Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
1 a) b) c) d) e) f) g) i. ii. h) i) j) i. ii. k) l) m) n) 2 a) i. ii. iii. iv. v. b) i. ii. c) i. ii. GENERAL Name of the Manufacturer Country of Manufacture Type of Circuit Breaker Manufacturer's type designation Standard applicable Rated Voltage Rated Current under normal condition at 40 degree C ambient under site condition at 50 degree C ambient Rated Frequency Number of poles Whether gang operated Electrically Mechanically Whether dead tank or live tank Type of installation Number of breaks per pole Latching current GUARANTEED RATINGS Rated short circuit breaking currents Symmetrical component at rated voltage DC component Asymmetrical breaking current at rated voltage Rated symmetrical breaking capacity Rated asymmetrical breaking capacity Rated short circuit making current OR Short circuit peak withstand current at higher rated voltage at lower rated voltage Break time Rated Break time Maximum total break time under any duty condition for any current up to rated breaking current with limiting conditions of voltage and pressure Rated Closing time Rated Opening time Rated maximum Opening time under any condition with limiting voltage and pressure Rated Arcing time First pole to clear factor Rated Close open time Rated Short-time withstand current 1 second 3 second Rated operating duty Unit Crompton Greaves Ltd India SF6 Gas Insulated 120-SFM-32B IEC-62271-100 / IS 13118 145 Upto 3150 Upto 3150 50 / 60 3 Yes Yes Live tank Outddor 1 100
kV (rms) A A Hz No.
No kAp
kA % kA MVA MVA
kA (peak) kA (peak) ms ms ms ms ms ms ms kA kA
100 100 </=60 </=60 </=130 </=30 </=34 </=30 1.5 </=40 ms 40 40 O-0.3s-CO-3min-CO L90 & L75 As per IEC-62271-100
d) e) f) g) h) i) j) i. ii. k) l)
m) Rated out-of-phase breaking current OR Rated breaking capacity under asynchronous condition n) Rated line charging breaking current . Rated cable charging breaking current p) Rated single capacitor bank breaking current q) Corresponding over voltage during breaking capacitive current
kA A A A p.u.
A ms, kA
O
315 kA 30, 4 < 55 degree C 110 or 125 or 220,(70 to 110%) 110 or 125 or 220, (85 to 110%) 40
V DC V DC
7; 6 to 7 300 NA 100% 249 2 10 20 1000 3000 60% 266 3 30% 266 5 10% 272 6
ms ms ms
kV (rms) kV (rms)
275 275
i. Between live terminal ii. Between terminal with breaker contacts open & ground c) Creeapage distance i. To earth ii. Across interruptor 4 4.1 a) i. ii. b) c) OPERATING MECHANISM SPRING CHARGNING MECHANISM Type of operating mechanism Closing Opening Type Designation No. of operations possible with stored energy
kV (peak) kV (peak) mm mm
650( on demand 700kVp is available) 650( on demand 700kVp is available) 3625 3625
kg sec.
2.5 Less than 1% per annum 7 6.0 - 7.0 11 20% Partially filled to 0.5 to 1 kg/cm2 dispatched filled with gas for transportation & storage to be topped at site As per IEC-600376
i) j) i. ii.
Parameters of SF6 gas Gas pressure settings at 20OC) Low pressure alarm at Lockout pressure for a) Opening b) Closing GENERAL DIMENSIONS Over all Dimensions Length Width Height Weight of complete breaker for foundation design Weight of each pole Weight of Mechanism + Housing + Base frame Weight of the heaviest part of the breaker Impact loading for foundation design Downwords Upwords
mm mm mm kg kg kg kg kg kg g mm mm mm mm db db
4000 800 5450 1450 335 560 560 2000 2000 0.5 1280 1700 1200 3790 < 140 < 140
Seismic level Minimum clearance in air Between live parts Between phases (Centre to Centre) Live parts to earth Live parts to ground level including plinth of 300 mm j) Noise level distance of i. 0M from the breaker ii. 50 M from the breaker
iv. Marshalling box (Total 1 no) 7 a) b) c) d) e) f) g) h) i) i. ii. k) l) i. ii. m) n) o) p) q) r) s) i. ii. t) u) CONSTRUCTIONAL DETAILS Weight of absorbant per pole Whether arcing contacts are provided Type and material of arcing contacts Type and Material of main contacts Whether main contacts are silver plated / Silver plating thickness Contact pressure on main contacts Length of contact separation Length of contact travel Rate of contact travel Opening Closing Wheather the making & breaking contacts are hermatically sealed No. of spare auxiliary contacts provided for Owner's use Normally Open when breaker is open Normally Closed when breaker is open Rated voltage of auxiliary contacts Type of auxiliary contacts Continuous Current Carrying Capacity DC breaking current with 20 ms time constant Whether auxiliary contacts are sliver plated Finish of exposed ferrous parts Finish paint Offered to Domestic Customer's Offered to International Customer's Finish for Support Structure OR Columns
gm
V DC A A
8/9/10 8/9/10 250 Rotary 20 7.5 A at 264 VDC Yes Hardware are HDG/SS As per customer requirement Shade 631 of IS 5 Shade RAL 7032 Hot Dip Galvanised ARGILONGERMANY/SARVANA(SIL)/LIAONING SHUANGLING/FUSHUN HIGH TECH ELECTRIC/ LILING HUAXIN/LILING PUKOU INSULATORS/PRATHAMESH CERAMICS/IEC/ MODERN
9 a) b) c) d) e) f) g) h) i) i. ii. j) k)
VALIDATED OPERATING CONDITIONS Maximum ambient air temperature Minimum ambient air temperature Maximum relative humidity Wind load / Wind velocity Seismic Level Altitude Maximum annual rain fall Average thunder storms days per year Maximum DC supply voltage variation Closing Opening Maximum AC supply voltage variation Degree of pollution as per IEC 815
O O
C C %
50 -20 100% 0.5 1000 3000 80 +/-20 -30, +20 +/-10 CL-III, Heavily polluted
kg/cm2/m/sec. 260/80
g m mm No. % % %