Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Part #
PC9112
PC9111
Professional................................................................................................. .......$2495.00
PC9111LR
PC9206
PC9102
PC9301
PC9502
PC9302
PC9801
PC9803
PC9403
PC9602
PC9404
PC9202
Distinguished............................................................................................... .......$3295.00
PC9761
PC9751
PC9201
XC9131
XD Custom Competition......................................................................................$1695.00
XC9121
XC9101
XD Production...................................................................................................$1195.00
XD Carry..............................................................................................................$ 895.00
Subcompact calibers available: 9mm, .40S&W
Compact caliber available: .45ACP
Service calibers available: 9mm, .40S&W, .357Sig, .45GAP, .45ACP.
Tactical calibers available: 9mm, .40S&W, .45GAP, .45ACP
Revised 12-14-06
420 West Main St., Geneseo, IL 61254 Phone: (800) 680-6866 Fax: (309) 944-3676 customshop@springfield-armory.com
$1895.00
Tighten slide to frame fit; install national match .45ACP barrel & bushing; polish feed ramp; throat barrel; Springfield Custom match hammer & sear;
fit speed trigger w/custom tuned 4.5 lb. trigger pull; titanium firing pin w/extra power firing pin spring; tune for total reliability; lower & flare ejection port;
tune & polish extractor; standard 1911-A1 recoil spring guide w/heavy duty recoil spring; custom fit beavertail grip safety; custom fit ambidextrous
thumb safety; low mount Novak rear sight w/matching dovetail front sight; 3 dot tritium inserts in sights; custom fit S&A magazine well, matched to bevel
on frame; hand checker 20 LPI front strap; checker Cocobolo grips; carry bevel of complete pistol; deburr complete pistol internally; Black T finish
complete pistol; 6-Metalform 7 round magazines custom tune to pistol.
*$1385.00
Tighten slide to frame fit; install national match .45ACP barrel & bushing (bushing in 5 1911-A1 pistols only, shorter models receive match bull barrel system),
low mount Bomar rear sight, dovetail front sight, custom fit beavertail grip safety, match speed trigger, custom match hammer & sear, extended ambidextrous thumb safety, full
length guide rod, extended magazine release, heavy duty recoil spring & buffer system (buffer system in full length pistols only), extra power firing pin spring; recut barrel throat
& polish feed ramp; tune extractor; carry bevel all sharp edges of pistol; deburr complete pistol internally; smoothly tuned 3.5# trigger pull; lower &
flare ejection port; bevel & polish magazine well; parkerize or blue complete pistol; 2 Metalform 7 round magazines with slam pads.
**$975.00
Install TRP barrel & bushing (bull barrel system in pistols shorter or longer than 5), skelotonized delta hammer, low mount Novak rear sight & dovetail front sight with 3 dot tritium inserts (dovetail front sight & tritium inserts not available on ported 1911-A1 V10 models), extended ambidextrous thumb safety, custom fitted beavertail grip safety, adjustable lightweight aluminum match trigger, full length guide rod w/heavy duty recoil spring & buffer system (buffer system not available in pistols shorter than 5), flat checkered
mainspring housing; tune & polish extractor; deburr pistol internally; carry bevel sharp edges of pistol; machine checker front strap 20LPI (+); check headspace; polish feed ramp
& throat barrel; combat action job w/smoothly tuned 4.5-5.5# trigger pull; Recontour frame and dust cover to 2002 specs; front cocking serrations; Armory Kote finish, satin finish,
stainless steel, or carbon models. Additional charge of $75 to add Springfield Inc. 2 piece mag well, matched to bevel on frame of pistol.
**Upgrade your 2000 or newer Springfield Loaded model to TRP specifications for $695. (GI and Mil-Spec Models are not "Loaded")
Additional charge of $95 to add Springfield Inc. 2 piece mag well, matched to bevel on frame.
Install Novak low mount rear sight, dovetail front sight, 3-Dot tritium night sights, lightweight aluminum speed trigger, extended ambidextrous thumb safety, flat checkered main
spring housing, beavertail grip safety, delta hammer, cocobolo grips, carry bevel all sharp edges of pistol, deburr pistol internally, tune extractor & ejector, recut barrel throat and
polish feed ramp, titanium firing pin with heavy duty firing pin spring, tune trigger to 4.5lb pull, parkerize of blue frame, slide & small parts as needed.
1911-A1 Defense Package
Deburr complete pistol internally; tune extractor & ejector; recut barrel throat and polish feed ramp; check barrel bushing fit (in 5 non-ported
pistols only); check headspace; install heavy duty recoil spring & buffer system (buffer system in 5 & 6 pistols only); smoothly tuned 4.5# trigger pull.
1911-A1 Tech Inspection
Have your 1911-A1 pistol checked by custom technicians for proper function. (Replacement of parts at additional charge.)
Customer will be contacted with recommendations and any additional charges before work is done to the pistol.
$695.00
$175.00
$75.00
1911-A1 Sights:
Install Springfield Custom fully adjustable rear sight, dovetail front sight, w/3 dot tritium inserts........................................................................................ $275.00
Install Springfield Custom fully adjustable rear sight w/2 dot tritium inserts, in existing Bomar cut in slide.......................................................................... $110.00
Install Bomar fully adjustable rear sight, forward mount, protected..................................................................................................................................... $180.00
Install Bomar BMC low mount rear sights (does not include front sight)............................................................................................................................... $160.00
Install Bomar BMC low mount rear sight, deluxe cut (does not include front sight)............................................................................................................... $180.00
Install Bomar BMC low mount rear sight, dovetail front sight, standard cut, with bar/dot tritium inserts............................................................................... $295.00
Install SA fully adjustable rear site, dovetail front site......................................................................................................................................................... $160.00
Install Novak low mount carry sights (Includes fixed rear, dovetail front)............................................................................................................................ $165.00
Install Heinie low mount carry sights (Includes fixed rear, dovetail front)............................................................................................................................ $165.00
Install Novak low mount carry sights w/3 dot or bar/dot tritium inserts (Includes fixed rear, dovetail front)........................................................................ $240.00
Install Heinie low mount carry sights w/Straight 8 tritium inserts (includes fixed rear, dovetail front)............................................................................... $240.00
Install MMC adjustable sights.............................................................................................................................................................................................. $225.00
Install MMC adjustable sights w/tritium inserts................................................................................................................................................................... $300.00
Install MMC adjustable sights in existing Novak sight cuts in slide........................................................................................................................................ $175.00
Install 3 dot tritium inserts in existing Novak sight cuts....................................................................................................................................................... $125.00
Install tritium inserts in existing rear Novak sight; dovetail front sight w/tritium insert........................................................................................................ $150.00
Install dovetail front sight (Any style, includes cold bluing of sight cut)............................................................................................................................... $ 50.00
Install dovetail front sight w/dot tritium insert (Any style, includes cold bluing of sight cut)................................................................................................. $ 75.00
Install fiber optic front sight (dovetail)............................................................................................................................................................................... $ 65.00
Install Aristocrat tri set sight set or Aristocrat rib................................................................................................................................................................. $275.00
1911-A1 Barrels & Accuracy:
Fit slide to frame (tighten); parkerizing or bluing included.................................................................................................................................................. $175.00
Fit match barrel & bushing (.45ACP, non-supported chamber).............................................................................................................................................. $265.00
Fit match fully supported chamber barrel & bushing........................................................................................................................................................... $375.00
Fit match bull barrel to Compact or Champion length pistol.................................................................................................................................................. $375.00
Fit match bushing only to barrel & slide (5 pistols only)..................................................................................................................................................... $ 50.00
Modify frame for ramped & supported barrel......................................................................................................................................................................$ 80.00
Fit & install custom cone style compensator & match barrel (Includes rebluing or parkerizing as necessary)......................................................................... $600.00
As above, except barrels with supported chambers.............................................................................................................................................................. $750.00
Fit & install custom bushing style compensator & match barrel (Includes rebluing or parkerizing as necessary)..................................................................... $600.00
As above, except barrels with supported chambers.............................................................................................................................................................. $750.00
Safeties; Mag Releases; Mag Wells:
Fit extended style ambidextrous thumb safety.................................................................................................................................................................... $ 95.00
Fit extended style thumb safety, not ambidextrous............................................................................................................................................................. $ 65.00
Install SI beavertail grip safety........................................................................................................................................................................................... $ 90.00
Install extended magazine release button........................................................................................................................................................................... $ 35.00
Install ambidextrous magazine release .............................................................................................................................................................................. $100.00
Bevel & polish magazine well............................................................................................................................................................................................. $ 50.00
Install flat checkered mainspring housing........................................................................................................................................................................... $ 65.00
Install SI mag well to match bevel on frame of pistol (2 piece magwell).............................................................................................................................. $120.00
Install S&A mag well to match bevel on frame of pistol (1 piece magwell)........................................................................................................................... $165.00
Weld-on style magazine well installed................................................................................................................................................................................. $150.00
Weld-on style magazine well opened to maximum diameter................................................................................................................................................ $200.00
Install Heine magazine well................................................................................................................................................................................................ $250.00
Add lanyard loop to existing mainspring housing................................................................................................................................................................$ 65.00
Triggers; Trigger Work:
Match trigger installed (speed, long match, or short match)................................................................................................................................................ $ 45.00
Action job, series 70 pistols (4 lb. pull or greater)............................................................................................................................................................... $ 75.00
Action job, series 80 pistols (4 lb. pull or greater)............................................................................................................................................................... $ 95.00
Action job, with SI match tool steel hammer & sear (Required for trigger pull less than 4 lb.).............................................................................................. $195.00
Internal tuning:
Tune extractor (labor only)................................................................................................................................................................................................ $ 25.00
Polish feed ramp & throat barrel........................................................................................................................................................................................ $ 45.00
Deburr pistol internally....................................................................................................................................................................................................... $ 45.00
Bevel & polish magazine well............................................................................................................................................................................................. $ 45.00
Install full length guide rod................................................................................................................................................................................................ $ 45.00
External modifications: Refinishing done at additional charge. Stainless steel 1911-A1s, additional 15% charge.
Hand checker front strap 20LPI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $175.00
Hand checker front strap 25LPI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $200.00
Hand checker front strap 30LPI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $225.00
Machine checker front strap 20 LPI (single stack models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . **$100.00
Machine checker front strap 25LPI (single stack models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $110.00
Machine checker front strap 30 LPI (single stack models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . **$125.00
Checker underneath trigger guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 65.00
Checker front of trigger guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 85.00
Checker rear of slide (30LPI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 75.00
Checker rear of slide (40LPI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 85.00
Checker rear of slide (50LPI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 95.00
Checker front strap, Springfield wide body frame, 20LPI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $250.00
Checker front strap, Springfield wide body frame, 30LPI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $350.00
Serrate rear of slide 40LPI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 65.00
Serrate front strap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 65.00
Serrate top of slide 40LPI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $100.00
Flatten top of slide & serrate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $140.00
Stipple front strap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $100.00
Stipple front strap, Springfield wide body framed pistols (Stippling on each side of existing front serrations) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $150.00
Square style trigger guard, moved forward 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $250.00
Square style trigger guard, w/standard dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $250.00
Machine slide & barrel for ports (Requires installation of cone barrel at additional charge) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $225.00
Undercut front strap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 65.00
Carry bevel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 75.00
Radical carry bevel (Soap bar feel) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $200.00
Front cocking serrations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 90.00
Skeletonize slide for steel loads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $175.00
Lower & flare ejection port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 50.00
Drill & tap frame for any Springfield Custom scope mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 65.00
Recontour front strap to 2002 specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 65.00
Recontour dust cover to 2002 specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 65.00
Refinishing Services:
Blue complete pistol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $120.00
Blue slide & small parts only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 60.00
Blue frame & small parts only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 60.00
Parkerize complete pistol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 70.00
Parkerize slide & small parts only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 40.00
Parkerize frame & small parts only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 40.00
Black T finish complete pistol (Matte black or NATO green) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $175.00
Black T finish slide & small parts only (Matte black or NATO green) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 90.00
Black T finish frame & small parts only (Matte black or NATO green) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $120.00
Armory Kote finish complete pistol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $125.00
Armory Kote finish slide & small parts only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 70.00
Armory Kote finish frame & small parts only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 70.00
Nickel Teflon finish . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $250.00
Hard chrome complete pistol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $250.00
Hard chrome slide & small parts only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $150.00
Hard chrome frame & small parts only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $175.00
Strip chrome from complete pistol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 65.00
Strip chrome from slide & small parts only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 35.00
Strip chrome from frame & small parts only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 35.00
Annodize alloy frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $175.00
Satin (matte) finish stainless steel pistol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 90.00
Black finish stainless steel pistol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $175.00
CUSTOM XD PACKAGES
(On Customer Supplied Pistols)
XD CARRY PACKAGE:
$ 195.00
Combat action job; overtravel adjustment added to trigger; Springfield Custom 3 dot tritium night sights (red front, green
rear); inspect entire pistol; test fire.
Above package w/Trijicon tritium night sights
$ 200.00
Above package w/Heinie or XS tritium night sights
$ 215.00
Other sight and finish options available. Call Springfield Custom for pricing on specific requests.
XD PRODUCTION PACKAGE:
Competition action job; reduced overtravel & reset; Dawson adjustable fiber optic sights;
Springfield Custom match grade barrel; inspect & test fire.
Above package w/BarSto match barrel installed
Above package w/Dawson tritium 3 dot night sights
Other sight & finish options available. Call Springfield Custom for pricing on specific requests.
$ 525.00
extended mag release;
$625.00
$580.00
We will work on any quality 1911-A1 style or XD pistol. We reserve the right to refuse to work on any pistol determined to
be of inferior quality or made unserviceable by any work performed by any other person.
We use your pistol as collateral while the custom work is being completed; so no deposit is required.
Parts installed will match finish of pistol unless otherwise specified by customer.
Please remove all items not necessary for the custom work; for example gun rugs, bushing wrenches, etc.
Please DO SEND any magazine and/or specific ammunition that will be used in the pistol.
Payment may be made by Visa, MasterCard, Discover, American Express, cashiers check, money order, or personal check.
(Custom work or complete pistols, which are paid by personal check, may be held up to 21 days before shipment of the
firearm.)
All work order changes on complete pistols or upgrades will be assessed a charge of $25 per change and could delay delivery
of the handgun. All change requests, for custom work or complete custom pistols, must be submitted in writing and be
signed and dated by the customer.
Return shipping and handling is not included in Springfield Custom pricing. An additional charge of $25 will be made to the
order for return shipping by Federal Express overnight shipment of the firearm.
We recommend shipping to Springfield Custom by an insured shipper, such as UPS or Fed Ex. Ship to: Springfield
Custom, 420 West Main St., Geneseo, IL 61254. Your custom work will not be scheduled until we have received the
firearm and a signed work order form.
Due to Federal government regulations, customers firearms must be return shipped to the address from which they have
been received. (If you have a change of home address during the time your pistol is in the shop, Springfield Custom must
receive a written request with the new address, serial number of the pistol, return authorization number, and customers
signature.)
Estimated completion times are just estimates. Due to scheduling, work flow, and other events beyond our control, these
estimates are subject to change. We will do our best to quote you a reasonable time frame for completion of your custom
pistol or work.
I have read, understand, and agree to the Custom Gun Work Terms, in the Springfield Custom Shop Price List,
and understand that any delivery estimated is strictly an approximate delivery time and can vary considerably
due to factors out of our control. Having read and understood the above terms, I authorize Springfield Custom
to perform the specified work on my handgun.
Name:
Signature:
Address:
City/State/Zip:
Home Phone No:
Work Phone No:
Mobile Phone No:
Credit Card No:
Credit Card Expiration Date:
Credit Card CID No:
Serial Number of Pistol:
E-Mail Address:
Photocopy as needed. One custom worksheet required for each pistol shipped for upgrade. Prices subject to change without notice. Mark custom package and/or
individual work requested to be done to your 1911-A1 or XD pistol, and enclose completed worksheet in package with the pistol.
SPRINGFIELD CUSTOM