Sei sulla pagina 1di 16

ROCKEY Smart Card Reader Manual

Beijing Feitian Technologies Co., Ltd. www.FTsafe.com

Thank you for your purchase of the ROCKEY Card Reader from Feitian Technologies Co., Ltd. ROCKEY is ideal for portable card reader solutions.

Chapter One
How to Install the Software for the ROCKEY Card Reader Note: Install the ROCKEY software before attaching the reader to the PC. 1. Terminate all applications. 2. Put the ROCKEY CD into your CD-ROM Drive. Select [Run] command from the Windows Start menu. Enter the command [D:\Win32\driver\instdrv.exe](Where D is the letter of your CD-ROM Drive). Then press the [Enter] button. Now you should choose your setup language. See 2

figure 1.1 below:

Figure 1.1 Choose setup language 3. Then click OK. figure 1.2: The installation wizard will start. See

Figure 1.2 Driver installation window 4. Click Next to begin the installation. The following window will appear after successful installation. See figure 1.3: 4

Figure 1.3 Installation finished 5. Sometimes you will need to restart your computer to activate the driver (In Windows 2000/XP you do not need to restart your computer. In Windows 98/Me you must restart your computer). Then click Finish to quit the 5

installation. Note: For Windows 98/Me attach the ROCKEY card reader to the PC only after the PC has fully restarted.

Chapter Two
How to Install ROCKEY Card Reader After you have installed the driver for ROCKEY Card Reader, you may attach the ROCKEY Card Reader to your computer. 1. Attach the ROCKEY Card Reader to the USB port of your computer. 2. Make sure the ROCKEY Card Reader is properly connected to the PC. The LED should be lit brightly to indicate a successful connection.

Chapter Three
How to Use the Test Program for ROCKEY Card Reader Feitian provides a PC/SC tool. The tool allows you to send instructions directly to the Reader, and obtain responses to those instructions. Run SCSample.exe under the directory of Win32\Example on the CD-ROM. The Select reader window will appear. See figure 3.1:

Figure 3.1 Select reader Choose FT SCR2000 0 from the pull down list. Then click the OK button to enter the main window of the test tool. See figure 3.2.

Figure 3.2 PC/SC test tool main window 9

Note: All the smart card operation information will be displayed in the Output box. Click Card Connect button before you perform any operations on the smart card. If the connection is successful, you may press the Card Disconnect button and Transmit button. If the connection fails, read the information in Output box to find out the reason. After a successful connection, the transport protocol supported by the smart card will be displayed in the Output box. (i.e. T=0 and T=1) See figure 3.3:

10

Figure 3.3 Connection with smart card succeeded You may send instructions to smart card now. Write your instructions in the Command box (such as 0084000008) and then click the Transmit button to send your instructions to smart card. 11

The operation results will be displayed in the Output box. Please refer to your smart card reference materials to find out the meaning of the response. Figure 3.4 displays return result 4a0c7a25171595019000 for instruction 0084000008.

12

Figure 3.4 Send instruction and return result Click Card Disconnect button to break the connection with the smart card. See figure 3.5. Then click Cancel button to exit.

Figure 3.5 Disconnect the connection 13

Chapter Four
What if ROCKEY Card Reader does not respond? 1. If you find the LED is off or blinking, please: Check whether the USB port functions correctly. Check whether the driver is properly installed. 2. Check whether you can find the card reader in your Windows Device Manager. If not: Uninstall the driver and reboot. Reinstall the driver and reboot. Test the reader once again. 3. Please contact our technical supporting engineers.

14

ROCKEY Card Reader Technical Specifications: Technical Specifications Operation Temperature Read Times Card Frequency Card Current Interface Power Communication Protocol Standard Interface Rate Supported Systems Operating 0 -- +70C 100,000 times 3MHz 0 50 mA PC, USB port Provided by USB port T=0 T=1 ISO7816-3, PC/SC, GSM 11.11 T=0: 9600 baud (bps) T=1: 9600 115200 baud (bps) Windows 98SE/Me/2000/XP/Server 2003, Linux, Mac OS 10 above

15

ROCKEY Card Reader Specifications: Model Weight LED Dimensions Extension Cable ROCKEY200 60 g One bicolor LED 70 x 48 x 12mm 1m USB extension cable ROCKEY 100 10 g One bicolor LED 64 x 22 x 9mm None

Address: 3Fl., No.5 Building, Jimen Hotel, Xueyuan Road, Haidian District, Beijing, 100088, P. R. China Phone: +86-10-62360800 62360900 Fax: +86-10-82070027 Website: www.FTsafe.com

16

Potrebbero piacerti anche