Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Renewal Parts
Model 501FD2
Gas Turbine
Supplied to:
Calpine Corporation
Mankato Unit 1
Serial Number:
37A8387-1
This catalog represents the unit/element configuration as of the date shown above. Any
changes to the customer's unit/element after this date will not be reflected. Contact your
Siemens Power Generation, Inc., Customer Service Representative for a catalog update.
This document contains information proprietary to Siemens Power Generation, Inc. Your
acceptance of it is an acknowledgment of a confidential relationship between you and
Siemens Power Generation, Inc. It is to be used solely by you for the purpose of
operating and maintaining power generating equipment supplied by Siemens Power
Generation, Inc. and is to be returned or destroyed when no longer required for that
purpose. Neither this document nor any information obtained therefrom is to be
reproduced, transmitted, disclosed or used otherwise in whole or part without the
written authorization of Siemens Power Generation, Inc.
The terms and conditions set forth in the Siemens quotation and in this Selling Policy 1270 are the terms and conditions governing the Sie-
mens offer. Each offer is valid for 60 days from the date of the offer unless extended, modified or withdrawn in writing by Siemens. The return
of a purchase order or any other reasonable manner of acceptance communicated to Siemens during such validity period will be sufficient to
form an Agreement on the terms and conditions of the Siemens offer including the terms and conditions of this Selling Policy 1270.
1. Definitions filiated company and their subsidiaries, L. “Hazardous Material” shall mean any
Whenever used in this document with initial successors and assigns. material listed in the “Hazardous Mate-
capitalization, the following definitions shall rial Table” set forth in 49 CFR 172.101
be applicable: G. “Site” shall mean the Purchaser’s facility as amended.
where the Equipment or Purchaser’s
A. “Agreement” or “Contract” shall mean Material will be situated. 2. Scope
the Siemens quotation, this Selling Pol- Siemens will furnish to Purchaser Equip-
icy 1270 and Purchaser’s purchase or- H. “Software” shall mean instructions in ment, Shop Repair and Modernization, or
der (excluding any preprinted terms and machine readable form, other than Technical Services, as specified in and pur-
conditions on said purchase order and in source code, and associated documen- suant to the Agreement.
any attachment or attachments to said tation delivered by Siemens to Pur-
purchase order) or other document evi- chaser in chip, disc and/or tape format. 3. Price Policy
dencing acceptance of the Siemens of- Unless otherwise stated in the offer, the
I. “Supplier” shall mean any subcontractor price does not include disassembly and
fer as set forth in the quotation; or an in- or supplier of any tier who supplies
tegrated agreement signed by Siemens reassembly of Equipment at the Site.
goods and services to Siemens in con-
and Purchaser; for Equipment, Shop nection with the obligations of Siemens Prices are firm for (i) Equipment with a
Repair and Modernization, and Techni- under the Agreement. scheduled shipment date of sixty (60) weeks
cal Services, or one or more of them. or less from the date of the Agreement and
J. “Technical Services” shall mean (i) in- (ii) Shop Repair and Modernization, and
B. “Equipment” shall mean equipment, spections, technical evaluation of in-
components, parts, materials and Soft- Technical Services which are scheduled to
spections, technical analysis of materi- be performed within sixty (60) weeks from
ware provided by Siemens pursuant to als and technical recommendations re-
the Agreement. the date of the Agreement.
lated to Shop Repair and Moderniza-
C. “Purchaser” shall mean the entity pur- tion, (ii) technical information provided For (i) Equipment with a scheduled shipment
chasing Equipment, Shop Repair and by Siemens including data interpreta- date in excess of sixty (60) weeks and (ii)
Modernization, and Technical Services, tion and reports, (iii) advice and consul- Shop Repair and Modernization, and Tech-
or one or more of them, as well as any tation given to Purchaser’s personnel nical Services scheduled to be completed
other owners of the power generation at Purchaser’s facility or at a Siemens beyond sixty (60) weeks from the date of the
facility where the Equipment or Pur- facility by a Siemens engineer or tech- Agreement, the prices are subject to ad-
chaser’s Material will be situated. nician or (iv) advice and guidance justment upward or downward for changes
given to Purchaser by the Siemens in labor and material indexes. This adjust-
D. “Purchaser’s Material” shall mean field engineer(s) regarding methods ment shall be determined in accordance with
equipment, materials, components and and procedures for installation of Price Adjustment Policy 1270-1.
items of any kind owned by Purchaser Equipment or Purchaser’s Material and
for which Siemens is to provide Tech- for periodic maintenance and calibra- 4. Terms of Payment
nical Services under the Agreement or tion of Equipment or Purchaser’s Mate- A. For Agreements covering Equipment or
on which Siemens is to perform Shop rial when the scope of work under the Shop Repair and Modernization, or both
Repair and Modernization under the Agreement specifically provides for of them, with a total price of $100,000 or
Agreement, or both of them. such services. less, the terms of payment are net thirty
(30) days from date of invoice. The in-
E. “Shop Repair and Modernization” shall K. “Third Party Parts” shall mean parts, voice will be issued on the date of ship-
mean work performed by Siemens on components, equipment or materials ment. Where partial shipments are
Purchaser’s Material at a Siemens provided by Purchaser or that exist in made, pro rata invoices will be issued on
manufacturing plant, a Siemens service the Purchaser’s Material which were the date of each partial shipment.
facility or a suitable facility selected by not manufactured or supplied by Sie-
Siemens. mens or which were originally supplied B. For Agreements covering Equipment or
by Siemens and subsequently repaired, Shop Repair and Modernization, or both
F. “Siemens” shall mean Siemens Power serviced or otherwise altered by any of them, with a total price in excess of
Generation, Inc. (f/k/a Siemens West- party not affiliated with Siemens. $100,000, the terms of payment are as
inghouse Power Corporation) or an af- set forth below:
Page No. 1
Selling Policy
1270
(1) twenty percent (20%) of the total cable) forgiveness of certain net above, due thirty (30) days after said
price (as adjusted in accordance with price increases as provided above resolution.
the provisions of Price Adjustment shall constitute complete fulfillment
Policy 1270-1 when adjustment is of all liabilities of Siemens to Pur- 5. Delivery, Title and Risk of Loss or
applicable) will be invoiced upon the chaser for delay in shipment whether Damage
effective date of the Agreement, and based in contract, tort (including neg- Delivery of each component of Equipment
ligence and strict liability), or other- shall be made when said component is
(2) progressive payments beginning at wise. placed Free On Board carrier at the manu-
the start of work in the amount of facturing plant. Subject to the provisions of
seventy-five percent (75%) of the to- C. For Agreements covering Technical the immediately following paragraph, legal
tal price (as adjusted in accordance Services, terms of payment are net and equitable title and risk of loss or dam-
with the provisions of Price Adjust- within thirty (30) days from date of in- age to each such component of the Equip-
ment Policy 1270-1 when adjustment voice. Invoices will be issued on the fif- ment shall pass from Siemens to Purchaser
is applicable) will be invoiced in teenth (15th) day of each month cover- upon Delivery.
equal monthly installments com- ing the Technical Services performed in
mencing thirty (30) days after issu- the previous month. Title to and right of possession of any Soft-
ance of the twenty percent (20%) in- ware licensed hereunder, without legal
voice detailed in (1) above and ex- D. In any instance where Purchaser is process, shall remain with Siemens or its
tending to the first day of the month unable to return components to Siemens licensor, except that Purchaser shall have
which includes the day of scheduled for fitting or for coordination with other the right of possession and use of the Soft-
shipment, and assemblies by the specific date agreed ware provided hereunder for the terms of the
to in the Agreement, Siemens reserves corresponding license provided herein, so
(3) five percent (5%) of the price of each the right to invoice Purchaser for work long as no breach of this Agreement has
item (as adjusted in accordance with performed to date and either ship the been made by Purchaser and all payments
the provisions of Price Adjustment components to Purchaser in their exist- due to Siemens have been paid. Nothing in
Policy 1270-1 when adjustment is ing state or hold the components in stor- this agreement shall be construed as giving
applicable) will be invoiced upon age at Purchaser’s risk and expense. Purchaser any right to sell, assign, lease or
shipment of that item. That portion of the work which is to be in any other manner transfer or encumber
performed by Siemens at a later date Siemens’ or its licensor’s ownership of the
(4) Payment of each invoice is to be will be performed as a Purchaser re- Software, or as limiting Siemens or its licen-
made within thirty (30) days of its quested change under Article 19 - sor from using and licensing the Software to
date. Changes. any third party.
(5) If the price of any portion of the work E. If shipments are delayed by Purchaser, Purchaser’s Material sent to Siemens for
covered by the Agreement is revised then affected payments shall become Shop Repair and Modernization or Pur-
in accordance with the provisions set due based on the date Siemens is pre- chaser’s Material or Equipment being re-
forth herein, then invoicing will be pared to make shipment. turned pursuant to the provisions of the
made according to the terms set forth Warranty or Patents Articles of the Agree-
above by determining the accumu- F. Any past due amounts shall, without ment will be delivered by Purchaser at its
lated percentage of the price due prejudice to the right of Siemens to pay- expense to the repair or manufacturing plant
times the revised price and subtract- ment when due, bear interest at a float- designated by Siemens where the work is to
ing the sum of the payments previ- ing rate equivalent to one-twelfth (1/12) be performed. Title to such Equipment or
ously made. of the per annum prime rate charged by Purchaser’s Material will remain at all times
Chase Manhattan Bank, New York, New with Purchaser. Risk of loss or damage to
(6) If shipment (from the manufacturing York, U.S.A., as such prime rate is pub-
plant or repair facility where the work such Equipment or Purchaser’s Material will
lished on the first banking day following transfer to Siemens upon its arrival on board
is performed) of an item is delayed the date payment is due, plus an addi-
for causes which are within the rea- the carrier at the repair or manufacturing
tional one-half of one percent (0.5%), plant and will transfer back to Purchaser
sonable control of Siemens, then is- payable each month or portion thereof
suance of the invoice covering the fi- upon its delivery to the carrier at the repair
that payment is delayed. If payments are or manufacturing plant after the work is per-
nal five percent (5%) payment de- not made when due, then Siemens may,
tailed in (3) above will be deferred for formed. Delivery of Purchaser’s Material
upon fifteen (15) days written notice and shall be made when the item is placed Free
twice the number of months by which at its option, suspend all further work
shipment of that item is delayed. Fur- On Board carrier at the repair or manufactur-
hereunder. Resumption of work thereaf- ing plant after the work is performed. When
thermore, where applicable, Pur- ter is contingent upon correction of the
chaser will be excused from the duty repair work is performed by Siemens at the
payments deficiency. The schedule for Site, title and risk of loss or damage to the
to pay any net price increase on the the resumed work will be established by
final five percent (5%) payment of the Equipment, to Purchaser’s Material and to
Siemens based on its then current work other property shall remain at all times with
delayed item resulting from the op- load and the availability of other re-
eration of the provisions of Price Ad- Purchaser.
sources. All Siemens expenses associ-
justment Policy 1270-1 during the pe- ated with any such suspension shall be 6. Transportation
riod of, and arising solely from, such for the account of Purchaser. A. Transportation and Storage
delay in shipment of said item by When items of Equipment are ready for
Siemens G. If there exists a good faith dispute over shipment or Shop Repair and Moderni-
the amounts to be paid and provided zation is completed on Purchaser’s Ma-
THE REMEDIES OF PURCHASER that Purchaser has notified Siemens in
SET FORTH ABOVE FOR DELAY terial, Siemens will (i) in the absence of
writing that such dispute exists, then shipping instructions, inform Purchaser
IN SHIPMENT CAUSED BY SIE- Purchaser shall pay the undisputed
MENS ARE EXCLUSIVE AND NO of pending shipment and Purchaser will
amount. Thereafter, the disputed portion thereafter promptly give shipping instruc-
OTHER REMEDIES OF ANY KIND may be held in abeyance until resolution
WHATSOEVER SHALL APPLY. De- tions to Siemens; (ii) determine the
of the matter with that portion, together method of transportation and the routing
ferral in issuance of the final five per- with the interest charge specified in F
cent (5%) invoice and (where appli- of the shipment and; (iii) ship the
Page No. 2
Selling Policy
1270
Equipment or Purchaser’s Material nation is outside the United States or is will be free of defects in workmanship
freight prepaid and included in the price in Alaska or Hawaii. and materials until one (1) year from the
by Normal Carriage: date of shipment of the original item of
C. Special Transportation and Services Purchaser’s Material that has undergone
(1) to Purchaser’s designated destina- Purchaser agrees to pay or to reimburse Shop Repair and Modernization (the
tion when shipped by highway trans- any transportation charges in excess of “Shop Repair and Modernization War-
port, or regular charges for Normal Carriage, in- ranty Period”).
cluding, but not limited to, excess
(2) to the rail siding nearest Purchaser’s charges for special routing, special If during the Shop Repair and Moderni-
designated destination when shipped trains, specialized riggers trailers, zation Warranty Period, Siemens is
by rail transport. lighterage, barging and air transport. promptly notified in writing that the Work
In the event that Purchaser fails to pro- fails to conform to the Shop Repair and
Purchaser also agrees to pay or to reim- Modernization Warranty, then Siemens
vide Siemens with timely shipping in- burse any cost incurred or charge result-
structions, Siemens will ship the Equip- will at its option and expense correct
ing from special services performed in such nonconformity by repair or re-
ment or Purchaser’s Material by Normal connection with the transportation of the
Carriage to Purchaser or to a suitable placement of the defective portion of the
Equipment or Purchaser’s Material, in- Work. If repair or replacement is imprac-
storage location selected by Siemens. cluding, but not limited to, the construc- ticable, then Siemens will refund the
If the Equipment or Purchaser’s Material tion and repair of transportation and amount of the compensation paid to
is to be placed into storage in accor- handling facilities, bridges and road- Siemens by Purchaser for such noncon-
dance with the above, then delivery of ways, of whatever kind and wherever lo- forming portion of the Work.
the Equipment or Purchaser’s Material cated.
shall be deemed to have occurred for all D. Technical Services Warranty and Exclu-
7. Warranty sive Remedy
purposes hereunder at the time the A. Equipment Warranty and Exclusive
Equipment or Purchaser’s Material is Siemens warrants for each item of
Remedy (excluding Software) Technical Services that (i) the advice,
placed on the carrier for shipment to the Siemens warrants that the Equipment
storage location. If it is to be stored in recommendations and performance of
(excluding Software) furnished to Pur- its personnel will reflect competent pro-
the facility where manufactured, or chaser, including any part repaired or
where Shop Repair and Modernization is fessional knowledge and judgment and
replaced by Siemens during the Equip- (ii) the technical information, reports and
performed, then delivery shall be ment Warranty Period, will be free of de-
deemed to have occurred when the analyses transmitted by Siemens in
fects in workmanship and materials until connection therewith will reflect compe-
Equipment or Purchaser’s Material (i) is one (1) year from the date of shipment of
placed Free On Board the common car- tent professional knowledge and judg-
the original Equipment (excluding Soft- ment, beginning with the start of the item
rier for shipment to the storage location ware) to Purchaser (the “Equipment
or (ii) is placed into the storage location of Technical Services and ending one
Warranty Period”). (1) year after completion of said item of
when stored in a Siemens manufactur-
ing facility. If during the Equipment Warranty Period Technical Services by Siemens (herein-
Siemens is promptly notified in writing after the “Technical Services Warranty
In the event of storage pursuant to the that the Equipment (excluding Software) Period”).
preceding paragraph, all expenses fails to conform to the Equipment War-
thereby incurred by Siemens, such as If during the Technical Services War-
ranty, then Siemens will at its option and ranty Period Siemens is promptly noti-
preparation for and placement into stor- expense correct such nonconformity by
age, handling, freight, storage, inspec- fied in writing that any portion of the
repair or replacement. Technical Services fails to conform to
tion, preservation, taxes and insurance,
shall be payable by Purchaser upon B. Software Warranty and Exclusive Rem- the Technical Services Warranty, then
submission of an invoice(s) prepared by edy Siemens will promptly reperform such
Siemens. When conditions permit and If Equipment includes Software, then nonconforming portion of the Technical
upon payment to Siemens of any addi- Siemens also warrants that the Software Services. If reperformance is impracti-
tional amounts due hereunder, Pur- will be free of errors which materially af- cable, then Siemens will refund the
chaser shall arrange, at its expense, for fect its utility until one (1) year from the amount of the compensation paid to
removing the Equipment or Purchaser’s date of shipment of the Software to Pur- Siemens for such nonconforming portion
Material from storage. chaser. If during this warranty period, of the Technical Services.
Siemens is promptly notified in writing E. Title
B. Normal Carriage that the Software fails to conform to its
Most Equipment and Purchaser’s Mate- Siemens warrants that the Equipment,
warranty, then Siemens will at its option when delivered, shall not be subject to
rial can be shipped by highway trans- and expense correct the nonconformity
port. Siemens shall make every reason- any encumbrances, liens, security inter-
by correction in the medium originally ests, or other defects in title. In the event
able effort to ship by highway transport supplied or by providing a procedure to
unless rail transport is requested by of any failure to conform to this warranty,
correct material errors. Third party Soft- Siemens, upon prompt written notice of
Purchaser. Normal Carriage means car- ware shall be warranted on a pass
riage either by highway transport (pro- such failure, shall defend the title to the
through basis in the same manner and Equipment.
vided this does not necessitate use of for the same period and extent provided
specialized riggers trailers) or by rail to Siemens by the firm which supplied F. Warranty Conditions
transport, on normal routing from the re- said third party software. The warranties and remedies set forth in
pair facility or factory to (i) Purchaser’s this Article 7 - Warranty are conditioned
designated destination when shipped by C. Shop Repair and Modernization War- upon:
highway transport, (ii) the rail siding ranty and Exclusive Remedy
nearest Purchaser’s designated destina- Siemens warrants that the work per- (1) Purchaser’s receipt, handling, stor-
tion when shipped by rail transport or (iii) formed by Siemens on Purchaser’s Ma- age and maintenance during any
the port of export selected by Siemens in terial, including any materials supplied storage, installation, testing, opera-
the forty-eight (48) continental United by Siemens in connection therewith tion and maintenance, including
States if Purchaser’s designated desti- (hereinafter referred to as the “Work”), tasks incident thereto, of the Equip-
Page No. 3
Selling Policy
1270
ment, Purchaser’s Material or Pur- G. Additional Conditions Applicable to the PRESS OR IMPLIED (INCLUDING
chaser’s equipment for which Sie- Sale of Monitoring Devices ALL WARRANTIES OF MER-
mens has provided Technical Ser- Monitoring devices supplied by Siemens CHANTABILITY AND FITNESS
vices, in accordance with the rec- pursuant to the Agreement, such as but FOR A PARTICULAR PURPOSE,
ommendations of Siemens to the ex- not limited to, monitors for generator AND ALL WARRANTIES ARISING
tent applicable or, in the absence of condition and for steam chemistry, are FROM COURSE OF DEALING OR
such recommendations or to the ex- intended to enhance the availability and USAGE OF TRADE), OR OTHER-
tent not applicable, in accordance reliability of turbine generators. These WISE, FOR OR WITH RESPECT
with the generally accepted practices monitors normally represent state-of-the- TO THIRD PARTY PARTS OR
of the United States electric power art technology which enables users to SERVICES ON THIRD PARTY
industry. In addition, such Equip- better diagnose and control conditions PARTS.
ment, Purchaser’s Material or Pur- within the turbine generator. While such
chaser’s equipment shall not have monitors follow conditions and trends J. Exclusivity of Warranties and Remedies.
been operated in excess of limita- within the equipment and thereby permit THE WARRANTIES PROVIDED BY
tions specified in writing by Siemens earlier detection of harmful conditions, SIEMENS AS SET FORTH IN THIS
and not have been subjected to ac- Siemens does not warrant or represent ARTICLE ARE EXCLUSIVE AND ARE
cident, alteration, abuse or misuse; that use of such monitors will prevent IN LIEU OF ALL OTHER WARRANTIES
and failure or detect all harmful conditions in WHETHER STATUTORY, EXPRESS,
the turbine generator and Purchaser ac- OR IMPLIED (INCLUDING ALL WAR-
(2) For all warranty work, where disas- knowledges the same. RANTIES OF MERCHANTABILITY AND
sembly, removal, replacement and FITNESS FOR A PARTICULAR PUR-
reinstallation of equipment, materi- H. Additional Conditions Applicable to Di- POSE, AND ALL WARRANTIES ARIS-
als, structures or Purchaser’s Mate- agnostic and Non-Destructive Examina- ING FROM COURSE OF DEALING OR
rial was not part of the Siemens tion and Testing USAGE OF TRADE). Correction of non-
scope of work under the Agreement; Diagnostic and non-destructive exami- conformities in the manner and for the
Purchaser providing, without cost to nation and testing techniques employed period of time provided above shall con-
Siemens, access to the nonconform- by Siemens represent the current Sie- stitute Siemens’ sole liability and Pur-
ity by disassembling, removing, re- mens techniques for detecting defects in chaser’s exclusive remedy for defective
placing and reinstalling any equip- (including indications of cracking) and or nonconforming Equipment, Software,
ment, materials, structures or Pur- evaluation of the condition of Pur- Shop Repair and Modernization or
chaser’s Material to the extent nec- chaser’s Material. However even these Technical Services whether claims of
essary to permit Siemens to perform current techniques, when performed ac- the Purchaser are based in contract, in
its warranty obligations. cording to the standards detailed above tort (including negligence and strict liabil-
in this warranty provision, may not detect ity), or otherwise.
(3) All warranty work being performed all of the defects in Purchaser’s Material
on a single-shift straight-time basis, (including indications of cracking) and 8. Taxes
Monday through Friday. In the event shall not constitute a breach by Siemens The price paid or to be paid to Siemens
Purchaser requests correction of of its warranty obligations. Purchaser under the Agreement does not include any
warranty items on an overtime or acknowledges that Siemens will not be federal (other than federal income taxes
multiple shift schedule, the premium responsible for the consequences of un- imposed on Siemens), state, or local prop-
portion of such overtime or multiple detected defects including undetected erty, license, privilege, sales, use, excise,
shift shall be to Purchaser’s account. cracks. value added, gross receipts, or similar taxes
now or hereafter applicable to, measured by,
(4) Purchaser, without cost to Siemens, I. Purchaser Supplied Third Party Parts or imposed upon or with respect to the
making its Site facilities and person- and Materials transaction, the property, its sale, its value
nel (to the extent consistent with or its use, or any services performed in con-
personnel job classifications) avail- (1) Purchaser warrants that any and all nection therewith. Purchaser agrees to pay
able to assist Siemens in the per- Third Party Parts which may be the or reimburse Siemens for any such taxes
formance of its warranty obligations. subject of any performance under which Siemens or its Suppliers are required
(5) The Purchaser, with respect to this Agreement shall be (a) fully to pay.
Paragraph 4 above, reimbursing compatible with the corresponding
part, component, equipment or ma- 9. Additional Conditions Applicable to
Siemens for all costs incurred in the Nuclear Installations
transportation of personnel and de- terial of the Original Equipment
Manufacturer (“OEM”) in terms of In the event the Technical Services, the
fective, repaired or replacement Shop Repair and Modernization or the
parts to and from the Site. form, fit, and function; (b) timely pro-
vided to Siemens hereunder; and (c) Equipment provided hereunder is to be per-
(6) The Equipment or Purchaser’s Mate- capable of installation in the same formed or utilized at or in any manner in
rial must be returned with complete manner and within the same time as connection with a nuclear installation, the
identification in accordance with in- the corresponding OEM part, com- following conditions shall apply:
structions furnished by Siemens. In ponent, equipment, or material. A. In the event the Equipment or Pur-
no event will Siemens be responsi- chaser’s Material shall be utilized at or in
ble for Equipment or Purchaser’s (2) Purchaser assumes the entire liabil-
ity and risk arising out of or resulting connection with a nuclear installation,
Material returned without proper au- Purchaser shall at its own cost, prior to
thorization and identification. from Third Party Parts. The warran-
ties and remedies set forth in para- the arrival of nuclear fuel at the Site, se-
Prior to the return of any Equipment graphs A through D above of this Ar- cure and thereafter maintain in force,
or Purchaser’s Material to Siemens, ticle 7 - Warranty do not apply to protection against liability arising out of
the Purchaser must obtain authori- Third Party Parts or performance re- or resulting from a “Nuclear Incident” (as
zation and shipping instructions from lating to Third Party Parts, and SIE- defined in the Atomic Energy Act of
Siemens. Siemens reserves the right MENS DISCLAIMS ANY AND ALL 1954, as amended) as required by the
to reject any Hazardous Material. WARRANTIES AND REMEDIES, Nuclear Regulatory Commission; pro-
WHETHER STATUTORY, EX- vided, however, that if the nuclear liabil-
Page No. 4
Selling Policy
1270
ity protection system in effect on the nation and health physics necessary for, Siemens shall have the right to terminate the
date of the Agreement expires or is re- related to or resulting from the work. Agreement immediately in the event of (a) a
pealed, changed, or modified, Purchaser This includes but is not limited to decon- material breach of the Agreement by the
will, without cost to Siemens, maintain tamination of any Siemens equipment or Purchaser; or (b) Purchaser’s bankruptcy,
liability protection through government tools used in the performance thereof. insolvency, liquidation or similar financial
indemnity, limitation of liability, and/or li- Purchaser shall provide documentation condition. Siemens shall have the right to
ability insurance which will not result in a demonstrating that components or parts suspend performance or, at its option, ter-
material impairment of the protection af- being returned to Siemens after such minate the Agreement for Purchaser’s fail-
forded Siemens and its Suppliers by decontamination meet the requirements ure to make any payment when due, except
such nuclear liability protection system designated for unrestricted release as to the extent that Purchaser has provided a
which is in effect as of the date of the set forth in the United States Code of good faith reason in writing for any such
Agreement, taking into account the Federal Regulations, Title 10, Part 20, failure. In addition, if at any time during the
availability of insurance, customary prac- as amended (10 CFR 20). performance of its work under the Agree-
tice in the United States electric utility ment Siemens reasonably determines that
industry for plants of similar size and 10. Force Majeure the Purchaser's financial condition may
character, and other relevant factors in A. Siemens will not be liable for failure to render it insolvent or unable to make future
light of then existing conditions. In any perform any obligation or delay in per- payments under the Agreement, then Sie-
event, the protection provided pursuant formance resulting from or contributed to mens shall be entitled to one or more of the
to this provision shall remain in effect by any cause beyond the reasonable following at Siemens' option: (i) adequate
until the decommissioning of the nuclear control of Siemens or its Suppliers or written assurances, supported by documen-
plant. from any act of God; act of civil or mili- tation, of Purchaser’s ability to pay; (ii) pay-
tary authority; act of war whether de- ment in advance for any further work; (iii)
B. Neither Siemens nor its Suppliers shall clared or undeclared; act (including de- future payments against an irrevocable Let-
be liable for any loss of, damage to, or lay, failure to act, or priority) of any gov- ter of Credit on terms, and from an issuing
loss of use of property or equipment ernmental authority or Purchaser; act of bank, acceptable to Siemens; (iv) other
wherever located, arising out of or re- terrorism; civil disturbance; insurrection payment security or credit support mutually
sulting from a Nuclear Incident. Pur- or riot; sabotage; fire; inclement weather agreed by Purchaser and Siemens.
chaser waives and, to the extent permit- conditions; earthquake; flood; strike;
ted by its insurers, will require its insur- work stoppage or other labor difficulty; 12. Intellectual Property
ers to waive all rights of recovery against embargo; car shortage; fuel or energy A. Siemens will, at its own expense, defend
Siemens and its Suppliers on account of shortage; major equipment breakdown; or at its option settle any suit or proceed-
any such loss, damage, or loss of use. delay or accident in shipping or transpor- ing brought against Purchaser so far as
All such waivers shall be in a form ac- tation; or failure or delay beyond its rea- based on an allegation that any Techni-
ceptable to Siemens. sonable control in obtaining necessary cal Services, work on Purchaser’s Mate-
manufacturing facilities, labor, or materi- rial, Equipment (including parts thereof),
In the event Purchaser recovers dam- als from usual sources. or use thereof for its intended purpose,
ages from a third party based on losses constitutes an infringement of any
at the plant site resulting from the haz- B. In the event of a delay in performance United States patent, copyright or mis-
ardous properties of source, special nu- excusable under this Article 10 - Force appropriation of a third party’s trade se-
clear or byproduct material (as defined in Majeure, the date of Delivery or time for cret, if Siemens is notified promptly in
the Atomic Energy Act of 1954, as performance of the work will be ex- writing and given authority, information,
amended), Purchaser shall indemnify tended by a period of time reasonably and assistance in a timely manner for
Siemens and its Suppliers against necessary to overcome the effect of the defense of said suit or proceeding.
claims by such third party which are such delay, and Purchaser will reim- Siemens will pay the damages and costs
based on Purchaser’s recovery of such burse Siemens for its additional costs awarded in any suit or proceeding so de-
damages. In addition, Purchaser waives and expenses resulting from the delay. fended. Siemens will not be responsible
and will require its insurers to waive all for any settlement of such suit or pro-
rights of recovery against Siemens and 11. Termination
Purchaser may terminate the Agreement ceeding made without its prior written
its Suppliers, for any and all costs or ex- consent. In case the Technical Services,
penses arising out of or in connection upon thirty (30) days prior written notice to
Siemens and payment of reasonable and work on Purchaser’s Material, the
with the investigation and settlement of Equipment, or any part thereof, as a re-
claims or the defense of suits for dam- proper termination charges. Should the work
be delayed for a period in excess of six (6) sult of any suit or proceeding so de-
age resulting from the nuclear energy fended is held to constitute infringement
hazard. months, at the option of Siemens, the
Agreement may be deemed to have been of any United States patent, copyright or
C. Purchaser will indemnify Siemens and terminated by Purchaser. Termination misappropriation of a third party’s trade
its Suppliers for any liability arising out of charges in either event will include a portion secret, or its use by Purchaser is en-
loss of or damage to property at the Site of the purchase price reflecting the amount joined, Siemens will, at its option and its
which arises out of a Nuclear Incident. In of work performed, man hours expended own expense, either: (a) procure for
addition, Purchaser shall obtain for the and materials acquired at the date of termi- Purchaser the right to continue using the
benefit of Siemens and its Suppliers, nation. These charges will also include the Equipment or Purchaser’s Material; (b)
protection against liability for, arising out expenses associated with the termination, replace it with substantially equivalent
of, or resulting from damage to any including, but not limited to, any additional non-infringing equipment; or (c) modify it
property or equipment located at the Site expense incurred by reason of termination or so it becomes non-infringing.
which is used or intended for use by cancellation of agreements between Sie- B. Siemens will have no duty or obligation
Purchaser in connection with the opera- mens and its Suppliers, and any applicable to Purchaser under this Article 12 - Intel-
tion of the nuclear power plant (including cost allocated in contemplation of perform- lectual Property to the extent that the
but not limited to fuel) and which is ance. Siemens will make every reasonable Technical Services or work on Pur-
owned by parties other than Purchaser. effort to minimize such termination charges. chaser’s Material or Equipment is (a)
All termination charges shall be due and supplied according to Purchaser’s de-
D. Purchaser shall, without cost to Sie- payable thirty (30) days from the date of the
mens, perform any required decontami- sign or instructions wherein compliance
Siemens invoice. therewith has caused Siemens to devi-
Page No. 5
Selling Policy
1270
ate from its normal course of perform- connection therewith. The observing or PUNITIVE DAMAGES WHATSOEVER;
ance, (b) modified by Purchaser or its recording of the work or any part thereof, DAMAGE TO OR LOSS OF PROPERTY
contractors after delivery by Siemens, or whether by photographic, video or audio OR EQUIPMENT; LOSS OF PROFITS OR
(c) combined by Purchaser or its con- devices or in any other manner is prohib- REVENUE; LOSS OF USE OF PUR-
tractors with items not furnished here- ited. In the event any such prohibited CHASER’S MATERIAL, EQUIPMENT OR
under. In addition, if by reason of such observation or recording occurs, Sie- POWER SYSTEM; LOSS OF DATA; IN-
design, instruction, modification or com- mens may (in addition to any other legal CREASED COSTS OF ANY KIND, INCLUD-
bination, a suit, claim or proceeding is or equitable rights and remedies) stop ING BUT NOT LIMITED TO CAPITAL
brought against Siemens, Purchaser the work until Siemens has satisfied it- COST, FUEL COST AND COST OF PUR-
shall protect Siemens in the same man- self that the prohibited conduct has CHASED OR REPLACEMENT POWER; OR
ner and to the same extent that Siemens ceased, and in such event (a) the date CLAIMS OF CUSTOMERS OF PUR-
has agreed to protect Purchaser under of delivery or time for performance will CHASER.
the provisions of Paragraph A above. be extended by a period of time which
Siemens determines necessary and (b) PURCHASER EXPRESSLY AGREES THAT
C. THIS ARTICLE IS AN EXCLUSIVE Purchaser will reimburse Siemens for THE REMEDIES PROVIDED IT HEREIN
STATEMENT OF ALL THE DUTIES OF Siemens’ and its Suppliers’ additional ARE EXCLUSIVE AND THAT UNDER NO
SIEMENS RELATING TO PATENTS, costs and expenses resulting from such CIRCUMSTANCES SHALL THE TOTAL
COPYRIGHTS OR TRADE SECRETS delay, including but not limited to any for AGGREGATE LIABILITY OF SIEMENS
AND DIRECT OR CONTRIBUTORY IN- demobilization or remobilization. UNDER ANY THEORY OF RECOVERY,
FRINGEMENT THEREOF AND OF ALL WHETHER BASED IN CONTRACT, IN
THE REMEDIES OF PURCHASER RE- C. Purchaser shall indemnify and hold TORT (INCLUDING NEGLIGENCE AND
LATING TO ANY CLAIMS, SUITS, OR Siemens harmless from and against any STRICT LIABILITY), UNDER WARRANTY,
PROCEEDINGS INVOLVING PAT- loss, damage or liability arising or result- OR OTHERWISE, EXCEED THE LESSER
ENTS, COPYRIGHTS OR TRADE SE- ing from non-compliance with the provi- OF ONE MILLION DOLLARS ($1,000,000)
CRETS. Compliance with this Article 12 sions of this Article 13 – Proprietary In- OR THE TOTAL PRICE PAID TO SIEMENS
– Intellectual Property as provided formation. UNDER THIS AGREEMENT.
herein shall constitute fulfillment of all li-
abilities of the parties under the Agree- D. When required by appropriate govern- THE PROVISIONS OF THIS ARTICLE
ment with respect to patents, copyrights mental authority, including governmental SHALL PREVAIL OVER ANY CONFLICT-
or trade secrets. regulations, applicable law or regulation, ING OR INCONSISTENT PROVISIONS
by order of a court of competent jurisdic- SET FORTH ELSEWHERE IN THIS
13. Proprietary Information tion or lawful subpoena (hereinafter col- AGREEMENT.
A. Siemens may have a proprietary interest lectively referred to as “Governmental
in information that may be furnished pur- Authority”), Purchaser may disclose 15. Transfer
suant to the Agreement. Purchaser will such proprietary information to such Prior to the transfer to another party of any
keep in confidence and will not disclose Governmental Authority; provided, how- Equipment or Purchaser’s Material or the
any such information which is specifi- ever, that prior to making any such dis- transfer of any interest in said Equipment or
cally designated as being proprietary to closure, Purchaser will: (a) provide Sie- Purchaser’s Material or Purchaser’s power
Siemens, other than to Purchaser’s em- mens with timely advance written notice generation facility in which said Equipment
ployees, without the prior written permis- of the proprietary information requested or Purchaser’s Material is installed, Pur-
sion of Siemens or use any such infor- by such Governmental Authority and chaser shall obtain for Siemens written as-
mation for other than the purpose for Purchaser’s intent to so disclose; (b) surances from the transferee of limitation of
which it is supplied. The provisions of minimize the amount of proprietary in- and protection against liability following the
this paragraph shall not apply to informa- formation to be provided consonant with proposed transfer at least equivalent to that
tion, notwithstanding any confidential the interests of Siemens and its Suppli- afforded Siemens and its Suppliers under
designation thereof, which is known to ers and the requirements of the Gov- the Agreement. Transfer contrary to the
Purchaser without any restriction as to ernmental Authority involved; and (c) provisions of this Article 15 - Transfer shall
disclosure or use at the time it is fur- make every reasonable effort (which make Purchaser the indemnitor of Siemens
nished, which is or becomes generally shall include participation by Siemens in and its Suppliers against any liabilities in-
available to the public without breach of discussions with the Governmental Au- curred by Siemens and its Suppliers in ex-
any agreement, or which is received thority involved) to secure confidential cess of those that would have been incurred
from a third party, including Purchaser’s treatment and minimization of the pro- had no such transfer taken place.
subsidiaries or affiliates, without limita- prietary information to be provided. In 16. Software License
tion or restriction on said third party or the event that efforts to secure confiden- Siemens grants to Purchaser a nonexclu-
Purchaser at the time of disclosure. tial treatment are unsuccessful, Siemens sive, nontransferable license to utilize any
shall have the prior right to revise such Siemens Software furnished hereunder
B. Siemens also has a proprietary interest information to minimize the disclosure of
in (i) the quotation, (ii) the Agreement solely for Purchaser’s internal use in con-
such information in a manner consonant nection with the Siemens equipment with or
and (iii) the processes and procedures with its interests and the requirements of
used by its personnel in performance of for which it is supplies or in which such
the Governmental Authority involved. Software is incorporated. All title and owner-
the Agreement. Accordingly, neither the
quotation, the Agreement or such proc- 14. Limitation of Liability ship of the Siemens Software, including,
esses and procedures will be disclosed PURCHASER EXPRESSLY AGREES THAT without limitation, the copyright to such
or viewed in whole or in part to third par- NEITHER SIEMENS NOR ITS SUPPLIERS Software, shall remain exclusively with Sie-
ties without the prior written permission WILL UNDER ANY CIRCUMSTANCES BE mens. Purchaser may make one backup
of Siemens. LIABLE UNDER ANY THEORY OF RE- copy of the Software for the sole purpose of
COVERY, WHETHER BASED IN CON- replacement of a worn, imparired, damaged,
In addition, Siemens has a proprietary TRACT, IN TORT (INCLUDING NEGLI- or destroyed original copy. Purchaser shall
interest in the manner of performance of GENCE AND STRICT LIABILITY), UNDER not itself, or with the assistance of others,
the work, including but not limited to the WARRANTY, OR OTHERWISE, FOR: ANY reverse compile, reverse engineer, or in any
know-how, processes, methods and INDIRECT, SPECIAL, INCIDENTAL OR other manner attempt to decipher in whole
techniques employed by Siemens in CONSEQUENTIAL LOSS OR DAMAGE OR or in part the logic or coherence of any Soft-
Page No. 6
Selling Policy
1270
ware licensed hereunder. Third party Soft- Siemens is providing Technical Services G. Asbestos and Thermal Insulation
ware provided by Siemens may be subject under the Agreement, or the schedule. The terms “Asbestos” and “Presumed
to a separate license agreement and/or Asbestos Containing Material” shall
registration requirements and limitations on 20. Inspection by Purchaser have the meanings set forth in United
copying and use. Purchaser shall have reasonable access to States Code of Federal Regulations
the areas of the Siemens plants where work Chapter 29 Section CFR 1926.1101 et
17. Compliance with Laws under the Agreement is being performed to seq., and “ACM” shall mean Asbestos
In the performance of work under the Agree- enable Purchaser to observe tests on the and Asbestos containing materials.
ment, Siemens and its Suppliers shall com- work. Siemens, if requested, will inform the
ply with all applicable provisions of Execu- Purchaser of those tests and procedures (1) The Purchaser warrants and repre-
tive Order 11246, as amended, relating to which can be witnessed. Should Purchaser sents that, in any areas which may
equal opportunity and non-segregated facili- elect to witness specific tests, Purchaser be accessed by Siemens or its Sup-
ties, the Fair Labor Standards Act of 1933 must so specify such requirement in ample pliers, any ACM which is or is con-
and the Occupational Safety and Health Act time to permit Siemens to include said wit- tained in thermal insulation or
of 1970. The price for such work is based on ness tests in the schedule. Siemens, if re- sprayed-on surfacing material is
compliance by Siemens with these laws and quested, will advise Purchaser of the sched- conspicuously and specifically
requirements as they are in effect on the ule of such tests. However, no rescheduling marked as ACM, and any other ACM
date of the offer submitted by Siemens (or of tests or delays in manufacturing or ship- is in a lawful condition.
the effective date of the Agreement if no ment will be made to accommodate such
offer is provided). inspection. Siemens will exercise reason- (2) Prior to Siemens’ commencement of
able efforts to secure similar rights with re- Services at any Site:
18. Export Law Compliance spect to the inspection of Purchaser’s work
Purchaser acknowledges that Siemens is (a) The Purchaser shall, at Pur-
at Supplier’s premises. chaser’s expense remove all
required to comply with applicable export
laws and regulations relating to the sale, 21. Miscellaneous Provisions thermal insulation, sprayed-on
exportation, transfer, assignment, disposal A. Shipment Dates surfacing material, and/or Pre-
and usage of the Equipment, Shop Repair Shipment dates are the dates the Equip- sumed Asbestos Containing Ma-
and Modernization, and Technical Services, ment or Purchaser’s Material will be terial (any or all of the foregoing
or one or more of them, provided under the ready for shipment from the factory and hereinafter “PACM”), and ACM
Contract, including any export license re- are predicated on the prompt receipt by which may be disturbed during or
quirements. Purchaser agrees that such Siemens of all information necessary to removal of which is required for
Equipment, Shop Repair and Modernization, commence and complete the work with- the performance of the Services;
and Technical Services, or one or more of out delay or interruption. and,
them, shall not at any time directly or indi- (b) The Purchaser shall ensure that
rectly be used, exported, sold, transferred, B. Waivers
The failure of either party to enforce at any areas where any activities
assigned or otherwise disposed of in a man- involving the abatement or re-
ner which will result in non-compliance with any time any of the provisions of the
Agreement or to require at any time per- moval of PACM or ACM shall be
such applicable export laws and regulations. conspicuously identified, posted
It shall be a condition of the continuing per- formance by the other party of any of
such provisions, shall in no way be con- and isolated, all as required by
formance by Siemens of its obligations here- applicable law.
under that compliance with such export laws strued to be a waiver of such provision,
and regulations be maintained at all times. nor in any way to affect the validity of the PURCHASER EXPRESSLY AC-
Agreement or any parts thereof, or the KNOWLEDGES AND AGREES
19. Changes right of either party thereafter to enforce THAT, IN PERFORMING THE
Purchaser may request changes within the each and every provision. SERVICES AND DISPATCHING
scope of the Agreement and, if accepted by EMPLOYEES TO WORK AREAS,
Siemens, the price, performance, schedule C. Modification
No waiver, modification, or amendment SIEMENS IS RELYING UPON THE
and other pertinent provisions of the Agree- AGREEMENTS, WARRANTIES
ment will be adjusted by mutual agreement of any of the provisions of the Agree-
ment shall be binding unless it is in writ- AND REPRESENTATIONS MADE
of the parties prior to implementation of the BY PURCHASER IN THIS PARA-
change. ing and signed by duly authorized repre-
sentatives of both parties. GRAPH 21.G. Without limiting its
Expenses incurred by Siemens due to (i) other rights and remedies, Siemens
delays, other than delays which are deemed D. Headings (i) shall not be obligated to com-
to be within the reasonable control of Sie- The headings used in the Agreement mence, and may stop any affected
mens, and (ii) changes in applicable laws are not to be construed as modifying, Work, unless and until it is fully satis-
and requirements after the date of the offer limiting or expanding in any way the fied that the Purchaser is in compli-
submitted by Siemens, as applicable, will be scope or extent of the provisions in the ance with this paragraph 21.G, and
treated as changes to the scope of work and Agreement. (ii) shall be entitled to an equitable
the Agreement will be adjusted as set forth adjustment in the schedule, price
E. Assignment and other provisions of the Agree-
in the previous paragraph. The Agreement will not be assigned by ment resulting from Purchaser’s non-
Siemens may make a change(s) in the Purchaser without the prior written con- compliance.
Equipment, the work on Purchaser’s Mate- sent of the other party, which consent of
rial or the Technical Services without addi- Siemens. Any purported assignment (3) In no event shall Siemens be obli-
tional compensation from Purchaser if such without such prior written consent shall gated to install, disturb, handle, or
change(s) does not adversely affect the be null and void. remove any PACM except as spe-
warranties, the interface with Purchaser’s cifically agreed in writing by Siemens
F. Governing Law and only after Siemens has been
equipment, materials and plant, the techni- The Agreement will be construed and
cal soundness of the work, the operability of provided acceptable chemical analy-
interpreted in accordance with the laws ses verifying that the same are not
the facility where the Equipment or Pur- of the State of Florida without application
chaser’s Material is installed or for which ACM.
of its choice-of-law rules.
Page No. 7
Selling Policy
1270
(4) Siemens makes no representation resulting from its disturbance or re- termination, expiration or cancellation of
that it is licensed to abate ACM. moval shall in all cases be the Pur- the Agreement.
Notwithstanding anything set forth in chaser’s responsibility.
the Agreement, Siemens shall be J. Site Safety
obligated to handle, remove, or rein- (5) Purchaser shall defend, indemnify Purchaser shall comply with all federal,
stall generator wedges, packing, or and hold Siemens harmless against state, and local safety regulations and
high temperature gaskets (such ma- any and all claims, demands, dam- standards applicable to the site and to
terials herein “GPW”) only if such ac- ages, losses, liabilities, fines, penal- the equipment on which Siemens will
tivities are within the scope of the ties, costs or expenses, including perform the work. Siemens shall not be
Services and only then to the extent without limitation any clean up or obligated to commence or perform work
that: remedial measures arising out of, unless Purchaser’s site complies with all
connected with, or resulting from the applicable safety requirements. In the
(a) (i) such activities would be clas- Purchaser’s failure to comply with event Purchaser’s site safety is non-
sified as Class II or Class III ac- the provisions of this Article 21.G. compliant, Siemens may suspend work
tivity under United States Code until such time as Purchaser corrects the
of Federal Regulations Chapter H. Integration non-compliance. To the extent Siemens
29 Section CFR 1926.1101 et The Agreement contains the entire incurs additional time and expense as
seq., (ii) such activities do not agreement and understanding between the result of Purchaser’s non-
require a permit, license, or au- the parties as to the subject matter of compliance, Siemens shall be entitled to
thorization, (iii) such activities the Agreement, and merges and super- an equitable adjustment in the schedule,
are not likely to generate air- sedes all prior agreements, commit- price and other affected provisions of the
borne asbestos fibers, and (iv) ments, representations, writings, and Agreement.
all such GPW is non-friable; or, discussions between them. Neither of
the parties will be bound by any prior ob- K. Purchaser’s Insurance
(b) Siemens is provided satisfactory ligations, conditions, warranties, or rep- If Purchaser procures property damage
written evidence that such GPW resentations with respect to the subject insurance applicable to occurrences at
is not ACM. matter of the Agreement. the Site, then Purchaser shall obtain a
waiver by the insurers of all subroga-
In all other cases, such activities I. Survival tion rights against Siemens.
shall be Purchaser’s responsibility The provisions entitled “Intellectual
and Siemens shall be entitled to an Property,” “Additional Conditions Appli-
equitable adjustment in the sched- cable to Nuclear Installations,” “Proprie-
ule, price and other pertinent af- tary Information,” “Limitation of Liability,”
fected provisions of the Agreement “Transfer,” “Software License” and the Siemens Power Generation, Inc.
should the same not be performed in second paragraph of “Delivery, Title and The Quadrangle
a timely manner. The disposal of Risk of Loss or Damage” shall survive 4400 Alafaya Trail
any GPW or scrap or waste material Orlando, Florida, U.S.A. 32826
Page No. 8
ILLUSTRATED GAS TURBINE
RENEWAL PARTS CATALOG
INTRODUCTION
This renewal parts catalog is prepared specifically for your gas turbine. Use this catalog
to identify the parts you need. The catalog is also a tool for planning, budgeting,
ordering, and training.
If you are preparing for an outage, contact us to find out which components you will
need to accomplish your outage. And, if unit availability is key, we can advise you on
what engine spares you should keep on hand to get your turbine back up and running.
GET A QUOTE
It's easy to get the parts you need
Submit quote requests directly to your District Sales Office.
• Style number
• Description of the part
• Assembly the part comes from
• Serial number
• Required quantity
• Required date
I
CONTENTS
The contents include the Table of Contents and the List of Figures. The Table of
Contents lists all the assemblies in each of the gas turbine elements by assembly
description followed by the associated drawing, the illustration number, and the page on
which it appears. The List of Figures displays the figure number, the assembly
description, the Siemens style number, and the page on which the illustration appears.
FRONTISPIECE
The first figure that is found behind the frontispiece tab represents the principle
illustration of the gas turbine applicable to your unit. This illustration denotes all lower
level illustrations for each specific element.
MULTIPLE ASSEMBLIES
Some identical assemblies are used multiple times in the unit. For example, complete
fuel nozzle assemblies. In these cases, the details are illustrated for one assembly and
the number of times it is used will be printed in the header line of the parts data, i.e., "4
ASSEMBLIES", "2 ASSEMBLIES", etc. The "QTY PER ASSEMBLY" data field will
reflect the quantity required for the assembly illustrated (usually one).
UNIT OF MEASURE
This field specifies the manner or form in which a part is supplied, i.e., each, foot, lb.,
etc. In some cases, the unit of measure is "PKG" (package) or "LOT" for which the
package or lot quantity is given in a separate field, "PKG/LOT SIZE". The "QTY PER
ASSEMBLY" however, will still reflect the "each piece" quantity.
II
WHERE USED SECTION
This section contains the recommended renewal parts in numeric order by style
number. Every application of each part is listed giving the component, page and item
number where the part can be found.
GLOSSARY
Descriptions of the headings included in this renewal parts catalog are as follows:
STYLE NUMBER The part number which uniquely identifies the part or
assembly. This number should be specified when
ordering the part. (Please refer to “Nonstandard
Parts” section for information on style number
variations.)
III
OUTAGE TYPE The purpose of the classification system is to assist
the customer in planning for their operational and
planned outage parts requirements. The
classifications are based on Siemens years of
experience in Turbine service. These outage
recommendations are to be a starting point for the
customer's planning process. Based on each unit’s
unique requirements, the recommendations may be
adjusted.
IV
WHERE USED The WHERE USED section shows where
recommended renewal parts are used among turbine
units in the renewal parts catalog. Each part in the
WHERE USED section includes the following
information:
V
HOW TO USE THE ILLUSTRATED PARTS CATALOG
IF YOU DON’T KNOW THE STYLE
NUMBER DO THIS
illustration item
number on the
associated
illustration. SIEMENS POWER GENERATION
RENEWAL PARTS DATA
3 Note the illustration item
number and refer to the
corresponding item number on
the parts list. This will give you a
style number, description,
quantity and recommendation.
2 Turn to the page
number indicated
and locate the SIEMENS POWER GENERATION
RENEWAL PARTS DATA
illustration item
number to obtain
the desired
Copyright Siemens Pow
information.
3. Use the HOME key on your keyboard to return to the first page.
6. Use magnifying glass on the tool bar to zoom in and out on data
and graphics.
7. Use hand button located on the tool bar to pan the data and
graphics.
TABLE OF CONTENTS
SERIAL: 37A8387-1 GAS TURBINE 501FD2 ......................................................... 7
-INLET MANIFOLD DETAIL 2357J01001 ILLUSTRATION ENG1845A ........................................... 9
-INLET CASING LOCATOR 37A8387-1 ILLUSTRATION ENG1800A ........................................... 11
--INLET CASING DETAIL 2248J71G07 ILLUSTRATION ENG2042B ........................................... 13
--INLET CASING SEALS 2248J71G07 ILLUSTRATION ENG1580A ........................................... 15
--INLET CASING HJ BOLTING 2248J71G07 ILLUSTRATION ENG1581A ........................................... 17
--THRUST BEARING LOCATOR 37A8387-1 ILLUSTRATION ENG0956A ........................................... 19
---THRUST BEARING HOUSING 2248J71G07 ILLUSTRATION ENG1859A ........................................... 21
---THRUST BEARING DETAIL 2248J71G13 ILLUSTRATION ENG1860A ........................................... 23
---THRUST BEARING SEAL HOUSING 2248J71G07 ILLUSTRATION ENG2373A ........................................... 25
--JOURNAL BEARING DETAIL 2297J43G01 ILLUSTRATION ENG2374A ........................................... 27
--VAR INLET GUIDE VANE LOCATOR 37A8387-1 ILLUSTRATION ENG0961A ........................................... 29
---VAR IGV INDICATOR DETAIL 2329J98G03 ILLUSTRATION ENG1459B ........................................... 31
---VAR INLET GUIDE VANE DETAIL 2329J98G03 ILLUSTRATION ENG1076A ........................................... 33
---VAR IGV PSNR & MTG DETAIL 2329J98G03 ILLUSTRATION ENG2516A ........................................... 35
---VAR IGV ACTUATING RING DET 2329J98G03 ILLUSTRATION ENG1464A ........................................... 37
-CPRSR & CPRSR COMB LOCATOR 37A8387-1 ILLUSTRATION ENG1352A ........................................... 39
--COMPRESSOR CYLINDER LOCATOR 37A8387-1 ILLUSTRATION ENG0939A ........................................... 41
---COMPRESSOR CYLINDER DETAIL 2248J72G11 ILLUSTRATION ENG2429A ........................................... 43
---CPRSR CYL DIAPHRAGM DETAIL 2248J72G01 ILLUSTRATION ENG2430A ........................................... 47
---CPRSR CYL DIAPHRAGM SEALS 2248J72G01 ILLUSTRATION ENG1922A ........................................... 49
---CPRSR CYLINDER HJ BOLTING 2248J72G21 ILLUSTRATION ENG1305A ........................................... 51
--CPRSR COMB CYLINDER LOCATOR 37A8387-1 ILLUSTRATION ENG2431A ........................................... 55
---CPRSR COMB CYL DETAIL (SH1) 4671A05G01 ILLUSTRATION ENG0979A ........................................... 57
---CPRSR COMB CYL DETAIL (SH2) 2248J99G08 ILLUSTRATION ENG1959C ........................................... 59
---CPRSR COMB VJ BOLTING 4671A05G01 ILLUSTRATION ENG2052A ........................................... 63
---CPRSR COMB HJ BOLTING (SH1) 2248J73G11 ILLUSTRATION ENG1059A ........................................... 67
---CPRSR COMB HJ BOLTING (SH2) 2248J73G11 ILLUSTRATION ENG1060A ........................................... 71
---COMB BSKT & TRNSN DET (SH1) 2248J99G08 ILLUSTRATION ENG2437A ........................................... 75
---COMB BSKT & TRNSN DET (SH2) 2248J99G08 ILLUSTRATION ENG2439A ........................................... 81
---FUEL NOZZLE DETAIL 2248J99G08 ILLUSTRATION ENG2512A 16 ASSEMBLIES ............................. 83
---CPRSR DIFF & TORQUE TUBE HSG 4671A05G01 ILLUSTRATION ENG2370B ........................................... 85
---TORQUE TUBE SEAL HSG (SH1) 2248J73G05 ILLUSTRATION ENG2371A ........................................... 87
---TORQUE TUBE SEAL HSG (SH2) 4671A05G01 ILLUSTRATION ENG1835A ........................................... 89
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 A-1
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 A-2
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 A-3
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
LIST OF FIGURES
1. MANKATO UNIT 1 ....................................................................................... 2
2. GAS TURBINE 501FD2 ................................................................................... 6
3. INLET MANIFOLD DETAIL 2357J01001 ........................................................ 8
4. INLET CASING LOCATOR 37A8387-1 ......................................................... 10
5. INLET CASING DETAIL 2248J71G07 ........................................................ 12
6. INLET CASING SEALS 2248J71G07 ........................................................ 14
7. INLET CASING HJ BOLTING 2248J71G07 ........................................................ 16
8. THRUST BEARING LOCATOR 37A8387-1 ......................................................... 18
9. THRUST BEARING HOUSING 2248J71G07 ........................................................ 20
10. THRUST BEARING DETAIL 2248J71G13 ........................................................ 22
11. THRUST BEARING SEAL HOUSING 2248J71G07 ........................................................ 24
12. JOURNAL BEARING DETAIL 2297J43G01 ........................................................ 26
13. VAR INLET GUIDE VANE LOCATOR 37A8387-1 ......................................................... 28
14. VAR IGV INDICATOR DETAIL 2329J98G03 ........................................................ 30
15. VAR INLET GUIDE VANE DETAIL 2329J98G03 ........................................................ 32
16. VAR IGV PSNR & MTG DETAIL 2329J98G03 ........................................................ 34
17. VAR IGV ACTUATING RING DET 2329J98G03 ........................................................ 36
18. CPRSR & CPRSR COMB LOCATOR 37A8387-1 ......................................................... 38
19. COMPRESSOR CYLINDER LOCATOR 37A8387-1 ......................................................... 40
20. COMPRESSOR CYLINDER DETAIL 2248J72G11 ........................................................ 42
21. CPRSR CYL DIAPHRAGM DETAIL 2248J72G01 ........................................................ 46
22. CPRSR CYL DIAPHRAGM SEALS 2248J72G01 ........................................................ 48
23. CPRSR CYLINDER HJ BOLTING 2248J72G21 ........................................................ 50
24. CPRSR COMB CYLINDER LOCATOR 37A8387-1 ......................................................... 54
25. CPRSR COMB CYL DETAIL (SH1) 4671A05G01 ........................................................ 56
26. CPRSR COMB CYL DETAIL (SH2) 2248J99G08 ........................................................ 58
27. CPRSR COMB VJ BOLTING 4671A05G01 ........................................................ 62
28. CPRSR COMB HJ BOLTING (SH1) 2248J73G11 ........................................................ 66
29. CPRSR COMB HJ BOLTING (SH2) 2248J73G11 ........................................................ 70
30. COMB BSKT & TRNSN DET (SH1) 2248J99G08 ........................................................ 74
31. COMB BSKT & TRNSN DET (SH2) 2248J99G08 ........................................................ 80
32. FUEL NOZZLE DETAIL 2248J99G08 ........................................................ 82
33. CPRSR DIFF & TORQUE TUBE HSG 4671A05G01 ........................................................ 84
34. TORQUE TUBE SEAL HSG (SH1) 2248J73G05 ........................................................ 86
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 B-1
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 B-2
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 B-3
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 1
Figure 1. MANKATO UNIT 1
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 2
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 3
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 4
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 5
Figure 2. GAS TURBINE 501FD2
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 6
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 7
Figure 3. INLET MANIFOLD DETAIL 2357J01001
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 8
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 9
Figure 4. INLET CASING LOCATOR 37A8387-1
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 10
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 11
Figure 5. INLET CASING DETAIL 2248J71G07
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 12
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 13
Figure 6. INLET CASING SEALS 2248J71G07
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 14
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 15
Figure 7. INLET CASING HJ BOLTING 2248J71G07
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 16
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 17
Figure 8. THRUST BEARING LOCATOR 37A8387-1
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 18
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 19
Figure 9. THRUST BEARING HOUSING 2248J71G07
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 20
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 21
Figure 10. THRUST BEARING DETAIL 2248J71G13
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 22
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 23
Figure 11. THRUST BEARING SEAL HOUSING 2248J71G07
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 24
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 25
Figure 12. JOURNAL BEARING DETAIL 2297J43G01
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 26
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 27
Figure 13. VAR INLET GUIDE VANE LOCATOR 37A8387-1
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 28
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 29
Figure 14. VAR IGV INDICATOR DETAIL 2329J98G03
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 30
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 31
Figure 15. VAR INLET GUIDE VANE DETAIL 2329J98G03
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 32
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 33
Figure 16. VAR IGV PSNR & MTG DETAIL 2329J98G03
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 34
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 35
Figure 17. VAR IGV ACTUATING RING DET 2329J98G03
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 36
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 37
Figure 18. CPRSR & CPRSR COMB LOCATOR 37A8387-1
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 38
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 39
Figure 19. COMPRESSOR CYLINDER LOCATOR 37A8387-1
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 40
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 41
Figure 20. COMPRESSOR CYLINDER DETAIL 2248J72G11
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 42
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 43
COMPRESSOR CYLINDER DETAIL 2248J72G11
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 44
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 45
Figure 21. CPRSR CYL DIAPHRAGM DETAIL 2248J72G01
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 46
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 47
Figure 22. CPRSR CYL DIAPHRAGM SEALS 2248J72G01
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 48
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 49
Figure 23. CPRSR CYLINDER HJ BOLTING 2248J72G21
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 50
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 51
CPRSR CYLINDER HJ BOLTING 2248J72G21
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 52
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 53
Figure 24. CPRSR COMB CYLINDER LOCATOR 37A8387-1
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 54
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 55
Figure 25. CPRSR COMB CYL DETAIL (SH1) 4671A05G01
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 56
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 57
Figure 26. CPRSR COMB CYL DETAIL (SH2) 2248J99G08
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 58
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 59
CPRSR COMB CYL DETAIL (SH2) 2248J99G08
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 60
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 61
Figure 27. CPRSR COMB VJ BOLTING 4671A05G01
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 62
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 63
CPRSR COMB VJ BOLTING 4671A05G01
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 64
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 65
Figure 28. CPRSR COMB HJ BOLTING (SH1) 2248J73G11
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 66
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 67
CPRSR COMB HJ BOLTING (SH1) 2248J73G11
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 68
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 69
Figure 29. CPRSR COMB HJ BOLTING (SH2) 2248J73G11
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 70
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 71
CPRSR COMB HJ BOLTING (SH2) 2248J73G11
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 72
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 73
Figure 30. COMB BSKT & TRNSN DET (SH1) 2248J99G08
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 74
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 75
COMB BSKT & TRNSN DET (SH1) 2248J99G08
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 76
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 77
COMB BSKT & TRNSN DET (SH1) 2248J99G08
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 78
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 79
Figure 31. COMB BSKT & TRNSN DET (SH2) 2248J99G08
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 80
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 81
Figure 32. FUEL NOZZLE DETAIL 2248J99G08
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 82
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 83
Figure 33. CPRSR DIFF & TORQUE TUBE HSG 4671A05G01
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 84
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 85
Figure 34. TORQUE TUBE SEAL HSG (SH1) 2248J73G05
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 86
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 87
Figure 35. TORQUE TUBE SEAL HSG (SH2) 4671A05G01
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 88
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 89
Figure 36. GAS PIPING - PILOT STAGE 2249J48G01
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 90
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 91
Figure 37. GAS PIPING - STAGE A(HEATED) 2249J49G02
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 92
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 93
Figure 38. GAS PIPING - STAGE B(HEATED) 2249J50G02
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 94
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 95
Figure 39. GAS PIPING - TOP HAT(HEATED) 2249J51G02
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 96
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 97
Figure 40. TURBINE CYLINDER LOCATOR 37A8387-1
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 98
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 99
Figure 41. TURBINE CYLINDER DET (SH1) 2248J74G02
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 100
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 101
Figure 42. TURBINE CYLINDER DET (SH2) 2248J74G02
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 102
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 103
Figure 43. TURBINE CYLINDER DET (SH3) 2248J74G02
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 104
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 105
Figure 44. TURBINE CYLINDER VJ BOLTING 4671A05G01
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 106
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 107
Figure 45. TURBINE CYLINDER HJ BOLTING 2248J74G02
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 108
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 109
TURBINE CYLINDER HJ BOLTING 2248J74G02
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 110
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 111
Figure 46. BLADE RING 1 (SH1) 1852J01G04
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 112
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 113
BLADE RING 1 (SH1) 1852J01G04
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 114
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 115
Figure 47. BLADE RING 1 (SH2) 1852J01G04
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 116
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 117
Figure 48. BLADE RING 2 (SH1) 1852J02G08
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 118
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 119
Figure 49. BLADE RING 2 (SH2) 1852J02G08
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 120
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 121
BLADE RING 2 (SH2) 1852J02G08
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 122
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 123
Figure 50. BLADE RING 2 (SH3) 1852J02G08
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 124
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 125
BLADE RING 2 (SH3) 1852J02G08
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 126
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 127
Figure 51. BLADE RING 3 (SH1) 1852J03G09
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 128
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 129
Figure 52. BLADE RING 3 (SH2) 1852J03G09
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 130
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 131
Figure 53. BLADE RING 3 (SH3) 1852J03G09
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 132
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 133
BLADE RING 3 (SH3) 1852J03G09
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 134
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 135
Figure 54. BLADE RING 4 (SH1) 1852J04G03
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 136
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 137
Figure 55. BLADE RING 4 (SH2) 1852J04G03
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 138
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 139
Figure 56. BLADE RING 4 (SH3) 1852J04G03
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 140
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 141
BLADE RING 4 (SH3) 1852J04G03
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 142
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 143
Figure 57. EXHAUST CYLINDER LOCATOR 37A8387-1
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 144
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 145
Figure 58. EXHAUST CYLINDER DET (SH1) 2248J75G01
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 146
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 147
Figure 59. EXHAUST CYLINDER DET (SH2) 2248J75G01
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 148
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 149
Figure 60. EXHAUST CYLINDER SEALS 2248J75G12
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 150
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 151
Figure 61. EXHAUST CYLINDER HJ BOLTING 2248J75G01
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 152
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 153
Figure 62. JOURNAL BEARING DETAIL 2297J43G02
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 154
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 155
Figure 63. EXHAUST CYLINDER STATIC SEAL 2248J75G01
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 156
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 157
Figure 64. EXHAUST CYL THERMAL DETECTOR 2248J75G12
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 158
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 159
Figure 65. EXHAUST MANIFOLD DETAIL 2357J22G01
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 160
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 161
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 162
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 163
Figure 66. ROTOR
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 164
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 165
Figure 67. ROTOR LOCATOR 2072J90G53
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 166
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 167
Figure 68. COMPRESSOR BLADE DETAIL 2072J90G53
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 168
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 169
COMPRESSOR BLADE DETAIL 2072J90G53
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 170
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 171
COMPRESSOR BLADE DETAIL 2072J90G53
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 172
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 173
Figure 69. TURBINE BLADE DETAIL 2072J90G53
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 174
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 175
Figure 70. TURBINE BLADE SEALS (SH1) 2072J90G53
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 176
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 177
Figure 71. TURBINE BLADE SEALS (SH2) 2072J90G53
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 178
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 179
Figure 72. ROTOR COUPLING 2295J01G07
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 180
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 181
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 182
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 183
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 184
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
STYLE UNIT QTY QTY PKG/LOT OUTAGE ----- WHERE USED ----
NUMBER DESCRIPTION MEAS REQ REC SIZE TYPE ELEMENT PAGE ITEM STOCK CODE/REMARKS
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 185
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
STYLE UNIT QTY QTY PKG/LOT OUTAGE ----- WHERE USED ----
NUMBER DESCRIPTION MEAS REQ REC SIZE TYPE ELEMENT PAGE ITEM STOCK CODE/REMARKS
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 186
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
STYLE UNIT QTY QTY PKG/LOT OUTAGE ----- WHERE USED ----
NUMBER DESCRIPTION MEAS REQ REC SIZE TYPE ELEMENT PAGE ITEM STOCK CODE/REMARKS
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 187
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
STYLE UNIT QTY QTY PKG/LOT OUTAGE ----- WHERE USED ----
NUMBER DESCRIPTION MEAS REQ REC SIZE TYPE ELEMENT PAGE ITEM STOCK CODE/REMARKS
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 188
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
STYLE UNIT QTY QTY PKG/LOT OUTAGE ----- WHERE USED ----
NUMBER DESCRIPTION MEAS REQ REC SIZE TYPE ELEMENT PAGE ITEM STOCK CODE/REMARKS
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 189
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
STYLE UNIT QTY QTY PKG/LOT OUTAGE ----- WHERE USED ----
NUMBER DESCRIPTION MEAS REQ REC SIZE TYPE ELEMENT PAGE ITEM STOCK CODE/REMARKS
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 190
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
STYLE UNIT QTY QTY PKG/LOT OUTAGE ----- WHERE USED ----
NUMBER DESCRIPTION MEAS REQ REC SIZE TYPE ELEMENT PAGE ITEM STOCK CODE/REMARKS
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 191
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
STYLE UNIT QTY QTY PKG/LOT OUTAGE ----- WHERE USED ----
NUMBER DESCRIPTION MEAS REQ REC SIZE TYPE ELEMENT PAGE ITEM STOCK CODE/REMARKS
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 192
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
STYLE UNIT QTY QTY PKG/LOT OUTAGE ----- WHERE USED ----
NUMBER DESCRIPTION MEAS REQ REC SIZE TYPE ELEMENT PAGE ITEM STOCK CODE/REMARKS
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 193
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
STYLE UNIT QTY QTY PKG/LOT OUTAGE ----- WHERE USED ----
NUMBER DESCRIPTION MEAS REQ REC SIZE TYPE ELEMENT PAGE ITEM STOCK CODE/REMARKS
1851J87G02 OIL SEAL HSG - EXH SEAL EACH 1 M ENG 151 3 __________________
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 194
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
STYLE UNIT QTY QTY PKG/LOT OUTAGE ----- WHERE USED ----
NUMBER DESCRIPTION MEAS REQ REC SIZE TYPE ELEMENT PAGE ITEM STOCK CODE/REMARKS
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 195
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
STYLE UNIT QTY QTY PKG/LOT OUTAGE ----- WHERE USED ----
NUMBER DESCRIPTION MEAS REQ REC SIZE TYPE ELEMENT PAGE ITEM STOCK CODE/REMARKS
219T073G01 SWEEP TUBE COMB U/V DET EACH 2 2 MHC ENG 59 21 __________________
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 196
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
STYLE UNIT QTY QTY PKG/LOT OUTAGE ----- WHERE USED ----
NUMBER DESCRIPTION MEAS REQ REC SIZE TYPE ELEMENT PAGE ITEM STOCK CODE/REMARKS
2346C26064 SCREW - SOC HD .500 X 4.00 EACH 128 128 MHC ENG 77 28 __________________
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 197
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
STYLE UNIT QTY QTY PKG/LOT OUTAGE ----- WHERE USED ----
NUMBER DESCRIPTION MEAS REQ REC SIZE TYPE ELEMENT PAGE ITEM STOCK CODE/REMARKS
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 198
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
STYLE UNIT QTY QTY PKG/LOT OUTAGE ----- WHERE USED ----
NUMBER DESCRIPTION MEAS REQ REC SIZE TYPE ELEMENT PAGE ITEM STOCK CODE/REMARKS
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 199
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
STYLE UNIT QTY QTY PKG/LOT OUTAGE ----- WHERE USED ----
NUMBER DESCRIPTION MEAS REQ REC SIZE TYPE ELEMENT PAGE ITEM STOCK CODE/REMARKS
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 200
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
STYLE UNIT QTY QTY PKG/LOT OUTAGE ----- WHERE USED ----
NUMBER DESCRIPTION MEAS REQ REC SIZE TYPE ELEMENT PAGE ITEM STOCK CODE/REMARKS
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 201
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
STYLE UNIT QTY QTY PKG/LOT OUTAGE ----- WHERE USED ----
NUMBER DESCRIPTION MEAS REQ REC SIZE TYPE ELEMENT PAGE ITEM STOCK CODE/REMARKS
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 202
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
STYLE UNIT QTY QTY PKG/LOT OUTAGE ----- WHERE USED ----
NUMBER DESCRIPTION MEAS REQ REC SIZE TYPE ELEMENT PAGE ITEM STOCK CODE/REMARKS
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 203
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
STYLE UNIT QTY QTY PKG/LOT OUTAGE ----- WHERE USED ----
NUMBER DESCRIPTION MEAS REQ REC SIZE TYPE ELEMENT PAGE ITEM STOCK CODE/REMARKS
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 204
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
STYLE UNIT QTY QTY PKG/LOT OUTAGE ----- WHERE USED ----
NUMBER DESCRIPTION MEAS REQ REC SIZE TYPE ELEMENT PAGE ITEM STOCK CODE/REMARKS
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 205
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
STYLE UNIT QTY QTY PKG/LOT OUTAGE ----- WHERE USED ----
NUMBER DESCRIPTION MEAS REQ REC SIZE TYPE ELEMENT PAGE ITEM STOCK CODE/REMARKS
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 206
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
STYLE UNIT QTY QTY PKG/LOT OUTAGE ----- WHERE USED ----
NUMBER DESCRIPTION MEAS REQ REC SIZE TYPE ELEMENT PAGE ITEM STOCK CODE/REMARKS
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 207
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
STYLE UNIT QTY QTY PKG/LOT OUTAGE ----- WHERE USED ----
NUMBER DESCRIPTION MEAS REQ REC SIZE TYPE ELEMENT PAGE ITEM STOCK CODE/REMARKS
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 208
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
STYLE UNIT QTY QTY PKG/LOT OUTAGE ----- WHERE USED ----
NUMBER DESCRIPTION MEAS REQ REC SIZE TYPE ELEMENT PAGE ITEM STOCK CODE/REMARKS
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 209
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
STYLE UNIT QTY QTY PKG/LOT OUTAGE ----- WHERE USED ----
NUMBER DESCRIPTION MEAS REQ REC SIZE TYPE ELEMENT PAGE ITEM STOCK CODE/REMARKS
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 210
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
STYLE UNIT QTY QTY PKG/LOT OUTAGE ----- WHERE USED ----
NUMBER DESCRIPTION MEAS REQ REC SIZE TYPE ELEMENT PAGE ITEM STOCK CODE/REMARKS
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 211
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
STYLE UNIT QTY QTY PKG/LOT OUTAGE ----- WHERE USED ----
NUMBER DESCRIPTION MEAS REQ REC SIZE TYPE ELEMENT PAGE ITEM STOCK CODE/REMARKS
4193C90903 NUT - HEX (M12 X 1.75) EACH 4 4 MHC ENG 113 12 __________________
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 212
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
STYLE UNIT QTY QTY PKG/LOT OUTAGE ----- WHERE USED ----
NUMBER DESCRIPTION MEAS REQ REC SIZE TYPE ELEMENT PAGE ITEM STOCK CODE/REMARKS
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 213
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
STYLE UNIT QTY QTY PKG/LOT OUTAGE ----- WHERE USED ----
NUMBER DESCRIPTION MEAS REQ REC SIZE TYPE ELEMENT PAGE ITEM STOCK CODE/REMARKS
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 214
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
STYLE UNIT QTY QTY PKG/LOT OUTAGE ----- WHERE USED ----
NUMBER DESCRIPTION MEAS REQ REC SIZE TYPE ELEMENT PAGE ITEM STOCK CODE/REMARKS
4205C34008 WASHER - LOCK (M16) EACH 116 116 MH ENG 103 3 __________________
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 215
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
STYLE UNIT QTY QTY PKG/LOT OUTAGE ----- WHERE USED ----
NUMBER DESCRIPTION MEAS REQ REC SIZE TYPE ELEMENT PAGE ITEM STOCK CODE/REMARKS
4209C44G01 PLATE - SEAL & LOCK ROW 3 EACH 22 11 MH RTR 179 11 __________________
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 216
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
STYLE UNIT QTY QTY PKG/LOT OUTAGE ----- WHERE USED ----
NUMBER DESCRIPTION MEAS REQ REC SIZE TYPE ELEMENT PAGE ITEM STOCK CODE/REMARKS
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 217
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
STYLE UNIT QTY QTY PKG/LOT OUTAGE ----- WHERE USED ----
NUMBER DESCRIPTION MEAS REQ REC SIZE TYPE ELEMENT PAGE ITEM STOCK CODE/REMARKS
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 218
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
STYLE UNIT QTY QTY PKG/LOT OUTAGE ----- WHERE USED ----
NUMBER DESCRIPTION MEAS REQ REC SIZE TYPE ELEMENT PAGE ITEM STOCK CODE/REMARKS
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 219
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
STYLE UNIT QTY QTY PKG/LOT OUTAGE ----- WHERE USED ----
NUMBER DESCRIPTION MEAS REQ REC SIZE TYPE ELEMENT PAGE ITEM STOCK CODE/REMARKS
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 220
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
STYLE UNIT QTY QTY PKG/LOT OUTAGE ----- WHERE USED ----
NUMBER DESCRIPTION MEAS REQ REC SIZE TYPE ELEMENT PAGE ITEM STOCK CODE/REMARKS
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 221
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
STYLE UNIT QTY QTY PKG/LOT OUTAGE ----- WHERE USED ----
NUMBER DESCRIPTION MEAS REQ REC SIZE TYPE ELEMENT PAGE ITEM STOCK CODE/REMARKS
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 222
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
STYLE UNIT QTY QTY PKG/LOT OUTAGE ----- WHERE USED ----
NUMBER DESCRIPTION MEAS REQ REC SIZE TYPE ELEMENT PAGE ITEM STOCK CODE/REMARKS
4211C69004 SCREW (M30 X 3.50) X 90.00 EACH 32 32 MHC ENG 101 11 __________________
4211C71001 NUT - LOCK (M20 X 2.50) EACH 110 28 M ENG 161 12 __________________
4211C76002 NUT - HEX (ALT) (M24 X 3.00) EACH 8 4 MH ENG 111 27 __________________
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 223
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
STYLE UNIT QTY QTY PKG/LOT OUTAGE ----- WHERE USED ----
NUMBER DESCRIPTION MEAS REQ REC SIZE TYPE ELEMENT PAGE ITEM STOCK CODE/REMARKS
4211C78002 SCREW - (M12 X 1.75) X 28.00 EACH 56 56 MHC ENG 117 2 __________________
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 224
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
STYLE UNIT QTY QTY PKG/LOT OUTAGE ----- WHERE USED ----
NUMBER DESCRIPTION MEAS REQ REC SIZE TYPE ELEMENT PAGE ITEM STOCK CODE/REMARKS
4211C78025 SCREW - SOC HD (ALT) (M16) EACH 64 6 MHC ENG 113 19 __________________
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 225
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
STYLE UNIT QTY QTY PKG/LOT OUTAGE ----- WHERE USED ----
NUMBER DESCRIPTION MEAS REQ REC SIZE TYPE ELEMENT PAGE ITEM STOCK CODE/REMARKS
4211C79017 SCREW (M12 X 1.75) X 40.00 EACH 4 4 MHC ENG 113 15 __________________
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 226
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
STYLE UNIT QTY QTY PKG/LOT OUTAGE ----- WHERE USED ----
NUMBER DESCRIPTION MEAS REQ REC SIZE TYPE ELEMENT PAGE ITEM STOCK CODE/REMARKS
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 227
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
STYLE UNIT QTY QTY PKG/LOT OUTAGE ----- WHERE USED ----
NUMBER DESCRIPTION MEAS REQ REC SIZE TYPE ELEMENT PAGE ITEM STOCK CODE/REMARKS
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 228
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
STYLE UNIT QTY QTY PKG/LOT OUTAGE ----- WHERE USED ----
NUMBER DESCRIPTION MEAS REQ REC SIZE TYPE ELEMENT PAGE ITEM STOCK CODE/REMARKS
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 229
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
STYLE UNIT QTY QTY PKG/LOT OUTAGE ----- WHERE USED ----
NUMBER DESCRIPTION MEAS REQ REC SIZE TYPE ELEMENT PAGE ITEM STOCK CODE/REMARKS
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 230
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
STYLE UNIT QTY QTY PKG/LOT OUTAGE ----- WHERE USED ----
NUMBER DESCRIPTION MEAS REQ REC SIZE TYPE ELEMENT PAGE ITEM STOCK CODE/REMARKS
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 231
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
STYLE UNIT QTY QTY PKG/LOT OUTAGE ----- WHERE USED ----
NUMBER DESCRIPTION MEAS REQ REC SIZE TYPE ELEMENT PAGE ITEM STOCK CODE/REMARKS
6D38180131 KEY - LOCKING REGULAR ROW 13 EACH 119 12 M RTR 173 53 __________________
6D38180141 KEY - LOCKING REGULAR ROW 14 EACH 119 12 M RTR 173 56 __________________
6D38180151 KEY - LOCKING REGULAR ROW 15 EACH 123 12 M RTR 173 59 __________________
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 232
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
STYLE UNIT QTY QTY PKG/LOT OUTAGE ----- WHERE USED ----
NUMBER DESCRIPTION MEAS REQ REC SIZE TYPE ELEMENT PAGE ITEM STOCK CODE/REMARKS
6D38180161 KEY - LOCKING REGULAR ROW 16 EACH 123 12 M RTR 173 62 __________________
626C924044 SCREW - SOC HD .875 X 2.75 EACH 192 3 MHC ENG 83 2 __________________
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 233
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
STYLE UNIT QTY QTY PKG/LOT OUTAGE ----- WHERE USED ----
NUMBER DESCRIPTION MEAS REQ REC SIZE TYPE ELEMENT PAGE ITEM STOCK CODE/REMARKS
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 234
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
STYLE UNIT QTY QTY PKG/LOT OUTAGE ----- WHERE USED ----
NUMBER DESCRIPTION MEAS REQ REC SIZE TYPE ELEMENT PAGE ITEM STOCK CODE/REMARKS
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 235
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
STYLE UNIT QTY QTY PKG/LOT OUTAGE ----- WHERE USED ----
NUMBER DESCRIPTION MEAS REQ REC SIZE TYPE ELEMENT PAGE ITEM STOCK CODE/REMARKS
7919D40013 SCREW (M24 X 3.00) X 75.00 EACH 384 96 MHC ENG 77 29 __________________
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 236
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
STYLE UNIT QTY QTY PKG/LOT OUTAGE ----- WHERE USED ----
NUMBER DESCRIPTION MEAS REQ REC SIZE TYPE ELEMENT PAGE ITEM STOCK CODE/REMARKS
7937D46001 PLATE - SEAL & LOCK ROW 1 EACH 36 11 MH RTR 177 1 __________________
7937D46002 PLATE - SEAL & LOCK ROW 1 EACH 36 11 MH RTR 177 7 __________________
7937D47001 PLATE - SEAL & LOCK ROW 2 EACH 33 10 MH RTR 177 12 __________________
7937D47002 PLATE - SEAL & LOCK ROW 2 EACH 33 10 MH RTR 177 14 __________________
7937D48001 PLATE - SEAL & LOCK ROW 3 EACH 56 11 MH RTR 179 1 __________________
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 237
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
STYLE UNIT QTY QTY PKG/LOT OUTAGE ----- WHERE USED ----
NUMBER DESCRIPTION MEAS REQ REC SIZE TYPE ELEMENT PAGE ITEM STOCK CODE/REMARKS
7937D48002 PLATE - SEAL & LOCK ROW 3 EACH 56 11 MH RTR 179 7 __________________
7937D50001 PLATE - SEAL & LOCK ROW 1 EACH 24 12 MH RTR 177 2 __________________
7937D50002 PLATE - SEAL & LOCK ROW 2 EACH 22 11 MH RTR 177 13 __________________
7937D50003 PLATE - SEAL & LOCK ROW 3 EACH 28 10 MH RTR 179 2 __________________
7937D52001 PLATE - SEAL & LOCK ROW 2 EACH 33 10 MH RTR 177 17 __________________
7937D52002 PLATE - SEAL & LOCK ROW 2 EACH 33 10 MH RTR 177 18 __________________
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 238
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
STYLE UNIT QTY QTY PKG/LOT OUTAGE ----- WHERE USED ----
NUMBER DESCRIPTION MEAS REQ REC SIZE TYPE ELEMENT PAGE ITEM STOCK CODE/REMARKS
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 239
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
STYLE UNIT QTY QTY PKG/LOT OUTAGE ----- WHERE USED ----
NUMBER DESCRIPTION MEAS REQ REC SIZE TYPE ELEMENT PAGE ITEM STOCK CODE/REMARKS
7939D27035 SCREW - SOC HD 2.50 X 160.00 EACH 110 28 M ENG 161 11 __________________
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 240
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
STYLE UNIT QTY QTY PKG/LOT OUTAGE ----- WHERE USED ----
NUMBER DESCRIPTION MEAS REQ REC SIZE TYPE ELEMENT PAGE ITEM STOCK CODE/REMARKS
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 241
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
STYLE UNIT QTY QTY PKG/LOT OUTAGE ----- WHERE USED ----
NUMBER DESCRIPTION MEAS REQ REC SIZE TYPE ELEMENT PAGE ITEM STOCK CODE/REMARKS
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 242
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
STYLE UNIT QTY QTY PKG/LOT OUTAGE ----- WHERE USED ----
NUMBER DESCRIPTION MEAS REQ REC SIZE TYPE ELEMENT PAGE ITEM STOCK CODE/REMARKS
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 243
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
STYLE UNIT QTY QTY PKG/LOT OUTAGE ----- WHERE USED ----
NUMBER DESCRIPTION MEAS REQ REC SIZE TYPE ELEMENT PAGE ITEM STOCK CODE/REMARKS
8099D16001 PLATE - SEAL & LOCK ROW 4 EACH 21 11 MH RTR 179 14 __________________
8099D16002 PLATE - SEAL & LOCK ROW 4 EACH 21 11 MH RTR 179 16 __________________
8099D17001 PLATE - SEAL & LOCK ROW 4 EACH 21 11 MH RTR 179 20 __________________
8099D17002 PLATE - SEAL & LOCK ROW 4 EACH 21 11 MH RTR 179 19 __________________
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 244
SIEMENS POWER GENERATION, INC.
RENEWAL PARTS DATA
STYLE UNIT QTY QTY PKG/LOT OUTAGE ----- WHERE USED ----
NUMBER DESCRIPTION MEAS REQ REC SIZE TYPE ELEMENT PAGE ITEM STOCK CODE/REMARKS
PROPRIETARY Copyright Siemens Power Generation, Inc. 2006, All Rights Reserved 09/05/06 245