Sei sulla pagina 1di 9

TEL: +82-31-706-2514 FAX: +82-31-706-2519 Email: dteg@d-teg.com www.d-teg.

com

SRX M1000 SERVICE MENU


1. Entering the SERVICE MENU

Press and hold 1 and 3 keys together during 5seconds and release. 2. Navigating the SERVICE MENU: A cursor can be moved using the LEFT/RIGHT/UP/DOWN keys on the front panel or the remote controller. Press (-) (+) keys to change the settings.

1/9
VER 1.0 3/8/2006

TEL: +82-31-706-2514 FAX: +82-31-706-2519 Email: dteg@d-teg.com www.d-teg.com

2/9
VER 1.0 3/8/2006

TEL: +82-31-706-2514 FAX: +82-31-706-2519 Email: dteg@d-teg.com www.d-teg.com

S/W UPGRADE 1) Download and copy (update_m1k_all.img) file to USB memory stick and insert USB memory stick into front USB port. 2) Go to service menu and select S/W UPGRADE

3) Select UPDATE START and press (+) button then start the upgrade as below,

4) After finished the upgrade as below, press (+) button again, then DVR will restart automatically

WARNING: Do not switch OFF OR PRESS any key during the upgrade process of the SRX M1004 or SRX M1008, SRX M1016. REMARK: The initial password of DVR will be changed to 000000.
#After the upgrade, please check the DVR version in information menu. ### PASSWORD RESET HOT KEY: REW+ Display

3/9
VER 1.0 3/8/2006

TEL: +82-31-706-2514 FAX: +82-31-706-2519 Email: dteg@d-teg.com www.d-teg.com

HDD INSTALLATION
WARNING: POWER SHOULD BE OFF BEFORE MAKING HDD INSTALLATION. 1. 2. Make sure power is OFF. And disconnect the power cord from the DVR. Open top cover and install HDDs as below picture.

Primary HDD: MASTER setting

HDD2: Secondary MASTER HDD3: Secondary Slave

NOTE: Only 3 HDDs can be installed. Make sure the HDD settings. 3. 4. 5. Close Top cover, after install new HDDs and turn on the DVR. Go to the SETUP SYSTEM Disk and format HDDs. Turn down and turn on again. Then DVR will show you HDD capacity at live display.

NOTE: We recommend HDDs made by Maxtor or Hitachi. We tested up to 400GB HDD. WARNING: Do not use Western Digital HDDs. DVR cannot detect it.

4/9
VER 1.0 3/8/2006

TEL: +82-31-706-2514 FAX: +82-31-706-2519 Email: dteg@d-teg.com www.d-teg.com

DDNS service - one DVR


If you have only one DVR in your area, please use the DMZ host function of router. Example) 1. The local DVR IP is 192.168.1.110. 2. Then set the router as below,

3. Check the SERIAL NO. at INFO menu Ex) Below SERIAL NO.: M10067C

5/9
VER 1.0 3/8/2006

TEL: +82-31-706-2514 FAX: +82-31-706-2519 Email: dteg@d-teg.com www.d-teg.com

4. Connection from a remote site 1) Open DvrPlayer 2) Write IP and PORT as follows (SERIAL NO.dvrhost.com) ex) M10067C.DVRHOST.COM

SRX M1000
M10067C .

3) The initial password is 000000 4) Press ADD TO LIST

DDNS SERVICE CONFIGURATION

1. Request IP of the DVR (M10067C) Ex) M10067C.DVRHOST.COM 2. dvrhost.com inform public IP address of M10067C.

dvrhost.com

3. Directly connect to 211.245.254.6 Public IP: 211.245.254.6

4. DMZ Hosting
SRX M1000

6/9
VER 1.0 3/8/2006

Host Name: M10067C Intra IP:192.168.1.110

TEL: +82-31-706-2514 FAX: +82-31-706-2519 Email: dteg@d-teg.com www.d-teg.com

DDNS Service - Multi DVRs


REMARK: SET PORT NO at DVR NETWORK MENU 1. Port Forwarding Diagram
Computer A through Internet

Public IP: 211.245.254.6

Port Forwarding

2001

2002

Port 555

SRX M1000

Port 666
SRX M1000

DVR -A 192.168.1.150 SERIAL NO.: J00EE9

DVR -B 192.168.1.151 SERIAL NO: J223AA9

Computer B 192.168.1.155

7/9
VER 1.0 3/8/2006

TEL: +82-31-706-2514 FAX: +82-31-706-2519 Email: dteg@d-teg.com www.d-teg.com

For the Router, Forwarding function is required. Here is an example of Linksys Router. The IP address is http://211.245.254.6 connected with 2 DVR. (Internal IP : 192.168.1.150 , 192.168.1.151 ) Click the Advanced mode and select Forwarding and set like below,

555 666

8/9
VER 1.0 3/8/2006

TEL: +82-31-706-2514 FAX: +82-31-706-2519 Email: dteg@d-teg.com www.d-teg.com

If you intend to watch DVR-A through Internet (computer A above), please follow the next procedure. 1. Enter the IP address (or HOSTNAME.DVRHOST.COM) with port No. (2001) like below,

SRX M1000

To watch the DVR-B follow above steps. 1. Enter the IP address (or HOSTNAME.DVRHOST.COM) with port No. (2002) like below,

SRX M1000

2. Click, ADD TO LIST *Notice: Above Port No. 2001, 2002, 555, 666 are arbitrary Numbers to explain.

9/9
VER 1.0 3/8/2006

Potrebbero piacerti anche