Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
VERSA-LAM BEAMS
US Version
Oct 16 2009
Better Framing
Doesn't Have to Cost More
Table of Contents
labor and materials waste are considered. There's less sorting and cost
associated with disposing of waste
because you order only what you need.
Although our longer lengths help your
clients get the job done faster, they cost
no more.
Environmentally Sound
As an added bonus, floor and roof
systems built with AJS Joists require
about half the number of trees as those
built with dimension lumber. This helps
you design a home both you and future
generations will be proud to own.
Boise Rimboard
Boise Engineered Wood Products
offer several engineered rimboard
products regionally, including
BC RIM BOARD OSB, BC RIM
BOARD and VERSA-RIM (check
supplier or Boise EWP representative for availability). These products
work with AJS Joists to provide a
solid connection at the critical floor/
wall intersection.
ALLJOIST
Product
Profiles
$//-2,67 3URGXFW3URILOHV
$//-2,67
3URGXFW3URILOHV
$//-2,67
$//-2,67
3URGXFW3URILOHV
3URGXFW3URILOHV
AJS 25
$-6
$-6
$-6
$-6Depths
$-6
'
$-6 $-6
$-6
$-6 $-6
$-6 $-6
'HHS'HSWKV
$-6$-6
6
$-6
$-6$-6
$-6
$-6$-6
$-6
'HHS'HSWKV
$-6
'HHS'HSWKV
$-6
Deeper
AJS 140
AJS 20
AJS 25
10/15/09
increase the joist depth, limit joist deflections, glue and screw a
thicker, tongue-and-groove subfloor, install the joists vertically
plumb with level-bearing supports, and install a direct-attached
ceiling to the bottom flanges of the joists.
The floor span tables listed below offer three very different
performance options, based on performance requirements of
thehomeowner.
CAUTION
FOUR STAR
CAUTION
24"
o.c.
12"
o.c.
16"
o.c.
19.2"
o.c.
11'11''
11'1''
19'7''
17'0''
15'6''
13'10''
13'6''
12'9''
11'10''
21'1''
19'3''
18'2''
16'4''
16'1''
14'8''
13'9''
12'9''
22'10''
20'10''
19'8''
18'1''
15'9''
16'6''
15'1''
14'2''
13'2''
22'5''
19'4''
17'8''
15'9''
19'6''
18'2''
17'8''
16'1''
15'2''
14'1''
25'1''
22'10''
20'10''
18'7''
22'5''
21'2''
18'3''
19'2''
17'5''
16'5''
15'3''
27'2''
24'10''
22'10''
18'3''
25'8''
23'6''
22'2''
19'1''
20'1''
18'4''
17'3''
16'0''
28'5''
25'1''
22'10''
19'1''
25
27'10''
25'5''
22'11''
18'4''
21'9''
19'9''
18'7''
17'3''
30'10''
27'7''
22'11''
18'4''
20
28'6''
26'0''
24'1''
19'3''
22'3''
20'3''
19'1''
17'9''
31'2''
27'0''
24'1''
19'3''
25
30'10''
27'10''
23'2''
18'6''
24'1''
21'11''
20'8''
18'6''
34'1''
27'10''
23'2''
18'6''
18"
25
34'5''
31'5''
29'8''
27'7''
27'0''
24'7''
23'2''
21'6''
38'1''
34'9''
32'4''
28'11''
20"
25
37'4''
34'0''
32'1''
29'11''
29'3''
26'7''
25'1''
23'3''
41'3''
37'6''
34'2''
30'7''
22"
25
40'1''
36'7''
34'6''
32'0''
31'5''
28'7''
26'11''
25'0''
44'3''
39'3''
35'10''
32'0''
24"
25
42'10''
39'0''
36'10''
33'5''
33'7''
30'7''
28'9''
26'9''
47'3''
40'11''
37'4''
33'5''
Joist
Depth
9"
11"
14"
24"
o.c.
MINIMUM STIFFNESS
ALLOWED BY CODE
ALLJOIST
Series
12"
o.c.
16"
o.c.
19.2"
o.c.
140
17'9''
16'3''
15'4''
13'10''
13'10''
12'8''
20
19'0''
17'5''
16'5''
15'3''
14'10''
25
20'8''
18'10''
17'9''
16'7''
140
21'2''
19'4''
17'8''
20
22'8''
20'8''
25
24'7''
20
16"
12"
o.c.
Table values based on residential floor loads of 40 psf live load and 10 psf
dead load (12 psf dead load for AJS 25 joists).
Table values assume that 23/32" min. plywood/OSB rated sheathing is glued
and nailed to joists.
Table values represent the most restrictive of simple or multiple span
applications.
Table values are the maximum allowable clear distance between supports.
Analyze multiple span joists with BC CALC sizing software if the length of
any span is less than half the length of an adjacent span.
16"
o.c.
19.2"
o.c.
24"
o.c.
Table values assume minimum bearing lengths without web stiffeners for joist
depths of 16" inches and less (18" joists and deeper require web stiffeners at
all bearing locations).
Floor tile will increase dead load and may require specific deflection limits,
contact Boise EWP Engineering for further information.
This table was designed to apply to a broad range of applications. It may
be possible to exceed the limitations of this table by analyzing a specific
application with the BC CALC sizing software.
Shaded values do not satisfy the requirements of the North Carolina State Building Code. Refer to the THREE STAR table when spans exceed 20 feet.
3. Two layers " Type C or two layers " Type X gypsum board
23
10/15/09
Floor Framing
127(
7KHLOOXVWUDWLRQEHORZLVVKRZLQJVHYHUDOVXJJHVWHG
DSSOLFDWLRQVIRUWKH%RLVH(:3SURGXFWV,WLVQRW
LQWHQGHGWRVKRZDQ
DFWXDOKRXVHXQGHUFRQVWUXFWLRQ
AJS Joists
$-6EORFNLQJRU[VTXDVKEORFNRQ
HDFKVLGHUHTXLUHGZKHQVXSSRUWLQJD
ORDGEHDULQJZDOODERYH
120,'63$1%5,'*,1*,65(48,5('
)25$//-2,67352'8&7
)25,167$//$7,2167$%,/,7<
7HPSRUDU\VWUXWOLQHV[PLQ
RQ
FHQWHUPD[)DVWHQDWHDFKMRLVWZLWK
GQDLOVPLQLPXP
5
:KHQLQVWDOOLQJ%RLVH(:3
SURGXFWVZLWKWUHDWHGZRRG
XVHRQO\FRQQHFWRUVIDVWHQHUV
WKDWDUHDSSURYHGIRUXVHZLWK
WKHFRUUHVSRQGLQJZRRGWUHDWPHQW
9(56$/$0KHDGHU
RUDQ$-6KHDGHU
NQRFNRXWKROHVDW
DSSUR[LPDWHO\RF
DUHSUHSXQFKHG
'LPHQVLRQOXPEHULV
QRWVXLWDEOHIRUXVH
DVDULPERDUGLQ
$//-2,67
IORRUV\VWHPV
$-6ULPMRLVW
6HHSDJH
6HHSDJHIRU
DOORZDEOHKROHVL]HV
DQGORFDWLRQ
%RLVH5LPERDUG
6HHSDJHVDQG
)RUORDGEHDULQJFDQWLOHYHUGHWDLOVVHHSDJH
9(56$/$0/9/EHDP
(QGZDOOEORFNLQJDVUHTXLUHGSHU
JRYHUQLQJEXLOGLQJFRGH
$-6%ORFNLQJLVUHTXLUHGZKHQMRLVWV
DUHFDQWLOHYHUHG
BCI Joists, VERSA-LAM and ALLJOIST must be stored, installed and used in accordance
with the Boise EWP Installation Guide, building codes, and to the extent not inconsistent with
the Boise EWP Installation Guide, usual and customary building practices and standards.
VERSA-LAM , ALLJOIST, and BCI Joists must be wrapped, covered, and stored off of
the ground on stickers at all times prior to installation. VERSA-LAM , ALLJOIST and BCI
Joists are intended only for applications that assure no exposure to weather or the elements
and an environment that is free from moisture from any source, or any pest, organism or
substance which degrades or damages wood or glue bonds. Failure to correctly store, use
or install VERSA-LAM , ALLJOIST, and BCI Joist in accordance with the Boise EWP
Installation Guide will void the limited warranty.
SAFETY WARNING
DO NOT ALLOW WORKERS ON AJS JOISTS UNTIL ALL
HANGERS, AJS RIM JOISTS, RIM BOARDS, AJS BLOCKING
PANELS, X-BRACING AND TEMPORARY 1x4 STRUT LINES ARE
INSTALLED AS SPECIFIED BELOW. SERIOUS ACCIDENTS CAN
RESULT FROM INSUFFICIENT ATTENTION TO PROPER BRACING
DURING CONSTRUCTION. ACCIDENTS CAN BE AVOIDED UNDER
NORMAL CONDITIONS BY FOLLOWING THESE GUIDELINES:
Build a braced end wall at the end of the bay, or permanently install
the first eight feet of AJS Joist and the first course of sheathing. As
an alternate, temporary sheathing may be nailed to the first four feet
of AJS Joist at the end of the bay.
All hangers, AJS rim joists, rim boards, AJS blocking panels, and
x-bracing must be completely installed and properly nailed as each
AJS Joist is set.
Install temporary 1x4 strut lines at no more than eight feet on center
as additional AJS Joists are set. Nail the strut lines to the sheathed
area, or braced end wall, and to each AJS Joist with two 8d nails.
The ends of cantilevers must be temporarily secured by strut lines on
both the top and bottom flanges.
Straighten the AJS Joist to within 1/2 inch of true alignment before
attaching strut lines and sheathing.
Remove the temporary strut lines only as required to install the
permanent sheathing.
Failure to install temporary bracing may result in sideways buckling or
roll-over under light construction loads.
Do not stack construction materials (sheathing, drywall, etc) in the
middle of AJS Joist spans, contact Boise EWP Engineering for
proper storage and shoring information.
ALLJOIST Specifier Guide - UNITED STATES
10/15/09
Additional floor framing details available with BC FRAMER software (see page 31)
END BEARING DETAILS
F07
F07A
F02
F01
$-6
ULPMRLVW
Nail Boise
Rimboard to
AJS Joists
with 8d nail
into each
flange.
F27A
'LPHQVLRQOXPEHULV
QRWVXLWDEOHIRUXVH
DVULPERDUGZLWK
$-6-RLVWV
7RS)ODQJHRU)DFH
0RXQW-RLVW+DQJHU
F52
F08
F03
6ROLGEORFN
DOOSRVWV
IURPDERYH
WREHDULQJ
EHORZ
PLQLPXP
EHDULQJOHQJWK
7ROLPLWVSOLWWLQJIODQJHVWDUWQDLOVDW
OHDVWIURPHQG1DLOVPD\QHHGWR
EHGULYHQDWDQDQJOHWROLPLWVSOLWWLQJRI
EHDULQJSODWH
9(56$/$0
$-6
EORFNLQJ
AJS 25
requires
2x6 wall for
minimum
bearing.
1RWH$-6IORRUMRLVWPXVWEHGHVLJQHGWR
FDUU\ZDOODERYHZKHQQRWVWDFNHGRYHU
ZDOOEHORZ
)RUORDGEHDULQJZDOODERYH
VWDFNHGRYHUZDOOEHORZ
%ORFNLQJPD\EHUHTXLUHGFRQVXOWGHVLJQSURIHVVLRQDO
RIUHFRUGDQGRUORFDOEXLOGLQJRIILFLDO
Size
$-6-RLVW
EORFNLQJ
2x4
2x6
/RDGEHDULQJ
ZDOODERYH
VWDFNHGRYHU
ZDOOEHORZ
-RLVW
+DQJHU
%DFNHUEORFN
PLQLPXP
ZLGH1DLOZLWK
GQDLOV
)LOOHUEORFN1DLO
ZLWKGQDLOV
%DFNHUEORFNUHTXLUHGZKHUHWRSIODQJH
MRLVWKDQJHUORDGH[FHHGVOEV
,QVWDOOWLJKWWRWRSIODQJH
F58
)LOOHU%ORFN
VHHFKDUWEHORZ
:HE)LOOHU
1DLOLQJ
RQFHQWHU
&RQQHFWLRQYDOLGIRUDOO
DSSOLFDWLRQV&RQWDFW%RLVH(:3
(QJLQHHULQJIRUVSHFLILFFRQGLWLRQV
LATERAL SUPPORT
AJS Joists must be laterally supported at the ends
with hangers, AJS rim joists, rim boards, AJS
blocking panels or x-bracing. AJS blocking panels or
x-bracing are required at cantilever supports.
Blocking may be required at intermediate bearings for
floor diaphragm per IRC in high seismic areas, consult
local building official.
MINIMUM BEARING LENGTH FOR AJS JOISTS
1 inches is required at end supports. 3 inches is
required at cantilever and intermediate supports.
Longer bearing lengths allow higher reaction values.
Refer to the building code evaluation report or the
BC CALC software.
NAILING REQUIREMENTS
AJS rim joist, rim board or closure panel to AJS Joist:
Rims or closure panel 1 inches thick and less:
2-8d nails, one each in the top and bottom flange.
AJS 140/20 rim joist: 2-16d box nails, one each
in the top and bottom flange.
AJS 25 rim joist: Toe-nail top flange to rim joist
with 2-10d box nails, one each side of flange.
AJS rim joist, rim board or AJS blocking panel to
support:
8d nails at 6 inches on center.
When used for shear transfer, follow the building
designer's specification.
ALLJOIST Specifier Guide - UNITED STATES
'RXEOH$-6 -RLVW
&RQQHFWLRQ
F10
12
4463
7013
[EORFN
$-6-RLVW6ORSH&XW5HLQIRUFHPHQW
F09
F05
$-6
EORFNLQJ
UHTXLUHGIRU
FDQWLOHYHU
)RUORDGEHDULQJFDQWLOHYHUVHHSDJHV
DQG8SOLIWRQEDFNVSDQVKDOOEH
FRQVLGHUHGLQDOOFDQWLOHYHUGHVLJQV
AJS 140
AJS 20
AJS 25
Backer Block
Thickness
1" or two "
wood panels
1" or two "
wood panels
2 x _ lumber
'HWDLOEHORZUHVWRUHVRULJLQDODOORZDEOH
VKHDUUHDFWLRQYDOXHWRFXWHQGRI$-6MRLVW$-6
-RLVWVKDOOQRWEHXVHGDVDFROODURUUDIWHUWHQVLRQWLH
[PLQUDIWHU5DIWHUVKDOO
EHVXSSRUWHGE\ULGJHEHDPRU
RWKHUXSSHUEHDULQJVXSSRUW
PLQ
F14
+HHO
'HSWK
VHH
WDEOH
EHORZ
PD[
$-6
GHSWK
[EORFNLQJUHTXLUHGDWEHDULQJQRWVKRZQIRUFODULW\
PLQSO\ZRRG26%UDWHGVKHDWKLQJDVUHLQIRUFH
PHQW,QVWDOOUHLQIRUFHPHQWZLWKIDFHJUDLQKRUL]RQWDO
,QVWDOORQERWKVLGHVRIWKHMRLVWWLJKWWRERWWRPIODQJH
JDSEHWZHHQUHLQIRUFHPHQWDQGERWWRPRIWRSIODQJH
$SSO\FRQVWUXFWLRQDGKHVLYHWRFRQWDFWVXUIDFHVDQG
IDVWHQZLWKURZVRIPLQGER[QDLOVDWRF
$OWHUQDWHQDLOLQJIURPHDFKVLGHDQGFOLQFK
6KHDWKLQJRU
ULPERDUG
FORVXUH
Series
$-6ULPMRLVW
End Wall
Bearing 6/12
2x4
2x6
4"
3"
9/12
10/12 12/12
45 16" 4"
33 16" 25 16"
7/12
4"
2"
4"
29 16"
4"
2"
Vertical Load
Transfer Capacity
(plf)
9"
1875
11"
1680
14"
1500
16"
1340
18" - 20"
3200 (1)
Double 2 x __ lumber
22" - 24"
2700 (1)
10/15/09
AJS Joists are manufactured with 11/2" round perforated knockouts in the web at approximately 12" on center
0LQLPXPVSDFLQJ [JUHDWHVWGLPHQVLRQ
RIODUJHVWKROHNQRFNRXWVH[HPSW
'
'
DO NOT
cut or notch
flange
VHHWDEOHEHORZ
VHHWDEOHEHORZ
$URXQGKROHPD\EH
FXWDQ\ZKHUHLQWKHZHE
3URYLGHDWOHDVWRI
FOHDUDQFHIURPRWKHUKROHV
1RKROHVH[FHSWNQRFNRXWV
DOORZHGLQEHDULQJ]RQHV
'RQRWFXWKROHV
ODUJHUWKDQ
URXQGLQFDQWLOHYHUV
DO
cut in web area
as specified
Minimum distance from support, listed in table below, is required for all holes greater than 1"
MINIMUM DISTANCE (D) FROM ANY SUPPORT TO THE CENTERLINE OF THE HOLE
Round Hole Diameter [in]
Rectangular Hole Side [in]
8
Any
Span
9"
12
[ft]
Joist
16
Round Hole Diameter [in]
Rectangular Hole Side [in]
8
Any
12
Span
11"
[ft]
16
Joist
20
Round Hole Diameter [in]
Rectangular Hole Side [in]
8
12
Any
Span
14"
16
[ft]
Joist
20
24
Round Hole Diameter [in]
Rectangular Hole Side [in]
8
12
Any
Span
16"
16
[ft]
Joist
20
24
Round Hole Diameter [in]
Rectangular Hole Side [in]
8
12
16
18"
Span
[ft]
AJS 25
20
24
28
Round Hole Diameter [in]
Rectangular Hole Side [in]
8
12
16
20"
Span
[ft]
AJS 25
20
24
28
Round Hole Diameter [in]
Rectangular Hole Side [in]
10
14
18
22"
Span
[ft]
AJS 25
22
26
30
Round Hole Diameter [in]
Rectangular Hole Side [in]
10
14
18
24"
Span
[ft]
AJS 25
22
26
30
2
2'-3''
3'-5''
4'-6''
2
1'-7''
2'-5''
3'-2''
4'-0''
2
1'-1''
1'-8''
2'-3''
2'-10''
3'-5''
2
1'-0''
1'-2''
1'-7''
1'-11''
2'-4''
2
1'-0''
1'-0''
1'-0''
1'-0''
1'-0''
1'-0''
2
1'-0''
1'-0''
1'-0''
1'-0''
1'-0''
1'-0''
2
1'-0''
1'-0''
1'-0''
1'-0''
1'-0''
1'-0''
2
1'-0''
1'-0''
1'-0''
1'-0''
1'-0''
1'-0''
3
2'-8''
4'-0''
5'-5''
3
1'-11''
2'-11''
3'-11''
4'-11''
3
1'-5''
2'-2''
2'-11''
3'-7''
4'-4''
3
1'-1''
1'-7''
2'-1''
2'-8''
3'-2''
3
1'-1''
1'-1''
1'-1''
1'-1''
1'-1''
1'-1''
3
1'-1''
1'-1''
1'-1''
1'-1''
1'-1''
1'-1''
3
1'-1''
1'-1''
1'-1''
1'-1''
1'-1''
1'-1''
3
1'-1''
1'-1''
1'-1''
1'-1''
1'-1''
1'-1''
4
2
3'-1''
4'-8''
6'-3''
4
2'-4''
3'-6''
4'-8''
5'-10''
4
1'-9''
2'-8''
3'-6''
4'-5''
5'-4''
4
1'-4''
2'-0''
2'-8''
3'-5''
4'-1''
4
1'-2''
1'-2''
1'-3''
1'-6''
1'-10''
2'-2''
4
1'-2''
1'-2''
1'-2''
1'-2''
1'-5''
1'-8''
4
1'-2''
1'-2''
1'-2''
1'-2''
1'-2''
1'-2''
4
1'-2''
1'-2''
1'-2''
1'-2''
1'-2''
1'-2''
5
4
3'-6''
5'-4''
7'-1''
5
2
2'-8''
4'-0''
5'-4''
6'-9''
5
2'-1''
3'-1''
4'-2''
5'-3''
6'-3''
5
1'-7''
2'-5''
3'-3''
4'-1''
4'-11''
5
1'-2''
1'-5''
1'-11''
2'-5''
2'-11''
3'-5''
5
1'-2''
1'-2''
1'-7''
1'-11''
2'-4''
2'-9''
5
1'-2''
1'-2''
1'-2''
1'-2''
1'-4''
1'-7''
5
1'-2''
1'-2''
1'-2''
1'-2''
1'-2''
1'-2''
6
6
4'-0
6'-0
8'-0
6
3
3'-0''
4'-7''
6'-1''
7'-8''
6
2
2'-5''
3'-7''
4'-10''
6'-0''
7'-3''
6
1'-11''
2'-11''
3'-10''
4'-10''
5'-10''
6
1'-4''
2'-0''
2'-8''
3'-4''
4'-0''
4'-8''
6
1'-3''
1'-7''
2'-2''
2'-9''
3'-3''
3'-10''
6
1'-3''
1'-3''
1'-7''
1'-11''
2'-4''
2'-8''
6
1'-3''
1'-3''
1'-3''
1'-3''
1'-3''
1'-4''
6
6
4'-0
6'-0
8'-0
6
4
3'-3''
4'-10''
6'-6''
8'-1''
6
3
2'-7''
3'-10''
5'-2''
6'-5''
7'-9''
6
2'-1''
3'-1''
4'-2''
5'-2''
6'-3''
6
1'-6''
2'-3''
3'-0''
3'-9''
4'-6''
5'-3''
6
1'-3''
1'-10''
2'-6''
3'-1''
3'-9''
4'-5''
6
1'-3''
1'-6''
1'-11''
2'-4''
2'-9''
3'-3''
6
1'-3''
1'-3''
1'-3''
1'-4''
1'-7''
1'-11''
7
-
8
-
8 /8
-
9
-
10
-
11
-
12
-
13
-
7
5
3'-5''
5'-1''
6'-10''
8'-6''
7
3
2'-8''
4'-1''
5'-5''
6'-10''
8'-2''
7
2
2'-2''
3'-4''
4'-5''
5'-7''
6'-8''
7
1'-8''
2'-6''
3'-4''
4'-2''
5'-1''
5'-11''
7
1'-5''
2'-1''
2'-10''
3'-6''
4'-3''
4'-11''
7
1'-3''
1'-9''
2'-3''
2'-9''
3'-3''
3'-9''
7
1'-3''
1'-3''
1'-5''
1'-9''
2'-1''
2'-5''
8
7
3'-9''
5'-8''
7'-7''
9'-5''
8
5
3'-0''
4'-7''
6'-1''
7'-7''
9'-2''
8
3
2'-6''
3'-9''
5'-0''
6'-3''
7'-6''
8
2
2'-0''
3'-0''
4'-1''
5'-1''
6'-1''
7'-2''
8
1'-8''
2'-7''
3'-5''
4'-4''
5'-2''
6'-0''
8
1'-7''
2'-3''
2'-11''
3'-7''
4'-3''
4'-10''
8
1'-4''
1'-7''
2'-1''
2'-6''
3'-0''
3'-5''
87/8
8
4'-0
6'-0
8'-0
10'-0
87/8
6
3'-4''
5'-0''
6'-8''
8'-4''
10'-0''
87/8
5
2'-9''
4'-1''
5'-6''
6'-11''
8'-3''
87/8
3
2'-4''
3'-6''
4'-8''
5'-10''
7'-1''
8'-3''
87/8
2
2'-0''
3'-0''
4'-0''
5'-0''
6'-0''
7'-0''
87/8
1'-11''
2'-8''
3'-6''
4'-3''
5'-1''
5'-10''
87/8
1'-5''
2'-0''
2'-7''
3'-2''
3'-9''
4'-4''
9
-
10
-
11
-
12
-
13
-
9
6
3'-4''
5'-0''
6'-9''
8'-5''
10'-1''
9
5
2'-9''
4'-2''
5'-7''
7'-0''
8'-5''
9
3
2'-4''
3'-7''
4'-9''
6'-0''
7'-2''
8'-5''
9
2
2'-0''
3'-0''
4'-1''
5'-1''
6'-1''
7'-2''
9
2'-0''
2'-9''
3'-7''
4'-4''
5'-2''
6'-0''
9
1'-6''
2'-1''
2'-8''
3'-3''
3'-10''
4'-6''
10
8
3'-8''
5'-6''
7'-4''
9'-3''
11'-1''
10
6
3'-1''
4'-7''
6'-2''
7'-9''
9'-3''
10
5
2'-9''
4'-1''
5'-6''
6'-11''
8'-3''
9'-8''
10
3
2'-4''
3'-6''
4'-8''
5'-10''
7'-1''
8'-3''
10
2
2'-4''
3'-3''
4'-3''
5'-2''
6'-1''
7'-1''
10
1'-10''
2'-7''
3'-3''
4'-0''
4'-9''
5'-6''
11
12
13
9
4'-0
6'-0
8'-0
10'-0
12'-0
11
12
13
8
9
10
3'-4''
3'-8'' 3'-11''
5'-1''
5'-6'' 5'-11''
6'-9''
7'-4'' 7'-11''
8'-5''
9'-2'' 9'-11''
10'-2'' 11'-0'' 11'-10''
11
12
13
6
7
9
3'-1''
3'-5'' 3'-10''
4'-8''
5'-2''
5'-9''
6'-3'' 6'-11'' 7'-8''
7'-9''
8'-8''
9'-7''
9'-4'' 10'-5'' 11'-6''
10'-11'' 12'-2'' 13'-5''
11
12
13
5
6
7
2'-8'' 2'-11'' 3'-3''
4'-0''
4'-5'' 4'-11''
5'-4'' 5'-11'' 6'-7''
6'-8''
7'-5''
8'-3''
8'-0'' 8'-11'' 9'-10''
9'-4'' 10'-5'' 11'-6''
11
12
13
3
5
6
2'-8''
3'-1''
3'-5''
3'-9''
4'-4'' 4'-10''
4'-11''
5'-7''
6'-2''
6'-0''
6'-9''
7'-7''
7'-1''
8'-0''
9'-0''
8'-2''
9'-3'' 10'-4''
11
12
13
2
3
4
2'-2''
2'-6'' 2'-10''
3'-0''
3'-6''
4'-0''
3'-11'' 4'-6''
5'-2''
4'-9''
5'-7''
6'-4''
5'-8''
6'-7''
7'-5''
6'-6''
7'-7''
8'-7''
10/15/09
AJS Joists
AJS
20
AJS
25
11"
AJS
140
AJS
20
AJS
25
16
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
19.2
0
0
0
0
0
1
1
X
X
0
0
0
0
0
1
1
1
2
0
0
0
0
0
1
1
2
2
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
KEY TO TABLE
0 . . . .
WS . . . .
1 . . . .
2 . . . .
X . . . .
No Reinforcement Required
Web Stiffeners at Support
Web Stiffeners Plus One Reinforcer
Web Stiffeners Plus Two Reinforcers
Use Deeper Joists or Closer Spacing
55
16
0
1
1
X
X
X
X
X
X
0
1
1
1
2
2
2
X
X
0
1
1
2
2
X
X
X
X
0
0
0
0
0
0
1
1
1
0
0
0
0
0
0
1
1
1
0
0
0
0
0
0
1
1
1
19.2
X
X
X
X
X
X
X
X
X
2
2
2
X
X
X
X
X
X
2
X
X
X
X
X
X
X
X
0
0
1
1
1
X
X
X
X
0
0
1
1
1
1
2
2
X
0
0
1
1
1
2
2
X
X
24
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1
2
X
X
X
X
X
X
X
2
2
2
X
X
X
X
X
X
Roof
Joist
Truss
Depth Joist Span
[in] Series [ft]
AJS
20
14"
9"
AJS
140
24
26
28
30
32
34
36
38
40
24
26
28
30
32
34
36
38
40
24
26
28
30
32
34
36
38
40
24
26
28
30
32
34
36
38
40
24
26
28
30
32
34
36
38
40
24
26
28
30
32
34
36
38
40
35
AJS
25
AJS
20
16"
Roof
Joist
Truss
Depth Joist Span
[in] Series [ft]
AJS
25
35
55
16
19.2
19.2
24
24
WS
WS
26
WS
WS
28
WS
30
WS
WS
32
WS
WS
WS
34
WS
WS
36
WS
WS
38
WS
WS
40
WS
WS
WS
24
WS
26
WS
28
WS
30
WS
32
WS
34
WS
36
38
WS
40
WS
24
WS
WS
26
WS
WS
28
WS
WS
WS
30
WS
WS
WS
32
WS
WS
WS
34
WS
WS
WS
36
WS
WS
WS
WS
38
WS
WS
WS
WS
WS
40
WS
WS
WS
WS
24
WS
26
WS
28
WS
30
WS
WS
32
WS
34
WS
WS
36
WS
WS
38
WS
WS
40
WS
WS
1. Cut 48" long reinforcers to match the joist depth. Use 23/32" APA
Rated Sheathing, Exposure 1, 48/24 Span Rating panels. The
face grain must be horizontal (measure the 48" dimension along
the long edge of the panel).
2. Fasten the reinforcer to the joist flanges with 8d nails at 6" o. c.
When reinforcing both sides, stagger the nails to avoid splitting the
joist flanges.
3. Attach web stiffeners per intermediate Web Stiffener Nailing
Schedule on page 10.
4. Use the BC CALC software to analyze conditions that are not
covered by this table.
10/15/09
23
/32" min. plywood/OSB or
rimboard closure. Nail with
8d nail into each flange.
AJS Joist
blocking
required for
cantilever
Structural Panel
reinforcement
2'-0"
Backer block
2'-0"
F05
F20A
F20B
PLQOHQJWKRI
SO\ZRRG26%UHLQIRUFH
PHQWQDLOHGWRWRSDQG
ERWWRPIODQJHV
%RLVH
5LP%RDUG
%ULFN
ZDOO
3URYLGHIXOO
GHSWKEORFNLQJ
EHWZHHQMRLVWV
PD[
PLQ
(GJHRIKROHVKDOOEHD
PLQRIIURPHQGRI
EORFNLQJSDQHO
Notes:
Roof
Joist Truss
Depth Span
(inches) (ft)
9"
11"
14"
24'
26'
28'
30'
32'
34'
36'
24'
26'
28'
30'
32'
34'
36'
24'
26'
28'
30'
32'
34"
36'
Notes:
20 psf
[VLOOSODWHLI[EHDULQJZDOOVDUH
XVHGD[VLOOSODWHVKDOOEHXVHG
/RDGEHDULQJZDOO
50 psf
12"
16"
19.2"
12"
16"
19.2"
12"
16"
19.2"
12"
16"
19.2"
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
X
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
X
X
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
X
X
0
0
0
0
0
1
1
0
0
0
0
0
0
0
1
1
1
1
1
X
X
0
0
0
0
0
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
X
0
0
0
0
0
1
1
0
0
0
0
0
0
0
1
1
1
1
2
X
X
0
0
1
1
1
1
1
0
0
0
0
0
1
1
0
0
0
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
2
2
X
0
0
1
1
1
1
1
0
0
0
0
0
0
1
1
2
2
2
2
X
X
1
1
1
1
1
1
X
0
0
1
1
1
1
X
Reinforcement Requirements
(Brick Ledge)
Table assumes a 40 psf live load and a
15 psf dead load on the floors, an 80plf
wall load, and a 15 psf dead load on
theroof.
Reinforcement Legend:
0 =
1 =
2 =
X =
No reinforcement required.
Reinforcement required on one side of joist.
Reinforcement required on both sides of joist.
Reinforcement will not work. Reduce spacing
of joist and recheck.
10/15/09
10
Fasten the 2x8 minimum to the AJS Joist by nailing through the backer block and joist
web with 2 rows of 10d nails at 6" on center. Clinch all nails.
F15B
$-6-RLVWEORFNLQJ
:RRG6WUXFWXUDO
3DQHO&ORVXUH
%DFN6SDQ
0D[LPXP
'U\ZDOO&HLOLQJRU
:RRG6WUXFWXUDO
3DQHO6RIILW
%DFN6SDQ
1RWWRH[FHHG
AJS Joist
blocking
Section
View
Minimum 1 Times
Cantilever Length
Back Span
3" min.
bearing
2x Closure
2x8 minimum
Maximum
/3 Back Span
not to exceed
4'-0"
6PDOO*DS
PLQ
PD[
PLQ
PD[
:HE
6WLIIHQHU
:LGWK
F16E
*DS
Joist Depth
Nailing
9" 11"
3-10d
14" 24"
5-10d
AJS 140 / 20 / 25
&OLQFK
1DLOV
PLQ
PD[
7LJKW)LW :HE6WLIIHQHU
UHTXLUHGZKHQ
FRQFHQWUDWHGORDG
H[FHHGVOEV
NOTES
Web stiffeners are optional except as noted below.
Web stiffeners are always required for 18" and deeper AJS joists at all bearing
locations.
Web stiffeners are always required in hangers that do not extend up to support
the top flange of the AJS Joist. Web stiffeners may be required with certain
sloped or skewed hangers or to achieve uplift values. Refer to the hanger
manufacturer's installation requirements.
Web stiffeners are always required in certain roof applications. See Roof
Framing Details on page 14.
Web stiffeners are always required under concentrated loads that exceed
1000pounds. Install the web stiffeners snug to the top flange in this situation.
Follow the nailing schedule for intermediate bearings.
Web stiffeners may be used to increase allowable reaction values. See AJS
Design Properties on page21 of the ASG or the BCCALC software.
:HEVWLIIHQHUVDSSOLHGWR
ERWKVLGHVRIWKHMRLVWZHE
In
Hanger
No
Hanger
Minimum
Width
AJS 140/20
1"
1"
25/16"
AJS 25
&/ KROH
6HH0D[+ROH6L]HRQ
&KDUWIRU-RLVW'HSWK
0LQLPXP[GLDPHWHU
ZLGWKRIODUJHVWKROH
6LPSOH6SDQ-RLVW
0LQ
Notes:
Additional holes may be cut in the web provided they
meet the specifications as shown in the hole distance
chart shown above or as allowed using BC CALC
sizing software.
ALLJOIST Specifier Guide - UNITED STATES
14"
Simple
Span
Multiple
Span
6" x 12"
6" x 7"
8" x 13"
8" x 8"
9" x 16"
8" x 13"
10" x 14"
9" x 11"
11" x 16"
10" x 14"
12" x 15"
11" x 12"
16"
-RLVW
6SDQ
&/ KROH
6HH0D[+ROH6L]HRQ
&KDUWIRU-RLVW'HSWK
0XOWLSOH6SDQ-RLVW
0LQ
&/ KROH
-RLVW
6SDQ
0XOWLSOH6SDQ-RLVW
0LQ
Notes:
Larger holes may be possible for either Single or Multiple span
joists; use BC CALC sizing software for specific analysis.
10/15/09
11
9"
AJS 140
Live
Total
Load
Load
170
131
103
82
67
55
46
313
268
235
208
188
161
136
115
100
87
76
11"
AJS 140
Live
Total
Load
Load
136
111
91
76
64
54
46
40
318
272
238
212
191
173
159
146
129
112
99
87
78
70
63
AJS 20 Series
2" Flange Width
161
128
102
83
69
57
48
41
11"
AJS 20
Live
Total
Load
Load
9"
AJS 20
Live
Total
Load
Load
113
95
80
68
58
50
44
313
268
235
208
188
170
156
144
134
120
106
93
82
318
272
238
212
191
173
159
146
136
127
119
112
106
97
88
79
14"
AJS 20
Live
Total
Load
Load
98
84
73
63
55
49
43
320
274
240
213
192
174
160
147
137
128
120
112
106
101
96
91
87
80
73
16"
AJS 20
Live
Total
Load
Load
85
74
65
58
52
46
41
323
277
242
215
194
176
161
149
138
129
121
114
107
102
97
92
88
84
80
77
72
67
10/15/09
12
316
318
320
323
629
681
697
712
271
272
274
277
539
584
597
610
237
238
240
242
472
511
523
534
211
212
213
215
419
454
464
475
10
190
191
192
194
377
408
418
427
11
172
173
174
176
343
371
380
388
12
158
159
160
161
314
340
348
356
13
131
146
146
147
149
290
314
321
328
14
107
135
136
137
138
269
292
298
305
15
88
126
127
128
129
251
272
278
285
16
74
118
119
120
121
236
255
261
267
17
62
111
102
112
112
114
222
240
246
251
18
53
105
87
106
106
107
209
227
232
237
19
45
91
75
100
101
102
197
198
215
220
225
20
65
95
93
96
97
171
188
204
209
213
21
56
90
81
91
92
150
179
187
194
199
203
22
49
86
71
87
88
132
171
165
185
190
194
23
43
83
62
83
84
84
116
164
146
177
178
181
185
24
55
80
74
80
103
152
129
170
158
174
178
25
49
76
66
77
92
140
115
157
141
167
170
171
26
44
73
59
74
82
129
103
145
127
159
153
164
27
53
71
74
120
93
134
114
147
137
158
28
48
69
66
111
84
125
103
137
124
149
29
43
66
60
104
76
116
93
127
112
139
54
97
69
109
84
119
102
130
30
10/15/09
Roof Framing
13
AJS Rafters
7KHULGJHPXVWEHVXSSRUWHG
E\9(56$/$0/9/EHDPRU
ORDGEHDULQJZDOO
)25,167$//$7,2167$%,/,7<
7HPSRUDU\VWUXWOLQHV[PLQ
IWRQFHQWHUPD[LPXP)DVWHQ
DWHDFKMRLVWZLWKWZRGQDLOV
PLQLPXP
%ORFNLQJRURWKHUODWHUDO
VXSSRUWUHTXLUHGDWHQG
VXSSRUWV
:KHQLQVWDOOLQJ%RLVH(:3SURGXFWVZLWK
WUHDWHGZRRGXVHRQO\FRQQHFWRUV
IDVWHQHUVWKDWDUHDSSURYHGIRUXVHZLWK
WKHFRUUHVSRQGLQJZRRGWUHDWPHQW
%ORFNLQJQRW
VKRZQIRUFODULW\
$-65DIWHU+HDGHU
0XOWLSOH$-65DIWHUVPD\EHUHTXLUHG
SAFETY WARNING
DO NOT ALLOW WORKERS ON AJS JOISTS UNTIL ALL HANGERS, AJS
RIM JOISTS, RIM BOARDS, AJS BLOCKING PANELS, X-BRACING AND
TEMPORARY 1x4 STRUT LINES ARE INSTALLED AS SPECIFIED BELOW.
Build a braced end wall at the end of the bay, or permanently install
the first eight feet of AJS Joists and the first course of sheathing.
As an alternate, temporary sheathing may be nailed to the first four
feet of AJS Joists at the end of the bay.
All hangers, AJS rim joists, rim boards, AJS blocking panels, and
x-bracing must be completely installed and properly nailed as each
AJS Joist is set.
Install temporary 1x4 strut lines at no more than eight feet on center
as additional AJS Joists are set. Nail the strut lines to the sheathed
area, or braced end wall, and to each AJS Joist with two 8d nails.
AJS Ceiling Joist with Bevel End Cut (For Limited-Access Attics Only)
AJS Joist shall not be used as collar/tension tie. Roof rafter shall be
supported by ridge beam or other upper bearing support.
3O\ZRRG26%6KHDWKLQJRU
[1DLOHU#0D[
RF
5RRI5DIWHU
5DIWHU6WUXW
&HLOLQJ/RDGV
/LYH/RDG SVI
'HDG/RDG SVI Notes:
0LQLPXP+HHO'HSWK
6HHWDEOHDWULJKW
RU
$-66HULHV&HLOLQJ-RLVW
#RF0D[LPXP
0LQ
:HE
)LOOHU
0LQLPXP%HDULQJ
[:DOO(DFK(QG
20'-0"
22'-6"
25'-0"
14" AJS 140, 20, 25
(If roof loads present, see Notes 2 & 3 at right)
ALLJOIST Specifier Guide - UNITED STATES
Minimum
Heel
Depths
;%ORFNLQJ
Joist
Depth
2x4
End Wall
2x6
9"
2"
1"
11"
3"
2"
14"
4"
3"
14
R01
[EHYHOHGSODWHIRUVORSH
JUHDWHUWKDQ
R04
GQDLOV
DWRF
[RQHVLGHIRU3/)PD[
[RQHVLGHIRU3/)PD[
%DFNHUEORFN
7KLFNQHVVSHU
FRUUHVSRQGLQJ
$-6VHULHV
6LPSVRQ93$RU863703FRQQHFWRUVRUHTXDOFDQ
EHXVHGLQOLHXRIEHYHOHGSODWHIRUVORSHVIURP
WR
[EORFN
$-6EORFNLQJ
+ROHVFXW
IRUYHQWLODWLRQ
KRUL]
KRUL]
DN05
R03
R02
5LPERDUG9(56$/$0EORFNLQJ
9HQWLODWLRQ9FXW
RIOHQJWKRIGHSWK
[
EORFNLQJ
IRUVRIILW
VXSSRUW
PD[
)ODQJHRI$-6-RLVWVPD\EHELUGVPRXWKFXWRQO\DW
WKHORZHQGRIWKHMRLVW%LUGVPRXWKFXW$-6MRLVW
PXVWEHDUIXOO\RQSODWHZHEVWLIIHQHUUHTXLUHGHDFK
VLGH%RWWRPIODQJHVKDOOEHIXOO\VXSSRUWHG
R07
5LPERDUG9(56$/$0 EORFNLQJ
9HQWLODWLRQ9FXW
RIOHQJWKRIGHSWK
%DFNHUEORFN
PLQLPXPZLGH
1DLOZLWKGQDLOV
'2127EHYHOFXWMRLVW
EH\RQGLQVLGHIDFHRIZDOOH[FHSW
IRUVSHFLILFFRQGLWLRQVLQGHWDLOV
VKRZQRQSDJHVDQGRIWKH
$//-2,676SHFLILHU*XLGH
7LJKWILW
IRUODWHUDO
VWDELOLW\
PD[
R05
6LPSVRQRU863/67$VWUDSQDLOLQJSHU
JRYHUQLQJEXLOGLQJFRGH
$-6EORFNLQJ
+ROHVFXW
IRUYHQWLODWLRQ
'RXEOHEHYHOHG
ZRRGSODWH
R06
)ODQJHRI$-6-RLVWVPD\EH
ELUGVPRXWKFXWRQO\DWWKH
ORZHQGRIWKHMRLVW
%LUGVPRXWKFXW$-6-RLVW
PXVWEHDUIXOO\RQSODWHZHE
VWLIIHQHUUHTXLUHGHDFKVLGH
6LPSVRQRU863/67$VWUDSZKHUHVORSH
H[FHHGVVWUDSVPD\EHUHTXLUHGIRUORZHU
VORSHVLQKLJKZLQGDUHDV1DLOLQJSHUJRYHUQLQJ
EXLOGLQJFRGH
)LOOHUEORFN1DLO
ZLWKGQDLOV
%DFNHUEORFNUHTXLUHGZKHUHWRSIODQJH
MRLVWKDQJHUORDGH[FHHGVOEV
,QVWDOOWLJKWWRWRSIODQJH
R11
/
/
PD[
'RXEOHMRLVWPD\EHUHTXLUHG
ZKHQ/H[FHHGVUDIWHU
VSDFLQJ
%ORFNLQJDVUHTXLUHG
1DLO
RXWULJJHU
WKURXJK$-6
ZHE
9(56$/$0
/9/VXSSRUWEHDP
%HYHOHGZHEVWLIIHQHU
RQHDFKVLGH
9(56$/$0/9/
VXSSRUWEHDP
LATERAL SUPPORT
AJS Joists must be laterally supported at the ends
with hangers, AJS rim joists, rim boards, AJS
blocking panels or x-bracing. AJS blocking panels or
x-bracing are required at cantilever supports.
-RLVW
+DQJHU
6LPSVRQ/668,RU863708KDQJHU
Backer Block
Thickness
1" or two "
wood panels
1" or two "
wood panels
2 x _ lumber
(QG
:DOO
[BRXWULJJHU
QRWFKHGDURXQG$-6
WRSIODQJH2XWULJJHU
VSDFLQJQRJUHDWHU
WKDQRQFHQWHU
10/15/09
15
NonSnow
125%
12"
o.c.
Snow
115%
NonSnow
125%
16"
o.c.
Snow
115%
NonSnow
125%
19.2"
o.c.
Snow
115%
NonSnow
125%
24"
o.c.
Snow
115%
11"
AJS 140
AJS 20 Series
2" Flange Width
9"
AJS 20
11"
AJS 20
14"
AJS 20
16"
AJS 20
Live Dead 4/12 4/12 8/12 4/12 4/12 8/12 4/12 4/12 8/12 4/12 4/12 8/12 4/12 4/12 8/12 4/12 4/12 8/12
Load Load
or
to
to
or
to
to
or
to
to
or
to
to
or
to
to
or
to
to
[psf] [psf] Less 8/12 12/12 Less 8/12 12/12 Less 8/12 12/12 Less 8/12 12/12 Less 8/12 12/12 Less 8/12 12/12
20
10 25'-2" 23'-9" 22'-0" 30'-1" 28'-5" 26'-4" 27'-4" 25'-9" 23'-11" 32'-7" 30'-9" 28'-7" 37'-1" 35'-0" 32'-6" 41'-2" 38'-10" 36'-0"
20
15 23'-10" 22'-5" 20'-8" 28'-6" 26'-9" 24'-9" 25'-10" 24'-3" 22'-5" 30'-11" 29'-0" 26'-9" 35'-2" 33'-0" 30'-5" 39'-0" 36'-7" 33'-9"
20
20 22'-9" 21'-4" 19'-7" 27'-3" 25'-6" 23'-5" 24'-8" 23'-1" 21'-3" 29'-6" 27'-7" 25'-4" 33'-6" 31'-5" 28'-10" 37'-2" 34'-10" 32'-0"
25
10 23'-11" 22'-7" 21'-0" 28'-5" 27'-0" 25'-2" 25'-11" 24'-6" 22'-10" 31'-0" 29'-3" 27'-3" 35'-3" 33'-4" 31'-0" 39'-1" 36'-11" 34'-4"
25
15 22'-10" 21'-6" 19'-10" 26'-6" 25'-8" 23'-9" 24'-9" 23'-3" 21'-6" 29'-7" 27'-10" 25'-9" 33'-7" 31'-8" 29'-4" 36'-11" 35'-1" 32'-6"
30
10 22'-10" 21'-8" 20'-2" 26'-7" 25'-11" 24'-2" 24'-9" 23'-6" 21'-11" 29'-7" 28'-0" 26'-2" 33'-8" 31'-11" 29'-9" 37'-1" 35'-4" 33'-0"
30
15 21'-11" 20'-8" 19'-2" 25'-0" 24'-5" 22'-11" 23'-9" 22'-5" 20'-10" 28'-5" 26'-9" 24'-10" 32'-4" 30'-6" 28'-3" 34'-10" 33'-10" 31'-4"
40
10 20'-10" 19'-11" 18'-10" 23'-9" 23'-5" 22'-6" 22'-6" 21'-7" 20'-5" 26'-11" 25'-10" 24'-5" 30'-8" 29'-5" 27'-9" 33'-2" 32'-7" 30'-9"
40
15 19'-10" 19'-4" 18'-1" 22'-7" 22'-2" 21'-7" 22'-2" 21'-0" 19'-7" 26'-6" 25'-1" 23'-5" 29'-3" 28'-7" 26'-7" 31'-7" 30'-11" 29'-6"
50
10 19'-0" 18'-6" 17'-6" 21'-8" 21'-5" 21'-0" 20'-10" 20'-0" 19'-0" 24'-11" 23'-11" 22'-9" 28'-1" 27'-3" 25'-10" 30'-3" 29'-11" 28'-8"
50
15 18'-3" 17'-11" 17'-2" 20'-10" 20'-6" 20'-0" 20'-10" 19'-11" 18'-7" 24'-6" 23'-9" 22'-3" 26'-11" 26'-6" 25'-3" 29'-0" 28'-7" 27'-11"
20
10 22'-10" 21'-6" 20'-0" 27'-4" 25'-9" 23'-11" 24'-9" 23'-4" 21'-8" 29'-7" 27'-11" 25'-11" 33'-8" 31'-9" 29'-5" 37'-4" 35'-2" 32'-8"
20
15 21'-7" 20'-3" 18'-9" 25'-6" 24'-3" 22'-5" 23'-5" 22'-0" 20'-4" 28'-0" 26'-4" 24'-3" 31'-10" 29'-11" 27'-7" 35'-4" 33'-2" 30'-7"
20
20 20'-7" 19'-3" 17'-9" 23'-10" 23'-0" 21'-3" 22'-4" 20'-11" 19'-3" 26'-8" 25'-0" 23'-0" 30'-5" 28'-5" 26'-2" 33'-3" 31'-7" 29'-0"
25
10 21'-7" 20'-6" 19'-1" 24'-7" 24'-1" 22'-10" 23'-6" 22'-2" 20'-8" 28'-1" 26'-6" 24'-8" 31'-10" 30'-2" 28'-1" 34'-3" 33'-6" 31'-2"
25
15 20'-1" 19'-5" 18'-0" 22'-11" 22'-4" 21'-6" 22'-5" 21'-1" 19'-6" 26'-9" 25'-2" 23'-4" 29'-8" 28'-8" 26'-7" 32'-0" 31'-1" 29'-5"
30
10 20'-2" 19'-7" 18'-3" 23'-0" 22'-7" 21'-11" 22'-5" 21'-3" 19'-10" 26'-10" 25'-5" 23'-9" 29'-9" 28'-11" 27'-0" 32'-1" 31'-6" 29'-11"
30
15 18'-11" 18'-6" 17'-5" 21'-7" 21'-1" 20'-5" 21'-6" 20'-4" 18'-10" 25'-6" 24'-3" 22'-6" 28'-0" 27'-4" 25'-8" 30'-2" 29'-5" 28'-5"
40
10 18'-0" 17'-9" 17'-1" 20'-7" 20'-3" 19'-10" 20'-5" 19'-7" 18'-6" 24'-3" 23'-5" 22'-1" 26'-8" 26'-3" 25'-2" 28'-8" 28'-3" 27'-9"
40
15 17'-2" 16'-10" 16'-4" 19'-7" 19'-2" 18'-8" 20'-1" 19'-0" 17'-9" 23'-1" 22'-7" 21'-2" 25'-4" 24'-10" 24'-1" 27'-3" 26'-9" 26'-1"
50
10 16'-5" 16'-3" 15'-10" 18'-9" 18'-6" 18'-3" 18'-11" 18'-1" 17'-2" 22'-2" 21'-8" 20'-7" 24'-4" 24'-0" 23'-5" 26'-2" 25'-11" 25'-5"
50
15 15'-9" 15'-6" 15'-2" 18'-0" 17'-8" 17'-3" 18'-7" 18'-0" 16'-10" 21'-3" 20'-10" 20'-1" 23'-4" 22'-11" 22'-5" 25'-1" 24'-8" 23'-7"
20
10 21'-5" 20'-3" 18'-9" 25'-3" 24'-2" 22'-5" 23'-3" 21'-11" 20'-4" 27'-9" 26'-2" 24'-4" 31'-7" 29'-10" 27'-8" 35'-1" 33'-1" 30'-8"
20
15 20'-3" 19'-1" 17'-7" 23'-3" 22'-7" 21'-1" 22'-0" 20'-8" 19'-1" 26'-4" 24'-8" 22'-10" 29'-11" 28'-1" 25'-11" 32'-6" 31'-2" 28'-9"
20
20 19'-1" 18'-1" 16'-8" 21'-9" 21'-0" 19'-11" 21'-0" 19'-8" 18'-1" 25'-1" 23'-6" 21'-7" 28'-1" 26'-9" 24'-7" 30'-4" 29'-3" 27'-3"
25
10 19'-8" 19'-3" 17'-11" 22'-5" 21'-11" 21'-4" 22'-1" 20'-10" 19'-5" 26'-4" 24'-11" 23'-3" 29'-0" 28'-4" 26'-5" 31'-3" 30'-7" 29'-3"
25
15 18'-4" 17'-10" 16'-11" 20'-11" 20'-4" 19'-7" 21'-0" 19'-10" 18'-4" 24'-8" 23'-8" 21'-11" 27'-1" 26'-4" 24'-11" 29'-2" 28'-5" 27'-5"
30
10 18'-5" 18'-1" 17'-2" 21'-0" 20'-7" 20'-1" 21'-1" 19'-11" 18'-8" 24'-9" 23'-10" 22'-3" 27'-2" 26'-8" 25'-4" 29'-3" 28'-9" 28'-0"
30
15 17'-3" 16'-10" 16'-4" 19'-8" 19'-3" 18'-7" 20'-2" 19'-1" 17'-8" 23'-3" 22'-8" 21'-2" 25'-6" 24'-11" 24'-1" 27'-6" 26'-10" 26'-0"
40
10 16'-5" 16'-2" 15'-10" 18'-9" 18'-6" 18'-1" 19'-2" 18'-5" 17'-4" 22'-1" 21'-10" 20'-9" 24'-3" 23'-11" 23'-5" 26'-2" 25'-9" 25'-3"
40
15 15'-8" 15'-4" 14'-11" 17'-10" 17'-6" 17'-0" 18'-5" 17'-10" 16'-8" 21'-0" 20'-7" 19'-11" 23'-1" 22'-8" 22'-0" 24'-11" 24'-2" 22'-11"
50
10 15'-0" 14'-10" 14'-7" 17'-1" 16'-11" 16'-7" 17'-8" 17'-0" 16'-2" 20'-2" 19'-11" 19'-4" 22'-2" 21'-11" 21'-6" 23'-2" 22'-7" 21'-10"
50
15 14'-4" 14'-2" 13'-10" 16'-5" 16'-1" 15'-9" 17'-0" 16'-8" 15'-9" 19'-4" 19'-0" 18'-7" 21'-0" 20'-3" 19'-4" 21'-3" 20'-7" 19'-8"
20
10 19'-9" 18'-9" 17'-5" 22'-6" 22'-0" 20'-10" 21'-6" 20'-4" 18'-10" 25'-9" 24'-3" 22'-6" 29'-2" 27'-7" 25'-8" 31'-5" 30'-8" 28'-5"
20
15 18'-3" 17'-8" 16'-3" 20'-10" 20'-2" 19'-4" 20'-4" 19'-1" 17'-8" 24'-4" 22'-10" 21'-1" 26'-11" 26'-0" 24'-0" 29'-0" 28'-2" 26'-8"
20
20 17'-0" 16'-5" 15'-5" 19'-5" 18'-9" 17'-10" 19'-5" 18'-2" 16'-9" 22'-11" 21'-9" 20'-0" 25'-2" 24'-3" 22'-9" 27'-1" 26'-2" 24'-11"
25
10 17'-7" 17'-2" 16'-7" 20'-0" 19'-7" 19'-1" 20'-5" 19'-4" 18'-0" 23'-7" 23'-1" 21'-6" 25'-11" 25'-5" 24'-6" 27'-11" 27'-4" 26'-7"
25
15 16'-4" 15'-11" 15'-4" 18'-8" 18'-2" 17'-6" 19'-4" 18'-4" 17'-0" 22'-0" 21'-5" 20'-4" 24'-2" 23'-6" 22'-8" 26'-1" 25'-4" 24'-3"
30
10 16'-5" 16'-1" 15'-9" 18'-9" 18'-5" 17'-11" 19'-4" 18'-6" 17'-3" 22'-1" 21'-8" 20'-8" 24'-3" 23'-10" 23'-3" 26'-2" 25'-8" 25'-0"
30
15 15'-5" 15'-1" 14'-7" 17'-7" 17'-2" 16'-8" 18'-2" 17'-8" 16'-5" 20'-9" 20'-3" 19'-7" 22'-10" 22'-3" 21'-7" 24'-6" 23'-4" 21'-11"
40
10 14'-8" 14'-6" 14'-2" 16'-9" 16'-6" 16'-2" 17'-4" 17'-0" 16'-1" 19'-9" 19'-6" 19'-1" 21'-8" 21'-3" 20'-5" 22'-2" 21'-6" 20'-8"
40
15 13'-11" 13'-8" 13'-4" 15'-11" 15'-7" 15'-2" 16'-6" 16'-2" 15'-5" 18'-9" 18'-5" 17'-8" 19'-9" 19'-0" 18'-0" 20'-1" 19'-3" 18'-3"
50
10 13'-5" 13'-3" 13'-0" 15'-3" 15'-1" 14'-10" 15'-10" 15'-7" 14'-11" 17'-11" 17'-6" 16'-11" 18'-2" 17'-9" 17'-2" 18'-6" 18'-0" 17'-5"
50
15 12'-10" 12'-7" 12'-4" 14'-8" 14'-5" 14'-1" 15'-2" 14'-11" 14'-7" 16'-5" 15'-11" 15'-2" 16'-9" 16'-2" 15'-5" 17'-0" 16'-5" 15'-8"
10/15/09
16
3 8
11"
AJS 25
9"
AJS 25
NonSnow
125%
12"
o.c.
Snow
115%
NonSnow
125%
16"
o.c.
Snow
115%
NonSnow
125%
19.2"
o.c.
Snow
115%
NonSnow
125%
24"
o.c.
Snow
115%
Live Dead
Load Load
[psf] [psf]
20
10
20
15
20
20
25
10
25
15
30
10
30
15
40
10
40
15
50
10
50
15
20
10
20
15
20
20
25
10
25
15
30
10
30
15
40
10
40
15
50
10
50
15
20
10
20
15
20
20
25
10
25
15
30
10
30
15
40
10
40
15
50
10
50
15
20
10
20
15
20
20
25
10
25
15
30
10
30
15
40
10
40
15
50
10
50
15
4/12
or
Less
30'-0''
28'-5''
27'-1''
28'-5''
27'-2''
27'-2''
26'-1''
24'-9''
24'-4''
22'-11''
22'-11''
27'-2''
25'-8''
24'-6''
25'-9''
24'-7''
24'-7''
23'-7''
22'-5''
22'-0''
20'-9''
20'-9''
25'-6''
24'-2''
23'-0''
24'-2''
23'-1''
23'-1''
22'-2''
21'-0''
20'-8''
19'-5''
19'-5''
23'-7''
22'-4''
21'-3''
22'-5''
21'-4''
21'-5''
20'-6''
19'-5''
19'-1''
17'-11''
17'-11''
4/12
to
8/12
28'-3''
26'-8''
25'-4''
26'-11''
25'-7''
25'-9''
24'-7''
23'-9''
23'-1''
22'-0''
21'-10''
25'-7''
24'-2''
22'-11''
24'-4''
23'-2''
23'-4''
22'-3''
21'-6''
20'-10''
19'-11''
19'-9''
24'-1''
22'-8''
21'-7''
22'-11''
21'-9''
21'-11''
20'-11''
20'-2''
19'-7''
18'-8''
18'-6''
22'-3''
21'-0''
19'-11''
21'-2''
20'-1''
20'-3''
19'-4''
18'-8''
18'-1''
17'-3''
17'-2''
8/12
to
12/12
26'-3''
24'-7''
23'-4''
25'-0''
23'-8''
24'-0''
22'-10''
22'-5''
21'-6''
20'-10''
20'-5''
23'-9''
22'-3''
21'-1''
22'-8''
21'-5''
21'-9''
20'-8''
20'-4''
19'-5''
18'-11''
18'-6''
22'-4''
20'-11''
19'-10''
21'-4''
20'-2''
20'-5''
19'-5''
19'-1''
18'-3''
17'-9''
17'-4''
20'-8''
19'-5''
18'-4''
19'-9''
18'-8''
18'-11''
18'-0''
17'-8''
16'-11''
16'-5''
16'-0''
4/12
or
Less
35'-9''
33'-10''
32'-4''
33'-11''
32'-5''
32'-5''
31'-1''
29'-6''
29'-1''
27'-4''
27'-4''
32'-5''
30'-8''
29'-3''
30'-9''
29'-4''
29'-5''
28'-2''
26'-9''
26'-4''
24'-9''
24'-9''
30'-5''
28'-10''
27'-6''
28'-11''
27'-6''
27'-7''
26'-5''
25'-1''
24'-8''
23'-3''
23'-3''
28'-2''
26'-8''
25'-5''
26'-9''
25'-6''
25'-7''
24'-6''
23'-3''
21'-11''
20'-2''
18'-7''
4/12
to
8/12
33'-9''
31'-10''
30'-3''
32'-1''
30'-6''
30'-9''
29'-4''
28'-4''
27'-6''
26'-3''
26'-1''
30'-7''
28'-10''
27'-5''
29'-1''
27'-7''
27'-10''
26'-7''
25'-8''
24'-11''
23'-9''
23'-7''
28'-9''
27'-1''
25'-9''
27'-4''
25'-11''
26'-2''
25'-0''
24'-1''
23'-5''
22'-3''
22'-2''
26'-7''
25'-1''
23'-10''
25'-4''
24'-0''
24'-3''
23'-1''
22'-3''
21'-1''
19'-8''
17'-11''
14"
AJS 25
8/12
to
12/12
31'-4''
29'-4''
27'-10''
29'-10''
28'-3''
28'-8''
27'-3''
26'-9''
25'-8''
24'-11''
24'-4''
28'-4''
26'-7''
25'-2''
27'-1''
25'-7''
26'-0''
24'-8''
24'-3''
23'-3''
22'-7''
22'-1''
26'-8''
25'-0''
23'-8''
25'-5''
24'-0''
24'-5''
23'-2''
22'-9''
21'-10''
21'-2''
20'-8''
24'-8''
23'-2''
21'-11''
23'-7''
22'-3''
22'-7''
21'-6''
21'-1''
19'-11''
19'-0''
17'-1''
4/12
or
Less
40'-7''
38'-5''
36'-8''
38'-6''
36'-9''
36'-10''
35'-4''
33'-6''
33'-0''
31'-0''
31'-0''
36'-9''
34'-10''
33'-3''
34'-11''
33'-3''
33'-4''
32'-0''
30'-4''
29'-11''
28'-1''
28'-1''
34'-7''
32'-8''
31'-2''
32'-9''
31'-3''
31'-4''
30'-0''
28'-6''
28'-1''
26'-1''
23'-11''
32'-0''
30'-3''
28'-10''
30'-4''
28'-11''
29'-0''
27'-7''
24'-11''
22'-7''
20'-9''
19'-1''
4/12
to
8/12
38'-3''
36'-1''
34'-4''
36'-5''
34'-7''
34'-11''
33'-4''
32'-2''
31'-3''
29'-9''
29'-7''
34'-8''
32'-8''
31'-1''
33'-0''
31'-4''
31'-7''
30'-2''
29'-1''
28'-3''
27'-0''
26'-9''
32'-7''
30'-9''
29'-3''
31'-0''
29'-5''
29'-8''
28'-4''
27'-4''
26'-7''
25'-4''
23'-2''
30'-2''
28'-5''
27'-1''
28'-9''
27'-3''
27'-6''
26'-3''
24'-3''
21'-8''
20'-3''
18'-6''
16"
AJS 25
8/12
to
12/12
35'-6''
33'-4''
31'-7''
33'-11''
32'-0''
32'-6''
30'-11''
30'-4''
29'-1''
28'-3''
27'-8''
32'-2''
30'-2''
28'-7''
30'-9''
29'-0''
29'-6''
28'-0''
27'-6''
26'-4''
25'-7''
25'-0''
30'-3''
28'-4''
26'-10''
28'-11''
27'-3''
27'-9''
26'-4''
25'-10''
24'-9''
24'-1''
22'-1''
28'-0''
26'-3''
24'-11''
26'-9''
25'-3''
25'-8''
24'-5''
23'-3''
20'-7''
19'-7''
17'-8''
4/12
or
Less
45'-0''
42'-7''
40'-8''
42'-9''
40'-9''
40'-10''
39'-2''
37'-2''
36'-7''
34'-5''
34'-5''
40'-9''
38'-7''
36'-10''
38'-9''
36'-11''
37'-0''
35'-6''
33'-8''
33'-2''
31'-2''
29'-7''
38'-4''
36'-3''
34'-7''
36'-4''
34'-8''
34'-9''
33'-4''
31'-7''
29'-1''
26'-10''
24'-8''
35'-6''
33'-7''
32'-0''
33'-8''
31'-10''
32'-1''
28'-4''
25'-8''
23'-3''
21'-5''
19'-8''
4/12
to
8/12
42'-5''
40'-0''
38'-1''
40'-5''
38'-4''
38'-8''
36'-11''
35'-8''
34'-8''
33'-0''
32'-10''
38'-6''
36'-3''
34'-6''
36'-7''
34'-9''
35'-1''
33'-6''
32'-4''
31'-4''
29'-11''
28'-8''
36'-2''
34'-1''
32'-5''
34'-5''
32'-8''
32'-11''
31'-5''
30'-4''
28'-0''
26'-2''
23'-10''
33'-6''
31'-7''
30'-0''
31'-10''
30'-2''
30'-6''
27'-0''
24'-11''
22'-4''
20'-11''
19'-0''
8/12
to
12/12
39'-4''
36'-11''
35'-0''
37'-7''
35'-6''
36'-1''
34'-4''
33'-8''
32'-3''
31'-4''
30'-8''
35'-8''
33'-6''
31'-9''
34'-1''
32'-2''
32'-9''
31'-1''
30'-6''
29'-3''
28'-5''
27'-4''
33'-7''
31'-6''
29'-10''
32'-0''
30'-3''
30'-9''
29'-2''
28'-8''
26'-6''
25'-3''
22'-9''
31'-1''
29'-2''
27'-7''
29'-8''
28'-0''
28'-6''
25'-4''
23'-11''
21'-2''
20'-2''
18'-2''
10/15/09
17
7 16
18"
AJS 25
NonSnow
125%
12"
o.c.
Snow
115%
NonSnow
125%
16"
o.c.
Snow
115%
NonSnow
125%
19.2"
o.c.
Snow
115%
NonSnow
125%
24"
o.c.
Snow
115%
Live Dead
Load Load
[psf] [psf]
20
10
20
15
20
20
25
10
25
15
30
10
30
15
40
10
40
15
50
10
50
15
20
10
20
15
20
20
25
10
25
15
30
10
30
15
40
10
40
15
50
10
50
15
20
10
20
15
20
20
25
10
25
15
30
10
30
15
40
10
40
15
50
10
50
15
20
10
20
15
20
20
25
10
25
15
30
10
30
15
40
10
40
15
50
10
50
15
4/12
or
Less
48'-0"
47'-8"
45'-5"
47'-9"
45'-7"
45'-8"
43'-10"
41'-7"
40'-11"
38'-6"
38'-6"
45'-7"
43'-2"
41'-2"
43'-4"
41'-4"
41'-5"
39'-8"
37'-8"
36'-7"
34'-11"
33'-8"
42'-10"
40'-7"
38'-9"
40'-8"
38'-10"
38'-11"
36'-10"
35'-1"
33'-4"
32'-0"
30'-8"
39'-8"
37'-7"
35'-10"
37'-5"
34'-11"
35'-0"
32'-11"
31'-4"
29'-10"
28'-7"
27'-5"
4/12
to
8/12
47'-5"
44'-9"
42'-7"
45'-2"
42'-11"
43'-3"
41'-4"
39'-10"
38'-9"
36'-11"
36'-8"
43'-0"
40'-7"
38'-7"
40'-11"
38'-11"
39'-2"
37'-5"
36'-2"
35'-1"
33'-6"
33'-1"
40'-5"
38'-1"
36'-3"
38'-6"
36'-6"
36'-10"
35'-2"
33'-11"
32'-9"
31'-5"
30'-2"
37'-5"
35'-4"
33'-7"
35'-8"
33'-10"
34'-1"
32'-2"
30'-11"
29'-3"
28'-3"
27'-0"
20"
AJS 25
8/12
to
12/12
44'-0"
41'-3"
39'-1"
42'-0"
39'-8"
40'-4"
38'-4"
37'-7"
36'-1"
35'-1"
34'-3"
39'-11"
37'-5"
35'-6"
38'-1"
36'-0"
36'-7"
34'-9"
34'-1"
32'-9"
31'-9"
31'-1"
37'-6"
35'-2"
33'-4"
35'-10"
33'-10"
34'-4"
32'-8"
32'-1"
30'-9"
29'-10"
29'-2"
34'-9"
32'-7"
30'-11"
33'-2"
31'-4"
31'-10"
30'-3"
29'-8"
28'-5"
27'-8"
26'-4"
4/12
or
Less
48'-0"
48'-0"
48'-0"
48'-0"
48'-0"
48'-0"
47'-6"
45'-1"
44'-4"
41'-9"
41'-2"
48'-0"
46'-10"
44'-8"
46'-11"
44'-9"
44'-10"
42'-9"
40'-8"
38'-8"
37'-2"
35'-7"
46'-5"
44'-0"
41'-11"
44'-1"
41'-4"
41'-5"
39'-0"
37'-1"
35'-4"
33'-11"
32'-6"
43'-0"
40'-9"
38'-5"
39'-7"
36'-11"
37'-1"
34'-10"
33'-2"
31'-6"
30'-3"
29'-0"
4/12
to
8/12
48'-0"
48'-0"
46'-1"
48'-0"
46'-6"
46'-10"
44'-9"
43'-2"
42'-0"
40'-0"
39'-9"
46'-7"
43'-11"
41'-10"
44'-4"
42'-2"
42'-6"
40'-7"
39'-2"
37'-11"
36'-3"
35'-0"
43'-10"
41'-4"
39'-3"
41'-8"
39'-7"
39'-11"
38'-1"
36'-7"
34'-7"
33'-6"
31'-11"
40'-7"
38'-3"
36'-5"
38'-8"
35'-11"
36'-5"
34'-0"
32'-8"
30'-11"
29'-11"
28'-7"
24"
AJS 25
22"
AJS 25
8/12
to
12/12
48'-0"
44'-9"
42'-5"
45'-6"
43'-0"
43'-8"
41'-7"
40'-9"
39'-1"
38'-0"
37'-2"
43'-3"
40'-7"
38'-5"
41'-3"
39'-0"
39'-8"
37'-8"
37'-0"
35'-5"
34'-5"
33'-8"
40'-8"
38'-2"
36'-2"
38'-10"
36'-8"
37'-3"
35'-5"
34'-9"
33'-4"
32'-4"
31'-3"
37'-8"
35'-4"
33'-6"
36'-0"
34'-0"
34'-6"
32'-10"
32'-0"
30'-1"
29'-5"
27'-11"
4/12
or
Less
48'-0"
48'-0"
48'-0"
48'-0"
48'-0"
48'-0"
48'-0"
48'-0"
46'-10"
44'-11"
43'-1"
48'-0"
48'-0"
48'-0"
48'-0"
47'-5"
47'-7"
44'-9"
42'-7"
40'-6"
38'-11"
37'-4"
48'-0"
47'-3"
45'-0"
46'-5"
43'-3"
43'-5"
40'-10"
38'-10"
37'-0"
35'-6"
34'-0"
46'-3"
43'-1"
40'-2"
41'-6"
38'-8"
38'-10"
36'-6"
34'-9"
33'-0"
31'-9"
30'-5"
4/12
to
8/12
48'-0"
48'-0"
48'-0"
48'-0"
48'-0"
48'-0"
48'-0"
46'-5"
45'-2"
43'-0"
42'-5"
48'-0"
47'-3"
44'-11"
47'-8"
45'-4"
45'-8"
43'-8"
42'-0"
39'-9"
38'-5"
36'-8"
47'-1"
44'-5"
42'-3"
44'-10"
42'-2"
42'-8"
39'-11"
38'-4"
36'-3"
35'-1"
33'-6"
43'-8"
41'-2"
38'-10"
40'-8"
37'-8"
38'-1"
35'-8"
34'-3"
32'-5"
31'-4"
29'-11"
8/12
to
12/12
48'-0"
48'-0"
45'-7"
48'-0"
46'-3"
47'-0"
44'-8"
43'-10"
42'-0"
40'-10"
39'-11"
46'-6"
43'-7"
41'-4"
44'-5"
41'-11"
42'-7"
40'-6"
39'-9"
38'-1"
37'-0"
35'-10"
43'-8"
41'-0"
38'-10"
41'-9"
39'-5"
40'-1"
38'-1"
37'-4"
35'-3"
34'-6"
32'-8"
40'-6"
38'-0"
36'-0"
38'-8"
36'-4"
37'-1"
34'-6"
33'-7"
31'-6"
30'-10"
29'-3"
4/12
or
Less
48'-0"
48'-0"
48'-0"
48'-0"
48'-0"
48'-0"
48'-0"
48'-0"
48'-0"
46'-11"
44'-11"
48'-0"
48'-0"
48'-0"
48'-0"
48'-0"
48'-0"
46'-8"
44'-5"
42'-3"
40'-7"
38'-11"
48'-0"
48'-0"
46'-11"
48'-0"
45'-2"
45'-3"
42'-7"
40'-6"
38'-7"
37'-0"
35'-6"
48'-0"
44'-11"
41'-11"
43'-3"
40'-4"
40'-6"
38'-1"
36'-3"
34'-6"
33'-1"
31'-9"
4/12
to
8/12
48'-0"
48'-0"
48'-0"
48'-0"
48'-0"
48'-0"
48'-0"
48'-0"
47'-11"
46'-0"
44'-3"
48'-0"
48'-0"
48'-0"
48'-0"
48'-0"
48'-0"
45'-7"
43'-9"
41'-5"
40'-1"
38'-3"
48'-0"
47'-5"
45'-1"
47'-5"
43'-11"
44'-6"
41'-7"
39'-11"
37'-10"
36'-7"
34'-11"
46'-7"
43'-7"
40'-6"
42'-4"
39'-3"
39'-9"
37'-2"
35'-8"
33'-9"
32'-8"
31'-2"
8/12
to
12/12
48'-0"
48'-0"
48'-0"
48'-0"
48'-0"
48'-0"
47'-8"
46'-10"
44'-11"
43'-7"
42'-8"
48'-0"
46'-7"
44'-2"
47'-5"
44'-10"
45'-6"
43'-3"
42'-5"
40'-4"
39'-5"
37'-5"
46'-8"
43'-9"
41'-6"
44'-7"
42'-1"
42'-9"
40'-3"
39'-2"
36'-10"
35'-11"
34'-1"
43'-3"
40'-7"
38'-5"
41'-2"
37'-11"
38'-9"
36'-0"
35'-0"
32'-11"
32'-2"
30'-6"
Allowable spans and loads shall be adjusted and checked for wind
load as required by local building code.
10/15/09
18
16" AJS 20
Deflect.
14" AJS 20
Deflect.
11" AJS 20
Deflect.
Total Load
NonSnow Snow
(115%) (125%) L/240
358 389
307 334
269 292
239 259
215 233
195 212
179 194
165 179
146 158
127 138
111 121
99
107
88
96
79
86
71
77
64
70
59
64
56
54
58
49
9" AJS 20
Deflect.
Total Load
NonSpan Snow Snow
Length (115%) (125%) L/240
6
353 383
7
302 329
8
264 287
9
235 255
10
211 230
11
182 198
12
153 166
13
130 142
14
112 122
15
98
106
16
86
93
85
17
76
83
71
18
68
74
60
19
61
66
51
20
55
58
44
21
50
50
38
22
23
24
25
26
27
28
Deflect.
AJS 20 Series
2" Flange Width
Total Load
Total Load
Total Load
Total Load
NonNonNonNonSnow Snow
Snow Snow
Snow Snow
Snow Snow
(115%) (125% L/240 (115%) (125% L/240 (115%) (125% L/240 (115%) (125% L/240
353 383
358 389
360 392
364 396
302 329
307 334
309 336
312 339
264 287
269 292
270 294
273 297
235 255
239 259
240 261
242 264
211 230
215 233
216 235
218 237
192 209
195 212
196 213
198 216
176 191
179 194
180 196
182 198
162 177
165 179
166 180
168 182
151 164
153 167
154 168
156 169
136 147 128 143 155
144 156
145 158
119 129 106 134 146
135 147
136 148
105 115
89
126 137
127 138
128 139
94
99
76
119 129
120 130
121 132
84
85
65
109 119 108 113 123
115 125
109 118
73
73
56
99
107
93
108 117
63
63
48
89
97
81
103 112
104 113
55
55
42
81
89
71
98
106
99
108
74
81
62
90
98
95
103
68
72
55
82
90
80
91
99
63
64
49
76
83
71
87
95
57
57
44
70
76
63
81
89
51
51
39
65
71
57
75
82
60
66
51
70
76
69
19
9" AJS 25
Span
Length
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
Total Load
NonSnow
Snow
(115%) (125%)
356
387
305
332
267
290
237
258
214
232
194
211
178
193
164
179
152
166
142
155
133
145
125
136
118
129
111
111
95
95
83
83
72
72
64
64
56
56
50
50
Deflect.
L/240
116
99
84
73
63
55
49
43
38
Total Load
NonSnow
Snow
(115%) (125%)
358
389
307
334
269
292
239
259
215
233
195
212
179
194
165
179
153
167
143
155
134
146
126
137
119
129
113
123
107
116
102
111
97
106
93
101
89
94
83
83
74
74
67
67
60
60
54
54
14" AJS 25
Deflect.
L/240
92
81
72
64
57
51
46
41
Total Load
NonSnow
Snow
(115%) (125%)
360
392
309
336
270
294
240
261
216
235
196
213
180
196
166
180
154
168
144
156
135
147
127
138
120
130
113
123
108
117
103
112
98
106
94
102
90
98
86
94
83
90
80
87
77
84
74
78
71
71
64
64
59
59
53
53
16" AJS 25
Deflect.
L/240
82
73
66
60
54
49
45
41
Total Load
NonSnow
Snow
(115%) (125%)
364
396
312
339
273
297
242
264
218
237
198
216
182
198
168
182
156
169
145
158
136
148
128
139
121
132
115
125
109
118
104
113
99
108
95
103
91
99
87
95
84
91
80
88
78
84
75
81
72
79
70
76
68
74
66
72
64
66
Deflect.
L/240
66
60
55
51
20
Span
Length
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
Total Load
NonSnow
Snow
(115%) (125%)
09
770
607
660
531
578
472
513
425
462
386
420
354
385
327
355
303
330
283
308
265
289
250
272
236
256
223
243
212
231
202
220
193
210
185
201
171
186
158
172
146
159
135
147
126
137
117
127
109
119
102
111
96
105
90
98
85
92
80
85
76
78
72
72
66
66
62
62
57
57
20" AJS 25
Deflect.
L/240
124
112
101
92
84
77
70
65
59
55
51
47
44
Total Load
NonSnow
Snow
(115%) (125%)
767
834
658
715
575
625
511
556
460
500
418
455
383
417
354
385
329
357
307
333
287
312
271
294
255
278
242
263
230
250
219
238
209
227
200
217
191
208
177
192
163
177
151
164
141
153
131
142
122
133
115
125
108
117
101
110
95
104
90
98
85
92
80
87
76
83
72
78
69
72
24" AJS 25
22" AJS 25
Deflect.
L/240
106
97
89
82
75
69
64
60
55
Total Load
NonSnow
Snow
(115%) (125%)
785
854
673
732
589
640
523
569
471
512
428
465
392
427
362
394
336
366
314
341
294
320
277
301
261
284
248
269
235
256
224
244
214
232
205
222
196
213
188
205
179
195
166
180
154
168
144
156
134
146
126
137
118
128
111
121
104
114
99
107
93
101
88
96
84
91
79
86
75
82
Deflect.
L/240
86
79
74
68
Total Load
NonSnow
Snow
(115%) (125%)
803
873
688
748
602
654
535
582
481
523
438
476
401
436
370
402
344
374
321
349
301
327
283
308
267
291
253
275
240
261
229
249
219
238
209
227
200
218
192
209
185
201
178
194
168
182
156
170
146
159
137
149
128
139
121
131
114
123
107
117
101
110
96
104
91
99
86
94
82
89
Deflect.
L/240
-
10/15/09
21
AJS
20
AJS
25
3" Bearing
3" Bearing
5" Bearing
Shear
[lbs]
No
WS(1)
WS(2)
No
WS(1)
WS(2)
No
WS(1)
WS(2)
No
WS(1)
WS(2)
2.2
2450
182
5.2
1160
950
1240
1175
1480
2350
2450
2350
2450
11
2.5
3175
310
6.6
1490
955
1335
1215
1595
2390
2800
2390
2800
2.5
3395
232
5.2
1160
950
1240
1175
1480
2350
2450
2350
2450
11
2.8
4400
394
6.6
1490
955
1335
1215
1595
2390
2800
2390
2800
14
3.0
5295
578
7.8
1790
960
1420
1250
1700
2430
3130
2430
3130
16
3.3
6140
786
9.0
2065
970
1500
1285
1800
2465
3435
2465
3435
3.1
5370
307
5.3
1160
950
1240
1175
1480
2600
2850
2600
2850
11
3.4
6960
519
6.7
1490
955
1335
1215
1595
2690
3190
2690
3190
14
3.7
8380
756
7.9
1790
960
1420
1250
1700
2770
3500
2770
3500
16
3.9
9720
1028
9.1
2065
970
1505
1285
1800
2850
3800
2850
3800
18
4.6
10975
1427
12.3
3010
N/A(3)
2240
N/A(3)
2620
N/A(3)
4720
N/A(3)
4720
20
4.9
12270
1813
13.7
3240
N/A
(3)
2490
N/A
(3)
2980
N/A
(3)
5110
N/A
(3)
5110
22
5.1
13455
2249
15.0
3470
N/A(3)
2490
N/A(3)
3150
N/A(3)
5230
N/A(3)
5505
24
5.4
14625
3690
(3)
2490
(3)
3320
(3)
5345
(3)
5900
2737
16.5
N/A
N/A
N/A
N/A
NOTES:
(1) No web stiffeners required.
Moment, shear and reaction values based upon a load duration of 100%
and may be adjusted for other load durations.
Design values listed are applicable for Allowable Stress Design (ASD).
No additional repetitive member increase allowed.
5wl4
384 EI
w
l
EI
K
=
=
=
=
=
wl2
K
deflection [in]
uniform load [lb/in]
clear span [in]
bending stiffness [lb-in2]
shear deformation coefficient [lb]
perhanger.
Nails shall be clinched when possible.
Verify capacity and fastening requirements
of hangers and connectors.
%DFNHU
%ORFN
WR
JDS
6WHHO
EHDP
6WHHOEHDP
%DFNHUEORFN
RSWLRQDO
7RS0RXQW
%DFNHUEORFNVKDOO
EHWLJKWWRERWWRP
RIWRSIODQJHZLWK
WRJDSDWWRS
RIERWWRPIODQJH
)DFH0RXQW
%DFNHUEORFNVKDOO
EHWLJKWWRERWWRP
RIWRSIODQJHZLWK
WRJDSDWWRS
RIERWWRPIODQJH
10/15/09
Boise Rimboard
22
%RLVH5LPERDUG3URGXFW3UROHV
Boise Rimboard Product Profiles
%&5,0
%2$5'26%
9(56$5,0 * 9(56$/$0
*
%&5,0
%2$5'*
9(56$/$0
*
*18 24 inch deep rimboard are special order products, contact local supplier or Boise representative for product availability.
F07
F07A
Perpendicular
6HHFKDUWIRUYHUWLFDOORDGFDSDFLW\
F56
Parallel
6HHFKDUWIRUYHUWLFDOORDGFDSDFLW\
GLDWKURXJKEROWV
$670$*UDGHV$ %
6$(-*UDGHVRU
RUKLJKHUZLWKZDVKHUV
DQGQXWVRUGLDODJ
VFUHZVIXOOSHQHWUDWLRQ
OEFDSDFLW\IRU
WKLFNHUULP
OEFDSDFLW\IRU
ULPSHUIDVWHQHU
([WHULRU
ZRRGVKHDWKLQJ
7UHDWHG/HGJHU
8VHRQO\IDVWHQHUV
WKDWDUHDSSURYHGIRU
XVHZLWKFRUUHVSRQGLQJ
ZRRGWUHDWPHQW
:KHQXVHGIRUVKHDUWUDQVIHUQDLO
WREHDULQJSODWHZLWKWKHVDPH
QDLOLQJFDSDFLW\DVUHTXLUHGE\WKH
KRUL]RQWDOGLDSKUDJPVFKHGXOH
%RLVH&DVFDGH5LPERDUG
:KHQXVHGIRUVKHDUWUDQVIHUQDLO
WREHDULQJSODWHZLWKWKHVDPH
QDLOLQJFDSDFLW\DVUHTXLUHGE\WKH
KRUL]RQWDOGLDSKUDJPVFKHGXOH
'HVLJQRIPRLVWXUHFRQWUROE\RWKHUV
RQO\VWUXFWXUDOFRPSRQHQWVVKRZQDERYH
Product
Point [lb]
18" &
22" &
16"
20"
24"
Depth Depth Depth
& Less & Less & Less
Maximum Floor
Diaphragm
Lateral Capacity
[lb/ft]
4250
4000
3800
3800
0.5
3300
1650
1650
3500
3500
3500
180
0.5
4400
3000
3000
3500
3500
3500
180
0.5
15/16"
VERSA-LAM 1.4 1800 (1)
6000
5450
4450
4450
1"
VERSA-LAM 2.0 3100 (1)
5700
4300
4300
3900
Product
1" BC RIM BOARD
(2)
(2)
8d
Box
3
8d
Common
3
16d
Box
-
525
0.5
3100
2,000,000
285
750
225
(1)
1,400,000
16d
Common
-
1800
Notes
0.5
10/15/09
VERSA-LAM Products
23
Notes
1. Square and rectangular holes are not permitted.
2. Round holes may be drilled or cut with a hole saw
anywhere within the shaded area of the beam.
3. The horizontal distance between adjacent holes must be
at least two times the size of the larger hole.
4. Do not drill more than three access holes in any four foot
long section of beam.
5. The maximum round hole diameter permitted is:
Beam Depth
51/2"
1
/4"
7 /4"
1"
2"
(QG%HDULQJ
6SDQ
'HSWK
'HSWK
'HSWK
6SDQ
,QWHUPHGLDWH%HDULQJ
10/15/09
24
Bearing
at concrete/masonry walls
%HDULQJDW&RQFUHWH0DVRQU\:DOOV
3URYLGH
PRLVWXUHEDUULHU
DWVXSSRUWDQG
ODWHUDOUHVWUDLQW
Bearing
for door or window header
%HDULQJIRUGRRURUZLQGRZKHDGHU
DLU
VSDFH
UHTXLUHG
EHWZHHQ
FRQFUHWH
DQG
ZRRG
B01
B02
6WUDSSHUFRGHLIWRSSODWHLV
QRWFRQWLQXRXVRYHUKHDGHU
Bearing at column
9HULI\KDQJHU
FDSDFLW\ZLWK
KDQJHUOLWHUDWXUH
9(56$/$0
FROXPQ
B03
7ULPPHUV
B04
Bevel cut
1RWH
'ULOOLQJSHUPLWWHG
IRUVWDQGDUG
FRQQHFWRUV
6ORSHGVHDWFXW
1RWWRH[FHHG
LQVLGHIDFH
RIEHDULQJ
%HDPIUDPLQJLQWRZDOO
Bearing framing
into wall
6WUDSSHUFRGHLIWRS
SODWHLVQRWFRQWLQXRXV
+DQJHU
3URYLGHDGHTXDWH
ODWHUDOVXSSRUW
B06
B07
B08
0RLVWXUHEDUULHUEHWZHHQ
FRQFUHWHDQGZRRG
B09
VERSA-LAM beams are intended for interior applications only and should be kept as dry
as possible during construction.
Continuous lateral support of top of beam shall be provided (side or top bearing framing).
470
705
505
1010
2020
560
1120
2245
3 (2)
350
525
375
755
1515
420
840
1685
4 (3)
335
670
1345
370
745
1495
1125
2250
N/A
3" VERSA-LAM
2 (3)
855
1715
N/A
2
(2)
4 (3)
705
940
525
705
755
1010
1515
840
1120
1685
565
755
1135
630
840
1260
505
670
1010
560
745
1120
" bolts and 2" for " bolts. Bolt holes shall be the same
diameter as the bolt.
2. The nail schedules shown apply to both sides of a 3-member
beam.
3. 7" wide beams must be top-loaded or loaded from both sides
(lesser side shall be no less than 25% of opposite side).
Top-Loaded Applications
For top-loaded beams and beams with side loads with less than those shown:
Maximum Uniform Load
From One Side
Plies
Depth
Nailing
(2) 1" plies
Depths 11" & less 2 rows 16d box/sinker nails @ 12" o.c.
400 plf
600 plf
Depth = 24"
800 plf
Depths 11" & less 2 rows 16d box/sinker nails @ 12" o.c.
300 plf
450 plf
Depth = 24"
600 plf
335 plf
Depth = 24"
505 plf
855 plf
1285 plf
18'
Find: A multiple 1" ply VERSA-LAM that is adequate to support the
design loads and the member's proper connection schedule.
1. Calculate the tributary width that beam is supporting:
14' / 2 + 18' / 2 = 16'
2. Use PLF tables on page 25-27 of ASG or BC CALC to size beam.
A Triple VERSA-LAM 2.0 3100 1" x 14" is found to
adequately support the design loads
3. Calculate the maximum plf load from one side
(the right side in this case).
Max. Side Load = (18' / 2) x (40 + 10 psf) = 450 plf
4. Go to the Multiple Member Connection Table, Side-Loaded
Applications, 1" VERSA-LAM, 3 members
5. The proper connection schedule must have a capacity greater than
the max. side load:
Nailed: 3 rows 16d sinkers @ 12" o.c:
525 plf is greater than 450 plf OK
Bolts: " diameter 2 rows @ 12" staggered:
755 plf is greater than 450 plf OK
10/15/09
25
Span
[ft]
10
11
12
13
14
15
16
17
18
19
20
22
24
26
28
30
763
762
1.8/4.4
479
322
1.5/3.7
243
165
1.5/3
182
124
1.5/3
139
95
1.5/3
109
75
1.5/3
86
60
1.5/3
70
49
1.5/3
57
40
1.5/3
11"
Middle Figure
Bottom Figures
14"
7"
1063
1424
2.4/6.1 3.3/8.2
746
979
724
2.3/5.7 3/7.5
551
745
370
724
2.1/5.3 2.9/7.1
413
665
278
544
1.7/4.4 2.8/7
317
585
214
419
1.5/3.7 2.7/6.8
248
488
1795
4.1/10.3
1207
3.7/9.3
909
3.5/8.7
808
3.4/8.5
728
686
3.4/8.4
662
1525
1525
1.8/4.4
957
643
1.5/3.7
487
329
1.5/3
364
247
1.5/3
279
191
1.5/3
217
169
1.5/3.1
198
135
1.5/3
160
110
1.5/3
131
90
1.5/3
108
75
1.5/3
90
64
1.5/3
329
2.4/6.1
390
264
2.1/5.3
316
214
1.8/4.6
259
177
1.6/4
215
147
1.5/3.6
180
124
1.5/3.2
540
3.3/8.3
585
432
3.2/7.9
509
351
2.9/7.4
427
289
2.6/6.6
355
241
2.3/5.9
298
203
2.1/5.2
76
54
1.5/3
65
46
1.5/3
152
105
1.5/3
130
90
1.5/3
96
68
1.5/3
72
52
1.5/3
56
41
1.5/3
252
173
1.9/4.7
215
148
1.7/4.2
160
111
1.5/3.5
122
86
1.5/3
94
67
1.5/3
74
54
1.5/3
59
9"
14"
16"
18"
24"
2126
2849
2.4/6.1 3.3/8.2
1492
1957
1447
2.3/5.7 3/7.5
1102
1489
741
1447
2.1/5.3 2.9/7.1
825
1330
557
1087
1.7/4.4 2.8/7
634
1170
429
837
1.5/3.7 2.7/6.8
496
976
3590
4.1/10.3
2414
3.7/9.3
1817
3.5/8.7
1617
3.4/8.5
1456
1372
3.4/8.4
1324
4387
5/12.6
2886
4.4/11.1
2148
4.1/10.3
1904
4/10.1
1709
3.9/9.9
1550
5232
6/15
3402
5.2/13
2502
4.8/12
2209
4.7/11.7
1977
4.6/11.4
1789
5226
6/15
3913
6/15
3126
6/15
2839
6/15
2601
6/15
2399
150
1.5/3
173
120
1.5/3
139
98
1.5/3
113
80
1.5/3
93
67
1.5/3
77
56
1.5/3
337
1.5/3.1
395
270
1.5/3
320
220
1.5/3
262
181
1.5/3
217
151
1.5/3
181
127
1.5/3
659
2.4/6.1
779
527
2.1/5.3
631
429
1.8/4.6
518
353
1.6/4
430
295
1.5/3.6
360
248
1.5/3.2
1079
3.3/8.3
1171
864
3.2/7.9
1018
703
2.9/7.4
854
579
2.6/6.6
710
483
2.3/5.9
596
407
2.1/5.2
3.9/9.7
1418
1290
3.8/9.6
1307
1049
3.8/9.5
1151
864
3.6/8.9
1018
720
3.3/8.4
894
607
3.1/7.8
4.5/11.2
1633
4.4/11
1502
1493
4.3/10.9
1390
1230
4.3/10.7
1274
1026
4.2/10.5
1134
864
4/9.9
6/15
2226
6/15
2076
6/15
1944
6/15
1826
6/15
1701
5.9/14.8
65
48
1.5/3
54
41
1.5/3
152
108
1.5/3
129
93
1.5/3
95
70
1.5/3
71
54
1.5/3
54
42
1.5/3
304
211
1.5/3
259
181
1.5/3
192
136
1.5/3
145
105
1.5/3
111
82
1.5/3
87
66
1.5/3
68
504
346
1.9/4.7
430
296
1.7/4.2
320
223
1.5/3.5
243
172
1.5/3
188
135
1.5/3
148
108
1.5/3
118
758
516
2.8/7
647
442
2.5/6.3
482
332
2.1/5.2
368
256
1.8/4.4
286
201
1.5/3.7
226
161
1.5/3.2
1016
735
3.7/9.4
915
630
3.6/8.9
692
473
3/7.4
529
365
2.5/6.3
412
287
2.1/5.3
326
230
1.8/4.6
1592
5.8/14.6
1496
1493
5.8/14.5
1304
1122
5.6/13.9
1092
864
5.1/12.8
927
680
4.7/11.8
792
544
4.4/10.9
54
1.5/3
88
1.5/3
180
131
1.5/3
262
187
1.6/4
639
442
3.8/9.5
44
1.5/3
9"
11"
9"
11"
3189
4273
2.4/6.1 3.3/8.2
2237
2936
2171
2.3/5.7 3/7.5
1653
2234
1111
2171
2.1/5.3 2.9/7.1
1238
1995
835
1631
1.7/4.4 2.8/7
950
1755
643
1256
1.5/3.7 2.7/6.8
744
1464
14"
16"
18"
20"
24"
11"
14"
16"
18"
20"
24"
5384
4.1/10.3
3622
3.7/9.3
2726
3.5/8.7
2425
3.4/8.5
2184
2058
3.4/8.4
6580
5/12.6
4328
4.4/11.1
3222
4.1/10.3
2856
4/10.1
2564
3.9/9.9
7848
6/15
5103
5.2/13
3753
4.8/12
3313
4.7/11.7
2965
4.6/11.4
7845
6/15
5876
6/15
4322
5.5/13.8
3800
5.4/13.4
3390
5.2/13
7838
6/15
5870
6/15
4688
6/15
4259
6/15
3901
6/15
5697
3.3/8.2
3914
3/7.5
2978
2894
2.9/7.1
2659
2175
2.8/7
2340
1675
2.7/6.8
7179
4.1/10.3
4829
3.7/9.3
3635
3.5/8.7
3233
3.4/8.5
2912
2745
3.4/8.4
8773
5/12.6
5771
4.4/11.1
4296
4.1/10.3
3807
4/10.1
3418
3.9/9.9
10463
6/15
6803
5.2/13
5003
4.8/12
4417
4.7/11.7
3953
4.6/11.4
10459
6/15
7834
6/15
5763
5.5/13.8
5067
5.4/13.4
4519
5.2/13
10451
6/15
7826
6/15
6251
6/15
5679
6/15
5201
6/15
3598
6/15
3338
6/15
3113
6/15
2917
6/15
2739
6/15
2552
-
1952
1317
2.4/6.1
1558
1055
2.1/5.3
1262
858
1.8/4.6
1036
707
1.6/4
860
589
1.5/3.6
720
496
2647
2159
3.3/8.3
2342
1728
3.2/7.9
2036
1405
2.9/7.4
1708
1158
2.6/6.6
1420
965
2.3/5.9
1191
813
3101
3.9/9.7
2837
2580
3.8/9.6
2614
2098
3.8/9.5
2303
1728
3.6/8.9
2036
1441
3.3/8.4
1788
1214
3577
4078
4.5/11.2 5.1/12.7
3265
3715
4.4/11 5/12.5
3003
3410
2987
4.3/10.9 4.9/12.3
2780
3151
2461
4.3/10.7 4.9/12.2
2547
2929
2052
2814
4.2/10.5 4.8/12
2268
2735
1728
2371
4797
6/15
4451
6/15
4151
6/15
3889
6/15
3652
6/15
3402
-
506
1.5/3.1
593
405
1.5/3
479
329
1.5/3
393
271
1.5/3
325
226
1.5/3
271
191
988
2.4/6.1
1169
791
2.1/5.3
947
643
1.8/4.6
777
530
1.6/4
645
442
1.5/3.6
540
372
1986
1619
3.3/8.3
1756
1296
3.2/7.9
1527
1054
2.9/7.4
1281
868
2.6/6.6
1065
724
2.3/5.9
894
610
2326
3.9/9.7
2128
1935
3.8/9.6
1960
1573
3.8/9.5
1727
1296
3.6/8.9
1527
1081
3.3/8.4
1341
910
2683
3059
4.5/11.2 5.1/12.7
2449
2786
4.4/11 5/12.5
2253
2558
2240
4.3/10.9 4.9/12.3
2085
2364
1846
4.3/10.7 4.9/12.2
1911
2196
1539
2111
4.2/10.5 4.8/12
1701
2051
1296
1778
1.5/3
229
162
1.5/3
194
139
1.5/3
142
104
1.5/3
106
80
1.5/3
80
63
1.5/3
61
51
1.5/3
1.5/3.2
457
316
1.5/3
389
271
1.5/3
288
204
1.5/3
217
157
1.5/3
167
124
1.5/3
130
99
1.5/3
2.1/5.2
757
519
1.9/4.7
646
445
1.7/4.2
480
334
1.5/3.5
365
257
1.5/3
282
202
1.5/3
222
162
1.5/3
3.1/7.8
1137
774
2.8/7
971
664
2.5/6.3
724
499
2.1/5.2
552
384
1.8/4.4
429
302
1.5/3.7
338
242
1.5/3.2
4/9.9
1524
1102
3.7/9.4
1373
945
3.6/8.9
1038
710
3/7.4
793
547
2.5/6.3
618
430
2.1/5.3
489
344
1.8/4.6
4.8/11.9 5.9/14.8
1863
2388
1512
4.6/11.4 5.8/14.6
1678
2243
1296
2240
4.3/10.8 5.8/14.5
1382
1956
974
1683
3.9/9.9 5.6/13.9
1095
1638
750
1296
3.4/8.6 5.1/12.8
855
1390
590
1020
2.9/7.3 4.7/11.8
678
1188
472
816
2.5/6.3 4.4/10.9
1.5/3.2
609
422
1.5/3
519
362
1.5/3
384
272
1.5/3
290
209
1.5/3
223
165
1.5/3
174
132
1.5/3
2.1/5.2
1009
691
1.9/4.7
861
593
1.7/4.2
640
445
1.5/3.5
486
343
1.5/3
376
270
1.5/3
296
216
1.5/3
3.1/7.8
1516
1032
2.8/7
1295
885
2.5/6.3
965
665
2.1/5.2
736
512
1.8/4.4
572
403
1.5/3.7
451
322
1.5/3.2
4/9.9
2032
1470
3.7/9.4
1830
1260
3.6/8.9
1383
947
3/7.4
1057
729
2.5/6.3
824
574
2.1/5.3
652
459
1.8/4.6
4.8/11.9 5.9/14.8
2484
3184
2016
4.6/11.4 5.8/14.6
2237
2991
1728
2987
4.3/10.8 5.8/14.5
1842
2608
1299
2244
3.9/9.9 5.6/13.9
1460
2184
1000
1728
3.4/8.6 5.1/12.8
1139
1853
787
1359
2.9/7.3 4.7/11.8
904
1584
630
1088
2.5/6.3 4.4/10.9
102
80
1.5/3
176
132
1.5/3
271
197
1.5/3
393
280
1.6/4
546
959
384
664
2.2/5.5 3.8/9.5
137
107
1.5/3
235
176
1.5/3
361
262
1.5/3
523
373
1.6/4
728
1279
512
885
2.2/5.5 3.8/9.5
Total Load values are limited by shear, moment or deflection equal to L/240. Total Load values
are the capacity of the beam in addition to its own weight.
Live Load values are limited by deflection equal to L/360. Check the local building code for other
deflection limits that may apply.
Where a Live Load value is not shown, the Total Load value will control.
Table values represent the most restrictive of simple or multiple span applications. Span is
measured center to center of the supports. Analyze multiple span beams with the BC CALC soft
ware if the length of any span is less than half the length of an adjacent span.
Table values assume that lateral support is provided at each support and continuously along the
top edge and applicable compression edges of the beam.
Table values for Minimum Required Bearing Lengths are based on the allowable compression
ALLJOIST Specifier Guide - UNITED STATES
Top Figure
design value perpendicular to grain for the beam and the Total Load value shown. Other design
considerations, such as a weaker support material, may warrant longer bearing lengths. Table
values assume that support is provided across the full width of the beam.
For 2-ply, 3-ply or 4-ply beams; double, triple or quadruple Allowable Total Load and Allowable
Live Load values. Minimum Required Bearing Lengths remain the same for any number of plies.
1 inch members deeper than 14 inches are to be used as multiple-member beams only.
This table was designed to apply to a broad range of applications. It may be possible to exceed
the limitations of this table by analyzing a specific application with the BC CALC software.
10/15/09
26
Span
[ft]
10
11
12
13
14
15
16
17
18
19
20
22
24
26
28
30
Middle Figure
Bottom Figures
7"
9"
11"
14"
7"
9"
11"
878
2/5
598
482
1.8/4.6
326
247
1.5/3.1
244
186
1.5/3
187
143
1.5/3
146
1223
2.8/7
858
2.6/6.6
637
556
2.4/6.1
526
418
2.2/5.6
424
322
2/4.9
332
1639
3.8/9.4
1126
3.5/8.6
857
3.3/8.2
765
3.2/8.1
674
628
3.1/7.8
573
2065
4.7/11.8
1389
4.3/10.6
1046
4/10
931
3.9/9.8
838
3.9/9.7
762
1755
2/5
1197
965
1.8/4.6
651
494
1.5/3.1
487
371
1.5/3
374
286
1.5/3
292
2446
2.8/7
1717
2.6/6.6
1274
1111
2.4/6.1
1052
835
2.2/5.6
848
643
2/4.9
665
3278
3.8/9.4
2252
3.5/8.6
1714
3.3/8.2
1531
3.2/8.1
1347
1256
3.1/7.8
1146
103
205
81
158
1.5/3 1.5/3.8
88
175
69
136
1.5/3 1.5/3.4
65
130
52
102
1.5/3 1.5/3
99
79
1.5/3
76
62
1.5/3
60
49
1.5/3
14"
225
506
988
3.8/9.5 1.5/3 1.7/4.2 2.9/7.2 3.8/9.5
674
233
530
987
1349
648
180
405
791
1296
3.6/9.1 1.5/3 1.5/3.6 2.7/6.7 3.6/9.1
586
188
429
846
1173
527
146
329
643
1054
3.4/8.5 1.5/3 1.5/3.1 2.5/6.1 3.4/8.5
515
153
352
695
1029
434
121
271
530
868
3.2/7.9 1.5/3 1.5/3 2.2/5.4 3.2/7.9
455
127
292
577
910
362
101
226
442
724
3/7.5 1.5/3 1.5/3 1.9/4.8 3/7.5
399
106
244
484
799
305
85
191
372
610
2.8/7 1.5/3 1.5/3 1.7/4.3 2.8/7
339
89
206
410
677
259
72
162
316
519
2.5/6.3 1.5/3 1.5/3 1.5/3.8 2.5/6.3
289
75
176
350
579
222
62
139
271
445
2.3/5.6 1.5/3 1.5/3 1.5/3.4 2.3/5.6
216
54
130
260
431
167
46
104
204
334
1.9/4.7 1.5/3 1.5/3 1.5/3 1.9/4.7
164
98
197
329
129
80
157
257
1.6/3.9
1.5/3 1.5/3 1.6/3.9
128
75
153
256
101
63
124
202
1.5/3.3
1.5/3 1.5/3 1.5/3.3
101
58
120
202
81
51
99
162
1.5/3
1.5/3 1.5/3 1.5/3
81
66
1.5/3
95
80
1.5/3
16"
18"
4130
5047
5232
4.7/11.8 5.8/14.5 6/15
2779
3321
3915
4.3/10.6 5.1/12.7 6/15
2092
2472
2880
4/10 4.7/11.9 5.5/13.8
1861
2192
2543
3.9/9.8 4.6/11.6 5.4/13.4
1676
1968
2276
3.9/9.7 4.5/11.3 5.2/13.1
1524
1785
2060
161
132
1.5/3
4.5/11.2 5.1/12.9
1634
1880
4.4/11 5.1/12.7
1505
1730
4.3/10.9 5/12.5
1327
1601
1296
4.1/10.2 4.9/12.3
1173
1468
1081
3.9/9.6 4.8/12
1045
1307
910
1296
3.6/9.1
936
774
3.4/8.6
843
664
3.3/8.2
649
499
2.8/7
496
384
2.3/5.9
387
302
2/5
306
242
1.7/4.3
24"
9"
11"
5226
6/15
3913
6/15
3126
6/15
2839
6/15
2601
6/15
2399
3669
2.8/7
2575
2.6/6.6
1912
1667
2.4/6.1
1577
1253
2.2/5.6
1272
965
2/4.9
997
4917
3.8/9.4
3379
3.5/8.6
2571
3.3/8.2
2296
3.2/8.1
2021
1884
3.1/7.8
1719
6/15
2226
6/15
2076
6/15
1944
6/15
1829
6/15
1726
-
759
1.7/4.2
796
608
1.5/3.6
644
494
1.5/3.1
528
407
1.5/3
438
339
1.5/3
367
286
1482
2.9/7.2
1480
1187
2.7/6.7
1268
965
2.5/6.1
1042
795
2.2/5.4
866
663
1.9/4.8
726
558
4.5/11.4 6/15
1171
1634
1102
4.3/10.8 6/15
1055
1551
945
4.1/10.2 6/15
869
1407
710
3.7/9.3 6/15
711
1259
547
3.3/8.3 5.9/14.7
555
1069
430
1020
2.8/7.1 5.4/13.5
441
919
344
816
14"
1.5/3
143
121
1.5/3
16"
18"
6195
7570
7848
4.7/11.8 5.8/14.5 6/15
4168
4981
5872
4.3/10.6 5.1/12.7 6/15
3138
3709
4320
4/10 4.7/11.9 5.5/13.8
2792
3288
3814
3.9/9.8 4.6/11.6 5.4/13.4
2514
2952
3414
3.9/9.7 4.5/11.3 5.2/13.1
2287
3.8/9.5
2023
1944
3.6/9.1
1759
1581
3.4/8.5
1544
1303
3.2/7.9
1365
1086
3/7.5
1198
915
Total Load values are limited by shear, moment or deflection equal to L/180. Total Load values are the
capacity of the beam in addition to its own weight.
Live Load values are limited by deflection equal to L/240. Check the local building code for other
deflection limits that may apply.
Where a Live Load value is not shown, the Total Load value will control.
Table values represent the most restrictive of simple or multiple span applications. Span is measured
center to center of the supports. Analyze multiple span beams with the BC CALC software if the
length of any span is less than half the length of an adjacent span.
Table values assume that lateral support is provided at each support and continuously along the top
edge and applicable compression edges of the beam.
ALLJOIST Specifier Guide - UNITED STATES
112
253
494
1.5/3 1.7/4.2 2.9/7.2
116
265
493
90
203
396
1.5/3 1.5/3.6 2.7/6.7
94
215
423
73
165
322
1.5/3 1.5/3.1 2.5/6.1
77
176
347
60
136
265
1.5/3 1.5/3 2.2/5.4
63
146
289
50
113
221
1.5/3 1.5/3 1.9/4.8
53
122
242
42
95
186
1.5/3 1.5/3 1.7/4.3
Top Figure
1.5/3
242
198
1.5/3
20"
24"
11"
7845
6/15
5876
6/15
4695
6/15
4265
6/15
3903
6/15
7838
6/15
5870
6/15
4688
6/15
4259
6/15
3901
6/15
6556
3.8/9.4
4505
3.5/8.6
3429
3.3/8.2
3062
3.2/8.1
2694
2512
3.1/7.8
3598
6/15
3338
6/15
3113
6/15
2917
6/15
2743
6/15
2588
-
2292
1976
2.9/7.2
1973
1582
2.7/6.7
1691
1286
2.5/6.1
1389
1060
2.2/5.4
1154
884
1.9/4.8
968
744
3049
3.8/9.5
2697
2593
3.6/9.1
2346
2108
3.4/8.5
2058
1737
3.2/7.9
1820
1448
3/7.5
1598
1220
4696
3571
4119
4.5/11.2 5.1/12.9 5.9/14.7
3267
3761
4278
4.4/11 5.1/12.7 5.8/14.4
3011
3459
3928
4.3/10.9 5/12.5 5.7/14.2
2653
3202
3630
2593
4.1/10.2 4.9/12.3 5.6/14
2346
2935
3374
2161
3.9/9.6 4.8/12 5.5/13.8
2089
2614
3151
1821
2593
-
1.7/4.3
820
633
1.5/3.8
699
543
1.5/3.4
520
408
1.5/3
395
314
1.5/3
305
247
1.5/3
240
198
2.8/7
1354
1037
2.5/6.3
1157
889
2.3/5.6
862
668
1.9/4.7
658
515
1.6/3.9
511
405
1.5/3.3
404
324
3.6/9.1
1872
1548
3.4/8.6
1686
1327
3.3/8.2
1297
997
2.8/7
992
768
2.3/5.9
773
604
2/5
612
484
2678
3089
3522
4.5/11.2 5.1/12.9 5.9/14.7
2450
2821
3208
4.4/11 5.1/12.7 5.8/14.4
2258
2595
2946
4.3/10.9 5/12.5 5.7/14.2
1990
2402
2723
1944
4.1/10.2 4.9/12.3 5.6/14
1760
2201
2531
1621
3.9/9.6 4.8/12 5.5/13.8
1567
1961
2364
1366
1944
3.6/9.1
1404
1161
3.4/8.6
1265
996
3.3/8.2
973
748
2.8/7
744
576
2.3/5.9
580
453
2/5
459
363
14"
1.5/3
323
263
1.5/3
16"
18"
20"
24"
10459
6/15
7834
6/15
6259
6/15
5687
6/15
5203
6/15
10451
6/15
7826
6/15
6251
6/15
5679
6/15
5201
6/15
4797
6/15
4451
6/15
4151
6/15
3889
6/15
3657
6/15
3451
-
Table values for Minimum Required Bearing Lengths are based on the allowable compression design
value perpendicular to grain for the beam and the Total Load value shown. Other design considerations,
such as a weaker support material, may warrant longer bearing lengths. Table values assume that
support is provided across the full width of the beam.
For 2-ply, 3-ply or 4-ply beams; double, triple or quadruple Allowable Total Load and Allowable Live
Load values. Minimum Required Bearing Lengths remain the same for any number of plies.
1 inch members deeper than 14 inches are to be used as multiple-member beams only.
This table was designed to apply to a broad range of applications. It may be possible to exceed the
limitations of this table by analyzing a specific application with the BC CALC software.
10/15/09
27
Span
[ft]
10
11
12
13
14
15
16
17
18
19
20
22
24
26
28
30
954
2.2/5.5
640
482
2/4.9
326
247
1.5/3.1
244
186
1.5/3
187
143
1.5/3
146
112
9"
11"
14"
Middle Figure
Bottom Figures
Top Figure
7"
9"
11"
14"
16"
18"
24"
5226
6/15
3913
6/15
3126
6/15
2839
6/15
2601
6/15
2399
-
9"
1.5/3 1.7/4.2 3.1/7.8 4.1/10.4 1.5/3 1.7/4.2 3.1/7.8 4.1/10.44.8/12.1 5.6/14 6/15 1.7/4.2
116
265
521
734
233
530
1043 1467 1777 2046 2226
796
90
203
396
648
180
405
791
1296
608
1.5/3 1.5/3.6 2.8/7 4/9.9 1.5/3 1.5/3.6 2.8/7 4/9.9 4.8/12 5.5/13.8 6/15 1.5/3.6
94
215
423
638
188
429
846
1276 1638 1882 2076
644
73
165
322
527
146
329
643
1054 1573
494
1.5/3 1.5/3.1 2.5/6.1 3.7/9.2 1.5/3 1.5/3.1 2.5/6.1 3.7/9.2 4.7/11.85.4/13.6 6/15 1.5/3.1
77
176
347
560
153
352
695
1120 1443 1742 1944
528
60
136
265
434
121
271
530
868
1296
407
1.5/3 1.5/3 2.2/5.4 3.5/8.6 1.5/3 1.5/3 2.2/5.4 3.5/8.6 4.4/11.15.4/13.4 6/15 1.5/3
63
146
289
476
127
292
577
951
1277 1597 1829
438
50
113
221
362
101
226
442
724
1081 1539
339
1.5/3 1.5/3 1.9/4.8 3.1/7.8 1.5/3 1.5/3 1.9/4.8 3.1/7.8 4.2/10.55.2/13.1 6/15 1.5/3
53
122
242
399
106
244
484
799
1137 1422 1726
367
42
95
186
305
85
191
372
610
910
1296
286
1.5/3 1.5/3 1.7/4.3 2.8/7 1.5/3 1.5/3 1.7/4.3 2.8/7 4/9.9 4.9/12.3 6/15 1.5/3
103
205
339
89
206
410
677
1016 1275 1634
310
81
158
259
72
162
316
519
774
1102
243
1.5/3 1.5/3.8 2.5/6.3 1.5/3 1.5/3 1.5/3.8 2.5/6.3 3.7/9.3 4.7/11.7 6/15 1.5/3
88
175
289
75
176
350
579
869
1149 1551
263
69
136
222
62
139
271
445
664
945
208
1.5/3 1.5/3.4 2.3/5.6 1.5/3 1.5/3 1.5/3.4 2.3/5.6 3.4/8.4 4.4/11.1 6/15 1.5/3
65
130
216
54
130
260
431
649
928
1407
194
52
102
167
46
104
204
334
499
710
157
1.5/3 1.5/3 1.9/4.7 1.5/3 1.5/3 1.5/3 1.9/4.7 2.8/7 4/9.9 6/15 1.5/3
99
164
98
197
329
496
711
1288
146
79
129
80
157
257
384
547
121
1.5/3 1.6/3.9
1.5/3 1.5/3 1.6/3.9 2.3/5.9 3.3/8.3 6/15 1.5/3
76
128
75
153
256
387
555
1164
112
62
101
63
124
202
302
430
1020
95
1.5/3 1.5/3.3
1.5/3 1.5/3 1.5/3.3 2/5 2.8/7.1 5.9/14.7 1.5/3
60
101
58
120
202
306
441
1001
87
49
81
51
99
162
242
344
816
76
1.5/3 1.5/3
1.5/3 1.5/3 1.5/3 1.7/4.3 2.4/6.1 5.5/13.7 1.5/3
81
95
161
246
355
861
68
66
1.5/3
80
1.5/3
132
197
280
664
62
1.5/3 1.5/3.7 2.1/5.3 5.1/12.6 1.5/3
Total Load values are limited by shear, moment or deflection equal to L/180. Total Load values are the
capacity of the beam in addition to its own weight.
Live Load values are limited by deflection equal to L/240. Check the local building code for other
deflection limits that may apply.
Where a Live Load value is not shown, the Total Load value will control.
Table values represent the most restrictive of simple or multiple span applications. Span is measured
center to center of the supports. Analyze multiple span beams with the BC CALC software if the
length of any span is less than half the length of an adjacent span.
Table values assume that lateral support is provided at each support and continuously along the top
edge and applicable compression edges of the beam.
ALLJOIST Specifier Guide - UNITED STATES
11"
14"
16"
18"
20"
24"
7845
6/15
5876
6/15
4695
6/15
4265
6/15
3907
6/15
3604
7838
6/15
5870
6/15
4688
6/15
4259
6/15
3901
6/15
3598
6/15
3338
6/15
3113
6/15
2917
6/15
2743
6/15
2588
6/15
1976 3238
3.1/7.8 4.1/10.44.8/12.1 5.6/14 6/15
2085 2934 3554 4091 4459
1582 2593
2.8/7 4/9.9 4.8/12 5.5/13.8 6/15
1691 2552 3275 3763 4159
1286 2108 3146
2.5/6.1 3.7/9.2 4.7/11.85.4/13.6 6/15
1389 2240 2887 3484 3897
1060 1737 2593
2.2/5.4 3.5/8.6 4.4/11.15.4/13.4 6/15
1154 1902 2553 3193 3665
884
1448 2161 3078
1.9/4.8 3.1/7.8 4.2/10.55.2/13.1 6/15
968
1598 2274 2845 3429
744
1220 1821 2593
1.7/4.3 2.8/7 4/9.9 4.9/12.35.9/14.9
1016
778
2.5/6.3
868
667
2.3/5.6
647
501
1.9/4.7
493
386
1.6/3.9
383
304
1.5/3.3
303
243
1.5/3
242
369
533
738
1291
190
198
295
420
576
996
161
1.5/3 1.5/3.7 2.1/5.3 2.9/7.3 5.1/12.6 1.5/3
14"
1354
1037
2.5/6.3
1157
889
2.3/5.6
862
668
1.9/4.7
658
515
1.6/3.9
511
405
1.5/3.3
404
324
1.5/3
16"
18"
24"
20"
10459 10451
6/15 6/15
7834 7826
6/15 6/15
6259 6251
6/15 6/15
5687 5679
6/15 6/15
5209 5201
6/15 6/15
4806 4797
6/15
4451
6/15
4151
6/15
3889
6/15
3657
6/15
3451
6/15
323
492
710
984
1721
263
393
560
768
1327
1.5/3 1.5/3.7 2.1/5.3 2.9/7.3 5.1/12.6
Table values for Minimum Required Bearing Lengths are based on the allowable compression design
value perpendicular to grain for the beam and the Total Load value shown. Other design considerations,
such as a weaker support material, may warrant longer bearing lengths. Table values assume that
support is provided across the full width of the beam.
For 2-ply, 3-ply or 4-ply beams; double, triple or quadruple Allowable Total Load and Allowable Live
Load values. Minimum Required Bearing Lengths remain the same for any number of plies.
1 inch members deeper than 14 inches are to be used as multiple-member beams only.
This table was designed to apply to a broad range of applications. It may be possible to exceed the
limitations of this table by analyzing a specific application with the BC CALC software.
10/15/09
28
Nailing Parallel to
Glue Lines
(Narrow Face)
VERSA-LAM
1.4 1800 Rimboard
15/16"
VERSA-RIM
11/16"
VERSA-LAM
1"
VERSA-LAM
3" & Wider
All Products
O.C.
[inches]
End
[inches]
O.C.
[inches]
End
[inches]
O.C.
[inches]
End
[inches]
O.C.
[inches]
End
[inches]
O.C.
[inches]
End
[inches]
3
4
4
4
6
6
6
1
3
3
3
4
4
4
3
3
3
3
4
4
6
1
2
2
2
3
3
4
2
3
3
3
4
4
6
1
2
2
2
3
3
3
2
2
2
2
2
2
2
1
1
1
2
2
2
2
2
2
2
2
2
2
1
1
1
2
2
2
8d Box
8d Common
10d & 12d Box
16d Box
10d & 12d Common
16d Sinker
16d Common
Offset and stagger nail rows from floor sheathing and wall sole plate.
Nailing Perpendicular to
Glue Lines (Wide Face)
Nailing Notes
1) For 1" thickness and greater, 2 rows
of nails (such as for a metal strap) are
allowed (use " minimum offset between
rows and stagger nails).
Simpson Strong-Tie A35 and LPT4 connectors may be attached to the side VERSA-LAM // VERSA-RIM .
Use nails as specified by Simpson Strong-Tie.
Depth
[in]
Weight
[lb/ft]
1.5
1 /4
998
776
Width
[in]
Grade
Allowable Allowable
Shear
Moment
[lb]
[ft-lb]
Moment
of Inertia
[in4]
Depth
[in]
Weight
[lb/ft]
8.0
5237
6830
63.3
8.4
5486
7457
72.8
11.0
7232
12566
166.7
5.4
2.4
1568
1821
20.8
3.2
2066
3069
47.6
14.1
9227
19908
346.3
6.3
24.3
55.6
115.4
125.0
207.6
244.2
400.2
597.3
850.5
2016.0
48.5
111.1
230.8
250.1
415.3
488.4
800.3
1194.7
1701.0
2333.3
14.5
9476
20937
375.1
11
17.1
11222
28814
622.9
11
18.1
11845
31913
732.6
14
21.3
13965
43552
1200.5
16
24.4
15960
56046
1792.0
18
27.4
17955
70011
2551.5
20
30.4
19950
85428
3500.0
24
36.5
23940
120549
6048.0
16.6
12303
26544
461.7
17.1
12635
27916
500.1
3
5
7
9
9
11
11
14
16
18
24
5
7
9
9
11
11
14
16
18
20
Design Property
1.8
2.8
3.7
4.7
4.8
5.7
6.0
7.1
8.1
9.1
12.2
5.6
7.4
9.4
9.6
11.4
12.1
14.2
16.2
18.3
20.3
1164
1829
2411
3076
3159
3741
3948
4655
5320
5985
7980
3658
4821
6151
6318
7481
7897
9310
10640
11970
13300
Grade
1058
2486
4189
6636
6979
9605
10638
14517
18682
23337
40183
4971
8377
13272
13958
19210
21275
29035
37364
46674
56952
Modulus of
Elasticity
E (x 106 psi)(1)
Bending
Fb (psi)(2)(3)
51/4
VERSA-STUD
1.7 2650
Grade
Width
[in]
11
20.2
14963
38419
830.6
11
21.4
15794
42550
976.8
14
25.2
18620
58069
1600.7
Horizontal
Shear
Fv (psi)(2)(4)
16
28.8
21280
74728
2389.3
18
32.4
23940
93348
3402.0
20
36.0
26600
113904
4666.7
24
43.2
31920
160732
8064.0
Tension
Parallel to
Grain
Ft (psi)(2)(5)
Compression
Parallel to Grain
Fc ll (psi)(2)
Compression
Perpendicular to
Grain
Fc (psi)(1)(6)
Equivalent
Specific Gravity
for Fastener
Design
(SG)
VERSA-LAM Beams
2.0 3100
2.0
3100
285
2150
3000
750
0.5
1.7 2650
1.7
2650
285
1650
3000
750
0.5
VERSA-LAM Columns
29
The same properties that make VERSA-LAM beams great, also make them highly suitable for wood
columns. In VERSA-LAM columns, you'll find none of the deep checks, cracks or twists that can plague
solid wood columns.
3" x 5"
100% 115% 125%
22,070 24,165 25,430
18,425 19,740 20,515
15,140 15,995 16,495
12,480 13,075 13,415
10,405 10,825 11,070
8,770 9,080 9,260
7,480 7,715 7,850
6,445 6,625 6,730
5,600 5,745 5,830
4,915 5,030 5,095
4,340 4,435 4,490
100%
29,450
24,580
20,195
16,650
13,880
11,700
9,975
8,595
7,475
6,555
5,790
34,525
30,275
26,600
23,465
20,805
18,545
16,615
14,960
13,525
12,285
11,205
10,260
9,420
8,680
5" x 7"
115% 125%
36,790
31,985
27,920
24,510
21,650
19,225
17,180
15,425
13,920
12,620
11,495
10,505
9,635
8,870
38,115
32,980
28,685
25,125
22,130
19,620
17,500
15,695
14,150
12,810
11,655
10,645
9,760
8,980
100%
7" x 7"
115% 125%
33,260
30,325
27,720
25,415
23,370
21,550
19,925
18,475
17,165
15,990
14,930
34,825
31,645
28,835
26,375
24,195
22,270
20,550
19,020
17,650
16,420
15,310
35,740
32,395
29,490
26,920
24,665
22,670
20,910
19,330
17,925
16,660
15,525
Notes
E = 1.7 x 10 6 psi
Fb = 2650*(12/d)1/9 psi
Fb = 2400*(12/d)1/9 psi
100%
Ft = 1650 psi
1) Table assumes that the column is braced at column ends only. Effective
column length is equal to actual column length.
2) Allowable loads are based upon one-piece (solid) column members used
in dry service conditions. Contact project's design professional of record
or Boise EWP Engineering for multi-piece column design.
3) Allowable loads are based on an eccentricity value equal to 0.167
multiplied by either the column thickness or width (worst case).
4) Allowable loads are based on axial loaded columns using the design
provisions of the National Design Specification for Wood Construction
(NDS), 2005 edition. For side or other combined bending and axial loads,
see provisions of NDS, 2005 edition.
5) Load values are not shown for short lengths due to loads exceeding
common connector capacities. Load values are not shown for longer
lengths if the controlling slenderness ratio exceeds 50 (per NDS).
6) Lateral loads (wind loading) are not considered in this table.
Bending
Fb [psi]
Compression
Parallel to Grain
Fc [psi]
Modulus of
Elasticity
E [psi]
Horizontal
Shear
Fv [psi]
2650
3000
1,700,000
285
875
1150
1,400,000
135
Hem-Fir # 2 Grade
850
1300
1,300,000
150
675
900
1,000,000
135
Notes:
Design values are for loads applied to the narrow face of the studs.
Dimension lumber values taken from 2005 Edition, NDS Design Values
for Wood Construction (per 2006 IBC/IRC).
10/15/09
Computer Software
30
BC FRAMER
CADD Framing Software
BC FRAMER is an easy-to-use, stand-alone
computer-aided drafting program with 3D capability
designed to quickly create floor and roof framing
layouts.
Draw walls, add framing areas, locate beams and
rough openings, define cross-sections and on-center
spacing. In minutes, BC FRAMER frames your
layout, builds a piece and price report, creates
a framing drawing with schedule, all using Boise
Engineered Wood Products.
Easy-to-use editing and drawing tools allow flexibility
when modifying members and adding details, symbols
and accessories.
Training classes for BC FRAMER are provided at
Boise EWP's training centers located in Oregon,
Use the New Design toolbar
to create a new design
Louisiana and Georgia.
RECOMMENDED HARDWARE
Current Pentium Processor
Use the Loads toolbar to add loads
1GB RAM (min.)
Use the Holes toolbar to add holes in joists
Microsoft Intellimouse
Windows 7, Vista or XP Professional
Give UsData Entry Tabs
Enter design
Improvements in capacity or speed
criteria and select
a Try! products here
of these components will yield better
performance.
Double-Click on Cautions to
analyze design and display
Report
Filter to shorten
product selection
list
double-click on a
Open View
product toto designers, architects and
BC CALC is available
menu and
analyze design
select Adjust
engineers on CD-ROM or by download at
Design View
Layout to
www.BC.com/ewp. Hardware requirements include
display Data
Tab
Member Diagram:
Same as BC CALC 2001a
Double-Click on Analysis to
analyze design
Double-Click on Cautions to
analyze design and display
Report
Double-Click on any item to
display and change design
parameters
Analysis Results
double-click on a
Create sub-folders to
product to organize your designs
analyze design
Double-click on design name
or icon to go to a design
Filter to shorten
product selection
list
Open View
menu and
select Adjust
Design View
Layout to
display Data
Entry Tab
relocate box
- Drag column
border to resize;
- Drag column
heading to move;
- Right-Click to
add/drop columns
Analysis Results
Right-Click in the Designs column to
create new folders and designs
Columns show
analysis results,
double-click to
go to design
10/15/09
BC COLUMN Software
Boise EWP is proud to introduce BC COLUMN. BC COLUMN is new software that will
allow customers the ability to design columns using Boise Engineered Wood Products.
31
BC COLUMN
10/15/09
32
[GQDLOGULYHLQ
#GHJDQJOH
ITS
Joist
Depth
9"
Capacity
AJS
Hanger
[lbs]
20/140 ITS2.56/9.5
1006
MIT
Nailing
Header
Joist
6-10d
1006
6-10d
20/140 ITS2.56/11.88
1020
6-10d
25
ITS3.56/11.88
1020
6-10d
20/140
ITS2.56/14
1032
6-10d
25
ITS3.56/14
1032
6-10d
20/140
ITS2.56/16
1048
6-10d
25
ITS3.56/16
1048
6-10d
18"
25
MIT418
2305
8-16d
2-10dx1"
20"
25
MIT420
2305
8-16d
22"
25
MIT422
2550
24"
25
MIT424
2550
25
11"
14"
16"
ITS3.56/9.5
Joist
Depth
9"
AJS
20/140 IUS2.56/9.5
10-10d
20/140 IUS2.56/11.88
1020
10-10d
25
IUS3.56/11.88
1020
12-10d
20/140
IUS2.56/14
1032
12-10d
25
IUS3.56/14
1032
12-10d
20/140
IUS2.56/16
1048
14-10d
25
IUS3.56/16
1048
14-10d
18"
25
MIU3.56/18
2430
26-16d
2-10dx1"
2-10dx1"
20"
25
MIU3.56/20
2735
28-16d
2-10dx1"
10-16d
2-10dx1"
22"
25
MIU3.56/20
2820
28-16d
2-10dx1"
10-16d
2-10dx1"
24"
25
MIU3.56/20
2905
28-16d
2-10dx1"
11"
14"
16"
IUS3.56/9.5
U / HU
Capacity
Hanger
[lbs]
MIU5.12/9
2125
MIU
Nailing
Header
Joist
12-16d
2-10dx1"
25
HU410-2
2410
18-16d
8-16d
20/140
MIU5.12/11
2170
16-16d
2-10dx1"
25
HU412-2
2930
22-16d
8-16d
20/140
MIU5.12/14
2210
20-16d
2-10dx1"
25
HU414-2
3120
26-16d
8-16d
20/140
MIU5.12/16
2255
24-16d
2-10dx1"
25
HU414-2
3305
26-16d
12-16d
18"
25
HU414-2
3485
26-16d
12-16d
6-16d
20"
25
HU414-2
3485
26-16d
12-16d
14-16d
6-16d
22"
25
HU414-2
3485
26-16d
12-16d
14-16d
6-16d
24"
25
MIT
Capacity
Hanger
[lbs]
MIT39.5-2
2125
Nailing
Header
Joist
8-16d
2-10dx1"
B7.12/9.5
2720
14-16d
6-16d
20/140 MIT311.88-2
2170
8-16d
2-10dx1"
25
B7.12/11.88
2930
14-16d
6-16d
20/140
MIT314-2
2210
8-16d
2-10dx1"
25
B7.12/14
3120
14-16d
6-16d
20/140
MIT5.12/16
2255
8-16d
2-10dx1"
25
B7.12/16
3305
14-16d
6-16d
18"
25
B7.12/18
3800
14-16d
6-16d
20"
25
B7.12/20
3800
14-16d
22"
25
B7.12/22
3800
24"
25
B7.12/24
3800
9"
AJS
20/140
25
11"
14"
16"
Nailing
Header
Joist
8-10d
1006
25
Joist
Depth
Hanger
IUS
Capacity
[lbs]
935
Joist
Depth
9"
11"
14"
16"
AJS
20/140
10/15/09
Joist
Depth AJS
20/140
9"
25
11"
14"
16"
SUR/L
Capacity
Nailing
Hanger
[lbs]
Header
Joist
SUR/L2.56/9
1139
14-16d 2-10dx1"
SUR/L410
20/140 SUR/L2.56/11
25
SUR/L410
20/140 SUR/L2.56/14
25
SUR/L414
20/140 SUR/L2.56/14
33
1076
14-16d
6-16d
1174
16-16d
2-10dx1"
1101
14-16d
6-16d
1204
18-16d
2-10dx1"
1123
18-16d
8-16d
1235
18-16d
2-10dx1"
Joist
Depth
9"
11"
14"
16"
LSSU
Nailing
Capacity
[lbs]
Header
Joist
1480
14-16d 12-10dx1"
AJS
Hanger
20/140
LSSUH310
25
LSSU410
1480
14-16d 12-10dx1"
20/140
LSSUH310
1595
14-16d 12-10dx1"
25
LSSU410
1595
14-16d 12-10dx1"
20/140
LSSUH310
1600
14-16d 12-10dx1"
25
LSSU410
1625
14-16d 12-10dx1"
20/140
25
25
SUR/L414
1127
18-16d
8-16d
18"
25
SUR/L414
2395
18-16d
8-16d
18"
25
20"
25
SUR/L414
2395
18-16d
8-16d
20"
25
22"
25
22"
25
24"
25
24"
25
6,03621
6WURQJ7LH
Joist
Depth
THAI
Capacity
Nailing
[lbs]
Header
Joist
1330
6-10d 2-10dx1"
20/140
VPA3
25
VPA4
1006
11-10d
2-10dx1"
20/140
VPA3
1020
9-10d
2-10dx1"
25
VPA4
1020
11-10d
2-10dx1"
20/140
VPA3
1032
9-10d
2-10dx1"
25
VPA4
1032
11-10d
2-10dx1"
20/140
VPA3
1048
9-10d
2-10dx1"
25
VPA4
1048
11-10d
2-10dx1"
18"
25
VPA4
1230
11-10d
2-10dx1"
20"
25
VPA4
1230
11-10d
2-10dx1"
22"
25
VPA4
1230
11-10d
2-10dx1"
24"
25
VPA4
1230
11-10d
2-10dx1"
20/140
THAI322
25
THAI422
1330
6-10d
2-10dx1"
20/140
THAI322
1432
6-10d
2-10dx1"
25
THAI422
1432
6-10d
2-10dx1"
20/140
THAI322
1525
6-10d
2-10dx1"
25
THAI422
1525
6-10d
2-10dx1"
20/140
25
18"
25
20"
25
22"
25
24"
25
14"
16"
General Notes
9"
11"
14"
16"
Fastener
Capacity
Rafter
[lbs] Top Plate
1006
9-10d 2-10dx1"
Hanger
Hanger
11"
AJS
AJS
9"
VPA
Joist
Depth
- For proper installation of the ITT or VPA, the 2-10dx1" joist nails through the
bend tabs must be installed at approximately a 45-degree angle. An alternate
fastening method is the installation of a #8x1.25" screw into the joist through the
bottom of the hanger.
Support Requirements
- Support material assumed to be Boise structural composite lumber or sawn
lumber (Douglas fir or southern pine species).
- Minimum support width for single- and double-joist top mount hangers is 3":
(1"for ITT hangers).
- Minimum support width for face mount hangers with 10d and 16d nails is 1" and
2", respectively.
10/15/09
34
Joist
Depth
9"
AJS
20/140
THO
TFL
Capacity THO Nailing
THO
Hanger
Header
Joist
[lbs]
TFL2595
1006
6-10d
2-10dx1"
Joist
Depth
9"
20/140
THF25925
THF
Capacity
[lbs]
1062
25
THF35925
1062
12-10d
2-10dx1"
20/140
THF25112
1085
14-10d
2-10dx1"
25
THF35112
1085
16-10d
2-10dx1"
20/140
THF25140
1105
18-10d
2-10dx1"
25
THF35140
1105
20-10d
2-10dx1"
20/140
THF25160
1127
22-10d
2-10dx1"
25
THF35157
1127
22-10d
2-10dx1"
AJS
Hanger
Nailing
Header
Joist
12-10d
2-10dx1"
25
THO35950
1048
10-10d
2-10dx1"
20/140
TFL25118
1020
6-10d
2-10dx1"
25
THO35118
1068
10-10d
2-10dx1"
20/140
TFL2514
1032
6-10d
2-10dx1"
25
THO35140
1086
12-10d
2-10dx1"
20/140
TFL2516
1048
6-10d
2-10dx1"
25
THO35160
1107
12-10d
2-10dx1"
18"
25
THO35180
2406
14-10d
2-10dx1"
18"
25
THF35165
2430
24-10d
8-10dx1"
20"
25
THO35200
2685
14-10d
2-10dx1"
20"
25
THF35165
2735
24-10d
8-10dx1"
22"
25
TFI422
2820
10-16d
2-10dx1"
22"
25
THF35165
2785
24-10d
8-10dx1"
24"
25
TFI424
2905
10-16d
2-10dx1"
24"
25
THF35165
2785
24-10d
8-10dx1"
11"
14"
16"
11"
14"
16"
Joist
Depth
9"
THO Double
Capacity
[lbs]
2237
20/140 THO25950-2
AJS
25
11"
14"
16"
Hanger
BPH7195
20/140 THO25118-2
25
BPH71118
20/140 THO25140-2
25
BPH7114
20/140 THO25160-2
BPH
Nailing
Header
Joist
10-16d
6-10d
2690
10-16d
6-10d
2300
10-16d
6-10d
3060
10-16d
6-10d
2355
12-16d
6-10d
3260
10-16d
6-10d
2412
12-16d
6-10d
9"
AJS
20/140 THF25925-2
25
11"
14"
16"
THF Double
Capacity
Hanger
[lbs]
HD7100
20/140 THF25112-2
25
HD7120
20/140 THF25140-2
25
HD7140
20/140 THF25160-2
1390
HD
Nailing
Header
Joist
12-10d
6-10d
1680
12-16d
6-10d
1855
16-10d
6-10d
2240
16-16d
6-10d
2210
20-10d
6-10d
2800
20-16d
8-10d
2255
24-10d
6-10d
25
HD7160
3305
24-16d
8-10d
18"
25
HD7180
3920
28-16d
8-10d
6-10d
20"
25
HD7180
3920
28-16d
8-10d
10-16d
6-10d
22"
25
HD7180
3920
28-16d
8-10d
10-16d
6-10d
24"
25
HD7180
3920
28-16d
8-10d
25
BPH7116
3452
10-16d
6-10d
18"
25
BPH7118
3510
10-16d
6-10d
20"
25
BPH7120
3510
10-16d
22"
25
BPH7122
3510
24"
25
BPH7124
3510
Joist
Depth
10/15/09
SKH
Joist AJS
Capacity
Nailing
Hanger
Depth
[lbs]
Header
Joist
20/140 SKH2520L/R
992
14-10d 10-10dx1"
9"
25
SKH410L/R
1062
16-16d
10-16d
11"
14"
20/140 SKH2520L/R
25
SKH410L/R
20/140 SKH2524L/R
1003
14-10d 10-10dx1"
1085
16-16d
1014
16-10d 10-10dx1"
10-16d
Joist
Depth
9"
11"
14"
LSSH
Nailing
Capacity
[lbs]
Header
Joist
1420
14-16d 12-10dx1"
AJS
Hanger
20/140
LSSH25
25
LSSH35
1420
14-16d 12-10dx1"
20/140
LSSH25
1530
14-16d 12-10dx1"
25
LSSH35
1530
14-16d 12-10dx1"
20/140
LSSH25
1630
14-16d 12-10dx1"
25
LSSH35
1630
14-16d 12-10dx1"
20/140
LSSH35
1725
14-16d 12-10dx1"
25
LSSH35
1725
14-16d 12-10dx1"
25
SKH414L/R
1105
22-16d
20/140
SKH2524L/R
1029
16-10d 10-10dx1"
25
SKH414L/R
1127
22-16d
10-16d
18"
25
SKH418L/R
2430
28-16d
10-16d
18"
25
LSSH35
1920
14-16d 12-10dx1"
20"
25
SKH418L/R
2735
28-16d
10-16d
20"
25
LSSH35
1920
14-16d 12-10dx1"
22"
25
SKH418L/R
2820
28-16d
10-16d
22"
25
LSSH35
1920
14-16d 12-10dx1"
24"
25
SKH418L/R
2905
28-16d
10-16d
24"
25
LSSH35
1920
14-16d 12-10dx1"
16"
10-16d
35
16"
Joist
Depth
MSH
Capacity
Nailing
[lbs]
Header
Joist
20/140
TMP25
25
TMP4
1175
6-10d
4-10dx1"
20/140
TMP25
1215
6-10d
4-10dx1"
25
TMP4
1215
6-10d
4-10dx1"
20/140
TMP25
1250
6-10d
4-10dx1"
25
TMP4
1250
6-10d
4-10dx1"
20/140
TMP25
1285
6-10d
4-10dx1"
25
TMP4
1285
6-10d
4-10dx1"
18"
25
TMP4
1970
6-10d
4-10dx1"
20"
25
TMP4
1970
6-10d
4-10dx1"
22"
25
TMP4
1970
6-10d
4-10dx1"
24"
25
TMP4
1970
6-10d
4-10dx1"
20/140
25
MSH422
1270
22-10d
4-10d
20/140
MSH318
1367
16-10d
4-10dx1"
25
MSH422
1367
22-10d
4-10d
20/140
MSH318
1455
16-10d
4-10dx1"
25
20/140
MSH318
1413
16-10d
4-10dx1"
25
18"
25
20"
25
22"
25
24"
25
14"
16"
9"
11"
14"
16"
General Notes
- Bold Italic hangers required web stiffeners.
- Capacities will vary with different nailing criteria and/or support conditions:
contact supplier or USP Structural Connectors for further information.
- Capacity values shown are either hanger capacity values (see support
requirements below) or AJS Joist end reaction capacities whichever is
less.
- All capacity values are downward loads at 100% load duration.
- Use sloped seat hangers and beveled web stiffeners when AJS Joist
slope exceeds " per foot.
TM
Fastener
Capacity
Rafter
[lbs] Top Plate
1175
6-10d 4-10dx1"
Hanger
Hanger
11"
AJS
AJS
9"
Joist
Depth
- Leave 1/16" clearance (" maximum) between the end of the supported
joist and the head of the hanger.
- For AJS Joist applications, consult USP for capacity reduction.
Support Requirements
- Support material assumed to be Boise structural composite
lumber or sawn lumber (Douglas fir or southern pine species).
- Minimum support width for single- and double-joist top mount
hangers is 3": (1" for THO hangers).
- Minimum support width for face mount hangers with 10d and 16d
nails is 1" and 2", respectively.
10/15/09
Lifetime Guaranteed
Quality and Performance
Boise Cascade warrants its BCI Joist,
VERSA-LAM, and ALLJOIST products
to comply with our specifications, to be
free from defects in material and workmanship,
and to meet or exceed our performance
specifications for the normal and expected life of
the structure when correctly stored, installed and
used according to our Installation Guide.
1-800-232-0788
BCI, BCCALC, BC COLUMN, BCFRAMER , BCRIMBOARD, BOISE GLULAM, SIMPLE FRAMING SYSTEM, VERSA-LAM, VERSA-RIM, and VERSA-STUD are
trademarks of Boise Cascade, L.L.C. or its affiliates.