Sei sulla pagina 1di 6

Inderpreet singh

Email inderpreetmadhok@gmail.com Contact: 9986695738

Current address: Inderpreet singh Door No.-351 2nd Cross, Gokhulam-3rd Stage, Mysore-570017 Karnataka.

Permanent address: Inderpreet singh House-No-212 New Model Town, Ludhiana-141002 Punjab

Objective

To progress step by step in life by gaining domain knowledge of various fields and achieving technical experience and excellence by optimum use of my abilities and incorporation of values.
Summary

Working as a Stress Analysis Engineer in the Product Life Cycle Engineering Solutions (PLES) department of Infosys Limited, Mysore for the past 22 months in different projects for clients like Cummins and Alstom. Currently working in Ansys Classic, Workbench and Ncode Structural Analysis of Nacelle components for Alstom (Wind Turbine). 3 months training in CATIA V5, Abaqus, Solidworks and Hypermesh in Infosys Limited, Mysore.

Certifications

Infosys Quality Foundation Certification Introduction to Engineering Design Introduction to Aircraft Structures Finite Element Analysis

Professional Experience Education

Infosys Limited, Mysore 21st Jan, 2010 Course Specialization Institution B. Tech Ansys Higher secondary Ncode Secondary School

Till Date

Engineer Completion

% / CGPA

Mechanical Chitkara University 2010 72.8 Pre and Engineering Post Processing of Wind Turbine Structural Components Chandigarh

Science Gurunanak International Public 2006 CalculationSchool of Damage and Life of Structural Components Stream Ludhiana Generic Stream Gurunanak International Public School Ludhiana 2004

67.8

80.8

Last Changed on: 20th May 2011 Page 1 of 6

Inderpreet singh

Email inderpreetmadhok@gmail.com Contact: 9986695738

Work Experience Details

Infosys Education and Research Training. We were trained in Programming softwares like C++, Database System We also had to execute a project in a group as part of the Programming and Testing module.

Description of training

Role Duration Software/Hardware CGPA for Training

Trainee Jan-2010 to Feb-2010 (1 month) SQL server 4.2 /5 Engineering Services training. We underwent training on different relevant subjects like Mechanical Engineering Basics, Product Design concepts, Aircraft design, Aircraft Structures, Mechanics of Materials, Steam and Gas Turbines and Finite Element Analysis. Along with this we were also trained on CATIA V5, Hypermesh, Solidworks, Ansys, Abaqus and The tool training comprised of both theory and hands-on. We also had to execute a Project in a group as part of FEA knowledge.

Description of training

Role Duration Software/Hardware CGPA

Trainee March-2010 to May-2010 (3 months) Abaqus and Ansys 4.8/5.0

Last Changed on: 20th May 2011 Page 2 of 6

Inderpreet singh

Email inderpreetmadhok@gmail.com Contact: 9986695738

Project Name Client

ALSWIND Alstom Performed FE analysis to investigate the stress results and Displacements of Structural Components of Alstoms Wind turbines. The main aim was to check whether the stresses are within the permissible limits and further Calculate Safety factor to meet the entire design criterion. Calculation of damage and Fatigue Safety Factor to study the Fatigue Behaviour of Wind Turbine Components

Description of Project

Role

Engineer Study of inputs. Pre-processing Finite element modeling of the various Nacelle components, Creating connections and meshing the model with second order elements in Ansys Workbench. Applying Aerodynamic loads and boundary conditions to the model. Post-processing Linear and Non-Linear analysis were carried out to know the stresses at all the critical regions of the Wind Turbine Ansys, Ncode, Solidworks, order to validate whether they are within the Nacelle Components in MS permissible limits. Fatigue analysis is carried out to Fatigue nature of DOS, Windows 95/98/2000/NT/7 the component. 2-DPreparingModeling, Assembly design. were sent to the customer in and 3-D technical report The results the form of a Certification report describing the suggested changes Preand improvements to Condition, Load, Mesh) and Post Processing Processing (Boundary stress and damage regions to support the (Job and Analysis) design department. Keeping trackof International standards i.e. ISO, Ecotenica Basic knowledge of defect logs for the entire team and carrying out defect analysis on a quarterly basis. CMMNSMI Cummins July-2010 to March-2011(8 months) Performed FE analysis to investigate the stress results and Ansys 11.0,Ncode,Solidworks 2006 Displacements of Engine Lift Bracket. The main aim was to check whether the stresses are within the permissible limits to meet the entire design criterion.

Tools Responsibility Operating Systems Solidworks 2006 Ansys11.0 Standards Project Name Client Duration Description of Software/Hardware Project

Role

Analysis Engineer Study of inputs. Pre-processing Finite element modeling of the Engine components, Creating Connections and meshing the model with second order elements in Ansys Workbench.. Applying Gravity loads and boundary conditions to the model. Post-processing Dynamic analysis was carried out to Know the stresses at all the critical regions of the Component in order to validate whether they are within the permissible limits. Preparing technical report The results were sent to the customer in the form of a report describing the suggested changes and improvements to stress regions to support the design department. .
Last Changed on: 20th May 2011 Page 3 of 6

Responsibility

Duration Software/Hardware

April-20011 (1 month) Ansys

Inderpreet singh

Email inderpreetmadhok@gmail.com Contact: 9986695738

Project Name Client

ALWINDMI Alstom Load Extraction of Central- Front Bolted Joint, Rear- Frame Bolted Joint of Alstoms Wind turbines. The main aim was to check whether the stresses are within the permissible limits and further Calculate safety factor for the bolts to meet the entire design criterion. Calculation of damage and Fatigue Safety Factor to study the Fatigue Behavior of Bolts,

Technology Skill Set Performed FE analysis to investigate the stress results and Working

Description of Project

Role

Engineer. Study of inputs. Pre-processing Finite element modeling of the various Nacelle components, Creating Connections and meshing the model with second order elements in Ansys Workbench.. Applying Aerodynamic loads and boundary conditions to the model. Post-processing Dynamic analysis was carried out to know the stresses at all the critical regions of the nacelle Components in order to validate whether they are within the permissible limits. Fatigue analysis is carried out to Fatigue nature of the component. Preparing technical report The results were sent to the customer in the form of a report describing the suggested changes and improvements to stress and damage regions to support the design department. Keeping track of defect logs for the entire team and carrying out defect analysis on a quarterly basis. May-2011 to Till Date (7 months) Ansys 11.0, EcoFat, Solidworks 2006

Responsibility

Duration Software/Hardware

Analysis tools Operating Systems Solidworks 2006 Ansys 11.0 Standards

Ansys, Abaqus 6.9 MS DOS, Windows 95/98/2000/NT/7, UNIX 2-D and 3-D Modeling, Surfacing, Drafting and Assembly design. Pre Processing (Part, Assembly, Load, Mesh) and Post Processing (Job and Analysis) Basic knowledge of International standards i.e. ISO, Ecotenica.

Last Changed on: 20th May 2011 Page 4 of 6

Inderpreet singh

Email inderpreetmadhok@gmail.com Contact: 9986695738

Managerial Skill Set

I have attended sessions organized by the Infosys Leadership Institute (ILI) including:

Speak up and articulation skills Written communication skills Business and telephone etiquette Presentation skills Effective meetings Personal effectiveness Group discussions

Received the Infosys Spot award for Best Project Execution.


Accolades

Had KSS sessions with fellow team members on technical related aspects. Six months major Project was awarded second position in University. Prize winning performances for three years in Essay Writing, Quiz and Declamation competitions at school and parish levels.

Personal Details

Gender Date of Birth Marital Status Languages Known


Key strengths

Male 30th June,1988 Unmarried English, Hindi, Punjabi

Declaration: I hereby declare that the above written particulars are true to the best of my

Ready to work hard under mentally tough conditions. Possess leadership instincts and ability to handle unexpected situations with ease. Good communications skills and well disciplined.

knowledge and belief.

Last Changed on: 20th May 2011 Page 5 of 6

Inderpreet singh

Email inderpreetmadhok@gmail.com Contact: 9986695738

Date: 11-11-2011 Place: Mysore (Inderpreet)

References:-

1) Harsha Govinhalli Ravindra,


Engineering Lead, Infosys Limited, Mysore. Harsha_gr@infosys.com

2) Gururaj Nayak, Senior Project Manager, Infosys Limited, Mysore. Gururaj_Nayak@infosys.com

Last Changed on: 20th May 2011 Page 6 of 6

Potrebbero piacerti anche