Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
59.1:021
August 2002
ASME
Specification
SA-216
Carbon Steel
SA-352
Alloy Steels
SA-217
Grade
WCB
WCC
LCB
LCC
WC6
WC9
CF8M
CF8
Stainless Steel
SA-351
CF8C
CF3M
D101463X012
CG8M
www.Fisher.com
Product Bulletin
59.1:021
August 2002
Standard Pressure-Temperature Ratings for ANSI Class 150 and 300 Valves
Fisher valve materials that conform to ASME B16.34-1996 Standard Class pressure-temperature ratings are listed
in tables 2 and 3. These ratings apply to all Fisher cast, forged, and fabricated steel valves.
Table 2. For ANSI Standard Class 150 Valves (1)
WORKING PRESSURE (PSIG)
SERVICE
TEMPERATURE (_F) LCB
LCC
20 to 100
200
300
400
500
265
250
230
200
170
290
260
230
200
170
285
260
230
200
170
290
260
230
200
170
290
260
230
200
170
290
260
230
200
170
275
230
205
190
170
275
235
215
195
170
275
235
215
195
170
230
195
175
160
145
275
235
215
195
170
275
255
230
200
170
600
650
700
750
800
140
125
-------
140
125
-------
140
125
110
95
80
140
125
110
95
80
140
125
110
95
80
140
125
110
95
80
140
125
110
95
80
140
125
110
95
80
140
125
110
95
80
140
125
110
95
80
140
125
110
95
80
140
125
110
95
80
850
900
950
1000
1050
-----------
-----------
-----------
-----------
65
50
35
20
---
65
50
35
20
20
65
50
35
20
20
65
50
35
20
20
65
---------
65
---------
65
50
35
20
---
65
50
35
20
20
1100
1150
1200
1250
1300
-----------
-----------
-----------
-----------
-----------
-----------
20
20
20
20
20
20
20
20
20
20
-----------
-----------
-----------
20
20
20
20
20
1350
1400
1450
1500
---------
---------
---------
---------
---------
---------
20
20
15
10
20
20
20
20
---------
---------
---------
20
20
15
15
1. Table information is extracted from the ValveFlanged, Threaded, and Welding End, ASME Standard B16.34-1996. These tables must be used in accordance with the ASME
standard. The ASME standard states in paragraph 1.2.2: 1.2.2 Code and Regulations. A valve used under the jurisdiction of the ASME Boiler and Pressure Vessel Code, ASME Code
for Pressure Piping, or governmental regulations is subject to any limitation of that code or regulation. This includes any maximum temperature limitation for a material or rule governing
the use of a material at a low temperature. Information copied with permission of the publisher; The American Society of Mechanical Engineers, 345 East 47th Street, New York, New
York, 10017.
2. Flanged end ratings terminate at 1000_F.
3. At temperatures over 1000_F, use material only when carbon content is 0.04% or higher.
SERVICE
TEMPERATURE (_F) LCB
20 to 100
200
300
400
500
695
655
640
620
585
750
750
730
705
665
740
675
655
635
600
750
750
730
705
665
750
750
720
695
665
600
650
700
750
800
535
525
-------
605
590
-------
550
535
535
505
410
605
590
570
505
410
850
900
950
1000
1050
-----------
-----------
-----------
1100
1150
1200
1250
1300
-----------
-----------
1350
1400
1450
1500
---------
---------
CF3M
316L
CG8M or 317
750
750
730
705
665
720
600
530
470
435
720
620
560
515
480
720
620
560
515
480
600
505
455
415
380
720
620
560
515
480
720
660
615
575
540
605
590
570
530
510
605
590
570
530
510
415
410
405
400
395
450
445
430
425
420
450
445
430
425
420
360
350
345
335
330
450
445
430
425
420
515
505
495
490
485
-----------
485
450
320
215
---
485
450
375
260
175
390
385
375
325
310
420
415
385
350
345
420
---------
320
---------
420
415
385
350
---
485
450
385
365
360
-----------
-----------
-----------
-----------
260
195
155
110
85
305
235
185
145
115
-----------
-----------
-----------
325
275
170
125
95
---------
---------
---------
---------
60
50
35
25
95
75
60
40
---------
---------
---------
70
55
40
35
1. Table information is extracted from the ValveFlanged, Threaded, and Welding End, ASME Standard B16.34-1996. These tables must be used in accordance with the ASME
standard. The ASME standard states in paragraph 1.2.2: 1.2.2 Code and Regulations. A valve used under the jurisdiction of the ASME Boiler and Pressure Vessel Code, ASME Code
for Pressure Piping, or governmental regulations is subject to any limitation of that code or regulation. This includes any maximum temperature limitation for a material or rule governing
the use of a material at a low temperature. Information copied with permission of the publisher; The American Society of Mechanical Engineers, 345 East 47th Street, New York, New
York, 10017.
2. At temperatures over 1000_F, use material only when carbon content is 0.04% or higher.
Product Bulletin
59.1:021
August 2002
CF3M
316L
CG8M or 317
20 to 100
200
300
400
500
265
265
265
265
265
290
290
290
290
290
290
290
290
290
290
290
290
290
290
290
290
290
290
290
290
290
290
285
280
275
290
255
230
210
200
290
265
240
220
205
290
265
240
220
205
255
215
195
175
165
290
265
240
220
205
290
275
250
235
230
600
650
700
750
800
265
260
-------
290
290
-------
275
270
265
240
200
290
290
275
240
195
290
290
280
280
275
275
275
275
265
260
185
185
180
175
175
195
190
185
180
180
195
190
185
180
180
155
150
145
145
140
195
190
185
180
180
220
215
210
210
210
850
900
950
1000
1050
-----------
-----------
-----------
-----------
260
225
155
105
---
245
230
180
125
85
170
165
165
155
150
180
175
175
160
160
180
---------
140
---------
180
175
175
160
---
205
205
180
160
160
1100
1150
1200
1250
1300
-----------
-----------
-----------
-----------
-----------
-----------
125
95
75
55
40
145
115
90
70
55
-----------
-----------
-----------
155
130
80
60
45
1350
1400
1450
1500
---------
---------
---------
---------
---------
---------
30
25
15
15
45
35
30
20
---------
---------
---------
35
25
20
15
1. Table information is extracted from the ValveFlanged, Threaded, and Welding End, ASME Standard B16.34-1996. These tables must be used in accordance with the ASME
standard. The ASME standard states in paragraph 2.1.2: 2.1.2 Special Class Valves. Threaded or welding end valves which conform to all the requirements of para. 2.1.1 and in
addition have successfully passed the examinations required by Section 8, may be designated Special Class valves. Ratings shall not exceed the values shown in those Tables 2
having an identifying suffix B. Special Class ratings shall not be used for flanged end valves. Information copied with permission of the publisher; The American Society of Mechanical
Engineers, 345 East 47th Street, New York, New York, 10017.
2. At temperatures over 1000_F, use material only when carbon content is 0.04% or higher.
SERVICE
TEMPERATURE (_F) LCB
LCC
WCB
WCC
WC6
WC9
20 to 100
200
300
400
500
695
695
695
695
695
750
750
750
750
750
750
750
750
750
750
750
750
750
750
750
750
750
750
750
750
750
750
740
725
720
750
670
600
555
520
750
690
625
570
530
750
690
625
570
530
670
565
505
460
425
750
690
625
570
530
750
715
655
615
595
600
650
700
750
800
695
680
-------
750
750
-------
715
700
695
630
515
750
750
710
630
515
750
750
735
730
720
720
715
710
690
675
490
480
470
465
450
505
495
485
475
470
505
495
485
475
470
400
390
380
375
365
505
495
485
475
470
575
565
550
550
545
850
900
950
1000
1050
-----------
-----------
-----------
-----------
680
585
400
270
---
645
600
470
325
220
440
435
425
405
385
465
465
460
420
420
465
---------
360
---------
465
465
460
420
---
540
540
470
420
420
1100
1150
1200
1250
1300
-----------
-----------
-----------
-----------
-----------
-----------
320
250
195
140
105
380
295
230
185
145
-----------
-----------
-----------
405
345
215
155
115
1350
1400
1450
1500
---------
---------
---------
---------
---------
---------
75
60
45
35
120
95
75
50
---------
---------
---------
85
70
50
45
316L
1. Table information is extracted from the ValveFlanged, Threaded, and Welding End, ASME Standard B16.34-1996. These tables must be used in accordance with the ASME
standard. The ASME standard states in paragraph 2.1.2: 2.1.2 Special Class Valves. Threaded or welding end valves which conform to all the requirements of para. 2.1.1 and in
addition have successfully passed the examinations required by Section 8, may be designated Special Class valves. Ratings shall not exceed the values shown in those Tables 2
having an identifying suffix B. Special Class ratings shall not be used for flanged end valves. Information copied with permission of the publisher; The American Society of Mechanical
Engineers, 345 East 47th Street, New York, New York, 10017.
2. At temperatures over 1000_F, use material only when carbon content is 0.04% or higher.
Product Bulletin
59.1:021
August 2002
Standard Pressure-Temperature Ratings for ANSI Class 600 and 900 Valves
Fisher valve materials that conform to ASME B16.34-1996 Standard Class pressure-temperature ratings are listed
in tables 6 and 7. These ratings apply to all Fisher cast, forged, and fabricated steel valves.
Table 6. For ANSI Standard Class 600 Valves (1)
WORKING PRESSURE (PSIG)
SERVICE
TEMPERATURE (_F)
LCB
LCC
WCB
WCC
WC6
WC9
20 to 100
200
300
400
500
1390
1315
1275
1235
1165
1500
1500
1455
1410
1330
1480
1350
1315
1270
1200
1500
1500
1455
1410
1330
1500
1500
1445
1385
1330
1500
1500
1455
1410
1330
1440
1200
1080
995
930
1440
1240
1120
1025
955
1440
1240
1120
1025
955
1200
1015
910
825
765
1440
1240
1120
1025
955
1440
1320
1230
1145
1080
600
650
700
750
800
1065
1045
-------
1210
1175
-------
1095
1075
1065
1010
825
1210
1175
1135
1010
825
1210
1175
1135
1065
1015
1210
1175
1135
1065
1015
875
860
850
830
805
905
890
870
855
845
905
890
870
855
845
720
700
685
670
660
905
890
870
855
845
1025
1010
990
985
975
850
900
950
1000
1050
-----------
-----------
-----------
-----------
975
900
640
430
---
975
900
755
520
350
790
780
765
640
615
835
830
775
700
685
835
---------
645
---------
835
830
775
700
---
970
900
775
725
720
1100
1150
1200
1250
1300
-----------
-----------
-----------
-----------
-----------
-----------
515
400
310
225
170
610
475
370
295
235
-----------
-----------
-----------
645
550
345
245
185
1350
1400
1450
1500
---------
---------
---------
---------
---------
---------
125
95
70
55
190
150
115
85
---------
---------
---------
135
110
80
70
316L
1. Table information is extracted from the ValveFlanged, Threaded, and Welding End, ASME Standard B16.34-1996. These tables must be used in accordance with the ASME
standard. The ASME standard states in paragraph 1.2.2: 1.2.2 Code and Regulations. A valve used under the jurisdiction of the ASME Boiler and Pressure Vessel Code, ASME Code
for Pressure Piping, or governmental regulations is subject to any limitation of that code or regulation. This includes any maximum temperature limitation for a material or rule governing
the use of a material at a low temperature. Information copied with permission of the publisher; The American Society of Mechanical Engineers, 345 East 47th Street, New York, New
York, 10017.
2. At temperatures over 1000_F, use material only when carbon content is 0.04% or higher.
SERVICE
TEMPERATURE (_F)
LCB
LCC
WCB
WCC
WC6
WC9
20 to 100
200
300
400
500
2085
1970
1915
1850
1745
2250
2250
2185
2115
1995
2220
2025
1970
1900
1795
2250
2250
2185
2115
1995
2250
2250
2165
2080
1995
2250
2250
2185
2115
1995
2160
1800
1620
1490
1395
2160
1860
1680
1540
1435
2160
1860
1680
1540
1435
1800
1520
1360
1240
1145
2160
1860
1680
1540
1435
2160
1980
1845
1720
1620
600
650
700
750
800
1600
1570
-------
1815
1765
-------
1640
1610
1600
1510
1235
1815
1765
1705
1510
1235
1815
1765
1705
1595
1525
1815
1765
1705
1595
1525
1310
1290
1275
1245
1210
1355
1330
1305
1280
1265
1355
1330
1305
1280
1265
1080
1050
1030
1010
985
1355
1330
1305
1280
1265
1540
1510
1485
1475
1460
850
900
950
1000
1050
-----------
-----------
-----------
-----------
1460
1350
955
650
---
1460
1350
1130
780
525
1190
1165
1145
965
925
1255
1245
1160
1050
1030
1255
---------
965
---------
1255
1245
1160
1050
---
1455
1350
1160
1090
1080
1100
1150
1200
1250
1300
-----------
-----------
-----------
-----------
-----------
-----------
770
595
465
340
255
915
710
555
440
350
-----------
-----------
-----------
965
825
515
370
280
1350
1400
1450
1500
---------
---------
---------
---------
---------
---------
185
145
105
80
290
225
175
125
---------
---------
---------
205
165
125
105
316L
1. Table information is extracted from the ValveFlanged, Threaded, and Welding End, ASME Standard B16.34-1996. These tables must be used in accordance with the ASME
standard. The ASME standard states in paragraph 1.2.2: 1.2.2 Code and Regulations. A valve used under the jurisdiction of the ASME Boiler and Pressure Vessel Code, ASME Code
for Pressure Piping, or governmental regulations is subject to any limitation of that code or regulation. This includes any maximum temperature limitation for a material or rule governing
the use of a material at a low temperature. Information copied with permission of the publisher; The American Society of Mechanical Engineers, 345 East 47th Street, New York, New
York, 10017.
2. At temperatures over 1000_F, use material only when carbon content is 0.04% or higher.
Product Bulletin
59.1:021
August 2002
WCB
WCC
WC6
CF3M
316L
CG8M or 317
20 to 100
200
300
400
500
1390
1390
1390
1390
1390
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1485
1450
1440
1500
1355
1200
1105
1035
1500
1380
1250
1140
1065
1500
1380
1250
1140
1065
1340
1130
1010
920
850
1500
1380
1250
1140
1065
1500
1430
1310
1235
1190
600
650
700
750
800
1390
1360
-------
1500
1500
-------
1425
1400
1390
1260
1030
1500
1500
1425
1260
1030
1500
1500
1465
1460
1440
1440
1430
1425
1380
1345
975
960
945
925
900
1005
985
970
950
945
1005
985
970
950
945
805
780
765
745
735
1005
985
970
950
945
1145
1125
1105
1095
1090
850
900
950
1000
1050
-----------
-----------
-----------
-----------
1355
1175
795
540
---
1285
1200
945
650
435
885
865
850
815
770
930
925
915
840
840
930
---------
720
---------
930
925
915
840
---
1080
1075
945
840
840
1100
1150
1200
1250
1300
-----------
-----------
-----------
-----------
-----------
-----------
645
495
385
285
215
765
590
465
370
290
-----------
-----------
-----------
805
685
430
310
230
1350
1400
1450
1500
---------
---------
---------
---------
---------
---------
155
120
85
70
240
190
145
105
---------
---------
---------
170
135
105
85
1. Table information is extracted from the ValveFlanged, Threaded, and Welding End, ASME Standard B16.34-1996. These tables must be used in accordance with the ASME
standard. The ASME standard states in paragraph 2.1.2: 2.1.2 Special Class Valves. Threaded or welding end valves which conform to all the requirements of para. 2.1.1 and in
addition have successfully passed the examinations required by Section 8, may be designated Special Class valves. Ratings shall not exceed the values shown in those Tables 2
having an identifying suffix B. Special Class ratings shall not be used for flanged end valves. Information copied with permission of the publisher; The American Society of Mechanical
Engineers, 345 East 47th Street, New York, New York, 10017.
2. At temperatures over 1000_F, use material only when carbon content is 0.04% or higher.
SERVICE
TEMPERATURE (_F) LCB
LCC
WCB
WCC
WC6
WC9
20 to 100
200
300
400
500
2085
2085
2085
2085
2085
2250
2250
2250
2250
2250
2250
2250
2250
2250
2250
2250
2250
2250
2250
2250
2250
2250
2250
2250
2250
2250
2250
2225
2175
2160
2250
2005
1800
1660
1555
2250
2070
1870
1710
1595
2250
2070
1870
1710
1595
2005
1695
1520
1385
1280
2250
2070
1870
1710
1595
2250
2145
1965
1850
1785
600
650
700
750
800
2080
2040
-------
2250
2250
-------
2140
2100
2080
1890
1545
2250
2250
2135
1890
1545
2250
2250
2200
2185
2160
2160
2145
2135
2070
2020
1465
1440
1415
1390
1350
1510
1480
1455
1425
1415
1510
1480
1455
1425
1415
1205
1170
1145
1120
1100
1510
1480
1455
1425
1415
1720
1690
1655
1645
1630
850
900
950
1000
1050
-----------
-----------
-----------
-----------
2030
1760
1195
810
---
1930
1800
1415
975
655
1325
1300
1275
1220
1115
1400
1390
1375
1260
1260
1400
---------
1075
---------
1400
1390
1375
1260
---
1625
1615
1415
1260
1260
1100
1150
1200
1250
1300
-----------
-----------
-----------
-----------
-----------
-----------
965
745
580
425
320
1145
885
695
555
435
-----------
-----------
-----------
1210
1030
645
465
345
1350
1400
1450
1500
---------
---------
---------
---------
---------
---------
230
180
130
105
360
285
200
155
---------
---------
---------
255
205
155
130
316L
1. Table information is extracted from the ValveFlanged, Threaded, and Welding End, ASME Standard B16.34-1996. These tables must be used in accordance with the ASME
standard. The ASME standard states in paragraph 2.1.2: 2.1.2 Special Class Valves. Threaded or welding end valves which conform to all the requirements of para. 2.1.1 and in
addition have successfully passed the examinations required by Section 8, may be designated Special Class valves. Ratings shall not exceed the values shown in those Tables 2
having an identifying suffix B. Special Class ratings shall not be used for flanged end valves. Information copied with permission of the publisher; The American Society of Mechanical
Engineers, 345 East 47th Street, New York, New York, 10017.
2. At temperatures over 1000_F, use material only when carbon content is 0.04% or higher.
Product Bulletin
59.1:021
August 2002
Standard Pressure-Temperature Ratings for ANSI Class 1500 and 2500 Valves
Fisher valve materials that conform to ASME B16.34-1996 Standard Class pressure-temperature ratings are listed
in tables 10 and 11. These ratings apply to all Fisher cast, forged, and fabricated steel valves.
Table 10. For ANSI Standard Class 1500 Valves (1)
WORKING PRESSURE (PSIG)
SERVICE
TEMPERATURE (_F)
LCB
LCC
WCB
WCC
WC6
WC9
20 to 100
200
300
400
500
3470
3280
3190
3085
2910
3750
3750
3640
3530
3325
3705
3375
3280
3170
2995
3750
3750
3640
3530
3325
3750
3750
3610
3465
3325
3750
3750
3640
3530
3325
3600
3000
2700
2485
2330
3600
3095
2795
2570
2390
3600
3095
2795
2570
2390
3000
2530
2270
2065
1910
3600
3095
2795
2570
2390
3600
3300
3070
2870
2700
600
650
700
750
800
2665
2615
-------
3025
2940
-------
2735
2685
2665
2520
2060
3025
2940
2840
2520
2060
3025
2940
2840
2660
2540
3025
2940
2840
2660
2540
2185
2150
2125
2075
2015
2255
2220
2170
2135
2110
2255
2220
2170
2135
2110
1800
1750
1715
1680
1645
2255
2220
2170
2135
2110
2570
2520
2470
2460
2435
850
900
950
1000
1050
-----------
-----------
-----------
-----------
2435
2245
1595
1080
---
2435
2245
1885
1305
875
1980
1945
1910
1605
1545
2090
2075
1930
1750
1720
2090
---------
1610
---------
2090
2075
1930
1750
---
2425
2245
1930
1820
1800
1100
1150
1200
1250
1300
-----------
-----------
-----------
-----------
-----------
-----------
1285
995
770
565
430
1525
1185
925
735
585
-----------
-----------
-----------
1610
1370
855
615
465
1350
1400
1450
1500
---------
---------
---------
---------
---------
---------
310
240
170
135
480
380
290
205
---------
---------
---------
345
275
205
170
316L
1. Table information is extracted from the ValveFlanged, Threaded, and Welding End, ASME Standard B16.34-1996. These tables must be used in accordance with the ASME
standard. The ASME standard states in paragraph 1.2.2: 1.2.2 Code and Regulations. A valve used under the jurisdiction of the ASME Boiler and Pressure Vessel Code, ASME Code
for Pressure Piping, or governmental regulations is subject to any limitation of that code or regulation. This includes any maximum temperature limitation for a material or rule governing
the use of a material at a low temperature. Information copied with permission of the publisher; The American Society of Mechanical Engineers, 345 East 47th Street, New York, New
York, 10017.
2. At temperatures over 1000_F, use material only when carbon content is 0.04% or higher.
SERVICE
TEMPERATURE (_F)
LCB
LCC
WCB
WCC
WC6
WC9
20 to 100
200
300
400
500
5785
5470
5315
5145
4850
6250
6250
6070
5880
5540
6170
5625
5470
5280
4990
6250
6250
6070
5880
5540
6250
6250
6015
5775
5540
6250
6250
6070
5880
5540
6000
5000
4500
4140
3880
6000
5160
4660
4280
3980
6000
5160
4660
4280
3980
5000
4220
3780
3440
3180
6000
5160
4660
4280
3980
6000
5500
5120
4780
4500
600
650
700
750
800
4440
4355
-------
5040
4905
-------
4560
4475
4440
4200
3430
5040
4905
4730
4200
3430
5040
4905
4730
4430
4230
5040
4905
4730
4430
4230
3640
3580
3540
3460
3360
3760
3700
3620
3560
3520
3760
3700
3620
3560
3520
3000
2920
2860
2800
2740
3760
3700
3620
3560
3520
4280
4200
4120
4100
4060
850
900
950
1000
1050
-----------
-----------
-----------
-----------
4060
3745
2655
1800
---
4060
3745
3145
2170
1455
3300
3240
3180
2675
2570
3480
3460
3220
2915
2865
3480
---------
2680
---------
3480
3460
3220
2915
---
4040
3745
3220
3030
3000
1100
1150
1200
1250
1300
-----------
-----------
-----------
-----------
-----------
-----------
2145
1655
1285
945
715
2545
1970
1545
1230
970
-----------
-----------
-----------
2685
2285
1430
1030
770
1350
1400
1450
1500
---------
---------
---------
---------
---------
---------
515
400
285
230
800
630
485
345
---------
---------
---------
570
455
345
285
316L
1. Table information is extracted from the ValveFlanged, Threaded, and Welding End, ASME Standard B16.34-1996. These tables must be used in accordance with the ASME
standard. The ASME standard states in paragraph 1.2.2: 1.2.2 Code and Regulations. A valve used under the jurisdiction of the ASME Boiler and Pressure Vessel Code, ASME Code
for Pressure Piping, or governmental regulations is subject to any limitation of that code or regulation. This includes any maximum temperature limitation for a material or rule governing
the use of a material at a low temperature. Information copied with permission of the publisher; The American Society of Mechanical Engineers, 345 East 47th Street, New York, New
York, 10017.
2. At temperatures over 1000_F, use material only when carbon content is 0.04% or higher.
Product Bulletin
59.1:021
August 2002
WCB
WCC
WC6
CF3M
316L
CG8M or 317
20 to 100
200
300
400
500
3470
3470
3470
3470
3470
3750
3750
3750
3750
3750
3750
3750
3750
3750
3750
3750
3750
3750
3750
3750
3750
3750
3750
3750
3750
3750
3750
3705
3620
3600
3750
3345
3000
2765
2595
3750
3450
3120
2850
2655
3750
3450
3120
2850
2655
3345
2825
2530
2305
2130
3750
3450
3120
2850
2655
3750
3580
3280
3085
2980
600
650
700
750
800
3470
3400
-------
3750
3750
-------
3565
3495
3470
3150
2570
3750
3750
3560
3150
2570
3750
3750
3665
3645
3600
3600
3580
3555
3450
3365
2440
2395
2355
2315
2250
2520
2465
2420
2380
2355
2520
2465
2420
2380
2355
2010
1950
1910
1865
1835
2520
2465
2420
2380
2355
2865
2815
2760
2745
2720
850
900
950
1000
1050
-----------
-----------
-----------
-----------
3385
2935
1995
1350
---
3215
3000
2355
1630
1095
2205
2165
2120
2035
1930
2330
2315
2290
2105
2105
2330
---------
1795
---------
2330
2315
2290
2105
---
2705
2690
2360
2105
2105
1100
1150
1200
1250
1300
-----------
-----------
-----------
-----------
-----------
-----------
1605
1245
965
705
535
1905
1480
1155
920
730
-----------
-----------
-----------
2015
1715
1070
770
580
1350
1400
1450
1500
---------
---------
---------
---------
---------
---------
385
300
215
170
600
470
365
260
---------
---------
---------
430
345
255
215
1. Table information is extracted from the ValveFlanged, Threaded, and Welding End, ASME Standard B16.34-1996. These tables must be used in accordance with the ASME
standard. The ASME standard states in paragraph 2.1.2: 2.1.2 Special Class Valves. Threaded or welding end valves which conform to all the requirements of para. 2.1.1 and in
addition have successfully passed the examinations required by Section 8, may be designated Special Class valves. Ratings shall not exceed the values shown in those Tables 2
having an identifying suffix B. Special Class ratings shall not be used for flanged end valves. Information copied with permission of the publisher; The American Society of Mechanical
Engineers, 345 East 47th Street, New York, New York, 10017.
2. At temperatures over 1000_F, use material only when carbon content is 0.04% or higher.
SERVICE
TEMPERATURE (_F) LCB
LCC
WCB
WCC
WC6
WC9
20 to 100
200
300
400
500
5785
5785
5785
5785
5785
6250
6250
6250
6250
6250
6250
6250
6250
6250
6250
6250
6250
6250
6250
6250
6250
6250
6250
6250
6250
6250
6250
6180
6035
6000
6250
5570
5000
4605
4320
6250
5750
5200
4750
4430
6250
5750
5200
4750
4430
5570
4710
4215
3840
3550
6250
5750
5200
4750
4430
6250
5965
5465
5145
4965
600
650
700
750
800
5780
5670
-------
6250
6250
-------
5940
5825
5780
5250
4285
6250
6250
5930
5250
4285
6250
6250
6110
6070
6000
6000
5965
5930
5750
5605
4065
3995
3930
3855
3750
4195
4105
4035
3965
3930
4195
4105
4035
3965
3930
3350
3250
3180
3110
3060
4195
4105
4035
3965
3930
4775
4690
4600
4570
4530
850
900
950
1000
1050
-----------
-----------
-----------
-----------
5645
4895
3320
2250
---
5355
5000
3930
2715
1820
3680
3605
3535
3395
3215
3885
3855
3815
3505
3505
3885
---------
2990
---------
3885
3855
3815
3505
---
4510
4485
3930
3505
3505
1100
1150
1200
1250
1300
-----------
-----------
-----------
-----------
-----------
-----------
2680
2070
1605
1180
895
3180
2465
1930
1535
1215
-----------
-----------
-----------
3360
2855
1785
1285
965
1350
1400
1450
1500
---------
---------
---------
---------
---------
---------
645
500
355
285
1000
785
610
430
---------
---------
---------
715
570
430
355
316L
1. Table information is extracted from the ValveFlanged, Threaded, and Welding End, ASME Standard B16.34-1996. These tables must be used in accordance with the ASME
standard. The ASME standard states in paragraph 2.1.2: 2.1.2 Special Class Valves. Threaded or welding end valves which conform to all the requirements of para. 2.1.1 and in
addition have successfully passed the examinations required by Section 8, may be designated Special Class valves. Ratings shall not exceed the values shown in those Tables 2
having an identifying suffix B. Special Class ratings shall not be used for flanged end valves. Information copied with permission of the publisher; The American Society of Mechanical
Engineers, 345 East 47th Street, New York, New York, 10017.
2. At temperatures over 1000_F, use material only when carbon content is 0.04% or higher.
Product Bulletin
59.1:021
August 2002
Standard and Special Pressure-Temperature Ratings for ANSI Class 4500 Valves
Fisher valve materials that conform to ASME B16.34-1996 Standard and Special Class pressure-temperature
ratings are listed in tables 14 and 15. These ratings apply to all Fisher cast, forged, and fabricated steel valves.
Table 14. For ANSI Standard Class 4500 Valves (1)
WORKING PRESSURE (PSIG)
SERVICE
TEMPERATURE (_F)
LCB
LCC
WCB
WCC
WC6
WC9
20 to 100
200
300
400
500
10415
9845
9565
9260
8735
11250
11250
10925
10585
9965
11110
10120
9845
9505
8980
11250
11250
10925
10585
9965
11250
11250
10830
10400
9965
11250
11250
10925
10585
9965
10800
9000
8100
7450
6985
10800
9290
8390
7705
7165
10800
9290
8390
7705
7165
9000
7595
6805
6190
5725
10800
9290
8390
7705
7165
10800
9900
9215
8605
8100
600
650
700
750
800
7990
7840
-------
9070
8825
-------
8210
8055
7990
7560
6170
9070
8825
8515
7560
6170
9070
8825
8515
7970
7610
9070
8825
8515
7970
7610
6550
6445
6370
6230
6050
6770
6660
6515
6410
6335
6770
6660
6515
6410
6335
5400
5255
5150
5040
4930
6770
6660
6515
6410
6335
7705
7560
7415
7380
7310
850
900
950
1000
1050
-----------
-----------
-----------
-----------
7305
6740
4785
3240
---
7305
6740
5665
3910
2625
5940
5830
5725
4815
4630
6265
6230
5795
5245
5155
6265
---------
4825
---------
6265
6230
5795
5245
---
7270
6740
5795
5450
5400
1100
1150
1200
1250
1300
-----------
-----------
-----------
-----------
-----------
-----------
3855
2985
2315
1695
1285
4575
3550
2775
2210
1750
-----------
-----------
-----------
4835
4115
2570
1850
1390
1350
1400
1450
1500
---------
---------
---------
---------
---------
---------
925
720
515
410
1440
1130
875
620
---------
---------
---------
1030
825
615
515
316L
1. Table information is extracted from the ValveFlanged, Threaded, and Welding End, ASME Standard B16.34-1996. These tables must be used in accordance with the ASME
standard. The ASME standard states in paragraph 1.2.2: 1.2.2 Code and Regulations. A valve used under the jurisdiction of the ASME Boiler and Pressure Vessel Code, ASME Code
for Pressure Piping, or governmental regulations is subject to any limitation of that code or regulation. This includes any maximum temperature limitation for a material or rule governing
the use of a material at a low temperature. Information copied with permission of the publisher; The American Society of Mechanical Engineers, 345 East 47th Street, New York, New
York, 10017.
2. At temperatures over 1000_F, use material only when carbon content is 0.04% or higher.
SERVICE
TEMPERATURE (_F)
LCB
LCC
WCB
WCC
WC6
WC9
20 to 100
200
300
400
500
10415
10415
10415
10415
10415
11250
11250
11250
11250
11250
11250
11250
11250
11250
11250
11250
11250
11250
11250
11250
11250
11250
11250
11250
11250
11250
11250
11120
10865
10800
11250
10030
9000
8295
7780
11250
10350
9360
8550
7970
11250
10350
9360
8550
7970
10030
8480
7585
6910
6390
11250
10350
9360
8550
7970
11250
10735
9835
9255
8935
600
650
700
750
800
10405
10205
-------
11250
11250
-------
10690
10485
10405
9450
7715
11250
11250
10670
9450
7715
11250
11250
10995
10930
10800
10800
10735
10670
10350
10095
7315
7190
7070
6945
6750
7555
7395
7265
7135
7070
7555
7395
7265
7135
7070
6025
5850
5720
5595
5505
7555
7395
7265
7135
7070
8600
8440
8275
8230
8155
850
900
950
1000
1050
-----------
-----------
-----------
-----------
10160
8805
5980
4050
---
9645
9000
7070
4885
3280
6620
6495
6365
6105
5785
6990
6945
6870
6310
6310
6990
---------
5385
---------
6990
6945
6870
6310
---
8115
8075
7070
6310
6310
1100
1150
1200
1250
1300
-----------
-----------
-----------
-----------
-----------
-----------
4820
3730
2895
2120
1605
5720
4435
3470
2765
2185
-----------
-----------
-----------
6045
5145
3215
2315
1735
1350
1400
1450
1500
---------
---------
---------
---------
---------
---------
1155
900
645
515
1800
1415
1095
770
---------
---------
---------
1285
1030
770
645
316L
1. Table information is extracted from the ValveFlanged, Threaded, and Welding End, ASME Standard B16.34-1996. These tables must be used in accordance with the ASME
standard. The ASME standard states in paragraph 2.1.2: 2.1.2 Special Class Valves. Threaded or welding end valves which conform to all the requirements of para. 2.1.1 and in
addition have successfully passed the examinations required by Section 8, may be designated Special Class valves. Ratings shall not exceed the values shown in those Tables 2
having an identifying suffix B. Special Class ratings shall not be used for flanged end valves. Information copied with permission of the publisher; The American Society of Mechanical
Engineers, 345 East 47th Street, New York, New York, 10017.
2. At temperatures over 1000_F, use material only when carbon content is 0.04% or higher.
Product Bulletin
59.1:021
August 2002
Product Bulletin
59.1:021
August 2002
Fisher is a mark owned by Fisher Controls International, Inc., a business of Emerson Process Management. The Emerson logo is a
trademark and service mark of Emerson Electric Co. All other marks are the property of their respective owners.
The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy,
they are not to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use
or applicability. We reserve the right to modify or improve the designs or specifications of such products at any time without notice.
Fisher does not assume responsibility for the selection, use or maintenance of any product. Responsibility for proper selection, use and
maintenance of any Fisher product remains solely with the purchaser and end-user.
Emerson Process Management
Fisher
Marshalltown, Iowa 50158 USA
Cernay 68700 France
Sao Paulo 05424 Brazil
Singapore 128461
www.Fisher.com
12
EFisher
Controls International, Inc. 1989, 2002; All Rights Reserved
Printed in USA