Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
MJE1123
PNP LOW DROPOUT TRANSISTOR 4.0 AMPERES 40 VOLTS
THERMAL CHARACTERISTICS
Thermal Resistance Junction to Case Thermal Resistance Junction to Ambient Maximum Lead Temperature for Soldering Purposes: 1/8 from Case for 5 seconds RJC RJA TL 1.67 70 275 C/W C CASE 221A06 TO220AB
MJE1123
ELECTRICAL CHARACTERISTICS continued (TC = 25C Unless Otherwise Noted)
Characteristic ON CHARACTERISTICS* (continued) BaseEmitter Saturation Voltage (IC = 1.0 Adc, IB = 20 mAdc) (IC = 2.0 Adc, IB = 50 mAdc) (IC = 4.0 Adc, IB = 120 mAdc) DC Current Gain (IC = 1.0 Adc, VCE = 7.0 Vdc) (IC = 1.0 Adc, VCE = 10 Vdc) (IC = 2.0 Adc, VCE = 7.0 Vdc) (IC = 2.0 Adc, VCE = 10 Vdc) (IC = 4.0 Adc, VCE = 7.0 Vdc) (IC = 4.0 Adc, VCE = 10 Vdc) BaseEmitter On Voltage (IC = 1.0 Adc, VCE = 1.0 Vdc) (IC = 2.0 Adc, VCE = 1.0 Vdc) (IC = 4.0 Adc, VCE = 1.0 Vdc) DYNAMIC CHARACTERISTICS CurrentGain Bandwidth Product (IC = 1.0 Adc, VCE = 4.0 Vdc, f = 1.0 MHz) * Indicates Pulse Test: Pulse Width = 300 s max, Duty Cycle = 2%. 100 VCE(sat), COLLECTOREMITTER SATURATION VOLTAGE (VOLTS) VCE(sat), COLLECTOREMITTER SATURATION VOLTAGE (VOLTS) TJ = 25C 10 IB = 20 mA 50 mA 1 fT 5.0 11.5 MHz VBE(sat) hFE 100 100 75 80 45 45 VBE(on) 0.75 0.84 0.90 0.90 1.00 1.20 170 180 120 140 75 79 225 225 170 180 100 100 Vdc 0.77 0.87 1.00 0.95 1.20 1.40 Vdc Symbol Min Typ Max Unit
0.8
0.6
IC = 4 A, IB = 100 mA
100 mA 120 mA
0.1 0.1
10
1.1 IC = 4 A, IB = 100 mA 1
0.9 IC = 2 A, IB = 50 mA 0.8
10
Figure 4. BaseEmitter Saturation Voltage versus Temperature Motorola Bipolar Power Transistor Device Data
MJE1123
1000 TJ = 25C DC CURRENT GAIN GAIN CHANGE RELATIVE TO 25C (%) 40 VCE = 2, 7, or 10 V 30
10
100
10
100
600 5.6 V 10 F* 20
*REQUIRED IF DEVICE IS *MORE THAN 6 FROM MAIN *FILTER CAPACITOR. #REQUIRED FOR STABILITY #(LARGER VALUES INCREASE #STABILITY).
MJE1123
5V OUTPUT 10 F#
0.4
0.3
0.2
0.1
0.1
100
MJE1123
1 0.5 0.3 0.2 0.1 0.05 0.03 0.02 D = 0.02 D = 0.01 SINGLE PULSE 0.02 0.05 0.1 0.2 0.5 1 2 t, TIME (ms) D = 0.5 D = 0.2 D = 0.1 D = 0.05 t1 t2 DUTY CYCLE, D = t1/t2 5 10 20 50 P(pk) RJC(t) = r(t) RJC RJC = 1.67C/W MAX D CURVES APPLY FOR POWER PULSE TRAIN SHOWN READ TIME AT t1 TJ(pk) TC = P(pk) RJC(t) 100 200 500 1K
0.01 0.01
MJE1123
PACKAGE DIMENSIONS
T B
4
SEATING PLANE
F T S
NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. DIM A B C D F G H J K L N Q R S T U V Z INCHES MIN MAX 0.570 0.620 0.380 0.405 0.160 0.190 0.025 0.035 0.142 0.147 0.095 0.105 0.110 0.155 0.018 0.025 0.500 0.562 0.045 0.060 0.190 0.210 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 0.045 0.080 MILLIMETERS MIN MAX 14.48 15.75 9.66 10.28 4.07 4.82 0.64 0.88 3.61 3.73 2.42 2.66 2.80 3.93 0.46 0.64 12.70 14.27 1.15 1.52 4.83 5.33 2.54 3.04 2.04 2.79 1.15 1.39 5.97 6.47 0.00 1.27 1.15 2.04
Q
1 2 3
A U K
H Z L V G D N R J
STYLE 1: PIN 1. 2. 3. 4.
MJE1123
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different applications. All operating parameters, including Typicals must be validated for each customer application by customers technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer.
How to reach us: USA / EUROPE: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. 18004412447 MFAX: RMFAX0@email.sps.mot.com TOUCHTONE (602) 2446609 INTERNET: http://DesignNET.com
JAPAN: Nippon Motorola Ltd.; TatsumiSPDJLDC, Toshikatsu Otsuki, 6F SeibuButsuryuCenter, 3142 Tatsumi KotoKu, Tokyo 135, Japan. 0335218315 HONG KONG: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 85226629298
*MJE1123/D*
MJE1123/D