Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Junction Box
The 03002 is supplied with a 12 long x 1 IPS unthreaded aluminum pipe, which mounts to a crossarm via a CM220 Mount or 17953 NU-RAIL fitting (shown). Alternatively, the 03002 can mount to the top of a stainless-steel tripod via the CM216.
Ordering Information
Model Description
Recommended lead lengths for the Wind Sentry Set and Anemometer are listed on page 2.
03002-L 03101-L
Wind Sentry Set; enter lead length, in feet, after the -L. Wind Sentry Anemometer only; enter lead length, in feet, after the -L.
Mounts Compatible with both the 03002 and 03101 CM220 Right Angle Mounting Bracket for attaching a 03002 or 03101 to a crossarm, such as a CM202, CM204, or CM206. Sensor Mounting Kit for attaching the 03002 or 03101 to the top of a CM110, CM115, or CM120 stainless-steel tripod.
Crossarm
Mount for only the 03002 Wind Sentry Set CM220 Right Angle Mount 17953 1 x 1 NU-RAIL Fitting for mounting the 03002 Wind Sentry Set to a crossarm, such as a CM202, CM204, or CM206.
Mount for only the 03101 Wind Sentry Anemometer When purchased separately, the anemometer is supplied with a galvanized 10 long x 3/4 IPS threaded pipe, which mounts to a crossarm via a CM220 Mount or 1049 NU-RAIL fitting. Alternatively, it can mount to the top of a stainless-steel tripod via the CM216. 1049 x 1 NU-RAIL Fitting for mounting just the 03101 anemometer to a crossarm, such as a CM202, CM204, or CM206.
These lead lengths assume the sensor is mounted atop the tripod/tower via a CM202 crossarm.
Specifications
Wind Sentry Assembly Operating Temperature: -50 to +50C assuming non-riming conditions
Overall Height: 32 cm (12.6) Crossarm Length: 40 cm (15.7) between instruments (center-to-center) Mounting Diameter: 34 mm (1.34), mounts on standard 1.00 IPS pipe
815 W. 1800 N. | Logan, Utah | 84321-1784 | USA | (435) 753-2342 | www.campbellsci.com Australia | Brazil | Canada | England | France | Germany | South Africa | Spain | USA [headquarters]