=o
LUET (as selected by he inspection tea) to caryout
he approved Technical Specifcations, Guaranters 48) a
BUET/ CUET/ KUET IRI
BPDB or tr
im
iformity t0 tt
fee me to tae
i il consignment will be rejected. All cost of testing of Materiat the
spectiatins in fests, he fl ore wil be Borne by the suppl. HS Geog
it load
egal Spe IFICATIONS/REQUIREMENTS OF H-TYPE CONNECTOR
TAA GENERAL:
This section of the document includes the design, manufacture, testing »
inspection of H-Type Connector as specified
TE DATA: .
soe nips Connector to be supplied against this tender shall be suitable fq,
satisfactory use under the following climatic conditions:
on + ioe es yy
~ simultaneously. fad
Maximum Temperature 2 40°C
Minimum Temperature 1 03°C
‘Maximum yearly weighted average 1 30°C
Temperature
Relative humidity + 60-100%
Annual mean relative humidity 75%
‘Average annual rain fall 2 3454mm
Maximum wind velocity 200 km/ hour
Average sokerauni evel + 80 days! year
Maximum altitude above sea level > 300meters
‘Atmospheric, Mechanical and Chemical : Moderately polluted
impurties
H-Type Connector as specified will be installed in tropical locations and ina
hot humid environment with presence of the insects and vermin. The
information is given as a guide for Tender and no responsibility for its accuracy
will be accepted, nor any claim based on the above will be entertained.
7.4.3. SYSTEM PARTICULARS:
SL.
No, | SYSTEM CHARACTERISTICS VOLTAGE LEVEL
1. [Normal System Vollage, KV a
(Voltage Class) we " ®
3._| Maximum System Vollage, KV | 245 2
4 System Frequeney, He 30 0 36 7
. | Phase Rotation ~ iT
(Anti-Clock wise) aes at er "
6.__| Type of System Groundin
Solid i nid | $e
1 Rated Fault Level (3-Phase | 12550 00 “800 &
Symmetrical), MVA 3 sec,
8._| Basic Insulation Level. KV 750 é mo]
LOW VOLTAGE 418/ 240V CHARACTERISTICS: = ——
9. | Normal System Votage, V 418/240
(Voltage Class) .
10._| Type of stem Grounding a
— 10
Scanned with CamScannerq din this Section shall cont
ranat Connectors a8 speci ieg Or O in overhead lines in at
114 pa TET ihe flows, Testing and Performance ofthe H-Type Co
ites Da 88 Part-1 & BS-4579 Part 3 of equivalent Internati
wih
sore?
NS: tit
IFICATION. ors will be used for connecting the ACSR
148 SEietype Comme AAG Conductors and Copper Conduct
| etal Sune r Beta type atcardng tthe convectons
‘These
inectOrs
“ oud be made fom high conduciviy Aluminium and pre-ted with oxide inhabiting
’
Tes rd. The design ol the compression type connectors should be such that galvanic comesion
composed, Conducor ough & tooling shallbe clearly joined on the connectors,
isi
form to the latest
Under local ambient
‘onnector shall be in
ional standards,
Conductors to ACSR
1 0 AAC conductors
‘and applications of such
Jor must hae atleast the same conductance as the conductor for which itis intended
Tre tod and shal cary he fl continuous curent rating ofthe conductor sie they are designed
‘
te
eral aly of contacts shall be maitsined through out the sence Ife of the connectors
Govssthage ad rao interence mustbe reduced to a rinimum evel Al coronene tre
rect shall be sulle fr instalation, using ether manual or hye
lic compressian oo's.
‘The size ofthe connettors fr different Conductors is as follows:
Grove Grove B ] ]
ax Min Wax Min) Lengtin
(rom) | (mm?) | (mm | mm) | em
t
ESR MERLINACSR NERLIN 5 150 185, 3801200
ACSRDOG/ ACSR DOG 120 95 120 | a0
‘AAC WASPI AAC WASPIPVG. 420 95 | Suitable for 120 mm?, | €3.00
Copper Cable To mm? 25 me |
PVC Copper Cable
ARC RNTTANG ANT 70 0 70 so] a0
BAC WASP I Service Bal 120 5 35 16 | s300 |
(AAC ANT Service Bal 70 50 3 Tar
T45 INFORMATION REQUIRED:
he Bite Wsntacuer as per tender requirements shall provide all information. Besides these,
‘oloving infrmaton has fo be submitted
a)
janulecuers Pied Catalogue describing specifeaton and technical data for ofred
Accessories,
3) Dimensional draing of offered Accessories,
Deal description testing facies at manulatuer’s plant
81 Manutacturers valid 1S 9001 Certificate,
TYPE Test;
j .
is Report of ceed H-Type Connector from an independent testing Laboraton/nsttute as per
Mg, Slandas (ness otherise specie);
“Factory Acceptance Test
Tp,
Ta
Scanned with CamScanner, examine and test the material
The purchaser shall have the right to inspect, exe Ss
conormity to the specification at all re aie ray a aracie"y be
i a good
manufacture’ premises. The Purchaser or is represen bee ry Wispe sa
it Was request fr the purchase import sipping docu he
rattan Sha check wsomdeee with Guaranteed Technical Particulars (Bp), "Sry
BPDB's Inspection Team nominal
manufacturers plant. Tests shal
ANSIASTM! BDS standards and shal
Guarantees of the Contract. All expenses
ted by the Purchaser will vitness the Factory to
be performed in accordance wih the elvan jc,
i be complied with offered Technical Parcuag®
{or such tests shall be bome by the Bidder. ad
. ime of Factory Test witness BPDB'S Inspection Team wil che
soutien vanteat othe testing! measuring equipment, meters etc issued by the cont
‘authority. If the calibration sealicertificate of the testing/ measuring equipment, meters et, ae
found ora the cabraton isnot dane win due time then BPDBSs Inspection Team wil ot nae
the test In that case the Bidder/ Manufacturer shall complete the calibration of the te
measuring equipment, meters etc. whi a reasonable period without any delay in delvery png
Jier shall have the testing facilities at manufacturers/suppler’s premises
Seon wih he suevant IECIBSIANSI Standards. The inspectors) shall sent the sae
‘material (selected by the Inspection Team) to CERS, BPOB/BUETICUET/KUETIRUETIDUET
Cary out any tess) pending due to lack of testing facilities at the manufacurersisuere
premises. All cost of testing including canying, loading, unloading etc wll be bore by the super
iF the sample(s) fais to confirm the specication, the full consignment will be rejected.
B, POST-DELIVERY INSPECTION & TESTING:
‘An inspection team shall perform post delivery inspection in presence of Supplier's representzie
after the delivery of the goods at designated stores of BPDB. The supplier shall arerge te
program of such inspection. Any defect or damage have been found at post-delivery inspecton te
defective or damaged materials/ goods are to be repaired/ replaced by the Bidder! supplier 2t tis
‘own cost within the stipulated time.
The purchasers right to inspect, test (where necessary) and reject the goods after delivery tte
designated stores of BPOB shall in no way be limited or waived by reason of the goods bara
Previously been inspected, tested and passed by the purchaser prior to the goods’ delivery.
The inspection team will check the physical conditions and quantity of the goods delivered. f
necessary, the inspection team wil collect samples on random sampling basis and sext te
UBTIKUETIRUETIDUET as selected by the Inspecion
ant Standard. If the tested sample(s) fail to coafim be
ignment will be rejected. All cost of testing including cain
'e by the supplier.
selected samples to CERS, BPDB/BUET/C|
team for performing tests as per relev.
Specifications in tests, the full consi
‘oading, un-oading etc, will be born
Scanned with CamScannere
TepiMleAL SPECIFICATIONS/REQUIREMENTS OF TemuwaL Lug
y_oeNeRAt 4 includ
1 n of the document includes the desi
is Sect Te eminal Lug a8 specified SM manufacture, testing @
inspection
an cuMATE bry
: ‘al Lug to be supplied against this tender shall be suit
rermndet the following climatic conditions: Suitable for satisfactory
Climate + Tropical, intense sunshine, heavy rain & hy
Maximum humidity and tem alae
simultaneously, 2 erature sometimes occu
exirum Temperature 2 doe
Minimum Temperature 03°C
Maximum yeaty weighted average > 30°C
Temperature
Relative humidity + 50-100%
‘Annual mean relative humidity 75%
‘Average annual ain fll 454mm
Naximum wind velocity 2 200 km hour
‘Average isokeraunic level + 80 days! year i
Nexium alitude above sea level 2 300 meters
‘Ammospheric, Mechanical and Chemical: — Moderately polluted
impurities ¥
Terminal Lug as specified will be installed in tropical locations and in 2 hot ‘
humid environment with presence of the insects and vermin. The information is,
given as a guide for Tender and no responsibility for its accuracy will be
accepted, nor will any claim based on the above be entertained
1.2.3 SYSTEM PARTICULARS:
,
hs | SYSTEM CHARACTERISTICS VOLTAGE LEVEL
[* | Normal System Voltage, KV 230 132 33 1
Voltage Class) a
[37 Maximum System Voltage, KV | 246 ice 36 2
System Frequency, Hz 50 50 50 a ;
rrsse Rotation RST RST RST
nti-Clock wise) sad
Type of System Grounding Solid Sond Sold sais
Rated Fault Level (3-Phase | 12550 6000
Symmetrical), MVA 3 sec. : iit TE
Basic Insulation Level, KV 750. 550
VOLTAGE 415) 240V CHARACTERISTICS: =|
Normal System Voltage, V 4151240
Woltage Class) [ .
[se
124 tion
“4 STANDARDS: the latest ed!
; he Terminal Lug as specified in this Section shall onto al re bient condos.
“s__0f the folowing standards for operation in overhead lines in 2 123
“SRV Tahsomer Aazensoren Aan PVG, GO-ST_OTW_ 2020
Co ; sll
Scanned with CamScanner1.25
1.2.6
rar
7.2.8
<<
Design, Manufacture, Testing and Perfomance of he Terminal Lug shall bein accor,
ro oe 3268 Part & BS.£579 Part 3 or equivalent Intemational standards. The stangca!
Conductor construction shallbe BS 6004: 1994 or equivalent fo any International standard!
Se high purty copper of the compression ty
These lugs shall be heavily tinned high purity B® profiled coy
sees. tebe for connection of stranded copper conductor bolt up fo 16 mm diameter, On
shall be tube type in one end & flat hole type, oF the other end. The lugs must have at eas ms
ara estar as the conductor fr which i's Ifended to be used and shall cay hehe
a mous cunt rating of he cable size they are designed fo.
‘The works shal be designed ensure continuity f service under ll wrkng contion at ey
as the first consideration and to facilitate inspection, maintenance and repairs. All Feasonatig
ign of equipment and of the works, to ensure the say
precautions shall be taken in the desi pi
personel concemed with the operation and mainienahoe of the works. All equipment supa
aor designed and be ofsuch quality s 0 requrng the minimum maintenance curing ser,
INFORMATION REQUIRED:
‘The Bidder Manufacturer es per fender requirements shal provide all information, Besides tus,
the following information has to be submited
2) Manufactures Printed Catalogue describing specification and technical data for otext
Accessories.
2) Dimensional drawing of offered Accessories.
b) Detail description of testing facies at manufacturer’ plant
) Manufacturers valid ISO 9001 Cerificate,
TYPE TEST?
Test Reports of offere
relevant Standards (unless otherwise specified);
TECHNICAL ORIENTATION AND QUALITY TEST WITNESS:
.d Terminal Lug from an independent testing Laboratory/Institu 2s p=
‘A. FACRORY ACCEPTANCE TEST:
‘The BPOB's inspection team proposed by the consignee and approved by the competent author
Lib i the right to inspect, examine and test the workmanship and performance of te
geodeinaeil fo cfm the cn to the specication at all resonable tie bebe
mmanclocuring proce al the manure premises. The team may ispet the goods during
material (ire ia “ ss and may also request for the purchase import shipping documents of 2¥
aired) and check those in accordance with Guaranteed Technical Pariclas (61?)
BPOB' i
P08 Inspection Team i wines te routine teat a the manufacturer’ penises. Tess shalte
Cer meng ee th the rebvant IECIBS/ANSVASTMVBDS standards oF cite
Contract document which shall be complied with the Guetaré
Technical Particulars (GTF
Contactor. (GTP) ofthe Contac. All expenses for such tests shall be bore bY
At the time of
{lon Test witness BPOB's inspecton Team wil check the catr?
sealberifcate of the :
The cones sal nau eg ng egument, meters ec. sued bythe competent aut
measuring equipment meters on ett anutacturer shall complete the caliration of the tes
belore the inspection of BPDB's team.
Schedule of inspect equipm
In, The cons ent wil be ready f ke
tend ea Aen eee al gee supa ry rtee nw
Snsignee is satisfied that any materialsfequipment s!
Scanned with CamScanner