Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Content
Itotal solution introduction .....................................................................................................................................................- 1 II. How does Jointechs fuel monitoring solution differ from others? ........................................................................- 3 III. The powerful tracking software with fuel consumption reports ...........................................................................- 4 IV. The advanced technology of Jointechs high resolution and sawed-off sensor...............................................- 9 -
Monitoring multi fuel level of tank The high resolution capacitive fuel sensor The fuel sensor could be sawed into any length you want on spot; Real time fuel monitoring and fuel analyzing report accurately
-1-
Jointech offer: Smart tracker : GP6000 Monitor up to 9 fuel signal, Configure alarms parameter for each fuel tank.
-2-
II. How does Jointechs fuel monitoring solution differ from others?
Do you have the following trouble? 1. Poor resolution for the fuel sensor with float; and sometimes the float stop to work because of adhesion; 2. The fuel sensor could not be sawed on spot; 3. Two fuel tank monitoring could not be done correctly; 4. Diesel stolen; hard to take the evidence of giving fake charging invoice 5. Poor accuracy of the report for the driver working status 6. Poor analyzing report 7. Poor ROI analyzing.
you can find out when you use JOINTECHS fuel monitoring solution: Where, when, how many litres your diesel has been stolen? Where, how many diesels you have consume? Where the vehicle is in idling state? How many litres you have wasted in idling?
-3-
-4-
There are 3 parts in the fuel real time monitoring interface. The fuel abnormal consumption alarms could be send via software, SMS, Email real time sending. You could also trigger the camera to take photos of the fuel tank. When the fuel alarm was creating .
-5-
Comprehensive analyzing the speed, fuel consumption, mileage, engine status and other status of vehicle ; If the mileage is not adding, no speed, fuel decrease slowly, engine on, then we judge it as idling status; If the mileage is not increasing, no speed, fuel level decrease quickly, engine off, we judge it as : FUEL stolen. If the mileage is not increasing, no speed, fuel level increase quickly, engine off, we judge it : Fuel charging.
-6-
In order to have an accurate report, jointech fuel level monitor software optimize the parameter: 4 Fuel analyse general report
-7-
-8-
IV. The advanced technology of Jointechs high resolution and sawed-off sensor
1. Comparison list with normal float sensor Type Jointech capacitive fuel sensor Reed Switch fuel sensor
Picture
Distributed resistance
The sensor part is a coaxes There is magnetic inside the container, capacity between reedswitch, which can made switch the sensor body and induction inside the sensor close/open, it electorde would be changed leads to the change of resistance, when the oil gets into the the required signal would be container,which can be available after circuit transformation. transformed by the circuit, then get the required signal by precise compensation of linear and temperature. 0.5% 2%
Accuracy
-9-
1mm <10mA
12mm/21mm 500 mA
DC 12-28V
Customization
resistance, current, voltage resistance, current, voltage analog analog signal output signal output RS485,RS232 digital signal output M201.5M272M181.5 M161 M5 screw Flange installation DN40DN50 Remote configuration DN25 2 mm thick NBR gasket
Installation
command
Not required reedswitch the reedswith cant be moved due to magnetic adsorption of dust in the oil, which may lead to accuracy distortion
No reedswitch Structure
The sensor can be cut according customized length 0.01~2m to your needs 2. Fuel sensor installation illustration:
- 10 -
- 11 -