Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
G85 G86 G87 G90 G91 G92 G92 G94 G95 G96 G97 G98 G99
Bore in, bore out; Mill and Lathe Bore in, rapid out; Mill and Lathe Back boring cycle; Mill Absolute programming Incremental programming Reposition origin point; Mill Thread cutting cycle; Lathe Per minute feed; Mill Per revolution feed; Mill Constant surface speed control; Lathe Constant surface speed cancel Per minute feed; Lathe Per revolution feed; Lathe
CNC-M code specificationsM00 M01 M02 M03 M04 M05 M06 M08 M09 M10 M11 M19 M30 M97 M98 M99 Program stop; Mill and Lathe Optional program stop; Lathe and Mill Program end; Lathe and Mill Spindle on clockwise; Lathe and Mill Spindle on counterclockwise; Lathe and Mill Spindle off; Lathe and Mill Tool change; Mill Coolant on; Lathe and Mill Coolant off; Lathe and Mill Chuck or rotary table clamp; Lathe and Mill Chuck or rotary table clamp off; Lathe and Mill Orient spindle; Lathe and Mill Program end, return to start; Lathe and Mill Local sub-routine call; Lathe and Mill Sub-program call; Lathe and Mill End of sub program; Lathe and Mill