Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
UNIT I COIMBATORE
LMW
1.
MACHINERY PLAN AND DETAILS: Enclosed: Layout drawing Foundation drawing 45 E 002 45 E 003
2.
FLOORING: Solid concrete, level flooring for entire machine. In creel, creel support area to be with concrete.
3.
DRIVE: Main motor 11 KWl1450rpm (Actual power consumption: 7 KW) 2.2 KW / 2830 rpm 1.5 KW / 31 rpm 0.3 KW 15 KW
$Z%
t ~ ;
04
Suction motor Detaching motor Control Panel box Total installed power
4.
g?~
2
gzu +WE 0 EL z E0
k%Z
8g t
3Jw
- :!iE e
SYu ole:
+w+
$2:~
POWER SUPPLY: (a) Provide 3 phase Power line through 4 core cable and Isolator with proper earthing arrangements. Mains Voltage 415*6%, 3 phase, 50 Hz. Incoming cable size for Lap former 4x6 sq.mm (Copper). lncoming power line should have back up fuse of 63A.
gzz
5lo ~ 2 F
$$:
(b) (c) 5.
&
BY" z:?
Mills to provide for Lap former machine, compressed air supply pipe line with a Stop Valve and Reducer with a female bore to connect with the Adaptor of G1/2" dia on the machine.
Compressed air required for Lap former machine - 3 Nm3/hrat 6 kg/cm2 To connect to 16mm dia inlet on the machine.
Central suction : Static pressure = 70mm Water Column Discharge of air = 0.47 cu.m Isec.
JZTNTR~LLCD j COPY
LMW
6.
: 07109 : 02 of 02
ACCESSORIES:
(a)
Lap Spools are of special construction and composition in sizes of : 300.2k0.2 mm for Lap former Tool Kit: One set of special tools, gauges and lifting jack assembly are supplied along with the machine.
(b)
7.
(b)
(c)
d)
8.
LUBRICATION:
Lubricatingoil and greases to be procured as per the lnstructions and Lubrication Charts. Also refer the General Lubrication lnstructions D l 7c.
9.
10.
EXHAUST AIR:
Exhaust air into department. Volume of air discharges per machine is 0.6 m3/sec.
11.
Continuous deviation from the nominal voltage by *6%. Voltage peaks 200% of nominal voltage (effective value) lasting not more than 1.5 millisec. Mains supply frequency max, deviation from nominal frequency is 2%.
Revisions
CONTROLLFD COPY --
_I