Sei sulla pagina 1di 2

updated OTR April 2008

DAVCO CERAMIC TILE CLEANER 800


TILE, GROUT & MASONRY CLEANERS DESCRIPTION
Davco Ceramic Tile Cleaner 800 are general purpose cleaners designed for routine maintenance of showers, bathrooms and other tile/stone/masonry installations. Both products safely and easily remove mold and mildew, as well as mineral deposits, hardwater and rust stains. Davco Ceramic Tile Cleaner 800 concentrate are ideal for stripping grout haze, cement/mortars smears and efflorescence from new and renovated construction. Cleaner are suitable for interior or exterior use over vertical or horizontal surfaces. Davco Ceramic Tile Cleaner 800 concentrate provides extra strength for industrial/institutional demand and dilutes with water.

SHELF LIFE
Factory sealed containers of this product are guaranteed to be of first quality for two (2) years if stored indoors and off the ground at 65 - 80F (18 - 26C) / 50% relative humidity.

LIMITATIONS
Do not use on polished marble, polished limestone, terazzo, terazzo tile or bronze / metalic glazed tiles; Avoid contact with porcelain fixtures, sinks or tubs.

TECHNICAL DATA
Physical Properties

BASIC USES
-Ceramic Tile -Glass Block -Unpolished marble -Concrete Block -Grout Joints -Glass Showers Doors -Vanity/Counter Tops -Quarry Tile -Slate -Brick -Masonry -Stucco -Tubs/Spas/Sowers -Metal Fixtures -Pavers -Granite -Mosaics -Concrete -Fiberglass

Property (Test Method)


Specific Gravity ASTM C905 - modified Wet Density ASTM C905 - modified Viscosity (LIL) 1030-93) Colour (LIL 1026-93) Grain (LIL 1028-93) Odor (LIL 1027-93) pH (LIL 1031-93) Freeze/ thaw (LIL 1010-91) Mechanical Stability (LIL 1040-88)

CTC-800
1.08 1.08kg / liter 9.0 lbs. / US gal. Water equivalent Clear Clean Citrus 1.00 Pass Stable

ADVANTAGES
EASY TO USE Quickly applied sprayer, scrub brush, sponge, roller or rag. FAST ACTING Penetrates and lifts mold/mildew, soil, soapy/oil scum, cement films, grout haze and stains; open cleaned areas to traffic in minutes; SAFE Non Flammable; No Solvents, Bleach or Muriatic Acid; Non-fuming-clean, fresh fragrance; Does not attack aluminium, chrome, fiberglass or acrylic finishes; ECONOMICAL Mix 1 part of Davco Ceramic Tile Cleaner 800 concentrate to 3 part of clean water.

Specification subject to change without notification. Result shown are typical but reflect test procedures used. Actual field performance will depend on the type of tile used, installation methods and site conditions.

INSTALLATION
Preparation
Before starting application, always use a small test area to verify compatibility and results in an inconspicuous area, put 2-3 drops of Davco Ceramic Tile Clean 800 concentrate on the surfaces well with clean water and let dry Examine surface for discoloration / shading, staining, dulling, etching or other problems. If result are satisfactory, proceed with preparation by vacuuming or brooming all areas to remove loose dirt and debris, saturate grout joints, cement plasters/stuccoes and porous tile / stone with clean water before application begins.

PACKAGING
1 kg, 4kg, 20kg.

updated OTR April 2008

Methods
Refer to application / dilution chart. Application Normal Cleaning Unpolished Marble / Limestone Slate, Granite, Brick or Masonry Concrete Heavy Soil, Stains Mineral deposits Mold / Mildew Removal Dilution Ratios* CTC-800 1:3 1:3 1:2 1:1 1:1 1:1

PRECAUTIONS
Perform test application to verify compatibilities and results (refer to preparation section); Never mix or dilute with other cleaners, bleach or ammonia products; Protect adjacent surfaces (e.g. carpet, furniture) from spray, splashes, cleaning, residue and rinse water; Surfaces wet with cleaner will be slippery- use caution walking over them and close off wet areas to traffic; Let cleaned areas dry thoroughly (24 hours minimum) before applying sealers or coatings; Wear gloves, eye protection and protective clothing while measuring, mixing or applying cleaner; Avoid contact with eyes and prolonged contact with skin; Use adequate ventilation; Store tightly capped and out of reach of children.

* Volume of Davco Ceramic Tile Cleaner 800 concentrate: Volume(s) of clean water. Pour Davco Ceramic Tile Cleaner 800 concentrate into a clean plastic pail or mixing container. Measure approximately the volumes of water needed. Add water and stir for a minute or until uniform. Apply over surfave to be cleaned with pump spray, sponge, brush, mop, roller or rag. Use stiff brush broom or scrub pad to work cleaner into rough / badly soiled surfaces, satins or cement smears again. Flush or mop twice with clean water. Change mop water frequently. Use broom, squegee, wet vacuum, mop or sponge to remove rinse water. Repeat steps for stubborn stains, heavy soil or old / thick cement smears.

COVERAGE
Approximate Coverage per product / package @ Recommended Dilution Ratios Product (Pkg size) No Dilution Davco CTC800 (4 kg) Davco CTC800 (20 kg) x x x x 1:1 1200ft2/ 112m2 6000ft2/ 558m2 1:2 1800ft2/ 168m2 9000ft2/ 836m2 1:3 2400ft2/ 224m2 12000ft2/ 1116m2

Actual Coverage will vary depending on site conditions, type of surface, cleaning methods and spillage / wastage.

No. 9, Jalan Canang Emas 8/KS10, Telok Gong, 42000 Port Klang, Selangor Darul Ehsan. Tel: 603-3134 1816 Fax: 603-3134 3616 Email: novabond@parexdavco.com.my Website: www.parexdavco.com.au

Potrebbero piacerti anche