Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
USERS GUIDE
Read this Users Guide before you start using your P-touch. Keep this Users Guide in a handy place for future reference.
INTRODUCTION
Thank you for purchasing the P-touch 1800/1810! Your new P-touch will allow you to create labels and stamps for any need. Its versatility enables you to design custom labels by choosing from a variety of frame designs and from many characters sizes and styles. In addition, the four tape widths (1/4 (6 mm), 3/8 (9 mm), 1/2 (12 mm), and 3/4 (18 mm)) and variety of tape colors allow you to print personalized labels, useful for color-coded filing. With the Stamp function, you can quickly and easily make stamps for reusable pre-inked stamp holders. You no longer have to worry about urgent tasks that require professional printing. In the office, the factory, the lab and the home, the quality and performance of the P-touch 1800/1810 makes it an extremely practical machine. Finally, as you may want to refer to this Users Guide occasionally, we suggest that you keep it in a handy place. (The PT-1800 and the PT-1810 models are equipped with the same functions; however, only the PT-1810 is available with a carrying case.) FCC NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/television technician for help. Patent numbers and patent publication numbers which are related to this product are as below: USP4839742 USP4983058 USP5120147 USP4927278 USP5009530 USP4976558 USP5069557
CONTENTS
Getting Started
GENERAL DESCRIPTION..................................................................................... 2 GENERAL PRECAUTIONS ................................................................................... 4 BATTERIES........................................................................................................... 5 OPTIONAL AC ADAPTOR .................................................................................. 6 TAPE CASSETTE................................................................................................... 7 ATTACHING LABELS........................................................................................... 8 PRINT HEAD & ROLLERS .................................................................................... 9
TAPE MARGIN FUNCTION............................................................................... 61 HORIZONTAL ALIGNMENT FUNCTION.......................................................... 63 MIRROR PRINTING FUNCTION ....................................................................... 64 LENGTH FUNCTION ........................................................................................ 65 PRINT KEY & FEED FUNCTION ........................................................................ 67 NUMBERING FUNCTION................................................................................. 68 REPEAT PRINTING FUNCTION......................................................................... 70 MEMORY FUNCTIONS ..................................................................................... 72 TROUBLESHOOTING ....................................................................................... 76 ERROR MESSAGE LIST ...................................................................................... 77 SPECIFICATIONS............................................................................................... 81 ACCESSORIES.................................................................................................... 82
ii
Getting Started
GENERAL DESCRIPTION
TOP VIEW
Tape cutter lever Tape compartment cover
Keyboard
BOTTOM VIEW
Print
Font Line out
)
Clear
! 1
Tab
@ 2
# 3
Tab Length Tape
$ 4
Align
% 5
6
Length
& 7
A.Format Stamp
* 8
U
9
Repeat
0
Number
Del
Q
Symbol
W
Accent
E S D X
Feed
R F C
T G V
Y H B
I J
O K
P L
Alt
Caps
A
Shift
: ; " ?
. '
M
Home
, -
Code
Space
End
GENERAL PRECAUTIONS
Use only Brother TZ tapes with this machine. Do not use tapes that do not have the mark. Do not pull on the tape being fed from the P-Touch. This may damage the tape cassette. Do not use the machine in dusty places, and keep it out of both direct sunlight and rain. Do not expose the machine to high temperatures or high humidity. Never leave it on the dashboard or in the back of your car. Do not leave any rubber or vinyl on the machine for an extended period of time. Doing so may cause staining. Do not clean the machine with alcohol or other organic solvents. Use a soft, dry cloth only. Do not put any foreign objects into or anything on the machine. To avoid injuries, do not touch the cutters edge. Use only the AC adaptor (model AD-60) designed exclusively for this machine. Use of any other adaptor will void the warranty. Do not try to disassemble the AC adaptor. When the machine is not being used for a long period of time and it is not necessary to keep the text les stored in the memory, disconnect the AC adaptor, and remove the batteries to prevent them from leaking and damaging the machine. When the AC adaptor is connected, unplugging the adaptor from the electrical outlet before unplugging it from the machine can delete all text les in the memory, even if batteries are installed. Use six AA alkaline batteries in this machine.
BATTERIES
This lightweight and portable machine can be used anywhere by installing six (6) AA alkaline batteries. When you change the batteries, always replace all six at the same time.
To change the batteries: 1 Remove the battery compartment cover on the back of the machine. 2 If batteries are already installed, remove them. 3 Insert six new AA alkaline batteries, making sure that they face the correct direction. 4 Attach the battery compartment cover.
Be sure to insert the new batteries within ve minutes of removing the old ones, otherwise the text shown in the display and any text les stored in the memory will be lost (unless the machine is plugged into an AC outlet with the AC adaptor). Remove the batteries and disconnect the AC adaptor if you do not intend to use this machine for an extended period of time. When the power is disconnected, all text shown in the display and stored in the memory will be lost. If alkaline batteries are not used, large fonts cannot be printed.
OPTIONAL AC ADAPTOR
The AC adaptor (model AD-60) allows you to use this machine wherever there is an electrical outlet.
To connect the optional AC adaptor: 1 Insert the plug on the adaptor cord into the connector marked DC IN 9.5V on the
right side of the machine.
2 Insert the plug on the adaptor into the nearest standard electrical outlet.
Only use the AC adaptor designed exclusively for this machine. Remove the batteries and disconnect the AC adaptor if you do not intend to use this machine for an extended period of time. When the power is disconnected, all text shown in the display and stored in the memory will be lost. When the AC adaptor is connected, unplugging the adaptor from the electrical outlet before unplugging it from the machine can delete all text les in the memory, even if batteries are installed. It is recommended that you use the AC adaptor when printing large fonts on 3/4 (18-mm)-wide tape since this operation can quickly drain the batteries.
TAPE CASSETTE
A single TZ tape cassette is supplied with this unit. However, since TZ tape cassettes are available for this machine in a wide variety of colors and sizes, it is possible to make distinctive color-coded and stylized labels. In addition, this machine has been designed to allow you to change the tape cassettes quickly and easily.
To change the tape cassette: 1 Lift open the tape compartment cover. The installed cassette is also released. 2 If a tape cassette is already installed, remove it by pulling it straight up. 3 If the ink ribbon in the other tape cassette is loose, use your finger to wind the
toothed wheel in the direction of the arrow on the cassette until there is no slack in the ribbon. Also, make sure that the end of the tape feeds under the tape guides. If you are using a new tape cassette provided with a stopper, be sure to remove the stopper. Insert the tape cassette firmly into the tape compartment, making sure that the entire back of the cassette touches the bottom of the compartment. When inserting the tape cassette, make sure that the inner ribbon does not catch on the corner of the metal guide. Close the compartment cover, then turn on the machine if it is off.
Feed
6 Hold down 7
and press
slack. Push down on the tape cutter lever to cut off any excess tape.
ATTACHING LABELS
LAMINATED TAPE
The enclosed stick enables you to easily remove the backing from labels printed on laminated tapes. 1 Hold the tape in your left hand, with the printed surface facing up, and hold the stick in your right hand. 2 Pass the tape halfway through the long narrow hole in the stick. 3 Turn the stick three-quarters of a turn towards you and pull the stick away from you as shown below. 4 Peel off the label backing.
AB
E CD
GH AB CD EF
FABRIC TAPE
Fabric tape is used to attach a piece of fabric printed with your text onto garments using an iron. After printing the text onto fabric tape and cutting off the label using scissors, place the label on an ironed garment at the location where you wish to attach it in such a way that the printed text can be read correctly. Cover the label with another piece of cloth and use an iron set to a medium-high temperature (320 to 356 F (160 to 180 C)) to press down firmly for 10 to 15 seconds. For more details, refer to the instructions included with the fabric tape cassette.
STAMP TAPE
Refer to pages 45 through 48 for a detailed explanation on using the stamp tape to make stamps.
To clean the print head and rollers: 1 Turn off the machine. 2 Open the tape compartment cover, then remove the tape cassette if one is installed.
The print head and rollers are located in the tape compartment. Print head: Use a dry cotton swab to gently wipe the print head with an up-anddown motion. Rollers: Use a dry cotton swab to wipe each roller with an up-and-down motion while rotating them with your finger. 4 Install a tape cassette, close the tape compartment cover, and then try printing again. 5 If dust still remains, repeat steps 3 and 4 using a cotton swab dipped in isopropyl (rubbing) alcohol. If none of the above works, contact your service representative.
Print head
Print head
Rollers
Cotton swab
10
11
1 Press
Auto
Caps
ABCDEFGHIJKL 1: _
Font 1 Font 2
The underline in the LCD display is called the cursor. It is like a pointer which shows your current position and lets you select characters in your text. The text you create may sometimes be longer than the 11 characters that the LCD display can show at one time. Therefore, the cursor can be moved to show other parts of the text. Pressing the left cursor key ( ) moves the cursor to the left so that the left side of the ) moves the cursor to the right text can be seen and pressing the right cursor key (
so that the right side of the text can be seen. Some format settings are shown by the triangular and square indicators around the edge of the display. The default settings (the selected settings when the power is turned on for the very first time) have been pre-programmed into the machine and represent the most common settings for labels. However, you can design your own label to have any format that you wish. Detailed explanations of the formats can be found on pages 64 through 66. Now, lets enter the text for our first example, the simple door label shown below.
The label in this example was made using the enclosed 1/2 (12-mm)-wide tape.
12
2 Hold down
Caps
and press
Auto
Alt
once. The Caps indicator on the left side of the display lights up.
Caps
ABCDEFGHIJKL 1: _
Font 1 Font 2
Then, lets type in the text in the same way that you would type on a typewriter or a computer keyboard.
To type in MEETING:
Tape
3 Press
once and
Auto
Length Repeat
Alt
once each.
Caps
ABCDEFGHIJKL 1: M E E T I N G _
Font 1 Font 2
Feed
Also like on a typewriter or computer keyboard, the Space key ( add blank spaces to the text.
) allows you to
Feed
), which
moves the cursor through the entered text without adding blank spaces.
13
To add a space:
4 Press
Feed
.
Alt
Auto
Caps
ABCDEFGHIJKL 1: M E E T I N G _
Font 1 Font 2
To type in ROOM:
Align Number
5 Press
then
once, once.
twice,
Auto
Alt
ABCDEFGHIJKL 1: E T I N G R O O M _
Font 1 Font 2
Now that we are finished entering capital letters, we can exit Caps mode.
6 Hold down
Caps
and press
Alt
Auto
ABCDEFGHIJKL 1: E T I N G R O O M _
Font 1 Font 2
Once you have entered the text, you can easily edit it by correcting mistakes or simply adjusting it or its format. For detailed explanations of text editing methods, see pages 34 to 38. 14
7 Press
Auto
Alt
Caps
COPIES 1/ 1
Font 1 Font 2
15
Three-line labels, such as this address label, can only be printed on either 1/2 (12-mm)- or 3/4 (18-mm)-wide tape. Before entering the new text, we must first erase the text shown in the display from the previous time that the machine was used. When clearing the display, we can choose whether to erase all of the text and return all format functions (Font, Size, Width, Style, Underline, Frame, Tape margin, Alignment, and Length) to their default settings or just to erase the text.
1 Hold down
Clear
and press
Alt
Auto
once.
Caps
Font 1 Font 2
2 Press
Home
or is
End
until
Auto
Alt
selected, .
Caps
ABCDEFGHIJKL 1: _
Font 1 Font 2
16
3 Hold down
and press
Caps
Alt
Auto
. Press
Caps
OK TO 1: B i l l _
once, then
twice.
Font 1 Font 2
4 Press
Feed
.
Alt
Auto
Caps
OK TO 1: B i l l _
Font 1 Font 2
5 Type in Reynolds.
Again, the text is longer than the
LCD display. So Bil moves off the display to the left.
Alt
Auto
Caps
OK TO 1: 1 R e y n o l d s _
Font 1 Font 2
6 Press
.
Auto
Alt
Caps
1: B i l l R e y n o l 2: _
Font 1 Font 2
17
Now, we can enter the address: 29 South Main St.; Los Angeles, CA 88888.
Auto
2: 2 9 S o u t h M a 3: _
Font 1 Font 2
Caps
2: i n S t . 3: , C A 8 8 8 8 8
Font 1 Font 2
,
Auto
Alt
press
Caps
FONT HELSINKI
Font 1 Font 2
18
Auto
FONT BRUSSELS
Font 1 Font 2
,
Auto
Alt
press
Caps
FRAME OFF
Font 1 Font 2
,
Auto
continue release
pressing .
until
Alt
Caps
FRAME ROUND
Font 1 Font 2
,
Auto
Alt
press
Caps
FEED FULL
Font 1 Font 2
Auto
Alt
Caps
FEED NARROW
Font 1 Font 2
19
Different format settings can be chosen either before or after the text is entered. The procedure shown above can be used to change the other format settings.
Mirror
If we want only one copy of the text, we could just press to print it. However, lets assume that we have three letters onto which we wish to attach address labels. Therefore, we need to print three copies of the same text.
E Hold down
Repeat
and press
Auto
Alt
once.
Caps
COPIES UNTIL
19?
Font 1 Font 2
Width
F Press
.
Auto
Alt
Caps
COPIES UNTIL
Font 1 Font 2
G Press
printed.
Auto
Alt
Caps
COPIES 1/ 3
Font 1 Font 2
Auto
Alt
Caps
COPIES 2/ 3
Caps
COPIES 3/ 3
Font 1 Font 2
Font 1 Font 2
20
H Push down on the tape cutter lever to cut the tape, then use scissors to cut
along the cutting guide to separate the labels.
With these examples, we have covered many of the basic features of your P-touch so that you can begin creating your own customized labels. If you have any questions about any of the functions or keys, refer to the appropriate explanation in the following section.
21
22
23
POWER KEY
The power key ( ) is located in the top right-hand corner of the keyboard. If bat-
teries have been installed or the machine has been plugged in using the optional AC adaptor, the previous sessions information is displayed when the machine is turned on. This feature allows you to stop work on a label, turn off the machine, and return to it later without having to re-enter the text. The machine will automatically turn off if no key is pressed within 5 minutes. The machines internal memory stores the current sessions information and displays it when you turn on the machine again. To turn on the machine: q Press . The previous sessions information appears in the LCD display.
To turn off the machine: q Press . The current sessions information is stored in the internal memory.
24
CURSOR KEYS
The machines LCD display shows two rows of 11 characters; however, the text that you create can be up to 99 characters long. You can review and edit your text by using the cursor keys to move the cursor so that different parts are shown in the display. LEFT CURSOR KEY To move the cursor one character to the left: q q Press Hold down once. until the cursor moves to the desired position. To move the cursor several characters to the left: To move the cursor to the beginning of the current line: q Hold down and press .
RIGHT CURSOR KEY To move the cursor one character to the right: q Press once. To move the cursor several characters to the right: q Hold down until the cursor moves to the desired position. To move the cursor to the end of the current line: q Hold down and press .
25
once.
If the cursor is in the rst line of text, it will move to the beginning of the line. To move the cursor up several lines:
q Hold down
Home
To move the cursor to the beginning of the entire text: q Hold down and press
Home
DOWN CURSOR KEY To move the cursor down to the following line: q Press
End
once.
If the cursor is in the last line of text, it will move to the end of the line. To move the cursor down several lines:
q Hold down
End
To move the cursor to the end of the entire text: q Hold down and press
End
26
EXAMPLE
Caps
ABCDEFGHIJKL 1: A B C _
Font 1 Font 2
q Hold down
Symbol
and press
Auto
Alt
once.
Caps
1: A B C _
Font 1 Font 2
27
ALT KEY To type in characters printed in color on the right-hand side of the keys:
Symbol
Hold down
and press the key of the desired character written in color. The Alt
Symbol
is held down.
To type in :
Symbol
q Hold down
Symbol
and press
is held down.
Auto
Alt
Caps
LENGTH 1: 0 1 2 _
inch
Caps
LENGTH 1: 0 1 2 - _
inch
Font 1 Font 2
Font 1 Font 2
28
SHIFT KEY To type in a capital letter or a symbol printed in the top left-hand corner of a key:
Caps
Hold down
EXAMPLE
To type in %:
Auto
Alt
Caps
ABCDEFGHIJKL 1: 5 _
Font 1 Font 2
Caps
Underline
q Hold down
and press
.
Auto
Alt
Caps
ABCDEFGHIJKL 1: 5 % _
Font 1 Font 2
Caps
The Caps mode is similar to holding down tinuously. To type in many capital letters:
Caps
and press
Auto
Alt
Caps
ABCDEFGHIJKL 1: _
Font 1 Font 2
2 3
Press the keys of the desired letters or symbols. To exit Caps mode, hold down and press
Caps
29
SPACE KEY
Feed
) lets you add blank spaces between characters in your text. It is ), which just moves the cursor without adding
Press
EXAMPLE
To add a space:
Auto
Alt
Caps
ABCDEFGHIJKL 1: J . _
Font 1 Font 2
Feed
q Press
.
Auto
Alt
Caps
ABCDEFGHIJKL 1: J . _
Font 1 Font 2
30
RETURN KEY
Like on a typewriter or word processor, this machines return key ( ) is used to end a line of text and start another one. When you have finished entering one line, press the return key to make a new line and move the cursor to it.
A single block can only contain a maximum of three text lines. If you press when the cursor is located in the third line, the error message 3 LINE LIMIT! will appear.
Maximum number of lines that can be printed 1 2 3 3
Tape widths 1/4 (6 mm) 3/8 (9 mm) 1/2 (12 mm) 3/4 (18 mm)
The return key can also be used to select an item from a list (e.g., add a symbol or accented character to the text) or to apply a selected setting. Some questions asking you to confirm a command may appear on the LCD display, especially when the function that you have chosen will delete or affect files. In these cases, pressing is like answering yes.
Clear
q
To add a new line: Press . The return mark ( ) appears to indicate the end of the line.
31
TAB FUNCTION
This function allows you to separate sections of a line of text by adding tabs. This enables you to create perfectly aligned columns without having to type in several spaces. All tabs have the same length and are measured from either the beginning of the line or the previous tab if there is more than one. The tab length can be set between 0.0 and 11.8 (0.0 and 30.0 cm).
The text can contain no more than 50 tabs. If 50 tabs have already been added to
Tab
1 2
and press or
End
To change the units (inches or centimeters) used to display the tab lengths, press until the desired units are displayed.
.
Tab
Press
To add a tab: q Hold down and press once. The tab mark ( ) appears in the text to
If the text in front of a tab extends past the point where the next section of text should start, the text will instead start at the following tab position. For example, if the tab length is set to 2 and the following text is typed in:
1: A B C D E F G H I 2: J K L M N O P Q R S T U
32
GHI U
Margin
1 Hold down
Tab Length
and press
Auto
Alt
once.
Caps
Font 1 Font 2
2 Press
End
Caps
3 Press
To add a tab:
q Hold down
Tab
Font 1 Font 2
and press
Auto
Alt
once.
Caps
ABCDEFGHIJKL 1: P a r t N o .
Font 1 Font 2
33
DELETE KEY
Clear
) allows you to remove characters to the left of the cursors current ), which only moves the cursor without
deleting any characters. The delete key can also be used to quit most functions and return to the previous display without changing the text. Some questions asking you to confirm a command may appear on the LCD display, especially when the function that you have chosen will delete or affect files. In these cases,
Clear
pressing
1
Home
or
End
2 1
Press Press
once. ,
Clear
or
End
immediately to the right of the last character that you wish to delete.
Hold down
until all of the characters that you wish to delete are deleted.
Press
To answer no:
Clear
Press
34
Press
Home
or
End
Hold down
and press
Line Out
once.
is pressed while
EXAMPLE
To delete 012-345-6789:
Auto
Alt
Caps
1: S G a r d e n 2: 2 - 3 4 5 - 6 7 8 9 _
Font 1 Font 2
q Hold down
Line Out
and press
Auto
Alt
once.
Caps
1: K s G a r d e n 2: _
Font 1 Font 2
35
CLEAR FUNCTION
When clearing the display before entering new text, the Clear function can be used to choose whether all of the text is erased and all format functions (Font, Size, Width, Style, Underline, Frame, Tape margin, Alignment, Tab length, Mirror printing, and Length) are returned to their default settings, or whether just the text is erased. To delete all of the text and return all formats to their default settings:
Clear
1 2
and press or
End
3
Press EXAMPLE
Caps
1: S G a r d e n 2: 2 - 3 4 5 - 6 7 8 9 _
Font 1 Font 2
1 Hold down
Clear
and press
Auto
Alt
Caps
Font 1 Font 2
2 Press
Home
Auto
Caps
Font 1 Font 2
36
3 Press
.
Auto
Alt
Caps
1: _
Font 1 Font 2
1 2
and press or
End
3
Press
EXAMPLE
Caps
1: S G a r d e n 2: 2 - 3 4 5 - 6 7 8 9 _
Font 1 Font 2
1 Hold down
Clear
and press
Auto
Alt
Caps
Font 1 Font 2
37
2 Press
End
flashing.
Caps
Font 1 Font 2
3 Press
.
Alt
Caps
1: _
Font 1 Font 2
38
ACCENT FUNCTION
The Accent function can also be used to add accented characters to your text. Many of these characters can also be typed in using the Symbol function. The accented characters are grouped according to the capital or small letter that they are combined with. The following accented characters are available: Letters a A c C e E i Accented characters e E Letters I n N o O u U Accented characters
1 2
and press
Caps
and press
3 4
Press Press
or
before pressing
. Then, continue adding accented characters by selecting them as explained in steps 2 and 3, and holding down . Press just while pressing
39
EXAMPLE
1 Hold down
Accent
and press
Auto
Alt
Caps
a-u/A-U? 1: R E S U M _
Font 1 Font 2
Caps
2 Hold down
Tape
and press
Auto
Alt
.
Caps
1: R E S U M _
Font 1 Font 2
3 Press
until flashes.
Auto
Alt
Caps
1: R E S U M _
Font 1 Font 2
4 Press
.
Auto
Alt
Caps
1: R E S U M _
Font 1 Font 2
40
SYMBOL FUNCTION
In addition to the letters, symbols and numerals on the key tops, there are 53 additional marks available with the Symbol function. The following symbols are available: Group 1 2 3 4 5 To type in a symbol:
Symbol
Symbol + = E
2
e
3
R
2
C
3 4
TM
1 2 3
and press or
End
until the desired symbol flashes. Press . The symbol appears in the text.
To type in a series of symbols, hold down and 3, and holding down while pressing
Then, continue adding symbols by selecting them as explained in steps 2 after selecting the last symbol in the series.
41
EXAMPLE
: and press
Auto
Alt
1 Hold down
Symbol
.
Caps
1: D A N G E R _
Font 1 Font 2
2 Press
Home
or
End
until the
Auto
Alt
1: D A N G E R _
Font 1 Font 2
3 Press
.
Auto
Alt
Caps
1: D A N G E R _
Font 1 Font 2
42
Label length setting OFF 2.8 (7.0 cm) 4.8 (12.2 cm) 5.5 (14.0 cm) 3.0 (7.7 cm) 3.6 (9.2 cm) 2.9 (7.3 cm) 1.8 (4.5 cm) 2.3 (5.8 cm) 3.5 (8.9 cm) 2.2 (5.6 cm) 2.0 (5.2 cm) 3.2 (8.2 cm) 2.6 (6.5 cm) 7.2 (18.3 cm) 3.7 (9.4 cm)
Tape margin setting FULL NARROW NARROW NARROW NARROW NARROW NARROW NARROW NARROW NARROW NARROW NARROW NARROW NARROW NARROW NARROW
Horizontal alignment setting LEFT CENTER CENTER CENTER CENTER CENTER CENTER CENTER CENTER CENTER CENTER CENTER CENTER CENTER CENTER CENTER
1 2
and press or
End
43
Press
EXAMPLE
to apply the selected setting. The Length indicator lights up if any setting other than DEFAULT is selected.
1 Hold down
A.Format
and press
Auto
Alt
Caps
Font 1 Font 2
2 Press
Home
Auto
Caps
Font 1 Font 2
3 Press
44
STAMP FUNCTION
The Stamp function allows you to quickly and easily create your own stamp stencil films for customized stamps. Select this function to automatically center the text and adjust the tape length and margins to a perfect format for the pre-inked stamp film holders. Since the stamp holder is reusable, just make a new stamp stencil film and replace the one in the holder. To make a stamp: 1 Type in the text, and then insert a Medium (3/4 (18-mm)-wide) stamp film cassette.
Stamp
2 3
and press
. The text is formatted for a stamp: centered within the preset message
4 5
Press
Push down on the tape cutter lever, remove the backing paper from the stamp stencil film and affix it to the ink pad of a stamp film holder.
EXAMPLE
To cut a stamp:
1 Enter the text and insert a stamp film cassette in the tape compartment. 2 Hold down
Stamp
and press
Auto
Alt
Caps
STAMP FORMAT?
Font 1 Font 2
45
3 Press
.
Auto
Alt
Caps
1: J . S m i t h 2: 1 2 3 4 M a i n S _
Font 1 Font 2
Mirror
4 Press
Auto
Alt
Caps
COPIES 1/ 1
Font 1 Font 2
5 Push down on the tape cutter lever to cut the stamp stencil film.
To afx a stamp:
6 Remove the stamp frame from around the stamp film holder ink pad, one
side at a time, then remove the protective seal covering the ink pad and the backing paper from the stamp stencil film. 7 With the glossy side of the stamp stencil film upward, align one of its ends with the slit on the side of the stamp film holder.
Glossy side
Tape end
Slit
46
8 Hold the end of the stamp stencil film in place with your thumb, then pass
the tape through the guides while pulling it tight.
Guides
9 Fold the other end of the stamp stencil film over the other side of the stamp
film holder and hold it in place with your finger.
Fold over
0 Fit the stamp frame over the stamp stencil film and push it into place.
47
Be sure that the stamp is correctly covered in order to prevent ink spills.
48
The default size setting is AUTO and the default width setting is OFF. The currently selected size setting is always shown by the indicator above the display. With the AUTO size setting, the machine compares your text with the width of the installed tape and automatically adjusts the characters to the largest possible size. However, six other point sizes are also available and each can be printed in wide characters. Size setting (in points)
Width function ON
12
18
49
Width function ON
24
36
, press
, continue pressing
3
The current character size setting is also shown by the size indicator above the display. Release to apply the selected size setting to the entire text. With the AUTO setting selected and 3/4 (18-mm)-wide tape installed, text consisting of just one line of only capital letters will be printed with a character size of 48 points.
50
EXAMPLE
,
Auto
Alt
press
Caps
SIZE AUTO
Font 1 Font 2
,
Auto
Alt
until 24 is
Caps
SIZE 24
Font 1 Font 2
3 Release
, press
2 3
, continue pressing
51
EXAMPLE
,
Auto
Alt
press
Caps
WIDE OFF
Font 1 Font 2
,
Auto
Alt
until ON is
Caps
WIDE ON
Font 1 Font 2
3 Release
52
STYLE FUNCTION
You can choose from nine different character styles to apply to your text. Characters printed using the smaller sizes may be difcult to read if certain style settings (e.g., I+SHADOW) are selected. The following style settings are available: NORMAL I+BOLD (italic & bold) BOLD I+OUTLINE (italic & outline) OUTLINE I+SHADOW (italic & shadow) SHADOW VERTICAL ITALIC The default style setting is NORMAL. The style indicator at the bottom right of the display shows the current style setting when any setting other than NORMAL is selected. Refer to Reference at the end of this section for samples of the available settings. To change the style setting:
Style
, press
, continue pressing
3
The current style setting is shown by the style indicator at the bottom right of the display.
to apply the selected style setting to the entire text.
Release
EXAMPLE
,
Auto
Alt
press
Caps
STYLE NORMAL
Font 1 Font 2
53
,
Auto
continue
pressing
until
Alt
I+SHADOW is displayed.
Caps
STYLE I+SHADOW
Font 1 Font 2
3 Release
54
Font setting
HELSINKI
BRUSSELS
Font setting
HELSINKI
BRUSSELS
Font setting
VERTICAL
HELSINKI
BRUSSELS
55
UNDERLINE FUNCTION
You can emphasize your text by underlining it. The default underline setting is OFF. When the Underline function is set to ON, the Underline indicator on the right side of the display lights up.
ON
, press
, continue pressing
3
Release
EXAMPLE
,
Alt
Auto
press
Caps
UNDERLINE OFF
Font 1 Font 2
,
Auto
Alt
until ON is
Caps
UNDERLINE ON
Font 1 Font 2
3 Release
56
FONT FUNCTION
With the Font function, you can choose one of two fonts for your text. The following font settings are available: HELSINKI and BRUSSELS The default font setting is HELSINKI. The currently selected font setting is always shown by the Font indicators below the display. Refer to Reference at the end of this section for samples of the available settings. To change the font setting:
Font
, press
, continue pressing
3
The current font setting is also shown by the font indicator at the bottom left of the display.
to apply the selected font setting to the entire text.
Release
EXAMPLE
,
Auto
Alt
press
FONT HELSINKI
Font 1 Font 2
, until
Alt Caps
continue
pressing
Auto
BRUSSELS is displayed.
FONT BRUSSELS
3 Release
Font 1 Font 2
57
HELSINKI
Font 1
BRUSSELS
Font 2
58
FRAME FUNCTION
With the Frame function, you can choose from various frames and highlights to design a more decorative or emphasized label. The following Frame settings are available: OFF, ROUND, CANDY, POINTING, NAMEPLATE, DOT The default frame setting is OFF; however, other settings are also available. When any setting other than OFF is selected, the Frame indicator on the right side of the display lights up. Refer to Reference at the end of this section for samples of the available settings. To change the frame setting:
Frame
, press
, continue pressing
3
The Frame indicator lights up when any setting other than OFF is selected.
to apply the selected frame setting to the entire text.
Release
EXAMPLE
,
Auto
Alt
press
Caps
FRAME OFF
Font 1 Font 2
,
Auto
continue
pressing
until
Alt
CANDY is displayed.
Caps
FRAME CANDY
3 Release
Font 1 Font 2
59
REFERENCE REFERENCE Frame setting Frame sample Frame setting Frame sample
OFF
POINTING
ROUND
NAMEPLATE
CANDY
DOT
60
After printing a label using the NONE tape margin setting, hold down press
Feed
and
once to feed the tape before pushing down on the tape cutter lever
to cut it. Otherwise some of the printed characters may be cut off. After printing using the NARROW and HALF tape margin settings, push down on the tape cutter lever to cut off the label, then use scissors to cut along the printed dots (:) to center the text within the label. To change the tape margin setting:
Tape
, press
2 3
, continue pressing
61
EXAMPLE
,
Auto
Alt
press
Caps
FEED FULL
Font 1 Font 2
,
Auto
Alt
until HALF
Caps
FEED HALF
Font 1 Font 2
3 Release
62
LEFT
CENTER
RIGHT
, press
2 3
, continue pressing
tal alignment setting is displayed. Release to apply the selected horizontal alignment setting to the entire text.
EXAMPLE
,
Alt
Auto
press
Caps
H.ALIGNMENT LEFT
Font 1 Font 2
,
Auto
continue
pressing
until
Alt
RIGHT is displayed.
Caps
H.ALIGNMENT RIGHT
3 Release
Font 1 Font 2
63
ON
, press
held down to
, continue pressing
Release
EXAMPLE
,
Auto
Alt
press
Caps
MIRROR OFF
Font 1 Font 2
,
Auto
until
Alt
Caps
MIRROR ON
3 Release
64
Font 1 Font 2
LENGTH FUNCTION
Although the length of the printed label automatically adjusts to fit the length of the entered text, there may be times when you will want to make a label with a specific length. The Length function allows you to set the label length between 1.6 and 11.8 (4.0 cm and 30.0 cm). The default length setting is OFF. When the Length function is set to ON, the Length indicator on the right side of the display lights up. Turning off the machine and turning it on again changes the length setting back to OFF. To turn on or off the Length function:
Length
, press
play the current length of the label (the text and both margins) briefly, then display the current label length setting (ON or OFF).
Length
, continue pressing
3 4
Press length.
Release
Home
to select the desired length or use the number keys to enter the
To change the units (inches or centimeters) used to display the label length, press until the desired units are displayed.
End
To change the length in 1 (1.0-cm)-steps, hold down either Home or and then release the key when the desired setting is displayed. Press .
65
EXAMPLE
, press
held
Auto
Alt
LENGTH
Caps
inch 2.1
LENGTH
Caps
inch OFF
Font 1 Font 2
Font 1 Font 2
,
Auto
Alt
until ON is
LENGTH
Caps
inch ON
Font 1 Font 2
3 Release
.
Auto
Alt
LENGTH
Caps
inch 3.9
Font 1 Font 2
4 Press
Home
LENGTH
Caps
inch 5.0
5 Press
Font 1 Font 2
66
Press
If NONE tape setting is selected and the tape is immediately, some printed characters will be cut off. To feed the tape after printing, hold down and
Feed
once.
To feed the tape: Feed q Hold down and press once. 1 (25 mm) of tape is fed out. To cut the tape: q Push down on the tape cutter lever. In order to prevent damaging the tape, do not try to cut it while printing or feeding. Pushing down on the tape cutter lever too far may break it. EXAMPLE
1 Press
once.
Alt
Auto
Caps
COPIES 1/ 1
Font 1 Font 2
2 Hold down
and press
Feed
once.
67
NUMBERING FUNCTION
This function can be used to print many copies of the same text while increasing a certain number in the text by 1 after each label is printed. To use the Numbering function:
Press
Home
or
End
and press
Font
M.Del
to
and press
).
Mirror
Press
(or
After printing using the NONE tape magin setting, hold down press
Feed
and
once to feed the tape before cutting it, otherwise some of the
Press down on the tape cutter lever to cut the tape, and then use scissors to cut along the printed dots to separate the labels.
EXAMPLE
Caps
1: S T U D I O 1 _
Font 1 Font 2
68
2 Hold down
Number
and press
Auto
Alt
Caps
NUMBER UNTIL
19?
Font 1 Font 2
Width
3 Press
.
Auto
Alt
Caps
NUMBER UNTIL
Font 1 Font 2
Mirror
4 Press
(or
).
Auto
Alt
Caps
COPIES 1/3
Caps
COPIES 2/3
Font 1 Font 2
Font 1 Font 2
Auto
Alt
Caps
COPIES 3/3
Font 1 Font 2
5 Press in the tape cutter lever to cut the tape, then use scissors to cut along
the cutting guide to separate the labels.
69
and press
Font
M.Del
to
and press
(or press
just
Mirror
).
(or ) to begin printing the labels. The number of each copy is
Press
If NONE tape setting is selected and the tape is immediately, some printed characters will be cut off. To feed the tape after printing, hold down and
Feed
once.
Press down on the tape cutter lever to cut the tape, and then use scissors to cut along the printed dots to separate the labels.
EXAMPLE
1 Hold down
Repeat
and press
Auto
Alt
Caps
COPIES UNTIL
19?
Font 1 Font 2
70
Width
2 Press
.
Auto
Alt
Caps
COPIES UNTIL
Font 1 Font 2
Mirror
3 Press
(or
).
Auto
Alt
Caps
COPIES 1/3
Caps
COPIES 2/3
Font 1 Font 2
Font 1 Font 2
Auto
Alt
Caps
COPIES 3/3
Font 1 Font 2
4 Press down on the tape cutter lever to cut the tape, and then use scissors to
cut along the cutting guide to separate the labels.
71
MEMORY FUNCTIONS
You can use the memory to store your most frequently used text files. The text remains in the memory, even after all characters are removed from the display using the Clear funcClear
and pressing
).
When each file is stored, it is given a number to make recalling it easier. Up to 9 text files or about 300 characters can be stored in the memory. Each stored text file can have a maximum of 99 characters. Since a copy of the stored text file is recalled when the Recall function is used, the text can be edited or printed without changing the originally stored file. When a file is no longer needed or more space is necessary, the Memory delete function can be used to delete it.
When inserting new batteries, be sure to insert the new ones within ve minutes of removing the old ones, otherwise any text les stored in the memory will be lost (unless the machine is plugged into an electrical outlet with the AC adaptor).
STORING TEXT
To store a text file:
Store
and press
If 300 characters have already been stored, the error message MEMORY FULL! appears in the display. If this occurs, an existing text le must be deleted before the new one can be stored.
Font M.Del
to
The text is stored under the selected file number and the text previously shown in the display reappears.
If a le is already stored under the selected le number, the message OVERWRITE? appears in the display and you must decide whether or not to overwrite it (delete it from the memory and store the new one). To quit the Store function without storing the text, hold down
Store Clear
and
press
).
72
To overwrite the stored file with the new one: q Press to delete the previously stored le and store the new one under the selected number.
To go back and choose another le number without overwriting the text le,
Clear
press
RECALLING TEXT
To recall a text file:
Recall
and press
M.Del
to
recall. The text stored under the selected file number is shown.
.
or
End
To display the text stored under other le numbers, press the key of a different le number.
, or and
press
).
Press
. Any text previously entered in the display is erased and the text stored
DELETING A FILE
To delete a text file:
M.Del
and press
73
Font
M.Del
to
delete. The text stored under the selected file number is shown.
or End , or To display the text stored under other le numbers, press the key of a different le number. To cancel the Memory delete function without deleting the text le, hold
M.Del Clear
down
and press
).
Press
EXAMPLE
1 Hold down
Store
and press
Auto
Alt
Caps
STORE SELECT
19?
Font 1 Font 2
Style
2 Press
.
Auto
Alt
Caps
4: J o h n S m i t h
Font 1 Font 2
1 Hold down
Recall
and press
Auto
Alt
Caps
RECALL SELECT
19?
Font 1 Font 2
74
Style
2 Press
.
Auto
Alt
Caps
Font 1 Font 2
3 Press
.
Auto
Alt
Caps
1: J o h n S m i t h _
Font 1 Font 2
1 Hold down
M.Del
and press
Auto
Alt
Caps
CLEAR SELECT
19?
Font 1 Font 2
Style
2 Press
.
Auto
Alt
Caps
Font 1 Font 2
3 Press
.
Auto
Alt
Caps
1: J o h n S m i t h _
Font 1 Font 2
75
TROUBLESHOOTING
Problem 1. The display stays blank after you have turned on the machine. Remedy Check that the AC adaptor is connected correctly. If you are using alkaline batteries, check that they are correctly inserted. If the batteries are low, replace them with new ones. Check that the tape cassette has been inserted properly. If the tape cassette is empty, replace it with a new one. Make sure that the tape compartment cover has been closed. If the batteries are low, replace them with new ones. If you are using alkaline batteries, they may be low. Try using the AC adaptor or replace the batteries with new ones. Clean the print head as explained on page 9. You have reached the end of the tape. Replace the tape cassette with a new one. Turn off the machine, and then while
Align
2. The machine does not print or the printed characters are blurred.
3. The text les that you stored in the memory are no longer there. 4. The printed characters formed properly. are not
5. A blank horizontal line appears through the printed label. 6. Striped tape appears.
7. The machine has locked up (i.e., nothing happens when a key is pressed).
holding down
and
turn the machine back on. The text and formats in the display and all text les stored in the memory are erased.
76
This message appears when the installed alkaline batteries become weak. This message appears if you hold down
Length
and press
, but no
text has been entered in the display. This message appears if you try to print, but no text has been entered. This message appears if you try to store a text le in the memory, but no text has been entered in the display. BUFFER FULL! This message appears if you try to enter a character, symbol, bar code, return or space after 99 characters have already been entered. Enter text before printing.
77
Cause This message appears if the cursor is at the end of the text when you hold down
Number
and press.
. CHANGE ADAPTOR This message appears if a high-voltage adaptor is being used. This message appears if the tape cutter lever is pressed down while a label is being printed. This message appears if the cursor is not below a number when you hold down
Number
Remove the high-voltage adaptor and connect the adaptor designed exclusively for this machine. Release the tape cutter lever.
CUTTER ERROR!
INVAL. CHRS!
and press
and press
. .
LENGTH LIMIT!
This message appears if the text is longer than 1 meter when you try to print. This message appears if the Length function is used to set a label length that is less than 1.6 (4.0 cm) or more than 11.8 (30.0 cm). This message appears if the Tab Length function is used to set a tab length that is more than 11.8 (30.0 cm).
Shorten the text to less than 1 meter before trying to print. Set the label length between 1.6 (4.0 cm) and 11.8 (30.0 cm).
Set the tab length so that it is less than 11.8 (30.0 cm).
78
Cause This message appears if the number of lines in the text is greater than the maximum number of lines possible for the installed tape. This message appears if you try to store a text le after 300 characters have already been stored in the memory. This message appears if you try to recall or delete a text le from the memory when none are stored. This message appears if the number that is set to be printed using the Numbering function is less than the number above the cursor. This message appears if there is a problem with the machines read only memory. This message appears if the installed alkaline batteries are about to run out. This message appears if there is a problem with the machines software.
MEMORY FULL!
NO FILES!
Press the key of a number that is greater than the number in the text.
ROM PROBLEM!
REPLACE BATTERIES!
SYSTEM ERROR!
79
Cause This message appears if you try to print a label or feed the tape when no tape cassette is installed. This message appears if 50 tabs have already been added to the text when
Tab
TAB LIMIT!
. Reduce the size of the characters or install a wider tape. Delete some of the text, reduce the character width or increase the set label length.
This message appears if the size of the text is larger than the width of the installed tape. This message appears if the length of the text is longer than the label length that has been set using the Length function.
80
SPECIFICATIONS
HARDWARE
Input Device: LCD: Keyboard - 51 keys 7 5 dots 12 characters 2 lines 17 indicators Pressure-sensitive, Adhesive-based 26 3 (8 m) long Four widths available: 1/4 (6 mm) 3/8 (9 mm) 1/2 (12 mm) 3/4 (18 mm) Six AA alkaline batteries (AM3, LR6) or optional AC adaptor Auto power-off if no key is pressed for 5 minutes 128 dot / 180 dpi 7 (W) 8 1/16 (D) 2 23/63 (H) (178 205 60 mm) 1.5 lbs (700 g) (without a tape cassette and batteries installed)
Print Tape:
SOFTWARE
Buffer Size: Memory Size: Character Size: Print Styles: Maximum 99 characters Maximum three lines 300 characters Six sizes (6, 9, 12, 18, 24 and 36 points) + 48 point (Capital letters only) All are available in normal and wide Normal, Outline, Bold, Shadow (each can be combined with Italic), and Vertical
81
ACCESSORIES
q Supplies Obtain tape cassettes from your nearest authorized dealer. Use only Brother TZ tapes with this machine. Brother cannot be held responsible for trouble caused by the use of unauthorized supplies. Do not use tapes that do not have the mark. Description QTY/ PACKAGE PRICE
Stock No.
3/4 (18mm)-wide laminated tapes TZ-141 TZ-145 TZ-241 TZ-242 TZ-243 TZ-344 TZ-345 TZ-441 TZ-541 TZ-545 TZ-641 TZ-741 TZ-B41 TZ-M41 TZ-WB41 TZ-WT41 TZ-WS41 TZ-131 TZ-231 TZ-232 TZ-335 TZ-121 TZ-221 TZ-325 TZ-421 82 Black characters on clear tape White characters on clear tape Black characters on white tape Red characters on white tape Blue characters on white tape Gold characters on black tape White characters on black tape Black characters on red tape Black characters on blue tape White characters on blue tape Black characters on yellow tape Black characters on green tape Black characters on uorescent orange tape Black characters on clear (matte) tape Black characters on Bugs Bunny tape Black characters on Taz tape Black characters on Tweety & Sylvester tape Black characters on clear tape Black characters on white tape Red characters on white tape White characters on black tape Black characters on clear tape Black characters on white tape White characters on black tape Black characters on red tape 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 $20.99 $20.99 $20.99 $20.99 $20.99 $24.99 $23.99 $20.99 $20.99 $23.99 $20.99 $20.99 $24.99 $20.99 $23.99 $23.99 $23.99 $16.99 $17.99 $17.99 $20.99 $14.99 $16.99 $18.99 $16.99
Stock No.
Description
QTY/ PACKAGE
PRICE
1/4 (6mm)-wide laminated tapes TZ-111 TZ-211 TZ-315 Special tapes Stock No. TZ-SE4 TZ-FA3 Stamp kit Stock No. SK-MB SH-MB Description Stamp-making kit for Medium stamp with black ink Additional stamper for Medium stamp with black ink QTY/ PACKAGE 1 1 PRICE $37.99 $24.99 Description Black characters on 3/4 (18 mm) security tape Blue characters on 1/2 (12 mm) fabric tape QTY/ PACKAGE 1 1 PRICE $29.99 $24.99 Black characters on clear tape Black characters on white tape White characters on black tape 1 1 1 $12.99 $14.99 $17.99
Options Stock No. AD-60 AC Adapter Description QTY/ PACKAGE 1 PRICE $24.99
83
84
Subtotal Name: Address: City: State/Zip: Daytime Phone: Shipping/Handing Options SEND ORDER FORM TO: Brother International Corp. Attn: Consumer Accessory Div. P.O. Box 341332 Bartlett, TN38184-1332 Please choose one: Standard ($5.00) 2nd day air freight ($8.75) Mandatory for all deliveries outside of the continental U.S. (Alaska, Hawaii, Puerto Rico, Virgin Islands & Canada) All other overseas orders ($25.00) $ TOTAL DUE (US dollars) Method of payment (Check one) ( ) Visa ( ) MasterCard ( ) Discover ( ) American Express ( ) Check/Money Order Account Number Expiration Date Signature $ Accessory Subtotal: $
AZ, CA, CO, CT, FL, GA, IL, LA, MA, MD, MI, MN, MO, NC, NJ, NV, NY, OH, PA, TN, TX, VA, WAresidents $ add applicable sales tax
Subtotal Name: Address: City: State/Zip: Daytime Phone: Shipping/Handing Options SEND ORDER FORM TO: Brother International Corp. Attn: Consumer Accessory Div. P.O. Box 341332 Bartlett, TN38184-1332 Please choose one: Standard ($5.00) 2nd day air freight ($8.75) Mandatory for all deliveries outside of the continental U.S. (Alaska, Hawaii, Puerto Rico, Virgin Islands & Canada) All other overseas orders ($25.00) $ TOTAL DUE (US dollars) Method of payment (Check one) ( ) Visa ( ) MasterCard ( ) Discover ( ) American Express ( ) Check/Money Order Account Number Expiration Date Signature $ Accessory Subtotal: $
AZ, CA, CO, CT, FL, GA, IL, LA, MA, MD, MI, MN, MO, NC, NJ, NV, NY, OH, PA, TN, TX, VA, WAresidents $ add applicable sales tax
GUIA DE INSTRUCCIONES
INTRODUCCIN
Gracias por adquirir una P-Touch 1800. Su nueva P-Touch le permitir disear y crear etiquetas y membretes para cualquier tipo de aplicacin. Su versatilidad le permitir crear etiquetas personales seleccionando distintos diseos de marcos y muchos tamaos y estilos de caracteres. Adems, los cuatro diferentes anchos de cinta (1/4 (6 mm), 3/8 (9 mm), 1/2 (12 mm), 3/4 (18 mm) y 1 (24 mm)) y la variedad de los colores de la cintas le har posible imprimir etiquetas personales, tiles para relleno con cdigo de colores. Con la funcin de membretes, podr hacer membretes con facilidad y rapidez para soportes de membretes entintados reutilizables. Ya no hay por qu preocuparse por tareas urgentes que requieren impresin profesional. En la oficina, la fbrica, el laboratorio, o en casa, la calidad y el rendimiento de la PTouch 330/350 la convierten en una mquina muy prctica. Para terminar, puesto que esta gua del usuario le ser de gran utilidad, le aconsejamos que la guarde en un lugar accesible para poder consultar en cualquier momento. (Los modelos PT-1800 y PT-1810 disponen de las mismas funciones. Sin embargo, solamente el modelo PT-1810 dispone de estuche de transporte.) AVISO DE LA FCC Este equipo ha sido probado y cumple con los lmites de un aparato digital de la Clase B, siguiendo el apartado 15 de las normas de la FCC. Estos lmites estn pensados para proporcionar una proteccin razonable contra interferencias nocivas dentro de una instalacin residencial. Este equipo podra interferir de forma nociva con comunicaciones por radio si no se instala y utiliza siguiendo las instrucciones. No obstante, no existe ninguna garanta de que no vayan a suceder interferencias en una instalacin concreta. Si este equipo causara interferencias nocivas con la recepcin de radio o televisin, lo cual puede determinarse poniendo el equipo en ON u OFF, se recomienda que el usuario intente corregir dichas interferencias mediante una de las siguientes medidas: - Reoriente o ponga la antena receptora en otro lugar. - Aumente la separacin entre el equipo y el receptor. - Conecte el equipo en una toma de un circuito diferente de la que est conectada el receptor. - Consulte a su distribuidor o a un tcnico experimentado de radio/televisin. A continuacin se indican los nmeros de patente y de publicacin de patente relacionados con este producto: USP4839742 USP4927278 USP4976558 USP4983058 USP5009530 USP5069557 USP5120147
NDICE
PRECAUCIONES GENERALES ............................................................................. 1 PILAS ................................................................................................................... 2 ADAPTADOR DE CA OPCIONAL ....................................................................... 3 CASETES DE CINTA............................................................................................. 4 CABEZAL DE IMPRESIN Y RODILLOS.............................................................. 5 COLOCACIN DE ETIQUETAS........................................................................... 6 TECLA DEL CURSOR........................................................................................... 7 TECLAS CODE, ALT Y SHIFT ............................................................................... 9 TECLA DE RETORNO ........................................................................................ 10 TABULACIN ................................................................................................... 11 TECLA DE BORRADO (DEL).............................................................................. 13 FUNCIN DE BORRADO DE LNEA (LINE OUT) ............................................. 14 FUNCIN DE REPOSICIN (CLEAR) ................................................................ 14 FUNCIN DE ACENTOS................................................................................... 15 FUNCIN DE SMBOLOS ................................................................................. 16 FUNCIN DE FORMATO AUTOMTICO ........................................................ 17 FUNCIN DE MEMBRETE................................................................................. 19 FUNCIONES DE TAMAO Y DE ANCHURA.................................................... 20 FUNCIN DE ESTILO ....................................................................................... 21 FUNCIN DE SUBRAYADO ............................................................................. 22 FUNCIN DEL TIPO DE CARACTERES ............................................................. 23 FUNCIN DE MARCOS.................................................................................... 24 FUNCIN DE CINTA ........................................................................................ 25 FUNCIN DE LA ALINEACIN HORIZONTAL ................................................ 26 FUNCIN DE IMPRESIN DE ESPEJO .............................................................. 27 LENGTH FUNCTIN ........................................................................................ 28 FUNCIN DE LA TECLA DE IMPRESIN Y AVANCE ....................................... 29 FUNCIN DE NUMERACIN .......................................................................... 30 FUNCIN DE IMPRESIN REPETIDA ............................................................... 31 FUNCIONES DE LA MEMORIA ......................................................................... 32 SOLUCIN DE PROBLEMAS ............................................................................ 35 LISTA DE MENSAJES DE ERROR........................................................................ 36 ESPECIFICACIONES........................................................................................... 40 ACCESORIOS .................................................................................................... 41
ii
PRECAUCIONES GENERALES
Con esta mquina emplee slo cintas TZ Brother. No emplee cintas que no tengan la marca . No tire de la cinta que se alimenta desde la P-Touch. Podra daar el casete de cinta. No utilice la mquina en lugares polvorientos, y mantngala alejada de la luz solar directa y la lluvvia. No exponga la mquina a altas temperaturas ni humedad. No la deje nunca en el tablero de instrumentos ni en la parte trasera de su automvil. No deje nada que sea de goma o vinilo encima de la mquina durante perodos prolongados. Podra producir manchas. No limpie la mquina con alcohol ni con otros solventes orgnicos. Emplee solamente un pao suave y seco. No ponga ningn objeto encima ni dentro de la mquina. Para evitar daos, no toque el borde de la cuchilla. Cuando inserte pilas nuevas, asegrese de hacerlo antes de que transcurran cinco minutos desde el momento en que extrae las pilas gastadas, porque de lo contrario se perderan todos los archivos de texto (a menos que la mquina est enchufada a una toma de CA con el adaptador de CA). Emplee slo el adaptador de CA (modelo AD-60) exclusivamente diseado para esta mquina. El empleo de otro cancelara la garanta. No intente desmontar el adaptador de CA. Cuando la mquina no se utilice durante perodos prolongados de tiempo y no sea necesario conservar los archivos de texto en la memoria, desenchufe el adaptador de CA, y saque las pilas para evitar fugas de las mismas que podran ser causa de daos en la mquina. Cuando el adaptador de CA est enchufado en la mquina, si se desenchufa el adaptador de la toma de CA se correr el riesgo de perder todos los archivos de texto de la memoria, aunque las pilas estn insertadas. En esta mquina, emplee seis pilas alcalinas del tamao AA.
PILAS
Esta mquina ligera y porttil puede utilizarse en cualquier lugar instalando seis (6) pilas alcalinas AA. Cuando cambie las pilas, reemplace siempre las seis pilas al mismo tiempo.
Para cambiar las pilas: 1 Extraiga la cubierta del compartimiento de las pilas de la parte posterior de la
mquina.
Asegrese de insertar las pilas nuevas antes de que transcurran cinco minutos desde que se extraen las pilas gastadas, porque de lo contrario el texto que se visualiza en la pantalla y los archivos de texto almacenados en la memoria se perderan (a menos que la mquina est enchufada a una toma de CA con el adaptador de CA). Extraiga las pilas y desconecte el adaptador de CA si no se propone utilizar la mquina durante perodos de tiempo prolongados. Cuando se desconecta la alimentacin, se pierden el texto que se muestra en la pantalla y el que est almacenado en la memoria. Si no se emplean pilas alcalinas, no podrn imprimirse tipos de caracteres grandes.
ADAPTADOR DE CA OPCIONAL
El adaptador de CA (modelo AD-60) le permite emplear esta mquina siempre que disponga de una toma de corriente elctrica.
Emplee slo el adaptador de CA diseado exclusivamente para esta mquina. Extraiga las pilas y desconecte el adaptador de CA si no se propone utilizar la mquina durante perodos de tiempo prolongados. Cuando se desconecta la alimentacin, se pierden el texto que se muestra en la pantalla y el que est almacenado en la memoria. Cuando el adaptador de CA est enchufado en la mquina, si se desenchufa el adaptador de la toma de CA se correr el riesgo de perder todos los archivos de texto de la memoria, aunque las pilas estn insertadas. Se recomienda emplear el adaptador de CA para imprimir tipos de caracteres grandes y cdigos de barras con cintas de 18 mm (3/4) porque esta operacines pueden gastar las pilas con rapidez.
CASETES DE CINTA
Un casete de TZ se suministra con la unidad. Sin embargo, para esta mquina hay disponibles una amplia gama de casetes de cinta TZ de distintos colores y tamaos, es posible crear etiquetas diferentes codificadas por colores o tamaos.
Para cambiar el casete de cinta: 1 Levante la cubierta del compartimiento de la cinta para abrirla. Se libera tambin
entonces el casete instalado.
2 Si ya hay un casete instalado, extrigalo tirando del mismo recto hacia arriba. 3 Si la cinta entintadora del otro casete se afloja, utilice un dedo para bobinar la rueda
dentada en el sentido de la flecha de dicho casete hasta tensar la cinta. Adems, cercirese de que el extremo de la cinta est debajo de las guas de la misma. Si est utilizando un casete de cinta nuevo provisto de retn, cercirese de extraer ste. Inserte firmemente el casete de cinta en el compartimiento de la cinta asegurndose de que toda la parte posterior del casete est en contacto con la inferior del compartimiento. Cuando inserte el casete de cinta, asegrese de que la cinta interior no est enganchada en la esquina de la gua metlica. Cierre la cubierta del compartimiento y conecte la alimentacin de la mquina si estaba desconectada.
Feed
5 6 7
Mantenga pulsada
y presione
as quede con la tensin ptima. Presione la palanca de la cuchilla de la cinta para cortar la cinta sobrante.
3 Cabezal de impresin: Emplee un palillo con punta de algodn seco para frotar con
Repita el paso 3 empleando un palillo con cabeza de algodn humedecido en alcohol isoproplico (limpieza).
Si no funciona nada de lo de arriba, pngase en contacto con el representante de servicio. Cabezal de impresin Cabezal de impresin
Rodillos
COLOCACIN DE ETIQUETAS
CINTA LAMINADA
La varilla suministrada permite que, en las cintas laminadas, usted pueda extraer facilmente el papel del dorso de la etiqueta.
1 2 3 4
Tome la cinta con la mano izquierda, con la superficie impresa arriba, y tome la varilla con la mano derecha. Pase la mitad de la cinta por el orificio estrecho largo de la varilla. Gire tres cuartos de vuelta la varilla hacia usted y separe la varilla de usted como se muestra abajo. Pele el papel del dorso de la etiqueta.
C AB
DE
GH AB CD EF
CINTAS DE TELA
La cinta de tela se emplea para adherir un trozo de tela impresa con el texto en prendar de vestir empleando una plancha. Despus de imprimir el texto en la cinta de tela y de haber cortado la etiqueta empleando unas tijeras, coloque la etiqueta sobre una prenda planchada en la posicin el la que desee ponerla de modo que el texto impreso pueda leerse correctamente. Cubra la etiqueta con otra tela y emplee un ajuste de la plancha de temperatura medio-alta (320 a 356F (160 a 180 C)) para presionar con firmeza durante 10 a 15 segundos. Para ms detalles, consulte las instrucciones suministradas con el casete de cinta de tela.
CINTAS DE MEMBRETES
Consulte las pginas 19 para encontrar la explicacin detallada sobre el empleo de cintas de membretes para hacer membretes.
Si el cursor est en la primera lnea del texto, se mover al principio de la lnea. Para mover el cursor varias lneas hacia arriba: q Mantenga presionado Home hasta que el cursor se mueva a la posicin deseada.
Para mover el cursor al principio de todo el texto: q Mantenga presionado y presione Home .
Si el cursor est en la ltima lnea del texto, se mover al nal de la lnea. Para mover el cursor varias lneas hacia abajo: q Mantenga presionado End hasta que el cursor se mueva a la posicin deseada.
Para mover el cursor al final de todo el texto: q Mantenga presionado y presione
End
TECLA CODE
Para emplear una funcin impresa encima de la tecla: q Mantenga presionado y presione la tecla que est inmediatamente debajo de la funcin deseada.
TECLA ALT
Para escribir los caracteres impresos en color del lado derecho de las teclas:
Symbol
Mantenga presionado
Symbol
TECLA SHIFT
Para escribir una letra mayscula o un smbolo impreso en la esquina superior izquierda de la tecla: Caps q Mantenga presionado y presione la tecla de la letra o smbolo deseado.
Caps
. Le permite escribir
letras maysculas continuamente. Para escribir muchas letras maysculas: Caps 1 Mantenga presionado y presione . El indicador de Caps, de la izquierda del visualizador, se encender. 2 Presione las teclas de las letras o smbolos deseados. Caps
Para salir del modo Caps, mantenga presionado gar el indicador de Caps.
y presione
. Se apa-
TECLA DE RETORNO
Al igual que en una mquina de escribir o procesador de texto, la tecla de retorno ( ) de esta mquina se emplea para poner fin a una lnea de texto y empezar otra. Cuando haya terminado de introducir una lnea, presione la tecla de retorno para hacer una lnea nueva y mover al cursor a la misma.
Un bloque slo puede contener un mximo de tres lneas de texto. Si presiona cuando el cursor est situado en la tercero lnea, aparecer el mensaje de error 3 LINE LIMIT!.
Nmero mximo de lneas que pueden imprimirse 1 2 3 3
Anchuras de cinta 1/4 (6 mm) 3/8 (9 mm) 1/2 (12 mm) 3/4 (18 mm)
La tecla de retorno tambin podr utilizarse para seleccionar un tem de una lista (p. ej., aadir un smbolo o un carcter acentuado al texto) o para aplicar un ajuste seleccionado. Es posible que aparezcan en el visualizador de LCD algunas preguntas para que confirme un comando, especialmente cuando la funcin que usted ha seleccionado es para borrar o afectar archivos. En estos casos, si presiona es como si respondiera s.
Clear
10
TABULACIN
Esta funcin le permitir separar secciones de una lnea de texto aadiendo tabulaciones. Esto le permitir crear columnas perfectamente alineadas sin tener que introducir varios espacios. Todas las tabulaciones tendrn la misma longitud y se medirn desde el comienzo de la lnea, o de la tabulacin anterior, si es que existe. La longitud de las tabulaciones podr ajustarse entre 0,0 y 11,8 (0,0 y 30,0 cm).
1 2
y presione
End
Para cambiar las unidades (pulgadas o centmetros) utilizadas para la indicacin de la longitud de las tabulaciones, presione dades deseadas. hasta que se visualicen las uni-
Presione
Mantenga pulsada
. La marca de tabulacin (
Si el texto delante de una tabulacin sobrepasa el punto en el que tiene que comenzar la seccin siguiente de texto, tal texto comenzar en la siguiente posicin de tabulacin. Por ejemplo, si la longitud est ajustada a 2 y escribe el texto siguiente:
1: A B C D E F G H I 2: J K L M N O P Q R S T U
11
GHI U
Margen
12
La tecla de borrado (
posicin actual del cursor. Se diferencia de la tecla del cursor izquierda ( ) que slo mueve el cursor sin borrar ningn carcter. La tecla de borrado tambin puede utilizarse para abandonar la mayor parte de funciones y volver a la visualizacin anterior sin cambiar el texto. Es posible que aparezcan en el visualizador de LCD algunas preguntas para que confirme un comando, especialmente cuando la funcin que usted ha seleccionado es para borrar
Clear
es como si respondiera s.
Presione , , Home , o End para situar el cursor debajo del carcter que est inmediatamente a la derecha del carcter que usted desea borrar.
Clear
2 1
Presione
una vez.
Para borrar una secuencia de caracteres: Presione , , Home , o End para situar el cursor debajo del carcter que est inmediatamente a la derecha del ltimo carcter que usted desea borrar.
Clear
13
1 2
End
y presione
Line Out
una vez.
, se
1 2
y presione
End
3
Presione
14
FUNCIN DE ACENTOS
La funcin de acentos tambin podr utilizarse para aadir caracteres acentuados al
Symbol
Los caracteres acentuados se agrupan de acuerdo con la letra mayscula o minscula con la que se combinan. Hay disponibles los siguientes caracteres acentuados: Letras a A c C e E i Caracteres acentuados e E Letras I n N o O u U Caracteres acentuados
Para escribir un carcter acentuado: Accent 1 Mantenga presionado y presione . Aparecer el mensaje a-u/A-U? en el visualizador. 2 Presione la tecla de la letra acentuada deseada.
Caps
(o mantenga pul-
sada
y presione
o
3 4
Presione Presione
Para escribir una secuencia de caracteres acentuados, mantenga presionada antes de pulsar manteniendo pulsada . Despus contine aadiendo caracteres y presionando . Despus de haber .
15
FUNCIN DE SMBOLOS
Adems de letras, de los smbolos y los nmeros de las teclas, hay 126 marcas adicionales con la funcin de smbolos. Los siguientes smbolos estn disponibles: Para escribir un smbolo: Symbol 1 Mantenga presionado y presione . Aparecer una fila smbolos en el visualizador.
2 3
Presione o Presione
Home
End
antes
16
17
1 2
.
para aplicar el ajuste seleccionado.
Presione
18
FUNCIN DE MEMBRETE
La funcin de membrete le permite crear con rapidez y facilidad sus propios clichs para membretes personalizados. Seleccione esta funcin para centrar automticamente el texto y ajustar la longitud de la cinta y los mrgenes a un formato perfecto para los soportes de pelculas de membrete entintados. Puesto que el soporte del membrete es reutilizable, haga un nuevo clich de membrete y reemplcelo por el que hay en el soporte de pelculas. Para hacer un membrete: 1 Escriba el texto, y despus inserte un casete de pelcula de membretes de tamao medio (3/4 (18 mm)). Stamp 2 Mantenga presionado y presione una vez. Aparecer el mensaje STAMP FORMAT en el visualizador.
Presione
del rea preajustada del mensaje con la longitud y los mrgenes de la cinta automticamente ajustados.
Mirror
4 5
Presione
Presione la palanca de la cuchilla de la cinta, extraiga el papel del dorso del clich del membrete y adhiralo al tampn de tinta o soporte de pelculas.
19
El ajuste del tamao de ajuste inicial es AUTO y el ajuste inicial para el ancho es OFF. El tamao y el ancho actualmente seleccionados siempre se indican con los indicadores de encima del visualizador. Con el ajuste de tamao AUTO, la mquina compara su texto con el ancho de la cinta instalada y ajusta automticamente los caracteres al tamao ms grande posible. Sin embargo, hay tambin otros seis tamaos de puntos disponibles y cada uno puede imprimirse con caracteres anchos. Para cambiar el ajuste del tamao: Size 1 Manteniendo presionada , pulse una vez , y mantenga presionada para hacer que se visualice el tamao actualmente ajustado.
Size
, contine presionando
hasta que se
El ajuste del tamao actual tambin se mostrar en el indicador de tamao situado sobre el visualizador. 3 Para aplicar el ajuste de tamao seleccionado a todo el texto, suelte . Para activar o desactivar la funcin de anchura: Width 1 Manteniendo presionada , pulse una vez , y mantenga presionada
para hacer que se visualice el ancho actualmente ajustado.
Width
2 3
, contine presionando
hasta que se
visualice el ancho actualmente ajustado mediante el indicador del mismo. Para aplicar el ajuste de ancho seleccionado a todo el texto, suelte .
Cuando haya seleccionado el ajuste AUTO y haya instalado una cinta de 18 mm (3/4) de anchura, el texto se imprimir en maysculas y en una sola lnea con un tamao de caracteres de 48 puntos. 20
FUNCIN DE ESTILO
Podr seleccionar entre doce estilos de caracteres distintos que podr aplicar a su texto. Los caracteres que se imprimen utilizando los tamaos ms pequeos pueden resultar difciles de leer si se seleccionan ciertos ajustes de estilos (por ejemplo, (I+SHADOW). Hay disponibles los siguientes ajustes de estilos: NORMAL BOLD (negrilla) I+BOLD (cursiva y negrilla) OUTLINE (perfilado) I+OUTLINE (cursiva y perfilado) SHADOW (sombreado) I+SHADOW (cursiva y sombreado) ITALIC (cursiva) VERTICAL El ajuste de estilo predeterminado es NORMAL. El indicador de estilo de la parte inferior derecha del visualizador mostrar el ajuste de estilo actual cuando seleccione un estilo que no sea NORMAL. Consulte el apartado de Referencia, al final de esta seccin, para ver muestras de los ajustes disponibles. Para cambiar el ajuste del estilo:
Style
Manteniendo presionada
, y mantenga presionada
, contine presionando
hasta que se
visualice el estilo actualmente ajustado mediante el indicador del mismo. El ajuste de estilo actual se mostrar en el indicador de estilo de la esquina inferior derecha del visualizador. Para aplicar el ajuste de estilo seleccionado a todo el texto, suelte .
21
FUNCIN DE SUBRAYADO
Podr acentuar el texto subrayndolo. El ajuste de subrayado predeterminado es OFF. Cuando haya ajustado la funcin de subrayado a ON, el indicador de subrayado de la parte derecha del visualizador se encender.
ACTIVADO
Manteniendo presionada
, y mantenga presionada
, contine presionando
hasta que se
visualice el subrayado actualmente ajustado mediante el indicador del mismo. Cuando seleccione el ajuste ON, el indicador de subrayado se en encender. Para aplicar el ajuste de subrayado seleccionado a todo el texto, suelte .
22
Manteniendo presionada
, y mantenga presionada
, contine presionando
hasta que se
visualice el tipo de caracteres actualmente ajustado mediante el indicador del mismo. El ajuste actual de fuente tambin se mostrar mediante el indicador de fuente de la parte inferior izquierda del visualizador.
REFERENCIA Ajustes del tipo de caracters Muestras de tipos de caracters Indicadores del visualizador
HELSINKI
Font 1
BRUSSELS
Font 2
23
FUNCIN DE MARCOS
Con la funcin de marcos, podr seleccionar diversos marcos y funciones destacadas para hacer un diseo ms decorativo o una etiqueta con ms nfasis. Los ajustes de marcos siguientes estn disponibles: OFF, ROUND, CANDY, POINTING, NAMEPLATE, DOT El ajuste inicial de marco es OFF, aunque hay tambin otros ajustes. Si se selecciona cualquier ajuste que no sea OFF, se encender el indicador de marco, situado a la derecha del visualizador. Consulte el apartado de Referencia, al nal de esta seccin, para ver muestras de los ajustes disponibles. Para cambiar el ajuste del marco:
Frame
Manteniendo presionada
, y mantenga presionada
, contine presionando
hasta que se
visualice el marco actualmente ajustado mediante el indicador del mismo. El indicator de marco se enciende si se selectiona un ajuste que no sea OFF.
REFERENCIA Ajustes del marco Muestras de marco Ajustes del marco Muestras de marco
OFF
POINTING
ROUND
NAMEPLATE
CANDY
DOT
24
FUNCIN DE CINTA
La funcin de margen cinta le permite ajustar el tamao de los mrgenes de los lados izquierdo y derecho del texto. El ajuste inicial de margen cinta es FULL, aunque hay tambin disponibles otros tres ajustes. FULL (mrgenes de 25 mm (1)) NONE (sin mrgenes) NARROW (mrgenes de 4 mm (1/6)) HALF (mrgenes de 12 mm (1/2))
Despus de imprimir una etiqueta usando el ajuste NONE de margen cinta, mantenga presionado y presione
Feed
antes de presionar la palanca de la cuchilla de la cinta para cortarla, porque de lo contrario podran cortarse algunos de los caracteres impresos. Despus de imprimir empleando los ajustes de margen cinta NARROW, y HALF, presione la palanca de la cuchilla de la cinta para cortar la etiqueta, y emplee entonces unas tijeras para cortar a lo largo de los puntos (:) impresos para centrar el texto dentro de la etiqueta. Para cambiar el ajuste de la cinta:
Tape
Manteniendo presionada
, y mantenga presionada
2 3
, contine presionando
hasta que se
visualice la cinta actualmente ajustado mediante el indicador del mismo. Para aplicar el ajuste de la cinta seleccionado a todo el texto, suelte .
25
LEFT
RIGHT
CENTER
Manteniendo presionada
, y mantenga presionada
, contine presionando
hasta que se
26
ON
Para activar o desactivar la impresin de espejo:
Mirror
, y mantenga presio-
, contine presionando
hasta que
27
LENGTH FUNCTIN
Aunque la longitud de la etiqueta impresa ajusta automticamente dicha longitud de acuerdo con el texto introducido, es posible que usted desee hacer una etiqueta con una longitud especca. La funcin de longitud le permitir ajustar la longitud de la etiqueta entre 1,6 y 11,8 (4,0 cm y 30,0 cm). El ajuste predeterminado de longitud es OFF. Cuando ponga la funcin de longitud en ON, se encender el indicador de longitud de la parte derecha del visualizador. Si desconecta y vuelve a conectar la alimentacin de la mquina, el ajuste de longitud volver a OFF. Para activar y desactivar la funcin de longitud:
Length
, y mantenga presio-
(texto y ambos mrgenes), y despus haga que se visualice el ajuste de longitud de etiqueta actual (ON u OFF).
Length
Manteniendo presionada
, contine presionando
hasta que se
3 4
Suelte
etiqueta. Presione Home o End para seleccionar la longitud deseada, o utilice las teclas numricas para introducir la longitud.
Para cambiar las unidades (pulgadas o centmetros), presione aparezcan las unidades deseadas.
hasta que
Home
Presione
28
de etiquetas que van a imprimirse. Despus de haber impreso utilizando el ajuste de margen de cinta NONE, man-
tenga pulsada
Feed
avance antes de cortarla, ya que de lo contrario algunos caracteres no se imprimiran. Para hacer avanzar la cinta:
q Mantenga presionado y presione
Feed
25 mm (1) hacia afuera. Para cortar la cinta: q Presione la cinta sobre la palanca de la cuchilla. Para evitar daos en la cinta, no trate de cortarla durante la impresin ni el avance. Si presiona demasiado la palanca de la cuchilla, puede romperse.
29
FUNCIN DE NUMERACIN
Esta funcin podr utilizarse para imprimir muchas copias del mismo texto aumentando en 1 cierto nmero en el texto despus de haber impreso cada etiqueta. Para utilizar la funcin de numeracin: 1 Presione , , Home , o End para colocar el cursor debajo del nmero que desee aumentar.
Number
Mantenga pulsada
y presione
Font
En el visualizador aparecer el
y despus presione
(o presione simplemente
Mirror
).
). El
Para comenzar la impresin de etiquetas, presione nmero de cada copia se visualizar mientras est copindose.
(o
Despus de haber impreso utilizando el ajuste de margen NONE, mantenga pulsada y presione una vez
Feed
antes de cortarla, ya que de lo contrario algunos caracteres no se imprimiran. Para cortar la cinta, presione la palanca del cortador de la misma, y despus utilice unas tijeras para cortar a lo largo de los puntos a fin de separar las etiquetas.
30
y presione
Font
M.Del
Para abandonar la funcin de impresin repetida sin imprimir, mantenga pulRepeat Clear
sada
Mirror
y despus presione
(o
(o presione simplemente
).
Presione
Despus de imprimir empleando el ajuste NONE de margen cinta, mantenga presionado y presione
Feed
antes de cortarla, porque de no hacerlo as algunos caracteres impresos podran quedar cortados. Presione la palanca de la cuchilla de la cinta para cortar la cinta, y emplee luego unas tijeras para cortar a lo largo de los puntos impresos para separar las etiquetas.
31
FUNCIONES DE LA MEMORIA
Usted podr utilizar la memoria para almacenar sus archivos de texto ms frecuentemente utilizados. El texto permanecer en la memoria, incluso despus de haberlo eliminado del visualizador utilizando la funcin de borrado (manteniendo presionada
Clear
y presionando
).
Cuando almacena cada archivo, a ste se le asignar un nmero para poder invocarlo fcilmente. En la memoria podr almacenar hasta 9 archivos de texto, o aproximadamente 300 caracteres. Cada archivo de texto almacenado podr tener un mximo de 99 caracteres. Como, cuando se invoque un archivo de texto con la funcin de invocacin, se invocar una copia del archivo almacenado, el texto podr editar o imprimirse sin cambiar el archivo originalmente almacenado. Cuando ya no necesite un archivo o cuando ya no lo necesite, podr utilizar la funcin de borrado de la memoria. Cuando tenga que insertar nuevas pilas, hgalo antes de cinco minutos de haber extrado las viejas, ya que de lo contrario los archivos de texto almacenados en la memoria se perderan (a menos que la mquina est enchufada en un tomacorriente de la red con el adaptador de alimentacin de CA).
ALMACENAMIENTO DE TEXTO
Para almacenar un archivo de texto:
Store
y presione
Si ya estn almacenados 300 caracteres, en el visualizador aparecer el mensaje de error MEMORY FULL!. Cuando ocurra esto, tendr que borrar un mensaje existente antes de podere almacenar otro nuevo.
Font M.Del
Presione la tecla (
desee almacenar texto. El texto se almacenar en el nmero de archivo seleccionado y el texto previamente mostrado en el visualizador desaparecer.
Si ya hay un archivo almacenado con el nmero de archivo seleccionado, en el visualizador aparecer el mensaje OVERWRITE?, y usted tendr que decidir entre reescribir o borrar tal archivo. Para abandonar la funcin de almacenamiento del texto, mantenga pulsada
Store Clear
y presione
(o simplemente presione
).
32
Par reescribir un archivo almacenado con otro nuevo: q Presione para borrar el archivo previamente almacenado y almacenar el nuevo con el nmero seleccionado.
texto, presione
INVOCACIN DE TEXTO
Para invocar un archivo de texto:
Recall
Mantenga pulsada
Font
y presione
Presione la tecla (
Para hacer que se visualice el texto almacenado en otros nmeros de archivos, presione Home o End , o la tecla correspondiente a otro nmero de archivo. Para abandonar la funcin de invocacin sin invocar texto, mantenga pulRecall Clear
sada
y presione
(o presione simplemente
).
Presione
BORRADO DE UN ARCHIVO
Para borrar un archivo de texto:
M.Del
y presione
33
Font
M.Del
Presione la tecla (
Para hacer que se visualice el texto almacenado en otros nmeros de archivos, presione Home o End , o la tecla correspondiente a otro nmero de archivo. Para abandonar la funcin borra de la memoria sin borrar el archivo de
M.Del
y presione
(o presione simplemente
).
34
SOLUCIN DE PROBLEMAS
Problema Remedio
1. El visualizador se queda en blanco des- Compruebe que el adaptador de CA pus de haber conectado la alimentaest correctamente enchufado. cin de la mquina. Si est empleando pilas alcalinas, compruebe que estn correctamente insertadas. Si las pilas estn gastadas, reemplcelas por otro nuevo. 2. La mquina no imprime o los caracte- Compruebe que el casete de cinta se res impresos quedan borrosos. haya insertado correctamente. Si el casete de cinta est vaco, reemplcelo por otro nuevo. Asegrese de que la cubierta del casete de cinta se haya cerrado. 3. Los archivos de texto almacenados en Si las pilas estn gastadas, reemplcelas la memoria ya no estn ella. por otro nuevo. 4. Los caracteres impresos no se forman Si est empleando pilas alcalinas, quicorrectamente. zs estn gastadas. Pruebe utilizando el adaptador de CA o reemplace las pilas por otras nuevas. 5. Aparece una lnea horizontal en blanco Limpie el cabezal de impresin como a travs de la etiqueta impresa. se ha explicado en la pgina 12. 6. Aparecen franjas. Se ha terminado la cinta. Reemplace el casete de cinta por otro nuevo.
7. La mquina se ha bloqueado (es Desconecte la alimentacin de la decir, no responde cuando se presiona mquina, y entonces, mientras manAlign una tecla). tiene presionado y , vuelva a conectar la alimentacin. El texto y los formatos del visualizador y todos los archivos de texto almacenados en la memoria quedan borrados.
35
Este mensaje aparece si ya Lmite el nmero de lneas a existen cuatro lneas tres pretres. siona .
Este mensaje aparece cuando Reemplace las pilas o emplee las pilas alcalinas instaladas el adaptador de CA. estn gastadas. Este mensaje aparece si man- Introduzca algo de texto antes de iniciar la funcin. tiene pulsada y preLength
siona
introducido texto en el visualizador. Este mensaje aparece si intenta imprimir, pero sin haber introducido texto. Introduzca texto antes de la impresin.
Este mensaje aparece si Introduzca texto antes del intenta almacenar archivo de almacenamiento. texto en la memoria, pero sin haber introducido texto en el visualizador. BUFFER FULL! Este mensaje aparece si Borre algo del texto existente intenta introducir un carcter, para poder introducir ms smbolo, cdigo de barras, texto. retorno, o un espacio cuando ya se han introducido 99 caracteres. Este mensaje aparecer si el cursor est al nal del texto cuando mantenga pulsada
Number
CANT HERE!
y presio.
y presione
nando
36
Causa
Remedio
Este mensaje aparece si se Extraiga el adaptador de alta est empleando un adaptador tensin y conecte el adaptade alta tensin. dor de 9,0V CA 1,2 A. Este mensaje aparecer si Suelte la palanca del cortapresiona la palanca del cortador de cinta. dor de cinta mientras est imprimindose una etiqueta. Este mensaje aparecer si el cursor est al nal del texto cuando mantenga pulsada
Number
INVAL. CHRS!
y presio.
nando
Este mensaje aparece si el Acorte el texto a menos de 1 texto es ms largo de 1 metro metro antes de tratar impricuando trate de imprimirlo. mir. Este mensaje aparecer si uti- Ajuste la longitud de la etiliz la funcin de longitud queta entre 1,6 (4,0 cm) y para ajustar una longitud 11,8 (30,0 cm). inferior a 1,6 (4,0 cm) o ms de 11,8 (30,0 cm). Este mensaje aparecer si uti- Ajuste la longitud de las tabuliz la funcin de longitud de laciones de forma que sea tabulaciones para ajustar una inferior a 11,8 (30,0 cm). longitud superior a 11,8 (30,0 cm).
LINE LIMIT!
Este mensaje aparece si el Reduzca el nmero de lneas nmero de lneas del texto es o instale una cinta ms mayor que el nmero ancha. mximo de lneas posible para la cinta instalada. Este mensaje aparecer si intenta almacenar un archivo de texto despus de haber almacenado ya 300 caracteres en la memoria. Borre un archivo que no desee para dejar espacio para el nuevo.
MEMORY FULL!
37
Causa
Remedio
Este mensaje aparece si Almacene primero un intenta llamar o borrar un archivo de texto. archivo de texto de la memoria cuando realmente no hay ninguno almacenado. Este mensaje aparecer si el nmero ajustado para imprimirse utilizando la funcin de numeracin es inferior al situado sobre el cursor. Este mensaje aparece si hay algn problema con la memoria de acceso aleatorio de la mquina. Presione la tecla correspondiente a un nmero superior al del texto.
RAM PROBLEM!
Este mensaje aparece cuando Reemplace las pilas o emplee las pilas alcalinas instaladas el adaptador de CA. estn casi gastadas. Este mensaje aparece si hay algn problema con la memoria de acceso aleatorio de la mquina. Este mensaje aparece si hay algn problema con el software de la mquina. Pngase en contacto con su representante de servicio.
Este mensaje aparecer si Instale un casete de cinta y intenta imprimir una etiqueta pruebe de nuevo. o alimentar cinta cuando haya casete de cinta instalado. Este mensaje aparecer si ya ha ajustado 50 tabulaciones en el texto cuando presione
Tab
TAB LIMIT!
. TEXT TOO HIGH! Este mensaje aparece si el tamao del texto es ms grande que el ancho de la cinta instalada. Reduzca el tamao de los caracteres o instale una cinta ms ancha.
38
Causa
Remedio
Este mensaje aparece si la Borre algo de texto, reduzca longitud del texto es mayor el ancho de los caracteres o que la longitud que se ha incremente la longitud ajusajustado para la etiqueta utilitada de la etiqueta. zando la funcin de longitud.
39
ESPECIFICACIONES
HARDWARE
Dispositivo de entrada: LCD: Teclado de 52 teclas 7 5 puntos 12 caracteres 2 lneas 17 indicadores Sensible a la presin, base adhesiva, 8 m (263) de longitud Cuatro anchos disponibles: 6 mm (1/4) 9 mm (3/8) 12 mm (1/2) 18 mm (3/4) Seis pilas alcalinas AA (AM3, LR6) o adaptador de CA opcional Desconexin automtica de la alimentacin si no se pulsa ninguna tecla durante 5 minutos 128 puntos / 180 dpi 178 (An) 205 (Prf) 60 (Al) mm (7 8 1/6 2 23/63) 700 g (1.5 lbs) (sin casete de cinta ni pilas instalados)
Cinta de impresin:
Alimentacin:
SOFTWARE
Tamao de la memoria intermedia: Tamao de la memoria: Tamao de caracteres: Mximo de 99 caracteres Una lnea 1 m Mximo de tres lneas 300 caracteres Seis tamaos (6, 9, 12, 18, 24 y 36 puntos) + 48 puntos (Maysculas solamente) Todos disponibles en el modo normal y ancho (wide) Normal, perlado, negrilla, sombreado (todos pueden combinarse con cursiva), y Vertical
Estilos de impresin:
40
ACCESORIOS
q Accesorios de consumo Adquiera los casetes de cinta en el distribuidor autorizado que le quede ms cerca. Emplee slo cintas Brother TZ con esta mquina. Brother no puede hacerse responsable por los problemas causados por el empleo de accesorios de consumo no autorizados. No emplee cintas que no tengan la marca . Descripcin CANT./ PAQUETE 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 PRECIO
N. de producto TZ-141 TZ-145 TZ-241 TZ-242 TZ-243 TZ-344 TZ-345 TZ-441 TZ-541 TZ-545 TZ-641 TZ-741
Cintas laminadas de 18 mm (3/4) Caracteres negros sobre adhesivo transparente Caracteres blancos sobre adhesivo transparente Caracteres negros sobre adhesivo blanco Caracteres rojos sobre adhesivo blanco Caracteres azules sobre adhesivo blanco Caracteres dorados sobre adhesivo negro Caracteres blancos sobre adhesivo negro Caracteres negros sobre adhesivo rojo Caracteres negros sobre adhesivo azul Caracteres blancos sobre adhesivo azul Caracteres negros sobre adhesivo amarillo Caracteres negros sobre adhesivo verde Caracteres negros sobre adhesivo naranja uoresTZ-B41 cente TZ-M41 Caracteres negros sobre adhesivo claro (MATE) TZ-WB41 Caracteres negros sobre adhesivo Bugs Bunny TZ-WT41 Caracteres negros sobre adhesivo Taz TZ-WS41 Caracteres negros sobre adhesivo Tweety & Sylvester Cintas laminadas de 12 mm (1/2) TZ-131 TZ-231 TZ-232 TZ-335 TZ-121 TZ-221 TZ-325 Caracteres negros sobre adhesivo transparente Caracteres negros sobre adhesivo blanco Caracteres rojos sobre adhesivo blanco Caracteres blancos sobre adhesivo negro Caracteres negros sobre adhesivo transparente Caracteres negros sobre adhesivo blanco Caracteres blancos sobre adhesivo negro $16.99 $17.99 $17.99 $20.99 $14.99 $16.99 $18.99 41 $20.99 $20.99 $20.99 $20.99 $20.99 $24.99 $23.99 $20.99 $20.99 $23.99 $20.99 $20.99 $24.99 $20.99 $23.99 $23.99 $23.99
N. de Descripcin producto TZ-421 Caracteres negros sobre adhesivo rojo Cintas laminadas de 6 mm (1/4) TZ-111 TZ-211 TZ-315 Caracteres negros sobre adhesivo transparente Caracteres negros sobre adhesivo blanco Caracteres blancos sobre adhesivo negro
CANT./ PAQUETE 1 1 1 1
Cintas especiales N. de producto TZ-SE4 TZ-FA3 Descripcin Caracteres negros sobre cinta de seguridad de 18 mm (3/4) Caracteres azulese sobre cinta de tela de 12 mm (1/2) CANT./ PAQUETE 1 1 PRECIO $29.99 $24.99
JUEGO DE MEMBRETES N. de producto SK-LB SK-MB SH-LB SH-MB Descripcin Juego para hacer sellos para sello con tinta grande Juego para hacer sellos para sello con tinta medio Estampador adicional para sello con tinta grande Estampador adicional para sello con tinta medio negra negra negra negra CANT./ PAQUETE 1 1 1 1 PRECIO $39.99 $37.99 $27.99 $24.99
42