Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
DoubleStar Corp............................................................ 1 Upgrades..............................................................................6 Rifle Kits..............................................................................7 Barreled Uppers...............................................................21 Other Caliber Barreled Uppers.............................23 Barrels...................................................................................24 26 Other Caliber Barrels................................................. Barrel Parts........................................................................27 Charging Handles and Tactical latches.....28 Muzzle Brakes and Flash Hiders.........................29 Upper Receivers................................................................30 Rebuild Kits.......................................................................30 Upper Receiver Parts.....................................................31 Bolts and Bolt Carriers............................................32 Bolt Parts............................................................................32 Lower Receiver Parts...................................................33 34 Match Trigger Groups............................................... Trigger Groups................................................................35 Pistol Grips........................................................................36 Other MIAD Parts..........................................................37 Vertical Grips...................................................................37 Handguards......................................................................39 Rail Handguards............................................................39 Handguards Rails.........................................................42 Rail Panels..........................................................................42 Rear Sights.........................................................................43 Front Sights and Gas Blocks................................45 Buttstocks.........................................................................48 Buttstock Accessories...............................................51 AR-15 Accessories...........................................................52 Sling Adapters..................................................................52 CAR Endplate Sling Adapters.................................54 Bipods and Adapters....................................................55 55 Magazines............................................................................ Magazine Accessories..................................................57 Scope Mounts/Risers...................................................57 Scope Rings.........................................................................58 EOTech Holosights......................................................59 Aimpoint...............................................................................61 Tactical Slings.................................................................62 Tools.......................................................................................63 Brass Management.........................................................64 65 ACE Folding Mechanisms.......................................... ACE Modular Stocks and Stock Sets................66 ACE Receiver Blocks......................................................70 Other ACE Products....................................................71 AK Accessories..................................................................73 Miscellaneous Handguards...................................73 Flashlight Mounts.......................................................74 Surefire Weapon Lights & Accessories............75 77 Elzetta Lights & Accessories.................................. Buffer Technologies Recoil Buffers................77 78 Cleaning Kits & Accessories................................... M-79 Parts & Accessories...........................................79 M-60 Parts & Accessories............................................. 80 Tom Carpenter.................................................................. 82 F.A.Q.s....................................................................................... 83 J&T Customer Service Policies................................. 85
Handguard
Upper Options
Sight Options
Picatinny Rail Gas Block Forged front sight base (non bull barrel) PRI Flip Up Front Sight Gas Block (+$175)* GG&G Bolt On Tactical Modular Flip Up Sight Gas Block (+$165) YHM Flip Up Front Sight Gas Block (+$80) YHM Flip Up Front Sight Gas Block with Bottom Rail (+$125) DSC Low Profile Gas Block (+$32)* JP Gas Block Aluminum (+$60)* JP Gas Block Steel (+$70)* Troy Low Profile Gas Block (+$35)* YHM Quad Rail Gas Block (+$60)* YHM Two Rail Gas Block (+$57) DSC 2 rail gas blocks (+$55) DSC 4 rail gas blocks (+$55)
Standard A-2 or CAR Colt M-4 (+$40) CMP Free Float (+$140)* DSC DS-4 HG (+$20) DSC DS416 (+$130) DSC DS420 HG (+$175) DSC CAR Free-float HG (-$45) DSC Rifle Free-float NM HG (+$55) DD M4 7.0 HG (+265)* DD M4 9.0 HG (+$300)* DD M4 9.5FSP HG (+$315)* DD M4 12.0FSP HG (+$350)* DD M4 12.0 HG (+$335)* JP Modular HG System (+$170) KAC M-4 RAS (+$330) KAC M-4 RAS w/ UK SAS Lower Rail (+$460) KAC M-4 RAS (+$330) KAC M-4 RAS II (+$340) KAC M-5 RAS (+$365) KAC M-4 FF RAS (+$290)* KAC M-5 FF RAS (+$360)* KAC MRE RAS (+390)* PRI Gen 3 CAR Rail HG System (+$310) PRI Gen 3 Mid Length Rail HG System (+$315) PRI Gen 3 Rifle Rail HG System (+$320) Surefire M-73 Rail HG (+$190) Surefire M-82 Rail HG (+$205) Troy Industries MRF-C(+$170) Troy Industries MRF-MX(+$200) Troy Industries MRF-R(+$220) Troy Industries MRF-RS(+$225) YHM 2 Pc Rail CAR HG (+$135) YHM 2 Pc Rail Rifle HG (+$185) YHM FF 4 Rail Pistol HG (+90)* YHM FF 4 Rail CAR HG(+$110)* YHM FF 4 Rail Mid HG (+$120)* YHM FF 4 Rail Rifle HG(+$150)* Troy TRX Extreme 7 (+$145) Troy TRX Extreme 9 (+$155) Troy TRX Extreme 11 (+$175) Troy TRX Extreme 13 (+$180) Troy TRX Standard 7 (+$155) Troy TRX Standard 9 (+$165) Troy TRX Standard 11 (+$175) Troy TRX Standard 13 (+$190) YHM Diamond CAR (+$127) YHM Diamond Mid (+$135) YHM Diamond Specter (+$135) YHM Diamond Rifle (+$170) DD Omega 7 (+$260) DD Omega 9 (+$290) DD Omega 12 (+$330) Bolt Carrier Options/Upgrades Standard Chrome (+$70) Titanium Firing Pin (+$27) KNS Perma Pin (+$8) LMT Improved Bolt (+$140) LMT Enhanced Bolt Carrier Assy. (+$240) JP Tactical Carrier Assembly(+$190) No Carrier Assembly (-$75)
YHM Solid or LW 4 Rail Rifle HG (+$130) YHM Solid or LW 4 Rail CAR HG (+$100) DD M4 12.0 HG (+$315) DD M4 7.0 HG (+$245) JP Modular HG System (+$150)
KAC 2 Stage (+$305) Jewell 2 Stage (+$185) 2 Stage (+$105) JP Trigger Kit w/ Speed Hammer (+$165) Timney Drop-In Trigger Group (+$175) Timney Drop-In Skeletonized Trigger Group (+$235) Large hole fire control parts (+$45) No lower kit (-$30)
DSC Rail Gas Block Bull Barrel Low Profile Gas Block (+$20) Bull Barrel 4 Rail Gas Block (+$60) JP Gas Block (+$70) JP Gas Block, SS (+$80)
Standard A-2 DuckBill (+$16) Ergo Grip (+$18) Ergo Tactical Grip (+$50) Ergo Stow A Grip (+$15) Ergo Sure Grip (+$20) Hogue Grip (+20) Battle Grip (+$30) G-27 Grip (+$25) Magpul MIAD Grip (+$43) Magpul MOE Grip (+$18) Troy Battle Ax Grip (+$17) SPR Grip (+25)
A-1 or A-2 Phantom (+$25) A-2 Phantom (+$25) Reverse Flash Hider (+$20) 5 1/2 Flash Hider (+$20) Troy Medieval Brake or Flash Hider (+$40) Troy Claymore Muzzle Brake (+$60) KAC QD Compensator (+$85) PWS FSC Brake (+95) Carlson Comp (+$35) Carlson Tac Comp (+$40) Carlson Mini Comp (+$30) Carlson Strike Flash Hider (+$35) Carlson Adjustable Comp (+$55) DSC Dragon Flash Hider (+$40) DSC Cayman Flash Hider (+$40) DSC Violator Flash Hider (+$45) DSC Eliminator Flash Hider (+$40)
OD Green (A-2) (+$20) OD Green (DS-4) (+$20) Trigger Guard Options Standard Radiused Trigger Guard OD Green w/ Ergo Grip, DS-4 HG and DS-4 DSC Enhanced Trigger Guard buttstock (+$45) (+$15) Magpul Enhanced Trigger Guard Coyote Brown w/ Ergo Grip, DS-4 HG, and DS-4 (+$18) buttstock (+$50) Magpul MOE Enhanced Trigger Custom camouflage Guard (+$8) coating schemes starting Troy Industries Enhanced Trigger at just $200 Guard (+$22)
Bipod
Legend * = Not Available on barrels with perm. attached brake/flash hider. ** = only available in 16 and 24 models
Call us at 1-888-736-7725
Kits
416 Stainless Steel 16, 20, 22, 24 Bull N/A 1x8 or 1x10 Button RH Twist
Aluminum Knurled Free Float Tube
Upper:
Flattop or Hi-Rise(+$10)
Front Sights/Gas Blocks: Picatinny Rail Gas Block Rear Sight: Trigger Group: Pistol Grip: Buttstock Assembly: N/A Standard Semi-Auto Standard A-2 Standard A-2
Standard Semi-Auto $574.99 Bipod Stud (+$15), DSC Two Stage Trigger(+$100), Porting(+$50), Fluting(+$50)
Popular Upgrades:
16 CAR Kit
(LW Pictured)
Barrel Type: Barrel Profile: Flash Hider: Barrel Twist: Handguard: Bolt: Bolt Carrier: Price:
Upper: Front Sights/Gas Blocks: Rear Sight: Trigger Group: Pistol Grip: Buttstock Assembly:
A-2 or Flattop
Forged Front Sight Tower or Picatinny Rail Gas Block
Standard A-2(1/2x28tpi) 1x9 Button Rifled RH Twist Standard Heat Shielded CAR
Shot Peened, MP Batch Tested
Popular Upgrades:
Call us at 1-888-736-7725
Kits
Barrel Type:
Upper: Front Sights/Gas Blocks: Rear Sight: Trigger Group: Pistol Grip: Buttstock Assembly:
A-2 or Flattop
Standard Forged Sight Tower or Picatinny Rail Gas Block Standard A-2 or None (Flattop Model)
Barrel Profile: 16 Govt. M4 Profile Flash Hider: Barrel Twist: Handguard: Bolt: Bolt Carrier: Price: Popular Upgrades: Standard A-2(1/2x28tpi)
1x7 or 1x9 Button Rifled RH Twist
20 Rifle Kit
Barrel Type:
Upper: Front Sights/Gas Blocks: Rear Sight: Trigger Group: Pistol Grip: Buttstock Assembly:
A-2 or Flattop
Standard Forged Front Sight ower or Picatinny Rail Gas Block Standard A-2 or None (Flattop Model)
Barrel Profile: 20 Heavy Barrel Flash Hider: Barrel Twist: Handguard: Bolt: Bolt Carrier: Price: Popular Upgrades: Standard A-2(1/2x28tpi) 1x9 Button Rifled RH Twist Standard Heat Shielded A-2
Shot Peened, MP Batch Tested
Call us at 1-888-736-7725
Kits
Barrel Type:
Upper: Front Sights/Gas Blocks: Rear Sight: Trigger Group: Pistol Grip: Buttstock Assembly:
A-2 or Flattop
Forged Front Sight Tower or Picatinny Rail Gas Block
Barrel Profile: 16 Fluted Heavy Barrel Flash Hider: Barrel Twist: Handguard: Bolt: Bolt Carrier: Price: Popular Upgrades: Standard A-2 (1/2x28 tpi) 1x9 Button Rifled RH Twist Standard Heat Shield CAR
Shot Peened, MP Batch Tested
16 Expedition Kit
Barrel Type: Barrel Profile: Flash Hider: Barrel Twist: Handguard: Bolt: Bolt Carrier: Price:
Upper: Front Sights/Gas Blocks: Rear Sight: Trigger Group: Pistol Grip: Buttstock Assembly:
A-2 or Flattop
Front Sight Tower or Picatinny Rail Gas Block
None, Barrel is Ported 1x9 Button Rifled RH Twist Standard Heat Shielded CAR
Shot Peened, MP Batch Tested
Popular Upgrades:
Call us at 1-888-736-7725
Kits
Barrel Type: Barrel Profile: Flash Hider: Barrel Twist: Handguard: Bolt: Bolt Carrier: Price:
416 Stainless Steel 16 or 20 HBAR Air Guaged Standard A-2 (1/2x28 tpi) 1x8 Button Rifled RH Twist
Aluminum Knurled Free Float Tube
Upper: Front Sights/Gas Blocks: Rear Sight: Trigger Group: Pistol Grip: Buttstock Assembly:
$584.99
Magpul PRS Stock (+$240), ERGO Target Grip (+$45), Harris Bipod Stud (+$15), Badger Tactical Latch (+$20)
Popular Upgrades:
Barrel Type:
Upper: Front Sights/Gas Blocks: Rear Sight: Trigger Group: Pistol Grip: Buttstock Assembly:
Flattop
Standard Forged Front Sight Mount
Barrel Profile: 16 A-1 Lightweight Flash Hider: Barrel Twist: Handguard: Bolt: Bolt Carrier: Price: Popular Upgrades:
A-2 Phantom (1/2x28 tpi) 1x9 Button Rifled RH Twist DS416 4 Rail Handguard Shot Peened, MP Batch Tested Standard Semi Auto
DSC Flip Up Rear Sight Standard Semi Auto Hogue Pistol Grip
6 Position DS-4 Stock (Commercial)
$819.99
ACE Hammer Stock (+$225), ACE VGK-A Aluminum Vert Grip (+$35), Elzetta ZFH1506 (+$30)
Call us at 1-888-736-7725
10
Marksman Kit
Scope and rings not included
Kits
Upper:
Flattop
Barrel Profile: 20 Heavy Barrel Air Guaged Flash Hider: Barrel Twist: Handguard: Bolt: Bolt Carrier: Price: Popular Upgrades:
A-2 Phantom 1x8 Button Rifled RH Twist DD12.0 Rail Handguard Shot Peened, MP Batch Tested Standard Semi Auto
Front Sights/Gas Blocks: Picatinny Rail Gas Block Rear Sight: Trigger Group: Pistol Grip: Buttstock Assembly:
N/A Standard Semi Auto Magpul MIAD Grip Magpul PRS Stock
$1,314.99
Dissipator Kit
Barrel Type:
Upper: Front Sights/Gas Blocks: Rear Sight: Trigger Group: Pistol Grip: Buttstock Assembly:
A-2 or Flattop
Forged Front Sight Tower or Picatinny Rail Gas Block Standard A-2 or None (Flattop Model)
Barrel Profile: 16 HBAR Flash Hider: Barrel Twist: Handguard: Bolt: Bolt Carrier: Price: Popular Upgrades:
Standard A-2 (1/2x28 tpi) 1x9 Button Rifled RH Twist Standard Heat Shielded A-2 Shot Peened, MP Batch Tested Standard Semi Auto
$549.99
DS420 Handguard (+$175), DSC Eliminator Flash Hider (+$25), Ergo Sure Grip (+$20), ACE ARFX Stock (+$70)
Call us at 1-888-736-7725
11
Kits
Barrel Type: Barrel Profile: Flash Hider: Barrel Twist: Handguard: Bolt: Bolt Carrier: Price:
Upper: Front Sights/Gas Blocks: Rear Sight: Trigger Group: Pistol Grip: Buttstock Assembly:
A-2 or Flattop
Standard Forged Front Sight Tower
Standard A-2 or None (Flattop Model)
1x9 Button Rifled RH Twist Standard Heat Shielded CAR Shot Peened, MP Batch Tested Standard Semi Auto
$539.99
Magpul MOE Grip (+$15), ACE M4-7 HD Stock Assembly (+$55), Magpul MOE Handguard (+$50), Chromed Bolt Carrier Assembly (+$75)
Popular Upgrades:
Barrel Type:
Upper:
A-2 or Flattop
Barrel Profile: 14.5 DS4 Profile Barrel Flash Hider: Barrel Twist: Handguard: Bolt: Bolt Carrier: Price: Popular Upgrades:
Standard A-2
1x7 or 1x9 Button Rifled RH Twist Double Heat Shielded DS4
Front Sights/Gas Blocks: Front Sight Tower or Picatinny Rail Gas Block Rear Sight: Trigger Group: Pistol Grip: Buttstock Assembly:
Standard A-2 or None (Flattop Model)
$539.99
Detachable Carry Handle (+$65), 4150 CMV Barrel (+$25), Mil Spec Buttstock (+$15), DS416 Handguard (+$130)
Call us at 1-888-736-7725
12
Kits
Barrel Type: Barrel Profile: Flash Hider: Barrel Twist: Handguard: Bolt: Bolt Carrier: Price:
Upper: Front Sights/Gas Blocks: Rear Sight: Trigger Group: Pistol Grip: Buttstock Assembly:
A-2 or Flattop
Front Sight Tower or Picatinny Rail Gas Block
$539.99
Permanently Attached Phantom Flash Hider (+$75 makes it a non-SBR), Magpul MOE Grip (+15), DS416 Handguard (+$130), ACE Hammer Stock (+$225)
Popular Upgrades:
Shown with Detachable Carry Handle, DSC Enhanced Trigger Guard and a Hogue grip.
Barrel Type: Barrel Profile: Flash Hider: Barrel Twist: Handguard: Bolt: Bolt Carrier: Price:
4140 Chrome-moly Steel (Chrome Lining Available (+$50) 11.5 HBAR or Lightweight A-1 Profile
Upper: Front Sights/Gas Blocks: Rear Sight: Trigger Group: Pistol Grip: Buttstock Assembly:
A-2 or Flattop
Forged Front Sight Tower or Picatinny Rail Gas Block
$514.99
Detachable Carry Handle (+$65), Ergo Sure Grip (+$20), DSC Tac Comp (+$35), DSC Two Rail Gas Block (+$55)
Popular Upgrades:
Call us at 1-888-736-7725
13
Kits
Barrel Type: Barrel Profile: Flash Hider: Barrel Twist: Handguard: Bolt: Bolt Carrier: Price:
Upper: Front Sights/Gas Blocks: Rear Sight: Trigger Group: Pistol Grip: Buttstock Assembly:
A-2 or Flattop
Forged Front Sight Tower or Picatinny Rail Gas Block Standard A-2 or None (Flattop Model)
$514.99
Detachable Carry Handle (+$65), Strike Flash Hider (+$30), Chromed Bolt Carrier Assembly (+$75)
Popular Upgrades:
Barrel Type: Barrel Profile: Flash Hider: Barrel Twist: Handguard: Bolt: Bolt Carrier: Price:
Upper: Front Sights/Gas Blocks: Rear Sight: Trigger Group: Pistol Grip: Buttstock Assembly:
A-2 or Flattop
Front Sight Tower or Picatinny Rail gas Block
$514.99
Ambi, LH, or RH Single Point Sling Mt. Eggplate (+$12), Carlson Adjustable Muzzle Brake (+$55), Troy Battle Ax Grip (+$15), Badger Tac Latch (+$20)
Popular Upgrades:
Call us at 1-888-736-7725
14
Kits
Barrel Type: Barrel Profile: Flash Hider: Barrel Twist: Handguard: Bolt: Bolt Carrier: Price:
4140 Chrome-moly Steel (Chrome Lining Available (+$50) 11.5 or 10.5 HBAR or Lightweight A-1 Profile
Upper: Front Sights/Gas Blocks: Rear Sight: Trigger Group: Pistol Grip: Buttstock Assembly:
A-2 or Flattop
Forged Front Sight Tower or Picatinny Rail Gas Block
$514.99
ACE Pistol Tube Assembly (+$35), Hogue Grip (+$20), DSC Dragon Flash Hider (+$40), KNS Crosshair Aperture (+$31)
Popular Upgrades:
Barrel Type: Barrel Profile: Flash Hider: Barrel Twist: Handguard: Bolt: Bolt Carrier: Price:
Upper: Front Sights/Gas Blocks: Rear Sight: Trigger Group: Pistol Grip: Buttstock Assembly:
A-2 or Flattop
Front Sight Tower or Picatinny Rail Gas Block
$544.99
ACE Pistol Tube Assembly (+$35), Magpul MIAD Grip Kit, Basic (+$34), DSC Cayman Muzzle Device (+$35), DSC 4 Rail Gas Block (+$67)
Popular Upgrades:
Call us at 1-888-736-7725
15
Kits
Barrel Type: Barrel Profile: Flash Hider: Barrel Twist: Handguard: Bolt: Bolt Carrier: Price:
Upper: Front Sights/Gas Blocks: Rear Sight: Trigger Group: Pistol Grip: Buttstock Assembly:
$649.99
DSC Two Stage Trigger (+$105), Bipod Stud (+$15), Coated Barrel (+$50), ERGO Target Grip (+$45)
Popular Upgrades:
Barrel Type: Barrel Profile: Flash Hider: Barrel Twist: Handguard: Bolt: Bolt Carrier: Price:
Upper: Front Sights/Gas Blocks: Rear Sight: Trigger Group: Pistol Grip: Buttstock Assembly:
A-2 or Flattop
Forged Front Sight Tower or Picatinny Rail Gas Block
16 or 20 Heavy Barrel
$564.99
Magpul Moe Grip (+$15), Detachable Carry Handle (+$65), ACE ARFX Stock (+$70), DSC NM Free Float Tube (+$45)
Popular Upgrades:
Call us at 1-888-736-7725
16
Kits
Barrel Type: Barrel Profile: Flash Hider: Barrel Twist: Handguard: Bolt: Bolt Carrier: Price:
Upper: Front Sights/Gas Blocks: Rear Sight: Trigger Group: Pistol Grip: Buttstock Assembly:
A-2 or Flattop
Forged Front Sight Tower or Picatinny Rail Gas Block
16 DS-4 Barrel
$584.99
Ergo Sure Grip (+$20), ACE Hammer Stock (+225), OD Green Furniture (+$20), C Products 25 Round Magazines (+$18)
Popular Upgrades:
Barrel Type: Barrel Profile: Flash Hider: Barrel Twist: Handguard: Bolt: Bolt Carrier: Price:
Upper: Front Sights/Gas Blocks: Rear Sight: Trigger Group: Pistol Grip: Buttstock Assembly:
$699.99
ACE ARFX Stock (+$70), Ergo Target Grip (+$45), Bipod Stud (+$15), DSC Twang Buster (+$5)
Popular Upgrades:
Call us at 1-888-736-7725
17
Kits
Barrel Type: Barrel Profile: Flash Hider: Barrel Twist: Handguard: Bolt: Bolt Carrier: Price:
Upper:
A-2 or Flattop
Forged Front Sight Tower or
16 or 20 Heavy Barrel
Front Sights/Gas Blocks: Picatinny Rail Gas Block Rear Sight: Trigger Group: Pistol Grip: Buttstock Assembly:
Standard Semi Auto Standard A-2
$614.99
ACE ARFX-E (+$70), Ergo Sure Grip (+$20), C Products 25 Round Magazine (+$18)
Popular Upgrades:
Barrel Type: Barrel Profile: Flash Hider: Barrel Twist: Handguard: Bolt: Bolt Carrier: Price:
Upper: Front Sights/Gas Blocks: Rear Sight: Trigger Group: Pistol Grip: Buttstock Assembly:
A-2 or Flattop
Forged Front Sight Tower or Picatinny Rail Gas Block
16 DS-4 Barrel
$634.99
DS416 Handguard (+$130), Mil Spec Buttstock (+$15), Hogue Grip (+$20), Ambi, LH or RH Single Point Sling Mt. Eggplate (+$12)
Popular Upgrades:
Call us at 1-888-736-7725
18
Kits
Barrel Type: Barrel Profile: Flash Hider: Barrel Twist: Handguard: Bolt: Bolt Carrier: Price:
Upper: Front Sights/Gas Blocks: Rear Sight: Trigger Group: Pistol Grip: Buttstock Assembly:
A-2 or Flattop
Front Sight Tower or Picatinny Rail Gas Block
16 or 20 Heavy Barrel
$549.99
C Products 30 Round Magazine (+$20), GI Detachable Carry handle (+$65), DSC NM Free Float Tube (+$45)
Popular Upgrades:
Barrel Type: Barrel Profile: Flash Hider: Barrel Twist: Handguard: Bolt: Bolt Carrier: Price:
Upper: Front Sights/Gas Blocks: Rear Sight: Trigger Group: Pistol Grip: Buttstock Assembly:
A-2 or Flattop
Forged Front Sight Tower or Picatinny Rail Gas Block
Standard A-2 or None (Flattop Model) Standard Semi Auto w/ 9mm Hammer
Standard A-2
6 Position DS-4 Stock (Commercial Tube) w/ 9mm Buffer
N/A 9mm
$834.99
DS416 Handguard (+$130), C Products 32 Round Magazine (+$30), Detachable Carry Handle (+$65)
Popular Upgrades:
Call us at 1-888-736-7725
19
Kits
Barrel Type: Barrel Profile: Flash Hider: Barrel Twist: Handguard: Bolt: Bolt Carrier: Price:
Upper: Front Sights/Gas Blocks: Rear Sight: Trigger Group: Pistol Grip: Buttstock Assembly:
A-2 or Flattop
Forged Front Sight Tower or Picatinny Rail Gas Block
N/A
9mm Buffer Only (No Stock in Conversion Kit)
N/A 9mm
$719.99
1 Piece Colt Mag Block (Included)
Popular Upgrades:
Barreled Uppers
24 Bull-Barreled Upper
The superb accuracy of the bull barrel is, time and time again, the choice of match shooters! Comes with a 1x8 or 1x10 twist barrel flattop upper. Free float National Match two piece handguards, and gas tube assembly. Pictured with standard flattop upper. Also comes in 16, 20, and 22 lengths. Fluted & fluted ported options are only available in 16 , 20 & 24 lengths.
Barreled Upper.............................................................$399.99 With Bolt Carrier assembly and charging handle.....$509.99 Upgrade to Fluted Barrel............................................Add $50 Upgrade to Ported Barrel...........................................Add $50 Upgrade to Fluted Ported Barrel..............................Add $100
20 Marksman Upper
1x8 twist 416 stainless steel Wilson Air Guaged barrel on a flattop upper with Daniel Defense 12.0 free float rail system and A-2 Phantom Flash Hider. One-hole accuracy ready for any mission.
DSC Marksman Upper...............................$764.99 With Bolt Carrier assembly and charging handle....$874.99
16 Patrol Upper
1x9 twist chrome moly 16 Lightweight barrel mounted on aircraft quality aluminum upper. Comes fully assembled (less bolt carrier and charging handle). With DS416 rail handguards and A-2 Phantom Flash Hider. Ready for accessories out of the box.
DSC Patrol Upper.......................................$469.99 With Bolt Carrier assembly and charging handle....$579.99
Call us at 1-888-736-7725
20
Barreled Uppers
16 Critter Slayer Jr. Barreled Upper
Our unique upper has a 16 1x9 twist Expedition Barrel mounted on a flattop upper. Badger trapezoidal free float handguard with Draganov style slotting and a picatinny rail gas block round out this upper, providing an excellent feel and balance. Includes mounting stud for bipod. Critter Slayer Jr. Barreled Upper...........................$494.99 W/Bolt Carrier assembly and charging handle....$604.99
Expedition barrels have the lighter weight contour and tack driving capabilities! 1x9 twist chrome moly barrel mounted on mil-spec upper (flattop or A-2). Fully assembled (minus bolt/carrier and charging handle) with delta-ring assembly, forward assist assembly, gas tube assembly, ejection port cover assembly, and heat shielded handguards. Threaded Muzzle.
This upper centers around a Wilson Arms Premium Air Gauged Stainless Steel HBAR barrel with a 1 x 8 twist rate. Free float National Match two piece handguards, and gas tube assembly. Pictured with standard flattop. Also available in 16 Air Gauged HBAR Upper.......................................$409.99 W/Bolt Carrier assembly and charging handle...$519.99
The superb accuracy of the bull barrel in the compact frame of a CAR length rifle! Comes with a 1x8 or 1x10 twist barrel on a Flattop upper. Free float National Match two piece handguard, and gas tube assembly. Pictured with Hi-rise (+$10) 16 Bull Barreled Upper.............................................$399.99 With Bolt Carrier assembly and charging handle.....$509.99
1x9 twist, chrome moly, 16 Dissipator barrel is mounted on aircraft-quality aluminum upper. Comes fully assembled (minus bolt/carrier and charging handle) with forward assist, ejection port cover assembly, gas tube assembly and heat shielded handguards.
16 Bull-Barreled Upper
Pictured with Hi-Rise
16 Dissipator Uppers
Dissipator Upper.....................................................$399.99 W/Bolt Carrier assembly and charging handle....$509.99 Upgrade to Chrome Lined Barrel....................Add $50.00
16 DS-4 Uppers
4140 chrome-moly steel, 16 DS-4 barrel is mounted on aircraftquality aluminum upper. Barrels are plated evenly with tough parkerized finish. Comes fully assembled (minus bolt/carrier and charging handle) with forward assist, ejection port cover assembly, gas tube assembly and heat shielded handguards. Now available in 1x9 or 1x7 twist rate. DS-4 Upper.....................................................$334.99 Upgrade to Chrome Lined Barrel...........Add $50.00 4150 Chrome Vanadium 1x7 twist barrel w/M-4 feed ramps Chrome Lined.................$414.99 W/bolt carrier assembly and charging handle..............................Add $110.00 Upgrade DS-4 handguards.....................Add $10.00 Comes with a heavy match, 1x9 twist chrome moly barrel mounted on mil-spec upper (flattop or A-2). Comes fully assembled (minus bolt/carrier and charging handle) with delta-ring assembly, forward assist assembly, gas tube assembly, ejection port cover assembly, and heat shielded hanguards. 16 also available in A1 lightweight profile! 16 or 20.................................................................$324.99 W/Bolt Carrier assembly and charging handle....$434.99 Upgrade to Chrome Lined Barrel.....................Add $50.00
Call us at 1-888-736-7725
21
Barreled Uppers
16 Lightweight Tactical Fluted HBAR
Fluted 1x9 twist, chrome moly, 16 barrel is mounted on aircraft-quality aluminum upper. Coated evenly with tough parkerization. Fluting reduces flex, and vibration of the barrel, while increasing rigidity and decreasing weight. Upper comes fully assembled (less bolt/carrier and charging handle.) LW Tactical Upper..............................................................$384.99
W/Bolt Carrier assembly and charging handle...$464.99 Upgrade to Chrome Lined Barrel....................Add $50.00
Commando barrel is an 11.5 barrel with a permanently attached 5.5 flash-hider, which effectively increases the barrel length above the required 16. Comes fully assembled (minus bolt/carrier and charging handle) with forward assist, ejection port cover assembly, gas tube assembly and heat shielded handguards. Available in lightweight and HBAR profiles.
Barreled Upper........................................................$379.99 W/Bolt Carrier assembly and charging handle....$489.99 Upgrade to Chrome Lined Barrel....................Add $50.00
4140 Chrome-Moly Steel 14.5 DS-4 barrel is mounted on aircraft quality aluminum upper. Barrels are plated evenly with tough parkerized finish. Comes fully assembled (less bolt carrier and charging handle) with forward assist, ejection port cover assembly, gas tube assembly and heat shielded handguards. Now available in 1x9 or 1x7 twist.
14.5 SBR DS-4 Upper......................................................$344.99 Upgrade to Chrome Lined..........................................Add $50.00 Chrome Vanadium 1x7 twist barrel with M-4 feed ramps 4150 Chrome Lined 14.5 SBR DS-4 Upper....................$424.99 With bolt carrier assembly and charging handle...Add $110.00 Upgrade DS-4 handguards........................................Add $10.00 Upgrade to Permanently attached Phantom.............Add $75.00
1x9 twist, chrome moly, 14.5 DS-4 barrel is mounted on aircraft quality aluminum upper. Barrels are plated evenly with tough parkerized finish. Comes fully assembled (less bolt carrier and charging handle) with forward assist, ejection port cover assembly, gas tube assembly and heat shielded handguards.
SBR/M16 Upper....................................$344.99 With bolt carrier assembly and charging handle..............................Add $110.00 Upgrade DS-4 handguards.............Add $10.00 Upgrade to Chrome Lined...............Add $50.00 Upgrade to Perm. attached Phantom...+$75.00
11.5 Barreled Upper (All NFA Rules Apply) 11.5 barreled upper 1x9 twist, chrome-moly HBAR or Lightweight
barrel, on aircraft quality aluminum A-2 or flattop upper receiver. Comes fully assembled less the bolt/carrier and charging handle.
Barreled Upper........................................................$334.99 W/Bolt Carrier assembly and charging handle....$444.99 Upgrade to Chrome Lined................................Add $50.00
10.5 barreled upper 1x9 twist, chrome-moly HBAR or Lightweight barrel, on aircraft quality aluminum A-2 or flattop upper receiver. Comes fully assembled less the bolt/carrier and charging handle.
Barreled Upper.......................................................$334.99 W/Bolt Carrier assembly and charging handle...$444.99 Upgrade to Chrome Lined...............................Add $50.00
7.5 barreled upper 1x9 twist, chrome-moly HBAR barrel, on A-2 or flattop upper receiver. Comes fully assembled less the bolt/carrier and charging handle.
Barreled Upper.......................................................$374.99 W/Bolt Carrier assembly and charging handle...$484.99 Upgrade to Chrome Lined...............................Add $50.00
Call us at 1-888-736-7725
22
Call us at 1-888-736-7725
23
16 HBAR barreled upper 1x10 twist, chrome-moly barrel, on aircraft quality aluminum A-2 or flattop upper receiver. Comes fully assembled with bolt carrier assembly and charging handle. Complete Upper........................................$494.99 Upgrade to Chrome Lined Barrel......Add $50.00
Chrome-moly LW barrel with picatinny rail gas block, on aircraft quality aluminum flattop upper receiver. Made for use with Colt style conversions. Comes fully assembled with bolt carrier and charging handle.
Complete Upper............$559.99
Chrome-moly LW barrel, on aircraft quality aluminum A-2 or flattop upper receiver. Made for use with Colt style conversions. Comes fully assembled with bolt carrier and charging handle. Complete Upper....................$519.99
Barrels
16
20
24
1x 8 or 1x10 twist, 416 stainless steel barrel. Rifles with this barrel installed get repeated reports of 1 hole at 100 yards! All Bull Barrels include gas block. 16 1x8 AR508...........$199.99 16 1x10 AR508B.........$199.99 20 1x8 AR506...........$199.99 20 1x10 AR506B.........$199.99 22 1x8 AR504...........$199.99 22 1x10 AR504B.........$199.99 24 1x8 AR500...........$199.99 24 1x10 AR500B.........$199.99 Ported Bull Barrel 16 1x8 AR509...........$249.99 16 1x10 AR509B.........$249.99 20 1x8 AR507...........$249.99 20 1x10 AR507B.........$249.99 22 1x8 AR505...........$249.99 22 1x10 AR505B.........$249.99 24 1x8 AR501...........$249.99 24 1x10 AR501B.........$249.99 1x 8 or 1x10 twist, 416 SS Fluted grooves increase rigidity of the barrel, reducing flex and vibration, and increases surface area by as much as 80%. Fluting improves the barrels cooling and reduces the weight by 10%. Also available fluted and ported. All Bull Barrels include gas block. 16 1x8 AR510...........$249.99 16 1x10 AR510B.........$249.99 24 1x8 AR502...........$249.99 24 1x10 AR502B.........$249.99 Fluted Ported Bull Barrel 16 1x8 AR511...........$299.99 16 1x10 AR511B.........$299.99 24 1x8 AR503...........$299.99 24 1x10 AR503B.........$299.99
Price: $50.00
Call us at 1-888-736-7725
24
Barrels
16 and 20 Match Barrels
16 HBAR Barrel Six groove, RH twist, button rifled, 1x9 twist, parkerized finish. 16 Lightweight, Barrel AR550...................................$189.99 16 Lightweight, Barrel, Chrome Lined AR550CL....$239.99 16 HBAR Barrel AR551..............................................$189.99 16 HBAR, Barrel, Chrome Lined AR551CL..............$239.99 20 HBAR Barrel AR530..............................................$189.99 20 HBAR Barrel, Chrome Lined AR530CL...............$239.99 Fluting increases barrel rigidity, while decreasing barrel flex, and vibration. Also decreases the weight significantly and helps with cooling. 1x9 twist, chrome-moly steel, parkerized coating. 16 Fluted HBAR Barrel AR574.........................$239.99 16 Fluted Chrome Lined Barrel AR574CL.....$289.99
20 HBAR Barrel
16 or 20 Stainless Steel Wilson Arms Premium Grade Air Gauged Match HBAR Barrels 1x8
16
These premium grade barrels will satisfy even the shooting elites strict requirements. Finished with a 5.56 Nato chamber to accommodate the widest range of ammunition possible. Available with either a picatinny rail gas block or forged front sight tower. 20 w/ Sight AR531...................$219.99 20 w/ Gas Block AR531G........$219.99 16 w/ Sight AR536...................$219.99 16 w/ Gas Block AR537G........$219.99 Ceramic Coating available.......+$50.00
20
Coated with 20 w/sight shown
Expedition Barrels
16 1x9 twist, chrome-moly steel, Expedition barrels have lighter front contour and an integrated muzzle brake. 16 Expedition Barrel AR572..........$229.99
1x9 twist, dissipator barrel allows for installation of A-2 length handguard and offers a full sight radius. Uses the CAR Length gas system for improved reliability. Dissipator Barrel AR581........................$249.99
16 DS-4 Barrels
1x9 twist, chrome moly match barrel, parkerized finish. 16 Govt DS-4 Barrel AR561.............................$189.99 16 Govt DS-4 Chrome Lined Bbl AR561CL....$239.99 16 Govt DS-4 Barrel 1x7 Twist AR560.............$189.99 16 Govt DS-4 Chrome Lined 1x7 AR560CL...$239.99 16 DS-4 Chrome Lined 1x7 AR562CL..........$239.99 16 Govt Profile DS-4 Chrome Lined 1x7, 4150 Chrome Vanadium Steel with M-4 Feed Ramp Barrel Extension AR565CL................................................$264.99 1x9 twist 11.5 barrel with 5.5 flash-hider permanently attached to bring the overall length to a legal 16.1. 16 HBAR AR527..........$239.99 16 HBAR AR527CL.....$289.99 16 LW AR528...............$239.99 16 LW AR528CL..........$289.99
16 Commando Barrel
Call us at 1-888-736-7725
25
Barrels
14.5 Lightweight Barrel (All NFA Rules Apply)
1x9 twist, six groove, RH twist, button rifled, parkerized, bayonet lug, threaded muzzle. 14.5 Lightweight AR605................................$199.99 14.5 Lightweight Chrome Lined AR605CL..$249.99 w/Perm. Attached Phantom............................+$75.00
1x9 twist, 4140 chrome moly match barrel, parkerized finish, threaded muzzle, and bayonet lug. All NFA Rules Apply 14.5 Govt DS-4 Barrel AR601.............................$199.99 14.5 Govt DS-4 Chrome Lined Bbl AR601CL....$249.99 w/Perm. Attached Phantom..................................+$75.00
11.5 HBAR
1x9 twist, six groove, RH twist, button rifled, parkerized, bayonet lug, threaded muzzle. 10.5 HBAR AR616..........................................$199.99 10.5 HBAR Chrome Lined AR616CL...........$249.99 10.5 Lightweight AR615................................$199.99 10.5 Lightweight Chrome Lined AR615CL..$249.99 11.5 HBAR AR611..........................................$199.99 11.5 HBAR Chrome Lined AR611CL...........$249.99 11.5 Lightweight AR610................................$199.99 11.5 Lightweight Chrome Lined AR610CL..$249.99
1x9 twist, six groove, RH twist, button rifled, parkerized, threaded muzzle. 7.5 HBAR Barrel AR621......................$199.99 7.5 HBAR Chrome Lined AR621CL....$249.99
Available with Gas Block or sight tower.
4140 Chrome Moly Steel. Includes barrel, barrel nut, HG cap, and forged front sight tower. Includes special 7.62x39 bolt. 1/2x36 tpi. 16 HBAR AR925...................................$289.99 16 HBAR, Chrome Lined AR925CL....$339.99 20 HBAR AR920...................................$289.99 20 HBAR, Chrome Lined AR920CL....$339.99
20
Call us at 1-888-736-7725
26
special 6.5 Grendel bolt. 20 6.5 Grendel Bull AR971..................$354.99 22 6.5 Grendel Bull AR972..................$354.99 24 6.5 Grendel Bull AR970..................$354.99 KG Gun Coat finish available for a $50 upgrade. Add C suffix to part number when ordering. 6.5 Grendel chambered, 4140 Chrome Moly Steel. 1x9 Includes barrel, barrel nut, HG cap, and forged front sight tower. Includes special 6.5 Grendel bolt. 1/2x36 tpi. 16 HBAR AR975....................................$349.99 16 HBAR, Chrome Lined AR975CL.....$399.99 20 HBAR AR976....................................$349.99 20 HBAR, Chrome Lined AR976CL.....$399.99
20
Barrel Parts
XS Tactical Sights for AR-15
Dramatically improves your sight picture in all light conditions and increases sight acquisition speed. Tritium Stripe Front Sight XAR2016.........................$59.99 Std. Dot Front Sight XAR2014..................................$59.99 Same Plane Ghost Ring Rear XAR2029...................$29.99 Tritium Ghost Ring Rear XAR2039...........................$74.99 XS Tactical Sight Sets Same Plane GRA/.08 Striped Post XAR0011............$59.99 Same Plane GRA/.10 Striped Post XAR0012............$59.99 Same Plane GRA/Big Dot Tritium Front XAR0023....$89.99 Same Plane GRA/Std Dot Tritium Front XAR0024....$89.99 Same Plane GRA/Tritium Stripe Front XAR0048.......$89.99 Tritium GRA/Tritium Stripe Front XAR0049.............$134.99
AR Tactical
Hooded Duplex
Replaces post sight without modifications to the gun. Standard crosshair size .010 dia, Duplex crosshair size .010/.020 dia. Tactical is Duplex crosshair with adjustable Vertical dot. Standard K151..................$32.99 Hooded Std K152..............$32.99 Std Duplex K153...............$32.99 Hooded Duplex K154........$32.99 AR Tactical K158...............$45.99
Call us at 1-888-736-7725
27
Barrel Parts
Barrel Parts
Diagram # Description Price Part #
AR410 ARC157 AR414 AR413 AR411 AR412 AR412P AR465 AR466 AR472 AR431 AR432 AR433 AR430 AR436 AR436L AR437 AR441 AR442 AR443 AR445 AR446 AR435 AR434 AR448 AR449 AR450 AR444 AR444D 1. A-2 Handguards w/ Liners........................ $15.99 1(a). Colt Mfg. handguard assembly, A-2...........$24.99 1(b). Carbine Handguards with Liners............... $15.99 2. Gas Tube Roll Pin......................................$ .99 3. Gas Tube Std. ...........................................$11.99 3(a). Gas Tube Car.............................................$11.99 3(b). Gas Tube Pistol......................................... $11.99 4. Flash Hider, A2.......................................... $ 7.99 4(a). Flash Hider, A1.......................................... $ 7.99 5. Crush Washer............................................. 2.99 $ 6. Barrel Snap Ring........................................$ 1.99 7. Weld Spring............................................... $ 5.99 8. Delta Ring.................................................. $ 7.99 8(a). Delta Ring Assembly..................................$12.99 9. Barrel 10. Handguard Cap Round, HBAR................. $ 2.99 10(a).Handguard Cap Round LW........................$ 2.99 10(b).Handguard Cap Triangular HBAR..............$ 2.99
Barrel/Sights
1 2 7 3 6 5 9 4 8
Diagram #
Description
Price Part #
$4.99 $.99 $.99 $3.99 $.99 $6.99 $19.99 $29.99 $29.99 $49.99 $1.99 $1.99
1. Front sight post, A-2, square................. 2. Front sight detent................................. 3. Front sight detent spring...................... 4. Front swivel.......................................... 5. Front swivel rivet.................................. 6. Barrel nut............................................. 7. Barrel extension................................... 8. Front sight base, heavy........................ 8.(a) Front sight base, standard................... 8.(b) Front sight base, milled for flattop........ 9. Front sight taper pin (2 required) each 9.(a) Front sight dowel pin (2 required) ea.
Call us at 1-888-736-7725
28
DSC Cayman
Another first from DoubleStar. Not only is the Cayman an effective compensator, but it also works well as an impact tool. DS479....$39.99 1/2x28 tpi
Strike
The Strike flash hider is a great upgrade for any 1/2x28 tpi barrel. Its aggressive look is sure to maximize any AR15 rifle. CC455.....$39.99 1/2x28 tpi
Eliminator
The Eliminator does just what it says. With virtually no flash signature the Eliminator is one of the best flash suppressors on the market. JT475....34.99 1/2x28 tpi
JP Muzzle Brakes
Directs gasses up and to the sides so shooter is not exposed to the concussion and no dust is thrown up when shooting prone or off a bipod.
1/2 x28 TPI JPRE-2..................$99.99 5/8x28 TPI Matte JPRE428....$109.99 5/8x28 TPI SS JPRE428S.......$119.99 1/2x28 TPI Matte JPTRE-2.......$89.99 1/2x28 TPI SS JPTRE-2S..........$89.99 5/8x28TPI Matte JPTRE-3.........$89.99
Call us at 1-888-736-7725
29
KAC QD Compensator
This flash suppressor allows quick installation and removal of the KAC Sound Suppressor. Includes shim set. KAC93048.........$89.99
Upper Receivers
All J&T upper receivers are forged from aircraft quality 7075 T6 aluminum to military specifications.
A-2 Upper
Complete upper AR150......$134.99 Stripped upper AR151..........$99.99 Complete upper AR150M w/ M4 Feedramp.................$154.99 Stripped upper AR 151M w/ M4 Feedramp..................$119.99
A-1 upper
Complete Upper AR230.......$134.99 Stripped Upper AR231.........$109.99
Rebuild Kits
Bolt Carrier Rebuild Kit
Includes all of the parts needed to completely rebuild your bolt and carrier. Includes: extractor, extractor spring & pad, extractor pin, ejector, ejector pin, ejector spring, 3 bolt gas rings, carrier key, 2 carrier key screws, firing pin, firing pin retainer, and O ring AR789................$37.99
Call us at 1-888-736-7725
30
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 9. 18. 19. 20.
Call us at 1-888-736-7725
31
Bolt Assembly
Made to military specifications, these come complete with extractor assy, ejector assy, and gas rings. Available in standard parkerization or hard chromed.
AR-15 Standard Bolt Carrier assy AR100...........$124.99 AR-15 Chrome Bolt Carrier assy AR130.............$184.99 AR-15/M-16 9MM Bolt Assembly ARC124...........$199.99 For M-16 carrier assy add M suffix to the part number.
JP Carrier
JP Full Mass Stainless Tactical Carrier with key installed for M16-type select fire rifles. Not for use in AR-10-type rifles. Weight: 8.75 oz with key installed. JPBC-16.....$199.99
MGIs new Enhanced Reliability Firing Pin and Bolt for use in the 7.62x39 AK-47 configuration of the Hydra Modular Weapon system. The Firing pin and bolt more closely mimicks a true AK-47 firing system giving much greater reliability while firing the 7.62x39 ammo. Wolf ammunition themselves recomends this enhancement while firing 7.62 ammo!! ????....$125.99
Bolt Parts
Bolt Assembly
Diagram # Description Price 1. Bolt Gas Rings (set of 3)........... $2.99 2. Extractor Pin.............................. $1.99 3. Extractor..................................... $14.99 4. Ejector Roll Pin.......................... $ .99 5. Ejector Spring............................ $ .99 6. Ejector......................................... $ 2.99 7. Extractor Spring Assembly....... $ 1.99 8. Bolt Assembly (Assembled)..... $49.99 Part # AR112 AR123 AR121 AR115 AR114 AR113 AR122 AR110
Bolt Carrier
Diagram # Description 1. 1.(a) 2. 3. 4. 4.(a) 4.(b) 5. 6. Price Part # AR106 AR106T AR107 AR103 AR102 AR101 AR101M AR105 AR104 Firing Pin............................... $7.99 Firing Pin, Titanium.............. $24.99 Firing Pin Retaining Pin....... $ 1.99 Cam Pin..................................$ 5.99 Bolt Carrier & Key................. $79.99 Bolt Carrier stripped............. $64.99 Bolt Carrier Stripped, M16....$64.99 Bolt Carrier Key Screws....... $ 0.99 Bolt Carrier Key..................... $12.99
Call us at 1-888-736-7725
32
Receiver Parts
Diagram # Description Price Part # 1. Buffer detent..............................$ 1.99 AR306 2. Buffer detent spring..................$ .99 AR307 3. Trigger guard, aluminum.......... $ 5.99 AR304 3(a). Trigger guard, Al., Radiused.... $ 6.99 AR304R 4. Trigger guard pin...................... $ .99 AR305
Call us at 1-888-736-7725
33
JP Trigger
The JP trigger is metallurgically correct and features engagement and over travel adjustments in combination with completely re-engineered precision ground sear geometry, eliminating most of the hammer camming effect so prevalent with the original parts. Disconnector timing is correct thereby eliminating the fire on release or doubling problem, when properly installed. The extremely short reset of the hammer ensures a durable relationship between the parts. .156 Trigger kit w/ Speed Hammer & Pins JP110...............$179.99 .172 Trigger kit w/ Speed Hammer & Pins JP111................$179.99
Call us at 1-888-736-7725
34
Trigger Groups
As of May of 1986 there can be no new machine guns made for the civilian population. M-16 parts are available only to those individuals with Form 4s or FFLs on file. We do not sell any conversion parts, only replacement parts for registered machine guns. Having M-16 parts in your AR-15 type rifle can be construed as a felony. See the pictures below for help identifying your components. If you have any questions contact BATFE at 1-800-ATF-GUNS.
Trigger
Hammer
Disconnector
Selector
AR-15 M-16
KNS Front Pivot Pin with Swivel Stud (All NFA Rules Apply)
Replaces the standard front pivot pin. Allows use of quick release sling swivels. Increases match accuracy by eliminating all tension on barrel and upper receiver when shotting with a sling. .250 Diameter K110........$13.99 .315 Diameter K111........$13.99
Ambidextrous selector with no screws or threading to come loose or strip; utilizes stainless steel detent plungers to lock levers into place. The traditional lever side has been built for a more positive feel. The right side features a lower profile lever and will not interfere with trigger operation for right handed shooters. Rugged machined billet tool steel construction.
Call us at 1-888-736-7725
35
Trigger Groups
Troy Ambi Bolt Catch
Easily release bolt with either left or right hand. Streamlines firearm clearing and reloads after a malfunction. Improved control without hand changeovers. TI153.....$29.99
Pistol Grips
Hogue Grip
The Hogue grip is designed to retain the lines and aesthetics of the AR, while at the same time providing a comfortable rubber grip with finger grooves. Black. HG101......$24.99
Ergo Tactical and Tactical Deluxe grips fit the AR-15 family of rifles. The Tactical grip is ambidextrous, while the Deluxe model features a thumb shelf on left side, palm swell on right, both offer an adjustable palm shelf. Tactical Deluxe Grip F4050...............................$54.99 Tactical Deluxe Grip S.G. F4055...............................$59.99
Gapper
Soft, polyurethane pad fits between pistol grip and frame to fill the gap under the trigger guard. Provides a smooth transition between grip and frame; prevents the sharp edges of the frame from rubbing or cutting your index finger. F4085......$3.99
Ergo Grip AR
Hand-filling, ergonomic profile with palm swells, thumb rests and many other features improves shooting comfort and accuracy. Grips are molded from extremely durable polyurethane or from recoil absorbing Santoprene. Each grip has a non-slip, pebble-grain, textured finish. Black. R H Sure Grip F4000.....$25.99 Ambi Sure Grip F4005..$25.99
Ambi Suregrip models are also available in OD Green and Dark Earth. Specify OD Green (OD suffix) when ordering.
Available in Black, Coyote Brown or OD Green. Specify Black (B suffix), OD Green (OD suffix), or Flat Dark Earth (FDE suffix) when ordering.
Call us at 1-888-736-7725
36
Pistol Grips
Magpul MOE Pistol Grip
The MOE grip provides Magpul quality, feel, and durability in an economical, drop-in upgrade for the standard AR15/M16/M4 pistol grip. The ergonomic, hand filling design combines aggressive texturing with storage core capability. With a similar shape to a medium sized MIAD, the one-piece reinforced polymer construction provides simplicity and a reduced cost while still maintaining the durability needed to withstand operational environments. The MOE Grip accepts optional storage cores for gear stowage and includes a basic grip cap. All mounting hardware included. Magpul MOE Grip - AR15/M16....$20.99
TI251.......$19.99
Vertical Grips
Ace Vertical Grip
The addition of a vertical foregrip will drastically improve the handling of your weapon. It is easily one of the best accessories that you can add.
KC Vertical Grip
This molded, polymer, vertical grip attaches to all Picatinny and Weaver-style accessory rails superior control and improved weapon retention. Offers a large compartment for battery or spare parts storage. Rubber O-ring prevents accidental loosening. KC101....$19.99 K Grip Profile. Clamps rigidly to any picatinny style rail with one nylon machine screws. Available in machined black Delrin or indestructable hard anodized aluminum. Delrin VG-KD A181.............$34.99 Aluminum VG-KA A180......$34.99
Call us at 1-888-736-7725
37
Vertical Grips
YHM Quick Action Grip
This grip is actuated with the push of a button. It locks securely in the folded and battle-ready positions. Designed to function properly even under strenuous military use. Installs easily on any picatinny rail with the use of the supplied socket head cap screw. YH9640......$74.99 Designed and manufactured for use in tough combat situations, this grip will fold and lock in 3 positions simply by loosening, setting to the desired position, and tightening the handle. Built to install easily on any picatinny rail. YH9560.....$46.99
AAC Swiss Vertical Foregrip XTA Vertical Grip & Rail Mount
Includes a 6 aluminum rail that mounts on nearly any standard handguard & a nylon vertical foregrip. X1505......$19.99 Molded, polymer, vertical grip attaches to Picatinny and Weaver-style accessory rails on your AR15 handguard for superior control and improved weapon retention. Grooved, grip area ensures positive, non-slip hold in all tactical situations. Reduces fatigue and improves muzzle control in close quarters. Threaded shaft, with tightening knob, locks grip to rail, plus, makes removal fast and easy when shooting from a bench or bipod. Rubber O-ring prevents accidental loosening. AAC101........$24.99 Specify black when ordering
Call us at 1-888-736-7725
38
Handguards
DSC A-2 Handguards DSC Mid-length Handguards
Similar to the CAR handguard but made for the mid-length gas system. Includes single heat shield. AR421......$17.99
Our new single heat shielded A-2 hanguard has a nice textured feel and have minimal gap, for a very clean profile. AR410.......$18.99
Pictured w/ adapter installed, barelled upper & rail HGs not included. This adapter allows you to use a 2 piece standard handguard or rail system on any HBAR or lightweight barrel while maintaining the CAR gas system. Includes adapter and handguard cap. Please specify which cap you need. *Not a functioning gas block. DS450 HBAR......$39.99 DS451 LW...........$39.99
Rail Handguards
DSC 2 Piece CAR Rail Handguard System KAC RAS-II
This free floating version of the M-4 RAS must be installed on a Mil-Spec flattop upper. Does not require removal of front sight tower for installation, & uses standard barrel nut. Includes three 11-rib panels. KAC22243........$349.99
Our patented slimline handguard system is a direct replacement for standard CAR or M-4 handguards. The RHS features 4 1913 rails with the top rail the same height as your flattop upper while the two side rails are brought in closer for a slimmer profile providing more comfort and better handling. Made from 6061 T6 aluminum with a Mil-Spec hard coat anodized finish. CAR Length DS416........$139.99 Rifle Length DS420........$189.99
Call us at 1-888-736-7725
39
Rail Handguards
KAC M-5 Rifle RAS
M5 RAS For 20 Barrels -- Installing the KAC fore-end rail system is the first step in modernizing your weapon to Modular Weapon System status. KAC fore-end rail systems have four parallel Military Standard 1913 rails. One each above, below, and along the sides of the barrel. They allow the user to mount a variety of useful accessories such as reflex sights, lasers, forward pistol grips, flashlights, bipods, etc., with minimal effort! Installation is simple, does not require special skills or tools, and does not permanently alter your weapon! Rifle RAS KAC98065.......$374.99
Pistol Length (YH9809A).......$104.99 CAR Length (YH9631)............$119.99 Mid Length (YH9634).............$129.99 Specter Length (YH9638)......$129.99 Rifle Length (YH9636)............$159.99
Pistol Length (YH9808A)........$104.99 CAR Length (YH9479).............$119.99 Mid Length (YH9603)...............$129.99 Specter Length (YH9477)........$129.99 Rifle Length (YH9480)..............$159.99
Call us at 1-888-736-7725
40
Rail Handguards
Surefire Rail Handguard Assembly
The Surefire four rail handguard mount assembly is a high-quality Picatinny fore-end for AR/M4-type carbines that replaces the weapons stock handguards allowing the user to mount a variety of accessories. Machined from military specification hard-anodized aluminum, the M73s precision dimensioning allows for consistent repeat zero positioning when matched to an accurately dimensioned mounting device such as those found on SureFire Weapon Lights. CAR/M-4 SF173.........$209.99 Rifle SFM82................$244.99 Mid Length SFM81.....$211.99
Call us at 1-888-736-7725
41
Handguard Rails
Falcon Industries 642 Rail
This nylon UMP will accept the ERGO VFG, lights, bipods, and other rail accessories designed for the Picatinny Rail configuration. The UMP includes mounting hardware for attaching it to A-2 standard, CAR, & M-4 handguards. This 6 rail can be trimmed to 4 or 2 lengths for a custom fit. 2 Rail F4356-2......$7.99 4 Rail F4356-4......$7.99 6 Rail F4356-6....$10.99 The UMP will accept the ERGO VFG, lights, bipods, and other rail accessories designed for the Picatinny Rail configuration. The UMP includes mounting hardware for attaching it to A-2 standard, CAR, & M-4 handguards. 2 Model F4352......... $15.99 4 Model F4350..........$19.99 6 Model F4353..........$22.99
Designed for use with MOE Handguards and most standard plastic handguards, the MOE Polymer Rail Sections allow the attachment of various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc. MP406 5 Slots......$5.99 MP407 7 Slots......$6.99 MP408 9 Slots......$7.99 MP409 11 Slots....$8.99
Rail Panels
DSC Rail Panels
Full Cover Panels
Snap-on-guards cover sharp edges of accessory rails for a comfortable hand hold. Protects exposed portions of handguard mounted rails from damage. Provides a soft cushion that helps prevent snagging and accidental damage to equipment and storage cases. Two styles: Full Cover snaps over Picatinny and Weaver-style rails and bases; provides complete rail coverage. Low Profile fits into Picatinny rail cross-slots to reduce bulk, yet give a comfortable handhold. Will also fit Weaverstyle bases. Full Cover 7-slot F4360..................$ 3.99 Magpul XTM Rail Panel Full Cover 10-slot F4361................$ 7.99 The low-profile XTM Rail Panels are a two-piece Full Cover 15-slot F4362...............$11.99 design that attach anywhere on a 1913 Picatinny Low Profile 7-slot F4378-3 pk.......$17.99 rail without having to remove previously-mounted Low Profile 18-slot F4373-3 pk....$35.99 accessories. The combination of design and Specify Black (B suffix), OD Green (OD suffix), material used in the XTM Panels ensures they will remain securely in place under all operating condior Coyote Brown (CB suffix) when ordering.
Low Profile Panels
tions, but may be easily removed using the tips of two rounds when necessary.
MP410....$7.99 Specify Black, OD Green, Flat Dark Earth or Foliage when ordering.
Call us at 1-888-736-7725
42
Rail Panels
Troy Rail Cover
Troy Firearms Rail Covers are engineered to survive the most extreme conditions. Constructed from durable, heat- & chemical-resistant synthetic polymer resin, The Troy Firearms Rail Cover quickly and easily slides onto a 1913 Picatinny Rail and locks into place with a built-in retaining clip. No tools required. Available in three colors: Black, Flat Dark Earth and Foliage Green. Please specify color when ordering. 3 Pack TI154.......$20.99 Individual TI155....$7.99
F4365.............$11.99
Specify Black (B suffix), OD Green (OD suffix), or Combat Beige (CB suffix) when ordering.
Specify Black (B suffix), OD Green (OD suffix), or Coyote Brown (CB suffix) when ordering.
Rear Sights
A.R.M.S. # 40 Flip Up Rear Sight
The unique design of the spring loaded rear sight, ensures constant battery action and repeat zero. The sight is held in the locked down position by a quick release lever, that prevents the sight from being accidentally engaged. The initial elevation zero utilizes the standard M16/M4 front sight bead. The A.R.M.S. spring loaded flip-up sights never let you down, because theyre designed to always be there even when going thru brush or being dropped. AR40.........$104.99 AR40A2 (Std. A-2 Aperture)...$104.99
The new DSC flip-up rear sight is made from lightweight aluminum and uses the A-1 adjustment wheel with an A-2 aperture. DS401......$99.99
PA101..................$114.99
Call us at 1-888-736-7725
43
Rear Sights
GG&G Spring Actuated A-2 BUIS Flip-up Sight
The New GG&G A-2 Spring Actuated BUIS (Back Up Iron Sight) is the latest evolution in our BUIS product line. Many operators requested that GG&G manufacture an A-2 BUIS that would deploy with just a push of a button. The unique and proprietary design of the mechanism allows the actuator spring and mechanical components to be captivated and therefore not be open to the environmental elements. The sight not only springs into an on target position with just the push of the actuator button, but it also locks solidly into the upright on target position. No other spring actuated BUIS offers this important feature. Another push of the button and the lock is released allowing you to set the sight into the locked down position. Unlike others in the market place, this can easily be accomplished with just one hand. GGG1005SA................................$159.99 Tritium version GGG1005SAT....$209.99
This sight can be used as part of the F.I.R.E. system, but offers the standard A-2 sighting configuration. The A-2 BUIS features two apertures and full windage adjustment. GGG1005.................$124.99 Tritium Version GGG1005T...............$169.99
LMT8A........$119.99
Call us at 1-888-736-7725
44
Rear Sights
Troy DOA Folding Rear Sight
These sights provide lightning fast target acquisition and are manufactured to exceed military specs. The optically engineered apertures center your eyes instantly and effortlessly providing a clearer target picture than with round apertures.
T101........$119.99
TI158.....$119.99
TI159.......$65.99 TI160...$199.99
TI161........$65.99
MP248.......$57.99
Call us at 1-888-736-7725
45
YHMs new steel flip front sight. This durable sight is available to either attach on a YHM Gas Block (YH9584) or on a rail handguard (YH9627) to give you a backup iron sight. The sight folds out of the sight line with the push of a button and flips and locks in the deployed position with ease. Mounts quickly and easily with the included thumb screw. Accepts all standard AR sight posts. Rail Handguard YH9627...........$81.99 Gas Block YH9584....................$81.99
GG&G Bolt-On Tactical Modular Flip Up Front Sight Gas Block System
The New GG&G Bolt On Flip Up Front Sight Gas Block is a top of the line flip up front sight gas block system that is easy to install. The Flip Up Front Sight Gas Block is secured in place by a Tri-Point clamping mechanism guaranteeing consistent accuracy and trouble free operation. The sculpted finger groove design is not only ergonomic but allows for quick deployment. Manufactured from 4140 chrome moly billet steel with hardened wear points and finished by a mil spec manganese phosphate process, this unit is ready for rugged use. As a method of standardization the M16A2 square front post is used, which is fully adjustable for elevation zero. Protective ears are provided for the sight with additional gripping serrations to aid in raising and lowering the sight assembly. Additionally, there is a provision for the easy attachment of an optional MIL-STD-1913, ambidextrous 1-inch long dovetail for mounting flashlights, LAMs and other small accessories onto the gas block base. GGG1297................$174.99
Call us at 1-888-736-7725
46
Call us at 1-888-736-7725
47
This Bull diameter gas block allows the user to mount accessories to its four picatinny rails. Made from high quality steel and finished with a mil-spec phosphate coating. W165.....$55.99
Buttstocks
Ace Buttstocks include your choice of buttpad either 1/2 or 1. For 1/2 pad add A suffix and for 1 pad add B suffix ACE Hammer Stock
Worlds strongest AR stock, machined from heat-treated aircraft aluminum. Laser etched position marks with a 7 position tube to ensure the perfect fit. Five spring loaded ball bearings ensure smooth tube transitions and a locking adjustment trigger. Also features an adjustable cheek rest and strike plate. A126A.....$299.99 1/2 or 1 Rubber Buttpad.....+$15.00
Experience for yourself the improved feel of this lighter weight buttstock from Ace Ltd. Does not include buffer tube, buffer or spring. CAR length includes buffer tube. Full length (9 1/2) A101.................$89.99 Full length assy. (w/ buffer, tube, & spring) A105....$119.99 CAR length (7 1/8) A110................$99.99 CAR length assy. (w/ buffer, tube, & spring) A115....$119.99
AR-UL Rifle Length A140..................................$99.99 Rifle Length Assy. A140A................................$114.99 AR-UL-E Entry Length A145.............................$99.99 Entry Length Assy. A140A..............................$114.99 AR-UL-Butt Ultra-light Buttplate Only A141....$34.99 AR-UL-Gus Ultra-light Gusset Only A146.......$34.99
Call us at 1-888-736-7725
48
Buttstocks
ACE M-4 SOCOM Stock Gen 4
Approximately 6 times stronger than an AR15 A-2 stock & receiver extension tube. Ideal for CQB or breaching doors, without the fear of bending the receiver extension tube. Adjustable length of pull, adjusts from 7.5 to 9.5 (standard version) or 9.5 to 11.5 (long version) in five 1/2 increments. Closedcell foam overtube provides an extremely comfortable cheek weld. Std. Length A150.....................$199.99 Longer Length A160................$219.99 Std. Length Assy. A151............$215.99 Longer Length Assy. A161.......$234.99
DS-4 Buttstock
This newly designed tele-stock is completey radiused of sharp edges, beefed up around the trigger latch area, and features a squared hole design to allow sand, dust and grit to pass through the tube area. The special body style is ribbed for extra strength and durability. The tube was specially designed with a lower lip that acts as a timing lip to insure the buffer retainer is held correctly and the extension is positioned in the correct location, and is dry film lubed for smooth action. Offers six positions of adjustment to fit nearly everyone. Includes a CAR buffer with cylindrical weights and recoil spring. Black. Pre Ban Commercial Tube - AR390........$74.99 Pre Ban Mil-Specl Tube - AR395.............$89.99 Post-ban (Fixed) AR390F.........................$79.99 Also available in Coyote Brown and OD Green. Specify OD Green (OD suffix) or Coyote Brown (CB suffix) when ordering.
EMOD
Highly versatile stocks that offer two different cheek weld options, water-tight battery storage capabilities, and QD sling swivel hard points. Attaches to your rifle buffer tube or your Mil-Spec CAR buffer tube (Not Included). EMod buttstock is available for either Mil-Spec or Commercial buffer tubes. Black. Rifle Modstock VR1S ....................................$124.99 Rifle Modstock Clubfoot VR1C......................$124.99 CAR Modstock VC1S.....................................$119.99 CAR Modstock Clubfoot VC1C......................$119.99 EMOD Modstock Commercial VEC...............$125.99 EMOD Modstock Mil-Spec VEM....................$125.99 Also available in Flat Dark Earth or OD Green. Specify OD (OD suffix), or Flat Dark Earth (FD suffix) when ordering. VLTOR Buttstock Assys: Includes buffer tube, buffer, and buffer spring. Rifle Modstock Assy VR1SA..........................$159.99 Rifle Modstock Clubfoot Assy. VR1CA..........$159.99 CAR Modstock Assy VC1SA..........................$174.99 CAR Modstock Clubfoot Assy. VC1CA...........$174.99 EMOD Modstock Assy, Commercial VECA....$174.99 EMOD Modstock Assy, Mil-Spec VEMA.........$196.99 Also available in Flat Dark Earth or OD Green. Specify OD (OD suffix), or Flat Dark Earth (FD suffix) when ordering.
Call us at 1-888-736-7725
49
Buttstocks
Magpul CTR Buttstock
The CTR is designed to be a drop in replacement carbine stock body. Adjustable for length of pull. This stock features a unique locking mech that friction locks the stock to the buffer tube for zero movement. Commercial CTR includes spacer butt-pad. Available for both MilSpec and commercial tube diameters. Commercial tube version M311.................$97.99 Mil-Spec tube version M310.......................$97.99 Also available in Flat Dark Earth or OD Green.
Specify OD Green (OD suffix), or Flat Dark Earth (FD suffix) when ordering.
CTR Buttstock Assys. Includes buffer tube, buffer, and spring. Commercial tube version Assy. M311A...$139.99 Mil-Spec tube version Assy. M310A.........$154.99 .25 Cheek Riser M325................................$19.99 .5 Cheek Riser M326..................................$19.99 .75 Cheek Riser M327................................$19.99 Rubber Buttpad M315.................................$19.99 Rubber Buttpad with Spacer for 6 position tube M316................$19.99
Similar to the Magpul CTR, the ACS also features a supplemental friction lock system that minimizes wobble for enhanced weapon stability and accuracy MP370 Mil Spec.........$134.99 MP371 Commercial...$134.99
Improved ergonomics, vital storage capacity and Battle Ready toughness define Troys new Battle Ax M-4 butt stock. Advanced reinforced polymer ensures strength and durability. A comfortable cheek weld helps operators settle in quickly for rapid target acquisition. TI163..........$125.99
Sully Buttstock
Developed exclusively by DETC, this stock is shorter than standard stocks for people who require a shorter stock (for example, those who wear body armor). Stock kit contains: stock, butt plate, buffer tube, buffer and spring, sling mount & screws. S101............$119.99
Call us at 1-888-736-7725
50
Buttstock Accessories
Accu-Riser for M-4 Stocks
Accu-Riser Tactical cheek pads are the most secure and toughest tactical cheek pads on the market. This system of interchangable and removable pads make our tactical cheek pads to be the most versitile and adaptable on the market. The model CR-M4 pictured is comprised of a two piece base which when fitted together onto both the original CAR or newer M-4 style buttstocks, fits securely to the buttstock and forms a dove tail rail on which a separate cheek pad slides onto and locks in place, secureing the whole assembly to the buttstock. A screw and nut is supplied if it is desired to secure only the two base halves to the buttstock. Two heights of pads are included to custom fit the cheek pads height to your style weapon and optics mounted to your weapon. No tools are required to remove or install the pad. A push button mechanism allows the pad to be quickly installed or removed for use of open sights. Includes 3/4 Cheek pad. CRM4.............$29.99
Neoprene Accu-Riser
3/4 height pad fits both the CR-A2 and CR-M4 tactical cheek pads . Best suited for weapons with 2 to 2 1/2 center line of sight above the buttstock. 1 1/4 height pad fits both the CR-A2 and CRM4 Tactical cheek pads. 1 1/4 height is ideal for optics mounted on top of the carry handle model AR-15s or any weapon having a center line of sight 3 to 3/1/2 above the buttstock. No tools required. A push button mechanisum releases the pad to slide on and off the base. CRP.75................$14.99 CRP1.25..............$14.99
Ergonomic cheek rest with two storage compartments for the M-4 buttstock. Offers improved cheek weld for better head stability while aiming and shooting and faster target acquisition. Eliminates the typical head movement and fatigue associated with sighting in targets for extended periods. Contains two waterproof storage compartments and can hold up to six -123 batteries. CA111.............$19.99 Also available in Coyote Brown or OD Green. Specify OD Green (OD suffix), or Coyote Brown (CB suffix) when ordering.
Stock buttpads
These pads not only assist against recoil but also gives a sure grip to help prevent the butt of the rifle from slipping off of your shoulder. CAR Stock Pad SOG103....$14.99 M-4 Stock Pad SOG102......$19.99
Call us at 1-888-736-7725
51
AR-15 Accessories
Accu-Riser for A-2 Stocks
Accu-Riser Tactical cheek pads are the strongest, most secure tactical cheek pads on the market. Made of tuff ABS plastic finished to blend exactly as the black buttstocks on production weapons. This system of removeable and interchangable heights of pads make our cheek pads more versitile and adjustable to any weapon with optics mounted on them. The model CR-A2 pictured is a one piece base which is held to the buttstock with a 3M double sided tape and Military Spec. velcro strap combination which insures that the cheek pad will not move or be knocked off the buttstock. No tools are required to mount base to buttstock. The Accu-Riser tactical cheek pad model CR-A2 fits AR-15 A-2 style or similar sporter style buttstocks no wider than an AR-A2. This will not fit GI issue M-1 or M-14 wood stocks. Pads can also be ordered separately. CRA2.........................................$29.99
Neoprene Accu-Riser
This 3/8 neoprene cheek pad cushions the jaw and cheek from heavy recoil and also has some other benefits as well. It can be used on most rifles to correct an ill fitting gun with too low of a drop in the comb of the stock. The neoprene rubber back keeps the pad from moving while a 3 elastic and velcro strap hold it in place. A soft brushed black nylon top has a soft durable finish. CP5000.............$14.99
Sling Adapters
Call us at 1-888-736-7725
52
Sling Adapters
GG&G HK Hook Swivel Mounts KAC Sling Swivel & Adapter
Mounts with no modification to stock and allows push-button or QD sling swivels with stud provided in package. Includes Push-button swivel. KAC98723................$57.99
Because of the lack of an alternative method, most shooters have just clipped into a standard sling swivel. Although this works, it is noisy and provides a loose and sloppy sling attachment. GG&G has now developed a great lightweight and rugged alternative to clipping into the standard sling swivel. The New GG&G SLING THING FOR QUICK CLIPS is available in three fully ambidextrous configurations. These New GG&G SLING THINGS FOR QUICK CLIPS are manufactured from tough billet 7075 aluminum and hard-coat anodized in a non-reflective matte black finish to mil-spec. Made in America by individuals proud to be Americans. GG&G Quick Clip Sling Thing For Dovetails GGG1294........$34.99 GG&G Quick Clip Sling Thing For Front Sight GGG1295.........$31.99 GG&G Quick Clip Sling Thing Rear For Collapsible Stocks GGG1296.........$36.99
Tactical Slings attached to the M16/AR15 Carbine at a single mounting point, without the use of the front sling swivel, have become quite popular recently in both military and law enforcement special operations circles. These systems permit the operator to mount the weapon on either the primary or offside shoulder. A significant advantage of this set up is that expanding or collapsing the buttstock does not affect the sling length. If you wear body armor, a tactical vest or a jacket, you no longer need to re-adjust the sling length due to the extra apparel. The system uses two socket head screws for fastening, so that once tightened there is no chance the sling adapter will come loose. The Agency Rear Sling Adapter is manufactured for professional use from 7075 aluminum and Type III hard coat anodized to meet Mil-Specs. A 9/64 wrench is included for your convenience. Agency Sling Attachment-RH GGG1187.........................$31.99 Agency Sling Attachment-LH GGG1187L........................$31.99 Agency Sling Attachment-Ambi GGG1188......................$31.99 Agency Looped Attachment-Ambi GGG1189..................$31.99
Designed for any AR15 using an A1 or A2 solid buttstock, the Burnsed Loop provides an 1.25 near receiver sling loop for attaching a single point tactical sling. It is machined from 6061 T6 aluminum and finished in hard coat T3 mil-spec anodized black. Adds .275 to the length of the buttstock. Includes a stainless steel vented screw to accommodate the added length. A1 Burnsed Loop (Ambidextrous) DD24.....$29.99 A1 Burnsed Loop (Right Hand) DD23..........$29.99 A2 Burnsed Loop (Ambidextrous) DD28.....$29.99 A2 Burnsed Loop (Right Hand) DD27..........$29.99
This dual looped mount replaces the factory egg plate and allows sling attachment by a QD hook adapter. GRSC111.................$14.99
Call us at 1-888-736-7725
53
Sling Adapters
Troy Combo Sling Mount
The Combo Sling Mounts accept push button Q.D. swivels or web straps. Swivel not included. Black only. TI164....$27.99
The Troy 360 Rail mount is a low profile rock solid attachment for battlerails and sling mounts. Includes 360 degrees push button Q.D. swivel. Black Only TI170.....$32.99
CTASC07-1.................$29.99
Made for Right and Left handed operators, Vltor now offers an Ambidextrous Single Attachment Sling Endplate (SASE). These sling plates are a direct replacement to your existing receiver endplate. Two models are available: one accepts a 1 1/4-inch slings and the other accepts an HK-type hook/carabineer. Choosing the right or left hand placement is easy. Simply install the indexing washer and screw which interfaces with the rear of the receiver. HK Loop V151....................$19.99 1-1/4 Sling Slot V151........$19.99
Call us at 1-888-736-7725
54
Magazines
DSC 6.8 SPC Magazine
6.8 magazines for the AR15 - M16 family of weapons. Stainless Steel welded constructed body with guided Magpul anti-tilt follower, chrome silicone spring, and black mar-lube finish. 5 rd. 6.8 mag DS685...........$14.99 10 rd. 6.8 mag DS680.........$14.99 17 rd. 6.8 mag DS687.........$14.99 25 rd. 6.8 mag DS682.........$14.99
AR-15/M-16 Mags
These magazines feature a heavy duty spring for long life, mil-spec heat treated aluminum body, and high grade polymer components. 5 rd. New X1555..........$17.99 9 rd. New X1554..........$17.99
7.62x39 Magazines
Stainless Steel Black finish and Follower. 5 Round ????..........$11.99 10 Round ????........$11.99 30 Round ????........$16.99
Call us at 1-888-736-7725
55
Magazines
DSC Magazines
DoubleStar Corp. is pleased to offer their line of magazines. Made for DSC by military contractors to military specs, but we also offer them with some upgrades.
5 rd. Anti Tilt Follower, SS Spring DS105...................$12.99 10 rd. Anti Tilt Follower, SS Spring DS110..................$12.99 30 rd. Anti Tilt Follower, SS Spring DS132..................$12.99 Stainless Steel Magazines 20 rd. SS Straight DS125...............................................$12.99 30 rd. SS Anti Tilt Follower, SS Spring DS135.............$12.99 Add $3 per magazine to upgrade to Tactipul floor plate (add T suffix to the part number) Call for quantity pricing
Troy BattleMag
Feed lips and anti-tilt follower are reinforced for strength. A bolstered floor plate is set flush so that it will not catch on other magazines when pulled from a pouch. The Troy magazine is as sleek as it is strong. Operators will save crucial seconds when executing magazine changes. Individual.....$15.99 3 Pack..........$42.99
C Products 5.45 stainless steel, 30 round black finish, black follower 30 round 5.45 stainless steel magazine with black finish and black follower CP150....$12.99
C Products 5.56/.223 40 round stainless steel magazine, orange follower 40 round stainless steel magazine with orange follower, black finish and robotically welded. CP151.....$14.99
C Products .308 stainless steel SR-25, 10 round, black finish & follower
10 round .308 stainless steel SR-25 magazine, black finish, black follower and robotically welded. CP152.....$15.99
C Products .308 stainless steel SR-25, 20 round, black finish & follower
20 round .308 stainless steel SR-25 magazine, black finish, black follower and robotically welded. CP153.....$15.99
Magpul P Mag
The Polymer Magazine (PMAG) is a lightweight 5.56 NATO, M-16 compatible magazine. The PMAG features a pop-off storage/dust cover that alleviates pressure from the magazine feed lips, allowing for storage of loaded magazines without risk of feed lip creep that often causes malfunction in standard aluminum magazines. PMAG utilizes a resilient stainless steel spring for corrosion resistance. Black. Lancer L5 Translucent Magazine 20 rd. P-mag MP020........................$13.99 The L5 is a translucent 30 round magazine developed for the 30 rd. P-mag MP029........................$14.99 5.56mmM16/M4/AR15 rifle. It has an impact resistant trans30 rd. windowed P-mag MP030......$17.99 lucent polymer body, corrosion resistant steel feed lips and a Also available in Flat Dark Earth or Foliage Green. removable, patent pending, rubber coated bottom. The L5 was designed to be used with the existing magazine pouches and Specify Flat Dark Earth (DE suffix) carriers. or Foliage Green (FC suffix)) when ordering.
30 rd. New L530......................$19.99
Call us at 1-888-736-7725
56
Magazine Accessories
Ace MAGE
Allows any mil. spec. 30 round magazine to hold 35 rounds, or you can leave 30 rounds loaded in the magazine with out fear of the spring setting. Two holes in the bottom of the magazine extension allow for drainage and to attach 550 cord loop to aid in handling magazines. The operator can also use color coded zip ties to designate type of ammo in that magazine. The MAGE can be removed for cleaning in the field by using a bullet tip to remove the stainless steel retaining clip. Zip tie and 550 cord is not included. MAGE A170...........$4.99
Available in Black, Coyote Brown or OD Green. Specify Black (B suffix), OD Green (OD suffix), or Coyote Brown (CB suffix) when ordering.
Magpuls
The Magpul is a thermoplastic loop installed on the base of most magazines. Through this loop and recessed rough gripping surface, it provides unsurpassed speed and controlability during high stress, tactical magazine changes. 5.56 3 Pack MP113.............$9.99 5.56 7 Pack MP117...........$19.99 5.56 12 Pack MP118.........$29.99 .308 3 Pack MP213.............$9.99 .308 7 Pack MP217...........$19.99 .308 12 Pack MP218.........$29.99 Subgun 3 Pack MP413.......$9.99 Subgun 7 Pack MP417.....$19.99 Subgun 12 Pack MP418...$29.99
Scope Mounts/Risers
DSC Riser Block
Machined aluminum riser positions electronic & optical sights right at eye level without using extra-high rings. Dual thumb screws and full length locking bar clamp solidly to receiver and help maintain zero during rugged field use. 3/8 diameter full length tunnel reduces weight to give faster handling and easier carry. Picattinny base accepts Weaver-style rings and mounts. AR761...............$44.99
Call us at 1-888-736-7725
57
Scope Rings
Badger Ordinance SCOPE RINGS SIZING CHART
Part # BO30608 BO30609 BO30610 BO30611 BO30613 BO30614 BO30616 BO30617 BO30618 Size Standard High Ultra High MAX-50 Standard MAX-50 High 34mm dia. S&B Standard Alloy High Alloy Ultra High Alloy A 0.823 1.125 1.400 0.823 1.125 1.000 0.823 1.125 1.400 B .232 .483 .809 .232 .483 .330 .232 .483 .809 Weight 7.3 oz. 9.5 oz. 10.7 oz. 11.3 oz. 15.2 oz. 8.6 oz. 3.9 oz. 4.6 oz. 5.1 oz. Part # BO30619 BO30620 BO30621 BO30624 BO30627 BO30628 BO30629 BO30650 BO30651 A 0.823 0.885 1.000 0.886 1.275 1.031 1.250 1.450 1.450 B Weight .232 5.5 oz. .294 7.8 oz. .414 8.7 oz. .293 8.9 oz. .605 4.1 oz. .440 12.0 oz. .659 4.3 oz. .859 17.5 oz. .859 8.5 oz.
Badger Ordnance Maximized Scope Ring Standard Height Height 0.823, diameter 30mm BO30608.......................$162.99 BO30616 MAX-Alloy.....$162.99
Badger Ordnance Maximized Scope Ring High Height Height 1.125, diameter 30mm BO30609.......................$165.99 BO30617 MAX-Alloy.....$165.99
Badger Ordnance Maximized Scope Ring Ultra High Height Height 1.400, diameter 30mm BO30610.......................$167.99 BO30618 MAX-Alloy.....$167.99
Badger Ordnance Maximized Scope Ring Alloy For AR Series Rifles. Height 1.275, diameter 34mm BO30627..................$197.99
Badger Ordnance Max 50 Scope Ring Standard Height Height 0.823, diameter 30mm BO30611.................$172.99
Badger Ordnance Max 50 Scope Ring High Height Height 1.125, diameter 30mm BO30613...................$174.99
Badger Ordnance Max 50 Scope Ring Ultra High Height Height 1.450, diameter 30mm BO30650.....................$177.99 BO30651 MAX-Alloy....$197.99
Badger Ordnance Maximized Scope Ring Alloy for Schmidt and Bender Height 1.00, diameter 34mm BO30627.................$197.99
Badger Ordnance Scope Ring USN EBR Alloy Height 1.250, diameter 30mm BO30629..............$177.99
Badger Ordnance Scope Ring USMC M40A3 Height 0.823, diameter 30mm w/ 1 Inserts. BO30624........$209.99
Badger Ordnance Scope Ring USMC DMR Height 1.031, dia. 30mm BO30628............$199.99
Badger Ord. Ring Reducer Reduces ring from 30mm to 1. BO30612........................$36.99 For Max 50 Rings BO30615........................$44.99
Call us at 1-888-736-7725
58
EOTech Holosights
EOTech HOLOgraphic Weapon Sights
The Model Eotech 550 HOLOgraphic Weapon Sight (HWS) is fully compatible with all generation levels of night vision intensifier tubes. A special night vision (NV) setting allows the operator to immediately drop the brightness intensity of the holographic reticle to eliminate any halo effect while viewing through an image intensifier tube. The M550 can be positioned in tandem behind night vision intensifiers without any bloom of the target area. Now, operators can combine the proven night vision technological advantage with a superior close quarters weapon optic to achieve greatly enhanced weapon aiming - in complete darkness. The holographic patterns have been designed to be instantly visible in any light, instinctive to center regardless of shooting angle, and to remain in view while sweeping the engagement zone. Reticles of EOTech HOLOgraphic Weapon Sights are designed as large, see-through patterns to achieve lightning quick reticle to target acquisition without covering or obscuring the point of aim. The Holographic Weapon Sight (HWS) employs a true Heads-Up Display that eliminates blind spots, constricted vision, or the tunnel vision associated with tubed sights. All user controls are flush to the Holographic Weapon Sights streamline housing with no protruding knobs, battery compartments or mounting rings blocking vision at the target area. True, 2 eyes open shooting is realized with EOTech HWS. Instant threat identification is achieved by maximizing the operators peripheral vision and ultimately gaining greater control of the engagement zone.
EOTech 512
The Model 512 is the most popular model HWS. This tactical optic is perfect for agencies that want the best in CQB speed and versatility, without the need for night vision compatibility. EO512.......$429.99
EOTech 516
The EOTech 516 is the ideal all purpose optic for Law Enforcement applications especially when partnered with an EOTech magnifier. This 516 HWS operates on the same CR123 lithium batteries commonly utilized by the leading gear manufacturers. When it matters most, the combination of speed, versitility and extended battery life will make you an unstoppable force. EO516......$479.99
EOTech 517
The 517.A65 was developed to optimize the functionality of the HWS. The buttons have been moved from the back to the left side for instant access, allowing a magnifier or a back up iron sight to fit closely to the HWS body. This new button position allows the user to operate the HWS function switches easier than ever before. Additionally, a portion of the front base has been raised to allow the sight to fit over standard handguards found on many M-4 or M-16 style weapons. EO517.....$449.99
EOTech 551
A lighter, smaller version of the Model 552, the Model 551 offers the same durability and function, but in a more compact unit. At 4 inches in length, this sight takes up less valuable rail space, leaving more room for a rear iron sight or NV mount. EO551......$399.99
EOTech 552
Standardized by the DEA, ATF, and FBI SWAT, the Model 552 is by far the most popular HWS model. This NV compatible, AA battery model is the sight of choice by military units like Stryker Brigade, 10th Mountain, and 3rd Infantry. It is battle proven to withstand the abuse that any harsh environment, high powered weapon platform, or military mission can dish out. EO552......$509.99
EOTech 553
After extensive testing of various optical sights, US Special Operations Command has standardized on the HWS as its 1X weapon optic for close quarter, urban combat zones. To meet the stringent requirements set and demanded by our elite fighting forces, L-3 EOTech has developed the SU-231/PEQ (Model 553), modeled after the ever popular, battle proven HWS design.The SU-231/PEQ (Model 553) incorporates many additional features required within the SOPMOD Block 2 program. EO553......$659.99
EOTech 552XR308
Standardized by the DEA, ATF, and FBI SWAT, the Model 552 is by far the most popular HWS model. This NV compatible, AA battery model is the sight of choice by military units like Stryker Brigade, 10th Mountain, and 3rd Infantry. It is battle proven to withstand the abuse that any harsh environment, high powered weapon platform, or military mission can dish out. EO552308.......$559.99
EOTech 556
The EOTech 556 is the ideal all purpose optic for Law Enforcement applications especially when partnered with an EOTech magnifier. This 556 night vision compatible HWS operates on the same CR123 lithium batteries commonly utilized by the leading gear manufacturers. When it matters most, the combination of speed, versitility and extended battery life will make you an unstoppable force. EO556.......$569.99
Call us at 1-888-736-7725
59
EOTech Holosights
EOTech XPS2
Shortest model sight yet! This sight is smaller than the former N-cell battery sight (511/551) and runs on a single 123 battery. It also has a longer battery life than the N-cell style sights. With the new single battery configuration, the XPS allows more rail space than ever, leaving more room for rear iron sights or magnification. Smaller, lighter and always fast; the XPS series is a great new additon. EOXPS2......$479.99
Call us at 1-888-736-7725
60
EOTech Holosights
GG&G MULTI-FLEX MOUNTING SYSTEM
Aimpoint has recently introduced to the market a 3X magnifier that can be used in conjunction with all Aimpoint scopes for long range aiming. When coupled with the GG&G Quick Detach 3X Adapter and QD Multi-Flex Mount it can be removed in seconds for CQB situations or installation of the ITT PVS-14 Night Vision Monocular for night targeting. The GG&G Quick Detach Multi-Flex System also allows the Aimpoint 3X to be used affectively behind the EOTECH Holosight. When not mounted, this new 3X magnifier can also be used as a hand held observation device. The magnifier does not have a reticle of its own but uses the red dot or reticle in the Aimpoint or EOTECH as the aiming reticle. This eliminates the need to re-zero when shifting from non-magnified to magnified use or vice versa. This great new product is rubber covered for increased protection from shock as well as providing an ergonomic grip when used as a hand held monocular. The magnifier is manufactured from a 30 mm diameter tube and provides a 7 degree field of view. It is only 4.3 long and weighs only 7.1 ounces. Multi-Flex Base GGG1016B........................$152.99 ITT PVS14 Mounting Ring GGG1016R..........$74.99 Aimpoint 3X Adapter Plate GGG1233............$33.99
Aimpoint
Aimpoint Comp M4
The CompM4 is now the latest version of the US Armys M68 CCO (Close-Combat Optic), continuing a legacy that Aimpoint has maintained since 1997. The CompM4 is the finest sight that Aimpoint has ever produced. Improvements include improved energy efficiency that provides up to 8 years of continuous use from a single AA battery! The CompM4 incorporates an integral mount that eliminates the need for a separate ring, and can be customized with vertical and forward spacers to fit a variety of weapon systems. The Comp M4 can also be used by hunters and sport shooters that need night vision compatibility. Compatible with every generation of Night Vision Devices (NVD) - Super ACET technology allows up to 80,000 hours (over 8 years) of daytime operation on one AA battery - Internal voltage regulator allows the CompM4 to be used with any AA size battery. - Seven night vision compatible settings and 9 daylight settings. - QRP2 mount has twice the clamping force of the original QRP, and the mounting knob is wider and shorter to improve operation, and lessen the chance of becoming snagged on other gear. - Mount base is keyed into to the body of the sight to absorb recoil. - Mount base screws directly into the sight no separate sight ring is required. - 500,000 hours of use on NVD setting - 2 MOA dot for close combat and long distance engagement - Unequalled light transmission. - Front lens opening is threaded for addition of killFlash anti-reflective device. - Submersible to 150 feet (45 meters) - Vertical spacer included - Standardized as the US Armys new M68CCO - Improved adjustment caps are easier to remove, and are protected against impact. Comp M4 AIM11972.................$728.99
Aimpoint CompML2
The Aimpoint CompML2 is a day sight and is therefore not compatible with Night Vision Devices (NVD). For night vision compatiability, look for the CompM2 model instead. In all other aspects, the Aimpoint CompML2 and the Aimpoint CompM2 are identical. The Aimpoint Comp M2 is compatible with every generation of NVD. CET technology allows up to 10,000 hours of daytime operation on one battery & 100,000 hours of use on NVD setting. Unequalled light transmission Submersible to 75 feet (25 meters) Standard CQB sight for Special Forces worldwide CompM2 M68/CCO is the standard sight for U.S. Army and U.S. Air Force Comp M2 AIM10336........................$477.99 Comp ML2 AIM10338......................$427.99 Comp ML2 2X AIM10583.................$557.99
Call us at 1-888-736-7725
61
Aimpoint
Aimpoint 3X Magnifier
The 3XMag magnifying module is specially designed for compatibility with Aimpoint sights and for maximum flexibility and increased performance in the field. The 3XMag is a revolutionary tool for military personnel, law enforcement, sport shooters and hunters. The versatile 3XMag also can be used as a handheld magnifying glass monocular for discrete observation and identification. Water resistant to 20 meters (67 feet). Does not Standard features for all Aimpoint sights influence point of impact. Rubber coated for durability. * Unlimited field of view 3x Magnifier. * Parallax-free and unlimited eye relief AIM11342...........$519.99 * Unaffected by extreme weather conditions * Rugged, durable construction * No hazardous materials * No laser emission that could be harmful to your eyes * Mechanical switch for speed and reliability * Increased aiming confidence
Tactical Slings
Troy Industries Sling
This simple loop sling has a leather pad to help ease the fatigue associated with carrying a slung weapon over long periods of time. Attaches to a single loop point with a steel QD clip. Black TI116......................$35.99 Troy 2 pt. Battle Slings TI1162..............................$38.99
Anaconda Sling
Blue Force Gears version of the bungee sling was developed for use primarily with short breaching shotguns. This unique single point sling keeps your shotgun close and instantly available to work on door bolts. Unlike other bungee slings made with cord or tubing, this sling is wide enough to prevent rolling and digging in. Composed of Heavy Duty 2 elastic sewn by Americans with #138 bonded nylon thread, the Anaconda SlingTM is adjustable and ambidextrous. Works with all of the modular SOC-C Female adapters and includes your choice of hook or strap connector. Hook connector, Black BF161......$39.99 Strap connector, Black BF166......$39.99
Call us at 1-888-736-7725
62
Tactical Slings
SOC-CTM Push Button Adapter
This adapter allows our SOC-C Sling and Vest/LCE strap to connect to weapons equipped with push button sling points such as those found on Vltor buttstocks. Complete with Heavy Duty Push Button swivel with Mil-Spec Finish. Black BF136...........$22.99
This adapter allows the SOC-C Sling and Vest/ LCE strap to connect to HK weapons and others using eyelets or ring type sling attachment points. Black BF133........$12.99 A section of heavy duty elastic cord is attached near the mounting clip. The elastic allows the weapon to be carried close to the body and still maintain the ability to quickly shoulder the weapon when needed. Black Sling Only DS302......$39.99 DS301......$59.99
Bungee Sling
Driven by the operational experience of Magpul DynamicsSM instructors, the MS2 Multi-Mission Sling System was designed to give a versatile weapon-retention solution for a multitude of tactical environments and missions. MP503.....$49.99
Tools
J&T Armorers Barrel Wrench
Install and disassemble barrel nut, free float tubes, compensator, barrel extension tube, and carbine stock. 1/2 drive for socket wrench and screw driver tip for buttstock screw. Convenient hole for wall hanging made of 4140 steel, with a rugged powder coat finish. AR757...................$39.99
Call us at 1-888-736-7725
63
Tools
Lower Receiver Block
Heavy-duty urethane block takes all the vise clamping force so your valuable lower receiver doesnt. Versatile block can be inserted into the magazine housing, either from the top or bottom; then clamp the other end into your bench vise. The magazine catch locks to the block; safely and securely holds the rifle in the required position for assembly, disassembly, cleaning or repair. Will not mark or scratch finish. AR758....................$14.99
HG Removal Tool
Our new handguard removal tool (HRT) will make removing your handguards a snap!!! Our improved version works on the gun or just the upper receiver thanks to the longer tang on the tool.
GT105....$22.99
Brass Management
Brass Deflector
These CMP legal brass deflectors attach quickly to A-2, flattop, or detachable carrying handles for proper range etiquette. Does not require modification of your upper. A-2 Model TC101...............................$19.99 Detachable Handle Model TC102.....$19.99 Flattop Model TC103.........................$19.99
Brass Catcher
Easily attaches to the any AR15 style weapon and places heavy duty nylon netting over your brass deflector to catch empty shell casings. AR774.... $17.99
Call us at 1-888-736-7725
64
An ACE Folding Stock is assembled using these three ACE modular components: 1) Receiver Block 2) Folding Mechanism 3) Modular Stock. An ACE Fixed Stock is assembled using these two ACE modular components: 1) Receiver Block 2) Modular Stock All of the ACE Modular Stocks listed on this section are designed to be installed on any ACE Receiver Block or any ACE Folding Mechanism. The Receiver Block is the part of our stock that is attaches directly to a specific weapons receiver or frame. When ACE Modular Stocks are installed directly to the Receiver Block it is called a Fixed Stock and will not side fold. When the ACE Modular Stock is attached to the Folding Mechanism it is called a Side Folding Stock. A side folding stock can be set up to fold to the left or right, depending on how the pivot pin is positioned before it is installed on the receiver block. If you want to purchase an ACE modular stock, first go to the Receiver Blocks section and select the appropriate Receiver Block to fit your weapon. Next, return to the Modular Stock section and select the folding or fixed stock that best suits your needs and taste.
Call us at 1-888-736-7725
65
Hammer
These modular stocks will fit on any receiver block and folding mechanism that Ace offers. UL-M Ultra Light Stock A310....................................$64.99 M4M M-4 Stock A311.................................................$64.99 M4S (M) M-4 SOCOM Stock A312...........................$184.99 M4S (L) M-4 SOCOM Stock (L) A313......................$194.99
Includes a Folding Mechanism (FSM) and your choice of buttstock. For use with all Ace receiver blocks. UL-M-FS Ultra Light Stock A300..........................$124.99 M4M-FS M-4 Stock A301......................................$124.99 M4S(M)-FS M-4 SOCOM Stock A302...................$244.99 M4S(M)-FS-L M-4 SOCOM Stock (L) A303..........$254.99 HMR(M)-FS Hammer Stock A304.........................$324.99
Modification to receiver is necessary. The stock support must be cut down to approximately .450 then the AR180BB securely installs with one screw. Includes all parts and hardware to attach stock to your weapon. Fixed Stock Versions Fixed Stock Version AR180RB-ULM Ultra Light Stock A380F....................$109.99 AR180RB-FX(L) Skeleton Stock (9.5) A381F...........$109.99 AR180RB-FX(S) Skeleton Stock (8.5) A382F...........$109.99 AR180RB-FX(SS) Skeleton Stock (7.5) A383F.........$109.99 AR180RB-M4M M-4 Stock A384F................................$109.99 AR180RB-M4S M-4 SOCOM Stock A385F..................$224.99 AR180RB-M4S(L) M-4 SOCOM Stock (L) A386F........$234.99 AR180RB-HMR(M) Hammer Stock A387F..................$309.99 Folding Stock Versions (Includes FSM) AR180RB-UL-M-FS Ultra Light Stock A380...............$164.99 AR180RB-FX(L)-FS Skeleton Stock (9.5) A381.......$164.99 AR180RB-FX(S)-FS Skeleton Stock (8.5) A382.......$164.99 AR180RB-FX(SS)-FS Skeleton Stock (7.5) A383.....$164.99 AR180RB-M4M-FS M-4 Stock A384............................$164.99 AR180RB-M4S-FS M-4 SOCOM Stock A385..............$284.99 AR180RB-M4S-FS(L) M-4 SOCOM Stock (L) A386....$294.99 AR180RB-HMR(M)-FS Hammer Stock A387..............$364.99
Call us at 1-888-736-7725
66
ACEs famous AKFX folding skeleton stock. Includes all parts and hardware to mount it to your stamped AK. For all common stamped receiver AKs. Such as Chinese Type 56 and MAK 90 (square cut receivers only), Romanian SAR, Hungarian, Russian/ Siaga, Egyptian Maadi. Includes all parts and hardware to attach stock to your weapon. Fixed Stock Versions AKRBU-ULM Ultra Light Stock A430F........................$109.99 AKRBU-FX(L) Skeleton Stock (9.5) A431F..............$109.99 AKRBU-FX(S) Skeleton Stock (8.5) A432F...............$109.99 AKRBU-FX(SS) Skeleton Stock (7.5) A433F............$109.99 AKRBU-M4M M-4 Stock A434F...................................$109.99 AKRBU-M4S M-4 SOCOM Stock A435F...................$224.99 AKRBU-M4S(L) M-4 SOCOM Stock (L) A436F...........$234.99 AKRBU-HMR(M) Hammer Stock A437F......................$309.99 Folding Stock Versions (Includes FSM) FAI-UL-M-FS Ultra Light Stock A430..........................$164.99 AKRBU-FX(L)-FS Skeleton Stock (9.5) A431..........$164.99 AKRBU-FX(S)-FS Skeleton Stock (8.5) A432...........$164.99 AKRBU-FX(SS)-FS Skeleton Stock (7.5) A433.........$164.99 AKRBU-M4M-FS M-4 Stock A434................................$164.99 AKRBU-M4S-FS M-4 SOCOM Stock A435..................$284.99 AKRBU-M4S-FS(L) M-4 SOCOM Stock (L) A436........$294.99 AKRBU-HMR(M)-FS Hammer Stock A437..................$364.99
These stocks require modification to your AK (receiver tang must be removed and ground smooth. The internal receiver block will then simply bolt into the receiver. It will be connected at the stock screw hole on the inside of the receiver and the pistol grip T nut will hold the front of the receiver block. There is no movement to the receiver block once installed. Fits most common stamped receivers, 1mm and 1.6mm.
For all Bulgarian milled receivers and pre-ban milled receivers with the lower tang removed. Includes all parts and hardware to attach
For all common milled receiver, (Including Bulgarian, Arsenal, and Chinese). Modification of receiver is necessary, both upper and lower tangs need to be removed. Includes all parts and hardware to
Fixed Stock Versions AKRBB-ULM Ultra Light Stock A450F.......................$109.99 AKRBB-FX(L) Skeleton Stock (9.5) A451F.............$104.99 AKRBB-FX(S) Skeleton Stock (8.5) A452F..............$104.99 AKRBB-FX(SS) Skeleton Stock (7.5) A453F............$104.99 AKRBB-M4M M-4 Stock A454F...................................$104.99 AKRBB-M4S M-4 SOCOM Stock A455F.....................$224.99 AKRBB-M4S(L) M-4 SOCOM Stock (L) A456F...........$234.99 AKRBB-HMR(M) Hammer Stock A457F......................$309.99 Folding Stock Versions (Includes FSM) AKRBB-UL-M-FS Ultra Light Stock A450...................$164.99 AKRBB-FX(L)-FS Skeleton Stock (9.5) A451...........$164.99 AKRBB-FX(S)-FS Skeleton Stock (8.5) A452...........$164.99 AKRBB-FX(SS)-FS Skeleton Stock (7.5) A453.........$164.99 AKRBB-M4M-FS M-4 Stock A454................................$164.99 AKRBB-M4S-FS M-4 SOCOM Stock A455..................$284.99 AKRBB-M4S-FS(L) M-4 SOCOM Stock (L) A456........$294.99 AKRBB-HMR(M)-FS Hammer Stock A457........................$364.99
Fixed Stock Versions AKRBMC-ULM Ultra Light Stock A420F......................$109.99 AKRBMC-FX(L) Skeleton Stock (9.5) A421F............$104.99 AKRBMC-FX(S) Skeleton Stock (8.5) A422F.............$104.99 AKRBMC-FX(SS) Skeleton Stock (7.5) A423F..........$104.99 AKRBMC-M4M M-4 Stock A424F.................................$104.99 AKRBMC-M4S M-4 SOCOM Stock A425F...................$199.99 AKRBMC-M4S(L) M-4 SOCOM Stock (L) A426F.........$209.99 AKRBMC-HMR(M) Hammer Stock A427F...................$309.99 Folding Stock Versions (Includes FSM) AKRBMC-UL-M-FS Ultra Light Stock A420................$164.99 AKRBMC-FX(L)-FS Skeleton Stock (9.5) A421........$164.99 AKRBMC-FX(S)-FS Skeleton Stock (8.5) A422.........$164.99 AKRBMC-FX(SS)-FS Skeleton Stock (7.5) A423......$164.99 AKRBMC-M4M-FS M-4 Stock A424.............................$164.99 AKRBMC-M4S-FS M-4 SOCOM Stock A425...............$284.99 AKRBMC-M4S-FS(L) M-4 SOCOM Stock (L) A426.....$294.99 AKRBMC-HMR(M)-FS Hammer Stock A427.....................$364.99
Call us at 1-888-736-7725
67
US made Saiga rifle and shotgun stock set. No modifications to your weapon are required. Will clear most optical sights mounted to the Saigas scope rail. Includes all parts and hardware to attach
Yugoslavian AK Stock Adapter Block. Fits Mitchell arms M70 and M90, as well as all other Yugo AKs with the original no tang stock interface.
Fixed Stock Version AKRBS-ULM Ultra Light Stock A460F........................$129.99 AKRBS-FX(L) Skeleton Stock (9.5) A461F..............$129.99 AKRBS-FX(S) Skeleton Stock (8.5) A462F...............$129.99 AKRBS-FX(SS) Skeleton Stock (7.5) A463F.............$129.99 AKRBS-M4M M-4 Stock A464F...................................$129.99 AKRBS-M4S M-4 SOCOM Stock A465F.....................$269.99 AKRBS-M4S(L) M-4 SOCOM Stock (L) A466F...........$279.99 AKRBS-HMR(M) Hammer Stock A467F......................$329.99 Folding Stock Versions (Includes FSM) AKRBS-UL-M-FS Ultra Light Stock A460...................$184.99 AKRBS-FX(L)-FS Skeleton Stock (9.5) A461..........$184.99 AKRBS-FX(S)-FS Skeleton Stock (8.5) A462...........$184.99 AKRBS-FX(SS)-FS Skeleton Stock (7.5) A463.........$184.99 AKRBS-M4M-FS M-4 Stock A464................................$184.99 AKRBS-M4S-FS M-4 SOCOM Stock A465..................$304.99 AKRBS-M4S-FS(L) M-4 SOCOM Stock (L) A466........$314.99 AKRBS-HMR(M)-FS Hammer Stock A467........................$384.99
An ACE Exclusive! These VEPR receiver blocks have clearance machined in to it to fit the Krebs customized VEPRs (KTR). Will not fit early wooden thumb hole type VEPRs. This receiver block extends 1/8 (.125) from the back edge of receiver. Note: you must cut off the tang on the receiver to install this receiver block. Includes all parts
No modifications to your weapon are required. Includes US made parts to comply with Section 922(r). Includes all parts and hardFixed Stock Version DRUSF-ULM Ultra Light Stock A360F.........................$149.99 DRUSF-FX(L) Skeleton Stock (9.5) A361F................$149.99 DRUSF-FX(S) Skeleton Stock (8.5) A362F................$149.99 DRUSF-FX(SS) Skeleton Stock (7.5) A363F..............$149.99 DRUSF-M4M M-4 Stock A364F.....................................$149.99 DRUSF-M4S M-4 SOCOM Stock A365F.......................$269.99 DRUSF-M4S(L) M-4 SOCOM Stock (L) A366F.............$279.99 DRUSF-HMR(M) Hammer Stock A367F........................$349.99 Folding Stock Versions (Includes FSM) DRUSF-UL-M-FS Ultra Light Stock A360....................$209.99 DRUSF-FX(L)-FS Skeleton Stock (9.5) A361............$209.99 DRUSF-FX(S)-FS Skeleton Stock (8.5) A362............$209.99 DRUSF-FX(SS)-FS Skeleton Stock (7.5) A363..........$209.99 DRUSF-M4M-FS M-4 Stock A364.................................$209.99 DRUSF-M4S-FS M-4 SOCOM Stock A365...................$319.99 DRUSF-M4S-FS(L) M-4 SOCOM Stock (L) A366.........$329.99 DRUSF-HMR(M)-FS Hammer Stock A367....................$409.99
Fixed Stock Versions AKRBV-ULM Ultra Light Stock A470F........................$109.99 AKRBV-FX(L) Skeleton Stock (9.5) A471F..............$104.99 AKRBV-FX(S) Skeleton Stock (8.5) A472F...............$104.99 AKRBV-FX(SS) Skeleton Stock (7.5) A473F.............$104.99 AKRBV-M4M M-4 Stock A474F....................................$104.99 AKRBV-M4S M-4 SOCOM Stock A475F......................$224.99 AKRBV-M4S(L) M-4 SOCOM Stock (L) A476F............$234.99 AKRBV-HMR(M) Hammer Stock A477F.......................$309.99 Folding Stock Versions (Includes FSM) AKRBV-UL-M-FS Ultra Light Stock A470...................$164.99 AKRBV-FX(L)-FS Skeleton Stock (9.5) A471...........$164.99 AKRBV-FX(S)-FS Skeleton Stock (8.5) A472............$164.99 AKRBV-FX(SS)-FS Skeleton Stock (7.5) A473.........$164.99 AKRBV-M4M-FS M-4 Stock A474................................$164.99 AKRBV-M4S-FS M-4 SOCOM Stock A475..................$284.99 AKRBV-M4S-FS(L) M-4 SOCOM Stock (L) A476........$294.99 AKRBV-HMR(M)-FS Hammer Stock A477...................$364.99
Call us at 1-888-736-7725
68
Includes: AR receiver block (ARRB). Must use alternate recoil system like ZM LR3000 or .22 LR converstions. No modification to receiver is necessary. Also fits shotgun receiver blocks and SIG 556. Includes all parts and hardware to attach stock to your weapon. ARRB-UL-M-FS Ultra Light Stock A320...................$154.99 ARRB-FX(L)-FS Skeleton Stock (9.5) A321...........$154.99 ARRB-FX(S)-FS Skeleton Stock (8.5) A322............$154.99 ARRB-FX(SS)-FS Skeleton Stock (7.5) A323.........$154.99 ARRB-M4M-FS M-4 Stock A324................................$149.99 ARRB-M4S-FS M-4 SOCOM Stock A325..................$274.99 ARRB-M4S-FS(L) M-4 SOCOM Stock (L) A326........$284.99 ARRB-HMR(M)-FS Hammer Stock A327..................$354.99
Includes: Compact AR receiver block (ARRB-C). Must use alternate recoil system like ZM LR3000 or .22 LR converstions. No modification to receiver is necessary. Also fits shotgun receiver blocks and SIG 556. Includes all parts and hardware to attach stock to your weapon. ARRB-C-UL-M-FS Ultra Light Stock A330...............$154.99 ARRB-C-FX(L)-FS Skeleton Stock (9.5) A331.......$154.99 ARRB-C-FX(S)-FS Skeleton Stock (8.5) A332........$154.99 ARRB-C-FX(SS)-FS Skeleton Stock (7.5) A333......$154.99 ARRB-C-M4M-FS M-4 Stock A334.............................$149.99 ARRB-C-M4S-FS M-4 SOCOM Stock A335...............$274.99 ARRB-C-M4S-FS(L) M-4 SOCOM Stock (L) A336.....$284.99 ARRB-C-HMR(M)-FS Hammer Stock A337...............$354.99
Attaches to all common metric lower receivers with out modification. Looks best on FN and Imbel lowers. ACE FALRB requires the use of a para recoil system (bolt carrier, spring and action cover/spring guide) not included. Fixed Stock Versions FALRB-ULM Ultra Light Stock A930F........................$109.99 FALRB-FX(L) Skeleton Stock (9.5) A391F..............$109.99 FALRB-FX(S) Skeleton Stock (8.5) A392F...............$109.99 FALRB-FX(SS) Skeleton Stock (7.5) A393F............$109.99 FALRB-M4M M-4 Stock A394F...................................$109.99 FALRB-M4S M-4 SOCOM Stock A395F.....................$224.99 FALRB-M4S(L) M-4 SOCOM Stock (L) A396F...........$234.99 FALRB-HMR(M) Hammer Stock A397F......................$309.99 Folding Stock Versions (Includes FSM) FALRB-UL-M-FS Ultra Light Stock A390...................$164.99 FALRB-FX(L)-FS Skeleton Stock (9.5) A391..........$164.99 FALRB-FX(S)-FS Skeleton Stock (8.5) A392...........$164.99 FALRB-FX(SS)-FS Skeleton Stock (7.5) A393.........$164.99 FALRB-M4M-FS M-4 Stock A394................................$164.99 FALRB-M4S-FS M-4 SOCOM Stock A395..................$284.99 FALRB-M4S-FS(L) M-4 SOCOM Stock (L) A396........$294.99 FALRB-HMR(M)-FS Hammer Stock A397..................$364.99
Fits most common HK variants. No modification to your weapon are required. Includes all parts and hardware to attach stock to your
weapon.
Fixed Stock Version HK91RB-ULM Ultra Light Stock A400F......................$109.99 HK91RB-FX(L) Skeleton Stock (9.5) A401F............$109.99 HK91RB-FX(S) Skeleton Stock (8.5) A402F.............$109.99 HK91RB-FX(SS) Skeleton Stock (7.5) A403F...........$109.99 HK91RB-M4M M-4 Stock A404F..................................$109.99 HK91RB-M4S M-4 SOCOM Stock A405F....................$224.99 HK91RB-M4S(L) M-4 SOCOM Stock (L) A406F..........$234.99 HK91RB-HMR(M) Hammer Stock A407F.....................$309.99 Folding Stock Versions (Includes FSM) HK91RB-UL-M-FS Ultra Light Stock A400.................$164.99 HK91RB-FX(L)-FS Skeleton Stock (9.5) A401.........$164.99 HK91RB-FX(S)-FS Skeleton Stock (8.5) A402..........$164.99 HK91RB-FX(SS)-FS Skeleton Stock (7.5) A403........$164.99 HK91RB-M4M-FS M-4 Stock A404...............................$164.99 HK91RB-M4S-FS M-4 SOCOM Stock A405.................$284.99 HK91RB-M4S-FS(L) M-4 SOCOM Stock (L) A406.......$294.99 HK91RB-HMR(M)-FS Hammer Stock A407..................$364.99
Call us at 1-888-736-7725
69
For all Bulgarian milled receivers and pre-ban milled receivers with the lower tang removed. Includes 1 1/4 sling mount. 1.480 length or receiver block extending from back edge of receiver Weight 190g (6.8 oz) AKRBB A543....................$44.99
Ace Saiga Rifle and Shotgun Receiver Block, Grip and Sling Mount
US made. No modifications required to your weapon. For SAIGA rifles and shotguns that have not had the fire control group moved forward. Includes receiver block, pistol grip and all needed hardware to install. Also includes 1 1/4 sling swivel
SAIGARB A505..........$64.99
Call us at 1-888-736-7725
70
HK 93 Receiver Block. Length .500. 1 1/4 sling swivel. Weight 140g ( 5 oz) HKRB93 A593.............$44.99
Call us at 1-888-736-7725
71
Stock assy. also available in Coyote Brown and OD Green. Specify OD Green (OD suffix) or Coyote Brown (CB suffix) when ordering.
Ace MAGE
Allows any mil. spec. 30 round magazine to hold 35 rounds, or you can leave 30 rounds loaded in the magazine with out fear of the spring setting. Two holes in the bottom of the magazine extension allow for drainage and to attach 550 cord loop to aid in handling magazines. The operator can also use color coded zip ties to designate type of ammo in that magazine. The MAGE can be removed for cleaning in the field by using a bullet tip to remove the stainless steel retaining clip. Zip tie and 550 cord is not included. MAGE A170...........$4.99
Call us at 1-888-736-7725
72
AK Accessories
Ace AR Grip Adapter for AK Type Rifles
AR Grip Adapter for AK Type Rifles. Injection molded from high impact black plastic. Use your favorite AR grip on your AK. Fits stamped and milled AK receivers. AR grip will have to be slightly modified to fit milled receivers. No modification for stamped receivers. Includes grip screw. AKARA A602..............$6.99
Clamp on Front Sight Clamps rigidly to gas block. Shortens sight radius for rapid sight alignment. Note: you must use your windage stud from your existing sight or order the Ace front sight post adapter. Precision machined from steel. Parkerized black Weight 55g. 104CS-C (inside diameter .808)....$64.99 104CS-E (inside diameter .755)....$64.99
Slim line black plastic AK hand guards and piston tube cover. U.S. made and have large side vents. For milled receivers and Chinese stamped receivers. Specify type when ordering. Milled HGTC-M A606....................$22.99 Stamped HGTC A607.........$22.99
Cheek Rest
Cheek Riser, adds 1.0 to the comb height for use with high mounted sights. For use on the AKFX(_) skeleton stocks only, (will not fit ARFX, UL-M etc.) Provides better eye alignment with high mounting optical sights. Includes plastic and steel screws as shown.
CR ............$8.99
Ergo AK Classic Tactical Grip features, an Ambi design with smooth finger grooves. Has bottom storage compartment with tethered rubber plug and over-molded surface. PG-E A???.......$28.99
Miscellaneous Handguards
SureFire Picatinny Rail Fore-end
The SureFire Picatinny rail fore-end is a high-quality Picatinny fore-end for various weapons that replaces the weapons stock fore-end allowing the user to mount a variety of accessories. Machined from military specification hard-anodized aluminum, theyre stronger, dissipate heat much better,and provide rock-solid weapon fit. These precision rails enable consistent repeat zero of any accurately dimensioned devices attached to them, such as SureFire lasers or Weapon Lights. MP-5 SF163.......................$171.99 MP-5K SF177....................$209.99 AK-47 SF183.....................$249.99
Finally a simple, secure, and easily installed rail system for this proven .308 battle rifle. This is a perfect mounting base for reflex sighting systems such as Aimpoints and Eotechs. Includes rear rail base to support target scopes. KAC22121.................$489.99
Known as the M1A Scout EBR (Enhanced Battle Rifle), the M14 EBR/M1A EBR was developed to win a five-year Naval Surface Warfare Center, Crane Division (Crane NSWC) contract to supply the U.S. Naval Special Warfare (SPECWAR) and Marine Corps communities with a SPECOPS-ready SOPMOD accessory-compatible M14 rifle/carbine. With an M14 barrel, receiver and trigger group as its core, Sages EBR sports a totally new look, featuring a retractable buttstock (with graduated stop adjustments) and an adjustable cheek piece. Four MilStd 1913 (Picatinny) rails surround the barrel; another above an added pistol grip accepts standard night-vision and other accessories. An equally well-designed mount system with a quick-release lever lets even an average shooter accurately engage targets out to the maximum effective range of the 7.62 round either in full auto or semi-auto mode. Weight (no scope or devices): 11 pounds, 10 ounces with a 22-inch M14 barrel Sage EBR Stock, Black SI101..........$744.99
Call us at 1-888-736-7725
73
Flashlight Mounts
DSC Rail Angle Mounts Elzetta ZFH1500
Every Elzetta ZFH1500 comes with Sizing Adapters, giving the Flashlight Holder the ability to mount flashlights from 0.7 to 1.1 inches in diameter (18 to 27 mm). The Quick-Release Thumb Screw allows flashlights to be installed and removed rapidly and without tools. It also provides a more robust clamping mechanism while retaining the nut on the device. The Thumb Screw Model is highly recommended. Elzetta ZFH1500 (Standard Model).......$29.95
Matte Black, Olive Drab, Dark Earth
Great when used with scopes, sights, flashlights, etc. Accessories are angled at a 45 degree angle. When used with scopes the iron sights remain visible. Available in 3 lengths. Made from aircraft quality aluminum and hard coated to mil-specs. 1 slot DS9486A..............$15.99 3 slot DS9690A..............$24.99 5 slot DS9697A...............$28.99
Elzetta ZORM
Every Elzetta ZORM comes with Sizing Adapters, giving the Flashlight Holder the ability to mount flashlights from 0.7 to 1.1 inches in diameter (18 to 27 mm). The Elzetta ZORM features all metal construction with a main body of Mil-Spec Type III Hard Anodized 6061-T6 Aluminum, a matte black stainless steel flashlight clamp, and Matte Black steel hardware. Elzetta ZORM.................$65.95
Elzetta ZROC
Every Elzetta ZROC comes with Sizing Adapters, giving the Flashlight Holder the ability to mount flashlights from 0.7 to 1.1 inches in diameter (18 to 27 mm). The Quick-Release Thumb Screw allows flashlights to be installed and removed rapidly and without tools. The integrated Picatinny Rail allows the mounting of an additional accessory such as a laser or navigational light. Elzetta ZROC............$79.95
Great when used with scopes, sights, flashlights, etc. Accessories are angled at a 45 degree angle. When used with scopes the iron sights remain visible. Available in 3 lengths. Made from aircraft quality aluminum and hard coated to milspecs. 1 slot YH9486A...............$15.99 3 slot YH9690A...............$24.99 5 slot YH9697A...............$28.99
GG&Gs staff has solved the problem of interfacing a vertical foregrip with a weapon-mounted flashlight in an ingenious manner. The Offset Tactical Flashlight Mount For Use With Vertical Fore grips places the M3 or other tactical flashlight, offset to the right or left of the weapons forearm at about 5 oclock or 8 oclock, respectively. This permits the operator to manipulate with the thumb, the rocker switch or rear pressure button of tactical flashlights, while the support hand remains solidly on the vertical foregrip. The Offset Tactical Flashlight Mount For Use With Vertical Fore grips comes complete with both rails. The M3 mounting rail can be easily removed and a short section of MIL-STD-1913 rail installed for attaching a SUREFIRE or other small flashlight by means of a standard ring. The mounting rails are fully interchangeable. Manufactured from aircraft grade 6061 aluminum alloy, it has been hard-coat anodized per mil-spec. GGG1131.......................$74.99 1 Flashlight Mt. Ring GGG1195.......................$19.99
Call us at 1-888-736-7725
74
Flashlight Mounts
GG&G Sling Thing
Robust and rigid, the Sling Thing is held in place by counter pressure steel socket head cap screws. For those individuals that have a GG&G Sling Thing that would also like the flexibility of a mounting rail, the Sling Thing MIL-SPEC-1913 rail can be purchased separately and can be substituted for the non-swivel side of both the Standard Sling Thing and the QD Sling Thing. SLiC Thing GGG1227....................................................$37.99 QD SLiC Thing GGG1228..............................................$45.99 SLiC Thing 1913 Rail GGG1229...................................$22.99 1 Flashlight Mt. Ring GGG1195...................................$19.99
DD32.................$69.99
M95-Series
M95-Series six-volt systems powered by two lithium batteries and providing 65 lumens for one-hour of runtime or 120 lumens for 20 minutes using an optional ultra-high output lamp assembly. Supplied with a 1.47 diameter bezel. SFM951XM07 (Dual Thumb Screw Mt).......$368.99 SFM952XM07 (Throw Lever Mt)..................$445.99
Call us at 1-888-736-7725
75
Surefire X300
The versatile SureFire X300 features a solid-state, electronically regulated LED that generates 110 lumens of tactical-level light enough to overwhelm an aggressors night-adapted vision. Its specially developed Total Internal Reflection (TIR) lens cre ates a bright, tightly focused central beam with plenty of reach and enough surround beam to accommodate peripheral vision. A hard-anodized aerospace-grade aluminum body protects the X300s electronics, and O-ring seals and gaskets make the entire unit waterproof to 22 meters. A tempered Pyrex window protects its LED and, thanks to a thin layer of anti-reflective coating, helps maximize light transmission. The X300 attaches to both Universal and Picatinny rails in moments, via its proprietary Rail-Lock system, and comes with adapter plates for both. An ambidextrous toggle/push switch provides convenient, failsafe operation. Optional SureFire grip switches, which allow precision control without altering ones grip on the weapon, are also available for many handguns.
Surefire X400
The SureFire X400 is a powerful LED WeaponLight with an integrated red-laser sight mounted below its solid-state LED. Its versatile beam and highly visible laser are effective in close and long-range applications, making the X400 an ideal choice for law enforcement, military, and self-defense applications.
X300.............$248.99
SureFire G2 Flashlight
The SureFire G2 flashlight is powered by two lithium batteries (10-year shelf life) and made of Nitrolon, a proprietary polymer compound that is lightweight, corrosion-proof and non-conductive. A molded-in gridlock pattern allows for a sure grip in any weather, and although three to four times brighter than a typical 2-D cell flashlight this lightweight powerhouse is less than five inches long; making it ideal when space is at a premium and weight is an issue. Black SFG2..............................$38.99 SFG3..............................$59.99 SFG2LED.......................$68.99 SFG3LED.......................$91.99 SFP6OL LED Reflector...$48.99
X400.............$454.99
The standard long life MN10 Lamp Reflector Assembly produces an amazing 125 lumens of white light with approximately 1 hour of run time. SFMN10............$30.99 The Ultra High output MN11 Lamp Assembly gives you nearly twice the light of the MN10: an awesome 225 lumens with a 20 minute run time. SFMN11............$32.99
Call us at 1-888-736-7725
76
Configurations: With Rotary Switch..........$154.95 With Click Switch.............$159.95 With Hi/Low Tailcap.........$174.95
The Elzetta ZFL-M60 features all metal construction with a main body of Mil-Spec Type III Hard Anodized 6061-T6 Aluminum. Bezels, Bodies, and Tailcaps may be changed/ upgraded as desired. All components are available separately. Configurations: With Rotary Switch..........$159.95 With Click Switch.............$164.95 With Hi/Low Tailcap.........$179.95
Ruger Mini-14/30 and 1911 Autos Recoil Buffer CZ-75 Recoil Buffer Ranch Rifle Buffer SKS Recoil Buffer BTRM14.............$14.99 BTSKS1...............$9.99 BT45A (8 pack).....$9.99 BTCZ1...........$9.99
Call us at 1-888-736-7725
77
Cleaning kit that clips onto a standard issue web belt. CJ111..........$24.99
Gas-tube Cleaners
Finally a handy way to clean the entire gas tube(50 pack) AR775.........$9.99
Now!! Reclaim the lost space in the standard handgrip of all M4/M-16. This is the civilian bright brass version of the military issue cleaning system. The essential cleaning rod, tips, and brush are neatly packed into the GripKit. Developed for lightweight special operations weapons, bore clearing and cleaning can be accomplished in seconds. The set compliments and is fully compatible with the extensive #223 M4/M16 Cleaning system. 5.56 Version O225....................$52.99 7.62 Version O225A..................$52.99
Specifically designed to clean .22 Caliber thru 45 Caliber pistols. Now automatics can be cleaned correctly, from breech to muzzle, without disassembly. All Caliber patches and a heavy-duty bore brush easily strip the copper from bores. Everything is neatly packed in an 8 oz., pocket size, soft-pack case. O610.......................$38.99 This 1/2 lb. cleaning system replaces over 3 lbs. of conventional gear and fits into the stock of the weapon. With the flexible cleaning rod it is only possible to clean correctly, from breech to muzzle. The receiver, locking lugs, chamber, shoulder and neck can easily be cleaned. Bore obstructions, mud or snow, can be dislodged out the muzzle end. A stuck empty case or bullet lodged in the neck can be easily knocked out. For instruction go to the How Tos, then Video Clips & Instruction Sheets, Then The Demonstration Video on How to Clean your 5.56. Non mil-spec. O224.............$53.99
Call us at 1-888-736-7725
78
Call us at 1-888-736-7725
79
Barrel Complete (Excellent)......... $749.99 1. Barrel Stripped (Includes Front & Gas Cylinder Body) New............. $499.99 40. Barrel Lock................................... $24.99 38. Barrel Lock Ring & Spring............ $5.99 6. Bipod Assembly Complete............$249.99 Bipod Leg Headed Pin..................$2.99 10. Bipod Leg (Left or Right)...............$89.99 8. Bipod Leg Pivot Screw..................$7.99 Bipod Leg Retainer........................ $4.99 Bipod Leg Retainer Spring............$1.99 Bipod Leg Retainer Spring Pin...... $4.99 7. Bipod Yoke....................................$44.99 78. Bolt Cam Actuator.........................$39.99 Bolt, New, Complete.....................$289.99 Bolt, New, Stripped.......................$179.99 Bolt Stripped, Used, Serviceable..$44.99
77. Bolt Plug Pin.................................. $1.99 79. Bolt Plug.......................................... $14.99 Buffer Assembly..............................$84.94 Buffer Yoke..................................... $19.99 Buttstock, Complete....................... $124.99 Buttstock Hinge Pin........................ $1.99 Buttstock, Sling Swivel................... $5.99 34. Carry Handle................................. $99.99 36. Carrying Handle Detent & Spring.... $6.99 35. Carrying Handle Retainer & Pin......$6.99 99. Cartridge Guide, Front.................. $44.99 98. Cartridge Guide, Rear................. $54.99 101Cartridge Guide Pin....................... $7.99 41. Cocking Handle, Complete............ $139.99 45. Cocking Handle Guide.................. $34.99 46. Cocking Handle Guide Screw........ $1.99 43. Cocking Lever Detent.................... $6.99 42. Cocking Lever Spring..................... $2.99
Driving Spring Old or New Style.. $5.99 Driving Spring Guide....................$19.99 73. Ejector........................................... $7.99 71. Ejector Pin.................................. $0.99 72. Ejector Spring............................. $2.99 69. Extractor..................................... $29.99 67. Extractor Spring & Plunger.......... $7.99 105 Feed Lever................................... $49.99 120 Feed Pawl Assembly...................$69.99 Feed Tray, Old Style, Complete... $99.99 Feed Tray Hanger........................ $79.99 106 Feed Tray Cam............................$129.99 Feed Tray Cover, Complete......... $649.99 Feed Tray Cover, Stripped............ $424.99 Feed Tray Cover Hinge Latch...... $19.99 Feed Tray Cover Hinge Pin..........$8.99 Feed Tray Pawl............................ $19.99
Call us at 1-888-736-7725
80
Accessories
Combination Wrench with Reamer.........$9.99 Combination Wrench, E-3...................... $29.99 Padded Sling........................................... $14.99 Pintle, New or Old Style..........................$74.99 Rivet Set (includes T&E plate)................$44.99 Spare Barrel Bag....................................$24.99 T&E Assembly.........................................$149.99 Tripod......................................................P.O.R.
E-3 Parts
Barrel, Complete, Long........................$849.99 Barrel, Complete, Short....................... $999.99 $399.99 Bipod Assembly..................................... $49.99 Bipod Yoke............................................. $139.99 Buttstock................................................ $29.99 Driving Spring Guide.............................. $39.99 Flash Suppressor.................................. $139.99 Front Grip, Complete............................. $49.99 Front Sling Swivel................................. Heat Shield...........................................$84.99 $324.99 Op-Rod.................................................. $134.99 Rear Sight............................................. Top Cover, Stripped..............................$349.99 Top Cover W/ E-3 Cam & Lever.......... $549.99
E-4 Parts
Barrel, Complete, Short........................P.O.R. Bipod Assembly..................................... $599.99 Buttstock................................................ $224.99 Flash Suppressor.................................. $49.99 Front Grip, Complete............................. $599.99 Op-Rod.................................................. $324.99 Sling.....................................................$39.99 Rail Top Cover, Complete..................... $1,999.99
Call us at 1-888-736-7725
81
Tom Carpenter
Tom Carpenter has been dominating shooting events since the late 1990s, placing consistently in the top three shooters in nearly every event in which he participates. J&T and DSC are proud to have its name associated with Tom Carpenter, as he embodies the same excellence that we strive for on a daily basis. We wish him luck with his competitions this year. We are certain he wil excel, as usual.
2007
2004
TAC2 Spring Warm-Up 3- Gun Championship - HOA TN State Tactical 3- Gun Championship - HOA South Carolina IDPA - ESP Champion USPSA Area 6 L-10 2nd Master Alabama IDPA - ESP Champion USPSA Area 6 3- Gun -HOA Limited Rifle Champion Shotgun Champion Southern Regioal IDPA -ESP 1st Master East Coast Championship/Carolina Cup - ESP 1st Master DPMS Tri-Gun Challenge - 2nd Tactical Division USPSA TN Section Championship - L-10 Champion USPSA Area 5 - L-10 1st Master IDPA Nationals - CDP 4th Master USPSA Practical Shotgun Championship - 4th Overall Tennessee IDPA - ESP Champion TAC2 Championship - HOA Alabama USPSA 3-Gun Championship - HOA Limited
South Carolina State IDPA - 1st Master ESP Division Area 6 USPSA -1st Master L-10/Area 6 Champion CMMG 3-Gun - 5th Overall Southern Regional - 1st Master ESP Div. Georgia State USPSA - 2nd Master Kettlefoot IDPA Championship - 5th Overall DPMS Tri-Gun Challenge - 5th Overall North Carolina State IDPA - CDP Champion TN State USPSA Championship - L-10 Div. HOA USPSA 3-Gun Nationals - 4th GM Limited Division TN State IDPA - 3rd Master ESP Division Kentuckiana Combat Pistol Championship - 2nd Overall TAC-2 Championship - HOA USPSA Area 6 3-Gun - Limited Division Champion NFA Subgun Championship - Iron Sight div. - 2nd - Optics division - 2nd
2005
KCR Tactical Rifle Championship - HOA Kentuckiana Combat Pistol Championship - 2nd Overall NFA Subgun Championship - HOA SMM 3- Gun Championship - 3rd Tactical Iron Division South Carolina IDPA - ESP Champion Area 6 USPSA Championship - 1st Master L-10 Southern Regioal IDPA -ESP Champion Area 8 USPSA Championship - HOA L-10 DPMS Tri-Gun Challenge - 5th Overall North Carolina IDPA - ESP 1st Masterl TN Section USPSA Championship - HOAL-10 Area 5 USPSA Championship - 3rd Master Georgia IDPA - ESP 1st Master KCR Combat Pistol Championship - HOA TAC-2 Championship - HOA USPSA Area 6 3-Gun - Limited Champion
BRM 3-Gun Championship 3rd Overall Tac-Iron division South Carolina IDPA 1st Master CDP Division Alabama USPSA HOA L-10 KY USPSA 3-Gun Championship 1st GM Limited FNH USA 3-Gun - 5th Overall Limited DPMS Tri-Gun Challenge 6th Overall Tac-Iron TN section USPSA Championship 3rd GM Limited GA IDPA Championship 1st Master CDP KCR/NFA Subgun Championship 1st Metallic sights & 3rd Optic TN State IDPA 1st Master ESP Division GA State USPSA HOA L-10 TAC2 Championship HOA USPSA Area 6 3-Gun HOA Limited Division Rifle Champion
18 1x8 SS Wilson Arms HBAR DSC M4-12.0 handguard DSC Rail Bipod Adapter Badger Ordnance Mk 12 Gas Block Badger Ordnance Gen 2 Tac Latch Flattop upper Troy Industries Front & Rear Flip up iron sights (X-S 24/7 post) Hard chrome bolt and carrier w/ D-Fender A-2 Phantom Flash Hider SPR Pistol Grip JP Trigger Ace Skeleton Stock Redi Mag w/ bolt hold open Optical platforms include: 3.5x ACOG TA-01 w/ detach ARMS mount and C-MoreSight.
2009
South Carolina IDPA HOA ESP Division Alabama USPSA HOA L-10 KY USPSA 3-Gun Limited Division 2nd Overall
2006
Kentuckiana Combat Pistol Championship - 2nd Overall NFA Subgun Championship - HOA SMM 3- Gun Championship - 4th Tactical Iron Division Area 6 USPSA Championship - L-10 Champion Southern Regioal IDPA -ESP Champion GA State USPSA Championship - Single Stack Division Champion Kettlefoot IDPA Championship - HOA Area 8 USPSA Championship - L-10 3rd place Master DPMS Tri-Gun Challenge - 4th overall Tactical Iron TN State USPSA Championship - L-10 Division State Champion
2010
Alabama USPSA - 1st Master Single Stack South Carolina IDPA - 1st Master ESP LaRue Tactical 3-Gun Championship - 7th Overall Alabama IDPA - 1st Master CDP NFA Spring Nationals _ HOA Iron Sight Division Optical Sight Division Steel City Carbine Championship - 3rd Overall Tactical Irons USPSA Area IV - 3rd Master L-10 Carolina Cup HOA CDP Division VA State IDPA - 1st Master CDP AND MUCH MORE TO COME!!!
Call us at 1-888-736-7725
82
F.A.Q.s
Visit us at www.jtdistributing.com to see more FAQs Frequently Asked Questions
Who makes your barrels? We have a few different barrel manufacturers that we subcontract barrels to such as Shaw and Wilson Arms. What are your barrels chambered for and can I shoot .223 in your barrel? Our barrels are chambered for 5.56 Nato unless otherwise stated. The 5.56 chamber is slightly larger than the .223 Remington chamber. This allows use of both 5.56 and .223 ammunition without extraction problems. What is the twist rate? The twist rate is listed typically listed with the description of the barrel. On 5.56 barrels, bull barrels are offered both 1x8 and 1x10 twist rates, our standard barrels are primarily 1x9 twist. We do offer some 1x7 twist rates for certain contours, listed in the description of the barrel, barreled upper or kit. Are your barrels chrome lined? Our standard HBARs are 4140 chrome moly steel. Chrome-moly will be more accurate, but not quite as durable as a chrome lined barrel. We have most configurations of chrome-lined barrels available as an upgrade; inquire for pricing and availability. We also offer a few configurations with 4150 chrome vanadium steel, check the descriptions to see what is available. Who makes the parts in your kits? We use various military sub-contractors to make the different components. There are only a few manufacturers that make most of the components correctly to military specs, and weve dealt with most of them for years. Due to confidentiality agreements, these names can not be released. What is included in a kit? A kit consists of a complete barreled upper with bolt carrier assy. & charging handle, a lower parts kit, and buttstock assembly. What tools do I need to assemble my kit? With our kits the uppers come assembled and headspaced, so most of the work is done for you. To assemble the lower you will need a good punch set, a hammer, an adjustable wrench or spanner wrench (depending on which stock you purchased), a flat head screwdriver, common sense, some mechanical ability, and patience. Most everything will only go in one way, so go slowly and carefully. Most can assemble their first lower in just under an hour. What tools do I need to take apart my upper? For upper assembly you will need a vice, a way of holding either the barrel or upper in the vice (action block), a barrel or armorers wrench, a torque wrench, a punch for the gas tube pin, a hammer, good instructions, common sense, and some mechanical ability. Can I put a 11.5 barreled upper on my AR-15? Unless your lower receiver is registered as a Short Barreled Rifle, M-16, or a pistol then the answer is no. The shortest length barrel you can legally install is 16. How do I make my AR-15 a SBR? Contact your local ATF office and they can get you the proper paperwork to fill out and submit to register your lower as a SBR. Can I install M-16 parts in my AR-15 to make it full auto? NO! NO! NO! Dont even think about it! Any attempt is a felony! Contact the ATF @ 1-800-ATF-GUNS for details. Do you fully assemble and headspace the uppers in your kits? Yes, the uppers in our kits come ready to fire. Do you bill my credit card when the order is placed or when my package is shipped? We do not bill your card until the day the order is packed and ready to be shipped. I will be near your area; can I stop by and pick up an order? We are not currently set up for walk-in sales. If you give us enough advance notice, we may be able to set up a pick up with one of our local dealers. How do I know if the prices I have are correct? Since the prices in this business can change very drastically over very short periods of time, contact us to ensure that you get the most up-to-date pricing. How do I calculate shipping? The best way to get the exact shipping is to contact us with the order and your ZIP code. Minimum UPS shipping is $14. Packages valued under $100 can be shipped via USPS with a minimum shipping of $7. I dont see the configuration that I want listed; do you have it? We offer many different configurations that are not listed, but are available. Please call to inquire! What do I need to change my AR-15 to another caliber? Depending on which caliber you are wanting to change to will determine what you will need. Typically in the caliber conversion uppers we list what is needed. Are you capable of offering special runs of rifles or kits in configurations other than listed? We subcontract for various large manufacturers and parts companies. Send Jack a spec sheet and quantities you are wanting and he can get back to you with a quote and suggestions on how to better fulfill your needs. Custom Laser engraving is available.
Call us at 1-888-736-7725
83
F.A.Q.s
Gunsmithing Services
1. Install new J&T barrel on customers supplied barreled upper...................................................................................................................$25.00 Includes checking headspace. Does not include the cost of the barrel. Barrel must be purchased from J&T Distributing at the time of installation. Customer is required to send barreled upper, bolt carrier assy., and charging handle. 2. Install customer supplied barrel on customer supplied barreled upper......................................................................................................$35.00 Includes checking headspace. Customer is required to send barreled upper, bolt carrier assy., and charging handle. 3. Install customer supplied free float handguards on customer supplied barreled upper.............................................................................$45.00 Customer is required to send barreled upper and handguard. Installation of free float handguards on a barrel with a permanently attached muzzle brake may be possible with some muzzle brakes for an additional cost. This cost will be billed at the normal shop rate of $65/hr. 4. Install new J&T free float handguard on customer supplied barreled upper..............................................................................................$45.00 Customer is required to send barreled upper. Installation of free float handguards on a barrel with a permanently attached muzzle brake may be possible with some muzzle brakes for an additional cost. This cost will be billed at the normal shop rate of $65/hr. 5. Thread a customer supplied barrel for 1/2x28 tpi.....................................................................................................................................$50.00 6. Thread a customer supplied barrel for customer specified thread pitch....................................................................................................$75.00 7. Cut and Crown a customer supplied barrel...............................................................................................................................................$60.00 8. Install and permanently attach customer supplied muzzle brake on customer supplied threaded barrel................................................$125.00 Includes reparkerizing barrel and muzzle brake only, cost of muzzle brake is not included. 9. Install and permanently attach customer supplied muzzle brake on customer supplied crowned barrel................................................$150.00 Includes reparkerizing barrel and muzzle brake only, cost of muzzle brake is not included 10. Complete Rifle Cleaning and Inspection..................................................................................................................................................$85.00 Includes labor only. 11. Complete Range Test.............................................................................................................................................................................$225.00 Includes accuracy firing, function firing, and sighting in. Cost of ammunition & complete inspection of firearm is included. 12. Inspect and Tune Upper or Rifle.....................................................................................................................................................From $45.00 Includes inspection, diagnosing problem, repairing issue, and test firing. Pricing will vary depending on problem and solution. Gunsmithing time will be billed at normal shop rate and does not include parts needed for the repair. An itemized invoice will be included to account for all charges. Call for quotes on services not listed.
Call for authorization prior to shipping your firearm. Please clean weapons prior to sending in for gunsmithing.
Double Star Corp. Limited Lifetime Warranty DSC is warranted to the original retail purchaser only for the lifetime of the said original retail purchaser. DSC will, at its option, repair or replace without charge any DSC firearm that fails due to a defect in materials or workmanship. Parts and labor are included. Repairs are warranted for the duration of the original warranty. This warranty applies only to factory built firearms. Firearms built using DSC lower receivers, frames, and/or components are not eligible for this warranty. What is not covered by this warranty? DSC will not cover damage to your firearm caused by: Failure to provide proper care and maintenance; Accidents, abuse, or misuse; Barrel obstruction; Hand loaded, reloaded, or improper ammunition ; Unauthorized adjustments, alterations, repairs, or modifications; Normal wear and tear; Rust or corrosion; Excessive or unreasonable use Note: Non-DSC products available in this catalog are warranted exclusively by their manufacturers in accordance with terms and conditions packaged with the products. DSCs warranty does not apply to non-DSC products, even if packaged with DSC products. DSC will not pay incidental or consequential damages under this warranty. By this we mean any loss, expense, or damages other than to repair the defects in the firearm or replace the firearm. Under no circumstances shall DSC be responsible for incidental or consequential damages with respect to economic loss or injury to property arising out of use of hand loaded, remanufactured, or faulty ammunition, negligence, unsafe handling or unauthorized modifications to the firearms. How do I obtain service? Call DSCs Customer Service Department at 859-745-1757 between 10:00 am and 4:00 pm EST, Monday through Thursday. Describe your problem to the Customer Service Department personnel, who will determine if your firearm is eligible for warranty repair. If eligible, you will be issued a Return Merchandise Authorization (RMA) Number. Guns are not accepted for repair without a RMA number. You may be required to provide satisfactory proof of original purchase, such as a sales receipt. Pack your firearm for shipment to DSC in a hard case to prevent damage in shipment. DO NOT PACK OR SHIP LOADED FIREARMS!! It is both illegal and dangerous to ship a loaded firearm through the mail. Please ensure that the RMA number is written on the outside of the package and retain this number for reference when contacting the DSC Customer Service Department. Be sure to include a letter with your name, address, daytime phone number, RMA number, and a description of your problem. Check with the shipping company you are using to be aware of their regulations and restrictions concerning the type of firearm that you are returning. Insure the package for the replacement value of the gun and ship the package in the appropriate manner prepaid to the DSC address listed below. No C.O.D. packages will be accepted. Double Star Corp. Attn: Service Department RMA#__________ P.O. Box 4671. Winchester, KY 40392
Call us at 1-888-736-7725
84
Payment
J&T is pleased to accept Visa, MasterCard, American Express, and Discover. If your order is sent via U.S. Mail, please include one of the following: personal check, money order, or credit card number, along with the information requested in the order form. All checks and money orders are held for clearance (2 weeks).
Shipping
J&T and DSC ship packages via U.S. Mail, Fed Ex Ground, Next Day Air, 2nd Day Air or 3 Day Select, and UPS shipping. Shipping charges are outlined on the order form. All pistols, pistol frames, and pistol lowers must be shipped via Next Day Air if shipped via UPS. Direct any questions regarding your order to a staff member at 859-745-1757.
Export
Products sold to U.S. based customers are sold for end use in the United States only. Export of these products without prior approval of J&T or DSC is prohibited. Please contact J&T or DSC if you wish to sell any J&T or DSC products outside the U.S.
DoubleStar Corp and J&T Distributing reserve the right to correct any errors or inaccuracies contained herein and to revoke stated offers at any time without notice. Weights, measures, and shipping information are approximate and product images may appear without perfect accuracy. DoubleStar Corp and J&T Distributing disclaims all warranties, whether express or implied, with respect to the accuracy or completeness of any information contained herein, to the fullest extent possible under applicable laws. Under no circumstances shall DoubleStar Corp or J&T Distributing be liable for any direct, indirect, incidental, special or consequential damages that result from any information contained herein.
Disclaimer
Call us at 1-888-736-7725
85