Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
10 AMPERE DARLINGTON COMPLEMENTARY SILICON POWER TRANSISTORS 60100 VOLTS, 125 WATTS
MAXIMUM RATINGS
Rating Collector Emitter Voltage Collector Base Voltage Emitter Base Voltage Collector Current Continuous Peak (Note 1) Base Current Continuous Total Power Dissipation @ TC = 25_C Operating and Storage Junction Temperature Range Symbol VCEO VCB VEB IC 10 15 IB PD TJ, Tstg 0.5 125 65 to +150 Adc W _C TIP140 TIP145 60 60 TIP141 TIP146 80 80 5.0 TIP142 TIP147 100 100 Unit Vdc Vdc Vdc Adc
MARKING DIAGRAM
AYWWG TIP14x
THERMAL CHARACTERISTICS
Characteristic Thermal Resistance, JunctiontoCase Thermal Resistance, JunctiontoAmbient Symbol RqJC RqJA Max 1.0 35.7 Unit C/W C/W A Y WW TIP14x x G = Assembly Location = Year = Work Week = Device Code = 0, 1, 2, 5, 6, or 7 = PbFree Package
Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. 1. 5 ms, v 10% Duty Cycle.
ORDERING INFORMATION
See detailed ordering and shipping information in the package dimensions section on page 2 of this data sheet.
*For additional information on our PbFree strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.
Semiconductor Components Industries, LLC, 2005
Preferred devices are recommended choices for future use and best overall value.
COLLECTOR
COLLECTOR
8.0 k
40
8.0 k
40
EMITTER
EMITTER
ORDERING INFORMATION
Device TIP140 TIP140G TIP141 TIP141G TIP142 TIP142G TIP145 TIP145G TIP146 TIP146G TIP147 TIP147G Package SOT93 (TO218) SOT93 (TO218) (PbFree) SOT93 (TO218) SOT93 (TO218) (PbFree) SOT93 (TO218) SOT93 (TO218) (PbFree) SOT93 (TO218) SOT93 (TO218) (PbFree) SOT93 (TO218) SOT93 (TO218) (PbFree) SOT93 (TO218) SOT93 (TO218) (PbFree) Shipping 30 Units / Rail 30 Units / Rail 30 Units / Rail 30 Units / Rail 30 Units / Rail 30 Units / Rail 30 Units / Rail 30 Units / Rail 30 Units / Rail 30 Units / Rail 30 Units / Rail 30 Units / Rail
http://onsemi.com
2
t, TIME ( s)
ELECTRICAL CHARACTERISTICS (TC = 25_C unless otherwise noted)
Characteristic OFF CHARACTERISTICS Symbol Min Typ Max Unit CollectorEmitter Sustaining Voltage (Note 2) (IC = 30 mA, IB = 0) VCEO(sus) Vdc TIP140, TIP145 TIP141, TIP146 TIP142, TIP147 60 80 100 Collector Cutoff Current (VCE = 30 Vdc, IB = 0) (VCE = 40 Vdc, IB = 0) (VCE = 50 Vdc, IB = 0) Collector Cutoff Current (VCB = 60 V, IE = 0) (VCB = 80 V, IE = 0) (VCB = 100 V, IE = 0) ICEO mA TIP140, TIP145 TIP141, TIP146 TIP142, TIP147 2.0 2.0 2.0 ICBO mA TIP140, TIP145 TIP141, TIP146 TIP142, TIP147 1.0 1.0 1.0 Emitter Cutoff Current (VBE = 5.0 V) IEBO 20 mA ON CHARACTERISTICS (Note 2) DC Current Gain (IC = 5.0 A, VCE = 4.0 V) (IC = 10 A, VCE = 4.0 V) hFE 1000 500 CollectorEmitter Saturation Voltage (IC = 5.0 A, IB = 10 mA) (IC = 10 A, IB = 40 mA) BaseEmitter Saturation Voltage (IC = 10 A, IB = 40 mA) BaseEmitter On Voltage (IC = 10 A, VCE = 4.0 Vdc) VCE(sat) Vdc 2.0 3.0 3.5 3.0 VBE(sat) VBE(on) Vdc Vdc SWITCHING CHARACTERISTICS Resistive Load (See Figure 1) Delay Time Rise Time td tr 0.15 0.55 2.5 2.5 ms ms ms ms Storage Time Fall Time (VCC = 30 V, IC = 5.0 A, IB = 20 mA, Duty Cycle v 2.0%, IB1 = IB2, RC & RB Varied, TJ = 25_C) ts tf 2. Pulse Test: Pulse Width = 300 ms, Duty Cycle v 2.0%. 10 RB & RC VARIED TO OBTAIN DESIRED CURRENT LEVELS 30 V D1, MUST BE FAST RECOVERY TYPE, eg: 1N5825 USED ABOVE IB 100 mA RC SCOPE MSD6100 USED BELOW IB 100 mA
TUT V2 approx +12 V 0 V1 appox. 8.0 V tr, tf 10 ns DUTY CYCLE = 1.0% 51 RB D1 +4.0 V 25 ms
for td and tr, D1 is disconnected and V2 = 0
VCC
PNP NPN
8.0 k
40
0.5
http://onsemi.com
3
2000
VCE = 4.0 V 1.0 2.0 3.0 4.0 5.0 IC, COLLECTOR CURRENT (AMPS)
5.0
5.0
3.0 2.0
IC = 10 A, IB = 4.0 mA
IC = 5.0 A, IB = 10 mA 1.0 IC = 1.0 A, IB = 2.0 mA 0.7 0.5 75 50 25 0 25 50 75 100 125 150 175
100
125
150
175
4.0 3.6 3.2 2.8 2.4 IC = 10 A 2.0 1.6 1.2 0.8 75 25 25 75 125 5.0 A 1.0 A 175 VCE = 4.0 V
http://onsemi.com
4
20 IC, COLLECTOR CURRENT (AMP) (mA) 10 7.0 5.0 3.0 2.0 1.0 dc TJ = 150C SECONDARY BREAKDOWN LIMIT BONDING WIRE LIMIT THERMAL LIMITATION @ TC = 25C TIP140, 145 TIP141, 146 TIP142, 147 15 20 70 30 50 VCE, COLLECTOREMITTER VOLTAGE (VOLTS) IC, COLLECTOR CURRENT (AMPS) 15 10 7.0 5.0 100 mJ
2.0
0.2 10
1.0 100 0.5 1.0 2.0 5.0 10 20 L, UNCLAMPED INDUCTIVE LOAD (mH) 50 100
VCE MONITOR MPSU52 RBB1 INPUT 50 50 1.5 k RBB2 = 100 VBB2 = 0 VBB1 = 10 V 100 mH TUT VCC = 20 V IC MONITOR RS = 0.1
TEST CIRCUIT
NOTE 1: Input pulse width is increased until ICM = 1.42 A. NOTE 2: For NPN test circuit reverse polarities.
http://onsemi.com
5
2.0
7.0
10
Figure 9. Magnitude of Common Emitter SmallSignal ShortCircuit Forward Current Transfer Ratio
4.0
3.0
2.0
http://onsemi.com
6
C B Q E
NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. MILLIMETERS MIN MAX 20.35 14.70 15.20 4.70 4.90 1.10 1.30 1.17 1.37 5.40 5.55 2.00 3.00 0.50 0.78 31.00 REF 16.20 4.00 4.10 17.80 18.20 4.00 REF 1.75 REF BASE COLLECTOR EMITTER COLLECTOR INCHES MIN MAX 0.801 0.579 0.598 0.185 0.193 0.043 0.051 0.046 0.054 0.213 0.219 0.079 0.118 0.020 0.031 1.220 REF 0.638 0.158 0.161 0.701 0.717 0.157 REF 0.069
U S K L
1 2
A
3
D V G
J H
DIM A B C D E G H J K L Q S U V
STYLE 1: PIN 1. 2. 3. 4.
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Typical parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customers technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
http://onsemi.com
7
TIP140/D