Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
1 Hepco DLS3
DFC-3-S
DFC-45
Hepco DLS3
2 2A
DABL40
DABL40
DAB4
4 5
DAB3
SBS35 slide beam
MCS 1-242-2028
Fixing brackets
DABL20 40 DABL40 DABL45
60 60 DABS
20 40 45
2.5 2.5
2.5 5 2.5
2.5 2.5
2.5 2.5
22.5 22.5
30 22.5 22.5 30
30 30
20 40 45 22.5
22.5 5 30
22.5 5 22.5 5
30 30
30 30
DAB3 65 DAB4 80 20
20 MCS 1-242-2028
20
20
20
15
0.8
15
4
28
20
30 40 20 4
30 40
20 45 45 20
5 20 28
5
30 5
30
DFC45 DFC40
DFC4S DFC3S
70 9 70 9
45 40 25 9 25 9
23 23
23 23
M8 M8 M8
19 19
19 19
All brackets have holes and slots with clearance for M6 screws, unless otherwise stated. (Screws specified but not supplied: refer to table.)
Compatibility Table
MCS PROFILE
1-242- 30x30 30x60 30x90 40x40 40x80 45x45 45x60 45x90 60x60 80x80 90x90 80x160
DFC-3-S 1026 M6x22 ✔ ✔ ✔
M8x22 ✔ ✔ ✔ ✔
DFC-4-S 1002
NONE M8x25 NONE ✔ ✔ ✔ ✔ ✔
DFC-40 1002 M8x22 ✔ ✔ ✔
DLS3 DLS4
1 DFC-45 1002 M8x25 ✔ ✔
SBS & SBM
DABL-40 1001 M6x16 ✔● ✔ ✔
DABL-45 1001 M6x16 ✔● ✔
RTN8M6 M6x16
1026 M6x12 ✔ ✔ ✔
DAB-S
1001 M6x16 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
2 DLS3 & SBS DABL-40 ✔ ✔ ✔ ✔● ✔ ✔ ✔ ✔
1001 RTN8M6 M6x16 M6x16
DLS4 & SBM 2 x DABL20 ✔ ✔ ✔ ✔● ✔ ✔ ✔ ✔
2A DLS-3 2 x DABL40 ✔● ✔● ✔● ✔ ✔ ✔
2 x DABL20 1001 RTN8M6 M6x16 M6x16 ✔● ✔● ✔ ✔ ✔
DLS-4
1 x DABL20 ✔● ✔● ✔ ✔ ✔
DAB3 1001 M6x16 ✔● ✔● ✔ ✔ ✔
1-242-2028 1026 M6x12 ✔✦ ✔✦● ✔✦●
SBS
1001 M6x12 ✔✦ ✔ ✔ ✔
3 1001 M6x16 ✔✦ ✔● ✔● ✔
RTN8M6 M6x16
DAB4 1026 M6x12 ✔■✦ ✔■✦● ✔■✦●
✔ These joints are possible. ✔● The joint is possible for only one
orientation of the MCS section
✗ ✔
✔■ The joint is possible but the bracket is ✔✦ Joint is possible but the hollow
wider than the MCS section. in the SB is partially exposed.
Joining DLS units together to make multi-axis systems
The lightweight DLS profile may be preferable for high inertia Y axis applications. Please refer to Hepco DLS and GV3
catalogues. X and Y axis DLS units may be coupled together in any combination of size. Fixing holes must be drilled
and tapped accordingly. For Z axis requirements please refer to Cantilever axis in DLS catalogue.
Clamp method
For attaching Y axis in orientation as shown. Please refer to DLS catalogue for details of the DFC-3-L and DFC-4-L
M6x20 screws
DFC-3-L DFC-3-L
fixing clamp fixing clamp
Y
M6 customer
mounting holes
DLS3 units X
T-nut method
For attaching Y axis in either orientation (refer both illustrations). Heavy duty T-nut TN8M6 or T-nut strip TN8S should
be used if lightweight Y axis profile is required (see GV3 catalogue).
DLS3 or
SBS beam
RTN8M6
X T nuts
DLS3 units
Extra holes
required
DLS3 carriage
removable
top plate M6 screws
fix carriage to
T nuts in beam
Ref: DLS/GV3/MCS-02-UK