Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
REMOTE
Connector type Connector type 50-pin (Amphenol 57JE 50-pin (Amphenol 57 JE series the equivalent) series ororthe equivalent)
25 50 1 26
DISA
DOORPHONE
After inserting the connector, fasten the connector with the nylon tie.
Installation
2-23
EXTN. 9-16
8EXTN 1 T R D1 Jack D2 No.9 P1 P2 T R D1 Jack No.10 D2 P1 P2 T R D1 Jack No.11 D2 P1 P2 T R D1 Jack No.12 D2 P1 P2 T R D1 Jack No.13 D2 P1 P2 T R D1 Jack No.14 D2 P1 P2 T R D1 Jack No.15 D2 P1 P2 T R D1 Jack No.16 D2 P1 P2
Jack No.2
Jack No.18
Jack No.26
Jack No.3
Jack No.19
Jack No.27
Jack No.4
Jack No.20
Jack No.28
Jack No.5
Jack No.21
Jack No.29
Jack No.6
Jack No.22
Jack No.30
Jack No.7
Jack No.23
Jack No.31
Jack No.8
Jack No.24
Jack No.32
Notes
1 8EXTN in the table indicates an extension expansion area for KXTD816. However, pins P1 and P2 are not available, because KXTD816 cannot perform OHCA by KX-T7130. See Section 3. Features, Off-Hook Call Announcement (OHCA).
2-24
Installation
Connection of Proprietary Telephones, Single Line Telephones and DSS Consoles for KX-TD816
Connection of an Analog Proprietary Telephone, KX-T7020, KX-T7030, KX-T7033, KX-T7050, KX-T7055 or KX-T7130 4-conductor wiring is required for each extension. Connect pins T, R, D1 and D2. T: Tip D1: Data 1 R: Ring D2: Data 2 Connection of a Digital Proprietary Telephone, KX-T7220, KX-T7230, KX-T7235, or KX-T7250 4-conductor wiring is required for each extension. Connect pins D1 and D2 only. (T and R are only needed if Section 2.3.4 Paralleled Telephone Connection, Method 2 is used for parallel or XDP connection of a DPT and a single line telephone.) Connection of a Single Line Telephone, KX-T7051 or KX-T7052 2-conductor wiring is required for each extension. Connect pins T and R. Connection of a DSS Console, KX-T7040 or KX-T7240 4-conductor wiring is required for each extension. Connect pins D1 and D2 only. (T and R are not necessary.)
Installation
2-25
Connection of Proprietary Telephones, Single Line Telephones and DSS Consoles for KX-TD1232
Connection of the Proprietary Telephone, KX-T7130 6-conductor wiring is required for each extension. Connect pins T, R, D1, D2, P1 and P2. T: Tip D1: Data 1 P1: 3 Pair Voice (OHCA) R: Ring D2: Data 2 P2: 3 Pair Voice (OHCA) Connection of a Digital Proprietary Telephone, KX-T7220, KX-T7230, KX-T7235, or KX-T7250 4-conductor wiring is required for each extension. Connect pins D1 and D2 only. (T and R are only needed if Section 2.3.4 Paralleled Telephone Connection, Method 2 is used for parallel or XDP connection of a DPT and a single line telephone.) Connection of an Analog Proprietary Telephone, KX-T7020, KX-T7030, KX-T7033, KX-T7050 or KX-T7055 4-conductor wiring is required for each extension. Connect pins T, R, D1 and D2. Connection of a Single Line Telephone, KX-T7051 or KX-T7052 2-conductor wiring is required for each extension. Connect pins T and R. Connection of a DSS Console, KX-T7040 or KX-T7240 4-conductor wiring is required for each extension. Connect pins D1 and D2 only. (T and R are not necessary.) Station Wiring (3-pair twisted cabling):
50-Pin Connector 26 1 27 2 28 3 1 2 3 4 5 6
Line cord
Bridging Clips
2-26
Installation
Programming References
Section 4, System Programming, [007] DSS Console Port and Paired Telephone Assignment [109] Expansion Unit Type
Feature References
Note
After completing all the required inside cabling, including CO lines, extensions, external pagers and external music sources, fasten the cables with the nylon tie (included) as shown.
Installation
2-27
Pin no.
20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21
40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21
13 12 11
10 9 8 7 6 5 4 3 2 1
DISA
IN
DOORPHONE
OUT
IN
OUT
IN
OUT
There are five kinds of dot for lines. You can distinguish a line by the number of dot and the color.
1: 2:
Cable (50 lines)
3: 4: C: C: continuous
2-28
Installation
Installation
2-29