Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
MAXIMUM RATINGS
Rating Collector-Emitter Voltage Collector-Base Voltage Emitter-Base Voltage PN2222 PN2222A PN2222 PN2222A PN2222 PN2222A Symbol VCEO VCBO VEBO IC PD 625 5.0 PD 1.5 12 TJ, Tstg 55 to +150 W mW/C C mW mW/C
1 2
2 BASE 1 EMITTER
Collector Current Continuous Total Device Dissipation @ TA = 25C Derate above 25C Total Device Dissipation @ TC = 25C Derate above 25C Operating and Storage Junction Temperature Range
MARKING DIAGRAM
Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected.
PN 222x YWW
THERMAL CHARACTERISTICS
Characteristic Thermal Resistance, Junction-to-Ambient Thermal Resistance, Junction-to-Case Symbol RqJA RqJC Max 200 83.3 Unit C/W C/W PN222 x Y WW = Device Code = 2 or A = Year = Work Week
ORDERING INFORMATION
See detailed ordering and shipping information in the package dimensions section on page 2 of this data sheet.
Preferred devices are recommended choices for future use and best overall value.
*For additional information on our PbFree strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.
Semiconductor Components Industries, LLC, 2005
PN2222, PN2222A
ORDERING INFORMATION
Device PN2222 PN2222A PN2222AG PN2222ARLRA PN2222ARLRAG PN2222ARLRM PN2222ARLRP Package TO92 TO92 TO92 (PbFree) TO92 TO92 (PbFree) TO92 TO92 Shipping 5000 Units / Box 5000 Units / Box 5000 Units / Box 2000 Tape & Reel 2000 Tape & Reel 2000 / Ammo Pack 2000 / Ammo Pack
For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D.
PN2222A only
PN2222 PN2222A
http://onsemi.com
2
PN2222, PN2222A
ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted) (Continued)
Characteristic SMALLSIGNAL CHARACTERISTICS Current Gain Bandwidth Product (Note 2) (IC = 20 mAdc, VCE = 20 Vdc, f = 100 MHz) Output Capacitance (VCB = 10 Vdc, IE = 0, f = 1.0 MHz) Input Capacitance (VEB = 0.5 Vdc, IC = 0, f = 1.0 MHz) Input Impedance (IC = 1.0 mAdc, VCE = 10 Vdc, f = 1.0 kHz) (IC = 10 mAdc, VCE = 10 Vdc, f = 1.0 kHz) Voltage Feedback Ratio (IC = 1.0 mAdc, VCE = 10 Vdc, f = 1.0 kHz) (IC = 10 mAdc, VCE = 10 Vdc, f = 1.0 kHz) SmallSignal Current Gain (IC = 1.0 mAdc, VCE = 10 Vdc, f = 1.0 kHz) (IC = 10 mAdc, VCE = 10 Vdc, f = 1.0 kHz) Output Admittance (IC = 1.0 mAdc, VCE = 10 Vdc, f = 1.0 kHz) (IC = 10 mAdc, VCE = 10 Vdc, f = 1.0 kHz) Collector Base Time Constant (IE = 20 mAdc, VCB = 20 Vdc, f = 31.8 MHz) Noise Figure (IC = 100 mAdc, VCE = 10 Vdc, RS = 1.0 kW, f = 1.0 kHz) SWITCHING CHARACTERISTICS (PN2222A only) Delay Time Rise Time Storage Time Fall Time (VCC = 30 Vdc, VBE(off) = 0.5 Vdc, 0.5 IC = 150 mAdc, IB1 = 15 mAdc) (Figure 1) (VCC = 30 Vdc, IC = 150 mAdc, IB1 = IB2 = 15 mAdc) (Figure 2) td tr ts tf 10 25 225 60 ns ns ns ns PN2222 PN2222A hie PN2222A PN2222A hre PN2222A PN2222A hfe PN2222A PN2222A hoe PN2222A PN2222A rbCc PN2222A NF PN2222A 4.0 dB 5.0 25 35 200 150 ps 50 75 300 375 mmhos 8.0 4.0 2.0 0.25 8.0 1.25 X 10 4 fT PN2222 PN2222A Cobo Cibo 30 25 kW 250 300 8.0 pF pF MHz Symbol Min Max Unit
CS* < 10 pF
4 V Scope rise time < 4 ns *Total shunt capacitance of test jig, connectors, and oscilloscope.
http://onsemi.com
3
PN2222, PN2222A
1000 700 500 hFE , DC CURRENT GAIN 300 200 25C 100 70 50 30 20 10 0.1 0.2 0.3 0.5 0.7 1.0 2.0 3.0 55C VCE = 1.0 V VCE = 10 V 5.0 7.0 10 20 30 IC, COLLECTOR CURRENT (mA) 50 70 100 200 300 500 700 1.0 k
TJ = 125C
0.6
10 mA
150 mA
500 mA
0.4
0.2 0 0.005
0.01
0.02 0.03
0.05
0.1
0.2
2.0
3.0
5.0
10
20
30
50
200 100 70 50 t, TIME (ns) 30 20 10 7.0 5.0 3.0 2.0 5.0 7.0 10 200 300 20 30 50 70 100 IC, COLLECTOR CURRENT (mA) 500 IC/IB = 10 TJ = 25C tr @ VCC = 30 V td @ VEB(off) = 2.0 V td @ VEB(off) = 0
500 300 200 100 70 50 30 20 10 7.0 5.0 ts = ts 1/8 tf VCC = 30 V IC/IB = 10 IB1 = IB2 TJ = 25C
t, TIME (ns)
tf
5.0 7.0 10
300
500
http://onsemi.com
4
PN2222, PN2222A
10 8.0 IC = 1.0 mA, RS = 150 W 500 mA, RS = 200 W 100 mA, RS = 2.0 kW 50 mA, RS = 4.0 kW RS = OPTIMUM RS = SOURCE RS = RESISTANCE 10 f = 1.0 kHz 8.0 NF, NOISE FIGURE (dB) IC = 50 mA 100 mA 500 mA 1.0 mA
6.0
6.0
4.0
4.0
2.0 0 50
5.0 10
20
50 100
100 200
5.0 k 10 k 20 k
50 k 100 k
f, FREQUENCY (kHz)
300 200
100 70 50 1.0 2.0 3.0 5.0 7.0 10 20 30 IC, COLLECTOR CURRENT (mA) 50 70 100
0.2 0.3
0.5 0.7 1.0 2.0 3.0 5.0 7.0 10 REVERSE VOLTAGE (VOLTS)
20 30
50
Figure 9. Capacitances
1.0 TJ = 25C 0.8 VBE(sat) @ IC/IB = 10 0.6 VBE(on) @ VCE = 10 V 0.4 COEFFICIENT (mV/ C) V, VOLTAGE (VOLTS) 1.0 V
+0.5 0 0.5 1.0 1.5 2.0 VCE(sat) @ IC/IB = 10 2.5 RqVB for VBE RqVC for VCE(sat)
0.2 0
0.1 0.2
50 100 200 0.5 1.0 2.0 5.0 10 20 IC, COLLECTOR CURRENT (mA)
500 1.0 k
0.1 0.2
0.5
500
http://onsemi.com
5
PN2222, PN2222A
PACKAGE DIMENSIONS
TO92 TO226AA CASE 2911 ISSUE AL
A R P L
SEATING PLANE
NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. INCHES MIN MAX 0.175 0.205 0.170 0.210 0.125 0.165 0.016 0.021 0.045 0.055 0.095 0.105 0.015 0.020 0.500 0.250 0.080 0.105 0.100 0.115 0.135 MILLIMETERS MIN MAX 4.45 5.20 4.32 5.33 3.18 4.19 0.407 0.533 1.15 1.39 2.42 2.66 0.39 0.50 12.70 6.35 2.04 2.66 2.54 2.93 3.43
X X G H V
1
D J C SECTION XX N N
DIM A B C D G H J K L N P R V
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Typical parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customers technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
http://onsemi.com
6
PN2222/D
This datasheet has been download from: www.datasheetcatalog.com Datasheets for electronics components.