Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Search
Electrical Film
: EM6 : Garfilm EM6 is a Milky White film specially developed as an insulating material for rotating electrical machines and exhibits superior thermal ageing performance compared to normal polyester films.
Back
Properties
Unit
Test Method
EM6
36 19.8
50 14.28
75 9.5
100 7.14
190 3.76
250 2.86
300 2.38
350 2.04
-Kg/cm2 Kg/cm
2
ASTM-D-882 ASTM-D-882
2000 2000
2000 2000
2000 2000
2000 2000
1900 1900
1900 1900
1900 1900
1700 1700
1600 1600
% % -
ASTM-D-1003
50.0
50.0
60.0
70.0
80.0
85.0
92.0
95.0
95.0
% %
ASTM-D-1204 ASTM-D-1204
1.2 0.2
1.2 0.2
1.2 0.2
1.2 0.2
1.0 0.2
1.0 0.2
1.0 0.2
1.0 0.2
1.0 0.2
% % Deg C
2.0 1
2.0 1
2.0 1
2.0 1
2.0 1 250
2.0 1
2.0 1
2.0 1
2.0 1
20 Deg C 50 Deg C Specific Heat @ 25 Deg C 5 Electrical Break Down Voltage (2" Electrode) Surface Resistivity Volume Reistivity Dielectric Constant Permitivity 23 Deg C, 50 Hz 23 Deg C, 1kHz 23 Deg C, 10kHz 0 Deg C, 50 Hz
36x 10 23 x 10
-6 -6
(MD) (TD)
0.32
KV Ohm Ohm/m
7.5
9.5
12.5
13.5
18.5
19.5
21.5
22.5
50 Deg C, 50 Hz 100 Deg C, 50 Hz 150 Deg C, 50 Hz Dissipation Factor 23 Deg C, 50 Hz 23 Deg C, 1kHz 23 Deg C, 10kHz 0 Deg C, 50 Hz 50 Deg C, 50 Hz 100 Deg C, 50 Hz 150 Deg C, 50 Hz 6 ChemicalResistance Dilute Acids & Alkalis Concentrated Alkalis Concentrated Hydrochloric Acid Concentrated Sulphuric Acid Grease, Oils and Fats
Organic Solvents, Alcohol & Hydrocarbons
Ketones, Esters and Chlorinated compunds
3.27 3.35 3.65 IEC 250 0.002 0.0055 0.011 0.004 0.0015 0.007 0.006
Good Poor Fair Poor Good Good Fairly Good Poor GPL - Garware Polyester Ltd (Internal Method) NA : Not Applicable "UL" approved-UL File no - E110983 on www.ul.com RoHS Complied
Disclaimer : The data given above has been obtained using standard test procedure on defined specimens. The result obtained should therefore only be regarded as a general guide to material properties and not as design data.