Sei sulla pagina 1di 4

X2000UC2

STANDARD FEATURES
Electronic governor Mechanically welded chassis with antivibration suspension Air cooler for wiring Tof 38/40C max with electric fan Exhaust outlet with flexible and flanges 24 V charging alternator and starter Supplied with oil User manual and commissioning guide

Tiers 2 Engine MTU , 16V4000G43E Alternator LEROY SOMER , LSA51.2M60

Voltage 480/277 440/254

Power ESP kWe/kVA 2000 / 2500 1920 / 2400

Power PRP kWe/kVA 1818 / 2273 1745 / 2182

Standby Amps 3007 3149

Dimensions Length: 4618mm [182in] Width: 1885mm [74in] Heigth: 2158mm [85in]

Weight 13280kg [29277 lbs] Net 13870kg [30578 lbs] Gross

POWER DEFINITION
PRP : Prime Power is available for an unlimited number of annual operating hours in variable load applications, in accordance with ISO 8528-1. A 10% overload capability is available for a period of 1 hour within 12-hour period of operation, in accordance with ISO 3046-1 ESP : The standby power rating is applicable for supplying emergency power in variable load applications in accordance with ISO 8528-1. Overload is not allowed.

TERM OF USE
Standard reference conditions C Air Intlet Temp, m A.S.L. 60 % relative humidity. All engine performance data based on the above mentioned maximum continuous ratings.

Type

dB(A)@1m

dB(A)@7m

EUR40SSi

82

72

EUR40Si

88

78

Dimensions Length: 12192mm [480in] Width: 2438mm [96in] Heigth: 2896mm [114in] Length: 12192mm [480in] Width: 2438mm [96in] Heigth: 2896mm [114in]

Weight 26401kg [58204lbs] Net 27931kg [61577lbs] Gross 25711kg [56683lbs] Net 27242kg [60058lbs] Gross

Tank

500 L

500 L

This document is not contractual - The SDMO company reserves the right to modify any of the characteristics stated in this CD Rom without notice, in a constant effort to improve the quality of its products.

SDMO Industries 12bis rue de la Villeneuve CS 92848 29 228 BREST CEDEX 2 Tel +33 (0)2 98 41 41 41 Fax : +33 (0)2 98 41 63 07 www.sdmo.com

ENGINE SPECIFICATIONS
Manufacturer / Model Cylinder Arrangement Displacement Bore and Stroke Compression ratio Rated RPM Piston Speed Max. stand by Power at rated RPM Frequency regulation, steady state BMEP Governor : type Exhaust temperature Exhaust gas flow Max back pressure 110% (Stand By power ) 100% (of the Prime Power) 75% (of the Prime Power) 50% (of the Prime Power) Max. fuel pump flow Total oil capacity w/filters Oil Pressure low idle Oil Pressure rated RPM Oil consumption 100% load Oil capacity carter Heat rejection to exhaust Radiated heat to ambiant Heat rejection to coolant Max. intake restriction Engine air flow Radiator & engine capacity Max water temperature Outlet water temperature Fan power Fan air flow w/o restriction Available restriction on air flow Type of coolant Thermostat PM CO HC/Nox MTU 16V4000G43E , 4-strokes, Turbo , Air/Water DC 16 X V 76.32L [4657.3C.I.] 170mm [6.7in.] X 210mm [8.3in.] 16.5 1800 Rpm 12.6m/s [41.3ft./s] 2280kW [3055BHP] +/- 0.5% 17.7bar [256psi] ELEC 435C [815F] 7100L/s [15046cfm] 300mm CE [12in. WG] [N/A] 482L/h [127.3gal/hr] 377L/h [99.6gal/hr] 262L/h [69.2gal/hr] 1500L/h [396.3gal/hr] 300L [79.3gal] 3.5bar [50.7psi] 7bar [101.4psi] 2.41L/h [0.637gal/hr] 240L [63.4gal] [N/A] 90kW [5117Btu/mn] N/A 150mm CE [6in. WG] 3000L/s [6357cfm] [N/A] 104C [219F] 93C [199F] [N/A] [N/A] [N/A] Coolelf mdx 79/92 C 0.15 gr/bhp/h 2.61 gr/bhp/h 4.77 gr/bhp/h Max

STANDARD FEATURES

EXHAUST SYSTEM

FUEL SYSTEM

OIL SYSTEM

THERMAL BALANCE AIR INTAKE

COOLANT SYSTEM

EMISSIONS LEVEL

This document is not contractual - The SDMO company reserves the right to modify any of the characteristics stated in this CD Rom without notice, in a constant effort to improve the quality of its products.

SDMO Industries 12bis rue de la Villeneuve CS 92848 29 228 BREST CEDEX 2 Tel +33 (0)2 98 41 41 41 Fax : +33 (0)2 98 41 63 07 www.sdmo.com

ALTERNATOR SPECIFICATIONS
Manufacturer Type Number of phase Power factor (Cos Phi) Altitude Overspeed Pole : number Exciter type Insulation : class, temperature rise Voltage regulator Total harmonics (TGH/THC) Wave form : NEMA = TIF TGH/THC Wave form : CEI = FHT TGH/THC Bearing : number Coupling Voltage regulation 0 to 100% load Recovery time (20% Volt dip) ms SkVA with 90% of nominal sustained voltage (at 0.4PF) Continuous nominal rating @ 40C Standby rating @ 27C Efficiencies @ 4/4 load Air flow Short circuit ratio;50 (Kcc) Direct axis synchro reactance unsaturated (Xd) Quadra axis synchro reactance unsaturated (Xq) Open circuit time constant;50 (Tdo) Direct axis transient reactance saturated (Xd) Short circuit transient time constant (Td) Direct axis subtransient reactance saturated (Xd) Subtransient time constant (Td) Quadra axis subtransient reactance saturated (Xq) Zero sequence reactance unsaturated (Xo) Negative sequence reactance saturated (X2) Armature time constant (Ta) No load excitation current (io) Full load excitation current (ic) Full load excitation voltage (uc) Recovery time (Delta U = 20% transitoire) Motor start (Delta = 20% perm. Or 50% trans.) Transient dip (4/4 charge) PF : 1.8 AR No load losses Heat rejection LEROY SOMER LSA51.2M60 3 0.8 < 1000 m 2250 rpm 4 AREP H /H R449 <4% < 50 < 2% 1 Direct +/- 1% < 700 ms N/A 2460 kVA 2640 kVA 95.4 % 2.5m3/s [5297.18cfm] 0.29 389 % 233 % 2800 ms 34.4 % 250 ms 15.2 % 23 ms 19 % 3.6 % 17.1 % 41 ms 1.5 A 5.9 A 62 V < 700 ms 4800 kVA 12 % 30.1 kW 88.3 kW

GENERAL DATAS

OTHER DATAS

This document is not contractual - The SDMO company reserves the right to modify any of the characteristics stated in this CD Rom without notice, in a constant effort to improve the quality of its products.

SDMO Industries 12bis rue de la Villeneuve CS 92848 29 228 BREST CEDEX 2 Tel +33 (0)2 98 41 41 41 Fax : +33 (0)2 98 41 63 07 www.sdmo.com

CONTROL PANEL
N/A_COFFRET

Option

M80
Specifications : Tachometer, Emergency stop button, client connection terminal strip, EC certified Engine parameters : Hours counter, Oil pressure gauge, Water temperature indicator, Oil pressure indicator

Option

TELYS
Specifications : Frequency meter, Ammeter, Voltmeter Alarms and faults Oil pressure, water temperature, No start-up, Overspeed, Min/max alternator, Min/max battery voltage, Low fuel level, Emergency stop Engine parameters Hours counter, Oil pressure, Water temperature, Engine speed, Battery voltage, Fuel level

Option

KERYS
Specifications : Frequency meter, Ammeter, Voltmeter Alarms and faults Oil pressure, water temperature, No start-up, Overspeed, Min/max alternator, Min/max battery voltage, Low fuel level, Emergency stop Engine parameters Hours counter, Oil pressure, Water temperature, Engine speed, Battery voltage, Fuel level Additional specifications Website, Troubleshooting, Assistance and Maintenance, Plotting and logging, Load impact, 8 configurations available, Compliance with international standards...

This document is not contractual - The SDMO company reserves the right to modify any of the characteristics stated in this CD Rom without notice, in a constant effort to improve the quality of its products.

SDMO Industries 12bis rue de la Villeneuve CS 92848 29 228 BREST CEDEX 2 Tel +33 (0)2 98 41 41 41 Fax : +33 (0)2 98 41 63 07 www.sdmo.com

Potrebbero piacerti anche