Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Side panels (p.15-16) Side panels can be popped out by hand in order to remove the front seat without completely removing the side panels.
To completely remove the panels, remove the front bolt and pull straight out.
Front seat (p.15-8) After popping out the rear of the side panels or removing them completely, remove the two bolts holding the seat on. (one per side)
Rear seat (p.15-8) Insert ignition key into seat lock and turn to disengage the seat latch.
Lower fairings (p.15-9) Remove the three bolts at the front and one at the rear.
Pry out center of lower front pop rivet and remove the small pop rivet joining the lower fairing to the lower center fairing.
Lower inner fairing (p.15-9) Separate top of fairing from rubber grommet on radiator. Separate sides of fairing from center fairings making sure not to loose the rubber nuts.
Upper inner fairings (p.15-13) Remove the two pop rivets and front and rear bolts
Separate top of fairing from the rubber nut attached to the windshield
Upper fairing assy (p.15-10) Disconnect the headlight and city light lead connectors (and canister on California models)
10
11
Remove mirrors
12
Remove bolt and pull sides of center fairing out to clear projections.
The top black plastic section along with the headlight assembly will be removed with the fairings. Rotate the side pieces down slightly to help remove them. Be sure to clear the projections from both segments of fairing.
13
Fairing covers (p.15-15) Remove the bolts holding the fairing cover to the frame.
14
15
Headlight removal (p.16-50) Remove four remaining headlight bolts. Make sure you dont loose the wiring harness clips on the lower two bolts.
16
17
Center fairing removal (p.15-11) Remove three pop rivets and one turn signal bolt per side.
18
To separate the rest of the fairing sections remove the remaining fasteners.
19
20
21
Pull sides out clearing the clips along the bottom edge.
22
23