Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
General Specification: Step angle accuracy: 5%(full step, not load) Resistance accuracy: 10% Inductance accuracy: 20% Temperature rise: 80 Max Ambient temperature: -20~+50 Insulation resistance:100M Min,500VDC Insulation strength: 500VAC for one minute Datasheet 23HS2430 (NEMA 23) Shaft diameter: 8mm Step angle: 1,8 Motor length: 112 mm Rated current: 3 A Phase resistance 1,6 Phase inductance 1,6 mH Holding torque: 425 oz (280 Ncm / 28 kgcm) Detent torque: 12 Ncm 2 Rotor inertia: 800 gcm Lead wire: 4 Motor weight: 1660 g
Elektronika
Stepper Motor Driver 2M542 High performance, cost-effective Supply voltage up to +50 VDC Output current up to 4.2A Self-adjustment technology Pure-sinusoidal current control technology Pulse input frequency up to 200 KHz TTL compatible and optically isolated input Automatic idle-current reduction 15 selectable resolutions in decimal and binary, up to 25,000 steps/rev Suitable for 2-phase motors Support PUL/DIR and CW/CCW modes Short-voltage, over-voltage, over-current protections Parameters Output current: 1 A 4,2 A (3,0 RMS) Supply voltage: +24 V - +50 V Logic signal current: 7 - 16 mA
Napajanje
Features Auto on/off cooling fan High efficiency Low temperature LED indicator for power on Over Load and Short Circuit Protection Over Voltage Protection Specifications Output: DC Voltage: 36V Rated Current: 10A Current Range: 0-10A Rated Power: 360W Ripple & Noise (maximun): 200mV Voltage Adjustable Range: 32-40 Voltage Tolerance: 2.0% Line Regulation: 0.5% Load Regulation: 0.5% Setup, Rise, Hold Up Time: 200ms, 50ms, 20ms at full load Input: Voltage Range: 90-132V AC / 180-264V AC by Switch 248-370V Frequency Range: 47-63Hz Efficiency: 82% AC Current: 6.5A/115V 4A/230V Inrush Current: 25A/115V 50A/230V Leakage Current: <3.5mA/240VAC Others: Over Voltage Protection: 33.7-39V Working Temperature & Humidity: -10+5020%90%RH Storage Temperature & Humidity: -20+85,10%95%%RH Temperature Coefficient: 0.03%(050) Vibration: 10500Hz, 2G 10min/1cycle, 60min along each axes Size: 215*115*50mm Brand New
Mehanika
Matica sa trapeznim nav. M 16x4x36xL24 Navoj: trapezni Promjer: 16.0 Materijal: 4-5