Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Specifications
Under Floor Plates are an extruded aluminum with pre-drilled holes measuring 3-1/2" x 48" (88.9 mm X 1.2 m) long. Tubing snaps into a fixed channel, making installation fast and easy. No silicone adhesive is required. The channels tight grip improves heat transfer and eliminates annoying ticks and clicks as the tubing expands and contracts.
Installation Parameters
1. Measure the joist bay and determine the number and length of each Under Floor Plate required. Estimate the lineal feet of Under Floor Plates required as 1.4' (426.7 mm) of plate per square foot (square meter) of heated floor. Note: If a plate needs to be cut, use a carbide tipped aluminum cutting blade and deburr the tube channel. 2. Attach the Under Floor Plates to the subfloor with the use of #83/4" (19.1 mm) selftapping screws placed 1218" (304.8 mm - 457.2 mm) apart along the plate. A coil roofing nail gun (3/4" (19.1 mm) nails) or a pneumatic staple gun 1" x 3/4" (25.4 mm x 19.1 mm) 16 gauge staples may also be used. 3. Under Floor Plates should be spaced 8" (203.2 mm) OC. Wider spacing is not recommended. Allow a minimum of 1" (25.4 mm) space between the ends of the plates. Stop the plates 812" (203.2 mm - 304.8 mm) from the end of the joist bay to allow the tubing to transition to the next run of plates.
(11.1 mm)
Description
Qty
Order#
20
0955314
CAUTION
This Engineering Sheet is not intended to provide full installation instructions and safety information. In order to avoid property damage or injury, please refer to the complete installation manual and product safety information provided with the product.
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
USA: No. Andover, MA Tel. (855) 699-2887 Fax: (978) 794-1848 radiant.watts.com Canada: Burlington, ONT. Tel. (905) 332-4090 Fax: (905) 332-7068 radiant.watts.com
ES-Under-Floor-Plates 1142
2011 Watts