Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Note: The annex below details how to perform the abovementioned steps using screenshots. Detailed instruction of visualizing an RF-vu project within Planet are also found in the Planet help document.
Annex:
Defining a building in RF-vu Defining Layout Plans Defining a Building Contour in RF-vu Defining a Scale on a Layout Plan Definition of a Donor site in RF-vu to be viewed in Planet Viewing an RF-vu project in Planet
Press this icon to see the Building Properties. You can rename or set the Reference point coordinates of a Building. Longitude/Latitudes are in WGS 84 format
Select the Building and press this icon if you want to delete a Building.
3. Select a Layout plan and drag it toward the Building to assign the layout plan to that Building
2. Select a Building then press F2 to rename and press Enter to confirm the change Or Right click a building name to edit
3b. Custom text will appear in the Title block of the layout plan
5. Select your plan file (any types of images, PDF or DWG) 6. You can choose how your image is imported in RF-VU if you wish to make it fit in your page choose one of the following from the drop down
4. Click Open
5. You then select the layers that will represent your walls in RF-Vu.
6. You then choose how you want the walls to be assigned for each layer
7. Depending on the previous Material assignation, you will be asked each layer or all layers with a material defined in the database
Click OK
If the Autocad file does not contain height information about the layers, you then need to select a desired height for those 2D objects. IMPORTANT: Please note that the height will not be higher than the value you have in RF-Vu. You will need to set it in your Plan or project properties (See section E below)
Once walls are imported into RF-vu, you will be able to remove unneeded layers from your layout plan using the Wall simplification tool.
Reference point
Double clicking on the reference point will open up the Building properties menu.
1. Place the building reference point at the location where the Longitude/Latitude coordinates of the building where taken. 2. Right click and choose lock reference point.
2. The next step would be to create your floor on the layout plan
6. Set Part ID variable for all components which are assigned to this floor plan. Refer to section Error! 7. If you source not found. Referencewant to bypass the default 3D heights in your project properties you can do it here
5. Accounts for vertical and horizontal drops for cable going through several Layout Plans (can be confirmed for each individual cable as well)
It is also possible to lock the Layout Plans size and position on the screen by doing a right-click from the context when the cursor is positioned over the Layout Plan:
Once the user has pressed the Configure scale button, these steps must be followed: RF-vu allows to set the scale in the plan properties or Set scale directly on the layout plan using a ruler.
Method 1
1. Add a layout plan and open the Plan properties
3. In the Scale configuration, locate the vector and set its distance then click OK to confirm the scale
Method 2
1. On the Layout plan, select Ruler and draw the desired setting scale. 2. Double click to open the line properties
4. Press Set horizontal and vertical scale and click OK to confirm the selection.
Setting scale of a layout plan using Ruler is helpful when you import walls directly from an AutoCAD file.
1. Choose the same Technology that is being used for the donor site in Planet.
4. The coordinates of the Donor site are optional. 2. Set the Site ID as defined in Planet.
Viewing an RF-vu project in Planet Importing and viewing an RF-vu project in Planet oject
1. Open Planet. 2. Open a Planet project file.
3.
6. Once the project has been imported to the Indoor Projects folder right click to View it or launch the project in RFvu
Donor site