Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
It is probably easier to use the Navisphere GUI to configure the Clariion but below are some of
the CLI commands that can be used to configure the SAN. There is also a procedure generator
which is very usefull called clarproc.exe which can be found on the www.emc.com web site
Raid Groups
example: navicli -h fc4700 createrg 16 0_0_0 0_0_1 0_0_2 -rm yes -pri
high
Creating a raid group
rgID = decimal raid group id
0_0_0 = bus_enclosure_disk
rm = delete raid group when last LUN is unbound
pri = expansion / defragmentation priority
navicli -h <san> chgrg rgID <options>
example: navicli -h fc4700 chgrg 16 -expand 0_0_4 0_0_5 -lex yes -pri
expanding a raid group
high
example: navicli -h fc4700 bind r5 3 -rg 0 -rc 1 -wc 1 -sq mb -cap 250
Storage Groups
Cache Configuration
get cache information navicli -h fc4700 getcache
navicli -h fc4700 setcache -wsza 550 -rsza 100 -wszb 100 -rszb 100
wsza = SPA write cache in MB
rsza = SPA read cache in MB
wszb = SPB write cache in MB
Configure the cache rszb = SPB read cache in MB
p = page size (2, 4, 8 or 16)
l = low watermark
h = high watermark
wc/rc = disable/enable read/write cache
wca/rca = disable/enable read/write SPA cache