Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Page 1 of 13
Objects created
l
Clip angles (1 or 2) Seat stiffeners (optional) Web stiffeners (optional) Bolts Welds Cuts
Use for
Situation Description Beam seat with stiffeners.
Beam seat top and bottom with stiffeners. Various bolting options.
file:///C:/Users/HUU-MANH/AppData/Local/Temp/~hh4B43.htm
13/03/2012
Page 2 of 13
Selection order
file:///C:/Users/HUU-MANH/AppData/Local/Temp/~hh4B43.htm
13/03/2012
Page 3 of 13
1. Pick the supporting column (main part). 2. Pick the supported beam (secondary part) to create the connection automatically.
Mark Part 3 4 5 6 Clip angles Seat stiffener Web stiffeners Bottom seat plate
file:///C:/Users/HUU-MANH/AppData/Local/Temp/~hh4B43.htm
13/03/2012
Page 4 of 13
Picture
Use Picture tab to control the clearances between angles and the main and secondary parts in the Angle profile box (170) connection.
Dimensions
Gap between angle profile and primary. Gap between angle profile and secondary. Distance of the secondary beam web stiffener from the face of the primary column.
Zero Zero
This information is relevant only to the imperial environment. GENERAL defaults can be found in the joints.def file in the system folder and can be modified as required.
Parts
Use Parts tab to control the stiffeners, clip angle or bottom plate in the Angle profile box (170) connection.
file:///C:/Users/HUU-MANH/AppData/Local/Temp/~hh4B43.htm
13/03/2012
Page 5 of 13
Bottom plate
Enter values for thickness and width when a seat plate is required instead of a seat angle.
Profile
Enter the desired seat angle profile. Default angle profile is L150*100*10 or L4X4X3/8. Default value in the joints.def file is GENERAL / lsize.
Seat position
Controls the position of the seat(s) in the connection. Option Description Top Creates a seat at the top of the secondary part. Bottom Creates a seat at the bottom of the secondary part. Both Creates two seats: one at the top and another at the bottom of the secondary part.
file:///C:/Users/HUU-MANH/AppData/Local/Temp/~hh4B43.htm
13/03/2012
Page 6 of 13
Connects the longer leg of the angle profile to the part where bolts reach further from the angle corner.
file:///C:/Users/HUU-MANH/AppData/Local/Temp/~hh4B43.htm
13/03/2012
Page 7 of 13
Bolted Angle profile is bolted to both the main and the secondary part (default). Welded-bolted Angle profile is welded to the main part and bolted to the secondary part. Bolted-welded Angle profile is bolted to the main part and welded to the secondary part. Welded Angle profile is welded to both the main and the secondary part.
amfer si e
Option Description 1 2 The horizontal dimension of stiffener plate line chamfer. The vertical dimension of the stiffener plate line chamfer.
Default Equal to angle profile rounding value Equal to angle profile rounding value
Option Description 1 2 The horizontal position of the angle profile defined as the distance between the center lines of the main part and the angle profile.
Default Zero
The horizontal position of the middle stiffener plate defined as the distance between Zero the center lines of the main part and the stiffener plate. If more than one middle stiffener is created, the distance is measured from the center line of the main part to the center point of the middle stiffener group.
otc ing
file:///C:/Users/HUU-MANH/AppData/Local/Temp/~hh4B43.htm
13/03/2012
Page 8 of 13
When the connection is made to the primary part web, the secondary beam can be fitted to the web and notched by the primary part flanges. Option Description Fitted and Notched Secondary is fitted and notched. Fitted Secondary is fitted, but not notched. Notched Secondary is notched, but not fitted. None Secondary is not fitted or notched.
Stiffener type
Option Description Rectangle Creates a rectangular stiffener plate. Triangle Creates a triangular stiffener plate with a side length equal to the inner edge length of the shorter leg of the angle profile. Shaped The stiffener plate shape is determined by a line connecting the ends of the angle profile legs.
amfer type
Option Description None Line Rounding
file:///C:/Users/HUU-MANH/AppData/Local/Temp/~hh4B43.htm
13/03/2012
Page 9 of 13
Arc
amfer si e
Field Description A B Horizontal dimension of stiffener plate line chamfer. Vertical dimension of stiffener plate line chamfer. Vertical dimension for stiffener plate shape cut line. D Horizontal dimension for stiffener plate shape cut line.
file:///C:/Users/HUU-MANH/AppData/Local/Temp/~hh4B43.htm
13/03/2012
Page 10 of 13
Middle The stiffener plate is positioned in the middle of the angle profile. The number of middle stiffeners can be controlled with the field Number of middle stiffeners. Multiple stiffeners are created centered and equally spaced. According to bolts The stiffener plate is placed between the bolts in the middle of the bolt spacing. By default, a stiffener is created between every two bolts. The number of stiffeners used can be decreased using the field Number of middle stiffeners.
Stiffeners
Use Stiffeners tab to control the properties of near side and far side stiffeners created in the secondary part web in the Angle profile box (170) connection.
Stiffener S / Stiffener FS
Near side and far side stiffener size and basic properties are:
file:///C:/Users/HUU-MANH/AppData/Local/Temp/~hh4B43.htm
13/03/2012
Page 11 of 13
Field t b h
Default Equal to clip angle thickness. Determined by primary part flange distance.
Pos_No Part position number and Assembly position number. Material Stiffener plate material grade. Name Stiffener plate name.
Default part start number is defined in the Options dialog box. Material grade defined in the Options dialog box. Default part name is defined in the message file.
Stiffeners
Creates or removes stiffeners. Option Description Automatic Not available in all components. No stiffeners No stiffeners are created. Stiffeners Stiffeners are always created.
amfer si e
Option 1 2
Description The horizontal dimension of the stiffener line chamfer or radius of arc type chamfer. The vertical dimension of the stiffener line chamfer.
Chamfer type The shape of the chamfer created in the corner of the stiffeners: No, Line, Cope, Arc.
SBoltsDown
file:///C:/Users/HUU-MANH/AppData/Local/Temp/~hh4B43.htm 13/03/2012
Page 12 of 13
Use SBoltsDown tab to control the properties of the bolts connecting the bottom seat angle to a secondary part in the Angle profile box (170) connection.
Field Description Horizontal bolt group position from the end of the secondary beam. Bolt edge distance. Number of bolts. Bolt spacing. Use a space to separate bolt spacing values. Enter a value for each space between bolts. For example, if there are 3 bolts, enter 2 values. Vertical bolt group position. Reference point is from the bottom of the secondary beam. Deletes bolts from the bolt group. Enter the bolt numbers of the bolts to delete, separated by a space. Bolt numbers run left to right and top down.
Bolt standard
Tolerance
file:///C:/Users/HUU-MANH/AppData/Local/Temp/~hh4B43.htm
13/03/2012
Page 13 of 13
Thread in mat
Defines whether or not the thread may be within the bolted parts when using bolts with a shaft. This has no effect when using full-threaded bolts.
Yes
Site
Slotted oles
You can define slotted, oversized, or tapped holes with the following options.
Field 1 2
Description Slotted hole X dimension or allowance for oversized holes. Slotted hole Y dimension.
Default
0, which results in a round hole. 0, which results in a round hole.
Hole type Slotted creates slotted holes. Oversized creates oversized or tapped holes. Rotate Slots Slots in When the hole type is Slotted, this option rotates the slotted holes. Member(s) in which slotted holes are created. The options depend on the component.
Staggering of bolts
Option Description Not staggered Staggered type 1 Staggered type 2 Staggered type 3 Staggered type 4
file:///C:/Users/HUU-MANH/AppData/Local/Temp/~hh4B43.htm
13/03/2012