Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
10-Device Universal Remote with Learning Control Remoto Universal de 10 Dispositivos con Aprendizaje
OFA 10L with Learning Owners Manual.fm Page 1 Thursday, January 27, 2005 1:34 PM
OWNERS MANUAL
TABLE OF CONTENTS
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Features and Functions . . . . . . . . . . . . . . . . . . . . . . .2 Key Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Device Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Installing Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Setting Up Your Components . . . . . . . . . . . . . . . . . . .7 Programming Combo Device Control . . . . . . . . . . . . .8 Searching for Your Code. . . . . . . . . . . . . . . . . . . . . . .9 Checking the Codes . . . . . . . . . . . . . . . . . . . . . . . . . .9 Using Macros. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 Programming a Favorite Channel . . . . . . . . . . . .10 Programming a Master Power Macro . . . . . . . . .10 To Program the Master Power Macro. . . . . . .10 To Operate Master Power Macro . . . . . . . . . .11 Programming a Macro on a Device Key . . . . . . .11 To Program the Device Key Macro . . . . . . . . .11 To Operate the Device Key Macro. . . . . . . . . .11 Clearing a Macro . . . . . . . . . . . . . . . . . . . . . . . . .11 Using Channel Scan . . . . . . . . . . . . . . . . . . . . . . . . .12 Programming Favorite Channel Scan. . . . . . . . . . . .12 Using Learning . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Learning Precautions. . . . . . . . . . . . . . . . . . . . . .12 Programming a Learning Key . . . . . . . . . . . . . . .13 Deleting Functions from the Learning Keys . . . .13 Re-assigning Device Keys. . . . . . . . . . . . . . . . . . . . .14 Using Keymover. . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 Programming Keymover . . . . . . . . . . . . . . . . . . .15 Restoring Keymoved Keys to Default Settings. . .15 Restoring a Single Keymoved Key . . . . . . . . .15 Restoring All Keymoved Keys in a Single Mode . 15 Changing Volume Lock . . . . . . . . . . . . . . . . . . . . . . .15 Locking Volume Control to One Mode (Global Volume Lock) . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 Unlocking Volume Control for a Single Device (Individual Volume Unlock) . . . . . . . . . . . . . . . . .16 Unlocking All Volume Control (Restoring Default Setting). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 Restoring Factory Default Settings . . . . . . . . . . . . .16 About Upgrading . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 Upgrade Exclusions . . . . . . . . . . . . . . . . . . . . . . .17 Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 FCC Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 Limited Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . .19 Manufacturers Codes (Cdigos del Fabricante) . . .43 Setup Codes for Audio Amplifiers (Cdigos de Configuracin para Amplificadores de Audio) . .43 Setup Codes for Cable Converters (Cdigos de Configuracin para Cajas/Convertidores de Cable) 43
Setup Codes for Cable/PVR/DVR Combos (Cdigos de Configuracin para Aparatos Combinados Cajas/Convertidores de Cable/PVR/DVR). . . . . . 45 Setup Codes for CD Players (Cdigos de Configuracin para Reproductores de CDs) . . . 45 Setup Codes for CD-Rs (Cdigos de Configuracin para Reproductores de CD-Rs) . . . . . . . . . . . . . 46 Setup Codes for Home Automation (Cdigos de Configuracin para la Automatizacin del Hogar) 46 Setup Codes for Miscellaneous Audio (Cdigos de Configuracin para Componentes Variados de Audio) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Setup Codes for Video Accessories (Cdigos de Configuracin para Accesorios de Vdeo) . . . . . 47 Setup Codes for HDTV Decoders (Cdigos de Configuracin para Decodificadores de Alta Definicin (HDTV)). . . . . . . . . . . . . . . . . . . . . . . . 48 Setup Codes for Audio Amp/Tuners (Cdigos de Configuracin para Amplificadores de Audio/ Sintonizadores). . . . . . . . . . . . . . . . . . . . . . . . . . 48 Setup Codes for Satellite Receivers (Cdigos de Configuracin para Receptores de Satlite) . . . 50 Setup Codes for DBS/PVR/DVR Combos (Cdigos de Configuracin para Aparatos Combinados DBS/ PVR/DVR). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Setup Codes for TVs (Cdigos de Configuracin para Televisores) . . . . . . . . . . . . . . . . . . . . . . . . 51 Setup Codes for TV/VCR Player Combos (Cdigos de Configuracin para Aparatos Combinados TV/ VCR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 Setup Codes for TV/DVD Player Combos (Cdigos de Configuracin para Aparatos Combinados TV/ DVD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 Setup Codes for TV/VCR/DVD Player Combos (Cdigos de Configuracin para Aparatos Combinados TV/VCR/DVD). . . . . . . . . . . . . . . . . . 55 Setup Codes for VCRs (Cdigos de Configuracin para Videograbadoras). . . . . . . . . . . . . . . . . . . . 56 Setup Codes for DVD/PVR/DVR Combos (Cdigos de Configuracin para Aparatos Combinados DVD/ PVR/DVR). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Setup Codes for DVD/VCR Combos (Cdigos de Configuracin para Aparatos Combinados DVD/ Videograbadora). . . . . . . . . . . . . . . . . . . . . . . . . 58 Setup Codes for PVR/DVRs (Cdigos de Configuracin para PVR/DVRs, Grabadores Personales en Disco Duro). . . . . . . . . . . . . . . . . 58 Setup Codes for DVD Players (Cdigos de Configuracin para Reproductores DVD). . . . . . 59 Setup Codes for Home-Theatre-in-a-Box (HTiB) (Cdigos de Configuracin para Dispositivo Sistema de Teatro en Casa) . . . . . . . . . . . . . . . . 61
Table of Contents
OFA 10L with Learning Owners Manual.fm Page 2 Thursday, January 27, 2005 1:34 PM
INTRODUCTION
The One For All 10L Universal Remote Control with Learning (URC-10820 B00) is pre-programmed with the latest library of codes, and it is designed to operate up to ten home entertainment devices, including TV, video, DVD, Cable, Satellite and audio components. The remote control requires four (4) new AAA alkaline batteries (not included) and easy programming to control your devices. For best results, please read and perform all instructions listed here. Also, keep these instructions for future reference.
Introduction
OFA 10L with Learning Owners Manual.fm Page 3 Thursday, January 27, 2005 1:34 PM
OWNERS MANUAL
KEY CHARTS
The LED (red light), which is located underneath the POWER Key, blinks to show that the remote control is working and is sending signals. Press TV, CBL, SAT, VCR, DVD, CD, PVR, AUD, AUX1 or AUX2 once to select a desired home entertainment device to control. Press POWER once to turn on or off the selected device. For master power control, see Programming a Master Power Macro on page 10. Press MENU once to display your selected devices main menu. Use GUIDE to display your selected devices program guide or setup menu. Use EXIT to exit from your selected devices guide or menu. Use INFO to display the current channel and program information. Use the Cursor Keys to move the cursor in the program guide and menu screens. Use OK to choose options from your selected devices menu or guide. In the RCVR/AMP mode, use OK to set the surround sound.Use (or ) to adjust the volume higher (or lower).Use (or ) to adjust the balance left (or right). Use VOL + (or VOL -) to raise (or lower) the sound volume.
Press MUTE once to turn the sound off or on. In TV, VCR, DVD, CBL, or SAT modes, use FAV to scan favorite channels and/or all channels. (See Using Channel Scan on page 12 and Programming Favorite Channel Scan on page 12.)
OFA 10L with Learning Owners Manual.fm Page 4 Thursday, January 27, 2005 1:34 PM
Press PREV once to recall the last-viewed channel and to page back one screen on the main menu. In the AUD, DVD and CD modes, use DISC to change disk (if available on your device). Use the keypad (1 ~ 9 and 0) to directly select channels (e.g., 009 or 031). In the AUD mode, use the keypad (1 ~ 9 and 0) to select audio sources 1 through 10. Press ENTER once after entering the channel numbers on some TVs. In the CD mode, use ENTER to add 10 to the digit entry (e.g., ENTER and 7 is 17). Use INPUT to switch the TV's input to view TV or video programs.
OFA 10L with Learning Owners Manual.fm Page 5 Thursday, January 27, 2005 1:34 PM
OWNERS MANUAL
Press SLEEP to activate your device's sleep timer (not available for all devices). Use CC to turn on closed caption or subtitles. If you have a PVR/DVR device, use SHOWS to access your list of recorded shows. Use FORMAT to change the Aspect Ratio of your display (16:9). If you have a PVR/DVR device, use LIVE to return to live programming. Use +100 if your device requires this key to access channels greater than 100 (same as your original device). Use the (-) function to access your High Definition Channels (e.g., if your HD channel is 2.5, press 2 (-) 5). Use SET for all programming sequences. (URC-10820 B00) will be able to control the following types of devices: DEVICE KEY CONTROLS THESE DEVICES TV (including HDTV, Plasma and LCD), TV/ DVD Combo, TV/VCR Combo Satellite, Satellite/PVR/ DVR, Video Accessories (Including Media Center PCs) Cable, Cable/PVR/DVR, Video Accessories (Including Media Center PCs) VCR, DVD, DVD/R, HTIB, DVD/VCR DVD, VCR, DVD/R, HTIB, DVD/VCR CD, Home Automation, CD/R (Recorders) PVR/DVR Only Devices
Tuner, Amp, Misc. Audio, HTIB (Home Theater In A Box) Tuner, Amp, Misc. Audio, HTIB (Home Theater In A Box) Media Center PCs, Satellite, Satellite/PVR/ DVR, Cable, Cable/PVR/ DVR, Video Accessories
DEVICE TABLE
NOTE: Please refer to the table to the right when performing the instructions in Setting Up Your Components on page 7. After programming, the One For All 10L Universal Remote Control with Learning
OFA 10L with Learning Owners Manual.fm Page 6 Thursday, January 27, 2005 1:34 PM
INSTALLING BATTERIES
1. On the remote control's back, push down on the top of the battery cover (where indicated by the arrows). Then slide the battery cover out.
2.
Obtain four (4) new AAA alkaline batteries. Match the + and marks on the batteries to the + and marks in the battery case, then insert the new batteries.
3.
Slide the battery cover back into place. The tab should click when the cover is locked.
Installing Batteries
OFA 10L with Learning Owners Manual.fm Page 7 Thursday, January 27, 2005 1:34 PM
OWNERS MANUAL
4. Test the remote control by first pressing POWER and then any mode key (e.g., TV). If the batteries are inserted correctly, the LED (red light) will blink once. (Home theater in a box), or a tuner. Use the AUX2 key to program control of a Media Center PC (with IR receiver). Alternately, use the AUX1 or AUX2 key to program control of a second device type (e.g., a second VCR; see Re-assigning Device Keys on page 14). 3. 4. Press and hold SET until the LED (red light) blinks twice, then release SET. Use the Manufacturers Codes (Cdigos del Fabricante) (starting on page 43) to locate the type of device and brand name and then enter the first four-digit code for your device. If performed correctly, the LED will blink twice.
NOTE: When batteries are low, the remote control will blink 5 times after each key press. The remote will stop operating when the batteries need replacement. The permanent memory retention ensures that your codes are stored permanently even during battery replacement.
NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter the same code again. 5. Aim the remote control at the device and press POWER once. The device should turn off. If it does not, repeat steps 2 through 5, trying each code for your brand until you find one that works. If it still doesnt work, try Searching for Your Code on page 9.
NOTE: If the device does not have a POWER key, press the 6. (PLAY) key.
Repeat steps 1 through 5 for each device you want to control. For future reference, write down each working device code in the following boxes:
NOTE: Please read steps 2 through 4 completely before proceeding. Highlight or write down the codes and device you wish to program before starting step 2. 2. On the remote control, press a device key once (i.e., TV, CBL, SAT, VCR, DVD, CD, PVR, AUD, AUX1 or AUX2).
TV Code:
NOTE: Use the AUX1 key to program control of an audio device such as an AMP, HTIB
Brand Name:_____________________
OFA 10L with Learning Owners Manual.fm Page 8 Thursday, January 27, 2005 1:34 PM
NOTE: Please read steps 2 through 4 completely before proceeding. Highlight or write down the codes and device you wish to program before starting step 2. 2. 3. On the remote control, press TV. Press and hold SET until the LED (red light) blinks twice, and then release SET. Use the Setup Codes under the TV/ DVD Combos heading (use codes listed as TV Codes) on page 55. Locate the brand name and then enter the first four-digit code for your device. If performed correctly, the LED will blink twice.
OFA 10L with Learning Owners Manual.fm Page 9 Thursday, January 27, 2005 1:34 PM
OWNERS MANUAL
NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter the same code again. 5. Aim the remote control at the device and press POWER once. It should turn off. If the device does not respond, repeat steps 2 through 4, trying each code for your brand until you find one that works. If it still does not work, try Searching for Your Code, below. performed the Test Function, you can go back by pressing CH-. 6. 7. To lock in the code, press and release the SET key. The LED blinks twice. To search for the codes of your other devices, repeat steps 1 through 6, but substitute the appropriate device key for the device you are searching for in step 1.
NOTE: The keys that can be used for the test function are 0, 1, 2, 3, POWER, VOL +, Play, Stop and Mute. 5. Press CH+ to begin searching for your code. Stop the search when the device turns off or performs the function selected in step 4 (if other than POWER).
NOTE: If a code digit is 0, the LED will not blink. 5. Repeat step 4 three more times for remaining digits. Use 2 for the second digit, 3 for the third digit, and 4 for the fourth digit. Write down the code digits in the remaining TV code boxes on page 7. To check for codes of other devices, repeat steps 1 through 5, but substitute the appropriate device key for each device you are checking. Write down the devices code digits in the appropriate code boxes on page 7.
6.
NOTE: In the search mode, the remote control will send IR codes from its library to the selected device, starting with the most popular code first. Every press of CH+ will send a new code. If you go past the code that
OFA 10L with Learning Owners Manual.fm Page 10 Thursday, January 27, 2005 1:34 PM
USING MACROS
You can program the M1 ~ M3 keys on your One For All 10L Universal Remote Control with Learning (URC-10820 B00) to perform repetitive, time-consuming operations for easy, convenient access through the press of a single key. Macro keys are ideal for home theater operations, setting a favorite channel, guide steps, or other multiple functions you would like to control with one key press. Moreover, each macro key can hold up to a total of 20 key presses. NOTE: Programming a new macro over an existing one will erase the original macro.
the channel, also press ENTER after the channel number (e.g., 0 5 2 ENTER). NOTE: You can program up to 20 functions on the macro keys. 6. Press and hold SET until the LED blinks twice, then release SET.
Now when you press M1, you will instantly see cable channel 52 on your TV set.
5.
6.
7.
NOTE: If you have access to over 100 channels, enter 0 5 2. Moreover, if the original remote control requires you to press ENTER to change
8.
10 Using Macros
OFA 10L with Learning Owners Manual.fm Page 11 Thursday, January 27, 2005 1:34 PM
OWNERS MANUAL
To Operate Master Power Macro 1. After programming, point the remote control at the devices and press POWER for at least 2 seconds to sequentially turn on (or off) your devices. NOTE: When you press POWER for less than 2 seconds, a power command will only be sent to the currently-selected device. This allows you to still individually power devices on or off. 2. Devices will turn on (or off) according to your programmed sequence. 1. 2. 3. 4. 5. 6. Press and hold SET until the LED (red light) blinks twice, then release SET. Enter 9 9 5. The LED will blink twice. Press the DVD key once. Press the AUD key (to select the receiver). Press digit 3 (for the input), and press DVD (to return control to the DVD key). To save the settings and exit the program, press and hold SET until the LED blinks twice, then release SET.
NOTE: The currently-selected device will always turn on or off first, followed by the remaining programmed sequence. After the master power sequence has been completed, the remote control will be set to control the first powered-on device. NOTE: If one or more devices does not have a POWER key, the power off/on sequence may be slightly delayed when the remote control signals the device(s).This action is normal.
NOTE: You can program up to 20 functions on the Device Key Macro. You can program a device Key Macro onto any device key. To Operate the Device Key Macro 1. After programming, point the remote control at the receiver and press the DVD key for at least 2 seconds. This will switch the Receiver's input to input 3, to allow you to view the DVD. NOTE: When you press the device key (e.g., DVD) for less than 2 seconds, the remote will only select the DVD mode but will not change the Input on the receiver. This allows you to still change modes while using the remote. NOTE: After executing the Device Key Macro, the remote will return to the DVD mode, to allow the control of the DVD device.
CLEARING A MACRO
1. 2. 3. Press and hold SET until the LED (red light) blinks twice, then release SET. Enter 9 9 5. The LED will blink twice. Select a macro key (e.g., M1, M2, M3 POWER or any device key) you want to clear and press it once.
Using Macros 11
OFA 10L with Learning Owners Manual.fm Page 12 Thursday, January 27, 2005 1:34 PM
NOTE: If the original remote control required pressing an ENTER key to change the channel, also press the ENTER key after the channel number (e.g., 0 3 1 ENTER). 5. If desired, repeat step 4 (in this section) for each favorite channel to be stored, up to a total of 10 channels.
NOTE: If you try entering more than 10 channels, the remote control will automatically exit programming. 6. To exit programming, press and hold SET for 3 seconds. The LED will blink twice.
USING LEARNING
The One For All 10L Universal Remote Control with Learning (URC-10820 B00) includes a Learning feature so you can add functions that are unique to your home entertainment devices (e.g., DVD EJECT) on the L1 ~ L3 keys. However, there are some considerations.
3.
LEARNING PRECAUTIONS
Your original remote controls must be in working order for learning to work properly.
OFA 10L with Learning Owners Manual.fm Page 13 Thursday, January 27, 2005 1:34 PM
OWNERS MANUAL
Learned keys are mode specific, so each one can store a unique function for each mode. Learned keys can be used in macros (see Using Macros on page 10). Do not use the following keys for learning: Device Keys, SETUP, FAV, or Record () Key. Learning capacity is approximately 50 to 70 keys, depending on the code being learned. If both learned and keymoved functions are assigned to the same key, the last programmed function is stored. A learned function cannot be used as a source for Keymover (see Using Keymover on page 14). Certain device codes are not learnable including multi-frequency types, some high frequency ones, and other unusual formats. For optimum learning, avoid high levels of ambient light such as natural sunlight or energy-efficient fluorescent lights. 5. 4. Press the desired key once (e.g., L1) to store a feature to be learned. The LED will turn on and remain on for 5 seconds. If the LED does not turn on, go back to step 1 and start again. Place your original remote control (e.g., TV remote control) head-to-head (about 2" apart) from the One For All 10L Universal Remote Control with Learning (URC-10820 B00). On your original remote control, press and hold the key (i.e., feature) to be learned until the LED on the One For All 10L Universal Remote Control with Learning (URC-10820 B00) turns off and then blinks twice. If the LED does not blink twice, repeat steps 3 through 6. To learn functions onto other learning keys (e.g., L2 and L3), repeat steps 3 through 6. To lock in new feature(s) on the One For All 10L Universal Remote Control with Learning (URC-10820 B00), press and hold SET until the LED blinks twice, then release SET. To test a learned feature, press a device key (e.g., TV) once where the learning mode was assigned. Then press the learning key (e.g., L1) where the learned feature is stored.
6.
7.
8.
9.
NOTE: Please have your original remote controls handy before programming learning. Be sure to press each teaching key within 5 seconds of the previous entry. Otherwise, the One For All 10L Universal Remote Control with Learning (URC-10820 B00) exits the learning mode.
Using Learning 13
OFA 10L with Learning Owners Manual.fm Page 14 Thursday, January 27, 2005 1:34 PM
5.
2. 3. 4.
To re-assign other device keys to the AUX1 key, repeat steps 1 through 4 by substituting the sequence from the following chart:
You can also re-assign another unused device key by substituting an open key for the AUX1 key in the above chart and performing the sequence. For example, to re-assign an unused CBL key as a 2nd CD key, perform SET - 9 - 9 - 2 - CD CBL. When a re-assignment is done, the LED (red light) will blink twice to confirm your choice. At that time, you will need to program the remote control for the new device (see Setting Up Your Components on page 7).
USING KEYMOVER
The One For All 10L Universal Remote Control with Learning (URC-10820 B00) includes a Keymover feature that allows you to map (or copy) keys from one mode (i.e., source mode) to another mode (i.e., destination mode).
OFA 10L with Learning Owners Manual.fm Page 15 Thursday, January 27, 2005 1:34 PM
OWNERS MANUAL
NOTE: The following keys cannot be used as a source or destination: TV, CBL, SAT, VCR, DVD, CD, PVR, AUD, AUX1, AUX2, FAV, and SET. 4. Press the destination key twice (where the keymoved key is stored). The LED will blink twice.
PROGRAMMING KEYMOVER
For example, if your VCR does not have volume control, you can map those keys (i.e., VOL +, VOL -, and MUTE) from the TV mode to the VCR mode as follows: 1. 2. 3. 4. 5. 6. 7. 8. Press and hold SET until the LED (red light) blinks twice, then release SET. Enter 9 9 4. The LED will blink twice. For the source mode, press TV once. For the source key, press VOL + once. For the destination mode, press VCR once. For the destination key, press VOL + once. The LED will blink twice, indicating the keymoved sequence is correct. Repeat steps 1 through 7 twice more to map remaining volume control keys, substituting VOL - and MUTE as source and destination keys in steps 4 and 6.
Restoring All Keymoved Keys in a Single Mode 1. Press and hold SET until the LED (red light) blinks twice, then release SET. 2. 3. Enter 9 9 4. The LED will blink twice. Press the destination mode twice (where keymoved keys are stored). The LED will blink twice.
Upon completion of the above procedure, you can now use your One For All 10L Universal Remote Control with Learning (URC-10820 B00) to control the TVs volume and MUTE in the VCR mode, as well as in the TV mode.
OFA 10L with Learning Owners Manual.fm Page 16 Thursday, January 27, 2005 1:34 PM
2. 3. 4.
5.
2. 3.
ABOUT UPGRADING
The One For All 10L Universal Remote Control with Learning (URC-10820 B00) has the largest infrared code library available. However, if you purchase a brand new home entertainment or home automation device, it may not respond to the codes stored in the remote control's memory. If this happens, please contact our Customer Support department (see Troubleshooting on page 17) to upgrade the remote control. The Customer Support representative will search our entire database for a code that matches your device and instruct you how to enter it into your One For All 10L Universal Remote Control with Learning (URC-10820 B00).
2. 3.
OFA 10L with Learning Owners Manual.fm Page 17 Thursday, January 27, 2005 1:34 PM
OWNERS MANUAL
If the code for your home entertainment or home automation device is not in our database, we will need to capture the code for that device from its original remote control. A new code would then be created and entered into your One For All 10L Universal Remote Control with Learning (URC-10820 B00). If necessary, the Customer Support representative can instruct you how to begin the capture procedure. NOTE: One For All reserves the right to replace a returned remote control with a new one of equal or superior functionality.
TROUBLESHOOTING
PROBLEM: LED (red light) does not blink when you press a key. Replace batteries with four new AAA alkaline batteries. LED (red light) blinks five times after you press a key. Replace batteries with four new AAA alkaline batteries. LED blinks when you press a key, but home entertainment device does not respond. Make sure the remote control is aimed at your home entertainment device and is not farther than 15 feet away. The unit does not control home entertainment devices or commands are not working properly. Try all listed codes for the device brands being set up. Make sure they can be operated with an infrared remote control. TV/VCR Combo does not respond properly. Use the VCR codes for your brand. Some combo units may require both a TV code and a VCR code for full operation.
SOLUTION:
PROBLEM: SOLUTION:
UPGRADE EXCLUSIONS
Home entertainment or home automation devices controlled by radio frequency (RF/UHF), wired, or ultrasonic remote controls. Only devices controlled by infrared remote controls are covered. Home entertainment or home automation devices not controlled by remote controls. Broken or defective product. Products that operate over 100 kHz. Infrared keyboards and infrared pointing devices (such as mouse substitutes). All products for sale and/or use outside the continental United States, Hawaii, Alaska, or Canada.
PROBLEM:
SOLUTION:
PROBLEM:
SOLUTION:
PROBLEM: SOLUTION:
Troubleshooting 17
OFA 10L with Learning Owners Manual.fm Page 18 Thursday, January 27, 2005 1:34 PM
PROBLEM: SOLUTION:
PROBLEM:
PROBLEM: SOLUTION:
SOLUTION:
PROBLEM:
SOLUTION:
FCC COMPLIANCE
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide a reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiated radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PROBLEM:
18 FCC Compliance
OFA 10L with Learning Owners Manual.fm Page 19 Thursday, January 27, 2005 1:34 PM
OWNERS MANUAL
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet or a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. commercial use, or that is attributable to acts of God. There are no express warranties except as listed above. ONE FOR ALL SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE WARRANTY PERIOD SET FORTH ABOVE. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above exclusions or limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. To obtain warranty service for a defective product during the warranty period, please return the product, preferably in the original carton, along with your purchase receipt, to the store of original purchase. A note detailing the complaint would be helpful. The store, at its option, will replace or repair this product if found to be defective. One For All: (330) 405-8655
LIMITED WARRANTY
One For All warrants, to the original purchaser only, that this product will be free from defects in materials and workmanship, under normal use, for ninety (90) days from the date of original purchase. This limited warranty is valid only on ONE FOR ALL product purchased and used in the United States of America or Canada, and does not apply to products used for industrial or commercial purpose. The limited warranty does not cover damage or failure caused by products or services not supplied by ONE FOR ALL, or which result from accident, misuse, abuse, neglect, mishandling, misapplication, faulty installation, set-up adjustment, improper maintenance, alteration, maladjustment of consumer controls, modifications,
ADDITIONAL INFORMATION
As you update your home entertainment system, One For All has a universal remote control that will fit your needs. Please visit our Website at WWW.Oneforall.com to see our full product lineup. ONE FOR ALL is the registered trademark of Universal Electronics Inc. Computime
Limited Warranty 19
OFA 10L with Learning Owners Manual.fm Page 20 Thursday, January 27, 2005 1:34 PM
20 Additional Information