Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
1. Overview
USB to RS485 Converter is an intelligent module which connects
to a PC Universal Serial Bus port providing a high-speed
asynchronous RS-485 serial port. The USB-485 Converter
provides easy connectivity between the PC and standard
communication ports, not requiring PC reconfiguration,
assignment of IRQs or jumper settings.
Multiple modules can be installed when using USB hubs thus allowing a hassle-free configuration of a
multi serial system without any IRQ or DMA configuration.
2. Specifications
Parameter Value
Communication speed 300 to 1MBPS baud
Power consumption 50mA @5volt (power provided by the PC’s USB port.)
Temperature Range 0ºC to 50ºC.
Humidity Range 10 to 90% R.H. Non-condensing.
Modes of Operation RS-485 Half Duplex (2-wire)
Termination 120R Ohm
RS485 Bias 4K7 resistors as pull-up/pull-down Data+ and Data- respectively.
Receiver Input Impedance 12 K Ohm
Receiver Input Sensitivity ±200 mV
Receiver Input Hysteresis 50 mV Typ
Driver Output Capability ±60 mA Max
4. Features
• Computer interface: USB V1.1 Plug and Play.
• Operational system virtual serial port driver.
• Supports Windows 98/ME/XP/2000/CE, MAC & Linux 2.4.20 or superior.
• Field Interfaces: RS485 Half Duplex,
• Automatic flow control for RS485 Half Duplex.
• Transmission rate: from 300 bps to 1Mbps.
• Maximum RS485/RS422 cable length : 1200 m
• Maximum number of devices in the RS485 network: 32 devices
• Power: from the USB port.
• RS485 interface.
• USB connection: Mini-B connector
• A 1.5 m cable with plugs mini-B and A is provided with the module.
• RS485 connector: screw terminal type accepting 1.5 mm² (16 AWG) wires.
• ABS enclosure
• Meet or Exceed the Requirements of ANSI Standards TIA/EIA-422-B and TIA/EIA-485-A and ITU
Recommendations V.11 and X.27
• Designed for Multipoint Transmission on Long Bus Lines in Noisy Environments
• Thermal Shutdown Protection
• Driver Positive and Negative Current Limiting