Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
www.galtronics.com
Copyright 2010 Galtronics Corporation Ltd. Proprietary Information. All rights reserved. Galtronics reserves the right to modify or amend any antenna or specification without prior notice.
Model No: 04108182-04278 3.3 - 3.8 GHz, Dual Slant 45, 17.5 dBi Gain, H60, V5.4
ELECTRICAL SPECIFICATIONS Frequency Band Polarization Antenna Structure Impedance VSWR Inter-Port Isolation Intermodulation Input Connector Type / Location Gain Electrical Downtilt Horizontal Beamwidth Vertical Beamwidth Front to Back Ratio Upper Sidelobe Suppression Null Fill Input Power Model No: 04108182-04278 3.3-3.8GHz Dual slant 45 (45) 4 Ports / 2 columns 50 1.8:1 25dB < -140dBc for 2 x 20W carriers 4x N-Type 17.5dBi 0 60 5.4 25dB 18dB 17dB 4 x 250 Watt
MECHANICAL SPECIFICATIONS Operating Temperature Survival Wind Speed Wind Loads (100mph; 160km/h; 45m/s) Antenna Weight Dimensions (LxWxD) -55 to +70C 125mph (200km/h ; 55m/s) Front: 71.9 lbf (320 N) ; Side: 26.9 lbf (120 N) 6.5 - 7 kg 900mm x 300mm x 85mm
GMI0809A
60 Elevation Pattern
60 Azimuth Pattern
Copyright 2010 Galtronics Corporation Ltd. Proprietary Information. All rights reserved. Galtronics reserves the right to modify or amend any antenna or specification without prior notice.
www.galtronics.com
Model No: 04108182-04278 3.3 - 3.8 GHz, Dual Slant 45, 17.5 dBi Gain, H60, V5.4
Environmental Conditions
Galtronics base station antennas are designed to work under the environmental conditions as described in ETSI 300-019-1-4 Class 4.1E, and have passed the tests as described in ETSI 300-019-2-4. For vibration and earthquake requirements, the antenna has proved to withstand conditions as described in ETSI EN 300 019-1-4 and 4.4.1 of Telcordia GR-63-CORE. To ensure the reliability of the antennas after enduring transportation, the packaged equipment can withstand conditions as described in ETSI EN 300 019-1-1 Class 1.2, ETS 300 019-1-2 Class 2.3, ETS 300 019-1-2 Class T2.3 and 4.1.1.1 and 4.1.1.3 of Telcordia GR-63-CORE, and has passed tests accordingly. The sturdy construction of the antenna guarantees that the antennas will survive wind loads as specified in the mechanical specification section, and have been designed and tested according to the EIA222F standard.
Suitable For Panels With Max Height Suitable For Antennas With Max Weight Material Material For Bolts and nuts Weight Suitable For Pole Diameter
1200 mm 8 kg / 17.6 lbs 3 mm Steel, Zinc and Powder Coated Stainless Steel Approximately 4 kg / 8.8 lbs 50-153 mm / 2-6 inches
Note: Detailed mounting instructions are provided with each antenna. The instructions must be followed carefully, to ensure proper tilt angles, and to ensure proper mounting torques.
GMI0809A
Copyright 2010 Galtronics Corporation Ltd. Proprietary Information. All rights reserved. Galtronics reserves the right to modify or amend any antenna or specification without prior notice.
www.galtronics.com