP(Optional)
ADD LOADEQ(Optional)
ADD TRMFACTOR(Optional)
SET UCORRMALGOSWITCH(Optional)
Indicating whether the cell allows PS service preemption and queuing fail. inter-RAT handover. 2) ON: PS service inter-RAT handover is PS_BE_INIT_RATE_DYNAMIC_CFG_SWITC enabled. the switch is on, the initial rate of the H: When OFF: PS service inter-RAT handover is service should be dynamically configured disabled. to the value of Ec/No reported by according Servicewhen the PS BE to the handover the UE handover refers service is established. attribute and related parameter configuration 3) PS_BE_IU_QOS_NEG_SWITCH: When the on the is on, the Iu QoSeach service.functionais switch network side for Negotiation When service is established, the related applied to the PS to service if Alternative Specifies whetherBE impose the access RAB measurements and domain. in the RANAP Parameter Values IE is present restriction on the PSinter-RAT handover are immediately triggered. These two switches are RAB ASSIGNMENT REQUEST or enabled only for service handover; generally, RELOCATION REQUEST message. they are disabled by default. 4) PS_RAB_DOWNSIZING_SWITCH: When Whether to impose the access restriction on Note that theon and the RAB downsizing only the switch is service handover is enabled the PS domain. when the handover attribute is set to is license is activated, the initial speed HO_TO_GSM_SHOULD_BE_PERFORM and determined on the basis of cell resources. PS service inter-RAT handover BEset to ON. Downsizing is implemented for is services. Both conditions are mandatory. For hybrid 5) services, the service handover is not triggered. PS_RSC_FEEDBK_RABSETUP_CACFAIL_S WITCH: When the switch is on, the SF feedback function is supported. If the SF is provided in feedback information after the WCDMA R99 PS streaming service downlink application for the cell SF is rejected, access at factor a lower speed is performed on the basis of the returned SF. 6) PS_STREAM_IU_QOS_NEG_SWITCH: When the switch is on, the Iu QoS Negotiation R99 PS streaming to the PS STREAM service function is applied service bearer primary path if Alternative RAB Parameter Values threshold. R99 PS streaming primary path load IE is present in the RANAP RAB ASSIGNMENT It is one condition for selecting the primary REQUEST or RELOCATION case of the path or secondary path in the REQUEST message. establishment of the PS streaming service. 7) PS_BE_STRICT_IU_QOS_NEG_SWITCH: When the switch is on, the strict Iu QoS Negotiation function is applied to the PS BE R99 PS streaming service bearer secondary service,RNC select Iu max bit rate based on path PS streaming primary secondaryand UE capacity,cell capacity,max bitrate path R99 alternative RAB parameter values in RANAP load ratio threshold. It is one condition for RAB ASSIGNMENT path or secondary path in selecting the primaryREQUEST or RELOCATION establishment of the When the the case of the REQUEST message.PS switch is not on, the streaming service. loose Iu QoS Negotiation function is applied to the PS BE service,RNC select Iu max bit rate based on UE capacity,max bitrate and alternative RAB WCDMA R99 PS streaming service uplink parameter values in RANAP RAB factor ASSIGNMENT REQUEST or RELOCATION REQUEST message,not consider cell capacity,this can avoid Iu QoS Renegotiation between different cell.The switch is valid when PS_BE_IU_QOS_NEG_SWITCH is set to ON.
SET LICENSE(Optional)
SET SLFSLVSW(Optional)
SET ALMPORT(Mandatory)
ADD SNTPSRVINFO(Mandatory)
Number of the port that provides the time information on the SNTP server
SET E1T1(Optional)
ADD UNODEBESN(Mandatory)
ADD UNODEBESN(Mandatory)
Subnet mask of NodeB ETH/TRUNK port This parameter specifies whether MBMS PTM non-streaming bearers can be pre-empted by other MBMS PTM bearers or non-MBMS bearers. This parameter specifies whether MBMS PTM streaming bearers can pre-empt other MBMS PTM bearers and non-MBMS bearers. This parameter specifies whether MBMS PTM streaming bearers can be pre-empted by other MBMS PTM bearers or non-MBMS bearers.
SET URNCMBMSPARA(Optional)
SET URNCMBMSPARA(Optional)
SET URNCMBMSPARA(Optional)
SET E1T1(Optional)
SET E1T1(Optional)
SET E1T1(Optional)
Frame structure
SET ETHPORT(Mandatory)
SET CERTFILE(Optional)
Length of smoothing filter window of period. Identifying the potential user control potential user control (PUC).is high, the cell selection When the cell load and reselection can be periodically modified in order to enable users in unconnected mode to select other cells more easily, thus reducing This parameter specifies the coefficient of the the local cell after the PTP RB admission fails. penalty time load. The penalty time is MCCH modification period multiplied by this parameter. During the penalty time, users in the cell are not allowed to initiate PTP RB requests.
SET URNCMBMSPARA(Optional)
Password
SET PWDPOLICY(Optional)
SET PWRALMSW(Optional)
SET PWRALMSW(Optional)
SET UFRC(Optional)
First alarm switch of power distribution This parameter is monitoring board used to inform the UE of the method for translating the received Transmit Power Control (TPC) commands. In other words, it is used to select UL power control Second alarm switch ofthe ALGORITHM1, the algorithm. When using power distribution monitoring board UE adjusts the uplink transmit power for every timeslot. When using the ALGORITHM2, the UE adjusts the uplink transmit power on a 5timeslot cycle. For details of this parameter, refer to the 3GPP TS 25.214. Minimum DSCP of queue 0. The IP packets with DSCP in a relation that "Min DSCP of queue 0" <= DSCP <= 63 is added to queue 0. Minimum DSCP of queue 1. The IP packets with DSCP in a relation that "Min DSCP of queue 1" <= DSCP < "Min DSCP of queue 0" is added to queue 1.
SET QUEUEMAP(Optional)
SET QUEUEMAP(Optional)
SET QUEUEMAP(Optional)
SET QUEUEMAP(Optional)
SET QUEUEMAP(Optional)
ADD ADJNODE(Optional)
ADD UCELLHCS(Optional)
ADD UCELLSELRESEL(Optional)
ADD UCELLSELRESEL(Optional)
ADD UCELLSELRESEL(Optional)
ADD UCELLSELRESEL(Optional)
ADD U2GNCELL(Optional)
ADD UEXT3GCELL(Mandatory)
Minimum DSCP of queue 2. The IP packets with DSCP in a relation that "Min DSCP of queue 2" set DSCP adjacent node of queue 1" Function <= of the < "Min DSCP supported is addedBSC6900.2. by local to queue When the parameter is set to CS1, it indicates that the The IP packets Minimum DSCP of queue 3.local BSC6900 is interconnected to the adjacent node by using with DSCP in a relation that "Min DSCP of the CS1 protocol version. When the queue 2" queue 3" <= DSCPqueue 4. The IP packets < "Min DSCP of parameter Minimum DSCPindicates that the local set to to queue 3. it of is addedCS2, a relation that "Min DSCP of with DSCP in BSC6900 is interconnected to the adjacent queue 4"using the CS2 protocol version. The node by <= DSCP < "Min DSCP of queue 3" is added to queue 4. The IP packets with CS2 protocol version is backward compatible DSCP inCS1. By default, the DSCP < "Min set with the a relation that 0 <= parameter is DSCP of queue 4" peer is not compatible with to CS2. When the is added to queue 5. the local CS2 messages (the peer does not This parameter defines the CPICH Ec/No process the compatible domain according to access threshold of the cell. The UE can camp protocol requirements), the protocol version is on the cell only when the measured CPICH set to CS1. Ec/No is greater than the value of this parameter. For FDD cells, the cell selection criterion S in the 25.304 protocol is defined as follows: This parameterSqual>0 that in the Quality threshold for HCS reselection. Srxlev>0 AND indicates CELL_FACH connection mode, the Where: measurement hysteresis of the UE is 1. It is - Squal threshold of HCS cell reselection. It Quality = Qqualmeas - Qqualmin in cell used when CPICH RSCP is used - Srxlevused to calculateQrxlevmin level of the = Qrxlevmeas can bebetween the neighboring GSM cell and Offset selection and reselection the quality measurement. Pcompensation indicates that in therules.This This parameter specified cell.notHCS reselection Hthe value is in configured when WCDMA cell is the measured cell quality parameter isor URA_PCH connection mode, - Qqualmeas CELL_PCH This specifies the offset of the measurement 255. namely CPICH Ec/No.of the UE is 1. It value, the measurement hysteresis cell signal value of thethe greater the parameter value is, Otherwise, neighboring GSM used in level - Qrxlevmeas CPICH RSCP is cell RX cell is used when is the measured for RSSI quality. This parameter is used the harder thereselection measurement. This happens. value, namely CPICH RSCP. selection and cell selection subtractedFor measurement.the minimum required quality from This parameterThe offset that3GPP TS 25.304. detailed information, refer to in the - Qrxlevmin is indicates is when the value is parameter is notcell measurement value before the neighboring configured CELL_FACH connection mode, the level in the cell. 255. cell reselection. = measurement hysteresis of the UE is 2. It is - Pcompensation Otherwise, the greater the parameter value is In cellwhen CPICH EcNo is used parameter is, used reselection algorithm, this in cell max(UE_TXPWR_MAX_RACH-P_MAX, 0) the harder thereselection measurement. This used for and cell selectionof a maximum the border happens. For selectionmovingindicates that in cell. Content: - UE_TXPWR_MAX_RACH is the TS 25.304. This parameter the detailed information, or resection, the larger is refer to 3GPP During cell is not configured when the value parameterlevelURA_PCH use when accessing TX power selection CELL_PCH or a UE may connection mode, the value of the parameter, the smaller the 255. cell on RACH, namely the measurement hysteresis of the UE is 2. It probability of selecting the parameter value is, Otherwise, the greater inter-RAT neighboring MaxAllowedULTxPower. is used when CPICH EcNo is used in cell cells. Theisthe cellthe value ofoutput power of the hardersmaller selection happens. For - P_MAX and reselection measurement. This the maximum RF the parameter, selection the probability of selecting inter-RAT the larger detailed information, refer towhen the value is 3GPP TS 25.304. the UE. parameter iscells. This parameter can be neighboring not configured performance: As for 255. the impact on network configured the the network planner according to The larger by greater the parameter is, the Otherwise, the value of the parameter value is, reality. more difficult it is for the UE happens. For camp the harder the cell selection to25.331.on the For details, refer the valueTS the parameter is, to 3GPP of cell. Theinformation, refer to 3GPP TS 25.304. detailed smaller on network performance: As for the impact the UE to camp on the cell. the easier it is for The if the valuevalue of the parameter, is But larger the is excessively small, it the lower thethat the UE of selecting neighboring possible probability cannot receive the system cells. The smaller the PCCPCH. parameter, the messages carried by value the higher this parameter is not setso. any value, When the probability of doing to the UE adopts the corresponding value of the current serving cell, added through the ADD UCELLSELRESEL command. Generally, this parameter is not set to any value.
ADD UCELLSELRESEL(Optional)
ADD UEXT3GCELL(Optional)
ADD UEXT3GCELL(Mandatory)
ADD U2GNCELL(Optional)
ADD UCELLSELRESEL(Optional)
the minimum required RX level The corresponding to CPICH Ec/No.that UE can corresponds to CPICH RSCP. The UE can camp on the cell only when the measured camp on the cell greater than the value of this CPICH Ec/No is only when the measured CPICH RSCP is greater than the value of this parameter. The higher the parameter value is, parameter. the more difficult it is for the UE to reside in the The The lower "Qrxlevmin" and "Qqualmin" cell. settings of parameter value is, the easier it should be considered along with each other. is for the UE to reside in the cell, but it is As for the impact UE networkreceive the system possible that the on cannot performance: This larger the value of the parameter is, the The parameter indicates whether to configure messages that are sent through the PCCPCH. the minimum it is for the UE to camp on the quality level. When it is set to more difficultinformation, refer to the 3GPP For detailed UE adopts the corresponding TS FALSE, the cell. The smaller the value parameter is, 25.304. the current servingof theadded through value of it is for the UE to camp on the cell. cell, the easier the ADD UCELLSELRESEL command. This But if the value is excessively small, it is parameter is generally set toreceive the system possible that the UE cannot FALSE. When it is set to TRUE, the UE adopts the value in messages carried by PCCPCH. ADD UEXT3GCELL command.to any value, When this parameter is not set The minimum the corresponding value of the the UE adoptsrequired RX threshold Minimum RX level of the GSM cell. UE can corresponding to CPICH through the ADD current the UE camps on RSCP. The the Before serving cell, added the measured the camp on the cell only when cell, take UCELLSELRESEL command. Generally,cell. If measurement of greater than the value of this the signal quality in the this CPICH RSCP is parameter is not setthan this parameter, this the quality is better to any value. should be parameter. The setting of Qrxlevmin indicates that the cellThe higher the parameter related to Qqualmin. can obtain better QoS and the UE is allowedis for the UEthisreside in is, the more difficult it to camp on to cell. Otherwise, the UE cannot obtain the easier itin the cell. The lower parameter is, good QoS is thisthe UE todoes not camp on but it is possible for cell and reside in the cell, the cell. that the UE cannot receive the system messages that are sent through the PCCPCH. For detailed information, refer to 3GPP TS 25.304.
ADD UEXT3GCELL(Optional)
This parameter indicates whether the minimum required RX level is extended. Indicating whether the minimum required RX level parameter indicates whether to configure This is extended. For detailed information of this minimum RX level. When it is 25.304. the parameter, refer to 3GPP TS set to FALSE, the UE adopts the corresponding value of the currenttotal number added through Queue length. The serving cell, of users in the ADD UCELLSELRESEL command. This queue of each cell should not exceed the parameter is generallyparameter. When a new value specified in this set to FALSE. user needs queuing, 1) If the selection and Measurement quantity of cell queue has vacancy, the user joins the queue immediately. reselection. It can be set to CPICH Ec/N0 or 2) If theRSCP. For detailed information of this CPICH queue is full and there is a user whose queue time exceeds the allowed maximum parameter, refer to queue is supported. When Indicating whether 3GPP TS 25.304. queue time, this user is out of the queue and a user initiates a call, if cell resources are access fails. At the same time, the new user insufficient and the If the is queue supportive, joins the queue. 3) user queue has a user the RNC tries to arrange this user to join the whose priority is lower than that of the new queue to user in the queue with theratio. user, the increase access success lowest priority is out of the queue and access fails. At the same time, the new user joins the queue. 4)For other situations, the user cannot join the queue.
ADD UCELLSELRESEL(Optional)
ADD UEXT3GCELL(Optional)
ADD UCELLSELRESEL(Optional)
SET UQUEUEPREEMPT(Optional)
SET UQUEUEPREEMPT(Optional) ADD UTYPRABQUALITYMEAS(Mandatory) ADD UTYPRABDCCCMC(Mandatory) ADD UTYPRABHSPA(Mandatory) ADD UTYPRABRLC(Mandatory)
Index number uniquely identifying the configuration of the typical service parameters.
ADD UTYPRABBASIC(Mandatory)
This parameter specifies the index number that identifies the configuration of a typical RAB.
ADD UTYPRABOLPC(Mandatory)
This timer is started whenthe index number that The parameter specifies the RNC initiates the identifies theprocedure. If RAB modify RAB. RAB Modify configuration of a typical message is received from the CN when this timer is actived, the rate information assigned by CN when establishing traffic will be reserved as the new assigned rate is used. Identifying a routing area in a location area for a PLMN of GSM-MAP type. It is defined by the operator. For detailed information of this parameter,No. ofto 3GPP TS 23.003. Sequence refer an available sub channel. A maximum of 12 sub channels (from sub channel 0 to 11) can be selected. For detailed information of this parameter, refer to 3GPP TS 25.214.
SET UCOIFTIMER(Optional) ADD UEXT3GCELL(Mandatory) ADD UEXT2GCELL(Mandatory) ADD UCELLSETUP(Mandatory) ADD UCELLQUICKSETUP(Mandatory) ADD URAC(Mandatory)
ADD UPRACHBASIC(Mandatory)
SET UIUTIMERANDNUM(Optional)
A timer used to wait for the reset response from CN. Identifying the type of the inter-RAT cell When RANrestriction refers that RNC can DL fast TF Sharing Supported, the capacity of NO_CAPABILITY indicates to a situation configure cell the cell is overloadedis not where, when remains unknown. It and the GSM multi-plmn. congested, the to set the TF can be adjusted to recommended downlink cell type to restrict the number of blocks transported in NO_CAPABILITY. If the cell type is each TTI at the MAC layer and the rate of user NO_CAPABILITY, the inter-RAT handover data, thus reducing the cell downlink load. This cannot be triggered. parameter defines the downlink data rate recover timer length in fast TF restriction. RateRstrctTimerLen and RateRecoverTimerLen are effective only to the A timer used to respond to CN reset. is downlink. The uplink fast TF restriction performed by the UE. For the uplink fast TF restriction, the RNC only of a transport The rate matching factor delivers a new TFCS and randomly selects a comparatively bigger channel.For detailed information of this time length refer to 3GPP TS 25.212. parameter, in the signaling value scope. The UE automatically release the TF restriction once the time expires. The higher RateRecoverTimerLen is, the more slowly the This parameter defines the rate the lower BE service rate recovers, while matching factor of the RACH. probability that the overload is triggered again in a short period. The lower RateRecoverTimerLen is, the more quickly the BE service rate is recovered, but more overloads occur.
SET UOPERATORSHARINGMODE(Optional)
ADD UEXT2GCELL(Mandatory)
SET UIUTIMERANDNUM(Optional)
ADD URACH(Optional)
ADD UCELLOLC(Optional)
ADD UCELLOLC(Optional)
data, thus reducingthe time length of the This parameter defines the cell downlink load. parameter defines the restriction. downlink OLC fast TF downlink data rate restrict coefficient in fast TF restrict The RateRstrctTimerLen and smaller this parameter is, the larger the TF the RateRecoverTimerLen are effective only to restrict effect. The lower the parameter is the downlink. The uplink fast TF restriction is, more severe the rate is restricted. An performed by the UE. For the uplink fast TF excessive low parameter delivers a new TFCS restriction, the RNC only value, however, may affect the BE transmission delay. A high and randomly selects a comparatively bigger parameter value means loose restriction,The time length in the signaling value scope. which may be ineffective in alleviating the UE automatically release the TF restriction overload.time expires. The higher once the RateRstrctTimerLen is, the more slowly the BE service rate decreases. The rollback point. The LASTRBP indicates the last lower RateRstrctTimerLen is, the harder it is to system automatically takes the position where receive the configuration command is executed the current overload release instruction. as the rollback point, and the user does not need to specify a rollback point. APPOINTRBP indicates the rollback point specified by the user. A timer used to wait for the RB reconfiguration response from UE in the RB procedure.Refer to the Note. Type of recording the execution result A timer to RNC wait for the RB release 1. REC_ALL: indicating RB procedure.R response from UE in thethat the execution results theall the commands are recorded no efer to of Note. matter whether the commands are executed successfully. A timer to RNC wait for the RB setup response 2. REC_ERR: indicating that only the from UE inresults of failed commands are execution the RB procedure.Refer to the Note. recorded. 3. REC_NON: indicating that the execution results of all the commands are not recorded no matter whether the commands are executed successfully. of the logical port. Speed reduction efficient When detecting link congestion through IPPM, the system reduces the bandwidth rate of the logical port by using the value of the bandwidth multiplied by this parameter. DL fast TF restriction refers to a situation where, when the cell is overloaded and congested, the downlink TF can be adjusted to This parameter specifies the transported in restrict the number of blocks interval between recounting operations. each TTI at the MAC layer and the rate of user data, thus reducing the cell downlink load. This parameter defines the downlink OLC fast TF rate recovery coefficient. The greater this parameter is, the larger the TF restrict effect.
ADD UCELLOLC(Optional)
BEG FORWARD(Mandatory)
SET USTATETIMER(Optional)
SET USTATETIMER(Optional)
SET USTATETIMER(Optional)
RUN BATCHFILE(Optional)
ADD IPLOGICPORT(Optional)
SET URNCMBMSPARA(Optional)
ADD UCELLOLC(Optional)
ADD IPLOGICPORT(Optional)
ADD BRD(Mandatory)
ADD UCELLDRD(Optional)
This parameter specifies the target frequency band in the redirection process.
SET UDRD(Optional)
This parameter specifies the target frequency band in the redirection procedure. This parameter specifies the frequency band of the target UL and DL UARFCNs to which the UE is redirected. When the UL load state or DL load state of the serving cell is LDR(basic congestion) or This parameter specifies the frequency band of OLC(overload congestion), a UE may be the target UL another cell accordingwhich the redirected to and DL UARFCNs to to the UE is redirected.parameter specifies the traffic type. This state or DL load state of the When the UL load possibility ofis LDR(basic congestion) or cell. serving cell redirecting the UE to another When this parameter is set to UEthe RRC OLC(overload congestion), a 0, may be redirection to another cell according to the on redirected is not performed if the load state the serving Thisis LDR or OLC. traffic type. cell parameter specifies the possibility load of the serving cell is within the When the of redirecting the UE to another cell. When this parameter is set to 0, the RRC normal range, a UE may be redirected to redirection is not performed iftraffic type. This another cell according to the the load state on the servingspecifies theor OLC. parameter cell is LDR possibility of This parameter specifies whether the RRC redirectingload UEthe another cell is within the cell. When this When the the of to is valid for the specified redirection algorithm serving redirection parameter is set UE0, the be redirected to is to may RRC normal range, a algorithm is valid only when traffic type. The the load of the serving cell is not performed if another cell according to the traffic type. This the DR_RRC_DRD_SWITCH is enabled and within the normal range.possibility of parameterparametertheset to when this specifies is redirecting the UE to another cell. When this ONLY_TO_INTER_FREQUENCY or parameter is set to 0, the Valueredirection is ONLY_TO_INTER_RAT. RRC OFF indicates not performed if the load of allowed. Value is that RRC redirection is not the serving cell within the normal range. ONLY_TO_INTER_FREQUENCY indicates that only the RRC redirection to an interfrequency cell is allowed. Value ONLY_TO_INTER_RAT indicates that only the RRC redirection to an inter-RAT cell is allowed.
ADD UCELLREDIRECTION(Optional)
SET UREDIRECTION(Optional)
ADD UCELLREDIRECTION(Optional)
SET UREDIRECTION(Optional)
ADD UCELLREDIRECTION(Optional)
SET UREDIRECTION(Optional)
ADD UCELLDRD(Optional)
This parameter specifies the target downlink UARFCN of a cell for RRC redirection.
SET UDRD(Optional)
This parameter specifies the target downlink UARFCN of a cell for RRC redirection. This parameter specifies the target DL UARFCN for the RRC redirection. Different values of RedirBandInd correspond to different value ranges of the UARFCN.
ADD UCELLREDIRECTION(Optional)
SET UREDIRECTION(Optional)
ADD UCELLDRD(Optional)
SET UDRD(Optional)
ADD UCELLREDIRECTION(Optional)
SET UREDIRECTION(Optional)
ADD UCELLDRD(Optional)
SET UDRD(Optional)
BandIndNotUsed: [0 - 16383] Band6: Uplink UARFCN if the DL UARFCN is BAND8, or BAND9, and = Downlink UARFCN 225 range: 0 - 16383 Value 225 then the target UL UARFCN of the valid, UL UARFCN is not manually set, if Band9: Uplink UARFCN = Downlink UARFCN If the Band7: Uplink UARFCN = Downlink UARFCN redirection is automatically configured 475 RedirBandInd is set to BAND1, BAND2, 225 according frequency belongs to special -If the DL to the following principles: UARFCN BAND3, BAND4, BAND5, BAND6, BAND7, Band8: Uplink UARFCNcommon UARFCN, the = Downlink If the DL UARFCN frequencies, then is a if the DL UARFCN is BAND8, or BAND9, and 225 relation between the UL UARFCN ofUARFCN Band2: Uplink UARFCN UARFCN and the DL valid, then the target UL = Downlink the RRC Band9: Uplink UARFCN = Downlink UARFCN UARFCN is as follows: 400 redirection is automatically set according to 475 parameter specifies DL UARFCN - 950 the This BAND1: = the Band4:DL frequency belongstarget DL following UL UARFCN redirection. Different - If the Uplink UARFCN = Downlink UARFCN to UARFCNprinciples: = DL UARFCN - 400 for the RRC BAND2: UL UARFCN a commonspecial 225 DL UARFCN is If the UARFCN, frequencies, then values ofUL UARFCN = correspond to- differentRedirBandInd DL UARFCN 225 the BAND3:between the UL = Downlink UARFCN Band5: Uplink UARFCN UARFCN and the DL relation Uplink UARFCN = Downlink UARFCN Band2: UL UARFCN = DL UARFCN - 225 value ranges of the UARFCN. BAND4: is as follows: 225 UARFCN 400 BAND5: UL UARFCN = = Downlink UARFCN Band6: Uplink UARFCN DL UARFCN --225 BAND1: UL UARFCN = = Downlink UARFCN DL UARFCN 950 Band4: Uplink UARFCN DL UARFCN - 225 BAND6: UL UARFCN = DL UARFCN - 400 225 BAND2: UL UARFCN = 225 BAND7:Uplink UARFCN DL UARFCN - 225 Band7: Uplink UARFCN DL UARFCN - 225 BAND3: UL UARFCN = = Downlink UARFCN Band5: UL UARFCN = DL UARFCN - 225 = Downlink UARFCN BAND8: UL UARFCN = DL UARFCN - 225 225 BAND4: UL UARFCN = 225 BAND9: UL UARFCN = DL UARFCN - 475 BAND5: UL UARFCN = = Downlink UARFCN Band6: Uplink UARFCN DL UARFCN - 225 If the DL UL UARFCNa=special UARFCN, the BAND6: UARFCN is DL UARFCN - 225 225 relation between the UL DL UARFCN - the DL BAND7: UL UARFCN = UARFCN and 225 Band7: Uplink UARFCN = Downlink UARFCN UARFCN is as follows: DL UARFCN - 225 BAND8: UL UARFCN = 225 BAND2: UL UARFCN = DL UARFCN - 400 BAND9: UL UARFCN = DL UARFCN - 475 BAND4: UL UARFCNa=special UARFCN, the DL UARFCN - 225 If the DL UARFCN is BAND5:between the UL DL UARFCN - the DL UL UARFCN = UARFCN and 225 relation BAND6: UL as follows: DL UARFCN - 225 UARFCN is UARFCN = BAND7: UL UARFCN = DL UARFCN - 225 BAND2: UL UARFCN = DL UARFCN UL This parameter specifies whether the - 400 BAND4: UL UARFCN =cell of redirection needs frequency of the target DL UARFCN - 225 BAND5: UL UARFCN = DL UARFCN - 225 to be configured. BAND6: TheUARFCN = DL needs to be225 - TRUE: UL UL frequency UARFCN BAND7: UL UARFCN = DL UARFCN - 225 configured. This parameter specifies whether the UL - FALSE: The ULtarget cell of redirection needs frequency of the frequency does not need to bebe configured.is configured automatically to configured. It according to the relationship between UL and - TRUE: The UL frequency needs to be DL frequencies. configured. - FALSE: The UL frequency does the targetto This parameter specifies whether not need UL be configured. It is the UE is redirected should UARFCN to which configured automatically according to the relationshipindicates that and be configured. Value TRUE between UL the DL frequencies. UL UARFCN needs to be configured. Value FALSE indicates that the whether the target UL This parameter specifies UL UARFCN need not be manually configured and it is UARFCN to which the UE is redirected should automatically configured according to that the be configured. Value TRUE indicates the relation between theto be configured. Value UL UARFCN needs UL and DL UARFCNs. FALSE indicates that the UL UARFCN does not need to be manually configured and it is automatically configured according to the relation between the UL and DL UARFCNs.
ADD UCELLREDIRECTION(Optional)
SET UREDIRECTION(Optional)
SET CLK(Optional)
Port for output LINE1(The actual value range may differ on the LMT )
SET CLK(Optional)
Back-up port for output LINE(The actual value range may differ on the LMT )
SET CLK(Optional)
SET CLK(Optional)
SET CLK(Optional)
SET UCALLSHOCKCTRL(Optional)
SET UPOOLPRIMHOSTPOLICY(Optional)
Whether to use SGSN clock source.Only the Gb interface board needs to set this parameter. If the SGSN clock and the MSC Switch of panel BITS2(2M) clock have different clock sources, the MSC clock must use the clock source of the SGSN clock. If the two clocks use the same clock source, this parameter does not need to be This set. parameter specifies re-host policy type for NodeB. The value "REHOSTRIGHTNOW" Indicates to perform re-host policy by fach indicates whether register beared for the under call shock control. This function only NodeB immediately when the RNC recovers applies under NodeB level or cell level call from disaster. The value "REHOSTDELAY" shock control. indicates to perform re-host policy for the NodeB after a specified delayed period when the RNC recovers from disaster. The value "REHOSTWHEN" indicates to perform re-host policy for the NodeB at a specific time. This timer is started when an AAL2 signaling entity sends the peer node an indication for releasing an AAL2 connection.
SET AAL2TMR(Optional)
SET USTATETIMER(Optional)
SET USTATETIMER(Optional)
A timer to RNC wait for the relocation command message in relocation procedure.
SET USTATETIMER(Optional)
A timer to RNC wait for rnsap relocation commit message in relocation procedure.
SET USTATETIMER(Optional)
SET USTATETIMER(Optional)
A timer to DRNC wait for Iu release command in the failed relocation procedure.
SET USTATETIMER(Optional)
A timer to RNC wait for the Iu release command message in relocation procedure.
SET USTATETIMER(Optional)
SET USTATETIMER(Optional)
SET USTATETIMER(Optional)
SET AAL2TMR(Optional)
triggered without the intra-frequency reporting event reported, when the quality of the cell in the active set fulfills the following conditions. The formula of direct SHO rate reduction is new > Mbest_cell - RelThdForDwnGrd where Mnew: the CPICH Ec/No measurement value of the failed cell1 A timer to RNC wait for the response to Mbest_cell: the CPICH Ec/No measurement physical the latestreconfiguration report of the value in channel measurement in relocation procedure. best cell identified by the RNC according to 1D RelThdForDwnGrd: the relative threshold for direct rate reduction. It can be configured on the OMU server. A timer to RNC wait for inter-RAT handover Note: The in relocation procedure. completionsmaller the value of this parameter, the harder it is to trigger SHO rate reduction, but the greater intra-frequency interference This timer is started when annot joinsignaling caused by the cell that does AAL2 the active entity sends thepossibility of call drops. On the set, the greater peer node a request for releasing the AAL2 connection. this parameter, contrary, an larger the value of the easier it is to trigger SHO rate reduction which ensures the signal quality. But, frequent triggering of SHO rate reduction may affect the use of the services.
Remark
ADD ATMTRF(Optional)
ADD IPRT(Mandatory)
SET URNCCBPARA(Optional)
SET URNCCBPARA(Optional)
This parameter specifies the reporting period Purpose 1A. That is, of the route reported at of event description event 1A is record each reporting interval. Usually, event 1A is reported only once. Nevertheless, if the cell, This parameter specifies the number of where event 1Aof event 1C for periodical the reporting times is reported, does not join active set in a specified 1C is of time, at UE Repeat Number ofevent periodreported theeach reporting. That is, send Write-Replace. can change the reporting of event 1A into reporting interval. Usually, event 1C is reported periodical mode.to avoid missing of where only once. Nevertheless, the number of This parameter specifies if the cell, of this cell measurement reports. The not join the active event 1C times of event 1J event 1A reported, does for periodical reporting isfor [PeriodMRReportNumfor1A] is reported set in a Period of send Write-Replace. at each of is Repeat specified period interval as the set reporting. Thatreporting 1J time, the UE can times with the is, event event reported change the reporting of 1C into reporting interval. Usually, event 1J is reported value. periodical mode.to avoid missing of where only once. Nevertheless, if the cell, selected, When NON_PERIODIC_REPORT is of this cell measurement reports. Thenot join the EDCH event 1J is reported, does event 1C of event the UE can for [PeriodMRReportNumfor1C] is reported not change the reporting the UE active set in a specified period of time, 1A into periodical. times with the reporting interval as 1J into can change the reporting of event the set value. periodical mode.to avoid missing of When NON_PERIODIC_REPORT isof this cell measurement reports. The event 1J selected, the UE can for [PeriodMRReportNumfor1J] is reported not change the reporting of event 1C into periodical. times with the reporting period as the set value. When NON_PERIODIC_REPORT is selected, the UE can not change the reporting of event 1J into periodical.
ADD UTYPRABBASIC(Mandatory)
This parameter specifies the minimum capability of the 2G cell required by inter-RAT handovers from 3G networks to 2G networks. If the capability of the 2G cell does not meet the requirement, the handover will not be performed. In terms of the ability to support PS services, EDGE cells rank first, GPRS cells second, andthreshold for resource auditing CPU usage GSM cells third. control. When the average CPU usage of sliding windows reaches or exceeds the threshold, resource auditing control is triggered. Packet queue usage threshold for resource auditing control. When the average packet queue usage of sliding windows reaches or exceeds the threshold, resource auditing control is triggered. for recovery from CPU usage threshold resource auditing control. When the average CPU usage of sliding windows is lower than the threshold, resource auditing control is stopped. Packet queue usage threshold for recovery from resource auditing control. When the average packet queue usage of sliding windows is lower than the threshold, resource auditing control is stopped.
SET FCCPUTHD(Optional)
SET FCMSGQTHD(Optional)
SET FCCPUTHD(Optional)
SET FCMSGQTHD(Optional)
SET FCSW(Optional)
SET UCORRMALGOSWITCH(Optional)
CORRM Algo reserved switch 0. The switch is reserved for further change request use.
SET UCORRMALGOSWITCH(Optional)
CORRM Algo reserved switch 1. The switch is reserved for further change request use. CORRM Algo reserved U32 para 0. The para of 32 bits is reserved for further change request use. CORRM Algo reserved U32 para 1. The para of 32 bits is reserved for further change request use. CORRM Algo reserved U8 para 0. The para of 8 bits is reserved for further change request use. CORRM Algo reserved U8 para 1. The para of 8 bits is reserved for further change request use.
SET UCORRMALGOSWITCH(Optional)
SET UCORRMALGOSWITCH(Optional)
SET UCORRMALGOSWITCH(Optional)
SET UCORRMALGOSWITCH(Optional)
SET PWDPOLICY(Optional)
Interval for resetting the counter when the user fails to log in This timer is started when an AAL2 signaling entity sends the peer node a request for resetting an AAL2 path.
SET AAL2TMR(Optional)
ADD PPPLNK(Optional)
ADD MPLNK(Optional)
ADD UCELLDSACMANUALPARA(Mandatory)
ADD UTYPRABRLC(Optional)
SET UFRC(Optional)
ADD SUBTSK(Optional)
ADD UTYPRABRLC(Mandatory)
Specifies the mode of restricting the access This parameter specifies the filter coefficient classes. for RLC retransmission ratio measurement. The filter coefficient is mainly used to smooth the original measurement result. Smaller filter coefficient means that original measurement Restoration type of the alarm0 means that result is less smoothed, and original measurement result is not smoothed at all. Note: this parameter is only used in rate adjustbit indicates whether TCP, and is not Each algorithm based on to retry the used in RLC flow control algorithm. a bit is set corresponding HSPA the scheduled subtask Interval for executing technology. If This parameter specifies the work mode of the 1, unit isthe RNC retries the corresponding The then according to the time RLC entity. determined UE is not using the HSPA technology if the mode.Acknowledged Mode. Automatic Repeat - AM: correspondingmode is set to "DAILY_T" or 1. If the time HSPA technology. Otherwise, Request (ARQ) is used in error correction. no retry is performed. day. "DAILY_C", the unit is Mode. Retransmission - UM: Unacknowledged is2. If the time mode is set to "WEEKLY_T" or not applied. According to the configuration, "WEEKLY_C", the unitdiscarded or marked. the data with errors is is week. - 3. If the time mode is setNo "MONTHLY_T" or TM: Transparent Mode. to protocol "MONTHLY_C", the unit is month. overhead is added to the higher-layer data. The protocol data units with errors may be discarded or marked. For details of this parameter, refer to the 3GPP TS 25.322.
SET E1T1LOP(Optional)
The loopback channel number when the port loopback mode is set to TDM remote loopback
ADD UCELLRLPWR(Mandatory)
ADD UCELLRLPWR(Mandatory)
This parameter defines the RLC size corresponding to each transport format. For a This parameter shouldRLC size reflects the the maximum common channel, the consider coverage This parameter should fulfill the dynamic downlink transmit actual transportthepower and the block size. For detailed the requirement of control, andplanning, and network the value is range of power information of this parameter, refer topower]. If value is to [PCPICH transmit transmit Since the relative to [PCPICH power]. 3GPP relative TS 25.322. the parameter is excessively high, set to 15 dB, dynamic range of power control is downlink interference may recommended as [RL Max this parameter is occur. If the parameter is excessively low,15 dB. If the parameter value DL TX power] - the downlink power control may be affected. For detailed information of is excessively low, the transmit power may this parameter, refer low because 25.433. become excessively to 3GPP TS of incorrect estimation of SIR. If the parameter value is excessively high, the downlink power control may be affected. For detailed information of this parameter, refer to 3GPP TS 25.433. A timer to RNC wait for the response to radio link reconfiguration prepare in the radio link procedure. A timer to RNC wait for the response to radio link deletion request in the radio link procedure.
SET USTATETIMER(Optional)
SET USTATETIMER(Optional)
SET USTATETIMER(Optional)
A timer to RNC wait for radio link restoration indication in the radio link procedure.
SET USTATETIMER(Optional)
A timer to RNC wait for the response to radio link setup request in the radio link procedure.
ADD GPS(Mandatory)
ADD URNCBASIC(Mandatory) ADD USMLCCELL(Mandatory) ADD UINTRAFREQNCELL(Mandatory) ADD UINTERFREQNCELL(Mandatory) ADD UCELLINTRAFREQHO(Mandatory) ADD U2GNCELL(Mandatory)
ADD UCBSADDR(Mandatory)
ADD URNCPOOL(Mandatory)
ADD UNRNC(Mandatory)
SET CERTFILE(Optional)
ADD IPLOGICPORT(Optional)
Speed reduction alarm report threshold This minimum number of RRC connection The parameter specifies the cause of RRC connection establishment, that is, the value of request per CPUS to report KPI alarm. In a the Establishment the number of RRC checking period,if cause IE in the RRC CONNECTION REQUEST message. threshold connection request is higher than the and the RRC connnection setup successful ratio is lower RRC the related threshold,the KPI Threshold of than connection setup successful alarm of RRC connectionKPI alarm. In a ratio per CPUS to report setup ratio is reported. period,if the ratio is lower than this checking threshold and the number of RRC connection request is higher than the related threshold,the KPI alarm of RRC connection setup ratio is reported. Wait time in RRC connection reject message, the time period the UE has to wait before repeating the rejected procedure of RRC connection
SET URRCESTCAUSE(Mandatory)
SET UKPIALMTHD(Optional)
SET UKPIALMTHD(Optional)
SET USTATETIMER(Optional)
SET USTATETIMER(Optional)
A timer used to wait for initial direct transmission. A timer used to wait for the Iu release command message responding to Iu release request message.
SET USTATETIMER(Optional)
SET USTATETIMER(Optional)
A timer used to wait for the respons e to paging type 1 in RRC procedure.
SET USTATETIMER(Optional)
SET USTATETIMER(Optional)
A timer used to wait for the acknowledgement of radio link control (RLC) completion in RRC procedure. A timer to RNC wait for the response to security mode command from UE in security mode procedure. A timer used to wait for RRC connection setup complete message from UE in RRC procedure.
SET USTATETIMER(Optional)
SET USTATETIMER(Optional)
ADD AAL2PATH(Mandatory)
Resource group number of the PATH The parameter indicates whether the resource group is shared or is used by a specific telecom carrier.
ADD RSCGRP(Mandatory)
ADD ATMLOGICPORT(Optional)
ADD IPLOGICPORT(Optional)
Resource management mode of logical port Resource management mode. The logical port working in the SHARE mode can be shared by multiple carriers. The logical port working in the EXCLUSIVE mode can be used by only one carrier.
ADD UNODEB(Optional)
Indicating the resource management mode. Name of the result file generated after the command locking the If this parameter reason for is executed.configuration and is not specified, the controlof the result file is management name rights. automatically generated in the format of BATCH_RST_YYYYMMDDHHNNSSmmm. The result file is located in the ftp directory in the main area of the OMU, and you should not No response when entering the name. The flag add the path timer of the main area can be queried through the "LST OMUAREA" command. The characters (@, #, !, %, ^, &, *, [, ], /, \, ', and ") cannot appear in the file name.
LCK CMCTRL(Mandatory)
ADD SAALLNK(Optional)
RUN BATCHFILE(Optional)
ADD OPC(Optional)
Whether to enable the restart function The times of resending the reset message to CN after the response is not received upon the expiry of the timer.
SET UIUTIMERANDNUM(Optional)
This parameter is saved for the coming usage. The algorithms with the above values represent are as follow: RSVDBIT1: Control RTWP Anti-interfence Reserved parameter 1. algorithm RSVDBIT2~RSVDBIT16:Reserved Switch If RSVDBIT1 is selected, the corresponding algorithms will be enabled; otherwise, disabled.
ADD UCELLALGOSWITCH(Optional)
ADD UNODEBALGOPARA(Optional)
Reserved Parameter1.
SET UCACALGOSWITCH(Optional)
Reserved Parameter1.
SET TRANSPATCHPARA(Optional)
SET UDPUCFGDATA(Optional)
SET TRANSPATCHPARA(Optional)
SET UDPUCFGDATA(Optional)
SET UDPUCFGDATA(Optional)
SET UDPUCFGDATA(Optional)
SET UDPUCFGDATA(Optional)
SET UDPUCFGDATA(Optional)
SET UDPUCFGDATA(Optional)
SET UDPUCFGDATA(Optional)
Reserved parameter 2.
ADD UCELLALGOSWITCH(Optional)
Reserved parameter 2
ADD UNODEBALGOPARA(Optional)
Reserved parameter 2.
SET UCACALGOSWITCH(Optional)
Reserved parameter 2.
SET TRANSPATCHPARA(Optional)
SET UDPUCFGDATA(Optional)
ADD UCELLALGOSWITCH(Optional)
Reserved parameter 3
ADD UNODEBALGOPARA(Optional)
Reserved parameter 3.
SET UCACALGOSWITCH(Optional)
Reserved parameter 3.
SET TRANSPATCHPARA(Optional)
SET UDPUCFGDATA(Optional)
SET TRANSPATCHPARA(Optional)
SET UDPUCFGDATA(Optional)
SET TRANSPATCHPARA(Optional)
SET UDPUCFGDATA(Optional)
SET TRANSPATCHPARA(Optional)
SET UDPUCFGDATA(Optional)
SET TRANSPATCHPARA(Optional)
SET UDPUCFGDATA(Optional)
SET TRANSPATCHPARA(Optional)
SET UDPUCFGDATA(Optional)
SET TRANSPATCHPARA(Optional)
SET MSP(Optional)
Recovery mode of the MSP protection group Routing context. The routing context identifies a specified route. If the routing context is to be configured, its value must be negotiated between the two ends. Proportion of the RTCP bandwidth in the Iu CS bandwidth. For example, when the value is 1, it indicates that the allocated RTCP path bandwidth is 1% of the RTP path bandwidth. Timer for state transition from CPC to E_FACH of real-time services, used to check whether the UE in the CELL_DCH(with CPC) state with real-time services is in the stable low activity state. for state transition from CPC to FACH of Timer This parameter is valid only when CNDomainId real-time"CS_DOMAIN" and TnlBearerType is is set to services, used to check whether the UE to the CELL_DCH(with this parameter is set set in "IP_TRANS". When CPC) state with real-timethe performance data such as the to "ON", services is in the stable low activity state. of lost packets, rate of lost packets, number round trip time (RTT), delay jitter on each IP path are calculated according to the RTCP message. The information is then analyzed for evaluating the network operating status.
ADD UCNNODE(Optional)
SET UUESTATETRANSTIMER(Optional)
SET UUESTATETRANSTIMER(Optional)
ADD UCNNODE(Optional)
ADD OMUIPRT(Mandatory)
destination IP address.
ADD OMUIPRT(Mandatory)
SET UUESTATETRANSTIMER(Optional)
routing mask. transition from DCH or HSPA to Timer for state E_FACH of real-time services, used to check whether the UE in the CELL_DCH state with real-time services is in the stable low activity state.
SET UUESTATETRANSTIMER(Optional)
Timer for state transition from DCH or HSPA to FACH of real-time services, used to check whether the UE in the CELL_DCH state with real-time services is in the stable low activity state. Pending time after the traffic volume event 4B for state transition from DCH or HSPA to FACH transition is reported. This parameter is used to prevent too many traffic volume events 4B being reported. This parameter is used to check whether the UE in the low activity state. If the UE is on DCH or HSPA channel, the low activity counter When the traffic volume is below the 4B increases and1remains so for thevolume event threshold by every time traffic period 4B is reported. parameter, the event 4B is specified by this reported. This parameter prevents unnecessary traffic volume events that are caused by traffic volume instability from being triggered. This parameter specifies the threshold of the traffic volume of 4A event for triggering the transition of real-time services from E_FACH to This parameter specifies the occurrence time HSPAeventCPC technology. transition of realof 4A with for triggering the time services from E_FACH to HSPA with CPC technology. This parameter prevents unnecessary reports that are caused by traffic volume instability from being triggered. This parameter specifies the threshold of the traffic volume of 4A event for triggering the transition of real-time services from E_FACH to This parameter specifies the occurrence time DCH or HSPA. triggering the transition of realof 4A event for time services from E_FACH to DCH or HSPA. This parameter prevents unnecessary reports that are caused by traffic volume instability from being triggered. This parameter specifies the threshold of the traffic volume of 4A event for triggering the transition of real-time services from FACH to This parameter specifies the occurrence time HSPAeventCPC technology. transition of realof 4A with for triggering the time services from FACH to HSPA with CPC technology. This parameter prevents unnecessary reports that are caused by traffic volume instability from being triggered. This parameter specifies the threshold of the traffic volume of 4A event for triggering the transition of real-time services from FACH to This parameter specifies the occurrence time DCH or HSPA. triggering the transition of realof 4A event for time services from FACH to DCH or HSPA. This parameter prevents unnecessary reports that are caused by traffic volume instability from being triggered.
SET UUESTATETRANS(Optional)
SET UUESTATETRANS(Optional)
SET UUESTATETRANS(Optional)
SET UUESTATETRANS(Optional)
SET UUESTATETRANS(Optional)
SET UUESTATETRANS(Optional)
SET UUESTATETRANS(Optional)
SET UUESTATETRANS(Optional)
SET UUESTATETRANS(Optional)
SET UUESTATETRANS(Optional)
SET UUESTATETRANS(Optional)
ADD SCTPLNK(Optional)
It is used to calculate the round-trip time of the protocol stack and the RTO value. The value must be smaller than "RTOBETA". In the case of the fixed value of the "RTOBETA", the larger the value to calculatethe link delay sensitivity It is used is, the less the round-trip time of the is. protocol stack and the RTO value. The value must be greater than "RTOALPHA". In the case of the fixed value of the "RTOALPHA", the larger the value is, the less the link delay sensitivity is. When the "RTOMIN" and "RTPMAX" parameters are set to fixed values, the larger the value is, the longer the check of the link is. When the "RTOMIN" parameter is set to a fixed value, the larger the value is, the longer the check of the link is. When the "RTOMAX" parameter is set to a fixed value, the larger the value is, the longer the check of the link is.
ADD SCTPLNK(Optional)
ADD SCTPLNK(Optional)
ADD SCTPLNK(Optional)
ADD SCTPLNK(Optional)
ADD AAL2RT(Optional)
ADD IPLOGICPORT(Optional)
Route logical number Logical port speed increase step. When detecting the available bandwidth increase through IPPM, the system increases the bandwidth of the logical port by usingperiod. Bandwidth increase step adjustment this parameter. This parameter indicates the period to increase the bandwidth of the logical port. Note that the actual bandwidth increase step adjustment period is the packet drop ratio Statistics period multiplied by this parameter value.
ADD IPLOGICPORT(Optional)
ADD IPPATH(Mandatory)
ADD RSCGRP(Mandatory)
Receive bandwidth
ADD ATMLOGICPORT(Mandatory)
ADD SAALLNK(Mandatory)
ADD AAL2PATH(Mandatory)
ADD IPOAPVC(Optional)
ADD VPCLCX(Mandatory)
SET UHOCOMM(Optional)
When the time difference between the time when the UE receives a physical frame from RX traffic record index of the AAL2 Path on the the downlink and the time when the UE out BSC6900 physical frame toPVC uplink The transmits the port (ATM layer the traffic). traffic index is configured in the ATM trafficthe becomes greater than a certain threshold, table (see "LST ATMTRF"). event 6F will be triggered. This parameterdifference between the time When the time is to optimize the power control performance within a time slot, that is, to when the UE receives a physical frame from guarantee that the power controlthe UE a time the downlink and the time when within slot is implemented based on all links in the Receivingthe physical frame to the uplink transmits traffic index active set.smaller than a Rx-Tx time difference becomes The ideal UE certain threshold, the should bewill bechips. event 6G 1024 triggered. This parameter is to This parameter should not be too close to optimize the power control performance within 1024. Otherwise, the guaranteemay be power radio link a time slot, that index Receiving trafficis, to of the lowthat the end VPL/VCL removed prematurely. is implemented based control within a time slot It isall links in the active the parameter UE set on recommended that set. The ideal be Rxwithin the range 1024~1280. 1024 chips. This Tx time difference should be For the definition and its related details, refer parameter should not be too close to 1024. to the 3GPP TS 25.331 protocol. removed Otherwise, the radio link may be prematurely. It is recommended that the parameter be set within the range 768~1024. Forsending value. It isits synchronizationrefer S1 the definition and a related details, status to the 3GPP TS 25.331 protocol. byte used by the local end to examine the quality of the received clock signals before the local end switches to a clock source with higher quality. The smaller the value of S1 is, the lower the clock quality is.
SET UHOCOMM(Optional) ADD MTP3LNK(Mandatory) ADD SAALLNK(Mandatory) SET OPT(Optional) ADD ADJNODE(Mandatory) LOP VCL(Mandatory) SET VCLLOP(Optional) ADD UCCP(Mandatory) ADD UNCP(Mandatory)
ADD SAALLNK(Mandatory)
SET MTP3TMR(Optional) ADD UCZ(Mandatory) ADD UCELLSETUP(Mandatory) ADD UCELLQUICKSETUP(Mandatory) ADD USAC(Mandatory)
ADD UNODEB(Optional)
ADD USCCPCHBASIC(Optional)
SAAL link number of the XPU board. This number identifies between the SCCPCH and Sequential offset an SAAL link uniquely. PCCPCH in the cell. As defined by the 25.211 protocol, type of the SAAL 7680 chips prior Interface the PICH timing islink. The interfaceto its corresponding SCCPCH frame timing. If the type of the Iub interface is UNI. The interface offset of the SCCPCH timing from the type of the Iu and Iur interface link is NNI. PCCPCH timing is smaller than 30 compose MCC,MNC,LAC and SAC together (x 256 chips), the Area ID (SAI). SAI decreases by the Servicecorresponding CFN = MCC || MNC This timer is difference between the PICH an 1. Then, the a protection used to define an || LAC || SAC. The SAI is timer waiting for CFN SAAL response of one or more cells in is 2. and the corresponding SCCPCH CFN the area composed after a link setup request is sent to thein the 25.435 protocol, called service However, SAAL. This area is the PI same location area. information indicates the location of area, which and paging message area UE to transmitted with two consecutive CFNs. the CN. This parameter is defined by theIn the RNC, the PI detailed information of this operator. Forinformation and paging messages are also transmitted with two consecutive parameter, refer to 3GPP TS 23.003. CFNs irrespective of the chip offset. Therefore, the two protocols conflict with each other in this aspect. To avoid the compatibility problem, Indicating whether the Iub interface supports it is recommended that the SCCPCH timing satellite transmission. carrying the PCH transport channel be set to between 31 and 149. For detailed information of this parameter, refer to 3GPP TS 25.433.0 : 0chip, 1: 256chip, 2: 512chips, ..., 149 : 38144chips.
ADD ATMTRF(Optional)
ADD USCCPCHBASIC(Mandatory)
Command string of the scheduled subtask. This command can be only a service command, and the system command cannot be added to the scheduled subtask. Scrambling code of the SCCPCH. 0: primary scrambling code; 1~15: secondary scrambling code. Note: This parameter must be set to the primary scrambling code for the SCCPCH Averagethe PCH. It can be set to the primary bearing rate of the ATM traffic scrambling code or secondary scrambling code for the SCCPCH that does not carry the PCH. For detailed information of this parameter, refer to 3GPP TS 25.433.
SET E1T1(Optional)
Scramble switch
SET OPT(Optional)
Scramble switch
EXP ALMLOG(Optional) STA ALMLOG(Optional) ADD SCTPLNK(Mandatory) ADD M3LNK(Mandatory) ADD UCCP(Mandatory) ADD UNCP(Mandatory)
SCTP link number of XPU board. This number identifies an SCTP link uniquely.
ADD SUBTSK(Mandatory)
EXP ALMLOG(Optional)
Start date of the alarm record. By default, the start date is 2000-01-01.
STA ALMLOG(Optional)
Start date of the alarm record. By default, the start date is 2000-01-01.
SET ALMCAPACITY(Optional)
SET MSP(Optional)
SET TZ(Mandatory)
SET MSP(Optional)
Enable SD
SET MSP(Optional)
Specifies the SF and SD event priority Seed of the pseudo-random sequence generator. It can prevent idle period of different NodeBs from overlapping.
ADD UIPDL(Mandatory)
STR UNODEBDETECT(Optional)
Whether to detect all NodeBs configured or a single NodeB. This parameter indicates whether the MBMS service is released first or user first when the overload occurs. Number of the command listening port of the server. You should not use any port number occupied by other applications. Number of the data port of the server in active mode. You should not use any port number occupied by other applications.
ADD UCELLOLC(Optional)
SET FTPSSRV(Mandatory)
SET FTPSSRV(Mandatory)
ADD FTPSCLTDPORT(Mandatory) ADD UCELLMBMSFACH(Mandatory) ADD UCELLMBMSSCCPCH(Mandatory) SET UMBMSFACH(Mandatory) SET UMBMSSCCPCH(Mandatory) SET UMTCH(Mandatory)
IP address of the FTP server to be visited by the FTP client This parameter specifies the rate of the MBMS service carried on the common channel. For details of this parameter, whetherthe 3GPP TS This parameter specifies refer to the service 25.346. differential DRDspecifies whether applied. This parameter algorithm will be the service - ON: The service differential DRD algorithm differential DRD algorithm will be applied. will beThe service differential DRD algorithm - ON: applied. - OFF: applied.(If cell-level DRD parameters will be The service differential DRD algorithm will not be applied. status of cell level Service are configured, the differential DRD switch should also be considered.) - OFF: The service differential DRD algorithm will not be applied.
ADD UCELLDRD(Optional)
SET UDRD(Optional)
SET UMBMSPERF(Mandatory)
ADD UNRNC(Mandatory)
EXP LOG(Optional) ADD UCELLMBMSFACH(Mandatory) ADD UCELLMBMSSCCPCH(Mandatory) SET UMBMSFACH(Mandatory) SET UMBMSSCCPCH(Mandatory) SET UMTCH(Mandatory)
Name of the command function This parameter specifies the traffic class of the MBMS service carried on the common channel. For details of this parameter, refer to the 3GPP TS 25.346.
SET LICENSE(Optional)
Product application mode. This parameter is valid when the shared when Numbers of incoming calls to be node type is set to IUPS. If thethe forwarding threshold. is set to No, it the load exceeds parameter service handover This parameter specifies the needs indicates the GGSN. Thebetween thenot to be dpx When the the sharing attribute. IfCPU usage is configured. and overload threshold, and out threshold specifies the sharing type of a HO_INTER_RAT_RNC_SERVICE_HO_SWIT This parameter number The ON, the calls in each second CH is set incoming service handover setting NodeB. ofto value "DEDICATED" indicates reaches the of the NodeB belong to onethe of this cells threshold, new Otherwise, that allparameter is applied.arrival call attempts will be shared out to otherby indicates service handover setting assigned UMTS operator. The value "RANSHARING" the CN is CPUS. of the NodeB can belong to different applied. that cells - HO_TO_GSM_SHOULD_BE_PERFORM: operators, but a cell only belongs to one Handover to the 2G network is performed operator. The value "MOCN"indicates thatso long as 2G signals are can belong to every cell of the NodeBavailable. startmultiInter-system HCS cell reselection This parameter specifies the threshold number operators. When Srxlev of the serving cell is threshold. handover failures. This parameter of the soft HO_TO_GSM_SHOULD_NOT_BE_PERFOR less than this to reporting times ofstarts the determines the the 2G network performed M: Handover parameter, the UEisthe events inter-system measurement but that signalscells from 3G signals are to join the active set in whenthe cell that failsweak so 2G better are can handover, to For details,rate reduction of soft be selected. trigger the refer to 3GPP TS strong. 25.304. set and the attempt to join the active the active set. The smaller the value of this parameter, HO_TO_GSM_SHALL_NOT_BE_PERFORM: the easier it the 2G network is not performed Handover tois for the cell that fails to join the active 3G signals are weak but handover to even ifset in the load based soft 2G signals are join the active set through the soft handover strong. rate reduction strategy, but the easier it is to trigger the rate reduction of the active set and thus to affect the use of services. Note that this parameter need be considered in Shield flag ofwith the rate reduction evaluation combination the alarm period, and the reporting intervals of event 1A and 1C. Otherwise, the reports cannot reach the required times to trigger rate reduction during the rate reduction evaluation period.
ADD ADJNODE(Mandatory)
SET UCTRLPLNSHAREPARA(Optional)
ADD UNODEB(Mandatory)
ADD UCELLHCS(Optional)
ADD UTYPRABBASIC(Mandatory)
SET ALMSHLD(Mandatory)
SET UINTRAFREQHO(Optional)
SET UINTRAFREQHO(Optional)
SET USMLC(Mandatory)
quality. evaluation quality of added the is set, the If the signaltimer is started. If cellscelltoo poor, the general quality of the active set cannot fulfill the condition of rate reduction cannot the obviously improved, but moreand before be timer expires, the evaluation downlink resources are occupied not be rate reduction retry on the cell willand more TPC errors are larger the value of the performed. The caused, and the soft handover performance is worsened. possibility there parameter, the greater the Therefore, that the shouldcell joins the active set. But onlythe radio target be a baseline for the quality of three links to be added. parallel soft handover rate reduction evaluation As for the are allowed on the RNC. The larger processesimpact on network performance: Adjust this parameter according to the Ec/No the value of this parameter, the less the failure that that the RNC can handle. cellsthe cell soft handover area reaches as expected at network planning. The larger this parameter is, the more difficult ithandover Indicates whether to trigger soft is for the neighboring cells to join in the active set, and cross the Iur interface between the RNC but the service quality of the joining cell can be the neighboring RNC: Minimum The smaller this parameter is, the handover. ensured. quality threshold of soft whether to 1) CS_SHO_SWITCH. Indicating easier it is for the neighboringcross the Iur in trigger hard handover for CS cells to join the active set, but the service quality of the cell interface. cannot be restricted if the value of this 2) HSPA_SHO_SWITCH. Indicating whether parameter is excessivelyfor HSPA cross the to trigger hard handover low. Iur interface. Flag of whether to include this neighboring 3) NON_HSPA_SHO_SWITCH. Indicating 11 relationship in the System Information Block whether to trigger hard handover for PS(R99) (SIB11). cross the Iur interface. whether the This parameter indicates neighboring cell to include this delivered in Flag of whether information is neighboring SIB11. FALSE: specifies the channel type and This parameter not to include the neighboring relationship in the System Information Block 12 informationRRC connection establishment. the bit rate for in the SIB11. TRUE: to include (SIB12). neighboring information in the is set up on the - FACH: The RRC connection SIB11. This parameter indicates whether the common channel. neighboring cell information is delivered in - DCH_3.4K_SIGNALLING: The RRC SIB12. FALSE: not to include the neighboring connection in the SIB12. TRUE: to include the information is set up on the 3.4 kbit/s dedicated channel. neighboring information insystem information Determine whether some the SIB12. - DCH_6.8K_SIGNALLING: The RRC blocks are broadcaston the 6.8 kbit/s dedicated connection is set up in this cell. If the corresponding system information block is channel. selected, then send this system information - DCH_13.6K_SIGNALLING: The RRC block in thisis set up on the 13.6 kbit/s connection cell. dedicated channel. - DCH_27.2K_SIGNALLING: The RRC connection is set up on the 27.2 kbit/s dedicated channel.
ADD UNRNC(Mandatory) ADD UINTRAFREQNCELL(Optional) ADD UINTERFREQNCELL(Optional) ADD U2GNCELL(Optional) ADD UINTRAFREQNCELL(Optional) ADD UINTERFREQNCELL(Optional) ADD U2GNCELL(Optional)
ADD UCELLSIBSWITCH(Optional)
SET URRCESTCAUSE(Optional) ADD MTP3RT(Mandatory) ADD MTP3LKS(Mandatory) ADD MTP3LNK(Mandatory) ADD M3RT(Mandatory) ADD M3LKS(Mandatory) ADD M3LNK(Mandatory)
ADD M3LNK(Mandatory)
ADD UFACH(Optional)
ADD MTP3LNK(Mandatory)
Maximum rate of the narrowband AMR speech service for silver users.
Maximum rate of the wideband AMR speech service for silver users.
SET UUSERMBR(Optional)
This parameter specifies the DL MBR of signal for DRNC HSPA User.
SET UUSERMBR(Optional)
This parameter specifies the UL MBR of signal for DRNC HSPA User.
PING IP(Mandatory)
Source IP address
TRC IPADDR(Optional)
Source IP address
ADD TRMFACTOR(Optional)
ADD TRMMAP(Optional)
IMS SRB primary path IMS signaling primary path load threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the IMS signaling service.
ADD LOADEQ(Optional)
ADD TRMMAP(Optional)
ADD LOADEQ(Optional)
IMS signaling service bearer secondary path IMS signaling primary secondary path load ratio threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the IMS signaling service.
ADD TRMFACTOR(Optional)
ADD UCELLHCS(Optional)
WCDMAdoes not start the inter-RAT factor The UE IMS signaling service uplink measurement if it detects that the quality of the serving cell is higher than this threshold. For detailed information of this parameter, refer to 3GPP TS 25.304. This parameter defines the slot format used by the SCCPCH. The configuration of this parameter is relevant to the SF, pilot bit, and TFCI of the SCCPCH. For detailed information of this parameter, refer to 3GPP TS 25.433. Sequence number of available PRACH timeslot formats. For detailed information of this parameter, refer to 3GPP TS 25.211. Sequence number of available PRACH timeslot formats. For detailed information of this parameter, refer to 3GPP TS 25.211. Sequence number of available PRACH timeslot formats. For detailed information of this parameter, refer to 3GPP TS 25.211. Sequence number of available PRACH timeslot formats. For detailed information of this parameter, refer to 3GPP TS 25.211. Number of available PRACH timeslot formats. For detailed threshold forof this parameter, CPU usage information paging flow control refer supplementary services (SS) and location over to 3GPP TS 25.211. service (LCS). When the average CPU usage of sliding windows reaches or exceeds the Signaling route load sharing. Inflow value, the threshold, SS and LCS paging thefrom paging CPU usage threshold for recovery control is number of determines triggered. 1s (represented by n) services and flowmaximum number (2) of routes for the load the control over supplementary location service. WhenB0000 indicates that up sharing. For example, the average CPU usage of sliding windows is load sharing, to one route is used for the lower than the threshold, SS and LCS paging flowto two is B0001 and B1000 indicate that up control stopped. used for the load sharing. The routes are additional routes are not used for the load sharing. The AND operation between this value of the signaling link mask " in the link set Type and " start date. "WEEK" indicates that is equal to 0. is a weekday. "DATE" indicates the start date that the start date is a month day. "DATEWEEK" indicates the start date is expressed by a combination of weekday and month day.
ADD USCCPCHBASIC(Mandatory)
ADD UPRACHSLOTFORMAT(Optional)
ADD UPRACHSLOTFORMAT(Optional)
ADD UPRACHSLOTFORMAT(Optional)
ADD UPRACHSLOTFORMAT(Optional)
ADD UPRACHSLOTFORMAT(Mandatory)
SET FCCPUTHD(Optional)
SET FCCPUTHD(Optional)
ADD N7DPC(Optional)
SET TZ(Mandatory)
SET USMLC(Optional)
ADD EMU(Optional)
SET TZ(Mandatory)
SET FCCPUTHD(Optional)
Month in which DST starts CPU usage threshold for paging flow control over the short message service (SMS). When the average CPU usage of sliding windows reaches or exceeds the threshold, SMS paging flow control is triggered. recovery from paging CPU usage threshold for flow control over the short message service (SMS). When the average CPU usage of smooth windows is lower than the threshold, SMS paging flow control is stopped. CPU usage threshold for SMS RRC load sharing. When the CPU usage reaches or exceeds the threshold, SMS RRC connection load sharing is triggered. Packet queue usage threshold for SMS RRC load sharing. When the packet queue usage reaches or exceeds this threshold, SMS RRC connection load sharing is triggered. CPU usage threshold for recovery from SMS RRC load sharing. When the CPU usage is lower than this threshold, SMS RRC connection load sharing is stopped. Packet queue usage threshold for recovery from SMS RRC load sharing. When the packet queue usage is lower than this threshold, SMS RRC connection load sharing is stopped. Number of CPU usage samples involved in the calculation of the average CPU usage in the sliding window
SET FCCPUTHD(Optional)
SET SHARETHD(Optional)
SET SHARETHD(Optional)
SET SHARETHD(Optional) SWP BRD(Mandatory) STR BKP(Mandatory) CMP BRDAREA(Optional) ULD RSTINFO(Mandatory) CLK(Mandatory) SET SHARETHD(Optional) SET MPUBIND(Mandatory) ADD BRD(Mandatory) LOD BRD(Optional) SET FCCPUTHD(Optional) SYN BRDAREA(Optional) SET FCMSGQTHD(Optional) CMP TBLDATA(Mandatory) SET MSPCMD(Mandatory) SET MSP(Mandatory) SET BFDPROTOSW(Mandatory) STR UNODEBBWRPT(Mandatory) ADD MTP3LNK(Mandatory) ADD SAALLNK(Mandatory) ADD SCTPLNK(Mandatory)
STR IMATST(Mandatory) SET E1T1LOP(Mandatory) LOP ADJNODE(Mandatory) ADD E1T1(Mandatory) STR E1T1TST(Mandatory) SET OPTLOP(Mandatory) PING IP(Mandatory) TRC IPADDR(Mandatory) ADD M3LNK(Mandatory) SET QUEUEMAP(Mandatory) SET E1T1(Mandatory) ADD FRALNK(Mandatory) ADD TSCROSS(Mandatory) SET PHBMAP(Mandatory) ADD IMAGRP(Mandatory) ADD UNILNK(Mandatory) ADD IMALNK(Mandatory) ADD DEVIP(Mandatory) ADD IPRT(Mandatory) ADD URNCCBCPUID(Mandatory) SET OPT(Mandatory) SET COPTLNK(Mandatory) SET ETHPORT(Mandatory) ADD UIURGCONN(Mandatory) ADD PPPLNK(Mandatory) ADD UIURCOMMSCCP(Mandatory) ADD MPGRP(Mandatory) ADD MPLNK(Mandatory) ADD ETHIP(Mandatory) BLK IMAGRP(Mandatory) BLK IMALNK(Mandatory) SET UNCELLDETECTSWITCH(Mandatory) ADD ATMLOGICPORT(Mandatory) ADD IPLOGICPORT(Mandatory) ADD ICMPGUARD(Mandatory) EXP IPCHK(Mandatory) STR ALMLOG(Optional) STA ALMLOG(Optional) ADD VLANID(Mandatory) BLK FRAIMA(Mandatory) ADD IPPATHBIND(Mandatory) ADD IPRTBIND(Mandatory) ETHMD(Mandatory) ADD OBJALMSHLD(Optional) ADD ETHMA(Mandatory) LOP VCL(Mandatory) ADD ETHMEP(Mandatory) SWP ETHPORT(Mandatory) PING MAC(Mandatory) ADD ETHOAMLOOPTST(Mandatory) STR ETHREDPORT(Mandatory) SET VCLLOP(Optional) TRC MAC(Mandatory) ADD ETHTRK(Mandatory) ADD ETHTRKLNK(Mandatory) ADD ETHTRKIP(Mandatory) STR ETHMIRRORPORT(Mandatory)
This parameter is valid when the node type is set to UNI_AAL2SWITCH. It is the slot number of the SAAL link of the AAL2 signaling bearing the adjacent node.
Number of the slot where the alarm is generated Number of the slot where the alarm is generated, the number of the slot where the OMU board is positioned is not supported
ADD UIMSISNAMAP(Mandatory)
SET UINTERRATHONCOV(Optional)
SET SNTPCLTPARA(Mandatory)
ADD OPC(Optional)
ADD OPC(Mandatory)
ADD OPC(Optional)
ADD UCELLHCSHO(Optional)
non-coverage based system relocation in or out process. When it is set to OFF, the RNC Data format of UMTS cell load information to does not send the specified signaling point. When this parameter is set to "WNF", theor out the GSM during the system relocation in SPC is expressed in the form of an integerfor the process. This parameter is designed number. Indicating whethercooperate with the GSM When this parameter is set to "NDF", the SPC UMTS network to the SNAC need be configured. in the UE is handed over from the is expressed three segments. The number network. When TRUE: The SNAC need be configured. of bits included to the GSM network, the RNC UMTS network in each segment depends on FALSE: The SNAC need point code best the setting of the signaling not be the bits cell normalizes the load information of configured.UE can GSM network. Then, the parameter. it to the access any cell of the and sends PLMN.the signaling point code bits to accept or Whennetwork determines whether parameter GSM is set to "BIT14", the number of bits included in reject the handover request.This switch is only each segment is 3, 8, and 3. effective in CS domain,the RNC does not send When the signaling point codethe GSM in PS UMTS cell load information to bits parameter is set to "BIT16", the number of bits included in domain. each segment is 4, 8, and 4. When the signaling point code bits parameter is set to "BIT24", the number of bits included in Synchronization period of the SNTP client each segment is 8, 8, and 8. service that the signaling point code bits Assume As an integer, the OSP code can be parameter is setdecimal digit or a hexadecimal expressed by a to "BIT14" and the SPC is expressed in three segments 5-7-2.by a can digit. If the OSP code is expressed You perform the following steps to before this hexadecimal digit, H' is added convert the SPC to an integer: number. whether the UE speed estimation is Indicating the value in each segment to a 1. Convert allowed in this cell. fill 0s into a segment if the binary number and Value ON indicates that in that segment does number of bits included the UE speed estimation bits contained in cell. binary number Number of is allowed in this The signaling point not meet the requirements. the Value OFF indicates segmentUE101, which is code of value 5 in the first that the is speed estimation is Thus, you need not to fill 0s into of three bits. not allowed in this cell. Thefirst segment. The binary numbertriggered the UE speed estimation cannot be of value even if this switch is enabled in either of the 7 in the second segment is form of previously OSP code expressed in the111. As segments following cases: signaling point code bits stated, when the 8-8-8cell is not configured as a HCS cell by -The parameter is set to "BIT14", eight bits must be "ADD UCELLHCS" or "MOD UCELLHCS". included in the second segment. Thus, the -The algorithm switch for the RNC-oriented UE second segment is put as 00000111. speed estimation can calcuate the binary Accordingly, you is not enabled by "SET UCORRMALGOSWITCH". third segment. The number of the GE electrical port. When this Rate over the value in the binary number ofto 1000M, the GE electrical parameter is set 5-7-2 is 101 00000111 010. 2. Convert this binary number torate of 1000 port performs negotiation at the a decimal number. The decimal form of this binary is not Mbit/s. If, however, the negotiation result number is 10,298. 1000 Mbit/s, the negotiation fails. When this parameter is set to UE, multiples this For a high-mobility AUTO, the GE electrical port performs its reselection delay tothe parameter by auto negotiation, and reduce negotiation result canof the UE. 100 Mbit/s or the reselection delay be either This 1000 Mbit/s. be set to 10 for middle-speed parameter can UE, which means no influence upon reselection delay time. This parameter is not configured when its value is 255. For detailed information, refer toa groupTS 25.304. have Meaning: Identifies 3GPP of cells that specific capabilities for different service types. You can take any value that is not in use. The used values can be queried through the "LST USPG" command. Indicating which service priority group this cell belongs to. The service priorities of services in this cell can be obtained through this parameter. For detailed information of this parameter, refer to 3GPP TS 25.304.
SET ETHPORT(Optional)
ADD UCELLSELRESEL(Optional)
ADD USPG(Mandatory)
SET USCHEDULEPRIOMAP(Mandatory)
This parameter indicates the scheduling priority of HS-DSCH or E-DCH data for interactive or background services. The value 11 indicates the highest priority, the value 2 indicates the lowest, and the other values (including 0, 1, 12, 13, 14 and 15) are reserved for the other services. This parameter indicates the scheduling priority of HS-DSCH or E-DCH data. The value 15 indicates the highest priority, and the value 0 indicates the lowest.
SET USPIFACTOR(Mandatory)
STR IPLOPTST(Mandatory)
SET FTPSCLT(Optional)
ADD UCELLPUC(Optional)
ADD UCELLPUC(Optional)
SET UFRCCHLTYPEPARA(Optional)
It is used to decide whether the cell load level is "Heavy" or not. It Source port numberis denoted by the ratio of NodeB TX power to the maximum TX power. If the load of a cell is equal to or higher than this threshold, the load level of this cell is Whether the FTP client supports the state heavy. firewall If the load level of a cell is heavy, the PUC algorithm will configure selection/reselection parametersused to determine the cell load Hysteresis for this cell to lead the UE camping on this cell to reselect the ratio inter-frequency level. It is to decideby another of NodeB TX It is used denoted whether the cell load level neighboring cell with light load. power to thenot. It is denoted by the ratio of to is "Light" or maximum TX power. It is used avoid the unnecessary ping-pong effect of a NodeB TX power to the maximum TX power. cell between a cell is equal to or lower than this If the load of two load levels due to tiny load change. For detailed information of is light. threshold, the load level of this cell this parameter,level of a3GPP TS 25.304. If the load refer to cell is light, the PUC algorithm will configure selection/reselection parameters for this cell to lead the UE to reselect this cell rather than the previous interThis parameter specifies the channel type of frequency neighboring cell with heavy load. SRB. - DCH: Both uplink and downlink are preferably carried on DCH. - HSDPA: Uplink is preferably carried on DCH, Uniquely identifies an OSPcarried on HSand downlink is specifies whether [SRB This parameter preferably DSCH. type] is valid in the RRC connection channel - HSPA: Uplink is preferably carried on E-DCH, setup procedure. and downlink is preferably carried on HS- TRUE: [SRB channel type] is valid in the DSCH. RRC connection setup procedure and other procedures. - FALSE: [SRB channel type] is invalid in the RRC connection setup procedure but valid in other procedures.
SET UFRCCHLTYPEPARA(Optional)
ADD TRMFACTOR(Optional)
ADD UCELLEFACH(Optional)
The MAC-c on Iub interface will increase after WCDMA signaling service downlink factor the the Enhanced CELL_FACH is supported in cell. When the UE enters the Enhanced CELL_FACH state, this parameter determines the guaranteed speed of the MAC-c flow that sends SRB data on the Iub interface.
ADD UCELLEFACH(Optional)
The MAC-c on Iub interface will increase after the Enhanced CELL_FACH is supported in the cell. When the UE enters the Enhanced CELL_FACH state, this parameter determines the maximum speed of the MAC-c flow that sends SRB data on the Iub interface.
ADD TRMMAP(Optional)
Signaling service bearer primary path Signaling primary path load threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the signaling service.
ADD LOADEQ(Optional)
ADD TRMMAP(Optional)
Signaling service bearer secondary path Signaling primary secondary path load ratio threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the common channel. The batch file to be executed: The content of the batch file consists of service commands to be executed in batches. The source file is WCDMA signaling service uplink factor located in the FTP subdirectory of the OMU installation directory, and you should not add the path when entering the name. The characters (@, #, !, %, ^, &, *, /, ., [, ], \, :, ?, ', ", <, >, and |) cannot appear in the file name.
ADD LOADEQ(Optional)
ADD TRMFACTOR(Optional)
RUN BATCHFILE(Mandatory)
ADD CLKSRC(Mandatory)
Priority of the clock source.There are four priorities (in descending order): 1, 2, 3, 4.
SET CLKMODE(Mandatory)
ADD TSCROSS(Mandatory)
ADD CLKSRC(Mandatory)
BLK IMAGRP(Mandatory) BLK IMALNK(Mandatory) ADD ATMLOGICPORT(Mandatory) ADD IPLOGICPORT(Mandatory) ADD ICMPGUARD(Mandatory) STR IPCHK(Mandatory) ADD VLANID(Mandatory) BLK FRAIMA(Mandatory) STR IPLOPTST(Mandatory) ADD IPPATHBIND(Mandatory) IPRTBIND(Mandatory) ADD TSCROSS(Mandatory) ADD ETHMA(Mandatory) ADD ETHMEP(Mandatory) PING MAC(Mandatory) STR ETHOAMLOOPTST(Mandatory) ADD MAC(Mandatory) TRC SAALLNK(Optional) SET BFDPROTOSW(Mandatory) SET VCLLOP(Mandatory) SET TRANSPATCHPARA(Mandatory) STR UNODEBBWRPT(Mandatory)
Source timeslot mask Specifies the frequency through which ER can be sent. If the second ER message is received before the timeout of the timer, the link is released.
ADD MTP3LNK(Mandatory) ADD SCTPLNK(Mandatory) ADD SAALLNK(Mandatory) ADD ADJNODE(Mandatory) ADD RSCGRP(Mandatory) SET PHBMAP(Mandatory)
ADD M3LNK(Mandatory)
subrack No.
SET UNCELLDETECTSWITCH(Mandatory)
COL LOG(Optional) EXP ALMLOG(Optional) STA ALMLOG(Optional) ADD OBJALMSHLD(Mandatory) ADD ETHMD(Mandatory) ADD ETHTRK(Mandatory) ADD ETHTRKLNK(Mandatory) ADD ETHTRKIP(Mandatory) STR ETHMIRRORPORT(Mandatory)
ADD SUBRACK(Mandatory)
SET UQOSACT(Optional)
SET USRNSR(Optional)
SET USRNSR(Optional)
SET USRNSR(Optional)
SET USRNSR(Optional)
SET USRNSR(Optional)
SET UCORRMALGOSWITCH(Optional)
SRNSR algorithm switch. 1) SRNSR_DSCR_IUR_RESRCE_SWITCH: Meaning: Number of the EPS subrack When the switch is on, relocation for managing the subsystem to which the NodeB transmission optimization over the Iur interface belongs is allowed. When there is congestion over the Iur interface, the UE may be selected to initiate relocation parameter is set to has only a radio [Measurement the UE delay by FP When the or DSCR if transfer YES, QoS link over the Iur interface andbased on and the Node synchronization between SRNC the control for DL BE services is the link have Name attributes as the congested link. Based sameand RLC retransmission. When the DRNC of the subrack to be added TCP ]+[Estimated non-measurement delay on DSCRInd set"ADD UNRNC", the RNC BE offset] > [transfer delay QoS control for DL parameter is of to NO, provided by the Qos of SRNS relocation-allowed traffic type.be DSCR. decides whether tothe relocation will or the current based on the TCP. In bothThis traffic], initiate relocation services is determines the bearing policy over parameterThe value of RELparameter with the When the RRC CONN this message should triggered. situations, QoS controlparameter is set to RT, is not performed across theset value "Directed Signalling Connection cause according If the time delay concerned be Iur interface. the Iur interface. to the can trigger the static only the real-time service to the UE,services re-establishment" is sent requirements of the most common the UE relocation; ifinterface. If the is set to NRT, only initiates RRCthe parameter value is too small, over the Iur reestablishment and updates the the non-real-time service can triggerthe value routing area once immediately. unnecessary relocation will occur; if the static relocation; if the QoS of the is set to ALL, all 2) too large, the parameter services over the is SRNSR_DSCR_LOC_SEPRAT_SWITCH: services canwill be on, the RNC initiates static When the switch is affected. relocation. Iur interface trigger the static relocation or DSCR if the optimal cell and the The transfer delay provided by the Qos of the intra-frequency neighboring cell ofrelocations Time interval is the parameter set the optimal current traffic between two SRNS at the CN cell are not on to the RNC(the SRNC and the based on Iur resource optimization. For each and is notified the SRNC through an RAB CRNC are separated). Based on DSCRInd of time interval, the RNC specifies several UEs to ASSIGNMENT REQUEST message. "ADD UNRNC", the RNC decides whether to perform the relocation based on Iur resource SRNS relocation expiry time.should be set initiate relocation parameter optimization. The or DSCR. In order to avoid ping-pong to the the time interval successfully 3) SRNSR_DSCR_PROPG_DELAY_SWITCH: according relocation, the user, if of the Iur relocated, switchallowed to RNC initiates static When the is not is report. The difference in source congestion on, the relocate again the specified previous theparameter. a link relocation or time of twodelay over between the DSCR ifthethe duration of a timer, This parameter defines values cannot be cannot meet QoS requirements (the SRNC too large. Individually separationaof the SRNC parameter which starts after the changing Thus, delay and the CRNC are separated). the congestion will cause the time difference in is expired, and the CRNC.reduced ontimer When the the over the link is relocation triggering, andside reportrelocation is triggered. network thus static and the enhanced. Based on DSCRInd andalgorithm is the the QoS cannot be efficiently performed. This parameter determines the number of UEs of "ADD UNRNC", the RNC decides whether to over the Iur interface. If the parameter is set initiate relocation or DSCR. too large, too much Iur resources will be 4) SRNSR_DSCR_SEPRAT_DUR_SWITCH: occupied; switch is on, the is set initiates static the parameter RNC too small, When the iftrigger time after IURCCH. The Relocationrelocation ping-pong or DSCR ifmay duration of relocation occurs afterthe occur. relocation timeout. This parameter separation between the SRNC and the CRNC determines the probability of the relocation of exceeds a configured threshold.on time on the Iur common channel based Based DSCRInd ofThe larger the value of thisdecides separation. "ADD UNRNC", the RNC whether to initiate relocation or DSCR. parameter, the more UEs are carried over this Iur channel, and the more Iur resource is occupied; if the value of this parameter is set too small, no UE will be carried on the Iur channel, thus causing the waste of resources.
SET USRNSR(Optional)
SET CLK(Mandatory)
EXP ALMLOG(Optional)
ADD USSCH(Optional)
Offset of the SSCH transmit power from the PCPICH transmit power in a cell.
SET CPUTHD(Optional)
SET CPUTHD(Optional)
ADD UTYPRABBASIC(Mandatory)
SET CPUTHD(Optional)
SET CPUTHD(Optional)
ADD UCELLHCS(Optional)
ADD BKP(Optional) STR UCELLSELRESEL(Optional) ULD RSTINFO(Mandatory) LOD BRD(Optional) ADD URNCCBCPUID(Mandatory) CMP TBLDATA(Mandatory)
CPU usage alarm clearance threshold CPU CPU usage alarm threshold. When the usage exceeds the threshold, a CPU usage alarm is reported. "CPU cell reselection. When Threshold for inter-RAT occupancy alarm clearance threshold" is smaller than "CPU of the quality (CPICH Ec/No measured by UE) occupancy alarm threshold". this threshold the serving cell is lower than plus the [Qqualmin] of the cell, the inter-RAT cell reselection procedure will be started. This This parameter specifies the type of source. parameter speech service - SPEECH:is not configured when its value is 127. This parameter is not service - UNKNOWN: non-speech configured when its value is 127. The intra-frequency cell reselection has a priority higher than the interDSP usage alarm clearance threshold. When frequency cell reselection and inter-RAT cell the DSP usage is lower than the threshold, the reselection, the intra-frequency cell reselection DSP threshold should be higher than the interstart usage alarm threshold. DSP usage alarm is cleared. When the DSP frequency cell reselection startathreshold and usage exceeds the threshold, DSP usage inter-RAT cell reselection start threshold. If the alarm is reported. "DSP occupancy alarm cell reselection threshold is set than to clearance threshold" isreselection a "DSP Intra-system HCS cell smaller may start comparatively high value, occupancyWhen Srxlev of the UE alarm threshold". serving cell is threshold. start cell reselections, and the the frequently less than this parameter, the UE starts the If battery of the UE may be largely consumed. intra-frequency andthreshold is set to a the cell reselection inter-frequency measurementslow value, it is difficult for cell comparatively so that better cells can be selected. Forto be started, and the UE may not reselections details, refer to 3GPP TS 25.304. timely reside in the cells with good quality, affecting the quality of communication between the UTRAN and the UE. For detailed information, refer to 3GPP TS 25.304.
ADD UIURGCONN(Mandatory)
ADD UNODEB(Optional)
EXP ALMLOG(Optional)
SET TZ(Mandatory)
Start of DST The operation time of the log record should be after this time. If this parameter is not specified, the start time is not limited. If the time mode is set to "DAILY_T", "WEEKLY_T", or "MONTHLY_T", you should set this parameter. The operation time of the log record should be after this time. If this parameter is not specified, the start time is not limited.
EXP LOG(Optional)
ADD SUBTSK(Mandatory)
COL LOG(Optional)
EXP ALMLOG(Optional)
Start time of the alarm record. By default, the start time is 00:00:00. Service type in the ATM. CBR and RTVBR Start time of the alarm record.and default, the carry real-time services. CBR By RTVBR are start time is 00:00:00. user planes of the Iur/Iub usually carried on the and Iu-CS interfaces. NRTVBR and UBR carry non-real-time is set up, NRTVBR and counting When a DCH services. the UE starts UBR are usually carriedfaulty CRCs plane and control the number of on the user within a specified plane of the Iu-PSthe number of faulty CRCs sliding window. If interface. exceeds the specified threshold, event 5A is triggered. The length of the sliding window is specified by Statistic Block Number For 5A Event.
STA ALMLOG(Optional)
ADD ATMTRF(Mandatory)
ADD UTYPRABQUALITYMEAS(Mandatory)
ADD UCELLGPSFRMTIMING(Optional)
Start number of the alarm record When the parameter is set to INACTIVE, the GPS frame timing measurement is not activated. When the parameter is set to ACTIVE, the GPS frame timing measurement is activated.
ADD UCELLDYNSHUTDOWN(Mandatory)
Start time of the first interval when the "Cell dynamic shutdown" feature is valid.
ADD UCELLDYNSHUTDOWN(Mandatory)
Start time of the second interval when the "Cell dynamic shutdown" feature is valid.
ADD UCELLDYNSHUTDOWN(Mandatory)
Start time of the third interval when the "Cell dynamic shutdown" feature is valid.
SET UIUTIMERANDNUM(Optional)
CN protection timer.
ADD UNRNC(Optional)
Protection timer used in case of the DSP link intermittence at the neighboring RNC.
ADD SAALLNK(Optional)
ADD OP(Mandatory)
ADD N7DPC(Optional)
Whether to enable the signaling point with the signaling transfer function The MAC-c on Iub interface will increase after This parameter specifies theis supported in the the Enhanced CELL_FACH DL MBR of streaming for DRNC HSPA User. cell. When the UE enters the Enhanced CELL_FACH state, this parameter determines This parameter specifies the rate threshold of the guaranteed E-DCHof the MAC-c flow that 2ms TTI on the speed for HSUPA streaming sends streaming service data on and Iub service. When the cell capability the UE interface. allows 2ms TTI, 2ms TTI on the Ecapability DCH is used if the PS streaming service carried on HSUPA interface will increase after The MAC-c on Iub with uplink rate isn't less than this threshold. Otherwise,supported in the the Enhanced CELL_FACH is 10ms TTI is used. cell. When the UE enters the Enhanced CELL_FACH state, this parameter determines the maximum speed of the MAC-c flow that sends streaming service data on the Iub interface.
SET UUSERMBR(Optional)
ADD UCELLEFACH(Optional)
SET UFRC(Optional)
ADD UCELLEFACH(Optional)
SET UUSERMBR(Optional)
This parameter specifies the UL MBR of streaming for DRNC HSPA User.
ADD OP(Mandatory)
ADD UAICH(Optional) ADD UCELLMBMSSCCPCH(Optional) ADD UPICH(Optional) ADD USCCPCHBASIC(Optional) SET UMBMSSCCPCH(Optional)
This parameter indicates whether the SCCPCH uses STTD or not. For detailed information of this parameter, refer to 3GPP 25.346. This parameter indicates whether the cell This parameter specifiestransmit diversity supports the space time the logical serial number (STTD). of a subflow for the typical RAB. A bearer may use several subflows for transmission. For example, AMR speech service may use three traffic subflows, which This parameter indicates whether STTD TX correspond to three transport channels. diversity is supported. Subflows 0, 1, and 2 carry bit flows of classes A, B, and C respectively. For other types of RABs, there is only one subflow. Therefore, the traffic subflow index is set to 0, which corresponds to one transportThis parameter Maximum sub-frame length. channel. indicates the maximum sub-frame length for multiplexing. If the length of a sub-frame exceeds this value, the sub-frame is not multiplexed.
ADD UEXT3GCELL(Optional)
ADD UCELLSETUP(Mandatory)
ADD IPMUX(Optional)
SET SUBNET(Mandatory)
ADD UCELLQUICKSETUP(Optional)
Indicating whether the cell supports the CBS service. This parameter specifies whether the NodeB allows setting of the downlink DPCH spreading factor to 512. If this parameter is set to TRUE, the NodeB allows setting of the downlink DPCH spreading factor to 512. This parameter indicates whether to support the mode change of downlink power control This parameter specifies whether the NodeB (DPC). setting of DPC MODE to TRIPLET. supports - If this parameter is set to TRUE, the NodeB supports setting of DPC MODE to TRIPLET. - If this parameter is set to FALSE, DPC MODE is always SINGLE. Indicates whether to support establishing IURCCH between the RNC and the neighboring RNC.
ADD UNODEBLMTPARA(Optional)
ADD UEXT3GCELL(Optional)
ADD UNODEBLMTPARA(Optional)
ADD UNRNC(Optional)
SET CLK(Optional)
ADD UCNNODE(Optional)
CR supported by the protocol version of the CN. Identifying whether the inter-RAT cell supports PS HO. TRUE indicates that the inter-RAT cell is able to perform the handover procedure with relocation. FALSE indicates that the cell is unable to do so. This parameter specifies whether the NodeB supports PS real-time services being carried on HSDPA. Identifying whether the inter-RAT cell supports RIM. (RIM is used to obtain the SI/PSI information of the inter-RAT cell.) For the details of RIM process, refer to the 3GPP TS 25.901 protocol.
ADD UEXT2GCELL(Optional)
ADD UNODEBLMTPARA(Optional)
ADD UEXT2GCELL(Optional)
SET ALMPORT(Optional)
Operating state of the environment alarm port If this parameter is set to "ON", you must set "OMU automatic switchover interval". Otherwise, "OMU automatic switchover interval" is not displayed.
SET ASWPARA(Mandatory)
SET TZ(Mandatory)
SET SCUPORT(Mandatory)
SET SLFSLVSW(Mandatory)
SET LICENSECTRL(Mandatory)
Grace Protection Period Switch determines whether to enter the grace protection period.
SET BFDPROTOSW(Mandatory)
ADD UCNNODE(Optional)
This parameter is valid only when CNDomainId is set to "CS_DOMAIN". When the parameter is set to ON, the RNC supports the contents of CR 0125 in 3GPP 25.415. When the parameter is set to OFF, the RNC does not support the contents of CR 0125 in 3GPP 25.415.
ADD SCTPLNK(Optional)
The field indicates whether the primary path can be switched back when it is available. The association is smoothly switched over to the primary path after the number of heartbeat responses is received.
ADD SCTPLNK(Optional)
SET SS7PATCHSWITCH(Optional)
SET SS7PATCHSWITCH(Optional)
SET SS7PATCHSWITCH(Optional)
SET SS7PATCHSWITCH(Optional)
SET SS7PATCHSWITCH(Optional)
SET SS7PATCHSWITCH(Optional)
SET SS7PATCHSWITCH(Optional)
SET SS7PATCHSWITCH(Optional)
SET SS7PATCHSWITCH(Optional)
SET SS7PATCHSWITCH(Optional)
SET OPSW(Mandatory)
SET TZ(Mandatory)
CMP BRDAREA(Optional)
Automatic synchronization flag When call shock control starts, the AMR_RRC number can be accessed per second for system.
SET UCALLSHOCKCTRL(Optional)
SET SYS(Optional)
SET SYS(Optional)
Description of the Base Station Controller When call shock control starts, the register and 3G->2G reselect number can be accessed per second for system.
SET UCALLSHOCKCTRL(Optional)
SET USTATETIMER(Optional)
SET SYS(Optional)
SET SYS(Optional)
SET UCALLSHOCKCTRL(Optional)
When call shock control starts, it is the max number of RRC_REJ message.
SET SYS(Optional)
Services provided by the Base Station Controller RRC REQ total number of one When the system reach this threshold in period and can't been shared out to other CPUS system, the RRC flow control will be triggered. New RRC REQ will be rejected or discarded. When the reception of a TFP causes unavailability of a route, this timer is started to regularly check whether the route is recovered. This timer is a protection timer waiting for an uninhibit acknowledgement message (LUA) from the peer end after an uninhibit message (LUN) is sent to the peer end. This timer is a protection timer waiting for a force uninhibit acknowledgement message (LUA) from the peer end after a force uninhibit message (LFU) is sent to the peer end. This timer is a protection timer waiting for an inhibition acknowledgement message (LIA) from the peer end after an inhibition message (LIN) is sent to the peer end. This timer is started when a link fails to be started. The restart of the link is initiated after this timer expires. When a normal changeover cannot be initiated, services will be changed over to an alternative link after this timer expires to avoid disorder of data. After a local link is inhibited, this timer is started to regularly check the management states at both ends of the link. After a remote link is inhibited, this timer is started to regularly check the management states at both ends of thetimer waiting for an This timer is a protection link. extended changeover acknowledgement message (XCA)when UE sends theafter an T300 is started from the peer end RRC extended changeover ordermessage. It is CONNECTION REQUEST message (XCO) is sent to the peer end. stopped when UE receives the RRC CONNECTION SETUP message. RRC CONNECTION REQUEST will be resent upon the expiry of the timer if V300 is lower than or equal to N300, else enter idle mode.
SET UCALLSHOCKCTRL(Optional)
SET MTP3TMR(Optional)
SET MTP3TMR(Optional)
SET MTP3TMR(Optional)
SET MTP3TMR(Optional)
SET MTP3TMR(Optional)
SET MTP3TMR(Optional)
SET MTP3TMR(Optional)
SET MTP3TMR(Optional)
SET MTP3TMR(Optional)
SET UIDLEMODETIMER(Optional)
SET UCONNMODETIMER(Optional)
SET UCONNMODETIMER(Optional)
SET UCONNMODETIMER(Optional)
T302 is started after the UE transmits the CELL UPDATE/URA UPDATE message and stopped after the UE receives the CELL UPDATE CONFIRM/URA UPDATE CONFIRM message. CELL UPDATE/URA UPDATE will T304 is started after the UE sends the UE be resent upon the expiry of the timer if V302 CAPABILITY INFORMATION message and less thanafter the UE N302; otherwise, the UE stopped or equal to receives the UE will enter idle mode. Protocol default value is CAPABILITY INFORMATION CONFIRM T305 receives CELL 4000. is started after the UE INFORMATION message.CONFIRM/URA UPDATE CONFIRM UPDATE UE CAPABILITY will be resent upon the expiry of the timer if in CELL_FACH, URA_PCH or CELL_PCH V304 less stoppedequal the UEotherwise the state. It is than or after N304; enters another cell update procedure will be transmitted upon state. CELL UPDATE will be initiated. Protocol default value this timer if T307 is not activated the expiry of is 2000. and the UE detects "in service area"; otherwise, T307 will be started. Protocol default value is 30. "Infinity" means the cell will not be updated.after T305 has expired and the T307 is started UE detects "out of service area". It is stopped after the UE detects "in service area". The UE will enter idle mode upon expiry.Protocol T308 is started after the UE transmits RRC default value is 30. CONNECTION RELEASE COMPLETE. This message will be sentthe UEthe reselected to a T309 is started after upon is expiry of the Timer if V308 less than or equal to N308, cell belonging to another otherwise, thesystem in connected mode, or radio access UE will enter idle mode. Protocol default value is 160.FROM UTRAN the CELL CHANGE ORDER message is received. It is stopped after the UE is successfully connected in the new cell. The UE will continue the connection to UTRAN T314 is started when the criteria for radio link upon expiry. Protocol UE starts tobearers a failure are fulfilled and only radio establish T312 is started when default value is 5. (RBs) associated with T314 detects DCH, and stopped when UEexist.T314 is stoppedstarted when sync" indications from consecutive N312Cell the criteria for radiohas T315 is after the "in Update procedure link been indicates physicalonly the radio bearer is 12. L1. It completed. Protocol default valuefailure failure are fulfilled, and UE detects T313 is of the RL failure channel setupis in In case started after the when the is stopped UE upon the expiry T315 exists.T315 the associated with of "outtimer. consecutive state, If theof sync" indications CELL_DCH N313 RL cannot be after L1. T313 is stopped after the UE detects the Cell Update procedure has been from successfully reconfigured byvalue isUPDATE completed. N315 "in sync" CELL 180. consecutiveProtocol default indications from CONFIRMthe RL failure when the UE is in expiry of In case of before theLink (RL) the L1.It indicates Radio (or T315), failure UPDATE corresponding T314 CELL upon CELL_DCH state, T315 (or T314) started expiry. resent fordefault value is 3. is (this Protocol RL reconfiguration will be and CELL UPDATE is sent. If the RL cannot operation relates to T302 andby CELLT314 be successfully reconfigured N302). should beCONFIRM before T302*N302. In UPDATE set greater than the expiry of the case of the expiry of (or T314), corresponding T314, corresponding T315 the UEthe CELL UPDATE T316 is RBs willafter started detects "out of serviceresent forbe removed. will be area" in URA_PCH or CELL_PCH RL reconfiguration (this service operation relates to T302 and N302). T315 "in state.T316 is stopped after the UE detects should be set greater than T302*N302. In case service area".The cell update procedure will be of the expiry of T315, the corresponding initiated upon the expiry of the timer if "in service RBs will detected; otherwise, T317 will be removed. service area"periodical location update timer. Value of the is be started. The UE will enter CELL_FACH The state and initiate cell update is implemented by periodical update procedure procedure when the UE detects "in service area". Protocol the MS through the default value is 30. location update procedure. The value 0 indicates that the periodical update procedure is not used. This parameter is valid only when [CN domain ID] is set as CS_DOMAIN.
SET UCONNMODETIMER(Optional)
SET UCONNMODETIMER(Optional)
SET UCONNMODETIMER(Optional)
SET UCONNMODETIMER(Optional)
SET UCONNMODETIMER(Optional)
SET UCONNMODETIMER(Optional)
SET UCONNMODETIMER(Optional)
ADD UCNDOMAIN(Optional)
SET UCONNMODETIMER(Optional)
UPDATE CONFIRM"). If T381 expire and RNC does not receive "RRC CONNECTION SETUP COMPLETE"(or the response of "ELL UPDATE CONFIRM") and V381 is smaller than N381, RNC resend "RRC CONNECTION SETUP"(or "CELL UPDATE CONFIRM") and restart timer T381 and increase V381. If RNC receive "RRC CONNECTION SETUP COMPLETE"(or the response of "CELL UPDATE CONFIRM"), T381 will be stopped. Default value is 600ms. When a normal changeback cannot be initiated, services will be changed back to a normal link only after this timer expires to avoid disorder ofis a protection timer waiting for a This timer data. changeback acknowledgement message Threshold of the target frequency first (CBA) from the peer end after the for triggering inter-frequency measurement with changeback declaration (CBD) is sent to the measurement quantity of Ec/No for CS domain peer timer is a protection timer waiting for a This end. services. changeback acknowledgementvalue of [InterFor CS domain services, if the message Threshold of the target frequency for triggering (CBA) from the peerreport mode] is set to the frequency measure end after withsecond inter-frequency measurement is sent to the changeback declaration parameter is used to EVENT_TRIGGER, this (CBD) for CS domain measurement quantity of RSCP peer end. set the measurement control of event 2B. One services. of the necessary conditionsthe triggering event ThisCS domain services, ifa for value of [InterFor timer is started when transmission Threshold message when thesent. for of TFP will triggering 2B can be of the target frequency The the prohibited measure report mode] is set to frequency met only (TFP) is quality inter-frequency measurement with threshold. If target sent any is higher than this is used this not be frequencymore during the running of to EVENT_TRIGGER, this the target PS domain This parameter specifiesparameter number of measurement quantity of Ec/No for report the the measurement control measure 2B. One timer. retransmissions. In the event set value of [Inter-frequency of link quality the RLC set to PERIODICAL_REPORTING, HSPA services. mode]necessary conditions for triggering event is of the algorithm for E-FACH, When the adjust For HSPA services, if the value of [Interthiscan be of the target to evaluatefor of the parameter is used frequency interThreshold retransmissionsthe quality triggering 2B met only when measured measure report mode] is set to the higher than frequency handovers at thearewith inter-frequency measurement this threshold. frequency is higher RNC. is used to targethandover,Ec/N0 should be decreased. If number, to preventthan EVENT_TRIGGER, this parameter PS domain After ping-pong measurement quantity of be increased. RSCP for the the measurement control measure report Otherwise,the inter-frequencyof event 2B. One set value of [Inter-frequency measurement handover, Ec/N0 should HSPA services.PERIODICAL_REPORTING, mode]necessary target frequency for triggering Threshold of to conditions for triggering event of the is set the should not services, if again. That is, this For HSPA be is used to value of interthiscan be metstarted the evaluate [Interinter-frequency only when the quality thethe 2B parameter measurement with of start parameter handoversset the RNC.is set to is usuallyreport mode] frequency measurehigherEc/NothanPS domain at higher for measurement quantity of equal this target frequency is 2D orparameter threshold. If threshold for eventpreventthan to the used to EVENT_TRIGGER, is After handover, to this ping-pong report non-HSPA services. the the measurement control measure 2B. One threshold of [Inter-frequency of event set value the inter-frequency measurement handover, event 2F. For PSis set to PERIODICAL_REPORTING, domain non-HSPA mode]necessary target frequency foriftriggering Threshold of the conditionsservices, the of the of [Inter-frequency measureis, this event should not be started again. for triggering That value thiscan be met is used to evaluate report parameter only when the quality of the inter-frequency measurement with inter2B parameter handoversset the RNC. this trigger is usually at mode] is set toquantity ofhigher thanPS domain EVENT_TRIGGER, the frequency measurement is higherRSCPto the for target frequency to set the measurement threshold for used preventthan this threshold. If parameter is event After handover, to 2D or equal ping-pong report non-HSPA services. the value event 2B. One of the necessary threshold of [Inter-frequency measure control of event 2F. handover, the inter-frequency measurement For PS domain non-HSPA services, if the mode] is set to PERIODICAL_REPORTING, conditions be started again. That is, this should not for triggering event 2B can be met value of [Inter-frequency measure interthis parameter quality of the target report evaluate only when the is used tohigher than this start is parameter handoversset the RNC. frequency mode] is set usually at frequency is to EVENT_TRIGGER, the [Interhigher thanis used to set the theto the of threshold. threshold for eventprevent If measurement parameter this to 2D or equal value After handover, frequencyof event 2F. ofping-pong measure One the necessary threshold event 2B. report mode] is set to control of the inter-frequency measurement handover, PERIODICAL_REPORTING, this can be metis parameter conditions be started again. That is, this should not for triggering event 2Bhandovers at usedwhen the quality of the target frequency is to evaluate inter-frequency only parameter is usually set higher than the trigger the RNC. this threshold. If the value of [Interhigher than threshold for eventprevent ping-pong the After handover, to 2D or equal tois set to frequencyof event 2F. threshold measure report mode] handover, the inter-frequencythis parameter is PERIODICAL_REPORTING, measurement should not be started again. Thathandovers at used to evaluate inter-frequency is, this parameter is usually set higher than the trigger the RNC. threshold for eventprevent ping-pong After handover, to 2D or equal to the threshold of event 2F. handover, the inter-frequency measurement should not be started again. That is, this parameter is usually set higher than the trigger threshold for event 2D or equal to the threshold of event 2F.
SET MTP3TMR(Optional)
SET MTP3TMR(Optional)
SET MTP3TMR(Optional)
SET MTP3TMR(Optional)
SET URACHMEASUREPARA(Optional)
EXP DEVFILE(Optional)
decision threshold; of 3 dB for compensation of fast fading, 5 dB jitters. Cell Individual Offsetslow fading, 2 dB foroffset for compensation a GSM mobile phone is -102 of Number of the output (CIO) indicates the The sensitivity ofcell; segment of the inter-RAT interference noise, and 2 dB compensationdescribes the basic information 1: Segment 1 of dBm, so the outdoor reception level should not H the equipment. of ambient noise. forrepresents the hysteresis. Hysteresis can of lower than -90 dBm, considering a margin be compensation reduce The dB wrong describes caused bydecision 2: Segment of inter-RAT the fast fading, 2 decisions handover signal of 3 valuescompensation of connection 5 dB jitters. for thresholds vary with slow fading, 2 policy. To the information. for compensation a GSMhandover dB for -102 The sensitivitydescribes the module cells with of of have UEs hand over onlymobile GSM is2 dB to the phone 3: Segment 3 compensation of interference noise, should not dBm,quality, outdoor reception level and so the you can set the inter-RAT high information. for lower than -90 of ambient noise. a margin compensation beSegment 4 describes the configuration handover decisiondBm, considering threshold to a 4: values of inter-RAT handover decision The dB for compensation of fast fading, 5 dB of 3 comparatively high value, for example -85To information. thresholds vary with slow fading, 2 policy. the forSegment 5 describes handover dB for dBm. UEs hand over only to information of the 5: compensation of the the GSM cells with have compensation of interference noise, and 2 dB peer equipment. high quality, you canambient inter-RAT set the noise. forSegment 6 describes the version 6: compensation of handover decision threshold to a decision The values of inter-RAT handover information of the host. for example -85 comparatively high value, thresholds vary with the handover policy. To 7: Segment 7 describes the dBm. UEs hand over only to cabinet cells with have the GSM information. high quality, 8 describes the subrack you can set the inter-RAT 8: Segment handover decision threshold to a information. comparatively describes the board information 9: Segment 9 high value, for example -85 dBm. and electronic label information of the Flash. 10: Segment 10 describes the slot information. 11: Segment 11 describes the port information. 12: Segment 12 describes the antenna information. This parameter specifies the number of Machs transport block indexes that can be the in This parameter defines the number of used HS-SCCH Less Operation mode. the TF 1 of transport blocks corresponding to the RLC size in the TF set. The parameter value should not be 0 if there is only one TF. For detailed information of this parameter, refer parameter defines the number of the This to 3GPP TS 25.302. transport blocks corresponding to the TF 1 of the above RLC size in the TF set. The parameter value should not be 0 if there is only one TF. This parameter defines the number of the transport blocks corresponding to the TF 1 of the above RLC size in the TF set. The parameter value should not be 0 if there is only one TF. This parameter defines the number of the transport blocks corresponding to the TF 2 of the RLC size in the TF set. For detailed information of this parameter, refer to 3GPP TS 25.302. This parameter defines the number of the transport blocks corresponding to the TF 2 of the above RLC size in the TF set. This parameter defines the number of the transport blocks corresponding to the TF 2 of the above RLC size in the TF set. of the This parameter defines the number transport blocks corresponding to the TF 3 of the RLC size in the TF set. For detailed information of this parameter, refer to 3GPP TS 25.302.
SET UHSSCCHLESSOPPARA(Optional)
ADD UFACHDYNTFS(Optional)
ADD UPCHDYNTFS(Optional)
ADD URACHDYNTFS(Optional)
ADD UFACHDYNTFS(Optional)
ADD UPCHDYNTFS(Optional)
ADD URACHDYNTFS(Optional)
ADD UFACHDYNTFS(Optional)
SET UHSSCCHLESSOPPARA(Optional)
This parameter specifies the index of the Machs transport block size that can be used in HSSCCH Less Operation mode. The mapping between the index and the transport block size is defined in thespecifies the of 3GPP the MacThis parameter Appendix A index of TS 25.321. hs transport block size that can be used in HSSCCH Less Operation mode. The mapping between the index and the transport block size is defined in thespecifies the of 3GPP the MacThis parameter Appendix A index of TS 25.321. hs transport block size that can be used in HSSCCH Less Operation mode. The mapping between the index and the transport block size is defined in thespecifies the of 3GPP the MacThis parameter Appendix A index of TS 25.321. hs transport block size that can be used in HSSCCH Less Operation mode.After the Test code for the MTP3 link. The mapping between the index and the transport block size successful test, the link can be used for is defined in the Appendix AIfof 3GPP fails, the carrying signaling services. the test TS 25.321. MTP3 periodically sends the fault locating command until the operation is successful. When the link is deletedSystem Frame the Difference between the or deactivated, system stops toand NodeB Frame Number Number (SFN) send the fault locating command. The default value iscell belongs to. (BFN) of the NodeB which the 170. It is recommended that Tcell of difference cells under one NodeB should be unique. For detailed information of this parameter, refer to 3GPP TS 25.433.
SET UHSSCCHLESSOPPARA(Optional)
SET UHSSCCHLESSOPPARA(Optional)
SET UHSSCCHLESSOPPARA(Optional)
ADD MTP3LNK(Optional)
HO UCELL(Optional)
ADD MTP3LNK(Optional)
Test code length of the signaling link. By default, the value is 10. Maximum duration of cell reselection. This parameter, along with the [Max number of cell reselection], is used for rate evaluation in HCS. For details, refer to 3GPP TS 25.304. Time before reverting to low-mobility measurement. For detailed information of this Hysteresis time before non-HCS resuming parameter, refer to 3GPP TS in high-speed slow movement. When UE is 25.304. movement, if the number of cell reselections is less than Ncrnonhcs, the UE resumes to slow movement. For detailed information, refer to Maximum duration of non-HCS cell 3GPP TS 25.304. number of cell reselection reselection. If the exceed the value of this parameter during Tcrmaxnonhcs, the UE is not in high-speed movement. For detailed information, refer to 3GPP TS 25.304.
ADD UCELLHCS(Optional)
ADD UCELLHCS(Optional)
ADD UCELLSELRESEL(Optional)
ADD UCELLSELRESEL(Optional)
Cycle timer for deciding whether the UE is in low-mobility state. This timer provides the time for the RNC to decide whether the UE is in low-mobility state. The smaller the value is, the more frequently the state estimation is triggered. If the parameter is set to 0, it is an indication that the state estimation is not triggered.
ADD EMU(Optional)
ADD EMU(Optional)
Offset of HCS cell CPICH RSCP measurement Lowerin cellof temperature value limit selection or reselection. The larger the value of the parameter, the lower the probability of selecting neighboring cells. The smaller the value measurement Offset of cell CPICH Ec/No of the parameter, the higher the probabilityreselection. value in cell selection or of doing so. The larger the value of the parameter, the This parameter is valid when the lower the probability of selecting neighboring corresponding parameter related to the cells. Theperiod unit for the event E of AMRthe reporting smaller the value the parameter, higher theset to TEN_MSEC. The DL code TX service is probability of doing so. power is reported valid when the the event This parameter is periodically after Ea is reported. parameter related to the the corresponding This parameter specifies reporting period.unit for the event is setBE A, reporting period If the parameter E of to the reporting period is A x 10 ms. DL code TX service is set to TEN_MSEC. The power is reported valid when the the event This parameter is periodically after Ea is reported. parameter related to the the corresponding This parameter specifies reporting period.unit for the event is set to A, reporting period If the parameter F of BE the reporting period is A x 10 ms. DL code TX service is set to TEN_MSEC. The power is reported periodically after the event Fa is reported. This parameter specifies the reporting period. If the parameter is set to A, the reporting period is A x 10 ms. DL basic common measurement report cycle. For detailed information of this parameter, refer to 3GPP TS 25.433. Measurement report period of event E triggered by DL OLC. For detailed information of this parameter, refer to 3GPP TS 25.433. Measurement report period of event E triggered by DL OLC. For detailed information of this parameter, refer to 3GPP TS 25.433.
SET ULDM(Mandatory)
SET USATLDM(Mandatory)
This parameter specifies the HSDPA bit rate measurement report period. For detailed information of this parameter, refer to 3GPP TS 25.433. HSDPA power requirement measurement report period For detailed information of this parameter, refer to 3GPP TS 25.433. This parameter specifies the HSUPA bit rate measurement report period. For detailed information of this parameter, refer to 3GPP TS 25.433. UL basic common measurement report cycle. For detailed information of this parameter, refer to 3GPP TS 25.433. This parameter is valid when the Measurement report period of eventthe corresponding parameter related to E triggered by UL OLC. For detailedE of VP reporting period unit for the event information of this parameter, refer to 3GPP TS 25.433.TX service is set to TEN_MSEC. The DL code power is reportedestimating whether the UE is Time window for periodically after the event Eahigh-mobility This parameter specifies the in is reported. state. reporting point of If the parameter is set to A, The start period. the estimation is the moment the reporting period of A x 101D, and the of the last reporting is event ms. backdated time indicates determined by this This parameter length is whether the parameter. If the parameter is set tothe the SCCPCH involves the TFCI. When 0, RNC does not decide whether the UE is in downlink blind transport format detection high-mobility state. TFCI is unavailable. For function is used, the detailed information of this parameter, refer to 3GPP TS 25.433. Note: This parameter is configured only for the SCCPCH in the formats 8 to 17. This parameter defines the number of the transport formats corresponding to the RLC size in the TF set. For detailed information of this parameter, refer to 3GPP TS 25.302. This parameter defines the number of the transport formats corresponding to the above RLC size in the TF set.
SET ULDM(Mandatory)
ADD USCCPCHBASIC(Mandatory)
ADD UFACHDYNTFS(Mandatory)
SWP OMUAREA(Mandatory)
Target OMU
ADD TGWIP(Mandatory)
TGW ID
ADD TGWIP(Mandatory)
This parameter indicates the address of the operation and maintenance console for TGW.
ADD TGWIP(Mandatory)
This parameter indicates the mask of the operation and maintenance console for TGW.
ADD TGWIP(Mandatory)
ADD TGWIP(Mandatory)
Subrack DCH is set the BSC6900 interface When a number of up, the UE starts counting board interworking with TGW. the number of faulty CRCs within a specified sliding window. If the number of faulty CRCs exceeds the specified threshold, event 5A is triggered. The power is higher than the Ea If DL code TX threshold is Event 5A Threshold. absolute threshold, event Ea is triggered. This event triggers DL QoS operation. This parameter specifies a relative threshold. Absolute Ea threshold = RL Max DL TX power If DL code TX power is lower than the Eb - ThdEa. threshold, event Eb is triggered. absolute When this event report is received, DL QoS operation is stopped. This parameter specifies a relative threshold. AbsoluteTraffic Handling This parameter specifies the Eb threshold = RL Max(THP) of the RAB assignment, which is Priority DL TX power - ThdEb. defined only for interactive service. The value 1 means the highest priority, the value 14 means the lowest priority,the priority class This parameter specifies and the value 15 means no priority. interactive service whose associated with PS THP(Traffic Handling Priority) is 10. The priority class includes High, Medium and Low, which is used tospecifies the GBR forclass This parameter classify the priority PS interactive services.interactive service whose associated with PS THP(Traffic Handling Priority) is 11. The priority class includes High, Medium and Low, which is used tospecifies the GBR forclass This parameter classify the priority PS interactive services.interactive service whose associated with PS THP(Traffic Handling Priority) is 12. The priority class includes High, Medium and Low, which is used tospecifies the GBR forclass This parameter classify the priority PS interactive services.interactive service whose associated with PS THP(Traffic Handling Priority) is 13. The priority class includes High, Medium and Low, which is used to classify the GBR for PS interactive services.
ADD UTYPRABQUALITYMEAS(Mandatory)
ADD UTYPRABQUALITYMEAS(Mandatory)
ADD UTYPRABQUALITYMEAS(Mandatory)
SET USCHEDULEPRIOMAP(Mandatory)
SET UIAVUSERTHPCLASS(Optional)
SET UIAVUSERTHPCLASS(Optional)
SET UIAVUSERTHPCLASS(Optional)
SET UIAVUSERTHPCLASS(Optional)
SET UIAVUSERTHPCLASS(Optional)
This parameter specifies the priority class associated with PS interactive service whose THP(Traffic Handling Priority) is 14. The priority class includes High, Medium and Low, which is used tospecifies the GBR forclass This parameter classify the priority PS interactive services.interactive service whose associated with PS THP(Traffic Handling Priority) is 15. The priority class includes High, Medium and Low, which is used tospecifies the GBR forclass This parameter classify the priority PS interactive services.interactive service whose associated with PS THP(Traffic Handling Priority) is 1. The priority class includes High, Medium and Low, which is usedparameter specifies the PS interactive This to classify the GBR for priority class services. with PS interactive service whose associated THP(Traffic Handling Priority) is 2. The priority class includes High, Medium and Low, which is usedparameter specifies the PS interactive This to classify the GBR for priority class services. with PS interactive service whose associated THP(Traffic Handling Priority) is 3. The priority class includes High, Medium and Low, which is usedparameter specifies the PS interactive This to classify the GBR for priority class services. with PS interactive service whose associated THP(Traffic Handling Priority) is 4. The priority class includes High, Medium and Low, which is usedparameter specifies the PS interactive This to classify the GBR for priority class services. with PS interactive service whose associated THP(Traffic Handling Priority) is 5. The priority class includes High, Medium and Low, which is usedparameter specifies the PS interactive This to classify the GBR for priority class services. with PS interactive service whose associated THP(Traffic Handling Priority) is 6. The priority class includes High, Medium and Low, which is usedparameter specifies the PS interactive This to classify the GBR for priority class services. with PS interactive service whose associated THP(Traffic Handling Priority) is 7. The priority class includes High, Medium and Low, which is usedparameter specifies the PS interactive This to classify the GBR for priority class services. with PS interactive service whose associated THP(Traffic Handling Priority) is 8. The priority class includes High, Medium and Low, which is usedparameter specifies the PS interactive This to classify the GBR for priority class services. with PS interactive service whose associated THP(Traffic Handling Priority)TrafficThe priority This parameter specifies the is 9. Handling class includes class that the THP priority is is Priority (THP) High, Medium and Low, which used to classify the GBR foris valid for only mapped to. This parameter PS interactive services. services. The mapping relationship interactive between the traffic handling priority value of INTERACTIVE service and its corresponding class can be set through command SET UIAVUSERTHPCLASS.
SET UIAVUSERTHPCLASS(Optional)
SET UIAVUSERTHPCLASS(Optional)
SET UIAVUSERTHPCLASS(Optional)
SET UIAVUSERTHPCLASS(Optional)
SET UIAVUSERTHPCLASS(Optional)
SET UIAVUSERTHPCLASS(Optional)
SET UIAVUSERTHPCLASS(Optional)
SET UIAVUSERTHPCLASS(Optional)
SET UIAVUSERTHPCLASS(Optional)
SET UIAVUSERTHPCLASS(Optional)
SET UUSERGBR(Mandatory)
ADD TRMLOADTH(Mandatory)
ADD OP(Optional)
SET TIME(Optional)
Time
PING IP(Optional)
TRC IPADDR(Optional)
PING MAC(Optional)
Timeout time
TRC MAC(Optional)
BLK UCELL(Mandatory)
Specifying the time limitation for blocking a cell when normal priority is selected. This parameter defines the length of the interfreq coverage handover delay to affects the Timer_CU timer. The parameter trig. If the transport efficiency and transport delay. AAL2 inter-freq coverage handover priority of the reported inter-freq measure cells are equal to the highest priority, start inter-freq handover. If the inter-freq coverage handover priority of the reported inter-freq measure cells are lower Indicateshighest priority of the measure cells, than the the times of sending PING packets start the inter-freq coverage handover delay timer. When the timer expiry, start inter-freq handover. This parameter specifies the delay time to start the retransmission ratio monitoring after the RLC entity is established or reconfigured.
ADD AAL2PATH(Optional)
PING IP(Optional)
ADD UTYPRABRLC(Optional)
SET UINTERFREQHOCOV(Optional) ADD UCELLINTERFREQHOCOV(Optional) SET UINTERRATHOCOV(Optional) ADD UCELLINTERRATHOCOV(Optional) ADD UCELLMBDRINTERRAT(Optional) SET UINTERFREQHOCOV(Optional) ADD UCELLINTERFREQHOCOV(Optional) ADD UCELLMBDRINTERFREQ(Optional) SET UINTERRATHOCOV(Optional) ADD UCELLINTERRATHOCOV(Optional) ADD UCELLMBDRINTERRAT(Optional)
ADD UTYPRABDCCCMC(Optional)
ADD UTYPRABDCCCMC(Optional)
Time with but the slower the response ofbycall for hard handover triggered event decision, verified BSIC. for the event. For handovers, thus UE, the cells delaywrong the fast-moving preventing number of reports.of measured signals. periodicalisperiod of time specified by this 2F torate change sensitive to the trigger delay the more drop During the handovers. In addition, from the unnecessary existing emulation result, the Only the inter-frequency cell in which the call Based on thethe signal quality in a UE, time, whereas for the slow-moving neighboring parameter, if emulation perspective, theeffectively in all rates signalcell satisfies inter-RAT handover requirement reduce trigger qualitytime is set to UE at different delay meets drop reactis less sensitive to the trigger delay GSMrate differently thethe trigger delay time may to periodical reports during thewith most of is the average numberthe handovers andtime of cell period of the time. Therefore, forneighboring GSM cellthe conditions and the fast-moving for the event. For handovers, thus UE, the call the specifiedanwrongparameter can betriggered. as selected number of UEs, this handover can be preventing fast-movinginter-RAT parameteristrigger set verified, by this drop rate is more sensitive to the handover. the target cell in the inter-frequency areofdelay unnecessary handovers. celladdition, fromthe In with most as the smaller, whereas for the conditionsUE, the call The inter-RAT for the slow-moving handover time,larger perspective, the UE at different rates The whereas emulation the value of parameter can be set slow-moving UEs, this this parameter, delay follows: is less sensitive to the trigger the drop react differently to the trigger delay time lower The + CIO this parameter + H/2 but may rate valueof >= Tother_RATcan larger.probability for incorrect decision, ofbe the Mother_RAT time. Therefore, of the the handover to the slower the response of cell with most the call for the event.of the to fast-moving UE,cellthe For the the actual network adjusted according GSM neighboring be set If the quality UEs, this parameter fast-moving more sensitive to the can change ofis signals. drop rate measured condition, the system trigger statistics. preceding the cell with most ofdelay meets the smaller, whereas for slow-moving UE, the call Basedthe trigger timer. The system then the on the for the time, whereasexisting emulation result,GSM starts delay for triggering handovers tobe set Time delay UEs, this to effectively slow-moving time is setparameter canreduce trigger drop with is lesshandover to the trigger delay implementsvaluesensitive decision afterbe cells rate non-verified BSIC. larger. The the for the handovers and the the average number of cell with neighboring of parameter can time. Therefore, of thisthe GSM most of the timeout ifaccording to the specified by this During the wrong handovers, thus preventing period of adjustedofthe quality time actual networkset number fast-movingmeets this parameter condition be cell always parameter, UEs, the preceding can from the statistics. if the signal quality in a neighboring unnecessary handovers. celladdition, of the smaller, whereas forlength ofwith timer. The the In handover most throughout the time GSM cell satisfies inter-RAT the different rates emulation perspective, parameter can be set slow-moving UEs,trigger timer is called the not time lengthandthe this the UE at of the conditions differently to the trigger delay time may react value neighboring GSM cell is larger.trigger time.of this parametertriggered. can be delay The verified, an inter-RAT fast-moving UE, the call for the event. For time handover is the and hysteresis are adjusted accordingthisthe actual network used to parameter is 65535, the The delay value of trigger When theis more sensitive to the trigger delay drop rate statistics. mis-decisions caused by signal to to prevent RNC does not for the slow-moving UE, the call inter-RAT handovers time, whereas perform handover decisions. jitters during GSM cells. The inter-RAT non-verified less sensitive to higher the time-todrop rate is that the UE is on the edge delay the trigger Considering trigger parameters are, the smaller the of the time. Therefore, for the TimeToTrigForVerify cell with most of the system, number of handovers is, and the average the parameter fast-moving UEs, this parameter can value. be set should be set to drops increases. comparatively possibility of call afor the cell with low of the smaller, whereas cells of which the BSIC is most Because the GSM slow-moving UEs, this parameter can be set already verified usually have good larger. The value of this parameter can be performance, the parameter time from the This parameter specifies the adjusted according toshould be set to 0, which TimeToTrigForVerify the actual network moment when the traffic volume of the DCH statistics. that the handover is implemented indicates the upper threshold to the moment exceeds immediately. when the traffic-related event 4A on DCH is The higher the parameter is used to avoid are, parameters triggered. This time-to-triggertime from the This parameter specifies the the smaller the average number of handovers unnecessary reports triggered byon the traffic moment when the traffic volume DCH is, and the possibility of call drops valueDCH increases. volume fluctuation. The larger thethe moment of this falls below the lower threshold to parameter, the longer the required duration of when the traffic-related event 4B is triggered. the traffic volume exceeding the upper This parameter is set to avoid unnecessary threshold, and the smallertraffic fluctuation. reports triggered by DCH the possibility of triggering traffic-relatedthis parameter, the The larger the value of event 4A on DCH. longer the required duration of the traffic volume keeping below the lower threshold, and the smaller the possibility of triggering trafficrelated event 4B on DCH. number of This parameter specifies the consecutive periods during which the percentage of retransmitted RLC PDUs is higher than the threshold of event A before event A is triggered. This parameter specifies the number of consecutive periods during which the percentage of retransmitted RLC PDUs is lower than the threshold of event B before event B is triggered. When the operation time of the OMU exceeds the value specified by this parameter, some records are deleted from the operation log.
ADD UTYPRABRLC(Optional)
ADD UTYPRABRLC(Optional)
SET LOGLIMIT(Optional)
ADD SUBTSK(Mandatory)
When the time mode is set to "ONTIME", you should set this parameter.
ADD SUBTSK(Mandatory)
If the time mode is set to "DAILY_T", "WEEKLY_T", or "MONTHLY_T", you should set this parameter. This parameter specifies the first execution time in the day in which the scheduled mode is set to "DAILY_T", If the time task is executed. "WEEKLY_T", or "MONTHLY_T", you should set this parameter. This parameter specifies the second execution time in the day in which the scheduled task setexecuted. If the time mode is is to "DAILY_T", "WEEKLY_T", or "MONTHLY_T", you should set this parameter. This parameter specifies the third execution time in the day in which the scheduled mode is set to "DAILY_T", If the time task is executed. "WEEKLY_T", or "MONTHLY_T", you should set this parameter. This parameter specifies the fourth execution time in the day in which the scheduled task setexecuted. If the time mode is is to "DAILY_T", "WEEKLY_T", or "MONTHLY_T", you should set this parameter. This parameter specifies the fifth execution time in the day in which the scheduled task is executed.
ADD SUBTSK(Optional)
ADD SUBTSK(Optional)
ADD SUBTSK(Optional)
ADD SUBTSK(Optional)
ADD TRMMAP(Mandatory)
TRMMAP index
ADD ADJMAP(Mandatory)
ADD ADJMAP(Mandatory)
ADD ADJMAP(Mandatory)
SET ALMBLKPARA(Optional)
Gold user TRMMAP index used by the current adjacent node Maximum rate of the accumulated alarm blink duration to the alarm blink measurement period. Assume this threshold is not 0. When Silver user accumulated alarm blink duration the rate of TRMMAP index used by the current adjacent the threshold, an alarm is reported. exceeds nodeof the accumulated alarm blink Minimum rate For querying the alarm blink measurement duration to the alarm blink measurement period, see "LST ALMBLKSW". For setting the period. Assume this threshold is not 0. When alarm blinkaccumulated alarm blink duration is the rate of measurement period, see "SET ALMBLKSW". threshold, an alarm is reported. lower than the For querying the alarm blink measurement period, see "LST ALMBLKSW". For setting the alarm blink measurement period, see "SET ALMBLKSW". This timer is a protection timer waiting for a signalling link test acknowledgement message (SLTA) from the peer end after a signalling link test message (SLTM) is sent to the peer end.
SET ALMBLKPARA(Optional)
SET MTP3TMR(Optional)
SET MTP3TMR(Optional)
This timer is used to send the signalling link test messages (SLTM) to the peer end regularly.
CMP TBLDATA(Mandatory)
ADD UNRNC(Mandatory)
ADD UCNNODE(Optional)
ADD UNODEB(Optional)
SET TZ(Mandatory)
End point of the arrival window of DL data Offset to DST, namely, the adjustment DLtime. frame. Normally, it is forecasted that a to data frame will arrive before the time specified by this parameter. The value of this parameter is a positive value relative to latest time ofof A positive value relative to Latest Time arrival (LTOA). Arrival (LToA). It indicates the endpoint of the arrival time window for a downlink data frame. Normally the downlink data frame arrives before that time.For detailed information of this parameter,of the to 3GPP TS 25.402. data Start point refer arrival window of DL frame. Normally, it is forecasted that a DL data frame will arrive after theto Time of arrival this A positive value relative time specified by parameter. The value of thisIt indicates the window endpoint (ToAWE). parameter is a positive value relative to ToAWE. for a startpoint of the arrival time window downlink data frame. Normally the downlink data frame arrives after that time.For detailed Type of the host log to be collected. information of this parameter, refer to 3GPP If this parameter is set to NORMAL, the text TS 25.402. log in the \common\fam\famlog directory of the The cell is shut down is collected and saved in OMU installation path automatically only when the total user number is no greater of thethe the \common\fam\famlog directory than OMU threshold. The total user number consists of installation path. the DCH and CCH user numbers. the binary If this parameter is set to FORMAT, log in the \common\fam\famlogfmt directory of the OMU installation path is collected and saved in the \common\fam\famlogfmt directory of the OMU installation path.
ADD UCELLDYNSHUTDOWN(Optional)
COL FAMLOG(Mandatory)
HCS cell reselection penalty timer. The larger the value of the parameter, the longer the HCS penalty time. The smaller the value of the parameter, the shorter the HCS penalty time. CPU usage threshold for debugging tracing flow control. When the average CPU usage of sliding windows reaches or exceeds the threshold, debugging tracing flow control is triggered. Packet queue usage threshold for debugging tracing flow control. When the average packet queue usage of sliding windows reaches or exceeds the threshold, debugging tracing flow control is triggered. for recovery from CPU usage threshold debugging tracing flow control. When the average CPU usage of smooth windows is lower than the threshold, debugging tracing flow control is stopped. Packet queue usage threshold for recovery from debugging tracing flow control. When the average packet queue usage of smooth windows is lower than the threshold, debugging tracing flow control is stopped.
SET FCCPUTHD(Optional)
SET FCMSGQTHD(Optional)
SET FCCPUTHD(Optional)
SET FCMSGQTHD(Optional)
SET FCSW(Optional)
Whether to control the debugging tracing flow This parameter specifies the traffic class. Based on Quality of Service (QoS), there are four traffic classes: conversational, class that This parameter specifies the traffic streaming, interactive, and background. the service belongs to. The traffic class here only includes interactive and background, and the SPI(Schedule Priority Indicator) of the other classes such as conversational or streaming are configured by default values. This parameter specifies the traffic class that the service belongs to. BE services are of three classes: interactive, background and IMS signalling.
ADD UTYPRABBASIC(Mandatory)
SET USCHEDULEPRIOMAP(Mandatory)
SET UUSERGBR(Mandatory)
SET UDTXDRXPARA(Mandatory)
SET UFACHBANDWIDTH(Mandatory)
This parameter specifies the traffic type. This parameter specifies the traffic class. According to the QoS requirements of services, there are four traffic classes: conversational, streaming, interactive, and background.
SET UHSSCCHLESSOPPARA(Mandatory)
SET UUSERHAPPYBR(Mandatory)
ADD UCELLREDIRECTION(Mandatory)
SET UREDIRECTION(Mandatory)
ADD M3LKS(Optional)
ADD UCELLOLC(Optional)
Transfer Common Channel User number Traffic range: of the M3UA link set. At present, Value mode 0~10 This the active/standby and load sharing mode specifies the only parameter the system is traffic class. and Content: When overloaded is available.users on the DCH can be congested, If the M3UA links inCCH in order to reduce the reconfigured to the the link set work in overriding mode, onlythe the traffic type for the Thisload and recover one link in the link set cell parameter specifies system. worksredirection of mode, is all other links RRCmechanism algorithm.and that an action is The in the active the OLC work in thein each [OLC period] and some performed standby mode. In this case, only the active link carries traffic, and the standby services are selected based on the action rules links do not carry any traffic. When thedefines to perform this action. This parameter active Thisis faulty, thespecifies the traffic type for the parameter standby link with the highest link maximum number of users selected in the RRC redirection algorithm. priority is automatically activatedCCH. over executing reconfiguration to the to take as the active link. If the parameter value is too high, the OLC If the M3UAfluctuatethe link set work in loadaction may links in greatly and over control sharing mode, all the of overload and link set may occur (the state M3UA links in the work in active mode and carryextreme--under congestion turns into another traffic. load). If the parameter value is too low, the OLC action has a slow response and the effect is not apparent, affecting the OLC performance. This parameter specifies the round-trip transport delay of Iub interface when the transmission mode is ATM transmission or of IP dedicated network.
ADD UNODEB(Optional)
ADD ADJNODE(Mandatory)
Transport type
ADD IPPATH(Mandatory)
ADD ADJMAP(Mandatory)
ADD TRMMAP(Optional)
Transport type
ADD TRMLOADTH(Mandatory)
Transport type
ADD UBCH(Optional)
ADD UTYPRABHSPA(Mandatory)
ADD UTYPRABOLPC(Mandatory)
ADD UTYPRABRLC(Mandatory)
ADD UCELLSELRESEL(Optional)
Uniquely identifying a FACH in a cell. Configured according to the product specifications. If the signal quality (CPICH Ec/No measured by the UE) of a neighboring cell is better than that of the serving cell during the specified time of this parameter, the UE reselects the neighboring cell. It isaused to avoid ping-pong Uniquely identifying PCH in a cell. reselection between different cells. Note that the value 0 corresponds to the default value defined in the protocol. Set the parameter as follows: Uniquely identifying an RACH in a cell. when 1. Ensure that the UE can reselect a cell crossing the non-soft-switch area of the cell and that the UE timely performs location Related length for 1D records in the best cells. updates, cell updates, or URA updates when This parameter specifies the type of transport In the speed estimation algorithm, an algorithm necessary. channel. to avoid inaccurate estimation is adoptedthat the UE does not reselect a cell 2. Ensure caused is in the soft-switch area of the cells.In when it by frequent handovers of best cell. Thatway, the unnecessary location updates, this is, during the latest [TRELATELENGTH], if more than and URA 1D of type ofavoided. a are uplink Thisupdates,one event updatescertain cell cell parameter specifies the local transport This parameter specifies theis restored to the occurs, the event 1D record transporttype fordifference between cells this channel fortypical traffic. When that the typical RAB. 3. Consider the the channel state when the areas, for example the cells the cover different 1st event 1D occurs during typical[TRELATELENGTH]. The given time to the latest traffic is applied on UL, it refersdensely covering highways and cells covering typical UL transport by this parameter. If the value is channel type. When this length is set populated areas. TIf theitparameter is DL traffic islarge, the RNC judges a to the set to a DL, refers non-frequently set too applied onvalue, the ping-pong comparatively low transport channel type. changing best cell change as The parameter reselections may be caused. a frequently changing one by mistake. If the value is set too can be increased in populated area and small, the speed estimation algorithm may be reduced in high-speed movement. If the invalid. It isis set to a comparatively valuevalue, parameter recommended that this high be set according to thedelayradius. the cell reselection cell may become excessively high, and thus cell reselections may be affected. For detailed information, refer to 3GPP TS This parameter indicates the UE reselection 25.304. the CELL_FACH connection mode. delay in This parameter is not configured when the value is 255. Instead, the Treselections parameter is used. For detailed information, This parameter indicates the UE reselection refer to 3GPP TS 25.304. URA_PCH delay in the CELL_PCH or connection mode. This parameter is not configured when the value is 255. Instead, the Treselections parameter is used. For detailed information, refer to 3GPP TS 25.304.
ADD UCELLSELRESEL(Optional)
ADD UCELLSELRESEL(Optional)
ADD ATMTRF(Mandatory)
Traffic index
SET USMLC(Mandatory)
Delay to trigger the event 1A. The value of this parameter is related to slow fading.
SET USMLC(Mandatory)
SET UINTRAFREQHO(Optional) ADD UCELLINTRAFREQHO(Optional) SET UINTERFREQHONCOV(Optional) ADD UCELLINTERFREQHONCOV(Optional) ADD UCELLMBDRINTERFREQ(Optional)
SET UINTERRATHOCOV(Optional) ADD UCELLINTERRATHOCOV(Optional) SET UINTERRATHONCOV(Optional) ADD UCELLINTERRATHONCOV(Optional) ADD UCELLMBDRINTERRAT(Optional)
TrigTime1D to 1280set to comparatively1F640 be Table 1. Typical time-to-trigger of 1B Reducing 240~640 accordingrecommended value high TrigTime1B can50 (km/h):actual ms. is is of adjusted (ms), todeleting range or the 2560 network At the speed ofthe ofms or the cells in the active values; of TrigTime1A can decrease the call various channels (ms). the events recommended value is 640 the value statistics. (ms), the 240~640 1F) 5 (km/h): the range is set typical configuration enough time the At the when of require fewer ping-pong For (1B and there isthe recommendedfor range drops speed cell, not of 1B or 1F: For the (ms). macro the initial settings of TrigTime1B handovers,(ms), the recommended value isof so 640~1280 range the recommended is 640~1280 (ms),is (km/h): the range value performing handover. Increasing the value is adjustment of 120 TrigTime1A At the(ms). same as as follows: and can be is can bespeedresults in decreasing of the the 1280 1. Typical time-to-trigger of 640 (ms).(ms), the recommended 1B or 1F640 TrigTime1B Table 240~640 according(km/h):actual networkis of value adjusted number of handovers, thus is At the speed of 50 the the the range part of the For the channels averagemicro cell, to time-to-trigger should be various (ms). statistics. correspondingly. ping-pong 240~640 (ms), the recommended value shortened resulted from the1B or 1F: theis 640 call typical configuration of range is drops At the speed of 5 (km/h): the For the macro cell, the recommended range For (ms). If the handover is eliminated. But, time, set is handover can bethe recommended value is 640~1280 (ms), is asrecommended value is 640~1280 (ms),not triggered in these the adjustment range causefollows: range the SHO At the(ms). of 120 speed TrigTime1A may (km/h): the adjustments to 200 ms or 100 ms, and is the growth 1280 1. Typical time-to-trigger of of set of 640 (ms).(ms), the recommended 1B or 1F640 Tableand the over use of the forwardReducing 240~640 value TrigTime1B of1280 ms or the range should ratio, speedtocell, the time-to-trigger is is be At the channels For the micro 50 (km/h): 2560 ms. various of TrigTime1A can decrease the call (ms). the value (ms), the recommended value is 640 resources. correspondingly. 240~640 shortened configuration of 1B or 1F: the range At the when of 5 speed For typical there is not enough time dropshandover is (km/h): the range isfor (ms). If the 640~1280 handover. recommended value the recommended value is is 640~1280 (ms),not triggered in time, set is the performing(ms),120msIncreasing the value of At the(ms). of TrigTime1A to 200 (km/h): the range is or 100 ms, and set 1280 speedresults in decreasing of the 640 (ms).(ms), the recommended value is 640 TrigTime1B to 1280 ms or 2560 ms. Reducing 240~640trigger the(km/h):1B. The value TrigTime1B of 50 the time-to-trigger is of this Delay to number of handovers,range part of the At the speed cell, event the thus should be For the averagemicro (ms). the value (ms), the recommended value is call parameterresulted fromslow ping-pong the 640 related to can decrease 240~640 correspondingly. fading. shortenedof TrigTime1A the1B or 1F: the range call typical isthere is not enough time for For drops configuration of dropshandover is not triggered in time, set when (ms). If the handover can be eliminated. But, the value of is 640~1280 (ms), the Increasing these performing handover. recommended value is At thedelay may cause the growth TrigTime1Atoof200 ms or event range is adjustments totrigger(km/h): the 2C. of the SHO Time speed 120 decreasing and set 640 (ms).(ms), the inthe 100 ms, value TrigTime1B results recommended of the is 640 240~640 thethis parameter correlates with TrigTime1B cell, use of the forwardReducing 1280 ms or 2560 ms. ratio, and oftoover the time-to-triggerpart of the The value For the number of handovers, thus should be averagemicro (ms).fading. TrigTime1A can decrease the call the value of resources.resulted from the ping-pong slow shortened configuration of call typical correspondingly.1B ortime the range For drops the dropshandovervalue notthis parameter, the enough time, set The largercan be eliminated. But, 1F: for If the when there notofrecommended value is is is handover handover. triggered in the value of is 640~1280 (ms), incorrect decision, but performing to 200 the Increasing these the lower delay mayof ms or event 2D. TrigTime1Ato trigger thethe growth of the SHO adjustments results in decreasing of the Time probability cause 100 ms, and set 640 (ms). response of TrigTime1B to 1280 msevent 2F ms. Reducing slower the of to the change TrigTime1B over use of the forwardshould be ratio, and thethis ofthe time-to-triggerpart of the The value For the microsignals. or 2560thus with cell, handovers, average number parameter correlates the call of measuredThe larger the value of TrigTime1A can decrease resources.resulted fromthe value of this slow fading. shortened the existing emulation result, the call drops correspondingly. ping-pong Basedwhenthe lowernot the on dropsdelay to trigger theenoughin time, set is triggered 3A. for Time handover is eliminated. But, these event time parameter, If the delaythere not probability of incorrect handover can be is set to effectively value of trigger but timeslower the responsereduce performingofto 200 msIncreasing the of event The value may parameter correlates set this cause 100 ms, and with decision, handover.thethe growth of the SHO the TrigTime1Ato trigger handovers adjustments results inof or event 2F. and the Time delay number decreasing of the the tofading. The larger the value of this TrigTime1B to 1280 measured signals. slow and change of msof the forwardReducing 2F average this parameter correlates with TrigTime1B ratio, thenumber of handovers, ms. The value the over use or 2560thus part of the number the existing emulation result, the handovers, thus preventing average ofofthe lower the can decrease the call parameter,of Based on wrong larger the value of this the value TrigTime1A incorrect decision resources.resulted from the addition, from the slow fading.but the slowerIn ping-pong of the unnecessaryThe set to effectively call drops value isis not enough time for probability, tohandovers. event 3C. reduce the hysteresis there dropsdelay the lower the the response rates Time when be eliminated. But, different parameter, trigger probability change. incorrect emulationto measurement signalofthesenumber perspective, handover can event 3Anumber of handovers at the value of average but this slowerthe UE and the with performingdifferently to the hysteresis of event The value of may parameter response value for correlates decision, handover. Increasing result, the may react thethe cause the growth of the SHO adjustments existing decreasing of the Based on results inthus preventingthe of wrong handovers,measured signals. TrigTime1B theof emulation ofthe slow fading. The larger of the forward call the 2F event. Forover use to value the to the the handovers. effectively reduce the ratio, and changeisfast-moving UE, this of the hysteresis value of set In addition,part the unnecessary existingthe incorrect decision average number sensitive to the hysteresis parameter, more handovers, thus from Based on is the lower emulation result, number the drop ratenumber of handovers at different rates resources.the average emulation perspective, to effectivelythe call drops resulted fromthethe response of the ping-pong probability, but the the theUE and UE, the hysteresis valuefor set slow-moving reduce the is slower preventing value, whereas of wrong handovers, to thesignal change. for may reactto measurement hysteresis number handoverrate is lesshandoversto thethevalue be eliminated. and event 3C differently thus average number of sensitiveBut, these the call event. canhandovers. In addition,hysteresis unnecessarymay cause the growth thethe SHO the drop handovers, thus preventing from For adjustments existing emulation result,call Based Therefore, for the cell where of the on the the fast-moving UE, fastof wrong perspective, the UE at different rates value. emulation the over set of the forward drop rate is moreis use to effectively reduce the ratio, and value dominant, to the hysteresis hysteresis are sensitive this parameter the unnecessary moving UEs handovers. In hysteresisfrom can may react differently to the addition,UE, the value, whereas for the slow-movingthevalue for resources. average number of handovers at different and number emulation perspective, the UE UE, the callrates be set smaller,the fast-movingtocell where the drop rate iswhereas for the For less thus call event. differently sensitive the hysteresis of wrong handovers, to the hysteresis value for may reactis more sensitivepreventingparameter slow-moving UEs are dominant, this drop rate can also reduceto the hysteresis value. ThisFor the fast-moving UE, the callthe unnecessary handovers. In ping-pong the bewhereas for the slow-movingparameter can event. larger. The valueaddition,UE, thefor of this from value, setperspective, the UE atTherefore, handovers or wrong handovers. different rates emulationis moreaccording to the actual dropbe rate is sensitive rate hysteresis can cell adjustedless the fast-moving hysteresis call react most of to the hysteresis value the drop differently sensitive to the UE, the for with may whereas for the slow-moving UEs, this value, This can also reduce ping-pong network statistics. set smaller, whereas for the value. parameter Forisbe fast-movingto the hysteresis the drop rate less call call event. canthe sensitive UE, the set the handovers or of the handovers. Thus, this cell with most wrong slow-moving hysteresis drop rate is can also reduceto the UEs, value.smaller for cells whereping-pong UEs This more sensitive fast-moving value whereasbe set larger. The value of this parameter can for the slow-moving UE, thefor value, handovers or wrong handovers. Therefore, for are dominant,isbe adjusted theto the hysteresis value to the parameter canwhereas set accordingbigger call cell with most of the fast-moving UEs, this the drop rate less sensitive are dominant. cells where can also reduce ping-pong slow-moving actual network statistics. UEs whereas for the value. Thiscan be set smaller, parameter of this parameter can be adjusted The value or wrong handovers. Thus, set the handovers cell with most of the slow-moving UEs, this according to the actual network statistics. UEs value smaller for cells where fast-moving parameter can be set larger. The value of this Because the report period of inter-frequencyfor are dominant, whereas set the value bigger parameter canis 480 ms, the trigger time the measurement be adjusted according to cells where slow-moving UEs are dominant. actual networkthan 480 ms is invalid. period shorter statistics. The value of this parameter can be adjusted The biggerto the actual network statistics. the according the time-to-trigger values are, lower the the report period of frequency is; but Because average handover inter-frequency the increase ofis 480 ms, the trigger time measurement the time-to-trigger values increases the risk of callms is invalid. period shorter than 480 drops. The bigger the time-to-trigger values are, the lower the average handover frequency is; but the increase of the time-to-trigger values increases the risk of call drops.
SET UHOCOMM(Optional)
To guarantee the power control performance within a time slot, that is, to ensure that the power control within a time slot is implemented based on all links in the active set, the ideal UE guarantee the power control performance To Rx-Tx time difference should be 1024 chips. a time the UE Rx-Tx time difference within When slot, that is, to ensure that the becomes greater than timepredefined power control within a the slot is implemented threshold,all links in will be triggered. For the based on event 6F the active set, the ideal definition and its related details, refer to the UE Rx-Tx time difference should be 1024 3GPP When the UE Rx-Tx time difference chips. TS 25.331 protocol. becomes smaller than the predefined threshold, event 6G will be triggered. For the definition and its related details, refer to the 3GPP TS 25.331 protocol.
SET UHOCOMM(Optional)
ADD ETHTRKLNK(Mandatory)
ADD UCELLSETUP(Optional)
Radio Link Failure Timer Duration. When the radio link set is in the synchronized state, Slot number of the aggregation member the NodeB starts the timer after it receives successive out-of-sync indications of the number defined by NOutsyncInd. The NodeB shall stop and reset the timer after receiving aggregationin-sync number successive group indications of the number defined by NInsyncInd. When the timer expires, the NodeB triggers the radio link failure process, and indicates which radio link set is out-of-sync.
TRM load threshold index. The TRM load threshold must be configured.
ADD IPPATH(Optional)
TRM load threshold index. The TRM load threshold must be configured.
ADD TRMLOADTH(Mandatory)
ADD FRALNK(Optional)
ADD IMAGRP(Optional)
ADD UNILNK(Optional)
ADD PPPLNK(Optional)
ADD MPGRP(Optional)
ADD ATMLOGICPORT(Optional)
ADD IPLOGICPORT(Optional)
HO UCELL(Optional)
ADD IPLOGICPORT(Optional)
STR IPCHK(Optional)
ADD ETHMEP(Mandatory)
Timeslot number
SET E1T1(Optional)
ADD FRALNK(Mandatory)
Bearer timeslot
ADD PPPLNK(Mandatory)
ADD MPLNK(Mandatory)
ADD TSCROSS(Optional) ADD SCHTSK(Mandatory) SET SCHTSKSW(Optional) ADD SUBTSK(Optional) ADD SUBCMD(Optional) STR SCHTSK(Optional)
Time window for deciding whether the UE is in Name of the state. low-mobility scheduled task. Every time the slow speed cycle timer times out, the RNC estimates whether the UE is in low-mobility state. The backdated time length is set by this parameter.
SET UMGWTST(Mandatory)
STR IPLOPTST(Optional)
SET UMGWTST(Mandatory)
PING IP(Optional)
TRC MAC(Optional)
Indicates the live time of the packet for CFM link tracing detection
ADD IPPATH(Mandatory)
ADD RSCGRP(Mandatory)
Transmit bandwidth
ADD ATMLOGICPORT(Mandatory)
ADD UEXT3GCELL(Mandatory)
This parameter indicates whether to activate TX diversity of the downlink common channel of the cell. This parameter indicates whether transmission diversity configuration of the cell's downlink common physical channels is activated.
ADD UCELLSETUP(Mandatory)
PING IP(Optional)
STR IPLOPTST(Optional)
ADD SAALLNK(Mandatory)
ADD AAL2PATH(Mandatory)
ADD IPOAPVC(Optional)
ADD VPCLCX(Mandatory)
RUN BATCHFILE(Mandatory)
SET CTRLFACTOR(Mandatory)
ADD UEXT3GCELL(Optional)
Indicates the interval between the two sent This parameter indicates the DL frequency of a PING packets cell. Depending on the value of [BandId], as shown Depending on the value of [Band indication], below: as shown below: Band1 Band1 Sending interval (ms) [10562-10838] Common frequencies [10562-10838] General frequencies: Special frequencies none Additional frequencies: none Band2 Band2 Common frequencies [9662-9938] General frequencies: [9662-9938] Special frequencies {412,the SAAL link 512, TX traffic record index of 437, 462, 487, Additional frequencies: 537, 562, 587, 612, 637, 662, 687} {412,437,462,487,512,537,562,587,612,637,6 TX traffic record index of the AAL2 Path on the Band3 62,687} out BSC6900 port (ATM layer PVC traffic). The Common frequencies [1162-1513] Band3index is configured in the ATM traffic traffic frequencies none Special frequencies: [1162-1513] General "LST ATMTRF"). table (see Band4 Additional frequencies: none Common frequencies [1537-1738] Band4 Special frequencies {1887, 1912, 1937, 1962, General frequencies: [1537-1738] 1987, 2012, 2037, 2062, 2087} Explanation of the finish type of the batch Additional frequencies: {1887, 1912, 1937, Band51987, index commands 2012, 2037, 2062, 2087} Sending traffic 1962, Common frequencies [4357-4458] 1. ANY_ERR_RETURN: If there is a command Band5 Specialexecution fails, the execution of the whose frequencies {1007, 1012, 1032, 1037, General frequencies: [4357-4458] 1062, commands is stopped and the execution batch 1087} Additional frequencies: {1007, 1012, Band6 of the file fails. 1032,1037, 1062, 1087}the low end VPL/VCL Sending traffic index of If all commands in the Common frequencies [4387-4413] 2. ALL_END_RETURN: Band6 Special frequencies {1037, 1062} batch filefrequencies: [4387-4413] General are executed in one operation, the Band7 execution of the file is successful no matter Additional frequencies: {1037, 1062} Common frequencies [2237-2563]in the whether there is execution failure Band7 Special frequencies {2587, 2612, process. frequencies: [2237-2563]2637, 2662, General 2687, 2712, 2737, 2762, 2787,2612, 2637, Additional frequencies: {2587, 2812, 2837, 2862, 2887, 2912} 2737, 2762, 2787, 2812, 2662, layer 2712, Upper 2687, application type, including CCP, Band82862, 2887, 2912} 2837, NCP, ALCAP, and operation and maintenance Common frequencies [2937-3088] Band8 link IPoAPVC Special frequencies none General frequencies: [2937-3088] Band9 Additional frequencies: none Common frequencies [9237-9387] Band9 Special frequencies none General frequencies: [9237-9387] BandIndNotUsed [0-16383] Additional frequencies: none BandIndNotUsed:[0-16383] Downlink UARFCN of a cell.For detailed information of this parameter, refer to 3GPP TS 25.433.
ADD UEXT3GCELL(Optional)
ADD UEXT3GCELL(Optional)
Common frequencies [2012-2338] 475 Special frequenciesbelongs2387, 2412, 2437, If the DL frequency {2362, to special 2462, 2487, 2512, 2537, 2562, 2587, 2612, frequencies, then 2637, 2662, 2687} Band2: Uplink UARFCN = Downlink UARFCN Band8 400 Common frequencies [2712-2863] UARFCN Band4: Uplink UARFCN = Downlink Special frequencies none 225 Band9 Uplink UARFCN = Downlink UARFCN Band5: Common frequencies [8762-8912] 225 Special Uplink UARFCN = Downlink UARFCN Band6: frequencies nonewhether to configure This parameter indicates BandIndNotUsed [0-16383] 225UL frequency of the cell. the Band7:indicates that the UL frequency need beTRUE Uplink UARFCN = Downlink UARFCN 225 reconfigured. For detailed information of this parameter, FALSE indicates that the UL frequency need refer toreconfigured. It is configured not be 3GPP TS 25.433. automatically based onUL frequency of the cell Indicating whether the the relationship between configured. frequencies. need be UL and DL TRUE indicates that the NULL indicates thatbe configured. FALSE UL frequency need the UL frequency remains unchanged. the UL frequency need not be indicates that configured. It is configured automatically according to the relationship between UL and DL frequencies. For detailed information of this UDP multiplexing mode of the receiving parameter, refer to 3GPP TS 25.433. party. The mode that does not support the function of compressing the RTP header indicates that the This timerparty supports the UDP MUX RTP receiving is started when an AAL2 signaling entity sends the peer node a request for header but not the functionthe compressing the UDP multiplexing mode of of sending party. If unblocking an AAL2 path. supports the RTP header. The mode support the function of the mode that does not that function of compressing the RTP header compressing the RTP header indicates that the indicatesparty the receiving UDP MUX RTPboth sending that supports the party supports the UDP MUX RTPfunction of compressing the header but not the header and the function of compressing the RTP header. RTP header. The mode that supports the function of compressing the RTP header indicates that the sending party supports both the UDP MUX RTP header and the function of compressing the RTP header. Switch for sending A-GPS assistance data in UE-assisted mode. This parameter specifies the GPS data to be sent. Switch for sending A-GPS assistance data in UE-based mode. This parameter specifies the GPS data to be sent.
ADD UCELLSETUP(Optional)
SET AAL2TMR(Optional)
ADD IPMUX(Mandatory)
ADD IPMUX(Mandatory)
SET USMLC(Optional)
SET USMLC(Optional)
SET USTATETIMER(Optional)
SET USTATETIMER(Optional)
A timer to RNC wait for the response to counter check in security mode procedure. Group to which the operator belongs. This parameter is used to limit the right of the operator.
ADD OP(Optional)
STR E1T1TST(Optional)
SET ALMPORT(Optional)
SET UADMCTRL(Optional)
SET UADMCTRL(Optional)
SET UFRCCHLTYPEPARA(Optional)
Unit time when the measured value of AMR Duration for the error code ratio test UL activity factor of the measurement condition keeps fulfilling the 6A1 R99 AMR conversational service. Signals might be before the event 6A1 is triggered. Event discontinuously transmitted because of the triggering is used for UL measurement. The activation detection of conversational service event limit for triggering an the measured Upper6A1 is triggered whenalarm of AMR Duration when the measuredservice. The and source changes of data value value is greater than the absolute upper keeps factor the 6A2 measurement signal activityfulfillingisWhen the eventratio ofcondition as the 6A1 is threshold 6A1. defined triggered. Event before the event 6A2 is transmission time to channel occupation time. triggered, is used for UL measurement. be triggering the AMR speech rate should The The activity factors of the same transport after lowered. Thetriggered when the measured measured value is reported event 6A2 channel theis be differentreporting and for the in value of AMR Durationmight when it fulfills greaterthe measuredUL and DL. conditions forabsolute upper value is than the keeps time specified by this parameter. The trigger fulfilling the 6B1 measurement condition threshold 6A2. When is triggered. Event before timeevent 6B1 the event 6A2 is trigger thethe AMR speech rate should be triggered, is is used to prevent the sudden triggering used for UL measurement. The change of themeasured value is reported after measured value for being lowered. Thetriggered when the measured event 6B1 is reported. when the measured value and for the Duration conditions for reporting of AMR it fulfills the than the absolute lower value is lower the 6B2 measurement condition keeps time specified trigger fulfilling When by this parameter. The threshold 6B1. 6B2 is triggered. Event before the is used to the event 6B1 is trigger timeevent speech rate should be prevent the sudden triggered, is used for UL measurement. The triggering the AMR changeThe measured value is reported after it of the measured value for being raised. event 6B2 is triggered when the measured reported. conditions for reporting and for the fulfills is lower than the absolute lower value thewhen the measured value of AMR Duration trigger time specified by this parameter. The threshold 6B2. the 6D the event 6B2 is When keeps fulfillingused to measurement condition trigger time is AMR speech rate should be prevent the sudden triggered, the before of event 6D is triggered. Event changethe the measured value reported after it raised. The measured value is for beingThe triggering is used for UL measurement. reported. conditions for reporting and for the fulfills 6D is triggered when the measured event the triggeris greater than the this parameter. The value time specified by absolute upper trigger time is Whento prevent the is triggered, threshold 6D. used the event 6D sudden change of the measured value for being The the AMR speech rate should be lowered. reported. value is reported after it fulfills the measured factor of the R99 background UL activity conditions for reportingbe discontinuously time service. Signals might and for the trigger specified bybecause of the activation detection transmitted this parameter. The trigger time is used to prevent the sudden change of the of conversational service and source changes measured valueThe being reported. defined as of data service. for activity factor is This parameter specifies the rate threshold for the ratio of signal transmission time to channel the decision to set up activity factors of the domain occupation coefficient. a PS larger the value of L3 filtering time. The The background/interactive servicebe different in same transport channel might on the DCH in this uplink. Only the stronger the smoothing the parameter, when the UL service rate UL and DL. higher the anti-slow-fading is effect and the equal to this threshold, or the higher than or specifies the rate threshold for This parameter lower capability, but the higherthe signal change DL service rateset up a PS domain than or equal to the the decision to is tracing capability. For detailed information up downlink threshold, the service on the DCH in service will be set of background/interactive thisDCH. Otherwise, the3GPP TS 25.433. on parameter, on uplink. Only refer to service is setrate is up the when Recommended value: the UL service CCH. According to the D6 threshold, or the product specifications, higher than or equal to this only the background/interactive services the DL service rate is higher than or equal to whose rate is lower than 16 kbit/s can be up downlink threshold, the service will be set carried on the CCH. Therefore, this parameter on DCH. Otherwise, the service is set up on can only be set to 16 kbit/s or 8specifications, CCH. According to the product kbit/s. only the background/interactive services whose rate is lower than 16 kbit/s can be carried on the CCH. Therefore, this parameter can only be set to 16 kbit/s or 8 kbit/s.
ADD UCELLFRC(Optional)
SET UFRC(Optional)
function is enabled, the uplink initial bit rate will be set to this value if the uplink max bit rate is higher than the initial bit rate.The larger this parameter to be set, the sooner max bit rate to be reached, but the bit rate is more likely to be declined when system congested, so it makes no sense to set this parameter too high. Contrarily,the smaller the parameter to be set, the more easily specifies the rate threshold for This parameter the BE traffic to be accessed at required bit rate. But to carry ULsetting will decision to use E-DCH over small PS domain take longer to adjust to services. When the background/interactive needed bit rate. maximum UL service rate is higher than or equal to this threshold, the service will be carried on E-DCH. Otherwise, it will be carried on DCH. when the measured value of BE Duration keeps fulfilling the 6A1 measurement condition before the event 6A1 is triggered. The trigger time is used to prevent the sudden change of the measured value for being value of BE Duration when the measured reported. keeps fulfilling the 6A2 measurement condition before the event 6A2 is triggered. The trigger time is used to prevent the sudden change of the measured value for being value of BE Duration when the measured reported. keeps fulfilling the 6B1 measurement condition before the event 6B1 is triggered. The trigger time is used to prevent the sudden change of the measured value for being value of BE Duration when the measured reported. keeps fulfilling the 6B2 measurement condition before the event 6B2 is triggered. The trigger time is used to prevent the sudden change of the measured value fordecision is only BE The admission control being reported. Duration when the measured value of for dedicated channels. For common channels, keeps fulfilling the 6D measurement condition some the event 6D is triggered. The trigger beforeresources instead of a special admission procedure are reserved. sudden change of time is used to prevent the In the UL, according for the current load factor the measured value to being reported. and the characteristics of the new call, the UL CAC algorithm predicts the new traffic channels load factor with the assumption of Length of the new call, then plus withuplink admitting smoothing filter window of the CAC. premeditated common channel UL load factor to get the predicted UL load factor. Then, compare it with the UL admission threshold. If the value is not higher than the threshold, the call is admitted; otherwise, rejected. This parameter specifies the compression Admission threshold of total cell uplink power. method that the NodeB supports in the uplink. This parameter is related to the target load of - SF/2: SF reduction by two the uplink schedule. - HIGHER_LAYER_SCHDL: higher layer scheduling users selected in a UL LDR CS Number of If both SF/2 and HIGHER_LAYER_SCHDL are domain inter-RAT SHOULDBE load handover. selected, the NodeB supports parameter are The target subscribers of this both of the compression methods in the Because the CS the CS domain subscribers. uplink. domain subscribers are session subscribers in general and they have little impact on load, you can set this parameter to a comparatively high value.
SET UFRCCHLTYPEPARA(Optional)
ADD UCELLCAC(Optional)
ADD UCELLCAC(Optional)
ADD UNODEBLMTPARA(Optional)
ADD UCELLLDR(Optional)
ADD UNODEBLDR(Optional)
Number of users selected in a UL LDR CS domain inter-RAT SHOULDBE load handover. The target subscribers of this parameter are the CS domain subscribers. Because the CS domain subscribers are session subscribers in Number of users selected in a UL LDR CS general inter-RAThave little impact on load, domain and they SHOULDNOTBE load you can set this parameter to a comparatively handover. The target subscribers of this high value.are the CS domain subscribers. parameter Becauseof users domain subscribers are Number the CS selected in a UL LDR CS session inter-RAT SHOULDNOTBEthey have domain subscribers in general and load little impact on load, you can set thisthis handover. The target subscribers of parameter to a the CS domain high value. parameter are comparatively subscribers. Because the CS domain subscribers are session subscribers in general and they have littlea BE service that has a low maximum rate, For impact on load, you can set this parameter algorithm is not obviously effective the DCCC to a comparatively high value. yet it increases algorithm processing. Thus, the traffic-based DCCC algorithm is applied to BE services whose maximum UL rate is greater than the threshold. This parameter specifiescoverage ofmode of Maximum UL rate when the UL FP the entire this is ensured under details of normal a BE cell type of RAB. For certain load. For mode and silent mode,a low maximum rate, thethe service that has refer to section 5.1.1 of 3GPP TS 25.427. not obviously effective yet it DCCC algorithm is increases algorithm processing. Thus, the coverage-based DCCC algorithm is applied to BE services whose maximum UL rate is This parameter specifies the uplink guaranteed greater (GBR) of threshold. bit rate than the the BE service. GBR is the minimum bit rate that the system can guarantee for the service after it accesses in. The GBR of none BE service is specified by the RAB assignment from the CN. If the HS-DPCCH carries ACK/NACK, the Uplink Credit Reserved CAC. If theFactor for system will not perform by Spread HSHandOver. SFOFF means that none perform DPCCH carries CQI, the system will of them are reserved for handover. to the resources CAC. This parameter refers reserved for the uplink HS-DPCCH carrying ACK/NACK. The corresponding threshold is the uplink limit capacity multiplied by this parameter. UL activity factor of the R99 interactive service. This parameter specifies the E-DCH data Signals might be discontinuously transmitted transfer mode of IMS signalling services. It is because of the activation detection of valid only whenservice and source changes of conversational IMS signalling services are mapped onto The E-DCH. factor is defined as data service. the activity the ratio of signal transmission time to channel occupation time. The activity factors of the same transport channel might be different in UL and DL. The UE can be selected to process load handover only when its bandwidth is less than this threshold.
ADD UCELLLDR(Optional)
ADD UNODEBLDR(Optional)
SET UDCCC(Optional)
ADD UTYPRABBASIC(Mandatory)
SET UUSERGBR(Optional)
ADD UCELLCAC(Optional)
ADD UCELLCAC(Optional)
SET UFRC(Optional)
SET UADMCTRL(Optional)
ADD UCELLLDR(Optional)
ADD UCELLLDR(Optional)
ADD UCELLLDR(Optional)
ADD UCELLLDR(Optional)
ADD UNODEBLDR(Optional)
ADD UCELLLDR(Optional)
ADD UNODEBLDR(Optional)
ADD UCELLLDR(Optional)
ADD UCELLLDR(Optional)
ADD UNODEBLDR(Optional)
ADD UCELLLDR(Optional)
ADD UNODEBLDR(Optional)
Value range: Enum{ NOACT (NO ACTION), BERATERED (BE TRAFF RATEcell could be The inter-frequencythe LDR is that an action is The mechanism of neighboring REDUCTION), QOSRENEGOload handover selected as the destination of and some performed in each [LDR period] TRAFF QOS (UNCONTROLLED REAL-TIME only when itsselected based on the action rules services are load remaining space is larger RE-NEGOTIATION), than this threshold. The lower the parameter to perform this action. This parameter defines CSINTERRATSHOULDBELDHO (CS is, the easier itnumber ofa qualified target cell the maximum is to find RABs selected in DOMAIN INTER-RAT SHOULD BE small value for the blind handover. Excessively LOAD executing uplink LDR-AMR voice service rate HANDOVER), of the parameter, however makes the target reduction. If the parameter value is too high, PSINTERRATSHOULDBELDHO (PS The cell LDR action may congestion status.DOMAIN the easily enter the fluctuate greatly and over INTER-RAT SHOULD BE LOAD higher the parameter is, the more difficult it is NOACT: No load (the state action is control may occurreshuffling of basic taken. HANDOVER), for the inter-frequency blind handover occurs. INTERFREQLDHO: another extreme--under congestion turns intoThe inter-frequency load CSINTERRATSHOULDNOTLDHO (CS handover INTER-RAT value is too low, the load). If the parameterSHOULD NOT BE DOMAIN is performed. Number of RABs selected in a UL LDR BEfor BERATERED: a slow response and the LDR action hasChannels are reconfiguredeffect LOAD HANDOVER), traffic apparent, affecting the LDR system, this the BE service. is not rate reduction. In the actual (PS PSINTERRATSHOULDNOTLDHO parameter can The renegotiation of QOSRENEGO: performance. be set on the basis on the QoS DOMAIN INTER-RAT SHOULD NOT BE actual uncontrollable real-time service is of the circumstances. If the high-rate LOAD HANDOVER)} subscribersRABs selected in a UL LDR BE performed. occupy a high proportion, set the Number of Physical unit: none parameter reduction. In the actual value. If the to a comparatively low The interCSINTERRATSHOULDBELDHO: system, this traffic ratesmoothing load reshuffling action Content: Length ofNOACT: Nofilter window of uplink is high-rate subscribers occupybasis of the RAT SHOULDBE loadon the a low proportion, parameter can be set handover of the CS taken. LDR. parameter to a comparatively high set thecircumstances. If the high-rate domain is performed. actual BERATERED: Channels are reconfigured for value. Because the basic congestion control PSINTERRATSHOULDBELDHO: The set the subscribers occupy a high proportion, interthe BE service to reduce rate. algorithm is designed to slowly decreaseIf the RAT SHOULDBE load handover of the PS parameter to a comparatively low value. cell QOSRENEGO: The renegotiation on the QoS load, you subscribers this parameter to a domain is need to setreal-timeaservice is high-rate performed. occupy low proportion, of the uncontrollable comparatively low to a comparatively high AMRRATERED (AMR service rate set the parameter value. performed to reduce service QoS. decreasing): Thereserved congestion control Threshold of SF setting in uplinkThe intervalue. Because the basicof the TFC subset CSINTERRATSHOULDBELDHO: credit LDR. and the negotiation of to slowly decreasethe SF The uplink credit LDR the service rate CS algorithm is designed is triggeredof thecan be RAT SHOULDBE load handover when cell performedperformed.to voice service. to factor corresponding this parameter to load, you need to AMR the uplink refer a domain is for the set For details, reserved CSINTERRATSHOULDNOTLDHO: The intercredit is higherlow value.uplink or downlink than comparativelythreshold in uplink credit LDR. 3GPP TS 25.331. the Reservedreserved threshold. The lowerCS RAT SHOULDBE load handover of theintercredit SF SF PSINTERRATSHOULDBELDHO: The the The uplink value is, the easier the credit only domain is performed. could be triggeredenters parameter credit LDR handover of the PS RAT SHOULDBE load when the SF factor corresponding to LDR PSINTERRATSHOULDNOTLDHO: The interthe congestion status, the easier the the uplink domain iscredit is higher than the uplink or performed. reserved triggered, andload easier the user RAT SHOULDNOTBE the handover of the action is PSINTERRATSHOULDNOTBELDHO: The downlink credit SF reserved threshold. PS domain is performed. load handover of experience is affected. A lower code resource inter-RAT SHOULDNOTBE TheCS domain is performed. thecauses a LDRLDR takes the actions in the trigger threshold, however, preset sequence and judges whether each The theis higher admission success rate because interPSINTERRATSHOULDNOTLDHO: action successful. reserved. The unsuccessful, the be resource is If an actionload handovershould RAT SHOULDNOTBE is parameter of the LDR turns on the next action. If an action is set based to the operator's requirement. PS domain is performed. successful, a parameter is setthe NOACT, or all The LDR takes the actions in to preset the preceding actions are taken, the action is sequence and has the same each downlink This parameterjudges whethercontent as the LDR is finished, and the system waits for successful. If an action is unsuccessful, the UlLdrFirstAction. The LDR. next triggering of next selected actions, is LDR turnsshould be unique. If an action to the the action. however, each action is performed by its Because a parameter is set to NOACT, or all successful, algorithm module, the are taken, the downlink the preceding actions LDR algorithm only selects finished,has the same content as the This parameter and the system waits for LDR is users and delivers control messages, the execution result ofselected actions, be UlLdrFirstAction. The LDR. action can next triggering of the each obtained each action is performed by its however, after a delay, and the LDR algorithm Because should be unique. cannot wait for a long time, algorithm only algorithm module, the LDR so the LDR can only judge whether the actions succeed by selects users and delivers control messages, This parameter hasusers are found. as whether candidate the same content be the execution result of each action can UlLdrFirstAction. The selected actions, no The inter-frequency load handover has obtained after a delay, and the LDR algorithm however, should beof users and can balance impact on the QoS unique.so the LDR can cannot wait for a long time, the cell load, so the the actions succeed by only judge whether inter-frequency load handover usually serves as the first action. whether candidate users are found. The BE service rate load handovereffective The inter-frequency decreasing is has no only when the QoS of algorithm is enabled. impact on the DCCC users and can balance the cell load, so the inter-frequency load handover usually serves as the first action. The BE service rate reduction is effective only when the DCCC algorithm is enabled.
ADD UCELLLDR(Optional)
ADD UNODEBLDR(Optional)
ADD UCELLLDR(Optional)
ADD UNODEBLDR(Optional)
Number of RABs selected in a UL LDR uncontrolled real-time traffic QoS renegotiation. The target subscribers of this parameter are has the same real-time This parameterthe PS domain content as subscribers. The setting of in a UL LDR is UlLdrFirstAction. The selected actions, Number of RABs selected this parameter analogous toreal-time traffic service rate however, should be unique. QoS uncontrolled the setting of BE reduction subscriber number. Because the renegotiation. The target subscribers of this number of subscribersdomain real-time parameter are the PS performing QoS This parameter has the same than the as content renegotiationThe setting of this parameter is of subscribers. may be smaller actions,value UlLdrFirstAction. The selected candidate this parameter, for example, the analogous to the setting of BE however, should be unique. service ratenot subscribers selected number. Because do reduction subscriber for downlink LDR the meet the QoS renegotiation conditions, you number of subscribers performing QoS must leave some margin when setting value of renegotiation may be smaller than the this parameter to ensure the successcandidate this parameter, for example,cell toof load the the uplink If the ratio UL load of reshuffling.ofselected for the subscriberslower than this threshold, the UL downlink LDR do not capacity is meetreshuffling function of the cell is stopped. load the QoS renegotiation conditions, you must the basic congestion statesetting cell load After leave some margin when of the this parameter to ensure theno longer of load is released, the system success implements reshuffling. the LDR action. Because the load fluctuates, the difference between the LDR release threshold and trigger threshold should be higher than 10%. The ping-pong effect of the preliminary congestion state may occur. This parameter has the same content as UlLdrFirstAction. The selected actions, however, should be unique. This parameter has the same content as UlLdrFirstAction. The selected actions, however, should be unique. This parameter has the same content as UlLdrFirstAction. The selected actions, however, should be unique. This parameter has the same content as UlLdrFirstAction. The selected actions, however, should be unique. This parameter has the same content as UlLdrFirstAction. The selected actions, however, should be unique. This parameter has the same content as UlLdrFirstAction. The selected actions, however, should be unique. This parameter has the same content as UlLdrFirstAction. The selected actions, however, should be unique.
ADD UCELLLDM(Optional)
ADD UCELLLDR(Optional)
ADD UNODEBLDR(Optional)
ADD UCELLLDR(Optional)
ADD UCELLLDR(Optional)
ADD UNODEBLDR(Optional)
ADD UCELLLDR(Optional)
ADD UNODEBLDR(Optional)
ADD UCELLLDM(Optional)
If the ratio of UL load of the cell to the uplink capacity is not lower than this threshold, the UL load reshuffling function of the cell is triggered. After the basic congestion state of the cell load is released, the system no longer implements the LDR action. Because the load fluctuates, the difference between the LDR release threshold and trigger threshold should be higher than 10%. The ping-pong effect of the preliminary congestion state may occur. This parameter specifies the maximum number of TFCs (Transport Format Combination) allowed in the uplink. The larger the value of this parameter, the larger the number of available TFCs in the uplink. UL measured Smooth filtering coefficient for values. The smooth filtering algorithm is used to avoid random interference in measurement reporting. Smoothness is decided by the filtering coefficient of the measurement. This parameter determines whether the uplink intermediate rate uses automatic or manual mode when using 3-step adjustment. The percentage UL intermediate rate when Threshold of the of the conversational nonAMR service threshold tofor UL rate uplink the 3-step mode is used the 100% adjustment load. It is applicable to is used for1 and algorithm UL and the manual mode speech rate, AMRC To adjust 2. The parameter is used for UL algorithm therate AMR intermediateTFC CONTROL command and adjustment. delivers the non-AMR service admission. controlling the startsis, when a non-AMR service is accessing, That this timer. If no failure message is received when the timer expires, the value of the RNC evaluates the measurement adjustment of UL wideband speechaccessed. If the adjust the the UL AMR AMR speech rate, To uplink load after the service is rate is successful. of athe TFC CONTROL command the UL load is AMRC delivers cellthehigher than this UL percentage of access ofnon AMR R99 a non-AMR Theactivity this timer. If conversational non-is threshold factor of and startsafter the the no failure message conversational service. to the 100%rejected. If AMR service threshold Signals might be speech service, this service will be received when the timer expires, theuplink discontinuously transmitted because of the this load.percentage of other not be higherspeech the UL load of the ULto algorithm thresholds to adjustment of a cellofwideband AMR service The It is applicable will service 1 andthan activation 2. The parameter isadmitted. conversational algorithm uplink load. will services refer threshold, detection Thebe used for to rate100% this service data service. The the source changes of and is successful. thresholds include controlling the non-AMR service admission. The UL load factor other admissions exceptas the ratio of signal the conversational activity factor is non-AMR service is accessing, That is, when conversationalof Conv non_AMR parameters of a defined [UL AMR service,time to channel occupation TheRNC evaluatesthreshold non-AMR service, percentage of the measurement value of transmission handover handover service time. the handover scenarios. It is applicable to the service], [UL and activity factors of the samethreshold] and It admission threshold to access transport Theuplink load after thethe 100%The four the service uplink load. [UL thresholdto algorithm 1 and algorithm 2. is of algorithm 2. The parameter If other services].is accessed. algorithm 1 and different in UL and DL. is applicableof a cell is higher than this channel might be used to limit the proportion the UL load parameters canis used forservice admissions. be used for controlling other The parameter the access controlling the threshold aftera service is accessing, the RNC of a non-AMR between the conversational service,ahandover That is, when handover admission.service will be rejected. If is, when service is speech service, this That a specific cell, uplink user andover toservices in RNC evaluates the other a cell, the value of the and evaluates handing the measurement be higher than this the UL load ofservicewill accessed. If the UL a access priority of the to guarantee the cell of the uplink load after the load after the value is not measurement service will be admitted. threshold, this higher than this threshold after conversational non-AMR service. of a cell is load of a cell is service is accessed. If the UL load Theaccess offactor thresholds include be the UL load a threshold after the access, this higher than this service, this service will parametersthe [UL load of a cellConv non_AMR rejected. If of UL threshold of will not be cell service will be rejected.access threshold]aand service], [UL handover If the UL load of be higher be higher than this threshold, this will notthan this threshold, this service will [UL threshold of other services]. The four admitted. be admitted. service will can be used to limit the proportion parameters factor thresholds include The UL load between theof [UL threshold service, handover parameters conversational of Conv non_AMR user and [UL handover access threshold] and service], other services in a specific cell, and to guarantee the other services]. of the [UL threshold of access priority The four conversational non-AMR to limit the proportion parameters can be used service. between the conversational service, handover user and other services in a specific cell, and to guarantee the access priority of other services.
ADD UNODEBLMTPARA(Optional)
SET UDCCC(Optional)
SET UDCCC(Mandatory)
SET UAMRC(Optional)
SET UAMRCWB(Optional)
SET UADMCTRL(Optional)
ADD UCELLCAC(Optional)
ADD UCELLCAC(Optional)
ADD UCELLCAC(Optional)
ADD UCELLCAC(Optional)
ADD UCELLOLC(Optional)
ADD UCELLOLC(Optional)
ADD UCELLLDM(Optional)
ADD UCELLOLC(Optional)
ADD UCELLLDM(Optional)
ADD UCELLLDR(Optional)
ADD UNODEBLDR(Optional)
ADD UCELLLDR(Optional)
ADD UNODEBLDR(Optional)
the maximum number of uplink OLC fast TF under control. In the actual system, restriction performed in entering/exiting the UlOlcFTFRstrctRabNum and OLC status. DlOlcFTFRstrctRabNum can be set on the After the overload is triggered, the RNC basis of the actual circumstances. If the highimmediately executes OLC by first executing rate TF restriction. The internal counter is set fast subscribers occupy a high proportion, UlOlcFTFRstrctRabNum and incremented by 1 with each execution. If the DlOlcFTFRstrctRabNum tonot exceed the low number of overloads does comparatively OLC values. If the high-rate subscribers occupy a action threshold, the system lowers the BE low proportion, lowering TF to relieve the service rate by set UlOlcFTFRstrctRabNum Length of smoothing filter window of uplink and DlOlcFTFRstrctRabNum to comparatively overload. If OLC.values.the number of overloads exceeds high the OLC action threshold, the previous The higher theno obvious effect the alleviating operation has parameters are, on more users are overload in fast TF restriction under the the involved and the system has to release same conditions, the quicker the cell load users to solve the overload problem. decreases, and the more user QoS is affected. The lower the parameters are, the more likely If the release is load of resultingto the reducing the users areULan extreme method negative User ratio of released, the cell in in uplink capacity the and than this threshold, the UL effect on is lower recovering the system when the cell load system performance. If the overload and congestion congested. overload the parameterscoefficient.andcontrol function of of the the cell is are excessively L3 filteringoverloaded Theof high, the value cell is is released slowly. largerOLC action value the status stopped. Thethe OLC is that an releaseis The mechanism of this parameter, the stronger the smoothing threshold should not be much lower than or performed theeach [OLC period] and in higher effect to the OLC trigger threshold, orsome close and selected the anti-slow-fading rules the services are the lower the signal change based on the action capability, but system state may have a ping-pong effect. The to perform this action. This parameter defines tracing capability. For detailed information of recommendednumber of RABs released in the parameter,difference between the OLC this maximum refer to 3GPP TS 25.433. release threshold and service release. executing uplink OLC the OLC trigger threshold is highersingle10%. It isthe releasing For the users of a than service, desirable to set the two parameters a bit higher given that of RABs means the complete releasing of the the difference between OLC trigger threshold users. The releasing of RABs causes call and OLC release threshold is fixed. drops, so UlOlcFTFRstrctTimes or If the ratio of UL load of the cell to the uplink DlOlcFTFRstrctTimes should be set to a low capacity is notvalues than this threshold, the value. Higher lower of the parameter get the UL load to decrease more obviously, but the cell overload and congestion control function of the cell is triggered. The in a of LDR PS QoS will of users selectedvalueUL the OLC Number be affected. release threshold should not beload handover. domain inter-RAT SHOULDBE much lower than target subscribers of trigger threshold, or The or close to the OLC this parameter are the system state may have a ping-pong effect. the OLC trigger subscribers. In the actual can UL PS domain hysteresis.This parameter The recommended difference between the system, this parameter can becontinually. basis the avoidrelease threshold and theUL LDR PS Number of users selected in a set ontrigger OLC touching off OLC event the high-rate OLC of the actual circumstances. If load handover. domain inter-RAT SHOULDBE is desirable to threshold is occupythan 10%. It subscribers higher a high proportion, set the The target subscribers of bit higher givenare this set the twoto a comparatively parameter Ifthat parameter parameters a low value. the PS domain subscribers. trigger threshold the difference between OLC In the actual high-rate subscribers occupy a set on the basis low proportion, system, this parameter can is UL LDR PS andthe parameterselected inbefixed. high Number release to a comparatively a set OLCof users threshold If the high-rate of the actual circumstances. domain inter-RAT SHOULDNOTBE load value. Because the basic congestion control subscribers occupy a subscribers of this the handover.is designed high proportion, setcell algorithm The target to slowly decreaseIf the parameter to a the PS domain low value. In parameter are comparatively subscribers. load, you subscribers this parameter to a high-rate need to set occupy a low proportion, the actual system, value. in a UL can be this parameter LDR PS comparatively low to a comparatively highset Number of users selected set the basis of the actual circumstances. If the on the parameter SHOULDNOTBE load domain inter-RAT value. Because the basic congestionproportion, control high-rate subscribers subscribers of this handover. The target occupy a high algorithm is designed to slowly decrease cell set the parameter to a domain subscribers. In parameter are to PS comparatively low load, you needtheset this parameter to a a low value. If the high-rate subscribers can be set occupy the actual system, value. comparatively low this parameter proportion, set the parameter to a on the basis of the actual circumstances. If the comparatively high value. Because the basic high-rate subscribers occupy a high proportion, congestion controlto a comparatively low to set the parameter algorithm is designed slowly If the high-rate subscribers occupy a low value. decrease cell load, you need to set this parameter to a the parameter to a value. proportion, set comparatively low comparatively high value. Because the basic congestion control algorithm is designed to slowly decrease cell load, you need to set this parameter to a comparatively low value.
SET UQOSACT(Optional)
SET UQOSACT(Optional)
SET UQOSACT(Optional)
This parameter controls the time lengths for the inter-frequency and inter-RAT measurement based on Qos. After inter-frequency or inter-RAT measurement starts, if no inter-frequency handover is performed when this timer expires, the measurement is stopped, and the Rate adjustment switch of link stability control compressed mode is deactivated, if any. If this for UL QoSis set to 0, this indicates that the parameter of AMR services. When the parameter is be started. UL rate of AMR timer will not set to YES, services can be handover switch of link stability For the inter-frequency or Inter-frequency adjusted. inter-RAT measurement based AMR services. When the control for UL QoS ofon coverage, the compressed mode can be stopped through parameter is set to YES, inter-frequency reporting event 2F. For measurementservices handover can be performed for AMR that is not based on QoS. 2F to ensure the coverage, eventlink is not Inter-RATand the timer must be set but should stability reported, handover switch of control set to 0. for UL QoS of AMR services. When the not be parameterimpactto YES, inter-RAT handover As for the is set on network performance: can be performed for AMRlong time to ensure It reduces the influence of services the QoS. compressed mode to the serving cell. The compressed mode may be stopped ahead of time, which can cause the result that the UE fails to initiate inter-frequency or inter-RAT handover, and thus can lead to call link stability Inter-frequency handover switch of drops. control for UL QoS of VP services. When the parameter is set to YES, inter-frequency handover can be performed for VP services to ensure the QoS. Rate adjustment switch of link stability control for UL QoS of WAMR services. When the parameter is set to YES, UL rate of WAMR services can be handover switch of link stability Inter-frequency adjusted. control for UL QoS of WAMR services. When the parameter is set to YES, inter-frequency handover can be performed for WAMR services tohandover switch of link stability Inter-RAT ensure the QoS. control for UL QoS of WAMR services. When the parameter is set to YES, inter-RAT handover can be performed for WAMR basis. CM implementation approach selection services to ensure the QoS. When the uplink spreading factor is greater than or equal to this parameter value, the SF/2 This parameter determines whether the UL approach will be preferred. Otherwise, one high rate is lowered to the minimum rate in the step layer schedulingBE service set up on DCH in or two steps for will be preferred. The SF/2 approach consumes more system uplink. resources and therefore this approach is This parameteronly for low-rate users. The recommended determines whether the UL rate is raised to the maximum rate in one step high-layer scheduling requires variable or two steps positions of transport channelsin multiplexing for BE service set up on DCH uplink. applicable to a relatively narrow range. and is In addition,factor of SRB.Signals might be UL activity this approach affects the transmission rate of users and thereforethe discontinuously transmitted because of is recommended only when the SF/2 approach is activation detection of conversational service unavailable changes aredata service. The and source or there of high-rate users. activity factor is defined as the ratio of signal transmission time to channel occupation time. The activity factors of the same transport channel might be different in UL and DL.
SET UQOSACT(Optional)
SET UQOSACT(Optional)
SET UQOSACT(Optional)
SET UQOSACT(Optional)
SET UDCCC(Optional)
SET UDCCC(Optional)
SET UADMCTRL(Optional)
SET UFRC(Optional)
SET UADMCTRL(Optional)
UL activity factor of the R99 streaming service. This parameter specifies the E-DCH data Signals might be discontinuously transmitted transfer mode of SRB services. It is of because of the activation detection valid only when SRB services are mapped onto the E-of conversational service and source changes DCH.service. The activity factor is defined as data the ratio of signal transmission time to channel occupation time. The activity factors of the same transport channel might be threshold for This parameter specifies the rate different in UL and DL.use E-DCH to carry UL PS domain decision to streaming services. When the maximum UL service rate is higher than or equal to this threshold, the service will be carried on EDCH. Otherwise, it will be carried on DCH. This parameter specifies the E-DCH data Measurement reporting threshold for triggering transfer mode of event reporting mode is used. event 6A1. The streaming services. It is valid only when streaming services are mapped Event 6A1 is triggered when the measured onto the higher than the absolute threshold value is E-DCH. Measurement reporting threshold for triggering 6A1. This event event reporting QoS operation. event 6A2. The can trigger UL mode is used. This parameter specifies a relative threshold. Event 6A2 is triggered when the measured Absolute threshold of 6A1 = Max threshold value is higher than the absolute Ul Tx Power Relative threshold of 6A1. is received, UL 6A2. When this event report rate of AMR orreporting threshold for triggering Measurement BE services cannot be raised. This parameter specifies a relative threshold. event 6B1. The event reporting mode is used. Absolute threshold of 6A2 = Maxmeasured Event 6B1 is triggered when the Ul Tx Power Relative lower thanof 6A2. value is threshold the absolute threshold 6B1. Measurement reporting threshold for triggering When 6B2.eventevent reporting mode is used. event this The report is received, UL QoS operation is stopped. This parameter specifies Event 6B2 is triggered when the measured a relative threshold.the absolute threshold 6B1 value is lower than Absolute threshold of 6B2. = Max Ul Tx Power - Relative threshold rate of When this event report is received, UL of 6B1. AMR or BE services can be raised. This parameter specifies a relative threshold. Absolute threshold of 6B2 = Max Ul Tx Power Relative threshold of26B2. When the algorithm is used, this parameter defines the total equivalent user numbers corresponding to the 100% uplink load. The parameter should be related to the admission threshold and actual condition of the network. This parameter specifies the step size of the closed-loop power control performed on UL DPCH. For details of this parameter, refer to the 3GPP TS 25.214. Duration when the measured value of VP keeps fulfilling the 6A1 measurement condition before the event 6A1 is triggered. The trigger time is used to prevent the sudden change of the measured value for being value of VP Duration when the measured reported. keeps fulfilling the 6B1 measurement condition before the event 6B1 is triggered. The trigger time is used to prevent the sudden change of the measured value for being reported.
SET UFRCCHLTYPEPARA(Optional)
SET UFRC(Optional)
ADD UTYPRABQUALITYMEAS(Mandatory)
ADD UTYPRABQUALITYMEAS(Mandatory)
ADD UTYPRABQUALITYMEAS(Mandatory)
ADD UTYPRABQUALITYMEAS(Mandatory)
ADD UCELLCAC(Optional)
SET UFRC(Optional)
SET E1T1(Optional)
Whether to support the balanced mode or the unbalanced mode. When this parameter is set to YES, you can set the DIP switches on the interface boards. You do not need to set the Duration when the measured value of VP DIP switches by turning them inwards or keeps fulfilling the 6D measurementboard can outwards. In this case, an interface condition before the event 6DE1_UNBA, E1_BA, or T1 be made to work in is triggered. The trigger time is Whento prevent the suddento NO, you mode. used this parameter is set change of the measured value for being reported. cannot set the DIP switches on the interface boards. You must set the DIP switches by turning them inwards or outwards. In this case, an interface board can be made to work in E1 or T1 mode. Estimated altitude of an uncertain area in the cell center in the WGS-84 coordinates. This is controlled by MTRLGY and valid when MET~0(metric system). the estimated altitude This parameter specifies of an uncertain area in the cell center in the WGS-84 coordinates. This is controlled by MTRLGY and valid when IMP~1(British measurement). Length of the semi-major axis of an uncertain area in the cell center. This is controlled by MTRLGY and valid when MET~0(metric system). the length of the This parameter specifies semi-major axis of an uncertain area in the cell center. This is controlled by MTRLGY and valid when IMP~1(British measurement). Length of the semi-minor axis of an uncertain area in the cell center. This is controlled by MTRLGY and valid when MET~0(metric system). the length of the This parameter specifies semi-minor axis of an uncertain area in the cell center. This is controlled by MTRLGY and valid when IMP~1(British measurement).
ADD USMLCCELL(Optional)
ADD USMLCCELL(Optional)
ADD USMLCCELL(Optional)
ADD USMLCCELL(Optional)
ADD USMLCCELL(Optional)
ADD USMLCCELL(Optional)
ADD UNILNK(Mandatory)
UNI link number This parameter specifies the coefficient of the maximum duration of each counting. The maximum duration is MCCH modification period multiplied by this parameter. Whether to indicate it is the upper level adjacent node when "Is Root Node" is set to No. Upper class transport resource group No. It is valid only when " Is First Class Transport Resource Group " is set to NO.
SET URNCMBMSPARA(Optional)
ADD ADJNODE(Mandatory)
ADD RSCGRP(Mandatory)
ADD IPLOGICPORT(Optional)
Upper number of the logical port A cell can belongs to multiple URAs. This parameter indicates the ID of the first URA that the cell belongs to. The URA is used only by Upper number ofnot known by the CN. When the UTRAN and the logical port the UE is in the URA_PCH state, the This A cell can belongs to multiple URAs. location of the UE is identified byID ofURA. For detailed parameter indicates the the the second URA information about this parameter, refer to only that the cell belongs to. The URA is used 3GPP TS 25.331. not known by the CN. by the UTRAN and When can UE is in themultiple URAs. This A cell the belongs to URA_PCH state, the location of indicates the ID of the third URAFor parameter the UE is identified by the URA. detailed cell belongs about this parameter,only that the information to. The URA is used refer to 3GPP TS 25.331. known by the CN. by the UTRAN and not When can UE is in themultiple URAs. This A cell the belongs to URA_PCH state, the location of indicates the ID of the fourth URA parameter the UE is identified by the URA. For detailed cell belongs about this parameter,only that the information to. The URA is used refer to 3GPP TS 25.331. known by the CN. by the UTRAN and not When can UE is in themultiple URAs. This A cell the belongs to URA_PCH state, the location of indicates the ID of the fifth URA. that parameter the UE is identified by the URA For detailedbelongs to. The URA isparameter, by the cell information about this used only refer to 3GPP TS and not known by the CN. When the UTRAN 25.331. the UE is in the URA_PCH state, the This A cell can belongs to multiple URAs. location of the UE is identified byID ofURA. For URA parameter indicates the the the sixth detailed information about this parameter, refer to only that the cell belongs to. The URA is used 3GPP TS 25.331. not known by the CN. by the UTRAN and When can UE is in themultiple URAs. This A cell the belongs to URA_PCH state, the location of indicates the ID of the seventh URA parameter the UE is identified by the URA. For detailed cell belongs about this parameter,only that the information to. The URA is used refer to 3GPP TS 25.331. known by the CN. by the UTRAN and not When can UE is in themultiple URAs. This A cell the belongs to URA_PCH state, the location of indicates the ID of the eighth URA parameter the UE is identified by the URA. For detailed cell belongs about this parameter,only that the information to. The URA is used refer to 3GPP TS 25.331. known by the CN. by the UTRAN and not When the UE is in the URA_PCH state, the location of the UE is identified by the URA. For detailed information about this parameter, refer to 3GPP TS 25.331. Identity of the UTRAN registration area. The URA is only used by the UTRAN and the CN URA ID. know the URA. The URA consists of does not multiple cells. When the UE enters the URAPCH state, the location of the UE is identified with the URA ID. For details, refer to the 3GPP TS 25.331 protocol.
ADD ATMLOGICPORT(Optional)
ADD UCELLQUICKSETUP(Mandatory)
ADD UCELLQUICKSETUP(Mandatory)
ADD UCELLQUICKSETUP(Mandatory)
ADD UCELLQUICKSETUP(Mandatory)
ADD UCELLQUICKSETUP(Mandatory)
ADD UCELLQUICKSETUP(Mandatory)
ADD UCELLQUICKSETUP(Mandatory)
ADD UCELLQUICKSETUP(Mandatory)
ADD UNRNCURA(Mandatory)
ADD UCELLQUICKSETUP(Mandatory)
reached. signal qualitysystem starts the Tother_RAT used the the the cell at the result Mother_RAT + H/2,frequency quality for delay Threshold When the of indicates of measurement ForsetGSMparameter, younamely, with [InterTothe thistimer and reportsneed3A this when triggering inter-RAT poor, the to consider of CS domain services, if the value of triggering RSSI; current frequency is measurement event frequency measure thetheEc/No for PS domain the following indicates of inter-RATset to you timer expires. Tother_RAT factors: specified is handover measurement quantity parameter is under report mode] threshold, EVENT_TRIGGER, this parameter is used to When thethatservices. mode is adopted for the In which,threshold; decision non-HSDPA the current can infer event report frequency cannot set the measurement (CIO)requirements ofOne intra-frequencyOffset estimated quality of the QUsed represents thecontrolservices, 2B. the Cell PS domain measurement, only when the For Individual non-HSDPA of event when meet the coverage related indicates the offset of the necessarycell; event 2F indicates only for quality of the currently used frequency that currentis used as conditions can be quantity of the inter-RAT the measurement metmeets Ec/No services; current UTRAN; the Threshold of used the quality frequency for the quality for when the quality offrequency Hysteresisof -lower the following condition QUsed <=value is Tused represents the the threshold can H represents quality ofused the restored, inter-RAT measurement and the frequencythe hysteresis.cell is TUsedwith triggering inter-frequencycurrently be in the thanthus thresholdthatof caused bysettriggered this this parameter the targetused (Event EVENT_TRIGGER, H3a/2 and report mode] ismeasurement the decisions 2B can frequency quality is usually signal current frequency reduce wrong [Inter-RAT and lower measurement quantity of RSCP for CIOdomain onlyparameter is used to set ofmet.)CS >= is meetssystem; conditions are event GSMwhen condition Mother_RAT + 2F, or jitters. the both this than the triggering threshold measurement services. signaleven if the the cell at the delay After handover, qualitythe measurement result Tother_RAT indicates systemevent 2D. Mother_RAT +the threshold inter-frequency When the UTRAN the of of Areas (URAs) control on to H/2, 3A. 3A set equallythe eventRegistrationstarts the Numberdomain services,The event is ofis of For CS frequency is reportsthe value verywhen measurement isand qualityagain, it this [Intertriggering when triggered of the currently of the GSM RSSI; current timer the poor,ifnamely, event triggered, cell belongs to. parameter For combined services, the the 3A which the hand overreport mode] is set tocell of frequency is indicates UE again to the difficult toexpires. thethe inter-RAT handover the timer measure CSspecified services is you Tother_RAT frequency parameter used UTRAN for the the is below this threshold configuration under this domain threshold, to EVENT_TRIGGER, parameter cannot currently when frequency.frequency is used In which,threshold;domainThat is, this decision can infer used CS and the that the current services are handover decision adopted[Inter-RAT PScontrol of event 2B. THD] set the measurementset lower than the start parameter is usually (CIO)requirements ofOne QUsed represents the Cell Individual Offset estimated quality of the offset meet the the is reached. included. coverage related indicates theonly of the necessarycell; event 2F indicates that threshold for event 2F you need be consider currentthisimpact conditions canto the threshold UTRAN; on or equal to met of the inter-RAT the network performance, current services; To set the of used parameter, As for the quality offrequency frequency is lower Threshold quality for when representshysteresis. Hysteresisfor the the of represents factors: ofusedcell is restored, Tused H event 2D. parameter, the easier the the frequencythe the quality threshold can following quality thethe used larger the This parameter configures2B can befrequency triggering inter-frequencycurrently used thanthus thresholdthat is ismeasurement with this this decisions usually settriggered (Event current wrongparameter causedadoptedin the frequency 3A. When is by signal the reduce and the event report of Ec/No for PS domain lower When for triggering of event measurement quantity mode the frequency measurement quantity to trigger the inter-RAT only when both conditions are met.) 2F, or is GSMthe triggering thresholdUE, thewhen the jitters. is acceptable than system; for the for the of only handover intra-frequency quality services.measurement, of Qos-based measurement even purpose event HSPA the signal After handover, qualitythe the event 2D. result the inter-frequency Mother_RAT indicates usedofparameter theset When of thethe valueifof thisfrequency meets cell set equallyservices, if the is valid at the quality mayHSPA Theis triggered value ofwhen is handover. if currently of again, it [Interparameter measurement For occur to the threshold measurement services, the parameter of the reporting mode is selected for inter-RAT. GSM RSSI; current frequency is poor, namely,TUsed For following condition QUsed <= is very the combined excessively high. report mode] isthis tocell of event to hand over the UE again to the frequency measure thethe inter-RATset difficult Tother_RAT for the ratio target frequency handover parameter is under CSspecified threshold, you configurationindicates of domain services is to H3a/2 and the quality parameter is used Ec/No: signal-to-noise the EVENT_TRIGGER, this currently threshold;domainThat is, this decision when frequency.frequency are >= can infer that thesignal code power cannot current services adopted used CS Mother_RAT + CIO One meets the condition control of event 2B. RSCP: received set the measurementset lower than the start parameter is usually (CIO)requirements of the Cell Individual Offset system starts the offset meet the included. coverage related indicates the delay Tother_RAT + H/2, the CPICH_Ec/NO: the2F or equal to the threshold of the necessarycell; event 2F indicates only conditions can be met that threshold for event measurement quantity of thefor event 2Don network performance, current services; thereportswith unitevent when As for the quality ofand 2F, the 3A of dB lower triggering timer used inter-RATandthe used frequency is Threshold of the quality for when the impact hysteresis.cell is restored, of represents used frequency Hysteresis can event 2D. parameter, the easier the H largerexpires. measurement quantity the frequency quality of the the timer inter-frequency 2B can be triggered CPICH_RSCP: the triggeringthreshold (Event measurement with thanthus this parameter caused byset lower this the decisions is usually signal reduce wrong 2D 3A. and for event quantity 2F, with unit of domain triggering of event and When thefor PSdBm In which, both conditions are met.) usedwhen measurement of RSCP frequency only the triggering threshold of event 2F, or is jitters. is acceptable for the UE, the handover than RNC, in the coverage-based inter-RAT quality services. even ifestimated quality of the QUsed represents the the inter-frequency The HSPA the signal After handover, quality of the event 2D. When UTRAN; value of this parameter is set set equally if the threshold of cell at the mayHSPA services, configure that thevery current measurement,is triggered value of [Intermay For occur to the is if the again, it this measurement services, the parameterinteris currentrepresents the qualityare delivered the For combined excessively high. quantity again to the cell of Tused frequency poor, mode] is RAT measurement report namely, set for frequency measure the UE threshold to difficult to hand over CSspecified services is you the domain threshold, parameter to under 2D that triggersused configurationeventthat is parameter the in the current frequency according is for the EVENT_TRIGGER, this currently this used to currently when frequency.frequency is can infer that the current services are cannot adopted used CS domainThat is,result that the GSM system;usually set lower than the start measurement, which control of event 2B. One set the measurement causes the parameter is meet the coverage related measurement of the included. inter-RAT measurementmet only Mother_RAT event 2F or equal to the threshold indicates the requirements result Qos-based cannot of the necessary the event 2F indicates that threshold for current services; conditions can be Astheto the coverage-based configurations. for the impact of event 2D.RSSI;on network performance, refer the quality of the used frequency is lower when GSM quality of the cell is restored, of larger the parameter, the easier the the frequency Tother_RAT indicates is inter-RAT handover Under this condition, it thenecessary for the thanthus threshold (Event 2B can be triggered and this threshold; parameter is the frequency triggeringthisevent 3A.measurement tolower decision Qos-basedboth conditions usually set set the only whenofinter-RAT When ofmet.) 2F, or is are event than Individual Offset for the indicateshandover quality istriggering thresholdWhen both the Cell the acceptable (CIO) inter-frequency the used frequency separately. UE, the for After handover, even if the ofquality 2D. offset Threshold if usedthreshold parameter is set frequency set equallyof the the coverage-based inter-RAT may occur to thetriggered again, it is very of the inter-RAT value of this event cell; Qos-based and measurement is triggering inter-frequency measurement with For combinedthe hysteresis.parameter can excessively high. H represents services, UE Hysteresis measurements exist,thethetoagain to the cell of refer this parameter. difficult to hand over CS domain for PS domain measurement decisions caused by signal is configuration for the network performance: reduce wrong quantity of Ec/No services As for theused frequency. That is, this impact on currently when CS domain services are non-HSPA services. adopted UE moves to the cell border, and jitters. When the parameter is usually set lower than thethe For PS domain non-HSPA the cell at if start services, included. intra-frequency neighboring cell in Whenis a for event 2F or equal to thethe the signal there of [Inter-frequency measure report threshold impactquality of threshold value frequencyon network performance, As for the direction,poor, namely, this current 2D. is CPCICH Ec/No varies the moving of event set to EVENT_TRIGGER, this mode] is is parameter, the larger theunder thethethe easier the current parameter RSCP faster than is used and specified threshold, you quality of the parameterof event to set frequency cannot triggeringthat the current the measurement 3A. When the frequency can infer cell should be evaluated according to CPCICH control is acceptableOnethe the necessary the of quality When there related requirements of meet the event 2B. no of UE, the handover Ec/No. coverage isfor intra-frequency conditions can bethe event 2F indicates that of the quality may occur if cell inmet of this parameter is set current services;value only whenCPCICH neighboring the the lower than this threshold direction, the used frequency isof excessively high. thanthe cell and the quality the frequencyfaster RSCP varies quality Ec/No is restored, (Event 2B can be triggeredusually set lower and thus this parameter is only when both should be evaluated according to CPCICH conditions are met.) than the the measurement quantity is not RSCP. Iftriggering threshold of event 2F, or is After handover, even if the inter-frequency set equally to the the handover may not properly selected,threshold of event 2D. be measurement is triggered again, it is very For combined services,resulting in call drops. performedhand over thethe parameter cell of difficult to timely, thus domain services is configuration for the CS UE again to the currently when frequency. That is, this adopted used CS domain services are parameter is usually set lower than the start included. threshold for event 2F or equal to the threshold As for the impact on network performance, of event 2D. parameter, the easier the the larger the triggering of event 3A. When the frequency quality is acceptable for the UE, the handover may occur if the value of this parameter is set excessively high.
conditions can bethe event 2F indicates that of current services; met only when the quality the used frequency isof the cell isthis threshold the frequency quality lower than restored, (Event 2B can be triggeredusually set lower and thus this parameter is only when both conditions are met.) than the triggering threshold of event 2F, or is After handover, even if the inter-frequency set equally to the threshold of event 2D. measurement is triggered again, it is very For combined services, the parameter difficult to hand over CS domain services cell of configuration for the the UE again to the is currently when frequency. That is, this adopted used CS domain services are parameter is usually set lower than the start included. threshold for event 2F or equal to the threshold As for the impact on network performance, of event 2D. parameter, the easier the the larger the triggering of event 3A. When the frequency quality is acceptable for the UE, the handover may occur if thespecifies this parameter is set This parameter value of whether the Mac-ehs excessively high.Mac-ehs is enhanced Mac-hs entity is applied. and is used for DL L2 enhancement function. If the DL L2 enhancement is configured, the Mac-ehs entity will be applied, otherwise the Mac-ehs entity will not be applied.
SET UHSSCCHLESSOPPARA(Mandatory)
ADD UNODEBESN(Optional)
ADD UCELLHCS(Optional)
ADD UCELLMBDRINTERRAT(Optional)
Whether NodeB used the electronic serial number 2 The ratio of the users which could launch the handover to inter-RAT neighbour cell. When the parameter is ALL_USER, it means This parameter indicates whether HCS is all of the users could be handover to the interused. RAT neighbour cell. When the parameter is HALF, it means only 1/2 of the users could be handover to the inter-RAT neighbour cell. Indicating parameter is THIRD, itFor details, When the whether HCS is used. means only refer to 3GPP TS 25.304.handover to the inter1/3 of the users could be RAT neighbour cell. When the parameter is QUARTER, it means only 1/4 of the users could be handover to the inter-RAT neighbour cell.
SET UUSERPLNSHAREPARA(Optional)
Percentage of User Plane Sharing Out Offset This parameter specifies the user priority which is defined according to the Percentage of User Plane Priority) from the ARP(Allocation/Retention Sharing Out threshold RAB assignment. The user classes in descending order of priority are Gold, Silver, This parameter specifies the user priority and thendefined according to the the SET which is Copper. Please refer to UUSERPRIORITY MML commandfrom the ARP(Allocation/Retention Priority) to see how the user priority is The user classes in RAB assignment. defined. descending order of priority are Gold, Silver, This parameter specifies the user priority and thendefined according to the the SET which is Copper. Please refer to UUSERPRIORITY MML commandfrom the ARP(Allocation/Retention Priority) to see how the user priority is The user classes in RAB assignment. defined. descending order of priority are Gold, Silver, and then Copper. Please refer to the SET UUSERPRIORITY MML command to see how the user priority is defined.
SET UUSERPLNSHAREPARA(Optional)
SET USCHEDULEPRIOMAP(Mandatory)
SET UUSERGBR(Mandatory)
SET UFACHBANDWIDTH(Mandatory)
SET UUSERHAPPYBR(Mandatory)
This parameter specifies the user priority which is defined according to the ARP(Allocation/Retention Priority) from the RAB assignment. The user classes in descending order of priority are Gold, Silver, and then Copper. Please refer to the SET UUSERPRIORITY MML command to see how the user priority is defined.
ADD ATMTRF(Optional)
Rate unit
ADD AAL2PATH(Mandatory)
VCI of the AAL2 path out BSC6900 If the parameter is set to Disable, the added IP path is not configured with the VLAN ID. If the parameter is set to Enable, the added IP path is configured with the VLAN ID.
ADD IPPATH(Optional)
ADD UNODEBIP(Optional)
ADD SCTPLNK(Optional)
ADD ETHMA(Mandatory)
ADD SCTPLNK(Mandatory)
ADD SCTPLNK(Mandatory)
VLAN priority
ADD TRMFACTOR(Optional)
ADD TRMMAP(Optional)
AMR voice service bearer primary path AMR voice primary path load threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the AMR voice service.
ADD LOADEQ(Optional)
ADD TRMMAP(Optional)
AMR voice service bearer secondary path AMR voice primary secondary path load ratio threshold. It is one condition for selecting the primary path or secondary path in the case of This parameter specifies the channel type of the establishment of the AMR voice service. VoIP services. - DCH: Both uplink and downlink are preferably carried on DCH. - HSDPA: Uplink is preferably carried on DCH, WCDMA AMR voice service uplinkon HSand downlink is preferably carried factor DSCH. - HSPA: Uplink is preferably carried on E-DCH, and downlink is preferably carried on HSDSCH.
ADD LOADEQ(Optional)
ADD TRMFACTOR(Optional)
SET UFRCCHLTYPEPARA(Optional)
SET UFRC(Optional)
ADD EMU(Optional)
ADD EMU(Optional)
ADD EMU(Optional)
ADD EMU(Optional)
ADD EMU(Optional)
ADD EMU(Optional)
ADD VPCLCX(Optional)
ADD AAL2PATH(Mandatory)
VPI of the AAL2 path out BSC6900 Meaning: Indicates whether the videophone (VP) switch defines whether a video phone is This service is limited in a cell. When the indicator is "TRUE", video phone is allowed in a barred in a cell. If a it indicates that the VP service is limited in the as a military exclusive confidential zone such cell. zone, the phone can be used for shoot in the confidential zone. Therefore, the operator can reject video phone servicesto YES, theby When the parameter is set in the cell QOS enabling the switch.used for VP services. control algorithm is When the parameter is set to NO, the QOS control algorithm is not used for VP services.The VP call drop of VPper CPUSonly Threshold of QOS action ratio services to includes inter frequency handover. report KPI alarm.In a checking period, if the ratio is higher than this threshold and the number of VP number of VP RAB establish The minimum call release is higher than the related threshold, the report KPI alarm.calladrop request per CPUS to KPI alarm of VP In ratio is reported. the number of VP RAB checking period,if establish request is higher than the threshold and the VP RAB setup successful ratio is lower than this threshold,thesetup successful ratio Threshold of VP RAB KPI alarm of VP RAB setup ratio to report KPI alarm. In a checking per CPUS is reported. period,if the ratio is lower than this threshold and the number of VP RAB establish request is higher than the related VP call release per The minimum number of threshold,the KPI alarm of VP RAB setup ratio is checking CPUS to report KPI alarm.In a reported. period, if the number of VP call release is higher than the related threshold and the VP call drop ratio is higher than this threshold, the KPI alarm of VP call drop ratio is reported.
ADD UEXT3GCELL(Optional)
SET UQOSACT(Optional)
SET UKPIALMTHD(Optional)
SET UKPIALMTHD(Optional)
SET UKPIALMTHD(Optional)
SET UKPIALMTHD(Optional)
SET UQOSACT(Optional)
ADD EMU(Optional)
ADD OP(Optional)
command is delivered.threshold WAMR rate the higher the relative The UL is under the adjust conditions. When Weight mode to 0, the same timer starts when AMRC is set adjustment procedure is triggered, and stops SHO relative for computing frequency general Weight used threshold depends on only the when theof the measurement report is received. best cell next active set. For the definition, quality. If no measurement report is received when the referlarger the TS 25.331. parameter, the to 3GPP value of this TheAMRC timer expires, you can infer that the UL When the parameter equals 0, the general higher the value remains in the sameof the as calculated general quality measuredthe active set is the measurement of qualityset. When this parameter is setstate the active of the previous UL AMRC mode0, to thatbest cell and the SHO relative threshold the before general quality of the active set the quality of adjustment. The previous cell in ismode AMRCthe active set. dependscell only the best set. For details about the best on in the active adjustment is not effective, anditanother When the parameter to the subsection of this parameter, refer equals 1, can be adjustment is required. regarded as the equivalent signal strength of frequency quality estimation in the section when maximummeasurement in 3GPP TS inter-frequency ratio combination of down links of all cells in the active set for all event25.331. This parameter is used is implemented. triggered inter-frequency measurements, As for sensor alarm switch performance: Water thethose triggered by events 2D, 2F, 2B including impact on network The 2C. The parameter, however, is not used and larger the value of the parameter is, the Weightthresholds for triggering events general higher used for computing frequency 1A and for periodical inter-frequency weekday of the Whether to limit the operationmeasurements. quality. 1B are obtained under the same condition, and The larger the value of this parameter, the operator. difficult it is of this parameter, the the weekday needs to join The larger the value for the the more Ifestimated quality cellto be limited, higher the estimated generalof the current see the descriptioneasier it is quality of the higher the and the of active set, in the same"Week".for the cell to frequency condition, and the more current frequency in The smaller the value of leave the active set. the same condition, and difficult todifficult inter-frequency handover. trigger the triggering of the inter-RAT the more is for the cell Theparameter is, the easier itparameter, theto smaller the value of smaller the value handover; Reversely, thethis join the active set, and the more difficult it isof for lower the estimatedlower the estimated quality of this parameter, the active set.the current the cell to leavethe easier to trigger interthe frequency, and of the current frequency, and general quality frequency handover. Generally, this parameter the easier the triggering of the inter-RAT is set to 0 or 1. Whether the handover theeasy handover. When the value is set to 0, is or difficult to trigger isactive set is the quality of general quality of an not decided by the way of setting this parameter. parameter is used the best cell in the set. This for event 3A evaluation. To set this parameter,active/standby port for Whether to trigger an refer to the method setting the intra-frequency handover weighting switchover. If this parameter is set to YES, an factor "Weight". active/standby port switchover is triggered when a fault is detected on the active port. If this parameter is set to NO, an active/standby port switchover is not triggered when a fault is detected on the active port. Working mode. E1: The E1 system is recommended by the IUT-T. E1 carries signals Receiving window size. It controls the transmit at 2.048 Mbit/s. G.703 defines the electrical speed of the peer. specification and G.704 defines the frame format for E1 telecommunication lines. The E1 system is used in Europe and China. T1: The T1 system is recommended by the You can select multiple weekdays. America. ANSI and widely used in the North T1 carries signals at 1.544 Mbit/s. E1_BA: mode of the M3UA link set, to WorkingA circuit that uses two wires including transmit the and M3UA_IPSP. For details M3UA_ASP same but contra-directional signals. The 120-ohm E1 line and RFC4666. about the ASP and IPSP, see the 100-ohm T1 line are typical balanced circuits. The balanced circuit must use the balanced cable, that is, twisted-pair cable consisting of two wires. E1_UNBA: A circuit that uses one transmission flag of cable andarea to be formatted. signal the work one common grounding cable to transmit signals. The 75-ohm E1 line is a typical unbalanced circuit. The unbalanced circuit must use the unbalanced cable, that is, coaxial cable.
STR IPCHK(Optional)
ADD SAALLNK(Optional)
ADD OP(Mandatory)
ADD M3LKS(Optional)
FMT DATA(Optional)
SET E1T1(Optional)
SET OPT(Optional)
Optical interface type. Value UNI indicates that the interface is a user network interface. Value NNI indicates that the interface is a networknetwork interface. Generally, this parameter is set to UNI. This parameter is set to NNI when the BSC is connected to the core network. This parameter specifies the X offset for connected mode. For a PTM service in a cell, Wait tothat receive this service need to retain X UEs restore time in connected mode, so as to reduce triggering of counting on the Uu interface during recounting.between CPUX = "NCountingThd" + Difference The value of usage of the current " XOffset". XPUs. If the difference between and target CPU usage of the current and target XPUs is greater than the value of this parameter, load sharing is triggered between the current and target XPUs. For the PS BE service at a rate of 0 kbit/s, this parameter is used for the rate upsizing for Load sharing threshold of 4A. Unsuccessful DCCC triggered by event the current XPU. When the CPU usage of anthe resources are rate upsizing indicates that XPU exceeds the threshold, load sharing is configurable. run at a insufficient in the cell. The service may rate of 0 kbit/s for a long time. If the timer is started, the 0 kbit/s service of the UE is released after the timer expires. If the length is set to 0, the timer is not started.
SET MSP(Optional)
SET URNCMBMSPARA(Optional)
SET FCCPUTHD(Optional)
SET FCCPUTHD(Optional)
SET UCOIFTIMER(Optional)
SET TZ(Optional)
Time zone
Paging UE in Idle, CELL_PCH, Feature Name GUI Value Range Actual Value Range Unit URA_PCH State Value Type (Type 1) Paging UE in CELL_FACH, CELL_DCH State (Type 2) Interval Type 0~2 0~2 None Dynamic AAL2 Connections in Iub/IuCS/Iur Enumeration Interface Type R99(R99), HSPA(HSPA), SHARE(SHARE)
WRFD05030104
None
WRFD040202
Compound Type
00:00:00~23:59:5 9 s
WRFD021103
Enumeration Type
ASC0, ASC1, ASC0, ASC1, ASC2, ASC2, ASC3, ASC3, ASC4, ASC5, ASC4, ASC5, ASC6, ASC7 ASC6, ASC7 ASC0, ASC1, ASC0, ASC1, ASC2, ASC2, ASC3, ASC3, ASC4, ASC5, ASC4, ASC5, ASC6, ASC7 ASC6, ASC7 ASC0, ASC1, ASC0, ASC1, ASC2, ASC2, ASC3, ASC3, ASC4, ASC5, ASC4, ASC5, ASC6, ASC7 ASC6, ASC7 ASC0, ASC1, ASC0, ASC1, ASC2, ASC2, ASC3, ASC3, ASC4, ASC5, ASC4, ASC5, ASC6, ASC7 ASC6, ASC7 ASC0, ASC1, ASC0, ASC1, ASC2, ASC2, ASC3, ASC3, ASC4, ASC5, ASC4, ASC5, ASC6, ASC7 ASC6, ASC7 ASC0, ASC1, ASC0, ASC1, ASC2, ASC2, ASC3, ASC3, ASC4, ASC5, ASC4, ASC5, ASC6, ASC7 ASC6, ASC7 ASC0, ASC1, ASC0, ASC1, ASC2, ASC2, ASC3, ASC3, ASC4, ASC5, ASC4, ASC5, ASC6, ASC7 ASC6, ASC7 ASC0, ASC1, ASC0, ASC1, ASC2, ASC2, ASC3, ASC3, ASC4, ASC5, ASC4, ASC5, ASC6, ASC7 ASC6, ASC7
None
WRFD021103
Enumeration Type
None
WRFD021103
Enumeration Type
None
WRFD021103
Enumeration Type
None
WRFD021103
Enumeration Type
None
WRFD021103
Enumeration Type
None
WRFD021103
Enumeration Type
None
WRFD010401
Enumeration Type
None
WRFD040100
Flow Control
30~100
per cent
WRFD040100
Flow Control
30~100
per cent
None
None
Enumeration Type
Disable(Disable), Enable(Enable)
Disable, Enable
None
WRFD021103
10~360000, step:10 AC0, AC1, AC2, 0.01~360, step: AC3, AC4, AC5, 0.01 AC7, AC8, AC6, AC9, AC10, AC11, AC12, AC0, AC1, AC2, AC13, AC14, AC3, AC4, AC5, AC15AC7, AC8, AC6, AC9, AC10, AC11, AC12, AC0, AC1, AC2, AC13, AC14, AC3, AC4, AC5, AC15AC7, AC8, AC6, AC9, AC10, AC11, AC12, AC13, AC14, AC15
ms
WRFD020114
WRFD020114
Domain Specific Access Control (DSAC) Interval Type 1~36000 AC2, AC3, AC0, AC1, AC4, AC5, AC6, AC7, Domain Specific AC8, AC9, AC10, Access Control AC11, AC12, AC13, (DSAC) Bit Field Type AC14, AC15 AC0, AC1, AC2, AC3, Domain Specific Access Control (DSAC) Bit Field Type AC4, AC5, AC6, AC7, AC8, AC9, AC10, AC11, AC12, AC13, AC14, AC15 AC0, AC1, AC2, AC3,
None
WRFD020114
None
WRFD020114
AC4, AC5, AC6, AC7, Domain Specific AC8, AC9, AC10, Access Control AC11, AC12, AC13, (DSAC) Bit Field Type AC14, AC15 Domain Specific Access Control (DSAC) Interval Type 6~3600
None
WRFD020114
6~3600
WRFD021103
6~3600
WRFD020114
6~3600
WRFD021103
0.1~1, step:0.1
per cent
WRFD021103
Enumeration Type
OFF, ON
OFF, ON
None
WRFD040100
Flow Control
30~100
per cent
WRFD040100
Flow Control
30~100
per cent
WRFD040100
Flow Control
Enumeration Type
WRFD020101
Admission Control
Enumeration Type
None
None
WRFD020803
Enumeration Type
INACTIVE, ACTIVE
INACTIVE, ACTIVE
None
WRFD020803
Enumeration Type
None
WRFD020803
Enumeration Type
RNC(Local RNC), NODEB(NodeB in Local RNC), Interval Type 0~65534 NRNC_RNC(Neighbo ring RNC), NRNC_NODEB(Node Enumeration B in Neighboring Type RNC)
None
None
WRFD020501
-22~5
dB
WRFD022000
0~1
None
65334~65383
None
1~65535
None
1~65535
None
1~65535
None
1~65535
None
Enumeration Type
ALL(All), ONEBYONE(One by One) ALL, ONEBYONE None BIT_ALIGN(Bit aligned mode), OCTET_ALIGN(Octet BIT_ALIGN, aligned mode) OCTET_ALIGN
WRFD010687
None
WRFD050406
0~4000000
kbit/s
WRFD01061001
Enumeration Type
Enumeration Type
None
-1000~10000
-3281~32810
feet
Critical, Major, Minor, Critical, Major, Bit Field Type Warning Minor, Warning
None
Enumeration Type
None
WRFD020302
Inter Frequency Hard Handover Based on Coverage Interval Type 0~63 HCS (Hierarchical Cell Structure) Inter-RAT Handover Inter-RAT Based on Handover Coverage Based on
None
WRFD021200
None
None
Service Inter-RAT Handover Based on Load Interval Type 0~63 3.4/6.8/13.6/27. 2 kbit/s RRC Connection and RAB Enumeration Assignment Type AMR/WB-AMR Speech Rates Enumeration Control 3.4/6.8/13.6/27. Type SENDER_PARA, RECEIVE_PARA, FLOWCONTROL_PA RA
None
WRFD010510
WRFD020701
NO, YES
NO, YES
None
WRFD010510
2 kbit/s RRC Connection and RAB Assignment 3.4/6.8/13.6/27. Interval Type 0~100 2 kbit/s RRC Connection and RAB Assignment 3.4/6.8/13.6/27. Interval Type 0~65534 2 kbit/s RRC Connection and RAB Assignment 3.4/6.8/13.6/27. Interval Type 0~100 2 kbit/s RRC Connection and RAB Assignment Interval Type 0~65534 AMR/WB-AMR Speech Rates Control Interval Type 20~64000
0~100
per cent
WRFD010510
0~65534
None
WRFD010510
0~100
per cent
WRFD010510
0~65534
None
WRFD020701
20~64000
ms
WRFD05030104
0~4599
None
None
None
0~4599
None
None
None
0~4599
None
None
None
0~4599
None
String Type
None
WRFD020801
Cell ID + RTT Function Based LCS Interval Type -32767~32767 Cell ID + RTT Function Based LCS Interval Type -107502~107502
-32767~32767
WRFD020801
-107502~107502 m
WRFD020801
Cell ID + RTT Function Based -90~90, step: LCS Interval Type -90000000~90000000 0.000001 Cell ID + RTT Function Based LCS String Type
degree
WRFD020801
None
-90~90
second
WRFD020801
Cell ID + RTT Function Based 180000000~1800000 -180~180, step: LCS Interval Type 00 0.000001 Cell ID + RTT Function Based LCS String Type
degree
WRFD020801
None
-180~180
second
WRFD020801
degree
WRFD020801
degree
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None
WRFD020605
Enumeration Type
TRUE, FALSE
TRUE, FALSE
None
WRFD050409
IP Transmission Introduction on Enumeration Iu Interface 3.4/6.8/13.6/27. Type 2 kbit/s RRC Connection and RAB Enumeration Assignment Type
NBAP(NBAP), APPLIED_ON_UP M3UA(M3UA) None APPLIED_ON_UPLIN NBAP, M3UA LINK, K, APPLIED_ON_DOW NLINK, APPLIED_ON_BOTH PRIMARY(Primary Area), STANDBY(Standby Area), ALL(Primary and Standby Area) APPLIED_ON_DO WNLINK, APPLIED_ON_BO TH None
WRFD010510
BSC/RNC Software MRFD-210401 Management BSC/RNC Software MRFD-210401 Management Traffic Priority Mapping on Transport Traffic Priority Mapping on Transport Traffic Priority Mapping on Transport Traffic Priority Mapping on Transport Traffic Priority Mapping on Transport
Enumeration Type
None
Enumeration Type
PRIMARY(Primary), STANDBY(Standby)
PRIMARY, STANDBY
None
WRFD050424
Enumeration Type
None
WRFD050424
Enumeration Type
None
WRFD050424
Enumeration Type
None
WRFD050424
Enumeration Type
None
WRFD050424
Enumeration Type
None
WRFD050424
Traffic Priority Mapping on Transport Traffic Priority Mapping on Transport Traffic Priority Mapping on Transport Traffic Priority Mapping on Transport Traffic Priority Mapping on Transport Traffic Priority Mapping on Transport Traffic Priority Mapping on Transport Traffic Priority Mapping on Transport Traffic Priority Mapping on Transport IP Re-route Based on BFD/ARP IP Re-route Based on BFD/ARP
Enumeration Type
None
WRFD050424
Enumeration Type
None
WRFD050424
Enumeration Type
None
WRFD050424
Enumeration Type
None
WRFD050424
Enumeration Type
None
WRFD050424
Enumeration Type
None
WRFD050424
Enumeration Type
None
WRFD050424
Enumeration Type
None
WRFD050424
Enumeration Type
None
WRFD050421
3~10
None
WRFD050421
3~10 env, sig, power, power, env, sig, trunk, trunk, hardware, hardware, software, software, run, run, comm, service, comm, service, Bit Field Type handle handle
ms
None
Enumeration Type
System), hardware(Hardware System), software(Software System), run(Running System), comm(Communicatio n System), service(QoS), handle(Processing Error)
power, env, sig, trunk, hardware, software, run, comm, service, handle
None
WRFD031101
DHCP
0~5, 8~27
None
WRFD031101
DHCP
0~11
None
WRFD010101
3GPP Specifications
Enumeration Type
NOT_ALLOWED, ALLOWED
None
None
1~65535
min
None
None
1~60
min
Enumeration Type
NONE, PEER
None
None
None
Enumeration Type
None
None
Enumeration Type
None
None
String Type
None
1~63 characters
None
None
None
String Type
None
1~63 characters
None
None
None
String Type
None
1~15 characters
None
None
None
String Type
1~15 characters
None
None
None
Enumeration Type
None
None
None
Enumeration Type
None
None
None
Enumeration Type
ENABLE, DISABLE
ENABLE, DISABLE
None
Enumeration Type
OFF(Off), ON(On)
OFF, ON
None
1~65535
min
None
None System Information Broadcasting System Information Broadcasting System Information Broadcasting Iu Flex Load Distribution Management
Enumeration Type
None
WRFD010401
0~15
None
WRFD010401
0~15
None
WRFD010401
0~15
None
WRFD021306
0~65535000 step:1000
None
Enumeration Type
LOW(LOW), HIGH(HIGH)
LOW, HIGH
None
None
None
Enumeration Type
None
None
Enumeration Type
None
None
Enumeration Type
None
None
Enumeration Type
:1E-4, :1E-8, O1E7_R1E8(OCCUR RECOVERY:1E-5), RECOVERY:1E-9), :1E-7, O1E5_R1E6(OCCUR O1E9_R1E10(OCCU RECOVERY:1E-8), :1E-5, R:1E-9, O1E4_R1E5(OCCUR O1E8_R1E9(OCCUR RECOVERY:1E-6), RECOVERY:1E-10), :1E-4, :1E-8, O1E6_R1E7(OCCUR O1E10_R1E11(OCC RECOVERY:1E-5), RECOVERY:1E-9), :1E-6, UR:1E-10, O1E5_R1E6(OCCUR O1E9_R1E10(OCCU RECOVERY:1E-7), RECOVERY:1E-11), :1E-5, R:1E-9, O1E7_R1E8(OCCUR O1E11_R1E12(OCC RECOVERY:1E-6), RECOVERY:1E-10), :1E-7, UR:1E-11, O1E6_R1E7(OCCUR O1E10_R1E11(OCC RECOVERY:1E-8), RECOVERY:1E-12) :1E-6, UR:1E-10, O1E8_R1E9(OCCUR RECOVERY:1E-7), RECOVERY:1E-11), :1E-8, O1E7_R1E8(OCCUR O1E11_R1E12(OCC RECOVERY:1E-9), :1E-7, UR:1E-11, O1E9_R1E10(OCCU RECOVERY:1E-8), RECOVERY:1E-12) R:1E-9, O1E8_R1E9(OCCUR RECOVERY:1E-10), :1E-8, O1E10_R1E11(OCC RECOVERY:1E-9), UR:1E-10, O1E9_R1E10(OCCU RECOVERY:1E-11) R:1E-9, RECOVERY:1E-10), O1E10_R1E11(OCC UR:1E-10, RECOVERY:1E-11)
O1E3_R1E4, O1E4_R1E5, O1E5_R1E6, O1E6_R1E7, O1E7_R1E8, O1E3_R1E4, O1E8_R1E9, O1E4_R1E5, O1E9_R1E10, O1E5_R1E6, O1E10_R1E11, O1E6_R1E7, O1E11_R1E12 O1E7_R1E8, O1E8_R1E9, O1E9_R1E10, O1E4_R1E5, O1E10_R1E11, O1E5_R1E6, O1E11_R1E12 O1E6_R1E7, O1E7_R1E8, O1E8_R1E9, O1E4_R1E5, O1E9_R1E10, O1E5_R1E6, O1E10_R1E11 O1E6_R1E7, O1E7_R1E8, O1E8_R1E9, O1E9_R1E10, O1E10_R1E11
None
None
None
None
OFF(OFF), ON(ON)
OFF, ON
None
OFF(OFF), ON(ON)
OFF, ON
None
WRFD020101
Admission Control
String Type
None
String Type
None
WRFD050421
IP Address Type
None
WRFD050421
IP Address Type
WRFD010102
Band1, Band2, None Band4, Band3, Band5, Band6, Band7, Band8, Band9, BandIndNotUsed
0.0.0.0~255.255.2 Band1, Band2, 55.255 Band4, None Band3, Band5, Band6, Band7, Band8, Band9, BandIndNotUsed None
WRFD020303
Enumeration Type
GSM900_DCS1800_ BAND_USED(Use GSM900M or 1800M frequency band), PCS1900_BAND_US ED(UseBand2, Band1, GSM1900M frequency band) Band3, Band4, Band5, Band6, Band7, Band8, Band9, BandIndNotUsed
GSM900_DCS180 0_BAND_USED, PCS1900_BAND_ Band1, Band2, USED Band4, None Band3, Band5, Band6, Band7, Band8, Band9, BandIndNotUsed None
WRFD010101
3GPP Specifications
Enumeration Type
WRFD010688
Enhanced CELL-FACH Inter-RAT Handover Based on Coverage Inter-RAT Handover Based on Coverage
1~1000
kbit/s
WRFD020303
0~7
None
WRFD020303
0~1023
None
WRFD010688
Enhanced CELL-FACH
-35~15, step:0.1
dB
WRFD010688
Enhanced CELL-FACH
-35~15, step:0.1
dB
WRFD020501
dB
WRFD050409
None
WRFD050424
Enumeration Type
R99, HSPA
R99, HSPA
None
WRFD040202
5 None
WRFD010101
3GPP Specifications
2 None
Interval Type 1~60 D8, D16, D32, D64, D128, D144, D256, D384
1~60
Intra RNC Softer Handover Inter RNC Soft Enumeration Handover Type
Enhanced CELL-FACH CPC - DTX / DRX CPC - HSSCCH less operation Dynamic UE State in Channel Enhanced Connected Configuration CELL-FACH Mode (CELLControl (DCCC) DCH,Frequency Inter CELLDynamic PCH, Handover Hard URAChannel PCH, CELLBased on DL Configuration FACH) QoS (DCCC) Control Inter-RAT Inter Frequency Dynamic Handover Hard Handover Channel DL Based on DL Based on Configuration QoS QoS (DCCC) Control Inter-RAT Inter Frequency Handover Hard Handover Based on DL Based on DL QoS QoS Inter-RAT Handoverin UE State Based on DL Connected QoS (CELLMode DCH, CELLPCH, URAEnhanced PCH, CELLCELL-FACH FACH)DTX / CPC DRX CPC - HSEnhanced SCCH less CELL-FACH operation / CPC - DTX DRX CPC - HSSCCH less operation
1~65535
1~65535
WRFD010688
1~65535
WRFDWRFD010202 021101 WRFD020304 WRFDWRFD020309 021101 WRFD020304 WRFDWRFD020309 021101 WRFD020304 WRFD020309
1~65535
Enumeration Type
None, None, RateDegrade, RateDegrade, InterFreqHO, InterFreqHO, InterRatHO InterRatHO None, None, RateDegrade, RateDegrade, InterFreqHO, InterFreqHO, InterRatHO InterRatHO None, None, RateDegrade, RateDegrade, InterFreqHO, InterFreqHO, InterRatHO InterRatHO
None
Enumeration Type
None
Enumeration Type
None
D16, D32, D64, D128, 16, 32, 64, 128, D256, D512, D1024, 256, 512, 1024, D2k, D3k, D4k, D6k, 2k, 3k, 4k, 6k, 8k, Interval Type 1~65535 D16k, 1~65535 24k, s D8k, D12k, 12k, 16k, D24k, D32k, D48k, 32k, 48k, 64k, D64k, D96k, D128k, 96k, 128k, 192k, Enumeration D192k, D256k,D40, 256k, 384k, 512k, D0, D10, D20, Type D384k, D512k, D768k 768k 20, 40, 60, byte D60, D80, D100, 0, 10, Enumeration Type D120, D160, D200, D240, D320, D640, D1280, D2560, D5000 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 ms
WRFD010688
Enhanced CELL-FACH
Enumeration Type
D16, D32, D64, D128, 16, 32, 64, 128, D256, D512, D1024, 256, 512, 1024, D2k, D3k, D4k, D6k, 2k, 3k, 4k, 6k, 8k, D8k, D12k, D16k, 12k, 16k, 24k, D24k, D32k, D48k, 32k, 48k, 64k, D64k, D96k, D128k, 96k, 128k, 192k, D192k, D256k,D40, 256k, 384k, 512k, D0, D10, D20, D384k, D512k, D768k 768k 20, 40, 60, byte D60, D80, D100, 0, 10, D120, D160, D200, D16, D32, D64, D128, 80, 100, 120, 160, 16, 32, 64, 128, D240, D320, D640, D256, D512, D1024, 200, 240, 320, 256, 512, 1024, D1280, D2560, D6k, 640, 1280, 6k, 8k, D2k, D3k, D4k, 2k, 3k, 4k, 2560, D5000 500016k, 24k, ms D8k, D12k, D16k, 12k, D24k, D32k, D48k, 32k, 48k, 64k, D64k, D96k, D128k, 96k, 128k, 192k, D192k, D256k,D40, 256k, 384k, 512k, D0, D10, D20, D384k, D512k, D768k 768k 20, 40, 60, byte D60, D80, D100, 0, 10, D120, D160, D200, D16, D32, D64, D128, 80, 100, 120, 160, 16, 32, 64, 128, D240, D320, D640, D256, D512, D1024, 200, 240, 320, 256, 512, 1024, D1280, D2560, D6k, 640, 1280, 6k, 8k, D2k, D3k, D4k, 2k, 3k, 4k, 2560, D5000 500016k, 24k, ms D8k, D12k, D16k, 12k, D24k, D32k, D48k, 32k, 48k, 64k, D64k, D96k, D128k, 96k, 128k, 192k, D192k, D256k,D40, 256k, 384k, 512k, D0, D10, D20, D384k, D512k, D768k 768k 20, 40, 60, byte D60, D80, D100, 0, 10, D120, D160, D200, D16, D32, D64, D128, 80, 100, 120, 160, 16, 32, 64, 128, D240, D320, D640, D256, D512, D1024, 200, 240, 320, 256, 512, 1024, D1280, D2560, D6k, 640, 1280, 6k, 8k, D2k, D3k, D4k, 2k, 3k, 4k, 2560, D5000 500016k, 24k, ms D8k, D12k, D16k, 12k, D24k, D32k, D48k, 32k, 48k, 64k, D64k, D96k, D128k, 96k, 128k, 192k, D192k, D256k,D40, 256k, 384k, 512k, D0, D10, D20, D384k, D512k, D768k 768k 20, 40, 60, byte D60, D80, D100, 0, 10, D120, D160, D200, D16, D32, D64, D128, 80, 100, 120, 160, 16, 32, 64, 128, D240, D320, D640, D256, D512, D1024, 200, 240, 320, 256, 512, 1024, D1280, D2560, D6k, 640, 1280, 6k, 8k, D2k, D3k, D4k, 2k, 3k, 4k, 2560, D5000 500016k, 24k, ms D8k, D12k, D16k, 12k, D24k, D32k, D48k, 32k, 48k, 64k, D64k, D96k, D128k, 96k, 128k, 192k, D192k, D256k,D40, 256k, 384k, 512k, D0, D10, D20, D384k, D512k, D768k 768k 20, 40, 60, byte D60, D80, D100, 0, 10, D120, D160, D200, D16, D32, D64, D128, 80, 100, 120, 160, 16, 32, 64, 128, D240, D320, D640, D256, D512, D1024, 200, 240, 320, 256, 512, 1024, D1280, D2560, D6k, 640, 1280, 6k, 8k, D2k, D3k, D4k, 2k, 3k, 4k, 2560, D5000 500016k, 24k, ms D8k, D12k, D16k, 12k, D24k, D32k, D48k, 32k, 48k, 64k, D64k, D96k, D128k, 96k, 128k, 192k, D192k, D256k,D40, 256k, 384k, 512k, D0, D10, D20, D384k, D512k, D768k 768k 20, 40, 60, byte D60, D80, D100, 0, 10, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 ms
WRFD010688
Enhanced CELL-FACH
Enumeration Type
WRFD010688
Enhanced CELL-FACH
Enumeration Type
Enhanced CELL-FACH CPC - DTX / DRX CPC - HSSCCH less operation / CPC - DTX DRX CPC - HSSCCH less operation / CPC - DTX DRX CPC - HSSCCH less operation / CPC - DTX DRX CPC - HSUE State in SCCH less Connected operation Mode (CELLDCH, CELLPCH, URAUE State in PCH, CELLConnected FACH) Mode (CELLDCH, CELLPCH, URAUE State in PCH, CELLConnected FACH) Mode (CELLDCH, CELLPCH, URAUE State in PCH, CELLConnected FACH) Mode (CELLDCH, CELLPCH, URAPCH, CELLFACH)
Enumeration Type
Enumeration Type
Enumeration Type
Enumeration Type
Enumeration Type
WRFD010202
Enumeration Type
WRFD010202
Enumeration Type
WRFD010202
Enumeration Type
WRFD010202
Enumeration Type
WRFD01061111
HSDPA State Transition UE State in HSDPA State Connected Transition Mode (CELLDCH, CELLPCH, URAPCH, CELLFACH)
Enumeration Type
D16, D32, D64, D128, 16, 32, 64, 128, D256, D512, D1024, 256, 512, 1024, D2k, D3k, D4k, D6k, 2k, 3k, 4k, 6k, 8k, D8k, D12k, D16k, 12k, 16k, 24k, D24k, D32k, D48k, 32k, 48k, 64k, D64k, D96k, D128k, 96k, 128k, 192k, D192k, D256k,D40, 256k, 384k, 512k, D0, D10, D20, D384k, D512k, D768k 768k 20, 40, 60, byte D60, D80, D100, 0, 10, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 ms
WRFD01061111
Enumeration Type
WRFD010202
1~65535
WRFD010688
Enhanced CELL-FACH
1~65535
WRFD01061111
WRFD01061111
WRFD01061111
Interval Type 1~65535 D8, D16, D32, D64, D128, D256, D512, D250, D500, D3k, D1024, D2k, D1000, Enumeration D2000, D4000, D12k, D4k, D6k, D8k, Type D8000, D16000 D16k, D24k, D32k, D48k, D64k, D96k, D128k, D192k, Enumeration D256k, D384k,D40, D0, D10, D20, Type D512k, D768k D60, D80, D100, Enumeration Type D120, D160, D200, D240, D320, D640, D1280, D2560, D5000 D8, D16, D32, D64, D128, D144, D256, D384, D608, D1440, D2048, D2880
1~65535
8, 16, 32, 64, 128, 250, 500, 1000, 256, 512, 1024, 2000, 4000, 8000, 2k, 3k, 4k, 6k, 8k, 16000 ms 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k 20, 40, 60, byte 0, 10, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 ms 8, 16, 32, 64, 128, 144, 256, 384, 608, 1440, 2048, 2880 kbit/s
WRFD01061111
WRFD01061403
Enumeration HSUPA 2ms TTI Type Dynamic Dynamic Channel Channel Configuration Configuration Control (DCCC) Control (DCCC) Dynamic Inter Frequency Channel Hard Handover Configuration Based on DL Control (DCCC) QoS Inter-RAT Handover Based on DL QoS
WRFD021101
0~1024
dB
Enumeration Type
NO, YES
NO, YES
None
WRFD020504
WRFDWRFD020504 021101 WRFD020304 WRFDWRFD020309 021101 WRFD020304 WRFDWRFD020309 021101 WRFD020304 WRFDWRFD020309 021101 WRFD020304 WRFDWRFD020309 021101 WRFD020304 WRFDWRFD020309 021101 WRFD020304 WRFDWRFD020309 021101 WRFD020304 WRFDWRFD020309 021101 WRFD020304 WRFD020309
Dynamic Channel Inner Loop Configuration Power Control Control (DCCC) Inter Frequency Dynamic Hard Handover Channel Inner Loop Based on DL Configuration Power Control QoS (DCCC) Control Inter-RAT Inter Frequency Dynamic Handover Hard Handover Channel Based on DL Based on DL Configuration QoS QoS (DCCC) Control Inter-RAT Inter Frequency Dynamic Handover Hard Handover Channel Based on DL Based on DL Configuration QoS QoS (DCCC) Control Inter-RAT Inter Frequency Dynamic Handover Hard Handover Channel Based on DL Based on DL Configuration QoS QoS (DCCC) Control Inter-RAT Inter Frequency Dynamic Handover Hard Handover Channel Based on DL Based on DL Configuration QoS QoS (DCCC) Control Inter-RAT Inter Frequency Dynamic Handover Hard Handover Channel DL Based on DL Based on Configuration QoS QoS (DCCC) Control Inter-RAT Inter Frequency Dynamic Handover Hard Handover Channel Based on DL Based on DL Configuration QoS QoS (DCCC) Control Inter-RAT Inter Frequency Handover Hard Handover Based on DL Based on DL QoS QoS Inter-RAT Handover Based on DL QoS IP Re-route Based on BFD/ARP
1~15
None
1~15
None
Enumeration Type
None, None, RateDegrade, RateDegrade, InterFreqHO, InterFreqHO, InterRatHO InterRatHO None, None, RateDegrade, RateDegrade, InterFreqHO, InterFreqHO, InterRatHO InterRatHO None, None, RateDegrade, RateDegrade, InterFreqHO, InterFreqHO, InterRatHO InterRatHO
None
Enumeration Type
None
Enumeration Type
None
Enumeration Type
SINGLE, COMBINE
SINGLE, COMBINE
None
Enumeration Type
NO, YES
NO, YES
None
Enumeration Type
NO, YES
NO, YES
None
Enumeration Type
NO, YES
NO, YES
None
20~64000
ms
WRFD050421
3~10
None
WRFD010688
Enhanced CELL-FACH
1~1000
kbit/s
WRFD010688
Enhanced CELL-FACH
1~2000
kbit/s
WRFD020101
Admission Control
0.1~40, step:0.1
dB
WRFD020101
Admission Control
WRFD020101
Admission Control
Compound Type
None
WRFD020101
Admission Control
None
WRFD020101
Admission Control
Compound Type
None
WRFD020101
Admission Control
Enumeration Type
OFF, ON
OFF, ON
None
WRFD020101
Admission Control
0.1~10, step:0.1
dBm
WRFD020503
5*10^(-7)~1
None
Inter Frequency Enumeration Load Balance Type Inter Frequency Load Balance Intra Frequency Enumeration Load Balance Type Inter Frequency Load Balance Intra Frequency Enumeration Load Balance Type
FALSE, TRUE
FALSE, TRUE
None
1, 2, 4, 8
None
D250, D500
250, 500
ms
WRFD020310
0~30
None
WRFD020103
Inter Frequency Load Balance Interval Type -115~-25 Inter Frequency Hard Handover Based on Coverage Interval Type -115~-25
-115~-25
dBm
WRFD020302
-115~-25
dBm
Enumeration Type
DISABLE(Disable), ENABLE(Enable)
DISABLE, ENABLE
None
0~65534
60~65534
Enumeration Type
DISABLE(Disable), ENABLE(Enable)
DISABLE, ENABLE
None
WRFD05030104
2000~60000
ms
None
None
Enumeration Type
NO(NO), YES(YES)
NO, YES
None
Enumeration Type
nonrpt, rpt
None
Enumeration Type
Enumeration Type
Enumeration Type
Enumeration Type
PEUa, AEUa, FG2a, GOUa, AOUa, POUa, PEUa, AEUa, FG2a, UOIa, AOUc, INT, DPU, XPU, GOUa, AOUa, POUa, INT, DPU, XPU, POUc, UOIc, OMU, AOUc, POUc, OMU, SAU UOIa, SAU FG2c, GOUc, UOIc, FG2c, GOUc, SPUa, SPUb, SPUa, SPUb, DPUb, DPUb, DPUe, DPUe, OMUa, OMUb, OMUa, OMUb, SAUa SAUa
None
None
None
None
Enumeration Type
None
None
None
Enumeration Type
None
Inter-RAT Handover None Based on Coverage Inter-RAT Security WRFDHandover MRFD-210305 Management 020303 Based on WRFDService 020305 Inter-RAT WRFDHandover 020306 Based on Load None
Enumeration Type
PEUa, POUa, PEUa, POUa, POUc POUc ENTIRE(Entire Backup), INCREMENTAL(Incre ENTIRE, mental Backup) INCREMENTAL REQUIRED(Verify mode), NOT_REQUIRE(Non- REQUIRED, verify mode) NOT_REQUIRE
None
Enumeration Type
None
Enumeration Type
None
Enumeration Type
XPU AEUa, PEUa, AOUa, SCUa, GCUa, GCGa, POUa, AEUa, AOUc, PEUa, UOIa, FG2a, POUc, UOIc POUa, GOUa, AOUa, UOIa, AOUc, POUc, UOIc, FG2c, GOUc, SCUa, GCUa, GCGa, SPUa, SPUb, DPUb, PEUa, AEUa, FG2a, DPUe AOUa, POUa, GOUa, UOIa, AOUc, POUc, UOIc, FG2c, GOUc, SPUa, SPUb, DPUb, DPUe, ALL
Enumeration MRFD-210502 BSC/RNC Clock Type BSC/RNC Software MRFD-210401 Management BSC/RNC Software MRFD-210401 Management
Enumeration Type
SCUa, XPU GCUa, GCGa, PEUa, AEUa, PEUa, AEUa, FG2a, AOUa, POUa, GOUa, AOUa, UOIa, AOUc, POUa, GCUa, SCUa, UOIa, POUc, UOIc AOUc, POUc, GCGa, PEUa, UOIc, FG2c, AEUa, FG2a, GOUc, SPUa, GOUa, AOUa, SPUb, DPUb, POUa, UOIa, DPUe POUc, AOUc, UOIc, FG2c, GOUc, SPUa, SPUb, DPUb, DPUe, ALL
None
None
None
Enumeration Type
None
WRFD05030101
AEUa, AOUa, AEUa, AOUa, AOUc, AOUc, PEUa, PEUa, POUa, POUc POUa, POUc
None
None
None
Enumeration Type
AEUa, AOUa, AEUa, AOUa, PEUa, PEUa, POUa, POUa, AOUc, POUc AOUc, POUc AEUa, AOUa, AEUa, AOUa, AOUc, AOUc, PEUa, PEUa, POUa, POUc POUa, POUc
None
WRFD05030101
ATM over E1T1 Enumeration on Iub Interface Type IMA for E1T1 or Channelized STM-1/OC-3 on Enumeration Iub Interface Type
None
WRFD050304
None
None
None
Enumeration Type
AOUa~5 POUa~6 UOIa~7 AOUc~13 AOUa, POUa, UOIa, UOIc~15 AOUc, UOIc, POUc POUc~14 None
WRFD05030102
AOUa, POUa, AOUc, AOUa, POUa, POUc AOUc, POUc AEUa, AOUa, UOIa, AOUc, UOIc FG2a, GOUa, UOIa, FG2c, GOUc, POUc
None
None
None
Enumeration Type
None
None
None
Enumeration Type
None
WRFD050402
NO(NO), YES(YES)
YES, NO
None
None
WRFD050406
Enumeration ATM QoS None OFF(OFF), ON(ON) Introduction on Type Hub NodeB (Overbooking on Hub Node B ATM QoS Transmission) Interval Type 0~200000 Introduction on Hub NodeB (Overbooking on Hub Node B ATM QoS Transmission) Interval Type 0~200000 Introduction on Hub NodeB (Overbooking on Hub Node B Transmission) Interval Type 0~100
OFF, ON
None
0~200000
kbit/s
WRFD050406
0~200000
kbit/s
WRFD050406
0~100
per cent
WRFD050406
ATM QoS Introduction on Hub NodeB (Overbooking on Hub Node B Transmission) Interval Type 0~100
0~100
per cent
WRFD020107
Overload Control
0~200000
kbit/s
WRFD020107
Overload Control
0~100
per cent
WRFD020107
Overload Control
0~200000
kbit/s
WRFD020107
Overload ATM QoS Control Introduction on Interval Type 0~100 Hub NodeB (Overbooking on Hub Node B ATM QoS Transmission) Interval Type 0~100 Introduction on Hub NodeB (Overbooking on Hub Node B Transmission) Interval Type 0~200000
0~100
per cent
WRFD050406
0~100
per cent
WRFD050406
0~200000
kbit/s
None
WRFD050406
ATM QoS None Introduction on Interval Type Hub NodeB (Overbooking on Hub Node B Enumeration Transmission) Type
100~1000
100~1000
per cent
None
None
None
0~100
per cent
WRFD020101
Admission Control
NODEB_CREDIT_CA NODEB_CREDIT Bit Field Type C_SWITCH _CAC_SWITCH None SYS_LEVEL, NODEB_LEVEL, Bit Field Type CELL_LEVEL SYS_LEVEL, NODEB_LEVEL, CELL_LEVEL
WRFD040100
Flow Control
None
WRFD040100
1~5
WRFD050424
Enumeration Type
None
WRFD05030104
WRFD050402
Dynamic AAL2 Connections in Iub/IuCS/Iur Interface Interval Type 0~11 NULL(NULL), IPLGCPORT(IP Logic IP Transmission Port), Introduction on Enumeration RSCGRP(Resource Iub Interface Type Group) Permanent AAL5 Connections for Control Plane Traffic Interval Type 0~31 Dynamic AAL2 Connections in Iub/IuCS/Iur Interface Interval Type 0~31
None
None
WRFD05030105
0~31
None
WRFD05030104
0~31
None
None
None
0~31
None
None
WRFD05030105
None Interval Type 0~31 Permanent AAL5 Connections for Control Plane Traffic Interval Type 0~167 Dynamic AAL2 Connections in Iub/IuCS/Iur Interface Interval Type 0~167
0~31
None
0~167
None
WRFD05030104
0~167
None
None
None
0~167
None
None
None
0~167
None
WRFD050301
Enumeration Type
None
WRFD05030105
AAL5 Connections for Control Plane Traffic Interval Type 0~7 Dynamic AAL2 Connections in Iub/IuCS/Iur Interface Interval Type 0~7
0~7
None
WRFD05030104
0~7
None
None
None
0~7
None
None
WRFD05030105
None Interval Type 0~7 Permanent AAL5 Connections for Control Plane Traffic Interval Type 0~5,8~27 Dynamic AAL2 Connections in Iub/IuCS/Iur Interface Interval Type 0~5,8~27 Permanent AAL5 Connections for Control Plane UNI(UNI), IMA(IMA), Traffic Interval Type 0~11 Permanent FRAATM(FRAATM), AAL5 NCOPT(NCOPT), UNI(UNI Link), Connections for ATMLOGICPORT(AT IMA(IMA Group), Control Plane Enumeration MLOGICPORT), FRAATM(FRAATM Traffic Type NULL(NULL) Link), NCOPT(Optical Dynamic AAL2 Connections in Iub/IuCS/Iur Enumeration Interface Type Port), ATMLOGICPORT(AT M Logical Port), NULL(NULL) IMA, UNI, FRAATM, NCOPT, ATMLOGICPORT, NULL IMA, UNI, FRA, NCOPT, ATMLOGICPORT
0~7
None
0~5, 8~27
None
WRFD05030104
0~5, 8~27
None
WRFD05030105
WRFD05030105
0~11IMA, None UNI, FRAATM, NCOPT, ATMLOGICPORT, NULL None UNI, IMA, FRAATM, NCOPT, ATMLOGICPORT, NULL None IMA, UNI, FRAATM, NCOPT, ATMLOGICPORT, NULL None IMA, UNI, FRA, NCOPT, ATMLOGICPORT None
WRFD05030104
None
None
Enumeration Type
None
None
Enumeration Type
None
Enumeration Type
WRFD050421
Enumeration Type
ETHPORT, TRUNK
ETHPORT, TRUNK
None
WRFD05030105
AAL5 Connections for Control Plane Traffic Interval Type 0~335 Dynamic AAL2 Connections in Iub/IuCS/Iur Interface Interval Type 0~335
0~335
None
WRFD05030104
0~335
None
None
None
0~335
None
None
WRFD05030105
None Interval Type 0~335 Permanent AAL5 Connections for Control Plane Traffic Interval Type 32~65535
0~335
None
32~65535
None
None
WRFD05030105
None Interval Type 32~65535 Permanent AAL5 Connections for Control Plane Traffic Interval Type 0~4095
32~65535
None
0~4095
None
None
WRFD050406
ATM QoS None Introduction on Interval Type 0~4095 Hub NodeB (Overbooking on Hub Node B Transmission) Interval Type 0~499 Dynamic AAL2 Connections in Iub/IuCS/Iur Interface Interval Type 0~499
0~4095
None
0~499
None
WRFD05030104
0~499
None
None
None
0~499
None
WRFD011000
IP Address Type
None
WRFD011000
IP Address Type
None
None
None
4500~32767
byte
WRFD040100
Flow Control
30~100
per cent
WRFD040100
Flow Control
30~100
per cent
WRFD011000
0~3
None
WRFD040100
Flow Control
30~100
per cent
WRFD040100
Flow Control
30~100
per cent
WRFD011000
0~65535
None
WRFD011000
0~65535
None
WRFD040100
Flow Control
Enumeration Type
ON, OFF
ON, OFF
None
WRFD011001
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None
WRFD010688
WRFD010688
WRFD050406
WRFD050404
WRFD050406
DISABLE(Disabled), ENABLE(Enabled) CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, Enhanced AF21, AF22, AF23, CELL-FACH Interval Type 1~1000 AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, Enhanced ATM QoS LQAF12, LQAF13, CELL-FACHon Interval Type 1~2000 LQAF22, CBR, RT_VBR, Introduction LQAF21, NRT_VBR, UBR, BE, Hub NodeB LQAF23, LQAF31, AF11, AF12, AF13, (Overbooking LQAF32, LQAF33, AF21, AF22, AF23, on Hub Node B Enumeration LQAF41, LQAF42, AF31, AF32, AF33, Transmission) Type LQAF43, LQEF AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, ATM/IP Dual ATM QoS LQAF21, LQAF22, Stack Node B Interval Type 0~100 LQAF31, Introduction on LQAF23, Hub NodeB LQAF32, LQAF33, (Overbooking LQAF41, LQAF42, on Hub Node B Enumeration LQAF43, LQEF, Transmission) Type NULL
Enumeration Type
DISABLE, CBR, RT_VBR, ENABLE UBR, None NRT_VBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, 1~1000 kbit/s AF33, AF41, AF42, AF43, EF, CBR, RT_VBR, LQBE, LQAF11, NRT_VBR, UBR, LQAF12, LQAF13, 1~2000 LQAF22, kbit/s BE, AF11, AF12, LQAF21, AF13, AF21, LQAF23, LQAF31, AF22, AF23, LQAF32, LQAF33, AF31, AF32, LQAF41, LQAF42, AF33, AF41, LQAF43, LQEF None AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, 0~100 LQAF31, None LQAF23, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL None
WRFD050404
0~100
None
WRFD050425
Enumeration Type
ms
WRFD050301
700~1000(UNI), 100~1000(NNI)
ms
None
None
1024~212000
100ns
WRFD040100
Flow Control
1~100
None
WRFD020801
Cell ID + RTT Function Based LCS Interval Type Cell ID + RTT Function Based LCS Interval Type
WRFD020801
WRFD020101
Admission Control
WRFD020203
EDCH_SF4_SUPPO EDCH_HARQ_IR RT, _COMBIN_SUPP EDCH_SF8_SUPPO ORT, RT, EDCH_HARQ_CH EDCH_HARQ_IR_C ASE_COMBIN_S OMBIN_SUPPORT, UPPORT, EDCH_HARQ_CHAS CPC_DTX_DRX_ E_COMBIN_SUPPO SUPPORT, RT, CPC_HS_SCCH_ CPC_DTX_DRX_SU LESS_OPER_SU -32767~32767 -32767~32767 m PPORT, PPORT, CPC_HS_SCCH_LE HSPAPLUS_MIM SS_OPER_SUPPOR O_SUPPORT, T, HSPAPLUS_UL_1 HSPAPLUS_MIMO_S -107502~107502 m 6QAM_SUPPORT -107502~107502 UPPORT, , TX_DIVERSITY_ON_ TX_DIVERSITY_ HSPAPLUS_UL_16Q FLEX_MACD_PD TO_OFF, ON_TO_OFF, AM_SUPPORT, U_SIZE_SUPPOR TX_DIVERSITY_OFF TX_DIVERSITY_ FLEX_MACD_PDU_ T, _TO_ON OFF_TO_ON SIZE_SUPPORT, FDPCH_SLOT_F None FDPCH_SLOT_FOR ORMAT_SUPPO MAT_SUPPORT, RT, HSPAPLUS_DL_64Q HSPAPLUS_DL_6 AM_SUPPORT 4QAM_SUPPORT None
WRFD020801
Cell ID + RTT Function Based LCS Interval Type -32767~32767 Cell ID + RTT Function Based LCS Interval Type -107502~107502
-32767~32767
WRFD020801
-107502~107502 m
WRFD020801
Cell ID + RTT Function Based -90~90, step: LCS Interval Type -90000000~90000000 0.000001 Cell ID + RTT Function Based LCS String Type
degree
WRFD020801
None
-90~90
second
WRFD020801
Cell ID + RTT Function Based 180000000~1800000 -180~180, step: LCS Interval Type 00 0.000001 Intra RNC Softer Cell ID + RTT Handover Function Based Inter RNC Soft LCS String Type Handover Inter-RAT Handover Based on Enumeration Coverage Type Cell ID + RTT Function Based Enumeration LCS Type
degree
None ALLCELL(All cell), 3GCELL(3G cell), NLOS_ENVIRONME GSMCELL(GSM cell) NT, LOS_ENVIRONMEN T, MIXED_ENVIRONME NT
-180~180
second
ALLCELL, 3GCELL, NLOS_ENVIRON GSMCELL None MENT, LOS_ENVIRONM ENT, MIXED_ENVIRON MENT None
WRFD020801
WRFD020101
Admission Control
Enumeration Type
TU, RA, HT
TU, RA, HT
None
WRFD020801
Cell ID + RTT Function Based LCS Interval Type -10000~10000 Cell ID + RTT Function Based LCS Interval Type -32808~32808
-10000~10000
WRFD020801
-32808~32808
WRFD040100
Flow Control
1~100
None
WRFD040202
Enumeration Type
SINGLE_HOST, DOUBLE_HOST
SINGLE_HOST, DOUBLE_HOST
None
0~65535
None
WRFD010101
3GPP Specifications
0~65535
None
None
None
0~65535
None
None
None
0~65535
None
None
None
0~65535
None
WRFD020202
0~65535
None
WRFD020203
0~65535
None
WRFD020303
0~65535
None
WRFD020101
Admission Control
1~31
WRFD020101
Admission Control
Enumeration Type
OFF, ON
OFF, ON
None
WRFD020801
Cell ID + RTT Function Based Enumeration LCS Type Cell ID + RTT Function Based Enumeration LCS Type
WRFD020801
UE_BASED, INACTIVE, ACTIVE UE_ASSISTED, UE_BASED_PREFE RRED, UE_ASSISTED_PRE SF4(SF4), SF8(SF8), FERRED SF16(SF16), SF32(SF32), SF64(SF64), SF128(SF128), SF256(SF256) CELL_ANTENNA, CELL_CENTER, BOTH
None
UE_BASED_PRE FERRED, UE_ASSISTED_P REFERRED None SF4, SF8, SF16, SF32, SF64, SF128, SF256
WRFD020106
Load Reshuffling
Enumeration Type
None
WRFD020801
None
None
String Type
None
1~31 characters
None
WRFD020104
WRFD010202
UE State in Intra Frequency Connected Load Balance Interval Type 0~100 Mode (CELLDCH, CELLPCH, URAUE State in PCH, CELLConnected FACH) Interval Type 1~65535 Mode (CELLDCH, CELLPCH, URAPCH, CELLFACH)
0~1, step:0.01
per cent
1~65535
None
WRFD010202
1~65535
WRFD021103
Enumeration Type
RESERVED, NOT_RESERVED
Access Class Enumeration Intra Node B Restriction Softer Handover Type Intra RNC Softer Handover Inter RNC Soft Enumeration Intra Node B Handover Softer Handover Type Intra RNC Softer Handover Inter RNC Soft Enumeration Handover Type
RESERVED, NOT_RESERVED
AFFECT, NOT_AFFECT
AFFECT, NOT_AFFECT
None
AFFECT, NOT_AFFECT
AFFECT, NOT_AFFECT
None
WRFD040100
Flow Control
1~100
None
WRFD020104
0~1, step:0.01
per cent
WRFD040100
Flow Control
30~100
per cent
WRFD040100
Flow Control
30~100
per cent
WRFD040100
Flow Control
30~100
per cent
WRFD040100
Flow Control
30~100
per cent
WRFD040100
Flow Control
Enumeration Type
ON, OFF
ON, OFF
None
String Type
WRFD020605
Enumeration Type
None NOT_REQUIRE(Not 0~200 characters None configure RAC information), REQUIRE(Configure NOT_REQUIRE, RAC information) REQUIRE None
Services Combination of One CS Service and Two PS Services Combination of Three PS Services Combination of 3GPP Service Enumeration One CS Specifications Type and Three PS Services PDCP Header Compression (RFC2507) Bit Field Type
_SWITCH, ECHG_SWITCH, CFG_LOSSLESS_DL CFG_LOSSLESS RLC_PDUSIZECHG_ _RELOC_CFG_S SWITCH, WITCH, CFG_LOSSLESS_RE CFG_MULTI_RAB LOC_CFG_SWITCH, _SWITCH, CFG_MULTI_RAB_S CFG_PDCP_IPV6 WITCH, _HEAD_COMPRE CFG_PDCP_IPV6_H SS_SWITCH, NOT_REQUIRE, EAD_COMPRESS_S NOT_REQUIRE, CFG_PDCP_RFC REQUIRE REQUIRE WITCH, 2507_HC_SWITC None CFG_PDCP_RFC250 H, 7_HC_SWITCH, CFG_PDCP_RFC CFG_PDCP_RFC309 3095_HC_SWITC G_0~0 G_1~1 G_2~2 5_HC_SWITCH G_3~3 G_4~4 G_5~5 H G_0, G_1, G_2, None G_6~6 G_7~7 G_8~8 G_15, G_16, G_3, G_4, G_5, G_17, G_18, G_9~9 G_10~10 G_6, G_7, G_8, G_19, G_20, G_11~11 G_12~12 G_9, G_10, G_11, Password G_15, G_16, G_17, G_21, G_22, G_13~13 G_14~14 G_12, G_13, Type None G_19, G_20, 1~32 characters None G_18, G_23, G_24, G_15~15 G_16~16 G_14, G_15, G_21, G_22, G_23, G_25, G_26, G_17~17 G_18~18 G_16, G_17, G_24, G_25, G_26, G_27, G_28, G_19~19 G_20~20 G_18, G_19, Enumeration G_27, G_28, G_29, G_29, G_30, G_21~21 G_22~22 G_20, G_21, Type G_30, G_31 G_31 G_23, None G_23~23 G_24~24 G_22, G_25~25 G_26~26 G_24, G_25, G_27~27 G_28~28 G_26, G_27, G_29~29 G_30~30 G_28, G_29, Bit Field Type G_31 G_30, G_31 None
String Type
None
1~32 characters
None
WRFD021101
Dynamic Channel Configuration Control (DCCC) Interval Type 0~999 Dynamic Channel Configuration Control (DCCC) Interval Type 0~180 Transport Channel Management NO_CODING, CONVOLUTIONAL, TURBO
0~999
WRFD021101
0~180
WRFD021000
Enumeration Type
WRFD050402
WRFD010665
IP Transmission Introduction on Iub Interface Interval Type 1~5 CH0(Channel 0), CH1(Channel 1), MBMS Channel CH2(Channel 2), Audience Rating Enumeration CH3(Channel 3), Statistics Type CH4(Channel 4) IP Re-route Based on BFD/ARP
1~5
None
None
WRFD050421
0~511
None
None
None
0~511
None
WRFD050402
IP Transmission Introduction on Enumeration Iub Interface Type IP Transmission Introduction on Enumeration Iub Interface Type IP Transmission Introduction on Enumeration Iub Interface Type IP Re-route Based on BFD/ARP
NO(NO), YES(YES)
NO, YES
None
WRFD050402
NO(NO), YES(YES)
NO, YES
None
WRFD050402
WRFD050421
Enumeration Type
None
WRFD020102
Load Measurement
Enumeration Type
TEN_MSEC, MIN
WRFD020102
Load Measurement
Enumeration Type
TEN_MSEC, MIN
WRFD020102
Load Measurement
Enumeration Type
TEN_MSEC, MIN
WRFD020102
Load Measurement
Enumeration Type
TEN_MSEC, MIN
WRFD020102
Load Measurement
Enumeration Type
TEN_MSEC, MIN
WRFD020102
Load Measurement
Enumeration Type
TEN_MSEC, MIN
WRFD020102
Load Measurement
Enumeration Type
TEN_MSEC, MIN
AMR/WB-AMR Speech Rates Control Inter-RAT Dynamic Handover Channel Based on DL Enumeration Configuration QoS (DCCC) Type Control Inter-RAT Dynamic Handover Channel Based on DL Enumeration Configuration QoS (DCCC) Type Control Inter-RAT Handover Based on DL QoS Enumeration Type
TEN_MSEC, MIN
TEN_MSEC, MIN
TEN_MSEC, MIN
WRFD020304
Inter Frequency Hard Handover Based on DL Enumeration QoS Type MBMS Channel Audience Rating Enumeration Statistics Type Inter-RAT Handover Based on Coverage
TEN_MSEC, MIN
WRFD010665
OFF(OFF), ON(ON)
OFF, ON
None
WRFD020303
0~65535
None
WRFD020203
-10~10, step:0.5
None
WRFD020303
-50~50
dB
Intra Frequency Hard Handover Interval Type -20~20 Intra RNC Softer Handover Inter RNC Soft Handover Interval Type -20~20 Inter-RAT Handover Based on Coverage
dB
-10~10, step:0.5
dB
WRFD020303
-50~50
dB
None
None
64~100000, step:64
kbit/s
None
None
Enumeration Type
Inter Frequency Physical Hard Handover Channel Enumeration Based on Management Type Coverage Inter-RAT Inter-RAT Handover Handover Based on Based on Coverage Bit Field Type Coverage Inter Frequency Inter Frequency Hard Handover Hard Handover Based on Enumeration Based on Coverage Type Coverage Inter-RAT Handover Based on Coverage
WRFD010101
3GPP Specifications
Interval Type
String Type
String Type
None
None
Interval Type
None
None
OVERY:5E-6), ERR_PFM_1E5(REC OVERY:1E-5), ERR_PFM_5E5(REC OVERY:5E-5), ERR_PFM_1E6, ERR_PFM_1E4(REC ERR_PFM_5E6, OVERY:1E-4), ERR_PFM_1E5, ERR_PFM_5E4(REC ERR_PFM_5E5, OVERY:5E-4), ERR_PFM_1E4, WALKING_SPEE ERR_PFM_1E3(REC ERR_PFM_5E4, D_AND_HOT_SP OVERY:1E-3) ERR_PFM_1E3 None OT_CELL, WALKING_SPEED_A MID_SPEED_AN ND_HOT_SPOT_CE D_HOT_SPOT_C LL, ELL, MID_SPEED_AND_H GCUa, GCGa HIGH_SPEED_A None GCUa, GCGa OT_SPOT_CELL, ND_HOT_SPOT_ HIGH_SPEED_AND_ CELL, HOT_SPOT_CELL, LOW_SPEED_AN LOW_SPEED_AND_ CMP_IU_IMS_PR D_MEDIUM_COV OC_AS_NORMAL cleared, uncleared MEDIUM_COVERAG cleared, uncleared None ERAGE_CELL, _PS_SWITCH, E_CELL, HIGH_SPEED_A HIGH_SPEED_AND_ CMP_IU_SYSHOI ND_MEDIUM_CO MEDIUM_COVERAG N_CMP_IUUP_FI VERAGE_CELL, CMP_IU_IMS_PROC XTO1_SWITCH, E_CELL, LOW_SPEED_AN None TRUE, FALSE TRUE, FALSE _AS_NORMAL_PS_S CMP_IUR_H2D_F LOW_SPEED_AND_ D_HIGH_COVER WITCH, HIGH_COVERAGE_ OR_LOWR5_NRN AGE_CELL, UL_ONLY, CMP_IU_SYSHOIN_ UL_ONLY, CCELL_SWITCH, CELL, HIGH_SPEED_A DL_ONLY, CMP_IUUP_FIXTO1_ DL_ONLY, HIGH_SPEED_AND_ CMP_IUR_SHO_ CMCF_DL_HLS_SWI ND_HIGH_COVE None CMCF_DL_HLS_ UL_DL_BOTH SWITCH, DIVCTRL_SWITC HIGH_COVERAGE_ UL_DL_BOTH RAGE_CELL, TCH, CMP_IUR_H2D_FOR SWITCH, H, CELL, CMCF_UL_HLS_SWI PICO_NODEB_T CMCF_UL_HLS_ _LOWR5_NRNCCEL CMP_UU_AMR_S PICO_NODEB_TYPE YPE_COVERAGE TCH, SWITCH, L_SWITCH, _COVERAGE_CELL, ID_MUST_CFG_S CMCF_UL_PRECFG _CELL, CMCF_UL_PREC CMP_IUR_SHO_DIV WITCH, OTHER_CELL _TOLERANCE_SWIT OTHER_CELL FG_TOLERANCE None CTRL_SWITCH, CMP_UU_DST_S CH, CMP_UU_AMR_SID_ _SWITCH, ERV_CELL_D2E_ CMCF_WITHOUT_U CMCF_WITHOUT MUST_CFG_SWITC SWITCH, E_CAP_REPORT_S _UE_CAP_REPO H, CMP_UU_IGNOR WITCH CMP_UU_DST_SER RT_SWITCH E_UE_RLC_CAP_ None V_CELL_D2E_SWIT SWITCH, CH, CMP_UU_SERV_ CMP_UU_IGNORE_ CELL_CHG_WIT UE_RLC_CAP_SWIT H_ASU_SWITCH, ms 1~10000 1~10000 CH, CMP_UU_SERV_ CMP_UU_SERV_CE CELL_CHG_WIT LL_CHG_WITH_ASU H_RB_MOD_SWI _SWITCH, TCH, None CMP_UU_SERV_CE 1~200 characters None CMP_UU_VOIP_ LL_CHG_WITH_RB_ UP_PROC_AS_N MOD_SWITCH, ORMAL_PS_SWI CMP_UU_VOIP_UP_ TCH, PROC_AS_NORMAL CMP_UU_FDPCH None None 0~128 characters _PS_SWITCH, _COMPAT_SWIT CMP_UU_FDPCH_C CH, OMPAT_SWITCH, CMP_UU_AMR_D CMP_UU_AMR_DRD RD_HHO_COMP 0~19 None _HHO_COMPAT_SW 0~19 AT_SWITCH, ITCH, CMP_IU_QOS_A CMP_IU_QOS_ASY SYMMETRY_IND MMETRY_IND_COM _COMPAT_SWIT PAT_SWITCH CH None
1~3
None
WRFD010101
3GPP Enumeration Specifications Type 3.4/6.8/13.6/27. 2 kbit/s RRC Connection and RAB Enumeration Assignment Type
CS_DOMAIN, PS_DOMAIN
CS_DOMAIN, PS_DOMAIN
None
WRFD010510
CS_DOMAIN, PS_DOMAIN
CS_DOMAIN, PS_DOMAIN
None
WRFD020101
Admission Control
Enumeration Type
CS_DOMAIN, PS_DOMAIN
CS_DOMAIN, PS_DOMAIN
None
WRFD010101
0~4095
None
WRFD021306
Enumeration Type
NORMAL, NORMAL, OFFLOAD, OFFLOAD, INHIBITED INHIBITED SHARE(SHARE), EXCLUSIVE(EXCLU SHARE, SIVE) EXCLUSIVE
None
WRFD021305
Enumeration Type
None
0~3
None
RAN Sharing None Introduction Package MOCN Introduction Package MOCN Introduction Package
0~3
None
String Type
None
1~31 characters
None
WRFD021311
0~31
None
WRFD020203
0~31
None
WRFD020303
0~31
None
WRFD021311
String Type
None
1~31 characters
None
RAN Sharing RAN Sharing Phase 2 Introduction Package MOCN Introduction Package
0~3
None
0~3
None
WRFD021301
Shared Network Support in Connected Mode Interval Type 0~3,5~31 Domain Specific Access Control (DSAC) Interval Type 0~3
0~3, 5~31
None
WRFD020114
0~3
None
RAN Sharing None Introduction Package MOCN Introduction RAN Sharing Package Introduction Package MOCN Introduction RAN Sharing Package Introduction Package MOCN Introduction RAN Sharing Package Introduction Package MOCN Introduction Package MOCN Introduction Package
0~3
None
0~3, 5~31
None
0~3, 5~31
None
0~3, 5~31
None
0~3, 5~31
None
WRFD021311
5~31, 255
None
WRFD021304 WRFD021311
Enumeration Type
1, 2, 3, 4
None
WRFD010101
3GPP Specifications
Enumeration Type
1~150000
None
10000~50000
None
0~250
None
0~250
None
WRFD020108
OFF(OFF), ON(ON)
OFF, ON
None
WRFD020108
Code Resource Management Interval Type 1~16 DRD Introduction Package DRD Introduction Package DRD Introduction Package DRD Introduction Package
1~16
None
WRFD020400
0~100
per cent
WRFD020400
0~100
per cent
WRFD020400
Enumeration Type
SF4, SF8, SF16, SF4, SF8, SF16, SF32, SF64, SF128, SF32, SF64, SF256 SF128, SF256 SF4, SF8, SF16, SF4, SF8, SF16, SF32, SF64, SF128, SF32, SF64, SF256 SF128, SF256
None
WRFD020400
Enumeration Type
None
WRFD020400
Enumeration Type
WRFD020400
Enumeration Type
WRFD020106
Load Reshuffling
Enumeration Type
WRFD011001
Enumeration Type
Inter Frequency Transport Hard Handover WRFDChannel Enumeration Based on 021000 Management Type Coverage WRFDInter-RAT 020302 Handover WRFDBased on Enumeration 020303 Coverage Type Load Based handover MBMS enhancement WRFDSoft/Selective on Iur-g (3G to Interval Type 01061604 Combining 2G) Dynamic MBSC Load Channel Balancing WRFDConfiguration MBSC Service 021101 MRFD-211402 Control (DCCC) Interval Type Distribution MRFD-211403 MBSC MRFD-211404 Handover based WRFDon Load 071101 Enhancement Interval Type MOCN Introduction Package
GERMAN(German), ENGLISH(English), ITALIAN(Italian), FRENCH(French), GERMAN, SPANISH(Spanish), ENGLISH, DUTCH(Dutch), ITALIAN, ON, OFF None SWEDISH(Swedish), ON, OFF FRENCH, DANISH(Danish), SPANISH, PORTUGUESE(Portu DUTCH, guese), SWEDISH, FINNISH(Finnish), DANISH, ON, OFF ON, OFF None NORWEGIAN(Norwe PORTUGUESE, gian), FINNISH, GREEK(Greek), NORWEGIAN, FALSE(FALSE), TURKISH(Turkish), GREEK, TRUE(TRUE) None HUNGARIAN(Hungari FALSE, TRUE TURKISH, an), POLISH(Polish), HUNGARIAN, LANGUAGEUNSPEC POLISH, IFIED(Languageunsp LANGUAGEUNSP COEXIST_MEAS_TH ECIFIED ecified) None D_CHOICE_INTERF REQ(Choosing the inter-frequency oriented parameters), COEXIST_MEAS_ D1/2, D1/3 COEXIST_MEAS_TH 1/2, 1/3 THD_CHOICE_IN None D_CHOICE_INTERR TERFREQ, AT(Choosing the COEXIST_MEAS_ inter-RAT oriented THD_CHOICE_IN parameters) TERRAT None
0~100
per cent
0~100
dB
WRFD021311
Enumeration Type
1~20
None
WRFD050301
1~7
WRFD050301
ATM Transmission Introduction Package ATM Transmission Introduction Package 2G/3G Co-
30~90
WRFD050301
10~200
ms
Transmission Resources Management MRFD-211503 on MBSC 2G/3G CoTransmission Resources Management MRFD-211503 on MBSC 2G/3G CoTransmission Resources Management MRFD-211503 on MBSC 2G/3G CoTransmission Resources Management MRFD-211503 on MBSC 2G/3G CoTransmission Resources Management MRFD-211503 on MBSC 2G/3G CoTransmission Resources Management MRFD-211503 on MBSC 2G/3G CoTransmission Resources Management MRFD-211503 on MBSC 2G/3G CoTransmission Resources Management MRFD-211503 on MBSC 2G/3G CoTransmission Resources Management MRFD-211503 on MBSC 2G/3G CoTransmission Resources Management MRFD-211503 on MBSC
10~150
ms
10~150
ms
10~150
ms
10~150
ms
10~150
ms
10~150
ms
10~150
ms
10~150
ms
10~150
ms
10~150
ms
2G/3G CoTransmission Resources Management MRFD-211503 on MBSC 2G/3G CoTransmission Resources Management MRFD-211503 on MBSC
10~150
ms
10~150
ms
Service Steering Access Class Enumeration and Load Restriction RRC Type Sharing in Connection Setup Inter System Enumeration Redirect Type
None
WRFD021103
Enumeration Type
ALLOWED, NOT_ALLOWED
Enumeration Type
NO(NO), YES(YES)
NO, YES
None
WRFD010801
0~40, step:2
dB
Intra RNC Cell Update Intra RNC Cell Update Inter RNC Cell Update Intra RNC Cell Update Inter RNC Cell Update
dB
-50~50
dB
-50~50
dB
WRFD010801
dB
WRFD010801
dB
WRFD021103
Enumeration Type
D10(10 seconds), D20(20 seconds), D40(40 seconds), D80(80 seconds), D160(160 seconds), D320(320 seconds), 10, 20, 40, 80, D640(640 seconds), 160, 320, 640, D1280(1280 seconds) 1280 ALL(ALL Type), ONLY_SSL(Only SSL Connection) ALL, ONLY_SSL
Enumeration Type
None
WRFD020501
-35~-10
dB
None
Enumeration Type
NO(NO), YES(YES) D0, D8, D16, D32, D64, D128, D144, D256, D384
NO, YES
None
WRFD050424
Enumeration Type
D0, D8, D16, D32, D64, D128, D144, D256, D384 kbit/s D0, D8, D16, D32, D64, D128, D144, D256, D384 kbit/s
WRFD050424
WRFD010688
WRFD010688
WRFD020701
WRFD020701
D0, D8, D16, D32, NBAMR_BITRATE_4. D64, D128, D144, 75K, D256, D384 NBAMR_BITRATE_5. WBAMR_BITRATE_6 15K, .60K, NBAMR_BITRATE_5. WBAMR_BITRATE_8 90K, Enhanced .85K, CELL-FACH Interval Type NBAMR_BITRATE_6. 1~1000 WBAMR_BITRATE_1 70K, 2.65K, NBAMR_BITRATE_7. WBAMR_BITRATE_1 40K, 4.25K, Enhanced NBAMR_BITRATE_7. WBAMR_BITRATE_1 CELL-FACH Interval Type 1~2000 95K, 5.85K, NBAMR_BITRATE_1 WBAMR_BITRATE_1 AMR/WB-AMR 0.20K, 8.25K, Speech Rates Enumeration NBAMR_BITRATE_1 WBAMR_BITRATE_1 Control Type 2.20K 9.85K, WBAMR_BITRATE_2 AMR/WB-AMR 3.05K, Speech Rates Enumeration WBAMR_BITRATE_2 Control Type 3.85K Enumeration Type
1~1000
kbit/s
kbit/s
kbit/s
6.60, 8.85, 12.65, 14.25, 15.85, 18.25, 19.85, 23.05, 23.85 kbit/s
None
None
1~28
None
WRFD011402
Encryption
1024~429496729 5 None
WRFD011402
Encryption
Enumeration Type
ON, OFF
ON, OFF
None
WRFD020203
Enumeration Type
CP1_Supported, CP1_Supported, CP1_not_Support CP1_not_Supported ed None CP1_Supported, CP1_Supported, CP1_not_Support CP1_not_Supported ed None
WRFD022000
Enumeration Type
WRFD040100
Flow Control
30~100
per cent
WRFD040100
Flow Control
30~100
per cent
WRFD040100
Flow Control
40~100
per cent
WRFD010686
Enumeration Type
D0, D1, D2, D4, D8, D16, D32, D64, D128, 0, 1, 2, 4, 8, 16, D256, D512, 32, 64, 128, 256, INFINITY 512, INFINITY D0, D2, D4, D8, D10, 0, 2, 4, 8, 10, 20, D20, D40, D80, D160, 40, 80, 160, 16, D16, D32, D64 32, 64
None
WRFD010686
Enumeration Type
ms
String Type
None
Enumeration Type
DISABLE(Disable), ENABLE(Enable)
DISABLE, ENABLE
None
WRFD021200
1~16
None
WRFD050403
Enumeration Type
None
30~100
per cent
30~100
per cent
System ATM QoS MRFD-210101 Redundancyon Introduction WRFD050406 Hub NodeB (Overbooking on Hub Node B ATM QoS Transmission) Introduction on Hub NodeB (Overbooking on Hub Node B Transmission)
WRFD050406
WRFD050404
ATM/IP Dual ATM QoS Stack Node B Introduction on Hub NodeB (Overbooking on Hub Node B Transmission)
WRFD050406
Interval Type 30~100 CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, Interval Type 30~100 AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, Interval Type 0~100RT_VBR, CBR, LQAF21, LQAF22, NRT_VBR, UBR, BE, LQAF23, LQAF31, AF11, AF12, AF13, LQAF32, LQAF33, AF21, AF22, AF23, Enumeration LQAF41, LQAF42, AF31, AF32, AF33, Type LQAF43, LQEF AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, Interval Type 0~100 LQAF31, LQAF23, LQAF32, LQAF33, LQAF41, LQAF42, Enumeration LQAF43, LQEF, Type NULL
CBR, RT_VBR, 30~100 NRT_VBR, UBR, per cent BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, 30~100 per cent AF33, AF41, AF42, AF43, EF, CBR, RT_VBR, LQBE, LQAF11, NRT_VBR, UBR, LQAF12, LQAF13, 0~100 LQAF22, per cent BE, AF11, LQAF21, AF12, AF13, AF21, LQAF23, LQAF31, AF22, AF23, LQAF32, LQAF33, AF31, AF32, LQAF41, LQAF42, AF33, AF41, LQAF43, LQEF None AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, 0~100 LQAF31, None LQAF23, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL None
WRFD050404
ATM/IP Dual ATM QoS Stack Node B Interval Type 0~100 Introduction on Hub NodeB (Overbooking on Hub Node B Transmission) Interval Type 0~100
0~100
None
WRFD050406
0~100
per cent
Inter-RAT License Handover MRFD-210403 Management Interval Type 0~80400 Based on WRFDService 020305 Inter-RAT WRFDHandover 020306 Based on Load Interval Type 0~100
0~80400
Erl
0~100
per cent
WRFD021306
Iu Flex Load Distribution Management Iu Flex Load Distribution RAN Sharing Management Introduction Package MOCN Introduction RAN Sharing Package Introduction Package MOCN Introduction Package
Enumeration Type
OFF, ON
OFF, ON
None
1~10
None
WRFD020114
Domain Specific Access Control Enumeration (DSAC) Type Domain Specific Access Control Enumeration (DSAC) Type
FALSE, TRUE
FALSE, TRUE
None
WRFD020114
WRFD020305
WRFD050406
WRFD050406
WRFD050404
WRFD050406
FALSE, TRUE CBR, RT_VBR, Inter-RAT NRT_VBR, UBR, BE, Handover Based on Enumeration AF11, AF12, AF13, ATM QoS AF21,ON Service OFF, AF22, AF23, Introduction on Type AF31, AF32, AF33, Hub NodeB AF41, AF42, AF43, (Overbooking EF, LQBE, LQAF11, on Hub Node B ATM QoS LQAF12, LQAF13, Transmission) Interval Type 0~100RT_VBR, CBR, Introduction on LQAF21, LQAF22, NRT_VBR, UBR, BE, Hub NodeB LQAF23, LQAF31, AF11, AF12, AF13, (Overbooking LQAF32, LQAF33, on Hub Node B Enumeration AF21, AF22, AF23, LQAF41, LQAF42, AF31, AF32, AF33, Transmission) Type LQAF43, LQEF AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, ATM/IP Dual ATM QoS LQAF21, LQAF22, Stack Node B Interval Type 0~100 LQAF31, Introduction on LQAF23, Hub NodeB LQAF32, LQAF33, (Overbooking LQAF41, LQAF42, on Hub Node B Enumeration LQAF43, LQEF, Transmission) Type NULL
CBR, RT_VBR, FALSE, TRUE NRT_VBR, UBR, None BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31,ON OFF, AF32, None AF33, AF41, AF42, AF43, EF, CBR, RT_VBR, LQBE, LQAF11, NRT_VBR, UBR, LQAF12, LQAF13, 0~100 LQAF22, per cent BE, AF11, LQAF21, AF12, AF13, AF21, LQAF23, LQAF31, AF22, AF23, LQAF32, LQAF33, AF31, AF32, LQAF41, LQAF42, AF33, AF41, LQAF43, LQEF None AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, 0~100 LQAF31, None LQAF23, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL None
WRFD050404
0~100
None
WRFD050406
ATM QoS Introduction on Hub NodeB (Overbooking on Hub Node B Transmission) Interval Type
WRFD020701
CS_AMRC_SWITCH, CS_HANDOVER_TO _UTRAN_DEFAULT_ CFG_SWITCH, 0~100 CS_IUUP_V2_SUPP ORT_SWITCH, AMR/WB-AMR CS_ZERO_C_AMR_ Speech Rates CFG_TWO_CODCH_ Control Bit Field Type SWITCH
CS_AMRC_SWIT CH, CS_HANDOVER_ TO_UTRAN_DEF AULT_CFG_SWIT CH, 0~100 CS_IUUP_V2_SU per cent PPORT_SWITCH, CS_ZERO_C_AM R_CFG_TWO_CO DCH_SWITCH None
WRFD010619
Enumeration Type
None
WRFD010619
-100~100
ms
WRFD010619
-100~100
ms
WRFD010619
Enumeration Type
EDCH_TTI_10ms, EDCH_TTI_2ms
WRFD01061019
OFF, ON
OFF, ON
None
None
None Transport Channel Management Transport Channel Management Transport Channel Management
Enumeration Type
ON(ON), OFF(OFF)
ON, OFF
None
WRFD021000
Interval Type 0~16777215 BIT2, BIT4, BIT6, BIT8, BIT12, BIT16, BIT24 BIT2, BIT4, BIT6, BIT8, BIT12, BIT16, BIT24
0~16777215
None
WRFD021000
Enumeration Type
2, 4, 6, 8, 12, 16, 24
bit
WRFD021000
Enumeration Type
2, 4, 6, 8, 12, 16, 24
bit
WRFD040100
Flow Control
30~100
per cent
WRFD040100
WRFD020120
Flow Control Service Steering Interval Type 30~100 and Load Sharing in RRC Connection Setup Steering Interval Type 1~10 Service and Load Sharing in RRC Connection Setup Interval Type 0~100
30~100
per cent
0.01~0.1, step:0.01
per cent
WRFD020120
0~1, step:0.01
per cent
None
None
0, 2, 4, 8, 10, 12, 0,2,4,8,10,12,14,16,1 14, 16, 18, 20, 22, Interval Type 8,20,22,24,26 24, 26 None
Enumeration Type
ON(ON), OFF(OFF)
ON, OFF
None
None
None UE State in LCS Classified Connected Zones(CELLMode DCH, CELLPCH, URAUE State in PCH, CELLConnected FACH) Mode (CELLDCH, CELLPCH, URAUE State in PCH, CELLConnected FACH) Mode (CELLDCH, CELLPCH, URAPCH, CELLFACH)
Enumeration Type
WRFD020804
WRFD010202
VPLCX(VPL cross), VCLCX(VCL cross) D8, D16, D32, D64, D128, D256, D512, D1024, D2k, D3k, D4k, D6k, D8k, D12k, Interval Type 0~4799 D16k, D24k, D32k, D48k, D64k, D96k, D128k, D192k, Enumeration D256k, D384k, Type D512k, D768k D250, D500, D1000, D2000, D4000,D40, D0, D10, D20, D8000, D16000 D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
VPLCX, VCLCX
None
8, 16, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, 0~4799 24k, None 12k, 16k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k byte 250, 500, 1000, 2000, 4000, 8000, 1600020, 40, 60, ms 0, 10, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 ms
WRFD010202
Enumeration Type
WRFD010202
Enumeration Type
Enumeration Type
NOLIMIT, LIMIT
None
None
None
Compound Type
None
Dynamic Channel Configuration Control (DCCC) Interval Type 1~255 Intra RNC Softer Handover Inter RNC Soft Handover Interval Type 0~255 Dynamic Channel Configuration Enumeration Control (DCCC) Type RATE_UP_AND_DO WN_ON_DCH, RATE_UP_ONLY_O N_DCH
1~255
0~255
WRFD021101
WRFD021101
Dynamic Channel Configuration Control (DCCC) Interval Type 1~65535 Dynamic Channel Configuration Control (DCCC) Interval Type 1~1000 Dynamic Channel Configuration Control (DCCC) Interval Type 0~1023 Dynamic Channel Configuration Control (DCCC) Interval Type 0~1023 MOCN Introduction Package
1~65535
WRFD021101
10~10000, step: 10
ms
WRFD021101
0~1023
None
WRFD021101
0~1023
None
WRFD021311
0~3, 255
None
WRFD020501
-35~-10
dB
WRFD020101
Admission Control
-30~30
dB
WRFD050304
IMA for E1T1 or Channelized STM-1/OC-3 on Iub Interface Interval Type 4~255
WRFD040202
0~3600
Conversational QoS Class Streaming QoS Class Interactive QoS Conversational Class QoS Class Background Streaming QoS QoS Class Interval Type 1~5 Class Interactive QoS Class Background QoS Class Interval Type 1~5 DRD Introduction Package
1~5
None
1~5
None
WRFD020400
0~100
per cent
WRFD010802
-4~-2, Step:2
dBm
WRFD010801
-4~-2, step:2
None
WRFD050409
0~186
None
String Type
None
None
None
IP Address Type
None
None
None
IP Address Type
None
None
None
IP Address Type
None
None
None
1~1000
None
None
None
IP Address Type
None
None
None
None
None
None
None
None
None
MON_1(No.1), MON_2(No.2), MON_3(No.3), MON_4(No.4), MON_5(No.5), LOGIC_IP(Logical IP MON_6(No.6), Address), MON_7(No.7), Enumeration IPOA_CLIENT_IP(IP LOGIC_IP, MON_8(No.8), Type OA Client IP Address) IPOA_CLIENT_IP MON_9(No.9), MON_10(No.10), DEFAULTPORT(Defa MON_11(No.11), ult 21 Port), Enumeration MON_12(No.12), CUSTOMPORT(Cust DEFAULTPORT, MON_13(No.13), Type om Port) CUSTOMPORT MON_14(No.14), MON_15(No.15), MON_16(No.16), MON_17(No.17), Interval Type 1~60 1~60 MON_18(No.18), MON_19(No.19), MON_20(No.20), MON_21(No.21), IP Address 0.0.0.0~255.255.2 MON_22(No.22), Type None 55.255 MON_23(No.23), MON_24(No.24), MON_25(No.25), MON_26(No.26), Interval Type 0~63 0~63 MON_27(No.27), MON_28(No.28), MON_29(No.29), SUN(Sunday), Enumeration MON_30(No.30), MON(Monday), Type MON_31(No.31) MON_1~MON_31 TUE(Tuesday), Enumeration Type WED(Wednesday), THU(Thursday), FRI(Friday), SAT(Saturday)
None
None
min
None
None
None
None
None
String Type
None
Dynamic Channel Configuration Enumeration Control (DCCC) Type Intra RNC Softer Handover Inter RNC Soft Enumeration Handover Type
MAY(NodeB chooses UPLINK,combine at whether DOWNLINK NodeB), MUST(Must combine at NodeB), MUST_NOT(Must combine at RNC)
UPLINK, DOWNLINK
None
None
AMR/WB-AMR Admission Speech Rates Control Interval Type 0~100 Control Inter-RAT Handover Based on DL QoS Interval Type 1~6000
None
10~60000, step: 10
ms
WRFD020101
Admission Control
Interval Type 0~100 D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D11, D13, D15, D17, D19 D8, D16, D32, D64, D128, D144, D256, D384
None
WRFD020102
Load Measurement HSDPA in UE State Introduction Connected Package Mode (CELLDCH, CELLPCH, URAUE State in PCH, CELLConnected FACH) Mode (CELLDCH, CELLPCH, URAPCH, CELLFACH)
Enumeration Type
D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D11, D13, D15, D17, D19 None
WRFD010610
Enumeration Type
WRFD010202
Enumeration Type
D8, D16
8, 16
kbit/s
WRFD010202
Enumeration Type
D8, D16 D8, D16, D32, D64, D8, D16, D32, D64, D128, D144, D256, D128, D144, D256, D384 D768, D1024, D384, D1536, D1800, D2048, D3600, D7200, D10100, D13900
8, 16
kbit/s
WRFD021101
Dynamic Channel Configuration Enumeration Control (DCCC) Type Dynamic HSDPA Channel Introduction Enumeration Configuration Package Control (DCCC) Type Inter-RAT Dynamic Handover Channel Based on DL Configuration QoS (DCCC) Interval Type Control Inter-RAT Handover Based on DL QoS
8, 16, 32, 64, 128, 8, 16, 32, 64, 128, 144, 256, 384 kbit/s 144, 256, 384, 768, 1024, 1536, 1800, 2048, 3600, 7200, 10100, 13900 kbit/s
1~6000
10~60000, step: 10
ms
10~60000, step: 10
ms
WRFD020102
Load Measurement
1~32
None
WRFD020101
Admission Control
0~1, step:0.01
per cent
WRFD020101
Admission Control
0~1, step:0.01
per cent
WRFD020302 WRFD020303
Inter Frequency Hard Handover Based on Coverage Inter-RAT Handover SF/2, SF/2, Based on HIGHER_LAYER_SC HIGHER_LAYER_ Coverage Bit Field Type HDL SCHDL None
WRFD020108
0~255
None
WRFD020101
Admission Control
0~1, step:0.01
per cent
WRFD020101
Admission Control
0~1, step:0.01
per cent
WRFD020106
Load Reshuffling
1~10
None
WRFD020106
Load Reshuffling
1~10
None
WRFD020106
Load Reshuffling
1~10
None
WRFD020106
Load Reshuffling
Interval Type 1~10 D8, D16, D32, D64, D128, D144, D256, D384 D8, D16, D32, D64, D128, D144, D256, D384
1~10
None
WRFD021101
Dynamic Channel Configuration Enumeration Control (DCCC) Type Dynamic Channel Configuration Enumeration Control (DCCC) Type Traffic Priority Mapping on Transport
WRFD021101
WRFD050424
Enumeration Type
D0, D8, D16, D32, SF4(SF4), SF8(SF8), 0, 8, 16, 32, 64, D64, D128, D144, 128, 144, 256, SF16(SF16), D256, D384 384 SF32(SF32), SF64(SF64), SF128(SF128), SF256(SF256), SFOFF(SFOFF) SF4, SF8, SF16, SF32, SF64, SF128, SF256, SFOFF
kbit/s
WRFD020101
Admission Control
Enumeration Type
None
WRFD020101
Admission Control
0~1, step:0.01
per cent
WRFD020101
Admission Control
0~1, step:0.01
per cent
WRFD020101
Admission Control
None
WRFD020106
Load Reshuffling
0~400000
bit/s
WRFD020106
Load Reshuffling
0~1, step:0.01
per cent
WRFD020106
Load Reshuffling
Interval Type
WRFD020102
Load Measurement
Interval Type
WRFD020106
Load Reshuffling
Interval Type
WRFD020106
Load Reshuffling
Interval Type
WRFD020106
Load Reshuffling
Enumeration Type
WRFD020106
Load Reshuffling
Enumeration Type
WRFD020106
Load Reshuffling
Enumeration Type
NoAct(no action), InterFreqLDHO(interfreq load handover), 1~10 1~10 BERateRed(BE traff rate reduction), QoSRenego(uncontro lled real-time traff Qos 1~32 1~32 re-negotiation), CSInterRatShouldBeL DHO(CS domain inter-rat should be load handover), 1~10 1~10 PSInterRatShouldBeL DHO(PS domain inter-rat should be load handover), SF4(SF4), SF8(SF8), NoAct, 1~10 AMRRateRed(AMR 1~10 InterFreqLDHO, SF16(SF16), traff rate reduction), BERateRed, SF32(SF32), MBMSDecPower(MB SF4, SF8, SF16, QoSRenego, SF64(SF64), MS descend power), SF32, SF64, CSInterRatShould SF128(SF128), SF4(SF4), SF8(SF8), BeLDHO, CodeAdj(Code SF256(SF256) SF128, SF256 SF16(SF16), adjust), PSInterRatShould SF32(SF32), CSInterRatShouldNot BeLDHO, SF64(SF64), SF4, SF8, SF16, LDHO(CS domain AMRRateRed, SF128(SF128), not be SF32, SF64, inter-rat should MBMSDecPower, SF256(SF256) SF128, SF256 load handover), CodeAdj, PSInterRatShouldNot CSInterRatShould LDHO(PS domain NotLDHO, inter-rat should not be PSInterRatShould load handover) NotLDHO
None
None
None
None
None
None
None
WRFD020106
Load Reshuffling
WRFD020106
Load Reshuffling
WRFD020106
Load Reshuffling
WRFD020106
Load Reshuffling
WRFD020106
Load Reshuffling
WRFD020106
Load Reshuffling
WRFD020106
Load Reshuffling
WRFD020106
Load Reshuffling
WRFD020106
Load Reshuffling
WRFD020106
Load Reshuffling
WRFD020106
Load Reshuffling
WRFD020106
Load Reshuffling
InterFreqLDHO(inter- CSInterRatShould inter-rat should be MS descend power), DHO(CS handover), freq handover), load load domain CodeAdj(Code be inter-rat should traff BeLDHO, BERateRed(BE PSInterRatShouldBeL PSInterRatShould adjust), action), NoAct(no load reduction), rate handover), DHO(PS domaintraff CSInterRatShouldNot BeLDHO, BERateRed(BE PSInterRatShouldBeL QoSRenego(uncontro AMRRateRed, inter-rat should be LDHO(CS domain rate real-time traff DHO(PS domain Qos NoAct, lled reduction), not be MBMSDecPower, load handover), inter-rat should be QoSRenego(uncontro NoAct, inter-rat should re-negotiation), AMRRateRed(AMR BERateRed, loadreal-time traff Qos InterFreqLDHO, lled handover), load rate reduction), CodeAdj, CSInterRatShouldBeL QoSRenego, traff handover), PSInterRatShouldNot BERateRed, re-negotiation), CSInterRatShouldNot CSInterRatShould NoAct(no domain DHO(CS domain MBMSDecPower(MB CSInterRatShould QoSRenego, LDHO(PSaction), CSInterRatShouldBeL NotLDHO, LDHO(CS domain inter-rat should be MS descend power), BeLDHO, Enumeration InterFreqLDHO(inter- PSInterRatShould inter-rat should not be CSInterRatShould DHO(CS handover), inter-rat should not be PSInterRatShould freq handover), load load domain CodeAdj(Code BeLDHO, Type load handover) be inter-rat should load handover), traff NotLDHO BERateRed(BE PSInterRatShouldBeL BeLDHO, adjust), action), PSInterRatShould NoAct(no load reduction), PSInterRatShouldNot SInterRatShouldN rate handover), DHO(PS domaintraff CSInterRatShouldNot BeLDHO, BERateRed(BE PSInterRatShouldBeL otLDHO, LDHO(PS domain QoSRenego(uncontro AMRRateRed, inter-rat should be LDHO(CS domain rate real-time traff Qos PSInterRatShould domain Enumeration DHO(PSshould not be NoAct, inter-rat should lled reduction), not be MBMSDecPower, load handover), inter-rat should be QoSRenego(uncontro NoAct, inter-rat BERateRed, Type load handover) re-negotiation), AMRRateRed(AMR NotLDHO loadreal-time traff Qos InterFreqLDHO, lled handover), load rate reduction), CodeAdj, handover), CSInterRatShouldBeL QoSRenego, traff BERateRed, PSInterRatShouldNot CSInterRatShould re-negotiation), CSInterRatShouldNot CSInterRatShould DHO(CS domain MBMSDecPower(MB NotLDHO, LDHO(PS domain CSInterRatShouldBeL QoSRenego, LDHO(CS domain MS descend power), BeLDHO, Enumeration inter-rat should be be PSInterRatShould inter-rat should not be CSInterRatShould DHO(CS domain inter-rat should not PSInterRatShould load handover), CodeAdj(Code BeLDHO, Type load handover) be NotLDHO inter-rat should load handover), PSInterRatShouldBeL BeLDHO, adjust), PSInterRatShould load handover), PSInterRatShouldNot SInterRatShouldN DHO(PS domain CSInterRatShouldNot BeLDHO, PSInterRatShouldBeL otLDHO, LDHO(PS domain inter-rat should be LDHO(CS domain AMRRateRed, DHO(PS domain Enumeration inter-rat should not be PSInterRatShould load handover),not be NoAct, NoAct, inter-rat should be MBMSDecPower, inter-rat should BERateRed, Type load handover) AMRRateRed(AMR NotLDHO InterFreqLDHO, load handover), load rate reduction), CodeAdj, handover), QoSRenego, traff BERateRed, PSInterRatShouldNot CSInterRatShould CSInterRatShouldNot CSInterRatShould NoAct(no action), MBMSDecPower(MB NotLDHO, QoSRenego, LDHO(PS domain LDHO(CS domain MS descend power), BeLDHO, Enumeration InterFreqLDHO(inter- PSInterRatShould inter-rat should not be CSInterRatShould inter-rat should not be PSInterRatShould freq load handover), BeLDHO, CodeAdj(Code Type load handover) NotLDHO load handover), BERateRed(BE traff BeLDHO, adjust), PSInterRatShould PSInterRatShouldNot SInterRatShouldN rate reduction), CSInterRatShouldNot BeLDHO, LDHO(PS domain QoSRenego(uncontro otLDHO, LDHO(CS domain AMRRateRed, Enumeration inter-rat should not be PSInterRatShould lled real-time traff Qos MBMSDecPower, inter-rat should not be Type load handover) NotLDHO re-negotiation), load handover), CodeAdj, CSInterRatShouldBeL CSInterRatShould PSInterRatShouldNot DHO(CS domain LDHO(PS domain NotLDHO, Enumeration inter-rat should be be PSInterRatShould inter-rat should not load handover), Type load handover) NotLDHO PSInterRatShouldBeL NoAct(no action), DHO(PS domaintraff BERateRed(BE inter-rat should be rate reduction), load handover), NoAct, Interval Type QoSRenego(uncontro 1~10 1~10 AMRRateRed(AMR InterFreqLDHO, lled real-time traff Qos traff rate reduction), BERateRed, re-negotiation), MBMSDecPower(MB QoSRenego, CSInterRatShouldBeL MS descend power), CSInterRatShould DHO(CS domain CodeAdj(Code BeLDHO, Interval Type 1~10 should be 1~10 inter-rat adjust), PSInterRatShould load handover), CSInterRatShouldNot BeLDHO, PSInterRatShouldBeL LDHO(CS domain AMRRateRed, DHO(PS domain NoAct, inter-rat should not be MBMSDecPower, BERateRed, Interval Type inter-rat should be 0~100 0~1, step:0.01 load handover), CodeAdj, load handover), QoSRenego, PSInterRatShouldNot CSInterRatShould CSInterRatShouldNot CSInterRatShould LDHO(PS domain NotLDHO, LDHO(CS domain BeLDHO, Enumeration inter-rat should not be PSInterRatShould inter-rat should not be PSInterRatShould Type load handover) NotLDHO load handover), BeLDHO, PSInterRatShouldNot SInterRatShouldN LDHO(PS domain otLDHO, Enumeration inter-rat should not be PSInterRatShould Type load handover) NotLDHO
None
None
None
None
None
None
None
None
None
per cent
None
None
WRFD020106
Load Reshuffling
Enumeration Type
WRFD020106
Load Reshuffling
Enumeration Type
WRFD020106
Load Reshuffling
Enumeration Type
WRFD020106
Load Reshuffling
Enumeration Type
WRFD020106
Load Reshuffling
Enumeration Type
WRFD020106
Load Reshuffling
Enumeration Type
InterFreqLDHO(inter- CSInterRatShould rate real-time traff Qos MS descend power), NoAct, lled reduction), load load handover), freq handover), QoSRenego(uncontro BeLDHO, CodeAdj(Code re-negotiation), traff AMRRateRed(AMR InterFreqLDHO, BERateRed(BE lled real-time traff Qos PSInterRatShould adjust), reduction), BERateRed, CSInterRatShouldBeL traff rate rate reduction), re-negotiation), CSInterRatShouldNot BeLDHO, DHO(CS domain MBMSDecPower(MB QoSRenego, QoSRenego(uncontro CSInterRatShouldBeL AMRRateRed, LDHO(CS domain inter-rat should beQos MS descend power), CSInterRatShould lled real-time traff be MBMSDecPower, DHO(CS domain inter-rat should not load handover), CodeAdj(Code be BeLDHO, re-negotiation), inter-rat should load handover), PSInterRatShouldBeL CodeAdj, adjust), CSInterRatShouldBeL PSInterRatShould load handover), PSInterRatShouldNot CSInterRatShould DHO(PS domain CSInterRatShouldNot BeLDHO, DHO(CS domain PSInterRatShouldBeL NotLDHO, LDHO(PS domain inter-rat should be LDHO(CS domain AMRRateRed, inter-rat domain DHO(PSshould be NoAct, inter-rat should not be PSInterRatShould load handover), NoAct, inter-rat should not be MBMSDecPower, load handover),be inter-rat should BERateRed, load handover) AMRRateRed(AMR NotLDHO load handover), PSInterRatShouldBeL InterFreqLDHO, load rate reduction), CodeAdj, handover), QoSRenego, NoAct(no action), traff PSInterRatShouldNot CSInterRatShould DHO(PS domaintraff BERateRed, CSInterRatShouldNot CSInterRatShould BERateRed(BE MBMSDecPower(MB QoSRenego, LDHO(PS domain NotLDHO, inter-rat should be LDHO(CS domain rate reduction), not be CSInterRatShould MS descend power), BeLDHO, inter-rat should not be PSInterRatShould load handover), NoAct, inter-rat should QoSRenego(uncontro PSInterRatShould CodeAdj(Code BeLDHO, load handover) AMRRateRed(AMR NotLDHO loadreal-time traff Qos InterFreqLDHO, handover), lled adjust), reduction), BeLDHO, PSInterRatShould traff rate BERateRed, PSInterRatShouldNot SInterRatShouldN re-negotiation), CSInterRatShouldNot BeLDHO, MBMSDecPower(MB otLDHO, LDHO(PS domain CSInterRatShouldBeL QoSRenego, LDHO(CS domain MS descend power), AMRRateRed, CSInterRatShould inter-rat should not be PSInterRatShould DHO(CS domain inter-rat should not be MBMSDecPower, CodeAdj(Code BeLDHO, load handover) be NotLDHO inter-rat should load handover), CodeAdj, adjust), PSInterRatShould load handover), PSInterRatShouldNot CSInterRatShould CSInterRatShouldNot BeLDHO, PSInterRatShouldBeL NotLDHO, LDHO(PS domain LDHO(CS domain AMRRateRed, DHO(PS domain NoAct, inter-rat should not be PSInterRatShould inter-rat should not be MBMSDecPower, inter-rat should BERateRed, load handover) be NotLDHO load handover), CodeAdj, load handover), QoSRenego, PSInterRatShouldNot CSInterRatShould CSInterRatShouldNot CSInterRatShould LDHO(PS domain NotLDHO, LDHO(CS domain BeLDHO, inter-rat should not be PSInterRatShould inter-rat should not be PSInterRatShould load handover) NotLDHO load handover), BeLDHO, PSInterRatShouldNot SInterRatShouldN LDHO(PS domain otLDHO, inter-rat should not be PSInterRatShould load handover) NotLDHO
None
None
None
None
None
None
WRFD020106
Load Reshuffling
0~1, step:0.01
per cent
WRFD020102
Load Measurement Interval Type 10~600000 3.4/6.8/13.6/27. 2 kbit/s RRC Connection and RAB Enumeration Assignment Type Dynamic Channel Admission Configuration Control (DCCC) Interval Type Control Inter-RAT Handover Based on DL Enumeration QoS Type Dynamic Channel Configuration Enumeration Control (DCCC) Type
10~600000
ms
WRFD010510
D16, D32, D48, D64, 16, 32, 48, 64, 96, D96, D128, D256, 128, 256, 512, D512, D1024 1024 None
0~100
0~1, step:0.01
per cent
D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, 0, 1, 2, 3, 4, 5, 6, D11, D13, D15, D17, 7, 8, 9, 11, 13, 15, D19 17, 19 None
WRFD021101
AUTO_CALC, HAND_APPOINT
0, 1
None
WRFD021101
D16, D32, D64, D128, 16, 32, 64, 128, D144, D256, D384 144, 256, 384
kbit/s
WRFD020701
AMR/WB-AMR Speech Rates Control Interval Type 1~4294967295 AMR/WB-AMR Speech Rates Control Interval Type 1~4294967295
1~4294967295
ms
WRFD020701
1~4294967295
ms
WRFD020101
Admission Control
None
WRFD020102
Load Measurement
1~32
None
WRFD020107
Overload Control
1~10
None
WRFD020107
Overload Control
Interval Type 0~100 D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D11, D13, D15, D17, D19
0~100
None
WRFD020102
Load Measurement
Enumeration Type
D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D11, D13, D15, D17, D19 None
WRFD020107
Overload Control
0~1, step:0.01
per cent
WRFD020107
Overload Control
0~10
None
WRFD020102
Load Measurement
WRFD020107
Overload Control
0~1, step:0.01
per cent
WRFD020101
Admission Control
0~1, step:0.01
per cent
WRFD020108
SF4, SF8, SF16, SF4, SF8, SF16, SF32, SF64, SF128, SF32, SF64, SF256 SF128, SF256
None
WRFD020106
Load Reshuffling
1~10
None
WRFD020106
Load Reshuffling
1~10
None
WRFD020106
Load Reshuffling
1~10
None
WRFD020106
Load Reshuffling
1~10
None
AMR/WB-AMR AMR/WB-AMR Speech Rates Enumeration Speech Rates Control Type Control Inter-RAT Handover Based on DL QoS Enumeration Type
NO, YES
NO, YES
None
NO, YES
NO, YES
None
Inter-RAT Inter Frequency Handover Hard Handover Based on DL Enumeration Based on DL QoS Type QoS Inter-RAT Handover Based on DL QoS
NO, YES
NO, YES
None
0~512
WRFD020304
Inter Frequency Hard Handover Based on DL Enumeration QoS Type AMR/WB-AMR Speech Rates Enumeration Control Type
NO, YES
NO, YES
None
WRFD020701
NO, YES
NO, YES
None
WRFD020701 WRFD020304
AMR/WB-AMR Speech Rates Control Inter Frequency Hard Handover Based on DL Enumeration QoS Type Inter-RAT Handover Based on DL Enumeration QoS Overbooking on Type IP Transmission Overbooking on ATM Enumeration Transmission Type Dynamic Channel Configuration Enumeration Control (DCCC) Type Dynamic Inter Frequency Channel Hard Handover Configuration Enumeration Based on DL Control (DCCC) Type QoS Inter-RAT Handover Based on DL QoS
NO, YES
NO, YES
None
OFF(The switch of DL NO, YES NO, YES R99 congestion control is off), ON(The switch of DL R99 congestion control is on) OFF, ON
None
None
WRFD021101
2_Rates, 3_Rates
2_Rates, 3_Rates
D4(SF4), D8(SF8), D16(SF16), Interval Type -15~15 D32(SF32), D64(SF64), Inter Frequency D128(SF128), Hard Handover Code Resource Enumeration D256(SF256), Based on Management Type D512(SF512) Coverage Inter-RAT Inter-RAT Handover Handover Based on Enumeration FALSE(Not Limited), Based on Coverage Type TRUE(Limited) Coverage Inter Frequency Hard Handover Based on Enumeration Coverage Type D8, D16, D32, D64, D128, D256
dB
None
FALSE, TRUE
None
WRFD020101
Admission Control
None
WRFD020101
Interval Type 0~100 D8, D16, D32, D64, D128, D144, D256, D384
None
WRFD010610
Enumeration Type
WRFD020701
AMR/WB-AMR Speech Rates Control Interval Type 0~559 AMR/WB-AMR Speech Rates Control Interval Type 0~559 AMR/WB-AMR Speech Rates Control Interval Type 0~559 AMR/WB-AMR Speech Rates Control Interval Type 0~559 AMR/WB-AMR Speech Rates Control Interval Type 1~560 AMR/WB-AMR Speech Rates Control Interval Type 1~560 AMR/WB-AMR Speech Rates Control Interval Type 1~560 AMR/WB-AMR Speech Rates Control Interval Type 1~560
dB
WRFD020701
dB
WRFD020701
dB
WRFD020701
dB
WRFD020701
dB
WRFD020701
dB
WRFD020701
dB
WRFD020701
dB
WRFD020101
Admission Control
1~200
None
WRFD020304
Inter Frequency Hard Handover Based on DL QoS Interval Type 1~6000 IMA for E1T1 or Channelized STM-1/OC-3 on Iub Interface Interval Type 3~505 Domain Specific Access Control Enumeration (DSAC) Type
10~60000, step: 10
ms
WRFD050304
3~505
None
WRFD020114
None
Enumeration Type
CLOSE(Close), OPEN(Open)
CLOSE, OPEN
None
WRFD050301
WRFD010686
Enumeration Type
D1, D2, D5
1, 2, 5
None
CPC - DTX / HSDPA DRX Introduction Package HSUPA Introduction Package ATM Transmission Introduction Package
Enumeration Type
D1, D2, D5
1, 2, 5
None
Enumeration Type
SLOT_FORMAT_1, SLOT_FORMAT_4
WRFD050301
String Type
None
1~11 characters
None
WRFD020203
Enumeration Type
WRFD010684
22 MIMO
Enumeration Type
WRFD020203
Enumeration Type
WRFD022000
Enumeration Type
WRFD020504
Enumeration Type
WRFD050301
Enumeration Type
None, STTD, CP1 None, STTD, CP1 None SINGLE_TPC, IUCS(IUCS), SINGLE_TPC, TPC_TRIPLET_IN IUPS(IUPS), TPC_TRIPLET_IN_S _SOFT, IUR(IUR), OFT, IUCS_RANAP(IUCS_ TPC_AUTO_ADJ TPC_AUTO_ADJUST UST IUPS, IUR, None RANAP), IUCS, IUCS_ALCAP(IUCS_ IUCS_RANAP, ALCAP), IUCS_ALCAP, AAL2SWITCH(AAL2S STP, WITCH), STP(STP) AAL2SWITCH None
None
None
Interval Type
None
None
Interval Type
WRFD010101
3GPP Specifications
Interval Type
3GPP Dynamic Specifications Interval Type Channel Configuration Control (DCCC) 3GPP DCCC HSUPA Specifications Interval Type HSDPA State Transition HSUPA 2ms/10ms TTI Handover Bit Field Type
DRA_BE_EDCH_ TTI_RECFG_SWI TCH, DRA_BE_RATE_ DRA_AQM_SWITCH, DOWN_BF_HO_S DRA_BE_EDCH_TTI WITCH, _RECFG_SWITCH, DRA_DCCC_SWI DRA_BE_RATE_DO TCH, WN_BF_HO_SWITC DRA_HSDPA_DL H, _FLOW_CONTRO 1024~3584 None DRA_DCCC_SWITC 1024~3584 L_SWITCH, H, DRA_HSDPA_ST DRA_HSDPA_DL_FL ATE_TRANS_SWI OW_CONTROL_SWI TCH, TCH, DRA_HSUPA_DC None 0~5,8~27 0~5, 8~27 DRA_HSDPA_STAT CC_SWITCH, E_TRANS_SWITCH, DRA_HSUPA_ST DRA_HSUPA_DCCC ATE_TRANS_SWI _SWITCH, TCH, 0~186 DRA_HSUPA_STAT 0~186 DRA_IU_QOS_R None E_TRANS_SWITCH, ENEG_SWITCH, DRA_IU_QOS_RENE DRA_PS_BE_ST G_SWITCH, ATE_TRANS_SWI DRA_PS_BE_STATE 0~186 TCH, 0~186 None _TRANS_SWITCH, DRA_PS_NON_B DRA_PS_NON_BE_ E_STATE_TRAN STATE_TRANS_SWI S_SWITCH, TCH, DRA_R99_DL_FL 0~186 DRA_R99_DL_FLOW 0~186 OW_CONTROL_ None _CONTROL_SWITC SWITCH, H, DRA_THROUGH DRA_THROUGHPUT PUT_DCCC_SWI _DCCC_SWITCH TCH None
WRFD02040001
-24~0
dB
WRFD020400
-24~0
dB
WRFD010101
3GPP Specifications
1~10000
ms
WRFD010101
3GPP Specifications
1~10000
ms
WRFD02040002
0~5
None
WRFD02040002
0~5
None
WRFD021101 WRFD020309
Dynamic Channel Configuration Control (DCCC) Inter-RAT Handover Based on DL Enumeration QoS Type
NO, YES
NO, YES
None
None
None
10~150
ms
None
None
10~150
ms
None
None
10~150
ms
None
None
10~150
ms
None
None
10~150
ms
None
None
WRFD01061112
HSDPA DRD
DR_RRC_DRD_SWI Interval Type 10~150 TCH, DR_RAB_SING_DRD _SWITCH, DR_RAB_COMB_DR Bit Field Type D_SWITCH
WRFD010686
Enumeration Type
WRFD010401
6~9
None
WRFD010686
3~9
None
WRFD010686
Enumeration Type
TRUE, FALSE
TRUE, FALSE
None
WRFD010686
Enumeration Type
ON, OFF
ON, OFF
None
None
None
None
None
0~31(PEUa), 0~125(E1 of 0~335 0~167(T1 None POUa), of POUa), 0~251(E1 of POUc), 0~335(T1 of POUc) None
WRFD020114
OFF, ON
OFF, ON
None
WRFD050402
0~63
None
None
None
0~63
None
None
None
0~63
None
0~21
None
None
None
0~27
None
Enumeration Type
NO(NO), YES(YES)
YES, NO
None
None
None
IP Address Type
None
None
None
IP Address Type
None
None
None
None
None
TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS1, TS2, TS3, TS4, TS12, TS13, TS5, TS6, TS7, TS8, TS14, TS15, TS9, TS10, TS11, TS16, TS17, TS12, TS13, TS14, TS18, TS19, TS15, TS16, TS17, TS20, TS21, Interval Type 0~335 TS19, TS20, 0~335 TS23, TS18, TS22, TS21, TS22, TS23, TS24, TS25, TS24, TS25, TS26, TS26, TS27, TS27, TS28, TS29, TS28, TS29, Bit Field Type TS30, TS31 TS30, TS31
None
None
WRFD010686
Enumeration Type
None
WRFD010686
Enumeration Type
D4, D5, D8, D10, D16, D20, D32, D40, 4, 5, 8, 10, 16, 20, D64, D80, D128, 32, 40, 64, 80, D160 128, 160 None
WRFD010686
Enumeration Type
D0, D1, D2, D4, D8, 0, 1, 2, 4, 8, 16, D16, D32, D64, D128 32, 64, 128
frame
WRFD010686
Enumeration Type
2, 4, 15
slot
WRFD010686
Enumeration Type
ON, OFF
ON, OFF
None
WRFD020117
Multi-Carrier Switch off Based on Traffic Load Interval Type 1~3600 Multi-Carrier Switch off Based on Traffic Load Interval Type 60~3600 Multi-Carrier Switch off Based on Traffic Enumeration Load Type Multi-Carrier Switch off Based on Traffic Enumeration Load Type Multi-Carrier Switch off Based on Traffic Enumeration Load Type
1~3600
WRFD020117
60~3600
WRFD020117
OFF, ON
None
WRFD020117
OFF(switch off), ON_1(switch on1), ON_2(switch on2), OFF, ON_1, ON_3(switch on3) FORCESHUTDOWN( ON_2, ON_3 ForceShutDown), CONDITIONALSHUT DOWN(ConditionalSh utDown)
None
WRFD020117
WRFD050302
Fractional ATM Function on Iub Interface Interval Type 0~335 ATM over Channelized STM-1/OC-3 on Iub Interface Interval Type 0~83 UE State in Connected HSUPA DCCC Mode (CELLDCH, CELLPCH, URAPCH, CELLFACH) UE State in Connected HSUPA DCCC Mode (CELLDCH, CELLPCH, URAPCH, CELLFACH) HSUPA Introduction Package
0~31(AEUa), 0~335(AOUc)
None
WRFD05030102
0~83
None
WRFD01061208
10~100000, step: 10 ms
WRFD010202
0~1023
None
WRFD01061208
0~384
kbit/s
WRFD010202
0~1023
None
WRFD010612
1~8
None
WRFD050402
None
WRFD010688
Enhanced CELL-FACH
dB
WRFD010688
Enhanced CELL-FACH 3.4/6.8/13.6/27. Interval Type 1~1000 2 kbit/s RRC Connection and RAB Assignment 3.4/6.8/13.6/27. Interval Type 0~65535 2 kbit/s RRC Connection and RAB Assignment Interval Type 0~65535
10~10000, step: 10
ms
WRFD010510
0~65535
ms
WRFD010510
0~65535
ms
WRFD010688
Enhanced CELL-FACH
dB
WRFD010688
Enhanced CELL-FACH 3.4/6.8/13.6/27. Interval Type 0~5000 2 kbit/s RRC Connection and RAB Assignment 3.4/6.8/13.6/27. Interval Type 0~49 2 kbit/s RRC Connection and RAB Assignment Interval Type 0~49
dB
WRFD010510
-24.5~0, step:0.5
dB
WRFD010510
1~2147483646
None
None
None
Compound Type
2000-1-1~203712-31
None
Compound Type
2000-1-1~203712-31
None
Compound Type
2000-1-1~203712-31
None
Configuration MRFD-210301 Management HSUPA Introduction Package HSUPA Introduction Package HSUPA Introduction Package
1~31
WRFD010612
1~5000
bit
WRFD010612
1~5000
bit
WRFD010612
1~5000
bit
WRFD010612
HSUPA Introduction Package HSUPA Introduction Package HSUPA Introduction Package HSUPA Introduction Package HSUPA Introduction Package HSUPA Introduction Package HSUPA Introduction Package HSUPA Introduction Package HSUPA Introduction Package HSUPA Introduction Package
1~5000
bit
WRFD010612
1~5000
bit
WRFD010612
1~5000
bit
WRFD010612
1~5000
bit
WRFD010612
1~5000
bit
WRFD010612
1~5000
bit
WRFD010612
1~5000
bit
WRFD010612
1~5000
bit
WRFD010612
1~5000
bit
WRFD010612
Enumeration Type
D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, 1, 2, 3, 4, 5, 6, 7, D11, D12 8, 9, 10, 11, 12
None
WRFD01061208
HSUPA DCCC
0~1023
None
WRFD01061208
HSUPA DCCC
0~1023
None
WRFD01061208
HSUPA DCCC
RATE_32KBPS, RATE_64KBPS, RATE_128KBPS, RATE_144KBPS, RATE_256KBPS, RATE_384KBPS, RATE_608KBPS, RATE_1440KBPS, RATE_2048KBPS, RATE_2880KBPS, Bit Field Type RATE_5740KBPS
8, 16, 32, 64, 128, 144, 256, 384, 608, 1440, 2048, 2880, 5740 None
WRFD01061203
dB
WRFD01061203
WRFD01061203
WRFD01061208
HSUPA DCCC
0~1023
None
WRFD01061208
HSUPA DCCC
0~1023
None
WRFD010612
EDCH_10MS, EDCH_2MS
EDCH_10MS, EDCH_2MS
None
WRFD050406
0~100
per cent
WRFD010688
Enhanced CELL-FACH
-35~15, step:0.1
dB
WRFD010688
Enhanced CELL-FACH Inter-RAT Handover Enhanced Based on CELL-FACH Coverage Inter Frequency Hard Handover Based on Coverage
Enumeration Type
TRUE, FALSE
TRUE, FALSE
None
Enumeration Type
OFF, ON
OFF, ON
None
Enumeration Type
FALSE(Forbidden), TRUE(Permit)
FALSE, TRUE
None
Enumeration Type
DATE(Input with date), WEEK(Input with week), DATEWEEK(Input with date and week)
None
WRFD010505
Enumeration Type
WRFD050301
Enumeration Type
WRFD021104
None
None
Enumeration Type
OFF, ON ERR_PFM_5E6(OCC OFF, ON UR:5E-6), ERR_PFM_1E5(OCC UR:1E-5), ERR_PFM_5E5(OCC OFF(OFF), ON(ON) OFF, ON UR:5E-5), ERR_PFM_1E4(OCC UR:1E-4), ERR_PFM_5E6, JAN(January), ERR_PFM_5E4(OCC ERR_PFM_1E5, FEB(February), OFF, ON OFF, ON UR:5E-4), ERR_PFM_5E5, MAR(March), ERR_PFM_1E3(OCC ERR_PFM_1E4, APR(April), UR:1E-3), ERR_PFM_5E4, MAY(May), ERR_PFM_5E3(OCC ERR_PFM_1E3, JUN(June), JUL(July), UR:5E-3) ERR_PFM_5E3 AUG(August), SEP(September), OCT(October), NOV(November), DEC(December) JAN, FEB, MAR, APR, MAY, JUN, JUL, AUG, SEP, OCT, NOV, DEC
None
None
None
None
Enumeration Type
None
None
None
IP Address Type
None
None
Enumeration Type
None AUTO(Automatic), PLAINTEXT(Plain Text), ENCRYPTED(SSL Encrypted) AUTO(Auto), PLAINTEXT(Plain Text), ENCRYPTED(SSL Encrypte)
None
None
None
Enumeration Type
None
WRFD011402
Encryption
For each switch of this parameter, the value can be: ON or OFF. None
1~65535
None
WRFD020117
HOUR, MIN
00:00~23:59
min
WRFD020117
Multi-Carrier Switch off Based on Traffic Compound Load Type Multi-Carrier Switch off Based on Traffic Compound Load Type
HOUR, MIN
00:00~23:59
min
WRFD020117
HOUR, MIN
00:00~23:59
min
None
None
Enumeration Type
None
None
WRFD050409
WRFD050409
WRFD010612
None
None
M3UA_ASP~0|| DISABLED(Prohibit to (M3UA_ASP)$$ Enumeration Use), DISABLED, (M3UA_ASP)** Type ENABLED(Available) ENABLED M3UA_IPSP(M3UA_ ASP)** M3UA_IPSP~2|| M3UA_SGP(M3UA Enumeration (M3UA_IPSP)$$ M3UA_ASP, SGP), Type (M3UA_IPSP) M3UA_IPSP(M3UA M3UA_IPSP O1E3_R5E4(OCCUR IPSP), M3UA_SGP, :1E-3, M3UA_SS7SP(M3UA M3UA_IPSP, RECOVERY:5E-4), Enumeration SS7SP), O5E4_R1E4(OCCUR M3UA_SS7SP, Type M3UA_SP(M3UA SP) M3UA_SP :5E-4, RECOVERY:1E-4), O1E4_R5E5(OCCUR :1E-4, Interval Type RECOVERY:5E-5), 1~4294967295 1~4294967295 O5E5_R1E5(OCCUR :5E-5, RECOVERY:1E-5), O1E5_R5E6(OCCUR O1E3_R5E4, Interval Type 1~8 1~8 :1E-5, O5E4_R1E4, RECOVERY:5E-6), O1E4_R5E5, O5E6_R1E6(OCCUR O5E5_R1E5, Enumeration :5E-6, O1E5_R5E6, Type RECOVERY:1E-6) O5E6_R1E6
None
None
None
None
None
None
None
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None
1~2147483646
None
WRFD05030104
5000~30000
ms
WRFD05030104
5000~30000
ms
Compound Type
Compound Type
None
None
None
Compound Type
hour, min
00:00~23:59
None
None
None
Enumeration Type
ONE_BY_ONE(Exec ute One by One), PARALLEL(Parallel ONE_BY_ONE, Execute) PARALLEL 2000-1-1 00:00:00~203712-31 23:59:59
None
Compound Type
None
Compound Type
00:00:00~23:59:5 9 None
Compound Type
00:00:00~23:59:5 9 None
Compound Type
Enumeration Type
Compound Type
WRFD021101
LOGINEVENT(Login Event), MANAGEEVENT(Ma 2000-1-1~2037year, month, day 12-31 nagement Event), AUTHEVENT(Authent LOGINEVENT, ication Event), MANAGEEVENT, OTHEREVENT(Other AUTHEVENT, Event) OTHEREVENT D16, D32, D64, D128, D256, D512, D1024, 16, 32, 64, 128, D2K, D3K, D4K, D6K, 256, 512, 1024, 00:00:00~23:59:5 D8K, D12K, D16K, 2K, 3K, 4K, 6K, hour, min, secD48K, 9 12K, 16K, D24K, D32K, 8K, D64K, D96K, D128K, 24K, 32K, 48K, D192K, D256K, 64K, 96K, 128K, D384K, D512K, 192K, 256K, D768K 384K, 512K, 768K
None
None
None
byte
WRFD021101
D8, D16, D32, D64, D128, D256, D512, D1024, D2K, D3K, D4K, D6K, D8K, D12K, D16K, D24K, D32K, D48K, D64K, D96K, D128K, D192K, D256K, D384K, D512K
8, 16, 32, 64, 128, 256, 512, 1024, 2K, 3K, 4K, 6K, 8K, 12K, 16K, 24K, 32K, 48K, 64K, 96K, 128K, 192K, 256K, 384K, 512K byte
WRFD040100
Flow Control
0~100, step: 10
ms
WRFD040100
Flow Control
Interval Type 0~1000 SUN(Sunday), MON(Monday), Interval Type 0~1000 TUE(Tuesday), WED(Wednesday), THU(Thursday), Enumeration FRI(Friday), Type SAT(Saturday) FIRST(First), Enumeration Type SECOND(Second), THIRD(Third), FOURTH(Fourth), LAST(Last)
per cent
WRFD040100
Flow Control
per cent
SUN, MON, TUE, WED, THU, FRI, SAT None FIRST, SECOND, THIRD, FOURTH, LAST None
String Type
None
1~9 characters
V or A
String Type
None
1~9 characters
V or A
Enumeration Type
VOLTAGE(Voltage), CURRENT(Current)
VOLTAGE, CURRENT
None
String Type
None
1~9 characters
V or A
String Type
None
1~9 characters
V or A
String Type
None
1~9 characters
V or A
String Type
None
1~9 characters
V or A
Enumeration Type
VOLTAGE(Voltage), CURRENT(Current)
VOLTAGE, CURRENT
None
String Type
None
1~9 characters
V or A
String Type
None
1~9 characters
V or A
String Type
None
1~9 characters
V or A
String Type
None
1~9 characters
V or A
Enumeration Type
VOLTAGE(Voltage), CURRENT(Current)
VOLTAGE, CURRENT
None
String Type
None
1~9 characters
V or A
String Type
None
1~9 characters
V or A
String Type
None
1~9 characters
V or A
String Type
None
1~9 characters
V or A
Enumeration Type
VOLTAGE(Voltage), CURRENT(Current)
VOLTAGE, CURRENT
None
Configuration MRFD-210301 Management UE State in Configuration Connected MRFD-210301 Management Mode (CELLDCH, CELLPCH, URAUE State in WRFDPCH, CELLConnected 010202 FACH) Mode (CELLWRFD010202 DCH, CELLPCH, URAPCH, CELLFACH) Transport Channel Management MBMS Introduction Package
String Type
None
1~9 characters
V or A
String Type
None D250, D500, D1000, D2000, D4000,D40, D0, D10, D20, D8000, D16000 D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
1~9 characters
V or A
Enumeration Type
250, 500, 1000, 2000, 4000, 8000, 1600020, 40, 60, ms 0, 10, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 ms
Enumeration Type
WRFD021000
1~32
None
WRFD010616
1~32
None
WRFD020501
dB
WRFD020501
-35~15, step:0.1
dB
WRFD020501
-35~15, step:0.1
dB
WRFD020102
Load Measurement
Enumeration Type
REQUIRE, NOT_REQUIRE
REQUIRE, NOT_REQUIRE
None
WRFD020107
0~3, step:0.1
dB
WRFD020806
0~100
per cent
None
None
0~100
per cent
WRFD021101
Dynamic Channel Configuration Control (DCCC) Interval Type 1~255 PLUS_1(Current FanSpeed Plus 1), MINUS_1(Current FanSpeed Minus 1)
1~255
None
Enumeration Type
PLUS_1, MINUS_1
None
Enumeration Type
HIGH_SPEED, LOW_SPEED
HIGH_SPEED, LOW_SPEED
None
Interval Type 55~100 None CONTINUOUS(Conti 55~100 nuous), DISCRETE(Discrete), CONTINUOUS, NO_SPEED_ADJUS Enumeration DUTY_RATIO(Duty DISCRETE, TMENT(No Speed Type Ratio) DUTY_RATIO None Adjustment), NORMAL_FAN(Norm NO_SPEED_ADJ HW_AUTO_TEMPER al Fan), ATURE_CONTROL(A USTMENT, Enumeration IND_FAN(Independe NORMAL_FAN, uto Temperature HW_AUTO_TEMP Type nt Fan) IND_FAN Control), ERATURE_CONT None SPECIFY_RATE(Spe ROL, cify Rate), SPECIFY_RATE, Enumeration SOFTWARE_CONTR SOFTWARE_CO Type OL(Software Control) NTROL None IND_FAN(Independe nt Fan), NORMAL_FAN(Norm IND_FAN, al Fan) NORMAL_FAN
Enumeration Type
None
None
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None
WRFD050302
Fractional ATM Function on Iub Interface Interval Type 0~1999 IMA for E1T1 or Channelized STM-1/OC-3 on Iub Interface Interval Type 0~1999
0~1999
None
WRFD050304
0~1999
None
None
None
0~1999
None
None
None
0~1999
None
None
None
0~1999
None
None
None
0~1999
None
None
None
0~1999
None
None
None
0~1999
None
None
None
0~1999
None
None
None
10~1999
None
0~1999
None
None
None
Enumeration Type
None
None
Enumeration Type
WRFD040100
Flow Control
Enumeration Type
ON, OFF
ON, OFF
None
WRFD020504
Enumeration Type
0.5, 1, 1.5, 2
dB
WRFD020203
Enumeration Type
None, STTD
None, STTD
None
WRFD010652
Enumeration Type
None, STTD
None, STTD
None
WRFD020203
Enumeration Type
None, STTD
None, STTD
None
WRFD010652
Enumeration Type
None, STTD
None, STTD
None
WRFD010652
-35~15, step:0.1
dB
WRFD010652
-35~15, step:0.1
dB
WRFD020504
dB
WRFD040100
Flow Control
1~1000
None
String Type
None
String Type
None
String Type
None
String Type
None
Enumeration Type
None
Intra RNC Softer Handover Inter RNC Soft Enumeration Handover Type Inter-RAT Handover Based on Coverage
D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, 0, 1, 2, 3, 4, 5, 6, D11, D13, D15, D17, 7, 8, 9, 11, 13, 15, D19 17, 19 None D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, 0, 1, 2, 3, 4, 5, 6, D11, D13, D15, D17, 7, 8, 9, 11, 13, 15, D19 17, 19 None
WRFD020303
Enumeration Type
Security Enumeration MRFD-210305 Management 3.4/6.8/13.6/27. Type WRFD010510 2 kbit/s RRC Connection and MBMS RAB FLC(Frequency Enumeration Assignment Type Layer Convergence)/F LD(Frequency Layer Enumeration Dispersion) Type Fractional ATM Function on Iub Enumeration Interface Type IMA for E1T1 or Channelized STM-1/OC-3 on Enumeration Iub Interface Type
FALSE(Failed), TRUE(Succeeded)
FALSE, TRUE
None
WRFD010626
OFF(OFF), ON(ON)
OFF, ON
None
WRFD050302
OFF(OFF), ON(ON)
OFF, ON
None
WRFD050304
OFF(OFF), ON(ON)
OFF, ON
None
None
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None
None
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None
None
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None
None
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None
None
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None
String Type
None
String Type
None
None
None
String Type
None
String Type
None
String Type
None
Cell ID + RTT Function Based Enumeration LCS FP MUX for IP Type Transmission UDP MUX for Iu-CS Transmission
OFF, ON
OFF, ON
None
1~30
ms
None
None
Interval Type
WRFD050302
Fractional ATM Function on Iub Interface Interval Type Fractional ATM Function on Iub Enumeration Interface Type
WRFD050302
Enumeration Type
None
None
Enumeration Type
WRFD050304
Security Enumeration ATM QoS MRFD-210305 Management Introduction on Type WRFD050406 Hub NodeB (Overbooking on Hub Node B ATM QoS Transmission) Interval Type Introduction on Hub NodeB (Overbooking on Hub Node B Transmission) Interval Type
WRFD050406
LOSSLESSSRNS RELCT, INTERFREQHAR DHNDV, IMPRVEDWNLNK CVRGE, ACRWHENSPUO VER, CBWHENIUIFAUL T, 3G2GCOMMON_ byte 128~1024 128~1024 LOAD, FP_MUX, WBAMR, HSUPA, HSDPA_OVER_I SRNSRWCUPDATE, RANSHARE, UR, LOSSLESSSRNSRE HSDPA3.6M, HS_DPCCH_PRE HSDPA7.2M, 0~31 0~31 LCT, AMBLE_SUPPOR None ONTIME(Fixed Time), ROHC, IURLC, INTERFREQHARDH T, DAILY_T(Day Based NACC, PSHBUG, NDV, HSUPA_2ms_10 Scheduling), IMPRVEDWNLNKCV IMSIBH, ms, FRAATM, DAILY_C(Day Based 32HSDPAUPERC None RGE, HSUPA_5_74MB FRAATM, FRAIMA FRAIMA WBAMR, HSUPA, Duration), ACRWHENSPUOVE ELL, PS, RANSHARE, 64HSDPAUPERC WEEKLY_T(Week R, HSUPA_OVER_I ONTIME(Fixed Time), ELL, HSDPA3.6M, Based Scheduling), ONTIME, CBWHENIUIFAULT, UR, RELATIVE_T(Relativ ONTIME, HSDPA7.2M, ROHC, STMTRAONHSD WEEKLY_C(Week 3G2GCOMMON_LO DAILY_T, HUB_IUB_OVER e Time) NACC, RELATIVE None IURLC,Duration), PA, Based DAILY_C, AD, FP_MUX, BOOKING, PSHBUG, IMSIBH, HSDPASTATETR MONTHLY_T(Month WEEKLY_T, HSDPA_OVER_IUR, IMS_SIGNALING_ 32HSDPAUPERCELL AN, HSDPADRD, Based Scheduling), WEEKLY_C, HS_DPCCH_PREAM OVER_HSPA, , MONTHLY_C(Month ENHANCEDIUFL MONTHLY_T, BLE_SUPPORT, DYN_BANDWIDT 64HSDPAUPERCELL EX, Based Duration) HSUPA_2ms_10ms, MONTHLY_C H_CTROL_IUB_I None , HSUPA_5_74MBPS, STMTRAONHSU P, STMTRAONHSDPA, PA, HSUPA_OVER_IUR, MBMS_OVER_IU HSDPASTATETRAN, PDCP, AMRC, HUB_IUB_OVERBO ATMIPDUALSTA R, D64, D128, TFOTRFO, D32, D64, D128, D32, HSDPADRD, CK, OKING, MBMS_P2P_OVE PDCP, AMRC, D256 D256 ENHANCEDIUFLEX, INDIRECRETRY, None IMS_SIGNALING_OV IPTRANINIUR, R_HSDPA, TFOTRFO, STMTRAONHSUPA, INTERRATDIREC IPTRANINIU, ER_HSPA, MBMS_ENHANC INDIRECRETRY, ATMIPDUALSTACK, RETRY, DYN_BANDWIDTH_ FRACTIONALIP, INTERRATDIRECRE ED_BROADCAST IPTRANINIUR, Type), INTERRATREDIR IPIUBOVERBOOK TXT(Plain Text CTROL_IUB_IP, , TRY, ECT, CBS, IPTRANINIU, CSV(CSV Type) MBMS_OVER_IUR, ING, MBMS_ADMISSI INTERRATREDIREC TXT, CSV CELLID, OTDOA, None FRACTIONALIP, MBMS_P2P_OVER_ FRACTIONALAT ON_ENHANCE, T, CBS, CELLID, IPIUBOVERBOOKIN AGPS, PUC, M, HSDPA, RAN_SHARING_ OTDOA, AGPS, PUC, INTRACELLLDB, G, MBMS_ENHANCED_ ATMOVERBOOKI ENHANCED_PAC INTRACELLLDB, FRACTIONALATM, INTERCELLLDB, NG, BROADCAST, KAGE, INTERCELLLDB, MULTIRAB, HCS, None 0~33 ATMOVERBOOKING 0~33 MBMS_ADMISSION_ IUBHYBRIDIPTR SRB_OVER_HSD MULTIRAB, HCS, RABDOWNSIZIN , AN, ENHANCE, PA, RABDOWNSIZING, G, QCPE, IUBHYBRIDIPTRAN, MBMS8CHANNEL RAN_SHARING_EN INTERSERVICEH SRB_OVER_HSU QCPE, MBMS8CHANNELPE PERCELL, HANCED_PACKAGE PA, INTERSERVICEHO, O, RCELL, 256KBPSCHNLR None 1~33 1~33 , MULTI_FBNM, INTERLOADHO, 256KBPSCHNLRATE INTERLOADHO, SRB_OVER_HSDPA, ATEONMBMS, HSDPA_13_976M IUQOSRENEG, IUQOSRENEG, ONMBMS, SRB_OVER_HSUPA, MBMSFLCFLD, BPS, LCSCZ, HSDPA, LCSCZ, HSDPA, MBMSFLCFLD, VTFTSFIHO, MULTI_FBNM, BFD_ARP_IP, IUFLEX, IUBSC, IUFLEX, IUBSC, VTFTSFIHO, HSDPA_13_976MBP CBIHBUMTSAND None INTER_FHHBDLQ IUBIP, MBMS CBIHBUMTSANDGS IUBIP, MBMS GSMGPRS, S, BFD_ARP_IP, OS, MGPRS, INTER_FHHBDLQOS SRNSRELOCATI INTER_RHBDLQ SRNSRELOCATION, ON, , OS, SRNSRWHHANDOV SRNSRWHHAND INTER_RHBDLQOS, MBMS_16_CHAN ER MBMS_16_CHANNE OVER NELS_PER_CELL None LS_PER_CELL, , 60_HSUPA_USERS_ 60_HSUPA_USE PER_CELL, TPMT, RS_PER_CELL, AQM TPMT, AQM None
DIFF_SERVICE_ON_ , SPI_WEIGHT, HSUPA_ADAPTIV HSUPA_ADAPTIVE_ E_RETRANSMIS RETRANSMISSION, SION, SIMPLE_CELL_BOR SIMPLE_CELL_B ADCAST, ORADCAST, SATELLITE_TRANS_ SATELLITE_TRA ON_IU, NS_ON_IU, IUR_G_NACC, IUR_G_NACC, IUR_G_LBB, IUR_G_LBB, Bit Field Type IUR_G_SDB IUR_G_SDB None
License ATM QoS MRFD-210403 Management Introduction on Bit Field Type IUR_G_HBL WRFD050406 Hub NodeB (Overbooking on Hub Node B ATM QoS Transmission) Interval Type 0~200000 Introduction on Hub NodeB (Overbooking on Hub Node B ATM QoS Transmission) Interval Type 0~200000 Introduction on Hub NodeB (Overbooking on Hub Node B ATM QoS Transmission) Interval Type 0~100 Introduction on Hub NodeB (Overbooking on Hub Node B ATM QoS Transmission) Interval Type 0~100 Introduction on Hub NodeB (Overbooking on Hub Node B ATM QoS Transmission) Interval Type 0~200000 Introduction on Hub NodeB (Overbooking on Hub Node B ATM QoS Transmission) Interval Type 0~100 Introduction on Hub NodeB (Overbooking on Hub Node B ATM QoS Transmission) Interval Type 0~200000 Introduction on Hub NodeB (Overbooking on Hub Node B ATM QoS Transmission) Interval Type 0~100 Introduction on Hub NodeB (Overbooking on Hub Node B ATM QoS Transmission) Interval Type 0~100 Introduction on Hub NodeB (Overbooking on Hub Node B Transmission) Interval Type 0~200000
IUR_G_HBL
None
0~200000
kbit/s
WRFD050406
0~200000
kbit/s
WRFD050406
0~100
per cent
WRFD050406
0~100
per cent
WRFD050406
0~200000
kbit/s
WRFD050406
0~100
per cent
WRFD050406
0~200000
kbit/s
WRFD050406
0~100
per cent
WRFD050406
0~100
per cent
WRFD050406
0~200000
kbit/s
WRFD022000
1~15
None
WRFD022000
0~15
None
Enumeration Type
DEG, SEC
None
WRFD020801
Cell ID + RTT Function Based Enumeration ATM QoS LCS Introduction on Type Hub NodeB (Overbooking on Hub Node B ATM QoS Transmission) Interval Type Introduction on
0, 1
None
WRFD050406
WRFD050406
None
WRFD020701
WRFD020701
NBAMR_BITRATE_4. 75K, 0~100 NBAMR_BITRATE_5. WBAMR_BITRATE_6 15K, Hub NodeB .60K, NBAMR_BITRATE_5. (Overbooking WBAMR_BITRATE_8 90K, on Hub Node B .85K, NBAMR_BITRATE_6. Transmission) Interval Type 0~100 WBAMR_BITRATE_1 OFF(Disable the 70K, 2.65K, golbal route NBAMR_BITRATE_7. WBAMR_BITRATE_1 management), 40K, Enumeration 4.25K, ON(Enable the golbal NBAMR_BITRATE_7. WBAMR_BITRATE_1 None Type route management) 95K, 5.85K, NBAMR_BITRATE_1 WBAMR_BITRATE_1 AMR/WB-AMR 0.20K, 8.25K, Speech Rates Enumeration NBAMR_BITRATE_1 WBAMR_BITRATE_1 Control Type 2.20K 9.85K, WBAMR_BITRATE_2 AMR/WB-AMR 3.05K, Speech Rates Enumeration WBAMR_BITRATE_2 Control Type 3.85K
0~100
per cent
0~100
per cent
None
kbit/s
6.60, 8.85, 12.65, 14.25, 15.85, 18.25, 19.85, 23.05, 23.85 kbit/s
WRFD020106
Load Reshuffling
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None
Configuration ATM QoS MRFD-210301 Management Introduction on Interval Type 1~60 WRFD050406 Hub NodeB (Overbooking on Hub Node B Transmission) Interval Type 0~2047
1~60
min
0~2047
None
WRFD050406
ATM QoS Introduction on Hub NodeB (Overbooking on Hub Node B Enumeration Transmission) Type Inter-RAT Handover Based on Coverage Inter-RAT Handover Based on Coverage
WRFD020303
WRFD020303
None
None
ATM(ATM), IP(IP) ECHOREPLY, UNREACH, SOURCEQUENCH, REDIRECT, ECHO, Interval Type 0~65535 ROUTERADVERT, ROUTERSOLICIT, TIMXCEED, PARAMPROB, String Type None TSTAMP, TSTAMPREPLY, IREQ, IREQREPLY, MASKREQ, Bit Field Type MASKREPLY
ECHOREPLY, UNREACH, ATM, IP SOURCEQUENC None H, REDIRECT, ECHO, ROUTERADVERT , 0~65535 None ROUTERSOLICIT , TIMXCEED, PARAMPROB, TSTAMP, 1~31 characters None TSTAMPREPLY, IREQ, IREQREPLY, MASKREQ, MASKREPLY None
WRFD040100
Flow Control
30~100
per cent
WRFD040100
Flow Control
30~100
per cent
WRFD040100
Flow Control
30~100
per cent
WRFD040100
Flow Control
30~100
per cent
WRFD040100
Flow Control
Enumeration Type
ON, OFF
ON, OFF
None
WRFD021101
1~512
None
WRFD01061010
0~5000
kbit/s
WRFD020203
Enumeration Type
Mode0, Mode1
Mode0, Mode1
None
WRFD01061010
Enumeration Type
WRFD050402
1000~600000
ms
None
None
Enumeration Type
WRFD020108
0~300
WRFD010802
Inter RNC Cell Update HCS (Hierarchical ATM QoS Cell Structure) Introduction on Hub NodeB (Overbooking on Hub Node B ATM QoS Transmission) Introduction on Hub NodeB (Overbooking on Hub Node B Transmission)
WRFD021200
WRFD050406
WRFD050406
WRFD050404
ATM/IP Dual ATM QoS Stack Node B Introduction on Hub NodeB (Overbooking on Hub Node B Transmission)
WRFD050406
Interval Type 0~7 CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, Interval Type 0~7 AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, Interval Type 0~100RT_VBR, CBR, LQAF21, LQAF22, NRT_VBR, UBR, BE, LQAF23, LQAF31, AF11, AF12, AF13, LQAF32, LQAF33, AF21, AF22, AF23, Enumeration LQAF41, LQAF42, AF31, AF32, AF33, Type LQAF43, LQEF AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, Interval Type 0~100 LQAF31, LQAF23, LQAF32, LQAF33, LQAF41, LQAF42, Enumeration LQAF43, LQEF, Type NULL
CBR, RT_VBR, 0~7 NRT_VBR, UBR, None BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, 0~7 AF32, None AF33, AF41, AF42, AF43, EF, CBR, RT_VBR, LQBE, LQAF11, NRT_VBR, UBR, LQAF12, LQAF13, 0~100 LQAF22, per cent BE, AF11, AF12, LQAF21, AF13, AF21, LQAF23, LQAF31, AF22, AF23, LQAF32, LQAF33, AF31, AF32, LQAF41, LQAF42, AF33, AF41, LQAF43, LQEF None AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, 0~100 LQAF31, None LQAF23, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL None
WRFD050404
ATM/IP Dual ATM QoS Stack Node B Interval Type 0~100 Introduction on Hub NodeB (Overbooking on Hub Node B Transmission) Interval Type 0~100
0~100
None
WRFD050406
0~100
per cent
WRFD050406
WRFD050404
ATM/IP Dual ATM QoS Stack Node B Introduction on Hub NodeB (Overbooking on Hub Node B Transmission)
WRFD050406
AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, CBR, RT_VBR, LQAF21, LQAF22, NRT_VBR, UBR, BE, LQAF23, LQAF31, AF11, AF12, AF13, LQAF32, LQAF33, AF21, AF22, AF23, Enumeration LQAF41, LQAF42, AF31, AF32, AF33, Type LQAF43, LQEF AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, Interval Type 0~100 LQAF31, LQAF23, LQAF32, LQAF33, LQAF41, LQAF42, Enumeration LQAF43, LQEF, Type NULL
AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, CBR, RT_VBR, LQBE, LQAF11, NRT_VBR, UBR, LQAF12, LQAF13, BE, AF11, AF12, LQAF21, LQAF22, AF13, AF21, LQAF23, LQAF31, AF22, AF23, LQAF32, LQAF33, AF31, AF32, LQAF41, LQAF42, AF33, AF41, LQAF43, LQEF None AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, 0~100 LQAF31, None LQAF23, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL None
WRFD050404
0~100
None
WRFD050404
WRFD050404
ATM/IP Dual ATM QoS Stack Node B Introduction on Hub NodeB (Overbooking on Hub Node B ATM QoS Transmission) Introduction on Hub NodeB (Overbooking on Hub Node B ATM QoS Transmission) Introduction on Hub NodeB (Overbooking on Hub Node B ATM QoS Transmission) Introduction on Hub NodeB (Overbooking on Hub Node B ATM QoS Transmission) Introduction on Hub NodeB (Overbooking on Hub Node B ATM QoS Transmission) Introduction on Hub NodeB (Overbooking on Hub Node B Transmission)
WRFD050406
WRFD050406
WRFD050406
WRFD050406
WRFD050406
WRFD050406
Interval Type 0~100 CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, Interval Type 0~100RT_VBR, CBR, AF31, AF32, AF33, NRT_VBR, UBR, BE, AF41, AF42, AF43, AF11, AF12, AF13, EF, LQBE, LQAF11, AF21, AF22, AF23, LQAF12, LQAF13, Interval Type AF31, AF32, AF33, 0~100 LQAF22, LQAF21, AF41,RT_VBR, CBR, AF42, AF43, LQAF23, LQAF31, EF, LQBE, LQAF11, NRT_VBR, UBR, BE, LQAF32, LQAF33, LQAF12, LQAF13, AF11, AF12, AF13, Enumeration LQAF41, LQAF42, LQAF21, LQAF22, AF21,RT_VBR, Type LQAF43, LQEF CBR, AF22, AF23, LQAF23, LQAF31, AF31, AF32, AF33, NRT_VBR, UBR, BE, LQAF32, LQAF33, AF41, AF42, AF43, AF11, AF12, AF13, LQAF41, LQAF42, EF, LQBE, LQAF11, Enumeration AF21, AF22, AF23, LQAF43, LQEF, LQAF12, LQAF13, AF31, Type NULL AF32, AF33, LQAF21, LQAF22, AF41,RT_VBR, CBR, AF42, AF43, LQAF23, LQAF31, EF, LQBE, LQAF11, NRT_VBR, UBR, BE, LQAF32, LQAF33, LQAF12, LQAF13, AF11, AF12, AF13, Enumeration LQAF41, LQAF42, LQAF21, LQAF22, AF21, AF22, AF23, Type LQAF43, LQEF LQAF23, LQAF31, AF31, AF32, AF33, LQAF32, LQAF33, AF41, AF42, AF43, LQAF41, LQAF42, EF, LQBE, LQAF11, Enumeration LQAF43, LQEF, LQAF12, LQAF13, Type NULL LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, Enumeration LQAF41, LQAF42, Type LQAF43, LQEF
CBR, RT_VBR, 0~100 NRT_VBR, UBR, None BE, AF11, AF12, AF13,RT_VBR, CBR, AF21, AF22, AF23, NRT_VBR, UBR, AF31, 0~100 AF32, BE, AF11, AF12, None AF33, AF41, AF13, AF21, AF42, AF43, EF, AF22, AF23, LQBE,AF32, LQAF11, AF31,RT_VBR, CBR, LQAF12, LQAF13, AF33, AF41, 0~100 LQAF22, per cent NRT_VBR, UBR, LQAF21, AF42, AF43, EF, BE, AF11, AF12, LQAF23, LQAF31, LQBE,AF21, LQAF11, AF13,RT_VBR, LQAF32, LQAF33, CBR, LQAF12, LQAF13, AF22, AF23, LQAF41, LQAF42, NRT_VBR, UBR, LQAF21, LQAF22, AF31, AF32, LQAF43, LQEF BE, AF11, AF12, LQAF23, LQAF31, None AF33, AF41, AF13, AF21, LQAF32, LQAF33, AF42, AF43, EF, AF22, AF23, LQAF41, LQAF42, LQBE,AF32, LQAF11, AF31,RT_VBR, LQAF43, LQEF, CBR, LQAF12, LQAF13, AF33, NULL AF41, NRT_VBR, UBR, None LQAF21, LQAF22, AF42, AF43, EF, BE, AF11, AF12, LQAF23, LQAF31, LQBE,AF21, AF13, LQAF11, LQAF32, LQAF33, LQAF12, LQAF13, AF22, AF23, LQAF41, LQAF42, LQAF21, LQAF22, AF31, AF32, LQAF43, LQEF LQAF23, LQAF31, None AF33, AF41, LQAF32, LQAF33, AF42, AF43, EF, LQAF41, LQAF42, LQBE, LQAF11, LQAF43, LQEF, LQAF12, LQAF13, NULL LQAF21, LQAF22, None LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF None
WRFD050406
ATM QoS Introduction on Hub NodeB (Overbooking on Hub Node B Enumeration Transmission) Type
AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL None
WRFD050404
0~100
None
WRFD050404
0~100
None
WRFD050404
WRFD050404
ATM/IP Dual ATM QoS Stack Node B Introduction on Hub NodeB (Overbooking on Hub Node B ATM QoS Transmission) Introduction on Hub NodeB (Overbooking on Hub Node B Transmission)
WRFD050406
WRFD050406
WRFD050404
ATM/IP Dual ATM QoS Stack Node B Introduction on Hub NodeB (Overbooking on Hub Node B Transmission)
WRFD050406
WRFD050404
ATM/IP Dual ATM QoS Stack Node B Introduction on Hub NodeB (Overbooking on Hub Node B ATM QoS Transmission) Introduction on Hub NodeB (Overbooking on Hub Node B Transmission)
WRFD050406
WRFD050406
Interval Type 0~100 CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, Interval Type AF21, AF22, AF23, 0~100 AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, Interval Type 0~100RT_VBR, CBR, LQAF21, LQAF22, NRT_VBR, UBR, BE, LQAF23, LQAF31, AF11, AF12, AF13, LQAF32, LQAF33, Enumeration AF21, AF22, AF23, LQAF41, LQAF42, AF31, AF32, AF33, Type LQAF43, LQEF AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, Interval Type 0~100 LQAF31, LQAF23, LQAF32, LQAF33, LQAF41, LQAF42, Enumeration LQAF43, LQEF, Type NULL CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, Interval Type AF21, AF22, AF23, 0~100 AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, Interval Type 0~100 LQAF22, LQAF21, LQAF23, LQAF31, LQAF32, LQAF33, Enumeration LQAF41, LQAF42, Type LQAF43, LQEF
CBR, RT_VBR, 0~100 NRT_VBR, UBR, None BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, 0~100 None AF33, AF41, AF42, AF43, EF, CBR, RT_VBR, LQBE, LQAF11, NRT_VBR, UBR, LQAF12, LQAF13, 0~100 LQAF22, per cent BE, AF11, LQAF21, AF12, AF13, AF21, LQAF23, LQAF31, AF22, AF23, LQAF32, LQAF33, AF31, AF32, LQAF41, LQAF42, AF33, AF41, LQAF43, LQEF None AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, 0~100 LQAF31, None LQAF23, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, CBR, RT_VBR, NULL NRT_VBR, UBR, None BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, 0~100 None AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, 0~100 LQAF22, per cent LQAF21, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF None
WRFD050404
ATM/IP Dual ATM QoS Stack Node B Interval Type Introduction on Hub NodeB (Overbooking on Hub Node B Enumeration Transmission) Type
WRFD050406
WRFD050404
ATM/IP Dual ATM QoS Stack Node B Interval Type Introduction on Hub NodeB (Overbooking on Hub Node B ATM QoS Transmission) Interval Type Introduction on Hub NodeB (Overbooking on Hub Node B Enumeration Transmission) Type
WRFD050406
WRFD050406
WRFD050404
ATM/IP Dual ATM QoS Stack Node B Interval Type Introduction on Hub NodeB (Overbooking on Hub Node B Enumeration Transmission) Type
WRFD050406
WRFD050404
ATM/IP Dual ATM QoS Stack Node B Interval Type Introduction on Hub NodeB (Overbooking on Hub Node B ATM QoS Transmission) Interval Type Introduction on Hub NodeB (Overbooking on Hub Node B Enumeration ATM QoS Transmission) Type Introduction on Hub NodeB (Overbooking on Hub Node B Enumeration Transmission) Type
WRFD050406
WRFD050406
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, 0~100 LQAF31, LQAF23, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, 0~100 AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, 0~100RT_VBR, CBR, LQAF21, LQAF22, NRT_VBR, UBR, BE, LQAF23, LQAF31, AF11, AF12, AF13, LQAF32, LQAF33, AF21, AF22, AF23, LQAF41, LQAF42, AF31, AF32, AF33, LQAF43, LQEF AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, 0~100 LQAF31, LQAF23, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, 0~100RT_VBR, CBR, AF31, AF32, AF33, NRT_VBR, UBR, BE, AF41, AF42, AF43, AF11, AF12, AF13, EF, LQBE, LQAF11, AF21, AF22, AF23, LQAF12, LQAF13, AF31, 0~100 AF32, AF33, LQAF21, LQAF22, AF41, AF42, AF43, LQAF23, LQAF31, EF, LQBE, LQAF11, LQAF32, LQAF33, LQAF12, LQAF13, LQAF41, LQAF42, LQAF21, LQAF22, LQAF43, LQEF LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
WRFD050406
NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, 0~100 LQAF31, None LQAF23, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, CBR, RT_VBR, NULL NRT_VBR, UBR, None BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, 0~100 AF32, None AF33, AF41, AF42, AF43, EF, CBR, RT_VBR, LQBE, LQAF11, NRT_VBR, UBR, LQAF12, LQAF13, 0~100 LQAF22, per cent BE, AF11, AF12, LQAF21, AF13, AF21, LQAF23, LQAF31, AF22, AF23, LQAF32, LQAF33, AF31, AF32, LQAF41, LQAF42, AF33, AF41, LQAF43, LQEF None AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, 0~100 LQAF31, None LQAF23, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, CBR, RT_VBR, NULL NRT_VBR, UBR, None BE, AF11, AF12, AF13,RT_VBR, CBR, AF21, AF22, AF23, NRT_VBR, UBR, AF31, 0~100 AF32, BE, AF11, AF12, None AF33, AF41, AF13, AF21, AF42, AF43, EF, AF22, AF23, LQBE,AF32, AF31, LQAF11, LQAF12, LQAF13, AF33, 0~100 AF41, LQAF21, LQAF22, per cent AF42, AF43, EF, LQAF23, LQAF31, LQBE, LQAF11, LQAF32, LQAF33, LQAF12, LQAF13, LQAF41, LQAF42, LQAF21, LQAF22, LQAF43, LQEF LQAF23, LQAF31, None LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL None
None
None
0~31
None
None WRFD020202 WRFD020203 WRFD010801 WRFDWRFD010802 020201 WRFD020202 WRFDWRFD020302 020203 WRFDWRFD020301 010801 WRFDWRFDWRFD021200 010802 020302 WRFDWRFD020303 020304 WRFDWRFD020309 020301 WRFD020307 WRFD020308 WRFDWRFD02060503 02030801 WRFD02030802 WRFDWRFD040202 020103 WRFD020305 WRFD020306
Inter Frequency Hard Handover Based on SRNS Coverage Relocation with Inter Frequency Hard Handover Bit Field Type Hard Handover Based on DL Intra QoS Node B Softer Handover Enumeration Intra Frequency Intra Handover Hard RNC Softer Type Handover Inter RNC Soft Handover Intra Frequency None Interval Type Hard Handover Intra RNC Softer HCS Handover (Hierarchical InterStructure) Cell RNC Soft Handover Interval Type Inter-RAT Handover Cell Intra RNC Based on Update Coverage Cell Inter RNC Inter-RAT Update Interval Type Handover Inter Frequency Based on DL Hard Handover QoS Based on Video Inter Frequency Interval Type Coverage Telephony Hard Handover Fallback toCell Intra RNC Based on Speech (AMR) Update Coverage for Inter-RAT Inter RNC Cell Inter Frequency HO Update Hard Handover Interval Type PS Inter-RAT Based on DL Handover QoS 2 Phase Intra Frequency NACC(Network Hard Handover Interval Type Assisted Cell Change) SRNS PS Handover Relocation with Between UMTS Cell/URA and GPRS Update Interval Type Inter Frequency Load Balance Inter-RAT RNC Node Enumeration Handover Redundancy Type Based on Service Inter-RAT Handover Based on Load Bit Field Type
Q_HARD_HO_S WITCH, HO_INTER_FRE Q_RPRT_2D2F_S WITCH, HO_ALGO_HCS_SP HO_INTER_RAT_ EED_EST_SWITCH, CS_OUT_SWITC HO_ALGO_LDR_ALL DL_DCCH_SWIT H, OW_SHO_SWITCH, CH, HO_INTER_RAT_ DL_DCCH_SWITCH, IUR_TRG_SWITC HO_ALGO_MBMS_F PS_3G2G_CELL IUR_TRG_SWITCH H LC_SWITCH, CHG_NACC_SWI None HO_ALGO_OVERLA TCH, Y_SWITCH, HO_INTER_RAT_ HO_INTER_FREQ_H PS_3G2G_RELO ARD_HO_SWITCH, OFF, ON CATION_SWITCH None OFF, ON HO_INTER_FREQ_R , PRT_2D2F_SWITCH, HO_INTER_RAT_ HO_INTER_RAT_CS PS_OUT_SWITC _OUT_SWITCH, H, 0~167 0~167 None HO_INTER_RAT_PS HO_INTER_RAT_ _3G2G_CELLCHG_N RNC_SERVICE_ ACC_SWITCH, HO_SWITCH, HO_INTER_RAT_PS HO_INTRA_FRE 1~10000 _3G2G_RELOCATIO 1~10000 Q_DETSET_INTO ms N_SWITCH, _ACTSET_SWITC HO_INTER_RAT_PS H, _OUT_SWITCH, HO_INTRA_FRE HO_INTER_RAT_RN Q_DETSET_RPR ms 1~10000 1~10000 C_SERVICE_HO_S T_SWITCH, WITCH, HO_INTRA_FRE HO_INTRA_FREQ_D Q_HARD_HO_S ETSET_INTO_ACTS WITCH, 0~3 0~3 ET_SWITCH, HO_INTRA_FRE None HO_INTRA_FREQ_D Q_RPRT_1J_SWI ETSET_RPRT_SWIT TCH, CH, HO_INTRA_FRE HO_INTRA_FREQ_H Q_RPRT_6F6G_S ms 1~10000 1~10000 ARD_HO_SWITCH, WITCH, HO_INTRA_FREQ_R HO_INTRA_FRE PRT_1J_SWITCH, Q_SOFT_HO_SW HO_INTRA_FREQ_R ITCH, 1~10000 PRT_6F6G_SWITCH, 1~10000 HO_MC_MEAS_B ms HO_INTRA_FREQ_S EYOND_UE_CAP OFT_HO_SWITCH, _SWITCH, HO_MC_MEAS_BEY HO_MC_NCELL_ OND_UE_CAP_SWIT 1~10000 COMBINE_SWIT ms 1~10000 SINGLEHOST(Single CH, CH, Host), HO_MC_NCELL_CO HO_MC_SIGNAL PRIMHOST(PrimHost SINGLEHOST, MBINE_SWITCH, _IUR_INTRA_SWI ), HO_MC_SIGNAL_IU PRIMHOST, TCH, SECHOST(SecHost) SECHOST R_INTRA_SWITCH, HO_MC_SIGNAL None HO_MC_SIGNAL_S _SWITCH, WITCH, HO_MC_SNA_RE HO_MC_SNA_REST STRICTION_SWI RICTION_SWITCH TCH None
WRFD020302
-24~0
dB
Inter Frequency Hard Handover Inter Frequency Based on Hard Handover Coverage Based on Inter Frequency Coverage Hard Handover Interval Type -115~-25 Based on DL QoS Intra Frequency Hard Handover Interval Type 1~10000
-115~-25
dB
1~10000
ms
None
None
0~7
None
WRFD020101
Admission Control
None
Inter-RAT Handover Admission Based on Control Interval Type 0~100 Coverage Inter Frequency Hard Handover Based on Enumeration FALSE(Forbidden), Coverage Type TRUE(Permit)
0~1, step:0.01
per cent
FALSE, TRUE
None
WRFD020101
Admission Control
None
WRFD020101
Admission Control
None
WRFD020102
Load Measurement
1~32
None
WRFD020102
Load Measurement Interval Type 1~32 3.4/6.8/13.6/27. 2 kbit/s RRC Connection and RAB Assignment 3.4/6.8/13.6/27. Interval Type 0~65534 2 kbit/s RRC Connection and RAB Assignment Interval Type 0~100
1~32
None
WRFD010510
0~65534
None
WRFD010510
0~100
per cent
WRFD020101
Admission Control
None
WRFD020101
Admission Control
0~1, step:0.01
per cent
0~8040000
kbit/s
WRFD020117
Multi-Carrier Switch off Based on Traffic Load Interval Type 0~5 HSDPA Introduction Package HSDPA Introduction Package HSDPA Introduction Package HSDPA Introduction Package HSDPA Introduction Package HSDPA Introduction Package HSDPA Introduction Package HSDPA Introduction Package
0~5
None
WRFD010610
1~5000
bit
WRFD010610
1~5000
bit
WRFD010610
1~5000
bit
WRFD010610
1~5000
bit
WRFD010610
1~5000
bit
WRFD010610
1~5000
bit
WRFD010610
1~5000
bit
WRFD010610
1~5000
bit
WRFD010610
Enumeration Type
1, 2, 3, 4, 5, 6, 7, 8
None
None
None HSPA+ HSDPA Downlink Enhanced 28Mbps per Package User HSPA+ Downlink 21Mbps per User
0~5, 8~27
None
Enumeration Type
E_F_DPCH_OFF, E_F_DPCH_ON
Enumeration Type
WRFD020101
Admission Control
MIMO, 64QAM 64QAM, MIMO, E_FACH, DTX_DRX, HS_SCCH_LESS_O PERATION, Bit Field Type L2ENHANCED
64QAM, MIMO, MIMO, 64QAM None E_FACH, DTX_DRX, HS_SCCH_LESS _OPERATION, L2ENHANCED None
WRFD01061004
-50~0, step:0.1
dB
WRFD01061006
HSDPA Mobility Management Interval Type 0~1024 CPC - HSSCCH less operation CPC - HSSCCH less operation CPC - HSSCCH less operation CPC - HSSCCH less operation
0~1024
WRFD010687
Enumeration Type
FALSE, TRUE
FALSE, TRUE
None
WRFD010687
Enumeration Type
FALSE, TRUE
FALSE, TRUE
None
WRFD010687
Enumeration Type
FALSE, TRUE
FALSE, TRUE
None
WRFD010687
Enumeration Type
FALSE, TRUE
FALSE, TRUE
None
WRFD01061001
1~15
None
WRFD01061001
WRFD01061001
WRFD010610
9.5DB(9.5dB), 10.0DB(10.0dB), 10.5DB(10.5dB), 11.0DB(11.0dB), 11.5DB(11.5dB), 12.0DB(12.0dB), 12.5DB(12.5dB), 13.0DB(13.0dB), 13.5DB(13.5dB), 14.0DB(14.0dB), 14.5DB(14.5dB), Interval Type 1~15 15.0DB(15.0dB), 15.5DB(15.5dB), 16.0DB(16.0dB), 16.5DB(16.5dB), Interval Type 1~15 17.0DB(17.0dB), 17.5DB(17.5dB), 18.0DB(18.0dB), Enumeration 18.5DB(18.5dB), Type 19.0DB(19.0dB)
1~15
None
1~15
None
-3~19, step:0.5
dB
WRFD020203
Enumeration Type
WRFD010610
Enumeration Type
None
None HSDPA Introduction Package HSUPA Introduction Package HSUPA Introduction Package HSUPA Introduction Package HSUPA Introduction Package
0~11
None
WRFD010610
1~15
None
WRFD010612
Enumeration Type
D10, D20, D50, D100, 10, 20, 50, 100, D200, D500, D1000 200, 500, 1000
ms
WRFD010612
Enumeration Type
D10, D20, D50, D100, 10, 20, 50, 100, D200, D500, D1000 200, 500, 1000 D2, D10, D20, D50, D100, D200, D500, D1000 D2, D10, D20, D50, D100, D200, D500, D1000
ms
WRFD010612
Enumeration Type
WRFD010612
Enumeration Type
WRFD020101
Admission Control
None
WRFD01061208
HSUPA DCCC Inter-RAT Handover Admission Based on Control Coverage Inter Frequency Hard Handover Based on Coverage
Enumeration Type
D8, D16, D32, D64, D128, D144, D256, D384, D608, D1450, D2048, D2890, D5760
8, 16, 32, 64, 128, 144, 256, 384, 608, 1450, 2048, 2890, 5760 kbit/s
Enumeration Type
MBR, GBR
MBR, GBR
None
Enumeration Type
None
WRFD020101
Admission Control
WRFD01061208
HSUPA DCCC
Enumeration Type
0~1, step: 0.01 RATE_UP_AND_ None RATE_UP_AND_DO DOWN_ON_EDC WN_ON_EDCH, H, RATE_UP_ONLY_O RATE_UP_ONLY N_EDCH _ON_EDCH None
WRFD020101
Admission Control
0~1, step:0.01
per cent
WRFD020101
Admission Control
WRFD01061208
HSUPA DCCC
Interval Type 0~100 D32, D64, D8, D16, D128, D144, D256, D384, D608, D1440, Enumeration D2048, D2880, Type D5740
0~1, step:0.01
per cent
8, 16, 32, 64, 128, 144, 256, 384, 608, 1440, 2048, 2880, 5740 kbit/s
WRFD020101
Admission Control
None
WRFD020101
Admission Control
0~1, step:0.01
per cent
WRFD020102
Load Measurement Interval Type 1~32 3.4/6.8/13.6/27. 2 kbit/s RRC Connection and RAB Assignment Interval Type 0~65534
1~32
None
WRFD010510
0~65534
None
WRFD010510
3.4/6.8/13.6/27. 2 kbit/s RRC Connection and RAB Assignment Interval Type 0~100
0~100
per cent
WRFD020101
Admission Control
None
0~8040000
kbit/s
WRFD020102
Load Measurement
WRFD020102
Load Measurement Multi-Carrier Switch off Based on Traffic ATM QoS Load Introduction on Hub NodeB (Overbooking on Hub Node B Transmission)
WRFD020117
WRFD050406
WRFD050404
ATM/IP Dual ATM QoS Stack Node B Introduction on Hub NodeB (Overbooking on Hub Node B Transmission)
WRFD050406
WRFD050404
ATM/IP Dual ATM QoS Stack Node B Introduction on Hub NodeB (Overbooking on Hub Node B ATM QoS Transmission) Introduction on Hub NodeB (Overbooking on Hub Node B Transmission)
WRFD050406
WRFD050406
Interval Type 0~100 CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, Interval Type AF21, AF22, AF23, 0~100 AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, Interval Type 0~5 RT_VBR, CBR, LQAF21, LQAF22, NRT_VBR, UBR, BE, LQAF23, LQAF31, AF11, AF12, AF13, LQAF32, LQAF33, Enumeration AF21, AF22, AF23, LQAF41, LQAF42, AF31, AF32, AF33, Type LQAF43, LQEF AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, Interval Type 0~100 LQAF31, LQAF23, LQAF32, LQAF33, LQAF41, LQAF42, Enumeration LQAF43, LQEF, Type NULL CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, Interval Type AF21, AF22, AF23, 0~100 AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, Interval Type 0~100 LQAF22, LQAF21, LQAF23, LQAF31, LQAF32, LQAF33, Enumeration LQAF41, LQAF42, Type LQAF43, LQEF
CBR, RT_VBR, 0~1, step:0.01 NRT_VBR, UBR, per cent BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, 0~1, step:0.01 per cent AF33, AF41, AF42, AF43, EF, CBR, RT_VBR, LQBE, LQAF11, NRT_VBR, UBR, LQAF12, LQAF13, 0~5 AF11, AF12, None BE, LQAF21, LQAF22, AF13, AF21, LQAF23, LQAF31, AF22, AF23, LQAF32, LQAF33, AF31, AF32, LQAF41, LQAF42, AF33, AF41, LQAF43, LQEF None AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, 0~100 LQAF31, None LQAF23, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, CBR, RT_VBR, NULL NRT_VBR, UBR, None BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, 0~100 None AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, 0~100 LQAF22, per cent LQAF21, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF None
WRFD050404
WRFD050406
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, ATM/IP Dual ATM QoS LQAF21, LQAF22, Stack Node B Interval Type 0~100 LQAF31, Introduction on LQAF23, Hub NodeB LQAF32, LQAF33, (Overbooking LQAF41, LQAF42, on Hub Node B Enumeration LQAF43, LQEF, Transmission) Type NULL
NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, 0~100 LQAF31, None LQAF23, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL None
WRFD050404
ATM/IP Dual ATM QoS Stack Node B Interval Type 0~100 Introduction on Hub NodeB (Overbooking on Hub Node B Transmission) Interval Type 0~100
0~100
None
WRFD050406
0~100
per cent
WRFD050404
WRFD050404
ATM/IP Dual ATM QoS Stack Node B Introduction on Hub NodeB (Overbooking on Hub Node B ATM QoS Transmission) Introduction on Hub NodeB (Overbooking on Hub Node B ATM QoS Transmission) Introduction on Hub NodeB (Overbooking on Hub Node B ATM QoS Transmission) Introduction on Hub NodeB (Overbooking on Hub Node B ATM QoS Transmission) Introduction on Hub NodeB (Overbooking on Hub Node B ATM QoS Transmission) Introduction on Hub NodeB (Overbooking on Hub Node B Transmission)
WRFD050406
WRFD050406
WRFD050406
WRFD050406
WRFD050406
WRFD050406
Interval Type 0~100 CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, Interval Type 0~100RT_VBR, CBR, AF31, AF32, AF33, NRT_VBR, UBR, BE, AF41, AF42, AF43, AF11, AF12, AF13, EF, LQBE, LQAF11, AF21, AF22, AF23, LQAF12, LQAF13, Interval Type AF31, AF32, AF33, 0~100 LQAF22, LQAF21, AF41,RT_VBR, CBR, AF42, AF43, LQAF23, LQAF31, EF, LQBE, LQAF11, NRT_VBR, UBR, BE, LQAF32, LQAF33, LQAF12, LQAF13, AF11, AF12, AF13, Enumeration LQAF41, LQAF42, LQAF21, LQAF22, AF21,RT_VBR, Type LQAF43, LQEF CBR, AF22, AF23, LQAF23, LQAF31, AF31, AF32, AF33, NRT_VBR, UBR, BE, LQAF32, LQAF33, AF41, AF42, AF43, AF11, AF12, AF13, LQAF41, LQAF42, EF, LQBE, LQAF11, Enumeration AF21, AF22, AF23, LQAF43, LQEF, LQAF12, LQAF13, AF31, Type NULL AF32, AF33, LQAF21, LQAF22, AF41,RT_VBR, CBR, AF42, AF43, LQAF23, LQAF31, EF, LQBE, LQAF11, NRT_VBR, UBR, BE, LQAF32, LQAF33, LQAF12, LQAF13, AF11, AF12, AF13, Enumeration LQAF41, LQAF42, LQAF21, LQAF22, AF21, AF22, AF23, Type LQAF43, LQEF LQAF23, LQAF31, AF31, AF32, AF33, LQAF32, LQAF33, AF41, AF42, AF43, LQAF41, LQAF42, EF, LQBE, LQAF11, Enumeration LQAF43, LQEF, LQAF12, LQAF13, Type NULL LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, Enumeration LQAF41, LQAF42, Type LQAF43, LQEF
CBR, RT_VBR, 0~100 NRT_VBR, UBR, None BE, AF11, AF12, AF13,RT_VBR, CBR, AF21, AF22, AF23, NRT_VBR, UBR, AF31, 0~100 AF32, BE, AF11, AF12, None AF33, AF41, AF13, AF21, AF42, AF43, EF, AF22, AF23, LQBE,AF32, LQAF11, AF31,RT_VBR, CBR, LQAF12, LQAF13, AF33, AF41, 0~100 LQAF22, per cent NRT_VBR, UBR, LQAF21, AF42, AF43, EF, BE, AF11, AF12, LQAF23, LQAF31, LQBE,AF21, LQAF11, AF13,RT_VBR, LQAF32, LQAF33, CBR, LQAF12, LQAF13, AF22, AF23, LQAF41, LQAF42, NRT_VBR, UBR, LQAF21, LQAF22, AF31, AF32, LQAF43, LQEF BE, AF11, AF12, LQAF23, LQAF31, None AF33, AF41, AF13, AF21, LQAF32, LQAF33, AF42, AF43, EF, AF22, AF23, LQAF41, LQAF42, LQBE,AF32, LQAF11, AF31,RT_VBR, LQAF43, LQEF, CBR, LQAF12, LQAF13, AF33, NULL AF41, NRT_VBR, UBR, None LQAF21, LQAF22, AF42, AF43, EF, BE, AF11, AF12, LQAF23, LQAF31, LQBE,AF21, AF13, LQAF11, LQAF32, LQAF33, LQAF12, LQAF13, AF22, AF23, LQAF41, LQAF42, LQAF21, LQAF22, AF31, AF32, LQAF43, LQEF LQAF23, LQAF31, None AF33, AF41, LQAF32, LQAF33, AF42, AF43, EF, LQAF41, LQAF42, LQBE, LQAF11, LQAF43, LQEF, LQAF12, LQAF13, NULL LQAF21, LQAF22, None LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF None
WRFD050406
ATM QoS Introduction on Hub NodeB (Overbooking on Hub Node B Enumeration Transmission) Type
AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL None
WRFD050404
0~100
None
WRFD050404
0~100
None
Enumeration Type
CLOSE(Close), OPEN(Open)
CLOSE, OPEN
None
String Type
None
1~9 characters
per cent
String Type
None
1~9 characters
per cent
WRFD050404
WRFD050404
None
WRFD050406
ATM QoS None Introduction on Hub NodeB (Overbooking on Hub Node B Transmission)
WRFD050404
ATM/IP Dual ATM QoS Stack Node B Introduction on Hub NodeB (Overbooking on Hub Node B Transmission)
WRFD050406
Interval Type 0~100 CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, Interval Type 0~100 AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, Interval Type 0~335RT_VBR, CBR, LQAF21, LQAF22, NRT_VBR, UBR, BE, LQAF23, LQAF31, AF11, AF12, AF13, LQAF32, LQAF33, AF21, AF22, AF23, Enumeration LQAF41, LQAF42, AF31, AF32, AF33, Type LQAF43, LQEF AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, Interval Type 0~100 LQAF31, LQAF23, LQAF32, LQAF33, LQAF41, LQAF42, Enumeration LQAF43, LQEF, Type NULL
CBR, RT_VBR, 0~100 NRT_VBR, UBR, None BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, 0~100 AF32, None AF33, AF41, AF42, AF43, EF, CBR, RT_VBR, LQBE, LQAF11, NRT_VBR, UBR, LQAF12, LQAF13, 0~335 LQAF22, None BE, AF11, AF12, LQAF21, AF13, AF21, LQAF23, LQAF31, AF22, AF23, LQAF32, LQAF33, AF31, AF32, LQAF41, LQAF42, AF33, AF41, LQAF43, LQEF None AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, 0~100 LQAF31, None LQAF23, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL None
WRFD050404
ATM/IP Dual ATM QoS Stack Node B Interval Type Introduction on Hub NodeB (Overbooking on Hub Node B ATM QoS Transmission) Interval Type Introduction on Hub NodeB (Overbooking on Hub Node B Enumeration Transmission) Type
WRFD050406
WRFD050406
WRFD050404
ATM/IP Dual ATM QoS Stack Node B Interval Type Introduction on Hub NodeB (Overbooking on Hub Node B Enumeration Transmission) Type
WRFD050406
WRFD050404
ATM/IP Dual ATM QoS Stack Node B Interval Type Introduction on Hub NodeB (Overbooking on Hub Node B ATM QoS Transmission) Interval Type Introduction on Hub NodeB (Overbooking on Hub Node B Enumeration Transmission) Type
WRFD050406
WRFD050406
WRFD050404
ATM/IP Dual ATM QoS Stack Node B Interval Type Introduction on Hub NodeB (Overbooking on Hub Node B Enumeration Transmission) Type
WRFD050406
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, 0~100 AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, 0~100RT_VBR, CBR, LQAF21, LQAF22, NRT_VBR, UBR, BE, LQAF23, LQAF31, AF11, AF12, AF13, LQAF32, LQAF33, AF21, AF22, AF23, LQAF41, LQAF42, AF31, AF32, AF33, LQAF43, LQEF AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, 0~100 LQAF31, LQAF23, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, 0~100 AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, 0~100RT_VBR, CBR, LQAF21, LQAF22, NRT_VBR, UBR, BE, LQAF23, LQAF31, AF11, AF12, AF13, LQAF32, LQAF33, AF21, AF22, AF23, LQAF41, LQAF42, AF31, AF32, AF33, LQAF43, LQEF AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, 0~100 LQAF31, LQAF23, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, 0~100 AF32, None AF33, AF41, AF42, AF43, EF, CBR, RT_VBR, LQBE, LQAF11, NRT_VBR, UBR, LQAF12, LQAF13, 0~100 LQAF22, per cent BE, AF11, AF12, LQAF21, AF13, AF21, LQAF23, LQAF31, AF22, AF23, LQAF32, LQAF33, AF31, AF32, LQAF41, LQAF42, AF33, AF41, LQAF43, LQEF None AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, 0~100 LQAF31, None LQAF23, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, CBR, RT_VBR, NULL NRT_VBR, UBR, None BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, 0~100 AF32, None AF33, AF41, AF42, AF43, EF, CBR, RT_VBR, LQBE, LQAF11, NRT_VBR, UBR, LQAF12, LQAF13, 0~100 LQAF22, per cent BE, AF11, AF12, LQAF21, AF13, AF21, LQAF23, LQAF31, AF22, AF23, LQAF32, LQAF33, AF31, AF32, LQAF41, LQAF42, AF33, AF41, LQAF43, LQEF None AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, 0~100 LQAF31, None LQAF23, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL None
WRFD050404
ATM/IP Dual ATM QoS Stack Node B Interval Type 0~100 Introduction on Hub NodeB (Overbooking on Hub Node B Transmission) Interval Type 0~100
0~100
None
WRFD050406
0~100
per cent
WRFD050406
ATM QoS Introduction on Hub NodeB (Overbooking on Hub Node B Enumeration ATM QoS Transmission) Type Introduction on Hub NodeB (Overbooking on Hub Node B Enumeration ATM QoS Transmission) Type Introduction on
AF11, AF12, AF13, AF21,RT_VBR, CBR, AF22, AF23, AF31, AF32, AF33, NRT_VBR, UBR, BE, AF41, AF42, AF43, AF11, AF12, AF13, EF, LQBE, LQAF11, AF21, AF22, AF23, LQAF12, LQAF13, AF31, AF32, AF33, LQAF21, LQAF22, AF41, AF42, AF43, LQAF23, LQAF31, EF, LQBE, LQAF11, LQAF32, LQAF33, LQAF12, LQAF13, LQAF41, LQAF42, LQAF21, LQAF22, LQAF43, LQEF LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
AF22, AF23, NRT_VBR, UBR, AF31, AF32, BE, AF11, AF12, AF33, AF41, AF13, AF21, AF42, AF43, EF, AF22, AF23, LQBE,AF32, AF31, LQAF11, LQAF12, LQAF13, AF33, AF41, LQAF21, LQAF22, AF42, AF43, EF, LQAF23, LQAF31, LQBE, LQAF11, LQAF32, LQAF33, LQAF12, LQAF13, LQAF41, LQAF42, LQAF21, LQAF22, LQAF43, LQEF LQAF23, LQAF31, None LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL None
WRFD050406
WRFD050406
0~100
per cent
None
None
32~65535
None
None WRFD020202 WRFD020203 WRFD020202 WRFD020203 WRFD020202 WRFD020203 WRFD020202 WRFD020203 WRFD020202 WRFD020203 WRFD020202 WRFD020203
None
0~4095
None
Intra RNC Softer Handover Inter RNC Soft Handover Interval Type 0~15 Intra RNC Softer Handover Inter RNC Soft Handover Interval Type 0~15 Intra RNC Softer Handover Inter RNC Soft Handover Interval Type 0~15 Intra RNC Softer Handover Inter RNC Soft Handover Interval Type 0~15 Intra RNC Softer Handover Inter RNC Soft Handover Interval Type 0~15 Intra RNC Softer Handover Inter RNC Soft Handover Interval Type 0~15 Inter Frequency Hard Handover Based on Coverage Interval Type 0~29
0~7.5, step:0.5
dB
0~7.5, step:0.5
dB
0~7.5, step:0.5
dB
0~7.5, step:0.5
dB
0~7.5, step:0.5
dB
0~7.5, step:0.5
dB
WRFD020302
0~14.5, step:0.5
dB/ dBm
WRFD021200
0~14.5, step:0.5
dB
WRFD020302
Inter Frequency Hard Handover Based on Coverage Interval Type 0~29 Inter-RAT Handover Based on Coverage
0~14.5, step:0.5
dB/ dBm
WRFD020303
0~14.5, step:0.5
dB/ dBm
WRFD020302
Inter Frequency Hard Handover Based on Coverage Interval Type 0~29 Inter-RAT Handover Based on Coverage Inter-RAT Handover Inter-RAT Based on Handover Coverage Based on
0~14.5, step:0.5
dB/ dBm
WRFD020303
0~14.5, step:0.5
dB/ dBm
0~7.5, step:0.5
dB
Service Inter-RAT Handover Based on Load Interval Type 0~15 Inter-RAT Handover Based on Coverage
0~7.5, step:0.5
dB
WRFD020303
0~7.5, step:0.5
dB
WRFD020302
Inter Frequency Hard Handover Based on Coverage Interval Type 0~29 ATM Transmission Introduction Package ATM Transmission Introduction Package
0~14.5, step:0.5
dB/ dBm
WRFD050301
180~1260
WRFD050301
60~600
WRFD050402
44~1024
byte
None
None
1~30
None
None
None
WRFD021103
Enumeration Type
BARRED, NOT_BARRED
BARRED, NOT_BARRED
None
WRFD021103
Enumeration Type
ALLOWED, NOT_ALLOWED
WRFD010801
0~40, step:2
dB
Intra RNC Cell Update Intra RNC Cell Update Inter RNC Cell Update Intra RNC Cell Update Inter RNC Cell Update
dB
-50~50
dB
-50~50
dB
WRFD010801
dB
WRFD010801
dB
WRFD021103
Enumeration Type
D10, D20, D40, D80, 10, 20, 40, 80, D160, D320, D640, 160, 320, 640, D1280 1280
WRFD050301
10000~30000(UNI ), 100~30000(NNI) ms
WRFD01061006
0~120
WRFD010101
3GPP Specifications
5000~30000
ms
None
None
None
WRFD050304
IMA for E1T1 or Channelized STM-1/OC-3 on Iub Interface Interval Type 0~167 IMA for E1T1 or Channelized STM-1/OC-3 on Iub Interface Interval Type 0~255 IMA for E1T1 or Channelized STM-1/OC-3 on Iub Interface Interval Type 0~335 IMA for E1T1 or Channelized STM-1/OC-3 on Enumeration Iub Interface 3.4/6.8/13.6/27. Type 2 kbit/s RRC Connection and RAB Enumeration Assignment Type
None
WRFD050304
0~255
None
WRFD050304
0~335
None
WRFD050304
V1.0(V1.0), V1.1(V1.1)
V1.0, V1.1
None
WRFD010510
WRFD010618
Enumeration Type
DCH(UL_DCH,DL_D OFF, ON OFF, ON CH), HSDPA(UL_DCH,DL _HSDSCH), HSPA(UL_EDCH,DL_ DCH, HSDPA, HSDSCH) HSPA
None
None
WRFD010688
Enhanced CELL-FACH
1~1000
kbit/s
WRFD021303
String Type
None
None
WRFD021303
String Type
None
None
3.4/6.8/13.6/27. 2 kbit/s RRC Connection and RAB Sharing Enumeration RAN Assignment Type Introduction Package MOCN Introduction RAN Sharing Package Introduction Package MOCN Introduction Package
D32, D64
32, 64
kbit/s
0~999
None
0~999
None
WRFD010688
Enhanced CELL-FACH
Interval Type 1~2000 D1, D4, D8, D16, D32, D64, D128, D256
1~2000
kbit/s
WRFD010686
Enumeration Type
WRFD010686
Enumeration Type
D0, D1, D2, D4, D8, 0, 1, 2, 4, 8, 16, D16, D32, D64, D128, 32, 64, 128, 256, D256, D512 512 D0, D1, D2, D4, D8, D16, D32, D64, D128, 0, 1, 2, 4, 8, 16, D256 32, 64, 128, 256
None
WRFD010686
Enumeration Type
None
Enumeration Type
CLOSE(Close), OPEN(Open)
CLOSE, OPEN
None
WRFD050301
1200~2000
ms
WRFD011401
Integrity Protection
For each switch of this parameter, the value can be: ON or OFF. None
WRFD010688
Enhanced CELL-FACH
1~1000
kbit/s
WRFD010688
Enhanced CELL-FACH
1~2000
kbit/s
WRFD020302
CSAMR_INTERFRE Q, CSNONAMR_INTER Inter Frequency FREQ, Hard Handover PSR99_INTERFREQ, Based on PSHSPA_INTERFRE Coverage Bit Field Type Q HCS (Hierarchical Cell Structure)
WRFD021200
-24~0
dB
WRFD020302
Inter Frequency Hard Handover Based on Coverage Interval Type -24~0 Inter Frequency Hard Handover Based on Coverage Interval Type -115~-25 Inter Frequency Hard Handover Based on Coverage Interval Type -24~0 Inter Frequency Hard Handover Based on Coverage Interval Type -115~-25 Inter Frequency Hard Handover Based on Coverage Interval Type Inter Frequency Inter Frequency Hard Handover Hard Handover Based on Enumeration Based on Coverage Type Coverage Inter-RAT Handover Based on Coverage Enumeration Type INTER_FREQ_COV( Coverage-based inter-frequency 0~100 handover), D0, D1, D2, D3, D4, INTER_FREQ_COV_ D5, D6, D7, D8, D9, NCOV(CoverageD11, D13, D15, D17, based and nonD19 coverage-based interRAT handover), INTER_FREQ_TA(Tr affic-based interfrequency handover)
-24~0
dB
WRFD020302
-115~-25
dBm
WRFD020302
-24~0
dB
WRFD020302
-115~-25
dBm
WRFD020302
0~100
None
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 13, 15, 17, 19 INTER_FREQ_C None OV, INTER_FREQ_C OV_NCOV, INTER_FREQ_TA None
WRFD020302
Inter Frequency Hard Handover Based on Coverage Interval Type -24~0 Inter Frequency Hard Handover Based on Coverage Interval Type -115~-25 Inter Frequency Hard Handover Based on Coverage Interval Type -24~0
-24~0
dB
WRFD020302
-115~-25
dBm
WRFD020302
-24~0
dB
WRFD020302
WRFD020102
Inter Frequency Hard Handover Based on Coverage Interval Type -115~-25 -115~-25 NOT_REQUIRE, NOT_REQUIRE, dBm INTER_FREQ, INTER_FREQ, INTER_RAT, INTER_RAT, Load Enumeration INTER_FREQ_AND_I INTER_FREQ_AN Measurement Type NTER_RAT D_INTER_RAT None Inter Frequency Hard Handover Based on Enumeration Coverage Type CPICH_EC/NO, CPICH_EC/NO, CPICH_RSCP, CPICH_RSCP, BOTH BOTH
WRFD020302
None
WRFD020302
Inter Frequency Hard Handover Based on Coverage Interval Type 0~512 Inter Frequency Hard Handover Based on Coverage Interval Type 0~512 Intra RNC Softer Handover Inter RNC Soft Enumeration Handover Type HCS (Hierarchical Cell Structure)
0~512
0~512
OFF, ON
OFF, ON
None
WRFD021200
-24~0
dB
WRFD020302
Inter Frequency Hard Handover Based on Coverage Interval Type -24~0 Inter Frequency Hard Handover Based on Coverage Interval Type -115~-25 Inter Frequency Hard Handover Based on Coverage Interval Type -24~0 Inter Frequency Inter Frequency Hard Handover Hard Handover Based on Based on Coverage Interval Type Coverage Inter-RAT Handover Based on Coverage Enumeration Type
-24~0
dB
WRFD020302
-115~-25
dBm
WRFD020302
-24~0
dB
INTERFREQ(interfrequency handover only), -115~-25 dBm INTERRAT(inter-RAT -115~-25 handover only), INTERFREQ, SIMINTERFREQRAT( INTERRAT, inter-frequency and SIMINTERFREQR inter-RAT handover) AT None
WRFD020302
Inter Frequency Hard Handover Based on Enumeration Coverage Type Inter Frequency Hard Handover Based on Enumeration Coverage Type
PERIODICAL_REPO RTING(Periodical reporting), EVENT_TRIGGER(E vent trigger) PERIODICAL_REPO RTING(Periodical reporting), EVENT_TRIGGER(E vent trigger)
WRFD020302
WRFD010801
None
WRFD020302
Inter Frequency Hard Handover Based on Coverage Interval Type 0~100 Mobility Control and Service Enumeration Differentiation Type Mobility Control and Service Enumeration Differentiation Type Inter-RAT Handover Based on Coverage Inter-RAT Handover Based on Coverage Inter-RAT Handover Based on Coverage Inter-RAT Handover Based on Coverage Inter-RAT Handover Based on Coverage Inter-RAT Handover Based on Coverage
0~100
None
WRFD02130403
NO, YES
NO, YES
None
WRFD02130403
NO, YES
NO, YES
None
WRFD020303
WRFD020303
-24~0
dB
WRFD020303
-115~-25
dBm
WRFD020303
-24~0
dB
WRFD020303
-115~-25
dBm
WRFD020303
0~100
None
Inter-RAT Handover Based on Coverage Inter-RAT Handover Based on Service Inter-RAT Inter-RAT Handover Enumeration Handover Based on Load Type Based on
D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, 0, 1, 2, 3, 4, 5, 6, D11, D13, D15, D17, 7, 8, 9, 11, 13, 15, D19 17, 19 None
Service Inter-RATRTT Cell ID + Handover Based Function Based on Load Interval Type 1~16 LCS OTDOA Based LCS A-GPS Based Enumeration LCS Type
1~16
None
NO, YES
Inter-RAT Handover Cell ID + RTT Based on Based Function Coverage Interval Type 0~63 LCS OTDOA Based LCS A-GPS Based Enumeration LCS Type Inter-RAT Handover Based on Coverage Inter-RAT Handover Based on Coverage Inter-RAT Handover Based on Coverage Inter-RAT Handover Inter-RAT Based on Handover Coverage Based on
lower than -110, NO, YES -110~-48(Actual None value meets the condition: Actual Value = GUI Value - 111) dBm
None
WRFD020303
-24~0
dB
WRFD020303
-115~-25
dBm
WRFD020303
-24~0
dB
-115~-25
dBm
Service Inter-RAT Handover Based on Load Interval Type 0~512 Inter-RAT Handover Based on Coverage Inter-RAT Handover Based on Coverage
0~512
WRFD020303
0~512
WRFD020303
Enumeration Type
OFF, ON
OFF, ON
None
Inter-RAT Handover lower than -110, Based on -110~-48(Actual Service value meets the NON_PERIODIC_RE condition: Actual Inter-RAT Inter-RAT PORT(Non periodical Value = GUI Value Handover Handover lower than -110, reporting), D250~1 Based on Load Interval Type 0~63 - 111) Based on -110~-48(Actual dBm D500~2 D1000~3 Service value meets the D2000~4 D3000~5 NON_PERIODIC_ Inter-RAT condition: Actual D4000~6 D6000~7 REPORT, 250, Handover D8000~8 D12000~9 Value = GUI Value 500, 1000, 2000, Based on Load Interval Type 0~63 - 111) 4000, 6000, dBm D16000~10 3000, Inter-RAT D20000~11 8000, 12000, Handover D24000~12 16000, 20000, Inter-RAT Based on Enumeration D28000~13 24000, 28000, Handover Coverage Type D32000~14 D64000 32000, 64000 ms Based on Service Inter-RAT Handover Based on Load Interval Type 0~63 Inter-RAT Handover Based on Coverage Inter-RAT Handover Based on Coverage Inter-RAT Handover Based on Coverage Inter-RAT Handover Based on Coverage Inter-RAT Handover Based on Coverage Inter-RAT Handover Based on Coverage Inter-RAT Handover Based on Coverage Inter-RAT Handover Based on Coverage
0~63
None
WRFD020303
0~7.5, step:0.5
dBm
WRFD020303
0~65535
WRFD020303
-24~0
dB
WRFD020303
-115~-25
dBm
WRFD020303
-24~0
dB
WRFD020303
WRFD020303
Interval Type -115~-25 PERIODICAL_REPO RTING(Periodical reporting), Enumeration EVENT_TRIGGER(E Type vent trigger) PERIODICAL_REPO Enumeration Type RTING(Periodical reporting), EVENT_TRIGGER(E vent trigger)
-115~-25
dBm
WRFD020303
WRFD010801
None
WRFD020303
0~100
None
1~240
Ethernet OAM
1~10
Intra RNC Softer Handover Inter RNC Soft Handover Interval Type -24~0 Intra RNC Softer Handover Inter RNC Soft Handover Interval Type -115~-25 Intra RNC Softer Handover Inter RNC Soft Enumeration Handover Type
-24~0
dB
-115~-25
dBm
D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, 0, 1, 2, 3, 4, 5, 6, D11, D13, D15, D17, 7, 8, 9, 11, 13, 15, D19 17, 19 None
WRFD020104
1~86400
Load Measurement
Enumeration Type
REQUIRE, NOT_REQUIRE
REQUIRE, NOT_REQUIRE
None
Intra RNC Softer Handover Inter RNC Soft Enumeration Handover Type Intra RNC Softer Handover Inter RNC Soft Enumeration Handover Type Load Based handover enhancement on Iur-g (3G to 2G) Enumeration Type
CPICH_EC/NO, CPICH_RSCP
CPICH_EC/NO, CPICH_RSCP
None
OFF, ON
OFF, ON
None
WRFD071101
FALSE, TRUE
TRUE, FALSE
None
Cell ID + RTT Function Based LCS Interval Type 0~29 Intra RNC Softer Handover Inter RNC Soft Handover Interval Type 0~29 Intra RNC Softer Handover Inter RNC Soft Handover Interval Type 0~29 Intra RNC Softer Handover Inter RNC Soft Handover Interval Type 0~29 Cell ID + RTT Function Based LCS Interval Type 0~29 Intra RNC Softer Handover Inter RNC Soft Handover Interval Type 0~29 Intra RNC Softer Handover Inter RNC Soft Handover Interval Type 0~29 Intra RNC Softer Handover Inter RNC Soft Handover Interval Type 0~29
dB
0~14.5, step:0.5
dB
0~14.5, step:0.5
dB
0~14.5, step:0.5
dB
dB
0~14.5, step:0.5
dB
0~14.5, step:0.5
dB
0~14.5, step:0.5
dB
WRFD010101
3GPP Specifications
15000~120000
ms
None
None
1~1440
min
None
None
30~1024
None
None
IP Address Type
None
WRFD050402
None
None
None
IP Address Type
None
None
None
None
IP Address Type
None
None
None
None
IP Address Type
None
None
None
IP Address Type
None
IP Address Type
None
None
None
IP Address Type
None
None
Enumeration Type
None
None
Enumeration Type
None
None
0~5
None
0~5
None
WRFD031101
DHCP
Enumeration Type
NO(NO), YES(YES)
NO, YES
None
DHCP FP MUX for IP Interval Type 0~988 Transmission UDP MUX for Iu-CS Transmission Interval Type 0~12999
0~988
None
0~12999
None
WRFD031101
DHCP
0~5, 8~27
None
WRFD031101
DHCP
0~11
None
WRFD050403
Enumeration Type
None
WRFD021103
Enumeration Type
BARRED, NOT_BARRED
BARRED, NOT_BARRED
None
WRFD021103
Enumeration Type
BARRED, NOT_BARRED
BARRED, NOT_BARRED
None
WRFD021103
Enumeration Type
BARRED, NOT_BARRED
BARRED, NOT_BARRED
None
WRFD021103
Enumeration Type
BARRED, NOT_BARRED
BARRED, NOT_BARRED
None
WRFD021103
Enumeration Type
BARRED, NOT_BARRED
BARRED, NOT_BARRED
None
WRFD021103
Enumeration Type
BARRED, NOT_BARRED
BARRED, NOT_BARRED
None
WRFD021103
Enumeration Type
BARRED, NOT_BARRED
BARRED, NOT_BARRED
None
WRFD021103
Enumeration Type
BARRED, NOT_BARRED
BARRED, NOT_BARRED
None
WRFD021103
Enumeration Type
BARRED, NOT_BARRED
BARRED, NOT_BARRED
None
WRFD021103
Enumeration Type
BARRED, NOT_BARRED
BARRED, NOT_BARRED
None
WRFD021103
Enumeration Type
BARRED, NOT_BARRED
BARRED, NOT_BARRED
None
WRFD021103
Enumeration Type
BARRED, NOT_BARRED
BARRED, NOT_BARRED
None
WRFD021103
Enumeration Type
BARRED, NOT_BARRED
BARRED, NOT_BARRED
None
WRFD021103
Enumeration Type
BARRED, NOT_BARRED
BARRED, NOT_BARRED
None
WRFD021103
Enumeration Type
BARRED, NOT_BARRED
BARRED, NOT_BARRED
None
WRFD021103
Access Class Enumeration ATM QoS Restriction on Type Introduction Hub NodeB (Overbooking on Hub Node B Enumeration Transmission) Type
BARRED, NOT_BARRED
BARRED, NOT_BARRED
None
WRFD050406
NO(NO), YES(YES)
NO, YES
None
WRFD010510
FALSE, TRUE
FALSE, TRUE
None
License Enumeration MRFD-210403 ManagementIP Type FP MUX for WRFD050420 WRFD050412 Transmission UDP MUX for Iu-CS Transmission Enumeration Type
NO(NO), YES(YES)
NO, YES
None
NO(NO), YES(YES)
NO, YES
None
WRFD05030104
NO, YES
None
Enumeration Type
None
None
Enumeration Type
NO(NO), YES(YES) IUB(Iub Interface), IUR(Iur Interface), IUCS(Iu-CS Interface), IUPS(IuPS Interface)
NO, YES
None
None
WRFD021103
1~3600
WRFD020107
Overload Control
0~10
None
WRFD020107
Overload Control
0~10
None
WRFD010101
3GPP Specifications
1~65535
WRFD040100
Flow Control
0~100
None
WRFD040100
Flow Control
Enumeration Type
ON, OFF
ON, OFF
None
WRFD010101
3GPP Specifications
1~65535
WRFD02060501
OFF, ON
OFF, ON
None
WRFD040100
Flow Control
30~100
per cent
WRFD040100
Flow Control
30~100
per cent
WRFD040100
Flow Control
30~100
per cent
WRFD040100
Flow Control
30~100
per cent
SRNS Flow Control Relocation Introduction Package Inter RNC Soft Handover
Enumeration Type
ON, OFF
ON, OFF
None
Enumeration Type
TRUE, FALSE
TRUE, FALSE
None
WRFD040100
Flow Control
30~100
per cent
WRFD040100
Flow Control
30~100
per cent
WRFD040100
Flow Control
30~100
per cent
WRFD040100
Flow Control
30~100
per cent
WRFD040100
Flow Control
Enumeration Type
ON, OFF
ON, OFF
None
WRFD010651
OFF, ON
OFF, ON
None
WRFD010635
OFF, ON
OFF, ON
None
WRFD040100
Flow Control
30~100
per cent
WRFD040100
Flow Control
30~100
per cent
WRFD040100
Flow Control
30~100
per cent
WRFD040100
Flow Control
30~100
per cent
WRFD040100
Flow Control
Enumeration Type
ON, OFF
ON, OFF
None
WRFD040202
Enumeration Type
None
None
Enumeration Type
Hexadecimal(Hex decimal), Character_String(Cha Hexadecimal, racter String) Character_String None Hexadecimal(Hex decimal), Character_String(Cha Hexadecimal, racter String) Character_String None
None
None
Enumeration Type
None
None
Enumeration Type
None
None
None
String Type
None
None
None
Enumeration Type
None
None
Enumeration Type
None
None
None
String Type
None
None
None
Enumeration Type
None
None
None
Enumeration Type
Hexadecimal(Hex decimal), Character_String(Cha Hexadecimal, racter String) Character_String none Hexadecimal(Hex decimal), Character_String(Cha Hexadecimal, racter String) Character_String None
None
None
Enumeration Type
None
None
Enumeration Type
None
None
None
String Type
None
None
None
Enumeration Type
None
None
Enumeration Type
None
None
None
String Type
None
None
None
Enumeration Type
None
WRFD05030102
ATM over Channelized STM-1/OC-3 on Enumeration Iub Interface Type ATM over Channelized STM-1/OC-3 on Enumeration Iub Interface Type ATM over Channelized STM-1/OC-3 on Enumeration Iub Interface Type ATM over Channelized STM-1/OC-3 on Iub Interface String Type ATM over Channelized STM-1/OC-3 on Iub Interface String Type
OFF(OFF), ON(ON)
OFF, ON
None
WRFD05030102
WRFD05030102
WRFD05030102
None
0~64 characters
None
WRFD05030102
None
0~64 characters
None
None
None
Enumeration Type
ZERO(zero), SPACE(space)
ZERO, SPACE
None
None
None
Enumeration Type
None
None
1~30
WRFD050301
ATM Transmission Introduction 1000~3000(UNI), Package Interval Type 100~1200,1000~3000 100~1200(NNI) ms 3.4/6.8/13.6/27. 2 kbit/s RRC Connection and RAB Enumeration Assignment 3.4/6.8/13.6/27. Type 2 kbit/s RRC Connection and RAB Enumeration Assignment Type D1, D2, D3, D4, D1, D2, D3, D4, D5, D5, D6, D7, D8, D6, D7, D8, D9, D10 D9, D10
WRFD010510
None
WRFD010510
OFF, ON
OFF, ON
None
WRFD010101
3GPP Specifications
{1~65533}, {65535}
None
Enumeration Type
degree
String Type
None
None
None
100~10000, step:100
ms
None
None
0~100
None
None
None
0~10000
ms
None
None
0~15
None
None
None
0~15
None
None
None
Enumeration Type
WRFD020102
1~32
None
WRFD020400
Enumeration Type
Power, UserNumber
Power, UserNumber
None
WRFD020400
Enumeration Type
UserNumber, Power
Power, UserNumber
None
WRFD020400
0~100
per cent
WRFD020400
0~100
per cent
WRFD01061112
HSDPA DRD
0~100
per cent
WRFD01061112
0~100
per cent
WRFD020400
0~100
per cent
WRFD01061112
0~100
per cent
WRFD020400
Enumeration Type
ON, OFF
ON, OFF
None
WRFD020400
Enumeration Type
ON, OFF
ON, OFF
None
WRFD01061112
HSDPA DRD
Enumeration Type
ON, OFF
ON, OFF
None
WRFD01061112
Enumeration Type
ON, OFF
ON, OFF
None
WRFD020400
0~100
per cent
WRFD020106
Load Reshuffling
WRFD020310
OFF, ON
OFF, ON
None
WRFD020106
Load Reshuffling
Enumeration Type
FALSE(FALSE), TRUE(TRUE)
FALSE, TRUE
None
WRFD020106
Load Reshuffling
WRFD020106
Load Reshuffling
IUBLDR(Iub load reshuffling), CODELDR(Code load Interval Type 0~100 reshuffling), UULDR(Uu load IUBLDR(Iub load reshuffling), reshuffling), Enumeration CREDITLDR(Credit CODELDR(Code load Type load reshuffling) reshuffling), Enumeration Type UULDR(Uu load reshuffling), CREDITLDR(Credit load reshuffling)
0~1, step:0.01 IUBLDR, CODELDR, UULDR, CREDITLDR IUBLDR, CODELDR, UULDR, CREDITLDR
per cent
None
WRFD020106
Load Reshuffling
None
WRFD020106
Load Reshuffling
WRFD020106
Load Reshuffling
IUBLDR(Iub load reshuffling), CODELDR(Code load Interval Type 1~86400 reshuffling), UULDR(Uu load IUBLDR(Iub load reshuffling), reshuffling), Enumeration CREDITLDR(Credit CODELDR(Code load Type load reshuffling) reshuffling), Enumeration Type UULDR(Uu load reshuffling), CREDITLDR(Credit load reshuffling)
None
WRFD020106
Load Reshuffling
None
WRFD050404
1~63
None
WRFD021305
0~63
None
WRFD021305
0~63
None
WRFD021305
0~63
None
WRFD050409
IP Transmission Introduction on Iu Interface Interval Type 0~186 CRITICAL(Critical), MAJOR(Major), MINOR(Minor) INFO(Information Level), WARN(Warn Level), ERR(Error Level), AST(Assert Level)
0~186
None
Enumeration Type
None
None
None
Enumeration Type
None
None
None
Enumeration Type
ON(ON), OFF(OFF)
ON, OFF
None
WRFD050425
Ethernet OAM
0~7
None
None
None
None
Enumeration Type
None
Enumeration Type
None
None
None
Enumeration Type
IP
IP
None
None
None
Enumeration Type
IP
IP
None
90~99
per cent
TS1(Time_slot_1), TS2(Time_slot_2), TS3(Time_slot_3), TS4(Time_slot_4), TS5(Time_slot_5), TS6(Time_slot_6), TS7(Time_slot_7), Faulty TS8(Time_slot_8), MRFD-210304 Management Interval Type 70~95 70~95 TS9(Time_slot_9), TS10(Time_slot_10), Inter-RAT TS11(Time_slot_11), Handover TS12(Time_slot_12), Based on TS13(Time_slot_13), 0~167 None None Interval Type 0~167 Coverage TS14(Time_slot_14), WRFDInter Frequency TS15(Time_slot_15), 020303 Hard Handover TS16(Time_slot_16), WRFDBased on Enumeration D8, D16, D32, D64, 8, 16, 32, 64, 128, TS17(Time_slot_17), 020302 Coverage Type D128, D256 TS18(Time_slot_18), 256 TS2, TS3, TS1, TS19(Time_slot_19), TS4, TS5, TS6, Dynamic TS20(Time_slot_20), TS7, 16, 32, 64, Channel D0, D8, D16, D32, 0, 8, TS8, TS9, TS21(Time_slot_21), 128, 144, 256, TS10, TS11, WRFDConfiguration Enumeration D64, D128, D144, TS22(Time_slot_22), 384 TS13, TS12, 021101 Control (DCCC) Type D256, D384 TS23(Time_slot_23), TS14, TS15, TS24(Time_slot_24), TS16, TS17, TS25(Time_slot_25), TS18, TS19, Faulty TS26(Time_slot_26), TS20, TS21, MRFD-210304 Management String Type None TS27(Time_slot_27), 0~9 characters TS22, TS23, TS28(Time_slot_28), TS24, TS25, TS29(Time_slot_29), TS26, TS27, B0000(B0000), Enumeration TS30(Time_slot_30), TS28, TS29, B0001(B0001), None None Type TS31(Time_slot_31) TS30, TS31 B0010(B0010), B0011(B0011), B0100(B0100), LUCENT_MODE, LUCENT_MODE, B0000(B0000), Enumeration B0101(B0101), HUAWEI_MODE, HUAWEI_MODE, B0001(B0001), B0110(B0110), None None Type ALCATEL_MODE B0010(B0010), M3UA_MASTER_MO ALCATEL_MODE B0111(B0111), B0011(B0011), D(M3UA_MASTER_ M3UA_MASTER_ B1000(B1000), B0000, B0001, B0100(B0100), IP Transmission MOD), MOD, B0011, B1001(B1001), B0010, B0101(B0101), WRFDIntroduction on Enumeration M3UA_SLAVE_MOD( M3UA_SLAVE_M B1010(B1010), B0100, B0101, B0110(B0110), 050409 Iu Interface Type M3UA_SLAVE_MOD) OD B1011(B1011), B0110, B0111, B0111(B0111), ATM B1100(B1100), B1000, B1001, B1000(B1000), B0000, B0001, Transmission B1101(B1101), B1010, B1011, B1001(B1001), B0010, B0011, WRFDIntroduction Enumeration B1110(B1110), B1100, B1101, B1010(B1010), B0100, B0101, 050301 Package Type B1111(B1111) B1110, B1111 B1011(B1011), B0110, B0111, B1100(B1100), B1000, B1001, IP Transmission B1101(B1101), B1010, B1011, WRFDIntroduction on Enumeration B1110(B1110), B1100, B1101, 050409 Iu Interface Type B1111(B1111) B1110, B1111 SAALLNK, AAL2PATH, IPOAPVC SAALLNK, AAL2PATH, IPOAPVC
per cent
None
None
kbit/s
None
None
None
None
None
None
None
None
Enumeration Type
None
None
None
Enumeration Type
None
Load Based handover enhancement on Iur-g (3G to 2G) MBSC MRFD-211404 Handover based WRFDon Load Enumeration 071101 Enhancement Type
OFF(OFF), ON(ON)
OFF, ON
None
None
None
IP Address Type
None
None
None
IP Address Type
None
None
None
IP Address Type
None
WRFD010101
3GPP Specifications
0~268435455
None
String Type
None
WRFD050402
IP Transmission Introduction on IP Address Iub Interface Type IP Transmission Introduction on IP Address Iub Interface Type
None
WRFD050402
None
Enumeration Type
OFF(Unlock), ON(Lock)
OFF, ON
None
WRFD050402
1024~65535
None
Enumeration Type
None
WRFD040100
Flow Control
30~100
per cent
WRFD040100
Flow Control
30~100
per cent
WRFD050402
NO(NO), YES(YES)
WRFD050402
WRFD050402
WRFD040100
WRFD040100
WRFD040100
None
PFM_RESULT, IP Transmission HOST_PFM_RESUL Introduction on T, Iub Interface Interval Type 0~988 ACTIVE_DEF_MEAS _FILE, STANDBY_DEF_ME IP Transmission AS_FILE, Introduction on PFM_SWITCHS, Iub Interface Interval Type 0~5,8~27 HISTORY_ALARM, HISTORY_FAULT, ALM_SYSTEM_CFG, SECURITY_LOG, Flow Control Interval Type 30~100 OPT_LOG, OMU_LOG, BSC_CFG_MML, CELL_BASIC_INFO, BSC_SERIES_NO, Flow Control Interval Type 30~100 DB_BAK, MEM_DB_BAK, DEBUG_LOG, Enumeration LAST_WORD, Flow Control Type ON, OFF DSP_DEBUG_LOG, HOST_LOG, 3G_CHR_LOG, BSC_INFO, None Bit Field Type BIOS_LOG 180000000~1800000 Interval Type 00 NO_LOOP(No loop), REMOTE_LOOP(Re mote loop), LINE_REM_LOOP(Li ne remote loop), String Type None LOCAL_LOOP(Local loop), PAYLOAD_LOOP(pa Enumeration yload loop), Type OFF(OFF), ON(ON) SIN_CHN_LOC(singl e channel local loop), SIN_CHN_REM(singl Enumeration e channel remote Type loop)
PFM_RESULT, HOST_PFM_RES ULT,YES NO, None ACTIVE_DEF_ME AS_FILE, STANDBY_DEF_ MEAS_FILE, 0~988 PFM_SWITCHS, None HISTORY_ALAR M, HISTORY_FAULT , 0~5, 8~27 None ALM_SYSTEM_C FG, SECURITY_LOG, OPT_LOG, 30~100 per cent OMU_LOG, BSC_CFG_MML, CELL_BASIC_INF O, BSC_SERIES_NO per cent 30~100 , DB_BAK, MEM_DB_BAK, DEBUG_LOG, LAST_WORD, ON, OFF DSP_DEBUG_LO None G, HOST_LOG, 3G_CHR_LOG, BSC_INFO, BIOS_LOG None
degree
180:00:00.000~18 0:00:00.000 SEC NO_LOOP, REMOTE_LOOP, LINE_REMOTE_L OFF, ON None OOP, LOCAL_LOOP, PAYLOAD_LOOP , SIN_CHN_LOC, CIN_CHN_REM None
None
None
None
None
None
None
Enumeration Type
NO_LOOP(NO_LOO P), LOCAL_LOOP(LOCA L_LOOP), NO_LOOP, REMOTE_LOOP(RE REMOTE_LOOP, MOTE_LOOP) LOCAL_LOOP None NO_LOOP(No loop), LOCAL_LOOP(Local NO_LOOP, loop) LOCAL_LOOP
None
None
Enumeration Type
None
None
None
1~100
None
WRFD050408
0~988
None
None
None
None
None
None
None
0~7 None FG2a/GOUa/UOIa (IP) board:0~119;FG2 c board:0~489, 0~499, 512~767 None 512~767;GOUc board:0~499, 512~767;POUc(IP ) board:0~988, 1024~1535 None
None
None
0~499
None
WRFD050408
0~5, 8~27
None
None
None
Enumeration Type
None
30~100
per cent
30~100
per cent
30~100
per cent
30~100
per cent
None
None
0~5, 8~27
None
None
None
0~11
None
Enumeration Type
Enumeration Type
None
None
Enumeration Type
EXCLUDE(Exclude List Command), INCLUDE(Include List EXCLUDE, APPLICATION(Applic INCLUDE Command) None ation Program), HORIZONTAL(HORIZ SCNDCPU_PROG(S ONTAL), Thread econdary VERTICAL(VERTICA HORIZONTAL, Program), L) None BOOTROM(BOOTRO VERTICAL M Program), APPLICATION, DATA(Data file), SCNDCPU_PRO DSP(DSP Program), G, BOOTROM, FAN(Fan Program) DATA, DSP, FAN None OPTLOG(Operation Log), SECLOG(Security Log) OPTLOG(Operation Log), SECLOG(Security Log)
Enumeration Type
OPTLOG, SECLOG
None
Enumeration Type
OPTLOG, SECLOG
None
None
None
0~335
None
None
None
32~65535
None
None
None
0~4095
None
WRFD050409
1024~65535
None
WRFD010686
Enumeration Type
None
WRFD010686
Enumeration Type
D1, D2, D4, D8, D16, D32, D64, D128, 1, 2, 4, 8, 16, 32, D256, D512, 64, 128, 256, 512, INFINITY INFINITY None
WRFD010688
Enhanced CELL-FACH
4~1504
byte
WRFD010685
WRFD050425
MAP_HSUPA_TTI _2MS_SWITCH, Downlink MAP_HSUPA_TTI_2 MAP_INTER_RAT byte Enhanced L2 Interval Type 4~1504 4~1504 MS_SWITCH, _PS_IN_CHANLE MAP_INTER_RAT_P _LIMIT_SWITCH, S_IN_CHANLE_LIMI MAP_PS_BE_ON T_SWITCH, _E_FACH_SWITC Ethernet OAM Interval Type 0~499 None MAP_PS_BE_ON_E_ 0~499 H, FACH_SWITCH, MAP_PS_STREA MAP_PS_STREAM_ M_ON_E_FACH_ SAAL(SAAL Link ATM/IP Dual Enumeration ON_E_FACH_SWITC SWITCH, Type ), SCTP(SCTP H, Type) MAP_PS_STREA None Stack Node B Type Link SAAL, SCTP HSUPA 2ms TTI MAP_PS_STREAM_ M_ON_HSDPA_S Streaming ON_HSDPA_SWITC WITCH, Traffic Class on H, MAP_PS_STREA HSDPA MAP_PS_STREAM_ M_ON_HSUPA_S None String Type None Streaming ON_HSUPA_SWITC 1~20 characters None WITCH, Traffic Class on H, MAP_SRB_6800_ HSUPA MAP_SRB_6800_WH WHEN_RAB_ON_ Enhanced EN_RAB_ON_HSDS HSDSCH_SWITC CELL-FACH Bit Field Type CH_SWITCH H None
None
None
IP Address Type
None
None
None
IP Address Type
None
None
None
IP Address Type
None
None
None
IP Address Type
None
None
None
IP Address Type
None
WRFD020203
-50~33
dBm
WRFD010801
WRFD020203
TRUE(Configure the Interval Type -50~33 uplink -50~33 maximum power of UE), FALSE(Not configure Enumeration the maximum uplink Type power of UE) TRUE, FALSE
dBm
None
WRFD020801
Cell ID + RTT Function Based LCS Interval Type 1~100000 Cell ID + RTT Function Based LCS Interval Type 3~328080 IP Transmission Introduction on Iub Interface Interval Type 0~254 Inter Frequency Hard Handover Based on Coverage Interval Type 0~3 Inter-RAT Handover Based on Coverage 3.4/6.8/13.6/27. Interval Type 0~3 2 kbit/s RRC Connection and RAB Assignment Interval Type 0~256000000
1~100000
WRFD020801
3~328080
WRFD050402
0~254
None
WRFD020302
0~3
None
WRFD020303
0~3
None
WRFD010510
0~256000000
bit/s
WRFD020101
Admission Control
0~16000000
bit/s
None
WRFD020120
None Steering Interval Type 1~1562 Service and Load Sharing in RRC Connection Setup Steering Interval Type 0~255 Service and Load Sharing in RRC Connection Setup Interval Type 0~255 ATM Transmission Introduction Package
64~100000, step:64
kbit/s
0~255
None
WRFD020120
0~255
None
4~8
None
Intra RNC Softer Handover Inter RNC Soft Handover Interval Type 1~6
1~6
None
WRFD020900
D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, 0, 1, 2, 3, 4, 5, 6, D10, D11, D12, D13, 7, 8, 9, 10, 11, 12, D14, D15 13, 14, 15 None -24.5~0, step: 0.5 Actual value = (GUI value 49(offset))*0.5 dB
WRFD010688
Enhanced CELL-FACH
WRFD01061204
1~4
None
WRFD01061203
0~15
None
WRFD020101
Admission Control
0~48
None
Open Loop Power Control Interval Type -350~150 FP MUX for IP Transmission UDP MUX for Iu-CS Transmission
dB
24~1031
byte
WRFD020803
4~16
None
WRFD020101
Admission Control
0~100
None
WRFD020101
Admission Control
0~100
None
WRFD020102
Load Measurement
2~255
None
None
None
1~1500
byte
None
None
1~1500
None
Security MRFD-210305 Management 3.4/6.8/13.6/27. Interval Type 1~255 WRFD010510 2 kbit/s RRC Connection and RAB Assignment Interval Type 1~6 ATM Transmission Introduction Package
1~255
None
1~6
None
WRFD050301
0~10
None
10000~150000
None
WRFD050402
0~254
None
WRFD020501
dBm
WRFD050301
25~50(UNI), 250~500(NNI)
None
WRFD010505
1~60, step:1
None
None
1~746
byte
None
None
1~746
None
WRFD01061203
0~1, step:0.01
per cent
1~24
None
None
2~255
None
WRFD020501
dBm
WRFD020101
Admission Control
-50~33
dBm
WRFD020101
Admission Control
-50~33
dBm
WRFD020101
Admission Control
-50~33
dBm
WRFD020101
Admission Control
-50~33
dBm
WRFD020106
Load Reshuffling
1~3
None
WRFD020302
None
WRFD020302
0~15
None
None
0~511
None
WRFD050421
IP Address Type
None
WRFD020101
Admission ATM QoS Control Introduction on Interval Type 0~100 Hub NodeB (Overbooking on Hub Node B Transmission) Interval Type 0~100 MBMS Introduction Package
None
WRFD050406
0~100
per cent
WRFD010616
Enumeration Type
COMMON, MCCH
WRFD020106
Load Reshuffling MBMS Introduction Package FACH Transmission Sharing for MBMS MBMS Introduction Package
1~15
None
WRFD010616
1~10
min
WRFD010627
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None
WRFD010616
String Type
None
000~999
None
WRFD010616
MBMS MBMS Introduction FLC(Frequency Package String Type Layer Convergence)/F LD(Frequency Layer Enumeration Dispersion) Type
None
000~999
None
WRFD010626
FALSE, TRUE
FALSE, TRUE
None
WRFD020107
Overload Control
0~8
None
WRFD010505
Enumeration Type
OFF, ON
OFF, ON
None
WRFD01066001
MBMS Enhanced Enumeration Broadcast Mode Type MBMS Introduction Package MBMS Introduction Package MBMS Introduction Package
WRFD010616
0~65535
None
WRFD010616
0~16777215
None
WRFD010616
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None
0~8040000
kbit/s
Load Based Enumeration handover MBMS Phase 2 Type enhancement on Iur-g (3G to 2G) MBSC Load None None Interval Type Balancing MRFD-211402 MBSC MRFD-211404 Handover based WRFDon Load 071101 Enhancement Interval Type WRFD010660
3~10000
3~10000
byte
0~10
0~10
None
Load Based handover enhancement on Iur-g (3G to MRFD-211403 2G) Based Load WRFDMBSC Service handover 071101 Distribution Interval Type -100~100 enhancement Load Based on Iur-g (3G to handover MRFD-211403 2G) enhancement WRFDMBSC Service on Iur-g (3G to 071101 Distribution Interval Type -100~100 2G) MBSC Load Based MRFD-211404 Handover based handover WRFDon Load Enumeration enhancement 071101 Enhancement Type OFF(OFF), ON(ON) on Iur-g (3G to 2G) WRFDNACC Load Based 071101 Procedure handover MRFD-211401 Optimization enhancement MRFD-211402 on Iur-g (3G to MRFD-211403 2G) WRFDMBSC Service 071101 Distribution MOCN Introduction Package Inter-RAT Handover Based on Coverage Enumeration Type
-100~100
None
-100~100
None
OFF, ON
None
Enumeration Type
None
None
WRFD021311
String Type
None
000~999
None
WRFD020303
String Type
None
3 digits
None
WRFD010101
3GPP Specifications MBMS Introduction Package MBMS Introduction Package MBMS Introduction Package
String Type
None
000~999
None
WRFD010616
0~3
None
WRFD010616
7~10
None
WRFD010616
0~3
None
None
None
4, 8
None
None
None
30~70754
None
WRFD050425
Ethernet OAM
0~7
None
None
String Type
None
1~20 characters
None
WRFD020303
Enumeration Type
None
WRFD050425
Ethernet OAM
1~1000
None
WRFD050425
Ethernet OAM
Enumeration Type
None
None
None MBMS Introduction Package MBMS Introduction Package MBMS Introduction Package
Enumeration Type
LONG(LONG), SHORT(SHORT)
LONG, SHORT
None
WRFD010616
0~255
None
WRFD010616
-10~5
dB
WRFD010616
Enumeration Type
FALSE, TRUE
None
None
None
64~100000, step:64
kbit/s
WRFD020900
D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, 0, 1, 2, 3, 4, 5, 6, D10, D11, D12, D13, 7, 8, 9, 10, 11, 12, D14, D15 13, 14, 15 None
WRFD010510
None
AMR/WB-AMR Enhanced Speech Rates CELL-FACH Interval Type 0~49 Control Inter-RAT Dynamic Handover Channel Based on DL Configuration QoS (DCCC) Interval Type 1~60 Control Inter-RAT Dynamic Handover Channel Based on DL Configuration QoS (DCCC) Interval Type 1~60 Control Inter-RAT Handover Based on DL QoS
1~60
min
1~60
min
1~60
min
WRFD020102
Load Measurement
1~60
min
WRFD020102
Load Measurement
1~60
min
WRFD020102
Load Measurement
1~60
min
WRFD020102
Load Measurement
1~60
min
WRFD020102
Load Measurement
1~60
min
WRFD020102
Load Measurement
1~60
min
WRFD020102
Load Measurement
1~60
min
WRFD020304
Inter Frequency Hard Handover Based on DL QoS Interval Type 1~60 IMA for E1T1 or Channelized STM-1/OC-3 on Iub Interface Interval Type 1~32
1~60
min
WRFD050304
1~32
None
WRFD020501
dBm
WRFD050421
10~1000
ms
WRFD050421
IP Re-route Based on BFD/ARP 3.4/6.8/13.6/27. Interval Type 10~1000 2 kbit/s RRC Connection and RAB Enumeration Assignment Type SF4, SF8, SF16, SF32, SF64
10~1000
ms
WRFD010510
None
None
None
0~11
None
None
None
0~11
None
None
None System Information Broadcasting MOCN Introduction Package Inter-RAT Handover Based on Coverage
Enumeration Type
None
WRFD010401
1~32
None
WRFD021311
String Type
None
00~99, 000~999
None
WRFD020303
String Type
None
2~3 digits
None
WRFD010101
WRFD021311
LLOWED_SWITC H, SPARE_1_SWITC COMM_MOCN_NRI_ H, GLOBAL_CONFIG_M SPARE_2_SWITC ODE_SWITCH, H, COMM_MIB_MULTI_ SPARE_3_SWITC PLMN_LIST_ALLOW H, ED_SWITCH, SPARE_4_SWITC SPARE_1_SWITCH, H, String Type None SPARE_2_SWITCH, 00~99, 000~999 None SPARE_3_SWITCH, SPARE_5_SWITC SPARE_4_SWITCH, H, SPARE_5_SWITCH, SPARE_6_SWITC Bit Field Type SPARE_6_SWITCH H None
WRFD021311
Enumeration Type
Enumeration MRFD-210502 BSC/RNC Clock Type IP Transmission Introduction on Enumeration Iub Interface Type
NO, YES MANUAL(Manual Handover), AUTO(Auto Handover), FREE(Free-run) SERVER(SERVER MOD), CLIENT(CLIENT MOD)
NO, YES
None
WRFD050402
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None
Enumeration Type
None
Enumeration Type
MODE1(1:1 GO(GSM),Switching), Protection UO(UMTS), GU(GSM MODE2(1+1 and UMTS) GO, UO, GU None Unidirectional Protection Switching), MODE3(1+1 CHECK_ON_IND Bidirectional CHECK_ON_INDEPE MODE1, MODE2, EPENDENT_POR Protection Switching) MODE3 None NDENT_PORT, T, CHECK_ON_PRIMA RY_PORT, CHECK_ON_STAND BY_PORT CHECK_ON_PRI MARY_PORT, CHECK_ON_STA NDBY_PORT None
WRFD050421
Enumeration Type
WRFD05030104
Dynamic AAL2 Connections in Iub/IuCS/Iur Interface Interval Type 5000~30000 Dynamic AAL2 Connections in Iub/IuCS/Iur Interface Interval Type 5000~30000
5000~30000
ms
WRFD05030104
5000~30000
ms
WRFD040100
Flow Control
40~60000
ms
WRFD021101
None
None
None
None
WRFD050301
MPS_EMERGENCY( Interval Type 0~167 MPS_EMERGENCY), MPS_NORMAL(MPS _NORMAL), Enumeration MPS_NEUTRAL(MP Type S_NEUTRAL)
0~167
None
None
None
Enumeration Type
MLPPP, MCPPP
MLPPP, MCPPP
None
0~27
None
0~11
None
WRFD010660
OFF(OFF), ON(ON)
OFF, ON
None
WRFD010660
WRFD011001
Any Type
WRFD011001
Enumeration Type
None
None
Enumeration Type
OFF(OFF), ON(ON) CLEAR(Cleared), LOP(Lockout of Protection), FS(Forcibly None switchover working link to protection link), OFF(Message is MS(Manual invalid), ON(Message switchover from is valid) link to working protection link), EXERS(Exercisely switch working link to protection link)
OFF, ON
None
OFF, ON
None
None
None
Enumeration Type
ON(ON), OFF(OFF)
ON, OFF
None
WRFD020101
Admission Control
0~1, step:0.01
per cent
WRFD020101
Admission Control
0~63
None
WRFD01061603
per cent
WRFD01061603
per cent
WRFD010660
D16, D32, D64, D128, 16, 32, 64, 128, D256 256
kbit/s
WRFD010660
True, False
TRUE, FALSE
None
WRFD020101
Admission Control
0~1, step:0.01
per cent
WRFD020101
Admission Control
0~63
None
Enumeration Type
MET(Metric), IMP(Imperial)
MET, IMP
None
WRFD020801
None
WRFD050402
500~1500
None
None
None
776~1696
byte
None
None
256~1650
byte
None
None
1~1500
ls
None FP MUX for IP Interval Type 1~1500 Transmission UDP MUX for Iu-CS Enumeration Transmission Type FPMUX, UDPMUX IP Re-route Based on BFD/ARP ATM Transmission Introduction Package
1~1500
ls
FPMUX, UDPMUX
None
WRFD050421
WRFD050301
10~2000
None
WRFD010101
3GPP Specifications
0~7
None
WRFD010101
3GPP Specifications
0~7
None
WRFD010101
3GPP Specifications
0~7
None
WRFD010101
3GPP Specifications
Interval Type 1~8 D1, D2, D4, D10, D20, D50, D100, D200, D400, D600, D800, D1000
WRFD010101
3GPP Specifications
Enumeration Type
1~8 D2, D4, D10, None D1, D20, D50, D100, D200, D400, D600, D800, D1000 None
WRFD010101
3GPP Specifications
Enumeration Type
D1, D2, D4, D10, D20, D50, D100, D200 D1, D2, D4, D10, D20, D50, D100, D200, D400, D600, D800, D1000
D1, D2, D4, D10, D20, D50, D100, D200 D4, D10, None D1, D2, D20, D50, D100, D200, D400, D600, D800, D1000
WRFD010101
3GPP Specifications
Enumeration Type
None
WRFD010101
3GPP Specifications ATM Transmission Introduction Package ATM Transmission Introduction Package ATM Transmission Introduction Package ATM Transmission Introduction Package ATM Transmission Introduction Package
Enumeration Type
None
WRFD050301
String Type
None
1~49 characters
None
WRFD050301
String Type
None
1~49 characters
None
WRFD050301
String Type
None
1~31 characters
None
WRFD050301
String Type
None
1~31 characters
None
WRFD050301
String Type
None
1~31 characters
None
None
None
String Type
None
1~31 characters
None
WRFD050409
IP Transmission Introduction on Iu Interface String Type IP Transmission Introduction on Iu Interface String Type IP Transmission Introduction on Iu Interface String Type
None
1~49 characters
None
WRFD050409
None
1~49 characters
None
WRFD050409
None
1~31 characters
None
WRFD050409
IP Transmission Introduction on Iu Interface String Type IP Transmission Introduction on Iu Interface String Type System Information Broadcasting System Information Broadcasting
None
1~49 characters
None
WRFD050409
None
1~31 characters
None
WRFD010401
0~50
frame
WRFD010401
0~50
frame
WRFD040100
Flow Control
1~200
None
WRFD050402
1024~65535
None
WRFD031101
DHCP
IP Address Type
None
WRFD031101
DHCP
IP Address Type
None
WRFD040100
Flow Control
1~200
None
WRFD031101
DHCP
IP Address Type
None
WRFD031101
DHCP
IP Address Type
None
WRFD031101
DHCP
String Type
None
1~30 characters
None
WRFD031101
DHCP
WRFD020101
Admission Control
WRFD020101
Admission Control
WRFD020106
Load Reshuffling
TRL, CRD_ADCTRL, MBMS_UU_ADCT HSDPA_UU_ADCTR RL, L, HSDPA_GBP_ME HSUPA_UU_ADCTR AS, L, HSDPA_PBR_ME MBMS_UU_ADCTRL, AS, DOFFC, HSDPA_GBP_MEAS, HSUPA_PBR_ME HSDPA_PBR_MEAS, AS, DOFFC, HSUPA_EDCH_R String Type None HSUPA_PBR_MEAS, 1~30 characters None SEPS_MEAS, HSUPA_EDCH_RSE EMC_UU_ADCTR ALGORITHM_OF INTRA_FREQUE PS_MEAS, L, F, EMC_UU_ADCTRL, NCY_LDB, PUC, FACH_UU_ADCT ALGORITHM_FIR UL_UU_LDR, Bit Field Type FACH_UU_ADCTRL RL None ALGORITHM_OFF, ST, INTRA_FREQUENCY DL_UU_LDR, ALGORITHM_FIRST, ALGORITHM_SE _LDB, PUC, UL_UU_OLC, ALGORITHM_SECO COND, UL_UU_LDR, DL_UU_OLC, Enumeration ND, ALGORITHM_THI DL_UU_LDR, NBM_LDC_ALL_UE( OLC_EVENTMEA None Type ALGORITHM_THIRD RD UL_UU_OLC, S, Select all users), DL_UU_OLC, NBM_LDC_MATCH_ CELL_CODE_LD OLC_EVENTMEAS, R, UE_ONLY(Select CELL_CODE_LDR, CELL_CREDIT_L users match target NBM_LDC_ALL_ Bit Field Type CELL_CREDIT_LDR DR None cell support only), UE, NBM_LDC_MATC H_UE_ONLY, NBM_LDC_MATC H_UE_FIRST PRIORITY1, PRIORITY2, ALGORITHM_RE ALGORITHM_OF PRIORITY3, QUIRED, F, PRIORITY4, ALGORITHM_DE ALGORITHM_FIR PRIORITY5, PEND_ON_LCG ST, PRIORITY6, ALGORITHM_SE PRIORITY7, COND, PRIORITY8, ALGORITHM_THI PRIORITY9, RD PRIORITY10, PRIORITY11, PRIORITY12, PRIORITY13, PRIORITY14,
WRFD020103
WRFD020101
WRFD020101
WRFD021104
NBM_LDC_MATCH_ UE_FIRST(Select Inter Frequency Enumeration users match target Load Balance Type cell support first) PRIORITY1, PRIORITY2, ALGORITHM_REQUI PRIORITY3, RED, PRIORITY4, Admission Enumeration ALGORITHM_DEPE PRIORITY5, Control Type ND_ON_LCG ALGORITHM_OFF, PRIORITY6, ALGORITHM_FIRST, PRIORITY7, ALGORITHM_SECO PRIORITY8, Admission Enumeration ND, PRIORITY9, Control Type ALGORITHM_THIRD PRIORITY10, PRIORITY11, PRIORITY12, PRIORITY13, ALGORITHM_OFF(W Emergency Call Bit Field Type PRIORITY14 Switch PS Algorithm Enumeration Emergency Call Type Load Based handover enhancement on Iur-g (3G to 2G) Interval Type 1~32 Inter-RAT Handover Based on Coverage
None
None
None
None
WRFD021104
WRFD071101
1~32
None
WRFD020303
0~32
None
WRFD040100
Flow Control
1~200
None
WRFD031101
Enumeration Type
ATMTRANS_IP(ATM TRANS_IP), IPTRANS_IP(IPTRAN S_IP), ATMTRANS_IP, ATMANDIPTRANS_I IPTRANS_IP, P(ATMANDIPTRANS ATMANDIPTRAN _IP) S_IP None
0~7
None
Intra RNC Softer Handover Inter RNC Soft Handover Interval Type 0~65535 Multi-Carrier Switch off Based on Traffic Load Interval Type 0~100 Intra RNC Softer Handover Inter RNC Soft Handover Interval Type 0~4095 Inter-RAT Handover Based on Coverage
0~65535
None
0~1, step:0.01
per cent
0~4095
None
WRFD020303
Enumeration Type
None
MBMS Inter-RAT Enhanced Handover Broadcast Mode Interval Type 2~10 Based on Service Inter-RAT Handover Enumeration Based on Load Type
2~10
None
OFF, ON
OFF, ON
None
WRFD010801
1~16
None
WRFD050301
Enumeration Type
None
None
None
IP Address Type
None
None
None
IP Address Type
None
None
None HCS (Hierarchical Cell Structure) ATM Transmission Introduction Package Physical Channel Management
IP Address Type
None
WRFD021200
1~16
None
WRFD050301
Enumeration Type
None
WRFD022000
1~256
None
WRFD010101
3GPP Specifications
Enumeration Type
MODE1, MODE2
WRFD021302
Iu Flex
0~60
40~45
55~59
40~45
55~59
40~45
55~59
40~45
55~59
40~45
55~59
40~45
55~59
None
Interval Type
0 None
WRFD01061003
0~3840
None
WRFD01061202
0~3840
None
WRFD05030104
0~65535
None
WRFD031101
DHCP
0~65535
None
None
None
0~65535
None
WRFD010101
3GPP Specifications
0~65535
None
None
None
WRFD020106
Load Reshuffling
Interval Type 0~3 IUB_LDR, NODEB_CREDIT_LD R, LCG_CREDIT_LDR, Bit Field Type IUB_OLC
None
None
String Type
None
1~64 characters
None
None
None
String Type
None
1~64 characters
None
WRFD010101
3GPP Specifications
Enumeration Type
WRFD031101
DHCP
Enumeration Type
ETH/TRUNK, PPP/MP
ETH/TRUNK, PPP/MP
None
None
None
1~60
None
None
None
Enumeration Type
PERIOD, EVENT
None
None
None
None
None
0~2
None
None
None
Enumeration Type
BASE_BOARD, CH_STM1, E1
BASE_BOARD, CH_STM1, E1
None
WRFD050105
WRFD010101
WRFD010101
WRFD05030104
WRFD010510
NORMAL(Normal), PICO_TYPE1(Pico ATM Switching type 1), NORMAL, Based Hub Enumeration PICO_TYPE2(Pico PICO_TYPE1, Node B Type type 2) PICO_TYPE2 IUB(Iub Interface), IUR(Iur Interface), IUCS(Iu-CS 3GPP Interface), IUPS(Iu- 5~1440, step:5 Specifications Interval Type 1~288 PS Interface), UNI_AAL2SWITCH(th e adjacent node of 3GPP Compound 00:00:00~23:59:5 the ATM switch on IUB, IUR, IUCS, Specifications Type hour, min, sec 9 the Iub interface), IUPS, Dynamic AAL2 NNI_AAL2SWITCH(th UNI_AAL2SWITC Connections in e adjacent node of H, Iub/IuCS/Iur Enumeration ATM switch on Iur or NNI_AAL2SWITC Interface Iu-CS interface) H 3.4/6.8/13.6/27. Type 2 kbit/s RRC Connection and RAB Enumeration PICO_TYPE1, PICO_TYPE1, Assignment Type PICO_TYPE2 PICO_TYPE2
None
min
None
None
WRFD010801
Enumeration Type
WRFD01061203
0~1, step:0.01
per cent
1~256
None
Intra RNC Softer Handover Inter RNC Soft Handover Interval Type 0~30 Inter Frequency Hard Handover Based on Coverage Interval Type 0~63 Inter-RAT Handover Based on Coverage
0~30
None
WRFD020302
0~63
None
0~31
None
Intra RNC Softer Handover Inter RNC Soft Enumeration Handover Type
FALSE, TRUE
FALSE, TRUE
None
WRFD01066001
1~5
None
None
None
1~10
None
WRFD021302
Iu Flex
0~1023
None
WRFD010101
3GPP Specifications
0~4095
None
WRFD040202
0~4095
None
None
0~4095
None
WRFD050301
Any Type
None
None
None
WRFD010101
3GPP Specifications
Any Type
None
ATM address
None
WRFD010101
3GPP Specifications HCS (Hierarchical Cell Structure) Iu Flex Load Distribution Management
Any Type
None
42 characters
None
WRFD021200
1~16
None
WRFD021306
0~1023
None
WRFD020114
1~16
None
WRFD020114
1~16
None
None
None
0~100
per cent
None
None
0~100
per cent
None
None
0~100
per cent
None
None
0~100
per cent
0~100
per cent
None
None
0~63
None
None
None
Enumeration Type
Enumeration Type
ALL(Shield by Alarm OFF(OFF), ON(ON) OFF, ON ID), BOARD(Shield by Board), PORT(Shield by Port), DSP(Shield by ALL, BOARD, DSP) PORT, DSP
None
None
WRFD020105
-20~20
dB
WRFD020105
-20~20
dB
WRFD020105
-20~20
dB
WRFD020105
-20~20
dB
WRFD020105
-20~20, step:2
dB
WRFD020105
-20~20, step:2
dB
WRFD020107
Overload Control
100~86400000
ms
None
None
IP Address Type
None
None
None
IP Address Type
None PRIM(Primary Operator), SEC(Secondary None Operator), OUTER(Outer Operator), COMM(Common Operator)
String Type
1~32 characters
None
WRFD021311
Enumeration Type
None
Cell ID + RTT Function Based Enumeration None Type LCS OTDOA Based LCS A-GPS Based LCS Bit Field Type
TRCH_DCH, TRCH_DCH, TRCH_HSDSCH R5_POSDATA_SWIT TRCH_HSDSCH None R5_POSDATA_S CH, WITCH, LAST_KNOWN_SER LAST_KNOWN_S VICE_AREA_SWITC ERVICE_AREA_S H WITCH None
None
None
Enumeration Type
SDH, SONET
SDH, SONET
None
WRFD020801
0~179
degree
Enumeration Type
One_touch, Step_by_Step
None
WRFD020802
WRFD020802
None
WRFD020203
Enumeration Type
FORBIDDEN, NOT_FORBIDDEN
WRFD05030104
Dynamic AAL2 Connections in Iub/IuCS/Iur Enumeration Interface Type ATM Transmission Introduction Package
WRFD050301
Enumeration Type
NO(ATM_ADDRESS _DOES_NOT_BELO PEER(PEER), NG_TO_THIS_ADJA LOCAL(LOCAL) PEER, LOCAL CENT_NODE), YES(ATM_ADDRESS _BELONGS_TO_THI S_ADJACENT_NOD E) NO, YES
None
None
WRFD040100
Flow Control
30~100
per cent
WRFD040100
Flow Control
30~100
per cent
WRFD040100
Flow Control
Enumeration Type
ON, OFF
ON, OFF
None
WRFD050402
None
WRFD05030104
Dynamic AAL2 Connections in Iub/IuCS/Iur Interface Interval Type 1~4294967295 IP Transmission Introduction on Iub Interface Interval Type 0~65535
1~4294967295
None
WRFD050402
0~65535
None
None
None
Interval Type
None
None
Interval Type
None
None
Interval Type
WRFD050402
Enumeration Type
WRFD020501
Interval Type
WRFD020501
Interval Type
Intra Frequency Load Balance Interval Type Outer Loop Power Control Inner Loop None Control Interval Type Power Downlink Power Balance HSUPA Power Control Bit Field Type
AF21(AF21), AF22(AF22), AF23(AF23), AF31(AF31), AF32(AF32), QoS, BE, AF11, AF33(AF33), AF12, AF13, AF41(AF41), AF21, AF22, AF42(AF42), AF23, AF31, AF43(AF43), EF(EF), AF32, AF33, LQ_QOS(LQ_QOS), AF41, AF42, 1~4294967295 1~4294967295 None LQ_BE(LQ_BE), AF43, EF, LQ_AF11(LQ_AF11), LQ_QOS, LQ_BE, LQ_AF12(LQ_AF12), LQ_AF11, LQ_AF13(LQ_AF13), LQ_AF12, LQ_AF21(LQ_AF21), 0~65535 LQ_AF13, 0~65535 None LQ_AF22(LQ_AF22), LQ_AF21, LQ_AF23(LQ_AF23), LQ_AF22, LQ_AF31(LQ_AF31), LQ_AF23, LQ_AF32(LQ_AF32), PC_AMR_MODE_ LQ_AF31, 1~4294967295 INDUCE_BLER_A None LQ_AF33(LQ_AF33), 1~4294967295 LQ_AF32, LQ_AF41(LQ_AF41), LTER_SWITCH, LQ_AF33, PC_AMR_MODE_IN PC_DL_INNER_L LQ_AF42(LQ_AF42), LQ_AF41, MAINCPU_PATCH(M DUCE_BLER_ALTER OOP_PC_ACTIVE LQ_AF43(LQ_AF43), LQ_AF42, ain programme _SWITCH, _SWITCH, LQ_EF None LQ_EF(LQ_EF) LQ_AF43, patch), PC_DL_INNER_LOO PC_DOWNLINK_ DSP_PATCH(DSP P_PC_ACTIVE_SWIT POWER_BALANC programme patch), MAINCPU_PATC CH, E_SWITCH, UCODE_PATCH(Mar H, DSP_PATCH, PC_DOWNLINK_PO PC_EFACH_ECN crocode patch) WER_BALANCE_SW UCODE_PATCH None 0_DYN_ADJ_SWI ITCH, TCH, PC_EFACH_ECN0_D PC_FP_MULTI_R YN_ADJ_SWITCH, LS_IND_SWITCH, PC_FP_MULTI_RLS_ PC_HSUPA_HAR dB -350~150 -35~15, step: 0.1 IND_SWITCH, QNUM_AUTO_AD PC_HSUPA_HARQN JUST_SWITCH, UM_AUTO_ADJUST PC_HSUPA_PO_ _SWITCH, UPDATE_SWITC -100~500 PC_HSUPA_PO_UP -10~50, step: 0.1 dBm H, DATE_SWITCH, PC_INNER_LOO PC_INNER_LOOP_L P_LMTED_PWR_I MTED_PWR_INC_S NC_SWITCH, WITCH, PC_OLPC_SWIT dB 0~100 0~10, step:0.1 PC_OLPC_SWITCH, CH, PC_RL_RECFG_SIR PC_RL_RECFG_ _TARGET_CARRY_ SIR_TARGET_CA SWITCH, RRY_SWITCH, 30~353207 PC_SIG_DCH_OLPC 30~353207 PC_SIG_DCH_OL None _SWITCH, PC_SWITCH, PC_UL_SIRERR_HI PC_UL_SIRERR_ GH_REL_UE_SWITC HIGH_REL_UE_S H WITCH None
WRFD050409
1~10
WRFD040202
0~65535
None
None
None
IP Address Type
None
None
IP Address Type
None
WRFD050421
IP Address Type
None
None
None
IP Address Type
None
WRFD050402
IP Transmission Introduction on IP Address Iub Interface Type IP Transmission Introduction on IP Address Iub Interface Type IP Transmission Introduction on IP Address Iub Interface Type
None
WRFD050402
None
WRFD050402
None
None
None
IP Address Type
None
None
None
IP Address Type
None
None
None
IP Address Type
None
WRFD040202
Enumeration Type
INVALID(Invalid), VALID(Valid)
Valid, Invalid
None
WRFD050402
None
WRFD040202
0~65535
None
WRFD050402
1024~65535
None
WRFD040202
RNC Node Redundancy Load Based handover enhancement on Iur-g (3G to 2G) Based Load handover enhancement on Iur-g (3G to 2G) Based Load handover enhancement on Iur-g (3G to 2G)
0~4095
None
WRFD071101
0, 2, 4, 6, 8, 10, 0,2,4,6,8,10,12,14,16, 12, 14, 16, 18, 20, Interval Type 18,20,22,24,26 22, 24, 26 None
WRFD071101
0~11
None
WRFD071101
0~3
None
Inter-RAT Enumeration Handover None on Type IUB, IUPS, OTHER Based Service Inter-RAT Handover Based on Load Interval Type 0~65535 Inter-RAT Handover Based on Coverage
None
0~65535
WRFD020303
0~300
WRFD021101
Dynamic Channel Configuration Enumeration Control (DCCC) Type Dynamic Channel Configuration Enumeration Control (DCCC) Type
D250, D500, D1000, 250, 500, 1000, D2000, D4000, 2000, 4000, 8000, D8000, D16000 16000 ms D250, D500, D1000, 250, 500, 1000, D2000, D4000, 2000, 4000, 8000, D8000, D16000 16000 ms
WRFD021101
WRFD040100
Flow Control
0~1000
None
WRFD040100
Flow Control
0~1000
None
WRFD050402
IP Transmission Introduction on Iub Interface Interval Type 1~60 Inter Frequency Hard Handover Based on Coverage Interval Type 1~64 HCS (Hierarchical Cell Structure) Inter-RAT Handover Inter-RAT Based on Handover Coverage Based on
1~60
WRFD020302
500~32000, step:500
ms
WRFD021200
500~32000, step:500
ms
500~32000, step:500
ms
Service Inter-RAT Handover Based on Load Interval Type 1~64 Intra RNC Softer Handover Inter RNC Soft Enumeration Handover Type Intra RNC Softer Handover Inter RNC Soft Enumeration Handover Type Intra RNC Softer Handover Inter RNC Soft Enumeration Handover Type
500~32000, step:500
ms
D1, D2, D4, D8, D16, 1, 2, 4, 8, 16, 32, D32, D64, INFINITY 64, INFINITY
None
D1, D2, D4, D8, D16, 1, 2, 4, 8, 16, 32, D32, D64, INFINITY 64, INFINITY
None
D1, D2, D4, D8, D16, 1, 2, 4, 8, 16, 32, D32, D64, INFINITY 64, INFINITY
None
WRFD020102
Interval Type 2~65535 D0.9, D0.8, D0.7, D0.6, D0.5, D0.4, D0.3, D0.2
2~65535
None
WRFD010401
Enumeration Type
None
None
None
Enumeration Type
Disable(Disable), Enable(Enable)
Disable, Enable
None
None
None
Enumeration Type
IP Transmission Introduction on Enumeration Iub MUX for IP Type FP Interface Transmission UDP MUX for Iu-CS Transmission
BE(BE), AF11(AF11), AF12(AF12), AF13(AF13), AF21(AF21), AF22(AF22), AF23(AF23), Disable(Disable), AF31(AF31), Enable(Enable) AF32(AF32), AF33(AF33), AF41(AF41), AF42(AF42), AF43(AF43), EF(EF) BE, AF11, AF12,
BE, AF11, AF12, Disable, Enable AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, BE, AF11, AF12, AF42, AF43, EF AF13, AF21,
None
None
AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, Bit Field Type AF43, EF
WRFD021103
0~255
None
WRFD010101
3GPP Specifications
0~255
None
WRFD010101
3GPP Specifications
0~255
None
WRFD010101
3GPP Specifications
0~255
None
WRFD010101
3GPP Specifications
0~255
None
WRFD010101
3GPP Specifications
0~255
None
WRFD010101
3GPP Specifications
0~255
None
WRFD010101
3GPP Specifications
0~255
None
WRFD010101
3GPP Specifications
0~255
None
WRFD010101
3GPP Specifications
1~255
None
WRFD010101
0~255
None
WRFD010301
None
WRFD020501
-10~5
dB
None
None
0~27
None
Enumeration Type
DISABLE(Disabled), ENABLE(Enabled)
DISABLE, ENABLE
None
WRFD050425
Ethernet OAM
5~64
None
WRFD050425
Ethernet OAM
64~1024
byte
None
None
10~1500
bit
None
None
20~1500
byte
None
None
95~512
byte
WRFD010101
3GPP Specifications
1~256
None
WRFD010101
3GPP Specifications
1~256
None
None
None
100~10000, step:100
ms
None
None
0~1, step:0.001
None
WRFD040100
Flow Control
30~100
per cent
WRFD040100
Flow Control
30~100
per cent
WRFD040100
Flow Control
30~100
per cent
WRFD040100
Flow Control
30~100
per cent
WRFD040100
Flow Control
Enumeration Type
ON, OFF
ON, OFF
None
0~11
None
1~32
None
0~335
None
None
None
0~7
None
WRFD05030101
None
None
None
None
0~31(AEUa/PEUa ), 0~125(E1 of AOUa/POUa), 0~167(T1 of AOUa/POUa), 0~31(AEUa/PEUa 0~251(E1 of of ), 0~125(E1 AOUc/POUc), AOUa/POUa), 0~335(T1 of 0~167(T1 of AOUc/POUc) None AOUa/POUa), 0~31(AEUa/PEUa 0~251(E1 of of ), 0~125(E1 AOUc/POUc), AOUa/POUa), 0~335(T1 of 0~167(T1 of AOUc/POUc) None AOUa/POUa), 0~251(E1 of AOUc/POUc), 0~335(T1 of AOUc/POUc) None
None
None
0~7
None
None
None
0~11
None
None
None
WRFD05030102
None
None
None
None
None
None
None
None
None
None
WRFD010101
3GPP Specifications
0~65535
None
String Type
None
String Type
None
WRFD010505
10~800, step:10
ms
WRFD050301
500~10000(UNI), 90~500(NNI) ms
None
None
21~65535
None
None
None
Enumeration Type
IP, ATM
IP, ATM
None
WRFD050425
Ethernet OAM
Enumeration Type
ETHER, TRUNK
ETHER, TRUNK
None
Enumeration Type
CLOSE(Close), OPEN(Open)
CLOSE, OPEN
None
Enumeration Type
CLOSE(Close), OPEN(Open)
CLOSE, OPEN
None
Enumeration Type
CLOSE(Close), OPEN(Open)
CLOSE, OPEN
None
Enumeration Type
CLOSE(Close), OPEN(Open)
CLOSE, OPEN
None
Enumeration Type
CLOSE(Close), OPEN(Open)
CLOSE, OPEN
None
Enumeration Type
CLOSE(Close), OPEN(Open)
CLOSE, OPEN
None
WRFD020501
-5~10
dB
WRFD020501
1~8
dB
None
None
0~499
None
None
None
0~499
None
None
None
0~499
None
None
None
Enumeration Type
Disable(Disable), Enable(Enable) NON_PERIODIC_RE PORT(Non periodical reporting), D250~1 0~5 D500~2 D1000~3 D2000~4 D3000~5 SIGNATURE0, D4000~6 D6000~7 SIGNATURE1, D8000~8 D12000~9 0~255 SIGNATURE2, D16000~10 SIGNATURE3, D20000~11 SIGNATURE4, D24000~12 SIGNATURE5, D28000~13 SIGNATURE6, D32000~14 D64000 SIGNATURE7, SIGNATURE8, SIGNATURE9, SIGNATURE10, 1~64 SIGNATURE11, SIGNATURE12, SIGNATURE13, SIGNATURE14, SIGNATURE15
Disable, Enable
None
None
None
Interval Type
0~5 SIGNATURE0, NON_PERIODIC_ SIGNATURE1, REPORT, 250, SIGNATURE2, 500, 1000, 2000, 0~2554000, 6000, SIGNATURE3, 3000, SIGNATURE4, 8000, 12000, SIGNATURE5, 16000, 20000, SIGNATURE6, 24000, 28000, SIGNATURE7, 32000, 64000 SIGNATURE8, SIGNATURE9, SIGNATURE10, SIGNATURE11, 1~64 SIGNATURE12, SIGNATURE13, SIGNATURE14, SIGNATURE15. (Multiple options.)
None
WRFD010101
3GPP Specifications
Interval Type
None
WRFD020302
ms
WRFD020501
Interval Type
None
WRFD020501
None
WRFD010505
Enumeration Type
OFF, ON
OFF, ON
None
WRFD010505
Enumeration Type
OFF, ON
OFF, ON
None
WRFD040100
Flow Control
30~100
per cent
WRFD040100
Flow Control
30~100
per cent
WRFD040100
Flow Control
30~100
per cent
WRFD040100
Flow Control
30~100
per cent
WRFD040100
Flow Control ATM Transmission Introduction Package ATM Transmission Introduction Package
Enumeration Type
ON, OFF
ON, OFF
None
WRFD050301
0~99
None
WRFD050301
0~99
None
None
None
Enumeration Type
HIGH, LOW
None
WRFD020101
Admission Control Traffic Priority Mapping on Transport Service Differentiation based on SPI weight
Enumeration Type
WRFD050424
Enumeration Type
ARP, TrafficClass
WRFD020806
0~7
None
WRFD020806
Service Differentiation based on SPI weight Service Differentiation based on SPI weight Service Differentiation based on SPI weight Service Differentiation based on SPI weight
Interval Type
WRFD020806
Interval Type
WRFD020806
Interval Type
WRFD020806
Interval Type
String Type
WRFD020114
WRFD010101
3GPP Specifications
INVOKE_TRACE_S WITCH, SYS_INFO_UPDATE _FOR_IU_RST, DRNC_DIRECT_DSC 0~7 0~7 R, RNC_SHARE_SWIT CH, RNCAP_IMSI_HO_S 0~7 0~7 WITCH, TERMINAL_VERSIO N_DEBASE_SWITCH , SYS_HO_OUT_CIPH 0~7 0~7 ER_SWITCH, SYS_HO_CIPHER_C ONFIG, BARRED_CELL_FO 0~7 R_CSDOMAIN_RST, 0~7 CR2284R1_SWITCH, CDT_MSG_FULL_TR ACE, CR2284R1_COMPAT 0~200 characters None IBLE_SWITCH, COMBINE_OPERATI ON_DRD_SWITCH, UL_INTER_PROTEC 2~30 2~30 T_SWITCH, UPLINK_MDC_ENHE This parameter is NCEMENT_SWITCH, set to 0 or 1 NODEB_PRIVATE_I according to the NTERFACE_SWITCH related domains. ITUT(ITUT), ANSI(ANSI), TTC(TTC)
None
None
None
None
None
min
None
WRFD050301
WRFD010510
2 kbit/s RRC Connection and RAB Assignment 3.4/6.8/13.6/27. Interval Type 0~60 2 kbit/s RRC Connection and RAB Assignment 3.4/6.8/13.6/27. Interval Type 0~60 2 kbit/s RRC Connection and RAB Assignment 3.4/6.8/13.6/27. Interval Type 0~60 2 kbit/s RRC Connection and RAB Assignment Interval Type 0~60
0~60
WRFD010510
0~60
WRFD010510
0~60
WRFD010510
0~60
WRFD010510
3.4/6.8/13.6/27. 2 kbit/s RRC Connection and RAB Assignment Interval Type 0~60
0~60
WRFD05030101
ALL(Select all ports), SINGLE(Select one port) ALL, SINGLE ALL(Select all ports), SINGLE(Select one ALL(Select all E1/T1 port) PORT(Select ALL, SINGLE ports),
None
None
None
Enumeration Type
None
WRFD05030102
WRFD021400
WRFD050406
WRFD050406
WRFD050404
WRFD050406
all E1/T1 ports of one channelized optical port), SINGLE(Select one E1/T1 port) CBR, RT_VBR, Direct Signaling CORRM_SRNSR_PS NRT_VBR, UBR, BE, Connection ReBE_RELOC, AF11, AF12, AF13, establishment Enumeration CORRM_SRNSR_PS ATM QoS AF21, AF22, AF23, (DSCR) Type BE_DSCR Introduction on AF31, AF32, AF33, Hub NodeB AF41, AF42, AF43, (Overbooking EF, LQBE, LQAF11, on Hub Node B ATM QoS LQAF12, LQAF13, Transmission) Interval Type 0~100RT_VBR, CBR, Introduction on LQAF21, LQAF22, NRT_VBR, UBR, BE, Hub NodeB LQAF23, LQAF31, AF11, AF12, AF13, (Overbooking LQAF32, LQAF33, on Hub Node B Enumeration AF21, AF22, AF23, LQAF41, LQAF42, AF31, AF32, AF33, Transmission) Type LQAF43, LQEF AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, ATM/IP Dual ATM QoS LQAF21, LQAF22, Stack Node B Interval Type 0~100 LQAF31, Introduction on LQAF23, Hub NodeB LQAF32, LQAF33, (Overbooking LQAF41, LQAF42, on Hub Node B Enumeration LQAF43, LQEF, Transmission) Type NULL
ALL, PORT, CBR, RT_VBR, SINGLE NRT_VBR, UBR, None BE, AF11, AF12, CORRM_SRNSR AF13, AF21, _PSBE_RELOC, AF22, AF23, CORRM_SRNSR AF31, AF32, _PSBE_DSCR None AF33, AF41, AF42, AF43, EF, CBR, RT_VBR, LQBE, LQAF11, NRT_VBR, UBR, LQAF12, LQAF13, 0~100 LQAF22, per cent BE, AF11, LQAF21, AF12, AF13, AF21, LQAF23, LQAF31, AF22, AF23, LQAF32, LQAF33, AF31, AF32, LQAF41, LQAF42, AF33, AF41, LQAF43, LQEF None AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, 0~100 LQAF31, None LQAF23, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL None
WRFD050404
ATM/IP Dual ATM QoS Stack Node B Interval Type 0~100 Introduction on Hub NodeB (Overbooking on Hub Node B Transmission) Interval Type 0~100
0~100
None
WRFD050406
0~100
per cent
WRFD020501
dB
WRFD050406
WRFD050406
WRFD050404
WRFD050406
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, ATM QoS AF21, AF22, AF23, Introduction on AF31, AF32, AF33, Hub NodeB AF41, AF42, AF43, (Overbooking EF, LQBE, LQAF11, on Hub Node B ATM QoS LQAF12, LQAF13, Transmission) Interval Type 0~100RT_VBR, CBR, Introduction on LQAF21, LQAF22, NRT_VBR, UBR, BE, Hub NodeB LQAF23, LQAF31, AF11, AF12, AF13, (Overbooking LQAF32, LQAF33, on Hub Node B Enumeration AF21, AF22, AF23, LQAF41, LQAF42, AF31, AF32, AF33, Transmission) Type LQAF43, LQEF AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, ATM/IP Dual ATM QoS LQAF21, LQAF22, Stack Node B Interval Type 0~100 LQAF31, Introduction on LQAF23, Hub NodeB LQAF32, LQAF33, (Overbooking LQAF41, LQAF42, on Hub Node B Enumeration LQAF43, LQEF, Transmission) Type NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, CBR, RT_VBR, LQBE, LQAF11, NRT_VBR, UBR, LQAF12, LQAF13, 0~100 LQAF22, per cent BE, AF11, LQAF21, AF12, AF13, AF21, LQAF23, LQAF31, AF22, AF23, LQAF32, LQAF33, AF31, AF32, LQAF41, LQAF42, AF33, AF41, LQAF43, LQEF None AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, 0~100 LQAF31, None LQAF23, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL None
WRFD050404
ATM/IP Dual ATM QoS Stack Node B Interval Type 0~100 Introduction on Hub NodeB (Overbooking on Hub Node B Transmission) Interval Type 0~100
0~100
None
WRFD050406
0~100
per cent
WRFD020203
0~511
None
WRFD022000
0~511
None
WRFD050404
0~100
None
Inter-RAT ATM/IP Dual Handover Stack Node B Interval Type 0~100 Based on Service Inter-RAT Handover Based on Load Interval Type 0~100 3.4/6.8/13.6/27. 2 kbit/s RRC Connection and RAB Assignment Interval Type 0~14400
0~100
None
0~100
per cent
WRFD010510
0~14400
WRFD010510
3.4/6.8/13.6/27. 2 kbit/s RRC Connection and RAB Assignment 3.4/6.8/13.6/27. Interval Type 0~14400 2 kbit/s RRC Connection and RAB Assignment 3.4/6.8/13.6/27. Interval Type 0~64800 2 kbit/s RRC Connection and RAB Assignment 3.4/6.8/13.6/27. Interval Type 0~14400 2 kbit/s RRC Connection and RAB Assignment Interval Type 0~14400 Iu Flex Load Distribution Management
0~14400
WRFD010510
0~64800
WRFD010510
0~14400
WRFD010510
0~14400
WRFD021306
Enumeration Type
OFF, ON
OFF, ON
None
WRFD021306
WRFD050406
WRFD050406
WRFD050406
WRFD050406
WRFD050406
WRFD050406
Iu Flex Load Distribution ATM QoS Management Introduction on Interval Type 60~900 CBR, RT_VBR, Hub NodeB NRT_VBR, UBR, BE, (Overbooking AF11, AF12, AF13, on Hub Node B ATM QoS Transmission) Interval Type AF21,RT_VBR, 0~100 AF22, AF23, CBR, Introduction on AF31, AF32, AF33, NRT_VBR, UBR, BE, Hub NodeB AF41, AF42, AF43, AF11, AF12, AF13, (Overbooking EF, LQBE, LQAF11, AF21, AF22, AF23, on Hub Node B ATM QoS LQAF12, LQAF13, AF31, Transmission) Interval Type 0~100 AF32, AF33, Introduction on LQAF21, LQAF22, AF41,RT_VBR, CBR, AF42, AF43, Hub NodeB LQAF23, LQAF31, EF, LQBE, LQAF11, NRT_VBR, UBR, BE, (Overbooking LQAF32, LQAF33, LQAF12, LQAF13, on Hub Node B Enumeration AF11, AF12, AF13, LQAF41, LQAF42, ATM QoS LQAF21, LQAF22, AF21,RT_VBR, Transmission) Type LQAF43, LQEF CBR, AF22, AF23, Introduction on LQAF23, LQAF31, AF31, AF32, AF33, NRT_VBR, UBR, BE, Hub NodeB LQAF32, LQAF33, AF41, AF42, AF43, AF11, AF12, AF13, (Overbooking LQAF41, LQAF42, EF, LQBE, LQAF11, AF21, AF22, AF23, on Hub Node B Enumeration LQAF43, LQEF, ATM QoS LQAF12, LQAF13, AF31, AF32, AF33, Transmission) Type NULL Introduction on LQAF21, LQAF22, AF41, AF42, AF43, Hub NodeB LQAF23, LQAF31, EF, LQBE, LQAF11, (Overbooking LQAF32, LQAF33, LQAF12, LQAF13, on Hub Node B Enumeration LQAF41, LQAF42, ATM QoS LQAF21, LQAF22, Transmission) Type LQAF43, LQEF Introduction on LQAF23, LQAF31, Hub NodeB LQAF32, LQAF33, (Overbooking LQAF41, LQAF42, on Hub Node B Enumeration LQAF43, LQEF, Transmission) Type NULL
CBR, RT_VBR, 60~900 NRT_VBR, UBR, s BE, AF11, AF12, AF13,RT_VBR, CBR, AF21, AF22, AF23, NRT_VBR, UBR, AF31, AF32, 0~100 BE, AF11, AF12, per cent AF33, AF41, AF13, AF21, AF42, AF43, EF, AF22, AF23, LQBE,AF32, LQAF11, AF31,RT_VBR, CBR, LQAF12, LQAF13, AF33, 0~100 AF41, NRT_VBR, UBR, LQAF21, LQAF22, per cent AF42, AF43, EF, BE, AF11, AF12, LQAF23, LQAF31, LQBE,AF21, LQAF11, AF13,RT_VBR, LQAF32, LQAF33, CBR, LQAF12, LQAF13, AF22, AF23, LQAF41, LQAF42, NRT_VBR, UBR, LQAF21, LQAF22, AF31, AF32, LQAF43, LQEF BE, AF11, AF12, None LQAF23, LQAF31, AF33, AF41, AF13, AF21, LQAF32, LQAF33, AF42, AF43, EF, AF22, AF23, LQAF41, LQAF42, LQBE,AF32, AF31, LQAF11, LQAF43, LQEF, LQAF12, LQAF13, AF33, AF41, NULL LQAF21, LQAF22, None AF42, AF43, EF, LQAF23, LQAF31, LQBE, LQAF11, LQAF32, LQAF33, LQAF12, LQAF13, LQAF41, LQAF42, LQAF21, LQAF22, LQAF43, LQEF LQAF23, LQAF31, None LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL None
WRFD050406
ATM QoS Introduction on Hub NodeB (Overbooking on Hub Node B Enumeration ATM QoS Transmission) Type Introduction on Hub NodeB (Overbooking on Hub Node B Enumeration Transmission) Type
AF11, AF12, AF13, AF21,RT_VBR, CBR, AF22, AF23, AF31, AF32, AF33, NRT_VBR, UBR, BE, AF41, AF42, AF43, AF11, AF12, AF13, EF, LQBE, LQAF11, AF21, AF22, AF23, LQAF12, LQAF13, AF31, AF32, AF33, LQAF21, LQAF22, AF41, AF42, AF43, LQAF23, LQAF31, EF, LQBE, LQAF11, LQAF32, LQAF33, LQAF12, LQAF13, LQAF41, LQAF42, LQAF21, LQAF22, LQAF43, LQEF LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
AF22, AF23, NRT_VBR, UBR, AF31, AF32, BE, AF11, AF12, AF33, AF41, AF13, AF21, AF42, AF43, EF, AF22, AF23, LQBE,AF32, AF31, LQAF11, LQAF12, LQAF13, AF33, AF41, LQAF21, LQAF22, AF42, AF43, EF, LQAF23, LQAF31, LQBE, LQAF11, LQAF32, LQAF33, LQAF12, LQAF13, LQAF41, LQAF42, LQAF21, LQAF22, LQAF43, LQEF LQAF23, LQAF31, None LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL None
WRFD050406
WRFD050404
0~100
None
WRFD050404
0~100
None
WRFD050404
0~100
None
Iu Flex MOCN Introduction Package 3.4/6.8/13.6/27. Interval Type 1~10 2 kbit/s RRC Connection and RAB Assignment 3.4/6.8/13.6/27. Interval Type 0~100 2 kbit/s RRC Connection and RAB Assignment 3.4/6.8/13.6/27. Interval Type 0~65534 2 kbit/s RRC Connection and RAB Assignment 3.4/6.8/13.6/27. Interval Type 0~100 2 kbit/s RRC Connection and RAB Assignment Interval Type 0~65534
1~10
None
WRFD010510
0~100
per cent
WRFD010510
0~65534
None
WRFD010510
0~100
per cent
WRFD010510
0~65534
None
WRFD020114
Domain Specific Access Control Enumeration (DSAC) Type Domain Specific Access Control Enumeration (DSAC) Type Inter-RAT Handover Based on Enumeration ATM QoS Service Introduction on Type Hub NodeB (Overbooking on Hub Node B ATM QoS Transmission) Interval Type Introduction on Hub NodeB (Overbooking on Hub Node B Enumeration Transmission) Type
FALSE, TRUE
FALSE, TRUE
None
WRFD020114
WRFD020305
WRFD050406
WRFD050406
WRFD050404
ATM/IP Dual ATM QoS Stack Node B Interval Type Introduction on Hub NodeB (Overbooking on Hub Node B Enumeration Transmission) Type
WRFD050406
WRFD050404
ATM/IP Dual ATM QoS Stack Node B Interval Type Introduction on Hub NodeB Dynamic (Overbooking Channel on Hub Node B Configuration Transmission) Interval Type Control (DCCC) RAB Quality of Service Renegotiation over Iu Interface Bit Field Type
CBR, RT_VBR, FALSE, TRUE FALSE, TRUE NRT_VBR, UBR, None CBR, RT_VBR, BE, AF11, AF12, NRT_VBR, UBR, BE, AF13, AF21, AF11, AF12, AF13, AF22, AF23, AF21, AF22, AF23, AF31, AF32, OFF, ON OFF, ON None AF31, AF32, AF33, AF33, AF41, AF41, AF42, AF43, AF42, AF43, EF, CBR, RT_VBR, EF, LQBE, LQAF11, LQBE, LQAF11, NRT_VBR, UBR, LQAF12, LQAF13, LQAF12, LQAF13, 0~100RT_VBR, 0~100 LQAF22, per cent CBR, BE, AF11, AF12, LQAF21, LQAF22, LQAF21, NRT_VBR, UBR, BE, LQAF23, LQAF31, AF13, AF21, LQAF23, LQAF31, AF11, AF12, AF13, AF22, AF23, LQAF32, LQAF33, LQAF32, LQAF33, AF21, AF22, AF23, AF31, AF32, LQAF41, LQAF42, LQAF41, LQAF42, AF31, AF32, AF33, AF33, AF41, LQAF43, LQEF LQAF43, LQEF None AF41, AF42, AF43, AF42, AF43, EF, EF, LQBE, LQAF11, LQBE, LQAF11, LQAF12, LQAF13, LQAF12, LQAF13, LQAF21, LQAF22, LQAF21, LQAF22, PS_BE_EXTRA_L None 0~100 LQAF31, 0~100 LQAF31, LQAF23, LQAF23, OW_RATE_ACCE LQAF32, LQAF33, PS_BE_EXTRA_LO LQAF32, LQAF33, SS_SWITCH, LQAF41, LQAF42, W_RATE_ACCESS_ LQAF41, LQAF42, PS_BE_INIT_RAT LQAF43, LQEF, LQAF43, LQEF, SWITCH, E_DYNAMIC_CF NULL None PS_BE_INIT_RATE_ NULL G_SWITCH, DYNAMIC_CFG_SWI PS_BE_IU_QOS_ TCH, NEG_SWITCH, PS_BE_IU_QOS_NE PS_RAB_DOWNS G_SWITCH, IZING_SWITCH, None 0~100 0~100 PS_RAB_DOWNSIZI PS_RSC_FEEDB NG_SWITCH, K_RABSETUP_C PS_RSC_FEEDBK_R ACFAIL_SWITCH, ABSETUP_CACFAIL PS_STREAM_IU_ 0~100 0~100 _SWITCH, QOS_NEG_SWIT per cent PS_STREAM_IU_QO CH, S_NEG_SWITCH, PS_BE_STRICT_I PS_BE_STRICT_IU_ U_QOS_NEG_S QOS_NEG_SWITCH WITCH None
0~8040000
None
None
None
Enumeration Type
ON(ON), OFF(OFF)
ON, OFF
None
Enumeration Type
BOOL(BOOL), VALUE(VALUE)
BOOL, VALUE
None
None
None
123~65534
None
WRFD05030101
WRFD031101
DHCP
IP Address Type
None
WRFD031101
DHCP MBMS Admission Control MBMS Admission Control MBMS Admission Control
IP Address Type
None
WRFD01061602
Enumeration Type
ON, OFF
ON, OFF
None
WRFD01061602
Enumeration Type
WRFD01061602
Enumeration Type
WRFD05030101
WRFD05030101
WRFD05030101
E1_DOUBLE_FRAM E(E1_DOUBLE_FRA ME),OFF ON, ON, OFF E1_CRC4_MULTI_F RAME(E1_CRC4_MU E1_DOUBLE_FR E1_DOUBLE_FRAM LTI_FRAME), E(E1_DOUBLE_FRA AME, T1_SUPER_FRAME( E1_CRC4_MULTI ME), ON, OFF T1_SUPER_FRAME), ON, OFF E1_CRC4_MULTI_F _FRAME, T1_EXTENDED_SUP T1_SUPER_FRA RAME(E1_CRC4_MU E1_DOUBLE_FR E1_DOUBLE_FRAM ME, ER_FRAME(T1_EXT AME, LTI_FRAME), E(E1_DOUBLE_FRA T1_EXTENDED_ ENDED_SUPER_FR E1_CRC4_MULTI T1_SUPER_FRAME( ME), AME) T1_SUPER_FRAME), SUPER_FRAME E1_CRC4_MULTI_F _FRAME, T1_EXTENDED_SUP T1_SUPER_FRA RAME(E1_CRC4_MU E1_DOUBLE_FR ER_FRAME(T1_EXT ME, LTI_FRAME), AME, ENDED_SUPER_FR T1_EXTENDED_ T1_SUPER_FRAME( E1_CRC4_MULTI AME) T1_SUPER_FRAME), SUPER_FRAME _FRAME, T1_EXTENDED_SUP T1_SUPER_FRA ER_FRAME(T1_EXT ME, ENDED_SUPER_FR T1_EXTENDED_ AME) SUPER_FRAME
None
None
None
None
None
None
None
Enumeration Type
FE, GE
FE, GE
None
String Type
None
WRFD020102
Load Measurement
1~32
None
WRFD020105
6~86400
WRFD01061602
0~60
Password Type
None
0~64 characters
None
Password Type
None
1~32 characters
None
BIT0, BIT1, BIT6, BIT7, BIT8, BIT9, BIT0, BIT1, BIT6, BIT14, BIT15, Interval Type 6~32 BIT8, BIT9, 6~32 characters None BIT7, BIT16, BIT17, BIT14, BIT15, BIT16, BIT22, BIT23, BIT17, BIT22, BIT23, BIT24, BIT25, BIT24, BIT25, BIT29, BIT29, BIT30, Bit Field Type BIT30, BIT31 BIT31BIT1, BIT2, None BIT0, BIT1, BIT2, BIT0, BIT3, BIT4, BIT5, BIT3, BIT4, BIT5, BIT6, BIT7, BIT8, BI16, BIT7, BIT8, BIT9, BIT10, BIT11, BIT9, BIT10, Bit Field Type BIT12 BIT11, BIT12 None
WRFD020504
Enumeration Type
ALGORITHM1, ALGORITHM2
ALGORITHM1, ALGORITHM2
None
None
None
0~63
None
None
None
0~63
None
None
None
None
None
None
None
WRFD05030104
WRFD010802
3: -22.5 ... 45: -1.5 46: -1 47: -0.5 48: 0 49: (spare) ... 98: (spare) 99: (spare) 0~63 When CPICH RSCP (FDD) is employeed, unit for Qhcs is dBm, 0~63 physical value for each parameter value is: 0: -115 1: -114 0~63 2: -113 : 88: -27 89: -26 CS1, CS2 90: -(spare) 91: -(spare) : 98: -(spare) 99: -(spare)
None
None
None
None
dB/ dBm
WRFD021200
0~99
dB/ dBm
WRFD010801
{0~40}, {255}
dB
WRFD010801
{0~40}, {255}
dB
WRFD010801
{0~40}, {255}
dB
WRFD010801
{0~40}, {255}
dB
WRFD010802
-50~50
dB
WRFD010802
-24~0
dB
WRFD010801
WRFD010802
TRUE(Configure the Interval Type -24~0 -24~0 minimum quality threshold), FALSE(Not configure Enumeration the minimum quality Type threshold) TRUE, FALSE
dB
None
WRFD010802
dBm
WRFD020303
dBm
WRFD010801
-115~-25, step:2
dBm
WRFD010802
Enumeration Type
TRUE, FALSE
TRUE, FALSE
None
WRFD010801
Enumeration Type
WRFD010802
Enumeration Type
TRUE(Configure the TRUE, FALSE level TRUE, FALSE minimum signal for access), FALSE(Not configure the minimum signal level for access) TRUE, FALSE CPICH_ECNO(CPIC H Ec/N0), CPICH_RSCP(CPICH CPICH_ECNO, RSCP) CPICH_RSCP
None
None
WRFD010801
Enumeration Type
None
Enumeration Type
OFF, ON
OFF, ON
None
Conversational QoS Class Queuing and Streaming QoS Pre-Emption Interval Type 5~20 Class Interactive QoS Class Background QoS Class Interval Type 0~99
5~20
None
0~99
None
Conversational QoS Class Streaming QoS Class Interactive QoS Conversational Class 0~6, 11~13, QoS Class Background 0~6,11~13,15~19,21~ 15~19, 21~28, Streaming QoS QoS Class Interval Type 28,40~63,70~93 40~63, 70~93 Class Interactive QoS Class Background QoS Class Interval Type 0~99 Dynamic SUBCHANEL0, Channel SUBCHANEL1, Configuration SUBCHANEL2, Control (DCCC) Interval Type 1~65535 SUBCHANEL3, SUBCHANEL4, SUBCHANEL5, 3GPP SUBCHANEL6, Specifications Interval Type 0~255 SUBCHANEL7, SUBCHANEL8, SUBCHANEL9, 3GPP SUBCHANEL10, Specifications Bit Field Type SUBCHANEL11
None
WRFD021101
WRFD010101
WRFD010101
0~99 SUBCHANEL0, SUBCHANEL1, SUBCHANEL2, SUBCHANEL3, 1~65535 SUBCHANEL4, SUBCHANEL5, SUBCHANEL6, SUBCHANEL7, 0~255 SUBCHANEL8, SUBCHANEL9, SUBCHANEL10, SUBCHANEL11. (Multiple options.)
None
None
None
WRFD010101
3GPP Specifications RAN Sharing Introduction Package Inter-RAT Handover Based on Coverage
10000~240000
ms
WRFD021304
Enumeration Type
NO, YES
NO, YES
None
WRFD020303
Enumeration Type
NO_CAPABILITY(Cel l capability unknown), NO_CAPABILITY, GSM~1 GPRS~2 GSM, GPRS, EDGE EDGE None
WRFD010101
0~240000
ms
WRFD021000
1~256
None
WRFD021000
1~256
None
WRFD020107
Overload Control
1~65535
ms
WRFD020107
Overload Control
0.01~0.99, step:0.01
per cent
WRFD020107
Overload Control
1~65535
ms
Enumeration Type
None
WRFD010101
3GPP Specifications
300~10000
ms
WRFD010101
3GPP Specifications
300~10000
ms
WRFD010101
3GPP Specifications
None
None
REC_ALL(Record Interval Type 300~10000 All), REC_ERR(Record Errors), Enumeration REC_NON(Record Type None)
ms
None
None
None
0~100
None
WRFD01066001
10~3600, step: 10 s
WRFD020107
Overload Control
1~2, step:0.01
per cent
None
None
20~99
None
Enumeration Type
YES(YES), NO(NO)
YES, NO
None
Enumeration Type
Band1, Band2, Band3, Band4, Band5, Band6, Band7, Band8, Band9, Band2, Band1, DependOnNCell, Band3, Band4, BandIndNotUsed Band5, Band6, Band7, Band8, Band9, Band2, Band1, DependOnNCell, Band3, Band4, BandIndNotUsed Band5, Band6, Band7, Band8, Band9, Band2, Band1, DependOnNCell, Band3, Band4, BandIndNotUsed Band5, Band6, Band7, Band8, Band9, DependOnNCell, BandIndNotUsed
Band1, Band2, Band3, Band4, Band5, Band6, Band7, Band8, Band9, Band2, Band1, DependOnNCell, Band3, Band4, BandIndNotUsed None Band5, Band6, Band7, Band8, BAND1, BAND2, Band9, BAND4, BAND3, DependOnNCell, BAND5, BAND6, BandIndNotUsed None BAND7, BAND8, BAND9, BAND2, BAND1, DependOnNCell, BAND3, BAND4, BANDINDNOTUS BAND5, BAND6, ED BAND7, BAND8, None BAND9, DependOnNCell, BANDINDNOTUS ED None
Introduction Package Inter System Enumeration RedirectSteering Type Service and Load Sharing in RRC Connection Enumeration Setup Steering Type Service and Load Sharing in RRC Connection Enumeration Setup Steering Type Service
WRFD020120
WRFD020120
WRFD020120
and Load Sharing in RRC Connection Setup Steering Interval Type 0~100 Service and Load Sharing in RRC Connection Setup Steering Interval Type 0~100 Service and Load Sharing in RRC Connection Setup Steering Interval Type 0~100 Service and Load Sharing in RRC Connection Setup Steering Interval Type 0~100 Service OFF, and Load ONLY_TO_INTER_F Sharing in RRC REQUENCY, Connection Enumeration ONLY_TO_INTER_R Setup Type AT DRD Introduction Package
0~100
per cent
WRFD020120
0~100
per cent
WRFD020120
0~100
per cent
WRFD020120
WRFD020120
WRFD020400
0~16383
None
WRFD02040003
Inter System RedirectSteering Interval Type 0~16383 Service and Load Sharing in RRC Connection Setup Interval Type 0~16383
0~16383
None
WRFD020120
0~16383
None
WRFD020120
Service Steering and Load Sharing in RRC Connection Setup Steering Interval Type 0~16383 Service and Load Sharing in RRC Connection Setup Interval Type 0~16383
0~16383
None
WRFD020120
0~16383
None
WRFD02040003
Inter System RedirectSteering Interval Type 0~16383 Service and Load Sharing in RRC Connection Setup Steering Interval Type 0~16383 Service and Load Sharing in RRC Connection Setup Interval Type 0~16383
0~16383
None
WRFD020120
0~16383
None
WRFD020120
0~16383
None
WRFD02040003
Enumeration Type
TRUE, FALSE
TRUE, FALSE
None
WRFD02040003
Inter System Enumeration RedirectSteering Type Service and Load Sharing in RRC Connection Enumeration Setup Steering Type Service and Load Sharing in RRC Connection Enumeration Setup Type
TRUE, FALSE
TRUE, FALSE
None
WRFD020120
FALSE, TRUE
FALSE, TRUE
None
WRFD020120
FALSE, TRUE
FALSE, TRUE
None
0~31
None
0~31
None
OFF(OFF), ON(ON)
OFF, ON
None
OFF(OFF), ON(ON)
OFF, ON
None
NO(NO), YES(YES)
NO, YES
None
WRFD040100
Flow Control
Enumeration Type
WRFD040202
Enumeration Type
OFF, ON
None
WRFD05030104
2000~60000
ms
WRFD010101
3GPP Specifications
1~10000
ms
WRFD010101
3GPP Specifications
1~20000
ms
WRFD010101
3GPP Specifications
1~20000
ms
WRFD010101
3GPP Specifications
1~20000
ms
WRFD010101
3GPP Specifications
1~10000
ms
WRFD010101
3GPP Specifications
1~60000
ms
WRFD010101
3GPP Specifications
1~10000
ms
WRFD010101
3GPP Specifications
1~10000
ms
WRFD010101
3GPP Specifications
1~20000
ms
Dynamic AAL2 Connections in Iub/IuCS/Iur Interface Interval Type 2000~60000 Intra RNC Softer Handover Inter RNC Soft Handover Interval Type -29~29
2000~60000
ms
-14.5~14.5, step:0.5
dB
None
None
String Type
None
1~31 characters
None
None
None
String Type
None
None
None
String Type
None
WRFD011000
0~65535
None
Interval Type 1~4096 NON_PERIODIC_RE Intra RNC Softer PORT, D250~1 Handover D500~2 D1000~3 Inter RNC Soft Enumeration D2000~4 D4000~5 Handover Type D8000~6 D16000 NON_PERIODIC_RE Intra RNC Softer Handover Inter RNC Soft Enumeration Handover Type Intra RNC Softer Handover Inter RNC Soft Enumeration Handover Type PORT, D250~1 D500~2 D1000~3 D2000~4 D4000~5 D8000~6 D16000 NON_PERIODIC_RE PORT, D250~1 D500~2 D1000~3 D2000~4 D4000~5 D8000~6 D16000
1~4096 NON_PERIODIC_ s REPORT, 250, 500, 1000, 2000, 4000, 8000, 16000 NON_PERIODIC_ ms REPORT, 250, 500, 1000, 2000, 4000, 8000, 16000 NON_PERIODIC_ ms REPORT, 250, 500, 1000, 2000, 4000, 8000, 16000
ms
WRFD020303
Enumeration Type
WRFD040100
Flow Control
Interval Type
WRFD040100
Flow Control
Interval Type
WRFD040100
Flow Control
Interval Type
WRFD040100
Flow Control
Interval Type
WRFD040100
Flow Control
Enumeration Type
None
None
None
None
RESERVED_SWITC RESERVED_SWITC H_0_BIT14, H_1_BIT12, RESERVED_SWITC RESERVED_SWITC H_0_BIT15, H_1_BIT13, RESERVED_SWITC RESERVED_SWITC H_0_BIT16, H_1_BIT14, RESERVED_SWITC RESERVED_SWITC H_0_BIT17, H_1_BIT15, RESERVED_SWITC RESERVED_SWITC H_0_BIT18, H_1_BIT16, RESERVED_SWITC GSM, GPRS, EDGE RESERVED_SWITC H_0_BIT19, H_1_BIT17, RESERVED_SWITC RESERVED_SWITC H_0_BIT20, H_1_BIT18, RESERVED_SWITC RESERVED_SWITC 30~100 H_0_BIT21, H_1_BIT19, RESERVED_SWITC RESERVED_SWITC H_0_BIT22, H_1_BIT20, RESERVED_SWITC RESERVED_SWITC H_0_BIT23, 30~100 H_1_BIT21, RESERVED_SWITC RESERVED_SWITC H_0_BIT24, H_1_BIT22, RESERVED_SWITC RESERVED_SWITC H_0_BIT25, H_1_BIT23, 30~100 RESERVED_SWITC RESERVED_SWITC H_0_BIT26, H_1_BIT24, RESERVED_SWITC RESERVED_SWITC H_0_BIT27, H_1_BIT25, RESERVED_SWITC 30~100 RESERVED_SWITC H_0_BIT28, H_1_BIT26, RESERVED_SWITC RESERVED_SWITC H_0_BIT29, H_1_BIT27, RESERVED_SWITC RESERVED_SWITC ON, OFF H_0_BIT30, H_1_BIT28, RESERVED_SWITC RESERVED_SWITC H_0_BIT31, H_1_BIT29, RESERVED_SWITC RESERVED_SWITC H_0_BIT32 H_1_BIT30, RESERVED_SWITC H_1_BIT31, RESERVED_SWITC H_1_BIT32
RESERVED_SWI RESERVED_SWI TCH_0_BIT14, TCH_1_BIT12, RESERVED_SWI RESERVED_SWI TCH_0_BIT15, TCH_1_BIT13, RESERVED_SWI RESERVED_SWI TCH_0_BIT16, TCH_1_BIT14, RESERVED_SWI RESERVED_SWI TCH_0_BIT17, TCH_1_BIT15, RESERVED_SWI RESERVED_SWI TCH_0_BIT18, GSM, GPRS, TCH_1_BIT16, RESERVED_SWI EDGE RESERVED_SWI TCH_0_BIT19, TCH_1_BIT17, RESERVED_SWI RESERVED_SWI TCH_0_BIT20, TCH_1_BIT18, RESERVED_SWI RESERVED_SWI 30~100 TCH_0_BIT21, TCH_1_BIT19, RESERVED_SWI RESERVED_SWI TCH_0_BIT22, TCH_1_BIT20, RESERVED_SWI RESERVED_SWI TCH_0_BIT23, 30~100 TCH_1_BIT21, RESERVED_SWI RESERVED_SWI TCH_0_BIT24, TCH_1_BIT22, RESERVED_SWI RESERVED_SWI TCH_0_BIT25, TCH_1_BIT23, 30~100 RESERVED_SWI RESERVED_SWI TCH_0_BIT26, TCH_1_BIT24, RESERVED_SWI RESERVED_SWI TCH_0_BIT27, TCH_1_BIT25, RESERVED_SWI 30~100 RESERVED_SWI TCH_0_BIT28, TCH_1_BIT26, RESERVED_SWI RESERVED_SWI TCH_0_BIT29, TCH_1_BIT27, RESERVED_SWI RESERVED_SWI ON, OFF TCH_0_BIT30, TCH_1_BIT28, RESERVED_SWI RESERVED_SWI TCH_0_BIT31, TCH_1_BIT29, RESERVED_SWI RESERVED_SWI TCH_0_BIT32 TCH_1_BIT30, RESERVED_SWI TCH_1_BIT31, RESERVED_SWI TCH_1_BIT32
None
per cent
per cent
per cent
per cent
None
None
None
None
None
0~4294967295
None
None
None
0~4294967295
None
None
None
0~255
None
None
None
0~255
None
1~60
min
WRFD05030104
2000~60000
ms
Enumeration Type
NO(No), YES(Yes)
NO, YES
None
None
None
2~5
None
None
2~5
WRFD020114
RestrictionFixed, Noneed, RestrictionFlexible None Manually, Reset, Normally, Correlative, Configuration, Expired SRB_OVER_HSD PA, SRB_OVER_HSU PA, TTI_2MS, 0~10 64QAM, MIMO, L2_ENHANCE, DTX_DRX, HSSCCH_LESS_ OPERATION TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, 1~100 TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, AM, UM, TM TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31
Reset, Normally, Correlative, Configuration, Bit Field Type Expired SRB_OVER_HSDPA, SRB_OVER_HSUPA, TTI_2MS, MIMO, Interval Type 0~10 64QAM, L2_ENHANCE, DTX_DRX, HSSCCH_LESS_OP Bit Field Type ERATION
None
None
None
Conversational QoS Class Streaming QoS None Interval Type Class Interactive QoS Class Background Enumeration QoS Class Type
None
None
TS1, TS2, TS3, TS4, 1~100 TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, AM, UM, TM TS20, TS18, TS19, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, Bit Field Type TS30, TS31
None
None
None
WRFD021000
0~4992
bit
WRFD020101
Admission Control
-35~15, step:0.1
dB
WRFD020101
Admission Control
-35~15, step:0.1
dB
WRFD010101
3GPP Specifications
1~10000
ms
WRFD010101
3GPP Specifications
1~10000
ms
WRFD010101
3GPP Specifications
1~10000
ms
WRFD010101
3GPP Specifications
1~10000
ms
0~4095
None
WRFD010101
3GPP Specifications
0~4095
None
None
None
0~4095
None
WRFD011000
IP Address Type
None
WRFD040202
Interval Type
0 None
ORIGBKGCALLEST, TERMCONVCALL ORIGSUBSTRAFFC EST, ALLEST, TERMSTREAMC TERMCONVCALLES ALLEST, T, TERMINTERCALL TERMSTREAMCALL EST, EST, TERMBKGCALLE TERMINTERCALLES ST, T, EMERGCALLEST TERMBKGCALLEST, , WRFDRNC Node EMERGCALLEST, INTERRATCELLR None 040202 Redundancy String Type None 1~20 characters INTERRATCELLRES ESELEST, ELEST, INTERRATCELLC INTERRATCELLCHG HGORDEREST, WRFD3GPP Enumeration ORDEREST, R99, R4, R5, R6, REGISTEST, 010101 Specifications Type R99, R4, R5, R6, R7 R7 None REGISTEST, DETACHEST, DETACHEST, ORIGHIGHPRIOR ORIGHIGHPRIORSI SIGEST, GEST, ORIGLOWPRIOR Security ORIGLOWPRIORSIG 0~200 characters None SIGEST, MRFD-210305 Management String Type None EST, CALLREEST, CALLREEST, TERMHIGHPRIORSI TERMHIGHPRIO GEST, RSIGEST, TERMLOWPRIORSI TERMLOWPRIOR None None 20~99 None 3.4/6.8/13.6/27. Interval Type 20~99 GEST, SIGEST, 2 kbit/s RRC TERMCAUSEUNKNO TERMCAUSEUN Connection and WN, KNOWN, WRFDRAB Enumeration MBMSCALLEST, MBMSCALLEST, 010510 Assignment Type DEFAULTEST DEFAULTEST None 3.4/6.8/13.6/27. 2 kbit/s RRC Connection and WRFDRAB 010510 Assignment 0~65534 None 3.4/6.8/13.6/27. Interval Type 0~65534 WRFD010510 2 kbit/s RRC Connection and RAB Assignment Interval Type 0~100
0~100
per cent
WRFD010101
3GPP Specifications
0~15
WRFD010101
3GPP Specifications
1~10000
ms
WRFD010101
3GPP Specifications
1~10000
ms
WRFD010101
3GPP Specifications
1~10000
ms
WRFD010101
3GPP Specifications
1~5000
ms
WRFD010101
3GPP Specifications
1~3000
ms
WRFD010101
3GPP Specifications
1~10000
ms
WRFD010101
1~10000
ms
WRFD050301
Enumeration Type
NO(NO), YES(YES)
NO, YES
None
WRFD050301
ATM Transmission Introduction ATM QoS Package Introduction on Interval Type 0~2047 Hub NodeB (Overbooking on Hub Node B Enumeration Transmission) Type
0~2047
None
WRFD050406
None
None
None
Enumeration Type
None
None
None
Enumeration Type
None
WRFD02130406
None
Enumeration Type
WRFD050301
5000~20000(UNI), 1200~20000(NNI) ms
None
None
String Type
None
1~50 characters
None
WRFD050301
Enumeration Type
WRFD010101
3GPP Specifications
Interval Type
None
None
Interval Type
WRFD010101
3GPP Specifications
WRFD020101
Admission Control
WRFD020101
Admission Control
WRFD020101
Admission Control
RSVDBIT1_BIT9, RSVDBIT1_BIT10, RSVDBIT1_BIT11, RSVDBIT1_BIT12, RSVDBIT1_BIT13, RSVDBIT1_BIT14, RSVDBIT1_BIT15, RSVDBIT1_BIT16, RSVDBIT1_BIT17, RSVDBIT1_BIT18, OFF(OFF), ON(ON) RSVDBIT1_BIT19, RSVDBIT1_BIT20, RSVDBIT1_BIT21, RSVDBIT1, RSVDBIT1_BIT22, RSVDBIT2, RSVDBIT1_BIT23, 0~5 RSVDBIT3, RSVDBIT1_BIT24, RSVDBIT4, RSVDBIT1_BIT25, RSVDBIT5, RSVDBIT1, RSVDBIT1_BIT26, RSVDBIT6, RSVDBIT2, RSVDBIT1_BIT27, RSVDBIT7, 0~4294967295 RSVDBIT3, RSVDBIT1_BIT28, RSVDBIT8, RSVDBIT4, RSVDBIT1_BIT29, RSVDBIT9, RSVDBIT5, RSVDBIT1_BIT30, RSVDBIT1, RSVDBIT10, RSVDBIT6, RSVDBIT1_BIT31, RSVDBIT2, RSVDBIT11, RSVDBIT7, RSVDBIT1_BIT32 RSVDBIT3, RSVDBIT12, RSVDBIT8, RSVDBIT4, RSVDBIT13, RSVDBIT9, RSVDBIT5, RSVDBIT14, RSVDBIT10, RSVDBIT6, RSVDBIT15, RSVDBIT11, RSVDBIT7, RSVDBIT16 RSVDBIT12, RSVDBIT8, RSVDBIT13, RSVDBIT9, RSVDBIT14, RSVDBIT10, RSVDBIT15, RSVDBIT11, RSVDBIT16 RSVDBIT12, RSVDBIT13, RSVDBIT14, RSVDBIT15, RSVDBIT16
OFF, ON RSVDBIT1, RSVDBIT2, 0~5 RSVDBIT3, RSVDBIT4, RSVDBIT5, RSVDBIT1, RSVDBIT6, RSVDBIT2, RSVDBIT7, 0~4294967295 RSVDBIT3, RSVDBIT8, RSVDBIT4, This parameter is RSVDBIT9, RSVDBIT5, set to 0 or 1 RSVDBIT1, RSVDBIT10, RSVDBIT6, according to the RSVDBIT2, RSVDBIT11, RSVDBIT7, related domains. RSVDBIT3, RSVDBIT12, RSVDBIT8, RSVDBIT4, RSVDBIT13, RSVDBIT9, RSVDBIT5, RSVDBIT14, RSVDBIT10, RSVDBIT6, RSVDBIT15, RSVDBIT11, RSVDBIT7, RSVDBIT16 RSVDBIT12, RSVDBIT8, RSVDBIT13, RSVDBIT9, RSVDBIT14, RSVDBIT10, RSVDBIT15, RSVDBIT11, RSVDBIT16 RSVDBIT12, RSVDBIT13, RSVDBIT14, RSVDBIT15, RSVDBIT16
None
None
None
None
None
None
None
None
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None
None
None
0~4294967295
None
None
None
0~4294967295
None
None
None
0~4294967295
None
None
None
0~4294967295
None
None
None
0~4294967295
None
None
None
0~4294967295
None
None
None
0~4294967295
None
None
None
0~4294967295
None
None
None
0~4294967295
None
WRFD010101
3GPP Specifications
0~4294967295
None
WRFD020101
Admission Control
0~4294967295
None
WRFD020101
Admission Control
0~4294967295
None
WRFD020101
Admission Control
0~4294967295
None
None
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None
None
None
0~4294967295
None
WRFD020101
Admission Control
0~4294967295
None
WRFD020101
Admission Control
0~4294967295
None
WRFD020101
Admission Control
0~4294967295
None
None
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None
None
None
0~4294967295
None
None
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None
None
None
0~4294967295
None
None
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None
None
None
0~4294967295
None
None
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None
None
None
0~4294967295
None
None
None
0~4294967295
None
None
None
0~4294967295
None
None
None
0~4294967295
None
None
None
0~4294967295
None
None
None
None
None
None
None
WRFD050409
IP Transmission Introduction on Iu Interface Interval Type 0~4294967295 IP Transmission Enhanced Introduction on CELL-FACH Iu Interface / Interval Type 1~5 CPC - DTX DRX CPC - HSSCCH less operation / CPC - DTX DRX CPC - HSSCCH less operation
0~4294967295
None
1~5
per cent
1~65535
1~65535
WRFD050409
OFF, ON
OFF, ON
None
None
None
IP Address Type
None
None
None
IP Address Type
None
WRFD010688
Enhanced CELL-FACH
1~65535
WRFD010202
UE State in Connected Mode (CELLDCH, CELLPCH, URAUE State in PCH, CELLConnected FACH) Mode (CELLDCH, CELLPCH, URAUE State in PCH, CELLConnected FACH) Mode (CELLDCH, CELLPCH, URAUE State in PCH, CELLConnected FACH) Mode (CELLDCH, CELLPCH, URAEnhanced PCH, CELLCELL-FACH FACH)DTX / CPC DRX CPC - HSEnhanced SCCH less CELL-FACH operation / CPC - DTX DRX CPC - HSSCCH less operation
WRFD010202
WRFD010202
Interval Type 1~65535 D8, D16, D32, D64, D128, D256, D512, D250, D500, D3k, D1024, D2k, D1000, Enumeration D2000, D4000, D12k, D4k, D6k, D8k, Type D8000, D16000 D16k, D24k, D32k, D48k, D64k, D96k, D128k, D192k, Enumeration D256k, D384k,D40, D0, D10, D20, Type D512k, D768k D60, D80, D100, Enumeration Type
1~65535
8, 16, 32, 64, 128, 250, 500, 1000, 256, 512, 1024, 2000, 4000, 8000, 2k, 3k, 4k, 6k, 8k, 16000 ms 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k 20, 40, 60, byte 0, 10,
D120, D160, D200, D16, D32, D64, D128, 80, 100, 120, 160, 16, 32, 64, 128, D240, D320, D640, D256, D512, D1024, 200, 240, 320, 256, 512, 1024, D1280, D2560, D6k, 640, 1280, 6k, 8k, D2k, D3k, D4k, 2k, 3k, 4k, 2560, D5000 500016k, 24k, ms D8k, D12k, D16k, 12k, D24k, D32k, D48k, 32k, 48k, 64k, D64k, D96k, D128k, 96k, 128k, 192k, D192k, D256k,D40, 256k, 384k, 512k, D0, D10, D20, D384k, D512k, D768k 768k 20, 40, 60, byte D60, D80, D100, 0, 10, D120, D160, D200, D16, D32, D64, D128, 80, 100, 120, 160, 16, 32, 64, 128, D240, D320, D640, D256, D512, D1024, 200, 240, 320, 256, 512, 1024, D1280, D2560, D6k, 640, 1280, 6k, 8k, D2k, D3k, D4k, 2k, 3k, 4k, 2560, D5000 500016k, 24k, ms D8k, D12k, D16k, 12k, D24k, D32k, D48k, 32k, 48k, 64k, D64k, D96k, D128k, 96k, 128k, 192k, D192k, D256k,D40, 256k, 384k, 512k, D0, D10, D20, D384k, D512k, D768k 768k 20, 40, 60, byte D60, D80, D100, 0, 10, D120, D160, D200, D16, D32, D64, D128, 80, 100, 120, 160, 16, 32, 64, 128, D240, D320, D640, D256, D512, D1024, 200, 240, 320, 256, 512, 1024, D1280, D2560, D6k, 640, 1280, 6k, 8k, D2k, D3k, D4k, 2k, 3k, 4k, 2560, D5000 500016k, 24k, ms D8k, D12k, D16k, 12k, D24k, D32k, D48k, 32k, 48k, 64k, D64k, D96k, D128k, 96k, 128k, 192k, D192k, D256k,D40, 256k, 384k, 512k, D0, D10, D20, D384k, D512k, D768k 768k 20, 40, 60, byte D60, D80, D100, 0, 10, D120, D160, D200, D16, D32, D64, D128, 80, 100, 120, 160, 16, 32, 64, 128, D240, D320, D640, D256, D512, D1024, 200, 240, 320, 256, 512, 1024, D1280, D2560, D6k, 640, 1280, 6k, 8k, D2k, D3k, D4k, 2k, 3k, 4k, 2560, D5000 500016k, 24k, ms D8k, D12k, D16k, 12k, D24k, D32k, D48k, 32k, 48k, 64k, D64k, D96k, D128k, 96k, 128k, 192k, D192k, D256k,D40, 256k, 384k, 512k, D0, D10, D20, D384k, D512k, D768k 768k 20, 40, 60, byte D60, D80, D100, 0, 10, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 ms
Enumeration Type
Enumeration Type
WRFD010688
Enhanced CELL-FACH
Enumeration Type
Enhanced CELL-FACH CPC - DTX / DRX CPC - HSSCCH less operation / CPC - DTX DRX CPC - HSUE State in SCCH less Connected operation Mode (CELLDCH, CELLPCH, URAUE State in PCH, CELLConnected FACH) Mode (CELLDCH, CELLPCH, URAPCH, CELLFACH)
Enumeration Type
Enumeration Type
Enumeration Type
WRFD010202
Enumeration Type
WRFD010202
Enumeration Type
WRFD050402
IP Transmission Introduction on Iub Interface Interval Type 0~100 IP Transmission Introduction on Iub Interface Interval Type 0~100 IP Transmission Introduction on Iub Interface Interval Type 500~60000 IP Transmission Introduction on Iub Interface Interval Type 500~60000 IP Transmission Introduction on Iub Interface Interval Type 500~60000 ATM Transmission Introduction Package
0~100
per cent
WRFD050402
0~100
per cent
WRFD050402
500~60000
ms
WRFD050402
500~60000
ms
WRFD050402
500~60000
ms
WRFD050301
0~4294967295
None
None
None
0~1000
None
None
None
1~100
None
WRFD050402
IP Transmission Introduction on ATM QoS Iub Interfaceon Interval Type 1~3000000 Introduction Hub NodeB (Overbooking on Hub Node B Transmission) Interval Type 0~4000000
1~3000000
kbit/s
WRFD050406
0~4000000
kbit/s
None
512~149000
kbit/s
WRFD050301
100~1999
None
WRFD05030107
100~1999
None
None
None
100~1999
None
None
100~1999
None
Intra RNC Softer Handover Inter RNC Soft Handover Interval Type 768~1280 Intra RNC Softer Handover Inter RNC Soft Handover Interval Type 768~1280
768~1280
chip
768~1280
chip
None
None ATM Transmission Introduction Package ATM Transmission Introduction Package ATM Transmission Introduction Package
0~15
None
WRFD050301
0~1399
None
WRFD050301
Enumeration Type
UNI(UNI), NNI(NNI)
UNI, NNI
None
WRFD050301
35000~120000
ms
None
None
0~65535
None
WRFD050104
TRUE(True), FALSE(False)
TRUE, FALSE
None
WRFD010101
3GPP Specifications
0~149
chip
None
None
Any Type
None
Valid command string, without the ';'at the end of the string. None
None
None
30~117924
None
WRFD010101
3GPP Specifications
0~15
None
WRFD05030101
OFF(OFF), ON(ON)
OFF, ON
None
None
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None
1~2147483646
None
WRFD050402
0~1199
None
None
None
Compound Type
2000-1-1~203712-31
None
Compound Type
2000-1-1~203712-31
None
Compound Type
2000-1-1~203712-31
None
7~90
None
None
Enumeration Type
1E-3, 1E-4, 1E-5, 1E-3, 1E-4, 1E-5, 1E- 1E-6, 1E-7, 1E-8, 6, 1E-7, 1E-8, 1E-9 1E-9 None
1~31
None
None
Enumeration Type
DISABLE, ENABLE
DISABLE, ENABLE
None
None
None
Enumeration Type
HIGH(HIGH), LOW(LOW)
HIGH, LOW
None
WRFD020802
OTDOA Based LCS Interval Type 0~63 SINGLE(Single NodeB), ALL(ALL NodeB) MBMS_REL(MBMS service), USER_REL(UE)
0~63
None
None
None
Enumeration Type
SINGLE, ALL
None
WRFD020107
Overload Control
Enumeration Type
MBMS_REL, USER_REL
None
None
None
1000~65535
None
None
None
1000~65535
None
None
None
IP Address Type
None
WRFD010616
MBMS Introduction Enumeration Package Service Steering Type and Load Sharing in RRC Connection Enumeration Setup Steering Type Service and Load Sharing in RRC Connection Enumeration Setup Type
D16, D32, D64, D128, 16, 32, 64, 128, D256 256
kbit/s
WRFD020120
ON, OFF
ON, OFF
None
WRFD020120
ON, OFF
ON, OFF
None
WRFD010616
WRFD010101
3GPP Specifications
SYSTEM(System Interval Type 0~4294967295 Command), SUPPORT_CS, CONFIG(Configuratio SUPPORT_PS, n Management), Enumeration SUPPORT_CS_AND MAINTAIN(Maintenan Type _PS ce Management), STAT(Statistic Measurement), Enumeration ALARM(Alarm Type Management)
0~4294967295
None
SUPPORT_CS, SUPPORT_PS, SUPPORT_CS_A ND_PS None SYSTEM, CONFIG, MAINTAIN, STAT, ALARM None
WRFD010616
Enumeration Type
STREAMING, BACKGROUND
STREAMING, BACKGROUND
None
Enumeration Type
UMTS(UMTS)
UMTS
None
WRFD020111
WRFD020120
Enumeration One Tunnel Service Steering Type and Load Sharing in RRC Connection Setup Interval Type Transmission Recourse Sharing on Enumeration Iub/Iur Interface Type HCS (Hierarchical Cell Structure) Inter-RAT Handover Based on Coverage
NO(GGSN), YES(SGSN)
NO, YES
None
WRFD02130406
WRFD021200
WRFD020303
Dedicated, RANSharing, MOCN None HO_TO_GSM_SH HO_TO_GSM_SHOU OULD_BE_PERF LD_BE_PERFORM, ORM, HO_TO_GSM_SHOU HO_TO_GSM_SH Interval Type -53~45 LD_NOT_BE_PERFO -105~91, step:2 OULD_NOT_BE_ dB RM, PERFORM, HO_TO_GSM_SHAL HO_TO_GSM_SH Enumeration L_NOT_BE_PERFOR ALL_NOT_BE_PE Type M RFORM None
0~255
None
Enumeration Type
None
Intra RNC Softer Handover Inter RNC Soft Handover Interval Type 0~63
0~63
None
WRFD020202 WRFD020203
Intra RNC Softer Handover Inter RNC Soft Handover Interval Type 0~120 Cell ID + RTT Function Based LCS Interval Type -24~0 Intra RNC Softer Handover Inter RNC Soft Handover Interval Type -24~0 CS_SHO_SWITCH, HSPA_SHO_SWITC H, Inter RNC Soft NON_HSPA_SHO_S Handover Bit Field Type WITCH Intra RNC Cell Update Inter RNC Cell Update Intra RNC Cell Update Inter RNC Cell Update
0~120
-24~0
dB
Enumeration Type
None
WRFD010401
WRFD010510
FALSE(Do not send), TRUE(Send) FALSE, TRUE None FACH, FACH, DCH_3.4K_SIGNALLI DCH_3.4K_SIGN System SIB2, SIB4, NG, ALLING, Information SIB2, SIB4, SIB12, DCH_6.8K_SIGNALLI SIB12, SIB18, DCH_6.8K_SIGN Broadcasting SIB11BIS None 3.4/6.8/13.6/27. Bit Field Type SIB18, SIB11BIS NG, ALLING, 2 kbit/s RRC DCH_13.6K_SIGNAL DCH_13.6K_SIGN Connection and LING, ALLING, RAB Enumeration DCH_27.2K_SIGNAL DCH_27.2K_SIGN Assignment Type LING ALLING None ATM Transmission Introduction Package
Enumeration Type
WRFD050301
0~186
None
WRFD050409
IP Transmission Introduction on Iu Interface Interval Type 0~186 IP Transmission Introduction on Iu Interface Interval Type 0~15
0~186
None
WRFD050409
0~15
None
WRFD020900
FALSE, TRUE
FALSE, TRUE
None
WRFD050301
WRFD020701
75K, NBAMR_BITRATE_5. WBAMR_BITRATE_6 15K, .60K, NBAMR_BITRATE_5. WBAMR_BITRATE_8 90K, .85K, NBAMR_BITRATE_6. WBAMR_BITRATE_1 70K, 2.65K, ATM NBAMR_BITRATE_7. WBAMR_BITRATE_1 Transmission 40K, 4.25K, Introduction NBAMR_BITRATE_7. WBAMR_BITRATE_1 Package Interval Type 0~15 95K, 5.85K, NBAMR_BITRATE_1 WBAMR_BITRATE_1 AMR/WB-AMR 0.20K, 8.25K, Speech Rates Enumeration NBAMR_BITRATE_1 WBAMR_BITRATE_1 Control Type 2.20K 9.85K, AMR/WB-AMR Speech Rates Enumeration Control Type Traffic Priority Mapping on Transport Traffic Priority Mapping on Transport WBAMR_BITRATE_2 3.05K, WBAMR_BITRATE_2 3.85K
None
kbit/s
WRFD020701
6.60, 8.85, 12.65, 14.25, 15.85, 18.25, 19.85, 23.05, 23.85 kbit/s
WRFD050424
Enumeration Type
kbit/s
WRFD050424
Enumeration Type
kbit/s
None
None
None
WRFD050406
WRFD050406
WRFD050404
WRFD050406
None CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, IP Address ATM QoS AF21, AF22, AF23, None None Introduction on Type AF31, AF32, AF33, Hub NodeB AF41, AF42, AF43, (Overbooking EF, LQBE, LQAF11, on Hub Node B ATM QoS LQAF12, LQAF13, Transmission) Interval Type 0~100RT_VBR, CBR, Introduction on LQAF21, LQAF22, NRT_VBR, UBR, BE, Hub NodeB LQAF23, LQAF31, AF11, AF12, AF13, (Overbooking LQAF32, LQAF33, on Hub Node B Enumeration AF21, AF22, AF23, LQAF41, LQAF42, AF31, AF32, AF33, Transmission) Type LQAF43, LQEF AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, ATM/IP Dual ATM QoS LQAF21, LQAF22, Stack Node B Interval Type 0~100 LQAF31, Introduction on LQAF23, Hub NodeB LQAF32, LQAF33, (Overbooking LQAF41, LQAF42, on Hub Node B Enumeration LQAF43, LQEF, Transmission) Type NULL
IP Address Type
0.0.0.0~255.255.2 CBR, RT_VBR, 55.255 NRT_VBR, UBR, None BE, AF11, AF12, AF13, AF21, AF22, AF23, 0.0.0.0~255.255.2 AF31, AF32, 55.255 None AF33, AF41, AF42, AF43, EF, CBR, RT_VBR, LQBE, LQAF11, NRT_VBR, UBR, LQAF12, LQAF13, 0~100 LQAF22, per cent BE, AF11, LQAF21, AF12, AF13, AF21, LQAF23, LQAF31, AF22, AF23, LQAF32, LQAF33, AF31, AF32, LQAF41, LQAF42, AF33, AF41, LQAF43, LQEF None AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, 0~100 LQAF31, None LQAF23, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL None
WRFD050404
0~100
None
WRFD050406
ATM QoS Introduction on Hub NodeB (Overbooking on Hub Node B Transmission) Interval Type 0~100 HCS (Hierarchical Cell Structure) Physical Channel Management Physical Channel Management Physical Channel Management Physical Channel Management Physical Channel Management Physical Channel Management
0~100
per cent
WRFD021200
-32~20, step:2
dB
WRFD022000
Enumeration Type
D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, 0, 1, 2, 3, 4, 5, 6, D10, D11, D12, D13, 7, 8, 9, 10, 11, 12, D14, D15, D16, D17 13, 14, 15, 16, 17 None
WRFD022000
0~3
None
WRFD022000
0~3
None
WRFD022000
0~3
None
WRFD022000
Interval Type 0~3 B0000(B0000), B0001(B0001), D1, D2, D3, D4 B0010(B0010), B0011(B0011), B0100(B0100), B0101(B0101), B0110(B0110), Interval Type 30~100 B0111(B0111), B1000(B1000), B1001(B1001), B1010(B1010), Interval Type 30~100 B1011(B1011), B1100(B1100), B1101(B1101), Enumeration B1110(B1110), Type B1111(B1111) DATE(Input with Enumeration Type Enumeration Type date), WEEK(Input with week), DATEWEEK(Input with date and week)
0~3
None
WRFD022000
None
WRFD040100
Flow Control
30~100 B0000, B0001, B0010, B0011, B0100, B0101, 30~100 B0111, B0110, B1000, B1001, B1010, B1011, B1100, B1101, B1110, B1111
per cent
WRFD040100
per cent
WRFD050301
None
None
Cell ID + RTT Function Based LCS OTDOA Based LCS CELLID_CENTER, A-GPS, OTDOA, JAN(January), A-GPS Based CELLID_RTT, CELLID_RTT, FEB(February), LCS Bit Field Type OTDOA, AGPS CELLID_CENTER None MAR(March), APR(April), MAY(May), Faulty Enumeration CLOSE(Close), JUN(June), JUL(July), MRFD-210304 Management Type OPEN(Open) CLOSE, OPEN None AUG(August), SEP(September), JAN, FEB, MAR, OCT(October), APR, MAY, JUN, Configuration Enumeration NOV(November), JUL, AUG, SEP, MRFD-210301 Management Type DEC(December) OCT, NOV, DEC None WRFD020801 WRFD020802 WRFD020803
WRFD040100
Flow Control
30~100
per cent
WRFD040100
Flow Control
30~100
per cent
30~100
per cent
30~100
per cent
30~100
per cent
30~100
per cent
WRFD040100
Flow Control
2~2000
None
0~27
None
None
None
0, 2, 4, 8, 10, 12, 0,2,4,8,10,12,14,16,1 14, 16, 18, 20, 22, Interval Type 8,20,22,24,26 24, 26 None
None
None
0, 2, 4, 8, 10, 12, 0,2,4,8,10,12,14,16,1 14, 16, 18, 20, 22, Interval Type 8,20,22,24,26 24, 26 None 0, 2, 4, 8, 10, 12, 0,2,4,8,10,12,14,16,1 14, 16, 18, 20, 22, Interval Type 8,20,22,24,26 24, 26 None
None
None
None
None
0~5, 8~27
None
0, 2, 4, 6, 8, 10, 0,2,4,6,8,10,12,14,16, 12, 14, 16, 18, 20, Interval Type 18,20,22,24,26 22, 24, 26 None 0, 2, 4, 6, 8, 10, 0,2,4,6,8,10,12,14,16, 12, 14, 16, 18, 20, Interval Type 18,20,22,24,26 22, 24, 26 None 0, 2, 4, 8, 10, 12, 0,2,4,8,10,12,14,16,1 14, 16, 18, 20, 22, Interval Type 8,20,22,24,26 24, 26 None
None
None
None
None
0~27
None
0~27
None
None
None
0, 2, 4, 8, 10, 12, 0,2,4,8,10,12,14,16,1 14, 16, 18, 20, 22, Interval Type 8,20,22,24,26 24, 26 None
None
None
0~5, 8~27
None
None
None
{0, 2, 4, 8, 10, 12, 0,2,4,8,10,12,14,16,1 14, 16, 18, 20, 22, Interval Type 8,20,22,24,26 24, 26} None
WRFD021301
0~65535
None
Shared Network Support in Inter-RAT Connected Enumeration Handover Mode on Type Based Service Inter-RAT Handover Enumeration Based on Load Type
TRUE, FALSE
TRUE, FALSE
None
OFF, ON
OFF, ON
None
None
None ATM Transmission Introduction Package ATM Transmission Introduction Package ATM Transmission Introduction Package HCS (Hierarchical Cell Structure) ATM Transmission Introduction Package
1~60
min
WRFD050301
WRFD050301
Enumeration Type
None
WRFD050301
String Type
None
1~11 characters
None
WRFD021200
Enumeration Type
OFF, ON
OFF, ON
None
WRFD050301
Enumeration Type
None
None
None
Enumeration Type
1000M(1000M), AUTO(AUTO)
1000M, AUTO
None
WRFD010801
Intra RNC Cell Update Service Differentiation based on SPI weight HCS (Hierarchical Cell Structure)
None
WRFD020806
1~8
None
WRFD021200
1~8
None
WRFD020806
Service Differentiation based on SPI weight Service Differentiation based on SPI weight
2~11
None
WRFD020806
0~15
None
None
None
1024~3584
None
None
None
Enumeration Type
YES, NO
None
WRFD020105
0~1, step:0.01
per cent
WRFD020105
0~1, step:0.01
per cent
WRFD020105
0~1, step:0.01
per cent
WRFD010101
WRFD010510
3GPP DCH(UL_DCH,DL_D Specifications Interval Type 0~4 0~4 3.4/6.8/13.6/27. CH), 2 kbit/s RRC HSDPA(UL_DCH,DL Connection and _HSDSCH), RAB Enumeration HSPA(UL_EDCH,DL_ DCH, HSDPA, Assignment HSDSCH) HSPA 3.4/6.8/13.6/27. Type 2 kbit/s RRC Connection and RAB QoS Enumeration ATM Assignment on Type Introduction
None
None
WRFD010510
TRUE, FALSE
TRUE, FALSE
None
WRFD050406
0~100
per cent
WRFD010688
Enhanced CELL-FACH
1~1000
kbit/s
WRFD010688
WRFD050406
WRFD050404
WRFD050406
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, Enhanced ATM QoS LQAF12, LQAF13, CELL-FACHon Interval Type 1~2000 LQAF22, CBR, RT_VBR, Introduction LQAF21, NRT_VBR, UBR, BE, Hub NodeB LQAF23, LQAF31, AF11, AF12, AF13, (Overbooking LQAF32, LQAF33, on Hub Node B Enumeration AF21, AF22, AF23, LQAF41, LQAF42, AF31, AF32, AF33, Transmission) Type LQAF43, LQEF AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, ATM/IP Dual ATM QoS LQAF21, LQAF22, Stack Node B Interval Type 0~100 LQAF31, Introduction on LQAF23, Hub NodeB LQAF32, LQAF33, (Overbooking LQAF41, LQAF42, on Hub Node B Enumeration LQAF43, LQEF, Transmission) Type NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, CBR, RT_VBR, LQBE, LQAF11, NRT_VBR, UBR, LQAF12, LQAF13, 1~2000 LQAF22, kbit/s BE, AF11, LQAF21, AF12, AF13, AF21, LQAF23, LQAF31, AF22, AF23, LQAF32, LQAF33, AF31, AF32, LQAF41, LQAF42, AF33, AF41, LQAF43, LQEF None AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, 0~100 LQAF31, None LQAF23, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL None
WRFD050404
ATM/IP Dual ATM QoS Stack Node B Interval Type 0~100 Introduction on Hub NodeB (Overbooking on Hub Node B Transmission) Interval Type
0~100
None
WRFD050406
None
None
String Type
None
None
Interval Type
None
None
Interval Type
BITS1-2MHZ(2MHZ Building Integrated Timing Supply system 0~100 0~100 1), BITS22MHZ(2MHZ Building Integrated Timing Supply system 2), None 1~100 characters BITS12MBPS(2MBPS Building Integrated Timing Supply system 1), BITS21~4 1~4 2MBPS(2MBPS Building Integrated Timing Supply system 2), 8KHZ(8KHZ), 1~4 1~4 GPS(Globe Positioning System), LINE1_8KHZ(8KHZ line1), LINE2_8KHZ(8KHZ 1~1000 1~1000 line2), BITS1BITS1-2MHZ, T1BPS(T1BPS BITS2-2MHZ, Building Integrated BITS1-2MBPS, Timing Supply system BITS2-2MBPS, 0~335 0~3358KHZ, 1), BITS2GPS, T1BPS(T1BPS LINE1_8KHZ, Building Integrated LINE2_8KHZ, Timing Supply system BITS1-T1BPS, 2) BITS2-T1BPS
per cent
None
None
None
None
None
None
None
TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, Bit Field Type TS30, TS31
TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31
None
WRFD050301
45~90
min
0~11
None
1~11
None
None
None
0~11
None
None
None
0~11
None
None
None
0~11
None
None
None
0~11
None
None
None
0~11
None
None
None
0~11
None
0~11
None
None
None
0~11
None
None
None
0~11
None
String Type
None
WRFD021101
Dynamic Channel Configuration Enumeration Control (DCCC) Type SRNS Relocation (UE Enumeration Not Involved) Type SRNS Relocation (UE Not Involved)
NO, YES RT(Real time service), NRT(Non real time service), ALL(All service)
NO, YES
None
WRFD02060501 WRFD02060501
None
Interval Type 0~400 SRNS SRNS Relocation (UE Relocation Not Involved) Introduction Package SRNS Relocation (UE Not Involved) SRNS Relocation with SRNS Hard Handover Relocation (UE SRNS Not Involved) Relocation with Cell/URA Update Lossless SRNS Relocation
0~400
ms
WRFD02060501
1~255
SRNSR_DSCR_I UR_RESRCE_SW ITCH, Interval Type 1~100 1~100 s SRNSR_DSCR_IUR_ SRNSR_DSCR_L RESRCE_SWITCH, OC_SEPRAT_SW SRNSR_DSCR_LOC ITCH, _SEPRAT_SWITCH, SRNSR_DSCR_P Interval Type 1~255 SRNSR_DSCR_PRO 1~255 ROPG_DELAY_S s PG_DELAY_SWITCH WITCH, , SRNSR_DSCR_S SRNSR_DSCR_SEP EPRAT_DUR_SW Bit Field Type RAT_DUR_SWITCH ITCH None
WRFD02060501
1~65535
MPS, EPS
MPS, EPS
None
Enumeration Type
DES(Descent), ASC(Ascent)
DES, ASC
None
WRFD020501
dB
20~99
per cent
WRFDConversational 010501 QoS Class Faulty WRFDStreaming QoS MRFD-210304 Management Interval Type 30~100 010502 Class WRFDInteractive QoS 010503 Class WRFDBackground Enumeration SPEECH, 010504 QoS Class Type UNKNOWN
30~100
per cent
SPEECH, UNKNOWN
None
20~99
per cent
30~100
per cent
WRFD021200
-105~91, step:2
dB
WRFD010801
dB
0~7
None
None
None
0~3
None
None
None
0~7
None
1~2147483646
None
Compound Type
Compound Type
None
None
None
Compound Type
hour, min
None
Compound Type
None
Compound Type
00:00:00~23:59:5 9 None
Compound Type
Dynamic Channel Enumeration Configuration None (DCCC) Type Control Inter-RAT Handover Based on DL QoS Interval Type
1~512
1~512
None
1~65535
None
OTDOA Based LCS A-GPS Based Enumeration LCS Type Multi-Carrier Switch off Based on Traffic Compound Load Type Multi-Carrier Switch off Based on Traffic Compound Load Type
INACTIVE, ACTIVE
INACTIVE, ACTIVE
None
WRFD020117
HOUR, MIN
00:00~23:59
min
WRFD020117
HOUR, MIN
00:00~23:59
min
WRFD020117
HOUR, MIN
00:00~23:59
min
WRFD010101
3GPP Specifications
1000~300000
ms
WRFD010101
1~300
None
WRFD050301
3~67
None
Security MRFD-210305 Management ATM Transmission Introduction Package Traffic Priority Mapping on Transport
Compound Type
2000-1-1~203712-31
None
WRFD050301
Enumeration Type
OFF(OFF), ON(ON) D0, D8, D16, D32, D64, D128, D144, D256, D384
OFF, ON
None
WRFD050424
Enumeration Type
D0, D8, D16, D32, D64, D128, D144, D256, D384 kbit/s
WRFD010688
Enhanced CELL-FACH
Interval Type 1~1000 D8, D16, D32, D64, D128, D144, D256, D384, D608
1~1000
kbit/s
WRFD010632
WRFD010688
Interval Type 1~2000 D0, D8, D16, D32, D64, D128, D144, D256, D384
1~2000
kbit/s
WRFD050424
Enumeration Type
D0, D8, D16, D32, D64, D128, D144, D256, D384 kbit/s
Compound Type
00:00:00~23:59:5 9 None
WRFD022000
Enumeration Type
TRUE, FALSE
TRUE, FALSE
None
Enumeration Type
STTD_Supported, STTD_Supported, STTD_not_Suppo STTD_not_Supported rted None STTD_Supported, STTD_not_Suppo rted None
Conversational Physical QoS Class Channel QoS Enumeration STTD_Supported, Streaming Management Type STTD_not_Supported Class Interactive QoS Class Background QoS Class IP Interval Type 0~2 FP MUX for Transmission UDP MUX for Iu-CS Transmission
0~2
None
16~1023
byte
None
None
1~50
None
None
None
1~124, 128~189
None
WRFD011000
Cell Broadcast Enumeration Service 3.4/6.8/13.6/27. Type 2 kbit/s RRC Connection and RAB Enumeration Assignment Type
TRUE, FALSE
TRUE, FALSE
None
WRFD010510
FALSE, TRUE
FALSE, TRUE
None
WRFD020203
Inter RNC Soft Enumeration Handover 3.4/6.8/13.6/27. Type 2 kbit/s RRC Connection and RAB Enumeration Assignment Type
FALSE, TRUE
TRUE, FALSE
None
WRFD010510
FALSE, TRUE
FALSE, TRUE
None
WRFD010101
3GPP Specifications
Enumeration Type
NO, YES
NO, YES
None
WRFD010101
3GPP Specifications
Enumeration Type
CR527_SUPPOR T, CR527_NOT_SU CR527_SUPPORT, PPORT, CR527_NOT_SUPPO CR528_SUPPOR RT, T, CR528_SUPPORT, CR528_NOT_SU NO(NO), YES(YES) NO, YES None CR528_NOT_SUPPO PPORT, RT, CR529_SUPPOR CR529_SUPPORT, T, CR529_NOT_SUPPO CR529_NOT_SU RT PPORT None
WRFD02030802
PS Handover Between UMTS Enumeration and GPRS Type Streaming Traffic Class on Enumeration HSDPA Type NACC(Network Assisted Cell Enumeration Change) Type
FALSE, TRUE
FALSE, TRUE
None
WRFD010630
FALSE, TRUE
FALSE, TRUE
None
WRFD02030801
FALSE, TRUE
FALSE, TRUE
None
Enumeration Type
CLOSE(CLOSE), OPEN(OPEN) SUN(Sunday), MON(Monday), ON, OFF TUE(Tuesday), WED(Wednesday), THU(Thursday), FRI(Friday), SAT(Saturday)
CLOSE, OPEN
None
None
None
Enumeration Type
ON, OFF
None
Enumeration Type
Enumeration Type
CLOSE, OPEN
CLOSE, OPEN
None
None
None
Enumeration Type
ON(ON), OFF(OFF)
ON, OFF
None
Enumeration Type
ON(ON), OFF(OFF)
ON, OFF
None
None
None
Enumeration Type
BFD_OFF(OFF), BFD_ON(ON)
BFD_OFF, BFD_ON
None
WRFD010101
3GPP Specifications
Enumeration Type
OFF, ON
OFF, ON
None
WRFD050403
Enumeration Type
NO(NO), YES(YES)
NO, YES
None
WRFD050403
1~254
None
None
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None
None
None
0~4294967295
None
None
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None
None
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None
None
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None
None
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None
None
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None
None
None
0~4294967295
None
None
None
0~4294967295
None
None
None
0~4294967295
None
Enumeration Type
Enumeration Type
OFF, ON
None
Enumeration Type
TRUE, FALSE
TRUE, FALSE
None
WRFD040100
Flow Control
1~500
None
String Type
None
String Type
None
WRFD040100
Flow Control
1~500
None
WRFD010101
3GPP Specifications
1~255
min
String Type
None
String Type
None
WRFD040100
Flow Control
1~500
None
String Type
None
WRFD040100
Flow Control ATM Transmission Introduction Package ATM Transmission Introduction Package ATM Transmission Introduction Package ATM Transmission Introduction Package ATM Transmission Introduction Package ATM Transmission Introduction Package ATM Transmission Introduction Package ATM Transmission Introduction Package ATM Transmission Introduction Package
1~500
None
WRFD050301
30000~60000
ms
WRFD050301
800~1500
ms
WRFD050301
800~1500
ms
WRFD050301
2000~3000
ms
WRFD050301
800~1500
ms
WRFD050301
800~1200
ms
WRFD050301
180000~360000
ms
WRFD050301
Interval Type 180000~360000 D100, D200, D400, D600, D800, D1000, Interval Type 1400~2000 D1200, D1400, D1600, D1800, D2000, D3000, Enumeration D4000, D6000, Type D8000
180000~360000 D100, D200, D400, D600, D800, D1000, 1400~2000 D1200, D1400, D1600, D1800, D2000, D3000, D4000, D6000, D8000
ms
WRFD050301
ms
WRFD010101
3GPP Specifications
ms
WRFD010101
3GPP Specifications
Enumeration Type
D100, D200, D400, D600, D800, D1000, D1200, D1400, D1600, D1800, D2000, D3000, D4000, D6000, D8000
D100, D200, D400, D600, D800, D1000, D1200, D1400, D1600, D1800, D2000, D3000, D4000, D6000, D8000 D100, D200, D400, D1000, D2000
ms
WRFD010101
3GPP Specifications
Enumeration Type
D100, D200, D400, D1000, D2000 INFINITY, D5, D10, D30, D60, D120, D360, D720
ms
WRFD010101
3GPP Specifications
Enumeration Type
INFINITY, D5, D10, D30, D60, D120, D360, D720 min D5, D10, D15, D20, D30, D40, D50
WRFD010101
3GPP Specifications
Enumeration Type
WRFD010101
3GPP Specifications
Enumeration Type
ms
WRFD010101
3GPP Specifications
1~8
WRFD010101
3GPP Specifications
1~15
WRFD010101
3GPP Specifications
WRFD010101
3GPP Specifications
Enumeration Type
WRFD010101
3GPP Specifications
Enumeration Type
D0, D10, D30, D60, D0, D10, D30, D180, D600, D1200, D60, D180, D600, D1800 D1200, D1800 s D0, D10, D20, D30, D40, D50, INFINITY
WRFD010101
3GPP Specifications
Enumeration Type
WRFD010101
3GPP Specifications
0~1530 step:6
min
WRFD010101
3GPP Specifications ATM Transmission Introduction Package ATM Transmission Introduction Package ATM Transmission Introduction Package ATM Transmission Introduction Package
Enumeration Type
D0, D100, D200, D300, D400, D0, D100, D200, D500, D600, D300, D400, D500, D700, D800, D600, D700, D800, D900, D1000, D900, D1000, D1200, D1200, D1500, D1500, D2000 D2000
ms
WRFD050301
800~1200
ms
WRFD050301
800~1200
ms
WRFD050301
800~1200
ms
WRFD050301
800~1200
ms
WRFD010688
Enhanced CELL-FACH
WRFD020302
Inter Frequency Hard Handover Based on Coverage Interval Type -24~0 Inter Frequency Hard Handover Based on Coverage Interval Type -115~-25 Inter Frequency Hard Handover Based on Coverage Interval Type -24~0 Inter Frequency Hard Handover Based on Coverage Interval Type -115~-25 Inter Frequency Hard Handover Based on Coverage Interval Type -24~0 Inter Frequency Hard Handover Based on Coverage Interval Type -115~-25
-24~0
dB
WRFD020302
-115~-25
dBm
WRFD020302
-24~0
dB
WRFD020302
-115~-25
dBm
WRFD020302
-24~0
dB
WRFD020302
-115~-25
dBm
WRFD020303
Inter-RAT Handover Based on Coverage Inter-RAT Handover Based on Coverage Inter-RAT Handover Based on Coverage
lower than -110, -110~-48(Actual value meets the condition: Actual Value than -110, lower = GUI Value - 111) -110~-48(Actual dBm value meets the condition: Actual Value than -110, lower = GUI Value - 111) -110~-48(Actual dBm value meets the condition: Actual Value = GUI Value - 111) dBm
WRFD020303
WRFD020303
None
None CPC - HSSCCH less operation Transport Channel Management Transport Channel Management Transport Channel Management Transport Channel Management Transport Channel Management Transport Channel Management Transport Channel Management
1~12
None
WRFD010687
Enumeration Type
0, 1, 2, 3, 4
None
WRFD021000
0~512
None
WRFD021000
0~1
None
WRFD021000
0~512
None
WRFD021000
0~512
None
WRFD021000
Interval Type
1 None
WRFD021000
0~512
None
WRFD021000
0~512
None
WRFD010687
CPC - HSSCCH less operation CPC - HSSCCH less operation CPC - HSSCCH less operation CPC - HSSCCH less operation ATM Transmission Introduction Package Physical Channel Management
WRFD010687
WRFD010687
WRFD010687
WRFD050301
38, 39, 40, 41, 42, 18, 19, 20, 21, 22, 43, 44, 45, 46, 47, 23, 24, 4, 5, 6, 7, 1, 2, 3, 25, 26, 27, 48, 49, 50, 51, 52, 28, 29, 30, 31, 32, 8, 9, 10, 11, 12, 53, 54, 55, 56, 57, 33, 34, 35, 36, 37, 13, 14, 15, 16, 17, 58, 59, 60, 61, 62, 38, 39, 40, 41, 42, 18, 19, 20, 21, 22, 63, 64, 65, 66, 67, 43, 44, 45, 46, 47, 23, 24, 4, 5, 6, 7, 68, 69, 25, 26, 27, 1, 2, 3, 50, 51, 52, 48, 49, 70, 71, 72, 28, 29, 30, 31, 32, 73, 74, 75, 76, 77, 8, 9, 10, 11, 12, 53, 54, 55, 56, 57, 33, 34, 35, 36, 37, 78, 79, 80, 81, 82, 13, 14, 15, 16, 17, 58, 59, 60, 61, 62, 38, 39, 40, 41, 42, Enumeration 83, 84, 85, 86, 87, 18, 19, 20, 21, 22, 63, 64, 65, 66, 67, 43, 44, 45, 26, 27, Type 88, 89, 90 46, 47, 23, 24, 25, 68, 69, 70, 71, 72, 48, 49, 50, 51, 52, 28, 29, 30, 31, 32, 73, 74, 75, 76, 77, 53, 54, 55, 56, 57, 33, 34, 35, 36, 37, 78, 79, 80, 81, 82, 58, 59, 60, 61, 62, 38, 39, 40, 41, 42, Enumeration 83, 84, 85, 86, 87, 63, 64, 65, 66, 67, 43, 44, 45, Type 88, 89, 90 46, 47, 68, 69, 70, 71, 72, 48, 49, 50, 51, 52, 73, 74, 75, 76, 77, 53, 54, 55, 56, 57, 78, 79, 80, 81, 82, 58, 59, 60, 61, 62, Enumeration 83, 84, 85, 86, 87, 63, 64, 65, 66, 67, Type 88, 89, 90 71, 72, 68, 69, 70, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, Enumeration 83, 84, 85, 86, 87, Type 88, 89, 90 CHIP0, CHIP256, CHIP512, CHIP0, CHIP256, CHIP768, CHIP512, CHIP768, CHIP1024, Interval Type 1~254 1~254 CHIP1024, CHIP1280, CHIP1280, CHIP1536, CHIP1536, CHIP1792, Enumeration CHIP1792, CHIP2048, Type CHIP2048, CHIP2304 CHIP2304
D11, D12, D13, D14, D47, D48, D49, D50, D31, D32, D33, D34, D15, D16, D17, D18, D51, D52, D53, D54, D35, D36, D37, D38, D19, D20, D21, D22, D55, D56, D57, D58, D1, D2, D3, D4, D42, D5, D39, D40, D41, D26, D23, D24, D25, D10, D59, D60, D61, D62, D6, D7, D8, D9, D46, D43, D44, D45, D30, D27, D28, D29, D14, D63, D64, D65, D66, D11, D12, D13, D47, D48, D49, D50, D31, D32, D33, D34, D67, D68, D69, D70, D15, D16, D17, D18, D51, D52, D53, D54, D35, D36, D37, D38, D71, D72, D73, D74, D19, D20, D21, D22, D55, D56, D57, D58, D39, D40, D41, D42, D75, D76, D77, D78, D23, D24, D25, D26, D59, D60, D61, D62, D43, D44, D45, D46, D79, D80, D81, D82, D27, D28, D29, D30, D63, D64, D65, D66, D47, D48, D49, D50, D83, D84, D85, D86, D31, D32, D33, D34, D67, D68, D69, D70, D51, D52, D53, D54, D87, D88, D89, D90 D35, D36, D37, D38, D71, D72, D73, D74, D55, D56, D57, D58, D39, D40, D41, D42, D75, D76, D77, D78, D59, D60, D61, D62, D43, D44, D45, D46, D79, D80, D81, D82, D63, D64, D65, D66, D47, D48, D49, D50, D83, D84, D85, D86, D67, D68, D69, D70, D51, D52, D53, D54, D87, D88, D89, D90 D71, D72, D73, D74, D55, D56, D57, D58, D75, D76, D77, D78, D59, D60, D61, D62, D79, D80, D81, D82, D63, D64, D65, D66, D83, D84, D85, D86, D67, D68, D69, D70, D87, D88, D89, D90 D71, D72, D73, D74, D75, D76, D77, D78, D79, D80, D81, D82, D83, D84, D85, D86, D87, D88, D89, D90
None
None
None
None
None
chip
Intra RNC Softer Handover Inter RNC Soft Handover Interval Type 0~65535 ATM Transmission Introduction Package HCS (Hierarchical Cell Structure) HCS (Hierarchical Cell Structure)
0~65535
None
WRFD050301
WRFD021200
NOT_USED, D30(30 Interval Type 1~15 1~15 None seconds), D60(60 seconds), D120(120 NOT_USED, D10(10 seconds), D180(180 seconds), D20(20 Enumeration seconds), D240(240 NOT_USED, 30, seconds), D30(30 Type seconds) D40(40 60, 120, 180, 240 s seconds), Enumeration Type seconds), D10(10 NotUsed, D50(50 seconds), D60(60 seconds), D20(20 seconds), D70(70 seconds), D30(30 seconds) D40(40 seconds), seconds), D50(50 seconds), D60(60 seconds), D30(30 NotUsed, D70(70 seconds) D60(60 seconds), seconds), D120(120 seconds), D180(180 seconds), D240(240 seconds) NOT_USED, 10, 20, 30, 40, 50, 60, 70 s
WRFD021200
WRFD010801
Enumeration Type
WRFD010801
Enumeration Type
WRFD021200
0~255
Enumeration Type
CLOSE(Close), OPEN(Open)
CLOSE, OPEN
None
String Type
None
1~9 characters
degree Celsius
Faulty MRFD-210304 Management HCS AMR/WB-AMR (Hierarchical Speech Rates Cell Structure) Control Inter Frequency Dynamic HCS Handover Hard Channel (Hierarchical Based on DL Configuration Cell Structure) QoS (DCCC) Control Inter-RAT Inter Frequency Handover Hard Handover Based on DL Based on DL QoS QoS Inter-RAT Handover Based on DL QoS
String Type
None
1~9 characters
degree Celsius
WRFD021200
Enumeration Type
D3~0 D6~1 D9~2 D12~3 D15~4 D18~5 3, 6, 9, 12, 15, 18, D21~6 INFINITY 21, INFINITY dB D2~0 D3~1 D4~2 D6~3 D8~4 D10~5 D12~6 INFINITY
Enumeration Type
dB
10~60000, step: 10
ms
10~60000, step: 10
ms
WRFD021101
10~60000, step: 10
ms
WRFD020102
Load Measurement
10~60000, step:10 ms
WRFD020102
Load Measurement
10~60000, step:10 ms
WRFD020102
Load Measurement
10~60000, step:10 ms
WRFD020102
Load Measurement
10~60000, step:10 ms
WRFD020102
Load Measurement
10~60000, step:10 ms
WRFD020102
Load Measurement
10~60000, step:10 ms
WRFD020102
Load Measurement
10~60000, step:10 ms
WRFD020102
Load Measurement
10~60000, step:10 ms
WRFD020304
Inter Frequency Hard Handover Based on DL QoS Interval Type 1~6000 HCS (Hierarchical Cell Structure) Physical Channel Management Transport Channel Management Transport Channel Management
10~60000, step: 10
ms
WRFD021200
0~511
WRFD022000
Enumeration Type
EXISTS, NOT_EXISTS
EXISTS, NOT_EXISTS
None
WRFD021000
Enumeration Type
D1, D2, D3
1, 2, 3
None
WRFD021000
Enumeration Type
1~2
None
None
None
Enumeration Type
ACTIVE, STANDBY
None
None
None
0~255
None
None
None
IP Address Type
None
None
None
IP Address Type
None
None
None WRFD020701 WRFDWRFD021101 021101 WRFDWRFD020304 020701 WRFDWRFD020309 021101 WRFD020304 WRFD020309
AMR/WB-AMR None Rates Speech Control Dynamic Channel AMR/WB-AMR Configuration None Rates Speech Control (DCCC) Control Dynamic Inter Frequency Dynamic Channel Hard Handover Channel Configuration Based on DL Configuration Control (DCCC) QoS (DCCC) Control Inter-RAT Inter Frequency Handover Hard Handover Based on DL Based on DL QoS QoS Inter-RAT Handover Based on DL QoS Traffic Priority Mapping on Transport Traffic Priority Mapping on Transport Traffic Priority Mapping on Transport Traffic Priority Mapping on Transport Traffic Priority Mapping on Transport
0~5, 8~27
None
0~11
None
1~512
None
dB
dB
WRFD050424
1~15
None
WRFD050424
Enumeration Type
None
WRFD050424
Enumeration Type
None
WRFD050424
Enumeration Type
None
WRFD050424
Enumeration Type
None
WRFD050424
Traffic Priority Mapping on Transport Traffic Priority Mapping on Transport Traffic Priority Mapping on Transport Traffic Priority Mapping on Transport Traffic Priority Mapping on Transport Traffic Priority Mapping on Transport Traffic Priority Mapping on Transport Traffic Priority Mapping on Transport Traffic Priority Mapping on Transport Traffic Priority Mapping on Transport Traffic Priority Mapping on Transport Traffic Priority Mapping on Transport
Enumeration Type
None
WRFD050424
Enumeration Type
None
WRFD050424
Enumeration Type
None
WRFD050424
Enumeration Type
None
WRFD050424
Enumeration Type
None
WRFD050424
Enumeration Type
None
WRFD050424
Enumeration Type
None
WRFD050424
Enumeration Type
None
WRFD050424
Enumeration Type
None
WRFD050424
Enumeration Type
None
WRFD050424
Enumeration Type
None
WRFD050424
Enumeration Type
None
None
None
Enumeration Type
None
Enumeration Type
NOLIMIT, LIMIT
None
None
None
Compound Type
00:00:00~23:59:5 9 None
None
None
200~10000
ms
None
None
1~65535
ms
None
None
1~3
None
None
1~10
WRFD020101
1~3600
WRFD050301
1~64, step:0.05
ms
None
None
1~1024
None
WRFD020302
0~1000
ms
WRFD040100
Flow Control
0~500000
ms
WRFD020302
Inter Frequency Hard Handover Based on Enumeration Coverage Type Inter Frequency Hard Handover Based on Enumeration Coverage Type Inter Frequency Hard Handover Based on Enumeration Coverage Type Inter-RAT Handover Based on Coverage
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560,D40, D0, D10, D20, D5000 D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560,D40, D0, D10, D20, D5000 D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 20, 40, 60, ms 0, 10, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 20, 40, 60, ms 0, 10, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 ms
WRFD020302
WRFD020302
WRFD020303
0~64000, 65535
ms
WRFD020302
Inter Frequency Hard Handover Based on Coverage Interval Type 0~64000 Inter-RAT Handover Based on Coverage D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, Interval Type 0~64000 D240, D320, D640, Dynamic D1280, D2560,D40, D0, D10, D20, Channel D5000, D10000, D60, D80, D100, Configuration Enumeration D15000, D20000, D120, D160, D200, Control (DCCC) Type D25000, D30000 D240, D320, D640, Dynamic Channel Configuration Enumeration Control (DCCC) Type D1280, D2560, D5000, D10000, D15000, D20000, D25000, D30000
0~64000
ms
WRFD020303
WRFD021101
0, 10, 20, 40, 60, 80, 100, 120, 160, 0~64000 320, ms 200, 240, 640, 1280, 2560, 5000, 20, 40, 60, 0, 10, 10000, 15000, 20000, 80, 100, 120, 160, 25000, 30000 ms 200, 240, 320, 640, 1280, 2560, 5000, 10000, 15000, 20000, 25000, 30000
WRFD021101
ms
WRFD040100
Flow Control
1~100
None
WRFD040100
Flow Control
1~100
None
7~365
None
None
Compound Type
hour, min
00:00~23:59
None
None
None
Compound Type
hour, min
00:00~23:59
None
None
None
Compound Type
hour, min
00:00~23:59
None
None
None
Compound Type
hour, min
00:00~23:59
None
None
None
Compound Type
hour, min
00:00~23:59
None
None
WRFD050406
Compound ATM QoS None hour, min Introduction on Type Hub NodeB (Overbooking on Hub Node B Transmission) Interval Type 14~163
00:00~23:59
None
14~163
None
WRFD021305
0~163
None
WRFD021305
0~163
None
WRFD021305
0~163
None
0~100
per cent
0~100
per cent
WRFD050301
8000~12000
ms
WRFD050301
ATM Configuration Transmission MRFD-210301 Management Introduction WRFDPackage 050301 IP Transmission ATM WRFDIntroduction on Enumeration Transmission 050410 Iur Interface Type Introduction WRFD050301 WRFD050409 Package IP Transmission Introduction on Enumeration Iu Interface Type IP Transmission Introduction on Enumeration Iub Interface Type
TYPSRBSEMISTATI CTF, TYPSRBTMRLCPAR AS, TYPSRBTOAWPARA S, UECONNECTEDMO DETIMERCONST, UEIDLEMODETIMER CONST, Interval Type 30000~90000 USERGBRMAPINFO, 30000~90000 USERPRIORITYMAP , Enumeration UTRANREGISTERIN Type FO, WPSALGO 0~276
ms
None
WRFD050402
ATM_TRANS, ATM_TRANS(ATM IP_TRANS circuit transmission), IP_TRANS(IP transmission), ATM_TRANS, ATMANDIP_TRANS( IP_TRANS ATM and IP transmission), HYBRID_IP_TRANS( Hybrid IP transmission)
ATM_TRANS, IP_TRANS
None
None
Configuration MRFD-210301 Management Physical Channel Management Physical Channel Management Physical Channel Management Physical Channel Management
-120~-1, 1~120
min
WRFD022000
0~2559
ms
WRFD022000
0~2559
ms
WRFD022000
0~1279
ms
WRFD022000
0~1279
ms
WRFD020117
Multi-Carrier Switch off Based on Traffic Load Interval Type 0~5 NORMAL(TXT FORMAT), FORMAT(BIN FORMAT)
0~5
None
None
None
Enumeration Type
NORMAL, FORMAT
None
WRFD021200
Enumeration Type
WRFD040100
Flow Control
30~100
per cent
WRFD040100
Flow Control
30~100
per cent
WRFD040100
Flow Control
30~100
per cent
Flow Control Conversational QoS Class Streaming QoS Flow Control Class Interactive QoS Class Background QoS Class Traffic Priority Mapping on Transport Traffic Priority Mapping on Transport
30~100
per cent
Enumeration Type
ON, OFF
None
Enumeration Type
WRFD050424
Enumeration Type
INTERACTIVE, BACKGROUND INTERACTIVE, BACKGROUND, IMSSIGNALLING CONVERSATIONAL, STREAMING, INTERACTIVE, BACKGROUND, NBAMR, WBAMR CONVERSATIONAL, STREAMING, INTERACTIVE, BACKGROUND CONVERSATIONAL, STREAMING, INTERACTIVE, BACKGROUND, NBAMR, WBAMR
INTERACTIVE, BACKGROUND
None
WRFD050424
Enumeration Type
INTERACTIVE, BACKGROUND, IMSSIGNALLING None CONVERSATION AL, STREAMING, INTERACTIVE, BACKGROUND, NBAMR, WBAMR None CONVERSATION AL, STREAMING, INTERACTIVE, BACKGROUND None CONVERSATION AL, STREAMING, INTERACTIVE, BACKGROUND, NBAMR, WBAMR None
WRFD010686
Enumeration Type
WRFD010688
Enumeration Type
WRFD010687
Enumeration Type
WRFD01061010
HSDPA Flow Enumeration Control Steering Type Service and Load Sharing in RRC Connection Enumeration Setup Steering Type Service and Load Sharing in RRC Connection Enumeration Setup Type IP Transmission Introduction on Enumeration Iu Interface Type
INTERACTIVE, BACKGROUND
INTERACTIVE, BACKGROUND
None
WRFD020120
WRFD020120
AMR, VP, PSR99, M3UA_OVERRIDE_ AMR, VP, PSR99, PSHSPA None MOD(Active/Standby PSHSPA Mode), M3UA_LOADSHARE _MOD(Load Sharing Mode) M3UA_OVERRID E_MOD, M3UA_LOADSHA RE_MOD None
WRFD050409
WRFD020107
0~10
None
WRFD050301
0~65535
ms
WRFD05030104
Dynamic AAL2 Connections in Iub/IuCS/Iur Enumeration Interface Type IP Transmission Introduction on Enumeration Iub Interface Type
ATM(ATM), IP(IP), ATM_IP(ATM and IP), HYBRID_IP(HYBRID ATM, IP, ATM_IP, IP) HYBRID_IP None IP(IP), HYBRID_IP(HYBRID IP) IP, HYBRID_IP
WRFD050402
None
WRFD021305
RAN Sharing Enumeration ATM QoS Phase 2 Introduction on Type Hub NodeB (Overbooking on Hub Node B Enumeration ATM QoS Transmission) Type Introduction on Hub NodeB (Overbooking on Hub Node B Enumeration Transmission) Type
ATM(ATM), IP(IP), ATM_IP(ATM and IP), HYBRID_IP(HYBRID ATM, IP, ATM_IP, IP) HYBRID_IP None ATM(ATM), IP(IP), ATM_IP(ATM and IP), HYBRID_IP(HYBRID ATM, IP, ATM_IP, IP) HYBRID_IP None
WRFD050406
WRFD050406
ATM(ATM), IP(IP)
ATM, IP
None
WRFD010101
3GPP Specifications
0~255
None
WRFD010101
3GPP Specifications
1~32
None
WRFD010101
3GPP Specifications
1~32
None
3GPP HSDPA Specifications Introduction Package HSUPA Introduction Package Conversational QoS Class Outer LoopQoS Streaming Power Control Class Interactive QoS Class Background QoS Class HCS (Hierarchical Cell Structure)
Enumeration Type
1~32 TRCH_HSDSCH, None TRCH_EDCH_2M TRCH_HSDSCH, S, TRCH_EDCH_2MS, TRCH_EDCH_10 TRCH_EDCH_10MS MS None TRCH_DCH, TRCH_DCH, TRCH_EDCH_2MS, TRCH_EDCH_10MS TRCH_DCH, TRCH_HSDSCH, TRCH_EDCH_2MS, TRCH_EDCH_10MS TRCH_EDCH_2M S, TRCH_EDCH_10 TRCH_DCH, MS TRCH_HSDSCH, None TRCH_EDCH_2M S, TRCH_EDCH_10 MS None
Enumeration Type
Enumeration Type
WRFD021200
0~120
WRFD010801
0~31
WRFD010801
WRFD010801
{0~31}, {255}
None
WRFD020801
D0, D10, D20, D40, Interval Type 100~1999 D100, D60, D80, D120, D160, D200, Cell ID + RTT D240, D320, D640, Function Based Enumeration D1280, D2560, LCS Type D5000 None
100~199940, 60, None 0, 10, 20, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 ms
WRFD020202 WRFD020203
Intra RNC Softer Handover Inter RNC Soft Enumeration Handover Type Cell ID + RTT Function Based Enumeration LCS Type Intra RNC Softer Handover Inter RNC Soft Enumeration Handover Type Intra RNC Softer Handover Inter RNC Soft Enumeration Handover Type Intra RNC Softer Handover Inter RNC Soft Enumeration Handover Type Intra RNC Softer Handover Inter RNC Soft Enumeration Handover Type Intra RNC Softer Handover Inter RNC Soft Enumeration Handover Type HCS (Hierarchical Cell Structure) Inter-RAT Handover Based on Coverage Inter-RAT Handover Based on Coverage Inter-RAT Handover Inter-RAT Based on Handover Coverage Based on
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560,D40, D0, D10, D20, D5000 D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560,D40, D0, D10, D20, D5000 D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560,D40, D0, D10, D20, D5000 D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560,D40, D0, D10, D20, D5000 D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560,D40, D0, D10, D20, D5000 D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560,D40, D0, D10, D20, D5000 D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560,D40, D0, D10, D20, D5000 D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560,D40, D0, D10, D20, D5000 D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560,D40, D0, D10, D20, D5000 D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560,D40, D0, D10, D20, D5000 D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560,D40, D0, D10, D20, D5000 D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 20, 40, 60, ms 0, 10, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 20, 40, 60, ms 0, 10, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 20, 40, 60, ms 0, 10, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 20, 40, 60, ms 0, 10, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 20, 40, 60, ms 0, 10, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 20, 40, 60, ms 0, 10, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 20, 40, 60, ms 0, 10, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 20, 40, 60, ms 0, 10, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 20, 40, 60, ms 0, 10, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 20, 40, 60, ms 0, 10, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 20, 40, 60, ms 0, 10, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 ms
WRFD020801 WRFD020202 WRFD020203 WRFD020202 WRFD020203 WRFD020202 WRFD020203 WRFD020202 WRFD020203 WRFD020202 WRFD020203
WRFD021200
Enumeration Type
WRFD020303
Enumeration Type
WRFD020303
Enumeration Type
Enumeration Type
Intra RNC Softer Handover Inter RNC Soft Enumeration Handover Type Intra RNC Softer Handover Inter RNC Soft Enumeration Handover Type
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560,D40, D0, D10, D20, D5000 D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 20, 40, 60, ms 0, 10, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 ms 0~7(FG2a), 0~1(GOUa), 0~11(FG2c), 0~3(GOUc)
None
None
None
WRFD022000
Physical Channel ATM QoS Management Introduction on Interval Type 0~255 Hub NodeB (Overbooking on Hub Node B Transmission) Interval Type 0~199
WRFD050406
0~199
None
WRFD050404
ATM/IP Dual ATM QoS Stack Node B Interval Type 0~199 Introduction on Hub NodeB (Overbooking on Hub Node B Transmission) Interval Type 10~199 Fractional ATM Function on Iub Interface Interval Type 0~199 IMA for E1T1 or Channelized STM-1/OC-3 on Iub Interface Interval Type 0~199
0~199
None
WRFD050406
10~199
None
WRFD050302
0~199
None
WRFD050304
0~199
None
None
None
0~199
None
None
None
0~199
None
None
None
None
None
WRFD050421
WRFD050425
None
WRFD05030101
WRFD050302
Interval Type 0~199 TS1(Time_slot_1), TS2(Time_slot_2), TS3(Time_slot_3), None Interval Type TS4(Time_slot_4), 0~199 TS5(Time_slot_5), TS6(Time_slot_6), TS7(Time_slot_7), TS8(Time_slot_8), None Interval Type 0~199 TS9(Time_slot_9), TS10(Time_slot_10), Intra RNC Softer TS11(Time_slot_11), Handover TS12(Time_slot_12), Inter RNC Soft Handover Interval Type TS13(Time_slot_13), 0~4095 TS14(Time_slot_14), TS15(Time_slot_15), TS16(Time_slot_16), TS17(Time_slot_17), None Interval Type 0~11 TS18(Time_slot_18), TS19(Time_slot_19), TS20(Time_slot_20), IP Re-route TS21(Time_slot_21), Based on BFD/ARP Interval Type TS22(Time_slot_22), 0~11 TS23(Time_slot_23), TS24(Time_slot_24), TS25(Time_slot_25), TS26(Time_slot_26), Ethernet OAM Interval Type 0~11 TS27(Time_slot_27), TS28(Time_slot_28), TS29(Time_slot_29), Enumeration TS30(Time_slot_30), TS1, TS2, TS3, TS4, None Type TS31(Time_slot_31) TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, ATM over E1T1 Enumeration TS15, TS16, TS17, TS1, TS2, TS3, TS4, on Iub Interface Type OFF(OFF), ON(ON) TS18, TS19, TS20, TS5, TS6, TS7, TS8, TS21, TS22, TS23, TS9, TS10, TS11, Fractional ATM TS24, TS25, TS26, TS12, TS13, TS14, Function on Iub TS27, TS28, TS29, TS15, TS16, TS17, Interface Bit Field Type TS30, TS31 TS20, TS18, TS19, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, Bit Field Type TS30, TS31
0~199
None
0~199
None
0~199
None
0~4095
None
None
None
0~11 TS2, TS3, TS1, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, 0~11 TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, 0~11 TS2, TS3, TS1, TS22, TS23, TS4, TS5, TS6, TS24, TS25, TS7, TS8, TS9, TS26, TS27, TS10, TS11, TS28, TS29, TS12, TS13, TS30, TS31 TS1, TS2, TS3, TS14, TS15, TS4, TS5, TS6, TS16, TS17, TS7, TS8, TS9, TS18, TS19, TS10, TS11, TS20, TS21, TS12,ON OFF, TS13, TS22, TS23, TS14, TS15, TS24, TS25, TS16, TS17, TS26, TS27, TS18, TS19, TS28, TS29, TS20, TS21, TS30, TS31 TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31
None
None
None
None
None
None
None
None
None
TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, Bit Field Type TS30, TS31
TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31
None
None
None
0~65535
None
None
String Type
None
1~50 characters
None
WRFD021200
0~511
None
None
String Type
None
None
None
1~120
None
None
Enumeration Type
OFF, ON
OFF, ON
None
None
None
1~255
None
None
None
1~128
WRFD050402
IP Transmission Introduction on ATM QoS Iub Interfaceon Interval Type 1~3000000 Introduction Hub NodeB (Overbooking on Hub Node B Transmission) Interval Type 0~4000000
1~3000000
kbit/s
WRFD050406
0~4000000
kbit/s
None
None
512~149000
kbit/s
WRFD020203
Enumeration Type
TRUE, FALSE
TRUE, FALSE
None
WRFD022000
Enumeration Type
TRUE, FALSE
TRUE, FALSE
None
None
None
200~10000
ms
None
None ATM Transmission Introduction Package CBR, rt-VBR, nrt-VBR, UBR ATM QoS Classes
10~60
ms
WRFD050301
100~1999
None
WRFD05030107
100~1999
None
None
None
100~1999
None
None
None
Interval Type 100~1999 ANY_ERR_RETURN( Stop at Error), ALL_END_RETURN( Stop at End) NBAP_CCP, NBAP_NCP, IUB_OAM, ALCAP
100~1999
None
None
None
Enumeration Type
None
None
Enumeration Type
WRFD020203
0~16383
None
WRFD010101
3GPP Specifications
0~16383
None
WRFD020203
0~16383
None
WRFD010101
3GPP Specifications
0~16383
None
WRFD020203
Enumeration Type
TRUE, FALSE
TRUE, FALSE
None
WRFD010101
3GPP Specifications
WRFD020803
WRFD020803
TRUE, FALSE None REFERENCE_TI Dynamic AAL2 ME_FOR_GPS, Connections in REFERENCE_LO Iub/IuCS/Iur CATION_FOR_G Interface for IP Interval Type 2000~60000 2000~60000 ms PS, FP MUX REFERENCE_TI REFERENCE_TIME_ DGPS_CORRECT Transmission ME_FOR_GPS, FOR_GPS, , UDP MUX for REFERENCE_LO REFERENCE_LOCA NORTPCOMP, GPS_NAVGMOD Iu-CS Enumeration NORTPCOMP, CATION_FOR_G TION_FOR_GPS, EL, TransmissionIP Type RTPCOMP RTPCOMP None PS, FP MUX for DGPS_CORRECT, GPS_IONOSPHE REFERENCE_TIME_ DGPS_CORRECT Transmission GPS_NAVGMODEL, RIC_MODEL, FOR_GPS, , UDP MUX for GPS_IONOSPHERIC GPS_UTC_MODE Iu-CS Enumeration REFERENCE_LOCA GPS_NAVGMOD NORTPCOMP, NORTPCOMP, _MODEL, L, TION_FOR_GPS, EL, Transmission Type RTPCOMP None GPS_UTC_MODEL, RTPCOMP DGPS_CORRECT, GPS_ALMANAC, GPS_IONOSPHE GPS_ALMANAC, GPS_NAVGMODEL, GPS_ACQ_ASSI RIC_MODEL, GPS_ACQ_ASSIST, ST, GPS_IONOSPHERIC GPS_UTC_MODE A-GPS Based GPS_REALTIME_INT GPS_REALTIME_ _MODEL, L, LCS Bit Field Type EGRITY GPS_UTC_MODEL, INTEGRITY GPS_ALMANAC, None GPS_ALMANAC, GPS_ACQ_ASSI GPS_ACQ_ASSIST, ST, A-GPS Based GPS_REALTIME_INT GPS_REALTIME_ LCS Bit Field Type EGRITY INTEGRITY None
Enumeration Type
TRUE, FALSE
WRFD010101
3GPP Specifications
1~10000
ms
WRFD011402
Encryption
Administrators(Admini Interval Type 1~10000 strator), Operators(Operator), Users(User), Enumeration Guests(Guest), Type Customs(Custom)
1~10000
ms
None
None
300~1000
ms
String Type
None
0~9 Characters
None
WRFD020101
Admission Control
WRFD020701
D0, D10, D20, D40, Interval Type 0~100 D60, D80, D100, D120, D160, D200, AMR/WB-AMR D240, D320, D640, Speech Rates Enumeration D1280, D2560,D40, D0, D10, D20, Control Type D5000 D60, D80, D100, AMR/WB-AMR Speech Rates Enumeration Control Type AMR/WB-AMR Speech Rates Enumeration Control Type AMR/WB-AMR Speech Rates Enumeration Control Type AMR/WB-AMR Speech Rates Enumeration Control Type D120, D160, D200, D240, D320, D640, D1280, D2560,D40, D0, D10, D20, D5000 D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560,D40, D0, D10, D20, D5000 D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560,D40, D0, D10, D20, D5000 D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
0~1, step: 40, 60, None 0, 10, 20, 0.01 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 20, 40, 60, ms 0, 10, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 20, 40, 60, ms 0, 10, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 20, 40, 60, ms 0, 10, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 20, 40, 60, ms 0, 10, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 ms
WRFD020701
WRFD020701
WRFD020701
WRFD020701
WRFD020101
Admission Control UE State in Load Connected Measurement Mode (CELLDCH, CELLPCH, URAUE State in PCH, CELLConnected FACH) Mode (CELLDCH, CELLPCH, URAPCH, CELLFACH)
Interval Type 0~100 D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D11, D13, D15, D17, D19
None
WRFD020102
Enumeration Type
D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D11, D13, D15, D17, D19 None
WRFD010202
Enumeration Type
D8, D16
8, 16
kbit/s
WRFD010202
Enumeration Type
D8, D16
8, 16
kbit/s
WRFD021101
Dynamic Channel Configuration Enumeration Control (DCCC) Type Interactive and Background Traffic Class on Enumeration HSUPA Type Dynamic Channel Configuration Enumeration Control (DCCC) Type Dynamic Channel Configuration Enumeration Control (DCCC) Type Dynamic Channel Configuration Enumeration Control (DCCC) Type Dynamic Channel Configuration Enumeration Control (DCCC) Type Dynamic Channel Configuration Enumeration Control (DCCC) Type
D8, D16, D32, D64, D128, D144, D256, D384 D8, D16, D32, D64, D128, D144, D256, D384, D608, D1440, D2048, D2880,D40, D0, D10, D20, D5740 D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560,D40, D0, D10, D20, D5000 D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560,D40, D0, D10, D20, D5000 D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560,D40, D0, D10, D20, D5000 D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560,D40, D0, D10, D20, D5000 D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
8, 16, 32, 64, 128, 144, 256, 384 kbit/s 8, 16, 32, 64, 128, 144, 256, 384, 608, 1440, 2048, 2880, 20, 40, 60, kbit/s 0, 10, 5740 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 20, 40, 60, ms 0, 10, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 20, 40, 60, ms 0, 10, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 20, 40, 60, ms 0, 10, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 20, 40, 60, ms 0, 10, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 ms
WRFD01061206
WRFD021101
WRFD021101
WRFD021101
WRFD021101
WRFD021101
WRFD020102
Load Measurement
1~32
None
WRFD020101
Admission Control
0~1, step:0.01
per cent
Inter Frequency Hard Handover Admission Based on Control Interval Type Coverage Inter-RAT Handover Based on Coverage Bit Field Type
0~100
0~1, step:0.01
per cent
WRFD020106
Load Reshuffling
1~10
None
WRFD020106
Load Reshuffling
1~10
None
WRFD020106
Load Reshuffling
1~10
None
Load Reshuffling
Interval Type 1~10 D8, D16, D32, D64, D128, D144, D256, D384
1~10
None
Dynamic Conversational Channel QoS Class Configuration Streaming QoS Enumeration Control (DCCC) Type Class Interactive QoS Class Background Enumeration QoS Class Type Dynamic Channel Configuration Enumeration Control (DCCC) Type Traffic Priority Mapping on Transport
NORMAL, SILENT D8, D16, D32, D64, D128, D144, D256, D384
WRFD021101
WRFD050424
Enumeration Type
D0, D8, D16, D32, SF4(SF4), SF8(SF8), 0, 8, 16, 32, 64, D64, D128, D144, 128, 144, 256, SF16(SF16), D256, D384 384 SF32(SF32), SF64(SF64), SF128(SF128), SF256(SF256), SFOFF(SFOFF) SF4, SF8, SF16, SF32, SF64, SF128, SF256, SFOFF
kbit/s
WRFD020101
Admission Control
Enumeration Type
None
WRFD020101
Admission Control
0~1, step:0.01
per cent
WRFD010618
Enumeration Type
None
WRFD020101
Admission Control
None
WRFD020106
Load Reshuffling
0~400000
bit/s
WRFD020106
Load Reshuffling
0~1, step:0.01
per cent
WRFD020106
Load Reshuffling
1~10
None
WRFD020102
Load Measurement
WRFD020106
Load Reshuffling
WRFD020106
Load Reshuffling
WRFD020106
Load Reshuffling
WRFD020106
Load Reshuffling
WRFD020106
Load Reshuffling
WRFD020106
Load Reshuffling
WRFD020106
Load Reshuffling
WRFD020106
Load Reshuffling
WRFD020106
Load Reshuffling
NoAct(no action), InterFreqLDHO(interfreq load handover), Interval Type 1~32 BERateRed(BE traff 1~32 rate reduction), NoAct(no action), QoSRenego(uncontro InterFreqLDHO(interlled real-time traff Qos freq load handover), re-negotiation), traff 1~10 Interval Type 1~10 BERateRed(BE CSInterRatShouldBeL rate reduction), DHO(CS domain QoSRenego(uncontro inter-rat should beQos lled real-time traff load handover), SF4(SF4), SF8(SF8), Interval Type re-negotiation), 1~10 PSInterRatShouldBeL 1~10 SF16(SF16), CSInterRatShouldBeL NoAct(no action), DHO(PS domain NoAct, SF32(SF32), NoAct(no domain DHO(CS action), BERateRed(BE traff InterFreqLDHO, inter-rat should be SF64(SF64), InterFreqLDHO(inter- SF4, SF8, SF16, inter-rat should be rate load handover), SF32, SF64, load reduction), BERateRed, Enumeration SF128(SF128), freq handover), load handover), SF4(SF4), SF8(SF8), QoSRenego, QoSRenego(uncontro SF128, SF256 AMRRateRed(AMR Type SF256(SF256) traff BERateRed(BE PSInterRatShouldBeL SF16(SF16), traff Qos CSInterRatShould lled real-time traff rate reduction), NoAct, rate reduction), DHO(PS domain SF32(SF32), re-negotiation), CSInterRatShouldNot BeLDHO, QoSRenego(uncontro SF4, SF8, SF16, inter-rat should SF64(SF64), be CSInterRatShouldBeL InterFreqLDHO, LDHO(CS domain PSInterRatShould lled handover), Enumeration loadreal-time traff Qos BERateRed, SF128(SF128), not be SF32, SF64, DHO(CS domain inter-rat should re-negotiation), AMRRateRed(AMR BeLDHO, QoSRenego, Type SF256(SF256) be inter-rat should load rate reduction), SF128, SF256 CSInterRatShouldBeL AMRRateRed, traff handover), CSInterRatShould NoAct(no action), load handover), PSInterRatShouldNot CSInterRatShould DHO(CS domain CSInterRatShouldNot BeLDHO, BERateRed(BE traff PSInterRatShouldBeL NotLDHO, LDHO(PS domain inter-rat should be LDHO(CS domain PSInterRatShould DHO(PS domain Enumeration rate reduction), not be PSInterRatShould inter-rat should not be NoAct, load handover), inter-rat should be QoSRenego(uncontro BeLDHO, inter-rat should Type load handover) PSInterRatShouldBeL BERateRed, loadreal-time traff Qos NotLDHO AMRRateRed, lled handover), load handover), QoSRenego, DHO(PS domain NoAct, PSInterRatShouldNot CSInterRatShould re-negotiation), CSInterRatShouldNot CSInterRatShould inter-rat should be LDHO(PS domain NotLDHO, CSInterRatShouldBeL InterFreqLDHO, LDHO(CS domain BeLDHO, Enumeration load handover),not be BERateRed, inter-rat should not be PSInterRatShould DHO(CS domain inter-rat should AMRRateRed(AMR PSInterRatShould QoSRenego, Type load handover) be inter-rat should load rate reduction), NotLDHO BeLDHO, traff handover), CSInterRatShould load handover), PSInterRatShouldNot SInterRatShouldN CSInterRatShouldNot BeLDHO, PSInterRatShouldBeL otLDHO, LDHO(PS domain LDHO(CS domain PSInterRatShould DHO(PS domain NoAct, Enumeration inter-rat should not be PSInterRatShould inter-rat should not be BeLDHO, inter-rat should be BERateRed, Type load handover) NotLDHO load handover), AMRRateRed, load handover), QoSRenego, PSInterRatShouldNot CSInterRatShould CSInterRatShouldNot CSInterRatShould LDHO(PS domain NotLDHO, LDHO(CS domain BeLDHO, Enumeration inter-rat should not be PSInterRatShould inter-rat should not be PSInterRatShould Type load handover) NotLDHO load handover), BeLDHO, PSInterRatShouldNot SInterRatShouldN LDHO(PS domain otLDHO, Enumeration inter-rat should not be PSInterRatShould Type load handover) NotLDHO
None
None
None
None
None
None
None
None
None
None
WRFD020106
Load Reshuffling
WRFD020106
Load Reshuffling
WRFD020106
Load Reshuffling
WRFD020106
Load Reshuffling
WRFD020106
Load Reshuffling
WRFD020106
Load Reshuffling
WRFD020106
Load Reshuffling
WRFD020106
Load Reshuffling
WRFD020106
Load Reshuffling
WRFD020106
Load Reshuffling
WRFD020106
Load Reshuffling
WRFD020106
Load Reshuffling
load handover), BERateRed, DHO(CS domain AMRRateRed(AMR QoSRenego, inter-rat should be traff rate reduction), CSInterRatShould load handover), CSInterRatShouldNot BeLDHO, PSInterRatShouldBeL LDHO(CS domain PSInterRatShould DHO(PS domain NoAct, inter-rat should not be BeLDHO, inter-rat should be BERateRed, load handover), AMRRateRed, load handover), QoSRenego, PSInterRatShouldNot CSInterRatShould NoAct(no action), CSInterRatShouldNot CSInterRatShould LDHO(PS domain InterFreqLDHO(inter- NotLDHO, LDHO(CS domain BeLDHO, Enumeration inter-rat should not be PSInterRatShould freq load handover), inter-rat should not be PSInterRatShould Type load handover) traff NotLDHO BERateRed(BE load handover), BeLDHO, rate reduction), PSInterRatShouldNot SInterRatShouldN QoSRenego(uncontro otLDHO, LDHO(PS domain Enumeration lled real-time traff Qos PSInterRatShould inter-rat should not be re-negotiation), Type load handover) NotLDHO CSInterRatShouldBeL NoAct(no action), NoAct(no action), DHO(CS domain BERateRed(BE traff InterFreqLDHO(interinter-rat should be rate reduction), freq handover), load load handover), Interval Type QoSRenego(uncontro 1~10 1~10 BERateRed(BE traff PSInterRatShouldBeL lled real-time traff Qos rate reduction), DHO(PS action), NoAct, NoAct(nodomain re-negotiation), QoSRenego(uncontro InterFreqLDHO, inter-rat should be InterFreqLDHO(interCSInterRatShouldBeL lled load handover), loadreal-time traff Qos BERateRed, freq handover), DHO(CS domain re-negotiation), traff QoSRenego, AMRRateRed(AMR 1~10 Interval Type 1~10 should be BERateRed(BE inter-rat CSInterRatShouldBeL CSInterRatShould traff rate reduction), rate handover), load reduction), DHO(CS domain CSInterRatShouldNot BeLDHO, QoSRenego(uncontro PSInterRatShouldBeL inter-rat should be LDHO(CS domainQos PSInterRatShould lled real-time traff DHO(PS domain NoAct, load handover), inter-rat should not be BeLDHO, re-negotiation), Interval Type inter-rat should be 0~100 0~1, step:0.01 PSInterRatShouldBeL BERateRed, load handover), CSInterRatShouldBeL AMRRateRed, load handover), QoSRenego, NoAct(no action), DHO(PS domain PSInterRatShouldNot NoAct, NoAct(no domain DHO(CS action), CSInterRatShouldNot CSInterRatShould BERateRed(BE traff CSInterRatShould inter-rat should be LDHO(PS domain NotLDHO, InterFreqLDHO(inter- InterFreqLDHO, inter-rat should be LDHO(CS domain rate load handover), BeLDHO, load reduction), Enumeration inter-rat should not be PSInterRatShould freq handover), load handover),not be BERateRed, inter-rat should QoSRenego(uncontro PSInterRatShould AMRRateRed(AMR QoSRenego, Type load handover) traff NotLDHO BERateRed(BE PSInterRatShouldBeL loadreal-time traff Qos BeLDHO, lled rate reduction), CSInterRatShould traff handover), rate reduction), DHO(PS domain NoAct, PSInterRatShouldNot SInterRatShouldN re-negotiation), CSInterRatShouldNot BeLDHO, QoSRenego(uncontro otLDHO, inter-rat should be LDHO(PS domain CSInterRatShouldBeL InterFreqLDHO, LDHO(CS domain lled handover),not be PSInterRatShould Enumeration loadreal-time traff Qos BERateRed, inter-rat should not be PSInterRatShould DHO(CS domain inter-rat should re-negotiation), AMRRateRed(AMR BeLDHO, QoSRenego, Type load handover) inter-rat should be load rate reduction), NotLDHO CSInterRatShouldBeL AMRRateRed, traff handover), CSInterRatShould NoAct(no action), load handover), PSInterRatShouldNot CSInterRatShould DHO(CS domain CSInterRatShouldNot BeLDHO, BERateRed(BE traff PSInterRatShouldBeL NotLDHO, LDHO(PS domain inter-rat should be LDHO(CS domain PSInterRatShould DHO(PS domain Enumeration rate reduction), not be PSInterRatShould inter-rat should not be NoAct, load handover), inter-rat should be QoSRenego(uncontro BeLDHO, inter-rat should Type load handover) PSInterRatShouldBeL BERateRed, loadreal-time traff Qos NotLDHO AMRRateRed, lled handover), load handover), QoSRenego, DHO(PS domain NoAct, PSInterRatShouldNot CSInterRatShould re-negotiation), CSInterRatShouldNot CSInterRatShould inter-rat should be LDHO(PS domain NotLDHO, CSInterRatShouldBeL InterFreqLDHO, LDHO(CS domain BeLDHO, Enumeration load handover),not be BERateRed, inter-rat should not be PSInterRatShould DHO(CS domain inter-rat should AMRRateRed(AMR PSInterRatShould QoSRenego, Type load handover) be inter-rat should load rate reduction), NotLDHO BeLDHO, traff handover), CSInterRatShould load handover), PSInterRatShouldNot SInterRatShouldN CSInterRatShouldNot BeLDHO, PSInterRatShouldBeL otLDHO, LDHO(PS domain LDHO(CS domain PSInterRatShould DHO(PS domain NoAct, Enumeration inter-rat should not be PSInterRatShould inter-rat should not be BeLDHO, inter-rat should be BERateRed, Type load handover) NotLDHO load handover), AMRRateRed, load handover), QoSRenego, PSInterRatShouldNot CSInterRatShould CSInterRatShouldNot CSInterRatShould LDHO(PS domain NotLDHO, LDHO(CS domain BeLDHO, Enumeration inter-rat should not be PSInterRatShould inter-rat should not be PSInterRatShould Type load handover) NotLDHO load handover), BeLDHO, PSInterRatShouldNot SInterRatShouldN LDHO(PS domain otLDHO, Enumeration inter-rat should not be PSInterRatShould Type load handover) NotLDHO
None
None
None
None
per cent
None
None
None
None
None
None
None
WRFD020106
Load Reshuffling 3.4/6.8/13.6/27. Interval Type 0~100 2 kbit/s RRC Connection and RAB Enumeration Assignment Type Dynamic Channel Configuration Enumeration Control (DCCC) Type Dynamic Channel Configuration Enumeration Control (DCCC) Type Dynamic Channel Configuration Enumeration Control (DCCC) Type
0~1, step:0.01
per cent
WRFD010510
D16, D32, D48, D64, 16, 32, 48, 64, 96, D96, D128, D256, 128, 256, 512, D512, D1024 1024 None D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, 0, 1, 2, 3, 4, 5, 6, D11, D13, D15, D17, 7, 8, 9, 11, 13, 15, D19 17, 19 None
WRFD021101
WRFD021101
AUTO_CALC, HAND_APPOINT
0, 1
None
WRFD021101
D16, D32, D64, D128, 16, 32, 64, 128, D144, D256, D384 144, 256, 384
kbit/s
WRFD020701
AMR/WB-AMR Speech Rates Control Interval Type 1~64000 AMR/WB-AMR Speech Rates Control Interval Type 1~64000
1~64000
ms
WRFD020701
1~64000
ms
WRFD020101
Admission Control
None
WRFD020101
Admission Control
0~1, step:0.01
per cent
WRFD020101
Admission Control
0~1, step:0.01
per cent
WRFD020101
Admission Control
0~1, step:0.01
per cent
WRFD020101
Admission Control
0~1, step:0.01
per cent
WRFD020102
Load Measurement
1~32
None
WRFD020107
Overload Control
1~10
None
WRFD020107
Overload Control
Interval Type 0~100 D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D11, D13, D15, D17, D19
0~100
None
WRFD020102
Load Measurement
Enumeration Type
D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D11, D13, D15, D17, D19 None
WRFD020107
Overload Control
0~1, step:0.01
per cent
WRFD020107
Overload Control
0~10
None
WRFD020102
Load Measurement
WRFD020107
Overload Control
0~1, step:0.01
per cent
WRFD020106
Load Reshuffling
1~10
None
WRFD020106
Load Reshuffling
1~10
None
WRFD020106
Load Reshuffling
1~10
None
WRFD020106
Load Reshuffling
1~10
None
AMR/WB-AMR Speech Rates Control Inter-RAT Handover AMR/WB-AMR Based on DL Speech Rates Enumeration QoS Type Control Inter-RAT Handover AMR/WB-AMR Based on DL Speech Rates Enumeration QoS Type Control Inter-RAT Inter Frequency Handover Hard Handover Based on DL Enumeration Based on DL QoS Type QoS Inter-RAT Handover Based on DL QoS
NO, YES
NO, YES
None
NO, YES
NO, YES
None
NO, YES
NO, YES
None
0~512
Inter Frequency Hard Handover AMR/WB-AMR Based on DL Speech Rates Enumeration QoS Type Control Inter-RAT Handover AMR/WB-AMR Based on DL Speech Rates Enumeration QoS Type Control Inter-RAT Handover AMR/WB-AMR Based on DL Speech Rates Enumeration QoS Type Control Inter-RAT Handover Based on DL QoS Enumeration Type
NO, YES
NO, YES
None
NO, YES
NO, YES
None
NO, YES
NO, YES
None
NO, YES
NO, YES
None
WRFD021101
Dynamic Channel Configuration Enumeration Control (DCCC) Type Dynamic Inter-RAT Channel Handover Configuration Enumeration Based on Control (DCCC) Type Coverage Inter Frequency Hard Handover Based on Enumeration Coverage Type
2_Rates, 3_Rates
2_Rates, 3_Rates
WRFD020101
Admission Control
None
WRFD010636
Enumeration Type
None
WRFD020101
Admission Control Streaming AMR/WB-AMR Traffic Class on Speech HSUPA Rates Control Dynamic Streaming Channel AMR/WB-AMR Traffic Class on Configuration Speech Rates HSUPA (DCCC) Control Control Inter-RAT Dynamic Handover Channel AMR/WB-AMR Based on DL Configuration Speech Rates QoS (DCCC) Control Control Inter-RAT Dynamic Handover Channel AMR/WB-AMR Based on DL Configuration Speech Rates QoS (DCCC) Control Control Inter-RAT Dynamic Handover Channel Based on DL Configuration QoS (DCCC) Control Inter-RAT Handover Based on DL QoS
Interval Type 0~100 D8, D16, D32, D64, D128, D144, D256, D384
None
WRFD010632
Enumeration Type
WRFDWRFD010632 020701 WRFD021101 WRFDWRFD020309 020701 WRFD021101 WRFDWRFD020309 020701 WRFD021101 WRFDWRFD020309 020701 WRFD021101 WRFD020309
Enumeration Type
None
0~82
dB
0~82
dB
0~82
dB
0~82
dB
WRFD020101
Admission Control
1~200
None
WRFD020504
WRFD020304
D0, D10, D20, D40, Interval Type 1~2 D80, D100, D60, Inter Frequency D120, D160, D200, Hard Handover D240, D320, D640, Based on DL Enumeration D1280, D2560,D40, D0, D10, D20, QoS Type D5000 D60, D80, D100, Inter Frequency Hard Handover Based on DL Enumeration QoS Type D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
1~2 20, 40, 60, dB 0, 10, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 20, 40, 60, ms 0, 10, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 ms
WRFD020304
WRFD020304
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 ms
WRFD05030101
NO(NO), YES(YES)
NO, YES
None
WRFD020801
Cell ID + RTT Function Based LCS Interval Type 0~990 Cell ID + RTT Function Based LCS Interval Type 0~3248 Cell ID + RTT Function Based LCS Interval Type 0~1800000 Cell ID + RTT Function Based LCS Interval Type 0~5905440 Cell ID + RTT Function Based LCS Interval Type 0~1800000 Cell ID + RTT Function Based LCS Interval Type 0~5905440
0~990
WRFD020801
0~3248
WRFD020801
0~1800000
WRFD020801
0~5905440
WRFD020801
0~1800000
WRFD020801
None
None
0~31(AEUa), 0~125(E1 of 0~5905440 AOUa), 0~167(T1 m of AOUa), 0~251(E1 of AOUc), 0~335(T1 of AOUc) None
WRFD010660
MBMS Phase 2 Interval Type 2~20 Dynamic AAL2 Connections in Iub/IuCS/Iur ATM QoS Interface Introduction on Interval Type 0~4599 Hub NodeB (Overbooking on Hub Node B Transmission) Interval Type 0~2047
2~20
None
WRFD05030104
0~4599
None
WRFD050406
0~2047
None
None
None
None
None
WRFD010101
3GPP Specifications
0~65535
None
WRFD010101
3GPP Specifications
0~65535
None
WRFD010101
3GPP Specifications
0~65535
None
WRFD010101
3GPP Specifications
0~65535
None
WRFD010101
3GPP Specifications
0~65535
None
WRFD010101
3GPP Specifications
0~65535
None
WRFD010101
3GPP Specifications
0~65535
None
WRFD010101
3GPP Specifications
0~65535
None
WRFD010101
3GPP Specifications
0~65535
None
WRFD010101
3GPP Specifications
0~65535
None
WRFD010101
3GPP Specifications
Enumeration Type
None
WRFD020302
Inter Frequency Hard Handover Based on Coverage Interval Type -24~0 Inter-RAT Handover Based on Coverage
-24~0
dB
WRFD020303
-24~0
dB
WRFD020302
Inter Frequency Hard Handover Based on Coverage Interval Type -115~-25 Inter-RAT Handover Based on Coverage
-115~-25
dBm
WRFD020303
-115~-25
dBm
WRFD020302
Inter Frequency Hard Handover Based on Coverage Interval Type -24~0 Inter-RAT Handover Based on Coverage
-24~0
dB
WRFD020303
-24~0
dB
WRFD020302
Inter Frequency Hard Handover Based on Coverage Interval Type -115~-25 Inter-RAT Inter Frequency Handover Hard Handover Based on DL Based on Coverage Interval Type -115~-25 QoS Inter-RAT Handover Based on DL QoS Enumeration Type CPICH_EC/NO, CPICH_RSCP
-115~-25
dBm
-115~-25
dBm
CPICH_EC/NO, CPICH_RSCP
None
WRFD020302
Inter Frequency Hard Handover Based on Coverage Interval Type -24~0 Inter-RAT Handover Based on Coverage
-24~0
dB
WRFD020303
-24~0
dB
WRFD020302
Inter Frequency Hard Handover Based on Coverage Interval Type -115~-25 Inter-RAT Handover Based on Coverage CPC - HSSCCH less operation
-115~-25
dBm
WRFD020303
-115~-25
dBm
WRFD010687
Enumeration Type
NOTUSED, USED
WRFD031101
DHCP
Enumeration Type
Disable, Enable
None
WRFD010802
Inter RNC Cell Update HCS (Hierarchical Cell Structure) Inter-RAT Handover Based on Coverage
Enumeration Type
USED, NOT_USED
None
WRFD021200
Enumeration Type
WRFD020303
Enumeration Type
None
None
WRFD040100
Flow Control
5~20
per cent
WRFD040100
Flow Control
50~100
per cent
WRFD010688
Enumeration Type
None
WRFD050424
Enumeration Type
None
WRFD01061010
Enumeration Type
None
WRFD050424
Enumeration Type
None
String Type
None
1~32 characters
None
None
Enumeration Type
CELL/S, KBIT/S
CELL/S, KBIT/S
None
WRFD050301
32~65535
None
WRFD050402
DISABLE(Disable), ENABLE(Enable)
DISABLE, ENABLE
None
None
None
Enumeration Type
DISABLE, ENABLE
DISABLE, ENABLE
None
None
None
Enumeration Type
None
None
None
Enumeration Type
None
None
None
2~4094
None
WRFD050425
Ethernet OAM
2~4094
None
None
None
2~4094
None
None
None
2~4094
None
None
WRFD050406
WRFD050406
WRFD050404
WRFD050406
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, ATM QoS AF21, None Interval Type 0~7 AF22, AF23, Introduction on AF31, AF32, AF33, Hub NodeB AF41, AF42, AF43, (Overbooking EF, LQBE, LQAF11, on Hub Node B ATM QoS LQAF12, LQAF13, Transmission) Interval Type 0~100RT_VBR, CBR, Introduction on LQAF21, LQAF22, NRT_VBR, UBR, BE, Hub NodeB LQAF23, LQAF31, AF11, AF12, AF13, (Overbooking LQAF32, LQAF33, AF21, AF22, AF23, on Hub Node B Enumeration LQAF41, LQAF42, AF31, AF32, AF33, Transmission) Type LQAF43, LQEF AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, ATM/IP Dual ATM QoS LQAF21, LQAF22, Stack Node B Interval Type 0~100 LQAF31, Introduction on LQAF23, Hub NodeB LQAF32, LQAF33, (Overbooking LQAF41, LQAF42, on Hub Node B Enumeration LQAF43, LQEF, Transmission) Type NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, 0~7 AF32, None AF33, AF41, AF42, AF43, EF, CBR, RT_VBR, LQBE, LQAF11, NRT_VBR, UBR, LQAF12, LQAF13, 0~100 LQAF22, per cent BE, AF11, AF12, LQAF21, AF13, AF21, LQAF23, LQAF31, AF22, AF23, LQAF32, LQAF33, AF31, AF32, LQAF41, LQAF42, AF33, AF41, LQAF43, LQEF None AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, 0~100 LQAF31, None LQAF23, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL None
WRFD050404
ATM/IP Dual ATM QoS Stack Node B Interval Type 0~100 Introduction on
0~100
None
WRFD050406
WRFD010617
Hub NodeB (Overbooking on Hub Node B DCH(UL_DCH,DL_D Transmission) Interval Type 0~100 0~100 CH), HSDPA(UL_DCH,DL _HSDSCH), VoIP over Enumeration HSPA(UL_EDCH,DL_ DCH, HSDPA, HSPA/HSPA+ Type HSDSCH) HSPA
per cent
None
WRFD010617
Enumeration Type
EDCH_TTI_10ms, EDCH_TTI_2ms
Enumeration Type
CLOSE(Close), OPEN(Open)
CLOSE, OPEN
None
String Type
None
1~9 characters
String Type
None
1~9 characters
Enumeration Type
CLOSE(Close), OPEN(Open)
CLOSE, OPEN
None
String Type
None
1~9 characters
String Type
None
1~9 characters
None
0~1399
None
WRFD050301
0~4095
None
WRFD020203
Inter RNC Soft Video Handover Telephony Fallback to Speech (AMR) for Inter-RAT HO
Enumeration Type
TRUE, FALSE
TRUE, FALSE
None
WRFD020307
Enumeration Type
TRUE, FALSE
TRUE, FALSE
None
WRFD020304
NO, YES
NO, YES
None
WRFD010510
2 kbit/s RRC Connection and RAB Assignment 3.4/6.8/13.6/27. Interval Type 0~100 2 kbit/s RRC Connection and RAB Assignment 3.4/6.8/13.6/27. Interval Type 0~65534 2 kbit/s RRC Connection and RAB Assignment 3.4/6.8/13.6/27. Interval Type 0~100 2 kbit/s RRC Connection and RAB Assignment Interval Type 0~65534
0~100
per cent
WRFD010510
0~65534
None
WRFD010510
0~100
per cent
WRFD010510
0~65534
None
WRFD020701 WRFD020309
AMR/WB-AMR Speech Rates Control Inter-RAT Handover Based on DL QoS Interval Type 20~64000
20~64000
ms
Enumeration Type
CLOSE(Close), OPEN(Open)
CLOSE, OPEN
None
Enumeration Type
NOLIMIT, LIMIT
None
Intra RNC Softer Handover Inter RNC Soft Handover Interval Type 0~20 Inter Frequency Hard Handover Based on Coverage Interval Type 0~20 Inter-RAT Handover Based on Coverage IP Re-route Based on BFD/ARP ATM Transmission Introduction Package
0~2, step:0.1
None
WRFD020302
0~2, step:0.1
None
WRFD020303
0~2, step:0.1
None
WRFD050421
Enumeration Type
NO(NO), YES(YES)
NO, YES
None
WRFD050301
SUN(Sunday), MON(Monday), Interval Type 1~32767 TUE(Tuesday), WED(Wednesday), THU(Thursday), Enumeration FRI(Friday), Type SAT(Saturday)
1~32767
None
WRFD050409
M3UA_ASP(M3UA_A SP), M3UA_IPSP(M3UA_I M3UA_ASP, PSP) M3UA_IPSP Active(Format active area), Standby(Format standby area) Active, Standby E1_UNBA(E1 Unbalance), E1_BA(E1 Balance), E1_UNBA, T1(T1), E1(E1) E1_BA, T1, E1
None
Enumeration Type
None
WRFD05030101
None
None
None
Enumeration Type
None
None
Interval Type
WRFD010660
WRFD040100
Flow Control
Interval Type
WRFD040100
Flow Control
Interval Type
WRFD021101
Enumeration Type
GMT+0430(GMT+04: 30), GMT+0500(GMT+05: 00), GMT+0530(GMT+05: 30), GMT+0545(GMT+05: 45), GMT+0600(GMT+06: 00), GMT+0630(GMT+06: UNI, NNI 30), GMT+0700(GMT+07: 00), GMT+0800(GMT+08: 30~60000 00), GMT+0845(GMT+08: 45), GMT+0900(GMT+09: 00), 1~5 GMT+0930(GMT+09: 30), GMT+1000(GMT+10: 00), 1~100 GMT+1030(GMT+10: 30), GMT+1100(GMT+11: 00), GMT+1130(GMT+11: 1~100 30), GMT+1200(GMT+12: 00), GMT+1245(GMT+12: 0~65535 45), GMT+1300(GMT+13: 00), GMT+1400(GMT+14: 00)
GMT+0430(GMT+ 04:30), GMT+0500(GMT+ 05:00), GMT+0530(GMT+ 05:30), GMT+0545(GMT+ 05:45), GMT+0600(GMT+ 06:00), GMT+0630(GMT+ UNI, NNI 06:30), GMT+0700(GMT+ 07:00), GMT+0800(GMT+ 30~60000 08:00), GMT+0845(GMT+ 08:45), GMT+0900(GMT+ 09:00), 1~5 GMT+0930(GMT+ 09:30), GMT+1000(GMT+ 10:00), 1~100 GMT+1030(GMT+ 10:30), GMT+1100(GMT+ 11:00), GMT+1130(GMT+ 1~100 11:30), GMT+1200(GMT+ 12:00), GMT+1245(GMT+ 0~65535 12:45), GMT+1300(GMT+ 13:00), GMT+1400(GMT+ 14:00)
None
None
per cent
per cent
None
Default Value Recommended Value Impact Parameter Relationship ccessInterrupted After Modification Service A Interruption Scope N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
1 RNC
None
None
None
AAL2 path
None
None
None
RNC
N (No impact on the UE in None Read & Write idle mode) Not involved The ASCs are configured through "ADD N (Impact on UPRACHASC the UE in idle ". ASCs are Read & Write mode) Not involved The configured through "ADD N (Impact on UPRACHASC the UE in idle ". ASCs are Read & Write mode) Not involved The configured through "ADD N (Impact on UPRACHASC the UE in idle ". ASCs are Read & Write mode) Not involved The configured through "ADD N (Impact on UPRACHASC the UE in idle ". ASCs are Read & Write mode) Not involved The configured through "ADD N (Impact on UPRACHASC the UE in idle ". ASCs are Read & Write mode) Not involved The configured through "ADD N (Impact on UPRACHASC the UE in idle ". ASCs are Read & Write mode) Not involved The configured through "ADD N (Impact on UPRACHASC the UE in idle ". Read & Write mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
ASC0
ASC0
Cell
ASC0
ASC0
Cell
ASC0
ASC0
Cell
ASC0
ASC0
Cell
ASC0
ASC0
Cell
ASC0
ASC0
Cell
ASC0
ASC0
Cell
None
None
Cell
None
80
80 Board
None
80
75 Board
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (Impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (Impact on the UE in idle mode) Not involved
Enable
Enable
PPP link
None
50 RNC
None
None
None
None
None
Cell
None When When "RestrictionTy "DsacAutoSwi pe" inwhen Only "ADD tch"is set to UCELLDSAC Read & Write "RestrictionTy None ON,the MANUALPAR pe" in "ADD parameter A" is UCELLDSAC need RestrictionFix MANUALPAR configuring;el ed,is A" se,need not. Read & Write AcRestriction RestrictionFix should ed, thisbe When configured. parameter "DsacAutoSwi When should beto tch"is set "RestrictionTy Read & Write configured. ON,the pe" in "ADD parameter UCELLDSAC need MANUALPAR Only when configuring;el A" is "RestrictionTy se,need not. Read & Write RestrictionFle pe" in "ADD xible, UCELLDSAC AcRestriction MANUALPAR should not be A" is configured. RestrictionFix Read & Write ed, this parameter should be configured.
None
None
Cell
N (Impact on the UE in idle Read & Write mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
30 RNC
None
10 RNC
When "DsacAutoSwi tch"is set to None Read & Write ON,the parameter need configuring;el se,need not. Read & Write
None
2 RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
OFF
RNC
None
70
70 Board
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
70
65 Board
None
ON
ON
Board
None
None
RNC
ACTIVE
ACTIVE
Cell
None This parameter is valid when the None "CellLocCfgTy Read & Write pe" is set to BOTH or CELL_ANTE NNA. Read & Write
None
NODELIVERY RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
UE_BASED
RNC
None
None
None
None
None
Not involved
None
None
None
None
N (No impact on the UE in Read & Write idle mode) Not involved N (Impact on the UE in idle Read & Write mode) Not involved
-6
-6 Cell
None
1 Cell
None
Not involved
None
None
None
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
None
None
None
None
None
None
None
None
None
None
None
None
None
HALF_DUPL EX, this parameter is valid;if the "BWMODE" in "ADD RSCGRP" of upper class and lower class RSCGRP is Read & Write None None set to HALF_DUPL EX, the "AllBw" in BSC6900 None Read & Write "ADD RSCGRP" of upper class RSCGRP can not less than Read & Write BSC6900 None the "AllBwE" in "ADD RSCGRP" of lower class BSC6900 None RSCGRP;The Read & Write "AllBw" in "ADD RSCGRP" of upper class Read & Write BSC6900 None RSCGRP can not less than the sum of "TxBw" and RNC None in Read & Write "RxBw" "ADD Transmission RSCGRP" of resource lower class group RSCGRP. Read & Write
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
Automatic
Automatic
Cell
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
all
all
BSC6900
None
None
None
BSC6900
None
Not involved
None
None
BSC6900
None
Not involved
None
None
BSC6900
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
None
BSC6900
4 Cell
This parameter is valid when None "InterFreqRep Read & Write ortMode" is set to EVENT_TRIG GER. Read & Write This parameter is valid when None "InterRatRepo Read & Write rtMode" is set to EVENT_TRIG GER. Read & Write
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
1 Cell
4 Cell
1 Cell
None
None
RAB
This None parameter is required when the "RlcMode" N (No impact parameter is on the UE in set to AM. Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
N (No impact on the UE in Read & Write idle mode) Not involved
None
NO
RNC
None
None
40 RNC
None
None
100 RNC
None
None
60 RNC
None
None
200 RNC
None
None
3000 RNC
Valid when "AMRQosPerf N (No impact orm" is set to on the UE in YES. Read & Write idle mode) Not involved
None
None
Not involved
None
None
AAL2 path
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
None
IP path
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
Adjacent node None This parameter is valid when the BSC6900 None "CellLocCfgTy Read & Write This pe" is set to parameter is BOTH or valid when CELL_ANTE the Cell NNA. "CellLocCfgTy Read & Write This pe" is set to parameter is BOTH or valid when CELL_ANTE the Cell NNA. "CellLocCfgTy Read & Write This pe" is set to parameter is BOTH or valid when CELL_ANTE the Cell NNA. "CellLocCfgTy Read & Write This pe" is set to parameter is BOTH or valid when CELL_ANTE the Cell NNA. "CellLocCfgTy Read & Write This pe" is set to parameter is BOTH or valid when CELL_ANTE the Cell NNA. "CellLocCfgTy Read & Write This pe" is set to parameter is BOTH or valid when CELL_ANTE the Cell NNA. "CellLocCfgTy Read & Write pe" is set to BOTH or CELL_ANTE Cell NNA. Read & Write
None
None
Cell
This parameter is valid when the "CellLocCfgTy pe" is set to BOTH or N (No impact CELL_ANTE on the UE in NNA. Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
OFF
OFF
Board
None
FALSE
FALSE Cell
None
None
None
SCTP link
None
Not involved
None
None
RAB
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
PRIMARY
None
None
None
PRIMARY
PRIMARY
None
None
None
None
RNC
None
None
None
RNC
None
None
None
RNC
None
None
None
RNC
None
None
None
RNC
None
None
None
RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
RNC
None
None
None
RNC
None
None
None
RNC
None
None
None
RNC
None
None
None
RNC
None
None
None
RNC
None
None
None
RNC
None
None
None
RNC
None
Ethernet port
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
BSC6900
None
None
None
BSC6900
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (Impact on the UE in idle mode) Not involved
None
None
BSC6900
None
None
BSC6900
ALLOWED
ALLOWED
RNC
ATT needs to be set None when Read & Write "CNDomainId " is set to CS_DOMAIN; ATT does not None to be Read & Write need set when "CNDomainId " is set to PS_DOMAIN. Read & Write
None
60 None
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
1 E1/T1 port
None
None
None
BSC6900
None
None
None
PPP link
None
PPP link
None
None
MP group
None
BSC6900
None
None
PPP link
None
BSC6900
None
None
MP group
None
BSC6900
None
None
PPP link
None
PPP link
None
None
MP group
None
BSC6900
NO_V
NO_V
PPP link
None
PPP link
NO_V
NO_V
MP group
None
BSC6900
None
ENABLE
BSC6900
ON
None
BSC6900
None
None
BSC6900
None
AU4
7 Cell
N (No impact on the UE in "Availablesign None Read & Write idle mode) Not involved atureEndInde x" should be less than the N (No impact number of on the UE in preamble None Read & Write idle mode) Not involved signatures. The preamble signature is configured by None Optical port "PreambleSig Read & Write Y natures" in "Availablesign "ADD N (Impact on atureStartInde UPRACHBAS the UE in idle x" should be IC". Read & Write mode) Not involved no greater than "Availablesign N (Impact on atureEndInde the UE in idle x ". Read & Write mode) Not involved N (Impact on the UE in idle Read & Write mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
0 Cell
15
Physical 15 channel
None
None
None
RNC
None
HIGH
None
None
None
None
None
Board
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
Board
None
None
None
Board
None
None
None
Board
None
OFF
None
Board
None
OFF
None
Board
None
61
61 Cell
None
None
None
BSC6900
None
None
None
BSC6900
None
Not involved
None
None
None
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
None
None
Cell
None
GSM900_DCS GSM900_DCS 1800_BAND_U 1800_BAND_ SED USED Cell CONVERSATI ONAL:7; None STREAMING:8 Cell ; INTERACTIVE ,BACKGROUN D:64 RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
None
Cell
None
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (Impact on the UE in idle Read & Write mode) Not involved
None
None
Cell
None
None
None
Cell
None
0 Cell
None
-30
-30 Cell
None
-20
None
None
None
SCCP
None
Not involved
None
None
RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved
5 RNC
None
Not involved
2 RNC
None
Not involved
1 RNC
None
D384
RNC
None
5 RNC
None
5 RNC
None
5 RNC
None
5 RNC
None
RateDegrade
RNC
None
None
RNC
None
None
RNC
None when Read & Write Valid "BEQosPerfor m" is set to YES; "BeDlAct2" None Read & Write must be None when Valid when is "BeDlAct1" "BEQosPerfor set to None; m" is set to None Read & Write "BeDlAct2" YES; not be must when Valid "BeDlAct2" equal with "BEQosPerfor and "BeDlAct1" m" is set to "BeDlAct3" when None be None Read & Write YES; must "BeDlAct1" is "BeDlAct3" when to not set None must be "BeDlAct1" is None; when None; set to "BeDlAct3" or "BeDlAct1" "BeDlAct2" None be None Read & Write must "BeDlAct2" is and when None; set to "BeDlAct3" is "BeDlAct2" "BeDlAct3" must not be set tonot be must None; equal with "BeDlAct3" None with Read & Write equal "BeDlAct1" must not be "BeDlAct1" when with equal when "BeDlAct1" is "BeDlAct2" is "BeDlAct1" not set to andset to not None. Read & Write "BeDlAct1" None. when "BeDlAct3" "BeDlAct2" is must not be not set to equal with None. Read & Write "BeDlAct2" when "BeDlAct2" is not set to None. Read & Write The following relationship must be None Read & Write satisfied: "BeH2FTvmT hd" < "BeEFach2Cp cTvmThd". Read & Write
Not involved
Not involved
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
5 RNC
None
D1024
RNC
None
D0
RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
D1024
RNC
The following relationship must be satisfied: "D2F2PTvmT hd" < N (No impact "BeEFach2D on the UE in TvmThd". Read & Write idle mode) Not involved The following relationship must be None Read & Write satisfied: "BeH2FTvmT hd" < "BeEFach2H TvmThd". Read & Write N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
D0
RNC
None
D1024
RNC
None
D0
RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
D1024
RNC
None
None
D0
RNC
None
D1024
RNC
The following relationship must be None Read & Write satisfied: "BeH2FTvmT hd" < "BeF2CpcTv mThd". Read & Write The following relationship must be None Read & Write satisfied: "D2F2PTvmT hd" < "F2DTvmThd" . Read & Write
None
D0
RNC
None
D1024
RNC
None
D0
RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
D1024
RNC
None
None
D0
RNC
None
None
D1024
RNC
The following relationship must be satisfied: "BeH2FTvmT hd" < N (No impact "BeF2HTvmT on the UE in hd". Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
D0
RNC
None
None
65535 RNC
None
5 RNC
None
5 RNC
None
D1000
RNC
None
D64
RNC
The following relationship Read & Write None must be satisfied: "BeH2FTvmT hd" < None "BeF2HTvmT Read & Write hd"; "BeH2FTvmT hd" < "BeEFach2H Read & Write None TvmThd"; "BeH2FTvmT hd" < "BeEFach2Cp None Read & Write cTvmThd"; "BeH2FTvmT hd" < "BeF2CpcTv mThd". Read & Write
None
D5000
RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
D1440
D1440
RNC
None
None
20 RNC
Valid when This "BEQosPerfor N (No impact parameter is m" is set to on the UE in available if YES. Read & Write idle mode) Not involved the value of "BEQosPerfor m" in "SET N (No impact UQOSACT" is on the UE in YES. Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
10
10 Cell
None
YES
RNC
None
None
None
RAB
None
None
RAB
None
None
RNC
None
None
RNC
None
None
RNC
None
SINGLE
RNC
None
YES
RNC
"BEQosPerfor set to None; m" is set to "BeUlAct2" YES; not be must when Valid "BeUlAct2" At least one equal with "BEQosPerfor and of this "BeUlAct1" m" is set to "BeUlAct3" parameter when YES; must be None and the "BeUlAct1" is "BeUlAct3" when to "BetaD" one notleast None At set must be "BeUlAct1" parameter is None. of this None; when set to must be set to "BeUlAct3" parameter or "BeUlAct1" "BeUlAct2" 15. the None Read & Write must and be "BeUlAct2" is and when None; "BetaC" set to "BeUlAct3" is "BeUlAct2" parameter "BeUlAct3" must not be set tobe set to must not be must None; equal with "BeUlAct3" 15. with Read & Write equal "BeUlAct1" must not be "BeUlAct1" when with equal when "BeUlAct1" is "BeUlAct2" is "BeUlAct1" not set to andset to not None. Read & Write "BeUlAct1" None. when "BeUlAct3" "BeUlAct2" is must not be not set to equal with None. Read & Write "BeUlAct2" when "BeUlAct2" is not set to This None. Read & Write parameter is Valid when valid when "BEQosPerfor the m" is set to "BEQosPerfor This YES. set to Read & Write m" is parameter is YES and valid when "BeUlEvTrigIn the d" is set to "BEQosPerfor SINGLE. to Read & Write m" is set
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
YES
RNC
YES and "BeUlEvTrigIn N (No impact d" is set to on the UE in SINGLE. Read & Write idle mode) Not involved Valid when "BEQosPerfor N (No impact m" is set to on the UE in YES. Read & Write idle mode) Not involved Valid when "BEQosPerfor N (No impact m" is set to on the UE in YES. Read & Write idle mode) Not involved This parameter None satisfy Read & Write must the following relationship: "BGMBR" >= "BGGBR" Read & Write
None
NO
RNC
None
3000 RNC
Not involved
Not involved
32
32 Cell
512
512 Cell
100
100 Cell
120
120 Cell
None
06&00&00
Cell
0 Cell
None
01&00&00
Cell
ON
ON
Cell
5 Cell
None
None
RAB
This parameter is required when This the parameter of The value "TrchType" must satisfy this parameter is the following parameter set to relationship: must satisfy TRCH_DCH. "BGMBR" >= the following The setting of "BGGBR" relationship: Read & Write the "BgnAbnorma "SirAdjustSte lThd" >= p" parameter "BgnUpdateT is associated The this hd" value of Read & Write with this parameter. parameter Assume that must satisfy this the following parameter is Read & Write None relationship: changed from "BgnEndTime BLERquality1 " to >"MBgnStartT BLERquality2 The . ime" value of Read & Write and this "SirAdjustSte parameter p" is changed must satisfy from the following SirAdjustStep Read & Write None relationship: 1 to "BgnEndTime SirAdjustStep " Then, 2. >"MBgnStartT these values The .fulfill the ime" value of Read & Write must this following parameter(1condition: must satisfy BLERquality1 the following )x None relationship: Read & Write SirAdjustStep "BgnAbnorma 1/ lThd" >= BLERquality1 "BgnUpdateT = (1 hd" BLERquality2 Read & Write )x SirAdjustStep 2/ BLERquality2. Read & Write
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
FALSE
FALSE Cell
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
D2
RNC
None
None
D250
RNC
None
None
None
Cell
This paramter is valid only when "BlindHoFlag" N (No impact is setparamter to on the UE in This TRUE. only Read & Write idle mode) Not involved is valid when "BlindHOFlag " is set to If you set TRUE. Read & Write "Switch of stat blinking alarm" to "ENABLE", None you need to Read & Write set "Alarm switch of blinking filter" to "ENABLE". Read & Write N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
-92
-92 Cell
-115
-115 Cell
ENABLE
None
BSC6900
0 None
BSC6900
900 None
BSC6900
ENABLE
None
BSC6900
If you set None "Switch of stat blinking alarm" to "ENABLE", None you need to Read & Write set "Alarm switch of blinking filter" to "ENABLE". Read & Write
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
5000
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
NO
MP group
None
Not involved
None
None
BSC6900
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
None
None
None
None
None
None
None
None
None
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
None
None
None
None
Not involved
None
None
BSC6900
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
BSC6900
None
INCREMENTA L None
BSC6900
None
REQUIRED
REQUIRED
Cell
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
E1/T1 port
None
None
None
Cell
None
Cell
None
None
E1/T1 port
None
Not involved
None
None
BSC6900
None
Not involved
None
None
Board
None
Not involved
None
None
None
Not involved
None
None
None
None
Not involved
None
None
NO
NO
None
None
IP logical port None The dynamic bandwidth switch is turned only SCTP link None the Read & Write when IPPM function is activated through "ACT IP logical port IPPM". Read & Write
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved
Not involved
Not involved
0 BSC6900
None
Not involved
0 BSC6900
None
Not involved
20
20 BSC6900
None
Not involved
15
15 BSC6900
None
Not involved
0 BSC6900
None
Not involved
1 BSC6900
None
Not involved
0 BSC6900
None
Not involved
0 BSC6900
None
Not involved
5 BSC6900
None
Not involved
0 BSC6900
None
Not involved
120
None
None
When "GRPT" in 120 IP logical port None Read & Write "ADD RSCGRP" is Transmission set to IP, this resource parameter is group valid. Read & Write
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
25
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
None
None
None
3 RNC
None
NONE
RNC
None
None
AAL2 path
When the value of "CARRYT" in "ADD AAL2PATH" Read & Write None is set to UNI, IMA, FRAATM, NCOPT, or None Read & Write ATM LGCPORT, this parameter is valid. Read & Write
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
AAL2 path
NULL
NULL
IP path
None
None
SAAL link
When the value of None "CARRYT" is Read & Write Y When the set to of value FRAATM, this "CARRYT" in parameter is "ADD valid. AAL2PATH" Read & Write Y is set to FRAATM, this parameter is valid. Read & Write Y
IP path
SAAL link
None
None
AAL2 path
AAL2 path
None
None
IPoA PVC
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
None
None
None
SAAL link
When the value of None "CARRYT" is Read & Write Not involved When the set to of value IMA, this "CARRYT" in parameter is "ADD valid. AAL2PATH" Read & Write Y is set to IMA, this parameter is valid. Read & Write Y
Not involved
SAAL link
None
None
AAL2 path
AAL2 path
None
None
IPoA PVC
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
None
None
Not involved
None
None
NodeB
None
None
SAAL link
When the value of None "CARRYT" is Read & Write Not involved When the set to of value NCOPT, this "CARRYT" in parameter is "ADD valid. AAL2PATH" Read & Write Y is set to NCOPT, this parameter is valid. Read & Write Y
Not involved
SAAL link
None
None
AAL2 path
AAL2 path
None
None
IPoA PVC
None
None
None
None
SAAL link
None
None
AAL2 path
None
None
SAAL link
None
None
SAAL link
None
None
AAL2 Path
When the value the None of Read & Write When "CARRYT" is value of set to IMA, in "CARRYT" UNI, "ADD FRAATM, AAL2PATH" Read & Write None NCOPT,UNI, is set to or ATMLOGICP IMA, ORT, this FRAATM, When the parameter is NCOPT, or value valid. of Read & Write ATM "CARRYT" is LGCPORT, set to IMA, this UNI, parameter is When the FRAATM, valid. of or Read & Write value NCOPT, "RscMngMod ATMLOGICP e" in this ORT,"ADD NODEB" of parameter is the resource Read & Write valid. corresponding NodeB is set to EXCLUSIVE, None Read & Write the AAL2 Path must carry on ATM LGCPORT or RSCGRP Read & Write
Not involved
Not involved
SAAL link
AAL2 path
SAAL link
SAAL link
AAL2 path
None
None
IPoA PVC
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
None
None
Not involved
None
None
Not involved
None
None
None
None
None
SAAL link
When the value of None "CARRYT" is Read & Write Not involved When the set to of value UNI, this "CARRYT" in parameter is "ADD valid. AAL2PATH" Read & Write Y is set to UNI, this parameter is valid. Read & Write Y
Not involved
SAAL link
None
None
AAL2 path
AAL2 path
None
None
IPoA PVC
None
None
None
None
SAAL link
None
None
IPoA PVC
None
None
SAAL link
When the value of None "CARRYT" is set to IMA, UNI, FRAATM, None NCOPT, or ATMLOGICP ORT, this When the is parameter value of valid. "CARRYT" is set to IMA, UNI, FRAATM, None NCOPT, or ATMLOGICP ORT, this parameter is valid.
N (No impact on the UE in Read & Write idle mode) Not involved
Not involved
SAAL link
BSC6900
SAAL link
None
None
IPoA PVC
None
None
SAAL link
When the value of "CARRYT" is When the None Read & Write Y set to of value ATMLOGICP "CARRYT" in ORT, this "ADD parameter is AAL2PATH" valid. to ATM Read & Write Y is set LGCPORT, this parameter is valid.
BSC6900
SAAL link
None
None
AAL2 path
AAL2 path
None
None
IPoA PVC
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
Subsystem
None
None
None
Subsystem
None
4500
85
85 Board
85
80 Board
None
None
Cell
70
75 Board
70
70 Board
None
None
Cell
None Before configuring this parameter, you need to None configure the information about the common None logical traffic channel by running "ADD UCTCH". At the same None time, you need to set the CBS scheduling None parameter of the cell by running "ADD UCELLCBSD RX".
Not involved
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
Cell
None
Not involved
ON
ON
Board
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
None
None
None
When the interface type is Iub, transmission type is ATM or dual stack, the RNC OFF parameter is When the RT_VBR; interface type transimssion is Iub, IP or type is None IP, the BSC6900 transmission Hybird type is ATM parameter isor IP, EF.the parameter is When the interface 32 NULL; type Cell 32 transimssion is Iur, type is dual transmission stack, ATM, type isthe parameter is the parameter 512 EF; is RT_VBR;512 Cell transimssion Hybird type is IP, the IP, the parameter is parameter is BSC6900 EF. LQEF. When the interface type is Iur, 100 transmission BSC6900 100 type is ATM or IP, the parameter is NULL. BSC6900
None This parameter must satisfy None the following relationship: This "CCCHMBR" parameter >= satisfy must "CCCHGBR" the following When the relationship: value of "CCCHMBR" "ITFT" in >= "ADD "CCCHGBR" TRMMAP" is set to IUB or IUR, this parameter is valid. When the value of "ITFT" in "ADD None TRMMAP" is set to IUB or IUR, this parameter is valid.
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
0 BSC6900
None
1000
Not involved
None
1000(UNI), 200(NNI)
SAAL link
None
N (No impact on the UE in Read & Write idle mode) Not involved
1024
1024 PVC
None
Not involved
None
15 RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
None
Cell
This parameter is valid when the "CellLocCfgTy This pe" is set to parameter is BOTH or N (No impact valid when CELL_ANTE on the UE in the NNA. Read & Write idle mode) Not involved "CellLocCfgTy pe" is set to BOTH or N (No impact CELL_ANTE on the UE in NNA. Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
None
Cell
None
None
Cell
None
None
Cell
None
None
Cell
None
None
Cell
None
None
Cell
None
None
Cell
None
None
Cell
None This parameter is valid when the None "CellLocCfgTy Read & Write This pe" is set to parameter is BOTH or valid when CELL_CENT the ER. "CellLocCfgTy Read & Write This pe" is set to parameter is BOTH or valid when CELL_CENT the ER. "CellLocCfgTy Read & Write This pe" is set to parameter is BOTH or valid when CELL_CENT the ER. "CellLocCfgTy Read & Write This pe" is set to parameter is BOTH or valid when CELL_CENT the ER. "CellLocCfgTy Read & Write This pe" is set to parameter is BOTH or valid when CELL_CENT the ER. "CellLocCfgTy Read & Write pe" is set to BOTH or CELL_CENT ER. Read & Write This parameter is valid when the None "CellLocCfgTy Read & Write pe" is set to BOTH or CELL_ANTE NNA. Read & Write
None
None
Cell
None
None
Cell
TU
TU
Cell
None
None
Cell
This parameter is valid when the None "CellLocCfgTy Read & Write This pe" is set to parameter is BOTH or valid when CELL_ANTE the NNA. "CellLocCfgTy Read & Write
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
None
Cell
pe" is set to BOTH or N (No impact CELL_ANTE on the UE in NNA. Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
15 RNC
None
None
None
None
None
None
Not involved
None
None
Cell
None
None
Cell
None
None
Cell
The SMLC parameters of the cell None Read & Write identified by this parameter must have None Read & Write been configured through "ADD USMLCCELL" . Read & Write
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
None
None
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
Cell
None
None
None
Cell
None
None
None
Cell
None
10 RNC
None
OFF
RNC
ACTIVE
ACTIVE
Cell
None
UE_ASSISTE D RNC
SF8
SF8
Cell
None Read & Write This parameter is valid when "CellIDChgSw itch" is ON Read & Write This parameter is valid when the None "CellLocCfgTy Read & Write pe" is set to BOTH or CELL_ANTE NNA. Read & Write The value of this parameter must not be None than Read & Write larger "DlHoCeCode ResvSf" in "ADD UCELLCAC". Read & Write
Not involved
Not involved
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
None
Cell
None
None
Cell
90
90 Cell
The value of None this parameter must satisfy the following None relationship: Read & Write "CellOverrunT hd" >= "CellUnderrun Thd". Read & Write
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
9 RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
180 RNC
None
None
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
AFFECT
AFFECT
Cell
None
AFFECT
AFFECT
Cell
None
45 RNC
30
30 Cell
The value of None this parameter must satisfy the following None relationship: Read & Write "CellOverrunT hd" >= "CellUnderrun Thd". Read & Write
95
85 Board
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
95
80 Board
None
80
75 Board
None
80
70 Board
None
ON
ON
Board
None
None
None
BSC6900
None
None
None
Cell
None
None
None
FG_SWITCH: OFF, CFG_MULTI_ RAB_SWITCH: ON, CFG_PDCP_I PV6_HEAD_C OMPRESS_S WITCH:OFF, CFG_PDCP_R None FC2507_HC_S RNC WITCH:OFF, CFG_PDCP_R FC3095_HC_S WITCH:OFF RNC
None
Cell
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
BSC6900
None
None
None
BSC6900
None
None
None
BSC6900
None
None
None
BSC6900
None
None
2 RNC
None
None
5 RNC
5 IP path
When None the value of "PATHCHK" in "ADD IPPATH" is None set to ENABLED, this parameter is valid.
Not involved
N (No impact on the UE in Read & Write idle mode) Not involved
None
None
RNC
None
Not involved
None
None
None
None
Not involved
None
None
None
None
N (No impact on the UE in Read & Write idle mode) Not involved
NO
NO
SCTP link
None
SCTP link
NO
NO
SCTP link
None
SCTP link
CRC32
CRC32
SCTP link
None
SCTP link
None
None
None
None
Not involved
None
TEN_MSEC
RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
TEN_MSEC
RNC
None
None
TEN_MSEC
RNC
None
None
TEN_MSEC
RNC
None
None
TEN_MSEC
RNC
None
None
TEN_MSEC
RNC
None
None
TEN_MSEC
RNC
None
TEN_MSEC
TEN_MSEC
Cell
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
TEN_MSEC
TEN_MSEC
Cell
None
TEN_MSEC
TEN_MSEC
Cell
None
TEN_MSEC
TEN_MSEC
Cell
None
None
None
RNC
None
Not involved
None
None
Cell
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
0 Cell
None
0 Cell
None
0 Cell
None
Cell
0 Cell
None
N (Impact on the UE in idle Read & Write mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
0 Cell
None
None
None
CMP_IU_IMS_ PROC_AS_N ORMAL_PS_S WITCH:OFF, ERR_PFM_5E CMP_IU_SYS Board None 6 HOIN_CMP_IU UP_FIXTO1_S WITCH:OFF, CMP_IUR_H2 None None D_FOR_LOW BSC6900 R5_NRNCCEL L_SWITCH:OF F, CMP_IUR_SH BSC6900 None None O_DIVCTRL_ SWITCH:OFF, CMP_UU_AM R_SID_MUST FALSE CMCF_DL_HL Cell FALSE _CFG_SWITC S_SWITCH:OF H:OFF, F, CMP_UU_DST CMCF_UL_HL _SERV_CELL UL_DL_BOTH S_SWITCH:OF NodeB UL_DL_BOTH _D2E_SWITC F, H:OFF, WALKING_SP CMCF_UL_PR WALKING_SP CMP_UU_IGN EED_AND_HO ECFG_TOLER EED_AND_HO ORE_UE_RLC T_SPOT_CEL ANCE_SWITC T_SPOT_CELL _CAP_SWITC Cell L H:OFF, H:ON, CMCF_WITHO CMP_UU_SER UT_UE_CAP_ V_CELL_CHG REPORT_SWI _WITH_ASU_ None TCH:OFF SWITCH:OFF, RNC CMP_UU_SER V_CELL_CHG _WITH_RB_M OD_SWITCH: RNC None 5000 ON, CMP_UU_VOI P_UP_PROC_ AS_NORMAL_ None None PS_SWITCH: BSC6900 ON, CMP_UU_FDP CH_COMPAT_ SWITCH:OFF, BSC6900 None None CMP_UU_AM R_DRD_HHO_ COMPAT_SWI TCH:OFF, None None CMP_IU_QOS BSC6900 _ASYMMETR Y_IND_COMP AT_SWITCH:O None FF RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
BSC6900
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
Cell
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
None
None
None
None
None
None
None
None
None
None
RNC
None
None
RAB
This parameter cannot be set to None Read & Write CS_DOMAIN when the "TrafficClass" parameter is None Read & Write set to INTERACTIV E or BACKGROU ND. Read & Write
Not involved
Not involved
Not involved
Not involved
None
None
RAB
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
None
RNC
None
Not involved
None
None
RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
None
Not involved
None
None
None
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
None
BSC6900
None
Not involved
None
None
RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
None
RNC
None
None
Cell
This paramter is valid only when None "CnOpGrpInd Read & Write ex" in "ADD CNOPERGR OUP" is added. Read & Write
Not involved
Not involved
None
None
None
None
None
None
This paramter is valid only when "CnOpGrpInd ex" in "ADD CNOPERGR OUP" is Cell added. Read & Write When "RSCMNGM ODE" in "ADD RSCGRP" is RNC None Read & Write set to EXCLUSIVE, Transmission this resource parameter is group valid. Read & Write
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
Not involved
Not involved
None
None
RNC
None
Not involved
None
None
RNC
None
Not involved
None
None
Cell
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
None
BSC6900
None
Not involved
None
None
RNC
None
Not involved
None
None
RNC
None
Not involved
None
None
RNC
None
Not involved
None
None
RNC
None
Not involved
255 None
RNC
None
Not involved
None
None
RNC
None
Not involved
None
None
RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
BSC6900
None
None
BSC6900
0 None
None
0 None
None
ON
ON
Cell
3 Cell
13
13 Cell
13
13 RNC
SF8
SF8
Cell
SF8
SF8
RNC
If this None parameter is set through both the "ADD If this None UCELLDRD" parameter is andthrough set "SET UDRD" both the commands, "ADD If this the parameter None UCELLDRD" parameter is set through andthrough "SET set "ADD the UDRD" both the UCELLDRD" commands, "ADD command If this the parameter None UCELLDRD" takes parameter set throughis andthrough precedence set "SET the "ADD UDRD" set over the both that UCELLDRD" commands, through the "ADD command This paramter the parameter "SET UDRD" None only UCELLDRD" takes is valid set through command. and "SET precedence when the "ADD This that set UDRD" over "CodeAdjFor UCELLDRD" parameter is commands, through the HsdpaSwitch" command valid only the parameter "SET to ON. is set UDRD" takes when the set through command. precedence "CodeBalanci the "ADD This that set over ngDrdSwitch" UCELLDRD" parameter is through the parameter is command valid only "SET ON. set to UDRD" takes the when command. precedence "CodeBalanci This that set over ngDrdSwitch" parameter is through the parameter is valid only "SET UDRD" set to the when ON. command. "CodeBalanci This ngDrdSwitch" parameter is parameter is valid only set to the when ON. "CodeBalanci ngDrdSwitch" parameter is set to ON.
OFF
OFF
Cell
OFF
OFF
RNC
FALSE
FALSE Cell
the parameter UCELLDRD" set through and "SET the "ADD UDRD" UCELLDRD" commands, command the parameter takes set through precedence the "ADD over that set UCELLDRD" This through the command is parameter "SET UDRD" takesonly valid command. precedence Read & Write when over that set INTER_FREQ through the _HHO_SWIT "SET UDRD" CH of the command. in Read & Write "HoSwitch" "SET UCORRMAL GOSWITCH" is set to ON. Read & Write Configured only when the None "ChCodingTy Read & Write pe" is configured as CONVOLUTI ONAL. Read & Write
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
ENGLISH
RNC
D1/2
D1/2
Transport channel
Not involved
Not involved
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
70 RNC
20
20 Cell
3 None
RNC
None
This parameter is available if None the value of Read & Write When "BEQosPerfor "MOCNSuppo m" in "SET rt" in "SET UQOSACT" is UOPERATOR Read & Write YES. SHARINGMO DE" is set to YES, CommPlmnU None Read & Write singType needs to be set.Otherwise ,it does not need. Read & Write When the value of None "SAALLNKT" Read & Write is set to NNI, this parameter is valid. Read & Write
None
None
BSC6900
2 SAAL link
30
30 SAAL link
When the value of "SAALLNKT" is set to NNI, this the N (No impact When parameter is on the UE in value of valid. Read & Write idle mode) Not involved "SAALLNKT" is set to NNI, this N (No impact parameter is on the UE in valid. Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
10
10 SAAL link
None
None
None
None
25
25 BSC6900
None
25
25 BSC6900
None
None
None
None
None
50
50 BSC6900
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
50
50 BSC6900
None
None
None
Cell
None
This parameter is Noneonly Read & Write valid when "ConnCellBarr ed" is set to BARRED. Read & Write
NO
NO
None
None
N (No impact on the UE in Read & Write idle mode) Not involved N (Impact on the UE in idle mode) Not involved N (Impact on the UE in idle mode) Not involved
2 Cell
1 Cell
This parameter is valid only None Read & Write when "QualMeas" is set to CPICH_ECN O. Read & Write This
0 Cell
parameter is valid when N (No impact "SIB12Ind" is on the UE in set to TRUE. Read & Write idle mode) Not involved This parameter is valid when N (No impact "SIB12Ind" is on the UE in set to TRUE. Read & Write idle mode) Not involved N (Impact on the UE in idle Read & Write mode) Not involved N (Impact on the UE in idle Read & Write mode) Not involved
0 Cell
4 Cell
None
5 Cell
None
D1280
D1280
Cell
This parameter is valid only when "ConnCellBarr N (No impact ed" is set to on the UE in BARRED. Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (Impact on the UE in idle Read & Write mode) Not involved
None
None
BSC6900
None
-20
-20 Cell
None
NO
NO
Not involved
None
D16
RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
This parameter must satisfy None D16 RNC None the following Read & Write relationship: This "CONVMBR" parameter >= satisfy mustfollowing The 32 32 Cell "CONVGBR" Read & Write the following relationship relationship: must be "CONVMBR" satisfied: >= "GoldMaxMod The following 512 512 Cell "CONVGBR" Read & Write e" >= relationship "SilverMaxMo CountCThres must be de" >= hold needs satisfied: to NBAMR_BITR NBAMR_BITR "CopperMaxM be set when "GoldMaxMod ATE_12.20K ATE_12.20K Cell ode". "CounterChec Read & Write e" >= kSwitch" in "SilverMaxMo "SET de" >= UCNTCHK" is WBAMR_BITR WBAMR_BITR "CopperMaxM set to ON; ATE_23.85K ATE_23.85K Cell ode". Read & Write CountCThres hold does not need to be set when 5 5 Ethernet port None "CounterChec Read & Write kSwitch" in "SET UCNTCHK" is None None RNC set to OFF. Read & Write
Not involved
Not involved
None
None
RNC
N (No impact on the UE in This paramter None only Read & Write idle mode) Not involved is valid when "TxDiversityIn N (No impact d" is paramter set to on the UE in This TRUE. only Read & Write idle mode) Not involved is valid when "TxDiversityIn d" is set to TRUE. Read & Write Y
Cell
90
90 Board
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
75
80 Board
None
None
90 RNC
None
None
RNC
None
None
RNC
None
None
BSC6900
None
None
BSC6900
8 Cell
parameter is valid when "Dtxvalid" is set to ON. Read & Write This parameter is required when the "UseOfHcs" Read & Write None parameter is set to USED but not required when None Read & Write the "UseOfHcs" parameter is set to NOT_USED. Read & Write
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
None
is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transimssion type is IP or When IP, Hybirdthe the interface type parameter is 85 is Iub, 85 Board AF43. transmission When the type is ATM or interface type IP, the is Iur, transmission 75 parameter is 75 Board NULL; ATM, type is transimssion the parameter type is dual is RT_VBR; stack, the transimssion 75 parameter the Board type is IP, is 75 AF43; parameter is transimssion AF43. type is Hybird When the IP, the 65 interface type Board 65 parameter is is Iu-CS, LQAF43. transmission When ATM, type isthe interface type the parameter 100 is RT_VBR;100 BSC6900 Iur, transmission transimssion type is ATM or IP, the IP, the parameter is parameter is BSC6900 AF43. NULL. When the interface type is Iu-CS, 100 transmission BSC6900 100 type is ATM or IP, the parameter is NULL. BSC6900
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
When None the value of "ITFT" in "ADD TRMMAP" is None IUB or set to IUR or IUCS, this parameter is valid. When the value of "ITFT" in "ADD None TRMMAP" is set to IUB or IUR, this parameter is valid.
0 BSC6900
None
100
100 BSC6900
None
None
BSC6900
80
80 Cell
None This parameter is valid when "NcovHoOn2 None in Read & Write GldInd" "SET UINTERRAT HONCOV" is set to ON. Read & Write
Not involved
Not involved
None
OFF
RNC
None
None
None
None
None
OFF
None
None
When the interface type is Iub, 900 transmission RNC type is ATM or dual stack, the parameter is RT_VBR; SUPP_NONE RNC transimssion type is IP or When IP, Hybirdthe the interface type parameter is None None is Iub, AF43. transmission When the type is ATM or interface type IP, the is Iur, parameter is transmission Cell None NULL; ATM, type is transimssion the parameter type is dual is RT_VBR; stack, the transimssion TRUE parameter is type is IP, the RNC AF43; parameter is transimssion AF43. type is Hybird When the IP, the interface type Cell OFF parameter is Iu-CS, is LQAF43. transmission When the type is ATM, interface type the parameter 100 is RT_VBR;100 BSC6900 Iur, transmission transimssion type is ATM or IP, the IP, the parameter is parameter is BSC6900 AF43. NULL. When the interface type is Iu-CS, 100 transmission BSC6900 100 type is ATM or IP, the parameter is NULL. BSC6900
"CNProtclVer" value of set when in "ADD "CsNriCfgMod "CsInfoUpdFl UCNNODE" e" in "SET ag" in to R5 or is set "SET UOPERATOR any later CFGPARA" is version set to ON; CsNriCfgMod SUPP_IUFLE CsInfoUpdTm e may be set X, r does not to SUPP_MOCN need to be SUPP_MOCN or set when or None SUPP_IUFLE "CsInfoUpdFl Read & Write SUPP_IUFLE X_MOCN; ag" in "SET X_MOCN CSNRILength UOPERATOR when not does CFGPARA" is "CNProtclVer" need OFF. set to to be in "ADD the Read & Write set when UCNNODE" value of is set to R6 or "CsNriCfgMod any later e" in "SET version UOPERATOR Read & Write CFGPARA" is set to SUPP_NONE . Read & Write When "DsacAutoSwi tch"is set to None Read & Write ON,the parameter need configuring;el se,need not. Read & Write
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (Impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
When the None value of "ITFT" in "ADD TRMMAP" is None IUB or set to IUR or IUCS, this parameter is valid. When the value of "ITFT" in "ADD None TRMMAP" is set to IUB or IUR, this parameter is valid.
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
0 BSC6900
None
None
CS_AMRC_S WITCH:OFF, CS_HANDOV ER_TO_UTRA N_DEFAULT_ CFG_SWITCH :ON, CS_IUUP_V2_ SUPPORT_S 100 WITCH:OFF, BSC6900 100 CS_ZERO_C_ AMR_CFG_T WO_CODCH_ SWITCH:OFF RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
DCH
DCH
RNC
None
5 RNC
None
5 RNC
None
None
OFF
OFF
RNC
None
None
ON
BSC6900
none
None
None
Physical channel
None
Not involved
BIT2
BIT2
Physical channel
None
Not involved
BIT4
BIT4
Physical channel
None
Not involved
95
95 Board
None
N (No impact on the UE in Read & Write idle mode) Not involved
95
85 Board
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
5 RNC
None
None
50 RNC
None
None
None
Not involved
ON
ON
BSC6900
None
Not involved
None
None
BSC6900
None
None
RNC
None
D64
RNC
The following relationship must None be Read & Write satisfied: "D2F2PTvmT hd" < "F2DTvmThd" None Read & Write ; "D2F2PTvmT hd" < "BeEFach2D TvmThd". Read & Write
Not involved
Not involved
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
D1000
RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
D5000
RNC
None
NOLIMIT
NOLIMIT
BSC6900
None
None
None
BSC6900
None
None
30 RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
None
None
None
None
30 RNC
None
None
100 RNC
16
16 RAB
2 RAB
None
255 RNC
None When "MOCNSuppo rt" in "SET UOPERATOR Read & Write None SHARINGMO DE" is set to YES, DefaultCnOp None Read & Write optionally needs to be set.Otherwise ,it does not need. Read & Write
-22
-22 RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
-13
-13 Cell
None
None
None
None
None
RNC
None
None
None
RAB
None
None
RAB
7 RNC
None
None
Cell
None
None
Cell
This parameter is Read & Write None valid only when the "CodeBalanci This ngDrdSwitch" None parameter is Read & Write required when set to ON the through the "QrxlevminExt "SETparamter This UDRD" Sup" command. is valid only Read & Write parameter is when TRUE set to "QrxlevminExt but not Sup" is set to required when TRUE. Read & Write the "QrxlevminExt Sup" parameter is set to FALSE. Read & Write
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (Impact on the UE in idle mode) Not involved
None
None
SCCP
None
Not involved
None
None
BSC6900
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
None
None
BSC6900
None
Not involved
None
None
None
None
Not involved
None
None
Not involved
None
None
BSC6900
None
Not involved
None
None
BSC6900
None
Not involved
None
DEFAULTPOR T BSC6900
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
1 None
None
None
None
BSC6900
None
None
None
BSC6900
None
Not involved
None
None
BSC6900
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
None
BSC6900
None
None
None
BSC6900
None
None
None
RAB
None
None
MAY
RNC
None
50 RNC
This parameter is valid only None Read & Write when "AFSetObj" is set to GOLD, SILVER, or COPPER. Read & Write
64
64 Cell
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
10 RNC
None
D6
RNC
D128
D128
RNC
D8
D8
RNC
D8
D8
Cell
D64
D64
RNC
If this This parameter is parameter is set through valid the "SET both only when UFRCCHLTY If this "AFSetObj" is PEPARA" is parameter set to GOLD, andthrough set "ADD SILVER, or UCELLFRC" both the "SET COPPER. commands, UFRCCHLTY the parameter PEPARA" set through and "ADD the "ADD UCELLFRC" UCELLFRC" None commands, This command the parameter parameter takes set through can be used precedence the selection for "ADD over that set UCELLFRC" None initial of the through the command rate for "SET BE takes services only UFRCCHLTY precedence when the PEPARA" over that set DCCC_SWIT command. through the CH under the "SET "Chswitch" UFRCCHLTY parameter is PEPARA" set to on command. through the "SET CORRMALG OSWITCH" command.
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
D64
D64
RNC
None
64
64 Cell
None
64
64 Cell
None
5 RNC
0 Cell
90
90 Cell
The value of None this parameter must satisfy the following relationship: None "DlOlcTrigThd "(See "ADD UCELLLDM") >= None "DlCellTotalT hd"; "DlCellTotalT hd" >= "DlHOThd"
SF/2
SF/2
NodeB
None
None
Cell
80
80 Cell
80
80 Cell
The value of this value of The parameter this must satisfy parameter None the following must satisfy relationship: the following The value of "DLOVSFSF" relationship: this >"DLCODEN "DlHOThd" > parameter O". "DlConvAMR must satisfy Thd"; the following "DlConvAMR relationship: Thd" > "DlHOThd" > "DlOtherThd" "DlConvNonA MRThd"; "DlConvNonA MRThd" > "DlOtherThd"
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
3 Cell
None
3 NodeB
3 Cell
3 NodeB
None
D64
RNC
D64
D64
Cell
D64
D64
RNC
SF32
SF32
Cell
For the BE users with the None the Read & Write same When "TrafficClass", value of "THPClass" "DlMidRateCa and lc" is "BearType" HAND_APPO Read & Write None values, INT, themake sure: following "UlGBR" of relationship GOLD users must be None ("UserPriority" satisfied: of Read & Write The value is set to "DlDcccRateT this This GOLD) >= hd" <= parameter is "UlGBR" of "DlMidRateTh must satisfy availableusers SILVER if d". following Read & Write the value of ("UserPriority" relationship: "BEQosPerfor is set to "DlHoCeCode m" in "SET SILVER)>= ResvSf" >= UQOSACT" is "UlGBR" of "DlLdrCreditSf Read & Write YES. COPPER ResThd"; users "DlHoCeCode ("UserPriority" ResvSf" >= is set to "CellLdrSfRes COPPER). Read & Write Thd". (For detailed information, refer to "ADD UCELLLDR") Read & Write
85
85 Cell
the following relationship: "DlCellTotalT hd" >= "DlHOThd" ; "DlHOThd" > "DlConvAMR Thd"; "DlHOThd" > N (No impact "DlConvNonA on the UE in MRThd" Read & Write idle mode) Not involved This parameter is valid only None Read & Write when "AFSetObj" is set to GOLD, SILVER, or COPPER. Read & Write N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
0 Cell
None
10 RNC
200000
200000 Cell
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
20
20 Cell
None
1 Cell
None
None
5 RNC
None
1 Cell
1 NodeB
SF8
SF8
Cell
None The value of this parameter must not be None than Read & Write larger "DlHoCeCode ResvSf" in "ADD UCELLCAC". Read & Write
SF8
SF8
NodeB
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
NoAct
NoAct
Cell
None
NoAct
NoAct
Cell
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
NoAct
NoAct
NodeB
None
CodeAdj
CodeAdj
Cell
None
BERateRed
BERateRed
NodeB
None
NoAct
NoAct
Cell
None
NoAct
NoAct
NodeB
None
NoAct
NoAct
Cell
1 Cell
1 NodeB
60
60 Cell
None The value of this parameter must satisfy the following Read & Write None relationship: "DlLdrTrigThd " >= "DlLdrRelThd" None Read & Write ; "DlOlcRelThd " >= "DlLdrRelThd" . Read & Write
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
NoAct
NoAct
NodeB
None
NoAct
NoAct
Cell
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
NoAct
NoAct
Cell
None
NoAct
NoAct
NodeB
NoAct
NoAct
Cell
BERateRed
BERateRed
Cell
NoAct
NoAct
NodeB
70
70 Cell
The value of this None Read & Write parameter must satisfy the following relationship: None "DlLdrTrigThd Read & Write " >= "DlLdrRelThd" ; "DlOlcTrigThd Read & Write None "> "DlLdrTrigThd "; "DlOtherThd"( None Read & Write See "ADD UCELLCAC") >= "DlLdrTrigThd ". Read & Write
1000
1000 Cell
None This parameter is valid when None the "DlRateUpAdj Level" in "SET UDCCC" is None set to 3_Rates, or when "DlRateDnAdj None in Level" "SET UDCCC" is set to 3_Rates.
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
D64
D64
NodeB
0 Cell
D1
D1
Cell
None
HAND_APPOI NT RNC
None
D128
RNC
None
3000 RNC
None
3000 RNC
set to HAND_APPO INT, and the following relationship must be satisfied: The following "DlDcccRateT relationship hd" <= must be "DlMidRateTh satisfied: d". "UlModeChan Read & Write The following geTimerLen" relationship <= be must "DlModeChan satisfied: geTimerLen". Read & Write "UlModeChan geTimerLen" This <= parameter is "DlModeChan valid only geTimerLen". Read & Write when
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
100 RNC
"AFSetObj" is set to GOLD, N (No impact SILVER, or on the UE in COPPER. Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
5 RNC
None
3 Cell
3 Cell
None
D3
RNC
85
85 Cell
0 Cell
None
100 RNC
95
95 Cell
None The value of this parameter must satisfy the following Read & Write None relationship: "DlOlcTrigThd " >= "DlOlcRelThd None "; value of Read & Write The "DlOlcRelThd this " >= parameter "DlLdrRelThd" must satisfy . following Read & Write the relationship: "DlOlcTrigThd " >= "DlOlcRelThd Read & Write None "; "DlOlcTrigThd "> "DlLdrTrigThd None Read & Write "; "DlOlcTrigThd " >= "DlCellTotalT hd". Read & Write
75
75 Cell
"DlConvAMR Thd" > "DlOtherThd"; "DlConvNonA MRThd" > "DlOtherThd"; "DlOtherThd" The value of >= this "DlLdrTrigThd N (No impact parameter "(Seesatisfy "ADD on the UE in must UCELLLDM") Read & Write idle mode) Not involved the following relationship: "DLOVSFSF" N (No impact >"DLCODEN on the UE in O". Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
Cell
1 Cell
None
1 NodeB
None
1 Cell
None
1 NodeB
None
None
NO
RNC
Valid when "AMRQosPerf N (No impact orm" is set to on the UE in YES. Read & Write idle mode) Not involved Valid when "AMRQosPerf N (No impact orm" is set to on the UE in YES. Read & Write idle mode) Not involved Valid when "AMRQosPerf N (No impact orm" is set to on the UE in YES. Read & Write idle mode) Not involved This parameter is Nonewhen Read & Write valid the "VPQosPerfor m" is set to YES. Read & Write N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
NO
RNC
None
NO
RNC
20
20 Cell
None
NO
RNC
None
NO
RNC
Valid when "AMRQosPerf N (No impact orm" is set to on the UE in YES. Read & Write idle mode) Not involved
None
NO
RNC
Valid when "AMRQosPerf N (No impact orm" is set to on the UE in YES. Read & Write idle mode) Not involved Valid when "AMRQosPerf N (No impact orm" is set to on the UE in YES. Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
NO
RNC
None
OFF
RNC
None
None
3_Rates
RNC
None
None
3_Rates
RNC
None
5 Cell
None
None
None
Cell
None
None
FALSE RNC
None
D64
D64
Cell
None
10 RNC
This parameter is valid only None Read & Write when "AFSetObj" is This set to parameter is NOPRIORITY valid only . Read & Write when
None
100 RNC
"AFSetObj" is set to GOLD, N (No impact SILVER, or on the UE in COPPER. Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
D64
D64
RNC
None
None
50 RNC
The following relationship must be satisfied: "DlThdE1" <= The following "DlThdE2" < N (No impact relationship "DlThdF2" <= on the UE in must be "DlThdF1". Read & Write idle mode) Not involved satisfied: "DlThdE1" <= The following "DlThdE2" < N (No impact relationship "DlThdF2" <= on the UE in must be "DlThdF1". Read & Write idle mode) Not involved satisfied: "DlThdE1" <= The following "DlThdE2" < N (No impact relationship "DlThdF2" <= on the UE in must be "DlThdF1". Read & Write idle mode) Not involved satisfied: "DlThdE1" <= The following "DlThdE2" < N (No impact relationship "DlThdF2" <= on the UE in must be "DlThdF1". Read & Write idle mode) Not involved satisfied: "DlThdE1" <= The following "DlThdE2" < N (No impact relationship "DlThdF2" <= on the UE in must be "DlThdF1". Read & Write idle mode) Not involved satisfied: "DlThdE1" <= The following "DlThdE2" < N (No impact relationship "DlThdF2" <= on the UE in must be "DlThdF1". Read & Write idle mode) Not involved satisfied: "DlThdE1" <= The following "DlThdE2" < N (No impact relationship "DlThdF2" <= on the UE in must be "DlThdF1". Read & Write idle mode) Not involved satisfied: "DlThdE1" <= "DlThdE2" < N (No impact "DlThdF2" <= on the UE in "DlThdF1". Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
50 RNC
None
50 RNC
None
50 RNC
None
120 RNC
None
120 RNC
None
120 RNC
None
120 RNC
80
80 Cell
None
64
64 Cell
None
None
None
IMA group
None
None
None
RNC
None
OPEN
None
None
None
None
SCCP
When the value of "SPDF" in None Read & Write "ADD N7DPC" is set to DNF, this parameter is valid. Read & Write This parameter is valid when "Dtxvalid" is set to ON. This parameter is valid when "Dtxvalid" is set to ON.
BSC6900
None
None
RNC
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
RNC
None
None
RNC
None
None
None
SCCP
None
Not involved
None
None
Cell
None
None
Cell
N (No impact on the UE in This paramter None only Read & Write idle mode) Not involved is valid when "TxDiversityIn d" is paramter This set to TRUE. only Read & Write Y Cell is valid when "TxDiversityIn N (No impact d" is paramter set to on the UE in This TRUE. only Read & Write idle mode) Not involved is valid when "TxDiversityIn d" is set to TRUE. Read & Write Y
None
None
Cell
None
None
Cell
Cell
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
None
SCCP
None
Not involved
None
None
None
None
None
None
DL_FLOW_CO NTROL_SWIT CH:OFF, DRA_HSDPA_ STATE_TRAN S_SWITCH:OF F, DRA_HSUPA_ DCCC_SWITC H:ON, None DRA_HSUPA_ Ethernet port STATE_TRAN S_SWITCH:OF F, DRA_IU_QOS Ethernet port None _RENEG_SWI TCH:OFF, DRA_PS_BE_ STATE_TRAN None S_SWITCH:O SCCP N, DRA_PS_NON _BE_STATE_ TRANS_SWIT Adjacent node None CH:OFF, DRA_R99_DL _FLOW_CONT ROL_SWITCH: None RNC OFF, DRA_THROU GHPUT_DCC C_SWITCH:O FF RNC
when DRA_DCCC_ SWITCH When theis set to ON; value of For BE "NODET" in service,DRA_ "ADD HSDPA_STA ADJNODE" is TE_TRANS_ set to IUR, SWITCH IUCS, or and DRA_HSUPA NNI_AAL2SW None or the Read & Write _STATE_TRA ITCH, NS_SWITCH value of are valid "NODET" in when "ADD DRA_PS_BE ADJNODE" is Read & Write None _STATE_TRA set to IUPS NS_SWITCH and is set to ON; "SGSNFLG" For RT in "ADD None service,DRA_ ADJNODE" is Read & Write HSDPA_STA set to YES, TE_TRANS_ this SWITCH and parameter is DRA_HSUPA Read & Write valid. _STATE_TRA NS_SWITCH are valid when None DRA_PS_NO Read & Write N_BE_STAT E_TRANS_S WITCH is set to ON; Read & Write If this parameter is None set through both the "ADD If this UCELLDRD" parameter is None andthrough set "SET UDRD" both the commands, "ADD the parameter UCELLDRD" set through None and "SET the "ADD UDRD" UCELLDRD" commands, command the parameter takes set through None precedence the "ADD over that set UCELLDRD" through the command "SET UDRD" takes command. precedence
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
-18
-18 Cell
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
-18
-18 Cell
None
5000 RNC
None
5000 RNC
2 Cell
2 RNC
over that set through the N (No impact "SET UDRD" on the UE in command. Read & Write idle mode) Not involved
None
NO
RNC
Valid when "BEQosPerfor N (No impact m" is set to on the UE in YES. Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (Impact on the UE in idle Read & Write mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
None
None
80
80 BSC6900
None
None
DR_RRC_DR D_SWITCH:O N,DR_RAB_SI 80 NG_DRD_SWI BSC6900 80 TCH:ON,DR_R AB_COMB_D RD_SWITCH: OFF RNC
None
None
None
RNC
6 RNC
None
6 RNC
None
None
RNC
None
None
RNC
N (No impact on the UE in Read & Write idle mode) Not involved
None
None
PPP link
None
Not involved
None
None
MP link
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
ON
RNC
None
48
48 SCTP link
None
Not involved
None
None
BSC6900
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
BSC6900
None
None
None
Not involved
NO
None
BSC6900
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
None
IP route
None
Not involved
None
None
IP route
None
Not involved
None
None
E1/T1 port
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
E1/T1 port
None
None
RNC
None This parameter is valid when "Dtxvalid" is set to ON. This parameter is valid when "Dtxvalid" is set to ON.
None
None
RNC
None
None
RNC
None
None
RNC
None
None
RNC
None
20 RNC
N (No impact on the UE in This paramter None only Read & Write idle mode) Not involved is valid when "DynCellShut N (No impact DownSwitch" on the UE in This paramter is set toonly Read & Write idle mode) ON. Not involved is valid when "DynCellShut N (No impact DownSwitch" on the UE in is set to ON. Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
180 RNC
None
OFF
RNC
None
None
None
Cell
This paramter is valid only when None "DynShutdow Read & Write nSwitch" is set to ON_1 or ON_2 or ON_3. Read & Write
None
None
BSC6900
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
None
None
30 RNC
None
None
4 RNC
None
None
8 RNC
None
None
2 RNC
1 Cell
None
None
IP path
None
500 RNC
None
100 RNC
30000
30000 RNC
When None the value of "PATHCHK" in "ADD IPPATH" is If this None set to parameter is If this ENABLED, set throughis parameter this the "SET both set throughis parameter UFRC" and both the "SET valid. "ADD UFRCCHLTY UCELLFRC" PEPARA" commands, and "ADD the parameter UCELLFRC" set through None commands, the "ADD the parameter UCELLFRC" set through command the "ADD takes UCELLFRC" None precedence command over that set takes through the precedence "SETthat set over UFRC" command. through the
30000
30000 Cell
"SET UFRCCHLTY N (No impact PEPARA" on the UE in command. Read & Write idle mode) Not involved
None
3000 RNC
None
5000 RNC
41
41 RNC
41
41 Cell
set through both the "SET UFRCCHLTY If this PEPARA" is parameter andthrough set "ADD UCELLFRC" both the "SET commands, UFRCCHLTY the parameter PEPARA" set through and "ADD the "ADD UCELLFRC" UCELLFRC" None commands, command the parameter takes set through precedence the "ADD over that set UCELLFRC" None the through command "SET takes UFRCCHLTY precedence PEPARA" over that set command. through the "SET UFRCCHLTY PEPARA" command.
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
2147483646
2147483646 BSC6900
None
None
None
BSC6900
None
None
None
BSC6900
None
None
BSC6900
None
None
BSC6900
336
336 RAB
None
None
RAB
None
None
RAB
This parameter is associated None Read & Write with the setting of the This "EdchMacdPd parameter is uSizeNum" associated parameter. It Read & Write None with the is required setting of the when the "EdchMacdPd "EdchMacdPd uSizeNum" This uSizeNum" It parameter.is Read & Write None parameter is required associated set to the when a value with the within the "EdchMacdPd setting of the range of D1 to uSizeNum" "EdchMacdPd Read & Write D12. parameter is uSizeNum" set to a value parameter. It within the is required range theD10 when of to D12. "EdchMacdPd Read & Write uSizeNum" parameter is set to D11 or D12. Read & Write
None
None
RAB
None
None
RAB
None
None
RAB
None
None
RAB
None
None
RAB
None
None
RAB
None
None
RAB
None
None
RAB
None
None
RAB
D1
D1
RAB
with the associated setting of the with the "EdchMacdPd setting of the This uSizeNum" "EdchMacdPd parameter It parameter.is uSizeNum" associated is required It parameter. with the when the is required setting of the "EdchMacdPd This the when "EdchMacdPd uSizeNum"is parameter "EdchMacdPd uSizeNum" parameter is associated uSizeNum" It parameter. set to D12.is Read & Write with the parameter is required setting of set to the the This when a value "EdchMacdPd within the is parameter "EdchMacdPd uSizeNum" to range of D2 associated uSizeNum" It parameter. D12.the is Read & Write with parameter is required setting of set to the the This a value when "EdchMacdPd within the is parameter "EdchMacdPd uSizeNum" range of D3 to associated uSizeNum" It parameter. D12.the is Read & Write with parameter is required setting of set to the the This when a value "EdchMacdPd within the is parameter "EdchMacdPd uSizeNum" range of D4 to associated uSizeNum" It parameter. D12.the is Read & Write with parameter is required setting of set to the the This a value when "EdchMacdPd within the is parameter "EdchMacdPd uSizeNum" range of D5 to associated uSizeNum" It parameter. D12.the is Read & Write with parameter is required setting of the set to the This when a value "EdchMacdPd within the is parameter "EdchMacdPd uSizeNum" range of D6 to associated uSizeNum" It parameter. D12.the is Read & Write with parameter This is required setting of is set to the the parameter when a value "EdchMacdPd within the required when "EdchMacdPd uSizeNum" to range of D7 the uSizeNum" It parameter. D12. "TrchType"is Read & Write parameter is required is parameter set to the when a value set to within the "EdchMacdPd TRCH_EDCH range of D8 to uSizeNum" _2MS D12. or is Read & Write parameter TRCH_EDCH set to a but _10MS value within the not required range theD9 to when of D12. Read & Write "TrchType" parameter is set to TRCH_HSDS CH. Read & Write
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
16
16 RAB
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
16
16 RAB
None
None
PS: not selected RATE_2048KB PS: not selected RATE_2880KB PS: not selected RATE_5740KB PS: not selected RNC
None
None
RAB
None
None
RAB
None
None
RAB
This parameter is required when 1. the EdchTargetLa "TrchType" rgeRetransNu parameter is m <= None Read & Write set to MaxEdchRetr 1. TRCH_EDCH ansNum. EdchTargetLit _2MS or 2. tleRetransNu TRCH_EDCH EdchTargetLa m <= _10MS. rgeRetransNu Read & Write MaxEdchRetr m> ansNum. EdchTargetLit 2. tleRetransNu EdchTargetLit m. tleRetransNu Read & Write m< EdchTargetLa rgeRetransNu m Read & Write
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
2 RAB
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
2 RAB
None
None
None
RNC
None
20
20 BSC6900
None
10
10 Cell
None
None
None
Cell
None
None
None
RNC
None
None
FALSE RNC
None
None
None
BSC6900
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
ON
RNC
None
OFF
OFF
MTP3 link
None
None
OFF
RNC
None
None
ERR_PFM_1E 5 Board
None
None
None
BSC6900
None
None
None
BSC6900
None
AUTO
AUTO
BSC6900
None This paramter is valid only when None "DynShutdow nSwitch" is set to ON_1 or ON_2 or ON_3; None The value of this parameter must fulfill the None following condition: "StartTime1" < "EndTime1".
None
None
BSC6900
None
UEA0-1; UEA1-1
RNC
None
None
BSC6900
None
None
Cell
None
None
Cell
set to ON_2 This paramter or valid only is ON_3; The value of when this "DynShutdow parameter nSwitch" is must fulfill the set to ON_3; following of The value condition: this "StartTime2" N (No impact parameter < on the UE in must fulfill the "EndTime2". Read & Write idle mode) Not involved following condition: "StartTime3" N (No impact < on the UE in "EndTime3". Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
Cell
None
None
BSC6900
None
ENABLED
ENABLED
BSC6900
None
None
None
SCCP
None
None
SCCP
None Negotiation Read & Write Not involved with the peer network element is required. Read & Write Not involved
Not involved
Not involved
None
None
BSC6900
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
1 Cell
None
O5E4_R1E4
O5E4_R1E4
Board
None
OFF
OFF
Board
None
2147483646
2147483646 BSC6900
None
5000
None
7000
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
None
BSC6900
None
None
None
BSC6900
None
None
None
BSC6900
None
None
ONE_BY_ONE BSC6900
None
None
None
BSC6900
None
None
None
BSC6900
None
None
None
BSC6900
None
None
None
BSC6900
None
None
None
BSC6900
None
None
BSC6900
D1024
D1024
RAB
None The value of this parameter must be None than Read & Write larger the value of the "Event4bThd" parameter. Read & Write
None
None
RAB
50
50 RAB
160
160 RAB
80
80 RAB
None
None
BSC6900
None
None
BSC6900
0.02 None
None
0 None
None
CURRENT
None
None
100 None
None
0 None
None
0.02 None
None
The value of this This parameter is parameter must be when required smaller than the "RlcMode" the value of parameter is This the to AM and set parameter is "Event4aThd" the required when Read & Write parameter. "AmRlcCfgPa the "RlcMode" ra" parameter parameter is This to is "Sensor and If set AM set to parameter is FLOWCONT Type of the required when ROL_PARA. Read & Write External "AmRlcCfgPa the "RlcMode" Analog 1" is ra" parameter parameter is set to to is "Sensor and If set set to AM VOLTAGE, FLOWCONT Type of the unit of the ROL_PARA. Read & Write External "AmRlcCfgPa "Upper Limit Analog 1" is ra"Signal of parameter set to to is set of Output VOLTAGE, FLOWCONT Externalof the unit ROL_PARA. Read & Write Analog Limit If "Sensor "Lower 1" is V; Signal Type of of if "Sensor Type ofof External Output External is Analog 1" External Analog 1" is Read & Write None 1" is set to Analog If "Sensor setifto VOLTAGE, V; "Sensor Type of CURRENT, the unit Type of of Externalof the unit Limit "Upper 1" External is Analog Limit "Upper 1" is of to Analog None Read & Write set of Signal Measurement set to VOLTAGE, Output of Range of CURRENT, the unit of Externalof If "Sensor External the unit Limit "Lower 1" is Analog Limit Type of 1" is Analog "Lower of A. if "Sensor Read & Write External V; Signal of Measurement Analog of Type ofof is Output 2" Range set to External External VOLTAGE, Analog 1" is Analog 1" is the to of set "Sensor Read & Write A. ifunit V; "Upper Limit CURRENT, Type of of Signal the unit of External Output Limit "Upper of is Analog 1" External of to set None 2" is Read & Write Analog Measurement CURRENT, V; if "Sensor Range of the unit of Type of External "Lower Limit External Analog 1" is of Analog 2" is Read & Write A. Measurement set to Range of CURRENT, Externalof the unit Analog Limit "Upper 1" is A. Signal Read & Write of Output of External Analog 2" is A. Read & Write
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
0 None
None
CURRENT
None
None
100 None
None
0 None
None
0.02 None
None
0 None
None
CURRENT
None
None
100 None
None
0 None
None
0.02 None
None
0 None
None
"Upper Limit External is Analog 2" of to 2" is Analog set Measurement set to VOLTAGE, Range of CURRENT, the unit of If "Sensor Externalof the unit Limit "Lower Type of Limit Analog "Lower 2" is of External V; Signal of if "Sensor Measurement Analog of Type ofof is Output 3" Range set to External If "Sensor External VOLTAGE, Analog 2" is Type of Analog 2" is the to of set "Sensor A. ifunit External V; "Upper Limit CURRENT, Analog 3" is Type of of Signal the to of set unit External Output Limit "Upper of is VOLTAGE, Analog 2" External of to of the set unit None 3" is Analog Limit Measurement If "Sensor "Lower CURRENT, V; Signal "Sensor Range of Type of of ifunit of the of Type of External External Output "Lower Limit External is Analog 2" is Analog 3" External of Analog 3" is A. to 3" is set Analog Measurement If "Sensor setifto VOLTAGE, V; "Sensor Range of Type of CURRENT, the unit Type of of Externalof External the unit Limit "Upper 2" is External is Analog Limit Analog 3" "Upper 3" is of to Analog A. Signal set of to Measurement set VOLTAGE, Output of Range of CURRENT, the unit of Externalof If "Sensor External the unit Limit "Lower 3" is Analog Limit Type of 3" is Analog "Lower of A. Signal External V; of if "Sensor Measurement Analog of Type ofof is Output 4" Range set to External If "Sensor External VOLTAGE, Analog 3" is Type of Analog 3" is the to of set "Sensor A. ifunit External V; "Upper Limit CURRENT, Analog 4" is Type of of Signal the to of set unit External Output Limit "Upper of is VOLTAGE, Analog 3" External of to of the set unit 4" is None Analog Limit Measurement "Lower CURRENT, V; Signal "Sensor Range of of ifunit of the of Type of External Output Limit "Lower External Analog 3" is External of Analog 4" is A. Analog 4" is Measurement setifto V; "Sensor Range of CURRENT, Type of Externalof the unit External is Analog Limit "Upper 3" is Analog 4" A. Signal of to set Output of CURRENT, Externalof the unit Analog Limit "Lower 4" is A. Signal of Output of External Analog 4" is A.
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
CURRENT
None
None
None
100 None
None
Analog 4" is Analog 4" is setifto V; "Sensor CURRENT, Type of the unit of External "Upper Limit Analog 4" is of to set Measurement CURRENT, Range of the unit of External N (No impact "Lower Limit Analog 4" is on the UE in of A. Read & Write idle mode) Not involved Measurement Range of External Analog 4" is A. N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved
0 None
None
None
D16000
RNC
None
None
D5000
RNC
None
None
Physical channel
None
None
Cell
10
10 Cell
None
None
RNC
None
-30 RNC
REQUIRE
REQUIRE
Cell
This parameter is consistent None Read & Write with "TrchId" in "ADD UFACH", This "ADD None parameter is Read & Write UFACHDYNT required when FS", and the "ADD "InterFreqInte UFACHLOCH rRatMeasInd" Read & Write ". parameter is set to INTER_FREQ , INTER_RAT None Read & Write or INTER_FREQ _AND_INTER _RAT. This None Read & Write parameter is not required when the "InterFreqInte None rRatMeasInd" Read & Write parameter is set to NOT_REQUI RE. Read & Write
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
0 Cell
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
RNC
None
None
None
BSC6900
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
4 RNC
None
None
None
BSC6900
None
None
None
BSC6900
None
None
None
BSC6900
None
None
None
BSC6900
None
None
None
None
None
None
None
None
None
None
None
None
1 IMA group
None
1 None
UNI link
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
None
Board
None
Not involved
None
None
Ethernet port This index None Read & Write can correspond with any threshold 0 PPP link None Read & Write (maximum value of 80) in the six queues. The following 0 MP group None Read & Write condition must be met: threshold x 64 ATM logical x 1024 x 1 port None port Read & Write logical bandwidth < 4294967295( 0xFFFFFFFF) 0 IP logical port . Read & Write
Not involved
Not involved
BSC6900
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
None
BSC6900
None
N (No impact on the UE in Read & Write idle mode) Not involved
Not involved
16bit
16bit
PPP link
None
PPP link
16bit
16bit
MP link
None
BSC6900
ON
None
None
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
None
Cell
None
None
Cell
N (No impact on the UE in This paramter None only Read & Write idle mode) Not involved is valid when "TxDiversityIn d" is set to TRUE. Read & Write Y Cell N (No impact on the UE in This paramter None only Read & Write idle mode) Not involved is valid when "TxDiversityIn d" is set to TRUE. Read & Write Y Cell N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
Cell
None
None
Cell
None
-30 RNC
None
None
-200 RNC
None
12
12 RNC
None
4 None
None
None
None
BSC6900
None
None
None
BSC6900
None
None
None
BSC6900
None
None
None
BSC6900
None
Not involved
csv
csv
BSC6900
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
D3
RNC
None
D3
D3
Cell
None
None
None
BSC6900
D32
D32
NodeB
This parameter is required when None Read & Write the "IsFixedMach sWinSize" parameter is set to TRUE. Read & Write
ON
ON
Cell
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
ON
ON
ON
ON
IMA group
None
ON
ON
UNI link
None
None
OFF
Board
None
Not involved
None
ON
N (No impact on the UE in Read & Write idle mode) Not involved
ON
ON
PPP link
None
BSC6900
ON
ON
MP group
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
ON
ON
None
ON
ON
ON
ON
Not involved
None
None
None
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
BSC6900
None
None
None
BSC6900
None
None
None
BSC6900
None
Not involved
None
none
BSC6900
None
Not involved
None
OFF
RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
2 None
None
256 None
MP group
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
None
BSC6900
None
Not involved
None
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
None
BSC6900
None
None
None
BSC6900
None
D128
D128
IMA group
None
TXT
TXT
None
None
The factor table index is configured by BSC6900 None the Read & Write setting value of "FTI" in "ADD FACTORTAB Adjacent node LE". Read & Write
None
None
BSC6900
None
Not involved
None
None
BSC6900
None
Not involved
None
None
BSC6900
None
Not involved
None
None
BSC6900
None
Not involved
None
None
BSC6900
None
Not involved
None
None
BSC6900
None
Not involved
0 BSC6900
None
Not involved
0 BSC6900
None
Not involved
20
20 BSC6900
None
Not involved
15
15 BSC6900
None
Not involved
0 BSC6900
None
Not involved
1 BSC6900
None
Not involved
0 BSC6900
None
Not involved
0 BSC6900
None
Not involved
5 BSC6900
None
Not involved
0 BSC6900
None
Not involved
None
None
Physical channel
Either "GainFactorB etaC" or "GainFactorB etaD" should Either be set to 15. Read & Write Not involved "GainFactorB etaC" or "GainFactorB etaD" should be set to 15. Read & Write Not involved
Not involved
15
Physical 15 channel
Not involved
DEG
DEG
None
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
DEG
Cell
None
70
70 BSC6900
None
70
70 BSC6900
None
None
BSC6900
N (No impact on the UE in The following Read & Write idle mode) None Not involved relationship must be N (No impact satisfied: on the UE in "GoldMaxMod The following Read & Write idle mode) None Not involved e" >= relationship "SilverMaxMo must be de" >= N (No impact satisfied: "CopperMaxM on the UE in "GoldMaxMod ode". Read & Write idle mode) Not involved e" >= "SilverMaxMo de" >= N (No impact "CopperMaxM on the UE in ode". Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
OFF
OFF
Cell
None
10
10 None
None
None
None
Not involved
None
None
Not involved
None
None
Cell
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
Cell
None
None
None
Not involved
95
95 Board
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
95
75 Board
None
85
85 Board
None
85
65 Board
None
ON
ON
Board
None
None
512 RNC
None
0 RNC
None
Mode0
Mode0
Cell
None
D50
None
None
None
None
5000(applicatio D50 is RAB n type NBAP), 1000(applicatio When the n type is interface type SCTP link M3UA) is Iub, transmission type is ATM, the parameter None BSC6900 is UBR; transimssion type is dual stack or IP, the 5 parameter is 5 Cell AF13; When the transimssion interface type type is dual is Iub,or Hybird stack 0 transmission 0 Cell IP, the type is ATM parameter isor IP, the LQAF13. parameter When the is interface 0 NULL; type 0 Cell transimssion is Iur, type is dual transmission stack, ATM, type isthe parameter is the parameter 100 UBR; 100 BSC6900 is UBR; transimssion Hybird type is IP, the IP, the parameter is parameter is BSC6900 AF13. AF13. When the interface type is Iur, 30 transmission 30 BSC6900 type is ATM or IP, the parameter is NULL. BSC6900
TRCH_EDCH _2MS or TRCH_EDCH _10MS but not required when the "TrchType" parameter is set to N (No impact TRCH_HSDS on the UE in CH. Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None Read & Write This parameter is required when the "UseOfHcs" Read & Write None This paramter parameter is is valid only set to USED when but not "UseOfHcs" is required when set to TRUE. Read & Write the "UseOfHcs" parameter is set to NOT_USED. Read & Write When the value of "ITFT" in "ADD None TRMMAP" is Read & Write set to IUB or IUR, this parameter is valid. Read & Write When the value of "ITFT" in "ADD None TRMMAP" is Read & Write set to IUB or IUR, this parameter is valid. Read & Write
Not involved
Not involved
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
100
100 BSC6900
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
70
70 BSC6900
None
None
None
None
None
None
None
None
parameter When the is NULL; type interface transimssion is Iur, type is dual transmission stack, ATM, type isthe parameter is the parameter AF43; is RT_VBR; transimssion Hybird type is IP, the IP, the parameter is parameter is BSC6900 AF43. LQAF43. When the interface type When the is Iur, 100 interface type BSC6900 100 transmission is Iub, type is ATM or transmission IP, the ATM, type is parameter is the parameter NULL. BSC6900 is UBR; transimssion When the type is dual interface type Whenor IP, the stack the is Iub, parameter is 0 interface type 0 BSC6900 transmission is Iub, AF13; ATM or type is transmission transimssion IP, the ATM, type is dual parameter is the parameter stack or Hybird 30 NULL; 30 BSC6900 is UBR; IP, the transimssion transimssion parameter is When the type is dual type is dual LQAF13. type interface stack,or IP, the When the stack the When the is is Iub, type parameter interface type interface 100 100 parameter is BSC6900 transmission UBR; is Iub, AF13; ATM or is Iur, type is transimssion transmission transimssion transmission IP, the ATM, type is dual type is Hybird type is ATM, parameter is IP, the Hybird the parameter stack or the parameter NULL; 100 parameter is BSC6900 100 is UBR; IP, the is UBR; transimssion AF13. transimssion parameter is transimssion type isthe When dual type is IP, dual LQAF13. the type isthetype stack,or IP, the interface stack the is When parameter is parameter is is Iur, parameter interface AF13. type BSC6900 UBR; transmission AF13; is Iur, transimssion type is ATM or transimssion transmission type is Hybird IP, the ATM, type is dual IP, the Hybird parameter is stack or the parameter parameter is BSC6900 NULL. IP, the is UBR; AF13. parameter is transimssion When the LQAF13. type is IP, the interface type When the parameter is is Iur, interface type BSC6900 AF13. transmission is Iur, type is ATM or transmission IP, the ATM, type is parameter is the parameter NULL. BSC6900 is UBR; transimssion type is IP, the parameter is AF13. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR, this parameter is valid. Read & Write When the value of "ITFT" in "ADD None TRMMAP" is Read & Write set to IUB or IUR, this parameter is valid. Read & Write
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None When the value of "ITFT" in "ADD None TRMMAP" is When the set to of or value IUB IUR, this "ITFT" in parameter is "ADD valid. TRMMAP" is When the set to of or value IUB IUR, this "ITFT" in parameter is "ADD valid. TRMMAP" is When the set to of or value IUB IUR, this "ITFT" in parameter is "ADD valid. TRMMAP" is When the set to of or value IUB IUR, this "ITFT" in parameter is "ADD valid. TRMMAP" is set to IUB or IUR, this parameter is valid.
None
IP, the parameter is AF13. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR, this N (No impact parameter is on the UE in valid. Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
None
None
When the 30 interface type BSC6900 30 is Iub, transmission type is ATM or 100 dual stack, the BSC6900 100 parameter is When the RT_VBR; interface type transimssion is Iub, type is IP or 30 Hybird IP, the BSC6900 transmission 30 type is ATM parameter isor IP, the EF. parameter is When the NULL; 100 interface type BSC6900 100 transimssion is Iur, type is dual transmission stack, the type is ATM, parameter is the parameter 15 is RT_VBR; 15 BSC6900 EF; transimssion Hybird type is IP, the IP, thethe is parameter When parameter is BSC6900 EF. interface type LQEF. is Iub, When the transmission interface type type is ATM or is Iur, 100 dual stack, the BSC6900 100 transmission parameter is type is ATM or RT_VBR; IP, the transimssion parameteror type is IP is NULL. IP, the BSC6900 Hybird parameter is EF. When the 0 interface type 0 BSC6900 is Iur, transmission type is ATM, the parameter 50 is RT_VBR; 50 BSC6900 transimssion type is IP, the parameter is EF. BSC6900
None
None
None
None When the value of "ITFT" in "ADD None TRMMAP" is set to IUB or IUR, this parameter is valid. When the value of "ITFT" in "ADD None TRMMAP" is set to IUB or IUR, this parameter is valid.
None When the value of "ITFT" in "ADD None TRMMAP" is Read & Write set to IUB or IUR, this parameter is valid. Read & Write
None
None
None
None
None
parameter is EF; transimssion type is Hybird IP, thethe When parameter is interface type LQEF. is Iub, When the transmission interface type type is ATM or is Iur, 100 dual stack, the BSC6900 100 transmission parameter is type isthe or When ATM RT_VBR; IP, the type interface transimssion parameteror is Iub, IP is type is NULL. IP, the BSC6900 transmission Hybird type is ATM parameter isor IP, the AF43. parameter is When the interface 0 NULL; type 0 BSC6900 transimssion is Iur, type is dual transmission stack, ATM, type isthe parameter is the parameter 100 AF43; is RT_VBR;100 BSC6900 transimssion Hybird type is IP, the IP, thethe parameter is When parameter is BSC6900 AF43. type interface LQAF43. is Iub, the When the When transmission interface type interface type type is ATM or is Iub, is Iur, 100 dual stack, the BSC6900 100 transmission transmission parameter isor type is ATM or type is ATM RT_VBR; IP, the IP, the transimssion parameter is parameteror type is IP is NULL; NULL. IP, the BSC6900 Hybird transimssion parameter is type is dual AF43. the stack, When the is parameter 0 interface type 0 BSC6900 AF43; is Iur, transimssion transmission type is Hybird type is ATM, IP, the the parameter 70 parameter is 70 Adjacent node is RT_VBR; LQAF43. transimssion When the type is IP, the interface type parameter is is Iur, AF43. transmission BSC6900 type is ATM or IP, the parameter is NULL. BSC6900
When the value of "ITFT" in "ADD None TRMMAP" is Read & Write set to IUB or IUR, this parameter is valid. Read & Write
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None When the value of "ITFT" in "ADD None TRMMAP" is set to IUB or IUR, this parameter is valid. When the value of "ITFT" in "ADD None TRMMAP" is set to IUB or IUR, this parameter is valid.
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None When the value of "ITFT" in "ADD None TRMMAP" is Read & Write When the set to of or value IUB IUR, this "ITFT" in parameter is "ADD valid. TRMMAP" is Read & Write
set to IUB or IUR, this N (No impact parameter is on the UE in valid. Read & Write idle mode) Not involved
None
None
BSC6900
None
Not involved
None
None
None
None
None
None
None
None
SingleHost
None
:OFF, HO_INTER_R AT_PS_3G2G _RELOCATIO N_SWITCH:O FF, HO_INTER_R AT_PS_OUT_ SWITCH:ON, HO_INTER_R None AT_RNC_SER RNC VICE_HO_SW ITCH:OFF, HO_INTRA_F REQ_DETSET RNC None _INTO_ACTS ET_SWITCH:O N, HO_INTRA_F None BSC6900 REQ_DETSET _RPRT_SWIT CH:ON, HO_INTRA_F 5000 REQ_HARD_H RNC O_SWITCH:O N, HO_INTRA_F REQ_RPRT_1 RNC 5000 J_SWITCH:OF F, HO_INTRA_F REQ_RPRT_6 2 F6G_SWITCH: Cell 2 OFF, HO_INTRA_F REQ_SOFT_H O_SWITCH:O RNC 5000 N, HO_MC_MEA S_BEYOND_U E_CAP_SWIT CH:OFF, 5000 RNC HO_MC_NCEL L_COMBINE_ SWITCH:ON, HO_MC_SIGN RNC 5000 AL_IUR_INTR A_SWITCH:OF F, HO_MC_SIGN SingleHost AL_SWITCH:O NodeB FF, HO_MC_SNA_ RESTRICTION _SWITCH:OFF RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
Not involved
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
None
None
None
None
None
-16
-16 Cell
None
-92
-92 Cell
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
5000 RNC
None
None
None
BSC6900
None
100 RNC
This parameter is valid only None Read & Write when "AFSetObj" is set to GOLD, SILVER, or COPPER. Read & Write
Not involved
Not involved
30
30 Cell
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
TRUE RNC
None
50 RNC
This parameter is valid only None Read & Write when "AFSetObj" is This set to GOLD, parameter is SILVER, or valid only COPPER. Read & Write when
None
100 RNC
"AFSetObj" is set to GOLD, N (No impact SILVER, or on the UE in COPPER. Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
5 RNC
None
None
5 RNC
None
None
100 RNC
None
None
60 RNC
None
None
100 RNC
This parameter is valid only when "AFSetObj" is set to GOLD, N (No impact SILVER, or on the UE in COPPER. Read & Write idle mode) Not involved This parameter is associated None Read & Write with the setting of the This paramter "HsdschMacd parameter is is valid only PduSizeNum" associated when parameter. It Read & Write None with the "DynShutDow is required setting is set nType" of the This when the "HsdschMacd to parameter is "HsdschMacd PduSizeNum" ConditionalSh associated PduSizeNum" parameter. It utDown. is Read & Write with the parameter is required setting of set to the the This a value when "HsdschMacd within the is parameter "HsdschMacd PduSizeNum" range of D1 to associated PduSizeNum" parameter. It Read & Write D8. the is with parameter is required setting of the set to the This when a value "HsdschMacd within the is parameter "HsdschMacd PduSizeNum" range of D2 to associated PduSizeNum" parameter. It D8. the is Read & Write with parameter is required setting of set to the the This when a value "HsdschMacd within the is parameter "HsdschMacd PduSizeNum" range of D3 to associated PduSizeNum" parameter. It Read & Write D8. the is with parameter is required setting of the set to the when a value "HsdschMacd within the "HsdschMacd PduSizeNum" range of D4 to This PduSizeNum" parameter. It Read & Write D8. parameter is is required associated set to the when a value with the within the "HsdschMacd settingof D5 to range of the PduSizeNum" "HsdschMacd Read & Write D8. This parameter is PduSizeNum" parameter is set to a value parameter. It associated within the is required with the range theD6 to when of the setting of D8. "HsdschMacd Read & Write "HsdschMacd PduSizeNum" PduSizeNum" parameter is parameter. It set to D7 or is required D8. the Read & Write when "HsdschMacd PduSizeNum" parameter is set to D8. Read & Write N (No impact on the UE in idle mode) Not involved
70
70 Cell
None
None
BSC6900
Not involved
Not involved
0 Cell
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
336
336 RAB
None
None
RAB
None
None
RAB
None
None
RAB
None
None
RAB
None
None
RAB
None
None
RAB
None
None
RAB
D1
D1
RAB
TRCH_HSDS CH but not required when the "TrchType" parameter is set to TRCH_EDCH _2MS or N (No impact TRCH_EDCH on the UE in _10MS. Read & Write idle mode) Not involved
None
None
BSC6900
None
Not involved
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
MIMO
MIMO
RNC
None
None
None
Cell
None
0 Cell
None This parameter is None when listed the value of "TbNum" is This D1, D2, D3, parameter is or D4.when listed the value of "TbNum" is D2, D3, or This D4. parameter is listed when the value of "TbNum" is This D3 or D4. is parameter
None
0 RNC
None
None
RNC
None
None
RNC
None
None
RNC
None
None
RNC
listed when the value of N (No impact "TbNum" is on the UE in This paramter D4. Read & Write idle mode) Not involved is valid only when "AllocCodeMo N (No impact de" is set to on the UE in Manual. Read & Write idle mode) Not involved
5 Cell
5 Cell
Automatic is valid only and the value when of this "AllocCodeMo parameter de" is set to must satisfy Automatic the following and the value relationship: of this "HsPdschMax parameter CodeNum" >= N (No impact must satisfy "HsPdschMin on the UE in the following CodeNum". Read & Write idle mode) Not involved relationship: "HsPdschMax CodeNum" >= N (No impact "HsPdschMin on the UE in CodeNum". Read & Write idle mode) Not involved N (No impact on the UE in This paramter None only Read & Write idle mode) Not involved is valid when "TxDiversityIn N (No impact d" is paramter set to on the UE in This TRUE. only Read & Write idle mode) Not involved is valid when "TxDiversityIn d" is set to TRUE. Read & Write Y
1 Cell
2.5dB
2.5dB
Cell
None
None
Cell
None
None
Cell
Cell
None
None
BSC6900
None
Not involved
4 Cell
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
D100
D100
RNC
None
D50
D50
RNC
None
D100
D100
RNC
D50
D50
RNC
None
100 RNC
None This parameter is valid only when None "AFSetObj" is Read & Write set to GOLD,SILVE R, or COPPER. Read & Write
None
D5760
RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
MBR
MBR
NodeB
None
None
BasedOnUEC ap RNC
None
None
100
100 Cell
100
100 Cell
D256
D256
RNC
This This parameter is parameter valid only None used Read & Write can be when for selectionis "AFSetObj" of the GOLD, set to initial rate for SILVER, or HSUPA BE COPPER. Read & Write services only when the DCCC_SWIT CH under the None Read & Write "Chswitch" parameter and the HSUPA_DCC C_SWITCH Read & Write None under the "HspaSwitch" parameter are set to on None the Read & Write through "SET This CORRMALG parameter is OSWITCH" valid only command. Read & Write when
None
100 RNC
"AFSetObj" is set to GOLD, N (No impact SILVER, or on the UE in COPPER. Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
100
100 Cell
None
None
5 RNC
None
None
100 RNC
None
None
None
None
None
None
None
When the interface type RNC 60 is Iub, transmission type is ATM, the parameter 100 RNC is UBR; transimssion type is dual stack or IP, the parameter is BSC6900 None AF13; When the transimssion interface type type is dual is Iub, stack or Hybird 50 IP, the transmission 50 Cell type is ATM parameter isor IP, the LQAF13. parameter is When the NULL; 70 interface type Cell 70 transimssion is Iur, type is dual transmission stack, the type is ATM, parameter is the parameter 0 is UBR; 0 Cell UBR; transimssion Hybird type is IP, the IP, thethe is parameter When parameter is BSC6900 AF13. type interface AF13. is Iub, When the transmission interface type type is ATM or is Iur, 30 dual stack, the BSC6900 transmission 30 parameter is type is ATM or RT_VBR; IP, the transimssion parameteror type is IP is NULL. IP, the BSC6900 Hybird parameter is AF43. When the 100 interface type BSC6900 100 is Iur, transmission type is ATM, the parameter 100 is RT_VBR;100 BSC6900 transimssion type is IP, the parameter is AF43. BSC6900
This parameter is valid only None when "AFSetObj" is set to GOLD, The value of SILVER, or this COPPER. parameter must satisfy the following The value of relationship: this None "HsupAuRetr parameter nsLdTrigThd" must satisfy >= following the "HsupAuRetr relationship: nsLdRelThd" "HsupAuRetr nsLdTrigThd" This paramter >=valid only is "HsupAuRetr when nsLdRelThd" "DynShutDow When the nType" is set value of to "ITFT" in ConditionalSh "ADD utDown. is TRMMAP" set to IUB or IUR, this parameter is valid. When the value of "ITFT" in "ADD None TRMMAP" is set to IUB or IUR, this parameter is valid.
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
Not involved
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None When the value of "ITFT" in "ADD None TRMMAP" is Read & Write set to IUB or IUR, this parameter is valid. Read & Write
None
None
None
None
None
None
parameter is AF43; transimssion type is Hybird IP, the parameter is LQAF43. When the interface type is Iur, 100 transmission BSC6900 100 type is ATM or IP, the When the is parameter interface type BSC6900 NULL. is Iub, transmission type is ATM, the parameter 0 is UBR; 0 BSC6900 transimssion When the type is dual interface type Whenor IP, the stack the is Iub, parameter is 70 70 interface type BSC6900 transmission is Iub, AF13; ATM or type is transmission transimssion IP, the ATM, type is dual parameter is the parameter stack or Hybird 30 NULL; 30 BSC6900 is UBR; IP, the transimssion transimssion parameter is When the type is dual type is dual LQAF13. type interface stack,or IP, the When the stack the When the is is Iub, type parameter interface type interface 100 100 parameter is BSC6900 transmission UBR; is Iub, AF13; ATM or is Iur, type is transimssion transmission transimssion transmission IP, the ATM, type is dual type is Hybird type is ATM, parameter is IP, the Hybird the parameter stack or the parameter NULL; 100 parameter is BSC6900 100 is UBR; IP, the is UBR; transimssion AF13. transimssion parameter is transimssion type isthe When dual type is IP, dual LQAF13. the type isthetype stack,or IP, the interface stack the is When parameter is parameter is is Iur, parameter interface AF13. type BSC6900 UBR; transmission AF13; is Iur, transimssion type is ATM or transimssion transmission type is Hybird IP, the ATM, type is dual IP, the Hybird parameter is stack or the parameter parameter is BSC6900 NULL. IP, the is UBR; AF13. parameter is transimssion When the LQAF13. type is IP, the interface type When the parameter is is Iur, interface type BSC6900 AF13. transmission is Iur, type is ATM or transmission IP, the ATM, type is parameter is the parameter NULL. BSC6900 is UBR; transimssion type is IP, the parameter is AF13. BSC6900
When the value of "ITFT" in "ADD None TRMMAP" is Read & Write set to IUB or IUR, this parameter is valid. Read & Write
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
None When the value of "ITFT" in "ADD None TRMMAP" is When the set to of or value IUB IUR, this "ITFT" in parameter is "ADD valid. TRMMAP" is When the set to of or value IUB IUR, this "ITFT" in parameter is "ADD valid. TRMMAP" is When the set to of or value IUB IUR, this "ITFT" in parameter is "ADD valid. TRMMAP" is When the set to of or value IUB IUR, this "ITFT" in parameter is "ADD valid. TRMMAP" is set to IUB or IUR, this parameter is valid.
None
IP, the parameter is AF13. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR, this N (No impact parameter is on the UE in valid. Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
30
30 BSC6900
None
100
100 BSC6900
None
OPEN
None
Board
None
None
None
None
When the 80 None interface type Board is Iub, transmission type is ATM or 10 dual stack, the Board None parameter is When the RT_VBR; interface type transimssion is Iub, IP or type is 30 Hybird IP, the BSC6900 transmission 30 type is ATM parameter isor IP, EF.the parameter is When the interface 100 100 NULL; type BSC6900 transimssion is Iur, type is dual transmission stack, ATM, type isthe parameter is the parameter None BSC6900 EF; is RT_VBR; transimssion Hybird type is IP, the IP, the parameter is parameter is BSC6900 EF. LQEF. When the interface type is Iur, 100 transmission BSC6900 100 type is ATM or IP, the parameter is NULL. BSC6900
None
None
None
None When the value of "ITFT" in "ADD None TRMMAP" is set to IUB or IUR, this parameter is valid. When the value of "ITFT" in "ADD None TRMMAP" is set to IUB or IUR, this parameter is valid.
Not involved
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
None
None
type is ATM or dual stack, the parameter is When the RT_VBR; interface type transimssion is Iub, IP or type is transmission Hybird IP, the type is ATM parameter isor IP, EF.the parameter When the is interface 0 NULL; type 0 BSC6900 transimssion is Iur, type is dual transmission stack, ATM, type isthe parameter is the parameter 15 EF; is RT_VBR; 15 BSC6900 transimssion Hybird type is IP, the IP, thethe parameter is When parameter is BSC6900 EF. interface type LQEF. is Iub, When the transmission interface type type is ATM or is Iur, 100 dual stack, the BSC6900 100 transmission parameter is type isthe or When ATM RT_VBR; IP, the type interface transimssion parameteror is Iub, IP is type is NULL. IP, the BSC6900 transmission Hybird type is ATM parameter isor IP, the AF43. parameter When the is interface 0 NULL; type 0 BSC6900 transimssion is Iur, type is dual transmission stack, ATM, type isthe parameter is the parameter 50 AF43; is RT_VBR; 50 BSC6900 transimssion Hybird type is IP, the IP, the parameter is parameter is BSC6900 AF43. LQAF43. When the interface type is Iur, 100 transmission BSC6900 100 type is ATM or IP, the parameter is NULL. BSC6900
None When the value of "ITFT" in "ADD None TRMMAP" is set to IUB or IUR, this parameter is valid. When the value of "ITFT" in "ADD None TRMMAP" is set to IUB or IUR, this parameter is valid.
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None When the value of "ITFT" in "ADD None TRMMAP" is set to IUB or IUR, this parameter is valid. When the value of "ITFT" in "ADD None TRMMAP" is set to IUB or IUR, this parameter is valid.
0 BSC6900
None
100
100 BSC6900
None
None
When the is parameter interface type AF43; is Iur, transimssion transmission type is Hybird type is ATM, IP, the the parameter parameter is is RT_VBR; LQAF43. transimssion When the type is IP, the interface type parameter is is Iur, AF43. transmission BSC6900 type is ATM or IP, the parameter is NULL. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is When the set to of or value IUB IUR, this N (No impact "ITFT" in parameter is on the UE in "ADD valid. Read & Write idle mode) Not involved TRMMAP" is set to IUB or IUR, this N (No impact parameter is on the UE in valid. Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
70
70 BSC6900
None
None
None
BSC6900
None
Not involved
None
None
BSC6900
None
Not involved
0 Cell
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
0 Cell
None
8 Cell
None
8 Cell
None
8 Cell
None
8 Cell
4 Cell
This parameter is valid when None "InterFreqRep Read & Write ortMode" is set to EVENT_TRIG GER. Read & Write
6 Cell
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
4 Cell
None
4 Cell
None
4 Cell
None
4 Cell
4 Cell
0 Cell
0 Cell
This parameter is valid when None "InterRatRepo Read & Write rtMode" is set to EVENT_TRIG GER. Read & Write This parameter is valid when "InterRatRepo None is set Read & Write rtMode" This to parameter is PERIODICAL valid when _REPORTIN "InterFreqRep G. Read & Write ortMode" is
0 Cell
set to PERIODICAL N (No impact _REPORTIN on the UE in G. Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
720
720 SCCP
90
90 SCCP
64
64 IP path
When the None value of "PATHCHK" in "ADD IPPATH" is None set to ENABLED, this parameter is valid.
None
None
BSC6900
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (Impact on the UE in idle mode) Not involved N (Impact on the UE in idle mode) Not involved
None
None
BSC6900
None
None
None
Cell
ALLOWED
ALLOWED
Cell
This parameter is Noneonly Read & Write valid when "IdleCellBarre d" is set to BARRED. Read & Write This parameter is valid only None Read & Write when "QualMeas" is set to CPICH_ECN O. Read & Write This
2 Cell
1 Cell
0 Cell
parameter is valid when N (Impact on "SIB11Ind" is the UE in idle set to TRUE. Read & Write mode) Not involved This parameter is valid when N (Impact on "SIB11Ind" is the UE in idle set to TRUE. Read & Write mode) Not involved N (Impact on the UE in idle Read & Write mode) Not involved N (Impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
0 Cell
4 Cell
None
5 Cell
D320
D320
Cell
This parameter is Noneonly Read & Write valid when "IdleCellBarre d" is set to BARRED. Read & Write
None
15000(UNI), 500(NNI)
SAAL link
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
30 RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
20000 RNC
None
None
None
None
None
None
None
IMA group
None
Not involved
None
None
IMA group
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
None
IMA link
None
Not involved
V1.1
V1.1
IMA group
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
OFF
OFF
RNC
None
DCH
DCH
RNC
32
32 Cell
This parameter None satisfy Read & Write must The the following parameter relationship: must be "IMSMBR" >= greater than "IMSGBR" Read & Write or equal to
None
None
RNC
"ImsiMin" in The "ADD parameter UIMSISNAMA must be less P". or equal Read & Write Not involved than to "ImsiMax" in "ADD UIMSISNAMA P". Read & Write Not involved
Not involved
None
None
RNC
Not involved
D32
D32
RNC
None
None
RNC
None
None
RNC
This parameter is required when the This "ImsBearEnh parameter ancedSwitch" must be less parameter is than or equal set to ON. Read & Write to This "ImsiRtMax" parameter in "ADD must be UIMSIIDNNS greater than CNIDMAP". Read & Write or equal to "ImsiRtMin" in "ADD This UIMSIIDNNS parameter CNIDMAP". Read & Write must satisfy
Not involved
Not involved
Not involved
Not involved
512
512 Cell
the following relationship: N (No impact "IMSMBR" >= on the UE in "IMSGBR" Read & Write idle mode) Not involved This parameter is valid when "Dtxvalid" is set to ON. This parameter is valid when "Dtxvalid" is set to ON. This parameter is valid when "Dtxvalid" is set to ON. When the value of None "SAALLNKT" is set to NNI, this parameter is valid. This parameter must satisfy the following None relationship: This "INTERACTM parameter BR" >= must satisfy "INTERACTG the following BR" relationship: N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
RNC
None
None
RNC
None
None
RNC
OPEN
None
Board
1500
None
UIA1-1
RNC
32
32 Cell
512
512 Cell
"INTERACTM BR" >= N (No impact "INTERACTG on the UE in BR" Read & Write idle mode) Not involved
None
CSAMR_INTE RFREQ:OFF, CSNONAMR_I NTERFREQ:O FF, PSR99_INTER FREQ:OFF, PSHSPA_INT ERFREQ:OFF Cell
This parameter is valid when "InterRatRepo rtMode" is set to N (No impact EVENT_TRIG on the UE in GER. Read & Write idle mode) Not involved The value of this None Read & Write parameter must be smaller than The value of "InterFreqCsT this hd2FEcN0". Read & Write parameter N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
-16
-16 Cell
D3
-14 For low -14 Cell speed(5km/h): Range is D4~D6, the -95 recommended Cell -95 value is D5; for middle speed(50km/h) :Range is -12 D3~D4, the -12 Cell recommended value is D4; for high -92 speed(120km/ Cell -92 h):Range is D2~D4, the recommended value is D2; 80 universal 80 Cell value:Range is D3~D6, the recommended value is D3. Cell
must be smaller than N (No impact The value of "InterFreqCsT on the UE in this hd2FRscp". Read & Write idle mode) Not involved parameter must be larger thanof N (No impact The value "InterFreqCsT on the UE in this hd2DEcN0". Read & Write idle mode) Not involved parameter must be This larger than is parameter This "InterFreqCsT valid when parameter is Read & Write hd2DRscp". "InterRatRepo valid when rtMode" is set the to OVERLAY_S This EVENT_TRIG WITCH is ON. parameter is Read & Write GER. The when valid OVERLAY_S the WITCH is in OVERLAY_S This "HoSwitch" in WITCH is ON. parameter is Read & Write "SET None The when valid CORRMALG OVERLAY_S the OSWITCH"; WITCH is in OVERLAY_S Also the value "HoSwitch" in WITCH is ON. of this "SET None Read & Write The parameter CORRMALG OVERLAY_S must be OSWITCH"; WITCH is in smaller than Also the value "HoSwitch" in "InterFreqHTh of this "SET d2FEcN0". Read & Write parameter CORRMALG must be OSWITCH". smaller than Also the value "InterFreqHTh of this d2FRscp". Read & Write parameter must be larger than "InterFreqHTh d2DEcN0". Read & Write N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
-14
-14 Cell
-95
-95 Cell
-12
-12 Cell
-92
-92 Cell
"HoSwitch" in "SET CORRMALG OSWITCH"; Also the value of this parameter must be larger than N (No impact "InterFreqHTh on the UE in d2DRscp". Read & Write idle mode) Not involved This parameter is valid when None "InterRatRepo Read & Write rtMode" is set to EVENT_TRIG GER. Read & Write N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
60
60 Cell
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
3 Cell
None
None
OFF
Subsystem
None
None
-16 RNC
-14
-14 Cell
The value of this parameter None be Read & Write must smaller than The value of "InterFreqR99 this PsThd2FEcN parameter 0". be Read & Write must
-95
-95 Cell
smaller than The value of "InterFreqR99 N (No impact this PsThd2FRscp on the UE in parameter ". Read & Write idle mode) Not involved must be larger thanof The value "InterFreqR99 N (No impact this PsThd2DEcN on the UE in parameter 0". be Read & Write idle mode) Not involved must larger than "InterFreqR99 N (No impact PsThd2DRsc on the UE in p". Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
-12
-12 Cell
-92
-92 Cell
None
This parameter is valid when None "InterRatRepo Read & Write rtMode" is set to EVENT_TRIG GER. Read & Write This parameter is valid when None "InterRatRepo Read & Write rtMode" is set to EVENT_TRIG GER. Read & Write
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (Impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
255
255 Cell
80
80 Cell
None
YES
RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
YES
RNC
None
This parameter is valid when None "InterRatRepo Read & Write rtMode" is set to value of The EVENT_TRIG this GER. Read & Write parameter
-14
-14 Cell
must be smaller than N (No impact The value of "InterRatCsTh on the UE in this d2FEcN0". Read & Write idle mode) Not involved parameter must be smaller than N (No impact The value of "InterRatCsTh on the UE in this d2FRscp". Read & Write idle mode) Not involved parameter must be larger thanof N (No impact The value "InterRatCsTh on the UE in this d2DEcN0". Read & Write idle mode) Not involved parameter must be This larger than is N (No impact parameter "InterRatCsTh on the UE in valid when d2DRscp". Read & Write idle mode) Not involved "InterRatRepo rtMode" is set to N (No impact EVENT_TRIG on the UE in GER. Read & Write idle mode) Not involved
-100
-100 Cell
-12
-12 Cell
-97
-97 Cell
80
80 Cell
D3
D3
Cell
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
16
16 Cell
None
YES
RNC
21
21 Cell
None
DRD
RNC
-15
-15 Cell
-110
-110 Cell
-13
-13 Cell
-107
-107 Cell
This parameter is Read & Write None valid when the OVERLAY_S This WITCH is ON. parameter is Read & Write None The when valid OVERLAY_S the WITCH is in OVERLAY_S This "HoSwitch" in WITCH is ON. parameter is Read & Write "SET None The when valid CORRMALG OVERLAY_S the OSWITCH"; WITCH is in OVERLAY_S Also the value This "HoSwitch" in WITCH of this is ON. parameter is Read & Write "SET None The when parameter valid CORRMALG OVERLAY_S must be the OSWITCH"; WITCH than smaller is in OVERLAY_S Also the value "HoSwitch" in "InterRatHTh WITCH is ON. of this "SET d2FEcN0". Read & Write The parameter CORRMALG OVERLAY_S must be OSWITCH"; WITCH is in smaller than Also the value "HoSwitch" in "InterRatHTh of this "SET d2FRscp". Read & Write parameter CORRMALG must be OSWITCH"; larger than Also the value "InterRatHTh of this d2DEcN0". Read & Write parameter must be larger than "InterRatHTh d2DRscp". Read & Write
60
60 Cell
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
3 Cell
None
None
OFF
Subsystem
None
21
21 Cell
21
21 Cell
D1000
D1000
Cell
None This parameter is valid when "InterRatRepo None is set Read & Write rtMode" to PERIODICAL _REPORTIN G. Read & Write
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
3 Cell
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
0 Cell
None
0 Cell
-15
-15 Cell
The value of this parameter None be Read & Write must smaller than The value of "InterRatR99 this PsThd2FEcN parameter 0". be Read & Write must
-110
-110 Cell
smaller than The value of "InterRatR99 N (No impact this PsThd2FRscp on the UE in parameter ". Read & Write idle mode) Not involved must be larger thanof The value "InterRatR99 N (No impact this PsThd2DEcN on the UE in parameter 0". be Read & Write idle mode) Not involved must larger than "InterRatR99 N (No impact PsThd2DRsc on the UE in p". Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
-13
-13 Cell
-107
-107 Cell
None
None
255
255 Cell
80
80 Cell
72
72 BSC6900
1 BSC6900
-24
-24 Cell
-115
-115 Cell
D3
D3
Cell
None
1800 RNC
This When parameter is "ChoiceRprtU valid when None nitForDlBasic Read & Write "InterRatRepo Meas" isis set rtMode" set to MIN,the to value of this EVENT_TRIG parameter GER. Read & Write must satisfy the following relationship: "IntraFreqLdb None PeriodTimerL Read & Write en" > 2 x 60 x "MinForDlBasi cMeas"; When None Read & Write "ChoiceRprtU nitForDlBasic Meas" is set to None TEN_MSEC,t Read & Write he value of this parameter must None satisfy Read & Write the following relationship: "IntraFreqLdb PeriodTimerL None 1000 > Read & Write en" x 2x "TenMsecFor DlBasicMeas" . Read & Write
N (Impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
Ethernet port
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
REQUIRE
REQUIRE
Cell
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
OFF
Subsystem
None
None
None
RNC
None
None
12 RNC
6 Cell
6 Cell
6 Cell
None
18 RNC
12
12 Cell
12
12 Cell
12
12 Cell
The value of this parameter must satisfy the following The value of relationship: this ("IntraRelThd parameter For1ACSNVP must satisfy " - "Hystfor1A" the following / 2) < relationship: Read & Write None The value of ("IntraRelThd ("IntraRelThd this For1BCSNVP For1ACSVP" parameter " "Hystfor1A" / - + satisfy must "Hystfor1B" / 2) <following the 2). ("IntraRelThd Read & Write relationship: For1BCSVP" ("IntraRelThd + For1APS" "Hystfor1B" / The value of "Hystfor1A" / 2).< Read & Write this 2) parameter ("IntraRelThd must satisfy For1BPS" + the following "Hystfor1B" / The value of relationship: Read & Write 2). this ("IntraRelThd parameter For1ACSNVP must satisfy " - "Hystfor1A" the following / 2) < relationship: Read & Write None The value of ("IntraRelThd ("IntraRelThd this For1BCSNVP For1ACSVP" parameter " "Hystfor1A" / - + satisfy must "Hystfor1B" / 2) <following the 2). ("IntraRelThd Read & Write relationship: For1BCSVP" ("IntraRelThd + For1APS" "Hystfor1B" / "Hystfor1A" / 2).< Read & Write 2) ("IntraRelThd For1BPS" + "Hystfor1B" / 2). Read & Write
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
60000 RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
30 None
BSC6900
None
None
None
BSC6900
None
None
None
BSC6900
None
None
None
IP path
one network segment; ("IPADDR","P EERIPADDR" ,"PEERMASK " in "ADD IPPATH") conflicts with other IPPATH whose type is IUPS. Read & Write Not involved
Not involved
None
None
IPoA PVC
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
None
BSC6900
None
Not involved
None
None
BSC6900
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
BSC6900
None
Not involved
None
None
Not involved
None
None
None
None
N (No impact on the UE in Read & Write idle mode) Not involved
UDP/IP_HC
UDP/IP_HC
PPP link
None
BSC6900
UDP/IP_HC
UDP/IP_HC
MP group
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
None
Not involved
None
None
Not involved
None
None
BSC6900
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
None
BSC6900
None
None
None
None
None
None
None
None
None
None
BSC6900
None
None
NodeB
The parameter None Read & Write should be configured when "TnlBearerTy None Read & Write pe" is modified from ATM to IP or dual stack ATM/IP. Read & Write
Not involved
Not involved
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
None
None
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
None
None
None
None
None
None
None
None
None
None
Not involved
FALSE
FALSE NodeB
YES
YES
None
None
None
None
When the None of value "NODET" in "ADD ADJNODE" is set to BSC6900 None IUB, Read & Write IUR, or IUCS, and the value of "TRANST" in "ADD IP Path None ADJNODE" is Read & Write set to ATM or ATM_IP, this parameter is Adjacent node valid. Read & Write
N (No impact on the UE in Read & Write idle mode) Not involved
Not involved
Not involved
Not involved
Not involved
None
None
None
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
None
BSC6900
None
Not involved
None
1 RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
1 NodeB
None
1 NodeB
None
None
300 RNC
None
70
70 Board
None
ON
ON
Board
None
None
300 RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
OFF
OFF
RNC
None
95
95 Board
None
95
75 Board
None
85
85 Board
None
85
65 Board
None
ON
ON
Board
None
None
TRUE RNC
None
60
60 Board
None
75
75 Board
None
50
50 Board
None
65
65 Board
None
ON
ON
Board
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
OFF
OFF
RNC
None
OFF
OFF
RNC
None
95
95 Board
None
95
75 Board
None
85
85 Board
None
85
65 Board
None
ON
ON
Board
None
IUCS_IUPS
IUCS_IUPS
RNC
None
Not involved
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
16byte
Board
None
BSC6900
None
SBS 155
Board
None
BSC6900
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
16byte
Board
None
BSC6900
None
SBS 155
Board
None
BSC6900
None
16byte
Board
None
BSC6900
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
16byte
Board
None
BSC6900
None
SBS 155
Board
None
BSC6900
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
16byte
Board
None
BSC6900
None
SBS 155
Board
None
BSC6900
None
16byte
Board
None
BSC6900
None
OFF
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
SPACE
Board
None
Optical port
None
None
None
BSC6900
2 PPP link
None
BSC6900
None
2000(UNI), 100(NNI)
SAAL link
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
D6
RNC
None
None
ON
RNC
None
None
None
RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
None
Not involved
None
None
None
None
Not involved
None
None
None
None
Not involved
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
25
If this 3 3 IP logical port parameter is None set through both the "ADD UCELLDRD" 8 8 IP logical port None and "SET UDRD" commands, the parameter set through None None BSC6900 None the "ADD UCELLDRD" command takes None 6 RNC None precedence over that set through the "SET UDRD" UserNumber UserNumber Cell command.
Not involved
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
UserNumber
UserNumber
RNC
35
35 Cell
35
35 RNC
100
100 Cell
100
100 RNC
10
10 RNC
10
10 RNC
OFF
OFF
Cell
OFF
OFF
RNC
OFF
OFF
Cell
OFF
OFF
RNC
"ADD command UCELLDRD" takes and "SET precedence UDRD" set over that commands, through the the parameter "SET UDRD" set through command; the "ADD This UCELLDRD" parameter is command valid only None the takes when precedence "LdbDRDSwit This that set over chDCH" is parameter through the parameter is valid only "SET ON. set to UDRD" when the command; "LdbDRDSwit This chDCH" is parameter parameter is valid only set to the when ON. "LdbDRDSwit This chHSDPA"is parameter If this parameter is valid only is parameter set to the when ON. set through This "LdbDRDSwit both the is parameter chHSDPA" "ADD valid only If this parameter is UCELLDRD" when the is parameter set to ON. andthrough "LdbDRDLoa set "SET UDRD" dRemainThd both This the commands, DCH" "ADD parameter is If this the parameter parameter is UCELLDRD" valid only is parameter set to the andthrough "SET when ON. set through the "ADD UDRD" "LdbDRDSwit both the UCELLDRD" commands, chHSDPA" "ADD command If this the parameter parameter is UCELLDRD" takes parameter set throughis andto ON. "SET precedence set "ADD the through UDRD" set over the both that UCELLDRD" commands, through the "ADD command the parameter "SET UDRD" UCELLDRD" takes set through command. and "SET precedence the "ADD UDRD" over that set UCELLDRD" commands, through the command the parameter "SET UDRD" takes set through command. precedence the "ADD over that set UCELLDRD" through the command "SET UDRD" takes command. precedence over that set This through the parameter is "SETonly valid UDRD" command. when the
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
30
30 RNC
"LdbDRDchoi ce" parameter N (No impact is set to on the UE in POWER. Read & Write idle mode) Not involved
None
NODEB_CRE DIT_LDR_SWI TCH:disabled. LCG_CREDIT _LDR_SWITC H:disabled. LC_CREDIT_L DR_SWITCH:d isabled. RNC
None
OFF
Cell
FALSE
FALSE Cell
13
13 Cell
None
IUBLDR
RNC
None
UULDR
RNC
None
10 RNC
None
CREDITLDR
RNC
None
CODELDR
RNC
None
None
BSC6900
relationship: "LdrPeriodTim erLen" > 2 x 60 x "MinForUlBasi cMeas"; "LdrPeriodTim erLen" > 2 x 60 x "MinForDlBasi cMeas"; None Read & Write When "ChoiceRprtU nitForUlBasic Meas" and None "ChoiceRprtU Read & Write nitForDlBasic Meas" are set to TEN_MSEC,t Read & Write None he value of this parameter must satisfy "LdrFirstPri"," None the following Read & Write LdrSecondPri relationship: ","LdrThirdPri" "LdrPeriodTim ,"LdrFourthPri erLen" x 1000 " must be set "LdrFirstPri"," >2x differently. LdrSecondPri Read & Write "TenMsecFor ","LdrThirdPri" UlBasicMeas" ,"LdrFourthPri ; " must be set "LdrPeriodTim differently. erLen" x 1000 Read & Write 1.The >2x parameter is "TenMsecFor used in DlBasicMeas" command "LdrFirstPri"," . "ADD LdrSecondPri Read & Write ADJMAP " as ","LdrThirdPri" loadeq table ,"LdrFourthPri index be " mustfor set "LdrFirstPri"," gold,silver,an Read & Write differently. LdrSecondPri d bronze ","LdrThirdPri" users. ,"LdrFourthPri 2.When " must be of TRANST set differently. is Read & Write ADJNODE dual stack or hybird EQ The load IP,loadeq can table index is be added. by Read & Write configured
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
Not involved
Not involved
None
None
setting the value of "LEI" N (No impact The load EQ in "ADD on the UE in table index is Adjacent node LOADEQ". by Read & Write idle mode) Not involved configured setting the value of "LEI" N (No impact in "ADD on the UE in Adjacent node LOADEQ". Read & Write idle mode) Not involved
None
None
None
None
The load EQ table index is configured by setting the value of "LEI" N (No impact in "ADD on the UE in Adjacent node LOADEQ". Read & Write idle mode) Not involved
None
None
SCCP
None
Not involved
None
None
BSC6900
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
BSC6900
None
None
ON
BSC6900
None
Not involved
Not involved
None
None
BSC6900
None
Not involved
None
None
None
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
None
None
IP
IP
Board
None
IP
IP
Board
None
90
90 None
None
70
70 None
None
None
BSC6900
None
D8
RNC
None
D64
RNC
None The low activity rate adjustment This paramter function is None only Read & Write is valid when invalid when "LittleRateThd "DlSFLimitCM " >= Ind" is set to "UlDcccRateT TRUE. Read & Write hd" and "LittleRateThd " >= "DlDcccRateT hd". Read & Write
N (No impact on the UE in Read & Write idle mode) Not involved
Not involved
Not involved
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
10 None
None
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
None
None
None
None
Board
None
BSC6900
None
Not involved
B1111
B1111
SCCP
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) BSC6900
B1111
B1111
SCCP
None
None
None
PVC
None
None
None
None
None
Not involved
OFF
None
RNC
This paramter is valid only when "MbscNcovHo On2GldInd" in "SET N (No impact UMBSCCRR on the UE in M" is set ON. Read & Write idle mode) Not involved
None
None
BSC6900
None
Not involved
None
None
MP group
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
None
BSC6900
None
Not involved
None
None
NodeB
None
Cell
None
None
BSC6900
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
None
SCTP link
None
SCTP link
None
None
SCTP link
ON
OFF
BSC6900
None
None
SCTP link
When None the Read & Write value of "MODE" in "ADD SCTPLNK" is None Client, Read & Write set to this parameter can be modified. Read & Write
SCTP link
SCTP link
None
None
BSC6900
None
Not involved
90
95 Board
None
N (No impact on the UE in Read & Write idle mode) Not involved
90
80 Board
None
None
SCTP link
This parameter determines whether "LOGPORTS None Read & Write N" and "LOGPORTN When the O" in "ADD value of SCTPLNK" "LOGPORTF are valid. LAG" in "ADD Read & Write
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
None
SCTP link
SCTPLNK" is When the set to of this value ON, parameter is "LOGPORTF valid. in "ADD Read & Write Y LAG" SCTPLNK" is set to ON, this parameter is valid. Read & Write Y
SCTP link
None
None
SCTP link
SCTP link
80
85 Board
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
80
70 Board
None
ON
ON
Board
None
None
None
BSC6900
None
None
None
None
None
Not involved
None
None
None
None
Not involved
None
ON
E1/T1 port
None
E1/T1 port
None
None
E1/T1 port
None
E1/T1 port
None
None
None
BSC6900
None
None
None
None
When None the Read & Write value of "CARRYFLA G" in "ADD IPPATH" is 1 IP logical port None IP Read & Write set to LGCPORT, this parameter is IP path valid. Read & Write None
Not involved
Not involved
IP path
None
None
BSC6900
None
Not involved
None
None
None
None
Not involved
None
None
None
None
None
None
IP logical port When the None Read & Write Not involved value of "CARRYFLA G" in "ADD IPPATH" is NodeB None IP Read & Write Not involved set to LGCPORT, this parameter is IP path valid. Read & Write Y
Not involved
Not involved
IP path
None
None
None
Not involved
90
90 Board
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
75
75 Board
None
80
80 Board
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
65
65 Board
None
None
None
BSC6900
None
Not involved
None
None
BSC6900
None
Not involved
None
INCLUDE
BSC6900
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
HORIZONTAL None
None
None
None
OPTLOG
None
BSC6900
None
None
OPTLOG
BSC6900
None
None
None
BSC6900
None
Not involved
None
None
BSC6900
None
Not involved
None
None
BSC6900
None
Not involved
2905
None
None
RNC
None This parameter is valid when "Dtxvalid" is set to ON. This parameter is valid when "Dtxvalid" is set to ON.
SCTP link
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
None
None
SAAL
None
None
MAP_HSUPA_ RNC None TTI_2MS_SWI TCH:OFF, MAP_INTER_ RAT_PS_IN_C None HANLE_LIMIT RNC _SWITCH:OFF , MAP_PS_BE_ ON_E_FACH_ RNC None SWITCH:OFF, MAP_PS_STR EAM_ON_E_F ACH_SWITCH None Board :OFF, MAP_PS_STR EAM_ON_HS DPA_SWITCH: OFF, SAAL NodeB MAP_PS_STR EAM_ON_HS UPA_SWITCH: OFF, None MAP_SRB_68 Ethernet port 00_WHEN_RA B_ON_HSDSC H_SWITCH:O FF RNC
None
None
When None "CARRYLNK Read & Write Not involved T" is SAALSCTP, this parameter is valid. Read & Write Not involved
Not involved
Not involved
None
Not involved
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
None
BSC6900
None
Not involved
None
None
PPP link
None
Not involved
None
None
MP group
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
None
Not involved
None
None
None
None
This paramter is valid only Ethernet port None Read & Write when "MaxAllowed UlTxPowerInd " is set to Cell TRUE. Read & Write
Not involved
Not involved
24
24 Cell
FALSE
FALSE Cell
None
None
Cell
None This parameter is valid when the None "CellLocCfgTy Read & Write This pe" is set to parameter is BOTH or valid when CELL_ANTE the NNA. "CellLocCfgTy Read & Write
N (Impact on the UE in idle Read & Write mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
None
Cell
pe" is set to BOTH or to N (No impact The value CELL_ANTE on the UE in be set should NNA. Read & Write idle mode) Not involved be larger than the value of "MAXPATHR N (No impact ETR" in "ADD on the UE in SCTPLNK". Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
1 Cell
None
1 Cell
None
None
None
RAB
None
None
None
RAB
None
None
None
None
The value of this parameter must satisfy the following The value of relationship: this "MaxCAPSLo parameter wLoad" > must IP logical port None satisfy Read & Write "MaxCAPSMi the following dLoad" > relationship: "SharingOutC "MaxCAPSLo APSMidLoad" wLoad" > 150 RNC . "MaxCAPSMi Read & Write
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
100 RNC
dLoad" > "SharingOutC N (No impact APSMidLoad" on the UE in . Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
4 SAAL link
None
3 Cell
D15
D15
Transport channel
None
49 RNC
None
3 RNC
None The value of this parameter must None not Read & Write larger than "MaxCellInAct iveSet" of This "SET parameter is Read & Write None UINTRAFRE required when QHO" or the "ADD "TrchType" UCELLINTRA parameter is FREQHO". Read & Write set to
Not involved
Not involved
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
None
RAB
TRCH_EDCH _2MS or N (No impact TRCH_EDCH on the UE in _10MS. Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
48
48 Cell
None
10
10 Cell
None
Not involved
1031
1031 None
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
16 RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
64
64 Cell
None
20
20 Cell
None
None
3 RNC
None
256
None
PPP link
None
None
MP group
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
None
BSC6900
None
1 NodeB
0 SAAL link
None
None
BSC6900
None
When the value of None "SAALLNKT" Read & Write is set to NNI, this parameter is valid. Read & Write The value to be set should be smaller than the value None Read & Write of "MAXASSOC RETR" in "ADD SCTPLNK". Read & Write
346
346 Cell
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
25(UNI), 500(NNI)
SAAL link
None
5 RNC
The value of this parameter must be set to meet the following conditions: None Read & Write 100 x "MaxQueueTi meLen" > "PollTimerLen ". Read & Write
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
64
64 PPP link
None
PPP link
None
None
MP group
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
75
75 Cell
None
12
12 None
None
16
16 None
None
Not involved
430
430 Cell
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
24
24 Cell
None
24
24 Cell
None
24
24 Cell
None
24
24 Cell
None
1 Cell
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
FALSE
FALSE Cell
None
0 Cell
None
None
None
None
None
Not involved
None
None
None
None
100 RNC
This parameter is valid only None Read & Write when "AFSetObj" is set to GOLD, SILVER, or COPPER. Read & Write
Not involved
Not involved
100
100 BSC6900
None
N (No impact on the UE in Read & Write idle mode) Not involved
COMMON
COMMON
Cell
1 Cell
None
MBMS 2 Service
This None Read & Write parameter is used with the "ADD UMBMSALAR None MSERVICE" Read & Write command to enable the no MBMS data This check. parameter is Read & Write
Not involved
Not involved
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
OFF
RNC
valid olny when N (No impact "MbmsSwitch on the UE in " is ON. Read & Write idle mode) Not involved
None
None
MBMS Service
None
Not involved
None
None
MBMS Service
None
Not involved
TRUE
TRUE Cell
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
1 Cell
None
None
OFF
RNC
None
None
D16
RNC
None
None
None
RNC
None
Not involved
None
None
MBMS Service
None
Not involved
None
ON
RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
None
BSC6900
None
Not involved
PTM
PTM
RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
1000 PVC
None
Not involved
10 None
RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved
10 None
RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
30 None
RNC
None
OFF
None
RNC
None
OFF
None
RNC
None
OFF
None
RNC
None
None
None
RNC
None
Not involved
None
None
Cell
None
None
RNC
None
3 RNC
None
7 RNC
None
1 RNC
None The relationship of parameters The must be set of relationship Read & Write None as follows: parameters "McchAccess must be set PeriodCoef" > as follows: "McchRepPeri "McchModPer odCoef". > Read & Write iodCoef" The "DRXCycleLe relationship of nCoef" in parameters "ADDbe set must CNDOMAIN". Read & Write as follows: "McchAccess PeriodCoef" > "McchRepPeri odCoef". Read & Write
N (No impact on the UE in Read & Write idle mode) Not involved
Not involved
Not involved
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
None
MP group
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
None
PVC
None
Not involved
None
None
Board
None
Not involved
None
None
AUTO
AUTO
This parameter is valid when Ethernet port None "InterRatRepo Read & Write rtMode" is set to EVENT_TRIG Cell GER. Read & Write
Not involved
Not involved
None
None
Not involved
None
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
LONG
LONG
MP group
None
None
None
Cell
-7
-7 Cell
FALSE
FALSE Cell
None Read & Write This paramter is valid only when "STTDSupInd None Read & Write " of "ADD UCELLSETU P" is set to STTD_Suppo rted. Read & Write
Not involved
Not involved
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
None
N (No impact on the UE in Read & Write idle mode) Not involved
D14
D14
Transport channel
None
Not involved
SF8
SF8
NodeB
None
21 RNC
None
None
Cell
None
None
Cell
None
None
Cell
None
None
RNC
This parameter is valid only when "ChoiceRprtU nitForDlBasic None is set Read & Write Meas" to MIN,and it must satisfy the following relationship: Read & Write None "MinForDlBasi cMeas" x 60 < "IntraFreqLdb PeriodTimerL None Read & Write en"/2; "MinForDlBasi cMeas" x 60 < "PucPeriodTi merLen"/2; None Read & Write "MinForDlBasi cMeas" x 60 < "LdrPeriodTim erLen"/2; None "MinForDlBasi Read & Write cMeas" x This 60000 < is parameter "OlcPeriodTi valid only merLen"/2 . Read & Write when "ChoiceRprtU This nitForDlOlcM parameter is This is set to eas" only valid parameter is Read & Write MIN. whenonly valid "ChoiceRprtU when This nitForHsdpaR "ChoiceRprtU parameter is ateMeas" is nitForUlBasic valid only set to MIN. Meas" when is set Read & Write to MIN,and it "ChoiceRprtU This satisfy must nitForHsdpaP parameter is the following wrMeas" is valid only relationship: Read & Write set to MIN. when "MinForUlBasi "ChoiceRprtU cMeas" x 60 < nitForHsupaR "LdrPeriodTim ateMeas" is erLen"/2; set to MIN. "MinForUlBasi Read & Write cMeas" x This 60000 < is parameter "OlcPeriodTi valid only merLen"/2 . Read & Write when
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
None
RNC
None
None
RNC
None
None
RNC
None
None
RNC
None
None
RNC
None
None
RNC
"ChoiceRprtU nitForUlOlcM N (No impact eas" is set to on the UE in MIN. Read & Write idle mode) Not involved
None
None
Cell
1 IMA group
313
313 Cell
The value of None this parameter must satisfy the following None relationship: Read & Write "MinPCPICH Power" <= "MaxPCPICH Power". Read & Write
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
30
Not involved
30
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
SF4
SF4
NodeB
None
None
None
Not involved
None
None
Not involved
None
None
N (No impact on the UE in Read & Write idle mode) Not involved
8 Cell
None
Cell
None
None
RNC
None
Not involved
None
None
Cell
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
None
COMM_MOCN _NRI_GLOBA L_CONFIG_M ODE_SWITCH :ON, None COMM_MIB_ RNC MULTI_PLMN _LIST_ALLOW ED_SWITCH: ON RNC
When "MOCNSuppo rt" in "SET UOPERATOR SHARINGMO DE" is set to YES, MocnControlS None needs Read & Write witch to be set.Otherwise ,it does not need. Read & Write
Not involved
Not involved
None
NO
None
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
AUTO
AUTO
BSC6900
None
None
None
SCTP link
None
SCTP link
None
OFF
BSC6900
None
Not involved
None
None
BSC6900
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
None
None
BSC6900
None
None
None
None
Not involved
10000
10000
1000
1000 RAB
This parameter is required when Read & Write None the "RlcMode" parameter is set to AM and the None "AmRlcCfgPa Read & Write ra" parameter is set to FLOWCONT ROL_PARA. Read & Write
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
60 RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
None
MP group
None
None
None
None
When the value of None "SAALLNKT" Read & Write is set to NNI, this parameter is valid. Read & Write
MCPPP
MCPPP
MP group
None
None
None
None
None
None
None
OFF
RNC
None
OFF
RNC
None
None
Cell
None the When value of "MsgInd" is set to ON, this parameter is Read & Write None valid. When "CBSwitch" is set to ON in "SET None URNCCBPAR Read & Write A" and the CBS license is valid, the cell broadcast Read & Write None can be performed in a specified cell. This None Read & Write parameter specifies the content of broadcast messages. Read & Write
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
OFF
OFF
Cell
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
None
None
Not involved
None
ON
BSC6900
60
60 Cell
40
40 Cell
80
80 Cell
The value of this parameter must satisfy None the following Read & Write The value of relationship: this "MtchMaxPwr parameter " >= satisfy mustvalue of The "MtchRsvPwr" Read & Write the following this relationship: parameter "MtchMaxSf" must fulfill the >= following of The value "MtchRsvSf" Read & Write condition: this "MtchMinPerc parameter 0" >= fulfill the must "MtchMinPerc following 15". Read & Write condition:
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
Not involved
Not involved
50
50 Cell
"MtchMinPerc 0" >= "MtchMinPerc 15". Read & Write Not involved
Not involved
None
D16
RNC
None
FALSE RNC
20
20 Cell
The value of None this parameter must satisfy the following None relationship: Read & Write The value of "MtchMaxPwr this " >= parameter "MtchRsvPwr" must satisfy . following Read & Write the
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
16
16 Cell
relationship: "MtchMaxSf" N (No impact >= on the UE in "MtchRsvSf" Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
MET
MET
None
None
None
MET
Cell
None
800
None
1696
1696 BSC6900
None
BSC6900
None
BSC6900
1000
1000 MP group
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
MP group
None
None
None
None
None
None
None
None
100
When the value of None "SAALLNKT" Read & Write is set to NNI, this parameter is valid. Read & Write
Not involved
Not involved
None
3 RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
3 RNC
None
None
3 RNC
None
None
1 RNC
None
None
D1
RNC
None
None
D50
RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
D1
RNC
None
None
D1
RNC
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
0 Cell
The value of None this parameter must be set to meet the of The value None Read & Write following this conditions: parameter "NB01max" to must be set >= the meet "NB01min". Read & Write following conditions: "NB01max" >= "NB01min".
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved
Cell
0 Cell
Cell
None
20 RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved
58080
None
SCTP link
None
None
BSC6900
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
BSC6900
None
None
20 RNC
None
None
None
BSC6900
None
None
None
BSC6900
None
None
None
BSC6900
None
None
None
BSC6900
None
None
Cell
None
None
Cell
None
None
Cell
not be adopted if cell's interfrequency measurement control If the information Downlink has been CAC configured as algorithm not required. switch None select Read & Write Note:Interthe equivalent freq cell user number reselection algorithm,then threshold is Intra set by"ADD Read & Write None Frequency UCELLSELR LDB ESEL".InterAlgorithm frequency must be measurement closed. Read & Write control information is set by "MOD UCELLMEAS ". Read & Write
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
NBM_LDC_MA NBM_LDC_MA TCH_UE_ONL TCH_UE_ONL Y Y Cell ALGORITHM_ ALGORITHM_ DEPEND_ON_ DEPEND_ON_ LCG LCG Cell PRIORITY21&PRIORITY3 1&PRIORITY4 None None Cell 1&PRIORITY5 1&PRIORITY6 None -1 RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
None
None
None
None
None
RNC
None
None
Cell
None If this paramter is not zero, it is valid only None Read & Write when "NBscIndex" in "ADD UNBSC" is added. Read & Write
None
60 RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
None
BSC6900
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
None
Cell
None
None
None
Cell
20
20 Cell
This paramter is valid only when None "DynShutDow Read & Write nType" is set to ConditionalSh utDown. Read & Write
None
None
RNC
None
Not involved
NC0
NC0
Cell
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (Impact on the UE in idle mode) Not involved
4 RNC
None
None
ON
RNC
8 Cell
This parameter is valid only None Read & Write when "NonhcsInd" is set to CONFIGURE D. Read & Write
YES
YES
SCCP
None
BSC6900
None
None
BSC6900
None
Not involved
None
None
IP route
None
Not involved
None
None
None
15
15 Cell
None
None
SCCP
5 Cell
MODE2
MODE2
RNC
The value of the parameter must satisfy the function below: "NFastSpdEst None "*"TSlowSpdE Read & Write st" >= "NSlowSpdEs NMO needs t"*"TFastSpd to be set Est". Read & Write when This "CNDomainId parameter " in "ADD depends on UCNDOMAIN network " is set to planning. Read & Write PS_DOMAIN; NMO does not need to be set when None "CNDomainId Read & Write " in "ADD UCNDOMAIN " is set to CS_DOMAIN. Read & Write
Not involved
Not involved
Not involved
Not involved
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
3 RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
43 None
None
None
57 None
None
None
43 None
None
None
57 None
None
None
43 None
None
None
57 None
None
None
43 None
None
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
57 None
None
None
43 None
None
None
57 None
None
None
43 None
None
None
57 None
None
None
None
None
NodeB
None
Not involved
3840
3840 NodeB
3840
None
None
None When the value of "NODET" in "ADD 3840 NodeB None ADJNODE" is Read & Write set to IUB, this parameter is Adjacent node valid. Read & Write
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved
Not involved
Not involved
None
None
BSC6900
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
None
BSC6900
None
Not involved
None
None
NodeB
None
Not involved
None
None
NodeB
None
Not involved
None
None
NodeB
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
None
NodeB
None
Not involved
None
None
NodeB
None
Not involved
R7
R7
NodeB
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
None
NodeB
None
Not involved
30
30 NodeB
None
Not involved
PERIOD
PERIOD
NodeB
None
Not involved
None
None
NodeB
None
Not involved
None
None
NodeB
None
Not involved
None
None
NodeB
None
Not involved
Normal
Normal
NodeB
None
Not involved
None
None
NodeB
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
NodeB
None
None
None
Not involved
None
PICO_TYPE1 NodeB
None
N (No impact on the UE in Read & Write idle mode) Not involved N (Impact on the UE in idle Read & Write mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
0 Cell
None
50
50 Cell
None
None
Cell
None
None
Cell
None
None
Cell
N (No impact on the UE in None Read & Write idle mode) Not involved This paramter is valid only when N (No impact This paramter "NPrioFlag" is on the UE in is valid only set to TRUE. Read & Write idle mode) Not involved This paramter when is valid only is "NPrioFlag" when TRUE; N (No impact set to "NPrioFlag" is on the UE in Also the value set to TRUE. Read & Write idle mode) Not involved of this parameter must be N (No impact different to on the UE in the others. Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
FALSE
FALSE Cell
None
3 RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved
3 None
None
Not involved
None
None
RNC
None
Not involved
None
None
RNC
None
None
RNC
None
None
RNC
None
None
BSC6900
None
None
RNC
None
None
NodeB
3 Cell
None
None
None
None Read & Write 1. If the original ATM address of the NodeB is configured None Read & Write with the route through "ADD AAL2RT", the parameter None be Read & Write cannot NullNRI must modified. beIf the 2. set When the value of original ATM "CsNriCfgMod address of the Read & Write None e" in "SET NodeB is UOPERATOR configured CFGPARA" is with value of the Theto route set in the the parameter Read & Write None SUPP_IUFLE AAL2RT must satisfy X or table, the the function SUPP_IUFLE parameter below: X_MOCN, cannot be "NFastSpdEst or the value modified. of Read & Write "*"TSlowSpdE "PsNriCfgMod st" in "SET e" >= "NSlowSpdEs UOPERATOR Only when t"*"TFastSpd CFGPARA" is "RestrictionTy Read & Write Est". set to "ADD pe" in SUPP_IUFLE UCELLDSAC X or MANUALPAR SUPP_IUFLE A" is X_MOCN. RestrictionFix Read & Write ed, this parameter should be configured.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
RNC
Not involved
Not involved
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
None
Cell
None
2 RNC
When "DsacAutoSwi tch"is set to ON,the parameter need N (No impact configuring;el on the UE in se,need not. Read & Write idle mode) Not involved
None
None
Ethernet port
0 PPP link
None
BSC6900
0 MP group
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
Not involved
None
None
Port queue
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
Port queue
None
None
None
BSC6900
None
4 Cell
None
-4
-4 Cell
None
4 Cell
None
-4
-4 Cell
2 Cell
-2
-2 Cell
None
3000 RNC
"ChoiceRprtU nitForUlBasic Meas" and "ChoiceRprtU nitForDlBasic Meas" are set to TEN_MSEC,t he value of this None parameter must satisfy the following relationship: "OlcPeriodTi None merLen" > 2 x "TenMsecFor UlBasicMeas" ; None "OlcPeriodTi merLen" > 2 x "TenMsecFor DlBasicMeas" .
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
BSC6900
None
None
None
BSC6900
None
None
None
BSC6900
None
None
None
RNC
None
Not involved
None
None
RAB
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
None
Board
None
None
Cell
None This parameter is valid when the None "CellLocCfgTy Read & Write pe" is set to BOTH or CELL_CENT ER. Read & Write
BSC6900
ACTIVE
ACTIVE
Cell
None
UE_ASSISTE D RNC
This parameter is valid when the None "CellLocCfgTy Read & Write This pe" is set to parameter is BOTH or valid when CELL_ANTE the NNA. Read & Write OVERLAY_S WITCH is ON The OVERLAY_S None is in Read & Write WITCH "HoSwitch" in "SET CORRMALG OSWITCH". Read & Write
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
LOCAL
LOCAL
AAL2 path
None
Not involved
YES
YES
BSC6900
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
70
75 Board
None
60
65 Board
None
ON
ON
Board
None
DISABLED
DISABLED
IP path
None
Not involved
None
None
AAL2 path
None
Not involved
None
None
IP path
None
Not involved
None
None
None
None
None
None
None
PC_AMR_MO DE_INDUCE_ BLER_ALTER _SWITCH:OFF AAL2 path None , PC_DL_INNE R_LOOP_PC_ ACTIVE_SWIT None IP path CH:ON, PC_DOWNLIN K_POWER_B ALANCE_SWI None None TCH:ON, PC_EFACH_E CN0_DYN_AD J_SWITCH:OF F, QoS IP path PC_FP_MULTI _RLS_IND_S WITCH:ON, PC_HSUPA_H None ARQNUM_AU None TO_ADJUST_ SWITCH:OFF, PC_HSUPA_P -20 O_UPDATE_S Cell -20 WITCH:OFF, PC_INNER_L OOP_LMTED_ PWR_INC_SW Physical 330 ITCH:OFF, 330 channel PC_OLPC_S WITCH:ON, PC_RL_RECF 2 G_SIR_TARG2 Cell ET_CARRY_S WITCH:OFF, PC_SIG_DCH _OLPC_SWIT None PVC CH:OFF, PC_UL_SIRE RR_HIGH_RE L_UE_SWITC H:OFF RNC
1. The value of this parameter must satisfy the following None relationship: "MinPCPICH Power" <= "PCPICHPow None er" <= "MaxPCPICH Power" 2. To modify the PCPICH None power, the intrafrequency load balance None algorithm of the cell should be disabled. You can use "LST None UCELLALGO SWITCH" to query the switch and None use "MOD UCELLALGO SWITCH" to modify the switch.
N (No impact on the UE in Read & Write idle mode) Not involved
Not involved
N (No impact on the UE in Read & Write idle mode) Not involved
Not involved
N (No impact on the UE in Read & Write idle mode) Not involved N (Impact on the UE in idle Read & Write mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
Not involved
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
5 SCCP
None
None
None
Cell
None
None
None
BSC6900
None
Not involved
None
None
MP group
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
None
None
None "IPADDR" and "PEERIPADD None "ADD R" in IPPATH" must be at one network segment; None ("IPADDR","P EERIPADDR" ,"PEERMASK " in "ADD None IPPATH") conflicts with other IPPATH whose type is IUPS.
Not involved
None
None
BSC6900
Not involved
None
None
SCTP link
SCTP link
None
None
SCTP link
SCTP link
None
None
IP path
Not involved
None
None
IPoA PVC
None
BSC6900
None
None
BSC6900
None
Not involved
None
None
None
Invalid
Invalid
Cell
None ("IPADDR","P EERIPADDR" ,"PEERMASK " in "ADD None Read & Write IPPATH") conflicts with other IPPATH whose type is IUPS. Read & Write
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved
Not involved
Not involved
None
None
NodeB
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
None
SCTP link
None
SCTP link
None
None
RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
none
BSC6900
None
Not involved
None
none
BSC6900
None
Not involved
None
none
BSC6900
None
Not involved
None
None
IPoA PVC
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
30
30 Cell
None
30
30 Cell
None
D4000
D4000
RAB
D4000
D4000
RAB
1 RAB
This parameter is required when Read & Write None the "RlcMode" parameter is set to AM and the None "AmRlcCfgPa Read & Write ra" parameter is set to FLOWCONT ROL_PARA. Read & Write
1 RAB
parameter is required when the "RlcMode" parameter is set to AM and the When the "AmRlcCfgPa value of ra" parameter "PATHCHK" is set to N (No impact in "ADD FLOWCONT on the UE in IPPATH" is ROL_PARA. Read & Write idle mode) Not involved set to ENABLED, This this N (No impact parameter is parameter is on the UE in valid when valid. Read & Write idle mode) Not involved "InterFreqRep ortMode" is set to N (No impact EVENT_TRIG on the UE in GER. Read & Write idle mode) Not involved This parameter is valid when None "InterRatRepo Read & Write rtMode" is set to EVENT_TRIG GER. Read & Write N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
5 IP path
1 Cell
4 Cell
1 Cell
4 Cell
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved
D16
D16
Cell
None
D16
D16
Cell
None
D64
D64
Cell
None
150 RNC
None
None
Physical channel
This None parameter is valid when "AccessServic eClass" is set None Read & Write to ASC2,ASC3, ASC4,ASC5, ASC6 or ASC7. Read & Write
Not involved
Not involved
Enable
Enable
PPP link
None
PPP link
Enable
Enable
MP link
None
None
Board
from TRMMAP; if the phb of this transmission path is BE,AF11,AF1 2,AF13,AF21, AF22,AF23,A F31,AF32,AF 33,AF41,AF4 None Read & Write Y 2,AF43,EF, use the phb of transmission path. Read & Write Not involved
BSC6900
Not involved
None
None
IP Path
None
N (No impact on the UE in Read & Write idle mode) Not involved N (Impact on the UE in idle Read & Write mode) Not involved
None
None
Cell
None
Physical 6 channel
None
Not involved
None
None
Cell
None
Not involved
3 Cell
None
Not involved
None
8 Cell
None
Not involved
2 Cell
None
Not involved
4 Cell
None
Not involved
0 Cell
None
Not involved
Physical 1 channel
None
Not involved
None
None
Cell
None
Not involved
10
10 Cell
None
Not involved
V36
V36
Physical channel
None
Not involved
-7
-7 Cell
None
None
None
Not involved
None
None
BSC6900
None
N (No impact on the UE in Read & Write idle mode) Not involved
10
10 BSC6900
None
Ethernet port
128
128 BSC6900
None
Ethernet port
128
Not involved
56
128
None
None
56 Ethernet port The value of Read & Write None this parameter must satisfy the following 128 Ethernet port None relationship: Read & Write "PlmnValTag Max" > "PlmnValTag RNC Min". Read & Write
Not involved
Not involved
Not involved
Not involved
None
None
RNC
The value of this parameter must satisfy the following relationship: "PlmnValTag Max" > "PlmnValTag Min". Read & Write Not involved
Not involved
10
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
30
60
60 Board
None
60
67 Board
None
50
50 Board
None
50
62 Board
None
ON
ON
Board
None
None
None
None
None
None
None
None
None
None
None
BSC6900
None
None
None
Board
None
Not involved
None
None
E1/T1 port
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
If port 0 or port 4 None of the Read & Write FG2a board is set to the GE port, the port number can BSC6900 None 0 or 4. Read & Write only be Otherwise, the port number ranges Board None from 0 Read & Write to 7. If only port 0 is set to the GE port, Channelized ports 1-3 are optical port None unavailable. If Read & Write port 4 is set to the GE port, ports 5-7 are Ethernet port unavailable. Read & Write Loopback optical port
BSC6900
Not involved
Not involved
Not involved
Not involved
None
None
Not involved
None
None
None
None
Not involved
None
None
NodeB
None
Not involved
None
None
BSC6900
None
Not involved
None
None
BSC6900
None
50 RNC
The value of this parameter must be set to meet the following conditions: None Read & Write 100 x "MaxQueueTi meLen" > "PollTimerLen ". Read & Write
Not involved
Not involved
None
750(UNI), 100(NNI)
SAAL link
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
BSC6900
None
None
None
BSC6900
None
None
None
Not involved
CLOSE
None
None
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
CLOSE
None
None
None
CLOSE
None
None
None
CLOSE
None
None
None
CLOSE
None
None
None
CLOSE
None
None
None
None
In signaling transmission mode, set PowerOffsetPp m to -3; in service transmission mode, set PowerOffsetPp Physical m to -2. channel
None
Not involved
2 Cell
None
None
None
PPP link
None
Not involved
None
None
MP link
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
Disable
Disable
D500
D500
IP logical port When the None value of "PORTPROT YPE" in "ADD PORTFLOW MP group None CTRLPARA" is set to IP, this parameter 2 BSC6900 should be set. This parameter is valid when "InterFreqRep 4 Cell None ortMode" is set to PERIODICAL _REPORTIN Cell G.
Not involved
N (No impact on the UE in Read & Write idle mode) Not involved N (Impact on the UE in idle Read & Write mode) Not involved N (Impact on the UE in idle Read & Write mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
SIGNATURE0, SIGNATURE1, SIGNATURE2, 20 SIGNATURE3, Cell 20 SIGNATURE4, SIGNATURE5, SIGNATURE6, Physical SIGNATURE7 channel
None
None
None
OFF
RNC
None
None
ON
RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
60
60 Board
None
60
72 Board
None
50
50 Board
None
50
65 Board
None
ON
ON
Board
None
0 SCCP
None
0 None
None
None
None
IP route
None
Not involved
HIGH
HIGH
Cell
None
Not involved
None
ARP
RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
1 RNC
None
1 RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
1 RNC
None
1 RNC
None
1 RNC
None
None
BSC6900
None
None
RNC
None
None
RNC
ITUT
ITUT
SCCP
None
20 RNC
None
20 RNC
None
20 RNC
None
20 RNC
None the 1. For detection timers that do not need to configure None 1. For the background detection services, the timers that do related T1 not need to and T2 must configure Noneatthe 1. 0 beFor the conversationa detection same time.the l services, do timers the 2. For that related T1 not need detection to and T2 must configure timers the IMS None 1. 0 at the beFor that signaling need to detection same time. services, the configure do timers that 2. For the related T1 background not need to detection and T2 must services, the configure timers the Noneatthat be 0 related T1 interactive need to same time. and T2 must services, configure the 2. For the not be 0 at related T1 conversationa detection the same the and T2 must l services, timers the time. atthat be 0 T1 related need to same time. and T2 must configure IMS 2. For 0 at not be the signaling detection the same the services, timers that time. T1 related need to and T2 must configure not be 0 at interactive the same the services, time. T1 related and T2 must not be 0 at the same time.
Not involved
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
When the interface type RNC None 20 is Iub, transmission type is ATM or dual stack, the None ALL parameter is E1/T1 port When the RT_VBR; interface type transimssion is Iub, type is IP or transmission Hybird IP, the Board None None type is ATM parameter isor IP, the AF23. parameter is When the NULL; interface type Channelized None ALL transimssion optical port is Iur, type is dual transmission type is ATM, CORRM_SRN stack, the CORRM_SRN the parameter SR_PSBE_RE parameter is SR_PSBE_RE AF23; is RT_VBR; LOC LOC RNC transimssion Hybird type is IP, the IP, the parameter is parameter is AF23. 100 When the 100 BSC6900 LQAF23. When the interface type interface type is Iu-PS, the is Iur, parameter is transmission BSC6900 None AF23. type is ATM or IP, the parameter is NULL. 30 When the 30 BSC6900 interface type is Iu-PS, the parameter is None NULL. BSC6900
detection timers that need to configure streaming services, the related T1 and T2 must not be 0 at N (No impact the same on the UE in time. Read & Write idle mode) Not involved
None
Not involved
None
Not involved
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (Impact on the UE in idle Read & Write mode) Not involved
When the None value of "ITFT" in "ADD TRMMAP" is None IUB or set to IUR or IUPS, this parameter is valid. When the value of "ITFT" in "ADD None TRMMAP" is set to IUB or IUR, this parameter is valid.
100
100 BSC6900
None
100
100 BSC6900
None
-50
None
None
None
NULL; interface type transimssion is Iur, type is dual transmission stack, the type is ATM, parameter is the parameter AF43; is RT_VBR; transimssion type is Hybird IP, the IP, the parameter is parameter is AF43. 70 When the 70 BSC6900 LQAF43. When the interface type interface the is Iu-PS, type is Iur, parameter is transmission BSC6900 AF43. type is ATM or IP, the parameter is NULL. 100 When the 100 BSC6900 interface type is Iu-PS, the parameter is NULL. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is None IUB or set to IUR or IUPS, this parameter is valid. When the value of "ITFT" in "ADD None TRMMAP" is set to IUB or IUR, this parameter is valid.
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
0 BSC6900
None
70
70 BSC6900
None
None
None
Cell
None
None
Cell
30
30 BSC6900
100
100 BSC6900
60
60 Cell
None
20 RNC
None the 1. For detection timers that do not need to configure None background services, the related T1 and T2 must Noneat the be 0 This time. same parameter is 2. For the valid when detection "NcovHoOn2 timers that None in GldInd" need to "SET configure UINTERRAT background HONCOV" is services, the set to ON. related T1 and T2 must not be 0 at the same time.
Cell
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
20 RNC
None
20 RNC When the interface type RNC 20 is Iub, the When transmission interface type type is ATM or is Iub, dual stack, the transmission 20 RNC parameter isor type is ATM RT_VBR; IP, the transimssion parameter is When IP type isthe or NULL; type interface Hybird IP, the RNC OFF transimssion is Iub, the is parameter When type is dual transmission AF23. thetype interface stack, ATM or type is When the is is Iub, parameter the dual stack, interface type transmission RNC AF23; parameter isor is Iur, ATM900 type is transimssion RT_VBR; transmission IP, the type is Hybird transimssion type is ATM, parameter is IP, the IP or type is the parameter NULL; parameter the Hybird IP, is 100 is RT_VBR;100 BSC6900 transimssion LQAF23. is parameter transimssion type is dual When the AF23. the the type is IP, stack, interface type When the is parameter is parameter is Iur, interface AF23. type transmission 100 AF23; the 100 BSC6900 is Iur, When ATM or transimssion type is transmission interface type type is IP, the Hybird type is ATM, is Iu-PS, the IP, the parameter is the parameter parameter is parameter is NULL. is RT_VBR; AF23. the BSC6900 LQAF23. When transimssion When the interface type type is IP, the interface type is Iu-PS, the parameter is is Iur, parameter is AF23. transmission BSC6900 NULL. the When ATM or type is interface type IP, the is Iu-PS, the parameter is parameter is NULL. AF23. the BSC6900 When interface type is Iu-PS, the parameter is NULL. BSC6900
None
None
None
None
not need detection to and T2 must configure timers the 1. 0 at the beFor that interactive need to detection same time. services, do configure the timers the 2. For that related T1 conversationa not need detection to and T2 must l services, the configure timers that be 0 at the related T1 streaming need to same time. and T2 must services, the configure IMS 2. For 0 at not be the related T1 signaling detection the same the and T2 must services, timers the time. atthat Read & Write be 0 related T1 need to same time. and T2 must configure 2. For the not be 0 at interactive detection the same the services, timers time. that Read & Write related T1 need to and T2 must PsInfoUpdTm configure not be 0to be r needs at streaming the when the set same services, time. T1 "PsInfoUpdFl Read & Write related ag" T2 must and in "SET UOPERATOR not be 0 at CFGPARA" the same is set to time. ON; Read & Write PsInfoUpdTm r does not need to be set when None "PsInfoUpdFl Read & Write ag" in "SET UOPERATOR CFGPARA" is set to OFF. Read & Write
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
None
None
When the None value of "ITFT" in "ADD TRMMAP" is None IUB or set to the When IUR or IUPS, value of this "ITFT" in parameter is "ADD the When valid. TRMMAP" is value of set to IUB or "ITFT" in IUR, this "ADD parameter is TRMMAP" is valid. IUB or set to the When IUR or IUPS, value of this "ITFT" in parameter is "ADD valid. TRMMAP" is
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
set to IUB or IUR, this N (No impact parameter is on the UE in valid. Read & Write idle mode) Not involved
None
the parameter parameter is is RT_VBR; LQAF23. transimssion When the type is IP, the interface type parameter is is Iur, AF23. transmission When the or type is ATM interface type IP, the is Iu-PS, the parameter is parameter is NULL. AF23. the BSC6900 When interface type is Iu-PS, the parameter is NULL.
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or When the IUR or IUPS, value of this N (No impact "ITFT" in parameter is on the UE in "ADD valid. Read & Write idle mode) Not involved TRMMAP" is set to IUB or IUR, this parameter is valid. Read & Write PSNRILength needs to be set when the value of None "PsNriCfgMod Read & Write e" in "SET UOPERATOR CFGPARA" is set to None Read & Write SUPP_IUFLE X, SUPP_MOCN or None SUPP_IUFLE Read & Write X_MOCN; The network PSNRILength resource does not identifierbe need None to (NRI) needs Read & Write set when the to be set value of when MOCN "PsNriCfgMod or Iu-Flex is e" in "SET supported. UOPERATOR Read & Write CFGPARA" is set to SUPP_NONE . Read & Write N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
BSC6900
30
30 BSC6900
100
100 BSC6900
30
30 BSC6900
100
100 BSC6900
None
SUPP_NONE RNC
None
None
None
None
40 RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
100 RNC
None
None
60 RNC
None
None
200 RNC
None
None
None
OFF
None
None
None
When the interface type is Iub, transmission type is ATM or dual stack, the parameter is When the RT_VBR; interface type transimssion is Iub, IP or type is transmission Hybird IP, the Cell None type is ATM parameter isor IP, the AF43. parameter is When the NULL; type interface TRUE transimssion RNC is Iur, type is dual transmission stack, ATM, type isthe parameter is the parameter AF43; is RT_VBR; OFF Cell transimssion Hybird type is IP, the IP, the parameter is parameter is AF43. 100 LQAF43. 100 BSC6900 When the When the interface type interface type is Iu-PS, the PS_BE_EXTR is Iur, parameter is A_LOW_RATE transmission BSC6900 AF43. _ACCESS_S type is ATM or WITCH:OFF, IP, the PS_BE_INIT_ parameter is RATE_DYNAM NULL. 100 IC_CFG_SWIT BSC6900 When the 100 CH:OFF,PS_B interface type E_IU_QOS_N is Iu-PS, the EG_SWITCH: parameter is OFF,PS_RAB_ NULL. DOWNSIZING BSC6900 _SWITCH:ON, PS_RSC_FEE DBK_RABSET 0 UP_CACFAIL_ BSC6900 0 SWITCH:OFF, PS_STREAM_ IU_QOS_NEG _SWITCH:OFF 100 , 100 BSC6900 PS_BE_STRIC T_IU_QOS_N EG_SWITCH: OFF RNC
When "DsacAutoSwi tch"is set to None Read & Write ON,the parameter need configuring;el se,need not. Read & Write
N (Impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
When None the value of "ITFT" in "ADD TRMMAP" is None IUB or set to IUR or IUPS, this parameter is valid. When the value of "ITFT" in "ADD None TRMMAP" is set to IUB or IUR, this parameter is valid.
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
PS_RAB_DO WNSIZING_S WITCH is Nonewhen Read & Write valid DRA_DCCC_ SWITCH in "DraSwitch" is set to ON. Read & Write
None
None
BSC6900
None
Not involved
None
None
BSC6900
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
None
None
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
BSC6900
None
None
None
E1/T1 port
None
BSC6900
None
None
BSC6900
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
BSC6900
None
None
ON
RNC
None
None
OFF
RNC
None
None
ON
RNC
None
None
None
E1/T1 port
None
BSC6900
None
None
E1/T1 port
None
BSC6900
None
None
BSC6900
None
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
None
BSC6900
None
6 RNC
None
1800 RNC
"MinForDlBasi cMeas"; When "ChoiceRprtU nitForDlBasic Meas" is set to TEN_MSEC,t he value of this parameter None Read & Write must satisfy the following relationship: "PucPeriodTi None Read & Write merLen" x 1000 > 2 x "TenMsecFor DlBasicMeas" . Read & Write
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
10 RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
BSC6900
None
None
None
BSC6900
None
None
None
BSC6900
None
None
None
None
None
None
None
None
None
None
None
None
Port queue
None
None
None
Port queue
None
None
None
None
None
None
None
CS2
CS2
When the value of "NODET" in "ADD ADJNODE" is set to IUB, IUR, or IUCS, and the value of "IsROOTNOD Port queue None"ADD Read & Write E" in ADJNODE" is set to YES, or the value of "NODET" in Read & Write Port queue None "ADD ADJNODE" is set to UNI_AAL2SW Port queue None or Read & Write ITCH NNI_AAL2SW ITCH, this parameter is Adjacent node valid.paramter Read & Write This
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
20
20 Cell
is valid only when N (Impact on "UseOfHcs" is the UE in idle This set to TRUE. Read & Write mode) Not involved parameter is valid only when N (No impact "UseOfHcs" is on the UE in set to USED. Read & Write idle mode) Not involved N (Impact on the UE in idle Read & Write mode) Not involved N (Impact on the UE in idle Read & Write mode) Not involved N (Impact on the UE in idle Read & Write mode) Not involved N (Impact on the UE in idle Read & Write mode) Not involved
20
20 Cell
255
255 Cell
None
255
255 Cell
None
255
255 Cell
None
255
255 Cell
None
0 Cell
None
None
Cell
N (Impact on the UE in idle This paramter None only Read & Write mode) Not involved is valid when "QqualminInd N (Impact on " is set to the UE in idle TRUE. Read & Write mode) Not involved
-18
-18 Cell
None
FALSE
FALSE Cell
None
None
Cell
N (Impact on the UE in idle This paramter None only Read & Write mode) Not involved is valid when "QrxlevminInd N (Impact on " is set to the UE in idle TRUE. Read & Write mode) Not involved N (Impact on the UE in idle Read & Write mode) Not involved
-50
-50 Cell
None
-58
-58 Cell
FALSE
FALSE Cell
N (Impact on the UE in idle This paramter None only Read & Write mode) Not involved is valid when "QrxlevminInd N (No impact " is set to on the UE in TRUE. Read & Write idle mode) Not involved N (Impact on the UE in idle Read & Write mode) Not involved N (Impact on the UE in idle Read & Write mode) Not involved N (Impact on the UE in idle Read & Write mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
FALSE
FALSE Cell
None
FALSE
FALSE Cell
None
None
None
OFF
RNC
None
None
5 RNC
None
None
None
RNC
None
None
None
RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (Impact on the UE in idle Read & Write mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
RAB
None
None
5 RNC
None
None
None
RNC
None
None
SELECT ALL
Physical channel
None
None
30000 RNC
None
None
NO
RNC
None
None
None
Cell
None
None
120000 RNC
None
230
None
Not involved
1 Cell
None
Not involved
5000
5000 Cell
None
N (No impact on the UE in Read & Write idle mode) Not involved
68
68 Cell
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
3000
3000 Cell
None
None
None
BSC6900
None
Not involved
None
5000 RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
5000 RNC
None
None
None
None
The value of 5000 RNC None this parameter must be larger than the value of REC_ALL BSC6900 None the "UpLimitCoun tingTime" parameter 96 96 IP logical port None the under "SET URNCMBMS PARA" 6 RNC command.
130
130 Cell
None
30
None
None
Board
None
None
None
Cell
None
None
RNC
None
None
AMR:100; Other:0
RNC
None
0 Cell
0 RNC
None
None
Cell
None
None
Cell
None
None
RNC
None
None
Cell
TER_FREQU {1887, 1912, the parameter frequencies: UCELLDRD" ENCY 1962, 1937, or set through [1537-1738] and "SET ONLY_TO_IN 1987, 2012, the "ADD Special UDRD" 1. This TER_RAT. 2037, 2062, UCELLDRD" frequencies: commands, parameter 2. If the value 2087} 1912, command is {1887, the parameter valid when of this Band5 takes 1962, 1937, set throughis "RedirSwitch" parameter Common precedence 1987, 2012, the in to the is setthat set "ADD set frequencies: over both 2037, 2062, UCELLDRD" ONLY_TO_IN "SET [4357-4458] through the 2087} command TER_FREQU REDIRECTIO Special "SET UDRD" Band5 takes or ENCY "ADD Read & Write N" and frequencies: command. Common precedence ONLY_TO_IN CELLREDIRE {1007, 1012, frequencies: over that set 1. This TER_RAT. CTION" 1032, 1037, [4357-4458] through value parameter is 2. If the the commands, 1062, 1087} Special "SETwhen valid UDRD" of this the value set Band6 frequencies: command. is Read & Write "RedirSwitch" parameter in the "ADD Common {1007,both the is set 1012, set in to CELLREDIRE frequencies: 1032, 1037, ONLY_TO_IN "SET CTION" [4387-4413] This 1087} 1062, TER_FREQU REDIRECTIO command is Special parameter Band6 or ENCY "ADD Read & Write N" and prevails. frequencies: valid when Common ONLY_TO_IN CELLREDIRE {1037, 1062} "RedirBandIn frequencies: TER_RAT. CTION" Band7 set to d" If the value [4387-4413] 2. is not commands, Common BandIndNotU Special set of this the value frequencies: Read & Write This sed. "ADD frequencies: parameter is in the [2237-2563] parameter the {1037,both is set in 1062} CELLREDIRE Special valid when Band7 "SET CTION" frequencies: "RedirSwitch" Common REDIRECTIO command {2587, 2612, is set to"ADD frequencies: Read & Write N" and prevails. 2637, 2662, ONLY_TO_IN [2237-2563] CELLREDIRE 2687, 2712, TER_FREQU Special CTION" 2737, 2762, ENCY or frequencies: commands, 2787, 2812, ONLY_TO_IN {2587, 2612, the value set 2837, 2862, Read & Write This 2662, TER_RAT. 2637, in the "ADD 2887, 2912} parameter is 2687, 2712, CELLREDIRE 1. This Band82762, valid when 2737, CTION" is parameter Common "RedirSwitch" 2787,when 2812, command valid to frequencies: is set 2862, 2837, prevails. "RedirSwitch" [2937-3088] Read & Write ONLY_TO_IN 2887, to is set 2912} Special TER_FREQU Band8 ONLY_TO_IN frequencies: ENCY or Common TER_FREQU none ONLY_TO_IN frequencies: ENCY or Band9 TER_RAT. [2937-3088] Read & Write ONLY_TO_IN Common Special TER_RAT. frequencies: frequencies: 2. If the value [9237-9387] none of this Special Band9 None parameter is Read & Write frequencies: Common the set in none both frequencies: "SET BandIndNotU [9237-9387] REDIRECTIO sed: Special"ADD N" and [0-16383] frequencies: Read & Write CELLREDIRE none CTION" BandIndNotU commands, sed: the value set [0-16383] in the "ADD Read & Write CELLREDIRE CTION" command prevails. Read & Write
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
None
RNC
None
None
Cell
None
None
RNC
None
None
Cell
None
None
RNC
None
None
Cell
None
None
RNC
None
None
Cell
2562, TRUE. set to 2587, frequencies: 2612, 2637, 2. This [2712-2863] 2662, 2687} parameter is Special Band8: valid when frequencies: Common This "RedirBandIn none frequencies: parameter is d" is set Band9: to [2712-2863] valid when BandIndNotU Common Special "RedirBandIn sed. frequencies: frequencies: d" is not set to 3. If the value [8762-8912] none BandIndNotU of this Special Band9: sed. parameter is frequencies: Read & Write Common the set in none both frequencies: "SET BandIndNotU [8762-8912] If this REDIRECTIO sed: Special"ADD parameter N" and [0-16383] is Read & Write frequencies: set through CELLREDIRE 1. This nonethe both CTION" is parameter BandIndNotU "ADD commands, If thiswhen valid sed: UCELLDRD" the value set parameter is Read & Write "RedirUARFC [0-16383] 1. the "ADD andthrough in This set "SET is NUplinkInd" is parameter UDRD" CELLREDIRE both the set towhen valid TRUE. commands, CTION" "ADD 2. This "RedirBandIn the parameter command is UCELLDRD" parameter to d" through not setis"SET prevails. set Read & Write and when valid BandIndNotU the "ADD UDRD" "RedirBandIn sed. UCELLDRD" commands, d" If the value 2. is set to command the parameter BandIndNotU of this takes set throughis Read & Write sed. parameter precedence the in both the set "ADD set over that UCELLDRD" "SET the through command REDIRECTIO "SET UDRD" takes "ADD N" and command. precedence Read & Write CELLREDIRE over that set CTION" through the commands, "SET UDRD" the value set command. in the "ADD Read & Write CELLREDIRE CTION" This command is parameter prevails. Read & Write valid when
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
None
RNC
"RedirBandIn d" is not set to N (No impact BandIndNotU on the UE in sed. Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
0 None
Board
None
0 None
Board
None
OFF
None
Board
None
OFF
None
Board
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
NO
NO
Board
None
None
ON
RNC
None
None
None
RNC
None
3000
None
None
5000 RNC
None
None
10000 RNC
None
None
15000 RNC
None
None
20000 RNC
None
None
3000 RNC
None
None
45000 RNC
None
None
5000 RNC
None
None
5000 RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
10000 RNC
None
5000
None
None
2 RNC
None
None
None
BSC6900
None
None
None
None
None
None
None
IP route
None
None
0 RNC
None
Not involved
None
300 RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
D4000
D4000
Cell
None
D4000
D4000
Cell
None
D1000
D1000
Cell
None
None
ON
None
None
WITCH_0_BIT RESERVED_S 20:OFF, WITCH_1_BIT RESERVED_S 19:ON, WITCH_0_BIT RESERVED_S 21:OFF, WITCH_1_BIT RESERVED_S 20:ON, WITCH_0_BIT RESERVED_S 22:OFF, WITCH_1_BIT RESERVED_S 21:ON, WITCH_0_BIT RESERVED_S 23:OFF, None WITCH_1_BIT RAB RESERVED_S 22:ON, WITCH_0_BIT RESERVED_S 24:OFF, WITCH_1_BIT RESERVED_S 85 23:ON, 60 WITCH_0_BIT Board RESERVED_S 25:OFF, WITCH_1_BIT RESERVED_S 24:ON, WITCH_0_BIT RESERVED_S 85 26:OFF, 75 WITCH_1_BIT Board RESERVED_S 25:ON, WITCH_0_BIT RESERVED_S 27:OFF, WITCH_1_BIT RESERVED_S 70 26:ON, 50 WITCH_0_BIT Board RESERVED_S 28:OFF, WITCH_1_BIT RESERVED_S 27:ON, WITCH_0_BIT RESERVED_S 70 29:OFF, 65 WITCH_1_BIT Board RESERVED_S 28:ON, WITCH_0_BIT RESERVED_S 30:OFF, WITCH_1_BIT RESERVED_S 29:ON, ON WITCH_0_BIT Board RESERVED_S 31:OFF, WITCH_1_BIT RESERVED_S 30:ON, WITCH_0_BIT RESERVED_S 32:OFF WITCH_1_BIT RNC 31:ON, RESERVED_S WITCH_1_BIT 32:ON RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
None
None
None
None
None
None
0 RNC
None
None
4294967295 RNC
None
None
0 RNC
None
None
255 RNC
None
None
None
BSC6900
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
5000
None
NO
None
BSC6900
None
3 PPP link
None
BSC6900
3 MP link
None
N (No impact on the UE in Read & Write idle mode) Not involved N (Impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
None
None
None Cell SRB_OVER_H SDPA:ON, SRB_OVER_H SUPA:ON, None BSC6900 TTI_2MS:ON, MIMO:ON, 64QAM:ON, L2_ENHANCE 1 :ON, 1 RAB DTX_DRX:ON, HSSCCH_LES S_OPERATIO N:ON RNC
This parameter is required when Read & Write None the "RlcMode" parameter is set to AM and the None "AmRlcCfgPa Read & Write ra" parameter is set to FLOWCONT ROL_PARA. Read & Write
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
1 None
BSC6900
None
None
None
RAB
None
None
None
None
None
None
None
Transport channel
None
None
Cell
The value of None Read & Write this parameter mustvalue of The not be smaller than this "RlMinDlPwr". Read & Write parameter
Not involved
Not involved
None
None
Cell
must not be larger than N (No impact "RlMaxDlPwr" on the UE in . Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
5000 RNC
None
None
5000 RNC
None
None
5000 RNC
None
None
5000 RNC
None
None
None
None
None
Not involved
None
None
RNC
None
Not involved
None
None
RNC
None
Not involved
None
None
Subsystem
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
0 RNC
None
Not involved
None
None
RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
RNC
None
None
None
BSC6900
None
20
None
None
RNC
None
None
200 RNC
None
None
60 RNC
None
None
4 RNC
None
None
5000 RNC
None
None
5000 RNC
None
None
5000 RNC
None
None
350 RNC
None
None
1000 RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
5000 None
None
5000 RNC
None
None
AAL2 path
When the value None of Read & Write "CARRYT" in "ADD AAL2PATH" is set to UNI, None Read & Write IMA, the When FRAATM, or value of NCOPT, this "ADDTORSC parameter is GRP" in "ADD valid. AAL2PATH" Read & Write
None
None
AAL2 path
is set to YES, When this N (No impact "ISFIRSTCLA parameter is on the UE in SSE" in "ADD valid. Read & Write idle mode) Not involved RSCGRP" is
None
None
Not involved
None
None
None
Not involved
None
None
Not involved
SHARE
SHARE
NodeB
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
None
BSC6900
None
Not involved
None
15000(UNI), 1500(NNI)
SAAL link
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
BSC6900
None
OFF
OFF
SCCP
When the value of "SPCBITS" is set to BIT14 or BIT24, this parameter is valid. Read & Write Y
BSC6900
None
2 RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
0 RNC
None
None
None
RNC
None
Not involved
None
None
Cell
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
NodeB
None
None
None
RNC
None
None
None
BSC6900
None
None
0 RNC
None
None
None
BSC6900
None
None
0 RNC
None
None
0 RNC
None
None
0 RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
0 RNC
None
None
0 RNC
None
None
0 RNC
None
None
0 RNC
None
None
None
RNC
None
Not involved
0 Cell
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
0 NodeB
None
0 RNC
None
None
None
BSC6900
None
None
0 RNC
None
0 Cell
None
0 NodeB
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
0 RNC
None
None
None
BSC6900
None
None
0 RNC
None
None
None
BSC6900
None
None
0 RNC
None
None
None
BSC6900
None
None
0 RNC
None
None
None
BSC6900
None
None
0 RNC
None
None
None
BSC6900
None
None
0 RNC
None
None
None
BSC6900
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
0 RNC
None
None
None
BSC6900
None
None
None
None
BSC6900
4294967295
4294967295 SCCP
None
1 RNC
When "RTCPSwitch " in "ADD None UCNNODE" Read & Write is set to ON, RTCPBWRati o needs to be set. Read & Write
BSC6900
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
180 RNC
None
180 RNC
None
OFF
RNC
When "CNDomainId Read & Write None " is set to CS_DOMAIN, and "TnlBearerTy None set to Read & Write pe" is IP_TRANS, RTCPSwitch needs to be set. Read & Write
None
None
BSC6900
None
Not involved
None
None
BSC6900
None
Not involved
None
180 RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
180 RNC
None
D16000
RNC
None
D64
RNC
The following relationship must be satisfied: "RtDH2FTvm Thd" < "RtF2DHTvm Thd"; "RtDH2FTvm Thd" < "RtEFach2DH Read & Write None TvmThd"; "RtDH2FTvm Thd" < "RtEFach2Cp None Read & Write cTvmThd"; "RtDH2FTvm Thd" < "RtF2CpcTvm Thd". Read & Write The following relationship must be None Read & Write satisfied: "RtDH2FTvm Thd" < "RtEFach2Cp cTvmThd". Read & Write The following relationship must be None Read & Write satisfied: "RtDH2FTvm Thd" < "RtEFach2DH TvmThd". Read & Write The following relationship must be None Read & Write satisfied: "RtDH2FTvm Thd" < "RtF2CpcTvm Thd". Read & Write The following relationship must be None Read & Write satisfied: "RtDH2FTvm Thd" < "RtF2DHTvm Thd". Read & Write
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
D5000
RNC
None
D1024
RNC
None
D0
RNC
None
D1024
RNC
None
D0
RNC
None
D1024
RNC
None
D0
RNC
None
D1024
RNC
None
D0
RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved
12
25
1000
3000
1000
None
None
None
None
None
None
None
None
None
None
When "GRPT" in "ADD RSCGRP" is set to ATM or The value to is "BWMODE" be set set to 12 SCTP link None should Read & Write be larger than FULL_DUPLE thethis X, value of "RTOMIN" is parameter in "ADD valid;The sum 25 SCTP link None Read & Write SCTPLNK" of "TxBw" and but smaller "RxBw" in than value to "ADD value The the of set should RSCGRP" of be 1000 SCTP link "RTOMAX". Read & Write upper class be larger than RSCGRP of the value can not less than "RTOMIN" to The"TxBw" in the value "ADD should be set and "AllBw" in Read & Write 3000 SCTP link SCTPLNK". be smaller "ADD than the value RSCGRP"of of "RTOMAX" lower class in "ADD RSCGRP;The 1000 SCTP link SCTPLNK". Read & Write "TxBw" in "ADD RSCGRP" of upper class RSCGRP can Read & Write BSC6900 None not less than the "TxBw" in "ADD RSCGRP" of 5 IP logical port None class Read & Write lower RSCGRP, and the "RxBw" in "ADD 5 IP logical port None Read & Write RSCGRP" of upper class RSCGRP can not less than IP path None the "RxBw" in Read & Write "ADD Transmission RSCGRP" of When the resource lower class value of group RSCGRP. Read & Write "CARRYT" is set to IMA, UNI, ATM logical FRAATM, port None Read & Write NCOPT, or ATMLOGICP ORT, this parameter is SAAL link valid. Read & Write
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
Not involved
Not involved
None
None
AAL2 path
"CARRYT" in "ADD AAL2PATH" is set to UNI, IMA, FRAATM, NCOPT, or ATMLOGICP ORT, this parameter is valid. Read & Write Y
AAL2 path
None
None
IPoA PVC
None
None
BSC6900
None
1172 RNC
None The value of the parameter must satisfy the function None Read & Write below: The value of "RxTxtoTrig6 the parameter F" - satisfy must "RxTxtoTrig6 the function G" >= 256. Read & Write below:
N (No impact on the UE in Read & Write idle mode) Not involved
Not involved
Not involved
None
876 RNC
"RxTxtoTrig6 F" N (No impact "RxTxtoTrig6 on the UE in G" >= 256. Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
Board
None
None
None
SAAL link
None
Not involved
None
None
SAAL link
None
Not involved
35000
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
RNC
None
FALSE
FALSE NodeB
None
50
Physical 50 channel
None
Not involved
None
None
BSC6900
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
None
PVC
None
Not involved
None
None
Physical channel
None
Not involved
None
None
E1/T1 port
None
BSC6900
None
None
Board
None
BSC6900
1 BSC6900
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
None
SCTP link
None
Not involved
None
None
BSC6900
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
BSC6900
None
None
None
BSC6900
None
None
None
BSC6900
None
1.00E-06
None
BSC6900
None
None
BSC6900
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
DISABLE
None
BSC6900
None
None
None
Not involved
None
None
NodeB
None
N (No impact on the UE in Read & Write idle mode) Not involved
ALL
ALL
BSC6900
None
Not involved
None If this parameter is None set through both the "ADD If this UCELLDRD" parameter is None andthrough set "SET UDRD" both the commands, "ADD the parameter UCELLDRD" set through None and "SET the "ADD UDRD" UCELLDRD" commands, command the parameter takes set through None precedence the "ADD over that set UCELLDRD" through the command "SET UDRD" takes command. precedence
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
BSC6900
None
None
BSC6900
None
None
BSC6900
None
None
RNC
Not involved
OFF
OFF
Cell
N (No impact on the UE in Read & Write idle mode) Not involved
OFF
OFF
RNC
over that set through the N (No impact "SET UDRD" on the UE in command. Read & Write idle mode) Not involved
None
None
RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
RNC
None
None
None
BSC6900
None
None
None
None
None
None
None
None Read & Write When the of The value value of this "NODET" in parameter "ADDsatisfy must UMTS BSC6900 None ADJNODE" is Read & Write the following set to IUPS, relationship: this "MaxCAPSLo parameter is wLoad" > None Adjacent node valid. This "MaxCAPSMi Read & Write parameter dLoad" > is This required when "SharingOutC parameter is the when APSMidLoad" valid "UseOfHcs" Read & Write 10 RNC . the parameter is SERVICE_H set to USED O_BASED_O but not N_RNC_SWI required when TCH DEDICATED NodeB Noneunder Read & Write the the "UseOfHcs" "HoSwitch" parameter is parameter is set to on set to 0 0 Cell NOT_USED. Read & Write through the HO_TO_GSM "SET _SHOULD_NO CORRMALG T_BE_PERFO OWITCH" RM RAB command. Read & Write
None
RNC
Not involved
Not involved
Not involved
Not involved
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
None
BSC6900
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
3 RNC
None
None
60 RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (Impact on the UE in idle Read & Write mode) Not involved N (Impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
-20 RNC CS_SHO_SWI TCH:OFF, -24 HSPA_SHO_S Cell -24 WITCH:OFF, NON_HSPA_S HO_SWITCH: OFF RNC
None
None
None
None
TRUE
TRUE Cell
None
FALSE
FALSE Cell
None
None
Cell
None
None
RNC
This parameter cannot None be set Read & Write to FACH only when the "RrcCause" parameter is None Read & Write set to EMERGCALL EST or MBMSCALLE ST. Read & Write
None
None
SCCP
None
Not involved
None
None
SCCP
None
Not involved
None
None
BSC6900
None
Not involved
TRUE
None
Not involved
None
None
None
The following relationship must be satisfied: "GoldMaxMod The following Read & Write None e" >= relationship "SilverMaxMo must be de" >= satisfied: "CopperMaxM "GoldMaxMod ode". Read & Write e" >=
Not involved
Not involved
"SilverMaxMo de" >= N (No impact "CopperMaxM on the UE in ode". Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
None
None
None
None
When the D3.4 interface type RNC is Iub, transmission type is ATM or dual stack, the RNC D3.4 parameter is When the RT_VBR; interface type transimssion is Iub, type is IP or None IP, the Ethernet port transmission Hybird type is ATM or parameter is IP, the EF. parameter When the is NULL; interface type None None transimssion is Iur, type is dual transmission stack, the type is ATM, parameter is the parameter 15 is RT_VBR; 15 BSC6900 EF; transimssion type is Hybird IP, the IP, the parameter is parameter is BSC6900 EF. LQEF. When the interface type is Iur, 100 transmission BSC6900 100 type is ATM or IP, the parameter is NULL. BSC6900
None
None
None
When the None value of "ITFT" in "ADD TRMMAP" is None IUB or set to IUR or IUPS, this parameter is valid. When the value of "ITFT" in "ADD None TRMMAP" is set to IUB or IUR, this parameter is valid.
Not involved
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
0 BSC6900
None
15
15 BSC6900
0 Cell
This parameter is required when the "UseOfHcs" parameter is set to USED but not required when None Read & Write the "UseOfHcs" parameter is set to NOT_USED. Read & Write
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
None
Physical channel
None
Not involved
Physical 0 channel
None
Not involved
Physical 1 channel
None
Not involved
Physical 2 channel
None
Not involved
Physical 3 channel
None
Not involved
None
None
Physical channel
None
Not involved
80
80 Board
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
70
70 Board
None
B0000
B0000
SCCP
None
None
None
BSC6900
None
None
All
RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
OPEN
None
None
None
None
None
BSC6900
None
70
70 Board
None
60
60 Board
None
70
70 Board
None
75
75 Board
None
60
60 Board
None
65
65 Board
10
10 None
The number of CPU usage sampling None is at Read & Write times least twice the size of "Fast judgement window". Read & Write
None
None
None
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
None
Not involved
None
None
ADJNODE" is set to YES, or the value of "NODET" in "ADD ADJNODE" is set to UNI_AAL2SW ITCH, this parameter is Adjacent node valid. Read & Write Not involved
Not involved
None
None
BSC6900
None
Not involved
None
None
E1/T1 link
None
Not involved
None
None
None
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
None
BSC6900
None
Not involved
None
None
Subsystem
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
BSC6900
None
None
None
BSC6900
None
None
None
None
None
None
None
BSC6900
None
Not involved
None
None
Subsystem
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
None
RNC
None
Not involved
None
None
RNC
None
Not involved
None
OFF
RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
BSC6900
None
None
SCCP
None
None
SCCP
None
None
SCCP
OFF
OFF
Cell
When the None of value This "SPDF" is set parameter is to WNF, this valid when parameter is the valid. HCS_SPD_E Read & Write This ST_SWITCH parameter is ON and depends on "UseOfHcs" is network When the USED in planning. Read & Write value of "ADD "SPDF" is set CELLHCS". to DNF, this The parameter is HCS_SPD_E valid. ST_SWITCH Read & Write in "HoSwitch" When the in "SET value of CORRMALG "SPDF" in OSWITCH". Read & Write "ADD
BSC6900
BSC6900
Not involved
Not involved
WNF
WNF
SCCP
N7DPC" is set to WNF, this N (No impact parameter is on the UE in valid. Read & Write idle mode) Not involved
None
AUTO
BSC6900
255
255 Cell
None
N (Impact on the UE in idle Read & Write mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
RNC
None
None
None
Cell
None
Cell
None
None
RNC
This parameter, "TrafficClass", "UserPriority" and "THP" form an SPI N (No impact mapping on the UE in table. Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
RNC
None
None
None
None
None
70
45
The value of this parameter Ethernet port None must satisfy the following The value of relationship: this "SpucHeavy" parameter BSC6900 None >= satisfy must "SpucLight"; the following The value of 100 >= relationship: this "SpucHeavy" "SpucLight" parameter 70 Cell + "SpucHyst". >= satisfy must "SpucHyst"; the following 100 >= relationship: "SpucHeavy" "SpucHeavy" 5 Cell + "SpucHyst". >= "SpucLight"; "SpucLight" >= 45 Cell "SpucHyst".
Not involved
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
SCCP
None
Not involved
DCH
DCH
RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
FALSE
FALSE RNC
None
15
15 BSC6900
32
32 Cell
This parameter must satisfy None the following Read & Write relationship: "SRBMBR" >= "SRBGBR" Read & Write
None
None
is Iub, type is IP or transmission Hybird IP, the type is ATM or parameter is IP, the EF. parameter When the is NULL; interface type transimssion is Iur, type is dual transmission stack, the type is ATM, parameter is the parameter 512 is RT_VBR;512 Cell EF; transimssion type is Hybird IP, the IP, the parameter is parameter is BSC6900 EF. LQEF. When the interface type is Iur, 100 transmission BSC6900 100 type is ATM or IP, the parameter is NULL. BSC6900
This parameter must satisfy the following When the relationship: value of "SRBMBR" N (No impact "ITFT" in >= on the UE in "ADD "SRBGBR"is Read & Write idle mode) Not involved TRMMAP" set to IUB or IUR, this parameter is valid. Read & Write When the value of "ITFT" in "ADD None TRMMAP" is Read & Write set to IUB or IUR, this parameter is valid. Read & Write N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
0 BSC6900
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
15
15 BSC6900
None
None
None
BSC6900
None
None
None
None
None
None
None
None
None
None
None
Not involved
None
None
None LINE1_8K and E1/T1 port LINE2_8K are most commonly used. None
None
Not involved
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
None
E1/T1 port
60
60 SAAL link
When the value of None "SAALLNKT" Read & Write is set to NNI, this parameter is valid. Read & Write
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
None
None
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
None
None
None
Not involved
None
None
BSC6900
None
Not involved
None
None
BSC6900
None
Not involved
None
None
BSC6900
None
Not involved
None
None
BSC6900
None
Not involved
None
None
Subsystem
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
None
BSC6900
None
Not Invovled
None
None
BSC6900
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
None
BSC6900
None
Not involved
None
None
Subsystem
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
None
None
None
YES
RNC
Valid when "BEQosPerfor N (No impact m" is set to on the UE in YES. Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
NRT
RNC
None
None
400 RNC SRNSR_DSC R_IUR_RESR 60 CE_SWITCH: RNC OFF, SRNSR_DSC R_LOC_SEPR AT_SWITCH:O RNC 5 N, SRNSR_DSC R_PROPG_D ELAY_SWITC 30 RNC H:OFF, SRNSR_DSC R_SEPRAT_D UR_SWITCH: ON RNC
None
None
None
None
This paramter is valid only when None Read & Write "SRNSR_DS CR_SEPRAT _DUR_SWIT CH of None [SrnsrSwitch]" Read & Write in "SET CORRMALG OSWITCH" is set ON. Read & Write
None
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
60 RNC
None
None
None
None
None
DES
None
BSC6900
None
-50
None
N (Impact on the UE in idle Read & Write mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
75
75 Board
None
85
85 Board
None
None
None
RAB
80
80 Board
85
80 Board
0 Cell
None This parameter is required when the "UseOfHcs" Read & Write None parameter is set to USED but not required when None Read & Write the "UseOfHcs" parameter is set to NOT_USED. Read & Write
2 Cell
None
N (Impact on the UE in idle Read & Write mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
None
None
None
none
BSC6900
None
Not involved
None
None
Subsystem
None
Not involved
None
None
BSC6900
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
None
BSC6900
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
BSC6900
None
None
None
BSC6900
None
None
None
None
None
It is recommended None service BSC6900 that the type of signaling link be CBR, the real-time None BSC6900 service be CBR or RTVBR, the non-real-time None be BSC6900 service NRTVBR, and the OAM data link be UBR_PLUS. PVC
None
None
None The following relationship None be must satisfied: This paramter "StaBlkNum5 is valid only A" >= when "Thd5A". "DynShutdow nSwitch" is set to ON_1 This paramter or valid only is ON_2 or ON_3; None when The value of "DynShutdow this nSwitch" is parameter set to ON_2 must fulfill the or ON_3; None following of The value condition: this "StartTime1" parameter < must fulfill the "EndTime1". following condition: "StartTime2" < "EndTime2".
Not involved
None
500 RNC
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
BSC6900
ACTIVE
ACTIVE
Cell
None
None
Cell
None
None
Cell
None
None
Cell
nSwitch" is set to ON_3; The value of this parameter must fulfill the following condition: "StartTime3" N (No impact < on the UE in "EndTime3". Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
20000 RNC
None
20
20 SCCP
None
67
67 SAAL link
None
None
None
BSC6900
None
OFF
OFF
SCCP
None
D16
RNC
32
32 Cell
D384
D384
RNC
512
512 Cell
None This parameter must satisfy the following None relationship: "STREAMMB R" >= "STREAMGB R" This parameter must satisfy the following None relationship: "STREAMMB R" >= "STREAMGB R"
Not involved
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
D16
RNC
None
None
None
BSC6900
None
FALSE
N (No impact on the UE in This paramter None only Read & Write idle mode) Not involved is valid when "TxDiversityIn N (No impact d" is paramter set to on the UE in This TRUE. only Read & Write idle mode) Not involved is valid when "TxDiversityIn d" is set to TRUE. Read & Write Y
Cell
None
None
RAB
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
352
352 None
None
None
None
BSC6900
None
None
None
BSC6900
None
Not involved
FALSE
FALSE Cell
None
Not involved
FALSE
FALSE NodeB
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
FALSE
FALSE Cell
None
FALSE
FALSE NodeB
None
NO
NO
RNC
None
NO
None
None
None
None
RNC
SupportCRTy pe to CR529_SUP PORT or CR529_NOT_ SUPPORT; when "CNProtclVer" in "ADD UCNNODE" None to R6, Read & Write is set there is no SupportCRTy pe that can be set. Read & Write
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
FALSE
FALSE Cell
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
FALSE
FALSE NodeB
None
FALSE
FALSE Cell
None
CLOSE
None
None
None
None
None
BSC6900
None
None
None
BSC6900
None
None
None
None
None
None
None
BSC6900
None
None
None
BSC6900
None
None
None
None
None
Not involved
None
OFF
RNC
When "CNDomainId " in "ADD UCNNODE" is set to CS_DOMAIN, Switch3GPP2 5415CR0125 N (No impact needs to be on the UE in set. Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
YES
YES
SCTP link
None
10
10 SCTP link
None
OFF
OFF
BSC6900
None
0 BSC6900
None
OFF
OFF
BSC6900
None
OFF
OFF
BSC6900
None
OFF
OFF
BSC6900
None
OFF
OFF
BSC6900
None
OFF
OFF
BSC6900
None
0 BSC6900
None
0 BSC6900
None
0 BSC6900
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
ON
None
BSC6900
None
None
None
BSC6900
None
None
None
None
None
None
60 RNC
None
None
None
None
None
MBSC
None
None
None
None
60 RNC
None
None
10 RNC
None
None
None
None
None
None
None
None
None
None
100 RNC
None
None
None
None
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
180 RNC
None
60000
None
1500
None
1500
None
3000
None
1500
None
1200
None
360000
None
360000
None
2000
None
None
D2000
RNC
None
None
D2000
RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
D2000
RNC
None
None
D30
RNC
None
None
None
RNC
None
None
D40
RNC
None
None
5 RNC
None
None
6 RNC
None
None
3 RNC
None
Not involved
None
D0
RNC
T314 should be set greater N (No impact than on the UE in T302*N302 Read & Write idle mode) Not involved T315 should T3212 needs be set greater to be than set when T302*N302 Read & Write "CNDomainId " is set to CS_DOMAIN; T3212 does None Read & Write not need to be set when "CNDomainId " is set to PS_DOMAIN. Read & Write N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (Impact on the UE in idle mode) Not involved
None
D0
RNC
None
D30
RNC
10
10 RNC
None
D600
RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
1200
None
1200
None
1200
None
1200
None
None
10 RNC
-12
-12 Cell
-92
-92 Cell
-12
-12 Cell
-92
-92 Cell
None This parameter is valid when the None Read & Write OVERLAY_S This WITCH is ON. parameter is The when valid OVERLAY_S the None is in Read & Write WITCH OVERLAY_S "HoSwitch" in WITCH is ON. "SET The CORRMALG OVERLAY_S OSWITCH". Read & Write WITCH is in "HoSwitch" in "SET CORRMALG OSWITCH". Read & Write
-12
-12 Cell
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
-92
-92 Cell
None
16
16 Cell
16
16 Cell
This parameter is valid when the OVERLAY_S WITCH is ON. The OVERLAY_S None is in Read & Write WITCH "HoSwitch" in "SET CORRMALG OSWITCH". Read & Write
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
16
16 Cell
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
BSC6900
None
None
None
Configured to 1 when TFsNumber is None RNC 1; Configured to Configured to 0 when 1 when TFsNumber is Transport TFsNumber is 2 or 3 channel 1; Configured to 0 when TFsNumber is 2. Cell
None
None
Not involved
None
None
Not involved
Transport 1 channel
Transport 1 channel
This paramter None only Read & Write Not involved is valid when "TFsNumber" is set to D2 or D3. Read & Write Not involved
Not involved
Not involved
1 Cell
None
Not involved
Transport 2 channel
Transport 2 channel
None This paramter Read & Write Not involved is valid only when "TFsNumber" is set to D3. Read & Write Not involved
Not involved
Not involved
None
None
RNC
1."TbSizeInde x1" < "TbSizeIndex 2" < "TbSizeIndex 1."TbSizeInde 3" << N (No impact x1" "TbSizeIndex on the UE in "TbSizeIndex 4" < Read & Write idle mode) Not involved 2" "TbSizeIndex 1."TbSizeInde 3" << N (No impact x1" "TbSizeIndex on the UE in "TbSizeIndex 4" < Read & Write idle mode) Not involved 2" "TbSizeIndex 1."TbSizeInde 3" << N (No impact x1" "TbSizeIndex on the UE in "TbSizeIndex 4" < Read & Write idle mode) Not involved 2" "TbSizeIndex 3" < N (No impact "TbSizeIndex on the UE in 4" Read & Write idle mode) Not involved
None
None
RNC
None
None
RNC
None
None
RNC
170
None
BSC6900
None
None
Cell
None
None
Cell
10
10 MTP3 link
D60
D60
Cell
D20
D20
Cell
This paramter None only Read & Write This is valid parameter is when required when "CellChoice" the to is set "UseOfHcs" Read & Write 3GCELL. This parameter is parameter is set to USED required when but not the required when "UseOfHcs" Read & Write None the parameter is "UseOfHcs" set to USED parameter is but not set to required when NOT_USED. Read & Write the "UseOfHcs" This parameter is parameter is set toonly valid NOT_USED. Read & Write when
Cell
BSC6900
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
NotUsed
NotUsed
Cell
"NonhcsInd" This is set to is N (Impact on parameter CONFIGURE the UE in idle valid only D. Read & Write mode) Not involved when "NonhcsInd" is set to N (Impact on CONFIGURE the UE in idle D. Read & Write mode) Not involved
NotUsed
NotUsed
Cell
60
60 Cell
OPEN
None
None
45 None
None
0 None
None
D3
D3
Cell
D2
D2
Cell
480
480 Cell
480
480 Cell
480
480 Cell
None
100 RNC
nitForDlBasic Meas" is set to TEN_MSEC,a nd it must satisfy the following relationship: "TenMsecFor DlBasicMeas" < None Read & Write "IntraFreqLdb PeriodTimerL en" x 1000/2 (See "SET None Read & Write ULDCPERIO D" and "SET USATLDCPE RIOD"); None "TenMsecFor Read & Write DlBasicMeas" < "PucPeriodTi This merLen" x None parameter is Read & Write 1000/2 (See valid when "SET "TpenaltyHcs ULDCPERIO Reselect" is D" and "SET This not set to D0. Read & Write USATLDCPE parameter is RIOD"); valid when "TenMsecFor "TpenaltyHcs DlBasicMeas" Reselect" is < set to D0. Read & Write not "LdrPeriodTim erLen" x 1000/2 (See "SET None ULDCPERIO Read & Write D" and "SET USATLDCPE RIOD"); "TenMsecFor Read & Write None DlBasicMeas" < "OlcPeriodTi merLen"/2 None"SET Read & Write (See ULDCPERIO This D" and "SET parameter is USATLDCPE valid only RIOD"). Read & Write when
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (Impact on the UE in idle mode) Not involved N (Impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
20 RNC
"ChoiceRprtU This nitForDlOlcM N (No impact parameter is eas" is set to on the UE in valid only TEN_MSEC. Read & Write idle mode) Not involved when "ChoiceRprtU nitForDlOlcM N (No impact eas" is set to on the UE in TEN_MSEC. Read & Write idle mode) Not involved
None
100 RNC
None
100 RNC
None
100 RNC
None
100 RNC
None
100 RNC
satisfy the following This relationship: parameter is "TenMsecFor valid only UlBasicMeas" when < "ChoiceRprtU "LdrPeriodTim This nitForHsdpaR erLen" * is parameter ateMeas" is 1000/2 (See valid only set to "SET when TEN_MSEC. Read & Write ULDCPERIO "ChoiceRprtU This "SET D" and nitForHsdpaP parameter is USATLDCPE wrMeas" is valid only RIOD"); set to when "TenMsecFor TEN_MSEC. Read & Write "ChoiceRprtU UlBasicMeas" nitForHsupaR < ateMeas" is "OlcPeriodTi set to merLen" /2 TEN_MSEC. Read & Write (See "SET ULDCPERIO This D" and "SET parameter is USATLDCPE valid only RIOD") . Read & Write when "ChoiceRprtU nitForUlOlcM The is set to eas"value of the parameter Read & Write TEN_MSEC. must satisfy the function below: "NFastSpdEst None "*"TSlowSpdE Read & Write st" >= "NSlowSpdEs This t"*"TFastSpd parameter is Est". only Read & Write valid
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
20 RNC
480
480 Cell
180
180 Cell
None
EXISTS
Physical channel
when "SlotFormat" is equal to or more than D8. Read & Write Not involved
Not involved
None
None
Transport channel
None
Not involved
None
None
Transport channel
None
Not involved
None
None
BSC6900
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
BSC6900
None
None
None
BSC6900
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
None
BSC6900
None
None
None
None
None
None
None
BSC6900
None
280 RNC
None
None
RNC
None
None
RNC
None
None
RNC
The following relationship None be Read & Write must satisfied: "StaBlkNum5 This A" >= parameter, The following "Thd5A". "TrafficClass", relationship Read & Write "UserPriority", must be and "SPI" satisfied: form an <= "ThdEa"SPI The following mapping "ThdEb". relationship Read & Write table. This must be is parameter satisfied:when required "ThdEa" <= the "ThdEb". "TrafficClass" Read & Write parameter is set to INTERACTIV E. Read & Write
Medium
Medium
RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
Low
Low
RNC
None
Low
Low
RNC
None
Low
Low
RNC
None
Low
Low
RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
Low
Low
RNC
None
High
High
RNC
None
High
High
RNC
None
High
High
RNC
None
High
High
RNC
None
High
High
RNC
Medium
Medium
RNC
Medium
Medium
RNC
Medium
Medium
RNC
Medium
Medium
RNC
None
None
RNC
This parameter is required when None Read & Write the "TrafficClass" parameter is set to INTERACTIV Read & Write None E; The mapping relationship between the None Read & Write traffic handling priority value of INTERACTIV Read & Write None E service and its corresponding class can be None Read & Write set through command "SET UIAVUSERT HPCLASS". Read & Write
None
None
BSC6900
None
Not involved
NOLIMIT
NOLIMIT
BSC6900
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
BSC6900
None
2000
Not involved
3000
3000 None
None
Not involved
Not involved
None
None
This paramter 2 Ethernet port None only Read & Write Not involved is valid when "Priority(BLK CELL)" is set Cell to NORMAL. Read & Write Not involved
Not involved
Not involved
10
10 AAL2 path
None
AAL2 path
5000
This parameter is 4 Ethernet port required when Read & Write None the "RlcMode" parameter is set to AM and the 0 Cell None "AmRlcCfgPa Read & Write ra" parameter is set to FLOWCONT 5000 RAB ROL_PARA. Read & Write
Not involved
Not involved
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
D0
D0
Cell
This parameter is valid when "InterFreqRep ortMode" is set to N (No impact EVENT_TRIG on the UE in GER. Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
D320
D320
Cell
D1280
D1280
Cell
0 Cell
0 Cell
0 Cell
None This parameter is valid when "InterRatRepo None is set Read & Write rtMode" This to parameter is PERIODICAL valid when _REPORTIN "InterFreqRep G. Read & Write ortMode" is This set to parameter is PERIODICAL valid when _REPORTIN "InterRatRepo G. rtMode" is set Read & Write to PERIODICAL _REPORTIN G. Read & Write This parameter is required when Read & Write None the "RlcMode" parameter is This set to AM and parameter is the required when Read & Write None "AmRlcCfgPa the "RlcMode" ra" parameter parameter is is set to and set to AM FLOWCONT the ROL_PARA. Read & Write "AmRlcCfgPa
D240
D240
RAB
D2560
D2560
RAB
2 RAB
14
14 RAB
ra" parameter is set to N (No impact FLOWCONT on the UE in ROL_PARA. Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
BSC6900
None
None
None
BSC6900
None
None
None
BSC6900
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
BSC6900
None
None
None
BSC6900
None
None
None
BSC6900
None
None
None
BSC6900
None
None
None
None
None
The TRMMAP index is BSC6900 None configured by Read & Write setting the value of "TMI" The TRMMAP in "ADD index is Adjacent node TRMMAP".by Read & Write configured
Not involved
Not involved
None
None
setting the value of "TMI" N (No impact The TRMMAP in "ADD on the UE in index is Adjacent node TRMMAP".by Read & Write idle mode) Not involved configured setting the value of "TMI" N (No impact in "ADD on the UE in Adjacent node TRMMAP". Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
0 None
BSC6900
None
0 None
BSC6900
None
12000
None
60000
None
None
BSC6900
None
None
RNC
None
None
RNC
NodeB
3. If the NodeB is configured with adjacent nodes through "ADD NCP", the transmission type cannot be modified. 4. If the None Read & Write NodeB is configured with the electrical None number Read & Write serial through "ADD NODEBESN" and the transmission Read & Write None type is supposed to be modified to ATM None transmission, Read & Write the transmission type cannot be modified. Read & Write
Not involved
Not involved
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
Not involved
Not involved
None
None
BSC6900
None
N (No impact on the UE in Read & Write idle mode) Not involved
10
10 Cell
None
Not involved
None
None
Transport channel
None
Not involved
35
35 Cell
None
Not involved
None
None
Transport channel
1 Cell
This paramter is valid only when None "DynShutDow Read & Write nType" is set to ConditionalSh utDown. Read & Write
Not involved
Not involved
None
None
BSC6900
None
N (No impact on the UE in Read & Write idle mode) Not involved
D0
D0
Cell
None
N (Impact on the UE in idle Read & Write mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
60
60 Board
None
60
67 Board
None
50
50 Board
None
50
62 Board
None
ON
ON
Board
None
None
None
RAB
None
None
RNC
This parameter, None "UserPriority", Read & Write "THP", and "SPI" form an SPI mapping table. Read & Write
None
None
RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
RNC
None
None
None
RNC
None
None
None
RNC
None
None
None
RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
Cell
None
None
None
RNC
None
None
Not involved
10
None
None
None
None
None
None
None
None
None
None
When the None value of "NODET" in "ADD ADJNODE" is 10 NodeB None IUB, set to IUR, IUCS, or IUPS, this parameter is Adjacent node When the valid. value of "ITFT" in "ADD TRMMAP" is When the IP path None IUB, set to of value IUR, IUCS, "ITFT" in this "ADD parameter is TRMMAP" is When the BSC6900 valid. IUB, set to of value IUR or in "ITFT" IUCS, this "ADD parameter is TRMMAP" is BSC6900 valid. IUB, set to IUR or IUCS, this parameter is BSC6900 valid. 1 Cell
N (No impact on the UE in Read & Write idle mode) Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Transport 0 channel
None
Not involved
None
None
Physical channel
None
Not involved
3 Cell
None
Not involved
1 Cell
None
Not involved
None
None
RAB
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (Impact on the UE in idle Read & Write mode) Not involved N (Impact on the UE in idle Read & Write mode) Not involved N (Impact on the UE in idle Read & Write mode) Not involved
None
None
RAB
None
None
None
RAB
None
10
10 Cell
None
1 Cell
None
255
255 Cell
None
255
255 Cell
None
None
None
None
None
Not involved
None
D160
RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved
D320
D320
Cell
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
D1280
RNC
None
D640
D640
Cell
None
D640
D640
Cell
None
D640
D640
Cell
None
D640
D640
Cell
None
D640
D640
Cell
None
D640
D640
Cell
None
D320
D320
Cell
None
D1280
D1280
Cell
D0
D0
Cell
This parameter is valid when None "InterRatRepo Read & Write rtMode" is set to EVENT_TRIG GER. Read & Write
D640
D640
Cell
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
D240
RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
D240
RNC
None
None
None
Not involved
None
None
BSC6900
None
Not involved
None
None
Not involved
50
50 Cell
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
0 BSC6900
None
2 BSC6900
None
None
None
BSC6900
None
Not involved
0 IMA group
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
0 UNI link
None
2 PPP link
None
Not involved
2 None
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
0 None
None
None
None
This paramter 2 IP logical port None only Read & Write is valid when "CellChoice" is set to RNC 3GCELL. Read & Write
Not involved
Not involved
None
None
Not involved
None
None
None
None
Not involved
None
None
Not involved
None
None
Cell
None
Cell
None
None
E1/T1 port
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
E1/T1 port
None
None
None
PPP link
None
Not involved
None
None
MP link
None
None
E1/T1 port
None
None
BSC6900
240
240 Cell
None
None
None
30
30 Ethernet port
None
OFF
RNC
64
64 Ethernet port
64
64 Ethernet port
None
None
None
None
When "GRPT" in None Read & Write "ADD RSCGRP" is set to ATM or The value of is "BWMODE" the to set parameter Read & Write None must satisfy FULL_DUPLE thethis X, function below: parameter is "NFastSpdEst valid;The sum None "*"TSlowSpdE Read & Write of "TxBw" and st" >= in "RxBw" "NSlowSpdEs "ADD t"*"TFastSpd RSCGRP" of Est". class Read & Write upper This RSCGRP can parameter is not less than valid when the "TxBw" is "TstSwitch" andto ON. in Read & Write set "AllBw" "ADD RSCGRP"of lower class RSCGRP;The None in Read & Write "TxBw" "ADD RSCGRP" of upper class RSCGRP can Read & Write None not less than the "TxBw" in "ADD RSCGRP" of None class Read & Write lower RSCGRP, and the "RxBw" in "ADD None Read & Write RSCGRP" of upper class RSCGRP can not less than None the "RxBw" in Read & Write "ADD RSCGRP" of lower class RSCGRP. Read & Write
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
None
None
Not involved
None
None
Cell
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
None
Cell
None
Cell
500
30
None
None
None
None
When the value 500 Ethernet port None of "CARRYT" is When the set to of value IMA, UNI, "CARRYT" in FRAATM, "ADD 30 Ethernet port None NCOPT, or AAL2PATH" ATMLOGICP is set to UNI, ORT, this IMA, parameter is FRAATM, SAAL link valid. NCOPT, or ATMLOGICP ORT, this parameter is AAL2 Path valid.
Not involved
Not involved
N (No impact on the UE in Read & Write idle mode) Not involved
AAL2 path
None
None
IPoA PVC
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
None
BSC6900
None
Not involved
None
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
None
BSC6900
None
None
Cell
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
None
Cell
None
Cell
None
None
Cell
None
None
Cell
When "UARFCNUpli nkInd" is set to TRUE, this parameter need to manual configure;or else need to automatic None configure with Read & Write the restriction relation UL and DL frequency. Read & Write
Cell
None
None
Cell
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
None
Cell
None
Cell
5000
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
None
None
None
None
None
None
None
None
RNC
None
None
None
RNC
None
None
5000 RNC
None
None
5000 RNC
None
Guests
Guests
BSC6900
None
1000
None
Not involved
90 None
None
None
50 RNC
This parameter is valid only None Read & Write when "AFSetObj" is set to GOLD, SILVER, or COPPER. Read & Write
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
D320
D320
Cell
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
D320
D320
Cell
None
D320
D320
Cell
D320
D320
Cell
D240
D240
Cell
None
10 RNC
None
D6
RNC
D8
D8
RNC
D8
D8
Cell
None If this parameter is set through both the "SET None UFRCCHLTY If this PEPARA" is This parameter andthroughis parameter set "ADD UCELLFRC" valid the "SET both only None commands, when UFRCCHLTY the parameter "AFSetObj" is PEPARA" set through andto GOLD, "ADD the "ADDor SILVER, UCELLFRC" UCELLFRC" COPPER. commands, command the parameter takes set through precedence the "ADD over that set UCELLFRC" None the through command "SET takes UFRCCHLTY precedence PEPARA" over that set command. through the "SET UFRCCHLTY PEPARA" command.
D64
D64
RNC
when the DCCC_SWIT CH under the "Chswitch" parameter is set to on through the "SET CORRMALG N (No impact OSWITCH" on the UE in command. Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
D608
D608
RNC
None
D640
D640
Cell
None
D1280
D1280
Cell
None
D2560
D2560
Cell
None
D1280
D1280
Cell
None The value of this None parameter must satisfy the following relationship: "UlOlcTrigThd None "(See "ADD UCELLLDM") >= "UlCellTotalT None hd"; "UlCellTotalT hd" > "UlNonCtrlTh dForHo"
D240
D240
Cell
None
5 RNC
0 Cell
83
83 Cell
SF/2
SF/2
NodeB
None
3 Cell
None
3 NodeB
3 Cell
3 NodeB
None
D64
RNC
None
SILENT
RAB
D64
D64
Cell
D64
D64
RNC
SF16
SF16
Cell
None the When value of "UlMidRateCa For the BE lc" is with the users HAND_APPO Read & Write None same INT, the "TrafficClass", following "THPClass" relationship and must be "BearType" None Read & Write satisfied: values, make "UlDcccRateT sure: hd" <= of "UlGBR" "UlMidRateTh GOLD users d". ("UserPriority" Read & Write is set to This GOLD) >= parameter is "UlGBR" of availableusers SILVER ifof Read & Write None The value the value of ("UserPriority" this "BEQosPerfor is set to parameter m" in "SET SILVER) >= must satisfy UQOSACT" is "UlGBR" of the following Read & Write YES. COPPER relationship: users "UlHoCeResv ("UserPriority" Sf" >= is set to "UlLdrCreditSf COPPER). Read & Write ResThd". (For detailed information, refer to "ADD UCELLLDR".) Read & Write
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
0 Cell
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
SCHEDULED
SCHEDULED RNC
None
10 RNC
This parameter is valid only None Read & Write when "AFSetObj" is set to GOLD, SILVER, or COPPER. Read & Write
200000
200000 Cell
None
N (No impact on the UE in Read & Write idle mode) Not involved
20
20 Cell
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
1 Cell
None
None
5 RNC
None
1 Cell
None
1 NodeB
SF8
SF8
Cell
The value of this None Read & Write parameter must not be larger than "UlHoCeResv Sf". Read & Write
SF8
SF8
NodeB
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
NoAct
NoAct
Cell
None
NoAct
NoAct
Cell
None
NoAct
NoAct
NodeB
None
None
BERateRed
BERateRed
NodeB
None
NoAct
NoAct
Cell
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
NoAct
NoAct
NodeB
1 Cell
1 NodeB
45
45 Cell
None The value of this parameter must satisfy the following Read & Write None relationship: "UlLdrTrigThd " >= "UlLdrRelThd" None Read & Write ; "UlOlcRelThd " >= "UlLdrRelThd" . Read & Write
BERateRed
BERateRed
Cell
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
NoAct
NoAct
NodeB
None
NoAct
NoAct
Cell
None
NoAct
NoAct
Cell
None
NoAct
NoAct
NodeB
None
NoAct
NoAct
Cell
None
NoAct
NoAct
NodeB
None
55
55 Cell
D64
D64
NodeB
D19
D19
Cell
None
HAND_APPOI NT RNC
None
D128
RNC
None
1000 RNC
None
1000 RNC
None
100 RNC
75
75 Cell
80
80 Cell
75
75 Cell
60
60 Cell
"UlOlcTrigThd "> "UlLdrTrigThd "; "UlNonCtrlTh dForOther"(S ee "ADD UCELLCAC") >= "UlLdrTrigThd The ". parameter is Read & Write valid when The "UlRateUpAdj parameter is Level" in valid when "SET None "UlMidRateCa Read & Write UDCCC" is lc" invalue of Theto"SET set valueis The UDCCC" of this 3_Rates, or this to set parameter "UlRateDnAdj parameter HAND_APPO None satisfy Read & Write must in Level" the must satisfy INT, and the following "SET the following following relationship: UDCCC" is relationship: relationship "UlCellTotalT set tobe "UlNonCtrlTh must hd" > 3_Rates.> of Read & Write The value dForHo" satisfied: "UlNonCtrlTh The this following "UlNonCtrlTh "UlDcccRateT dForHo" ; relationship parameter dForAMR"; hd" <= "UlNonCtrlTh must be must satisfy "UlNonCtrlTh "UlMidRateTh dForHo" > satisfied: > the following Read & Write dForAMR" d". "UlNonCtrlTh "UlModeChan relationship: "UlNonCtrlTh The following dForAMR"; geTimerLen" "UlNonCtrlTh dForOther"; relationship "UlNonCtrlTh <= be > dForHo" MAX("UlNonC must dForHo" > "DlModeChan "UlNonCtrlTh trlThdForHo", satisfied: "UlNonCtrlTh Read & Write geTimerLen". dForNonAMR "UlNonCtrlTh "UlModeChan dForNonAMR "; dForAMR", geTimerLen" "; This "UlNonCtrlTh <= MAX("UlNonC parameter is dForNonAMR "DlModeChan trlThdForHo", valid only " ",> geTimerLen". Read & Write "UlNonCtrlTh when "UlNonCtrlTh The value of dForAMR", is "AFSetObj" > dForOther"; dForOther") this "UlNonCtrlTh set to GOLD, MAX("UlNonC "UlLdrTrigThd parameter dForNonAMR SILVER, or trlThdForHo", " > satisfy must ", COPPER. "UlNonCtrlTh "UlLdrRelThd" Read & Write the following "UlNonCtrlTh dForAMR", (For detailed> relationship: dForOther") "UlNonCtrlTh information, MAX("UlNonC "UlLdrTrigThd dForNonAMR refer to "ADD trlThdForHo", "> ", UCELLLDM"). Read & Write "UlNonCtrlTh "UlLdrRelThd" "UlNonCtrlTh dForAMR", (For detailed> dForOther") "UlNonCtrlTh information, "UlLdrTrigThd dForNonAMR refer to "ADD "> ", UCELLLDM"). Read & Write "UlLdrRelThd" "UlNonCtrlTh (For detailed> dForOther") information, "UlLdrTrigThd refer to "ADD "> UCELLLDM"). Read & Write "UlLdrRelThd" (For detailed information, refer to "ADD UCELLLDM"). Read & Write
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
5 RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
3 Cell
3 Cell
None
D3
RNC
85
85 Cell
0 Cell
None
100 RNC
95
95 Cell
None The value of this parameter must satisfy the following Read & Write None relationship: "UlOlcTrigThd " >= value of The "UlOlcRelThd this None Read & Write "; parameter "UlOlcRelThd must satisfy " >=following the "UlLdrRelThd" relationship: . "UlOlcTrigThd Read & Write "> "UlLdrTrigThd "; "UlOlcTrigThd Read & Write None " >= "UlOlcRelThd "; "UlOlcTrigThd None Read & Write " >= "UlNonCtrlTh dForHo"(See "ADD UCELLCAC"). Read & Write
1 Cell
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
1 NodeB
None
1 Cell
None
1 NodeB
None
None
NO
RNC
Valid when "AMRQosPerf N (No impact orm" is set to on the UE in YES. Read & Write idle mode) Not involved Valid when "AMRQosPerf N (No impact orm" is set to on the UE in YES. Read & Write idle mode) Not involved Valid when "AMRQosPerf N (No impact orm" is set to on the UE in YES. Read & Write idle mode) Not involved This parameter is Nonewhen Read & Write valid the "VPQosPerfor m" is set to YES. Read & Write N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
NO
RNC
None
NO
RNC
20
20 Cell
None
NO
RNC
None
NO
RNC
Valid when "AMRQosPerf N (No impact orm" is set to on the UE in YES. Read & Write idle mode) Not involved Valid when "AMRQosPerf N (No impact orm" is set to on the UE in YES. Read & Write idle mode) Not involved Valid when "AMRQosPerf N (No impact orm" is set to on the UE in YES. Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
NO
RNC
None
NO
RNC
None
3_Rates
RNC
None
None
3_Rates
RNC
None
D64
D64
Cell
None
10 RNC
This parameter is valid only None Read & Write when "AFSetObj" is set to NOPRIORITY . Read & Write
SCHEDULED
SCHEDULED RNC
None
100 RNC
This parameter is valid only when None "AFSetObj" is Read & Write set to GGOLD, SILVER, or COPPER. Read & Write
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
D256
D256
RNC
None The following relationship None be mustfollowing The satisfied: relationship "UlThd6A1" must be <= satisfied: "UlThd6B1". "UlThd6A2" The following <= relationship "UlThd6B2"; must be "UlThd6A2" > satisfied: "UlThd6B1". "UlThd6A1" <= "UlThd6B1"; The following "UlThd6A2" > relationship "UlThd6B1". must be
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
NONSCHEDULED
NONSCHEDULED RNC
None
None
RNC
None
None
RNC
None
None
RNC
None
None
RNC
80
80 Cell
1 RNC
satisfied: "UlThd6A2" <= This "UlThd6B2". Read & Write parameter can only be set to 1 when the None "PwrCtrlAlg" Read & Write parameter is set to ALGORITHM 2. Read & Write
D640
D640
Cell
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
D640
D640
Cell
None
D240
D240
Cell
None
None
E1/T1 port
None
None
Cell
None
None
Cell
None
None
Cell
None
None
Cell
None
None
Cell
None
None
Cell
None
None
UNI link
None
2 RNC
None This parameter is valid when the None "CellLocCfgTy Read & Write This pe" is set to parameter is BOTH or valid when CELL_CENT the ER. "CellLocCfgTy Read & Write This pe" is set to parameter is BOTH or valid when CELL_CENT the ER. "CellLocCfgTy Read & Write This pe" is set to parameter is BOTH or valid when CELL_CENT the ER. "CellLocCfgTy Read & Write This pe" is set to parameter is BOTH or valid when CELL_CENT the ER. "CellLocCfgTy Read & Write This pe" is set to parameter is BOTH or valid when CELL_CENT The the value of ER. this "CellLocCfgTy Read & Write parameter pe" is set to must be BOTH or smaller than CELL_CENT the ER.value of Read & Write the "RecountingP eriod" parameter None the Read & Write under "SET the When URNCMBMS value of PARA" "IsROOTNOD command. Read & Write E" in "ADD
N (No impact on the UE in Read & Write idle mode) Not involved
Not involved
Not involved
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
None
ADJNODE" is set to NO, this When parameter is "ISFIRSTCLA Adjacent node valid. in "ADD Read & Write Not involved SSE" RSCGRP" is Transmission set to NO, this resource parameter is group valid. Read & Write Not involved
Not involved
None
None
Not involved
None
None
None
None
Not involved
None
None
None
None
Not involved
None
None
Cell
None
Not involved
None
None
Cell
None
Not involved
None
None
Cell
None
Not involved
None
None
Cell
None
Not involved
None
None
Cell
None
Not involved
None
None
Cell
None
Not involved
None
None
Cell
None
Not involved
None
None
Cell
None
Not involved
None
None
RNC
None
Not involved
None
None
RNC
None
Not involved
None
None
Cell
None
Not involved
-12
-12 Cell
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
-12
-12 Cell
-92
-92 Cell
-97
-97 Cell
-12
-12 Cell
-13
-13 Cell
-92
-92 Cell
-107
-107 Cell
None This This parameter is parameter is valid when valid when the the None OVERLAY_S Read & Write OVERLAY_S WITCH is ON WITCH is ON. and The "MeasQuantit OVERLAY_S yOf3A" is None is in Read & Write WITCH This CPICH_EC/N This "HoSwitch"is parameter O or AUTO.in parameter is "SET valid when The when valid CORRMALG the OVERLAY_S the OSWITCH". Read & Write OVERLAY_S WITCH is in OVERLAY_S WITCH is ON "HoSwitch" in WITCH is ON. and "SET The "MeasQuantit CORRMALG OVERLAY_S yOf3A" is OSWITCH". Read & Write This WITCH is in CPICH_RSC parameter is "HoSwitch" in P or AUTO. valid "SETwhen The "InterRatRepo CORRMALG OVERLAY_S rtMode" in OSWITCH". Read & Write WITCH is in "SET "HoSwitch" in UINTERRAT "SET HOCOV" or CORRMALG "ADD OSWITCH". Read & Write UCELLINTER RATHOCOV" is set to EVENT_TRIG GER. Read & Write This parameter is valid when None Read & Write the "MeasQuantit yOf3A" is CPICH_EC/N O or AUTO. Read & Write
-12
-12 Cell
-13
-13 Cell
-92
-92 Cell
-107
-107 Cell
This parameter is valid when None Read & Write the "MeasQuantit yOf3A" is CPICH_RSC P or AUTO. Read & Write
N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
None
None
RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved N (No impact on the UE in idle mode) Not involved
Disable
Disable
BSC6900
None
NOT_USED
NOT_USED
Cell
None
NOT_USED
NOT_USED
Cell
None
ALL_USER
ALL_USER
Cell
None
None
5 RNC
None
None
90 RNC
None
None
RNC
This parameter, None "TrafficClass", Read & Write "THP", and "SPI" form an SPI mapping table. Read & Write
None
None
RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
RNC
None
None
None
RNC
None
None
BSC6900
None
None
PVC
None
None
AAL2 Path
None When the value of "CARRYT" in "ADD None Read & Write AAL2PATH" is set to UNI, IMA, FRAATM, None Read & Write NCOPT, or ATMLOGICP ORT, this parameter is valid. Read & Write
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved
Not involved
Not involved
AAL2 path
DISABLE
DISABLE
IP path
None
IP path
None
None
BSC6900
None
Not involved
DISABLE
DISABLE
SCTP link
None
SCTP link
DISABLE
DISABLE
SCTP link
None
SCTP link
None
None
BSC6900
None
BSC6900
None
None
Not involved
None
None
BSC6900
None
BSC6900
None
None
BSC6900
None
BSC6900
None
None
None
IP, the parameter is parameter is EF. NULL; When the transimssion interface type type is is Iur, dual stack, the transmission parameter is type is ATM, EF; the parameter transimssion is RT_VBR; type is Hybird When the IP, the type BSC6900 interface None parameter is Iu-CS, is LQEF. transmission When ATM, type isthe interface type the parameter 70 is Iur, RT_VBR; 70 BSC6900 transmission transimssion ATM or type is IP, the IP, the parameter is parameter is BSC6900 EF. NULL. When the interface type is Iu-CS, 100 transmission BSC6900 100 type is ATM or IP, the parameter is NULL. BSC6900
When None the value of "ITFT" in "ADD TRMMAP" is None IUB or set to IUR or IUCS, this parameter is valid. When the value of "ITFT" in "ADD None TRMMAP" is set to IUB or IUR, this parameter is valid.
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
0 BSC6900
None
70
70 BSC6900
None
DCH
DCH
RNC
None
None
OPEN
None
None
None
28 None
None
None
20 None
None
None
OPEN
None
None
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in idle mode) Not involved
57 None
None
42 None
None
None
None
BSC6900
None
None
AAL2 Path
None When the value of "CARRYT" in "ADD None Read & Write AAL2PATH" is set to UNI, IMA, FRAATM, None Read & Write NCOPT, or ATMLOGICP ORT, this parameter is valid. Read & Write
Not involved
Not involved
AAL2 path
FALSE
FALSE Cell
None
N (No impact on the UE in Read & Write idle mode) Not involved
FALSE
FALSE Cell
None
Cell
None
NO
RNC
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
40 RNC
None
None
100 RNC
None
None
60 RNC
None
None
200 RNC
None
None
3000 RNC
Valid when "AMRQosPerf N (No impact orm" is set to on the UE in YES. Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
OPEN
None
None
None
NOLIMIT
NOLIMIT
BSC6900
None
0 Cell
None
0 Cell
None
0 Cell
None
None
None
None
None
Not involved
None
100(UNI), 256(NNI)
SAAL link
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
None
None
BSC6900
None
M3UA_ASP
M3UA_ASP
SCCP
None
Not involved
Active
Active
BSC6900
None
Not involved
None
None
E1/T1 port
None
BSC6900
None
None
Board
None
N (No impact on the UE in Read & Write idle mode) Not involved
None
None
3 RNC
This parameter None an Read & Write defines offset relative to the "NCountingTh d" parameter. Read & Write
Not involved
Not involved
5 Board
None
N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved N (No impact on the UE in Read & Write idle mode) Not involved
60
50 Board
None
None
180 RNC
None
GMT+0800
None
BSC6900
None
Interruption Duration(Min) Validation of Modification Caution Impact on Radio Network Performance Introduced in Version Attribute The parameter modification Versions has no impact earlier than on the BSC6900 Not involved None equipment. None V900R011 Radio The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Not involved
None
Transport
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
Radio
Not involved
Not involved
None
Not involved None The parameter modification has no impact on the equipment. None
Radio
Equipment
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Not involved
None
Transport
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
modification Versions has no impact earlier than If the value is BSC6900 on the set too small, V900R011 None equipment. None the UEs on the cell edge Versions cannot receive earlier than the acquisition BSC6900 None Not involved None V900R011 indication properly. This Versions problem earlier than affects the BSC6900 None Not involved coverage of None V900R011 the downlink Versions common channel and earlier than BSC6900 furthermore None Not involved None the coverage V900R011 of the cell. If Versions the value is The parameter earlier than set too great, BSC6900 cannot be it causes modified. Not involved None The parameter interference to V900R011 modification other Versions has no impact channels, earlier than on the occupies the BSC6900 None equipment. V900R011 The parameter None downlink modification transmit Versions has no impact power, and earlier than on the affects the cell BSC6900 None equipment. capacity. V900R011 This parameter cannot be modified. Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Radio
Radio
Equipment
Equipment
Radio
Not involved
Not involved
None
Not involved None The parameter modification has no impact on the equipment. None
Radio
Equipment
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
At the early stage of The parameter network modification construction, Versions has no impact or when the earlier than on the traffic model of BSC6900 equipment. subscribers in V900R011 The parameter None modification a cell is not Versions has no impact fixed, the earlier than parameter can BSC6900 on the be set to equipment. V900R011 The parameter None Automatic to modification have the Versions has no impact HSDPA earlier than on the channel codes BSC6900 equipment. V900R011 be The parameter None automatically Versions modification has no impact allocated. If earlier than the traffic on the BSC6900 model equipment. None of The parameter subscribers in V900R011 modification a cell is fixed Versions has no impact and known, earlier than on the the parameter BSC6900 equipment. can be The parameter None set to V900R011 modification Manual to Versions has no impact select the earlier than static on the BSC6900 allocation equipment. None The parameter mode. Manual V900R011 modification allocation Versions has no impact leads to earlier than on the restriction of BSC6900 equipment. The parameter None code V900R011 HSDPA modification resource or Versions has no impact leaves earlier than on the HSDPA code BSC6900 equipment. The parameter resource idle. V900R011 modification has no impact on the equipment. None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Equipment
Equipment
Equipment
Equipment
Radio
Transport
Radio
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. None
Equipment
Not involved
None
Equipment
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Versions earlier than BSC6900 None The longer the V900R011 UL AMRC Versions timer is, the earlier than less frequently BSC6900 the AMRC None V900R011 mode is Versions adjusted. In addition, the earlier than BSC6900 response to None measurement V900R011 reports Versions becomes earlier than slower BSC6900 accordingly. V900R011
Radio
Radio
Radio
Radio
Not involved
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Not involved
Transport
Not involved
Transport
Not involved
None
Transport
Not involved
None
Equipment
Not involved
None
Not involved
None
Equipment
Not involved
None
Not involved
None
Equipment
Not involved
None
Not involved
None
Equipment
Not involved
None
Not involved
None
Equipment
Not involved
None
Not involved
None
Equipment
Not involved
None
Not involved
None
Equipment
Not involved
None
Not involved
None
Equipment
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Equipment
BSC6900 V900R011
Transport
Not involved
None
BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Transport
Not involved
None
Radio
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved Interrupt the service until the correct gateway is set Not involved or the port swapping or the changing of IP route is finished.
None
Radio
To modify this modification parameter, run has no impact on the "STP None GATEWAYCH equipment. The parameter None K" first andthis modification To modify then "STR run has no impact parameter, GATEWAYCH on the "STP K". GATEWAYCH equipment. The parameter None K" first and then "STR GATEWAYCH K". modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
Transport
Not involved
Transport
Not involved
None
Equipment
Not involved
Not involved
If the transmission type of Node is IUB-ATM, [next hop IP If the None address] must transmission be the peer IP type of Node address of the is IUB-ATM, configured [next hop IP IPoA PVC. address] must be the peer IP address of the configured IPOA PVC.
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Equipment
Not involved
Equipment
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
Equipment
Not involved
None Negotiation can succeed only when the None configuration is consistent Negotiation on the local can succeed and peer the only when ends. configuration is consistent Negotiation on the local can succeed and peer the only when ends. configuration is consistent Negotiation on the local can succeed and peer the only when ends. configuration is consistent Negotiation on the local can succeed and peer the only when ends. configuration is consistent on the local and peer ends.
BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Not involved Interrupt the service until negotiate successfully again. the Interrupt service until negotiate successfully again. the Interrupt service until negotiate successfully again. the Interrupt service until negotiate successfully again. the Interrupt service until negotiate successfully again.
Equipment
Transport
Transport
Transport
Transport
Transport
Interrupt the service until negotiate successfully again. the Interrupt service until negotiate successfully again. the Interrupt service until negotiate successfully again. the Interrupt service until negotiate successfully again.
Negotiation can succeed only when the configuration is consistent Negotiation on the local can succeed and peer the only when ends. The port can configuration be set to the is consistent Negotiation DOWNlocal on the or UP can succeed state when and peer the onlyparameter this when ends. configuration is modified. If is consistent the on the local negotiation and peer the modes on ends.and peer local end are not consistent, the service can be interrupted.
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Transport
Transport
Transport
Not involved
None
Equipment
Not involved If the mode is not consistent, will interrupt service until it is consistent.
modification has no impact on the None mode is equipment. If the The parameter None not consistent, modification will interrupt has no impact service until it on the is consistent. equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Equipment
BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. None
Equipment
Equipment
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Not involved
Not involved
Not involved
Not involved
Each None backplane board 8K modification clock has only has no impact one clock on the Each source. None You equipment. backplane The parameter None are not board 8K allowed toonly modification clock has turn has no impact on the same one clock on the backplane source. You equipment. None 8K board The parameter None are not clock switch modification allowed to turn for the same has no impact on multiple interface on the backplane boards. equipment. board 8K The parameter None clock switch for multiple interface boards. modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None
Equipment
Equipment
Equipment
Equipment
Not involved
Equipment
Not involved
None
Radio
Not involved
None
Equipment
Not involved
Not involved
To modify this modification parameter, run has no impact on the "STP None GATEWAYCH equipment. The parameter None K" first andthis modification To modify then "STR run has no impact parameter, GATEWAYCH on the "STP K". GATEWAYCH equipment. The parameter None K" first and then "STR GATEWAYCH K". modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Equipment
Transport
Not involved
Transport
Not involved
None
Radio
The parameter modification has no impact on the equipment. None The cell
Radio
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
should be Versions activated after earlier than the parameter If the value is BSC6900 modification. set too small, V900R011 The parameter None on the UEs modification the cell edge Versions has no impact cannot receive earlier than on the BSC6900 the system equipment. None V900R011 messages The parameter properly. This Versions modification has no impact problem earlier than affects the on the BSC6900 coverage of equipment. None The parameter the downlink V900R011 modification common Versions has no impact channel and earlier than on the BSC6900 furthermore equipment. None The parameter the coverage V900R011 modification of the cell. If Versions has no impact the value is earlier than set too great, BSC6900 on the it causes equipment. V900R011 The parameter None interference to modification other Versions has no impact channels, earlier than on the occupies the BSC6900 equipment. V900R011 The parameter None downlink modification transmit Versions has no impact power, and earlier than on the affects the cell BSC6900 equipment. capacity. V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Not involved
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. None
Transport
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
this parameter is too low, whether the UE is value of If the in the stable low this parameter activity state is too low, cannot be whether the determined. If Versions UE is value of If the in the the value of earlier than stable low this parameter BSC6900 activity state high, Not involved is too low, the V900R011 cannot the The parameter None be whether dedicated If modification determined. Versions UE is value channel the If the in has no impact the value ofof earlier than stable low resources are this parameter BSC6900 on the activity This wasted.state is too low, equipment. None high, the V900R011 cannot be parameter whether the dedicated If determined. should be set Versions UE is in the channel of the value on the low are earlier than stable basis resources of this parameter the BE service BSC6900 activity This wasted.state is too high, Not involved model. be the V900R011 cannot parameter dedicated If determined. should be set Versions channel of thethe basis of earlier than on value are resources this parameter the BE service BSC6900 wasted. This is too high, the V900R011 Not involved model. parameter dedicated should be set Versions channel on the basis of earlier than resources are the BE service BSC6900 wasted. This Not involved model. V900R011 parameter should be set Versions If the value of earlier than on the basis of this parameter the BE service BSC6900 Not involved is too low, model. V900R011 whether the Versions UE is in the earlier than stable low activity state BSC6900 Not involved None be V900R011 cannot determined. If Versions the value of earlier than this parameter BSC6900 is too Not involved None high, the V900R011 dedicated Versions channel resources are earlier than wasted. This BSC6900 Not involved None V900R011 parameter should be set Versions If the value of If the value of on the basis of earlier than this parameter this parameter the BE service BSC6900 is too high, Not involved is too high, the V900R011 model. congestion period of may occur reporting 4A Versions over the earlier than event is commonand BSC6900 delayed Not involved channel. V900R011 congestion may occur Versions over the earlier than common BSC6900 Not involved channel. V900R011
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Not involved
None
Not involved
If the value of If the value of this parameter this parameter is too high, the is too high, congestion period of may occur reporting 4A Versions over the earlier than event is commonand BSC6900 delayed channel. V900R011 congestion may occur of Versions If the value of If thethe value overparameter earlier than this parameter this common is too high, the BSC6900 is too high, channel. V900R011 congestion period of may occur reporting 4A Versions over the earlier than event is commonand BSC6900 delayed channel. V900R011 congestion may occur of Versions If the value of If thethe value overparameter earlier than this parameter this common is too high, the BSC6900 is too high, channel. V900R011 congestion period of may occur reporting 4A Versions over the earlier than event is commonand BSC6900 delayed channel. V900R011 congestion may occur of Versions If the value of If thethe value overparameter earlier than this parameter this common is too high, the BSC6900 is too high, channel. V900R011 congestion period of may occur reporting 4A Versions over the earlier than event is commonand BSC6900 delayed channel. V900R011 congestion may occur of Versions If the value of If thethe value overparameter earlier than this parameter this common is too high, the BSC6900 is too high, channel. V900R011 congestion period of may occur reporting 4A Versions over the earlier than event is commonand BSC6900 delayed channel. V900R011 congestion may occur of Versions If the value of If thethe value overparameter earlier than this parameter this common is too high, the BSC6900 is too high, channel. V900R011 congestion period of may occur reporting 4A Versions over the earlier than event is commonand BSC6900 delayed channel. V900R011 congestion may occur Versions over the earlier than common BSC6900 channel. V900R011
Radio
Not involved
None
Not involved
Radio
Not involved
None
Not involved
Radio
Not involved
None
Not involved
Radio
Not involved
None
Not involved
Radio
Not involved
None
Not involved
Radio
Not involved
None
Not involved
Radio
Not involved
None
Not involved
Radio
Not involved
None
Not involved
Radio
Not involved
None
Not involved
Radio
Not involved
None
Not involved
Radio
Not involved
None
Not involved
Radio
Not involved
Not involved
Not involved
When None this Not involved parameter is set to 65535, it is regarded that the state None transition from Not involved FACH or E_FACH to PCH is not performed. Not involved
Not involved
None
Not involved
Not involved
None
Not involved
this parameter is too low, whether the UE is value of If the value of If the in the stable low this parameter this parameter activity state is too high, the low, is too high, cannot be congestion whether period ofthe If determined. Versions may occur UE is value of reporting 4A If the in the the value over the of earlier than stable is event low this parameter commonand BSC6900 activity delayedstate is too low, the V900R011 high, channel. cannot be congestion whether commonthe If determined. Versions may occur UE is in channel the the value of over the are earlier than stable low resources this parameter BSC6900 commonThis activity wasted.state is too high, channel. the V900R011 cannot be parameter dedicated If determined. should be set Versions channel of the value on the basis of earlier than resources are this parameter the BE service BSC6900 wasted. This is too high, the V900R011 model. parameter dedicated should be set Versions channel on the basis of earlier than resources are the BE service BSC6900 wasted. This model. V900R011 parameter should be set Versions on the basis of earlier than the BE service BSC6900 model. V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Radio
Radio
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. None
Radio
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. None
Transport
Not involved
None
Radio
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
Not involved
Not involved
Not involved
Not involved
The parameter modification has no impact To disable the on the alarm blink None equipment. None filter function, The parameter modification set this parameter to has no impact "0". To enable on the None the alarm blink equipment. The parameter None filter function, modification set this has no impact parameter to a on the value None greater equipment. The parameter None than 0 and modification turn on the has no impact alarm blink on the filter switch. To enable the equipment. None See "SET The parameter None alarm blink ALMBLKSW" modification filter function, for setting the has no impact set "Alarm alarm blink on the switch of filter switch. blinking filter" equipment. The parameter None and "Switch of stat blinking alarm" to The "ENABLE". modification of the timer involves the peer end. For None see details, ITU-T Q2630.1 or ITU-T Q2630.2. modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Radio
BSC6900 V900R011
Equipment
BSC6900 V900R011
Equipment
Not involved
BSC6900 V900R011
Equipment
Not involved
Equipment
Not involved
Transport
Not involved
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Not involved
None
Equipment
Not involved
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Equipment
Not involved
None
Radio
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None If certain link is occupied, None conversion from E1 to T1 or from T1 to E1 cannot be performed.
Equipment
Not involved
Equipment
Not involved
Transport
None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Not involved
The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved
None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Radio
None
Equipment
None
Transport
are interrupted until the SAAL link is working normally. None The FRAATM link must be available.
Transport
Transport
Not involved
None
Transport
Not involved The services are interrupted until the SAAL link is working normally. None
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Transport
Transport
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved The services are interrupted until the SAAL link is working normally. None
Not involved None The parameter modification has no impact on the equipment. The parameter None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Transport
modification has no impact The port must on the be available. equipment. The parameter None modification has no impact on the equipment. None
Transport
Not involved
None
Transport
Not involved The services are interrupted until the SAAL link is working normally. None
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None
Transport
Transport
None
Transport
are interrupted modification until the SAAL has no impact link is working When the on the normally. None type is equipment. The services bearing The parameter None are interrupted modified, the until the SAAL new bearing link is working type must be normally. configured. modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Transport
Transport
None
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Not involved The services are interrupted until the SAAL link is working normally. None
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Transport
Transport
Transport
Not involved
None
Transport
Not involved The services are interrupted data must be until the SAAL the same as link is working that of the normally. is peer system. If the value not consistent, will interrupt service until it The is consistent. None The services configuration The services are be will interrupted data must be until the SAAL the same as interrupted if link setting of that of the the is working normally. this parameter peer system. is inconsistent with the setting at the peerservices None The end.
The parameter cannot be The modified. configuration Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Transport
Transport
Transport
Transport
Transport
are interrupted until the SAAL link is working normally. None The ATM logic Less than 5 minutes port after the modification must be available.
Transport
Transport
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Service Area Identity (SAI). 2. SAI = PLMN + LAC + SAC. PLMN-Id (Public Land The parameter Mobile modification Network has no impact Identity) is on the configured None equipment. The parameter None through the modification command has no impact "ADD on the UCNOPERAT None equipment. None OR" and LAC The parameter (Location Area modification has no impact Code) is on the configured None the equipment. through The parameter None command modification "ADD has no impact UCELLSETUP on the ". LAC of CBS equipment. None None is the same as The parameter that of CS/PS. modification has no impact This parameter is on the None 3. SAC equipment. SAC. The parameter None of CBS is modification different from has no impact that of CS/PS on the because SAC equipment. None None of CBS need Thisbe not parameter configured cannot be through the modified. Not involved None command The parameter "ADD USAC" modification in advance. 4. has no impact When the on the CBS Noneis active, equipment. The parameter None "CBSSAC" modification must not be has no impact removed or on the modified. 5. None None The parameter equipment. modification has no impact on the equipment. Not involved None This parameter cannot be modified.
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Equipment
Equipment
Transport
Equipment
Equipment
Radio
Equipment
Equipment
Equipment
Not involved
Not involved
None
Not involved None The parameter modification has no impact on the equipment. None
Radio
Equipment
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
ID" and add CBS cells by referring to "ADD UCELLCBSS AC".The parameter modification has no impact The on the modification of equipment. the parameter affects the adjacent node configured None with the TRMMAP. After the The successful modification of modification, it None the parameter is valid in the affects the case ofthe adjacent node new access of configured a subscriber If thethe None with the and parameter is TRMMAP. bandwidth modified, the After the modification of admission rule successful ansubsequent of existing it modification, subscriber. new access is valid in the servicesthe case of are affected (Path new access of type selection a subscriber If the sequence). and the is parameter bandwidth modified, the modification of admission rule ansubsequent of existing subscriber. new access
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Equipment
Radio
Radio
Transport
Transport
Transport
Not involved
Not involved
Not involved
services are modification affected (Path has no impact The type selection on the modification sequence). of equipment. None the parameter does not The parameter affect the cannot be established modified. but Not involved None SAAL link, The parameter affect the next modification establishment has no impact of the SAAL on the link. equipment. None The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. None
Transport
Transport
Transport
Not involved
Transport
Not involved
None
Radio
Not involved
None
Not involved
None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Equipment
Radio
Not involved
None
Radio
Not involved
None
Not involved
None
Equipment
Not involved
None
Not involved
None
Equipment
Not involved
None
Not involved
None
Equipment
Not involved
None
Not involved
None
Equipment
Not involved
None
Not involved
None
Equipment
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. None
Equipment
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Not involved
None
Equipment
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Equipment
Radio
Not involved
None
BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Equipment
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
The lower the code resource LDR trigger threshold is, the easier the downlink code Not involved None The parameter resource modification enters the has no impact initial congestion on the status, the equipment. The parameter None the easier modification LDR action is has no impact triggered, and on the the easier the equipment. None subscriber perception is affected. But a lower code resource LDR Not involved None trigger the cell When threshold breathing causes a is algorithm higher Not involved activated, if The parameter None admissionis the value modification success rate too small, the has no impact because the physical on the resource is coverage of equipment. reserved. the cell is limited so as to avoid cell capacity Not involved waste. If the The parameter None is too value modification great, the has no impact physical on the coverage is equipment. The parameter None expanded and modification interference has no impact over other on the cells is equipment. increased.
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Radio
Radio
Radio
Radio
Equipment
Radio
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. None
Radio
Radio
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
The parameter modification When the cell has no impact breathing algorithm is on the activated, if equipment. The parameter None the value is modification too small, the has no impact physical on the coverage of equipment. the cell The parameter None is modification limited so as has no impact to avoid cell capacity on the waste. If the equipment. The parameter None is too value modification great, the has no impact physical on the coverage is equipment. The parameter None expanded and modification interference has no impact over other on the cells is equipment. The parameter increased. modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Radio
Radio
Radio
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Radio
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
Not involved
Not involved
Not involved
If the value of None the parameter is set to 0, channel retry cannot be performed. When the This network status parameter is poor, the cannotcount check be modified. be should not too small. Otherwise, the path state is affected. This parameter cannot be modified.
Not involved
None
Radio
Not involved
None
Radio
Not involved None The parameter modification has no impact on the equipment. None
Radio
Transport
Not involved
Not involved
None
Radio
Not involved
None
Transport
The checksum The parameter mode need modification the has no impact negotiation with checksum on the The the peer. Not involved None The services According to equipment. The parameter None mode need are interrupted the RFC4960, modification the until the SCTP the value has no impact negotiation link is working should be set on the with the peer. normally. The services to CRC32. to equipment. According The parameter None are interrupted the RFC4960, until the SCTP the value link is working should be set normally. The services to CRC32. are interrupted until the SCTP link is working normally. None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Transport
Transport
Transport
Not involved
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Transport
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Not involved
None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Not involved
None
Radio
Versions earlier than The larger the BSC6900 Not involved None Not involved sum, the None V900R011 higher the Versions handover priority of the earlier than BSC6900 neighboring Not involved None Not involved None V900R011 cell. The smaller the This Versions sum, the lower earlier than parameter the handover BSC6900 cannot be The larger the Not involved modified. Not involved priority of the V900R011 value The parameter None of the neighboring modification parameter is, Versions cell. Usually it has no impact the easier it is earlier than is configured to beThe on the to 0. handed BSC6900 over to the Not involved None equipment. larger the The parameter None network. V900R011 GSM modification parameter, the Versions The smaller has no impact easier of the earlier than the value of handover to BSC6900 on the the parameter the Not involved None equipment. The parameter None harder V900R011 is, the neighboring modification it is to be Versions cell. The has no impact handed the over earlier than smaller on the to the GSM the BSC6900 parameter, Not involved None equipment. network. V900R011 The cell harder the Interruption The cell should be handover to Versions until the cell is should be activated after the earlier than activated deactivated in the parameter neighboring BSC6900 again. advance. modification. cell. V900R011 The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Transport
Not involved
If you want to modify the value of "Clock board type" from "GCGa" to None "GCUa", the board must not be configured with GPS.
The parameter modification has no impact on the The board equipment. None should be reset to validate the parameter modification. None The parameter modification has no impact on the equipment. None The cell should be activated after the parameter modification. None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Equipment
Equipment
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Not involved
None
Radio
Not involved
The parameter cannot be modified. Not involved This parameter cannot be modified.
None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Not involved
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
Radio
Not involved
None
Radio
Not involved
None
Not involved
None
Equipment
Not involved
None
Not involved
None
Equipment
Not involved
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Transport
Not involved
None
Equipment
Not involved
None
Radio
Not involved
Not involved
None
Radio
Not involved
Not involved
None
Not involved None The parameter modification has no impact on the equipment. None
Radio
BSC6900 V900R011
Radio
Not involved
None
BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Not involved
None
Radio
Not involved
The parameter cannot be modified. Not involved This parameter cannot be modified. This parameter cannot be modified.
None
Equipment
Not involved
Not involved
None
Radio
Not involved
Not involved
None
Not involved None The parameter modification has no impact on the equipment. None
BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Not involved
The parameter cannot be modified. Not involved This parameter cannot be modified. This parameter cannot be modified. This parameter cannot be modified. This parameter cannot be modified. This parameter cannot be modified.
None
Equipment
Not involved
Not involved
None
Radio
Not involved
Not involved
None
Radio
Not involved
Not involved
None
Radio
Not involved
Not involved
None
Radio
Not involved
Not involved
None
Radio
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
and youcount "Upper must ensure that threshold of "Upperfault" count raised the IuWhen threshold of cannot be 0 Flex functionis raised fault" and you the must is used,than greater that ensure protocol "Lower count "Lower count version of of threshold of This CN threshold node each fault". raised fault" is parameter or raised R5 must be 3. When cannot be smaller than later.The "Upper count Not involved None modified. "Upper count parameterof threshold of threshold modification is raised fault" raised fault". has "0" and not no impact 3. When on the switch "Alarm count "Upper equipment. Not involved None of blinkingof The parameter threshold filter" and is modification raised fault" "Switchand not "0" of stat has no impact blinkingswitch on the "Alarm alarm" are None equipment. of blinking The parameter None "ENABLE", filter" and you cannot set modification "Switch of stat has no impact "Alarm blink blinking alarm" on the threshold" to are None equipment. "0". The parameter None "ENABLE", Otherwise, set modification you cannot blink statistics has no impact "Alarm blink of the alarm is on the threshold" to not performed. equipment. "0". The parameter None Otherwise, modification blink statistics has no impact of the alarm is on the not performed. equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Equipment
Equipment
Equipment
BSC6900 V900R011
Equipment
BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Not involved
None
Not involved
None
can be selected for interfrequency handover during code The parameter resource modification congestion, Versions has no impact which can earlier than easily release BSC6900 on the code equipment. V900R011 The parameter None congestion modification and use multi- Versions has no impact frequency earlier than on the BSC6900 resources. equipment. None The parameter However, the V900R011 modification risk of interVersions has no impact frequency earlier than on the blink handover BSC6900 equipment. increases. V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Radio
Not involved
Not involved
None
Radio
Not involved
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
Radio
Not involved
None
Radio
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. None
Radio
BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Not involved
Not involved
None For the modification of modification the parameter, has no impact see the ITU-T on the Q.2110. equipment. None
Not involved None The parameter modification has no impact on the equipment. The parameter None
Radio
Equipment
Transport
Not involved
For the The parameter modification of modification the parameter, has no impact see the ITU-T on the Q.2110. equipment. For the The parameter None modification of modification the parameter, has no impact see the ITU-T on the This Q.2110. can equipment. parameter The parameter None be added and modified. It cannot be This deleted. can parameter be added and modified. It cannot be This deleted. can parameter be added and modified. It cannot be This deleted. can parameter be added and modified. It cannot be This deleted. can parameter be added and modified. It cannot be This deleted. can parameter be added and modified. It cannot be This deleted. can parameter be added and modified. It cannot be This deleted. can parameter be added and modified. It cannot be This deleted. can parameter be added and modified. It cannot be This deleted. can parameter be added and modified. It cannot be deleted. modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Not involved
Transport
Not involved
Transport
Not involved
Transport
Not involved
Transport
Not involved
Transport
Not involved
Transport
Not involved
Transport
Not involved
Transport
Not involved
Transport
Not involved
Transport
Not involved
Transport
Not involved
This parameter can be added and modified. It cannot be This deleted. can parameter be added and modified. It cannot be deleted.
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Not involved
Transport
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Equipment
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Transport
Not involved
None
Radio
Not involved
None
Transport
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
Radio
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Transport
Not involved
None
Not involved
None
Equipment
Not involved
None
None
Not involved None The parameter modification has no impact on the equipment. None The cell
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Radio
Not involved
Not involved
Not involved
The cell should be should be activated after Before deactivated in the parameter enabling load advance. sharing, you modification. None The parameter need to set modification the has no impact "RNC_SHARE on the _SWITCH" None equipment. None switch in "SET The parameter URRCTRLSW modification has no impact ITCH" to on the ON.The None equipment. None parameter modification has no impact on the equipment. Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None
Radio
Equipment
Equipment
Equipment
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Radio
Not involved
The parameter modification is related to has no impact practical on the networking. equipment. None
Transport
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
The parameter modification The has no impact modification of on the the parameter equipment. None The parameter None affects the adjacent node modification has no impact that is The configured of on the modification None factor equipment. withparameter The parameter None the the table. After the modification affects the successful adjacent node has no impact modification, on the configured the parameter equipment. None None with the takes effect in The parameter TRMMAP. the following modification After the has no impact two cases: The successful 1. New access on the modification it modification,of equipment. None None subscriber. the parameter The parameter is valid in the 2. Bandwidth modification affects the case of the modification of has no impact adjacent node new access of the existing configured a subscriber on the If thethe subscriber with and the is equipment. The parameter None parameter TRMMAP. bandwidth modified, the modification The After the modification of has no impact admission rule modification successful of ansubsequent on the of existing it the parameter equipment. modification, subscriber. None new access affects the is valid in the The parameter servicesthe adjacent node case of are modification affected (Path has no impact that access of new is type selection on the configured a subscriber If thethe factor equipment. sequence). None with the and parameter is The parameter table. After the modification bandwidth modified, the successful modification of has no impact admission rule modification, ansubsequent on the of existing the parameter equipment. subscriber. new access in The parameter None takes effect services are modification the following affected (Path has no impact two cases: type selection on the 1. New access sequence). equipment. subscriber. The parameter None 2. Bandwidth modification modification of has no impact the existing on the subscriber equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Equipment
Equipment
Equipment
Transport
Transport
Transport
Transport
Transport
Transport
Not involved
None
Radio
Not involved
None
Radio
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
on the CFGPARA" is of equipment. set to CsInfoUpdTmr When SUPP_IUFLE The settings is valid only "CNProtclVer" X or the of when in "ADD SUPP_IUFLE CSNRILength value of UCNNODE" is X_MOCN.The is valid only "CsInfoUpdFla set to the or R6 parameter when"SET g" inlater any of modification value UOPERATOR version, has no impact "CsNriCfgMod CFGPARA" is CsNriCfgMode on in "SET e" to set theON.The may be set equipment. to Not involved None UOPERATOR parameter SUPP_MOCN CFGPARA" modification is or to set no impact has SUPP_IUFLE SUPP_IUFLE on the X_MOCN.The X, equipment. Not involved None parameter SUPP_MOCN modification or has no impact SUPP_IUFLE on the X_MOCN.The equipment. Not involved None parameter modification The no impact has modification of on the the parameter Not involved None equipment. The parameter affects the adjacent node modification has no impact that is The configured of on the modification equipment. None factor The parameter None withparameter the the table. After the modification affects the successful adjacent node has no impact modification, on the configured the parameter equipment. None None with the takes effect in The parameter TRMMAP. the following modification After the has no impact two cases: The successful 1. New access on the modification it modification,of equipment. None None subscriber. the parameter is valid in the The parameter 2. Bandwidth modification affects the case of the modification of has no impact adjacent node new access of the existing configured a subscriber on the If thethe subscriber with and the is equipment. The parameter None parameter TRMMAP. bandwidth modified, the modification After the modification of has no impact admission rule successful ansubsequent on the of existing it modification, equipment. subscriber. None new access is valid in the The parameter servicesthe case of are modification affected (Path has no impact new access of type selection on the a subscriber If the sequence). and the is equipment. The parameter None parameter bandwidth modified, the modification modification of has no impact admission rule ansubsequent on the of existing subscriber. equipment. new access The parameter None services are affected (Path type selection sequence). modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Equipment
Equipment
Equipment
Radio
Radio
Radio
Transport
Transport
Transport
Transport
Not involved
Transport
Not involved
modification, the parameter takes effect in the following two cases: 1. New access subscriber. The parameter 2. Bandwidth modification modification of has no impact the existing on the subscriber equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Not involved
None This parameter cannot be modified. This parameter cannot be modified. This parameter cannot be modified.
Not involved None The parameter modification has no impact on the equipment. None
Radio
BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Not involved
Not involved
Not involved None The parameter modification has no impact on the equipment. None
Radio
Radio
Not involved
Not involved
None
Not involved None The parameter modification has no impact on the equipment. None
Radio
Equipment
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. None
Transport
Not involved
None
Equipment
Not involved
None
Transport
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
Equipment
Not Involved
None
BSC6900 V900R011
Equipment
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
Radio
Not involved
None
Radio
Not involved
None
Not involved
None If the line delay is great and the None maximum delay is too small, certain links cannot be activated.
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
Radio
Not involved
Radio
Not involved
Transport
Not involved
None
Radio
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
Not involved
Not involved
Not involved
None When running this command, The parameter the source cannot be IP address and Not involved None modified. the destination The parameter modification IP address cannot be the has no impact on the local IP None and equipment. address The parameter None the peer IP modification address has no impact configured for on the the IPPATH. equipment. None The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved
Radio
Transport
Equipment
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
BSC6900 V900R011
Transport
Not involved
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None If the value is too high the Not involved system loadof None value If the after this parameter admission is setbe over may too high, delay is large, which Not involved caused. The parameter impacts modification system has no impact stability and leads to on the system equipment. The parameter None congestion. If modification the value is has no impact too low, the on the possibility of equipment. The parameter Nonerejects user modification may increase, has no impact resulting in on the waste in idle equipment. resources.
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Not involved
None
Not involved
None
Not involved
None
large, which system load impacts after system admission stability over may be and leads to large, which system impacts The parameter congestion. If system modification the value is stability and has no impact too low, the leads to possibility of on the system user rejects If equipment. congestion. The parameter None may increase, is modification the valuein resulting has no impact too low, the waste in idle possibility of on the resources and user rejects equipment. The parameter None the failure to may increase, modification achievingin resulting has no impact network idle waste in on the planning and resource equipment. The parameter target. the failure to modification achieving the has no impact network on the planning equipment. The parameter target.
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Radio
Radio
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
modification Versions has no impact earlier than on the BSC6900 equipment. None V900R011 The backer The parameter position the modification Versions has no impact value is in earlier than {SF4,SF8,SF1 BSC6900 on the 6,SF32,SF64, V900R011 equipment. The parameter None SF128,SF256, modification SFOFF}, the Versions has no impact less code and earlier than on the BSC6900 credit equipment. None V900R011 resources The parameter reserved for Versions modification has no impact handover earlier than UEs. The on the BSC6900 possibility of V900R011 equipment. None rejecting handover UE Versions earlier than admissions increases and BSC6900 Not involved None performance V900R011 of UEs cannot Versions be earlier than guaranteed. BSC6900 Not involved The more The parameter None position V900R011 frontal modification the value is, Versions has no impact the more the earlier than on the possibility of BSC6900 equipment. The parameter None rejecting new V900R011 modification UEs is and Versions has no impact some idle earlier than on the resources are BSC6900 equipment. wasted. V900R011
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
leads to the value of system parameter congestion. If gives rise to the value is the fluctuation too low, the and possibility of congestion of The parameter user rejects the target cell modification may increase, Versions load. The has no impact resulting in earlier than lower the on the waste in idle BSC6900 parameter is, equipment. V900R011 the smaller The parameter resources. modification amplitude of Versions has no impact the load earlier than decreases as BSC6900 on the a result of the V900R011 equipment. The parameter None intermodification frequency Versions has no impact load earlier than on the handover, and BSC6900 equipment. The parameter None the easier it is V900R011 modification The lower the Versions to maintain has no impact parameter of earlier than the stability value is, the BSC6900 on the the target cell easier the equipment. The parameter load. enters V900R011 credit modification the congestion Versions has no impact status, the earlier than on the BSC6900 easier the equipment. Noneaction is V900R011 LDR The parameter modification triggered, and Versions has no impact the easier the earlier than user on the BSC6900 experience is V900R011 equipment. None The parameter affected. A modification lower code Versions has no impact resource LDR earlier than on the BSC6900 trigger equipment. None V900R011 threshold, The parameter however, modification Versions has no impact causes a earlier than higher on the BSC6900 admission equipment. None The parameter success rate V900R011 modification because the Versions has no impact resource is earlier than on the reserved. The BSC6900 equipment. V900R011 The parameter None parameter modification should be set Versions has no impact based on the earlier than on the operator's BSC6900 equipment. requirement. V900R011 The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
modification Versions has no impact The lower the earlier than LDR trigger on the BSC6900 and release equipment. None V900R011 The parameter thresholds modification are, the easier Versions has no impact the system earlier than on the BSC6900 enters the equipment. None V900R011 preliminary The parameter congestion modification Versions has no impact status, the earlier than harder it is on the BSC6900 released from V900R011 equipment. None The parameter this status, the modification easier the Versions has no impact LDR action is earlier than on the triggered, and BSC6900 equipment. the more likely V900R011 The parameter None modification the users are Versions has no impact affected. But, earlier than the admission BSC6900 on the success rate V900R011 equipment. The parameter None becomes modification higher since Versions has no impact the resources earlier than on the are preserved. BSC6900 equipment. V900R011 The parameter None The carrier modification shall make a Versions has no impact trade-off earlier than on the between these BSC6900 equipment. V900R011 The parameter factors. modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
The parameter modification Versions has no impact The lower the earlier than LDR trigger on the BSC6900 and release equipment. None V900R011 The parameter thresholds modification are, the easier Versions has no impact the system earlier than on the BSC6900 enters the equipment. None V900R011 preliminary The parameter modification congestion Versions has no impact status, the earlier than harder it is on the BSC6900 released from V900R011 equipment. None The parameter this status, the modification easier the Versions has no impact LDR action is earlier than on the triggered, and BSC6900 equipment. the more likely V900R011 The parameter None modification the users are Versions has no impact affected. But, earlier than the admission BSC6900 on the success rate V900R011 equipment. The parameter None becomes modification higher since Versions has no impact the resources earlier than on the are preserved. BSC6900 equipment. V900R011 The parameter None The carrier modification shall make a Versions has no impact trade-off earlier than on the between these BSC6900 equipment. V900R011 The parameter factors. modification Versions has no impact The greater earlier than on the BSC6900 the filtering equipment. None The parameter coefficient is, V900R011 modification the greater the Versions has no impact smoothing earlier than effect is and BSC6900 on the the less the equipment. V900R011 The parameter None random modification interference is. Versions has no impact Yet the earlier than on the BSC6900 response to equipment. None V900R011 changes of the measured Versions value earlier than becomes BSC6900 Not involved slower. V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
Not involved
Not involved
If the recommended TFO/TrFO is that the timer not should be set configured, it to 3000ms. If is the TFO/TrFO recommended is configured, that the timer it is should be set recommended to 3000ms. If thatTFO/TrFO the the timer should be set is configured, None ms to tois it 7000 complete the recommended adjustment of that the timer DL AMR set should be speech rate. to 7000 ms to complete the adjustment of DL AMR speech rate.
Not involved
None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Radio
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The lower the The parameter None modification OLC trigger has no impact threshold is, the easier the on the system is in equipment. The parameter None the overload modification status. An has no impact excessively on the low value of equipment. the OLC The parameter None modification trigger has no impact threshold is very on the detrimental to equipment. The lower the The parameter None the system modification OLC trigger performance. has no impact threshold is, Theeasier the the lower the on the OLC release system is in equipment. The parameter None threshold is, the overload modification the harder the status. An has no impact system excessively on the releases the low value of equipment. the OLC The parameter overload. modification trigger has no impact threshold is very on the detrimental to equipment. The parameter None the system modification performance. has no impact The lower the on the OLC release equipment. The parameter None threshold is, modification the harder the has no impact system on the releases the equipment. overload.
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Not involved
None
possibility of user rejects may increase, resulting in waste in idle resources and The parameter the failure to modification achieving has no impact network on the planning equipment. The parameter target. modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. None
Radio
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Versions The larger the earlier than value of the BSC6900 parameter is, V900R011 Not involved None The parameter the more modification easily event Versions has no impact 2B, interearlier than on the BSC6900 frequency equipment. None V900R011 handover based on Qos, Versions and event 3A, earlier than inter-RAT BSC6900 handover Not involved None V900R011 based on Qos, Versions can be triggered, and earlier than thus the more BSC6900 Not involved None the V900R011 The parameter timely modification handover to Versions has no impact the target cell earlier than on the can be BSC6900 equipment. performed. V900R011 The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Radio
Radio
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
greater is. In threshold the The higher of possibilities this case, value of this meeting the there are is, parameter the requirement The higher greater the the lower for lowering of value of this possibilities absolute is, the AMRthe parameter meeting is. In threshold the speech rate. the lower requirement this case, Thus, it is Versions absolute for lowering there to less easierare lower earlier than threshold is. In the wideband possibilities the AMR of BSC6900 this case, AMR speech meeting the Not involved speech rate. is V900R011 thereThus, the rate.higher it The are less requirement of possibilities easierof this Versions value to lower for stopping meeting the the wideband earlier than parameter is, AMR speech The higher the requirement BSC6900 AMR speech the ratelower the value for stopping Not involved rate. of this V900R011 absolute is, adjustment. parameter wideband is. In threshold the Thus,speech Versions the lower AMR it is this case, easier to lower earlier than absolute rate higher the TheAMR less BSC6900 there the are is. In threshold adjustment. this possibilities Not involved value ofrate.of V900R011 speech is this case, is, Thus, it the parameter the meeting less The higher there to the easierare lower Versions the lower requirement of value of this earlier than possibilities the raising the absolute is, for wideband parameter meeting the AMR speechIn BSC6900 threshold is. AMR speech the lower requirement Not involved rate.case, the is V900R011 this Thus, it rate. absolute the for raising there are is. more difficultIn Versions threshold is wideband If the value greater to raise the this high, the AMR speech earlier than too case, of BSC6900 possibilities AMR Thus, it is there are rate. speech system the Not involved meetingload V900R011 rate. difficult greater more after requirement of possibilities to raise the Versions admission for stopping meetingover earlier than wideband may be the AMR speech requirement AMR speech BSC6900 large, which rate increase. for stopping Not involved rate. it is V900R011 impacts Thus, wideband system more speech Versions AMR difficult stability and earlier than to raise the rate increase. leads speech BSC6900 AMR to is Thus, it Not involved system rate. difficult V900R011 more congestion. If to raise the Versions the value is wideband earlier than too low, the AMR speech BSC6900 possibility of Not involved rate. rejects V900R011 The parameter user modification may increase, Versions has no impact resulting in earlier than on the waste in idle BSC6900 equipment. resources. V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
Transport
Not involved
None
Radio
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
None
Transport
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. None The cell should be activated after the parameter modification. None The parameter modification has no impact on the equipment. None The cell should be activated after the parameter modification. None The parameter modification has no impact on the equipment. None
Transport
BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Radio
Radio
Not involved
None
Radio
Not involved
None
Transport
Not involved
The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved
None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Not involved
None
Transport
Not involved
None
Equipment
Not involved
None
Transport
Not involved
None
Not involved
None
Transport
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
Radio
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
Radio
Not involved
None
Radio
Not involved
Not involved
This None parameter can be added and modified. It cannot be This deleted. can parameter be added and modified. It cannot be This deleted. can parameter be added and modified. It cannot be This deleted. can parameter be added and modified. It cannot be This deleted. can parameter be added and modified. It cannot be This deleted. can parameter be added and modified. It cannot be deleted.
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Transport
Not involved
Transport
Not involved
Transport
Not involved
Transport
Not involved
Transport
Not involved
Transport
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. None
Radio
Radio
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
Radio
Not involved
None
Radio
Not involved
None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None
Transport
Not involved
None
Transport
Not involved
None
Radio
Not involved
Not involved
Not involved
The priority of modification the signaling has no impact link should be on the the highest. equipment. None The existing networking The be can parameter cannot be affected when modified. Not involved None the relation The parameter between the modification VLAN and the has no impact DSCP are on the reset. equipment. The parameter None modification has no impact on the equipment. None
Transport
Transport
Transport
Not involved
None
Equipment
Not involved
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. None
Transport
Not involved
None
Equipment
Not involved
The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved
None
Transport
Not involved
None
Transport
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Not involved
None
Transport
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
Not involved
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Transport
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
Not involved
None
Not involved
None
Not involved
None The address must exist and respond to the PING request.
None If the parameter value is set too high, the Not involved downlink None codes are wasted. If the parameter value is set Not involved None the The cell too low, should be uplink activated after throughput of the parameter the HSUPA is modification. restricted. The parameter modification has no impact on the equipment. None
Radio
Radio
Radio
Radio
Not involved
Transport
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
Radio
Not involved
None
Radio
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
26 October, this date is not included in the November of 2005. Therefore, the specific date is invalid. This date in 2006, however, is October 31, None Not involved None which is valid. As a result, you must follow this None Not involved None principle to The parameter ensure that a modification specific data is has no impact always valid. on the 2. You are not equipment. None None allowed to set The parameter the start date modification or end date of has no impact on the DST to None February 29. equipment. The parameter None This is modification because that has no impact the local time on the changes None equipment. None between the The parameter start date and modification has no impact end date of DST. In a non- on the None equipment. leap year, The parameter None February 29 modification does not exist. has no impact Therefore, the on the local time None equipment. The parameter None cannot modification change between DST has no impact and non-DST. on the None start equipment. 3. The The parameter None month and modification end month of has no impact DST cannot on the be the same. equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Radio
Radio
Equipment
Equipment
Equipment
Equipment
Equipment
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Not involved
None
Radio
Not involved
Not involved
Not involved
Not involved
Not involved
modification The has no impact modification of on the the parameter equipment. None The parameter None affects the adjacent node modification has no impact that is on the configured None factor equipment. with the The parameter None table. After the modification successful has no impact modification, on the the parameter equipment. None None takes effect in The parameter the following modification has no impact two cases: 1. New access on the None equipment. subscriber. The parameter None 2. Bandwidth modification modification of has no impact the existing on the subscriber equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
Radio
Radio
Radio
Transport
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
BSC6900 V900R011
Radio
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Not involved
Not involved
None For the modification of modification the parameter, has no impact See the ITU-T on the Q704. equipment. None
Radio
Transport
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
Equipment
Not involved
None
Radio
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Radio
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
Not involved
Not involved
Not involved
None If the parameter value is set The parameter too high, the cannot be downlink modified. Not involved None The parameter codes are modification wasted. If the has no impact parameter on the value is set None equipment. None the The cell too low, should be uplink activated after throughput of the parameter the HSUPA is None modification. restricted. The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Transport
Transport
Equipment
Radio
Not involved
None
BSC6900 V900R011
Transport
Not involved
Not involved
Not involved
The None modification of the timer involves the peer end. For None see details, ITU-T Q2630.1 or ITU-T Q2630.2.
BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Equipment
Transport
Not involved
The modification of the timer involves the peer end. For details, see ITU-T Q2630.1 or ITU-T Q2630.2.
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Radio
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Not involved
None
Equipment
Not involved
None
Not involved
None
Radio
Not involved
None This parameter cannot be modified. This parameter cannot be modified. This parameter cannot be modified.
Not involved
None
Radio
Not involved
Not involved
None
Radio
Not involved
Not involved
None
Radio
Not involved
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the The board equipment. None should be reset to validate the parameter modification. None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Not involved
None
Transport
Negotiation The succeed can parameter cannot be the only when modified. configuration Not involved None The parameter is consistent modification Negotiation on the local can succeed has no impact and peer the on the only when ends. configuration equipment. The parameter None is consistent on the local and peer ends.control Flow function can be affected if this parameter is modified. modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Transport
Transport
Not involved
Transport
Not involved
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved Interrupt the service until negotiate successfully again. the Interrupt service until negotiate successfully again.
The parameter cannot be modified. Not involved None The parameter Negotiation fails if this parameter is modified. Negotiation fails if this parameter is modified. modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Transport
Transport
Transport
Not involved
None
Equipment
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None The cell should be activated after the parameter modification. None The parameter modification has no impact on the equipment. None The cell should be activated after the parameter modification. None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
Radio
Radio
BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Not involved
None
Equipment
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Equipment
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. None
Transport
Not involved
None
Transport
Negotiation can succeed only when the configuration is consistent Negotiation on the local can succeed and peer the only when ends. configuration is consistent on the local and peer ends. flow control function can be affected if this parameter is modified.
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Not involved
Transport
Not involved
Transport
Not involved
Not involved
Not involved
modification In "EXP has no impact ELABEL", the on the "FN" None equipment. None parameter cannot be a The parameter space or any cannot be of the modified. Not involved None following The parameter characters: modification '@', '#', '!', '%', has no impact '^', '&', '*', '[', ']', on the '\'', '\\'. equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Transport
Transport
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Not involved
Not involved None The parameter modification The adjacent has no impact node ID must on the be configured. equipment. None
Radio
Transport
Not involved
No_HC: disable the header compression function; RTP/UDP/IP_ The parameter HC: enable modification the has no impact RTP/UDP/IP/P on the PP function equipment. None The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Not involved
Transport
Not involved
None
Transport
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Transport
Not involved
Equipment
Not involved
Transport
Not involved
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Transport
Not involved
None
BSC6900 V900R011
Equipment
Not involved
None
BSC6900 V900R011
Equipment
Not involved
None
BSC6900 V900R011
Equipment
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
BSC6900 V900R011
Equipment
Not involved
None
BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Not involved
The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
This The parameter modification cannot be of the parameter Not involved None modified. affects the This adjacent node The parameter that is modification of cannot be configured the parameter Not involved None modified. with the factor The parameter affects the table. After the modification adjacent node successful has no impact that is modification, on the configured the parameter None factor equipment. None with the takes effectthe in table. After the following successful two cases: modification, 1. New access the parameter Not involved None None subscriber. in The parameter takes effect This 2. Bandwidth modification the following parameter modification of has no impact two cases: determines the existing 1. New access on the whether to subscriber equipment. None subscriber. load data from The parameter 2. Bandwidth modification the OMU or modification of has no impact the FLASH the existing on the when the subscriberor equipment. BSC6900 The parameter None the board is modification restarted. The has no impact equipment is on the affected. equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Equipment
Equipment
Transport
Transport
Transport
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
Radio
Not involved
None
Equipment
Not involved
None
Transport
Not involved
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Not involved
None
Radio
Not involved
None
Radio
Not involved
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Transport
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
Radio
Not involved
None
Radio
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Transport
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
The The parameter modification of cannot be the parameter Not involved None modified. The parameter affects the adjacent node modification has no impact that is The configured of on the modification None factor equipment. withparameter The parameter None the the table. After the modification affects the successful adjacent node has no impact modification, on the configured the parameter equipment. None None with the takes effect in The parameter TRMMAP. the following modification After the has no impact two cases: The successful 1. New access on the modification of equipment. modification, it None None subscriber. the parameter The parameter is valid in the 2. Bandwidth modification affects the case ofthe modification of has no impact adjacent node new access of the existing configured a subscriber on the If thethe subscriber equipment. None with the and parameter is The parameter TRMMAP. bandwidth modified, the modification The After the modification of has no impact admission rule modification of on the successful ansubsequent of existing it the parameter equipment. modification, subscriber. None new access affects in the The parameter is valid the servicesthe adjacent node case of are modification affected (Path has no impact that access of new is type selection on the configured a subscriber If thethe factor equipment. sequence). None with the and parameter is The parameter table. After bandwidth the modification modified, the successful modification of has no impact admission rule modification, ansubsequent on the of existing the parameter equipment. subscriber. new access in The parameter None takes effect services are modification the following affected (Path has no impact two cases: type selection on the 1. New access sequence). equipment. subscriber. The parameter None 2. Bandwidth modification modification of has no impact the existing on the subscriber equipment. None
Transport
Radio
Radio
Radio
Transport
Transport
Transport
Transport
Transport
Transport
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
The successful modification of modification, it the parameter is valid in the affects the case ofthe adjacent node new access of configured a subscriber If thethe with the and parameter is The parameter TRMMAP. bandwidth modified, the modification After the modification of has no impact admission rule successful ansubsequent on the of existing it modification, equipment. subscriber. None new access is valid in the The parameter servicesthe case of are modification affected (Path has no impact new access of type selection on the a subscriber If the sequence). and the is equipment. The parameter None parameter bandwidth modified, the modification The modification of has no impact admission rule modification of on the ansubsequent existing ofthe the parameter equipment. If subscriber. None new access affects the parameter is The parameter services are modification adjacent the modified,node affected (Path has no impact that is admission rule The type selection on the configured of ofthe modification If subsequent equipment. sequence). withparameter The parameter None new the factor the access parameter is table. After the services are modification affects the modified, the successful affected (Path has no impact adjacent node admission rule The selection on the modification, type configured of of subsequent modification the parameter equipment. sequence). with the newparameter The parameter None the access takes effect in TRMMAP. services are modification affects the the following After the (Path has no impact affected adjacent node two cases: The successful type selection on the configured of 1. New access modification it equipment. modification, sequence). withparameter The parameter None subscriber. the thein the is valid TRMMAP. 2. Bandwidth modification affects the case ofthe After the node modification of has no impact adjacent new access of Theexisting successful the configured a subscriber of on the modification modification, it equipment. subscriber withparameter The parameter None and thein the the the is valid TRMMAP. bandwidth modification affects the case of the After the node modification of has no impact of adjacent new access The successful an existing configured a subscriber of on the modification it equipment. modification, subscriber. with the andparameter The parameter None the the is valid in the TRMMAP. bandwidth modification affects the case ofthe After the node has no impact modification of of adjacent new access successful an existing configured a subscriber it on the modification, equipment. subscriber. with the and thein the The parameter None is valid TRMMAP. bandwidth modification case of the After the modification of has no impact of new access successful an existing a subscriber it on the modification, equipment. subscriber. and thein the The parameter None is valid bandwidth modification case of the modification of has no impact of new access an existing a subscriber on the subscriber. equipment. and the The parameter None bandwidth modification modification of has no impact an existing on the subscriber. equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
successful modification, it is valid in the case of the new access of a subscriber If the and the is The parameter parameter bandwidth modified, the modification modification of has no impact admission rule ansubsequent on the existing ofthe If subscriber. equipment. None new access parameter is The parameter services are modification modified, the The affected (Path has no impact admission rule modification of on the type selection ofthe the parameter If subsequent equipment. sequence). None new access affects the parameter is The parameter services are modification adjacent node modified, the affected (Path has no impact that is admission rule The selection on the type configured of ofthe modification equipment. If subsequent sequence). with the factor newparameter The parameter None the access parameter is table. After the services are modification affects the modified, the successful affected (Path has no impact adjacent node admission rule modification, type selection on the configured of subsequent the parameter equipment. sequence). with the new access in The parameter None takes effect TRMMAP. services are modification the following After the affected (Path has no impact two cases: The selection on the successful type access 1. New modification it modification,of equipment. sequence). None subscriber. the parameter is valid in the The parameter 2. Bandwidth modification affects the case ofthe modification of has no impact adjacent node new access of the existing configured a subscriber on the If thethe subscriber with and the is equipment. The parameter None parameter TRMMAP. bandwidth modified, the modification The the After modification of has no impact admission rule modification successful of on the ansubsequent of existing it the parameter modification, equipment. subscriber. None new access affects in the The parameter is valid the servicesthe adjacent are modification case of node affected (Path has no impact that is new access of The selection on the type configured a subscriber of modification equipment. If thethe factor sequence). with the andparameter The parameter None the parameter is table. After bandwidth the modification affects the modified, the successful of has no impact modification adjacent node admission rule modification, on the ansubsequent configured of existing the parameter equipment. subscriber. with the new access in The parameter None takes effect TRMMAP. services are modification the following After the affected (Path has no impact two cases: successful type selection on the 1. New access modification, it equipment. sequence). None subscriber. is valid in the The parameter 2. Bandwidth modification case of the modification of has no impact new access of the existing a subscriber on the subscriber equipment. and the The parameter None bandwidth modification modification of has no impact an existing on the subscriber. equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
configured If thethe with parameter is TRMMAP. modified, the The the After admission rule modification successful of of subsequent the parameter modification, it new access affects in the The parameter is valid the servicesthe adjacent are modification case of node affected (Path has no impact that is new access of The type selection on the configured a subscriber of modification equipment. If thethe factor sequence). with the andparameter The parameter None the parameter is table. After bandwidth the modification affects the modified, the successful of has no impact modification adjacent node admission rule modification, on the ansubsequent configured of existing the parameter equipment. subscriber. with the new access in The parameter None takes effect TRMMAP. services are modification the following After the affected (Path has no impact two cases: The selection on the successful type access 1. New modification of equipment. modification, sequence). it The parameter None subscriber. the parameter is valid in the 2. Bandwidth modification affects the case ofthe modification of has no impact adjacent node new access of the existing configured a subscriber on the If thethe subscriber equipment. None with the and parameter is The parameter TRMMAP. bandwidth modified, the modification After the modification of has no impact admission rule successful ansubsequent on the of existing it modification, equipment. subscriber. None new access is valid in the The parameter servicesthe case of are modification affected (Path has no impact new access of The type selection on the a subscriber of modification equipment. If the sequence). andparameter The parameter None the the is parameter bandwidth affects the modified, the modification modification of has no impact adjacent node admission rule The ansubsequent on the existing configured of ofthe modification equipment. If subscriber. withparameter The parameter None new the is the access parameter TRMMAP. services are modification affects the modified, the After the node affected (Path has no impact adjacent layer transport successful type selection on the configured bandwidth it modification, sequence).of equipment. with the admissionthe The parameter None is valid in TRMMAP. the of the modification case the After subsequence has no impact new access of successful access service on the a subscriber it modification, equipment. is affected. and thein the The parameter None is valid bandwidth modification case of the modification of has no impact of new access an existing a subscriber on the subscriber. equipment. and the The parameter None bandwidth modification modification of has no impact an existing on the subscriber. equipment. None The parameter cannot be modified. Not involved
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Not involved
None
Transport
Not involved
None
Not involved
None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Transport
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. None
Radio
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. None
Radio
Radio
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. None
Radio
BSC6900 V900R011
Radio
Not involved
Not involved
Not involved
Not involved
Not involved
If the value is too high, admission requirement of the HSDPA The parameter BE service is modification strict, which has no impact improves the service quality BSC6900 on the of the HSDPA V900R011 None equipment. None BE service but also may lead Versions earlier than to HSDPA BSC6900 capacity None Not involved None If the V900R011 waste. value is too Versions low, admission earlier than The parameter requirement of BSC6900 cannot be the HSDPA modified. Not involved None The parameter BE service is V900R011 modification loose, which Versions has no impact allows more earlier than on the BE services BSC6900 None equipment. The parameter None but QoS of the V900R011 modification HSDPA BE Versions has no impact service cannot earlier than on the be BSC6900 None equipment. guaranteed. V900R011 The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Transport
Radio
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
requirement of the HSDPA streaming service is loose, which allows more The parameter HSDPA modification streaming has no impact services but on the QoS of the equipment. The parameter None HSDPA modification streaming has no impact service cannot on the be equipment. The parameter guaranteed. modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
Equipment
Not involved
None
Not involved
None
Not involved
None
Not involved
None
modification Versions has no impact earlier than on the BSC6900 equipment. None V900R011 The parameter modification If the Versions has no impact parameter earlier than value is set on the BSC6900 too low, equipment. None the V900R011 The parameter total HSPA modification power will be Versions has no impact too low, thus earlier than on the impacting the BSC6900 equipment. None The cell throughput of V900R011 should be HSDPA Versions activated after subscribers at earlier than the parameter the border of a BSC6900 modification. cell. V900R011 The parameter modification has no impact on the equipment. The parameter None modification has no impact If the parameter on the value is set equipment. The parameter None the too low, modification HSDPA code has no impact resources are on the restricted and equipment. the HSDPA The parameter None modification performance has no impact is affect. If the parameter on the value is set equipment. The parameter None too high, the modification HSDPA code has no impact resources are on the wasted, thus equipment. None The cell increasing the should be admission activated after rejection rate the parameter of R99 modification. services. Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Radio
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
schedule some multiple scenarios will subscribers exceed the simultaneousl range of 0 to y, so two HS30. As a SCCHs are result, the configured. In NodeB MACThe cell the scenarios hs cannot should be schedule the activated after like indoor subscriber in the parameter pico with code the Not involved None modification. restricted, it is None The cell more likely to corresponding should be schedule time or cannot activated after multiple schedule the parameter subscribers multiple Not involved None modification. None simultaneousl The cell subscribers y, so four should be with the HSSCCHs are activated after difference of the parameter configured. If channel Not involved None modification. excessive HSThe parameter conditions. SCCHs are modification configured, has no impact the code on the resource is Not involved None equipment. None If wasted. The cell insufficient Interruption The cell should be until the cell is should be activated after HS-SCCHs activated deactivated in the parameter are again. advance. modification. configured, None the HSPDSCH code The parameter resource or cannot be power Not involved modified. Not involved None The cell resource is should be wasted. Both activated after affect the cell the parameter throughput Not involved None modification. rate. The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Radio
Radio
Radio
Transport
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Versions earlier than If this value is BSC6900 Not involved None The parameter too high, the V900R011 modification possibility of Versions has no impact rejecting If this value is earlier than HSUPA the BSC6900 on the too high, schedule of V900R011 equipment. possibility The parameter None services modification rejecting Versions increases, has no impact HSUPA which impacts earlier than schedule on the BSC6900 access services equipment. None The parameter success rate. V900R011 increases, modification If the value is Versions which impacts has no impact too low, too earlier than access many HSUPA BSC6900 on the success rate. schedule equipment. None value is V900R011 If the users may be too low, too Versions admitted, many HSUPA earlier than which impacts schedule is BSC6900 If this value the admitted Not involved users may be V900R011 too high, the The parameter None and users admitted, modification possibility of Versions resultsimpacts which in has no impact rejecting and earlier than overload the admitted HSUPA on the system BSC6900 users and schedule equipment. congestion. V900R011 The parameter results in services modification overload and Versions increases, has no impact system which impacts earlier than on the congestionRe BSC6900 access equipment. success rate. The parameter commended. V900R011 modification If the value is Versions has no impact too low, too earlier than many HSUPA BSC6900 on the schedule equipment. The parameter None may be V900R011 users modification admitted, Versions has no impact which impacts earlier than on the the admitted BSC6900 equipment. V900R011 The parameter None and users modification results in Versions has no impact overload and earlier than on the system BSC6900 equipment. congestion. V900R011 The parameter modification has no impact on the equipment. None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
modification has no impact The on the modification of equipment. None None the parameter The parameter modification affects the adjacent node has no impact on the configured None equipment. with the The parameter None TRMMAP. modification After the has no impact The successful on the modification it modification,of equipment. None None the parameter is valid in the The parameter modification affects the case ofthe adjacent node has no impact new access of configured a subscriber on the If thethe None with and the is equipment. The parameter None parameter TRMMAP. bandwidth modified, the modification The the After modification of has no impact admission rule modification successful of on the ansubsequent of existing it the parameter modification, equipment. subscriber. None new access affects in the The parameter is valid the servicesthe adjacent are modification case of node affected (Path has no impact that is new access of The selection on the type configured a subscriber of modification equipment. If thethe factor sequence). with the andparameter The parameter None the parameter is table. After bandwidth the modification affects the modified, the successful of has no impact modification adjacent node admission rule modification, on the ansubsequent configured of existing the parameter equipment. subscriber. with the new access in The parameter None takes effect TRMMAP. services are modification the following After the affected (Path has no impact two cases: successful type selection on the 1. New access modification, it equipment. sequence). None subscriber. is valid in the The parameter 2. Bandwidth modification case of the modification of has no impact new access of the existing a subscriber on the subscriber equipment. and the The parameter None bandwidth modification modification of has no impact an existing on the subscriber. equipment. None
Equipment
Radio
Radio
Radio
Transport
Transport
Transport
Transport
Transport
Transport
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
configured If thethe with parameter is TRMMAP. modified, the The the After admission rule modification successful of of subsequent the parameter modification, it new access affects in the The parameter is valid the servicesthe adjacent are modification case of node affected (Path has no impact that is new access of type selection on the configured a subscriber If thethe factor equipment. sequence). with and the is The parameter None parameter the table. After bandwidth modified, the modification successful of has no impact modification admission rule modification, on the ansubsequent of existing the parameter equipment. subscriber. new access in The parameter None takes effect services are modification the following The affected (Path has no impact two cases: of modification on the type selection 1.the access the parameter equipment. If New sequence). subscriber.is The parameter None affects the parameter 2. Bandwidth modification adjacent the modified,node modification of has no impact that is admission rule The the existing configured of on the ofthe modification If subsequent equipment. subscriber withparameter The parameter None new access the the factor parameter is table. After the services are modification affects the modified, the successful affected (Path has no impact adjacent node admission rule The selection on the modification, type configured of of subsequent modification the parameter equipment. sequence). with the newparameter The parameter None the access takes effect in TRMMAP. services are modification affects the the following After the (Path has no impact affected node adjacent two cases: The successful type selection on the configured of 1. New access modification it equipment. modification, sequence). withparameter The parameter None subscriber. the thein the is valid TRMMAP. 2. Bandwidth modification affects the case ofthe After the node modification of has no impact adjacent new access of Theexisting successful the configured a subscriber of on the modification modification, it equipment. subscriber withparameter The parameter None and thein the the the is valid TRMMAP. bandwidth modification affects the case of the After the node modification of has no impact of adjacent new The access successful an existing configured a subscriber of on the modification it equipment. modification, subscriber. with the andparameter The parameter None the the is valid in the TRMMAP. bandwidth modification affects the case ofthe After the node has no impact modification of of adjacent new access successful an existing configured a subscriber it on the modification, equipment. subscriber. with the and thein the The parameter None is valid TRMMAP. bandwidth modification case of the After the modification of has no impact of new access successful an existing a subscriber it on the modification, equipment. subscriber. and thein the The parameter None is valid bandwidth modification case of the modification of has no impact of new access an existing a subscriber on the subscriber. equipment. and the The parameter None bandwidth modification modification of has no impact an existing on the subscriber. equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Not involved
Not involved
Not involved
successful modification, it is valid in the case of the new access of a subscriber If the and the is parameter bandwidth modified, the modification of admission rule ansubsequent existing ofthe If subscriber. new access parameter is services are modified, the affected (Path admission rule type selection of subsequent sequence). new access services are affected (Path type selection sequence).
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Transport
Transport
Not involved
None
Equipment
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
If the None parameter is modified, the modification admission rule has no impact The on the ofthe modification of equipment. If subsequent None newparameter The parameter None the access parameter is services are modification affects the modified, the affected (Path has no impact adjacent node admission rule type selection on the configured of subsequent sequence). equipment. with the new access The parameter None TRMMAP. services are modification After the affected (Path has no impact The selection on the successful type modification of equipment. modification, sequence). it None the parameter is valid in the affects the case ofthe The parameter adjacent node new access of cannot be configured a subscriber If thethe modified. Not involved None with the and parameter is The parameter TRMMAP. bandwidth modified, the modification After the modification of has no impact admission rule successful ansubsequent on the of existing it modification, equipment. subscriber. None new access is valid in the The parameter servicesthe case of are modification affected (Path has no impact new access of type selection on the a subscriber sequence). equipment. and the The parameter None bandwidth modification modification of has no impact an existing on the subscriber. equipment. None
Equipment
Equipment
Transport
Transport
Transport
Transport
Transport
Transport
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
The configured of modification If thethe factor withparameter the parameter is table. After the affects the modified, the successful adjacent node admission rule modification, configured of subsequent the parameter with the new access in The parameter takes effect TRMMAP. services are modification the following After the affected (Path has no impact two cases: The successful type selection on the 1. New access modification of equipment. modification, sequence). it The parameter None subscriber. the parameter is valid in the 2. Bandwidth modification affects the case ofthe modification of has no impact adjacent node new access of the existing configured a subscriber on the If thethe subscriber equipment. None with the and parameter is The parameter TRMMAP. bandwidth modified, the modification The After the modification of has no impact admission rule modification of on the successful ansubsequent of existing it the parameter equipment. modification, subscriber. None new access affects in the The parameter is valid the servicesthe adjacent node case of are modification affected (Path has no impact that access of new is The type selection on the configured of a subscriber modification If thethe factor equipment. sequence). withparameter The parameter None and the is the parameter the table. After bandwidth affects the modified, the modification successful modification of has no impact adjacent node admission rule modification, ansubsequent on the configured of existing the parameter equipment. subscriber. None with access new the takes effect in The parameter TRMMAP. services are modification the following After the (Path has no impact affected two cases: The successful type selection on the 1. New access modification of equipment. modification, sequence). it The parameter None subscriber. the parameter is valid in the 2. Bandwidth modification affects the case ofthe modification of has no impact adjacent node new access of the existing configured a subscriber on the If thethe subscriber equipment. None with the and parameter is The parameter TRMMAP. bandwidth modified, the modification The After the modification of has no impact admission rule modification of on the successful ansubsequent of existing it the parameter equipment. modification, subscriber. None new access affects in the The parameter is valid the servicesthe adjacent node case of are modification affected (Path has no impact that access of new is type selection on the configured a subscriber If thethe factor equipment. sequence). None with the and parameter is The parameter table. After bandwidth the modification modified, the successful modification of has no impact admission rule modification, ansubsequent on the of existing the parameter equipment. subscriber. new access in The parameter None takes effect services are modification the following affected (Path has no impact two cases: type selection on the 1. New access sequence). equipment. subscriber. The parameter None 2. Bandwidth modification modification of has no impact the existing on the subscriber equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
decrease of modification successful of SHO area, configured the SHO of the parameter modification, it increase area. with the But hysteresis for affects the is valid in the the the the UE TRMMAP. For UE that leaves the adjacent node case of the means Afteris the that enters SHO area, the that new access of decrease of successful SHO area, thatSHO area. configured a subscriber it the means modification, enlarging of with the factor The parameter increase ofUE the and But for the is valid in the table. After the modification the hysteresis Versions bandwidth thatSHO area. leaves the case of the means successful of modification of has no impact If the area, SHO number earlier than new access decrease of UEs of modification, on the an existing thatSHO area. BSC6900 a subscriber the means entering the V900R011 the parameter equipment. subscriber. None enlarging of and the for the UE area and the takes effect in The parameter But SHO area. For bandwidth modification the the UE the Versions that leaves number of the following that number modification of has no impact If theleaving earlier than SHO area, UEs enters the two cases: of UEs SHO area, anNew access on the that means the area the BSC6900 1. existing entering are V900R011 increase of subscriber. equipment. enlarging real equal, theof subscriber. The parameter Noneand the area hysteresis area. SHO ratio 2. Bandwidth modification the SHOof will Versions number means If the number earlier than modification of has no impact not be UEs leaving decrease of of UEs The affected. are BSC6900 the existing on the the area the the SHO area. entering larger the real V900R011 subscriber equipment. None the equal, the UE But for this area of valueand the SHO ratio will Versions that leaves the number of the parameter, not be The parameter SHO area, UEs leaving earlier than stronger the affected. are BSC6900 cannot be that means the area The capability of larger the modified. Not involved None the of enlarging real V900R011 equal, resisting this value ratio will the SHO area. Versions SHO of signal parameter, the If the number earlier than not be fluctuation. The parameter stronger the of UEs affected. The BSC6900 Thus, the of cannot be capability entering the larger the modified. Not involved ping-pong resisting the The parameter Noneandthis V900R011 area of be value effect can modification signal of the Versions number but parameter, resisted, has no impact fluctuation. of earlier than UEs leaving stronger the the varying Thus, the of BSC6900 on the the area are capability in the signal ping-pong real V900R011 None equipment. equal, the resisting The parameter None can to response be effect signal modification SHO ratio will Versions the handover resisted, but fluctuation. has no impact not be algorithm of earlier than the varying affected. Thus, theThe BSC6900 on the becomes in the signal larger the ping-pong None equipment. The parameter slower. this V900R011 response to value can effect of be modification the handover Versions parameter, the resisted, but has no impact algorithmtheof earlier than stronger the varying on the becomes of BSC6900 capability the signal in None equipment. V900R011 resisting The parameter slower. to response signal modification the handover Versions has no impact fluctuation. algorithm earlier than Thus, the on the becomes BSC6900 ping-pong None equipment. slower. The parameter effect can be V900R011 modification resisted, but Versions has no impact the varying of earlier than on the the signal in BSC6900 None equipment. V900R011 The parameter None response to modification the handover Versions has no impact algorithm earlier than on the becomes BSC6900 None equipment. slower. V900R011 The parameter modification has no impact on the equipment. None Versions earlier than BSC6900 V900R011
Transport
Transport
Transport
Transport
Transport
Radio
Radio
Radio
Radio
Radio
Radio
Not involved
None
Radio
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None For details of the timer, see ITU-T Q.714. None The modification is For details of not timer, see the recommended ITU-T Q.714. . The the When modification is network status not is poor, the recommended packet length . should not be too large. Otherwise, the path state is affected.
Radio
Not involved
Radio
Not involved
Transport
Not involved
Transport
Not involved
Transport
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Not involved
None
Equipment
Not involved
None
Radio
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
modification Versions has no impact earlier than on the BSC6900 equipment. None The parameter The larger the V900R011 modification value of the Versions has no impact parameter, the earlier than lower the on the BSC6900 probability the V900R011 of equipment. None The parameter The larger selecting modification value of the Versions neighboring has no impact parameter, the earlier than cells. The lower the on the smaller theof BSC6900 probability equipment. V900R011 The parameter None the value selecting modification parameter, the Versions neighboring has no impact higher the earlier than cells. The on the probability of BSC6900 smaller the equipment. V900R011 The parameter doing the value so. modification parameter, the Versions has no impact higher the earlier than on the probability of BSC6900 equipment. V900R011 The parameter doing so. modification has no impact on the equipment. The parameter None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Radio
Radio
Radio
Not involved
None
Radio
Not involved
Not involved
Not involved
modification has no impact The on the modification of equipment. None None the parameter The parameter modification does not has no impact affect the on the established None link, but equipment. SAAL The parameter None affect the next modification establishment has no impact of the SAAL on the link. equipment. None
Radio
Radio
Transport
Not involved
Not involved
Not involved
Not involved
Not involved
The parameter value of IgorTmr must be less than the value of "IntrTmr" set The parameter modification in "SET UIUTIMERAN has no impact DNUM".The on the IMA ID None equipment. None parameter identifies an modification IMA group. has no impact Normally, in on the the same equipment. Not involved None interface The parameter board, IMA ID modification must be has no impact unique. To on the avoid None using equipment. None the same IMA ID allocated The parameter on the peer cannot be NodeB, use modified.IMA Not involved None different The parameter ID on the modification BSC6900 side has no impact and the on the NodeB. equipment. None The parameter cannot be The IMA modified. Not involved None protocol The parameter version must be consistent with that on the peer. modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Equipment
Transport
Transport
Transport
Not involved
Transport
Not involved
Transport
Not involved
None
Radio
Not involved
None
Radio
Not involved
Radio
Not involved
Not involved
None
Radio
Not involved
Not involved
None
Radio
Not involved
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
Not involved
None
Equipment
Not involved
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None
Equipment
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
Not involved
None For the modification of modification the parameter, has no impact see the ITU-T on the Q.2110. equipment. None
Equipment
Transport
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
Radio
Not involved
None
Radio
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
Not involved
Not involved
Not involved
Not involved
None If the Inter RAT Inter Plmn Ho Allowed None is switched If the Intra off,Neighbor RAT Inter cells Ho Plmn belonging to Allowed None is different switched PLMNs in the off,Neighbor inter RAT cells should be to belonging removed. different
Radio
Radio
BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Radio
Not involved
Not involved
PLMNs in the intra RAT should be removed. Not involved None The parameter modification has no impact on the None equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
BSC6900 V900R011
Radio
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Radio
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. None
Radio
BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
BSC6900 V900R011
Radio
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
Not involved
None
BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
The loopback keeps Not involved None interrupting the services until the loopback is cancelled. None
Equipment
Transport
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
BSC6900 V900R011
Radio
Not involved
None
The greater the value of this parameter is, the more easily the event 1A is Not involved triggered. The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment.
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Not involved
None
Versions The lower the earlier than value of this BSC6900 None parameter is, V900R011 the more Versions easily the earlier than event 1B is BSC6900 Not involved triggered. V900R011 The parameter Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Not involved
Not involved
Not involved
Not involved
modification has no impact on the None The parameter equipment. The parameter None value of modification IntrTmr must has no impact be greater on the than the value equipment. None None of "IgorTmr" The parameter modification set in "SET UIUTIMERAN has no impact DNUM".The on the None equipment. None parameter modific ation has no impact on the equipment. Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
Radio
Radio
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Not involved
None
Transport
Not involved
The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
The parameter cannot be modified. Not involved None The parameter Negotiation can succeed only when the No_HC: None configuration disable the is consistent header on the local compression and peer function; ends. RTP/UDP/IP_ modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None
Transport
Transport
Transport
Not involved
HC: enable modification the has no impact RTP/UDP/IP/P on the PP function equipment. None The parameter cannot be modified. Not involved
Transport
Not involved
None
Transport
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
If the address] must transmission be set as type of Node follows: the is IUB-IP, peer IP IP [next hop address of the address] must PPP link, the be set as peer IP the follows: address of the peerparameter IP The group, MP address of cannot be the and the IP PPP link, modified. the Not involved None address in The parameter peer IP same network modification address of the segment as has no impact MP group, the FE/GE on the and the IP The port.IP in address of the equipment. The parameter None address same network modification NodeB cannot segment as has no impact use the the FE/GE IP on the configured port. equipment. address of The parameter None another modification NodeB. The has no impact IP address of on the NodeB None cannot equipment. None be the same The parameter modification as the IP has no impact address configured in on the None the BSC6900. equipment. The parameter None Otherwise, modification operation and has no impact maintenance on the channel fails. equipment. None This parameter cannot be modified.
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Transport
Transport
Transport
Equipment
Equipment
Not involved
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Transport
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Transport
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Radio
Not involved
The parameter modification IPPATH must has no impact be configured on the in advance. equipment. None The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. None
Transport
Not involved
Transport
Not involved
None
Equipment
Not involved
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Transport
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
Equipment
Not involved
None
Equipment
Not involved
None
Not involved
None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None
Radio
Equipment
Not involved If the mode is not consistent, will interrupt service until it is consistent.
modification has no impact The setting of on the None this parameter equipment. The parameter None must be modification consistent with has no impact that on the on the peer. equipment. None
Equipment
Equipment
The setting of this parameter The parameter must be modification consistent with has no impact that on the on the peer. equipment. The parameter None modification has no impact The setting of on the None this parameter equipment. The parameter None must be modification consistent with has no impact that on the of on the The setting peer. this parameter equipment. The parameter None must be modification consistent with has no impact that on the of on the The setting peer. this parameter equipment. The parameter None must be modification consistent with has no impact that on the on the peer. equipment. The parameter None modification has no impact on the equipment. The parameter None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Not involved If the mode is not consistent, will interrupt service until it is the mode is If consistent. not consistent, will interrupt service until it is the mode is If consistent. not consistent, will interrupt service until it is consistent.
Equipment
Equipment
Equipment
Equipment
Not involved
None
Equipment
Not involved If the mode is not consistent, will interrupt service until it is the mode is If consistent. not consistent, will interrupt service until it is consistent.
modification has no impact The setting of on the None this parameter equipment. The parameter None must be modification consistent with has no impact that on the of on the The setting peer. this parameter equipment. The parameter None must be modification consistent with has no impact that on the on the peer. equipment. The parameter None modification has no impact The setting of on the None this parameter equipment. The parameter None must be modification consistent with has no impact that on the of on the The setting peer. this parameter equipment. The parameter None must be modification consistent with has no impact that on the on the peer. equipment. None
Equipment
Equipment
Equipment
Not involved If the mode is not consistent, will interrupt service until it is the mode is If consistent. not consistent, will interrupt service until it is consistent.
Equipment
Equipment
Equipment
The setting of this parameter The parameter must be modification consistent with has no impact that used for on the It is on the peer. 1. This interworking equipment. The parameter None command is with products modification applicable to has no impact of other the boards manufacturers on the AOUa, POUa, equipment. Not involved . None AOUc, POUc, The parameter modification and OIUa. has no impact 2. It is used on the for Not involved None interworking equipment. The parameter None 1. This with products modification command is has no impact of other applicable to manufacturers on the the Not involved . boards equipment. The parameter None AOUa and modification POUa. has no impact 2. It is used on the for Not involved None interworking equipment. The parameter None with setting of modification The products of other this parameter has no impact manufacturers on the must be Not involved . equipment. If the mode is negotiated The parameter None not consistent, with setting of modification The that on will interrupt the parameter has no impact this service until it interconnecte on the must be is consistent. d side. equipment. Interrupt the negotiated The parameter None If the mode is not consistent, will interrupt service until it is consistent. service until negotiate successfully again. the Interrupt service until negotiate successfully again. with that on the interconnecte d side. modification has no impact on the equipment. The parameter None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Transport
Not involved
modification has no impact The modification of on the None the parameter equipment. The parameter None affects the modification detection has no impact sensitivity of on the the SAAL link. equipment. None
BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Transport
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved
None
Transport
Not involved
None
Equipment
Not involved
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Equipment
Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Transport
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Not involved
None
Not involved
None
Not involved
None
handover. Excessively small values of the parameter, however The parameter makes the modification target cell Versions has no impact easily enters earlier than on the the congestion BSC6900 equipment. V900R011 status. The parameter None The modification higher the has no impact parameter value, the on the BSC6900 more equipment. None difficult it V900R011 The parameter is for the intermodification frequency Versions has no impact blind earlier than on the BSC6900 handover equipment. None and V900R011 The parameter occurs, modification the easier it is Versions has no impact to guarantee earlier than on the the stability of BSC6900 equipment. The parameter the target cell. V900R011 modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Radio
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
The parameter cannot be modified. Not involved None The parameter The load EQ table is configured already. The load EQ table is configured already. modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Transport
Not involved
Transport
Not involved
Transport
Not involved
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Not involved
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Transport
Not involved
None
Equipment
Not involved
None
BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Not involved
None
Equipment
Not involved
None
Transport
Not involved
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Transport
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Transport
Not involved
None
Transport
Not involved
None
BSC6900 V900R011
Equipment
Not involved
None
BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Not involved
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. None
Transport
Not involved
None
Radio
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None
Radio
Equipment
Not involved
Not involved
modification has no impact The setting of on the None According to The parameter None this parameter equipment. the MTP3 must be load modification sharing consistent with has no impact principle, the on the that on the link selection equipment. peer. None mask must be set properly. If Thevalue is the parameter cannot be not set modified. the Not involved None properly, The parameter load sharing modification between has no impact MTP3 links The mask is on the may fail. equipment. calculated The parameter None according to the link set to a destination entity. The VCL loopback test can affect the service on this VCL. modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Equipment
Equipment
Transport
Transport
Not involved
Transport
Transport
Not involved
None
Transport
Not involved
Not involved
Not involved
The local IP The parameter address and modification peer IP must has no impact be configured on the in the None same equipment. None network segment. The The parameter peer IP cannot be address modified. the Not involved None cannot be The parameter same with the modification local IP has no impact address of the on the BSC6900. equipment. None
BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Transport
Transport
The parameter cannot be Not involved modified. Not involved None The cell both Interruption The cell end should be address of until the cell is should be the activated after SCTP is the activated deactivated in the parameter parameter for modification. None again. advance. the both end The parameter The interconnectio modification address of the has no impact n. The is the SCTP value on the can be parameter for Not involved None The services modified after equipment. The parameter None the are interrupted the interconnectio modification until the SCTP negotiation n. The value has no impact link is working with be peer on the can the normally. The services system. after equipment. modified The parameter None are interrupted the modification until the SCTP negotiation has no impact link is working with the peer on the normally. system. equipment. The parameter None The parameter modification has no impact can be modified when on the Not involved None The services "MODE" in the equipment. The parameter None are interrupted command modification until the SCTP "ADD has no impact link is working SCTPLNK" is on the normally. set to Client. equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Transport
Radio
BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Transport
Transport
Equipment
Transport
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
The parameter modification has no impact on the equipment. The parameter None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Not involved The services are interrupted the command modification until the SCTP "ADD It is valid when has no impact link is working SCTPLNK" is on the "LOGPORTFL normally. The services ON. AG[/PARA in equipment. The parameter None are interrupted the command until the SCTP "ADD link is working SCTPLNK" is normally. ON. modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None
modification It is valid when has no impact "LOGPORTFL on the None AG[/PARA in equipment. The parameter None
Transport
Transport
Equipment
Not involved
None
Equipment
Not involved
None 1.this If When the peer end is modification parameter unconditionall has no impact set to y changes the on the REMOTE_LO Not involved bits and None equipment. OP in the The parameter None check LOCAL_LOO modification message, the P, the service has no impact services are on this link is on the disrupted if Not involved affected until equipment. None None the switch is the loopback set to ON. is cancelled. When the 2. When the The parameter When the peer end switch layer to cannot is set upper be unconditionall OFF, the Not involved modified. Not involved None bearer is y changes the alarm IMAGRP, bits in the "Inconsistent IMAGRP is The parameter check Configurations reset after the message, the cannot beis at the Two Not involved loopback Not involved None services will modified. Ends of the The parameter canceled. not resume Link over the modification Otherwise, the unless the Ater Interface" has no impact state of the switch is set to will not be on the The loopback IMAGRP is OFF. reported. and equipment. keeps abnormal The parameter None interrupting upper layer modification the services service cannot has no impact until it is be on the cancelled. established. equipment. None
Equipment
Equipment
BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Equipment
Equipment
Transport
Equipment
to REMOTE_LO OP. You can change the loopback type The loopback from keeps REMOTE_LO The parameter interrupting OP to modification the services LOCAL_LOO has no impact until it is P in the similar on the cancelled. way. equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Not involved
None
Transport
Not involved
None
Transport
None
Transport
Not involved
The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. None
Transport
None
Equipment
Not involved
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Transport
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Transport
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Transport
should be reset after the modification. It is recommended that this The services parameter are interrupted should not be until the SCTP modified when link is working the system is normally. running.
The BSC6900 should be reset to validate the parameter modification. None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
The parameter cannot be modified. Not involved This parameter cannot be modified.
None
Transport
Not involved
Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Not involved
None
Radio
Not involved
None
Transport
Not involved
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. None
Transport
Not involved
None
Transport
Not involved
None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Not involved
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Transport
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None The value should be greater than None "MAXPATHR ETR" in the command "ADD SCTPLNK".
Not involved
None
Equipment
Not involved
Not involved
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Equipment
Transport
Not involved
None
BSC6900 V900R011
Radio
Not involved
None
BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Not involved
None
Equipment
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None For the modification of modification Versions the parameter, has no impact If earlier than see the ITU-T on the MaxFachPow BSC6900 Q.2110. equipment. V900R011 er is The parameter None excessively modification Versions has no impact low, the UE at earlier than the cell verge BSC6900 on the fails to receive V900R011 None equipment. None correctly the This services and Versions parameter earlier than signaling cannot be borne over the BSC6900 modified. Not involved None V900R011 FACH, resulting in the Versions influence on earlier than the downlink BSC6900 None Not involved common V900R011 The parameter None channel modification coverage and Versions has no impact the cell earlier than on the BSC6900 coverage. If None equipment. None The parameter MaxFachPow V900R011 modification er is Versions has no impact excessively earlier than high, other on the BSC6900 channels are V900R011 None equipment. None The parameter interfered, the modification downlink Versions has no impact power earlier than on the resources are BSC6900 None equipment. None occupied, and V900R011 This consequently Versions parameter the cell earlier than cannot be capacity is BSC6900 modified. Not involved influenced. V900R011 The parameter modification The adjacent has no impact node ID must on the be configured. equipment. None Versions earlier than BSC6900 V900R011
Equipment
Transport
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Not involved
Transport
Not involved
None
Not involved
None
If the value is too low, the cell HSDPA capacity may be reduces,is If the value leading to too high, waste in HSUPA HSDPA may services resources. If be congested. Not involved None The parameter the value is is If the value modification too high,the too low, has no impact HSDPA cell HSDPA on the services may capacity may equipment. The parameter be congested. be reduces, modification leading to has no impact waste in on the HSUPA equipment. The parameter resources. modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Not involved
Not involved
None The value of this parameter cannot be smaller None than the maximum PPPMUX subframe length. The number None sub-frame must be larger than 2 to enable the PPPMUX.
Radio
Radio
Transport
Transport
Not involved
None
Equipment
Not involved
Not involved
None For the modification of modification the parameter, has no impact see the ITU-T on the Q.2110. equipment. The parameter None The value should be smaller than None "MAXASSOC RETR" in the command "ADD SCTPLNK". modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
Transport
Not involved
Equipment
Not involved
Transport
Not involved
None
Radio
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
larger than the maximum multiplexing frame length wMuxMfl and the number For the The parameter sub-frame modification of modification Versions must be larger the parameter, has no impact earlier than than 2 as the see the ITU-T on the BSC6900 enabling Q.2110. of equipment. None V900R011 condition The parameter PPPMUX (the modification Versions relation has no impact earlier than between the on the BSC6900 maximum sub- equipment. None None V900R011 frame length The parameter modification Versions and the If the has no impact The larger the earlier than maximum value of this BSC6900 parameter multiplexing on the parameter is, V900R011 value is set None length equipment. frame The parameter None the the wider too low, the is: modification coverage of Versions cell MuxMaxSfL<= has no impact The larger the earlier than the of this throughput will value (wMuxMfl-8)/2 on the corresponding BSC6900 be too low.is, parameter If V900R011 ). equipment. None services will The cell the parameter the wider the Before be. When of should be value is set coverage the Versions performing Thehigh, will activated after downlink it the earlier than too larger the of this single-point value much the parameter coverage is bring corresponding BSC6900 positioning, parameter the None modification. exceeded, is, V900R011 interference. you need to The parameter services will the wider the uplink the remove GPS modification be. When of coverage and Versions The larger the earlier than downlink configuration has no impact downlink the of this value coverage is history on the corresponding BSC6900 coverage of parameter the exceeded, is, V900R011 records. equipment. None services will the service will the wider the uplink be. When of the become and Versions coverage downlink unbalanced. If earlier than The parameter the downlink is coverage of BSC6900 the valuesof cannot be corresponding coverage the exceeded, modified. Not involved these will V900R011 services the service will The parameter None uplink parameters be. When the modification becomesmall, Versions coverage and are too downlink unbalanced. has no impact It is uplink If earlier than configured downlink is the values of coverage the on the in the network BSC6900 of coverage will exceeded, the these None equipment. the service The parameter planning. bewill V900R011 probably uplink parameters becomethan modification smaller small, Versions coverage are too and has no impact unbalanced. If earlier than the downlink downlink the uplink of the valuesof on the coverage of coverage will BSC6900 these None equipment. the service The parameter the service.will V900R011 probably be parameters becomethan modification smaller small, Versions are too unbalanced. has no impact the downlink If earlier than the uplink of the values on the coverage of coverage will BSC6900 these None equipment. V900R011 The parameter the service. probably be parameters modification smaller small, Versions are too than has no impact the downlink earlier than the uplink on the coverage of coverage will BSC6900 None equipment. V900R011 The parameter the service. probably be modification smaller than Versions has no impact the downlink earlier than on the coverage of BSC6900 None equipment. the service. V900R011
Transport
Radio
Transport
Transport
Radio
Equipment
Transport
Radio
Radio
Radio
Radio
Radio
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
The lower the parameter value is, the bigger the scope for selecting the The parameter MBMS modification Versions services is, has no impact earlier than the more cell on the BSC6900 load is None equipment. None V900R011 The parameter decreased, modification the more has no impact effect there is on the on the MBMS BSC6900 None equipment. service. The parameter None At the V900R011 modification same time, the The has no impact cell overload is significantly BSC6900 modification of on the decreased the parameter equipment. None None V900R011 while the affects the impact on the Versions adjacent node The is parameter earlier than MBMS that cannot be BSC6900 services configured modified. Not involved None V900R011 becomes with the factor bigger. The table. After the Versions higher the successful The parameter earlier than parameter modification, cannot be BSC6900 the parameter Not involved value is, the V900R011 modified. None takes effect in The parameter smaller the Versions the following modification scope for has no impact selecting the earlier than two cases: on the BSC6900 MBMS 1.the "ADD If New access equipment. None None V900R011 subscriber. UMBMSALAR The parameter services is, 2. Bandwidth modification the less cell Versions MSERVICE" modification of has no impact load is earlier than specified decreased, the existing no on the BSC6900 service has the more subscriber Iu equipment. None V900R011 data on the effect there is interface This on the MBMS Versions within the parameter services, and earlier than period cannot be the quality of BSC6900 specified modified. by Not involved None The parameter services with V900R011 this parameter, an modification high priority, Versions has no impact however, can earlier than alarm is be BSC6900 reported.The on the None equipment. guaranteed. V900R011 parameter modification Versions has no impact earlier than on the BSC6900 equipment. Not involved None V900R011 The parameter modification has no impact on the equipment. None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Radio
Transport
Transport
Radio
Transport
Radio
Radio
Radio
Not involved
Radio
Not involved
Not involved
None
Radio
Not involved
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Not involved
None
Not involved
None
Not involved
modification Versions has no impact It is a waste of earlier than uplink on the BSC6900 resources if equipment. None V900R011 The parameter the uplink modification bandwidth of Versions has no impact an MBMS earlier than on the service in PTP BSC6900 equipment. The parameter None is high. V900R011 mode modification Therefore, it is Versions has no impact recommended earlier than on the the default BSC6900 equipment. value be used. V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Radio
Not involved
Not involved
None
Radio
Not involved
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
Radio
Not involved
None
Equipment
Not involved
None
Radio
Not involved
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. None
Transport
Not involved
None
BSC6900 V900R011
Radio
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
BSC6900 V900R011
Radio
Not involved
None
BSC6900 V900R011
Radio
Not involved
None
BSC6900 V900R011
Radio
Not involved
None
BSC6900 V900R011
Radio
Not involved
BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
Not involved
None
Not involved None The parameter modification has no impact on the equipment. None
Radio
Radio
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Transport
Not involved
The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved
None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Not involved
None
Transport
Not involved
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. None
Transport
Not involved
None
Radio
Not involved
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. The parameter None
Transport
Not involved
None
Transport
Not involved
Not involved
Not involved
None
modification Versions has no impact earlier than on the BSC6900 equipment. None V900R011 the higher of the success Versions earlier than ratio of the MBMS paging. BSC6900 Not involved None V900R011 The parameter However, modification more cell Versions has no impact power earlier than on the resources are BSC6900 equipment. V900R011 The parameter occupied. modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Radio
Radio
Not involved
None
Radio
Not involved
Transport
Not involved
Not involved
None
Radio
Not involved
None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact If on the MinPCPICHP equipment. The parameter None is ower modification has no impact on the equipment. excessively small, the cell coverage is affected.
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Transport
Not involved
None
Radio
Not involved
Not involved
To modify this The parameter parameter, run cannot be "STP modified. GATEWAYCH Not involved None The parameter K" first and modification then "STR has no impact GATEWAYCH on the K". equipment. The parameter None modification has no impact on the equipment.
Transport
Transport
If the parameter value is Not involved None None excessively low, the UE The parameter access cannot be success rate Not involved modified. Not involved None is affected. If the parameter value is The parameter excessively cannot be high, Not involved modified. Not involved None the UE The parameter probably tries modification the access has no impact attempt on the repeatedly Not involved None equipment. None a long The cell within Interruption The cell should be time, which until the cell is should be activated after increases the activated deactivated in the parameter uplink again. advance. modification. interference. This parameter cannot be modified.
Radio
Transport
Transport
Transport
Radio
Not involved
Not involved
None
Not involved None The parameter modification has no impact on the equipment. None
Radio
Radio
If the RAN Sharing The local end Support and of the SCTP MOCN link is the Support are both Not involved server and the Noneswitched application off,Redundant type is NBAP, operators the working should be mode should removed by Not involved None not be "RMV modified as UCNOPERAT the and only OR"client. For operator one the SCTP link exist. Not involved can of the M3UA application, the working mode can be Not involved None The services modified only are interrupted when the until the SCTP upper layer link is working application is normally. deleted.
Not involved
None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Radio
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None
Radio
Equipment
Transport
Not involved
None
Equipment
Not involved If the mode is not consistent, will interrupt service until it is consistent.
Not involved
Not involved
The setting of modification this parameter has no impact on the must be None equipment. negotiated The parameter None with that on modification the has no impact interconnecte on the The d side. equipment. None modification of the timer The parameter involves the cannot be For peer end. The modified. details, see of Not involved None modification The parameter ITU-T modification the timer Q2630.1 the has no impact or involves ITU-T peer end. For on the Q2630.2. equipment. details, see The parameter None ITU-T Q2630.1 or ITU-T Q2630.2. modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
Transport
Transport
Transport
Not involved
Transport
Not involved
None
Radio
Not involved
Not involved
Not involved
Not involved
None The modification of the management None proving status does not affect the established None link, but SAAL affect the SAAL link establishment mode.
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Transport
Transport
Transport
Not involved
None
Transport
Not involved
None
Equipment
Not involved
Not involved
Not involved
Not involved
Not involved
1. Set this None parameter to ON if you want modification has no impact to use the This built-in on the RNC parameter None None cell broadcast equipment. supports 2. Do The parameter only function. modification ASCII code not set this character to has no impact parameter set.The the on the ON when None equipment. None parameter RNC is modification connected to has CBS the no impact on the 3. The server. equipment. Not involved None parameter modification has no impact on the equipment. Not involved None The parameter cannot be modified. Not involved
Equipment
Radio
Radio
Equipment
Equipment
Not involved
None
Transport
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact A larger value of this on the parameter equipment. The parameter None to a leads modification larger has no impact A larger value guaranteed of this on the coverage area parameter equipment. None MBMS of the to a leads service in the larger case of heavy guaranteed load in the coverage area Not involved cell. MBMS of the service in the case of heavy load in the Not involved cell. The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Not involved
None
Radio
Not involved
Radio
Not involved
Radio
Not involved
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Equipment
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. None
Equipment
Transport
If the MTU configuration fails to meet the requirement of the network, the services will be adversely affected. is If the mode not consistent, will interrupt service until it is consistent.
The interconnectio n may be affected if this parameter is The modified. interconnectio n may be Negotiation affected if this can succeed parameter the only when is modified. configuration is consistent Negotiation on the local can succeed and peer the only when ends. configuration is consistent on the local and peer ends.
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None
BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Transport
Not involved
Transport
Not involved
Transport
Not involved
modification The adjacent has no impact node ID must on the be configured. equipment. None The parameter cannot be modified. Not involved None For the The parameter modification of modification the parameter, has no impact see the ITU-T on the Q.2110. equipment. None
Transport
Not involved
Transport
Not involved
Transport
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None The cell
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Not involved
None The parameter Interruption The cell modification should be until the cell is should be activated after should be activated deactivated in the parameter negotiated again. advance. with the peer modification. None The cell end, and Interruption The cell the should be until the cell is BSC6900 should be activated after should be activated deactivated in the parameter reset after again. advance. the modification. None modification. It The parameter modification is recommended has no impact on the that this The BSC6900 Not involved If the None equipment. None The services parameter transmission should be are interrupted should not be reset to type of Node until the SCTP modified when validate the is IUB-ATM, link is working the system is parameter [next hop The IP IP modification. None If the normally. running. must The parameter address]of the address transmission be the peer IP modification NodeB cannot type of Node address of the has no impact use the is IUB-ATM, configured IP on the configured [next hop IP Not involved The IP of IPOA PVC. address of the equipment. address] must The parameter None address anothercannot modification be the peer IP NodeB NodeB. of the address The has no impact use the IP address of configured IP on the configured NodeB cannot equipment. Not involved IPoA PVC. None address of be the same The parameter another modification as the IP NodeB. The has no impact address IP address of on the configured in NodeB Not involved None cannot equipment. thethe same The parameter None be BSC6900. Otherwise, modification as the IP operation and has no impact address maintenance on the configured in Not involved channel fails. equipment. the BSC6900. The parameter None Otherwise, modification The NodeB operation and has no impact must be maintenance on the configured Not involved channel fails. equipment. with the The parameter None electronic serial number during modification. modification has no impact on the equipment. None
Transport
Radio
Radio
Radio
Transport
Transport
Transport
Radio
Transport
Transport
Not involved
Transport
Not involved
The NodeB must be configured with the electronic serial number during modification.
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
Radio
Not involved
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
BSC6900 V900R011
Radio
Radio
Not involved
None
Radio
Not involved
None
Not involved
None
Not involved
None
Not involved
Not involved
Not involved
None
Not involved
None
network. Power control is available for PTP transmission, and thus the The parameter power modification consumption Versions has no impact in PTP mode earlier than is lower than BSC6900 on the that in PTM equipment. The parameter None In PTP V900R011 mode. modification mode, Versions has no impact however, the earlier than on the quantities of BSC6900 equipment. code, The parameter None CE, and V900R011 modification other Versions has no impact transmission earlier than resources on the BSC6900 increase with V900R011 equipment. None The parameter the number of modification users. Versions has no impact Therefore, the earlier than on the setting of this BSC6900 equipment. None V900R011 parameter should take Versions into earlier than consideration BSC6900 Not involved various V900R011 The parameter None resources, modification especially Versions has no impact bottleneck earlier than on the resources of BSC6900 equipment. The parameter None operators. The V900R011 modification value of this Versions has no impact parameter earlier than on the should not be BSC6900 equipment. V900R011 The parameter too large. modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Radio
Radio
Radio
Radio
Radio
Radio
Not involved
None
Radio
Not involved
None
Radio
None
Transport
Not involved
None
Equipment
Not involved
None
Transport
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
stricter the synchronizatio n process becomes, and the more difficult the When the synchronizatio value of n occurs. The The parameter "CsNriCfgMod lower the cannot be e" in "SET value is, the modified. UOPERATOR Not involved None the The parameter easier CFGPARA" is modification synchronizatio set to ON, or has no impact n occurs. If the value of the link quality on the "PsNriCfgMod equipment. is poor, None None a e" in "SET simple UOPERATOR synchronizatio The parameter CFGPARA" is n requirement cannot be set to leads to waste modified. SUPP_IUFLE Not involved None UE The parameter of the X, modification power and SUPP_MOCN has no impact increase of or on the uplink SUPP_IUFLE equipment. None interference. X_MOCN, the settings of NNSfTmr is valid.The None Not involved None parameter modification has no impact on the equipment. Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Radio
Equipment
Radio
Radio
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Transport
Not involved
None
Radio
Not involved
None
Radio
Not involved
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. None
Transport
Not involved
None
Radio
Not involved
None
Radio
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Before This modifying the parametera NodeB to cannot be R4 version of modified. Not involved None or earlier, deactivate the HSUPA and The parameter HSDPAbe cannot functions modified. of Not involved None The parameter this NodeB. modification Before modifying the has no impact on the NodeB to a None of R5 equipment. None version or earlier, This deactivate the parameter MBMS cannot be function of modified. the Not involved None NodeB.Before modifying the The parameter NodeB to a cannot be R6 version of modified. Not involved None or earlier, The parameter deactivate the modification EFACH has no impact function of the on the NodeB. equipment. None The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Transport
Radio
Equipment
Transport
Equipment
Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved None The parameter modification If the Versions has no impact parameter earlier than on the BSC6900 value is set None equipment. None the V900R011 too low, The parameter modification power of the Versions has no impact non-serving earlier than radio link will BSC6900 on the be low and the V900R011 None equipment. None data rate on non-servingis Versions If the value E- earlier than The parameter DCH will be excessively cannot be reduced, thus BSC6900 high, modified. Not involved None the link V900R011 The parameter impacting the out-of-sync modification transportis decision rate Versions has no impact of theto in earlier than likely UE soft handover BSC6900 on the happen. If the state. If the None equipment. V900R011 value The parameter None is parameter excessively modification value is too Versions has no impact low, out-ofearlier than high, is not sync the non- BSC6900 on the serving RL likely to None equipment. The parameter None send if V900R011 cannot But happen. modification RG link quality Versions the to the UE has no impact even in it may earlier than is poor, on the overloaded BSC6900 result in a None equipment. situation.the V900R011 The parameter waste of modification UE power and Versions has no impact increased earlier than on the uplink BSC6900 None equipment. interference. V900R011 The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Radio
Transport
Radio
Radio
Radio
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
The parameter cannot be modified. Not involved This parameter cannot be modified. This parameter cannot be modified.
None
Transport
Not involved
Not involved
None
Radio
Not involved
Not involved
None
Radio
When the Not involved value of None Not involved None "CsNriCfgMod The parameter This "SET modification e" in parameter UOPERATOR has no impact cannot be is on the CFGPARA" Not involved modified. equipment. None set to SUPP_IUFLE X or parameter The SUPP_IUFLE cannot be The RNC Not involved X_MOCN, or Not involved None The services modified. of After should be the value are interrupted modification, reset to "PsNriCfgMod until the thein "SET validate the e" RNC signaling point should be UOPERATOR parameter is available. reset. CFGPARA" is modification. None set to This SUPP_IUFLE parameter X or be cannot SUPP_IUFLE Not involved None Not involved modified. The parameter X_MOCN, NullNRI must modification has no impact be configured.Th on the Not involved None None e parameter equipment. modification has no impact on the Not involved equipment. Not involved None The parameter modification has no impact on the equipment. None
Equipment
Radio
Transport
Transport
Transport
Radio
Equipment
Not involved
None
Radio
The parameter modification has no impact If this If the value is parameter is on the Not big, will too involved None a larger equipment. set to The parameter None interrupt value, the modification Negotiation service until it bandwidth of has no impact can succeed is set to the the servicethe on the only when is normal value. smaller. Interrupt the configuration equipment. The parameter None service until is consistent modification Negotiation negotiate on the local can succeed has no impact successfully and peer the on the only when again. ends. configuration equipment. The parameter None is consistent on the local and peer ends. modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Transport
Transport
Not involved
Transport
Not involved
Not involved
Not involved
None The transmission The parameter priority of the cannot be service is modified. the Not involved None affected if The parameter The queue DSCP modification transmission value of the priority of the has no impact port is is on the service modified. the equipment. affected if The parameter None queue DSCP value of the port is modified. modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Transport
Transport
Transport
Not involved
Transport
Not involved
None
Equipment
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Not involved
Not involved
None
Not involved None The parameter modification has no impact on the equipment. None
Radio
Radio
The setting of None this parameter Not involved None The parameter must be modification consistent with has no impact that on the on the peer. equipment. None
Radio
Equipment
Not involved
None
Not involved
None
Equipment
Not involved
None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. None
Radio
Radio
Not involved
The parameter cannot be modified. Not involved None The parameter Modified according to practical networking. modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Transport
Not involved
Transport
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
If the value is set too small, The parameter the UEs on The parameter modification the cell edge Versions IPPATH must has no impact cannot receive earlier than be configured on the BSC6900 the paging in advance. equipment. None V900R011 message properly. This Versions problem The parameter earlier than affects the cannot be BSC6900 coverage of modified. Not involved None The parameter the downlink V900R011 modification common Versions has no impact channel and earlier than If the on the BSC6900 furthermore maximum None equipment. None the coverage V900R011 transmit power If the valueIf Versions of the cell. is of the PCPICH too great, the earlier than the value is The parameter is configured cell pilot may set too great, BSC6900 cannot be too large, the change it causes modified. Not involved None The parameter cell capacity to V900R011 fiercely, which interference modification will be to lead is easy other has no impact decreased to user call channels, lot because the BSC6900 on the drops. If a occupies the of system None equipment. value The parameter None is too downlink will V900R011 resources modification small, the cell Versions transmit be occupied may has no impact pilot theand power, earlier than and change on the affects the cell BSC6900 interference smoothly. None equipment. The parameter capacity. the V900R011 with the However, modification downlink Versions response has no impact traffic of the earlier than speed on the channels will BSC6900 cell breathing None equipment. The parameter be increased. V900R011 algorithm is modification decreased, Versions has no impact impacting the earlier than on the algorithm BSC6900 None equipment. performance. V900R011 The parameter cannot be modified. Not involved Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Transport
Transport
Transport
Equipment
Radio
Radio
Radio
Not involved
None
Transport
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
Transport
Not involved
None
Radio
The local IP address and peer IP must be configured in the same network segment. The The parameter peer IP cannot be address Not involved modified. the Not involved None cannot be The parameter same with the modification local IP has no impact address of the on the Not involved BSC6900. equipment. None The both end address of the The parameter SCTP be cannotis the parameter Not involved modified. for Not involved None the both end The interconnectio address of the The parameter n. The is the SCTP value cannot be can be parameter for Not involved modified.after Not involved None The services modified The parameter the are interrupted the interconnectio modification until the SCTP negotiation n. The value has no impact link is working with be peer on the can the normally. The services system. after equipment. modified The parameter None are interrupted the modification until the SCTP negotiation has no impact link is working with the peer on the normally. system. equipment. None The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Transport
Transport
Transport
Transport
Transport
Not involved
Transport
None
Transport
Not involved
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Transport
Not involved
None
Transport
Not involved
None
Radio
Not involved
None
Transport
The SCTP port number is the parameter for the negotiation. The value can Not involved None The services be modified are interrupted after the until the SCTP negotiation link is working with the peer normally. system.
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Transport
Not involved
None
Radio
Not involved
None
BSC6900 V900R011
Equipment
Not involved
None
BSC6900 V900R011
Equipment
Not involved
None
Equipment
Not involved
None
Transport
Not involved
None
BSC6900 V900R011
Radio
Not involved
None
BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
Not involved
When the network status is poor, the check period None not be should too small. Otherwise, the path state is affected.
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Equipment
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None This parameter cannot be modified. Negotiation fails if this parameter is modified.
Radio
Not involved None The parameter modification has no impact on the equipment. None
Radio
Transport
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Not involved
The parameter cannot be modified. Not involved None The parameter The adjacent node ID must be configured. modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Transport
Not involved
Transport
Not involved
None This parameter cannot be modified. This parameter cannot be modified. This parameter cannot be modified. This parameter cannot be modified. This parameter cannot be modified. This parameter cannot be modified. This parameter cannot be modified. This parameter cannot be modified.
Radio
Not involved
Not involved
None
Radio
Not involved
Not involved
None
Radio
Not involved
Not involved
None
Radio
Not involved
Not involved
None
Radio
Not involved
Not involved
None
Radio
Not involved
Not involved
None
Radio
Not involved
Not involved
None
Radio
Not involved
Not involved
None
Radio
Not involved
This parameter cannot be modified. This parameter cannot be modified. This parameter cannot be modified.
Not involved
Not involved
Not involved
None
of reading the PCH, waste the battery of the UE, affect the coverage of the downlink common channel, and finally affect Not involved None the cell coverage. If the value is too great, it causes Not involved None interference to other channels, occupies the Not involved None The parameter downlink modification transmit has no impact power, and on the affects the cell equipment. capacity.
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Radio
Radio
Not involved
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Equipment
The loopback keeps Not involved None interrupting the services until loopback The the loopback is keeps cancelled. None interrupting the services until the loopback is cancelled.
Equipment
Transport
None
Equipment
Not involved
None
Transport
Not involved
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. None
Transport
Not involved
Transport
Not involved
Not involved
None
Radio
Not involved
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Transport
Not involved
None
Transport
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Transport
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
canceled. When the loopback type is set to LOCAL_LOO P, you cannot The parameter directly modification change it to REMOTE_LO has no impact OP. You must on the None it to equipment. change The parameter None NO_LOOP modification first and then has no impact to on the REMOTE_LO equipment. None None OP. You can The parameter modification change the loopback type has no impact on the from None REMOTE_LO equipment. The parameter None OP to modification LOCAL_LOO has no impact P in the similar on the way. equipment. The parameter None 1. This modification command is has no impact applicable to on the the boards None equipment. None AOUa and POUa. The is used 2. It parameter cannot be for modified. interworking Not involved None The parameter with products modification of other has no impact manufacturers on the . equipment. None The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved This parameter cannot be modified.
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
Not involved
None
Not involved None The parameter modification has no impact on the equipment. None
Equipment
Equipment
Not involved
Not involved
Not involved
The parameter modification has no impact The on the modification of equipment. None None the parameter The parameter modification does not has no impact affect the on the established None link, but equipment. SAAL The parameter None affect the next modification establishment has no impact of the SAAL on the link. equipment. The parameter None modification has no impact on the This None parameter can equipment. The parameter None be added and modification modified. It has no impact cannot be on the deleted. equipment. None The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Radio
Transport
Not involved
Equipment
Not involved
Transport
Not involved
Transport
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
low,transmit but the uplink interference power will be may increase, saved. This and the uplink parameter capacity set must be may be affected. If carefully. In the valuethe addition, is excessively higher the high, parameter coveragethe value is, may Not involved be affected. The parameter smaller impact modification has no impact on the equipment. ConstantValu e has on the network performance.
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Radio
Not involved
The parameter cannot be modified. Not involved None The parameter ENABLE: the multiplexing frame None function of the PPP link is enabled. DISABLE: the None multiplexing frame function of the PPP link is This disabled. can parameter be added or modified but cannot be removed. This parameter cannot be modified. modification has no impact on the equipment. The parameter None
Transport
Not involved
Transport
Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
None
modification Versions has no impact earlier than on the BSC6900 equipment. None value of V900R011 If the The parameter modification Max preamble Versions has no impact retransmission earlier than is too small, on the BSC6900 the preamble V900R011 equipment. None The parameter power may fail modification to ramp to the Versions has no impact required earlier than on the BSC6900 value. This equipment. None may result in V900R011 UE access Versions failure. If it is earlier than too large, the BSC6900 UE will Not involved None V900R011 The parameter repeatedly modification increase the Versions has no impact power and earlier than on the make access BSC6900 equipment. V900R011 The parameter None attempts, modification which may Versions has no impact result in earlier than on the interference to BSC6900 equipment. V900R011 The parameter other UEs. modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Transport
Transport
Radio
Radio
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
Not involved
Not involved
The routing None priority is modification modified. In has no impact the case of multiple routes on the None same equipment. to the The parameter None signaling modification point, the has no impact route priority is on the affected. equipment. The parameter None modification has no impact on the equipment. None
Equipment
Equipment
Transport
Not involved
None
Transport
Not involved
The parameter cannot be modified. Not involved This parameter cannot be modified.
None
Transport
Not involved
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
Radio
Not involved
None
Radio
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
switches. If the SYS_INFO_U PDATE_FOR_ IU_RST switch is turned off, the The parameter BARRED_CE modification LL_FOR_CSD has no impact OMAIN_RST on the switch is None equipment. The parameter None invalid.The modification parameter modification has no impact has no impact on the None equipment. on the The parameter None equipment. modification When the has no impact parameter on the RNCAP_IMSI equipment. None None _HO_SWITCH The parameter is set to 1, the modification SNA_RESTRI has no impact CTION_SWIT on the None CH check box equipment. The parameter None under the modification Handover has no impact algorithm on the switch None equipment. None parameter in The parameter modification the MML has no impact command on the "SET None None UCORRMALG equipment. OSWITCH" cannot be selected at the same time. Not involved None The parameter cannot be modified. Not involved
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Radio
Radio
Equipment
Radio
Radio
Not involved
None
Transport
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None Not involved None 1. This The parameter command is The modification applicable toof cannot be parameter Not involved None the boards modified. affects the AOUa and adjacent node POUa. The is used that 2. It parameter The cannot be configured of for modification Not involved None modified. withparameter interworking The parameter the the factor table. After the with products modification affects the successful of other node has no impact adjacent modification, manufacturers on the configured the the . parameter equipment. None with takes effect in TRMMAP. the following After the two cases: The successful 1. New access modification it modification,of Not involved None None subscriber. the parameter is valid in the The parameter 2. Bandwidth modification affects the case ofthe modification of has no impact adjacent node new access of If the value is the existing configured a subscriber on the excessively If thethe subscriber with and the is equipment. The parameter None low, UEs at parameter TRMMAP. bandwidth modified, the modification the edge of The the After modification of has no impact cells fail in admission rule modification successful of on the ansubsequent network of existing it the parameter modification, equipment. subscriber. None searching, new access affects in the The parameter resulting in is valid the servicesthe adjacent are modification influence on case of node affected (Path has no impact that is new access of coverage of type selection on the configured a subscriber the downlink If thethe factor equipment. sequence). with and the is The parameter None common parameter the table. After bandwidth modified, the modification channel. This successful of has no impact finally affects modification admission rule modification, on the ansubsequent the cell of existing the parameter equipment. subscriber. coverage. If new access in The parameter None takes effect services are modification the value is the following affected (Path has no impact excessively two cases: high, the type selection on the 1. New access power sequence). equipment. subscriber. The parameter None resources are 2. Bandwidth modification wasted, and modification of has no impact other the existing on the channels are subscriber equipment. The parameter None interfered modification seriously, thus has no impact the cell on the capacity is None equipment. influenced.
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Transport
Equipment
Transport
Radio
Transport
Transport
Transport
Transport
Transport
Transport
Radio
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
modification, configured the parameter with the takes effect in TRMMAP. the following After the two cases: The successful 1. New access modification it modification,of subscriber. the parameter is valid in the The parameter 2. Bandwidth modification affects the case of the modification of has no impact adjacent node new access of the existing configured a subscriber on the If thethe subscriber with and the is equipment. The parameter None parameter TRMMAP. bandwidth modified, the modification The After the modification of has no impact admission rule modification successful of on the ansubsequent of existing it the parameter modification, equipment. subscriber. None new access affects in the The parameter is valid the servicesthe adjacent are modification case of node affected (Path has no impact that access of new is type selection on the configured a subscriber If thethe factor equipment. sequence). with and the is The parameter None parameter the table. After bandwidth modified, the modification successful of has no impact modification admission rule modification, ansubsequent on the of existing the parameter equipment. subscriber. new access in The parameter None takes effect services are modification the following affected (Path has no impact two cases: type selection on the 1. New access sequence). equipment. subscriber. The parameter None 2. Bandwidth modification modification of has no impact the existing on the subscriber equipment. The parameter None modification has no impact on the equipment. None The cell should be activated after the parameter modification. None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Transport
Transport
Transport
Transport
Transport
If the None parameter is Interruption The cell the modified, until the cell is should be rule admission activated deactivated in ofthe If subsequent again. advance. new access parameter is services are modified, the affected (Path admission rule type selection of subsequent Not involved sequence). new access Not involved services are affected (Path type selection sequence).
Radio
Radio
Transport
Not involved
Transport
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
The settings of None Not involved None PsInfoUpdFla g is valid only when the value of None "PsNriCfgMod Not involved None e" in "SET The UOPERATOR The settings of modification is CFGPARA" of parameter the to set None PsInfoUpdTmr Not involved None affects the SUPP_IUFLE is valid only adjacent X or thenode The when that is SUPP_IUFLE modification of value of configured X_MOCN.The the parameter "PsInfoUpdFla None factor Not involved None with the parameter affects the g" in "SET the table. After modification adjacent node UOPERATOR successful has no impact that is CFGPARA" is The modification, on theON.The configured of set to modification the parameter Not involved None equipment. withparameter parameter in the the factor takes effectthe table. After modification affects the the following successful has cases: adjacent node two no impact The modification, onNew access configured of 1. the modification Not involved None the parameter equipment. withparameter subscriber. in The parameter the the takes effect TRMMAP. 2. Bandwidth modification affects the the following After the node modification of has no impact adjacent two cases: Theexisting successful the configured of 1. New access on the modification modification, it equipment. subscriber withparameter The parameter None subscriber. the the is valid in the TRMMAP. 2. Bandwidth modification affects the case of the After the node modification of has no impact adjacent new access of Theexisting successful the configured a subscriber of on the modification it equipment. modification, subscriber with the andparameter The parameter None the the is valid in the TRMMAP. bandwidth modification affects the case ofthe After the node has no impact modification of of adjacent new access successful an existing configured a subscriber it on the modification, equipment. subscriber. with the and thein the The parameter None is valid TRMMAP. bandwidth modification case of the After the modification of has no impact of new access successful an existing a subscriber it on the modification, equipment. subscriber. and thein the The parameter None is valid bandwidth modification case of the modification of has no impact of new access an existing a subscriber on the subscriber. equipment. and the The parameter None bandwidth modification modification of has no impact an existing on the subscriber. equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Radio
Radio
Equipment
Equipment
Transport
Transport
Transport
Transport
Transport
Transport
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
successful configured modification, it with the is valid in the TRMMAP. case of the After the When new access of successful "CNProtclVer" a subscriber it modification, in "ADD and thein the The parameter is valid UCNNODE" is modification bandwidth case R5 or set toof the of has no impact modification of new access any later an existing a subscriber on the version, If the subscriber. None and the is equipment. PsNriCfgMode The parameter parameter bandwidth to modification may be set modified, the modification of has no impact SUPP_IUFLE admission rule ansubsequent on the existing X.The ofthe If subscriber. equipment. None parameter new access parameter is The parameter modification services are modification modified, the has no impact affected (Path has no impact admission rule on the type selection on the ofthe equipment. If subsequent equipment. sequence). None new access When parameter is The parameter The settings modification services are "CNProtclVer" modified, the of affected (Path has no impact in "ADD admission rule PSNRILength type selection on the UCNNODE" is ofthe only is subsequent equipment. If valid or sequence). None set to the new access when R6 is The parameter parameter any later services are modification value of the modified, version, affected (Path has no impact "PsNriCfgMod admission rule PsNriCfgMode type selection on the e" in "SET of subsequent may be set to equipment. sequence). UOPERATOR The parameter None new access SUPP_MOCN CFGPARA" is modification services are or to set affected (Path has no impact SUPP_IUFLE SUPP_IUFLE type selection on the X_MOCN.The X, sequence). equipment. None parameter SUPP_MOCN modification or has no impact SUPP_IUFLE on the X_MOCN.The equipment. Not involved None parameter modification has no impact on the equipment. Not involved None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Transport
Transport
Transport
Transport
Transport
Equipment
Equipment
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
The modification of the parameter The parameter affects the adjacent node modification has no impact that is The configured of on the modification equipment. None factor The parameter None withparameter the the table. After the modification affects the successful adjacent node has no impact modification, on the configured the parameter equipment. None None with the takes effect in The parameter TRMMAP. the following modification After the has no impact two cases: The successful 1. New access on the modification of equipment. modification, it None None subscriber. the parameter is valid in the The parameter 2. Bandwidth modification affects the case ofthe modification of has no impact adjacent node new access of the existing configured a subscriber on the If thethe subscriber equipment. None with the and parameter is The parameter TRMMAP. bandwidth modification modified, The the theof has no impact After modification admission rule modification of on the successful ansubsequent of existing it the parameter modification, equipment. subscriber. None new access affects in the The parameter is valid the servicesthe adjacent node case of are modification affected (Path has no impact that is new access of type selection on the configured a subscriber If thethe factor equipment. sequence). with and the is The parameter None parameter the table. After bandwidth modified, the modification successful modification of has no impact admission rule modification, on the ansubsequent of existing the parameter equipment. subscriber. new access in The parameter None takes effect services are modification the following affected (Path has no impact two cases: type selection on the 1. New access sequence). equipment. subscriber. The parameter None 2. Bandwidth modification modification of has no impact the existing on the subscriber equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Radio
Transport
Transport
Transport
Transport
Transport
Transport
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
Radio
Not involved
None
Equipment
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved Interrupt the service until negotiate successfully again. the Interrupt service until negotiate successfully again. the Interrupt service until negotiate successfully again.
FE port in the cannot be a NodeB cannot broadcast use 0 or 127. address or a The IP multicast address The line code address. The cannot be a must be IP address of broadcast consistent with The parameter the FE port a address or in modification thatNodeB Versions the on the multicast interconnecte has no impact earlier than and the The address. d side. HDB3 on the BSC6900 If this intranet IP of IP address (HDB3 of None code) equipment. None parameter is V900R011 address the AMI (AMI andFE port in The parameter set to ON, a OMU cannot modification Versions the NodeB code)the be in are has no impact PTM nonearlier than and the used for E1 streaming network IP on the BSC6900 intranet ports. B8ZS bearer segmentof None code) equipment. None might V900R011 address or (B8ZS The The parameter be pre-empted related. OMU cannot and AMI_ZCS modification by an MBMS Versions IP address of be in the (AMI code) in has no impact If this of a earlier than bearer the FE port parameter is BSC6900 network for on the are NodeB used If this priority higherON, prethe set to segment T1 ports. or parameter or a noncannot be the equipment. The parameter None is is V900R011 emption related. The MBMS bearer same as the modification set to ON, a Versions triggered IP address of PTM case configured IP has no impact in the PTM of earlier than when the FE port in streaming congestion. address in the on the BSC6900 streaming the NodeB bearer Thus, might V900R011 BSC6900. the equipment. None the cannot be The parameter bearer service be pre-empted MBMS same as the modification admission bydisrupted, Versions is an MBMS configured IP has no impact fails. Thataa a earlier than bearer of is, which has lower-priority BSC6900 address in the on the higher priority relatively great MBMS bearer V900R011 BSC6900. equipment. or a nonThe parameter None impact or a nonmodification MBMS bearer Versions because the MBMS bearer the case has no impact in released.of earlier than PTM bearer is congestion. on the servesthe more BSC6900 Thus, the Thus, None equipment. than one user. V900R011 The parameter ongoing MBMS service modification service is is disrupted, Versions has no impact disrupted and earlier than which has a on the call drop even BSC6900 relatively great None equipment. V900R011 The parameter occurs. impact modification because the Versions has no impact PTM bearer earlier than The frame serves more BSC6900 structure must on the None equipment. be consistent The parameter than one user. V900R011 with that on the frame The interconnecte structure must d side. be consistent with that on the frame The interconnecte structure must d side. be consistent with that on the interconnecte d side. modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Equipment
Transport
Transport
Transport
Radio
Radio
Radio
Transport
Transport
Transport
Not involved
None
Transport
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification does not impact the equipment. The parameter None modification does not impact the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
Not involved
Not involved
None The transmission priority of the service is None if the affected The queue DSCP transmission value of the priority of the port is is service modified. the affected if queue DSCP value of the port is modified.
Equipment
Radio
Transport
Not involved
Transport
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
CS2 protocol version is The backward transmission compatible priority of the with the CS1. service is the By default, affected if the The parameter parameter is The queueCS2. Versions set to DSCP modification transmission value of the earlier than When the the has no impact priority of port is not on the BSC6900 peer is service is modified. the equipment. None V900R011 compatible affected if The the local The parameter with queue DSCP modification Versions transmission CS2 of the value of the has no impact earlier than priority messages (the on the port is is BSC6900 service peer does not modified. the equipment. None V900R011 affected the The parameter process if queue DSCP modification Versions compatible value of the has no impact The larger the earlier than domain value of the port is BSC6900 according to on the parameter is, V900R011 modified. equipment. None protocol The parameter the more requirements), modification Versions difficult it is for the protocol has no impact earlier than the UE to version is set on the BSC6900 camp on the to CS1. equipment. None V900R011 The parameter cell. The modification smaller the Versions has no impact value of the earlier than on the parameter is, BSC6900 None equipment. the easier it is V900R011 The parameter None modification for the UE to Versions has no impact camp on the earlier than cell. But if the BSC6900 on the value is None equipment. V900R011 The parameter None excessively modification small, it is Versions has no impact possible that earlier than on the the UE cannot BSC6900 None equipment. V900R011 receive The parameter None the system modification Versions has no impact messages earlier than carried by on the BSC6900 PCCPCH. None equipment. None The parameter The larger the V900R011 When this modification value of the parameter is Versions has no impact parameter, the earlier than not set to any lower the UE BSC6900 on the value, the probability of V900R011 None equipment. adopts The parameter None the selecting modification corresponding Versions neighboring of the has no impact value The earlier than cells. current on the BSC6900 smaller the serving cell, None equipment. None the The parameter value through V900R011 added modification parameter, the Versions the ADD has no impact higher the UCELLSELRE earlier than on the probability of BSC6900 SEL None equipment. V900R011 The parameter doing so. command. modification Generally, this Versions has no impact parameter is earlier than on the not set to any BSC6900 None equipment. value. V900R011
Transport
Transport
Transport
Transport
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Not involved
None
Not involved
None
Not involved
None
carried by PCCPCH. When this parameter is not set to any value, the UE The parameter adopts the modification corresponding Versions has no impact value of the earlier than current on the BSC6900 serving equipment. None cell, The parameter added through V900R011 modification the ADD Versions has no impact UCELLSELRE earlier than on the BSC6900 SEL equipment. None V900R011 The parameter command. modification Generally, this Versions has no impact parameter is earlier than on the not set to any BSC6900 equipment. V900R011 The parameter value. modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None The value of RafcTmr can be negotiated None with the value of "RatcTmr" in "SET UIUTIMERAN None DNUM"; thus, the RNC can successfully initiate the If the RAN reset None before Sharing the CN reset Support and response of The value MOCN timer RatcTmrare Support can expires.The be negotiated both switched None parameter with the value off,Redundant modification of "RafcTmr" operators has no be in "SETimpact should on the by UIUTIMERAN removed equipment. DNUM"; "RMV thus, the CN can UCNOPERAT successfully OR" and only initiate the one operator reset before can exist. the RNC reset response timer expires.The None parameter modification has no impact on the equipment. This parameter cannot be modified. This parameter cannot be modified.
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
Radio
Not involved
Not involved
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
Radio
Not involved
Radio
Not involved
Not involved
None
Equipment
Not involved
Not involved
Not involved None The parameter modification has no impact on the equipment. None
Radio
Radio
Not involved
Not involved
None
Equipment
Not involved
Not involved
None
Radio
Not involved
Not involved
None
Not involved None The parameter modification has no impact on the equipment. None
Radio
Radio
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
timer for UE setting of the channel does release corresponding change form not work. (For waiting DCH to FACH example, response or the the channel when for UE timer change from channel setup to DCH, FACHdoes change form The parameter not work. does the timer (For DCH to FACH modification example, not work.) The or the the when channel has no impact retransmit change from on the channel timer is 2 DCH, FACH to None form equipment. change second. The The parameter None the timer does DCH to FACH modification RB work.) The not channel or the reconfiguratio has no impact retransmit change from on the n message timer is 2 DCH, FACH may None toThe equipment. second. does The parameter None the timer retransmit RB work.) The modification not times three reconfiguratio has no impact retransmit when the timer n message on the timer is 2 expires.The may None The equipment. None second. parameter retransmit RB modification three times reconfiguratio has no impact when the timer n message on the expires.The may equipment. Not involved None parameter retransmit modification three times has no impact when the timer on the expires.The equipment. Not involved None parameter modification has no impact on the equipment. Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Equipment
Radio
Radio
Radio
Not involved
None
Equipment
Not involved
None
Transport
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Transport
Not involved
None
Equipment
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Not involved
None
Equipment
Not involved
Not involved
Not involved
The None modification of the timer involves the peer end. For None see details, ITU-T Q2630.1 or ITU-T Q2630.2.
Radio
Radio
Transport
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
Not involved
Not involved
The None modification of the timer involves the peer end. For None see details, ITU-T Q2630.1 or ITU-T Q2630.2.
Not involved
None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
Transport
Not involved
None
Radio
Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
Not involved
The modification of the timer involves the peer end. For None see details, ITU-T Q2630.1 or ITU-T Q2630.2. Negotiation can succeed only when the None configuration is consistent Negotiation on the local can succeed and peer the only when ends. configuration is consistent on the local and peer ends.
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Transport
Equipment
Transport
Not involved
Transport
Not involved
None
Radio
Not involved
None
Equipment
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Equipment
Not involved
None
Radio
Not involved
None
Equipment
Not involved
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
The parameter cannot be The RNC modified. Not involved should be This parameter cannot be modified. This parameter cannot be modified. reset to validate the parameter modification.
None
Radio
Not involved
None
Radio
Not involved
Not involved
None
Not involved None The parameter modification has no impact on the equipment. None
Radio
Equipment
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
Equipment
Not involved
None
Transport
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None
Radio
Transport
Not involved
modification The resource has no impact group must on the exist. equipment. None The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. The parameter None
Transport
Not involved
None
Equipment
Not involved
Not involved
modification has no impact The modification of on the None the parameter equipment. The parameter None affects the modification detection has no impact sensitivity of on the the SAAL link. equipment. The parameter None modification has no impact on the equipment. None
Equipment
Transport
Not involved
None
Equipment
point to the single link. After the link to a signaling point is disconnected, The services the restart are interrupted procedure is until the performed. signaling point See the ITU-T is available. Q704.
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. None
Equipment
Radio
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None
Radio
Radio
Not involved
None
Radio
Not involved
Not involved
modification Change this has no impact parameter will on the None the equipment. impact The parameter None function modification interrelated has no impact with on the Parameter 1. equipment. The parameter None modification Change this has no impact parameter will on the None the equipment. impact The parameter None function modification interrelated has no impact with on the Parameter 10. equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
Transport
Not involved
Radio
Not involved
BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None
Radio
Radio
Not involved
None
Radio
Not involved
Not involved
modification Change this has no impact parameter will on the None the equipment. impact The parameter None function modification interrelated has no impact with on the Parameter 2. equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
The parameter modification has no impact on the equipment. The parameter None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
Not involved
modification Change this has no impact parameter will on the None the equipment. impact The parameter None function modification interrelated has no impact with on the Parameter 3. equipment. The parameter None modification Change this has no impact parameter will on the None the equipment. impact The parameter None function modification interrelated has no impact with on the Parameter 4. equipment. The parameter None modification Change this has no impact parameter will on the None the equipment. impact The parameter None function modification interrelated has no impact with on the Parameter 5. equipment. The parameter None modification Change this has no impact parameter will on the None the equipment. impact The parameter None function modification interrelated has no impact with on the Parameter 6. equipment. The parameter None modification Change this has no impact parameter will on the None the equipment. impact The parameter None function modification interrelated has no impact with on the Parameter 7. equipment. The parameter None modification has no impact on the equipment. None
Radio
Transport
Not involved
Radio
Not involved
Transport
Not involved
Radio
Not involved
Transport
Not involved
Radio
Not involved
Transport
Not involved
Radio
Not involved
Transport
Not involved
None
Radio
Not involved
Change this parameter will impact the function interrelated with Parameter 8.
The parameter modification has no impact on the equipment. The parameter None
BSC6900 V900R011
Transport
modification Versions has no impact earlier than Change this on the BSC6900 parameter will Not involved None the equipment. None V900R011 impact The parameter function The setting of modification If the value of interrelated this parameter has no impact this parameter with be on the BSC6900 must is too low, Not involved Parameter 9. equipment. None V900R011 If the mode is negotiated The parameter whether the not consistent, with that on modification UE is in the Versions will interrupt the has no impact If the value of earlier than stable low this parameter BSC6900 service until it interconnecte on the activity state The routing is too low, is consistent. d side. must equipment. V900R011 cannot the context The parameter None be whether The services be unique and modification determined. If Versions UE is in the are interrupted needs to be has no impact the value of earlier than stable low this parameter BSC6900 until the M3DE negotiated on the activity state is too high, the V900R011 is available. with the peer. equipment. None be cannot dedicated If determined. Versions channel of the value resources are earlier than this parameter BSC6900 wasted. This is too Not involved None Not involved None high, the V900R011 parameter dedicated should be set Versions channel on the basis of earlier than resources are the real-time BSC6900 wasted. This Not involved None Not involved service model. V900R011 parameter should be set Versions If the value of on the basis of earlier than this real-time BSC6900 the parameter Not involved None Not involved is too low, service model. V900R011 whether the Versions UE is in the earlier than stable low activity state BSC6900 Not involved None Not involved None be V900R011 The parameter cannot modification determined. If Versions has no impact the value of earlier than this parameter BSC6900 on the is too high, the V900R011 Not involved None equipment. The parameter None dedicated modification channel Versions has no impact resources are earlier than on the wasted. This BSC6900 Not involved None equipment. None V900R011 parameter should be set Versions on the basis of earlier than the real-time BSC6900 Not involved None Not involved service model. V900R011
Radio
Transport
Transport
Transport
Equipment
Radio
Radio
Equipment
Equipment
Equipment
Radio
Not involved
None
Not involved
this parameter is too high, the dedicated channel resources are wasted. This parameter should be set Versions on the basis of earlier than the real-time BSC6900 service model. V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
Not involved
None
Not involved
If the value of Versions If the value of earlier than this parameter this parameter BSC6900 is too high, the is too None high, V900R011 congestion period of may occur reporting 4A Versions over the earlier than event is commonand BSC6900 delayed channel. V900R011 congestion may occur of Versions If the value of If thethe value overparameter earlier than this parameter this common is too high, the BSC6900 is too high, channel. V900R011 congestion period of may occur reporting 4A Versions over the earlier than event is commonand BSC6900 delayed channel. V900R011 congestion may occur of Versions If the value of If thethe value overparameter earlier than this parameter this common is too high, the BSC6900 is too high, channel. V900R011 congestion period of may occur reporting 4A Versions over the earlier than event is commonand BSC6900 delayed channel. V900R011 congestion may occur of Versions If the value of If thethe value overparameter earlier than this parameter this common is too high, the BSC6900 is too high, channel. V900R011 congestion period of may occur reporting 4A Versions over the earlier than event is commonand BSC6900 delayed channel. V900R011 congestion may occur Versions over the earlier than common BSC6900 channel. V900R011
Radio
Radio
Not involved
None
Not involved
Radio
Not involved
None
Not involved
Radio
Not involved
None
Not involved
Radio
Not involved
None
Not involved
Radio
Not involved
None
Not involved
Radio
Not involved
None
Not involved
Radio
Not involved
None
Not involved
Radio
Not involved
Not involved
Not involved
The value None should be greater than "RTOMIN" and smaller None than "RTOMAX" in the command The value "ADD be should SCTPLNK". greater than "RTOMIN" in the command The value "ADD be should SCTPLNK". smaller than "RTOMAX" in the command "ADD SCTPLNK".
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Transport
Transport
Not involved
Transport
Not involved
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
The parameter cannot be modified. Not involved None The The parameter corresponding traffic index must be configured. modification has no impact on the equipment. None
Transport
Not involved
Transport
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Not involved
None
Transport
Not involved
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Transport
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Equipment
Not involved
None
Transport
Not involved
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Transport
Not involved
None
Transport
Not involved
None
Radio
Not involved
Transport
Not involved
Not involved
None
Radio
Not involved
None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Not involved
None
Transport
Not involved Interrupt the service until negotiate successfully again. the Interrupt service until negotiate successfully again.
This parameter of The setting cannot be DIP switches modified. Not involved None must be The parameter consistent with modification that on the has no impact interconnecte on the The setting of d side. this parameter equipment. The parameter None must be modification consistent with has no impact that on the on the peer. equipment. The parameter None modification has no impact on the equipment. None
Radio
Transport
Transport
Not involved
None
Equipment
Not involved
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Transport
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None The setting of this parameter must be None negotiated with that on the interconnecte d side.
Equipment
Equipment
Transport
local time cannot change between the start date and the end date. 3. The start month and of The setting end parameter this month of DST cannot must be be the same. negotiated with that on the interconnecte d side.
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Transport
Not involved
None
Transport
Not involved
None
Not involved
None
Radio
Not involved
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Transport
Not involved
None
Radio
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
Equipment
Not involved
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
Radio
Not involved
None
Radio
Not involved
None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Not involved
Not involved None The parameter modification has no impact on the equipment. None
Radio
Equipment
Not involved
Not Involved
None
Not involved None The parameter modification has no impact on the equipment. None
Radio
BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. The parameter None start UE will modification inter-system has no impact measurement on the s easily when equipment. The parameter None this parameter modification is large. So has no impact that better on the cells can be equipment. The parameter selected. modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Transport
Not involved
None
Equipment
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Equipment
Not involved
None
Radio
Not involved
None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. None
Radio
Radio
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved This parameter cannot be modified.
None
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
Not involved
None
Radio
Not involved
None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
The source IP Not involved None None address can be: local IP address of the PPP link None (PEUa/POUa/ Not involved None POS), local IP The address of the modification MP group of the parameter ((PEUa/POUa Not involved None None affects the ), IP address adjacent node of the that is Ethernet port The configured of the local of modification Not involved None None factor The parameter with the portparameter the table. After the modification (FG2a/GOUa), affects the successful and IP adjacent node has no impact modification, address of the on the configured the parameter equipment. localthe None with board. takes effect in TRMMAP. the following Afterparameter the The cases: two The successful cannot be 1. New access modification it modification,of Not involved None modified. subscriber. the parameter is valid in the The parameter 2. Bandwidth modification affects the case of the modification of has no impact adjacent node new access of the existing configured a subscriber on the If thethe subscriber with and the is equipment. The parameter None parameter TRMMAP. bandwidth modified, the modification After the modification of has no impact admission rule successful ansubsequent on the of existing it modification, equipment. subscriber. None new access is valid in the The parameter servicesthe case of are modification affected (Path has no impact new access of type selection on the a subscriber If the sequence). and the is equipment. The parameter None parameter bandwidth modified, the modification modification of has no impact admission rule ansubsequent on the of existing subscriber. equipment. new access The parameter None services are affected (Path type selection sequence). modification has no impact on the equipment. None
Radio
Radio
Radio
Radio
Transport
Transport
Transport
Transport
Transport
Transport
Not involved
Transport
Not involved
modification, the parameter takes effect in the following two cases: 1. New access subscriber. The parameter 2. Bandwidth modification modification of has no impact the existing on the subscriber equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Not involved
None This parameter cannot be modified. This parameter cannot be modified. This parameter cannot be modified. This parameter cannot be modified. This parameter cannot be modified. This parameter cannot be modified.
Radio
Not involved
Not involved
None
Radio
Not involved
Not involved
None
Radio
Not involved
Not involved
None
Radio
Not involved
Not involved
None
Radio
Not involved
Not involved
None
Radio
Not involved
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None
Radio
Equipment
Not involved
Not involved
modification has no impact The modified on the None equipment. parameter The parameter None takes effect modification after the has no impact BSC6900 is on the reset. equipment. The parameter None modification has no impact on the equipment. None
Equipment
Transport
Not involved
None
Equipment
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Transport
Not involved
The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved
None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Not involved
None
Transport
Not involved
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Transport
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. None
Equipment
Not involved
None
Equipment
Not involved
None
Not involved
None
Radio
Not involved
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Not involved None The services are interrupted until the signaling point is available. The services None are interrupted until the signaling point is available. None
Equipment
Transport
Transport
Not involved
Not involved
The parameter cannot be modified. Not involved None The parameter The port can modification be set to the has no impact DOWN or UP on the state when None equipment. None this parameter The parameter is modified. If modification has no impact the speed modes on the on the Noneand peer equipment. local The parameter None end are not modification consistent, the has no impact service can be on the interrupted. equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None The cell should be activated after the parameter modification. None
Transport
Radio
Transport
BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Not involved
None
Radio
Radio
Radio
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Radio
Not involved
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None
Transport
Not involved
None
Equipment
Not involved
None
Radio
Not involved
None
Radio
Not involved
Not involved
Not involved
Not involved
Not involved
modification The has no impact modification of on the the parameter equipment. None None affects the adjacent node The is that parameter cannot be configured modified. with the factor Not involved None The parameter table. After the modification successful has no impact modification, on the the parameter equipment. None None takes effect in The parameter the following modification has no impact two cases: 1. New access on the None equipment. subscriber. The parameter None 2. Bandwidth modification modification of has no impact the existing on the subscriber equipment. The parameter None modification has no impact on the equipment. None
Radio
Equipment
Radio
Radio
Transport
Not involved
None
Radio
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
configured with the TRMMAP. After the The successful modification it modification,of the parameter is valid in the The parameter modification affects the case of the adjacent node has no impact new access of configured a subscriber on the If thethe None with and the is equipment. The parameter None parameter TRMMAP. bandwidth modified, the modification The After the modification of has no impact admission rule modification successful of on the ansubsequent of existing it the parameter modification, equipment. subscriber. None new access affects in the The parameter is valid the servicesthe adjacent are modification case of node affected (Path has no impact that access of new is type selection on the configured a subscriber If thethe factor equipment. sequence). with and the is The parameter None parameter the table. After bandwidth modified, the modification successful of has no impact modification admission rule modification, ansubsequent on the of existing the parameter equipment. subscriber. new access in The parameter None takes effect services are modification the following affected (Path has no impact two cases: type selection on the 1. New access sequence). equipment. subscriber. The parameter None 2. Bandwidth modification modification of has no impact the existing on the subscriber equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. Not involved
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Transport
Transport
Transport
Transport
Transport
Not involved
None Clock sources and priorities are in one-toone mapping. Clock sources and priorities are in one-toone mapping.
Equipment
Not involved
Equipment
Not involved
Equipment
Not involved
Not involved
Not involved
The parameter cannot be Clock sources Not involved None modified. and priorities are in one-toThe mapping. one parameter cannot be Each modified. Not involved None backplane The parameter board 8K modification clock has only has no impact one clock on the source. equipment. None
Transport
Transport
Equipment
Not involved
Not involved
None For the modification of modification the parameter, has no impact see the ITU-T on the Q.2110. equipment. The parameter None modification has no impact on the equipment. None
The parameter modification has no impact on the equipment. The parameter None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Transport
Not involved
None
Equipment
Not involved
The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved
None
Equipment
Not involved
None
Transport
Not involved
None
Transport
Not involved
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification does not impact the equipment. The parameter None modification has no impact on the equipment. None
Transport
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Not involved
None
Equipment
Not involved
None
Not involved
None
Not involved
None
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None If the interface board clock source of the MPS subrack None is set, you can set the 8 kHz output clock source. For None the MPS and TCS, you can set the backplane board None 8k output clock as the clock source of the interface None For the board. EPS, you cannot perform the setting.
Not involved None The parameter modification Versions has no impact earlier than on the BSC6900 equipment. None V900R011 The parameter This modification parameter Versions has no impact determines earlier than on the the number of BSC6900 equipment. UEs over the V900R011 The parameter None modification Iur interface. If Versions has no impact the parameter earlier than is set too on the BSC6900 large, equipment. None too V900R011 The parameter much Iur modification resources will Versions has no impact be occupied; if earlier than on the the parameter BSC6900 equipment. V900R011 The parameter None too is set modification small, pingVersions has no impact pong earlier than on the relocation may BSC6900 equipment. occur. V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Radio
Radio
Radio
Radio
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
Radio
Equipment
Not involved
None
Equipment
Not involved
None
high, the power resources are wasted, and other channels are The parameter interfered modification seriously, thus has no impact the cell on the capacity is equipment. The parameter influenced. modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact UE will start intraon the frequency and equipment. The parameter None intermodification frequency has no impact measurement on the s easily when equipment. The parameter None this parameter modification is large. So has no impact that better on the cells can be equipment. The parameter selected. modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Radio
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Equipment
Not involved
Equipment
Not involved
Not involved
None
Not involved None The parameter modification has no impact on the equipment. None
Equipment
Equipment
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Transport
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. None
Radio
Equipment
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
Radio
Not involved
None
Radio
Not involved
None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Not involved
None
Equipment
Not involved
Not involved
None Not involved None For the The parameter modification of modification the parameter, has no impact see the ITU-T on the Q.2110. equipment. The parameter None modification has no impact on the equipment. None
Equipment
Transport
Not involved
None
Equipment
Not involved
None
Transport
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. None
Radio
Equipment
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None The cell should be activated after the parameter modification. None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Radio
Not involved
Radio
Not involved
Transport
Not involved
None
Equipment
Not involved
Equipment
Not involved
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
Not involved
CR529_NOT_ SUPPORT; when "CNProtclVer" in "ADD UCNNODE" is The parameter set to R6, modification there is no SupportCRTy has no impact on the pe. None None The parameter equipment. modification has no impact on the equipment. Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Equipment
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Transport
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Transport
Not involved
Not involved
modification has no impact Change this on the None parameter will equipment. The parameter None impact the modification patch function has no impact controlled by on the Change this switch 1. will equipment. parameter The parameter None impact the patch function controlled by Change this switch 10. will parameter impact the patch function controlled by Change this switch 2. will parameter impact the patch function controlled by Change this switch 3. will parameter impact the patch function controlled by Change this switch 4. will parameter impact the patch function controlled by Change this switch 5. will parameter impact the patch function controlled by Change this switch 6. will parameter impact the patch function controlled by Change this switch 7. will parameter impact the patch function controlled by switch 8. modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Transport
BSC6900 V900R011
Transport
Not involved
BSC6900 V900R011
Transport
Not involved
BSC6900 V900R011
Transport
Not involved
BSC6900 V900R011
Transport
Not involved
BSC6900 V900R011
Transport
Not involved
BSC6900 V900R011
Transport
Not involved
BSC6900 V900R011
Transport
Not involved
BSC6900 V900R011
Transport
Not involved
BSC6900 V900R011
Transport
Not involved
Change this parameter will impact the patch function controlled by switch 9.
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Radio
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Radio
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
Equipment
Not involved
None
Equipment
Not involved
None
Radio
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Not involved
None
Radio
Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Not involved
None
Radio
Not involved
800, 1000, 1200, 1400, 1600, 1800, 2000, 3000, 4000, 6000, 8000 ms}.The parameter modification has no impact on the equipment. Not involved
None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
Not involved
Not involved
The time value of T314 and T315 should Not involved None be both equal to 0 or both The time value greater than of T314 and T302*N302.Th T315 None should Not involved e parameter be both equal modification to 0 or both has no impact greater than on the T302*N302.Th equipment. e parameter Not involved modification has no impact on the equipment. Not involved
None
Radio
None
Radio
None
Radio
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Equipment
Not involved
None This parameter cannot be modified. This parameter cannot be modified. This parameter cannot be modified. This parameter cannot be modified. This parameter cannot be modified. This parameter cannot be modified. This parameter cannot be modified.
Radio
Not involved
Not involved
None
Radio
Not involved
Not involved
None
Radio
Not involved
Not involved
None
Radio
Not involved
Not involved
None
Radio
Not involved
Not involved
None
Radio
Not involved
Not involved
None
Radio
Not involved
Not involved
None
Radio
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None The cell should be activated after the parameter modification. None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Transport
Radio
Not involved
None
Radio
None
Transport
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Not involved
None This parameter cannot be modified. This parameter cannot be modified. This parameter cannot be modified.
Not involved None The parameter modification has no impact on the equipment. None
Radio
Radio
Not involved
Not involved
None
Radio
Not involved
Not involved
None
Radio
Not involved
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
Equipment
Not involved
None
BSC6900 V900R011
Equipment
Not involved
Not involved
Not involved
Not involved
TGW cannot address of be the same another TGW. as the IP The IP address of address configured in The IP TGW cannot thethe same address of the be BSC6900. Otherwise, TGW IP as thecannot The parameter operation and modification use the address maintenance has no impact configured IP in channel for address of the BSC6900. on the TGW fails. another TGW . equipment. Otherwise, The parameter None The IP operation and modification address of maintenance has no impact TGW cannot on the channel for be the same equipment. TGW fails. The parameter None as the IP modification address configured in has no impact the BSC6900. on the None equipment. Otherwise, The parameter None operation and modification maintenance has no impact channel for on the TGW fails. equipment. None
BSC6900 V900R011
Transport
BSC6900 V900R011
Transport
BSC6900 V900R011
Equipment
BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Not involved
None
Equipment
Not Involved
None
BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Not involved
The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved This parameter cannot be modified.
None
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Not involved None The parameter modification has no impact on the equipment. None
Radio
Transport
Not involved
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Transport
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
1. If you set "Upper time threshold of raised fault" 1. If you set and "Lower "Upper time time threshold threshold of of raised fault" The parameter raised fault" to "0", the modification and "Lower accumulated has no impact time threshold alarm blink of raised fault" on the duration is None the equipment. to "0", The parameter None counted but accumulated modification not reported. alarm blink has no impact 2. If "Upper duration is on the time threshold counted None but equipment. None of raised fault" The parameter not reported. is not "0", the modification 2. If "Upper has no impact value of time threshold on the "Lower time of raised fault" None equipment. None threshold of is not "0", the The parameter raisedof fault" modification value cannot be "0" has no impact "Lower time and you must on the threshold of ensurefault" None that equipment. None raised "Upper be "0" The parameter cannot time modification threshold of and you must has no impact raised fault" is ensure that on the greater time "Lower than equipment. None time None "Lower of threshold threshold of is raised fault" raised fault". The parameter smaller than 3. When to cannot be or equal "Upper time modified. Not involved None "Upper time The parameter threshold of threshold of raised fault" is modification raised fault". has no impact The"0" and not TRMMAP 3. When must be "Alarm switch on the "Lower time configured. equipment. of blinkingof The parameter None threshold filter" and is modification raised fault" "Switch of stat has no impact The"0" and not TRMMAP blinkingswitch must be alarm" on the "Alarm are configured. equipment. of blinking The parameter None "ENABLE", filter" and you cannot set modification "Switch of stat has no impact The TRMMAP "Alarm blink blinking alarm" on the must be to threshold" are configured. equipment. "0". The parameter None "ENABLE", Otherwise, set modification you cannot blink statistics has no impact "Alarm blink of the alarm is on the threshold" to not performed. equipment. "0". The parameter None Otherwise, modification blink statistics has no impact of the alarm is on the not performed. equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Equipment
Equipment
Equipment
Equipment
Transport
Transport
Transport
Transport
BSC6900 V900R011
Equipment
Equipment
Not involved
None
Transport
Not involved
Not involved
Not involved
The parameter modification has no impact Set on the TnlBearerTyp equipment. None None e according to The parameter modification the actual used transport has no impact Set on the type.The TnlBearerTyp equipment. None None parameter to e according modification the actual has no impact used transport on the type.The equipment. Not involved None parameter modification has no impact on the Before equipment. modifying this Not involved None The cell parameter, should be deactivate all activated after the cells under the parameter this NodeB. modification. None The parameter modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Equipment
Transport
Not involved
Transport
Not involved
Radio
Not involved
None This parameter cannot be modified. This parameter cannot be modified. This parameter cannot be modified. This parameter cannot be modified.
Equipment
Not involved
Not involved
None
Radio
Not involved
Not involved
None
Radio
Not involved
Not involved
None
Radio
Not involved
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
Radio
Not involved
None
Equipment
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. None
Transport
Not involved
Radio
Not involved
Not involved
None
Radio
Not involved
The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved This parameter cannot be modified.
None
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
Not involved
None
Radio
Not involved
This parameter cannot be modified. This parameter cannot be modified. This parameter cannot be modified.
Not involved
None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
Not involved
None
Radio
Not involved
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None
Radio
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
Not involved
Not involved
Not involved
modification has no impact The greater on the the value of None equipment. this parameter The parameter None modification is, the less has no impact probable the incorrect on the decision is. None equipment. None Yet the response of The parameter the event to cannot be the change of modified. Not involved None measured signals becomes slower None Not involved accordingly.
Radio
Radio
Transport
Radio
Not involved
None
Not involved
None
the value of this parameter is, the less probable the incorrect decision is. The parameter Yet the modification response of has no impact the event to on the the change of equipment. None measured signals becomes slower Not involved accordingly. The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Radio
Not involved
Not involved
Not involved
Not involved
If the value is excessively low, there are None few chances for the radio link to get The parameter synchronized. cannot be If the modified. Not involved None value is excessively high, the radio The parameter link failure cannot be process is modified. Not involved None The parameter probably modification delayed, and has no impact the downlink on the interference None equipment. The parameter increases. The parameter cannot be modified. Not involved The TRM load modification threshold must has no impact be configured on the already. equipment. The parameter None The TRM load modification threshold must has no impact be configured on the already. equipment. The parameter None The TRM load modification threshold must has no impact be configured on the already. equipment. None The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Transport
Equipment
Transport
Radio
Not involved
Transport
Not involved
Transport
Not involved
Transport
Not involved
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. None
Transport
Not involved
None
Radio
Not involved
The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved
None
Transport
Not involved
None
Transport
Not involved
The parameter cannot be modified. test, Not involved None Loopback The parameter which cause the service interruption on this link This parameter is valid only in the E1 mode of the AEUa. modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Transport
Transport
Not involved
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Not involved
None
Transport
Not involved
None
Equipment
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Transport
Not involved
None
Not involved
None
Radio
Not involved
None
Transport
Not involved
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Transport
Not involved
None
Transport
Not involved
None
Transport
Not involved
None
Transport
The parameter modification has no impact on the equipment. None The cell should be activated after the parameter modification. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Not involved
None
Transport
Not involved
The parameter cannot be modified. Not involved None The The parameter corresponding traffic index must be configured. modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Transport
Not involved
Transport
None
Transport
Not involved
None
Transport
Not involved
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None The cell should be activated after the parameter modification. None
Transport
Not involved None If the mode is not set back, will interrupt service until it is set back. None
Equipment
Transport
Radio
Radio
The parameter modification has no impact on the equipment. None The cell should be activated after the parameter modification. None The parameter modification has no impact on the equipment. None The cell should be activated after the parameter modification. None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
The None modification of Interruption Thetimer the cell until the cell is should be involves the activated deactivated in peer end. For again. advance. details, see ITU-T Q2630.1 or ITU-T Not involved Q2630.2. Not involved The adjacent node ID must be configured.
Radio
Radio
Transport
Not involved
Transport
Not involved
None
Transport
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. None
Radio
Equipment
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Versions The parameter earlier than cannot be BSC6900 modified. Not involved None The parameter The longer the V900R011 modification trigger time is, Versions has no impact the greater the earlier than effect of on the BSC6900 ignoring None equipment. None The longer the V900R011 The parameter sudden modification trigger time is, Versions changes is. has no impact the greater the earlier than Yet the effect of on the BSC6900 response to ignoring None equipment. None The longer changes of the V900R011 suddentime is, trigger the measured Versions changes is. the the greater value earlier than Yet the effect of becomes to BSC6900 response ignoring None Not involved slower. of the V900R011 The longer changes suddentime is, trigger the measured Versions changes is. the the greater value earlier than Yet the effect of becomes to BSC6900 response None Not involved ignoring of the V900R011 slower. The longer changes suddentime is, trigger the measured Versions changes is. the the greater value earlier than Yet the effect of becomes to BSC6900 response ignoring None Not involved slower. of V900R011 changes sudden the measured Versions changes is. value earlier than Yet the becomes to BSC6900 response None Not involved slower. of V900R011 changes the measured Versions value earlier than becomes BSC6900 None Not involved slower. V900R011 The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Equipment
Radio
Radio
Radio
Radio
Radio
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
The parameter The longer the modification trigger time is, Versions has no impact the greater the earlier than effect of on the BSC6900 ignoring equipment. None The parameter The longer the V900R011 sudden modification trigger time is, Versions changes is. has no impact the greater the earlier than Yet the effect of on the BSC6900 response to ignoring equipment. None The longer the V900R011 changes of suddentime is, trigger the measured Versions changes is. the the greater value earlier than Yet the effect of becomes to BSC6900 response ignoring Not involved slower. of the V900R011 The longer changes suddentime is, trigger the measured Versions changes is. the the greater value earlier than Yet the effect of becomes to BSC6900 response ignoring Not involved slower. of the V900R011 The longer changes suddentime is, trigger the measured Versions changes is. the the greater value earlier than Yet the effect of becomes to BSC6900 response Not involved ignoring of slower. V900R011 changes sudden the measured Versions If the value is changes is. is If the value value earlier than too high,the Yet high too the becomes to power load BSC6900 response Not involved system of slower. resources changes are V900R011 after wasted, which the measured Versions admission impacts value over earlier than may be system becomes large, which BSC6900 Not involved capacity. If the V900R011 impacts The parameter slower. too value is modification system low, resources Versions and earlier than has no impact stabilityfully can be leads to on the BSC6900 used and system equipment. None The parameter coverage may V900R011 congestion. If modification be impacted in Versions the value is has no impact case of the earlier than too low, on the insufficientof BSC6900 possibility equipment. V900R011 The parameter resources. user rejects modification may increase, Versions has no impact resulting in earlier than on the waste in idle BSC6900 equipment. V900R011 The parameter resources. modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
The parameter modification Versions has no impact earlier than on the BSC6900 None equipment. None V900R011 The backer The parameter position the modification Versions has no impact value is in earlier than {SF4,SF8,SF1 BSC6900 on the 6,SF32,SF64, V900R011 None equipment. The parameter None SF128,SF256, modification SFOFF}, the Versions If the value is has no impact less code and earlier than too high, the on the BSC6900 credit possibility of equipment. None None V900R011 resources wrong reserved for Versions rejection to handover earlier than uplink UEs. The BSC6900 admissions possibility of V900R011 None Not involved None increases, The parameter rejecting leading to modification The higher the Versions waste in uplink has no impact handover UE earlier than parameter is, admissions resources. If on the the higher and BSC6900 increases the the value is None equipment. None rate of V900R011 service performance too low, the the user in of UEs cannot Versions uplink handover is, earlier than be resources is and the more BSC6900 guaranteed. insufficient. The more None Not involved obviously the V900R011 However, The parameter None position cell load is because the modification frontal Versions decreased. possibility of has no impact the value is, earlier than However,the high the more putburst load on the value of the possibility of BSC6900 by ACK/NACK equipment. None None V900R011 parameter and its impact The parameter rejecting new givesis and rise to Versions are relatively modification UEs the fluctuation earlier than low, the value has no impact some idle and on the resources are BSC6900 can be set to congestion of None level, equipment. a low The parameter wasted. cell V900R011 the target representing modification load. The Versions the loose has no impact lower the earlier than admission on the parameter is, BSC6900 rule. equipment. V900R011 the smaller The parameter None modification amplitude of Versions has no impact the load earlier than decreases as BSC6900 on the a result of the V900R011 None equipment. The parameter None intermodification frequency Versions has no impact load earlier than on the handover, and BSC6900 None equipment. The parameter None the easier it is V900R011 modification to maintain Versions has no impact the stability of earlier than on the the target cell BSC6900 None equipment. load. V900R011
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
The lower the parameter value is, the easier the The parameter credit enters modification the congestion Versions has no impact status, the earlier than on the BSC6900 easier the equipment. Noneaction is V900R011 The parameter LDR modification triggered, and Versions has no impact the easier the earlier than user on the BSC6900 experience is V900R011 equipment. None The parameter affected. A modification lower code Versions has no impact resource LDR earlier than on the BSC6900 trigger equipment. None V900R011 The parameter threshold, modification however, Versions has no impact causes a earlier than higher on the BSC6900 admission equipment. None The parameter success rate V900R011 modification because the Versions has no impact resource is earlier than on the reserved. The BSC6900 equipment. V900R011 The parameter None parameter modification should be set Versions has no impact based on the earlier than on the operator's BSC6900 equipment. requirement. V900R011 The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Radio
Radio
Radio
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
LDR trigger and release thresholds are, the easier the system enters the The parameter preliminary modification congestion Versions has no impact status, the earlier than harder it is on the BSC6900 released from V900R011 equipment. None The parameter this status, the modification easier the Versions has no impact LDR action is earlier than on the triggered, and BSC6900 equipment. the more likely V900R011 The parameter None modification the users are Versions has no impact affected. But, earlier than the admission BSC6900 on the success rate V900R011 equipment. The parameter None becomes modification higher since Versions has no impact the resources earlier than on the are preserved. BSC6900 equipment. V900R011 The parameter None The carrier modification shall make a Versions has no impact trade-off earlier than on the between these BSC6900 equipment. V900R011 The parameter factors. modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Radio
Radio
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Not involved
None
Not involved
None
the admission success rate becomes higher since The greater the resources the preserved. are filtering The parameter coefficient is, The carrier modification the greater a Versions shall make the smoothing has no impact trade-off earlier than effect is these on the betweenand BSC6900 the less the equipment. V900R011 The parameter factors. random modification interference is. Versions has no impact Yet the earlier than on the BSC6900 response to equipment. None V900R011 changes of the measured Versions value earlier than becomes BSC6900 Not involved slower. V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
If the value is too high the Not involved system load None after admission is If the value may be over too high the large, which Not involved system load None impacts after system admission is If the value stability over may be and too high leads to the large, which Not involved system load None The parameter impacts after congestion. If modification system is admission is the value If the value has no impact stability over may be and too low, the too high the leads to on the large, which possibility of system load equipment. impacts The parameter Nonerejects If user after congestion. system modification may increase, admission the value is has no impact stability over resultingand may be in too low, the leads to idle on the waste which large, in of possibility system equipment. impacts The parameter resources. If user rejects congestion. system modification may increase, the value is stability in has no impact resultingand too low, the leads in on the waste to idle possibility of system equipment. The parameter resources. If user rejects congestion. modification may increase, the value is has no impact resultingthe too low, in on the waste in idle possibility of equipment. The parameter resources. user rejects modification may increase, has no impact resulting in on the waste in idle equipment. resources.
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
The parameter The lower the modification OLC trigger has no impact threshold is, the easier the on the system is in equipment. The parameter None the overload modification status. An has no impact excessively on the low value of equipment. the OLC The parameter None modification trigger has no impact threshold is very on the detrimental to equipment. The lower the The parameter None the system modification OLC trigger performance. has no impact threshold is, Theeasier the the lower the on the OLC release system is in equipment. The parameter None threshold is, the overload modification the harder the status. An has no impact system excessively on the releases the low value of equipment. the OLC The parameter overload. modification trigger has no impact threshold is very on the detrimental to equipment. The parameter None the system modification performance. has no impact The lower the on the OLC release equipment. The parameter None threshold is, modification the harder the has no impact system on the releases the equipment. The parameter overload. modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Not involved
None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. None
Radio
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Radio
Radio
Not involved
None
Radio
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Versions If the value is earlier than too high, the BSC6900 Not involved system load V900R011 None after Versions admission may be over earlier than large, which BSC6900 Not involved None V900R011 impacts system Versions stability and earlier than leads to BSC6900 Not involved system None V900R011 congestion. If Versions the value is earlier than too low, the possibility of BSC6900 Not involved Nonerejectsthe V900R011 The The parameter user longer trigger time is, modification may increase, Versions has no impact the greater the earlier than resulting in effect of idle BSC6900 on the waste in ignoring equipment. The longer The parameter resources. the V900R011 sudden modification trigger time is, Versions changes is. has no impact the greater the earlier than Yet the effect of on the BSC6900 response to ignoring equipment. None V900R011 changes of sudden the measured Versions changes is. value earlier than Yet the becomes to BSC6900 response Not involved slower. of V900R011 changes the measured Versions value earlier than becomes BSC6900 Not involved slower. V900R011
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Not involved
None
Not involved
effect of ignoring sudden changes is. Yet the response to changes of the measured value becomes slower.
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Transport
Not involved
None
Not involved
None
Equipment
Not involved
None
Not involved
None
Equipment
Not involved
None
Not involved
None
Equipment
Not involved
None
Not involved
None
Equipment
Not involved
None
Not involved
None
Equipment
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Equipment
Transport
Not involved
None
Radio
Not involved
The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved
None
Transport
Not involved
None
Transport
Not involved
The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved This parameter cannot be modified. This parameter cannot be modified. This parameter cannot be modified. This parameter cannot be modified. This parameter cannot be modified. This parameter cannot be modified. This parameter cannot be modified. This parameter cannot be modified. This parameter cannot be modified. This parameter cannot be modified.
None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Not involved
None
Transport
Not involved
Not involved
None
Radio
Not involved
Not involved
None
Radio
Not involved
Not involved
None
Radio
Not involved
Not involved
None
Radio
Not involved
Not involved
None
Radio
Not involved
Not involved
None
Radio
Not involved
Not involved
None
Radio
Not involved
Not involved
None
Radio
Not involved
Not involved
None
Radio
Not involved
Not involved
None
Radio
Not involved
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None The NodeB must be configured None with the electronic serial number during modification.
Radio
Not involved
Radio
Not involved
Transport
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Not involved
None
Equipment
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Equipment
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Equipment
Not involved
The parameter cannot be The modified. configuration Not involved None The parameter data must be the same as that of the peer system. modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Transport
Transport
None
Transport
Not involved The services are interrupted until the SCTP link is working normally. The services None
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Transport
Transport
are interrupted until the SCTP Incorrect link is working setting of this normally. is None If the mode parameter can not set back, will interrupt service until it is set back. lead to access failure to the target IP address.
Transport
Transport
The parameter Incorrect cannot of this setting be Not involved modified. can Not involved None If the mode is parameter The parameter not set back, lead to access modification will interrupt failure to the has no impact Incorrect service until it target IP this on the setting of is the mode is address. can equipment. If set back. parameter The parameter None not set back, will interrupt service until it is set back. lead to access failure to the target IP address. modification has no impact on the equipment. None
Transport
Transport
Transport
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
The configured of modification withparameter the factor the existing The After the table. the affects networking successful adjacent can be node modification, configured affected when the parameter withrelation the the takes effect in The parameter TRMMAP. between the modification the following After the VLAN and the has no impact two cases: The successful DSCP are 1. New access on the modification of equipment. modification, it reset. None subscriber. the parameter is valid in the The parameter 2. Bandwidth modification affects the case ofthe modification of has no impact adjacent node new access of the existing configured a subscriber on the If thethe subscriber equipment. None with the and parameter is The parameter TRMMAP. bandwidth modified, the modification The After the modification of has no impact admission rule modification of on the successful ansubsequent of existing it the parameter equipment. modification, subscriber. None new access affects in the The parameter is valid the servicesthe adjacent node case of are modification affected (Path has no impact that access of new is type selection on the configured a subscriber If thethe factor equipment. sequence). None with the and parameter is The parameter table. After bandwidth the modification modified, the successful modification of has no impact admission rule modification, ansubsequent on the of existing the parameter equipment. subscriber. new access in The parameter None takes effect services are modification the following affected (Path has no impact two cases: type selection on the 1. New access sequence). equipment. subscriber. The parameter None 2. Bandwidth modification modification of has no impact the existing on the subscriber equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
The parameter cannot be The modified. configuration Not involved None The parameter data must be the same as that of the peer system. modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None The cell should be activated after the parameter modification. None
Transport
Transport
BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
Not involved
None
Radio
Not involved
None
less frequently the AMRC mode is adjusted. In addition, the response to measurement reports becomes slower Not involved accordingly. The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Radio
Not involved
None
Radio
Not involved
None
Radio
Not involved
The parameter cannot be modified. Not involved None For the The parameter modification of modification the parameter, has no impact see the ITU-T on the Q.2110. equipment. The parameter None modification has no impact on the equipment. None
Transport
Not involved
Transport
Not involved
None
Equipment
Not involved
The parameter cannot be modified. Not involved None The parameter modification has no impact The on the conversion NoneE1 to T1 equipment. from The parameter None or from T1 to modification E1 takes has no impact effect after the on the board is reset. equipment. None
Transport
Not involved
Equipment
Transport
Not involved
None
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Not involved
The parameter cannot be modified. Not involved None The parameter modification has no impact on the equipment. The parameter None modification has no impact on the equipment. The parameter None modification has no impact on the equipment. None
Transport
Not involved
None
Radio
Not involved
None
Equipment
Not involved
None
Equipment
Not involved
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. None
Radio
Equipment