Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Additional Information: Type of Equipment: Manufacturer: P.O. No.: Location: Unit No.: Reference Document: Subcontractor inspected initials/date 1.0 Compare nameplate information with equipment record. Note any deviations under remarks 2.0 2.1 2.2 2.3 Establish and record the following: Equipment/circuit identification Area classification Type of Ex-protection/gas group/ temperature class 2.4 2.5 2.6 3.0 Type of enclosure protection Electrical protection setting/rating Actual maximum load/ammeter reading Check the following items and report any deviations/defects under remarks: 3.1 3.2 3.3 3.4 Labelling correct No unauthorized modifications Enclosures and glasses satisfactory Seals and gaskets satisfactory
Attachments, No. of pages:
Items to inspect
Remarks
H - Companys presence is mandatory for all activities in section. h - Companys presence is mandatory.
*Company only initials for holdpoint
Date:
Date:
C:\RB_Forms\RB26E09.DOT\
www.red-bag.com
Additional Information: Type of Equipment: Manufacturer: P.O. No.: Location: Unit No.: Reference Document: Subcontractor inspected initials/date 3.5 3.6 3.7 3.8 Bolts and glands complete and tight No undue accumulation of dust and dirt No leakage of oil/compound No damage to above ground part of connected cables 3.9 Adequate protection of equipment and cables against corrosion. the weather, vibrations and other adverse factors 3.10 Motor fans and couplings not rubbing on cowls/guards 3.11 Earthing in good condition 3.12 Oil levels in sight glasses correct 3.13 Padlock facilities correct 3.14 Silicagel in breathers satisfactory 4.0 Remedial action completed Hold Point Company inspected* initials/date Remarks Registration No.: System Voltage: Size/Rating:
Items to inspect
H - Companys presence is mandatory for all activities in section. h - Companys presence is mandatory.
*Company only initials for holdpoint
Date:
Date:
C:\RB_Forms\RB26E09.DOT\
www.red-bag.com