Sei sulla pagina 1di 4

36 Series - Miniature PCB relays 10 A Features

Printed circuit mount 10 A relay New smaller size 1 Pole changeover contacts or 1 Pole normally open contact Miniature - Sugar cube package DC coil - 360 mW Wash tight: RT III Cadmium Free contact material RoHS conform

36.11-4001

36.11-4301

1 CO (SPDT), 10 A Sugar cube size PCB mount

1 NO (SPST-NO), 10 A Sugar cube size PCB mount

Copper side view Contact specification Contact configuration Rated current/Maximum peak current Rated load AC1 Rated load AC15 (230 V AC) Single phase motor rating (230 V AC) Breaking capacity DC1: 30/110/220 V Minimum switching load Standard contact material Coil specification Nominal voltage (UN) Rated power AC/DC Operating range Holding voltage Must drop-out voltage Technical data Mechanical life AC/DC Electrical life at rated load AC1 Operate/release time cycles cycles ms /10 106 100 10 9/3 4 1,000 40+85 RT III
3

Copper side view

1 CO (SPDT) A VA VA kW A 10/15 250/250 2,500 500 0.37 10/0.3/0.12 500 (5/100) AgSnO2 V AC (50/60 Hz) V DC VA (50 Hz)/W AC DC AC/DC AC/DC 3 - 5 - 6 - 9 - 12 - 24 - 48 /0.36 (0.751.5)UN /0.4 UN /0.1 UN

1 NO (SPST-NO) 10/15 250/250 2,500 500 0.37 10/0.3/0.12 500 (5/100) AgSnO2 3 - 5 - 6 - 9 - 12 - 24 - 48 /0.36 (0.751.5)UN /0.4 UN /0.1 UN /10 106 100 103 9/2 4 1,000 40+85 RT III

Rated voltage/Maximum switching voltage V AC

mW (V/mA)

Insulation between coil and contacts (1.2/50 s) kV Dielectric strength between open contacts V AC Ambient temperature range Environmental protection Approvals (according to type) C

36 Series - Miniature PCB relays 10 A


Ordering information
Example: 36 series miniature PCB relay, 1 CO (SPDT) - 10 A contacts, 12 V DC coil. A B C D

3 6. 1
Series Type 1 = PCB mount No. of poles 1 = 1 pole, 10 A Coil version 9 = DC Coil voltage See coil specifications

1 . 9 . 0 1 2 . 4
A: Contact material 4 = AgSnO2 B: Contact circuit 0 = CO (SPDT) 3 = NO (SPST)

1
D: Special versions 1 = Wash tight (RT III) C: Options 0 = None

Selecting features and options: only combinations in the same row are possible. Preferred selections for best availability are shown in bold.
Type 36.11 Coil version DC A 4 B 0-3 C 0 D 1

Technical data
Insulation according to EN 61810-1 Nominal voltage of supply system Rated insulation voltage Pollution degree Insulation between coil and contact set Type of insulation Overvoltage category Rated impulse voltage Dielectric strength Insulation between open contacts Type of disconnection Dielectric strength Other data Bounce time: NO/NC Vibration resistance (555)Hz: NO/NC Shock resistance Power lost to the environment without contact current with rated current Recommended distance between relays mounted on PCB ms g g W W mm 1/6 (changeover) 15/15 (changeover) 16 0.4 1.4 5 1/ (normally open) 15/ (normally open) V AC/kV (1.2/50 s) Micro-disconnection 1,000/1.5 kV (1.2/50 s) V AC Basic II 2.5 2,500 V AC V AC 230/400 250 2

36 Series - Miniature PCB relays 10 A


Contact specification
F 36 - Electrical life (AC) v contact current H 36 - Maximum DC1 breaking capacity

Resistive load - cos = 1 Inductive load - cos = 0.4

DC breaking current (A)

Cycles

DC voltage (V)

When switching a resistive load (DC1) having voltage and current values under the curve, an electrical life of 100103 can be expected. In the case of DC13 loads, the connection of a diode in parallel with the load will permit a similar electrical life as for a DC1 load. Note: the release time for the load will be increased.

Coil specifications
DC coil data Nominal voltage UN V 3 5 6 9 12 24 48 Coil code Operating range Umin V 2.2 3.7 4.5 6.7 9 18 36 Umax V 4.5 7.5 9 13.5 18 36 72 Resistance Rated coil consumption R I at UN mA 25 120 70 72 100 60 225 40 400 30 1,600 15 6,400 7.5 1 - Max. permitted coil voltage. 2 - Min. pick-up voltage with coil at ambient temperature. R 36 - DC coil operating range v ambient temperature

9.003 9.005 9.006 9.009 9.012 9.024 9.048

Potrebbero piacerti anche