Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Goulds Pumps
Submersible Sewage Pump
Prosurance available for residential applications.
Wastewater
Goulds Pumps is a brand of ITT Water Technology, Inc. - a subsidiary of ITT Industries, Inc. www.goulds.com
IT T
aPPLICatIONs Specifically designed for the following uses: Homes Water transfer Sewage systems Light industrial Dewatering/Effluent Commercial applications Anywhere waste or drainage must be disposed of quickly, quietly and efficiently. sPeCIFICatIONs Pump Solids handling capabilities: 2" maximum. Capacities: up to 220 GPM. Total heads: up to 81 feet TDH. Discharge size: 2" NPT threaded companion flange as standard. 3" option available but must be ordered separately. (Order no. A1-3) Temperature: 104F (40C) continuous 140F (60C) intermittent. MOtOrs Fully submerged in high grade turbine oil for lubrication and efficient heat transfer. All ratings are within the working limits of the motor. Class B insulation on 13-112 HP models. Class F insulation on 2 HP models. Single phase (60 Hz): Capacitor start motors for maximum starting torque. Built-in overload with automatic reset.
METERS FEET 100 0 90 5
TOTAL DYNAMIC HEAD
GOuLDs PuMPs
Wastewater
SJTOW or STOW severe duty oil and water resistant 13 1 HP models have NEMA three prong grounding 1 HP and larger units have bare lead cord ends.
Three phase (60 Hz): Class 10 overload protection must be provided in separately ordered starter unit. STOW power cords all have bare lead cord ends. Designed for Continous Operation: Pump ratings are within the motor manufacturer's recommended working limits, can be operated continuously without damage when fully submerged. Bearings: Upper and lower heavy duty ball bearing construction. Power Cable: Severe duty rated, oil and water resistant. Epoxy seal on motor end provides secondary moisture barrier in case of outer jacket damage and to prevent oil wicking. Standard cord is 20'. Optional lengths are available. Motor Cover O-ring: Assures positive sealing against contaminant and oil leakage. AGENCY LISTINGS
Tested to UL 778 and CSA 22.2 108 Standards By Canadian Standards Association File #LR38549
US
80 70
WS
10 GPM
20
BH
5 FT
0 60 15
WS
15
BH
50 W S10 40
WS0
BHF
10
0 0 10
7BH
WS0
5BHF
WS03
BHF
0 0 0
0
40 10
60
80 0
100
10
140
160
180 40
00
0 50
0 FLOW RATE
IT T
MOtOr aND MODeL INFOrMatION
ORDeR nUMBeR
WS0311BHF WS0318BHF WS0312BHF WS0511BHF WS0518BHF WS0512BHF WS0538BHF WS0532BHF WS0534BHF WS0537BHF WS0718BHF WS0712BHF WS0738BHF WS0732BHF WS0734BHF WS0737BHF WS1018BHF WS1012BHF WS1038BHF WS1032BHF WS1034BHF WS1037BHF WS1512BHF WS1538BHF WS1532BHF WS1534BHF WS1537BHF WS2012BHF WS2038BHF WS2032BHF WS2034BHF WS2037BHF
GOuLDs PuMPs
Wastewater
HP
0.33 0.33 0.33 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.75 0.75 0.75 0.75 0.75 0.75 1 1 1 1 1 1 1.5 1.5 1.5 1.5 1.5 2 2 2 2 2
PHASe vOLTS
1 1 1 1 1 1 3 3 3 3 1 1 3 3 3 3 1 1 3 3 3 3 1 3 3 3 3 1 3 3 3 3 115 208 230 115 208 230 200 230 460 575 208 230 200 230 460 575 208 230 200 230 460 575 230 200 230 460 575 230 200 230 460 575
RPM
MAx. AMPS
12.4 6.8 6.2 14.5 8.4 7.6 4.9 3.6 1.8 1.5 11.0 10.0 6.2 5.4 2.7 2.2 14.5 13.0 8.6 7.5 3.8 3.1 18.0 10.0 9.6 4.8 3.9 18.0 12.0 11.6 5.8 4.7
kvA CODe
M K M M K M R R R R K J L K K L K J M L L L J K K K L F K K K L
ReSISTAnCe START
7.5 9.7 9.6 7.5 9.7 9.6 9.7 12.2 9.3 10.3 2.76 3.2
LIne-LIne
1.0 2.4 4.0 1.0 2.4 4.0 3.8 5.8 23.2 35.3 2.4 2.7 5.7 8.6 34.2 26.5 1.1 2.1 2.7 4.1 16.2 26.5 0.53 1.7 1.7 6.6 10.5 1.1 1.7 1.7 6.6 10.5
3.19
3.44
3500
3.75
4.00
4.44
DIMeNsIONs
(All dimensions are in inches. Do not use for construction purposes.)
814"
1 618" 7 8"
Discharge Flange: 2" NPT standard 3" NPT optional (order an A1-3)
KICK-BACK
IT T
PerFOrMaNCe ratINGs (gallons per minute)
Order no. HP RPM 10 15 20 25 30 35 40 45 50 55 60 65 70 75 WS03BHF WS05BHF WS07BHF WS10BHF WS15BHF WS20BHF 1 1 3 3 2 4 1 112 2 3500 3500 3500 3500 3500 3500 86 110 140 48 88 120 158 62 98 139 186 217 32 74 120 170 204 49 101 150 190 21 82 130 175 60 110 159 38 88 140 67 120 47 100 29 80 62 43 23
Wastewater
COMPONeNts
Item no. 1 2 3 4 5 6 7 8 Description Impeller Casing Mechanical Seal Motor Shaft Motor Ball Bearings Power Cable Casing O-Ring
7 5 6 4 3
8 1 2
Goulds Pumps and the ITT Engineered Blocks Symbol are registered trademarks and tradenames of ITT Industries Inc.
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.