Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
D D D
3-State Outputs Drive Bus Lines or Buffer Memory Address Registers PNP Inputs Reduce DC Loading Hysteresis at Inputs Improves Noise Margins
SN54LS, SN54S . . . J OR W PACKAGE SN74LS240, SN74LS244 . . . DB, DW, N, OR NS PACKAGE SN74LS241 . . . DW, N, OR NS PACKAGE SN74S . . . DW OR N PACKAGE (TOP VIEW)
description
These octal buffers and line drivers are designed specifically to improve both the performance and density of three-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters. The designer has a choice of selected combinations of inverting and noninverting outputs, symmetrical, active-low output-control (G) inputs, and complementary output-control (G and G) inputs. These devices feature high fan-out, improved fan-in, and 400-mV noise margin. The SN74LS and SN74S devices can be used to drive terminated lines down to 133 .
1 2 3 4 5 6 7 8 9 10
20 19 18 17 16 15 14 13 12 11
VCC 2G/2G 1Y1 2A4 1Y2 2A3 1Y3 2A2 1Y4 2A1
4 5 6 7 8
3 2 1 20 19 18 17 16 15 14 9 10 11 12 13
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright 2002, Texas Instruments Incorporated
On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters.
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.
SN54LS240, SN54LS241, SN54LS244, SN54S240, SN54S241, SN54S244 SN74LS240, SN74LS241, SN74LS244, SN74S240, SN74S241, SN74S244 OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS
SDLS144B APRIL 1985 REVISED FEBRUARY 2002
ORDERING INFORMATION
TA PACKAGE ORDERABLE PART NUMBER SN74LS240N SN74LS241N PDIP N Tube SN74LS244N SN74S240N SN74S241N SN74S244N Tube Tape and reel Tube Tape and reel Tube 0C to 70C SOIC DW Tape and reel Tube Tape and reel Tube Tape and reel Tube Tape and reel SOP NS Tube SN74LS240DW SN74LS240DWR SN74LS241DW SN74LS241DWR SN74LS244DW SN74LS244DWR SN74S240DW SN74S240DWR SN74S241DW SN74S241DWR SN74S244DW SN74S244DWR SN74LS240NSR SN74LS241NSR SN74LS244NSR SSOP DB Tape and reel SN74LS240DBR SN74LS244DBR TOP-SIDE MARKING SN74LS240N SN74LS241N SN74LS244N SN74S240N SN74S241N SN74S244N LS240 LS241 LS244 S240 S241 S244 74LS240 74LS241 74LS244 LS240
LS244 Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package.
SN54LS240, SN54LS241, SN54LS244, SN54S240, SN54S241, SN54S244 SN74LS240, SN74LS241, SN74LS244, SN74S240, SN74S241, SN74S244 OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS
SDLS144B APRIL 1985 REVISED FEBRUARY 2002
SNJ54S244FK SNJ54S244FK Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package.
SN54LS240, SN54LS241, SN54LS244, SN54S240, SN54S241, SN54S244 SN74LS240, SN74LS241, SN74LS244, SN74S240, SN74S241, SN74S244 OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS
SDLS144B APRIL 1985 REVISED FEBRUARY 2002
Input Input
Output
GND
SN54LS240, SN54LS241, SN54LS244, SN54S240, SN54S241, SN54S244 SN74LS240, SN74LS241, SN74LS244, SN74S240, SN74S241, SN74S244 OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS
SDLS144B APRIL 1985 REVISED FEBRUARY 2002
logic diagram
LS240, S240 1G 1 1G 2 18 1Y1 1A1 4 16 1Y2 1A2 6 14 1Y3 1A3 8 12 1Y4 1A4 19 2G 9 1 LS241, S241
1A1
18
1Y1
1A2
16
1Y2
1A3
14
1Y3
1A4
8 19
12
1Y4
2G
2A1
11
2Y1
2A1
11
2Y1
2A2
13
2Y2
2A2
13
2Y2
2A3
15
2Y3
2A3
15
2Y3
2A4
17
2A4
17
2Y4
1G
1A1
18
1Y1
1A2
16
1Y2
1A3
14
1Y3
1A4
12
1Y4
2G
19
2A1
11
2Y1
2A2
13
2Y2
2A3
15
2Y3
2A4
17
2Y4
Pin numbers shown are for DB, DW, J, N, NS, and W packages.
SN54LS240, SN54LS241, SN54LS244, SN54S240, SN54S241, SN54S244 SN74LS240, SN74LS241, SN74LS244, SN74S240, SN74S241, SN74S244 OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS
SDLS144B APRIL 1985 REVISED FEBRUARY 2002
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage, VCC (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V Input voltage, VI: LS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 V Off-state output voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 V Package thermal impedance, JA (see Note 2): DB package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70C/W DW package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58C/W N package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69C/W NS package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60C/W Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65C to 150C
Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. Voltage values are with respect to network ground terminal. 2. The package thermal impedance is calculated in accordance with JESD 51-7.
SN54LS240, SN54LS241, SN54LS244, SN54S240, SN54S241, SN54S244 SN74LS240, SN74LS241, SN74LS244, SN74S240, SN74S241, SN74S244 OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS
SDLS144B APRIL 1985 REVISED FEBRUARY 2002
electrical characteristics over recommended operating free-air temperature range (unless otherwise noted)
PARAMETER VIK Hysteresis (VT+ VT) VCC = MIN, VCC = MIN VCC = MIN, IOH = 3 mA VCC = MIN, IOH = MAX VCC = MIN, , VIL = MAX VCC = MAX, VIL = MAX VCC = MAX, VIL = MAX VCC = MAX, VCC = MAX, VCC = MAX, VCC = MAX, VIH = 2 V, VIH = 2 V, VIH = 2 V, , VIL = MAX, VIL = 0.5 V, IOL = 12 mA IOL = 24 mA VO = 2.7 V VO = 0.4 V TEST CONDITIONS II = 18 mA 0.2 2.4 2 0.4 0.4 3.4 MIN SN54LS TYP MAX 1.5 0.2 2.4 2 0.4 0.5 20 20 0.1 20 0.2 40 Outputs high ICC VCC = MAX, MAX Out ut o en Output open Outputs low Out uts Outputs disabled All LS240 LS241, LS244 LS240 17 26 27 29 225 27 44 46 50 40 17 26 27 29 20 20 0.1 20 0.2 225 27 44 46 50 54 mA V A A mA A mA mA 0.4 3.4 V MIN SN74LS TYP MAX 1.5 UNIT V V
VOH
LS241, LS244 32 54 32 For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions. All typical values are at VCC = 5 V, TA = 25C. Not more than one output should be shorted at a time, and duration of the short-circuit should not exceed one second.
SN54LS240, SN54LS241, SN54LS244, SN54S240, SN54S241, SN54S244 SN74LS240, SN74LS241, SN74LS244, SN74S240, SN74S241, SN74S244 OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS
SDLS144B APRIL 1985 REVISED FEBRUARY 2002
External resistance between any input and VCC or ground 40 40 k TA Operating free-air temperature (see Note 3) 55 125 0 70 C NOTES: 1. Voltage values are with respect to network ground terminal. 3. An SN54S241J operating at free-air temperature above 116C requires a heat sink that provides a thermal resistance from case to free air, RCA, of not more that 40C/W.
electrical characteristics over recommended operating free-air temperature range (unless otherwise noted)
PARAMETER VIK Hysteresis (VT+ VT) VCC = MIN, VCC = MIN VCC = MIN IOH = 1 mA VOH VCC = MIN, IOH = 3 mA VCC = MIN, IOH = MAX VOL IOZH IOZL II IIH IIL IOS VCC = MIN, IOL = MAX VCC = MAX, VIL = 0.8 V VCC = MAX, VIL = 0.8 V VCC = MAX, VCC = MAX, VCC = MAX MAX, VCC = MAX Outputs high ICC VCC = MAX, , Output open Outputs low Out uts Outputs disabled S240 S241,S244 S240 S241, S244 S240 VIH = 2 V, VIH = 2 V, VIH = 2 V, VIH = 2 V, VIH = 2 V, VIH = 2 V, VI = 5.5 V VI = 2.7 V VI = 0 5 V 0.5 Any A Any G 50 80 95 100 120 100 VIL = 0.8 V, VIL = 0.8 V, VIL = 0.5 V, VIL = 0.8 V, 2.4 2 0.55 50 50 1 50 400 2 225 123 147 145 170 145 50 80 95 100 120 100 3.4 TEST CONDITIONS II = 18 mA 0.2 0.4 SN54S MIN TYP MAX 1.2 0.2 2.7 2.4 2 0.55 50 50 1 50 400 2 225 135 160 150 180 150 180 mA V A A mA A A mA mA 3.4 V 0.4 SN74S MIN TYP MAX 1.2 UNIT V V
VO = 2.4 V VO = 0.5 V
S241, S244 120 170 120 For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions. All typical values are at VCC = 5 V, TA = 25C. Not more than one output should be shorted at a time, and duration of the short-circuit should not exceed one second.
SN54LS240, SN54LS241, SN54LS244, SN54S240, SN54S241, SN54S244 SN74LS240, SN74LS241, SN74LS244, SN74S240, SN74S241, SN74S244 OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS
SDLS144B APRIL 1985 REVISED FEBRUARY 2002
SN54LS240, SN54LS241, SN54LS244, SN54S240, SN54S241, SN54S244 SN74LS240, SN74LS241, SN74LS244, SN74S240, SN74S241, SN74S244 OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS
SDLS144B APRIL 1985 REVISED FEBRUARY 2002
LOAD CIRCUIT FOR OPEN-COLLECTOR OUTPUTS Timing Input tsu 1.3 V Data Input 1.3 V
LOAD CIRCUIT FOR 3-STATE OUTPUTS 3V 1.3 V 0V th 3V 1.3 V 0V VOLTAGE WAVEFORMS SETUP AND HOLD TIMES
1.3 V tw
1.3 V
Low-Level Pulse
1.3 V
VOLTAGE WAVEFORMS PULSE DURATIONS Output Control (low-level enabling) tPZL Waveform 1 (see Notes C and D) tPZH VOH 1.3 V 1.3 V VOL VOLTAGE WAVEFORMS PROPAGATION DELAY TIMES Waveform 2 (see Notes C and D)
3V 1.3 V 1.3 V 0V tPLZ 1.5 V VOL tPHZ VOH 1.3 V VOH 0.3 V 1.5 V VOL + 0.3 V
3V Input 1.3 V 1.3 V 0V tPLH In-Phase Output (see Note D) tPHL Out-of-Phase Output (see Note D) 1.3 V tPHL VOH 1.3 V VOL tPLH
1.3 V
NOTES: A. CL includes probe and jig capacitance. B. All diodes are 1N3064 or equivalent. C. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control. D. S1 and S2 are closed for tPLH, tPHL, tPHZ, and tPLZ; S1 is open and S2 is closed for tPZH; S1 is closed and S2 is open for tPZL. E. Phase relationships between inputs and outputs have been chosen arbitrarily for these examples. F. All input pulses are supplied by generators having the following characteristics: PRR 1 MHz, ZO 50 , tr 15 ns, tf 6 ns. G. The outputs are measured one at a time with one input transition per measurement.
10
SN54LS240, SN54LS241, SN54LS244, SN54S240, SN54S241, SN54S244 SN74LS240, SN74LS241, SN74LS244, SN74S240, SN74S241, SN74S244 OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS
SDLS144B APRIL 1985 REVISED FEBRUARY 2002
LOAD CIRCUIT FOR OPEN-COLLECTOR OUTPUTS Timing Input tsu 1.5 V Data Input 1.5 V
LOAD CIRCUIT FOR 3-STATE OUTPUTS 3V 1.5 V 0V th 3V 1.5 V 0V VOLTAGE WAVEFORMS SETUP AND HOLD TIMES
1.5 V tw
1.5 V
Low-Level Pulse
1.5 V
VOLTAGE WAVEFORMS PULSE DURATIONS Output Control (low-level enabling) tPZL Waveform 1 (see Notes C and D) tPZH VOH 1.5 V 1.5 V VOL VOLTAGE WAVEFORMS PROPAGATION DELAY TIMES Waveform 2 (see Notes C and D)
3V 1.5 V 1.5 V 0V tPLZ 1.5 V VOL tPHZ VOH 1.5 V VOH 0.5 V 1.5 V VOL + 0.5 V
3V Input 1.5 V 1.5 V 0V tPLH In-Phase Output (see Note D) tPHL Out-of-Phase Output (see Note D) 1.5 V tPHL VOH 1.5 V VOL tPLH
1.5 V
NOTES: A. CL includes probe and jig capacitance. B. All diodes are 1N3064 or equivalent. C. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control. D. S1 and S2 are closed for tPLH, tPHL, tPHZ, and tPLZ; S1 is open and S2 is closed for tPZH; S1 is closed and S2 is open for tPZL. E. All input pulses are supplied by generators having the following characteristics: PRR 1 MHz, ZO 50 ; tr and tf 7 ns for Series 54/74 devices and tr and tf 2.5 ns for Series 54S/74S devices. F. The outputs are measured one at a time with one input transition per measurement.
11
SN54LS240, SN54LS241, SN54LS244, SN54S240, SN54S241, SN54S244 SN74LS240, SN74LS241, SN74LS244, SN74S240, SN74S241, SN74S244 OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS
SDLS144B APRIL 1985 REVISED FEBRUARY 2002
APPLICATION INFORMATION
12
28-Feb-2005
PACKAGING INFORMATION
Orderable Device 5962-7801201VRA 5962-7801201VSA 7705701RA 7705701SA 78012012A 7801201RA 7801201SA JM38510/32401B2A JM38510/32401BRA JM38510/32401BSA JM38510/32402B2A JM38510/32402BRA JM38510/32402BSA JM38510/32403B2A JM38510/32403BRA JM38510/32403BSA JM38510/32403SRA JM38510/32403SSA SN54LS240J SN54LS241J SN54LS244J SN54S240J SN54S241J SN54S244J SN74LS240DW SN74LS240DWR SN74LS240J SN74LS240N SN74LS240N3 SN74LS240NSR SN74LS241DW SN74LS241DWR SN74LS241J SN74LS241N SN74LS241N3 SN74LS241NSR Status (1) ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE OBSOLETE ACTIVE OBSOLETE ACTIVE ACTIVE ACTIVE OBSOLETE ACTIVE OBSOLETE ACTIVE Package Type CDIP CFP CDIP CFP LCCC CDIP CFP LCCC CDIP CFP LCCC CDIP CFP LCCC CDIP CFP CDIP CFP CDIP CDIP CDIP CDIP CDIP CDIP SOIC SOIC CDIP PDIP PDIP SO SOIC SOIC CDIP PDIP PDIP SO Package Drawing J W J W FK J W FK J W FK J W FK J W J W J J J J J J DW DW J N N NS DW DW J N N NS Pins Package Eco Plan (2) Qty 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 2000 20 2000 25 2000 20 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 25 2000 None None None None None None None None None None None None None None None None None None None None None None None None Pb-Free (RoHS) Pb-Free (RoHS) None Pb-Free (RoHS) None Pb-Free (RoHS) Pb-Free (RoHS) Pb-Free (RoHS) None Pb-Free (RoHS) None Pb-Free (RoHS) Lead/Ball Finish Call TI Call TI Call TI Call TI Call TI Call TI Call TI Call TI Call TI Call TI Call TI Call TI Call TI Call TI Call TI Call TI Call TI Call TI Call TI Call TI Call TI Call TI Call TI Call TI CU NIPDAU CU NIPDAU Call TI CU NIPDAU Call TI CU NIPDAU CU NIPDAU CU NIPDAU Call TI CU NIPDAU Call TI CU NIPDAU MSL Peak Temp (3) Level-NC-NC-NC Level-NC-NC-NC Level-NC-NC-NC Level-NC-NC-NC Level-NC-NC-NC Level-NC-NC-NC Level-NC-NC-NC Level-NC-NC-NC Level-NC-NC-NC Level-NC-NC-NC Level-NC-NC-NC Level-NC-NC-NC Level-NC-NC-NC Level-NC-NC-NC Level-NC-NC-NC Level-NC-NC-NC Level-NC-NC-NC Level-NC-NC-NC Level-NC-NC-NC Level-NC-NC-NC Level-NC-NC-NC Level-NC-NC-NC Level-NC-NC-NC Level-NC-NC-NC Level-2-250C-1 YEAR/ Level-1-235C-UNLIM Level-2-250C-1 YEAR/ Level-1-235C-UNLIM Call TI Level-NC-NC-NC Call TI Level-2-260C-1 YEAR/ Level-1-235C-UNLIM Level-2-250C-1 YEAR/ Level-1-235C-UNLIM Level-2-250C-1 YEAR/ Level-1-235C-UNLIM Call TI Level-NC-NC-NC Call TI Level-2-260C-1 YEAR/ Level-1-235C-UNLIM
Addendum-Page 1
28-Feb-2005
Orderable Device SN74LS244DBR SN74LS244DW SN74LS244DWR SN74LS244J SN74LS244N SN74LS244N3 SN74LS244NSR SN74S240DW SN74S240DWR SN74S240N SN74S240N3 SN74S241DW SN74S241DWR SN74S241J SN74S241N SN74S241N3 SN74S244DW SN74S244DWR SN74S244J SN74S244N SN74S244N3 SNJ54LS240FK SNJ54LS240J SNJ54LS240W SNJ54LS241FK SNJ54LS241J SNJ54LS241W SNJ54LS244FK SNJ54LS244J SNJ54LS244W SNJ54S240FK SNJ54S240J SNJ54S240W SNJ54S241FK
Status (1) ACTIVE ACTIVE ACTIVE OBSOLETE ACTIVE OBSOLETE ACTIVE ACTIVE ACTIVE ACTIVE OBSOLETE ACTIVE ACTIVE OBSOLETE ACTIVE OBSOLETE ACTIVE ACTIVE OBSOLETE ACTIVE OBSOLETE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE
Package Type SSOP SOIC SOIC CDIP PDIP PDIP SO SOIC SOIC PDIP PDIP SOIC SOIC CDIP PDIP PDIP SOIC SOIC CDIP PDIP PDIP LCCC CDIP CFP LCCC CDIP CFP LCCC CDIP CFP LCCC CDIP CFP LCCC
Package Drawing DB DW DW J N N NS DW DW N N DW DW J N N DW DW J N N FK J W FK J W FK J W FK J W FK
Pins Package Eco Plan (2) Qty 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 1 1 1 1 1 1 1 1 1 1 1 1 1 20 25 2000 20 25 2000 2000 25 2000 20 20 2000 25 2000 Pb-Free (RoHS) Pb-Free (RoHS) Pb-Free (RoHS) None Pb-Free (RoHS) None Pb-Free (RoHS) Pb-Free (RoHS) Pb-Free (RoHS) Pb-Free (RoHS) None Pb-Free (RoHS) Pb-Free (RoHS) None Pb-Free (RoHS) None Pb-Free (RoHS) Pb-Free (RoHS) None Pb-Free (RoHS) None None None None None None None None None None None None None None
Lead/Ball Finish CU NIPDAU CU NIPDAU CU NIPDAU Call TI CU NIPDAU Call TI CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU Call TI CU NIPDAU CU NIPDAU Call TI CU NIPDAU Call TI CU NIPDAU CU NIPDAU Call TI CU NIPDAU Call TI Call TI Call TI Call TI Call TI Call TI Call TI Call TI Call TI Call TI Call TI Call TI Call TI Call TI
MSL Peak Temp (3) Level-2-260C-1 YEAR/ Level-1-235C-UNLIM Level-2-250C-1 YEAR/ Level-1-235C-UNLIM Level-2-250C-1 YEAR/ Level-1-235C-UNLIM Call TI Level-NC-NC-NC Call TI Level-2-260C-1 YEAR/ Level-1-235C-UNLIM Level-2-250C-1 YEAR/ Level-1-235C-UNLIM Level-2-250C-1 YEAR/ Level-1-235C-UNLIM Level-NC-NC-NC Call TI Level-2-250C-1 YEAR/ Level-1-235C-UNLIM Level-2-250C-1 YEAR/ Level-1-235C-UNLIM Call TI Level-NC-NC-NC Call TI Level-2-250C-1 YEAR/ Level-1-235C-UNLIM Level-2-250C-1 YEAR/ Level-1-235C-UNLIM Call TI Level-NC-NC-NC Call TI Level-NC-NC-NC Level-NC-NC-NC Level-NC-NC-NC Level-NC-NC-NC Level-NC-NC-NC Level-NC-NC-NC Level-NC-NC-NC Level-NC-NC-NC Level-NC-NC-NC Level-NC-NC-NC Level-NC-NC-NC Level-NC-NC-NC Level-NC-NC-NC
Addendum-Page 2
28-Feb-2005
Package Drawing J W FK J W
Pins Package Eco Plan (2) Qty 20 20 20 20 20 1 1 1 1 1 None None None None None
The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - May not be currently available - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. None: Not yet available Lead (Pb-Free). Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Green (RoHS & no Sb/Br): TI defines "Green" to mean "Pb-Free" and in addition, uses package materials that do not contain halogens, including bromine (Br) or antimony (Sb) above 0.1% of total product weight.
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDECindustry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 3
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TIs terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TIs standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Amplifiers Data Converters DSP Interface Logic Power Mgmt Microcontrollers amplifier.ti.com dataconverter.ti.com dsp.ti.com interface.ti.com logic.ti.com power.ti.com microcontroller.ti.com Applications Audio Automotive Broadband Digital Control Military Optical Networking Security Telephony Video & Imaging Wireless Mailing Address: Texas Instruments Post Office Box 655303 Dallas, Texas 75265 Copyright 2005, Texas Instruments Incorporated www.ti.com/audio www.ti.com/automotive www.ti.com/broadband www.ti.com/digitalcontrol www.ti.com/military www.ti.com/opticalnetwork www.ti.com/security www.ti.com/telephony www.ti.com/video www.ti.com/wireless