Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
L & T, Indias largest manufacturer of low tension switch gear, introduces Motor Protection Circuit Breakers (MPCBs) for comprehensive protection and control of low tension motors. MPCBs combine the function of a switch, a short circuit protective device and an overload relay. Designed to international standards, their compact size offers OEMs and panel builders multiple advantages in installation and operation. These MPCBs are also provided with a large number of accessories for various applications.
The design features offer a range of advantages : Compact size saves panel space. Ambient temperature compensation eliminates need for constant current-setting re-adjustment. Double slide mechanism ensures faster tripping during single phasing in the circuit. Technical data of circuit breaker can be read easily when circuit breaker is in mounted position. Unambiguous front ON/O.. indication. Similar design concept for both circuit breakers facilitates handling. Identical accessories reduce stock levels. In-built DIN rail mounting facility makes it suitable for snap fit mounting on 35mm section rail.
11
11/1
APPLICATIONS
APPLICATION O. MPCBs :
STAND-ALONE MOTOR PROTECTION
Highly compact and technically superior MG1 and MG2 can be used for electrical control and protection solutions by OEMs. They can be used for switching, control and protection of motor in machine with single motor and not requiring remote switching. MPCBs can be used in machine incorporating multiple motors as incomers as well as for protection and control of individual motor.
PLANT PROTECTION
MG1 and MG2 can be used for plant protection. MG1 has a setting upto 25A & MG2 upto 63A for plant protection.
DC SWITCHING
The MPCBs Type MG1 & MG2 are also suitable for DC switching.
.USE MONITORING
Operation of fuse can be monitored with MG-.1 (Refer Sketch). When the fuse blows, the current flows through the breaker, causing tripping. Voltages available AC : 24V to 690V 50/60 Hz DC : 24V to 250V .or DC voltage greater than 250V to 600V, the 3 conducting paths of the breaker must be connected in series.
11
11
11/3
for MG 1 & MG 2
ST24503
OOOO
230V, 50Hz 415V, 50Hz 24V, 50Hz 230V, 50Hz 415V, 50Hz DC 110-240V
11
11/4
TECHNICAL DATA
TECHNICAL DATA : MPCB TYPE MG1 & MG2
Standards Number of poles Max. rated current, ln (max. rated operational current, le) Plant protection Motor protection Permissible ambient temperature at full rated current in storage Rated operational voltage, Ue Rated frequency Rated insulation voltage, Ui Utilization category to IEC 947-2 (circuit breaker) to IEC 947-4-1 (motor starters) Rated short circuit breaking capacity, Icu/Ics DC short circuit breaking capacity DC 125V DC 150V DC 250V DC 300V DC 375V DC 450V Shock resistance Mechanical endurance Temperature compensation Suitability for Isolation Rated impulse withstand voltage, Uimp Phase failure sensitivity Terminal Capacity Cross-sections for main conductors Solid or Stranded mm2 2 x (1 to 6) 1 x 1.5 to 2 x 16 or 1 x 25 + 1 x 10 to IEC 947-4-1 V 6kV Yes 1pole 1pole 2pole in series 2pole in series 3pole in series 3pole in series to IEC 68, part 2 - 27 upto 25A / 25A upwards to IEC 947-4-1 Time constants for MG1/MG2: t=5ms kA kA kA kA kA kA g op. Cyls 10 10 10 25 100 000 Yes Yes 8kV 10 10 10 30 100 000 / 30 000 A AC-3 See Selection Table C C V Hz V -20 to +55 -50 to +80 415 50/60 660 A A 25 25 63 52 IEC 947-1; IEC 947-2; IEC 947-4-1 MG1 3 MG2 3
11
11/5
ACCESSORIES
Standards Limiter for MG 1 Rated short-circuit breaking capacity when connected in series with MG1 upto AC 415V kA Rated operational voltage, Ue Rated frequency Max. rated current, ln Stand alone Stand alone Adjacent Adjacent Mechanical endurance Auxiliary contacts Rated operational current, le 230V 400V 500V Utilization category Terminal Capacity, Solid or Stranded Under voltage release Power consumption pickup holdon Tripping voltage tripping pickup Max. opening time Shunt trip Power consumption during pickup Max. permissible command duration Tripping voltage Max. opening time VA / W S V ms 10/6 0.7 to 1.1 x Us 20 65/57 5 0.7 to 1.1 x Us 20 VA / W VA / W V V ms 10/6 4.2/2 0.7 to 0.35 x Us 0.85 to 1.1 x Us 20 mm2 A A A 3 1.5 1 AC - 15 1 x 0.5 to 2 x 2.5 3 1.5 1 upto 30C upto 55C upto 30C upto 55C A A A A op. Cyls 63 56 56 50 100 000 kA V Hz 50 415 50/60 IEC 947-1; IEC 947-2; IEC 947-4-1 MG1 MG2
11
11/6
11
11/7
11
11/8
OVERALL DIMENSIONS
11
35 mm Standard Mounting Rail *Minimum clearance to adjacent parts and uninsulated live parts
MG1
Note: All dimensions are in mm.
11/9
OVERALL DIMENSIONS
11
35 mm Standard Mounting Rail *Minimum clearance to adjacent parts and uninsulated live parts
MG2
Note: All dimensions are in mm.
11/10