Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Installation CD
step 1 Installation of Xtenda Bus Enumerator. step 2 Installation of Graphic Controller for Port 1 of PCI card. step 3 Installation of Graphic Controller for Port 2 of PCI card. step 4 Installation of Graphic Controller for Port 3 of PCI card.
Type the serial number and the activation key for every Xtenda Multi Box.
Please use the Direct LAN cable*. Please do not connect to any network devices.
* The Direct LAN cable is that the order of line color at both sides of the connector is the same. the order of line color at both sides of connector is the same.
Speaker
- A speaker with bulid-in booster is recommeded.
Keyboard
After finishing installing the Xtenda hardware, flip to back for installing the Xtenda software.
The peripheral device must be connected to the PCI Card and the Multi Box in order to use the Xtenda product before installing the driver and management console. Both hardware and software must be installed to use the Xtenda product.
2 Click on the Install Program button. 3 Input the administrator password twice to prevent the unauthorized access to the Xtenda Management Console.
2 Insert the Installation CD into the CD-ROM drive and click the "Install X300 PCI Card Driver" button in the pop-up menu. 3 Click "Finish" to finish the installation of the X300 PCI Card driver.
4 Input the serial number and the activation key written on the back of the Multi Box.
5 Select "Yes, I want to restart my computer now." and click on the "Restart" button to complete the installation.
2 Wait for the installation of the Xtenda Graphic Controller to be completed. 3 The screen of the host PC will flicker for a short time. Click the "Finish" button in the prompted window to complete the installation of the graphic controller driver.
Resolution 1024 x 768 / 16 bit colors / Refresh rate 60 Hz Resolution 800 x 600 / 16 bit colors / Refresh rate 75 Hz
Two X300 PCI Cards - CPU : Intel Pentium4 2.4 ~ 3.8GHz with HT* - Main Memory : 1.0 Gbytes or more
This material may vary depending on the specification of the products and may change without prior notice. Each port of Xtenda PCI Card have to be installed separately. Therefore you have to install the Xtender Graphic Controller three times in order to use all ports of the PCI Card.
Targa is a registered trademark of Targa Hong Kong Limited in Hong Kong and/or other countries. OfficeStation is the property of NComputing, Inc. and maybe registered in Korea and other countries. Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in United States and/or other countries. All other brands and product names are trademarks of their respective owners. Usage of software may require the authorization of respective software companies. Please refer to the End User License Agreement.