Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
SHACKLES
General
SIDE LOADING REDUCTION FOR SCREW PIN AND SAFETY SHACKLES ONLY
Angle of side load from Vertical in-line of shackle
0 In-Line*
45 From In-Line
90 From In-Line
*= In-Line load is applied vertical to the pin.
It is required that the shackle be regularly inspected and that such inspection should take place as a minimum in accordance with
the standards given in the country and all relevant requirements of the rigging Code of Practice. This is necessary, because the
products in use my be affected by wear, misuse or over loading with resulting deformation and alteration of the steel structure.
Usage
Select the correct type of shackle for a particular application.
3HACKLES SHOULD BE lTTED TO THE LOAD IN THE MANNER THAT ALLOWS THE SHACKLE BODY TO TAKE THE LOAD IN A TRUE LINE ALONG ITS CENTRE
LINE
and not in such a way that bending loads are induced, other than those for which the shackles is designed.
When using shackles in conjunction with multi-leg slings, due consideration should be given to the effect of the angle between the legs
of the sling. As the angle increases so does the load in the sling leg and consequently in any shackle attached to that leg.
To avoid eccentric loading of the shackle a loose spacer may be used on either end of the shackle pin or a shackle with a smaller jaw
width should be used.
Do not reduce the width between the shackle jaws by welding washers or spacers to the inside faces of the eyes or by closing the
jaws, as this will have an adverse affect on the mechanical properties of the shackle.
When a shackle is used to secure the top block of a set of rope blocks the load on this shackle is increased by the value of the
hoisting effort.
Avoid applications where due to movement (e.g. Of the load or rope) the shackle pin can rotate and possibly be unscrewed.
Finished shackles may not be heat treated because this may affect the Working Load Limit and the material structure.
Shackles in use should be subject to thorough examination by a competent person at least every 6 months.
SECTION 3
SHACKLES
SHACKLES
SECTION 3
SHACKLES
SECTION 3
SHACKLES
SECTION 3
SHACKLES
Part
No.
WLL
(Ton)
Weight
ea (kg)
F
(mm)
02216009
02216011
02216013
02216016
02216019
02216022
02216026
02216028
02216032
1018393
1018419
1018437
1018455
1018473
1018491
1018516
1018534
1018552
0.75
1.00
1.50
2.00
3.25
4.75
6.50
8.50
9.50
0.09
0.14
0.17
0.33
0.62
1.07
1.64
2.28
3.36
13.5
16.8
19.1
20.6
26.9
31.8
36.6
42.9
46.0
9.65
11.2
12.7
20.6
19.1
22.4
25.4
28.7
31.8
31.0
36.6
42.9
47.8
60.5
71.5
84.0
95.5
108
7.85
9.65
11.2
12.7
16.0
19.1
22.4
25.4
29.5
21.3
26.2
29.5
33.3
42.9
51.0
58.0
68.5
74.0
19.1
23.1
26.9
30.2
38.1
46.0
53.0
60.5
68.5
37.3
45.2
51.5
58.5
74.5
89.0
102
119
131
53.0
63.0
74.0
83.5
106
126
148
167
190
5.60
6.35
7.85
9.65
11.2
12.7
12.7
14.2
16.0
42.2
51.5
60.5
68.5
85.0
101
114
129
142
7.85
9.65
11.2
12.7
17.5
20.6
24.6
26.9
31.8
Part
No.
WLL
(Ton)
Weight
ea (kg)
E
(mm)
02216108
02216109
02216111
02216113
02216116
02216119
02216122
02216126
02216128
02216132
02216135
02216138
02216142
02216151
02216157
02216170
1019466
1019468
1019470
1019471
1019472
1019490
1019515
1019533
1019551
1019579
1019597
1019613
1019631
1019659
1019677
1019695
0.50
0.75
1.00
1.50
2.00
3.25
4.75
6.50
8.50
9.50
12.00
13.50
17.00
25.00
35.00
55.00
0.50
0.10
0.15
0.22
0.36
0.62
1.23
1.79
2.28
3.75
5.31
7.18
9.43
15.4
23.7
44.6
11.9
13.5
16.8
19.1
20.6
26.9
31.8
36.6
42.9
46.0
51.5
57.0
60.5
73.0
82.5
105
7.85
9.65
11.2
12.7
16.0
19.1
22.4
25.4
28.7
31.8
35.1
38.1
41.4
51.0
57.0
70.0
28.7
31.0
36.6
42.9
47.8
60.5
71.5
84.0
95.5
108
119
133
146
178
197
267
6.35
7.85
9.65
11.2
12.7
16.0
19.1
22.4
25.4
28.7
31.8
35.1
38.1
44.5
51.0
66.5
19.8
21.3
26.2
29.5
33.3
42.9
51.0
58.0
68.5
74.0
82.5
92.0
98.5
127
146
184
15.5
19.1
23.1
26.9
30.2
38.1
46.0
53.0
60.5
68.5
76.0
84.0
92.0
106
122
145
46.7
53.0
63.0
74.0
83.5
106
126
148
167
190
210
233
254
313
348
453
32.5
37.3
45.2
51.5
58.5
74.5
89.0
102
119
131
146
162
175
225
253
327
6.35
7.85
9.65
11.2
12.7
17.5
20.6
24.6
26.9
31.8
35.1
38.1
41.1
57.0
61.0
79.5
SECTION 3
SHACKLES
Part
No.
WLL
(ton)
Weight
ea (kg)
F
(mm)
02216204
02216205
02216206
1021174
1021192
1021218
85
120
150
43.5
81
120
105
127
133
145
165
203
79.0
92.0
105
71.0
82.5
95.5
267
330
372
66.5
76.0
95.5
327
365
419
344
419
483
453
546
625
184
200
229
69.0
79.0
92.0